* [PATCH v2 0/5] MIPS: Implement eBPF JIT.
@ 2017-06-13 22:28 ` David Daney
0 siblings, 0 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
Changes in v2:
- Squash a couple of the uasm cleanups.
- Make insn_table_MM const (suggested by Matt Redfearn)
- Put the eBPF in its own source file (should fix build
warnings/errors on 32-bit kernel builds).
- Use bpf_jit_binary_alloc() (suggested by Daniel Borkmann)
- Implement tail calls.
- Fix system call tracing to extract arguments for
kprobe/__seccomp_filter() tracing (perhaps not really part the the
JIT, but necessary to have fun with the samples/bpf programs).
Most things in samples/bpf work, still working on the incantations to
build tools/testing/selftests/bpf/ ...
>From v1:
The first three patches improve MIPS uasm in preparation for use by
the JIT. Then the eBPF JIT implementation.
I am CCing netdev@ and the BPF maintainers for their comments, but
would expect Ralf to merge via the MIPS tree if and when it all looks
good.
David Daney (5):
MIPS: Optimize uasm insn lookup.
MIPS: Correctly define DBSHFL type instruction opcodes.
MIPS: Add some instructions to uasm.
MIPS: Add support for eBPF JIT.
MIPS: Give __secure_computing() access to syscall arguments.
arch/mips/Kconfig | 12 +-
arch/mips/include/asm/uasm.h | 30 +
arch/mips/include/uapi/asm/inst.h | 9 +-
arch/mips/kernel/ptrace.c | 22 +-
arch/mips/mm/uasm-micromips.c | 188 ++--
arch/mips/mm/uasm-mips.c | 238 ++---
arch/mips/mm/uasm.c | 61 +-
arch/mips/net/Makefile | 3 +-
arch/mips/net/ebpf_jit.c | 1949 +++++++++++++++++++++++++++++++++++++
9 files changed, 2285 insertions(+), 227 deletions(-)
create mode 100644 arch/mips/net/ebpf_jit.c
--
2.9.4
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 0/5] MIPS: Implement eBPF JIT.
@ 2017-06-13 22:28 ` David Daney
0 siblings, 0 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
Changes in v2:
- Squash a couple of the uasm cleanups.
- Make insn_table_MM const (suggested by Matt Redfearn)
- Put the eBPF in its own source file (should fix build
warnings/errors on 32-bit kernel builds).
- Use bpf_jit_binary_alloc() (suggested by Daniel Borkmann)
- Implement tail calls.
- Fix system call tracing to extract arguments for
kprobe/__seccomp_filter() tracing (perhaps not really part the the
JIT, but necessary to have fun with the samples/bpf programs).
Most things in samples/bpf work, still working on the incantations to
build tools/testing/selftests/bpf/ ...
From v1:
The first three patches improve MIPS uasm in preparation for use by
the JIT. Then the eBPF JIT implementation.
I am CCing netdev@ and the BPF maintainers for their comments, but
would expect Ralf to merge via the MIPS tree if and when it all looks
good.
David Daney (5):
MIPS: Optimize uasm insn lookup.
MIPS: Correctly define DBSHFL type instruction opcodes.
MIPS: Add some instructions to uasm.
MIPS: Add support for eBPF JIT.
MIPS: Give __secure_computing() access to syscall arguments.
arch/mips/Kconfig | 12 +-
arch/mips/include/asm/uasm.h | 30 +
arch/mips/include/uapi/asm/inst.h | 9 +-
arch/mips/kernel/ptrace.c | 22 +-
arch/mips/mm/uasm-micromips.c | 188 ++--
arch/mips/mm/uasm-mips.c | 238 ++---
arch/mips/mm/uasm.c | 61 +-
arch/mips/net/Makefile | 3 +-
arch/mips/net/ebpf_jit.c | 1949 +++++++++++++++++++++++++++++++++++++
9 files changed, 2285 insertions(+), 227 deletions(-)
create mode 100644 arch/mips/net/ebpf_jit.c
--
2.9.4
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 0/5] MIPS: Implement eBPF JIT.
@ 2017-06-13 22:28 ` David Daney
0 siblings, 0 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
Changes in v2:
- Squash a couple of the uasm cleanups.
- Make insn_table_MM const (suggested by Matt Redfearn)
- Put the eBPF in its own source file (should fix build
warnings/errors on 32-bit kernel builds).
- Use bpf_jit_binary_alloc() (suggested by Daniel Borkmann)
- Implement tail calls.
- Fix system call tracing to extract arguments for
kprobe/__seccomp_filter() tracing (perhaps not really part the the
JIT, but necessary to have fun with the samples/bpf programs).
Most things in samples/bpf work, still working on the incantations to
build tools/testing/selftests/bpf/ ...
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v2 1/5] MIPS: Optimize uasm insn lookup.
2017-06-13 22:28 ` David Daney
(?)
(?)
@ 2017-06-13 22:28 ` David Daney
-1 siblings, 0 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
Instead of doing a linear search through the insn_table for each
instruction, use the opcode as direct index into the table. This will
give constant time lookup performance as the number of supported
opcodes increases. Make the tables const as they are only ever read.
For uasm-mips.c sort the table alphabetically, and remove duplicate
entries, uasm-micromips.c was already sorted and duplicate free.
There is a small savings in object size as struct insn loses a field:
$ size arch/mips/mm/uasm-mips.o arch/mips/mm/uasm-mips.o.save
text data bss dec hex filename
10040 0 0 10040 2738 arch/mips/mm/uasm-mips.o
9240 1120 0 10360 2878 arch/mips/mm/uasm-mips.o.save
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/mips/mm/uasm-micromips.c | 188 ++++++++++++++++++------------------
arch/mips/mm/uasm-mips.c | 217 +++++++++++++++++++++---------------------
arch/mips/mm/uasm.c | 3 +-
3 files changed, 199 insertions(+), 209 deletions(-)
diff --git a/arch/mips/mm/uasm-micromips.c b/arch/mips/mm/uasm-micromips.c
index 277cf52..c28ff53 100644
--- a/arch/mips/mm/uasm-micromips.c
+++ b/arch/mips/mm/uasm-micromips.c
@@ -40,93 +40,92 @@
#include "uasm.c"
-static struct insn insn_table_MM[] = {
- { insn_addu, M(mm_pool32a_op, 0, 0, 0, 0, mm_addu32_op), RT | RS | RD },
- { insn_addiu, M(mm_addiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_and, M(mm_pool32a_op, 0, 0, 0, 0, mm_and_op), RT | RS | RD },
- { insn_andi, M(mm_andi32_op, 0, 0, 0, 0, 0), RT | RS | UIMM },
- { insn_beq, M(mm_beq32_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_beql, 0, 0 },
- { insn_bgez, M(mm_pool32i_op, mm_bgez_op, 0, 0, 0, 0), RS | BIMM },
- { insn_bgezl, 0, 0 },
- { insn_bltz, M(mm_pool32i_op, mm_bltz_op, 0, 0, 0, 0), RS | BIMM },
- { insn_bltzl, 0, 0 },
- { insn_bne, M(mm_bne32_op, 0, 0, 0, 0, 0), RT | RS | BIMM },
- { insn_cache, M(mm_pool32b_op, 0, 0, mm_cache_func, 0, 0), RT | RS | SIMM },
- { insn_cfc1, M(mm_pool32f_op, 0, 0, 0, mm_cfc1_op, mm_32f_73_op), RT | RS },
- { insn_cfcmsa, M(mm_pool32s_op, 0, msa_cfc_op, 0, 0, mm_32s_elm_op), RD | RE },
- { insn_ctc1, M(mm_pool32f_op, 0, 0, 0, mm_ctc1_op, mm_32f_73_op), RT | RS },
- { insn_ctcmsa, M(mm_pool32s_op, 0, msa_ctc_op, 0, 0, mm_32s_elm_op), RD | RE },
- { insn_daddu, 0, 0 },
- { insn_daddiu, 0, 0 },
- { insn_di, M(mm_pool32a_op, 0, 0, 0, mm_di_op, mm_pool32axf_op), RS },
- { insn_divu, M(mm_pool32a_op, 0, 0, 0, mm_divu_op, mm_pool32axf_op), RT | RS },
- { insn_dmfc0, 0, 0 },
- { insn_dmtc0, 0, 0 },
- { insn_dsll, 0, 0 },
- { insn_dsll32, 0, 0 },
- { insn_dsra, 0, 0 },
- { insn_dsrl, 0, 0 },
- { insn_dsrl32, 0, 0 },
- { insn_drotr, 0, 0 },
- { insn_drotr32, 0, 0 },
- { insn_dsubu, 0, 0 },
- { insn_eret, M(mm_pool32a_op, 0, 0, 0, mm_eret_op, mm_pool32axf_op), 0 },
- { insn_ins, M(mm_pool32a_op, 0, 0, 0, 0, mm_ins_op), RT | RS | RD | RE },
- { insn_ext, M(mm_pool32a_op, 0, 0, 0, 0, mm_ext_op), RT | RS | RD | RE },
- { insn_j, M(mm_j32_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jal, M(mm_jal32_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jalr, M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RT | RS },
- { insn_jr, M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RS },
- { insn_lb, M(mm_lb32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_ld, 0, 0 },
- { insn_lh, M(mm_lh32_op, 0, 0, 0, 0, 0), RS | RS | SIMM },
- { insn_ll, M(mm_pool32c_op, 0, 0, (mm_ll_func << 1), 0, 0), RS | RT | SIMM },
- { insn_lld, 0, 0 },
- { insn_lui, M(mm_pool32i_op, mm_lui_op, 0, 0, 0, 0), RS | SIMM },
- { insn_lw, M(mm_lw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_mfc0, M(mm_pool32a_op, 0, 0, 0, mm_mfc0_op, mm_pool32axf_op), RT | RS | RD },
- { insn_mfhi, M(mm_pool32a_op, 0, 0, 0, mm_mfhi32_op, mm_pool32axf_op), RS },
- { insn_mflo, M(mm_pool32a_op, 0, 0, 0, mm_mflo32_op, mm_pool32axf_op), RS },
- { insn_mtc0, M(mm_pool32a_op, 0, 0, 0, mm_mtc0_op, mm_pool32axf_op), RT | RS | RD },
- { insn_mthi, M(mm_pool32a_op, 0, 0, 0, mm_mthi32_op, mm_pool32axf_op), RS },
- { insn_mtlo, M(mm_pool32a_op, 0, 0, 0, mm_mtlo32_op, mm_pool32axf_op), RS },
- { insn_mul, M(mm_pool32a_op, 0, 0, 0, 0, mm_mul_op), RT | RS | RD },
- { insn_or, M(mm_pool32a_op, 0, 0, 0, 0, mm_or32_op), RT | RS | RD },
- { insn_ori, M(mm_ori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM },
- { insn_pref, M(mm_pool32c_op, 0, 0, (mm_pref_func << 1), 0, 0), RT | RS | SIMM },
- { insn_rfe, 0, 0 },
- { insn_sc, M(mm_pool32c_op, 0, 0, (mm_sc_func << 1), 0, 0), RT | RS | SIMM },
- { insn_scd, 0, 0 },
- { insn_sd, 0, 0 },
- { insn_sll, M(mm_pool32a_op, 0, 0, 0, 0, mm_sll32_op), RT | RS | RD },
- { insn_sllv, M(mm_pool32a_op, 0, 0, 0, 0, mm_sllv32_op), RT | RS | RD },
- { insn_slt, M(mm_pool32a_op, 0, 0, 0, 0, mm_slt_op), RT | RS | RD },
- { insn_sltiu, M(mm_sltiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_sltu, M(mm_pool32a_op, 0, 0, 0, 0, mm_sltu_op), RT | RS | RD },
- { insn_sra, M(mm_pool32a_op, 0, 0, 0, 0, mm_sra_op), RT | RS | RD },
- { insn_srl, M(mm_pool32a_op, 0, 0, 0, 0, mm_srl32_op), RT | RS | RD },
- { insn_srlv, M(mm_pool32a_op, 0, 0, 0, 0, mm_srlv32_op), RT | RS | RD },
- { insn_rotr, M(mm_pool32a_op, 0, 0, 0, 0, mm_rotr_op), RT | RS | RD },
- { insn_subu, M(mm_pool32a_op, 0, 0, 0, 0, mm_subu32_op), RT | RS | RD },
- { insn_sw, M(mm_sw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM },
- { insn_sync, M(mm_pool32a_op, 0, 0, 0, mm_sync_op, mm_pool32axf_op), RS },
- { insn_tlbp, M(mm_pool32a_op, 0, 0, 0, mm_tlbp_op, mm_pool32axf_op), 0 },
- { insn_tlbr, M(mm_pool32a_op, 0, 0, 0, mm_tlbr_op, mm_pool32axf_op), 0 },
- { insn_tlbwi, M(mm_pool32a_op, 0, 0, 0, mm_tlbwi_op, mm_pool32axf_op), 0 },
- { insn_tlbwr, M(mm_pool32a_op, 0, 0, 0, mm_tlbwr_op, mm_pool32axf_op), 0 },
- { insn_wait, M(mm_pool32a_op, 0, 0, 0, mm_wait_op, mm_pool32axf_op), SCIMM },
- { insn_wsbh, M(mm_pool32a_op, 0, 0, 0, mm_wsbh_op, mm_pool32axf_op), RT | RS },
- { insn_xor, M(mm_pool32a_op, 0, 0, 0, 0, mm_xor32_op), RT | RS | RD },
- { insn_xori, M(mm_xori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM },
- { insn_dins, 0, 0 },
- { insn_dinsm, 0, 0 },
- { insn_syscall, M(mm_pool32a_op, 0, 0, 0, mm_syscall_op, mm_pool32axf_op), SCIMM},
- { insn_bbit0, 0, 0 },
- { insn_bbit1, 0, 0 },
- { insn_lwx, 0, 0 },
- { insn_ldx, 0, 0 },
- { insn_invalid, 0, 0 }
+static const struct insn const insn_table_MM[insn_invalid] = {
+ [insn_addu] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_addu32_op), RT | RS | RD},
+ [insn_addiu] = {M(mm_addiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_and] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_and_op), RT | RS | RD},
+ [insn_andi] = {M(mm_andi32_op, 0, 0, 0, 0, 0), RT | RS | UIMM},
+ [insn_beq] = {M(mm_beq32_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_beql] = {0, 0},
+ [insn_bgez] = {M(mm_pool32i_op, mm_bgez_op, 0, 0, 0, 0), RS | BIMM},
+ [insn_bgezl] = {0, 0},
+ [insn_bltz] = {M(mm_pool32i_op, mm_bltz_op, 0, 0, 0, 0), RS | BIMM},
+ [insn_bltzl] = {0, 0},
+ [insn_bne] = {M(mm_bne32_op, 0, 0, 0, 0, 0), RT | RS | BIMM},
+ [insn_cache] = {M(mm_pool32b_op, 0, 0, mm_cache_func, 0, 0), RT | RS | SIMM},
+ [insn_cfc1] = {M(mm_pool32f_op, 0, 0, 0, mm_cfc1_op, mm_32f_73_op), RT | RS},
+ [insn_cfcmsa] = {M(mm_pool32s_op, 0, msa_cfc_op, 0, 0, mm_32s_elm_op), RD | RE},
+ [insn_ctc1] = {M(mm_pool32f_op, 0, 0, 0, mm_ctc1_op, mm_32f_73_op), RT | RS},
+ [insn_ctcmsa] = {M(mm_pool32s_op, 0, msa_ctc_op, 0, 0, mm_32s_elm_op), RD | RE},
+ [insn_daddu] = {0, 0},
+ [insn_daddiu] = {0, 0},
+ [insn_di] = {M(mm_pool32a_op, 0, 0, 0, mm_di_op, mm_pool32axf_op), RS},
+ [insn_divu] = {M(mm_pool32a_op, 0, 0, 0, mm_divu_op, mm_pool32axf_op), RT | RS},
+ [insn_dmfc0] = {0, 0},
+ [insn_dmtc0] = {0, 0},
+ [insn_dsll] = {0, 0},
+ [insn_dsll32] = {0, 0},
+ [insn_dsra] = {0, 0},
+ [insn_dsrl] = {0, 0},
+ [insn_dsrl32] = {0, 0},
+ [insn_drotr] = {0, 0},
+ [insn_drotr32] = {0, 0},
+ [insn_dsubu] = {0, 0},
+ [insn_eret] = {M(mm_pool32a_op, 0, 0, 0, mm_eret_op, mm_pool32axf_op), 0},
+ [insn_ins] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_ins_op), RT | RS | RD | RE},
+ [insn_ext] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_ext_op), RT | RS | RD | RE},
+ [insn_j] = {M(mm_j32_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jal] = {M(mm_jal32_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jalr] = {M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RT | RS},
+ [insn_jr] = {M(mm_pool32a_op, 0, 0, 0, mm_jalr_op, mm_pool32axf_op), RS},
+ [insn_lb] = {M(mm_lb32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_ld] = {0, 0},
+ [insn_lh] = {M(mm_lh32_op, 0, 0, 0, 0, 0), RS | RS | SIMM},
+ [insn_ll] = {M(mm_pool32c_op, 0, 0, (mm_ll_func << 1), 0, 0), RS | RT | SIMM},
+ [insn_lld] = {0, 0},
+ [insn_lui] = {M(mm_pool32i_op, mm_lui_op, 0, 0, 0, 0), RS | SIMM},
+ [insn_lw] = {M(mm_lw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_mfc0] = {M(mm_pool32a_op, 0, 0, 0, mm_mfc0_op, mm_pool32axf_op), RT | RS | RD},
+ [insn_mfhi] = {M(mm_pool32a_op, 0, 0, 0, mm_mfhi32_op, mm_pool32axf_op), RS},
+ [insn_mflo] = {M(mm_pool32a_op, 0, 0, 0, mm_mflo32_op, mm_pool32axf_op), RS},
+ [insn_mtc0] = {M(mm_pool32a_op, 0, 0, 0, mm_mtc0_op, mm_pool32axf_op), RT | RS | RD},
+ [insn_mthi] = {M(mm_pool32a_op, 0, 0, 0, mm_mthi32_op, mm_pool32axf_op), RS},
+ [insn_mtlo] = {M(mm_pool32a_op, 0, 0, 0, mm_mtlo32_op, mm_pool32axf_op), RS},
+ [insn_mul] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_mul_op), RT | RS | RD},
+ [insn_or] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_or32_op), RT | RS | RD},
+ [insn_ori] = {M(mm_ori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM},
+ [insn_pref] = {M(mm_pool32c_op, 0, 0, (mm_pref_func << 1), 0, 0), RT | RS | SIMM},
+ [insn_rfe] = {0, 0},
+ [insn_sc] = {M(mm_pool32c_op, 0, 0, (mm_sc_func << 1), 0, 0), RT | RS | SIMM},
+ [insn_scd] = {0, 0},
+ [insn_sd] = {0, 0},
+ [insn_sll] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sll32_op), RT | RS | RD},
+ [insn_sllv] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sllv32_op), RT | RS | RD},
+ [insn_slt] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_slt_op), RT | RS | RD},
+ [insn_sltiu] = {M(mm_sltiu32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_sltu] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sltu_op), RT | RS | RD},
+ [insn_sra] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_sra_op), RT | RS | RD},
+ [insn_srl] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_srl32_op), RT | RS | RD},
+ [insn_srlv] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_srlv32_op), RT | RS | RD},
+ [insn_rotr] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_rotr_op), RT | RS | RD},
+ [insn_subu] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_subu32_op), RT | RS | RD},
+ [insn_sw] = {M(mm_sw32_op, 0, 0, 0, 0, 0), RT | RS | SIMM},
+ [insn_sync] = {M(mm_pool32a_op, 0, 0, 0, mm_sync_op, mm_pool32axf_op), RS},
+ [insn_tlbp] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbp_op, mm_pool32axf_op), 0},
+ [insn_tlbr] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbr_op, mm_pool32axf_op), 0},
+ [insn_tlbwi] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbwi_op, mm_pool32axf_op), 0},
+ [insn_tlbwr] = {M(mm_pool32a_op, 0, 0, 0, mm_tlbwr_op, mm_pool32axf_op), 0},
+ [insn_wait] = {M(mm_pool32a_op, 0, 0, 0, mm_wait_op, mm_pool32axf_op), SCIMM},
+ [insn_wsbh] = {M(mm_pool32a_op, 0, 0, 0, mm_wsbh_op, mm_pool32axf_op), RT | RS},
+ [insn_xor] = {M(mm_pool32a_op, 0, 0, 0, 0, mm_xor32_op), RT | RS | RD},
+ [insn_xori] = {M(mm_xori32_op, 0, 0, 0, 0, 0), RT | RS | UIMM},
+ [insn_dins] = {0, 0},
+ [insn_dinsm] = {0, 0},
+ [insn_syscall] = {M(mm_pool32a_op, 0, 0, 0, mm_syscall_op, mm_pool32axf_op), SCIMM},
+ [insn_bbit0] = {0, 0},
+ [insn_bbit1] = {0, 0},
+ [insn_lwx] = {0, 0},
+ [insn_ldx] = {0, 0},
};
#undef M
@@ -156,20 +155,17 @@ static inline u32 build_jimm(u32 arg)
*/
static void build_insn(u32 **buf, enum opcode opc, ...)
