[PATCH 4.9 00/44] 4.9.35-stable review

[PATCH 4.9 00/44] 4.9.35-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.35 release.
There are 44 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Jun 29 14:10:54 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.35-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.35-rc1

Arend Van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()

Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
    jump label: fix passing kbuild_cflags when checking for asm goto support

Russell King <rmk+kernel@armlinux.org.uk>
    net: phy: fix marvell phy status reading

Hauke Mehrtens <hauke@hauke-m.de>
    spi: double time out tolerance

Matthias Reichl <hias@horus.com>
    dmaengine: bcm2835: Fix cyclic DMA period splitting

Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
    net: phy: Initialize mdio clock at probe function

Stanislaw Gruszka <sgruszka@redhat.com>
    rt2x00: avoid introducing a USB dependency in the rt2x00lib module

William Wu <william.wu@rock-chips.com>
    usb: gadget: f_fs: avoid out of bounds access on comp_desc

Joël Esponde <joel.esponde@honeywell.com>
    mtd: spi-nor: fix spansion quad enable

Tobias Wolf <dev-NTEO@vplace.de>
    of: Add check to of_scan_flat_dt() before accessing initial_boot_params

David Howells <dhowells@redhat.com>
    rxrpc: Fix several cases where a padded len isn't checked in ticket decode

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu: adjust default display clock

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: add a quirk for Toshiba Satellite L20-183

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: add a PX quirk for another K53TK variant

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Reject immediate data underflow larger than SCSI transfer length

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Fix kref->refcount underflow in transport_cmd_finish_abort

Will Deacon <will.deacon@arm.com>
    arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW

John Stultz <john.stultz@linaro.org>
    time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting

John Stultz <john.stultz@linaro.org>
    time: Fix clock->read(clock) race around clocksource changes

Arend Van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: unbind all devices upon failure in firmware callback

Arend Van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: use firmware callback upon failure to load

Arend Van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: add parameter to pass error code in firmware callback

Daniel Drake <drake@endlessm.com>
    Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    powerpc/64s: Handle data breakpoints in Radix mode

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    powerpc/kprobes: Pause function_graph tracing during jprobes handling

Eric W. Biederman <ebiederm@xmission.com>
    signal: Only reschedule timers on signals timers have sent

Sebastian Parschauer <sparschauer@suse.de>
    HID: Add quirk for Dell PIXART OEM mouse

Raju Rangoju <rajur@chelsio.com>
    cxgb4: notify uP to route ctrlq compl to rdma rspq

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Improve readdir verbosity

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Context-switch EBB registers properly

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Preserve userspace HTM state properly

Heiko Carstens <heiko.carstens@de.ibm.com>
    KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows

Kan Liang <Kan.liang@intel.com>
    perf/x86/intel: Add 1G DTLB load/store miss support for SKL

Ilya Matveychikov <matvejchikov@gmail.com>
    lib/cmdline.c: fix get_options() overflow while parsing ranges

NeilBrown <neilb@suse.com>
    autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL

Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
    powerpc/perf: Fix oops when kthread execs user process

Kees Cook <keescook@chromium.org>
    fs/exec.c: account for argv/envp pointers

Takashi Iwai <tiwai@suse.de>
    ALSA: pcm: Don't treat NULL chmap as a fatal error

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib: Fix stall of process context at packet error

Jan Beulich <jbeulich@suse.com>
    xen-blkback: don't leak stack data via response ring

Juergen Gross <jgross@suse.com>
    xen/blkback: fix disconnect while I/Os in flight

Chen-Yu Tsai <wens@csie.org>
    clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset


-------------

Diffstat:

 Makefile                                           | 16 ++---
 arch/arm64/kernel/vdso.c                           |  5 +-
 arch/arm64/kernel/vdso/gettimeofday.S              |  1 -
 arch/powerpc/kernel/exceptions-64s.S               | 11 ++--
 arch/powerpc/kernel/kprobes.c                      | 11 ++++
 arch/powerpc/kvm/book3s_hv.c                       | 36 +++++++++++
 arch/powerpc/perf/perf_regs.c                      |  3 +-
 arch/s390/kvm/gaccess.c                            | 15 ++---
 arch/x86/events/intel/core.c                       |  4 +-
 drivers/block/xen-blkback/blkback.c                | 23 +++----
 drivers/block/xen-blkback/common.h                 | 26 ++------
 drivers/block/xen-blkback/xenbus.c                 |  7 ++-
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c               |  2 +-
 drivers/dma/bcm2835-dma.c                          |  5 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c       |  4 ++
 drivers/gpu/drm/amd/amdgpu/atombios_crtc.c         |  4 +-
 drivers/gpu/drm/radeon/radeon_combios.c            |  7 +++
 drivers/gpu/drm/radeon/radeon_device.c             |  4 ++
 drivers/hid/hid-ids.h                              |  3 +
 drivers/hid/usbhid/hid-quirks.c                    |  1 +
 drivers/input/serio/i8042-x86ia64io.h              |  7 +++
 drivers/mtd/spi-nor/spi-nor.c                      |  7 +++
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    | 10 +--
 drivers/net/phy/marvell.c                          |  2 -
 drivers/net/phy/mdio-bcm-iproc.c                   |  6 +-
 .../broadcom/brcm80211/brcmfmac/firmware.c         | 35 +++++------
 .../broadcom/brcm80211/brcmfmac/firmware.h         |  4 +-
 .../wireless/broadcom/brcm80211/brcmfmac/pcie.c    | 17 +++--
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 18 ++++--
 .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c |  9 +--
 drivers/net/wireless/ralink/rt2x00/rt2x00dev.c     | 23 +++----
 drivers/net/wireless/ralink/rt2x00/rt2x00usb.c     |  5 ++
 drivers/of/fdt.c                                   |  9 ++-
 drivers/spi/spi.c                                  |  2 +-
 drivers/target/iscsi/iscsi_target.c                | 22 ++++++-
 drivers/target/target_core_internal.h              |  2 +-
 drivers/target/target_core_tmr.c                   | 16 ++---
 drivers/target/target_core_transport.c             |  9 ++-
 drivers/usb/gadget/function/f_fs.c                 | 10 +--
 fs/autofs4/dev-ioctl.c                             |  2 +-
 fs/cifs/smb1ops.c                                  |  9 ++-
 fs/cifs/smb2ops.c                                  |  4 +-
 fs/exec.c                                          | 28 +++++++--
 include/linux/timekeeper_internal.h                |  5 +-
 kernel/signal.c                                    | 20 ++++--
 kernel/time/timekeeping.c                          | 72 ++++++++++++++--------
 lib/cmdline.c                                      |  6 +-
 net/rxrpc/key.c                                    | 64 ++++++++++---------
 sound/core/pcm_lib.c                               |  4 +-
 sound/firewire/amdtp-stream.c                      |  8 ++-
 sound/firewire/amdtp-stream.h                      |  2 +-
 51 files changed, 396 insertions(+), 229 deletions(-)

[PATCH 4.9 01/44] clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@csie.org>

commit 38b8f823864707eb1cf331d2247608c419ed388c upstream.

The register offset for the lcd1-ch1 clock was incorrectly pointing to
the lcd0-ch1 clock. This resulted in the lcd0-ch1 clock being disabled
when the clk core disables unused clocks. This then stops the simplefb
HDMI output path.

Reported-by: Bob Ham <rah@settrans.net>
Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -556,7 +556,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(lcd0_ch
 				 0x12c, 0, 4, 24, 3, BIT(31),
 				 CLK_SET_RATE_PARENT);
 static SUNXI_CCU_M_WITH_MUX_GATE(lcd1_ch1_clk, "lcd1-ch1", lcd_ch1_parents,
-				 0x12c, 0, 4, 24, 3, BIT(31),
+				 0x130, 0, 4, 24, 3, BIT(31),
 				 CLK_SET_RATE_PARENT);
 
 static const char * const csi_sclk_parents[] = { "pll-video0", "pll-video1",

[PATCH 4.9 03/44] xen-blkback: dont leak stack data via response ring

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <jbeulich@suse.com>

commit 089bc0143f489bd3a4578bdff5f4ca68fb26f341 upstream.

Rather than constructing a local structure instance on the stack, fill
the fields directly on the shared ring, just like other backends do.
Build on the fact that all response structure flavors are actually
identical (the old code did make this assumption too).

This is XSA-216.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkback/blkback.c |   23 ++++++++++++-----------
 drivers/block/xen-blkback/common.h  |   25 +++++--------------------
 2 files changed, 17 insertions(+), 31 deletions(-)

--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -1436,34 +1436,35 @@ static int dispatch_rw_block_io(struct x
 static void make_response(struct xen_blkif_ring *ring, u64 id,
 			  unsigned short op, int st)
 {
-	struct blkif_response  resp;
+	struct blkif_response *resp;
 	unsigned long     flags;
 	union blkif_back_rings *blk_rings;
 	int notify;
 
-	resp.id        = id;
-	resp.operation = op;
-	resp.status    = st;
-
 	spin_lock_irqsave(&ring->blk_ring_lock, flags);
 	blk_rings = &ring->blk_rings;
 	/* Place on the response ring for the relevant domain. */
 	switch (ring->blkif->blk_protocol) {
 	case BLKIF_PROTOCOL_NATIVE:
-		memcpy(RING_GET_RESPONSE(&blk_rings->native, blk_rings->native.rsp_prod_pvt),
-		       &resp, sizeof(resp));
+		resp = RING_GET_RESPONSE(&blk_rings->native,
+					 blk_rings->native.rsp_prod_pvt);
 		break;
 	case BLKIF_PROTOCOL_X86_32:
-		memcpy(RING_GET_RESPONSE(&blk_rings->x86_32, blk_rings->x86_32.rsp_prod_pvt),
-		       &resp, sizeof(resp));
+		resp = RING_GET_RESPONSE(&blk_rings->x86_32,
+					 blk_rings->x86_32.rsp_prod_pvt);
 		break;
 	case BLKIF_PROTOCOL_X86_64:
-		memcpy(RING_GET_RESPONSE(&blk_rings->x86_64, blk_rings->x86_64.rsp_prod_pvt),
-		       &resp, sizeof(resp));
+		resp = RING_GET_RESPONSE(&blk_rings->x86_64,
+					 blk_rings->x86_64.rsp_prod_pvt);
 		break;
 	default:
 		BUG();
 	}
+
+	resp->id        = id;
+	resp->operation = op;
+	resp->status    = st;
+
 	blk_rings->common.rsp_prod_pvt++;
 	RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(&blk_rings->common, notify);
 	spin_unlock_irqrestore(&ring->blk_ring_lock, flags);
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -75,9 +75,8 @@ extern unsigned int xenblk_max_queues;
 struct blkif_common_request {
 	char dummy;
 };
-struct blkif_common_response {
-	char dummy;
-};
+
+/* i386 protocol version */
 
 struct blkif_x86_32_request_rw {
 	uint8_t        nr_segments;  /* number of segments                   */
@@ -129,14 +128,6 @@ struct blkif_x86_32_request {
 	} u;
 } __attribute__((__packed__));
 
-/* i386 protocol version */
-#pragma pack(push, 4)
-struct blkif_x86_32_response {
-	uint64_t        id;              /* copied from request */
-	uint8_t         operation;       /* copied from request */
-	int16_t         status;          /* BLKIF_RSP_???       */
-};
-#pragma pack(pop)
 /* x86_64 protocol version */
 
 struct blkif_x86_64_request_rw {
@@ -193,18 +184,12 @@ struct blkif_x86_64_request {
 	} u;
 } __attribute__((__packed__));
 
-struct blkif_x86_64_response {
-	uint64_t       __attribute__((__aligned__(8))) id;
-	uint8_t         operation;       /* copied from request */
-	int16_t         status;          /* BLKIF_RSP_???       */
-};
-
 DEFINE_RING_TYPES(blkif_common, struct blkif_common_request,
-		  struct blkif_common_response);
+		  struct blkif_response);
 DEFINE_RING_TYPES(blkif_x86_32, struct blkif_x86_32_request,
-		  struct blkif_x86_32_response);
+		  struct blkif_response __packed);
 DEFINE_RING_TYPES(blkif_x86_64, struct blkif_x86_64_request,
-		  struct blkif_x86_64_response);
+		  struct blkif_response);
 
 union blkif_back_rings {
 	struct blkif_back_ring        native;

[PATCH 4.9 04/44] ALSA: firewire-lib: Fix stall of process context at packet error

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 4a9bfafc64f44ef83de4e00ca1b57352af6cd8c2 upstream.