{
- struct insn *ip = NULL;
- unsigned int i;
+ const struct insn *ip;
va_list ap;
u32 op;
- for (i = 0; insn_table_MM[i].opcode != insn_invalid; i++)
- if (insn_table_MM[i].opcode == opc) {
- ip = &insn_table_MM[i];
- break;
- }
-
- if (!ip || (opc == insn_daddiu && r4k_daddiu_bug()))
+ if (opc < 0 || opc >= insn_invalid ||
+ (opc == insn_daddiu && r4k_daddiu_bug()) ||
+ (insn_table_MM[opc].match == 0 && insn_table_MM[opc].fields == 0))
panic("Unsupported Micro-assembler instruction %d", opc);
+ ip = &insn_table_MM[opc];
+
op = ip->match;
va_start(ap, opc);
if (ip->fields & RS) {
diff --git a/arch/mips/mm/uasm-mips.c b/arch/mips/mm/uasm-mips.c
index 2277499..f3937e3 100644
--- a/arch/mips/mm/uasm-mips.c
+++ b/arch/mips/mm/uasm-mips.c
@@ -48,126 +48,124 @@
#include "uasm.c"
-static struct insn insn_table[] = {
- { insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD },
- { insn_andi, M(andi_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
- { insn_bbit0, M(lwc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_bbit1, M(swc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_beql, M(beql_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_beq, M(beq_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
- { insn_bgezl, M(bcond_op, 0, bgezl_op, 0, 0, 0), RS | BIMM },
- { insn_bgez, M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM },
- { insn_bltzl, M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM },
- { insn_bltz, M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM },
- { insn_bne, M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
+static const struct insn const insn_table[insn_invalid] = {
+ [insn_addiu] = {M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_addu] = {M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD},
+ [insn_and] = {M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD},
+ [insn_andi] = {M(andi_op, 0, 0, 0, 0, 0), RS | RT | UIMM},
+ [insn_bbit0] = {M(lwc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_bbit1] = {M(swc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_beq] = {M(beq_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_beql] = {M(beql_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_bgez] = {M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM},
+ [insn_bgezl] = {M(bcond_op, 0, bgezl_op, 0, 0, 0), RS | BIMM},
+ [insn_bltz] = {M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM},
+ [insn_bltzl] = {M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM},
+ [insn_bne] = {M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
#ifndef CONFIG_CPU_MIPSR6
- { insn_cache, M(cache_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_cache] = {M(cache_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_cache, M6(spec3_op, 0, 0, 0, cache6_op), RS | RT | SIMM9 },
+ [insn_cache] = {M6(spec3_op, 0, 0, 0, cache6_op), RS | RT | SIMM9},
#endif
- { insn_cfc1, M(cop1_op, cfc_op, 0, 0, 0, 0), RT | RD },
- { insn_cfcmsa, M(msa_op, 0, msa_cfc_op, 0, 0, msa_elm_op), RD | RE },
- { insn_ctc1, M(cop1_op, ctc_op, 0, 0, 0, 0), RT | RD },
- { insn_ctcmsa, M(msa_op, 0, msa_ctc_op, 0, 0, msa_elm_op), RD | RE },
- { insn_daddiu, M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_daddu, M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD },
- { insn_dinsm, M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE },
- { insn_di, M(cop0_op, mfmc0_op, 0, 12, 0, 0), RT },
- { insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
- { insn_divu, M(spec_op, 0, 0, 0, 0, divu_op), RS | RT },
- { insn_dmfc0, M(cop0_op, dmfc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_dmtc0, M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
- { insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE },
- { insn_dsll32, M(spec_op, 0, 0, 0, 0, dsll32_op), RT | RD | RE },
- { insn_dsll, M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE },
- { insn_dsra, M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE },
- { insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE },
- { insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE },
- { insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
- { insn_eret, M(cop0_op, cop_op, 0, 0, 0, eret_op), 0 },
- { insn_ext, M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE },
- { insn_ins, M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE },
- { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
- { insn_jalr, M(spec_op, 0, 0, 0, 0, jalr_op), RS | RD },
- { insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
+ [insn_cfc1] = {M(cop1_op, cfc_op, 0, 0, 0, 0), RT | RD},
+ [insn_cfcmsa] = {M(msa_op, 0, msa_cfc_op, 0, 0, msa_elm_op), RD | RE},
+ [insn_ctc1] = {M(cop1_op, ctc_op, 0, 0, 0, 0), RT | RD},
+ [insn_ctcmsa] = {M(msa_op, 0, msa_ctc_op, 0, 0, msa_elm_op), RD | RE},
+ [insn_daddiu] = {M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_daddu] = {M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD},
+ [insn_di] = {M(cop0_op, mfmc0_op, 0, 12, 0, 0), RT},
+ [insn_dins] = {M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE},
+ [insn_dinsm] = {M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE},
+ [insn_divu] = {M(spec_op, 0, 0, 0, 0, divu_op), RS | RT},
+ [insn_dmfc0] = {M(cop0_op, dmfc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_dmtc0] = {M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_drotr] = {M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE},
+ [insn_drotr32] = {M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE},
+ [insn_dsll] = {M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE},
+ [insn_dsll32] = {M(spec_op, 0, 0, 0, 0, dsll32_op), RT | RD | RE},
+ [insn_dsra] = {M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE},
+ [insn_dsrl] = {M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE},
+ [insn_dsrl32] = {M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE},
+ [insn_dsubu] = {M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD},
+ [insn_eret] = {M(cop0_op, cop_op, 0, 0, 0, eret_op), 0},
+ [insn_ext] = {M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE},
+ [insn_ins] = {M(spec3_op, 0, 0, 0, 0, ins_op), RS | RT | RD | RE},
+ [insn_j] = {M(j_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jal] = {M(jal_op, 0, 0, 0, 0, 0), JIMM},
+ [insn_jalr] = {M(spec_op, 0, 0, 0, 0, jalr_op), RS | RD},
#ifndef CONFIG_CPU_MIPSR6
- { insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
+ [insn_jr] = {M(spec_op, 0, 0, 0, 0, jr_op), RS},
#else
- { insn_jr, M(spec_op, 0, 0, 0, 0, jalr_op), RS },
+ [insn_jr] = {M(spec_op, 0, 0, 0, 0, jalr_op), RS},
#endif
- { insn_lb, M(lb_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_ld, M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_ldx, M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD },
- { insn_lh, M(lh_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_lhu, M(lhu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_lb] = {M(lb_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_ld] = {M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lddir] = {M(lwc2_op, 0, 0, 0, lddir_op, mult_op), RS | RT | RD},
+ [insn_ldpte] = {M(lwc2_op, 0, 0, 0, ldpte_op, mult_op), RS | RD},
+ [insn_ldx] = {M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD},
+ [insn_lh] = {M(lh_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lhu] = {M(lhu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#ifndef CONFIG_CPU_MIPSR6
- { insn_lld, M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_ll, M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_ll] = {M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lld] = {M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_lld, M6(spec3_op, 0, 0, 0, lld6_op), RS | RT | SIMM9 },
- { insn_ll, M6(spec3_op, 0, 0, 0, ll6_op), RS | RT | SIMM9 },
+ [insn_ll] = {M6(spec3_op, 0, 0, 0, ll6_op), RS | RT | SIMM9},
+ [insn_lld] = {M6(spec3_op, 0, 0, 0, lld6_op), RS | RT | SIMM9},
#endif
- { insn_lui, M(lui_op, 0, 0, 0, 0, 0), RT | SIMM },
- { insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD },
- { insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mfhc0, M(cop0_op, mfhc0_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mfhi, M(spec_op, 0, 0, 0, 0, mfhi_op), RD },
- { insn_mflo, M(spec_op, 0, 0, 0, 0, mflo_op), RD },
- { insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mthc0, M(cop0_op, mthc0_op, 0, 0, 0, 0), RT | RD | SET},
- { insn_mthi, M(spec_op, 0, 0, 0, 0, mthi_op), RS },
- { insn_mtlo, M(spec_op, 0, 0, 0, 0, mtlo_op), RS },
+ [insn_lui] = {M(lui_op, 0, 0, 0, 0, 0), RT | SIMM},
+ [insn_lw] = {M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lwx] = {M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD},
+ [insn_mfc0] = {M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mfhc0] = {M(cop0_op, mfhc0_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mfhi] = {M(spec_op, 0, 0, 0, 0, mfhi_op), RD},
+ [insn_mflo] = {M(spec_op, 0, 0, 0, 0, mflo_op), RD},
+ [insn_mtc0] = {M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mthc0] = {M(cop0_op, mthc0_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_mthi] = {M(spec_op, 0, 0, 0, 0, mthi_op), RS},
+ [insn_mtlo] = {M(spec_op, 0, 0, 0, 0, mtlo_op), RS},
#ifndef CONFIG_CPU_MIPSR6
- { insn_mul, M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
+ [insn_mul] = {M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
#else
- { insn_mul, M(spec_op, 0, 0, 0, mult_mul_op, mult_op), RS | RT | RD},
+ [insn_mul] = {M(spec_op, 0, 0, 0, mult_mul_op, mult_op), RS | RT | RD},
#endif
- { insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
+ [insn_or] = {M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD},
+ [insn_ori] = {M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM},
#ifndef CONFIG_CPU_MIPSR6
- { insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_pref] = {M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_pref, M6(spec3_op, 0, 0, 0, pref6_op), RS | RT | SIMM9 },
+ [insn_pref] = {M6(spec3_op, 0, 0, 0, pref6_op), RS | RT | SIMM9},
#endif
- { insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 },
- { insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE },
+ [insn_rfe] = {M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0},
+ [insn_rotr] = {M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE},
#ifndef CONFIG_CPU_MIPSR6
- { insn_scd, M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sc, M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
+ [insn_sc] = {M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_scd] = {M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
- { insn_scd, M6(spec3_op, 0, 0, 0, scd6_op), RS | RT | SIMM9 },
- { insn_sc, M6(spec3_op, 0, 0, 0, sc6_op), RS | RT | SIMM9 },
+ [insn_sc] = {M6(spec3_op, 0, 0, 0, sc6_op), RS | RT | SIMM9},
+ [insn_scd] = {M6(spec3_op, 0, 0, 0, scd6_op), RS | RT | SIMM9},
#endif
- { insn_sd, M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE },
- { insn_sllv, M(spec_op, 0, 0, 0, 0, sllv_op), RS | RT | RD },
- { insn_slt, M(spec_op, 0, 0, 0, 0, slt_op), RS | RT | RD },
- { insn_sltiu, M(sltiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sltu, M(spec_op, 0, 0, 0, 0, sltu_op), RS | RT | RD },
- { insn_sra, M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE },
- { insn_srl, M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE },
- { insn_srlv, M(spec_op, 0, 0, 0, 0, srlv_op), RS | RT | RD },
- { insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD },
- { insn_sw, M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
- { insn_sync, M(spec_op, 0, 0, 0, 0, sync_op), RE },
- { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
- { insn_tlbp, M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0 },
- { insn_tlbr, M(cop0_op, cop_op, 0, 0, 0, tlbr_op), 0 },
- { insn_tlbwi, M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0 },
- { insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 },
- { insn_wait, M(cop0_op, cop_op, 0, 0, 0, wait_op), SCIMM },
- { insn_wsbh, M(spec3_op, 0, 0, 0, wsbh_op, bshfl_op), RT | RD },
- { insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
- { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
- { insn_yield, M(spec3_op, 0, 0, 0, 0, yield_op), RS | RD },
- { insn_ldpte, M(lwc2_op, 0, 0, 0, ldpte_op, mult_op), RS | RD },
- { insn_lddir, M(lwc2_op, 0, 0, 0, lddir_op, mult_op), RS | RT | RD },
- { insn_invalid, 0, 0 }
+ [insn_sd] = {M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sll] = {M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE},
+ [insn_sllv] = {M(spec_op, 0, 0, 0, 0, sllv_op), RS | RT | RD},
+ [insn_slt] = {M(spec_op, 0, 0, 0, 0, slt_op), RS | RT | RD},
+ [insn_sltiu] = {M(sltiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sltu] = {M(spec_op, 0, 0, 0, 0, sltu_op), RS | RT | RD},
+ [insn_sra] = {M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE},
+ [insn_srl] = {M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE},
+ [insn_srlv] = {M(spec_op, 0, 0, 0, 0, srlv_op), RS | RT | RD},
+ [insn_subu] = {M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD},
+ [insn_sw] = {M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sync] = {M(spec_op, 0, 0, 0, 0, sync_op), RE},
+ [insn_syscall] = {M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
+ [insn_tlbp] = {M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0},
+ [insn_tlbr] = {M(cop0_op, cop_op, 0, 0, 0, tlbr_op), 0},
+ [insn_tlbwi] = {M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0},
+ [insn_tlbwr] = {M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0},
+ [insn_wait] = {M(cop0_op, cop_op, 0, 0, 0, wait_op), SCIMM},
+ [insn_wsbh] = {M(spec3_op, 0, 0, 0, wsbh_op, bshfl_op), RT | RD},
+ [insn_xor] = {M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD},
+ [insn_xori] = {M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM},
+ [insn_yield] = {M(spec3_op, 0, 0, 0, 0, yield_op), RS | RD},
};
#undef M
@@ -196,20 +194,17 @@ static inline u32 build_jimm(u32 arg)
*/
static void build_insn(u32 **buf, enum opcode opc, ...)
{
- struct insn *ip = NULL;
- unsigned int i;
+ const struct insn *ip;
va_list ap;
u32 op;
- for (i = 0; insn_table[i].opcode != insn_invalid; i++)
- if (insn_table[i].opcode == opc) {
- ip = &insn_table[i];
- break;
- }
-
- if (!ip || (opc == insn_daddiu && r4k_daddiu_bug()))
+ if (opc < 0 || opc >= insn_invalid ||
+ (opc == insn_daddiu && r4k_daddiu_bug()) ||
+ (insn_table[opc].match == 0 && insn_table[opc].fields == 0))
panic("Unsupported Micro-assembler instruction %d", opc);
+ ip = &insn_table[opc];
+
op = ip->match;
va_start(ap, opc);
if (ip->fields & RS)
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 730363b..f23ed85 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -46,7 +46,6 @@ enum fields {
#define SIMM9_MASK 0x1ff
enum opcode {
- insn_invalid,
insn_addiu, insn_addu, insn_and, insn_andi, insn_bbit0, insn_bbit1,
insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
insn_bne, insn_cache, insn_cfc1, insn_cfcmsa, insn_ctc1, insn_ctcmsa,
@@ -62,10 +61,10 @@ enum opcode {
insn_srlv, insn_subu, insn_sw, insn_sync, insn_syscall, insn_tlbp,
insn_tlbr, insn_tlbwi, insn_tlbwr, insn_wait, insn_wsbh, insn_xor,
insn_xori, insn_yield, insn_lddir, insn_ldpte, insn_lhu,
+ insn_invalid /* insn_invalid must be last */
};
struct insn {
- enum opcode opcode;
u32 match;
enum fields fields;
};
--
2.9.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 2/5] MIPS: Correctly define DBSHFL type instruction opcodes.
2017-06-13 22:28 ` David Daney
` (2 preceding siblings ...)
(?)
@ 2017-06-13 22:28 ` David Daney
-1 siblings, 0 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
DSHD was incorrectly classified as being BSHFL, and DSHD was missing
altogether.
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/mips/include/uapi/asm/inst.h | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index b5e46ae..e5f5385 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -276,12 +276,19 @@ enum lx_func {
*/
enum bshfl_func {
wsbh_op = 0x2,
- dshd_op = 0x5,
seb_op = 0x10,
seh_op = 0x18,
};
/*
+ * DBSHFL opcodes
+ */
+enum dbshfl_func {
+ dsbh_op = 0x2,
+ dshd_op = 0x5,
+};
+
+/*
* MSA minor opcodes.
*/
enum msa_func {
--
2.9.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 3/5] MIPS: Add some instructions to uasm.
2017-06-13 22:28 ` David Daney
` (3 preceding siblings ...)
(?)
@ 2017-06-13 22:28 ` David Daney
-1 siblings, 0 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
Follow on patches for eBPF JIT require these additional instructions:
insn_bgtz, insn_blez, insn_break, insn_ddivu, insn_dmultu,
insn_dsbh, insn_dshd, insn_dsllv, insn_dsra32, insn_dsrav,
insn_dsrlv, insn_lbu, insn_movn, insn_movz, insn_multu, insn_nor,
insn_sb, insn_sh, insn_slti, insn_dinsu, insn_lwu
... so, add them.
Sort the insn_* enumeration values alphabetically.
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/mips/include/asm/uasm.h | 30 +++++++++++++++++++++++
arch/mips/mm/uasm-mips.c | 21 ++++++++++++++++
arch/mips/mm/uasm.c | 58 ++++++++++++++++++++++++++++++++++----------
3 files changed, 96 insertions(+), 13 deletions(-)
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 3748f4d..59dae37 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -72,9 +72,12 @@ Ip_u1u2s3(_beq);
Ip_u1u2s3(_beql);
Ip_u1s2(_bgez);
Ip_u1s2(_bgezl);
+Ip_u1s2(_bgtz);
+Ip_u1s2(_blez);
Ip_u1s2(_bltz);
Ip_u1s2(_bltzl);
Ip_u1u2s3(_bne);
+Ip_u1(_break);
Ip_u2s3u1(_cache);
Ip_u1u2(_cfc1);
Ip_u2u1(_cfcmsa);
@@ -82,19 +85,28 @@ Ip_u1u2(_ctc1);
Ip_u2u1(_ctcmsa);
Ip_u2u1s3(_daddiu);
Ip_u3u1u2(_daddu);
+Ip_u1u2(_ddivu);
Ip_u1(_di);
Ip_u2u1msbu3(_dins);
Ip_u2u1msbu3(_dinsm);
+Ip_u2u1msbu3(_dinsu);
Ip_u1u2(_divu);
Ip_u1u2u3(_dmfc0);
Ip_u1u2u3(_dmtc0);
+Ip_u1u2(_dmultu);
Ip_u2u1u3(_drotr);
Ip_u2u1u3(_drotr32);
+Ip_u2u1(_dsbh);
+Ip_u2u1(_dshd);
Ip_u2u1u3(_dsll);
Ip_u2u1u3(_dsll32);
+Ip_u3u2u1(_dsllv);
Ip_u2u1u3(_dsra);
+Ip_u2u1u3(_dsra32);
+Ip_u3u2u1(_dsrav);
Ip_u2u1u3(_dsrl);
Ip_u2u1u3(_dsrl32);
+Ip_u3u2u1(_dsrlv);
Ip_u3u1u2(_dsubu);
Ip_0(_eret);
Ip_u2u1msbu3(_ext);
@@ -104,6 +116,7 @@ Ip_u1(_jal);
Ip_u2u1(_jalr);
Ip_u1(_jr);
Ip_u2s3u1(_lb);
+Ip_u2s3u1(_lbu);
Ip_u2s3u1(_ld);
Ip_u3u1u2(_ldx);
Ip_u2s3u1(_lh);
@@ -112,27 +125,35 @@ Ip_u2s3u1(_ll);
Ip_u2s3u1(_lld);
Ip_u1s2(_lui);
Ip_u2s3u1(_lw);
+Ip_u2s3u1(_lwu);
Ip_u3u1u2(_lwx);
Ip_u1u2u3(_mfc0);
Ip_u1u2u3(_mfhc0);
Ip_u1(_mfhi);
Ip_u1(_mflo);
+Ip_u3u1u2(_movn);
+Ip_u3u1u2(_movz);
Ip_u1u2u3(_mtc0);
Ip_u1u2u3(_mthc0);
Ip_u1(_mthi);
Ip_u1(_mtlo);
Ip_u3u1u2(_mul);
+Ip_u1u2(_multu);
+Ip_u3u1u2(_nor);
Ip_u3u1u2(_or);
Ip_u2u1u3(_ori);
Ip_u2s3u1(_pref);
Ip_0(_rfe);
Ip_u2u1u3(_rotr);
+Ip_u2s3u1(_sb);
Ip_u2s3u1(_sc);
Ip_u2s3u1(_scd);
Ip_u2s3u1(_sd);
+Ip_u2s3u1(_sh);
Ip_u2u1u3(_sll);
Ip_u3u2u1(_sllv);
Ip_s3s1s2(_slt);
+Ip_u2u1s3(_slti);
Ip_u2u1s3(_sltiu);
Ip_u3u1u2(_sltu);
Ip_u2u1u3(_sra);
@@ -248,6 +269,15 @@ static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
uasm_i_dsrl32(p, a1, a2, a3 - 32);
}
+static inline void uasm_i_dsra_safe(u32 **p, unsigned int a1,
+ unsigned int a2, unsigned int a3)
+{
+ if (a3 < 32)
+ uasm_i_dsra(p, a1, a2, a3);
+ else
+ uasm_i_dsra32(p, a1, a2, a3 - 32);
+}
+
/* Handle relocations. */
struct uasm_reloc {
u32 *addr;
diff --git a/arch/mips/mm/uasm-mips.c b/arch/mips/mm/uasm-mips.c
index f3937e3..3f74f6c 100644
--- a/arch/mips/mm/uasm-mips.c
+++ b/arch/mips/mm/uasm-mips.c
@@ -59,9 +59,12 @@ static const struct insn const insn_table[insn_invalid] = {
[insn_beql] = {M(beql_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
[insn_bgez] = {M(bcond_op, 0, bgez_op, 0, 0, 0), RS | BIMM},
[insn_bgezl] = {M(bcond_op, 0, bgezl_op, 0, 0, 0), RS | BIMM},
+ [insn_bgtz] = {M(bgtz_op, 0, 0, 0, 0, 0), RS | BIMM},
+ [insn_blez] = {M(blez_op, 0, 0, 0, 0, 0), RS | BIMM},
[insn_bltz] = {M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM},
[insn_bltzl] = {M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM},
[insn_bne] = {M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM},
+ [insn_break] = {M(spec_op, 0, 0, 0, 0, break_op), SCIMM},
#ifndef CONFIG_CPU_MIPSR6
[insn_cache] = {M(cache_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#else
@@ -73,19 +76,28 @@ static const struct insn const insn_table[insn_invalid] = {
[insn_ctcmsa] = {M(msa_op, 0, msa_ctc_op, 0, 0, msa_elm_op), RD | RE},
[insn_daddiu] = {M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_daddu] = {M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD},
+ [insn_ddivu] = {M(spec_op, 0, 0, 0, 0, ddivu_op), RS | RT},
[insn_di] = {M(cop0_op, mfmc0_op, 0, 12, 0, 0), RT},
[insn_dins] = {M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE},
[insn_dinsm] = {M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE},
+ [insn_dinsu] = {M(spec3_op, 0, 0, 0, 0, dinsu_op), RS | RT | RD | RE},
[insn_divu] = {M(spec_op, 0, 0, 0, 0, divu_op), RS | RT},
[insn_dmfc0] = {M(cop0_op, dmfc_op, 0, 0, 0, 0), RT | RD | SET},
[insn_dmtc0] = {M(cop0_op, dmtc_op, 0, 0, 0, 0), RT | RD | SET},
+ [insn_dmultu] = {M(spec_op, 0, 0, 0, 0, dmultu_op), RS | RT},
[insn_drotr] = {M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE},
[insn_drotr32] = {M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE},
+ [insn_dsbh] = {M(spec3_op, 0, 0, 0, dsbh_op, dbshfl_op), RT | RD},
+ [insn_dshd] = {M(spec3_op, 0, 0, 0, dshd_op, dbshfl_op), RT | RD},
[insn_dsll] = {M(spec_op, 0, 0, 0, 0, dsll_op), RT | RD | RE},
[insn_dsll32] = {M(spec_op, 0, 0, 0, 0, dsll32_op), RT | RD | RE},
+ [insn_dsllv] = {M(spec_op, 0, 0, 0, 0, dsllv_op), RS | RT | RD},
[insn_dsra] = {M(spec_op, 0, 0, 0, 0, dsra_op), RT | RD | RE},
+ [insn_dsra32] = {M(spec_op, 0, 0, 0, 0, dsra32_op), RT | RD | RE},
+ [insn_dsrav] = {M(spec_op, 0, 0, 0, 0, dsrav_op), RS | RT | RD},
[insn_dsrl] = {M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE},
[insn_dsrl32] = {M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE},
+ [insn_dsrlv] = {M(spec_op, 0, 0, 0, 0, dsrlv_op), RS | RT | RD},
[insn_dsubu] = {M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD},
[insn_eret] = {M(cop0_op, cop_op, 0, 0, 0, eret_op), 0},
[insn_ext] = {M(spec3_op, 0, 0, 0, 0, ext_op), RS | RT | RD | RE},
@@ -99,6 +111,7 @@ static const struct insn const insn_table[insn_invalid] = {
[insn_jr] = {M(spec_op, 0, 0, 0, 0, jalr_op), RS},
#endif
[insn_lb] = {M(lb_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lbu] = {M(lbu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_ld] = {M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_lddir] = {M(lwc2_op, 0, 0, 0, lddir_op, mult_op), RS | RT | RD},
[insn_ldpte] = {M(lwc2_op, 0, 0, 0, ldpte_op, mult_op), RS | RD},
@@ -114,11 +127,14 @@ static const struct insn const insn_table[insn_invalid] = {
#endif
[insn_lui] = {M(lui_op, 0, 0, 0, 0, 0), RT | SIMM},
[insn_lw] = {M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_lwu] = {M(lwu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_lwx] = {M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD},
[insn_mfc0] = {M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
[insn_mfhc0] = {M(cop0_op, mfhc0_op, 0, 0, 0, 0), RT | RD | SET},
[insn_mfhi] = {M(spec_op, 0, 0, 0, 0, mfhi_op), RD},
[insn_mflo] = {M(spec_op, 0, 0, 0, 0, mflo_op), RD},
+ [insn_movn] = {M(spec_op, 0, 0, 0, 0, movn_op), RS | RT | RD},
+ [insn_movz] = {M(spec_op, 0, 0, 0, 0, movz_op), RS | RT | RD},
[insn_mtc0] = {M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
[insn_mthc0] = {M(cop0_op, mthc0_op, 0, 0, 0, 0), RT | RD | SET},
[insn_mthi] = {M(spec_op, 0, 0, 0, 0, mthi_op), RS},
@@ -128,6 +144,8 @@ static const struct insn const insn_table[insn_invalid] = {
#else
[insn_mul] = {M(spec_op, 0, 0, 0, mult_mul_op, mult_op), RS | RT | RD},
#endif
+ [insn_multu] = {M(spec_op, 0, 0, 0, 0, multu_op), RS | RT},
+ [insn_nor] = {M(spec_op, 0, 0, 0, 0, nor_op), RS | RT | RD},
[insn_or] = {M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD},
[insn_ori] = {M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM},
#ifndef CONFIG_CPU_MIPSR6
@@ -137,6 +155,7 @@ static const struct insn const insn_table[insn_invalid] = {
#endif
[insn_rfe] = {M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0},
[insn_rotr] = {M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE},
+ [insn_sb] = {M(sb_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
#ifndef CONFIG_CPU_MIPSR6
[insn_sc] = {M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_scd] = {M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
@@ -145,9 +164,11 @@ static const struct insn const insn_table[insn_invalid] = {
[insn_scd] = {M6(spec3_op, 0, 0, 0, scd6_op), RS | RT | SIMM9},
#endif
[insn_sd] = {M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
+ [insn_sh] = {M(sh_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_sll] = {M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE},
[insn_sllv] = {M(spec_op, 0, 0, 0, 0, sllv_op), RS | RT | RD},
[insn_slt] = {M(spec_op, 0, 0, 0, 0, slt_op), RS | RT | RD},
+ [insn_slti] = {M(slti_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_sltiu] = {M(sltiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM},
[insn_sltu] = {M(spec_op, 0, 0, 0, 0, sltu_op), RS | RT | RD},
[insn_sra] = {M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE},
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index f23ed85..57570c0 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -47,20 +47,24 @@ enum fields {
enum opcode {
insn_addiu, insn_addu, insn_and, insn_andi, insn_bbit0, insn_bbit1,
- insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
- insn_bne, insn_cache, insn_cfc1, insn_cfcmsa, insn_ctc1, insn_ctcmsa,
- insn_daddiu, insn_daddu, insn_di, insn_dins, insn_dinsm, insn_divu,
- insn_dmfc0, insn_dmtc0, insn_drotr, insn_drotr32, insn_dsll,
- insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32, insn_dsubu, insn_eret,
- insn_ext, insn_ins, insn_j, insn_jal, insn_jalr, insn_jr, insn_lb,
- insn_ld, insn_ldx, insn_lh, insn_ll, insn_lld, insn_lui, insn_lw,
- insn_lwx, insn_mfc0, insn_mfhc0, insn_mfhi, insn_mflo, insn_mtc0,
- insn_mthc0, insn_mthi, insn_mtlo, insn_mul, insn_or, insn_ori,
- insn_pref, insn_rfe, insn_rotr, insn_sc, insn_scd, insn_sd, insn_sll,
- insn_sllv, insn_slt, insn_sltiu, insn_sltu, insn_sra, insn_srl,
+ insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bgtz, insn_blez,
+ insn_bltz, insn_bltzl, insn_bne, insn_break, insn_cache, insn_cfc1,
+ insn_cfcmsa, insn_ctc1, insn_ctcmsa, insn_daddiu, insn_daddu, insn_ddivu,
+ insn_di, insn_dins, insn_dinsm, insn_dinsu, insn_divu, insn_dmfc0,
+ insn_dmtc0, insn_dmultu, insn_drotr, insn_drotr32, insn_dsbh, insn_dshd,
+ insn_dsll, insn_dsll32, insn_dsllv, insn_dsra, insn_dsra32, insn_dsrav,
+ insn_dsrl, insn_dsrl32, insn_dsrlv, insn_dsubu, insn_eret, insn_ext,
+ insn_ins, insn_j, insn_jal, insn_jalr, insn_jr, insn_lb, insn_lbu,
+ insn_ld, insn_lddir, insn_ldpte, insn_ldx, insn_lh, insn_lhu,
+ insn_ll, insn_lld, insn_lui, insn_lw, insn_lwu, insn_lwx, insn_mfc0,
+ insn_mfhc0, insn_mfhi, insn_mflo, insn_movn, insn_movz, insn_mtc0,
+ insn_mthc0, insn_mthi, insn_mtlo, insn_mul, insn_multu, insn_nor,
+ insn_or, insn_ori, insn_pref, insn_rfe, insn_rotr, insn_sb,
+ insn_sc, insn_scd, insn_sd, insn_sh, insn_sll, insn_sllv,
+ insn_slt, insn_slti, insn_sltiu, insn_sltu, insn_sra, insn_srl,
insn_srlv, insn_subu, insn_sw, insn_sync, insn_syscall, insn_tlbp,
insn_tlbr, insn_tlbwi, insn_tlbwr, insn_wait, insn_wsbh, insn_xor,
- insn_xori, insn_yield, insn_lddir, insn_ldpte, insn_lhu,
+ insn_xori, insn_yield,
insn_invalid /* insn_invalid must be last */
};
@@ -214,6 +218,13 @@ Ip_u2u1msbu3(op) \
} \
UASM_EXPORT_SYMBOL(uasm_i##op);
+#define I_u2u1msb32msb3(op) \
+Ip_u2u1msbu3(op) \
+{ \
+ build_insn(buf, insn##op, b, a, c+d-33, c-32); \
+} \
+UASM_EXPORT_SYMBOL(uasm_i##op);
+
#define I_u2u1msbdu3(op) \
Ip_u2u1msbu3(op) \
{ \
@@ -264,25 +275,36 @@ I_u1u2s3(_beq)
I_u1u2s3(_beql)
I_u1s2(_bgez)
I_u1s2(_bgezl)
+I_u1s2(_bgtz)
+I_u1s2(_blez)
I_u1s2(_bltz)
I_u1s2(_bltzl)
I_u1u2s3(_bne)
+I_u1(_break)
I_u2s3u1(_cache)
I_u1u2(_cfc1)
I_u2u1(_cfcmsa)
I_u1u2(_ctc1)
I_u2u1(_ctcmsa)
+I_u1u2(_ddivu)
I_u1u2u3(_dmfc0)
I_u1u2u3(_dmtc0)
+I_u1u2(_dmultu)
I_u2u1s3(_daddiu)
I_u3u1u2(_daddu)
I_u1(_di);
I_u1u2(_divu)
+I_u2u1(_dsbh);
+I_u2u1(_dshd);
I_u2u1u3(_dsll)
I_u2u1u3(_dsll32)
+I_u3u2u1(_dsllv)
I_u2u1u3(_dsra)
+I_u2u1u3(_dsra32)
+I_u3u2u1(_dsrav)
I_u2u1u3(_dsrl)
I_u2u1u3(_dsrl32)
+I_u3u2u1(_dsrlv)
I_u2u1u3(_drotr)
I_u2u1u3(_drotr32)
I_u3u1u2(_dsubu)
@@ -294,6 +316,7 @@ I_u1(_jal)
I_u2u1(_jalr)
I_u1(_jr)
I_u2s3u1(_lb)
+I_u2s3u1(_lbu)
I_u2s3u1(_ld)
I_u2s3u1(_lh)
I_u2s3u1(_lhu)
@@ -301,8 +324,11 @@ I_u2s3u1(_ll)
I_u2s3u1(_lld)
I_u1s2(_lui)
I_u2s3u1(_lw)
+I_u2s3u1(_lwu)
I_u1u2u3(_mfc0)
I_u1u2u3(_mfhc0)
+I_u3u1u2(_movn)
+I_u3u1u2(_movz)
I_u1(_mfhi)
I_u1(_mflo)
I_u1u2u3(_mtc0)
@@ -310,15 +336,20 @@ I_u1u2u3(_mthc0)
I_u1(_mthi)
I_u1(_mtlo)
I_u3u1u2(_mul)
-I_u2u1u3(_ori)
+I_u1u2(_multu)
+I_u3u1u2(_nor)
I_u3u1u2(_or)
+I_u2u1u3(_ori)
I_0(_rfe)
+I_u2s3u1(_sb)
I_u2s3u1(_sc)
I_u2s3u1(_scd)
I_u2s3u1(_sd)
+I_u2s3u1(_sh)
I_u2u1u3(_sll)
I_u3u2u1(_sllv)
I_s3s1s2(_slt)
+I_u2u1s3(_slti)
I_u2u1s3(_sltiu)
I_u3u1u2(_sltu)
I_u2u1u3(_sra)
@@ -339,6 +370,7 @@ I_u2u1u3(_xori)
I_u2u1(_yield)
I_u2u1msbu3(_dins);
I_u2u1msb32u3(_dinsm);
+I_u2u1msb32msb3(_dinsu);
I_u1(_syscall);
I_u1u2s3(_bbit0);
I_u1u2s3(_bbit1);
--
2.9.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 4/5] MIPS: Add support for eBPF JIT.