At Linux v3.5, packet processing can be done in process context of ALSA
PCM application as well as software IRQ context for OHCI 1394. Below is
an example of the callgraph (some calls are omitted).

ioctl(2) with e.g. HWSYNC
(sound/core/pcm_native.c)
->snd_pcm_common_ioctl1()
  ->snd_pcm_hwsync()
    ->snd_pcm_stream_lock_irq
    (sound/core/pcm_lib.c)
    ->snd_pcm_update_hw_ptr()
      ->snd_pcm_udpate_hw_ptr0()
        ->struct snd_pcm_ops.pointer()
        (sound/firewire/*)
        = Each handler on drivers in ALSA firewire stack
          (sound/firewire/amdtp-stream.c)
          ->amdtp_stream_pcm_pointer()
            (drivers/firewire/core-iso.c)
            ->fw_iso_context_flush_completions()
              ->struct fw_card_driver.flush_iso_completion()
              (drivers/firewire/ohci.c)
              = flush_iso_completions()
                ->struct fw_iso_context.callback.sc
                (sound/firewire/amdtp-stream.c)
                = in_stream_callback() or out_stream_callback()
                  ->...
    ->snd_pcm_stream_unlock_irq

When packet queueing error occurs or detecting invalid packets in
'in_stream_callback()' or 'out_stream_callback()', 'snd_pcm_stop_xrun()'
is called on local CPU with disabled IRQ.

(sound/firewire/amdtp-stream.c)
in_stream_callback() or out_stream_callback()
->amdtp_stream_pcm_abort()
  ->snd_pcm_stop_xrun()
    ->snd_pcm_stream_lock_irqsave()
    ->snd_pcm_stop()
    ->snd_pcm_stream_unlock_irqrestore()

The process is stalled on the CPU due to attempt to acquire recursive lock.

[  562.630853] INFO: rcu_sched detected stalls on CPUs/tasks:
[  562.630861]      2-...: (1 GPs behind) idle=37d/140000000000000/0 softirq=38323/38323 fqs=7140
[  562.630862]      (detected by 3, t=15002 jiffies, g=21036, c=21035, q=5933)
[  562.630866] Task dump for CPU 2:
[  562.630867] alsa-source-OXF R  running task        0  6619      1 0x00000008
[  562.630870] Call Trace:
[  562.630876]  ? vt_console_print+0x79/0x3e0
[  562.630880]  ? msg_print_text+0x9d/0x100
[  562.630883]  ? up+0x32/0x50
[  562.630885]  ? irq_work_queue+0x8d/0xa0
[  562.630886]  ? console_unlock+0x2b6/0x4b0
[  562.630888]  ? vprintk_emit+0x312/0x4a0
[  562.630892]  ? dev_vprintk_emit+0xbf/0x230
[  562.630895]  ? do_sys_poll+0x37a/0x550
[  562.630897]  ? dev_printk_emit+0x4e/0x70
[  562.630900]  ? __dev_printk+0x3c/0x80
[  562.630903]  ? _raw_spin_lock+0x20/0x30
[  562.630909]  ? snd_pcm_stream_lock+0x31/0x50 [snd_pcm]
[  562.630914]  ? _snd_pcm_stream_lock_irqsave+0x2e/0x40 [snd_pcm]
[  562.630918]  ? snd_pcm_stop_xrun+0x16/0x70 [snd_pcm]
[  562.630922]  ? in_stream_callback+0x3e6/0x450 [snd_firewire_lib]
[  562.630925]  ? handle_ir_packet_per_buffer+0x8e/0x1a0 [firewire_ohci]
[  562.630928]  ? ohci_flush_iso_completions+0xa3/0x130 [firewire_ohci]
[  562.630932]  ? fw_iso_context_flush_completions+0x15/0x20 [firewire_core]
[  562.630935]  ? amdtp_stream_pcm_pointer+0x2d/0x40 [snd_firewire_lib]
[  562.630938]  ? pcm_capture_pointer+0x19/0x20 [snd_oxfw]
[  562.630943]  ? snd_pcm_update_hw_ptr0+0x47/0x3d0 [snd_pcm]
[  562.630945]  ? poll_select_copy_remaining+0x150/0x150
[  562.630947]  ? poll_select_copy_remaining+0x150/0x150
[  562.630952]  ? snd_pcm_update_hw_ptr+0x10/0x20 [snd_pcm]
[  562.630956]  ? snd_pcm_hwsync+0x45/0xb0 [snd_pcm]
[  562.630960]  ? snd_pcm_common_ioctl1+0x1ff/0xc90 [snd_pcm]
[  562.630962]  ? futex_wake+0x90/0x170
[  562.630966]  ? snd_pcm_capture_ioctl1+0x136/0x260 [snd_pcm]
[  562.630970]  ? snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm]
[  562.630972]  ? do_vfs_ioctl+0xa3/0x610
[  562.630974]  ? vfs_read+0x11b/0x130
[  562.630976]  ? SyS_ioctl+0x79/0x90
[  562.630978]  ? entry_SYSCALL_64_fastpath+0x1e/0xad

This commit fixes the above bug. This assumes two cases:
1. Any error is detected in software IRQ context of OHCI 1394 context.
In this case, PCM substream should be aborted in packet handler. On the
other hand, it should not be done in any process context. TO distinguish
these two context, use 'in_interrupt()' macro.
2. Any error is detect in process context of ALSA PCM application.
In this case, PCM substream should not be aborted in packet handler
because PCM substream lock is acquired. The task to abort PCM substream
should be done in ALSA PCM core. For this purpose, SNDRV_PCM_POS_XRUN is
returned at 'struct snd_pcm_ops.pointer()'.

Suggested-by: Clemens Ladisch <clemens@ladisch.de>
Fixes: e9148dddc3c7("ALSA: firewire-lib: flush completed packets when reading PCM position")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/amdtp-stream.c |    8 ++++++--
 sound/firewire/amdtp-stream.h |    2 +-
 2 files changed, 7 insertions(+), 3 deletions(-)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -606,7 +606,9 @@ static void out_stream_callback(struct f
 		cycle = increment_cycle_count(cycle, 1);
 		if (handle_out_packet(s, cycle, i) < 0) {
 			s->packet_index = -1;
-			amdtp_stream_pcm_abort(s);
+			if (in_interrupt())
+				amdtp_stream_pcm_abort(s);
+			WRITE_ONCE(s->pcm_buffer_pointer, SNDRV_PCM_POS_XRUN);
 			return;
 		}
 	}
@@ -658,7 +660,9 @@ static void in_stream_callback(struct fw
 	/* Queueing error or detecting invalid payload. */
 	if (i < packets) {
 		s->packet_index = -1;
-		amdtp_stream_pcm_abort(s);
+		if (in_interrupt())
+			amdtp_stream_pcm_abort(s);
+		WRITE_ONCE(s->pcm_buffer_pointer, SNDRV_PCM_POS_XRUN);
 		return;
 	}
 
--- a/sound/firewire/amdtp-stream.h
+++ b/sound/firewire/amdtp-stream.h
@@ -124,7 +124,7 @@ struct amdtp_stream {
 	/* For a PCM substream processing. */
 	struct snd_pcm_substream *pcm;
 	struct tasklet_struct period_tasklet;
-	unsigned int pcm_buffer_pointer;
+	snd_pcm_uframes_t pcm_buffer_pointer;
 	unsigned int pcm_period_pointer;
 
 	/* To wait for first packet. */

[PATCH 4.9 05/44] ALSA: pcm: Dont treat NULL chmap as a fatal error

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 2deaeaf102d692cb6f764123b1df7aa118a8e97c upstream.

The standard PCM chmap helper callbacks treat the NULL info->chmap as
a fatal error and spews the kernel warning with stack trace when
CONFIG_SND_DEBUG is on.  This was OK, originally it was supposed to be
always static and non-NULL.  But, as the recent addition of Intel LPE
audio driver shows, the chmap content may vary dynamically, and it can
be even NULL when disconnected.  The user still sees the kernel
warning unnecessarily.

For clearing such a confusion, this patch simply removes the
snd_BUG_ON() in each place, just returns an error without warning.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/pcm_lib.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -2491,7 +2491,7 @@ static int pcm_chmap_ctl_get(struct snd_
 	struct snd_pcm_substream *substream;
 	const struct snd_pcm_chmap_elem *map;
 
-	if (snd_BUG_ON(!info->chmap))
+	if (!info->chmap)
 		return -EINVAL;
 	substream = snd_pcm_chmap_substream(info, idx);
 	if (!substream)
@@ -2523,7 +2523,7 @@ static int pcm_chmap_ctl_tlv(struct snd_
 	unsigned int __user *dst;
 	int c, count = 0;
 
-	if (snd_BUG_ON(!info->chmap))
+	if (!info->chmap)
 		return -EINVAL;
 	if (size < 8)
 		return -ENOMEM;

[PATCH 4.9 06/44] fs/exec.c: account for argv/envp pointers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 98da7d08850fb8bdeb395d6368ed15753304aa0c upstream.

When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included.  This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.

For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).

The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely.  Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).

[akpm@linux-foundation.org: additional commenting from Kees]
Fixes: b6a2fea39318 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c |   28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -215,8 +215,26 @@ static struct page *get_arg_page(struct
 
 	if (write) {
 		unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
+		unsigned long ptr_size;
 		struct rlimit *rlim;
 
+		/*
+		 * Since the stack will hold pointers to the strings, we
+		 * must account for them as well.
+		 *
+		 * The size calculation is the entire vma while each arg page is
+		 * built, so each time we get here it's calculating how far it
+		 * is currently (rather than each call being just the newly
+		 * added size from the arg page).  As a result, we need to
+		 * always add the entire size of the pointers, so that on the
+		 * last call to get_arg_page() we'll actually have the entire
+		 * correct size.
+		 */
+		ptr_size = (bprm->argc + bprm->envc) * sizeof(void *);
+		if (ptr_size > ULONG_MAX - size)
+			goto fail;
+		size += ptr_size;
+
 		acct_arg_size(bprm, size / PAGE_SIZE);
 
 		/*
@@ -234,13 +252,15 @@ static struct page *get_arg_page(struct
 		 *    to work from.
 		 */
 		rlim = current->signal->rlim;
-		if (size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4) {
-			put_page(page);
-			return NULL;
-		}
+		if (size > READ_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4)
+			goto fail;
 	}
 
 	return page;
+
+fail:
+	put_page(page);
+	return NULL;
 }
 
 static void put_arg_page(struct page *page)

[PATCH 4.9 07/44] powerpc/perf: Fix oops when kthread execs user process

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>

commit bf05fc25f268cd62f147f368fe65ad3e5b04fe9f upstream.

When a kthread calls call_usermodehelper() the steps are:
  1. allocate current->mm
  2. load_elf_binary()
  3. populate current->thread.regs

While doing this, interrupts are not disabled. If there is a perf
interrupt in the middle of this process (i.e. step 1 has completed
but not yet reached to step 3) and if perf tries to read userspace
regs, kernel oops with following log:

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc0000000000da0fc
  ...
  Call Trace:
  perf_output_sample_regs+0x6c/0xd0
  perf_output_sample+0x4e4/0x830
  perf_event_output_forward+0x64/0x90
  __perf_event_overflow+0x8c/0x1e0
  record_and_restart+0x220/0x5c0
  perf_event_interrupt+0x2d8/0x4d0
  performance_monitor_exception+0x54/0x70
  performance_monitor_common+0x158/0x160
  --- interrupt: f01 at avtab_search_node+0x150/0x1a0
      LR = avtab_search_node+0x100/0x1a0
  ...
  load_elf_binary+0x6e8/0x15a0
  search_binary_handler+0xe8/0x290
  do_execveat_common.isra.14+0x5f4/0x840
  call_usermodehelper_exec_async+0x170/0x210
  ret_from_kernel_thread+0x5c/0x7c

Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace
pt_regs are not set.

Fixes: ed4a4ef85cf5 ("powerpc/perf: Add support for sampling interrupt register state")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/perf/perf_regs.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/perf/perf_regs.c
+++ b/arch/powerpc/perf/perf_regs.c
@@ -100,5 +100,6 @@ void perf_get_regs_user(struct perf_regs
 			struct pt_regs *regs_user_copy)
 {
 	regs_user->regs = task_pt_regs(current);
-	regs_user->abi  = perf_reg_abi(current);
+	regs_user->abi = (regs_user->regs) ? perf_reg_abi(current) :
+			 PERF_SAMPLE_REGS_ABI_NONE;
 }

[PATCH 4.9 08/44] autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

commit 9fa4eb8e490a28de40964b1b0e583d8db4c7e57c upstream.

If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return

   ERR_PTR(status)

with that status to follow_automount(), which will then dereference an
invalid pointer.

So treat a positive status the same as zero, and map to ENOENT.

See comment in systemd src/core/automount.c::automount_send_ready().

Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/autofs4/dev-ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -345,7 +345,7 @@ static int autofs_dev_ioctl_fail(struct
 	int status;
 
 	token = (autofs_wqt_t) param->fail.token;
-	status = param->fail.status ? param->fail.status : -ENOENT;
+	status = param->fail.status < 0 ? param->fail.status : -ENOENT;
 	return autofs4_wait_release(sbi, token, status);
 }
 

[PATCH 4.9 09/44] lib/cmdline.c: fix get_options() overflow while parsing ranges

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Matveychikov <matvejchikov@gmail.com>

commit a91e0f680bcd9e10c253ae8b62462a38bd48f09f upstream.

When using get_options() it's possible to specify a range of numbers,
like 1-100500.  The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.

Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/cmdline.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/lib/cmdline.c
+++ b/lib/cmdline.c
@@ -22,14 +22,14 @@
  *	the values[M, M+1, ..., N] into the ints array in get_options.
  */
 
-static int get_range(char **str, int *pint)
+static int get_range(char **str, int *pint, int n)
 {
 	int x, inc_counter, upper_range;
 
 	(*str)++;
 	upper_range = simple_strtol((*str), NULL, 0);
 	inc_counter = upper_range - *pint;
-	for (x = *pint; x < upper_range; x++)
+	for (x = *pint; n && x < upper_range; x++, n--)
 		*pint++ = x;
 	return inc_counter;
 }
@@ -96,7 +96,7 @@ char *get_options(const char *str, int n
 			break;
 		if (res == 3) {
 			int range_nums;
-			range_nums = get_range((char **)&str, ints + i);
+			range_nums = get_range((char **)&str, ints + i, nints - i);
 			if (range_nums < 0)
 				break;
 			/*

[PATCH 4.9 10/44] perf/x86/intel: Add 1G DTLB load/store miss support for SKL

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kan Liang <Kan.liang@intel.com>

commit fb3a5055cd7098f8d1dd0cd38d7172211113255f upstream.

Current DTLB load/store miss events (0x608/0x649) only counts 4K,2M and
4M page size.
Need to extend the events to support any page size (4K/2M/4M/1G).

The complete DTLB load/store miss events are:

  DTLB_LOAD_MISSES.WALK_COMPLETED		0xe08
  DTLB_STORE_MISSES.WALK_COMPLETED		0xe49

Signed-off-by: Kan Liang <Kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20170619142609.11058-1-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/events/intel/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -431,11 +431,11 @@ static __initconst const u64 skl_hw_cach
  [ C(DTLB) ] = {
 	[ C(OP_READ) ] = {
 		[ C(RESULT_ACCESS) ] = 0x81d0,	/* MEM_INST_RETIRED.ALL_LOADS */
-		[ C(RESULT_MISS)   ] = 0x608,	/* DTLB_LOAD_MISSES.WALK_COMPLETED */
+		[ C(RESULT_MISS)   ] = 0xe08,	/* DTLB_LOAD_MISSES.WALK_COMPLETED */
 	},
 	[ C(OP_WRITE) ] = {
 		[ C(RESULT_ACCESS) ] = 0x82d0,	/* MEM_INST_RETIRED.ALL_STORES */
-		[ C(RESULT_MISS)   ] = 0x649,	/* DTLB_STORE_MISSES.WALK_COMPLETED */
+		[ C(RESULT_MISS)   ] = 0xe49,	/* DTLB_STORE_MISSES.WALK_COMPLETED */
 	},
 	[ C(OP_PREFETCH) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0,

[PATCH 4.9 11/44] KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit addb63c18a0d52a9ce2611d039f981f7b6148d2b upstream.

For real-space designation asces the asce origin part is only a token.
The asce token origin must not be used to generate an effective
address for storage references. This however is erroneously done
within kvm_s390_shadow_tables().

Furthermore within the same function the wrong parts of virtual
addresses are used to generate a corresponding real address
(e.g. the region second index is used as region first index).

Both of the above can result in incorrect address translations. Only
for real space designations with a token origin of zero and addresses
below one megabyte the translation was correct.

Furthermore replace a "!asce.r" statement with a "!*fake" statement to
make it more obvious that a specific condition has nothing to do with
the architecture, but with the fake handling of real space designations.

Fixes: 3218f7094b6b ("s390/mm: support real-space for gmap shadows")
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kvm/gaccess.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

--- a/arch/s390/kvm/gaccess.c
+++ b/arch/s390/kvm/gaccess.c
@@ -972,11 +972,12 @@ static int kvm_s390_shadow_tables(struct
 	ptr = asce.origin * 4096;
 	if (asce.r) {
 		*fake = 1;
+		ptr = 0;
 		asce.dt = ASCE_TYPE_REGION1;
 	}
 	switch (asce.dt) {
 	case ASCE_TYPE_REGION1:
-		if (vaddr.rfx01 > asce.tl && !asce.r)
+		if (vaddr.rfx01 > asce.tl && !*fake)
 			return PGM_REGION_FIRST_TRANS;
 		break;
 	case ASCE_TYPE_REGION2:
@@ -1004,8 +1005,7 @@ static int kvm_s390_shadow_tables(struct
 		union region1_table_entry rfte;
 
 		if (*fake) {
-			/* offset in 16EB guest memory block */
-			ptr = ptr + ((unsigned long) vaddr.rsx << 53UL);
+			ptr += (unsigned long) vaddr.rfx << 53;
 			rfte.val = ptr;
 			goto shadow_r2t;
 		}
@@ -1031,8 +1031,7 @@ shadow_r2t:
 		union region2_table_entry rste;
 
 		if (*fake) {
-			/* offset in 8PB guest memory block */
-			ptr = ptr + ((unsigned long) vaddr.rtx << 42UL);
+			ptr += (unsigned long) vaddr.rsx << 42;
 			rste.val = ptr;
 			goto shadow_r3t;
 		}
@@ -1059,8 +1058,7 @@ shadow_r3t:
 		union region3_table_entry rtte;
 
 		if (*fake) {
-			/* offset in 4TB guest memory block */
-			ptr = ptr + ((unsigned long) vaddr.sx << 31UL);
+			ptr += (unsigned long) vaddr.rtx << 31;
 			rtte.val = ptr;
 			goto shadow_sgt;
 		}
@@ -1096,8 +1094,7 @@ shadow_sgt:
 		union segment_table_entry ste;
 
 		if (*fake) {
-			/* offset in 2G guest memory block */
-			ptr = ptr + ((unsigned long) vaddr.sx << 20UL);
+			ptr += (unsigned long) vaddr.sx << 20;
 			ste.val = ptr;
 			goto shadow_pgt;
 		}

[PATCH 4.9 12/44] KVM: PPC: Book3S HV: Preserve userspace HTM state properly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@ozlabs.org>

commit 46a704f8409f79fd66567ad3f8a7304830a84293 upstream.

If userspace attempts to call the KVM_RUN ioctl when it has hardware
transactional memory (HTM) enabled, the values that it has put in the
HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by
guest values.  To fix this, we detect this condition and save those
SPR values in the thread struct, and disable HTM for the task.  If
userspace goes to access those SPRs or the HTM facility in future,
a TM-unavailable interrupt will occur and the handler will reload
those SPRs and re-enable HTM.

If userspace has started a transaction and suspended it, we would
currently lose the transactional state in the guest entry path and
would almost certainly get a "TM Bad Thing" interrupt, which would
cause the host to crash.  To avoid this, we detect this case and
return from the KVM_RUN ioctl with an EINVAL error, with the KVM
exit reason set to KVM_EXIT_FAIL_ENTRY.

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2813,6 +2813,27 @@ static int kvmppc_vcpu_run_hv(struct kvm
 		return -EINVAL;
 	}
 
+	/*
+	 * Don't allow entry with a suspended transaction, because
+	 * the guest entry/exit code will lose it.
+	 * If the guest has TM enabled, save away their TM-related SPRs
+	 * (they will get restored by the TM unavailable interrupt).
+	 */
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	if (cpu_has_feature(CPU_FTR_TM) && current->thread.regs &&
+	    (current->thread.regs->msr & MSR_TM)) {
+		if (MSR_TM_ACTIVE(current->thread.regs->msr)) {
+			run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+			run->fail_entry.hardware_entry_failure_reason = 0;
+			return -EINVAL;
+		}
+		current->thread.tm_tfhar = mfspr(SPRN_TFHAR);
+		current->thread.tm_tfiar = mfspr(SPRN_TFIAR);
+		current->thread.tm_texasr = mfspr(SPRN_TEXASR);
+		current->thread.regs->msr &= ~MSR_TM;
+	}
+#endif
+
 	kvmppc_core_prepare_to_enter(vcpu);
 
 	/* No need to go into the guest when all we'll do is come back out */

[PATCH 4.9 13/44] KVM: PPC: Book3S HV: Context-switch EBB registers properly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@ozlabs.org>

commit ca8efa1df1d15a1795a2da57f9f6aada6ed6b946 upstream.

This adds code to save the values of three SPRs (special-purpose
registers) used by userspace to control event-based branches (EBBs),
which are essentially interrupts that get delivered directly to
userspace.  These registers are loaded up with guest values when
entering the guest, and their values are saved when exiting the
guest, but we were not saving the host values and restoring them
before going back to userspace.

On POWER8 this would only affect userspace programs which explicitly
request the use of EBBs and also use the KVM_RUN ioctl, since the
only source of EBBs on POWER8 is the PMU, and there is an explicit
enable bit in the PMU registers (and those PMU registers do get
properly context-switched between host and guest).  On POWER9 there
is provision for externally-generated EBBs, and these are not subject
to the control in the PMU registers.

Since these registers only affect userspace, we can save them when
we first come in from userspace and restore them before returning to
userspace, rather than saving/restoring the host values on every
guest entry/exit.  Similarly, we don't need to worry about their
values on offline secondary threads since they execute in the context
of the idle task, which never executes in userspace.

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2807,6 +2807,7 @@ static int kvmppc_vcpu_run_hv(struct kvm
 {
 	int r;
 	int srcu_idx;
+	unsigned long ebb_regs[3] = {};	/* shut up GCC */
 
 	if (!vcpu->arch.sane) {
 		run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
@@ -2855,6 +2856,13 @@ static int kvmppc_vcpu_run_hv(struct kvm
 
 	flush_all_to_thread(current);
 
+	/* Save userspace EBB register values */
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		ebb_regs[0] = mfspr(SPRN_EBBHR);
+		ebb_regs[1] = mfspr(SPRN_EBBRR);
+		ebb_regs[2] = mfspr(SPRN_BESCR);
+	}
+
 	vcpu->arch.wqp = &vcpu->arch.vcore->wq;
 	vcpu->arch.pgdir = current->mm->pgd;
 	vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
@@ -2877,6 +2885,13 @@ static int kvmppc_vcpu_run_hv(struct kvm
 			r = kvmppc_xics_rm_complete(vcpu, 0);
 	} while (is_kvmppc_resume_guest(r));
 
+	/* Restore userspace EBB register values */
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		mtspr(SPRN_EBBHR, ebb_regs[0]);
+		mtspr(SPRN_EBBRR, ebb_regs[1]);
+		mtspr(SPRN_BESCR, ebb_regs[2]);
+	}
+
  out:
 	vcpu->arch.state = KVMPPC_VCPU_NOTREADY;
 	atomic_dec(&vcpu->kvm->arch.vcpus_running);

[PATCH 4.9 14/44] CIFS: Improve readdir verbosity

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit dcd87838c06f05ab7650b249ebf0d5b57ae63e1e upstream.

Downgrade the loglevel for SMB2 to prevent filling the log
with messages if e.g. readdir was interrupted. Also make SMB2
and SMB1 codepaths do the same logging during readdir.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb1ops.c |    9 +++++++--
 fs/cifs/smb2ops.c |    4 ++--
 2 files changed, 9 insertions(+), 4 deletions(-)

--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -849,8 +849,13 @@ cifs_query_dir_first(const unsigned int
 		     struct cifs_fid *fid, __u16 search_flags,
 		     struct cifs_search_info *srch_inf)
 {
-	return CIFSFindFirst(xid, tcon, path, cifs_sb,
-			     &fid->netfid, search_flags, srch_inf, true);
+	int rc;
+
+	rc = CIFSFindFirst(xid, tcon, path, cifs_sb,
+			   &fid->netfid, search_flags, srch_inf, true);
+	if (rc)
+		cifs_dbg(FYI, "find first failed=%d\n", rc);
+	return rc;
 }
 
 static int
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -964,7 +964,7 @@ smb2_query_dir_first(const unsigned int
 	rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL);
 	kfree(utf16_path);
 	if (rc) {
-		cifs_dbg(VFS, "open dir failed\n");
+		cifs_dbg(FYI, "open dir failed rc=%d\n", rc);
 		return rc;
 	}
 
@@ -974,7 +974,7 @@ smb2_query_dir_first(const unsigned int
 	rc = SMB2_query_directory(xid, tcon, fid->persistent_fid,
 				  fid->volatile_fid, 0, srch_inf);
 	if (rc) {
-		cifs_dbg(VFS, "query directory failed\n");
+		cifs_dbg(FYI, "query directory failed rc=%d\n", rc);
 		SMB2_close(xid, tcon, fid->persistent_fid, fid->volatile_fid);
 	}
 	return rc;

[PATCH 4.9 15/44] cxgb4: notify uP to route ctrlq compl to rdma rspq

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raju Rangoju <rajur@chelsio.com>

commit dec6b33163d24e2c19ba521c89fffbaab53ae986 upstream.