2017-06-13 22:28 ` David Daney
` (4 preceding siblings ...)
(?)
@ 2017-06-13 22:28 ` David Daney
2017-06-14 0:04 ` Daniel Borkmann
2017-06-15 16:37 ` James Cowgill
-1 siblings, 2 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
Since the eBPF machine has 64-bit registers, we only support this in
64-bit kernels. As of the writing of this commit log test-bpf is showing:
test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]
All current test cases are successfully compiled.
Many examples in samples/bpf are usable, specifically tracex5 which
uses tail calls works.
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/mips/Kconfig | 12 +-
arch/mips/net/Makefile | 3 +-
arch/mips/net/ebpf_jit.c | 1949 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1962 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/net/ebpf_jit.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2828ecd..f4cf11e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -18,7 +18,8 @@ config MIPS
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
- select HAVE_CBPF_JIT if !CPU_MICROMIPS
+ select HAVE_CBPF_JIT if (!64BIT && !CPU_MICROMIPS)
+ select HAVE_EBPF_JIT if (64BIT && !CPU_MICROMIPS)
select HAVE_FUNCTION_TRACER
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
@@ -1178,6 +1179,15 @@ config SYS_SUPPORTS_RELOCATABLE
The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
to allow access to command line and entropy sources.
+config MIPS_CBPF_JIT
+ def_bool y
+ depends on BPF_JIT && HAVE_CBPF_JIT
+
+config MIPS_EBPF_JIT
+ def_bool y
+ depends on BPF_JIT && HAVE_EBPF_JIT
+
+
#
# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
diff --git a/arch/mips/net/Makefile b/arch/mips/net/Makefile
index 8c27714..47d6784 100644
--- a/arch/mips/net/Makefile
+++ b/arch/mips/net/Makefile
@@ -1,3 +1,4 @@
# MIPS networking code
-obj-$(CONFIG_BPF_JIT) += bpf_jit.o bpf_jit_asm.o
+obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
+obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
diff --git a/arch/mips/net/ebpf_jit.c b/arch/mips/net/ebpf_jit.c
new file mode 100644
index 0000000..19af13f
--- /dev/null
+++ b/arch/mips/net/ebpf_jit.c
@@ -0,0 +1,1949 @@
+/*
+ * Just-In-Time compiler for eBPF filters on MIPS
+ *
+ * Copyright (c) 2017 Cavium, Inc.
+ *
+ * Based on code from:
+ *
+ * Copyright (c) 2014 Imagination Technologies Ltd.
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/filter.h>
+#include <linux/bpf.h>
+#include <linux/slab.h>
+#include <asm/bitops.h>
+#include <asm/byteorder.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu-features.h>
+#include <asm/uasm.h>
+
+/* Registers used by JIT */
+#define MIPS_R_ZERO 0
+#define MIPS_R_AT 1
+#define MIPS_R_V0 2 /* BPF_R0 */
+#define MIPS_R_V1 3
+#define MIPS_R_A0 4 /* BPF_R1 */
+#define MIPS_R_A1 5 /* BPF_R2 */
+#define MIPS_R_A2 6 /* BPF_R3 */
+#define MIPS_R_A3 7 /* BPF_R4 */
+#define MIPS_R_A4 8 /* BPF_R5 */
+#define MIPS_R_T4 12 /* BPF_AX */
+#define MIPS_R_T5 13
+#define MIPS_R_T6 14
+#define MIPS_R_T7 15
+#define MIPS_R_S0 16 /* BPF_R6 */
+#define MIPS_R_S1 17 /* BPF_R7 */
+#define MIPS_R_S2 18 /* BPF_R8 */
+#define MIPS_R_S3 19 /* BPF_R9 */
+#define MIPS_R_S4 20 /* BPF_TCC */
+#define MIPS_R_S5 21
+#define MIPS_R_S6 22
+#define MIPS_R_S7 23
+#define MIPS_R_T8 24
+#define MIPS_R_T9 25
+#define MIPS_R_SP 29
+#define MIPS_R_RA 31
+
+/* eBPF flags */
+#define EBPF_SAVE_S0 BIT(0)
+#define EBPF_SAVE_S1 BIT(1)
+#define EBPF_SAVE_S2 BIT(2)
+#define EBPF_SAVE_S3 BIT(3)
+#define EBPF_SAVE_S4 BIT(4)
+#define EBPF_SAVE_RA BIT(5)
+#define EBPF_SEEN_FP BIT(6)
+#define EBPF_SEEN_TC BIT(7)
+#define EBPF_TCC_IN_V1 BIT(8)
+
+/*
+ * For the mips64 ISA, we need to track the value range or type for
+ * each JIT register. The BPF machine requires zero extended 32-bit
+ * values, but the mips64 ISA requires sign extended 32-bit values.
+ * At each point in the BPF program we track the state of every
+ * register so that we can zero extend or sign extend as the BPF
+ * semantics require.
+ */
+enum reg_val_type {
+ /* uninitialized */
+ REG_UNKNOWN,
+ /* not known to be 32-bit compatible. */
+ REG_64BIT,
+ /* 32-bit compatible, no truncation needed for 64-bit ops. */
+ REG_64BIT_32BIT,
+ /* 32-bit compatible, need truncation for 64-bit ops. */
+ REG_32BIT,
+ /* 32-bit zero extended. */
+ REG_32BIT_ZERO_EX,
+ /* 32-bit no sign/zero extension needed. */
+ REG_32BIT_POS
+};
+
+/*
+ * high bit of offsets indicates if long branch conversion done at
+ * this insn.
+ */
+#define OFFSETS_B_CONV BIT(31)
+
+/**
+ * struct jit_ctx - JIT context
+ * @skf: The sk_filter
+ * @stack_size: eBPF stack size
+ * @tmp_offset: eBPF $sp offset to 8-byte temporary memory
+ * @idx: Instruction index
+ * @flags: JIT flags
+ * @offsets: Instruction offsets
+ * @target: Memory location for the compiled filter
+ * @reg_val_types Packed enum reg_val_type for each register.
+ */
+struct jit_ctx {
+ const struct bpf_prog *skf;
+ int stack_size;
+ int tmp_offset;
+ u32 idx;
+ u32 flags;
+ u32 *offsets;
+ u32 *target;
+ u64 *reg_val_types;
+ unsigned int long_b_conversion:1;
+ unsigned int gen_b_offsets:1;
+};
+
+static void set_reg_val_type(u64 *rvt, int reg, enum reg_val_type type)
+{
+ *rvt &= ~(7ull << (reg * 3));
+ *rvt |= ((u64)type << (reg * 3));
+}
+
+static enum reg_val_type get_reg_val_type(const struct jit_ctx *ctx,
+ int index, int reg)
+{
+ return (ctx->reg_val_types[index] >> (reg * 3)) & 7;
+}
+
+/* Simply emit the instruction if the JIT memory space has been allocated */
+#define emit_instr(ctx, func, ...) \
+do { \
+ if ((ctx)->target != NULL) { \
+ u32 *p = &(ctx)->target[ctx->idx]; \
+ uasm_i_##func(&p, ##__VA_ARGS__); \
+ } \
+ (ctx)->idx++; \
+} while (0)
+
+static unsigned int j_target(struct jit_ctx *ctx, int target_idx)
+{
+ unsigned long target_va, base_va;
+ unsigned int r;
+
+ if (!ctx->target)
+ return 0;
+
+ base_va = (unsigned long)ctx->target;
+ target_va = base_va + (ctx->offsets[target_idx] & ~OFFSETS_B_CONV);
+
+ if ((base_va & ~0x0ffffffful) != (target_va & ~0x0ffffffful))
+ return (unsigned int)-1;
+ r = target_va & 0x0ffffffful;
+ return r;
+}
+
+/* Compute the immediate value for PC-relative branches. */
+static u32 b_imm(unsigned int tgt, struct jit_ctx *ctx)
+{
+ if (!ctx->gen_b_offsets)
+ return 0;
+
+ /*
+ * We want a pc-relative branch. tgt is the instruction offset
+ * we want to jump to.
+
+ * Branch on MIPS:
+ * I: target_offset <- sign_extend(offset)
+ * I+1: PC += target_offset (delay slot)
+ *
+ * ctx->idx currently points to the branch instruction
+ * but the offset is added to the delay slot so we need
+ * to subtract 4.
+ */
+ return (ctx->offsets[tgt] & ~OFFSETS_B_CONV) -
+ (ctx->idx * 4) - 4;
+}
+
+int bpf_jit_enable __read_mostly;
+
+enum which_ebpf_reg {
+ src_reg,
+ src_reg_no_fp,
+ dst_reg,
+ dst_reg_fp_ok
+};
+
+/*
+ * For eBPF, the register mapping naturally falls out of the
+ * requirements of eBPF and the MIPS n64 ABI. We don't maintain a
+ * separate frame pointer, so BPF_REG_10 relative accesses are
+ * adjusted to be $sp relative.
+ */
+int ebpf_to_mips_reg(struct jit_ctx *ctx, const struct bpf_insn *insn,
+ enum which_ebpf_reg w)
+{
+ int ebpf_reg = (w == src_reg || w == src_reg_no_fp) ?
+ insn->src_reg : insn->dst_reg;
+
+ switch (ebpf_reg) {
+ case BPF_REG_0:
+ return MIPS_R_V0;
+ case BPF_REG_1:
+ return MIPS_R_A0;
+ case BPF_REG_2:
+ return MIPS_R_A1;
+ case BPF_REG_3:
+ return MIPS_R_A2;
+ case BPF_REG_4:
+ return MIPS_R_A3;
+ case BPF_REG_5:
+ return MIPS_R_A4;
+ case BPF_REG_6:
+ ctx->flags |= EBPF_SAVE_S0;
+ return MIPS_R_S0;
+ case BPF_REG_7:
+ ctx->flags |= EBPF_SAVE_S1;
+ return MIPS_R_S1;
+ case BPF_REG_8:
+ ctx->flags |= EBPF_SAVE_S2;
+ return MIPS_R_S2;
+ case BPF_REG_9:
+ ctx->flags |= EBPF_SAVE_S3;
+ return MIPS_R_S3;
+ case BPF_REG_10:
+ if (w == dst_reg || w == src_reg_no_fp)
+ goto bad_reg;
+ ctx->flags |= EBPF_SEEN_FP;
+ /*
+ * Needs special handling, return something that
+ * cannot be clobbered just in case.
+ */
+ return MIPS_R_ZERO;
+ case BPF_REG_AX:
+ return MIPS_R_T4;
+ default:
+bad_reg:
+ WARN(1, "Illegal bpf reg: %d\n", ebpf_reg);
+ return -EINVAL;
+ }
+}
+/*
+ * eBPF stack frame will be something like:
+ *
+ * Entry $sp ------> +--------------------------------+
+ * | $ra (optional) |
+ * +--------------------------------+
+ * | $s0 (optional) |
+ * +--------------------------------+
+ * | $s1 (optional) |
+ * +--------------------------------+
+ * | $s2 (optional) |
+ * +--------------------------------+
+ * | $s3 (optional) |
+ * +--------------------------------+
+ * | $s4 (optional) |
+ * +--------------------------------+
+ * | tmp-storage (if $ra saved) |
+ * $sp + tmp_offset --> +--------------------------------+ <--BPF_REG_10
+ * | BPF_REG_10 relative storage |
+ * | MAX_BPF_STACK (optional) |
+ * | . |
+ * | . |
+ * | . |
+ * $sp --------> +--------------------------------+
+ *
+ * If BPF_REG_10 is never referenced, then the MAX_BPF_STACK sized
+ * area is not allocated.
+ */
+static int gen_int_prologue(struct jit_ctx *ctx)
+{
+ int stack_adjust = 0;
+ int store_offset;
+ int locals_size;
+
+ if (ctx->flags & EBPF_SAVE_RA)
+ /*
+ * If RA we are doing a function call and may need
+ * extra 8-byte tmp area.
+ */
+ stack_adjust += 16;
+ if (ctx->flags & EBPF_SAVE_S0)
+ stack_adjust += 8;
+ if (ctx->flags & EBPF_SAVE_S1)
+ stack_adjust += 8;
+ if (ctx->flags & EBPF_SAVE_S2)
+ stack_adjust += 8;
+ if (ctx->flags & EBPF_SAVE_S3)
+ stack_adjust += 8;
+ if (ctx->flags & EBPF_SAVE_S4)
+ stack_adjust += 8;
+
+ BUILD_BUG_ON(MAX_BPF_STACK & 7);
+ locals_size = (ctx->flags & EBPF_SEEN_FP) ? MAX_BPF_STACK : 0;
+
+ stack_adjust += locals_size;
+ ctx->tmp_offset = locals_size;
+
+ ctx->stack_size = stack_adjust;
+
+ /*
+ * First instruction initializes the tail call count (TCC).
+ * On tail call we skip this instruction, and the TCC is
+ * passed in $v1 from the caller.