During the module initialisation there is a possible race
(basically race between uld and lld) where neither the uld
nor lld notifies the uP about where to route the ctrl queue
completions. LLD skips notifying uP as the rdma queues were
not created by then (will leave it to ULD to notify the uP).
As the ULD comes up, it also skips notifying the uP as the
flag FULL_INIT_DONE is not set yet (ULD assumes that the
interface is not up yet).

Consequently, this race between uld and lld leaves uP
unnotified about where to send the ctrl queue completions
to, leading to iwarp RI_RES WR failure.

Here is the race:

CPU 0                                   CPU1

- allocates nic rx queus
- t4_sge_alloc_ctrl_txq()
(if rdma rsp queues exists,
tell uP to route ctrl queue
compl to rdma rspq)
                                - acquires the mutex_lock
                                - allocates rdma response queues
                                - if FULL_INIT_DONE set,
                                  tell uP to route ctrl queue compl
                                  to rdma rspq
                                - relinquishes mutex_lock
- acquires the mutex_lock
- enable_rx()
- set FULL_INIT_DONE
- relinquishes mutex_lock

This patch fixes the above issue.

Fixes: e7519f9926f1('cxgb4: avoid enabling napi twice to the same queue')
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -2201,9 +2201,10 @@ static int cxgb_up(struct adapter *adap)
 {
 	int err;
 
+	mutex_lock(&uld_mutex);
 	err = setup_sge_queues(adap);
 	if (err)
-		goto out;
+		goto rel_lock;
 	err = setup_rss(adap);
 	if (err)
 		goto freeq;
@@ -2227,7 +2228,6 @@ static int cxgb_up(struct adapter *adap)
 			goto irq_err;
 	}
 
-	mutex_lock(&uld_mutex);
 	enable_rx(adap);
 	t4_sge_start(adap);
 	t4_intr_enable(adap);
@@ -2240,13 +2240,15 @@ static int cxgb_up(struct adapter *adap)
 #endif
 	/* Initialize hash mac addr list*/
 	INIT_LIST_HEAD(&adap->mac_hlist);
- out:
 	return err;
+
  irq_err:
 	dev_err(adap->pdev_dev, "request_irq failed, err %d\n", err);
  freeq:
 	t4_free_sge_resources(adap);
-	goto out;
+ rel_lock:
+	mutex_unlock(&uld_mutex);
+	return err;
 }
 
 static void cxgb_down(struct adapter *adapter)

[PATCH 4.9 16/44] HID: Add quirk for Dell PIXART OEM mouse

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Parschauer <sparschauer@suse.de>

commit 3db28271f0feae129262d30e41384a7c4c767987 upstream.

This mouse is also known under other IDs. It needs the quirk
ALWAYS_POLL or will disconnect in runlevel 1 or 3.

Signed-off-by: Sebastian Parschauer <sparschauer@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-ids.h           |    3 +++
 drivers/hid/usbhid/hid-quirks.c |    1 +
 2 files changed, 4 insertions(+)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -311,6 +311,9 @@
 #define USB_VENDOR_ID_DELCOM		0x0fc5
 #define USB_DEVICE_ID_DELCOM_VISUAL_IND	0xb080
 
+#define USB_VENDOR_ID_DELL				0x413c
+#define USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE	0x301a
+
 #define USB_VENDOR_ID_DELORME		0x1163
 #define USB_DEVICE_ID_DELORME_EARTHMATE	0x0100
 #define USB_DEVICE_ID_DELORME_EM_LT20	0x0200
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -81,6 +81,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_K65RGB, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_CORSAIR, USB_DEVICE_ID_CORSAIR_STRAFE, HID_QUIRK_NO_INIT_REPORTS | HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT },

[PATCH 4.9 17/44] signal: Only reschedule timers on signals timers have sent

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit 57db7e4a2d92c2d3dfbca4ef8057849b2682436b upstream.

Thomas Gleixner  wrote:
> The CRIU support added a 'feature' which allows a user space task to send
> arbitrary (kernel) signals to itself. The changelog says:
>
>   The kernel prevents sending of siginfo with positive si_code, because
>   these codes are reserved for kernel.  I think we can allow a task to
>   send such a siginfo to itself.  This operation should not be dangerous.
>
> Quite contrary to that claim, it turns out that it is outright dangerous
> for signals with info->si_code == SI_TIMER. The following code sequence in
> a user space task allows to crash the kernel:
>
>    id = timer_create(CLOCK_XXX, ..... signo = SIGX);
>    timer_set(id, ....);
>    info->si_signo = SIGX;
>    info->si_code = SI_TIMER:
>    info->_sifields._timer._tid = id;
>    info->_sifields._timer._sys_private = 2;
>    rt_[tg]sigqueueinfo(..., SIGX, info);
>    sigemptyset(&sigset);
>    sigaddset(&sigset, SIGX);
>    rt_sigtimedwait(sigset, info);
>
> For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this
> results in a kernel crash because sigwait() dequeues the signal and the
> dequeue code observes:
>
>   info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0
>
> which triggers the following callchain:
>
>  do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer()
>
> arm_timer() executes a list_add() on the timer, which is already armed via
> the timer_set() syscall. That's a double list add which corrupts the posix
> cpu timer list. As a consequence the kernel crashes on the next operation
> touching the posix cpu timer list.
>
> Posix clocks which are internally implemented based on hrtimers are not
> affected by this because hrtimer_start() can handle already armed timers
> nicely, but it's a reliable way to trigger the WARN_ON() in
> hrtimer_forward(), which complains about calling that function on an
> already armed timer.

This problem has existed since the posix timer code was merged into
2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to
inject not just a signal (which linux has supported since 1.0) but the
full siginfo of a signal.

The core problem is that the code will reschedule in response to
signals getting dequeued not just for signals the timers sent but
for other signals that happen to a si_code of SI_TIMER.

Avoid this confusion by testing to see if the queued signal was
preallocated as all timer signals are preallocated, and so far
only the timer code preallocates signals.

Move the check for if a timer needs to be rescheduled up into
collect_signal where the preallocation check must be performed,
and pass the result back to dequeue_signal where the code reschedules
timers.   This makes it clear why the code cares about preallocated
timers.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself")
Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO")
Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/signal.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -503,7 +503,8 @@ int unhandled_signal(struct task_struct
 	return !tsk->ptrace;
 }
 
-static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+static void collect_signal(int sig, struct sigpending *list, siginfo_t *info,
+			   bool *resched_timer)
 {
 	struct sigqueue *q, *first = NULL;
 
@@ -525,6 +526,12 @@ static void collect_signal(int sig, stru
 still_pending:
 		list_del_init(&first->list);
 		copy_siginfo(info, &first->info);
+
+		*resched_timer =
+			(first->flags & SIGQUEUE_PREALLOC) &&
+			(info->si_code == SI_TIMER) &&
+			(info->si_sys_private);
+
 		__sigqueue_free(first);
 	} else {
 		/*
@@ -541,12 +548,12 @@ still_pending:
 }
 
 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
-			siginfo_t *info)
+			siginfo_t *info, bool *resched_timer)
 {
 	int sig = next_signal(pending, mask);
 
 	if (sig)
-		collect_signal(sig, pending, info);
+		collect_signal(sig, pending, info, resched_timer);
 	return sig;
 }
 
@@ -558,15 +565,16 @@ static int __dequeue_signal(struct sigpe
  */
 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 {
+	bool resched_timer = false;
 	int signr;
 
 	/* We only dequeue private signals from ourselves, we don't let
 	 * signalfd steal them
 	 */
-	signr = __dequeue_signal(&tsk->pending, mask, info);
+	signr = __dequeue_signal(&tsk->pending, mask, info, &resched_timer);
 	if (!signr) {
 		signr = __dequeue_signal(&tsk->signal->shared_pending,
-					 mask, info);
+					 mask, info, &resched_timer);
 		/*
 		 * itimer signal ?
 		 *
@@ -611,7 +619,7 @@ int dequeue_signal(struct task_struct *t
 		 */
 		current->jobctl |= JOBCTL_STOP_DEQUEUED;
 	}
-	if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) {
+	if (resched_timer) {
 		/*
 		 * Release the siglock to ensure proper locking order
 		 * of timer locks outside of siglocks.  Note, we leave

[PATCH 4.9 18/44] powerpc/kprobes: Pause function_graph tracing during jprobes handling

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit a9f8553e935f26cb5447f67e280946b0923cd2dc upstream.

This fixes a crash when function_graph and jprobes are used together.
This is essentially commit 237d28db036e ("ftrace/jprobes/x86: Fix
conflict between jprobes and function graph tracing"), but for powerpc.

Jprobes breaks function_graph tracing since the jprobe hook needs to use
jprobe_return(), which never returns back to the hook, but instead to
the original jprobe'd function. The solution is to momentarily pause
function_graph tracing before invoking the jprobe hook and re-enable it
when returning back to the original jprobe'd function.

Fixes: 6794c78243bf ("powerpc64: port of the function graph tracer")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/kprobes.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -511,6 +511,15 @@ int __kprobes setjmp_pre_handler(struct
 	regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc);
 #endif
 
+	/*
+	 * jprobes use jprobe_return() which skips the normal return
+	 * path of the function, and this messes up the accounting of the
+	 * function graph tracer.
+	 *
+	 * Pause function graph tracing while performing the jprobe function.
+	 */
+	pause_graph_tracing();
+
 	return 1;
 }
 
@@ -533,6 +542,8 @@ int __kprobes longjmp_break_handler(stru
 	 * saved regs...
 	 */
 	memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
+	/* It's OK to start function graph tracing again */
+	unpause_graph_tracing();
 	preempt_enable_no_resched();
 	return 1;
 }

[PATCH 4.9 19/44] powerpc/64s: Handle data breakpoints in Radix mode

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit d89ba5353f301971dd7d2f9fdf25c4432728f38e upstream.

On Power9, trying to use data breakpoints throws the splat shown
below. This is because the check for a data breakpoint in DSISR is in
do_hash_page(), which is not called when in Radix mode.

  Unable to handle kernel paging request for data at address 0xc000000000e19218
  Faulting instruction address: 0xc0000000001155e8
  cpu 0x0: Vector: 300 (Data Access) at [c0000000ef1e7b20]
  pc: c0000000001155e8: find_pid_ns+0x48/0xe0
  lr: c000000000116ac4: find_task_by_vpid+0x44/0x90
  sp: c0000000ef1e7da0
  msr: 9000000000009033
  dar: c000000000e19218
  dsisr: 400000

Move the check to handle_page_fault() so as to catch data breakpoints
in both Hash and Radix MMU modes.

We have to change the check in do_hash_page() against 0xa410 to use
0xa450, so as to include the value of (DSISR_DABRMATCH << 16).

There are two sites that call handle_page_fault() when in Radix, both
already pass DSISR in r4.

Fixes: caca285e5ab4 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code")
Reported-by: Shriya R. Kulkarni <shriykul@in.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Fix the fall-through case on hash, we need to reload DSISR]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/exceptions-64s.S |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1411,10 +1411,8 @@ USE_TEXT_SECTION()
 	.align	7
 do_hash_page:
 #ifdef CONFIG_PPC_STD_MMU_64
-	andis.	r0,r4,0xa410		/* weird error? */
+	andis.	r0,r4,0xa450		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
-	andis.  r0,r4,DSISR_DABRMATCH@h
-	bne-    handle_dabr_fault
 	CURRENT_THREAD_INFO(r11, r1)
 	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
 	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
@@ -1438,11 +1436,16 @@ do_hash_page:
 
 	/* Error */
 	blt-	13f
+
+	/* Reload DSISR into r4 for the DABR check below */
+	ld      r4,_DSISR(r1)
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
 /* Here we have a page fault that hash_page can't handle. */
 handle_page_fault:
-11:	ld	r4,_DAR(r1)
+11:	andis.  r0,r4,DSISR_DABRMATCH@h
+	bne-    handle_dabr_fault
+	ld	r4,_DAR(r1)
 	ld	r5,_DSISR(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_page_fault

[PATCH 4.9 20/44] Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Drake <drake@endlessm.com>

commit 817ae460c784f32cd45e60b2b1b21378c3c6a847 upstream.