+ */
+ emit_instr(ctx, daddiu, MIPS_R_V1, MIPS_R_ZERO, MAX_TAIL_CALL_CNT);
+ if (stack_adjust)
+ emit_instr(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, -stack_adjust);
+ else
+ return 0;
+
+ store_offset = stack_adjust - 8;
+
+ if (ctx->flags & EBPF_SAVE_RA) {
+ emit_instr(ctx, sd, MIPS_R_RA, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S0) {
+ emit_instr(ctx, sd, MIPS_R_S0, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S1) {
+ emit_instr(ctx, sd, MIPS_R_S1, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S2) {
+ emit_instr(ctx, sd, MIPS_R_S2, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S3) {
+ emit_instr(ctx, sd, MIPS_R_S3, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S4) {
+ emit_instr(ctx, sd, MIPS_R_S4, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+
+ if ((ctx->flags & EBPF_SEEN_TC) && !(ctx->flags & EBPF_TCC_IN_V1))
+ emit_instr(ctx, daddu, MIPS_R_S4, MIPS_R_V1, MIPS_R_ZERO);
+
+ return 0;
+}
+
+static int build_int_epilogue(struct jit_ctx *ctx, int dest_reg)
+{
+ const struct bpf_prog *prog = ctx->skf;
+ int stack_adjust = ctx->stack_size;
+ int store_offset = stack_adjust - 8;
+ int r0 = MIPS_R_V0;
+
+ if (dest_reg == MIPS_R_RA &&
+ get_reg_val_type(ctx, prog->len, BPF_REG_0) == REG_32BIT_ZERO_EX)
+ /* Don't let zero extended value escape. */
+ emit_instr(ctx, sll, r0, r0, 0);
+
+ if (ctx->flags & EBPF_SAVE_RA) {
+ emit_instr(ctx, ld, MIPS_R_RA, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S0) {
+ emit_instr(ctx, ld, MIPS_R_S0, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S1) {
+ emit_instr(ctx, ld, MIPS_R_S1, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S2) {
+ emit_instr(ctx, ld, MIPS_R_S2, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S3) {
+ emit_instr(ctx, ld, MIPS_R_S3, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ if (ctx->flags & EBPF_SAVE_S4) {
+ emit_instr(ctx, ld, MIPS_R_S4, store_offset, MIPS_R_SP);
+ store_offset -= 8;
+ }
+ emit_instr(ctx, jr, dest_reg);
+
+ if (stack_adjust)
+ emit_instr(ctx, daddiu, MIPS_R_SP, MIPS_R_SP, stack_adjust);
+ else
+ emit_instr(ctx, nop);
+
+ return 0;
+}
+
+static void gen_imm_to_reg(const struct bpf_insn *insn, int reg,
+ struct jit_ctx *ctx)
+{
+ if (insn->imm >= S16_MIN && insn->imm <= S16_MAX) {
+ emit_instr(ctx, addiu, reg, MIPS_R_ZERO, insn->imm);
+ } else {
+ int lower = (s16)(insn->imm & 0xffff);
+ int upper = insn->imm - lower;
+
+ emit_instr(ctx, lui, reg, upper >> 16);
+ emit_instr(ctx, addiu, reg, reg, lower);
+ }
+
+}
+
+static int gen_imm_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
+ int idx)
+{
+ int upper_bound, lower_bound;
+ int dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+
+ if (dst < 0)
+ return dst;
+
+ switch (BPF_OP(insn->code)) {
+ case BPF_MOV:
+ case BPF_ADD:
+ upper_bound = S16_MAX;
+ lower_bound = S16_MIN;
+ break;
+ case BPF_SUB:
+ upper_bound = -(int)S16_MIN;
+ lower_bound = -(int)S16_MAX;
+ break;
+ case BPF_AND:
+ case BPF_OR:
+ case BPF_XOR:
+ upper_bound = 0xffff;
+ lower_bound = 0;
+ break;
+ case BPF_RSH:
+ case BPF_LSH:
+ case BPF_ARSH:
+ /* Shift amounts are truncated, no need for bounds */
+ upper_bound = S32_MAX;
+ lower_bound = S32_MIN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /*
+ * Immediate move clobbers the register, so no sign/zero
+ * extension needed.
+ */
+ if (BPF_CLASS(insn->code) == BPF_ALU64 &&
+ BPF_OP(insn->code) != BPF_MOV &&
+ get_reg_val_type(ctx, idx, insn->dst_reg) == REG_32BIT)
+ emit_instr(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
+ /* BPF_ALU | BPF_LSH doesn't need separate sign extension */
+ if (BPF_CLASS(insn->code) == BPF_ALU &&
+ BPF_OP(insn->code) != BPF_LSH &&
+ BPF_OP(insn->code) != BPF_MOV &&
+ get_reg_val_type(ctx, idx, insn->dst_reg) != REG_32BIT)
+ emit_instr(ctx, sll, dst, dst, 0);
+
+ if (insn->imm >= lower_bound && insn->imm <= upper_bound) {
+ /* single insn immediate case */
+ switch (BPF_OP(insn->code) | BPF_CLASS(insn->code)) {
+ case BPF_ALU64 | BPF_MOV:
+ emit_instr(ctx, daddiu, dst, MIPS_R_ZERO, insn->imm);
+ break;
+ case BPF_ALU64 | BPF_AND:
+ case BPF_ALU | BPF_AND:
+ emit_instr(ctx, andi, dst, dst, insn->imm);
+ break;
+ case BPF_ALU64 | BPF_OR:
+ case BPF_ALU | BPF_OR:
+ emit_instr(ctx, ori, dst, dst, insn->imm);
+ break;
+ case BPF_ALU64 | BPF_XOR:
+ case BPF_ALU | BPF_XOR:
+ emit_instr(ctx, xori, dst, dst, insn->imm);
+ break;
+ case BPF_ALU64 | BPF_ADD:
+ emit_instr(ctx, daddiu, dst, dst, insn->imm);
+ break;
+ case BPF_ALU64 | BPF_SUB:
+ emit_instr(ctx, daddiu, dst, dst, -insn->imm);
+ break;
+ case BPF_ALU64 | BPF_RSH:
+ emit_instr(ctx, dsrl_safe, dst, dst, insn->imm & 0x3f);
+ break;
+ case BPF_ALU | BPF_RSH:
+ emit_instr(ctx, srl, dst, dst, insn->imm & 0x1f);
+ break;
+ case BPF_ALU64 | BPF_LSH:
+ emit_instr(ctx, dsll_safe, dst, dst, insn->imm & 0x3f);
+ break;
+ case BPF_ALU | BPF_LSH:
+ emit_instr(ctx, sll, dst, dst, insn->imm & 0x1f);
+ break;
+ case BPF_ALU64 | BPF_ARSH:
+ emit_instr(ctx, dsra_safe, dst, dst, insn->imm & 0x3f);
+ break;
+ case BPF_ALU | BPF_ARSH:
+ emit_instr(ctx, sra, dst, dst, insn->imm & 0x1f);
+ break;
+ case BPF_ALU | BPF_MOV:
+ emit_instr(ctx, addiu, dst, MIPS_R_ZERO, insn->imm);
+ break;
+ case BPF_ALU | BPF_ADD:
+ emit_instr(ctx, addiu, dst, dst, insn->imm);
+ break;
+ case BPF_ALU | BPF_SUB:
+ emit_instr(ctx, addiu, dst, dst, -insn->imm);
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ /* multi insn immediate case */
+ if (BPF_OP(insn->code) == BPF_MOV) {
+ gen_imm_to_reg(insn, dst, ctx);
+ } else {
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ switch (BPF_OP(insn->code) | BPF_CLASS(insn->code)) {
+ case BPF_ALU64 | BPF_AND:
+ case BPF_ALU | BPF_AND:
+ emit_instr(ctx, and, dst, dst, MIPS_R_AT);
+ break;
+ case BPF_ALU64 | BPF_OR:
+ case BPF_ALU | BPF_OR:
+ emit_instr(ctx, or, dst, dst, MIPS_R_AT);
+ break;
+ case BPF_ALU64 | BPF_XOR:
+ case BPF_ALU | BPF_XOR:
+ emit_instr(ctx, xor, dst, dst, MIPS_R_AT);
+ break;
+ case BPF_ALU64 | BPF_ADD:
+ emit_instr(ctx, daddu, dst, dst, MIPS_R_AT);
+ break;
+ case BPF_ALU64 | BPF_SUB:
+ emit_instr(ctx, dsubu, dst, dst, MIPS_R_AT);
+ break;
+ case BPF_ALU | BPF_ADD:
+ emit_instr(ctx, addu, dst, dst, MIPS_R_AT);
+ break;
+ case BPF_ALU | BPF_SUB:
+ emit_instr(ctx, subu, dst, dst, MIPS_R_AT);
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void * __must_check
+ool_skb_header_pointer(const struct sk_buff *skb, int offset,
+ int len, void *buffer)
+{
+ return skb_header_pointer(skb, offset, len, buffer);
+}
+
+static int size_to_len(const struct bpf_insn *insn)
+{
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_B:
+ return 1;
+ case BPF_H:
+ return 2;
+ case BPF_W:
+ return 4;
+ case BPF_DW:
+ return 8;
+ }
+ return 0;
+}
+
+static void emit_const_to_reg(struct jit_ctx *ctx, int dst, u64 value)
+{
+ if (value >= 0xffffffffffff8000ull || value < 0x8000ull) {
+ emit_instr(ctx, daddiu, dst, MIPS_R_ZERO, (int)value);
+ } else if (value >= 0xffffffff80000000ull ||
+ (value < 0x80000000 && value > 0xffff)) {
+ emit_instr(ctx, lui, dst, (s32)(s16)(value >> 16));
+ emit_instr(ctx, ori, dst, dst, (unsigned int)(value & 0xffff));
+ } else {
+ int i;
+ bool seen_part = false;
+ int needed_shift = 0;
+
+ for (i = 0; i < 4; i++) {
+ u64 part = (value >> (16 * (3 - i))) & 0xffff;
+
+ if (seen_part && needed_shift > 0 && (part || i == 3)) {
+ emit_instr(ctx, dsll_safe, dst, dst, needed_shift);
+ needed_shift = 0;
+ }
+ if (part) {
+ if (i == 0 || (!seen_part && i < 3 && part < 0x8000)) {
+ emit_instr(ctx, lui, dst, (s32)(s16)part);
+ needed_shift = -16;
+ } else {
+ emit_instr(ctx, ori, dst,
+ seen_part ? dst : MIPS_R_ZERO,
+ (unsigned int)part);
+ }
+ seen_part = true;
+ }
+ if (seen_part)
+ needed_shift += 16;
+ }
+ }
+}
+
+static int emit_bpf_tail_call(struct jit_ctx *ctx, int this_idx)
+{
+ int off, b_off;
+
+ ctx->flags |= EBPF_SEEN_TC;
+ /*
+ * if (index >= array->map.max_entries)
+ * goto out;
+ */
+ off = offsetof(struct bpf_array, map.max_entries);
+ emit_instr(ctx, lwu, MIPS_R_T5, off, MIPS_R_A1);
+ emit_instr(ctx, sltu, MIPS_R_AT, MIPS_R_T5, MIPS_R_A2);
+ b_off = b_imm(this_idx + 1, ctx);
+ emit_instr(ctx, bne, MIPS_R_AT, MIPS_R_ZERO, b_off);
+ /*
+ * if (--TCC < 0)
+ * goto out;
+ */
+ /* Delay slot */
+ emit_instr(ctx, daddiu, MIPS_R_T5,
+ (ctx->flags & EBPF_TCC_IN_V1) ? MIPS_R_V1 : MIPS_R_S4, -1);
+ b_off = b_imm(this_idx + 1, ctx);
+ emit_instr(ctx, bltz, MIPS_R_T5, b_off);
+ /*
+ * prog = array->ptrs[index];
+ * if (prog == NULL)
+ * goto out;
+ */
+ /* Delay slot */
+ emit_instr(ctx, dsll, MIPS_R_T8, MIPS_R_A2, 3);
+ emit_instr(ctx, daddu, MIPS_R_T8, MIPS_R_T8, MIPS_R_A1);
+ off = offsetof(struct bpf_array, ptrs);
+ emit_instr(ctx, ld, MIPS_R_AT, off, MIPS_R_T8);
+ b_off = b_imm(this_idx + 1, ctx);
+ emit_instr(ctx, beq, MIPS_R_AT, MIPS_R_ZERO, b_off);
+ /* Delay slot */
+ emit_instr(ctx, nop);
+
+ /* goto *(prog->bpf_func + 4); */
+ off = offsetof(struct bpf_prog, bpf_func);
+ emit_instr(ctx, ld, MIPS_R_T9, off, MIPS_R_AT);
+ /* All systems are go... propagate TCC */
+ emit_instr(ctx, daddu, MIPS_R_V1, MIPS_R_T5, MIPS_R_ZERO);
+ /* Skip first instruction (TCC initialization) */
+ emit_instr(ctx, daddiu, MIPS_R_T9, MIPS_R_T9, 4);
+ return build_int_epilogue(ctx, MIPS_R_T9);
+}
+
+static bool use_bbit_insns(void)
+{
+ switch (current_cpu_type()) {
+ case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
+ case CPU_CAVIUM_OCTEON2:
+ case CPU_CAVIUM_OCTEON3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool is_bad_offset(int b_off)
+{
+ return b_off > 0x1ffff || b_off < -0x20000;
+}
+
+/* Returns the number of insn slots consumed. */
+static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
+ int this_idx, int exit_idx)
+{
+ int src, dst, r, td, ts, mem_off, b_off;
+ bool need_swap, did_move, cmp_eq;
+ unsigned int target;
+ u64 t64;
+ s64 t64s;
+
+ switch (insn->code) {
+ case BPF_ALU64 | BPF_ADD | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_SUB | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_OR | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_AND | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_LSH | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_RSH | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_XOR | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_ARSH | BPF_K: /* ALU64_IMM */
+ case BPF_ALU64 | BPF_MOV | BPF_K: /* ALU64_IMM */
+ case BPF_ALU | BPF_MOV | BPF_K: /* ALU32_IMM */
+ case BPF_ALU | BPF_ADD | BPF_K: /* ALU32_IMM */
+ case BPF_ALU | BPF_SUB | BPF_K: /* ALU32_IMM */
+ case BPF_ALU | BPF_OR | BPF_K: /* ALU64_IMM */
+ case BPF_ALU | BPF_AND | BPF_K: /* ALU64_IMM */
+ case BPF_ALU | BPF_LSH | BPF_K: /* ALU64_IMM */
+ case BPF_ALU | BPF_RSH | BPF_K: /* ALU64_IMM */
+ case BPF_ALU | BPF_XOR | BPF_K: /* ALU64_IMM */
+ case BPF_ALU | BPF_ARSH | BPF_K: /* ALU64_IMM */
+ r = gen_imm_insn(insn, ctx, this_idx);
+ if (r < 0)
+ return r;
+ break;
+ case BPF_ALU64 | BPF_MUL | BPF_K: /* ALU64_IMM */
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
+ emit_instr(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
+ if (insn->imm == 1) /* Mult by 1 is a nop */
+ break;
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ emit_instr(ctx, dmultu, MIPS_R_AT, dst);
+ emit_instr(ctx, mflo, dst);
+ break;
+ case BPF_ALU64 | BPF_NEG | BPF_K: /* ALU64_IMM */
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
+ emit_instr(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
+ emit_instr(ctx, dsubu, dst, MIPS_R_ZERO, dst);
+ break;
+ case BPF_ALU | BPF_MUL | BPF_K: /* ALU_IMM */
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
+ if (td == REG_64BIT || td == REG_32BIT_ZERO_EX) {
+ /* sign extend */
+ emit_instr(ctx, sll, dst, dst, 0);
+ }
+ if (insn->imm == 1) /* Mult by 1 is a nop */
+ break;
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ emit_instr(ctx, multu, dst, MIPS_R_AT);
+ emit_instr(ctx, mflo, dst);
+ break;
+ case BPF_ALU | BPF_NEG | BPF_K: /* ALU_IMM */
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
+ if (td == REG_64BIT || td == REG_32BIT_ZERO_EX) {
+ /* sign extend */
+ emit_instr(ctx, sll, dst, dst, 0);
+ }
+ emit_instr(ctx, subu, dst, MIPS_R_ZERO, dst);
+ break;
+ case BPF_ALU | BPF_DIV | BPF_K: /* ALU_IMM */
+ case BPF_ALU | BPF_MOD | BPF_K: /* ALU_IMM */
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ if (insn->imm == 0) { /* Div by zero */
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, beq, MIPS_R_ZERO, MIPS_R_ZERO, b_off);
+ emit_instr(ctx, addu, MIPS_R_V0, MIPS_R_ZERO, MIPS_R_ZERO);
+ }
+ td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
+ if (td == REG_64BIT || td == REG_32BIT_ZERO_EX)
+ /* sign extend */
+ emit_instr(ctx, sll, dst, dst, 0);
+ if (insn->imm == 1) {
+ /* div by 1 is a nop, mod by 1 is zero */
+ if (BPF_OP(insn->code) == BPF_MOD)
+ emit_instr(ctx, addu, dst, MIPS_R_ZERO, MIPS_R_ZERO);
+ break;
+ }
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ emit_instr(ctx, divu, dst, MIPS_R_AT);
+ if (BPF_OP(insn->code) == BPF_DIV)
+ emit_instr(ctx, mflo, dst);
+ else
+ emit_instr(ctx, mfhi, dst);
+ break;
+ case BPF_ALU64 | BPF_DIV | BPF_K: /* ALU_IMM */
+ case BPF_ALU64 | BPF_MOD | BPF_K: /* ALU_IMM */
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ if (insn->imm == 0) { /* Div by zero */
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, beq, MIPS_R_ZERO, MIPS_R_ZERO, b_off);
+ emit_instr(ctx, addu, MIPS_R_V0, MIPS_R_ZERO, MIPS_R_ZERO);
+ }
+ if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
+ emit_instr(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
+
+ if (insn->imm == 1) {
+ /* div by 1 is a nop, mod by 1 is zero */
+ if (BPF_OP(insn->code) == BPF_MOD)
+ emit_instr(ctx, addu, dst, MIPS_R_ZERO, MIPS_R_ZERO);
+ break;
+ }
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ emit_instr(ctx, ddivu, dst, MIPS_R_AT);
+ if (BPF_OP(insn->code) == BPF_DIV)
+ emit_instr(ctx, mflo, dst);
+ else
+ emit_instr(ctx, mfhi, dst);
+ break;
+ case BPF_ALU64 | BPF_MOV | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_ADD | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_SUB | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_XOR | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_OR | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_AND | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_MUL | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_DIV | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_MOD | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_LSH | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_RSH | BPF_X: /* ALU64_REG */
+ case BPF_ALU64 | BPF_ARSH | BPF_X: /* ALU64_REG */
+ src = ebpf_to_mips_reg(ctx, insn, src_reg);
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (src < 0 || dst < 0)
+ return -EINVAL;
+ if (get_reg_val_type(ctx, this_idx, insn->dst_reg) == REG_32BIT)
+ emit_instr(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
+ did_move = false;
+ if (insn->src_reg == BPF_REG_10) {
+ if (BPF_OP(insn->code) == BPF_MOV) {
+ emit_instr(ctx, daddiu, dst, MIPS_R_SP, MAX_BPF_STACK);
+ did_move = true;
+ } else {
+ emit_instr(ctx, daddiu, MIPS_R_AT, MIPS_R_SP, MAX_BPF_STACK);
+ src = MIPS_R_AT;
+ }
+ } else if (get_reg_val_type(ctx, this_idx, insn->src_reg) == REG_32BIT) {
+ int tmp_reg = MIPS_R_AT;
+
+ if (BPF_OP(insn->code) == BPF_MOV) {
+ tmp_reg = dst;
+ did_move = true;
+ }
+ emit_instr(ctx, daddu, tmp_reg, src, MIPS_R_ZERO);
+ emit_instr(ctx, dinsu, tmp_reg, MIPS_R_ZERO, 32, 32);
+ src = MIPS_R_AT;
+ }
+ switch (BPF_OP(insn->code)) {
+ case BPF_MOV:
+ if (!did_move)
+ emit_instr(ctx, daddu, dst, src, MIPS_R_ZERO);
+ break;
+ case BPF_ADD:
+ emit_instr(ctx, daddu, dst, dst, src);
+ break;
+ case BPF_SUB:
+ emit_instr(ctx, dsubu, dst, dst, src);
+ break;
+ case BPF_XOR:
+ emit_instr(ctx, xor, dst, dst, src);
+ break;
+ case BPF_OR:
+ emit_instr(ctx, or, dst, dst, src);
+ break;
+ case BPF_AND:
+ emit_instr(ctx, and, dst, dst, src);
+ break;
+ case BPF_MUL:
+ emit_instr(ctx, dmultu, dst, src);
+ emit_instr(ctx, mflo, dst);
+ break;
+ case BPF_DIV:
+ case BPF_MOD:
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, beq, src, MIPS_R_ZERO, b_off);
+ emit_instr(ctx, movz, MIPS_R_V0, MIPS_R_ZERO, src);
+ emit_instr(ctx, ddivu, dst, src);
+ if (BPF_OP(insn->code) == BPF_DIV)
+ emit_instr(ctx, mflo, dst);
+ else
+ emit_instr(ctx, mfhi, dst);
+ break;
+ case BPF_LSH:
+ emit_instr(ctx, dsllv, dst, dst, src);
+ break;
+ case BPF_RSH:
+ emit_instr(ctx, dsrlv, dst, dst, src);
+ break;
+ case BPF_ARSH:
+ emit_instr(ctx, dsrav, dst, dst, src);
+ break;
+ default:
+ pr_err("ALU64_REG NOT HANDLED\n");
+ return -EINVAL;
+ }
+ break;
+ case BPF_ALU | BPF_MOV | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_ADD | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_SUB | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_XOR | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_OR | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_AND | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_MUL | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_DIV | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_MOD | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_LSH | BPF_X: /* ALU_REG */
+ case BPF_ALU | BPF_RSH | BPF_X: /* ALU_REG */
+ src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (src < 0 || dst < 0)
+ return -EINVAL;
+ td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
+ if (td == REG_64BIT || td == REG_32BIT_ZERO_EX) {
+ /* sign extend */
+ emit_instr(ctx, sll, dst, dst, 0);
+ }
+ did_move = false;
+ ts = get_reg_val_type(ctx, this_idx, insn->src_reg);
+ if (ts == REG_64BIT || ts == REG_32BIT_ZERO_EX) {
+ int tmp_reg = MIPS_R_AT;
+
+ if (BPF_OP(insn->code) == BPF_MOV) {
+ tmp_reg = dst;
+ did_move = true;
+ }
+ /* sign extend */
+ emit_instr(ctx, sll, tmp_reg, src, 0);
+ src = MIPS_R_AT;
+ }
+ switch (BPF_OP(insn->code)) {
+ case BPF_MOV:
+ if (!did_move)
+ emit_instr(ctx, addu, dst, src, MIPS_R_ZERO);
+ break;
+ case BPF_ADD:
+ emit_instr(ctx, addu, dst, dst, src);
+ break;
+ case BPF_SUB:
+ emit_instr(ctx, subu, dst, dst, src);
+ break;
+ case BPF_XOR:
+ emit_instr(ctx, xor, dst, dst, src);
+ break;
+ case BPF_OR:
+ emit_instr(ctx, or, dst, dst, src);
+ break;
+ case BPF_AND:
+ emit_instr(ctx, and, dst, dst, src);
+ break;
+ case BPF_MUL:
+ emit_instr(ctx, mul, dst, dst, src);
+ break;
+ case BPF_DIV:
+ case BPF_MOD:
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, beq, src, MIPS_R_ZERO, b_off);
+ emit_instr(ctx, movz, MIPS_R_V0, MIPS_R_ZERO, src);
+ emit_instr(ctx, divu, dst, src);
+ if (BPF_OP(insn->code) == BPF_DIV)
+ emit_instr(ctx, mflo, dst);
+ else
+ emit_instr(ctx, mfhi, dst);
+ break;
+ case BPF_LSH:
+ emit_instr(ctx, sllv, dst, dst, src);
+ break;
+ case BPF_RSH:
+ emit_instr(ctx, srlv, dst, dst, src);
+ break;
+ default:
+ pr_err("ALU_REG NOT HANDLED\n");
+ return -EINVAL;
+ }
+ break;
+ case BPF_JMP | BPF_EXIT:
+ if (this_idx + 1 < exit_idx) {
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, beq, MIPS_R_ZERO, MIPS_R_ZERO, b_off);
+ emit_instr(ctx, nop);
+ }
+ break;
+ case BPF_JMP | BPF_JEQ | BPF_K: /* JMP_IMM */
+ case BPF_JMP | BPF_JNE | BPF_K: /* JMP_IMM */
+ cmp_eq = (BPF_OP(insn->code) == BPF_JEQ);
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ if (dst < 0)
+ return dst;
+ if (insn->imm == 0) {
+ src = MIPS_R_ZERO;
+ } else {
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ src = MIPS_R_AT;
+ }
+ goto jeq_common;
+ case BPF_JMP | BPF_JEQ | BPF_X: /* JMP_REG */
+ case BPF_JMP | BPF_JNE | BPF_X:
+ case BPF_JMP | BPF_JSGT | BPF_X:
+ case BPF_JMP | BPF_JSGE | BPF_X:
+ case BPF_JMP | BPF_JGT | BPF_X:
+ case BPF_JMP | BPF_JGE | BPF_X:
+ case BPF_JMP | BPF_JSET | BPF_X:
+ src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (src < 0 || dst < 0)
+ return -EINVAL;
+ td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
+ ts = get_reg_val_type(ctx, this_idx, insn->src_reg);
+ if (td == REG_32BIT && ts != REG_32BIT) {
+ emit_instr(ctx, sll, MIPS_R_AT, src, 0);
+ src = MIPS_R_AT;
+ } else if (ts == REG_32BIT && td != REG_32BIT) {
+ emit_instr(ctx, sll, MIPS_R_AT, dst, 0);
+ dst = MIPS_R_AT;
+ }
+ if (BPF_OP(insn->code) == BPF_JSET) {
+ emit_instr(ctx, and, MIPS_R_AT, dst, src);
+ cmp_eq = false;
+ dst = MIPS_R_AT;
+ src = MIPS_R_ZERO;
+ } else if (BPF_OP(insn->code) == BPF_JSGT) {
+ emit_instr(ctx, dsubu, MIPS_R_AT, dst, src);
+ if ((insn + 1)->code == (BPF_JMP | BPF_EXIT) && insn->off == 1) {
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, blez, MIPS_R_AT, b_off);
+ emit_instr(ctx, nop);
+ return 2; /* We consumed the exit. */
+ }
+ b_off = b_imm(this_idx + insn->off + 1, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, bgtz, MIPS_R_AT, b_off);
+ emit_instr(ctx, nop);
+ break;
+ } else if (BPF_OP(insn->code) == BPF_JSGE) {
+ emit_instr(ctx, slt, MIPS_R_AT, dst, src);
+ cmp_eq = true;
+ dst = MIPS_R_AT;
+ src = MIPS_R_ZERO;
+ } else if (BPF_OP(insn->code) == BPF_JGT) {
+ /* dst or src could be AT */
+ emit_instr(ctx, dsubu, MIPS_R_T8, dst, src);
+ emit_instr(ctx, sltu, MIPS_R_AT, dst, src);
+ /* SP known to be non-zero, movz becomes boolean not */
+ emit_instr(ctx, movz, MIPS_R_T9, MIPS_R_SP, MIPS_R_T8);
+ emit_instr(ctx, movn, MIPS_R_T9, MIPS_R_ZERO, MIPS_R_T8);
+ emit_instr(ctx, or, MIPS_R_AT, MIPS_R_T9, MIPS_R_AT);
+ cmp_eq = true;
+ dst = MIPS_R_AT;
+ src = MIPS_R_ZERO;
+ } else if (BPF_OP(insn->code) == BPF_JGE) {
+ emit_instr(ctx, sltu, MIPS_R_AT, dst, src);
+ cmp_eq = true;
+ dst = MIPS_R_AT;
+ src = MIPS_R_ZERO;
+ } else { /* JNE/JEQ case */
+ cmp_eq = (BPF_OP(insn->code) == BPF_JEQ);
+ }
+jeq_common:
+ /*
+ * If the next insn is EXIT and we are jumping arround
+ * only it, invert the sense of the compare and
+ * conditionally jump to the exit. Poor man's branch
+ * chaining.
+ */
+ if ((insn + 1)->code == (BPF_JMP | BPF_EXIT) && insn->off == 1) {
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off)) {
+ target = j_target(ctx, exit_idx);
+ if (target == (unsigned int)-1)
+ return -E2BIG;
+ cmp_eq = !cmp_eq;
+ b_off = 4 * 3;
+ if (!(ctx->offsets[this_idx] & OFFSETS_B_CONV)) {
+ ctx->offsets[this_idx] |= OFFSETS_B_CONV;
+ ctx->long_b_conversion = 1;
+ }
+ }
+
+ if (cmp_eq)
+ emit_instr(ctx, bne, dst, src, b_off);
+ else
+ emit_instr(ctx, beq, dst, src, b_off);
+ emit_instr(ctx, nop);
+ if (ctx->offsets[this_idx] & OFFSETS_B_CONV) {
+ emit_instr(ctx, j, target);
+ emit_instr(ctx, nop);
+ }
+ return 2; /* We consumed the exit. */
+ }
+ b_off = b_imm(this_idx + insn->off + 1, ctx);
+ if (is_bad_offset(b_off)) {
+ target = j_target(ctx, this_idx + insn->off + 1);
+ if (target == (unsigned int)-1)
+ return -E2BIG;
+ cmp_eq = !cmp_eq;
+ b_off = 4 * 3;
+ if (!(ctx->offsets[this_idx] & OFFSETS_B_CONV)) {
+ ctx->offsets[this_idx] |= OFFSETS_B_CONV;
+ ctx->long_b_conversion = 1;
+ }
+ }
+
+ if (cmp_eq)
+ emit_instr(ctx, beq, dst, src, b_off);
+ else
+ emit_instr(ctx, bne, dst, src, b_off);
+ emit_instr(ctx, nop);
+ if (ctx->offsets[this_idx] & OFFSETS_B_CONV) {
+ emit_instr(ctx, j, target);
+ emit_instr(ctx, nop);
+ }
+ break;
+ case BPF_JMP | BPF_JSGT | BPF_K: /* JMP_IMM */
+ case BPF_JMP | BPF_JSGE | BPF_K: /* JMP_IMM */
+ cmp_eq = (BPF_OP(insn->code) == BPF_JSGE);
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ if (dst < 0)
+ return dst;
+
+ if (insn->imm == 0) {
+ if ((insn + 1)->code == (BPF_JMP | BPF_EXIT) && insn->off == 1) {
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ if (cmp_eq)
+ emit_instr(ctx, bltz, dst, b_off);
+ else
+ emit_instr(ctx, blez, dst, b_off);
+ emit_instr(ctx, nop);
+ return 2; /* We consumed the exit. */
+ }
+ b_off = b_imm(this_idx + insn->off + 1, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ if (cmp_eq)
+ emit_instr(ctx, bgez, dst, b_off);
+ else
+ emit_instr(ctx, bgtz, dst, b_off);
+ emit_instr(ctx, nop);
+ break;
+ }
+ /*
+ * only "LT" compare available, so we must use imm + 1
+ * to generate "GT"
+ */
+ t64s = insn->imm + (cmp_eq ? 0 : 1);
+ if (t64s >= S16_MIN && t64s <= S16_MAX) {
+ emit_instr(ctx, slti, MIPS_R_AT, dst, (int)t64s);
+ src = MIPS_R_AT;
+ dst = MIPS_R_ZERO;
+ cmp_eq = true;
+ goto jeq_common;
+ }
+ emit_const_to_reg(ctx, MIPS_R_AT, (u64)t64s);
+ emit_instr(ctx, slt, MIPS_R_AT, dst, MIPS_R_AT);
+ src = MIPS_R_AT;
+ dst = MIPS_R_ZERO;
+ cmp_eq = true;
+ goto jeq_common;
+
+ case BPF_JMP | BPF_JGT | BPF_K:
+ case BPF_JMP | BPF_JGE | BPF_K:
+ cmp_eq = (BPF_OP(insn->code) == BPF_JGE);
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ if (dst < 0)
+ return dst;
+ /*
+ * only "LT" compare available, so we must use imm + 1
+ * to generate "GT"
+ */
+ t64s = (u64)(u32)(insn->imm) + (cmp_eq ? 0 : 1);
+ if (t64s >= 0 && t64s <= S16_MAX) {
+ emit_instr(ctx, sltiu, MIPS_R_AT, dst, (int)t64s);
+ src = MIPS_R_AT;
+ dst = MIPS_R_ZERO;
+ cmp_eq = true;
+ goto jeq_common;
+ }
+ emit_const_to_reg(ctx, MIPS_R_AT, (u64)t64s);
+ emit_instr(ctx, sltu, MIPS_R_AT, dst, MIPS_R_AT);
+ src = MIPS_R_AT;
+ dst = MIPS_R_ZERO;
+ cmp_eq = true;
+ goto jeq_common;
+
+ case BPF_JMP | BPF_JSET | BPF_K: /* JMP_IMM */
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg_fp_ok);
+ if (dst < 0)
+ return dst;
+
+ if (use_bbit_insns() && hweight32((u32)insn->imm) == 1) {
+ if ((insn + 1)->code == (BPF_JMP | BPF_EXIT) && insn->off == 1) {
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, bbit0, dst, ffs((u32)insn->imm) - 1, b_off);
+ emit_instr(ctx, nop);
+ return 2; /* We consumed the exit. */
+ }
+ b_off = b_imm(this_idx + insn->off + 1, ctx);
+ if (is_bad_offset(b_off))
+ return -E2BIG;
+ emit_instr(ctx, bbit1, dst, ffs((u32)insn->imm) - 1, b_off);
+ emit_instr(ctx, nop);
+ break;
+ }
+ t64 = (u32)insn->imm;
+ emit_const_to_reg(ctx, MIPS_R_AT, t64);
+ emit_instr(ctx, and, MIPS_R_AT, dst, MIPS_R_AT);
+ src = MIPS_R_AT;
+ dst = MIPS_R_ZERO;
+ cmp_eq = false;
+ goto jeq_common;
+
+ case BPF_JMP | BPF_JA:
+ /*
+ * Prefer relative branch for easier debugging, but
+ * fall back if needed.
+ */
+ b_off = b_imm(this_idx + insn->off + 1, ctx);
+ if (is_bad_offset(b_off)) {
+ target = j_target(ctx, this_idx + insn->off + 1);
+ if (target == (unsigned int)-1)
+ return -E2BIG;
+ emit_instr(ctx, j, target);
+ } else {
+ emit_instr(ctx, b, b_off);
+ }
+ emit_instr(ctx, nop);
+ break;
+ case BPF_LD | BPF_DW | BPF_IMM:
+ if (insn->src_reg != 0)
+ return -EINVAL;
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ t64 = ((u64)(u32)insn->imm) | ((u64)(insn + 1)->imm << 32);
+ emit_const_to_reg(ctx, dst, t64);
+ return 2; /* Double slot insn */
+
+ case BPF_JMP | BPF_CALL:
+ ctx->flags |= EBPF_SAVE_RA;
+ t64s = (s64)insn->imm + (s64)__bpf_call_base;
+ emit_const_to_reg(ctx, MIPS_R_T9, (u64)t64s);
+ emit_instr(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
+ /* delay slot */
+ emit_instr(ctx, nop);
+ break;
+
+ case BPF_JMP | BPF_CALL | BPF_X:
+ if (emit_bpf_tail_call(ctx, this_idx))
+ return -EINVAL;
+ break;
+
+ case BPF_LD | BPF_B | BPF_ABS:
+ case BPF_LD | BPF_H | BPF_ABS:
+ case BPF_LD | BPF_W | BPF_ABS:
+ case BPF_LD | BPF_DW | BPF_ABS:
+ ctx->flags |= EBPF_SAVE_RA;
+
+ gen_imm_to_reg(insn, MIPS_R_A1, ctx);
+ emit_instr(ctx, addiu, MIPS_R_A2, MIPS_R_ZERO, size_to_len(insn));
+
+ if (insn->imm < 0) {
+ emit_const_to_reg(ctx, MIPS_R_T9, (u64)bpf_internal_load_pointer_neg_helper);
+ } else {
+ emit_const_to_reg(ctx, MIPS_R_T9, (u64)ool_skb_header_pointer);
+ emit_instr(ctx, daddiu, MIPS_R_A3, MIPS_R_SP, ctx->tmp_offset);
+ }
+ goto ld_skb_common;
+
+ case BPF_LD | BPF_B | BPF_IND:
+ case BPF_LD | BPF_H | BPF_IND:
+ case BPF_LD | BPF_W | BPF_IND:
+ case BPF_LD | BPF_DW | BPF_IND:
+ ctx->flags |= EBPF_SAVE_RA;
+ src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
+ if (src < 0)
+ return src;
+ ts = get_reg_val_type(ctx, this_idx, insn->src_reg);
+ if (ts == REG_32BIT_ZERO_EX) {
+ /* sign extend */
+ emit_instr(ctx, sll, MIPS_R_A1, src, 0);
+ src = MIPS_R_A1;
+ }
+ if (insn->imm >= S16_MIN && insn->imm <= S16_MAX) {
+ emit_instr(ctx, daddiu, MIPS_R_A1, src, insn->imm);
+ } else {
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ emit_instr(ctx, daddu, MIPS_R_A1, MIPS_R_AT, src);
+ }
+ /* truncate to 32-bit int */
+ emit_instr(ctx, sll, MIPS_R_A1, MIPS_R_A1, 0);
+ emit_instr(ctx, daddiu, MIPS_R_A3, MIPS_R_SP, ctx->tmp_offset);
+ emit_instr(ctx, slt, MIPS_R_AT, MIPS_R_A1, MIPS_R_ZERO);
+
+ emit_const_to_reg(ctx, MIPS_R_T8, (u64)bpf_internal_load_pointer_neg_helper);
+ emit_const_to_reg(ctx, MIPS_R_T9, (u64)ool_skb_header_pointer);
+ emit_instr(ctx, addiu, MIPS_R_A2, MIPS_R_ZERO, size_to_len(insn));
+ emit_instr(ctx, movn, MIPS_R_T9, MIPS_R_T8, MIPS_R_AT);
+
+ld_skb_common:
+ emit_instr(ctx, jalr, MIPS_R_RA, MIPS_R_T9);
+ /* delay slot move */
+ emit_instr(ctx, daddu, MIPS_R_A0, MIPS_R_S0, MIPS_R_ZERO);
+
+ /* Check the error value */
+ b_off = b_imm(exit_idx, ctx);
+ if (is_bad_offset(b_off)) {
+ target = j_target(ctx, exit_idx);
+ if (target == (unsigned int)-1)
+ return -E2BIG;
+
+ if (!(ctx->offsets[this_idx] & OFFSETS_B_CONV)) {
+ ctx->offsets[this_idx] |= OFFSETS_B_CONV;
+ ctx->long_b_conversion = 1;
+ }
+ emit_instr(ctx, bne, MIPS_R_V0, MIPS_R_ZERO, 4 * 3);
+ emit_instr(ctx, nop);
+ emit_instr(ctx, j, target);
+ emit_instr(ctx, nop);
+ } else {
+ emit_instr(ctx, beq, MIPS_R_V0, MIPS_R_ZERO, b_off);
+ emit_instr(ctx, nop);
+ }
+
+#ifdef __BIG_ENDIAN
+ need_swap = false;
+#else
+ need_swap = true;
+#endif
+ dst = MIPS_R_V0;
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_B:
+ emit_instr(ctx, lbu, dst, 0, MIPS_R_V0);
+ break;
+ case BPF_H:
+ emit_instr(ctx, lhu, dst, 0, MIPS_R_V0);
+ if (need_swap)
+ emit_instr(ctx, wsbh, dst, dst);
+ break;
+ case BPF_W:
+ emit_instr(ctx, lw, dst, 0, MIPS_R_V0);
+ if (need_swap) {
+ emit_instr(ctx, wsbh, dst, dst);
+ emit_instr(ctx, rotr, dst, dst, 16);
+ }
+ break;
+ case BPF_DW:
+ emit_instr(ctx, ld, dst, 0, MIPS_R_V0);
+ if (need_swap) {
+ emit_instr(ctx, dsbh, dst, dst);
+ emit_instr(ctx, dshd, dst, dst);
+ }
+ break;
+ }
+
+ break;
+ case BPF_ALU | BPF_END | BPF_FROM_BE:
+ case BPF_ALU | BPF_END | BPF_FROM_LE:
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
+ if (insn->imm == 64 && td == REG_32BIT)
+ emit_instr(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
+
+ if (insn->imm != 64 &&
+ (td == REG_64BIT || td == REG_32BIT_ZERO_EX)) {
+ /* sign extend */
+ emit_instr(ctx, sll, dst, dst, 0);
+ }
+
+#ifdef __BIG_ENDIAN
+ need_swap = (BPF_SRC(insn->code) == BPF_FROM_LE);
+#else
+ need_swap = (BPF_SRC(insn->code) == BPF_FROM_BE);
+#endif
+ if (insn->imm == 16) {
+ if (need_swap)
+ emit_instr(ctx, wsbh, dst, dst);
+ emit_instr(ctx, andi, dst, dst, 0xffff);
+ } else if (insn->imm == 32) {
+ if (need_swap) {
+ emit_instr(ctx, wsbh, dst, dst);
+ emit_instr(ctx, rotr, dst, dst, 16);
+ }
+ } else { /* 64-bit*/
+ if (need_swap) {
+ emit_instr(ctx, dsbh, dst, dst);
+ emit_instr(ctx, dshd, dst, dst);
+ }
+ }
+ break;
+
+ case BPF_ST | BPF_B | BPF_MEM:
+ case BPF_ST | BPF_H | BPF_MEM:
+ case BPF_ST | BPF_W | BPF_MEM:
+ case BPF_ST | BPF_DW | BPF_MEM:
+ if (insn->dst_reg == BPF_REG_10) {
+ ctx->flags |= EBPF_SEEN_FP;
+ dst = MIPS_R_SP;
+ mem_off = insn->off + MAX_BPF_STACK;
+ } else {
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ mem_off = insn->off;
+ }
+ gen_imm_to_reg(insn, MIPS_R_AT, ctx);
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_B:
+ emit_instr(ctx, sb, MIPS_R_AT, mem_off, dst);
+ break;
+ case BPF_H:
+ emit_instr(ctx, sh, MIPS_R_AT, mem_off, dst);
+ break;
+ case BPF_W:
+ emit_instr(ctx, sw, MIPS_R_AT, mem_off, dst);
+ break;
+ case BPF_DW:
+ emit_instr(ctx, sd, MIPS_R_AT, mem_off, dst);
+ break;
+ }
+ break;
+
+ case BPF_LDX | BPF_B | BPF_MEM:
+ case BPF_LDX | BPF_H | BPF_MEM:
+ case BPF_LDX | BPF_W | BPF_MEM:
+ case BPF_LDX | BPF_DW | BPF_MEM:
+ if (insn->src_reg == BPF_REG_10) {
+ ctx->flags |= EBPF_SEEN_FP;
+ src = MIPS_R_SP;
+ mem_off = insn->off + MAX_BPF_STACK;
+ } else {
+ src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
+ if (src < 0)
+ return src;
+ mem_off = insn->off;
+ }
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_B:
+ emit_instr(ctx, lbu, dst, mem_off, src);
+ break;
+ case BPF_H:
+ emit_instr(ctx, lhu, dst, mem_off, src);
+ break;
+ case BPF_W:
+ emit_instr(ctx, lw, dst, mem_off, src);
+ break;
+ case BPF_DW:
+ emit_instr(ctx, ld, dst, mem_off, src);
+ break;
+ }
+ break;
+
+ case BPF_STX | BPF_B | BPF_MEM:
+ case BPF_STX | BPF_H | BPF_MEM:
+ case BPF_STX | BPF_W | BPF_MEM:
+ case BPF_STX | BPF_DW | BPF_MEM:
+ case BPF_STX | BPF_W | BPF_XADD:
+ case BPF_STX | BPF_DW | BPF_XADD:
+ if (insn->dst_reg == BPF_REG_10) {
+ ctx->flags |= EBPF_SEEN_FP;
+ dst = MIPS_R_SP;
+ mem_off = insn->off + MAX_BPF_STACK;
+ } else {
+ dst = ebpf_to_mips_reg(ctx, insn, dst_reg);
+ if (dst < 0)
+ return dst;
+ mem_off = insn->off;
+ }
+ src = ebpf_to_mips_reg(ctx, insn, src_reg_no_fp);
+ if (src < 0)
+ return dst;
+ if (BPF_MODE(insn->code) == BPF_XADD) {
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_W:
+ if (get_reg_val_type(ctx, this_idx, insn->src_reg) == REG_32BIT) {
+ emit_instr(ctx, sll, MIPS_R_AT, src, 0);
+ src = MIPS_R_AT;
+ }
+ emit_instr(ctx, ll, MIPS_R_T8, mem_off, dst);
+ emit_instr(ctx, addu, MIPS_R_T8, MIPS_R_T8, src);
+ emit_instr(ctx, sc, MIPS_R_T8, mem_off, dst);
+ /*
+ * On failure back up to LL (-4
+ * instructions of 4 bytes each
+ */
+ emit_instr(ctx, beq, MIPS_R_T8, MIPS_R_ZERO, -4 * 4);
+ emit_instr(ctx, nop);
+ break;
+ case BPF_DW:
+ if (get_reg_val_type(ctx, this_idx, insn->src_reg) == REG_32BIT) {
+ emit_instr(ctx, daddu, MIPS_R_AT, src, MIPS_R_ZERO);
+ emit_instr(ctx, dinsu, MIPS_R_AT, MIPS_R_ZERO, 32, 32);
+ src = MIPS_R_AT;
+ }
+ emit_instr(ctx, lld, MIPS_R_T8, mem_off, dst);
+ emit_instr(ctx, daddu, MIPS_R_T8, MIPS_R_T8, src);
+ emit_instr(ctx, scd, MIPS_R_T8, mem_off, dst);
+ emit_instr(ctx, beq, MIPS_R_T8, MIPS_R_ZERO, -4 * 4);
+ emit_instr(ctx, nop);
+ break;
+ }
+ } else { /* BPF_MEM */
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_B:
+ emit_instr(ctx, sb, src, mem_off, dst);
+ break;
+ case BPF_H:
+ emit_instr(ctx, sh, src, mem_off, dst);
+ break;
+ case BPF_W:
+ emit_instr(ctx, sw, src, mem_off, dst);
+ break;
+ case BPF_DW:
+ if (get_reg_val_type(ctx, this_idx, insn->src_reg) == REG_32BIT) {
+ emit_instr(ctx, daddu, MIPS_R_AT, src, MIPS_R_ZERO);
+ emit_instr(ctx, dinsu, MIPS_R_AT, MIPS_R_ZERO, 32, 32);
+ src = MIPS_R_AT;
+ }
+ emit_instr(ctx, sd, src, mem_off, dst);
+ break;
+ }
+ }
+ break;
+
+ default:
+ pr_err("NOT HANDLED %d - (%02x)\n",
+ this_idx, (unsigned int)insn->code);
+ return -EINVAL;
+ }
+ return 1;
+}
+
+#define RVT_VISITED_MASK 0xc000000000000000ull
+#define RVT_FALL_THROUGH 0x4000000000000000ull
+#define RVT_BRANCH_TAKEN 0x8000000000000000ull
+#define RVT_DONE (RVT_FALL_THROUGH | RVT_BRANCH_TAKEN)
+
+static int build_int_body(struct jit_ctx *ctx)
+{
+ const struct bpf_prog *prog = ctx->skf;
+ const struct bpf_insn *insn;
+ int i, r;
+
+ for (i = 0; i < prog->len; ) {
+ insn = prog->insnsi + i;
+ if ((ctx->reg_val_types[i] & RVT_VISITED_MASK) == 0) {
+ /* dead instruction, don't emit it. */
+ i++;
+ continue;
+ }
+
+ if (ctx->target == NULL)
+ ctx->offsets[i] = (ctx->offsets[i] & OFFSETS_B_CONV) | (ctx->idx * 4);
+
+ r = build_one_insn(insn, ctx, i, prog->len);
+ if (r < 0)
+ return r;
+ i += r;
+ }
+ /* epilogue offset */
+ if (ctx->target == NULL)
+ ctx->offsets[i] = ctx->idx * 4;
+
+ /*
+ * All exits have an offset of the epilogue, some offsets may
+ * not have been set due to banch-around threading, so set
+ * them now.
+ */
+ if (ctx->target == NULL)
+ for (i = 0; i < prog->len; i++) {
+ insn = prog->insnsi + i;
+ if (insn->code == (BPF_JMP | BPF_EXIT))
+ ctx->offsets[i] = ctx->idx * 4;
+ }
+ return 0;
+}
+
+/* return the last idx processed, or negative for error */
+static int reg_val_propagate_range(struct jit_ctx *ctx, u64 initial_rvt,
+ int start_idx, bool follow_taken)
+{
+ const struct bpf_prog *prog = ctx->skf;
+ const struct bpf_insn *insn;
+ u64 exit_rvt = initial_rvt;
+ u64 *rvt = ctx->reg_val_types;
+ int idx;
+ int reg;
+
+ for (idx = start_idx; idx < prog->len; idx++) {
+ rvt[idx] = (rvt[idx] & RVT_VISITED_MASK) | exit_rvt;
+ insn = prog->insnsi + idx;
+ switch (BPF_CLASS(insn->code)) {
+ case BPF_ALU:
+ switch (BPF_OP(insn->code)) {
+ case BPF_ADD:
+ case BPF_SUB:
+ case BPF_MUL:
+ case BPF_DIV:
+ case BPF_OR:
+ case BPF_AND:
+ case BPF_LSH:
+ case BPF_RSH:
+ case BPF_NEG:
+ case BPF_MOD:
+ case BPF_XOR:
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT);
+ break;
+ case BPF_MOV:
+ if (BPF_SRC(insn->code)) {
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT);
+ } else {
+ /* IMM to REG move*/
+ if (insn->imm >= 0)
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT_POS);
+ else
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT);
+ }
+ break;
+ case BPF_END:
+ if (insn->imm == 64)
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT);
+ else if (insn->imm == 32)
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT);
+ else /* insn->imm == 16 */
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT_POS);
+ break;
+ }
+ rvt[idx] |= RVT_DONE;
+ break;
+ case BPF_ALU64:
+ switch (BPF_OP(insn->code)) {
+ case BPF_MOV:
+ if (BPF_SRC(insn->code)) {
+ /* REG to REG move*/
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT);
+ } else {
+ /* IMM to REG move*/
+ if (insn->imm >= 0)
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT_POS);
+ else
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT_32BIT);
+ }
+ break;
+ default:
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT);
+ }
+ rvt[idx] |= RVT_DONE;
+ break;
+ case BPF_LD:
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_DW:
+ if (BPF_MODE(insn->code) == BPF_IMM) {
+ s64 val;
+
+ val = (s64)((u32)insn->imm | ((u64)(insn + 1)->imm << 32));
+ if (val > 0 && val <= S32_MAX)
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT_POS);
+ else if (val >= S32_MIN && val <= S32_MAX)
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT_32BIT);
+ else
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT);
+ rvt[idx] |= RVT_DONE;
+ idx++;
+ } else {
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT);
+ }
+ break;
+ case BPF_B:
+ case BPF_H:
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT_POS);
+ break;
+ case BPF_W:
+ if (BPF_MODE(insn->code) == BPF_IMM)
+ set_reg_val_type(&exit_rvt, insn->dst_reg,
+ insn->imm >= 0 ? REG_32BIT_POS : REG_32BIT);
+ else
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT);
+ break;
+ }
+ rvt[idx] |= RVT_DONE;
+ break;
+ case BPF_LDX:
+ switch (BPF_SIZE(insn->code)) {
+ case BPF_DW:
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_64BIT);
+ break;
+ case BPF_B:
+ case BPF_H:
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT_POS);
+ break;
+ case BPF_W:
+ set_reg_val_type(&exit_rvt, insn->dst_reg, REG_32BIT);
+ break;
+ }
+ rvt[idx] |= RVT_DONE;
+ break;
+ case BPF_JMP:
+ switch (BPF_OP(insn->code)) {
+ case BPF_EXIT:
+ rvt[idx] = RVT_DONE | exit_rvt;
+ rvt[prog->len] = exit_rvt;
+ return idx;
+ case BPF_JA:
+ rvt[idx] |= RVT_DONE;
+ idx += insn->off;
+ break;
+ case BPF_JEQ:
+ case BPF_JGT:
+ case BPF_JGE:
+ case BPF_JSET:
+ case BPF_JNE:
+ case BPF_JSGT:
+ case BPF_JSGE:
+ if (follow_taken) {
+ rvt[idx] |= RVT_BRANCH_TAKEN;
+ idx += insn->off;
+ follow_taken = false;
+ } else {
+ rvt[idx] |= RVT_FALL_THROUGH;
+ }
+ break;
+ case BPF_CALL:
+ set_reg_val_type(&exit_rvt, BPF_REG_0, REG_64BIT);
+ /* Upon call return, argument registers are clobbered. */
+ for (reg = BPF_REG_0; reg <= BPF_REG_5; reg++)
+ set_reg_val_type(&exit_rvt, reg, REG_64BIT);
+
+ rvt[idx] |= RVT_DONE;
+ break;
+ default:
+ WARN(1, "Unhandled BPF_JMP case.\n");
+ rvt[idx] |= RVT_DONE;
+ break;
+ }
+ break;
+ default:
+ rvt[idx] |= RVT_DONE;
+ break;
+ }
+ }
+ return idx;
+}
+
+/*
+ * Track the value range (i.e. 32-bit vs. 64-bit) of each register at
+ * each eBPF insn. This allows unneeded sign and zero extension
+ * operations to be omitted.