Without this quirk, the touchpad is not responsive on this product, with
the following message repeated in the logs:

 psmouse serio1: bad data from KBC - timeout

Add it to the notimeout list alongside other similar Fujitsu laptops.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -788,6 +788,13 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
 		},
 	},
+	{
+		/* Fujitsu UH554 laptop */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK UH544"),
+		},
+	},
 	{ }
 };
 

[PATCH 4.9 21/44] brcmfmac: add parameter to pass error code in firmware callback

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit 6d0507a777fbc533f7f1bf5664a81982dd50dece upstream.

Extend the parameters in the firmware callback so it can be called
upon success and failure. This allows the caller to properly clear
all resources in the failure path. Right now the error code is
always zero, ie. success.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c |   10 +++----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h |    4 +-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c     |   17 ++++++++----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c     |   17 +++++++-----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c      |    6 ++--
 5 files changed, 34 insertions(+), 20 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -442,7 +442,7 @@ struct brcmf_fw {
 	const char *nvram_name;
 	u16 domain_nr;
 	u16 bus_nr;
-	void (*done)(struct device *dev, const struct firmware *fw,
+	void (*done)(struct device *dev, int err, const struct firmware *fw,
 		     void *nvram_image, u32 nvram_len);
 };
 
@@ -477,7 +477,7 @@ static void brcmf_fw_request_nvram_done(
 	if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
 		goto fail;
 
-	fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length);
+	fwctx->done(fwctx->dev, 0, fwctx->code, nvram, nvram_length);
 	kfree(fwctx);
 	return;
 
@@ -499,7 +499,7 @@ static void brcmf_fw_request_code_done(c
 
 	/* only requested code so done here */
 	if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) {
-		fwctx->done(fwctx->dev, fw, NULL, 0);
+		fwctx->done(fwctx->dev, 0, fw, NULL, 0);
 		kfree(fwctx);
 		return;
 	}
@@ -522,7 +522,7 @@ fail:
 
 int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
 				const char *code, const char *nvram,
-				void (*fw_cb)(struct device *dev,
+				void (*fw_cb)(struct device *dev, int err,
 					      const struct firmware *fw,
 					      void *nvram_image, u32 nvram_len),
 				u16 domain_nr, u16 bus_nr)
@@ -555,7 +555,7 @@ int brcmf_fw_get_firmwares_pcie(struct d
 
 int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
 			   const char *code, const char *nvram,
-			   void (*fw_cb)(struct device *dev,
+			   void (*fw_cb)(struct device *dev, int err,
 					 const struct firmware *fw,
 					 void *nvram_image, u32 nvram_len))
 {
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h
@@ -73,13 +73,13 @@ void brcmf_fw_nvram_free(void *nvram);
  */
 int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
 				const char *code, const char *nvram,
-				void (*fw_cb)(struct device *dev,
+				void (*fw_cb)(struct device *dev, int err,
 					      const struct firmware *fw,
 					      void *nvram_image, u32 nvram_len),
 				u16 domain_nr, u16 bus_nr);
 int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
 			   const char *code, const char *nvram,
-			   void (*fw_cb)(struct device *dev,
+			   void (*fw_cb)(struct device *dev, int err,
 					 const struct firmware *fw,
 					 void *nvram_image, u32 nvram_len));
 
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1618,16 +1618,23 @@ static const struct brcmf_buscore_ops br
 	.write32 = brcmf_pcie_buscore_write32,
 };
 
-static void brcmf_pcie_setup(struct device *dev, const struct firmware *fw,
+static void brcmf_pcie_setup(struct device *dev, int ret,
+			     const struct firmware *fw,
 			     void *nvram, u32 nvram_len)
 {
-	struct brcmf_bus *bus = dev_get_drvdata(dev);
-	struct brcmf_pciedev *pcie_bus_dev = bus->bus_priv.pcie;
-	struct brcmf_pciedev_info *devinfo = pcie_bus_dev->devinfo;
+	struct brcmf_bus *bus;
+	struct brcmf_pciedev *pcie_bus_dev;
+	struct brcmf_pciedev_info *devinfo;
 	struct brcmf_commonring **flowrings;
-	int ret;
 	u32 i;
 
+	/* check firmware loading result */
+	if (ret)
+		goto fail;
+
+	bus = dev_get_drvdata(dev);
+	pcie_bus_dev = bus->bus_priv.pcie;
+	devinfo = pcie_bus_dev->devinfo;
 	brcmf_pcie_attach(devinfo);
 
 	/* Some of the firmwares have the size of the memory of the device
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3975,21 +3975,26 @@ static const struct brcmf_bus_ops brcmf_
 	.get_memdump = brcmf_sdio_bus_get_memdump,
 };
 
-static void brcmf_sdio_firmware_callback(struct device *dev,
+static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 					 const struct firmware *code,
 					 void *nvram, u32 nvram_len)
 {
-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-	struct brcmf_sdio *bus = sdiodev->bus;
-	int err = 0;
+	struct brcmf_bus *bus_if;
+	struct brcmf_sdio_dev *sdiodev;
+	struct brcmf_sdio *bus;
 	u8 saveclk;
 
-	brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev));
+	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
+	if (err)
+		goto fail;
 
+	bus_if = dev_get_drvdata(dev);
 	if (!bus_if->drvr)
 		return;
 
+	sdiodev = bus_if->bus_priv.sdio;
+	bus = sdiodev->bus;
+
 	/* try to download image and nvram to the dongle */
 	bus->alp_only = true;
 	err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1158,13 +1158,15 @@ fail:
 	return ret;
 }
 
-static void brcmf_usb_probe_phase2(struct device *dev,
+static void brcmf_usb_probe_phase2(struct device *dev, int ret,
 				   const struct firmware *fw,
 				   void *nvram, u32 nvlen)
 {
 	struct brcmf_bus *bus = dev_get_drvdata(dev);
 	struct brcmf_usbdev_info *devinfo;
-	int ret;
+
+	if (ret)
+		goto error;
 
 	brcmf_dbg(USB, "Start fw downloading\n");
 

[PATCH 4.9 22/44] brcmfmac: use firmware callback upon failure to load

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit 03fb0e8393fae8ebb6710a99387853ed0becbc8e upstream.

When firmware loading failed the code used to unbind the device provided
by the calling code. However, for the sdio driver two devices are bound
and both need to be released upon failure. The callback has been extended
with parameter to pass error code so add that in this commit upon firmware
loading failure.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c |   27 +++++-------
 1 file changed, 13 insertions(+), 14 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -484,39 +484,38 @@ static void brcmf_fw_request_nvram_done(
 fail:
 	brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
 	release_firmware(fwctx->code);
-	device_release_driver(fwctx->dev);
+	fwctx->done(fwctx->dev, -ENOENT, NULL, NULL, 0);
 	kfree(fwctx);
 }
 
 static void brcmf_fw_request_code_done(const struct firmware *fw, void *ctx)
 {
 	struct brcmf_fw *fwctx = ctx;
-	int ret;
+	int ret = 0;
 
 	brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev));
-	if (!fw)
+	if (!fw) {
+		ret = -ENOENT;
 		goto fail;
-
-	/* only requested code so done here */
-	if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) {
-		fwctx->done(fwctx->dev, 0, fw, NULL, 0);
-		kfree(fwctx);
-		return;
 	}
+	/* only requested code so done here */
+	if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM))
+		goto done;
+
 	fwctx->code = fw;
 	ret = request_firmware_nowait(THIS_MODULE, true, fwctx->nvram_name,
 				      fwctx->dev, GFP_KERNEL, fwctx,
 				      brcmf_fw_request_nvram_done);
 
-	if (!ret)
-		return;
-
-	brcmf_fw_request_nvram_done(NULL, fwctx);
+	/* pass NULL to nvram callback for bcm47xx fallback */
+	if (ret)
+		brcmf_fw_request_nvram_done(NULL, fwctx);
 	return;
 
 fail:
 	brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
-	device_release_driver(fwctx->dev);
+done:
+	fwctx->done(fwctx->dev, ret, fw, NULL, 0);
 	kfree(fwctx);
 }
 

[PATCH 4.9 23/44] brcmfmac: unbind all devices upon failure in firmware callback

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit 7a51461fc2da82a6c565a3ee65c41c197f28225d upstream.

When request firmware fails, brcmf_ops_sdio_remove is being called and
brcmf_bus freed. In such circumstancies if you do a suspend/resume cycle
the kernel hangs on resume due a NULL pointer dereference in resume
function. So in brcmf_sdio_firmware_callback() we need to unbind the
driver from both sdio_func devices when firmware load failure is indicated.

Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3985,14 +3985,14 @@ static void brcmf_sdio_firmware_callback
 	u8 saveclk;
 
 	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
+	bus_if = dev_get_drvdata(dev);
+	sdiodev = bus_if->bus_priv.sdio;
 	if (err)
 		goto fail;
 
-	bus_if = dev_get_drvdata(dev);
 	if (!bus_if->drvr)
 		return;
 
-	sdiodev = bus_if->bus_priv.sdio;
 	bus = sdiodev->bus;
 
 	/* try to download image and nvram to the dongle */
@@ -4081,6 +4081,7 @@ release:
 fail:
 	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
 	device_release_driver(dev);
+	device_release_driver(&sdiodev->func[2]->dev);
 }
 
 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)

[PATCH 4.9 24/44] time: Fix clock->read(clock) race around clocksource changes

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit ceea5e3771ed2378668455fa21861bead7504df5 upstream.

In tests, which excercise switching of clocksources, a NULL
pointer dereference can be observed on AMR64 platforms in the
clocksource read() function:

u64 clocksource_mmio_readl_down(struct clocksource *c)
{
	return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
}

This is called from the core timekeeping code via:

	cycle_now = tkr->read(tkr->clock);

tkr->read is the cached tkr->clock->read() function pointer.
When the clocksource is changed then tkr->clock and tkr->read
are updated sequentially. The code above results in a sequential
load operation of tkr->read and tkr->clock as well.

If the store to tkr->clock hits between the loads of tkr->read
and tkr->clock, then the old read() function is called with the
new clock pointer. As a consequence the read() function
dereferences a different data structure and the resulting 'reg'
pointer can point anywhere including NULL.

This problem was introduced when the timekeeping code was
switched over to use struct tk_read_base. Before that, it was
theoretically possible as well when the compiler decided to
reload clock in the code sequence:

     now = tk->clock->read(tk->clock);

Add a helper function which avoids the issue by reading
tk_read_base->clock once into a local variable clk and then issue
the read function via clk->read(clk). This guarantees that the
read() function always gets the proper clocksource pointer handed
in.

Since there is now no use for the tkr.read pointer, this patch
also removes it, and to address stopping the fast timekeeper
during suspend/resume, it introduces a dummy clocksource to use
rather then just a dummy read function.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/timekeeper_internal.h |    1 
 kernel/time/timekeeping.c           |   52 ++++++++++++++++++++++++------------
 2 files changed, 36 insertions(+), 17 deletions(-)

--- a/include/linux/timekeeper_internal.h
+++ b/include/linux/timekeeper_internal.h
@@ -29,7 +29,6 @@
  */
 struct tk_read_base {
 	struct clocksource	*clock;
-	cycle_t			(*read)(struct clocksource *cs);
 	cycle_t			mask;
 	cycle_t			cycle_last;
 	u32			mult;
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -116,6 +116,26 @@ static inline void tk_update_sleep_time(
 	tk->offs_boot = ktime_add(tk->offs_boot, delta);
 }
 
+/*
+ * tk_clock_read - atomic clocksource read() helper
+ *
+ * This helper is necessary to use in the read paths because, while the
+ * seqlock ensures we don't return a bad value while structures are updated,
+ * it doesn't protect from potential crashes. There is the possibility that
+ * the tkr's clocksource may change between the read reference, and the
+ * clock reference passed to the read function.  This can cause crashes if
+ * the wrong clocksource is passed to the wrong read function.
+ * This isn't necessary to use when holding the timekeeper_lock or doing
+ * a read of the fast-timekeeper tkrs (which is protected by its own locking
+ * and update logic).
+ */
+static inline u64 tk_clock_read(struct tk_read_base *tkr)
+{
+	struct clocksource *clock = READ_ONCE(tkr->clock);
+
+	return clock->read(clock);
+}
+
 #ifdef CONFIG_DEBUG_TIMEKEEPING
 #define WARNING_FREQ (HZ*300) /* 5 minute rate-limiting */
 
@@ -173,7 +193,7 @@ static inline cycle_t timekeeping_get_de
 	 */
 	do {
 		seq = read_seqcount_begin(&tk_core.seq);
-		now = tkr->read(tkr->clock);
+		now = tk_clock_read(tkr);
 		last = tkr->cycle_last;
 		mask = tkr->mask;
 		max = tkr->clock->max_cycles;
@@ -207,7 +227,7 @@ static inline cycle_t timekeeping_get_de
 	cycle_t cycle_now, delta;
 