+ *
+ * Doesn't handle yet confluence of control paths with conflicting
+ * ranges, but it is good enough for most sane code.
+ */
+static int reg_val_propagate(struct jit_ctx *ctx)
+{
+ const struct bpf_prog *prog = ctx->skf;
+ u64 exit_rvt;
+ int reg;
+ int i;
+
+ /*
+ * 11 registers * 3 bits/reg leaves top bits free for other
+ * uses. Bit-62..63 used to see if we have visited an insn.
+ */
+ exit_rvt = 0;
+
+ /* Upon entry, argument registers are 64-bit. */
+ for (reg = BPF_REG_1; reg <= BPF_REG_5; reg++)
+ set_reg_val_type(&exit_rvt, reg, REG_64BIT);
+
+ /*
+ * First follow all conditional branches on the fall-through
+ * edge of control flow..
+ */
+ reg_val_propagate_range(ctx, exit_rvt, 0, false);
+restart_search:
+ /*
+ * Then repeatedly find the first conditional branch where
+ * both edges of control flow have not been taken, and follow
+ * the branch taken edge. We will end up restarting the
+ * search once per conditional branch insn.
+ */
+ for (i = 0; i < prog->len; i++) {
+ u64 rvt = ctx->reg_val_types[i];
+
+ if ((rvt & RVT_VISITED_MASK) == RVT_DONE ||
+ (rvt & RVT_VISITED_MASK) == 0)
+ continue;
+ if ((rvt & RVT_VISITED_MASK) == RVT_FALL_THROUGH) {
+ reg_val_propagate_range(ctx, rvt & ~RVT_VISITED_MASK, i, true);
+ } else { /* RVT_BRANCH_TAKEN */
+ WARN(1, "Unexpected RVT_BRANCH_TAKEN case.\n");
+ reg_val_propagate_range(ctx, rvt & ~RVT_VISITED_MASK, i, false);
+ }
+ goto restart_search;
+ }
+ /*
+ * Eventually all conditional branches have been followed on
+ * both branches and we are done. Any insn that has not been
+ * visited at this point is dead.
+ */
+
+ return 0;
+}
+
+static void jit_fill_hole(void *area, unsigned int size)
+{
+ u32 *p;
+
+ /* We are guaranteed to have aligned memory. */
+ for (p = area; size >= sizeof(u32); size -= sizeof(u32))
+ uasm_i_break(&p, BRK_BUG); /* Increments p */
+}
+
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
+{
+ struct bpf_prog *orig_prog = prog;
+ bool tmp_blinded = false;
+ struct bpf_prog *tmp;
+ struct bpf_binary_header *header = NULL;
+ struct jit_ctx ctx;
+ unsigned int image_size;
+ u8 *image_ptr;
+
+ if (!bpf_jit_enable || !cpu_has_mips64r2)
+ return prog;
+
+ tmp = bpf_jit_blind_constants(prog);
+ /* If blinding was requested and we failed during blinding,
+ * we must fall back to the interpreter.
+ */
+ if (IS_ERR(tmp))
+ return orig_prog;
+ if (tmp != prog) {
+ tmp_blinded = true;
+ prog = tmp;
+ }
+
+ memset(&ctx, 0, sizeof(ctx));
+
+ ctx.offsets = kcalloc(prog->len + 1, sizeof(*ctx.offsets), GFP_KERNEL);
+ if (ctx.offsets == NULL)
+ goto out_err;
+
+ ctx.reg_val_types = kcalloc(prog->len + 1, sizeof(*ctx.reg_val_types), GFP_KERNEL);
+ if (ctx.reg_val_types == NULL)
+ goto out_err;
+
+ ctx.skf = prog;
+
+ if (reg_val_propagate(&ctx))
+ goto out_err;
+
+ /*
+ * First pass discovers used resources and instruction offsets
+ * assuming short branches are used.
+ */
+ if (build_int_body(&ctx))
+ goto out_err;
+
+ /*
+ * If no calls are made (EBPF_SAVE_RA), then tail call count
+ * in $v1, else we must save in n$s4.
+ */
+ if (ctx.flags & EBPF_SEEN_TC) {
+ if (ctx.flags & EBPF_SAVE_RA)
+ ctx.flags |= EBPF_SAVE_S4;
+ else
+ ctx.flags |= EBPF_TCC_IN_V1;
+ }
+
+ /*
+ * Second pass generates offsets, if any branches are out of
+ * range a jump-around long sequence is generated, and we have
+ * to try again from the beginning to generate the new
+ * offsets. This is done until no additional conversions are
+ * necessary.
+ */
+ do {
+ ctx.idx = 0;
+ ctx.gen_b_offsets = 1;
+ ctx.long_b_conversion = 0;
+ if (gen_int_prologue(&ctx))
+ goto out_err;
+ if (build_int_body(&ctx))
+ goto out_err;
+ if (build_int_epilogue(&ctx, MIPS_R_RA))
+ goto out_err;
+ } while (ctx.long_b_conversion);
+
+ image_size = 4 * ctx.idx;
+
+ header = bpf_jit_binary_alloc(image_size, &image_ptr,
+ sizeof(u32), jit_fill_hole);
+ if (header == NULL)
+ goto out_err;
+
+ ctx.target = (u32 *)image_ptr;
+
+ /* Third pass generates the code */
+ ctx.idx = 0;
+ if (gen_int_prologue(&ctx))
+ goto out_err;
+ if (build_int_body(&ctx))
+ goto out_err;
+ if (build_int_epilogue(&ctx, MIPS_R_RA))
+ goto out_err;
+
+ /* Update the icache */
+ flush_icache_range((unsigned long)ctx.target,
+ (unsigned long)(ctx.target + ctx.idx * sizeof(u32)));
+
+ if (bpf_jit_enable > 1)
+ /* Dump JIT code */
+ bpf_jit_dump(prog->len, image_size, 2, ctx.target);
+
+ bpf_jit_binary_lock_ro(header);
+ prog->bpf_func = (void *)ctx.target;
+ prog->jited = 1;
+out_normal:
+ if (tmp_blinded)
+ bpf_jit_prog_release_other(prog, prog == orig_prog ?
+ tmp : orig_prog);
+ kfree(ctx.offsets);
+ kfree(ctx.reg_val_types);
+
+ return prog;
+
+out_err:
+ prog = orig_prog;
+ if (header)
+ bpf_jit_binary_free(header);
+ goto out_normal;
+}
--
2.9.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 5/5] MIPS: Give __secure_computing() access to syscall arguments.
2017-06-13 22:28 ` David Daney
` (5 preceding siblings ...)
(?)
@ 2017-06-13 22:28 ` David Daney
-1 siblings, 0 replies; 12+ messages in thread
From: David Daney @ 2017-06-13 22:28 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn, David Daney
KProbes of __seccomp_filter() are not very useful without access to
the syscall arguments.
Do what x86 does, and populate a struct seccomp_data to be passed to
__secure_computing(). This allows samples/bpf/tracex5 to extract a
sensible trace.
Signed-off-by: David Daney <david.daney@cavium.com>
---
arch/mips/kernel/ptrace.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 6931fe7..ba3b1f7 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -868,8 +868,26 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
tracehook_report_syscall_entry(regs))
return -1;
- if (secure_computing(NULL) == -1)
- return -1;
+#ifdef CONFIG_SECCOMP
+ if (unlikely(test_thread_flag(TIF_SECCOMP))) {
+ int ret, i;
+ struct seccomp_data sd;
+
+ sd.nr = syscall;
+ sd.arch = syscall_get_arch();
+ for (i = 0; i < 6; i++) {
+ unsigned long v, r;
+
+ r = mips_get_syscall_arg(&v, current, regs, i);
+ sd.args[i] = r ? 0 : v;
+ }
+ sd.instruction_pointer = KSTK_EIP(current);
+
+ ret = __secure_computing(&sd);
+ if (ret == -1)
+ return ret;
+ }
+#endif
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
trace_sys_enter(regs, regs->regs[2]);
--
2.9.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v2 4/5] MIPS: Add support for eBPF JIT.
2017-06-13 22:28 ` [PATCH v2 4/5] MIPS: Add support for eBPF JIT David Daney
@ 2017-06-14 0:04 ` Daniel Borkmann
2017-06-15 16:37 ` James Cowgill
1 sibling, 0 replies; 12+ messages in thread
From: Daniel Borkmann @ 2017-06-14 0:04 UTC (permalink / raw)
To: David Daney, Alexei Starovoitov, netdev, linux-kernel, linux-mips, ralf
Cc: Markos Chandras, Matt Redfearn
On 06/14/2017 12:28 AM, David Daney wrote:
> Since the eBPF machine has 64-bit registers, we only support this in
> 64-bit kernels. As of the writing of this commit log test-bpf is showing:
>
> test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]
>
> All current test cases are successfully compiled.
>
> Many examples in samples/bpf are usable, specifically tracex5 which
> uses tail calls works.
>
> Signed-off-by: David Daney <david.daney@cavium.com>
Awesome work, David! The bits interacting with core BPF look
good to me.
Fyi, when Ralf merges this and it goes later on to Linus, there
will be two minor (silent) merge conflicts with net-next tree
(depending which one gets there first):
1) In bpf_int_jit_compile(), below the jited = 1 assignment, there
needs to come a prog->jited_len = image_size.
2) The internal tail call opcode changed from BPF_JMP | BPF_CALL | BPF_X
into BPF_JMP | BPF_TAIL_CALL.
Cheers,
Daniel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 0/5] MIPS: Implement eBPF JIT.
2017-06-13 22:28 ` David Daney
` (6 preceding siblings ...)
(?)
@ 2017-06-14 9:48 ` Ralf Baechle
-1 siblings, 0 replies; 12+ messages in thread
From: Ralf Baechle @ 2017-06-14 9:48 UTC (permalink / raw)
To: David Daney
Cc: Alexei Starovoitov, Daniel Borkmann, netdev, linux-kernel,
linux-mips, Markos Chandras, Matt Redfearn
On Tue, Jun 13, 2017 at 03:28:42PM -0700, David Daney wrote:
> Changes in v2:
>
> - Squash a couple of the uasm cleanups.
>
> - Make insn_table_MM const (suggested by Matt Redfearn)
>
> - Put the eBPF in its own source file (should fix build
> warnings/errors on 32-bit kernel builds).
>
> - Use bpf_jit_binary_alloc() (suggested by Daniel Borkmann)
>
> - Implement tail calls.
>
> - Fix system call tracing to extract arguments for
> kprobe/__seccomp_filter() tracing (perhaps not really part the the
> JIT, but necessary to have fun with the samples/bpf programs).
>
> Most things in samples/bpf work, still working on the incantations to
> build tools/testing/selftests/bpf/ ...
>
>
> >From v1:
>
> The first three patches improve MIPS uasm in preparation for use by
> the JIT. Then the eBPF JIT implementation.
>
> I am CCing netdev@ and the BPF maintainers for their comments, but
> would expect Ralf to merge via the MIPS tree if and when it all looks
> good.
Thanks, applied after fixing a minor conflict in arch/mips/Kconfig.
Ralf
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 4/5] MIPS: Add support for eBPF JIT.
@ 2017-06-15 16:37 ` James Cowgill
0 siblings, 0 replies; 12+ messages in thread
From: James Cowgill @ 2017-06-15 16:37 UTC (permalink / raw)
To: ralf; +Cc: linux-mips
[-- Attachment #1.1: Type: text/plain, Size: 1961 bytes --]
Hi Ralf,
On 13/06/17 23:28, David Daney wrote:
> Since the eBPF machine has 64-bit registers, we only support this in
> 64-bit kernels. As of the writing of this commit log test-bpf is showing:
>
> test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]
>
> All current test cases are successfully compiled.
>
> Many examples in samples/bpf are usable, specifically tracex5 which
> uses tail calls works.
>
> Signed-off-by: David Daney <david.daney@cavium.com>
I think you've misapplied this patch to upstream-sfr. I see the
following commit, but it's missing the ebpf_jit.c file.
commit bb45edc82b3c1608026b5a7aeb0876ec31735359
Author: David Daney <david.daney@cavium.com>
Date: Tue Jun 13 15:28:46 2017 -0700
MIPS: Add support for eBPF JIT.
Since the eBPF machine has 64-bit registers, we only support this in
64-bit kernels. As of the writing of this commit log test-bpf is showing:
test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]
All current test cases are successfully compiled.
Many examples in samples/bpf are usable, specifically tracex5 which
uses tail calls works.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16369/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/Kconfig | 12 +++++++++++-
arch/mips/net/Makefile | 3 ++-
2 files changed, 13 insertions(+), 2 deletions(-)
This is causing my builds to fail with:
make[4]: *** No rule to make target 'arch/mips/net/ebpf_jit.o', needed by 'arch/mips/net/built-in.o'. Stop.
James
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v2 4/5] MIPS: Add support for eBPF JIT.
@ 2017-06-15 16:37 ` James Cowgill
0 siblings, 0 replies; 12+ messages in thread
From: James Cowgill @ 2017-06-15 16:37 UTC (permalink / raw)
To: ralf; +Cc: linux-mips
[-- Attachment #1.1: Type: text/plain, Size: 1961 bytes --]
Hi Ralf,
On 13/06/17 23:28, David Daney wrote:
> Since the eBPF machine has 64-bit registers, we only support this in
> 64-bit kernels. As of the writing of this commit log test-bpf is showing:
>
> test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]
>
> All current test cases are successfully compiled.
>
> Many examples in samples/bpf are usable, specifically tracex5 which
> uses tail calls works.
>
> Signed-off-by: David Daney <david.daney@cavium.com>
I think you've misapplied this patch to upstream-sfr. I see the
following commit, but it's missing the ebpf_jit.c file.
commit bb45edc82b3c1608026b5a7aeb0876ec31735359
Author: David Daney <david.daney@cavium.com>
Date: Tue Jun 13 15:28:46 2017 -0700
MIPS: Add support for eBPF JIT.
Since the eBPF machine has 64-bit registers, we only support this in
64-bit kernels. As of the writing of this commit log test-bpf is showing:
test_bpf: Summary: 316 PASSED, 0 FAILED, [308/308 JIT'ed]
All current test cases are successfully compiled.
Many examples in samples/bpf are usable, specifically tracex5 which
uses tail calls works.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16369/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/Kconfig | 12 +++++++++++-
arch/mips/net/Makefile | 3 ++-
2 files changed, 13 insertions(+), 2 deletions(-)
This is causing my builds to fail with:
make[4]: *** No rule to make target 'arch/mips/net/ebpf_jit.o', needed by 'arch/mips/net/built-in.o'. Stop.
James
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-06-15 16:38 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-13 22:28 [PATCH v2 0/5] MIPS: Implement eBPF JIT David Daney
2017-06-13 22:28 ` David Daney
2017-06-13 22:28 ` David Daney
2017-06-13 22:28 ` [PATCH v2 1/5] MIPS: Optimize uasm insn lookup David Daney
2017-06-13 22:28 ` [PATCH v2 2/5] MIPS: Correctly define DBSHFL type instruction opcodes David Daney
2017-06-13 22:28 ` [PATCH v2 3/5] MIPS: Add some instructions to uasm David Daney
2017-06-13 22:28 ` [PATCH v2 4/5] MIPS: Add support for eBPF JIT David Daney
2017-06-14 0:04 ` Daniel Borkmann
2017-06-15 16:37 ` James Cowgill
2017-06-15 16:37 ` James Cowgill
2017-06-13 22:28 ` [PATCH v2 5/5] MIPS: Give __secure_computing() access to syscall arguments David Daney
2017-06-14 9:48 ` [PATCH v2 0/5] MIPS: Implement eBPF JIT Ralf Baechle
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.