 	/* read clocksource */
-	cycle_now = tkr->read(tkr->clock);
+	cycle_now = tk_clock_read(tkr);
 
 	/* calculate the delta since the last update_wall_time */
 	delta = clocksource_delta(cycle_now, tkr->cycle_last, tkr->mask);
@@ -236,12 +256,10 @@ static void tk_setup_internals(struct ti
 	++tk->cs_was_changed_seq;
 	old_clock = tk->tkr_mono.clock;
 	tk->tkr_mono.clock = clock;
-	tk->tkr_mono.read = clock->read;
 	tk->tkr_mono.mask = clock->mask;
-	tk->tkr_mono.cycle_last = tk->tkr_mono.read(clock);
+	tk->tkr_mono.cycle_last = tk_clock_read(&tk->tkr_mono);
 
 	tk->tkr_raw.clock = clock;
-	tk->tkr_raw.read = clock->read;
 	tk->tkr_raw.mask = clock->mask;
 	tk->tkr_raw.cycle_last = tk->tkr_mono.cycle_last;
 
@@ -405,7 +423,7 @@ static __always_inline u64 __ktime_get_f
 
 		now += timekeeping_delta_to_ns(tkr,
 				clocksource_delta(
-					tkr->read(tkr->clock),
+					tk_clock_read(tkr),
 					tkr->cycle_last,
 					tkr->mask));
 	} while (read_seqcount_retry(&tkf->seq, seq));
@@ -433,6 +451,10 @@ static cycle_t dummy_clock_read(struct c
 	return cycles_at_suspend;
 }
 
+static struct clocksource dummy_clock = {
+	.read = dummy_clock_read,
+};
+
 /**
  * halt_fast_timekeeper - Prevent fast timekeeper from accessing clocksource.
  * @tk: Timekeeper to snapshot.
@@ -449,13 +471,13 @@ static void halt_fast_timekeeper(struct
 	struct tk_read_base *tkr = &tk->tkr_mono;
 
 	memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
-	cycles_at_suspend = tkr->read(tkr->clock);
-	tkr_dummy.read = dummy_clock_read;
+	cycles_at_suspend = tk_clock_read(tkr);
+	tkr_dummy.clock = &dummy_clock;
 	update_fast_timekeeper(&tkr_dummy, &tk_fast_mono);
 
 	tkr = &tk->tkr_raw;
 	memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
-	tkr_dummy.read = dummy_clock_read;
+	tkr_dummy.clock = &dummy_clock;
 	update_fast_timekeeper(&tkr_dummy, &tk_fast_raw);
 }
 
@@ -621,11 +643,10 @@ static void timekeeping_update(struct ti
  */
 static void timekeeping_forward_now(struct timekeeper *tk)
 {
-	struct clocksource *clock = tk->tkr_mono.clock;
 	cycle_t cycle_now, delta;
 	s64 nsec;
 
-	cycle_now = tk->tkr_mono.read(clock);
+	cycle_now = tk_clock_read(&tk->tkr_mono);
 	delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
 	tk->tkr_mono.cycle_last = cycle_now;
 	tk->tkr_raw.cycle_last  = cycle_now;
@@ -901,8 +922,7 @@ void ktime_get_snapshot(struct system_ti
 
 	do {
 		seq = read_seqcount_begin(&tk_core.seq);
-
-		now = tk->tkr_mono.read(tk->tkr_mono.clock);
+		now = tk_clock_read(&tk->tkr_mono);
 		systime_snapshot->cs_was_changed_seq = tk->cs_was_changed_seq;
 		systime_snapshot->clock_was_set_seq = tk->clock_was_set_seq;
 		base_real = ktime_add(tk->tkr_mono.base,
@@ -1081,7 +1101,7 @@ int get_device_system_crosststamp(int (*
 		 * Check whether the system counter value provided by the
 		 * device driver is on the current timekeeping interval.
 		 */
-		now = tk->tkr_mono.read(tk->tkr_mono.clock);
+		now = tk_clock_read(&tk->tkr_mono);
 		interval_start = tk->tkr_mono.cycle_last;
 		if (!cycle_between(interval_start, cycles, now)) {
 			clock_was_set_seq = tk->clock_was_set_seq;
@@ -1639,7 +1659,7 @@ void timekeeping_resume(void)
 	 * The less preferred source will only be tried if there is no better
 	 * usable source. The rtc part is handled separately in rtc core code.
 	 */
-	cycle_now = tk->tkr_mono.read(clock);
+	cycle_now = tk_clock_read(&tk->tkr_mono);
 	if ((clock->flags & CLOCK_SOURCE_SUSPEND_NONSTOP) &&
 		cycle_now > tk->tkr_mono.cycle_last) {
 		u64 num, max = ULLONG_MAX;
@@ -2057,7 +2077,7 @@ void update_wall_time(void)
 #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 	offset = real_tk->cycle_interval;
 #else
-	offset = clocksource_delta(tk->tkr_mono.read(tk->tkr_mono.clock),
+	offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
 				   tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
 #endif
 

[PATCH 4.9 25/44] time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 3d88d56c5873f6eebe23e05c3da701960146b801 upstream.

Due to how the MONOTONIC_RAW accumulation logic was handled,
there is the potential for a 1ns discontinuity when we do
accumulations. This small discontinuity has for the most part
gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW
in their vDSO clock_gettime implementation, we've seen failures
with the inconsistency-check test in kselftest.

This patch addresses the issue by using the same sub-ns
accumulation handling that CLOCK_MONOTONIC uses, which avoids
the issue for in-kernel users.

Since the ARM64 vDSO implementation has its own clock_gettime
calculation logic, this patch reduces the frequency of errors,
but failures are still seen. The ARM64 vDSO will need to be
updated to include the sub-nanosecond xtime_nsec values in its
calculation for this issue to be completely fixed.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Daniel Mentz <danielmentz@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/timekeeper_internal.h |    4 ++--
 kernel/time/timekeeping.c           |   20 ++++++++++----------
 2 files changed, 12 insertions(+), 12 deletions(-)

--- a/include/linux/timekeeper_internal.h
+++ b/include/linux/timekeeper_internal.h
@@ -57,7 +57,7 @@ struct tk_read_base {
  *			interval.
  * @xtime_remainder:	Shifted nano seconds left over when rounding
  *			@cycle_interval
- * @raw_interval:	Raw nano seconds accumulated per NTP interval.
+ * @raw_interval:	Shifted raw nano seconds accumulated per NTP interval.
  * @ntp_error:		Difference between accumulated time and NTP time in ntp
  *			shifted nano seconds.
  * @ntp_error_shift:	Shift conversion between clock shifted nano seconds and
@@ -99,7 +99,7 @@ struct timekeeper {
 	cycle_t			cycle_interval;
 	u64			xtime_interval;
 	s64			xtime_remainder;
-	u32			raw_interval;
+	u64			raw_interval;
 	/* The ntp_tick_length() value currently being used.
 	 * This cached copy ensures we consistently apply the tick
 	 * length for an entire tick, as ntp_tick_length may change
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -278,8 +278,7 @@ static void tk_setup_internals(struct ti
 	/* Go back from cycles -> shifted ns */
 	tk->xtime_interval = (u64) interval * clock->mult;
 	tk->xtime_remainder = ntpinterval - tk->xtime_interval;
-	tk->raw_interval =
-		((u64) interval * clock->mult) >> clock->shift;
+	tk->raw_interval = interval * clock->mult;
 
 	 /* if changing clocks, convert xtime_nsec shift units */
 	if (old_clock) {
@@ -2023,7 +2022,7 @@ static cycle_t logarithmic_accumulation(
 						unsigned int *clock_set)
 {
 	cycle_t interval = tk->cycle_interval << shift;
-	u64 raw_nsecs;
+	u64 snsec_per_sec;
 
 	/* If the offset is smaller than a shifted interval, do nothing */
 	if (offset < interval)
@@ -2038,14 +2037,15 @@ static cycle_t logarithmic_accumulation(
 	*clock_set |= accumulate_nsecs_to_secs(tk);
 
 	/* Accumulate raw time */
-	raw_nsecs = (u64)tk->raw_interval << shift;
-	raw_nsecs += tk->raw_time.tv_nsec;
-	if (raw_nsecs >= NSEC_PER_SEC) {
-		u64 raw_secs = raw_nsecs;
-		raw_nsecs = do_div(raw_secs, NSEC_PER_SEC);
-		tk->raw_time.tv_sec += raw_secs;
+	tk->tkr_raw.xtime_nsec += (u64)tk->raw_time.tv_nsec << tk->tkr_raw.shift;
+	tk->tkr_raw.xtime_nsec += tk->raw_interval << shift;
+	snsec_per_sec = (u64)NSEC_PER_SEC << tk->tkr_raw.shift;
+	while (tk->tkr_raw.xtime_nsec >= snsec_per_sec) {
+		tk->tkr_raw.xtime_nsec -= snsec_per_sec;
+		tk->raw_time.tv_sec++;
 	}
-	tk->raw_time.tv_nsec = raw_nsecs;
+	tk->raw_time.tv_nsec = tk->tkr_raw.xtime_nsec >> tk->tkr_raw.shift;
+	tk->tkr_raw.xtime_nsec -= (u64)tk->raw_time.tv_nsec << tk->tkr_raw.shift;
 
 	/* Accumulate error between NTP and clock interval */
 	tk->ntp_error += tk->ntp_tick << shift;

[PATCH 4.9 26/44] arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

commit dbb236c1ceb697a559e0694ac4c9e7b9131d0b16 upstream.

Recently vDSO support for CLOCK_MONOTONIC_RAW was added in
49eea433b326 ("arm64: Add support for CLOCK_MONOTONIC_RAW in
clock_gettime() vDSO"). Noticing that the core timekeeping code
never set tkr_raw.xtime_nsec, the vDSO implementation didn't
bother exposing it via the data page and instead took the
unshifted tk->raw_time.tv_nsec value which was then immediately
shifted left in the vDSO code.

Unfortunately, by accellerating the MONOTONIC_RAW clockid, it
uncovered potential 1ns time inconsistencies caused by the
timekeeping core not handing sub-ns resolution.

Now that the core code has been fixed and is actually setting
tkr_raw.xtime_nsec, we need to take that into account in the
vDSO by adding it to the shifted raw_time value, in order to
fix the user-visible inconsistency. Rather than do that at each
use (and expand the data page in the process), instead perform
the shift/addition operation when populating the data page and
remove the shift from the vDSO code entirely.

[jstultz: minor whitespace tweak, tried to improve commit
 message to make it more clear this fixes a regression]
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Daniel Mentz <danielmentz@google.com>
Acked-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Link: http://lkml.kernel.org/r/1496965462-20003-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/vdso.c              |    5 +++--
 arch/arm64/kernel/vdso/gettimeofday.S |    1 -
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -217,10 +217,11 @@ void update_vsyscall(struct timekeeper *
 		/* tkr_mono.cycle_last == tkr_raw.cycle_last */
 		vdso_data->cs_cycle_last	= tk->tkr_mono.cycle_last;
 		vdso_data->raw_time_sec		= tk->raw_time.tv_sec;
-		vdso_data->raw_time_nsec	= tk->raw_time.tv_nsec;
+		vdso_data->raw_time_nsec	= (tk->raw_time.tv_nsec <<
+						   tk->tkr_raw.shift) +
+						  tk->tkr_raw.xtime_nsec;
 		vdso_data->xtime_clock_sec	= tk->xtime_sec;
 		vdso_data->xtime_clock_nsec	= tk->tkr_mono.xtime_nsec;
-		/* tkr_raw.xtime_nsec == 0 */
 		vdso_data->cs_mono_mult		= tk->tkr_mono.mult;
 		vdso_data->cs_raw_mult		= tk->tkr_raw.mult;
 		/* tkr_mono.shift == tkr_raw.shift */
--- a/arch/arm64/kernel/vdso/gettimeofday.S
+++ b/arch/arm64/kernel/vdso/gettimeofday.S
@@ -256,7 +256,6 @@ monotonic_raw:
 	seqcnt_check fail=monotonic_raw
 
 	/* All computations are done with left-shifted nsecs. */
-	lsl	x14, x14, x12
 	get_nsec_per_sec res=x9
 	lsl	x9, x9, x12
 

[PATCH 4.9 27/44] target: Fix kref->refcount underflow in transport_cmd_finish_abort

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 73d4e580ccc5c3e05cea002f18111f66c9c07034 upstream.

This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().

Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:

[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51

Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.

To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.

Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Gary Guo <ghg@datera.io>
Tested-by: Chu Yuan Lin <cyl@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_internal.h  |    2 +-
 drivers/target/target_core_tmr.c       |   16 ++++++++--------
 drivers/target/target_core_transport.c |    9 ++++++---
 3 files changed, 15 insertions(+), 12 deletions(-)

--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -131,7 +131,7 @@ int	init_se_kmem_caches(void);
 void	release_se_kmem_caches(void);
 u32	scsi_get_new_index(scsi_index_t);
 void	transport_subsystem_check_init(void);
-void	transport_cmd_finish_abort(struct se_cmd *, int);
+int	transport_cmd_finish_abort(struct se_cmd *, int);
 unsigned char *transport_dump_cmd_direction(struct se_cmd *);
 void	transport_dump_dev_state(struct se_device *, char *, int *);
 void	transport_dump_dev_info(struct se_device *, struct se_lun *,
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -75,7 +75,7 @@ void core_tmr_release_req(struct se_tmr_
 	kfree(tmr);
 }
 
-static void core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
+static int core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
 {
 	unsigned long flags;
 	bool remove = true, send_tas;
@@ -91,7 +91,7 @@ static void core_tmr_handle_tas_abort(st
 		transport_send_task_abort(cmd);
 	}
 
-	transport_cmd_finish_abort(cmd, remove);
+	return transport_cmd_finish_abort(cmd, remove);
 }
 
 static int target_check_cdb_and_preempt(struct list_head *list,
@@ -185,8 +185,8 @@ void core_tmr_abort_task(
 		cancel_work_sync(&se_cmd->work);
 		transport_wait_for_tasks(se_cmd);
 
-		transport_cmd_finish_abort(se_cmd, true);
-		target_put_sess_cmd(se_cmd);
+		if (!transport_cmd_finish_abort(se_cmd, true))
+			target_put_sess_cmd(se_cmd);
 
 		printk("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for"
 				" ref_tag: %llu\n", ref_tag);
@@ -286,8 +286,8 @@ static void core_tmr_drain_tmr_list(
 		cancel_work_sync(&cmd->work);
 		transport_wait_for_tasks(cmd);
 
-		transport_cmd_finish_abort(cmd, 1);
-		target_put_sess_cmd(cmd);
+		if (!transport_cmd_finish_abort(cmd, 1))
+			target_put_sess_cmd(cmd);
 	}
 }
 
@@ -385,8 +385,8 @@ static void core_tmr_drain_state_list(
 		cancel_work_sync(&cmd->work);
 		transport_wait_for_tasks(cmd);
 
-		core_tmr_handle_tas_abort(cmd, tas);
-		target_put_sess_cmd(cmd);
+		if (!core_tmr_handle_tas_abort(cmd, tas))
+			target_put_sess_cmd(cmd);
 	}
 }
 
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -673,9 +673,10 @@ static void transport_lun_remove_cmd(str
 		percpu_ref_put(&lun->lun_ref);
 }
 
-void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
+int transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
 {
 	bool ack_kref = (cmd->se_cmd_flags & SCF_ACK_KREF);
+	int ret = 0;
 
 	if (cmd->se_cmd_flags & SCF_SE_LUN_CMD)
 		transport_lun_remove_cmd(cmd);
@@ -687,9 +688,11 @@ void transport_cmd_finish_abort(struct s
 		cmd->se_tfo->aborted_task(cmd);
 
 	if (transport_cmd_check_stop_to_fabric(cmd))
-		return;
+		return 1;
 	if (remove && ack_kref)
-		transport_put_cmd(cmd);
+		ret = transport_put_cmd(cmd);
+
+	return ret;
 }
 
 static void target_complete_failure_work(struct work_struct *work)

[PATCH 4.9 28/44] iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 105fa2f44e504c830697b0c794822112d79808dc upstream.

This patch fixes a BUG() in iscsit_close_session() that could be
triggered when iscsit_logout_post_handler() execution from within
tx thread context was not run for more than SECONDS_FOR_LOGOUT_COMP
(15 seconds), and the TCP connection didn't already close before
then forcing tx thread context to automatically exit.

This would manifest itself during explicit logout as:

[33206.974254] 1 connection(s) still exist for iSCSI session to iqn.1993-08.org.debian:01:3f5523242179
[33206.980184] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 2100.772 msecs
[33209.078643] ------------[ cut here ]------------
[33209.078646] kernel BUG at drivers/target/iscsi/iscsi_target.c:4346!

Normally when explicit logout attempt fails, the tx thread context
exits and iscsit_close_connection() from rx thread context does the
extra cleanup once it detects conn->conn_logout_remove has not been
cleared by the logout type specific post handlers.

To address this special case, if the logout post handler in tx thread
context detects conn->tx_thread_active has already been cleared, simply
return and exit in order for existing iscsit_close_connection()
logic from rx thread context do failed logout cleanup.

Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Gary Guo <ghg@datera.io>
Tested-by: Chu Yuan Lin <cyl@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4431,8 +4431,11 @@ static void iscsit_logout_post_handler_c
 	 * always sleep waiting for RX/TX thread shutdown to complete
 	 * within iscsit_close_connection().
 	 */
-	if (!conn->conn_transport->rdma_shutdown)
+	if (!conn->conn_transport->rdma_shutdown) {
 		sleep = cmpxchg(&conn->tx_thread_active, true, false);
+		if (!sleep)
+			return;
+	}
 
 	atomic_set(&conn->conn_logout_remove, 0);
 	complete(&conn->conn_logout_comp);
@@ -4448,8 +4451,11 @@ static void iscsit_logout_post_handler_s
 {
 	int sleep = 1;
 
-	if (!conn->conn_transport->rdma_shutdown)
+	if (!conn->conn_transport->rdma_shutdown) {
 		sleep = cmpxchg(&conn->tx_thread_active, true, false);
+		if (!sleep)
+			return;
+	}
 
 	atomic_set(&conn->conn_logout_remove, 0);
 	complete(&conn->conn_logout_comp);

[PATCH 4.9 29/44] iscsi-target: Reject immediate data underflow larger than SCSI transfer length

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit abb85a9b512e8ca7ad04a5a8a6db9664fe644974 upstream.

When iscsi WRITE underflow occurs there are two different scenarios
that can happen.

Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH
underflow is detected, the iscsi immediate data payload is the
smaller SCSI CDB TRANSFER LENGTH.

That is, when a host fabric LLD is using a fixed size EDTL for
a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual
SCSI payload ends up being smaller than EDTL.  In iscsi, this
means the received iscsi immediate data payload matches the
smaller SCSI CDB TRANSFER LENGTH, because there is no more
SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH.

However, it's possible for a malicous host to send a WRITE
underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH,
but incoming iscsi immediate data actually matches EDTL.

In the wild, we've never had a iscsi host environment actually
try to do this.

For this special case, it's wrong to truncate part of the
control CDB payload and continue to process the command during
underflow when immediate data payload received was larger than
SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the
bogus payload as a defensive action.

Note this potential bug was originally relaxed by the following
for allowing WRITE underflow in MSFT FCP host environments:

   commit c72c5250224d475614a00c1d7e54a67f77cd3410
   Author: Roland Dreier <roland@purestorage.com>
   Date:   Wed Jul 22 15:08:18 2015 -0700

      target: allow underflow/overflow for PR OUT etc. commands

Cc: Roland Dreier <roland@purestorage.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1287,6 +1287,18 @@ iscsit_get_immediate_data(struct iscsi_c
 	 */
 	if (dump_payload)
 		goto after_immediate_data;
+	/*
+	 * Check for underflow case where both EDTL and immediate data payload
+	 * exceeds what is presented by CDB's TRANSFER LENGTH, and what has
+	 * already been set in target_cmd_size_check() as se_cmd->data_length.
+	 *
+	 * For this special case, fail the command and dump the immediate data
+	 * payload.
+	 */
+	if (cmd->first_burst_len > cmd->se_cmd.data_length) {
+		cmd->sense_reason = TCM_INVALID_CDB_FIELD;
+		goto after_immediate_data;
+	}
 
 	immed_ret = iscsit_handle_immediate_data(cmd, hdr,
 					cmd->first_burst_len);

[PATCH 4.9 30/44] drm/radeon: add a PX quirk for another K53TK variant

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 4eb59793cca00b0e629b6d55b5abb5acb82c5868 upstream.

Disable PX on these systems.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_device.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -136,6 +136,10 @@ static struct radeon_px_quirk radeon_px_
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=51381
 	 */
 	{ PCI_VENDOR_ID_ATI, 0x6840, 0x1043, 0x2122, RADEON_PX_QUIRK_DISABLE_PX },
+	/* Asus K53TK laptop with AMD A6-3420M APU and Radeon 7670m GPU
+	 * https://bugs.freedesktop.org/show_bug.cgi?id=101491
+	 */
+	{ PCI_VENDOR_ID_ATI, 0x6741, 0x1043, 0x2122, RADEON_PX_QUIRK_DISABLE_PX },
 	/* macbook pro 8.2 */
 	{ PCI_VENDOR_ID_ATI, 0x6741, PCI_VENDOR_ID_APPLE, 0x00e2, RADEON_PX_QUIRK_LONG_WAKEUP },
 	{ 0, 0, 0, 0, 0 },

[PATCH 4.9 31/44] drm/radeon: add a quirk for Toshiba Satellite L20-183

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit acfd6ee4fa7ebeee75511825fe02be3f7ac1d668 upstream.

Fixes resume from suspend.

bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121
Reported-by: Przemek <soprwa@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_combios.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -3393,6 +3393,13 @@ void radeon_combios_asic_init(struct drm
 	    rdev->pdev->subsystem_vendor == 0x103c &&
 	    rdev->pdev->subsystem_device == 0x280a)
 		return;
+	/* quirk for rs4xx Toshiba Sattellite L20-183 latop to make it resume
+	 * - it hangs on resume inside the dynclk 1 table.
+	 */
+	if (rdev->family == CHIP_RS400 &&
+	    rdev->pdev->subsystem_vendor == 0x1179 &&
+	    rdev->pdev->subsystem_device == 0xff31)
+	        return;
 
 	/* DYN CLK 1 */
 	table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);

[PATCH 4.9 35/44] of: Add check to of_scan_flat_dt() before accessing initial_boot_params

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Wolf <dev-NTEO@vplace.de>

commit 3ec754410cb3e931a6c4920b1a150f21a94a2bf4 upstream.

An empty __dtb_start to __dtb_end section might result in
initial_boot_params being null for arch/mips/ralink. This showed that the
boot process hangs indefinitely in of_scan_flat_dt().

Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14605/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/fdt.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -741,9 +741,12 @@ int __init of_scan_flat_dt(int (*it)(uns
 	const char *pathp;
 	int offset, rc = 0, depth = -1;
 
-        for (offset = fdt_next_node(blob, -1, &depth);
-             offset >= 0 && depth >= 0 && !rc;
-             offset = fdt_next_node(blob, offset, &depth)) {
+	if (!blob)
+		return 0;
+
+	for (offset = fdt_next_node(blob, -1, &depth);
+	     offset >= 0 && depth >= 0 && !rc;
+	     offset = fdt_next_node(blob, offset, &depth)) {
 
 		pathp = fdt_get_name(blob, offset, NULL);
 		if (*pathp == '/')

[PATCH 4.9 37/44] usb: gadget: f_fs: avoid out of bounds access on comp_desc

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: William Wu <william.wu@rock-chips.com>

commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c upstream.

Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.

I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:

==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
  ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
 >ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                       ^
  ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_fs.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1858,12 +1858,12 @@ static int ffs_func_eps_enable(struct ff
 		ep->ep->driver_data = ep;
 		ep->ep->desc = ds;
 
-		comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
-				USB_DT_ENDPOINT_SIZE);
-		ep->ep->maxburst = comp_desc->bMaxBurst + 1;
-
-		if (needs_comp_desc)
+		if (needs_comp_desc) {
+			comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
+					USB_DT_ENDPOINT_SIZE);
+			ep->ep->maxburst = comp_desc->bMaxBurst + 1;
 			ep->ep->comp_desc = comp_desc;
+		}
 
 		ret = usb_ep_enable(ep->ep);
 		if (likely(!ret)) {

[PATCH 4.9 38/44] rt2x00: avoid introducing a USB dependency in the rt2x00lib module

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit 6232c17438ed01f43665197db5a98a4a4f77ef47 upstream.

As reported by Felix:

Though protected by an ifdef, introducing an usb symbol dependency in
the rt2x00lib module is a major inconvenience for distributions that
package kernel modules split into individual packages.

Get rid of this unnecessary dependency by calling the usb related
function from a more suitable place.

Cc: Vishal Thanki <vishalthanki@gmail.com>
Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ralink/rt2x00/rt2x00dev.c |   23 ++++++++---------------
 drivers/net/wireless/ralink/rt2x00/rt2x00usb.c |    5 +++++
 2 files changed, 13 insertions(+), 15 deletions(-)

--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1422,21 +1422,6 @@ void rt2x00lib_remove_dev(struct rt2x00_
 	cancel_work_sync(&rt2x00dev->intf_work);
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
 	cancel_work_sync(&rt2x00dev->sleep_work);
-#if IS_ENABLED(CONFIG_RT2X00_LIB_USB)
-	if (rt2x00_is_usb(rt2x00dev)) {
-		usb_kill_anchored_urbs(rt2x00dev->anchor);
-		hrtimer_cancel(&rt2x00dev->txstatus_timer);
-		cancel_work_sync(&rt2x00dev->rxdone_work);
-		cancel_work_sync(&rt2x00dev->txdone_work);
-	}
-#endif
-	if (rt2x00dev->workqueue)
-		destroy_workqueue(rt2x00dev->workqueue);
-
-	/*
-	 * Free the tx status fifo.
-	 */
-	kfifo_free(&rt2x00dev->txstatus_fifo);
 
 	/*
 	 * Kill the tx status tasklet.
@@ -1452,6 +1437,14 @@ void rt2x00lib_remove_dev(struct rt2x00_
 	 */
 	rt2x00lib_uninitialize(rt2x00dev);
 
+	if (rt2x00dev->workqueue)
+		destroy_workqueue(rt2x00dev->workqueue);
+
+	/*
+	 * Free the tx status fifo.
+	 */
+	kfifo_free(&rt2x00dev->txstatus_fifo);
+
 	/*
 	 * Free extra components
 	 */
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
@@ -740,6 +740,11 @@ void rt2x00usb_uninitialize(struct rt2x0
 {
 	struct data_queue *queue;
 
+	usb_kill_anchored_urbs(rt2x00dev->anchor);
+	hrtimer_cancel(&rt2x00dev->txstatus_timer);
+	cancel_work_sync(&rt2x00dev->rxdone_work);
+	cancel_work_sync(&rt2x00dev->txdone_work);
+
 	queue_for_each(rt2x00dev, queue)
 		rt2x00usb_free_entries(queue);
 }

[PATCH 4.9 39/44] net: phy: Initialize mdio clock at probe function

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>

commit bb1a619735b4660f21bce3e728b937640024b4ad upstream.

USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/phy/mdio-bcm-iproc.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/mdio-bcm-iproc.c
+++ b/drivers/net/phy/mdio-bcm-iproc.c
@@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bu
 	if (rc)
 		return rc;
 
-	iproc_mdio_config_clk(priv->base);
-
 	/* Prepare the read operation */
 	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
 		(reg << MII_DATA_RA_SHIFT) |
@@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_b
 	if (rc)
 		return rc;
 
-	iproc_mdio_config_clk(priv->base);
-
 	/* Prepare the write operation */
 	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
 		(reg << MII_DATA_RA_SHIFT) |
@@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platf
 	bus->read = iproc_mdio_read;
 	bus->write = iproc_mdio_write;
 
+	iproc_mdio_config_clk(priv->base);
+
 	rc = of_mdiobus_register(bus, pdev->dev.of_node);
 	if (rc) {
 		dev_err(&pdev->dev, "MDIO bus registration failed\n");

[PATCH 4.9 39/44] net: phy: Initialize mdio clock at probe function

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>

commit bb1a619735b4660f21bce3e728b937640024b4ad upstream.

USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/phy/mdio-bcm-iproc.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/net/phy/mdio-bcm-iproc.c
+++ b/drivers/net/phy/mdio-bcm-iproc.c
@@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bu
 	if (rc)
 		return rc;
 
-	iproc_mdio_config_clk(priv->base);
-
 	/* Prepare the read operation */
 	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
 		(reg << MII_DATA_RA_SHIFT) |
@@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_b
 	if (rc)
 		return rc;
 
-	iproc_mdio_config_clk(priv->base);
-
 	/* Prepare the write operation */
 	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
 		(reg << MII_DATA_RA_SHIFT) |
@@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platf
 	bus->read = iproc_mdio_read;
 	bus->write = iproc_mdio_write;
 
+	iproc_mdio_config_clk(priv->base);
+
 	rc = of_mdiobus_register(bus, pdev->dev.of_node);
 	if (rc) {
 		dev_err(&pdev->dev, "MDIO bus registration failed\n");

[PATCH 4.9 40/44] dmaengine: bcm2835: Fix cyclic DMA period splitting

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Reichl <hias@horus.com>

commit 2201ac6129fa162ac24da089a034bb0971648ebb upstream.

The code responsible for splitting periods into chunks that
can be handled by the DMA controller missed to update total_len,
the number of bytes processed in the current period, when there
are more chunks to follow.

Therefore total_len was stuck at 0 and the code didn't work at all.
This resulted in a wrong control block layout and audio issues because
the cyclic DMA callback wasn't executing on period boundaries.

Fix this by adding the missing total_len update.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Tested-by: Clive Messer <clive.messer@digitaldreamtime.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/dma/bcm2835-dma.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -251,8 +251,11 @@ static void bcm2835_dma_create_cb_set_le
 	 */
 
 	/* have we filled in period_length yet? */
-	if (*total_len + control_block->length < period_len)
+	if (*total_len + control_block->length < period_len) {
+		/* update number of bytes in this period so far */
+		*total_len += control_block->length;
 		return;
+	}
 
 	/* calculate the length that remains to reach period_length */
 	control_block->length = period_len - *total_len;

[PATCH 4.9 41/44] spi: double time out tolerance

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hauke Mehrtens <hauke@hauke-m.de>

commit 833bfade96561216aa2129516a5926a0326860a2 upstream.

The generic SPI code calculates how long the issued transfer would take
and adds 100ms in addition to the timeout as tolerance. On my 500 MHz
Lantiq Mips SoC I am getting timeouts from the SPI like this when the
system boots up:

m25p80 spi32766.4: SPI transfer timed out
blk_update_request: I/O error, dev mtdblock3, sector 2
SQUASHFS error: squashfs_read_data failed to read block 0x6e

After increasing the tolerance for the timeout to 200ms I haven't seen
these SPI transfer time outs any more.
The Lantiq SPI driver in use here has an extra work queue in between,
which gets triggered when the controller send the last word and the
hardware FIFOs used for reading and writing are only 8 words long.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1004,7 +1004,7 @@ static int spi_transfer_one_message(stru
 				ret = 0;
 				ms = 8LL * 1000LL * xfer->len;
 				do_div(ms, xfer->speed_hz);
-				ms += ms + 100; /* some tolerance */
+				ms += ms + 200; /* some tolerance */
 
 				if (ms > UINT_MAX)
 					ms = UINT_MAX;

[PATCH 4.9 42/44] net: phy: fix marvell phy status reading

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 898805e0cdf7fd860ec21bf661d3a0285a3defbd upstream.

The Marvell driver incorrectly provides phydev->lp_advertising as the
logical and of the link partner's advert and our advert.  This is
incorrect - this field is supposed to store the link parter's unmodified
advertisment.

This allows ethtool to report the correct link partner auto-negotiation
status.

Fixes: be937f1f89ca ("Marvell PHY m88e1111 driver fix")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/phy/marvell.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1114,8 +1114,6 @@ static int marvell_read_status_page(stru
 		if (adv < 0)
 			return adv;
 
-		lpa &= adv;
-
 		if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
 			phydev->duplex = DUPLEX_FULL;
 		else

[PATCH 4.9 43/44] jump label: fix passing kbuild_cflags when checking for asm goto support

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>

commit 7292ae3d5a18fb922be496e6bb687647193569b4 upstream.

The latest change of asm goto support check added passing of KBUILD_CFLAGS
to compiler.  When these flags reference gcc plugins that are not built yet,
the check fails.

When one runs "make bzImage" followed by "make modules", the kernel is always
built with HAVE_JUMP_LABEL disabled, while the modules are built depending on
CONFIG_JUMP_LABEL.  If HAVE_JUMP_LABEL macro happens to be different, modules
are built with undefined references, e.g.:

ERROR: "static_key_slow_inc" [net/netfilter/xt_TEE.ko] undefined!
ERROR: "static_key_slow_dec" [net/netfilter/xt_TEE.ko] undefined!
ERROR: "static_key_slow_dec" [net/netfilter/nft_meta.ko] undefined!
ERROR: "static_key_slow_inc" [net/netfilter/nft_meta.ko] undefined!
ERROR: "nf_hooks_needed" [net/netfilter/ipvs/ip_vs.ko] undefined!
ERROR: "nf_hooks_needed" [net/ipv6/ipv6.ko] undefined!
ERROR: "static_key_count" [net/ipv6/ipv6.ko] undefined!
ERROR: "static_key_slow_inc" [net/ipv6/ipv6.ko] undefined!

This change moves the check before all these references are added
to KBUILD_CFLAGS.  This is correct because subsequent KBUILD_CFLAGS
modifications are not relevant to this check.

Reported-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Fixes: 35f860f9ba6a ("jump label: pass kbuild_cflags when checking for asm goto support")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/Makefile
+++ b/Makefile
@@ -651,6 +651,12 @@ KBUILD_CFLAGS += $(call cc-ifversion, -l
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
 include scripts/Makefile.gcc-plugins
 
 ifdef CONFIG_READABLE_ASM
@@ -796,12 +802,6 @@ KBUILD_CFLAGS   += $(call cc-option,-Wer
 # use the deterministic mode of AR if available
 KBUILD_ARFLAGS := $(call ar-option,D)
 
-# check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
-	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
-	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
-endif
-
 include scripts/Makefile.kasan
 include scripts/Makefile.extrawarn
 include scripts/Makefile.ubsan

[PATCH 4.9 44/44] brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit 35abcd4f9f303ac4f10f99b3f7e993e5f2e6fa37 upstream.

This fixes the following warning:

  drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function
  'brcmf_usb_probe_phase2':
  drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1198:2:
  warning: 'devinfo' may be used uninitialized in this function
  [-Wmaybe-uninitialized]
    mutex_unlock(&devinfo->dev_init_lock);

Fixes: 6d0507a777fb ("brcmfmac: add parameter to pass error code in firmware callback")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1163,14 +1163,13 @@ static void brcmf_usb_probe_phase2(struc
 				   void *nvram, u32 nvlen)
 {
 	struct brcmf_bus *bus = dev_get_drvdata(dev);
-	struct brcmf_usbdev_info *devinfo;
+	struct brcmf_usbdev_info *devinfo = bus->bus_priv.usb->devinfo;
 
 	if (ret)
 		goto error;
 
 	brcmf_dbg(USB, "Start fw downloading\n");
 
-	devinfo = bus->bus_priv.usb->devinfo;
 	ret = check_file(fw->data);
 	if (ret < 0) {
 		brcmf_err("invalid firmware\n");

Re: [PATCH 4.9 00/44] 4.9.35-stable review

[Sumit Semwal]

Hi Greg,

On 27 June 2017 at 19:42, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.9.35 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jun 29 14:10:54 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.35-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
Built with arm64 defconfig, and boot-tested on hikey. No regressions noted.

> thanks,
>
> greg k-h
>

Thanks,

Best,
Sumit.

Re: [PATCH 4.9 00/44] 4.9.35-stable review

[Greg Kroah-Hartman]

On Tue, Jun 27, 2017 at 10:59:48PM +0530, Sumit Semwal wrote:
> Hi Greg,
> 
> On 27 June 2017 at 19:42, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> > This is the start of the stable review cycle for the 4.9.35 release.
> > There are 44 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Jun 29 14:10:54 UTC 2017.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.35-rc1.gz
> > or in the git tree and branch at:
> >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > and the diffstat can be found below.
> >
> Built with arm64 defconfig, and boot-tested on hikey. No regressions noted.

Great, thanks for testing.

greg k-h

Re: [PATCH 4.9 00/44] 4.9.35-stable review

[Greg Kroah-Hartman]

On Tue, Jun 27, 2017 at 11:04:33AM -0700, kernelci.org bot wrote:
> stable-rc/linux-4.9.y boot: 445 boots: 0 failed, 440 passed with 5 offline (v4.9.34-44-g8041763f609c)

Wow that was fast!

Thanks for letting me know, that's really impressive.

greg k-h

Re: [PATCH 4.9 00/44] 4.9.35-stable review

[Guenter Roeck]

On Tue, Jun 27, 2017 at 04:12:12PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.35 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jun 29 14:10:54 UTC 2017.
> Anything received after that time might be too late.
> 
Build results:
	total: 145 pass: 145 fail: 0
Qemu test results:
	total: 122 pass: 122 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.9 00/44] 4.9.35-stable review

[Shuah Khan]

On 06/27/2017 08:12 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.35 release.
> There are 44 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jun 29 14:10:54 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.35-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah