* [PATCH 1/4] nvme-cli : add support for sanitize command.
2017-06-29 2:19 nvme-cli : Sanitize and Sanitize Log command support Chaitanya Kulkarni
@ 2017-06-29 2:19 ` Chaitanya Kulkarni
2017-06-29 16:44 ` Keith Busch
2017-06-29 2:19 ` [PATCH 2/4] nvme-cli : add sanitize command documentation Chaitanya Kulkarni
` (2 subsequent siblings)
3 siblings, 1 reply; 7+ messages in thread
From: Chaitanya Kulkarni @ 2017-06-29 2:19 UTC (permalink / raw)
This adds support for NVMe sanitize command execution including
NVMe status codes, command opcode and help text.
For more details please refer to NVM Express 1.3 specification.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni at hgst.com>
---
linux/nvme.h | 16 ++++++++++
nvme-builtin.h | 1 +
nvme-print.c | 2 ++
nvme.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 111 insertions(+)
diff --git a/linux/nvme.h b/linux/nvme.h
index c05d819..28ab9b8 100644
--- a/linux/nvme.h
+++ b/linux/nvme.h
@@ -660,6 +660,7 @@ enum nvme_admin_opcode {
nvme_admin_format_nvm = 0x80,
nvme_admin_security_send = 0x81,
nvme_admin_security_recv = 0x82,
+ nvme_admin_sanitize = 0x84,
};
enum {
@@ -697,6 +698,18 @@ enum {
NVME_FWACT_ACTV = (2 << 3),
};
+/* Sanitize */
+enum {
+ NVME_SANITIZE_NO_DEALLOC = 0x00000200,
+ NVME_SANITIZE_OIPBP = 0x00000100,
+ NVME_SANITIZE_OWPASS_SHIFT = 0x00000004,
+ NVME_SANITIZE_AUSE = 0x00000008,
+ NVME_SANITIZE_ACT_CRYPTO_ERASE = 0x00000004,
+ NVME_SANITIZE_ACT_OVERWRITE = 0x00000003,
+ NVME_SANITIZE_ACT_BLOCK_ERASE = 0x00000002,
+ NVME_SANITIZE_ACT_EXIT = 0x00000001,
+};
+
struct nvme_identify {
__u8 opcode;
__u8 flags;
@@ -1010,6 +1023,9 @@ enum {
NVME_SC_SGL_INVALID_OFFSET = 0x16,
NVME_SC_SGL_INVALID_SUBTYPE = 0x17,
+ NVME_SC_SANITIZE_FAILED = 0x1C,
+ NVME_SC_SANITIZE_IN_PROGRESS = 0x1D,
+
NVME_SC_LBA_RANGE = 0x80,
NVME_SC_CAP_EXCEEDED = 0x81,
NVME_SC_NS_NOT_READY = 0x82,
diff --git a/nvme-builtin.h b/nvme-builtin.h
index 2bb01cb..b4cd3ba 100644
--- a/nvme-builtin.h
+++ b/nvme-builtin.h
@@ -42,6 +42,7 @@ COMMAND_LIST(
ENTRY("write", "Submit a write command, return results", write_cmd)
ENTRY("write-zeroes", "Submit a write zeroes command, return results", write_zeroes)
ENTRY("write-uncor", "Submit a write uncorrectable command, return results", write_uncor)
+ ENTRY("sanitize", "Submit a sanitize command", sanitize)
ENTRY("reset", "Resets the controller", reset)
ENTRY("subsystem-reset", "Resets the controller", subsystem_reset)
ENTRY("show-regs", "Shows the controller registers. Requires admin character device", show_registers)
diff --git a/nvme-print.c b/nvme-print.c
index bf78d4a..f03382f 100644
--- a/nvme-print.c
+++ b/nvme-print.c
@@ -1102,6 +1102,8 @@ char *nvme_status_to_string(__u32 status)
case NVME_SC_FUSED_MISSING: return "FUSED_MISSING";
case NVME_SC_INVALID_NS: return "INVALID_NS";
case NVME_SC_CMD_SEQ_ERROR: return "CMD_SEQ_ERROR";
+ case NVME_SC_SANITIZE_FAILED: return "SANITIZE_FAILED";
+ case NVME_SC_SANITIZE_IN_PROGRESS: return "SANITIZE_IN_PROGRESS";
case NVME_SC_LBA_RANGE: return "LBA_RANGE";
case NVME_SC_CAP_EXCEEDED: return "CAP_EXCEEDED";
case NVME_SC_NS_NOT_READY: return "NS_NOT_READY";
diff --git a/nvme.c b/nvme.c
index 7e07ffd..8507cd3 100644
--- a/nvme.c
+++ b/nvme.c
@@ -1428,6 +1428,98 @@ static int reset(int argc, char **argv, struct command *cmd, struct plugin *plug
return err;
}
+static int sanitize(int argc, char **argv, struct command *cmd, struct plugin *plugin)
+{
+ char *desc = "Send a sanitize command.";
+ char *no_dealloc_desc = "No deallocate after sanitize.";
+ char *oipbp_desc = "Overwrite invert pattern between passes.";
+ char *owpass_desc = "Overwrite pass count.";
+ char *ause_desc = "Allow unrestricted sanitize exit.";
+ char *sanact_desc = "Sanitize action.";
+ char *ovrpat_desc = "Overwrite pattern.";
+
+ int fd;
+ int ret;
+ __u32 sanitize_cdw10 = 0;
+ __u32 sanitize_cdw11 = 0;
+
+ struct nvme_passthru_cmd admin_cmd;
+
+ struct config {
+ uint8_t no_dealloc;
+ uint8_t oipbp;
+ uint8_t owpass;
+ uint8_t ause;
+ uint8_t sanact;
+ uint32_t ovrpat;
+ };
+
+ struct config cfg = {
+ .no_dealloc = 0,
+ .oipbp = 0,
+ .owpass = 0,
+ .ause = 0,
+ .sanact = 0,
+ .ovrpat = 0,
+ };
+
+ const struct argconfig_commandline_options command_line_options[] = {
+ {"no_dealloc", 'd', "", CFG_NONE, &cfg.no_dealloc, no_argument, no_dealloc_desc},
+ {"oipbp", 'i', "", CFG_NONE, &cfg.oipbp, no_argument, oipbp_desc},
+ {"owpass", 'n', "NUM", CFG_POSITIVE, &cfg.owpass, required_argument, owpass_desc},
+ {"ause", 'u', "", CFG_NONE, &cfg.ause, no_argument, ause_desc},
+ {"sanact", 'a', "NUM", CFG_POSITIVE, &cfg.sanact, required_argument, sanact_desc},
+ {"ovrpat", 'p', "NUM", CFG_POSITIVE, &cfg.ovrpat, required_argument, ovrpat_desc},
+ {NULL}
+ };
+
+ fd = parse_and_open(argc, argv, desc, command_line_options, NULL, 0);
+ if (fd < 0)
+ return fd;
+
+ switch (cfg.sanact) {
+ case NVME_SANITIZE_ACT_CRYPTO_ERASE:
+ case NVME_SANITIZE_ACT_BLOCK_ERASE:
+ case NVME_SANITIZE_ACT_EXIT:
+ sanitize_cdw10 = cfg.sanact;
+ break;
+ case NVME_SANITIZE_ACT_OVERWRITE:
+ sanitize_cdw10 = cfg.sanact;
+ sanitize_cdw11 = cfg.ovrpat;
+ break;
+ default:
+ fprintf(stderr, "Invalid Sanitize Action\n");
+ return -1;
+ }
+
+ if (cfg.ause)
+ sanitize_cdw10 |= NVME_SANITIZE_AUSE;
+
+ if (cfg.sanact == NVME_SANITIZE_ACT_OVERWRITE) {
+ if (cfg.owpass >= 0 && cfg.owpass <= 16) {
+ sanitize_cdw10 |= (cfg.owpass << NVME_SANITIZE_OWPASS_SHIFT);
+ } else {
+ fprintf(stderr, "owpass out of range [0-16] or sanitize action is not set to overwrite\n");
+ return -1;
+ }
+ if (cfg.oipbp)
+ sanitize_cdw10 |= NVME_SANITIZE_OIPBP;
+ }
+
+ if (cfg.sanact != NVME_SANITIZE_ACT_EXIT && cfg.no_dealloc)
+ sanitize_cdw10 |= NVME_SANITIZE_NO_DEALLOC;
+
+ memset(&admin_cmd, 0, sizeof (admin_cmd));
+ admin_cmd.opcode = nvme_admin_sanitize;
+ admin_cmd.cdw10 = sanitize_cdw10;
+ admin_cmd.cdw11 = sanitize_cdw11;
+
+ ret = nvme_submit_passthru(fd, NVME_IOCTL_ADMIN_CMD, &admin_cmd);
+
+ fprintf(stderr, "NVMe Status:%s(%x)\n", nvme_status_to_string(ret), ret);
+ return ret;
+}
+
static int show_registers(int argc, char **argv, struct command *cmd, struct plugin *plugin)
{
const char *desc = "Reads and shows the defined NVMe controller registers "\
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 1/4] nvme-cli : add support for sanitize command.
2017-06-29 2:19 ` [PATCH 1/4] nvme-cli : add support for sanitize command Chaitanya Kulkarni
@ 2017-06-29 16:44 ` Keith Busch
2017-06-29 17:43 ` Keith Busch
0 siblings, 1 reply; 7+ messages in thread
From: Keith Busch @ 2017-06-29 16:44 UTC (permalink / raw)
On Wed, Jun 28, 2017@07:19:25PM -0700, Chaitanya Kulkarni wrote:
> + const struct argconfig_commandline_options command_line_options[] = {
> + {"no_dealloc", 'd', "", CFG_NONE, &cfg.no_dealloc, no_argument, no_dealloc_desc},
Just a minor request, this tool uses '-' instead of '_' for compound
word long options, and I think keeping that consistency is a good thing.
Otherwise, this looks great.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/4] nvme-cli : add support for sanitize command.
2017-06-29 16:44 ` Keith Busch
@ 2017-06-29 17:43 ` Keith Busch
0 siblings, 0 replies; 7+ messages in thread
From: Keith Busch @ 2017-06-29 17:43 UTC (permalink / raw)
On Thu, Jun 29, 2017@12:44:43PM -0400, Keith Busch wrote:
> On Wed, Jun 28, 2017@07:19:25PM -0700, Chaitanya Kulkarni wrote:
> > + const struct argconfig_commandline_options command_line_options[] = {
> > + {"no_dealloc", 'd', "", CFG_NONE, &cfg.no_dealloc, no_argument, no_dealloc_desc},
>
> Just a minor request, this tool uses '-' instead of '_' for compound
> word long options, and I think keeping that consistency is a good thing.
Ah, it was just this one that used '_'. The documentation used '-'
already. I made the fix in this patch and applied all of them.
Thanks!
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/4] nvme-cli : add sanitize command documentation.
2017-06-29 2:19 nvme-cli : Sanitize and Sanitize Log command support Chaitanya Kulkarni
2017-06-29 2:19 ` [PATCH 1/4] nvme-cli : add support for sanitize command Chaitanya Kulkarni
@ 2017-06-29 2:19 ` Chaitanya Kulkarni
2017-06-29 2:19 ` [PATCH 3/4] nvme-cli : add support for retrieving sanitize log Chaitanya Kulkarni
2017-06-29 2:19 ` [PATCH 4/4] nvme-cli : add sanitize-log command documentation Chaitanya Kulkarni
3 siblings, 0 replies; 7+ messages in thread
From: Chaitanya Kulkarni @ 2017-06-29 2:19 UTC (permalink / raw)
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni at hgst.com>
---
Documentation/nvme-sanitize.1 | 105 +++++
Documentation/nvme-sanitize.html | 903 +++++++++++++++++++++++++++++++++++++++
Documentation/nvme-sanitize.txt | 93 ++++
3 files changed, 1101 insertions(+)
create mode 100644 Documentation/nvme-sanitize.1
create mode 100644 Documentation/nvme-sanitize.html
create mode 100644 Documentation/nvme-sanitize.txt
diff --git a/Documentation/nvme-sanitize.1 b/Documentation/nvme-sanitize.1
new file mode 100644
index 0000000..d984acd
--- /dev/null
+++ b/Documentation/nvme-sanitize.1
@@ -0,0 +1,105 @@
+'\" t
+.\" Title: nvme-sanitize
+.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.79.1 <http://docbook.sf.net/>
+.\" Date: 06/28/2017
+.\" Manual: NVMe Manual
+.\" Source: NVMe
+.\" Language: English
+.\"
+.TH "NVME\-SANITIZE" "1" "06/28/2017" "NVMe" "NVMe Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nvme-sanitize \- Send NVMe Sanitize Command, return result
+.SH "SYNOPSIS"
+.sp
+.nf
+\fInvme sanitize\fR <device> [\-\-no\-dealloc | \-d]
+ [\-\-oipbp | \-i]
+ [\-\-owpass=<overwrite\-pass\-count> | \-n <overwrite\-pass\-count>]
+ [\-\-ause | \-u]
+ [\-\-sanact=<action> | \-a <action>]
+ [\-\-ovrpat=<overwrite\-pattern> | \-p <overwrite\-pattern>]
+.fi
+.SH "DESCRIPTION"
+.sp
+For the NVMe device given, sends a Sanitize command and provides the result\&.
+.sp
+The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0)\&.
+.sp
+On success it returns 0, error code otherwise\&.
+.SH "OPTIONS"
+.PP
+\-d, \-\-no\-delloc
+.RS 4
+No Deallocate After Sanitize: If set, then the controller shall not deallocate any logical blocks as a result of successfully completing the sanitize operation\&. If cleared, then the controller should deallocate logical blocks as a result of successfully completing the sanitize operation\&. This bit shall be ignored if the Sanitize Action field is set to 001b (i\&.e\&., Exit Failure Mode)\&.
+.RE
+.PP
+\-i, \-\-oipbp
+.RS 4
+Overwrite Invert Pattern Between Passes: If set, then the Overwrite Pattern shall be inverted between passes\&. If cleared, then the overwrite pattern shall not be inverted between passes\&. This bit shall be ignored unless the Sanitize Action field is set to 011b (i\&.e\&., Overwrite)\&.
+.RE
+.PP
+\-n <overwrite\-pass\-count>, \-\-owpass=<overwrite\-pass\-count>
+.RS 4
+Overwrite Pass Count: This field specifies the number of overwrite passes (i\&.e\&., how many times the media is to be overwritten) using the data from the Overwrite Pattern field of this command\&. A value of 0 specifies 16 overwrite passes\&. This field shall be ignored unless the Sanitize Action field is set to 011b (i\&.e\&., Overwrite)\&.
+.RE
+.PP
+\-u, \-\-ause
+.RS 4
+Allow Unrestricted Sanitize Exit: If set, then the sanitize operation is performed in unrestricted completion mode\&. If cleared then the sanitize operation is performed in restricted completion mode\&. This bit shall be ignored if the Sanitize Action field is set to 001b (i\&.e\&., Exit Failure Mode)\&.
+.RE
+.PP
+\-a <action>, \-\-sanact=<action>
+.RS 4
+Sanitize Action: 000b \- Reserved 001b \- Exit Failure Mode 010b \- Start a Block Erase sanitize operation 011b \- Start an Overwrite sanitize operation 100b \- Start a Crypto Erase sanitize operation
+.RE
+.PP
+\-p <overwrite\-pattern>, \-\-ovrpat=<overwrite\-pattern>
+.RS 4
+Overwrite Pattern: This field is ignored unless the Sanitize Action field in Command Dword 10 is set to 011b (i\&.e\&., Overwrite)\&. This field specifies a 32\-bit pattern that is used for the Overwrite sanitize operation\&.
+.RE
+.SH "EXAMPLES"
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+Has the program issue Sanitize Command :
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# nvme sanitize /dev/nvme0n1 \-a 0x02
+# nvme sanitize /dev/nvme0n1 \-\-sanact=0x01
+.fi
+.if n \{\
+.RE
+.\}
+.RE
+.SH "NVME"
+.sp
+Part of the nvme\-user suite\&.
diff --git a/Documentation/nvme-sanitize.html b/Documentation/nvme-sanitize.html
new file mode 100644
index 0000000..9612e06
--- /dev/null
+++ b/Documentation/nvme-sanitize.html
@@ -0,0 +1,903 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN"
+ "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+<head>
+<meta http-equiv="Content-Type" content="application/xhtml+xml; charset=UTF-8" />
+<meta name="generator" content="AsciiDoc 8.6.9" />
+<title>nvme-sanitize(1)</title>
+<style type="text/css">
+/* Shared CSS for AsciiDoc xhtml11 and html5 backends */
+
+/* Default font. */
+body {
+ font-family: Georgia,serif;
+}
+
+/* Title font. */
+h1, h2, h3, h4, h5, h6,
+div.title, caption.title,
+thead, p.table.header,
+#toctitle,
+#author, #revnumber, #revdate, #revremark,
+#footer {
+ font-family: Arial,Helvetica,sans-serif;
+}
+
+body {
+ margin: 1em 5% 1em 5%;
+}
+
+a {
+ color: blue;
+ text-decoration: underline;
+}
+a:visited {
+ color: fuchsia;
+}
+
+em {
+ font-style: italic;
+ color: navy;
+}
+
+strong {
+ font-weight: bold;
+ color: #083194;
+}
+
+h1, h2, h3, h4, h5, h6 {
+ color: #527bbd;
+ margin-top: 1.2em;
+ margin-bottom: 0.5em;
+ line-height: 1.3;
+}
+
+h1, h2, h3 {
+ border-bottom: 2px solid silver;
+}
+h2 {
+ padding-top: 0.5em;
+}
+h3 {
+ float: left;
+}
+h3 + * {
+ clear: left;
+}
+h5 {
+ font-size: 1.0em;
+}
+
+div.sectionbody {
+ margin-left: 0;
+}
+
+hr {
+ border: 1px solid silver;
+}
+
+p {
+ margin-top: 0.5em;
+ margin-bottom: 0.5em;
+}
+
+ul, ol, li > p {
+ margin-top: 0;
+}
+ul > li { color: #aaa; }
+ul > li > * { color: black; }
+
+.monospaced, code, pre {
+ font-family: "Courier New", Courier, monospace;
+ font-size: inherit;
+ color: navy;
+ padding: 0;
+ margin: 0;
+}
+pre {
+ white-space: pre-wrap;
+}
+
+#author {
+ color: #527bbd;
+ font-weight: bold;
+ font-size: 1.1em;
+}
+#email {
+}
+#revnumber, #revdate, #revremark {
+}
+
+#footer {
+ font-size: small;
+ border-top: 2px solid silver;
+ padding-top: 0.5em;
+ margin-top: 4.0em;
+}
+#footer-text {
+ float: left;
+ padding-bottom: 0.5em;
+}
+#footer-badges {
+ float: right;
+ padding-bottom: 0.5em;
+}
+
+#preamble {
+ margin-top: 1.5em;
+ margin-bottom: 1.5em;
+}
+div.imageblock, div.exampleblock, div.verseblock,
+div.quoteblock, div.literalblock, div.listingblock, div.sidebarblock,
+div.admonitionblock {
+ margin-top: 1.0em;
+ margin-bottom: 1.5em;
+}
+div.admonitionblock {
+ margin-top: 2.0em;
+ margin-bottom: 2.0em;
+ margin-right: 10%;
+ color: #606060;
+}
+
+div.content { /* Block element content. */
+ padding: 0;
+}
+
+/* Block element titles. */
+div.title, caption.title {
+ color: #527bbd;
+ font-weight: bold;
+ text-align: left;
+ margin-top: 1.0em;
+ margin-bottom: 0.5em;
+}
+div.title + * {
+ margin-top: 0;
+}
+
+td div.title:first-child {
+ margin-top: 0.0em;
+}
+div.content div.title:first-child {
+ margin-top: 0.0em;
+}
+div.content + div.title {
+ margin-top: 0.0em;
+}
+
+div.sidebarblock > div.content {
+ background: #ffffee;
+ border: 1px solid #dddddd;
+ border-left: 4px solid #f0f0f0;
+ padding: 0.5em;
+}
+
+div.listingblock > div.content {
+ border: 1px solid #dddddd;
+ border-left: 5px solid #f0f0f0;
+ background: #f8f8f8;
+ padding: 0.5em;
+}
+
+div.quoteblock, div.verseblock {
+ padding-left: 1.0em;
+ margin-left: 1.0em;
+ margin-right: 10%;
+ border-left: 5px solid #f0f0f0;
+ color: #888;
+}
+
+div.quoteblock > div.attribution {
+ padding-top: 0.5em;
+ text-align: right;
+}
+
+div.verseblock > pre.content {
+ font-family: inherit;
+ font-size: inherit;
+}
+div.verseblock > div.attribution {
+ padding-top: 0.75em;
+ text-align: left;
+}
+/* DEPRECATED: Pre version 8.2.7 verse style literal block. */
+div.verseblock + div.attribution {
+ text-align: left;
+}
+
+div.admonitionblock .icon {
+ vertical-align: top;
+ font-size: 1.1em;
+ font-weight: bold;
+ text-decoration: underline;
+ color: #527bbd;
+ padding-right: 0.5em;
+}
+div.admonitionblock td.content {
+ padding-left: 0.5em;
+ border-left: 3px solid #dddddd;
+}
+
+div.exampleblock > div.content {
+ border-left: 3px solid #dddddd;
+ padding-left: 0.5em;
+}
+
+div.imageblock div.content { padding-left: 0; }
+span.image img { border-style: none; vertical-align: text-bottom; }
+a.image:visited { color: white; }
+
+dl {
+ margin-top: 0.8em;
+ margin-bottom: 0.8em;
+}
+dt {
+ margin-top: 0.5em;
+ margin-bottom: 0;
+ font-style: normal;
+ color: navy;
+}
+dd > *:first-child {
+ margin-top: 0.1em;
+}
+
+ul, ol {
+ list-style-position: outside;
+}
+ol.arabic {
+ list-style-type: decimal;
+}
+ol.loweralpha {
+ list-style-type: lower-alpha;
+}
+ol.upperalpha {
+ list-style-type: upper-alpha;
+}
+ol.lowerroman {
+ list-style-type: lower-roman;
+}
+ol.upperroman {
+ list-style-type: upper-roman;
+}
+
+div.compact ul, div.compact ol,
+div.compact p, div.compact p,
+div.compact div, div.compact div {
+ margin-top: 0.1em;
+ margin-bottom: 0.1em;
+}
+
+tfoot {
+ font-weight: bold;
+}
+td > div.verse {
+ white-space: pre;
+}
+
+div.hdlist {
+ margin-top: 0.8em;
+ margin-bottom: 0.8em;
+}
+div.hdlist tr {
+ padding-bottom: 15px;
+}
+dt.hdlist1.strong, td.hdlist1.strong {
+ font-weight: bold;
+}
+td.hdlist1 {
+ vertical-align: top;
+ font-style: normal;
+ padding-right: 0.8em;
+ color: navy;
+}
+td.hdlist2 {
+ vertical-align: top;
+}
+div.hdlist.compact tr {
+ margin: 0;
+ padding-bottom: 0;
+}
+
+.comment {
+ background: yellow;
+}
+
+.footnote, .footnoteref {
+ font-size: 0.8em;
+}
+
+span.footnote, span.footnoteref {
+ vertical-align: super;
+}
+
+#footnotes {
+ margin: 20px 0 20px 0;
+ padding: 7px 0 0 0;
+}
+
+#footnotes div.footnote {
+ margin: 0 0 5px 0;
+}
+
+#footnotes hr {
+ border: none;
+ border-top: 1px solid silver;
+ height: 1px;
+ text-align: left;
+ margin-left: 0;
+ width: 20%;
+ min-width: 100px;
+}
+
+div.colist td {
+ padding-right: 0.5em;
+ padding-bottom: 0.3em;
+ vertical-align: top;
+}
+div.colist td img {
+ margin-top: 0.3em;
+}
+
+ at media print {
+ #footer-badges { display: none; }
+}
+
+#toc {
+ margin-bottom: 2.5em;
+}
+
+#toctitle {
+ color: #527bbd;
+ font-size: 1.1em;
+ font-weight: bold;
+ margin-top: 1.0em;
+ margin-bottom: 0.1em;
+}
+
+div.toclevel0, div.toclevel1, div.toclevel2, div.toclevel3, div.toclevel4 {
+ margin-top: 0;
+ margin-bottom: 0;
+}
+div.toclevel2 {
+ margin-left: 2em;
+ font-size: 0.9em;
+}
+div.toclevel3 {
+ margin-left: 4em;
+ font-size: 0.9em;
+}
+div.toclevel4 {
+ margin-left: 6em;
+ font-size: 0.9em;
+}
+
+span.aqua { color: aqua; }
+span.black { color: black; }
+span.blue { color: blue; }
+span.fuchsia { color: fuchsia; }
+span.gray { color: gray; }
+span.green { color: green; }
+span.lime { color: lime; }
+span.maroon { color: maroon; }
+span.navy { color: navy; }
+span.olive { color: olive; }
+span.purple { color: purple; }
+span.red { color: red; }
+span.silver { color: silver; }
+span.teal { color: teal; }
+span.white { color: white; }
+span.yellow { color: yellow; }
+
+span.aqua-background { background: aqua; }
+span.black-background { background: black; }
+span.blue-background { background: blue; }
+span.fuchsia-background { background: fuchsia; }
+span.gray-background { background: gray; }
+span.green-background { background: green; }
+span.lime-background { background: lime; }
+span.maroon-background { background: maroon; }
+span.navy-background { background: navy; }
+span.olive-background { background: olive; }
+span.purple-background { background: purple; }
+span.red-background { background: red; }
+span.silver-background { background: silver; }
+span.teal-background { background: teal; }
+span.white-background { background: white; }
+span.yellow-background { background: yellow; }
+
+span.big { font-size: 2em; }
+span.small { font-size: 0.6em; }
+
+span.underline { text-decoration: underline; }
+span.overline { text-decoration: overline; }
+span.line-through { text-decoration: line-through; }
+
+div.unbreakable { page-break-inside: avoid; }
+
+
+/*
+ * xhtml11 specific
+ *
+ * */
+
+div.tableblock {
+ margin-top: 1.0em;
+ margin-bottom: 1.5em;
+}
+div.tableblock > table {
+ border: 3px solid #527bbd;
+}
+thead, p.table.header {
+ font-weight: bold;
+ color: #527bbd;
+}
+p.table {
+ margin-top: 0;
+}
+/* Because the table frame attribute is overriden by CSS in most browsers. */
+div.tableblock > table[frame="void"] {
+ border-style: none;
+}
+div.tableblock > table[frame="hsides"] {
+ border-left-style: none;
+ border-right-style: none;
+}
+div.tableblock > table[frame="vsides"] {
+ border-top-style: none;
+ border-bottom-style: none;
+}
+
+
+/*
+ * html5 specific
+ *
+ * */
+
+table.tableblock {
+ margin-top: 1.0em;
+ margin-bottom: 1.5em;
+}
+thead, p.tableblock.header {
+ font-weight: bold;
+ color: #527bbd;
+}
+p.tableblock {
+ margin-top: 0;
+}
+table.tableblock {
+ border-width: 3px;
+ border-spacing: 0px;
+ border-style: solid;
+ border-color: #527bbd;
+ border-collapse: collapse;
+}
+th.tableblock, td.tableblock {
+ border-width: 1px;
+ padding: 4px;
+ border-style: solid;
+ border-color: #527bbd;
+}
+
+table.tableblock.frame-topbot {
+ border-left-style: hidden;
+ border-right-style: hidden;
+}
+table.tableblock.frame-sides {
+ border-top-style: hidden;
+ border-bottom-style: hidden;
+}
+table.tableblock.frame-none {
+ border-style: hidden;
+}
+
+th.tableblock.halign-left, td.tableblock.halign-left {
+ text-align: left;
+}
+th.tableblock.halign-center, td.tableblock.halign-center {
+ text-align: center;
+}
+th.tableblock.halign-right, td.tableblock.halign-right {
+ text-align: right;
+}
+
+th.tableblock.valign-top, td.tableblock.valign-top {
+ vertical-align: top;
+}
+th.tableblock.valign-middle, td.tableblock.valign-middle {
+ vertical-align: middle;
+}
+th.tableblock.valign-bottom, td.tableblock.valign-bottom {
+ vertical-align: bottom;
+}
+
+
+/*
+ * manpage specific
+ *
+ * */
+
+body.manpage h1 {
+ padding-top: 0.5em;
+ padding-bottom: 0.5em;
+ border-top: 2px solid silver;
+ border-bottom: 2px solid silver;
+}
+body.manpage h2 {
+ border-style: none;
+}
+body.manpage div.sectionbody {
+ margin-left: 3em;
+}
+
+ at media print {
+ body.manpage div#toc { display: none; }
+}
+
+
+</style>
+<script type="text/javascript">
+/*<![CDATA[*/
+var asciidoc = { // Namespace.
+
+/////////////////////////////////////////////////////////////////////
+// Table Of Contents generator
+/////////////////////////////////////////////////////////////////////
+
+/* Author: Mihai Bazon, September 2002
+ * http://students.infoiasi.ro/~mishoo
+ *
+ * Table Of Content generator
+ * Version: 0.4
+ *
+ * Feel free to use this script under the terms of the GNU General Public
+ * License, as long as you do not remove or alter this notice.
+ */
+
+ /* modified by Troy D. Hanson, September 2006. License: GPL */
+ /* modified by Stuart Rackham, 2006, 2009. License: GPL */
+
+// toclevels = 1..4.
+toc: function (toclevels) {
+
+ function getText(el) {
+ var text = "";
+ for (var i = el.firstChild; i != null; i = i.nextSibling) {
+ if (i.nodeType == 3 /* Node.TEXT_NODE */) // IE doesn't speak constants.
+ text += i.data;
+ else if (i.firstChild != null)
+ text += getText(i);
+ }
+ return text;
+ }
+
+ function TocEntry(el, text, toclevel) {
+ this.element = el;
+ this.text = text;
+ this.toclevel = toclevel;
+ }
+
+ function tocEntries(el, toclevels) {
+ var result = new Array;
+ var re = new RegExp('[hH]([1-'+(toclevels+1)+'])');
+ // Function that scans the DOM tree for header elements (the DOM2
+ // nodeIterator API would be a better technique but not supported by all
+ // browsers).
+ var iterate = function (el) {
+ for (var i = el.firstChild; i != null; i = i.nextSibling) {
+ if (i.nodeType == 1 /* Node.ELEMENT_NODE */) {
+ var mo = re.exec(i.tagName);
+ if (mo && (i.getAttribute("class") || i.getAttribute("className")) != "float") {
+ result[result.length] = new TocEntry(i, getText(i), mo[1]-1);
+ }
+ iterate(i);
+ }
+ }
+ }
+ iterate(el);
+ return result;
+ }
+
+ var toc = document.getElementById("toc");
+ if (!toc) {
+ return;
+ }
+
+ // Delete existing TOC entries in case we're reloading the TOC.
+ var tocEntriesToRemove = [];
+ var i;
+ for (i = 0; i < toc.childNodes.length; i++) {
+ var entry = toc.childNodes[i];
+ if (entry.nodeName.toLowerCase() == 'div'
+ && entry.getAttribute("class")
+ && entry.getAttribute("class").match(/^toclevel/))
+ tocEntriesToRemove.push(entry);
+ }
+ for (i = 0; i < tocEntriesToRemove.length; i++) {
+ toc.removeChild(tocEntriesToRemove[i]);
+ }
+
+ // Rebuild TOC entries.
+ var entries = tocEntries(document.getElementById("content"), toclevels);
+ for (var i = 0; i < entries.length; ++i) {
+ var entry = entries[i];
+ if (entry.element.id == "")
+ entry.element.id = "_toc_" + i;
+ var a = document.createElement("a");
+ a.href = "#" + entry.element.id;
+ a.appendChild(document.createTextNode(entry.text));
+ var div = document.createElement("div");
+ div.appendChild(a);
+ div.className = "toclevel" + entry.toclevel;
+ toc.appendChild(div);
+ }
+ if (entries.length == 0)
+ toc.parentNode.removeChild(toc);
+},
+
+
+/////////////////////////////////////////////////////////////////////
+// Footnotes generator
+/////////////////////////////////////////////////////////////////////
+
+/* Based on footnote generation code from:
+ * http://www.brandspankingnew.net/archive/2005/07/format_footnote.html
+ */
+
+footnotes: function () {
+ // Delete existing footnote entries in case we're reloading the footnodes.
+ var i;
+ var noteholder = document.getElementById("footnotes");
+ if (!noteholder) {
+ return;
+ }
+ var entriesToRemove = [];
+ for (i = 0; i < noteholder.childNodes.length; i++) {
+ var entry = noteholder.childNodes[i];
+ if (entry.nodeName.toLowerCase() == 'div' && entry.getAttribute("class") == "footnote")
+ entriesToRemove.push(entry);
+ }
+ for (i = 0; i < entriesToRemove.length; i++) {
+ noteholder.removeChild(entriesToRemove[i]);
+ }
+
+ // Rebuild footnote entries.
+ var cont = document.getElementById("content");
+ var spans = cont.getElementsByTagName("span");
+ var refs = {};
+ var n = 0;
+ for (i=0; i<spans.length; i++) {
+ if (spans[i].className == "footnote") {
+ n++;
+ var note = spans[i].getAttribute("data-note");
+ if (!note) {
+ // Use [\s\S] in place of . so multi-line matches work.
+ // Because JavaScript has no s (dotall) regex flag.
+ note = spans[i].innerHTML.match(/\s*\[([\s\S]*)]\s*/)[1];
+ spans[i].innerHTML =
+ "[<a id='_footnoteref_" + n + "' href='#_footnote_" + n +
+ "' title='View footnote' class='footnote'>" + n + "</a>]";
+ spans[i].setAttribute("data-note", note);
+ }
+ noteholder.innerHTML +=
+ "<div class='footnote' id='_footnote_" + n + "'>" +
+ "<a href='#_footnoteref_" + n + "' title='Return to text'>" +
+ n + "</a>. " + note + "</div>";
+ var id =spans[i].getAttribute("id");
+ if (id != null) refs["#"+id] = n;
+ }
+ }
+ if (n == 0)
+ noteholder.parentNode.removeChild(noteholder);
+ else {
+ // Process footnoterefs.
+ for (i=0; i<spans.length; i++) {
+ if (spans[i].className == "footnoteref") {
+ var href = spans[i].getElementsByTagName("a")[0].getAttribute("href");
+ href = href.match(/#.*/)[0]; // Because IE return full URL.
+ n = refs[href];
+ spans[i].innerHTML =
+ "[<a href='#_footnote_" + n +
+ "' title='View footnote' class='footnote'>" + n + "</a>]";
+ }
+ }
+ }
+},
+
+install: function(toclevels) {
+ var timerId;
+
+ function reinstall() {
+ asciidoc.footnotes();
+ if (toclevels) {
+ asciidoc.toc(toclevels);
+ }
+ }
+
+ function reinstallAndRemoveTimer() {
+ clearInterval(timerId);
+ reinstall();
+ }
+
+ timerId = setInterval(reinstall, 500);
+ if (document.addEventListener)
+ document.addEventListener("DOMContentLoaded", reinstallAndRemoveTimer, false);
+ else
+ window.onload = reinstallAndRemoveTimer;
+}
+
+}
+asciidoc.install();
+/*]]>*/
+</script>
+</head>
+<body class="manpage">
+<div id="header">
+<h1>
+nvme-sanitize(1) Manual Page
+</h1>
+<h2>NAME</h2>
+<div class="sectionbody">
+<p>nvme-sanitize -
+ Send NVMe Sanitize Command, return result
+</p>
+</div>
+</div>
+<div id="content">
+<div class="sect1">
+<h2 id="_synopsis">SYNOPSIS</h2>
+<div class="sectionbody">
+<div class="verseblock">
+<pre class="content"><em>nvme sanitize</em> <device> [--no-dealloc | -d]
+ [--oipbp | -i]
+ [--owpass=<overwrite-pass-count> | -n <overwrite-pass-count>]
+ [--ause | -u]
+ [--sanact=<action> | -a <action>]
+ [--ovrpat=<overwrite-pattern> | -p <overwrite-pattern>]</pre>
+<div class="attribution">
+</div></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_description">DESCRIPTION</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>For the NVMe device given, sends a Sanitize command and
+provides the result.</p></div>
+<div class="paragraph"><p>The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0).</p></div>
+<div class="paragraph"><p>On success it returns 0, error code otherwise.</p></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_options">OPTIONS</h2>
+<div class="sectionbody">
+<div class="dlist"><dl>
+<dt class="hdlist1">
+-d
+</dt>
+<dt class="hdlist1">
+--no-delloc
+</dt>
+<dd>
+<p>
+ No Deallocate After Sanitize:
+ If set, then the controller shall not deallocate any logical
+ blocks as a result of successfully completing the sanitize
+ operation. If cleared, then the controller should deallocate
+ logical blocks as a result of successfully completing the
+ sanitize operation. This bit shall be ignored if the Sanitize
+ Action field is set to 001b (i.e., Exit Failure Mode).
+</p>
+</dd>
+<dt class="hdlist1">
+-i
+</dt>
+<dt class="hdlist1">
+--oipbp
+</dt>
+<dd>
+<p>
+ Overwrite Invert Pattern Between Passes:
+ If set, then the Overwrite Pattern shall be inverted between
+ passes. If cleared, then the overwrite pattern shall not be
+ inverted between passes. This bit shall be ignored unless the
+ Sanitize Action field is set to 011b (i.e., Overwrite).
+</p>
+</dd>
+<dt class="hdlist1">
+-n <overwrite-pass-count>
+</dt>
+<dt class="hdlist1">
+--owpass=<overwrite-pass-count>
+</dt>
+<dd>
+<p>
+ Overwrite Pass Count:
+ This field specifies the number of overwrite passes (i.e.,
+ how many times the media is to be overwritten) using the data
+ from the Overwrite Pattern field of this command. A value of 0
+ specifies 16 overwrite passes. This field shall be ignored
+ unless the Sanitize Action field is set to 011b (i.e., Overwrite).
+</p>
+</dd>
+<dt class="hdlist1">
+-u
+</dt>
+<dt class="hdlist1">
+--ause
+</dt>
+<dd>
+<p>
+ Allow Unrestricted Sanitize Exit:
+ If set, then the sanitize operation is performed in unrestricted
+ completion mode. If cleared then the sanitize operation is
+ performed in restricted completion mode. This bit shall be ignored
+ if the Sanitize Action field is set to 001b (i.e., Exit Failure Mode).
+</p>
+</dd>
+<dt class="hdlist1">
+-a <action>
+</dt>
+<dt class="hdlist1">
+--sanact=<action>
+</dt>
+<dd>
+<p>
+ Sanitize Action:
+ 000b - Reserved
+ 001b - Exit Failure Mode
+ 010b - Start a Block Erase sanitize operation
+ 011b - Start an Overwrite sanitize operation
+ 100b - Start a Crypto Erase sanitize operation
+</p>
+</dd>
+<dt class="hdlist1">
+-p <overwrite-pattern>
+</dt>
+<dt class="hdlist1">
+--ovrpat=<overwrite-pattern>
+</dt>
+<dd>
+<p>
+ Overwrite Pattern:
+ This field is ignored unless the Sanitize Action field in
+ Command Dword 10 is set to 011b (i.e., Overwrite). This field
+ specifies a 32-bit pattern that is used for the Overwrite
+ sanitize operation.
+</p>
+</dd>
+</dl></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_examples">EXAMPLES</h2>
+<div class="sectionbody">
+<div class="ulist"><ul>
+<li>
+<p>
+Has the program issue Sanitize Command :
+</p>
+<div class="listingblock">
+<div class="content">
+<pre><code># nvme sanitize /dev/nvme0n1 -a 0x02
+# nvme sanitize /dev/nvme0n1 --sanact=0x01</code></pre>
+</div></div>
+</li>
+</ul></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_nvme">NVME</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>Part of the nvme-user suite.</p></div>
+</div>
+</div>
+</div>
+<div id="footnotes"><hr /></div>
+<div id="footer">
+<div id="footer-text">
+Last updated
+ 2017-06-28 18:52:37 PDT
+</div>
+</div>
+</body>
+</html>
diff --git a/Documentation/nvme-sanitize.txt b/Documentation/nvme-sanitize.txt
new file mode 100644
index 0000000..b1d9a0e
--- /dev/null
+++ b/Documentation/nvme-sanitize.txt
@@ -0,0 +1,93 @@
+nvme-sanitize(1)
+================
+
+NAME
+----
+nvme-sanitize - Send NVMe Sanitize Command, return result
+
+SYNOPSIS
+--------
+[verse]
+'nvme sanitize' <device> [--no-dealloc | -d]
+ [--oipbp | -i]
+ [--owpass=<overwrite-pass-count> | -n <overwrite-pass-count>]
+ [--ause | -u]
+ [--sanact=<action> | -a <action>]
+ [--ovrpat=<overwrite-pattern> | -p <overwrite-pattern>]
+
+DESCRIPTION
+-----------
+For the NVMe device given, sends a Sanitize command and
+provides the result.
+
+The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0).
+
+On success it returns 0, error code otherwise.
+
+OPTIONS
+-------
+-d::
+--no-delloc::
+ No Deallocate After Sanitize:
+ If set, then the controller shall not deallocate any logical
+ blocks as a result of successfully completing the sanitize
+ operation. If cleared, then the controller should deallocate
+ logical blocks as a result of successfully completing the
+ sanitize operation. This bit shall be ignored if the Sanitize
+ Action field is set to 001b (i.e., Exit Failure Mode).
+
+-i::
+--oipbp::
+ Overwrite Invert Pattern Between Passes:
+ If set, then the Overwrite Pattern shall be inverted between
+ passes. If cleared, then the overwrite pattern shall not be
+ inverted between passes. This bit shall be ignored unless the
+ Sanitize Action field is set to 011b (i.e., Overwrite).
+
+-n <overwrite-pass-count>::
+--owpass=<overwrite-pass-count>::
+ Overwrite Pass Count:
+ This field specifies the number of overwrite passes (i.e.,
+ how many times the media is to be overwritten) using the data
+ from the Overwrite Pattern field of this command. A value of 0
+ specifies 16 overwrite passes. This field shall be ignored
+ unless the Sanitize Action field is set to 011b (i.e., Overwrite).
+
+-u::
+--ause::
+ Allow Unrestricted Sanitize Exit:
+ If set, then the sanitize operation is performed in unrestricted
+ completion mode. If cleared then the sanitize operation is
+ performed in restricted completion mode. This bit shall be ignored
+ if the Sanitize Action field is set to 001b (i.e., Exit Failure Mode).
+
+-a <action>::
+--sanact=<action>::
+ Sanitize Action:
+ 000b - Reserved
+ 001b - Exit Failure Mode
+ 010b - Start a Block Erase sanitize operation
+ 011b - Start an Overwrite sanitize operation
+ 100b - Start a Crypto Erase sanitize operation
+
+-p <overwrite-pattern>::
+--ovrpat=<overwrite-pattern>::
+ Overwrite Pattern:
+ This field is ignored unless the Sanitize Action field in
+ Command Dword 10 is set to 011b (i.e., Overwrite). This field
+ specifies a 32-bit pattern that is used for the Overwrite
+ sanitize operation.
+
+EXAMPLES
+--------
+* Has the program issue Sanitize Command :
++
+------------
+# nvme sanitize /dev/nvme0n1 -a 0x02
+# nvme sanitize /dev/nvme0n1 --sanact=0x01
+
+------------
+
+NVME
+----
+Part of the nvme-user suite.
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/4] nvme-cli : add support for retrieving sanitize log.
2017-06-29 2:19 nvme-cli : Sanitize and Sanitize Log command support Chaitanya Kulkarni
2017-06-29 2:19 ` [PATCH 1/4] nvme-cli : add support for sanitize command Chaitanya Kulkarni
2017-06-29 2:19 ` [PATCH 2/4] nvme-cli : add sanitize command documentation Chaitanya Kulkarni
@ 2017-06-29 2:19 ` Chaitanya Kulkarni
2017-06-29 2:19 ` [PATCH 4/4] nvme-cli : add sanitize-log command documentation Chaitanya Kulkarni
3 siblings, 0 replies; 7+ messages in thread
From: Chaitanya Kulkarni @ 2017-06-29 2:19 UTC (permalink / raw)
This adds support for retrieving and printing NVMe sanitize log
page. For more details please look into NVM Express 1.3
specification.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni at hgst.com>
---
linux/nvme.h | 23 +++++++++++++++++++++-
nvme-builtin.h | 1 +
nvme.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 85 insertions(+), 1 deletion(-)
diff --git a/linux/nvme.h b/linux/nvme.h
index 28ab9b8..19354a5 100644
--- a/linux/nvme.h
+++ b/linux/nvme.h
@@ -693,13 +693,15 @@ enum {
NVME_LOG_FW_SLOT = 0x03,
NVME_LOG_DISC = 0x70,
NVME_LOG_RESERVATION = 0x80,
+ NVME_LOG_SANITIZE = 0x81,
NVME_FWACT_REPL = (0 << 3),
NVME_FWACT_REPL_ACTV = (1 << 3),
NVME_FWACT_ACTV = (2 << 3),
};
-/* Sanitize */
+/* Sanitize and Sanitize Monitor/Log */
enum {
+ /* Sanitize */
NVME_SANITIZE_NO_DEALLOC = 0x00000200,
NVME_SANITIZE_OIPBP = 0x00000100,
NVME_SANITIZE_OWPASS_SHIFT = 0x00000004,
@@ -708,6 +710,15 @@ enum {
NVME_SANITIZE_ACT_OVERWRITE = 0x00000003,
NVME_SANITIZE_ACT_BLOCK_ERASE = 0x00000002,
NVME_SANITIZE_ACT_EXIT = 0x00000001,
+
+ /* Sanitize Monitor/Log */
+ NVME_SANITIZE_LOG_DATA_LEN = 0x0014,
+ NVME_SANITIZE_LOG_GLOBAL_DATA_ERASED = 0x0100,
+ NVME_SANITIZE_LOG_STATUS_MASK = 0x0007,
+ NVME_SANITIZE_LOG_NEVER_SANITIZED = 0x0000,
+ NVME_SANITIZE_LOG_COMPLETED_SUCCESS = 0x0001,
+ NVME_SANITIZE_LOG_IN_PROGESS = 0x0002,
+ NVME_SANITIZE_LOG_COMPLETED_FAILED = 0x0003,
};
struct nvme_identify {
@@ -832,6 +843,16 @@ struct nvme_get_log_page_command {
__u32 rsvd14[2];
};
+/* Sanitize Log Page */
+struct nvme_sanitize_log_page {
+ __le16 progress;
+ __le16 status;
+ __le32 cdw10_info;
+ __le32 est_ovrwrt_time;
+ __le32 est_blk_erase_time;
+ __le32 est_crypto_erase_time;
+};
+
/*
* Fabrics subcommands.
*/
diff --git a/nvme-builtin.h b/nvme-builtin.h
index b4cd3ba..2143ffd 100644
--- a/nvme-builtin.h
+++ b/nvme-builtin.h
@@ -43,6 +43,7 @@ COMMAND_LIST(
ENTRY("write-zeroes", "Submit a write zeroes command, return results", write_zeroes)
ENTRY("write-uncor", "Submit a write uncorrectable command, return results", write_uncor)
ENTRY("sanitize", "Submit a sanitize command", sanitize)
+ ENTRY("sanitize-log", "Retrive sanitize log, show it", sanitize_log)
ENTRY("reset", "Resets the controller", reset)
ENTRY("subsystem-reset", "Resets the controller", subsystem_reset)
ENTRY("show-regs", "Shows the controller registers. Requires admin character device", show_registers)
diff --git a/nvme.c b/nvme.c
index 8507cd3..40fb3df 100644
--- a/nvme.c
+++ b/nvme.c
@@ -422,6 +422,68 @@ static int get_log(int argc, char **argv, struct command *cmd, struct plugin *pl
}
}
+static const char * sanitize_mon_status_to_string(__u16 status)
+{
+ const char * str;
+
+ switch (status & NVME_SANITIZE_LOG_STATUS_MASK) {
+ case NVME_SANITIZE_LOG_NEVER_SANITIZED:
+ str = "NVM Subsystem has never been sanitized.";
+ break;
+ case NVME_SANITIZE_LOG_COMPLETED_SUCCESS:
+ str = "Most Recent Sanitize Command Completed Successfully.";
+ break;
+ case NVME_SANITIZE_LOG_IN_PROGESS:
+ str = "Sanitize in Progress.";
+ break;
+ case NVME_SANITIZE_LOG_COMPLETED_FAILED:
+ str = "Most Recent Sanitize Command Failed.";
+ break;
+ default:
+ str = "Unknown.";
+ }
+
+ return str;
+}
+
+static int sanitize_log(int argc, char **argv, struct command *command, struct plugin *plugin)
+{
+ char *desc = "Retrieve sanitize log and show it.";
+ int fd;
+ int ret;
+ __u8 output[NVME_SANITIZE_LOG_DATA_LEN] = {0};
+ struct nvme_sanitize_log_page *slp;
+ double progress_percent;
+ const struct argconfig_commandline_options command_line_options[] = {
+ { NULL, '\0', NULL, CFG_NONE, NULL, no_argument, desc},
+ {NULL}
+ };
+
+ fd = parse_and_open(argc, argv, desc, command_line_options, NULL, 0);
+ if (fd < 0)
+ return fd;
+
+ ret = nvme_get_log(fd, 0x01, NVME_LOG_SANITIZE, NVME_SANITIZE_LOG_DATA_LEN, output);
+ fprintf(stderr, "NVMe Status:%s(%x)\n", nvme_status_to_string(ret), ret);
+ if (ret != 0)
+ return ret;
+
+ slp = (struct nvme_sanitize_log_page *) output;
+ printf("Sanitize status = 0x%0x\n", slp->status);
+ printf("%s\n", sanitize_mon_status_to_string(slp->status));
+
+ if ((slp->status & NVME_SANITIZE_LOG_STATUS_MASK) == NVME_SANITIZE_LOG_IN_PROGESS) {
+ progress_percent = (((double)le32_to_cpu(slp->progress) * 100) / 0x10000);
+ printf("Sanitize Progress (percentage) = %f%%\n", progress_percent);
+ } else {
+ if (slp->status & NVME_SANITIZE_LOG_GLOBAL_DATA_ERASED)
+ printf("Global Data Erased Set\n");
+ else
+ printf("Global Data Erased Cleared\n");
+ }
+ return ret;
+}
+
static int list_ctrl(int argc, char **argv, struct command *cmd, struct plugin *plugin)
{
const char *desc = "Show controller list information for the subsystem the "\
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 4/4] nvme-cli : add sanitize-log command documentation.
2017-06-29 2:19 nvme-cli : Sanitize and Sanitize Log command support Chaitanya Kulkarni
` (2 preceding siblings ...)
2017-06-29 2:19 ` [PATCH 3/4] nvme-cli : add support for retrieving sanitize log Chaitanya Kulkarni
@ 2017-06-29 2:19 ` Chaitanya Kulkarni
3 siblings, 0 replies; 7+ messages in thread
From: Chaitanya Kulkarni @ 2017-06-29 2:19 UTC (permalink / raw)
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni at hgst.com>
---
Documentation/nvme-sanitize-log.1 | 126 ++++++
Documentation/nvme-sanitize-log.html | 848 +++++++++++++++++++++++++++++++++++
Documentation/nvme-sanitize-log.txt | 67 +++
3 files changed, 1041 insertions(+)
create mode 100644 Documentation/nvme-sanitize-log.1
create mode 100644 Documentation/nvme-sanitize-log.html
create mode 100644 Documentation/nvme-sanitize-log.txt
diff --git a/Documentation/nvme-sanitize-log.1 b/Documentation/nvme-sanitize-log.1
new file mode 100644
index 0000000..d31dc69
--- /dev/null
+++ b/Documentation/nvme-sanitize-log.1
@@ -0,0 +1,126 @@
+'\" t
+.\" Title: nvme-sanitize-log
+.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.79.1 <http://docbook.sf.net/>
+.\" Date: 06/28/2017
+.\" Manual: NVMe Manual
+.\" Source: NVMe
+.\" Language: English
+.\"
+.TH "NVME\-SANITIZE\-LOG" "1" "06/28/2017" "NVMe" "NVMe Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nvme-sanitize-log \- Send NVMe sanitize\-log Command, return result
+.SH "SYNOPSIS"
+.sp
+.nf
+\fInvme sanitize\-log\fR <device>
+.fi
+.SH "DESCRIPTION"
+.sp
+Retrieves the NVMe Sanitize log page from an NVMe device and provides the status of sanitize command\&.
+.sp
+The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0)\&.
+.sp
+Expected status and description :\-
+.TS
+allbox tab(:);
+ltB ltB.
+T{
+Status Code
+T}:T{
+Description
+T}
+.T&
+lt lt
+lt lt
+lt lt
+lt lt
+lt lt.
+T{
+.sp
+0x0000
+T}:T{
+.sp
+NVM subsystem has never been sanitized\&.
+T}
+T{
+.sp
+0x0001
+T}:T{
+.sp
+The most recent sanitize operation completed successfully\&.
+T}
+T{
+.sp
+0x0002
+T}:T{
+.sp
+A sanitize operation is currently in progress\&.
+T}
+T{
+.sp
+0x0003
+T}:T{
+.sp
+The most recent sanitize operation failed\&.
+T}
+T{
+.sp
+0x0100
+T}:T{
+.sp
+Global Data Erased bit If set to 1 then non\-volatile storage in the NVM subsystem has not been written to: a) since being manufactured and the NVM subsystem has never been sanitized; or b) since the most recent successful sanitize operation\&. If cleared to 0, then non\-volatile storage in the NVM subsystem has been written to: a) since being manufactured and the NVM subsystem has never been sanitized; or b) since the most recent successful sanitize operation of the NVM subsystem\&.
+T}
+.TE
+.sp 1
+.sp
+Sanitize Progress \- percentage complete
+.sp
+On success it returns 0, error code otherwise\&.
+.SH "OPTIONS"
+.sp
+No options yet\&.
+.SH "EXAMPLES"
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+Has the program issue Sanitize\-log Command :
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+# nvme sanitize\-log /dev/nvme0
+.fi
+.if n \{\
+.RE
+.\}
+.RE
+.SH "NVME"
+.sp
+Part of the nvme\-user suite\&.
diff --git a/Documentation/nvme-sanitize-log.html b/Documentation/nvme-sanitize-log.html
new file mode 100644
index 0000000..2b2c5f0
--- /dev/null
+++ b/Documentation/nvme-sanitize-log.html
@@ -0,0 +1,848 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN"
+ "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+<head>
+<meta http-equiv="Content-Type" content="application/xhtml+xml; charset=UTF-8" />
+<meta name="generator" content="AsciiDoc 8.6.9" />
+<title>nvme-sanitize-log(1)</title>
+<style type="text/css">
+/* Shared CSS for AsciiDoc xhtml11 and html5 backends */
+
+/* Default font. */
+body {
+ font-family: Georgia,serif;
+}
+
+/* Title font. */
+h1, h2, h3, h4, h5, h6,
+div.title, caption.title,
+thead, p.table.header,
+#toctitle,
+#author, #revnumber, #revdate, #revremark,
+#footer {
+ font-family: Arial,Helvetica,sans-serif;
+}
+
+body {
+ margin: 1em 5% 1em 5%;
+}
+
+a {
+ color: blue;
+ text-decoration: underline;
+}
+a:visited {
+ color: fuchsia;
+}
+
+em {
+ font-style: italic;
+ color: navy;
+}
+
+strong {
+ font-weight: bold;
+ color: #083194;
+}
+
+h1, h2, h3, h4, h5, h6 {
+ color: #527bbd;
+ margin-top: 1.2em;
+ margin-bottom: 0.5em;
+ line-height: 1.3;
+}
+
+h1, h2, h3 {
+ border-bottom: 2px solid silver;
+}
+h2 {
+ padding-top: 0.5em;
+}
+h3 {
+ float: left;
+}
+h3 + * {
+ clear: left;
+}
+h5 {
+ font-size: 1.0em;
+}
+
+div.sectionbody {
+ margin-left: 0;
+}
+
+hr {
+ border: 1px solid silver;
+}
+
+p {
+ margin-top: 0.5em;
+ margin-bottom: 0.5em;
+}
+
+ul, ol, li > p {
+ margin-top: 0;
+}
+ul > li { color: #aaa; }
+ul > li > * { color: black; }
+
+.monospaced, code, pre {
+ font-family: "Courier New", Courier, monospace;
+ font-size: inherit;
+ color: navy;
+ padding: 0;
+ margin: 0;
+}
+pre {
+ white-space: pre-wrap;
+}
+
+#author {
+ color: #527bbd;
+ font-weight: bold;
+ font-size: 1.1em;
+}
+#email {
+}
+#revnumber, #revdate, #revremark {
+}
+
+#footer {
+ font-size: small;
+ border-top: 2px solid silver;
+ padding-top: 0.5em;
+ margin-top: 4.0em;
+}
+#footer-text {
+ float: left;
+ padding-bottom: 0.5em;
+}
+#footer-badges {
+ float: right;
+ padding-bottom: 0.5em;
+}
+
+#preamble {
+ margin-top: 1.5em;
+ margin-bottom: 1.5em;
+}
+div.imageblock, div.exampleblock, div.verseblock,
+div.quoteblock, div.literalblock, div.listingblock, div.sidebarblock,
+div.admonitionblock {
+ margin-top: 1.0em;
+ margin-bottom: 1.5em;
+}
+div.admonitionblock {
+ margin-top: 2.0em;
+ margin-bottom: 2.0em;
+ margin-right: 10%;
+ color: #606060;
+}
+
+div.content { /* Block element content. */
+ padding: 0;
+}
+
+/* Block element titles. */
+div.title, caption.title {
+ color: #527bbd;
+ font-weight: bold;
+ text-align: left;
+ margin-top: 1.0em;
+ margin-bottom: 0.5em;
+}
+div.title + * {
+ margin-top: 0;
+}
+
+td div.title:first-child {
+ margin-top: 0.0em;
+}
+div.content div.title:first-child {
+ margin-top: 0.0em;
+}
+div.content + div.title {
+ margin-top: 0.0em;
+}
+
+div.sidebarblock > div.content {
+ background: #ffffee;
+ border: 1px solid #dddddd;
+ border-left: 4px solid #f0f0f0;
+ padding: 0.5em;
+}
+
+div.listingblock > div.content {
+ border: 1px solid #dddddd;
+ border-left: 5px solid #f0f0f0;
+ background: #f8f8f8;
+ padding: 0.5em;
+}
+
+div.quoteblock, div.verseblock {
+ padding-left: 1.0em;
+ margin-left: 1.0em;
+ margin-right: 10%;
+ border-left: 5px solid #f0f0f0;
+ color: #888;
+}
+
+div.quoteblock > div.attribution {
+ padding-top: 0.5em;
+ text-align: right;
+}
+
+div.verseblock > pre.content {
+ font-family: inherit;
+ font-size: inherit;
+}
+div.verseblock > div.attribution {
+ padding-top: 0.75em;
+ text-align: left;
+}
+/* DEPRECATED: Pre version 8.2.7 verse style literal block. */
+div.verseblock + div.attribution {
+ text-align: left;
+}
+
+div.admonitionblock .icon {
+ vertical-align: top;
+ font-size: 1.1em;
+ font-weight: bold;
+ text-decoration: underline;
+ color: #527bbd;
+ padding-right: 0.5em;
+}
+div.admonitionblock td.content {
+ padding-left: 0.5em;
+ border-left: 3px solid #dddddd;
+}
+
+div.exampleblock > div.content {
+ border-left: 3px solid #dddddd;
+ padding-left: 0.5em;
+}
+
+div.imageblock div.content { padding-left: 0; }
+span.image img { border-style: none; vertical-align: text-bottom; }
+a.image:visited { color: white; }
+
+dl {
+ margin-top: 0.8em;
+ margin-bottom: 0.8em;
+}
+dt {
+ margin-top: 0.5em;
+ margin-bottom: 0;
+ font-style: normal;
+ color: navy;
+}
+dd > *:first-child {
+ margin-top: 0.1em;
+}
+
+ul, ol {
+ list-style-position: outside;
+}
+ol.arabic {
+ list-style-type: decimal;
+}
+ol.loweralpha {
+ list-style-type: lower-alpha;
+}
+ol.upperalpha {
+ list-style-type: upper-alpha;
+}
+ol.lowerroman {
+ list-style-type: lower-roman;
+}
+ol.upperroman {
+ list-style-type: upper-roman;
+}
+
+div.compact ul, div.compact ol,
+div.compact p, div.compact p,
+div.compact div, div.compact div {
+ margin-top: 0.1em;
+ margin-bottom: 0.1em;
+}
+
+tfoot {
+ font-weight: bold;
+}
+td > div.verse {
+ white-space: pre;
+}
+
+div.hdlist {
+ margin-top: 0.8em;
+ margin-bottom: 0.8em;
+}
+div.hdlist tr {
+ padding-bottom: 15px;
+}
+dt.hdlist1.strong, td.hdlist1.strong {
+ font-weight: bold;
+}
+td.hdlist1 {
+ vertical-align: top;
+ font-style: normal;
+ padding-right: 0.8em;
+ color: navy;
+}
+td.hdlist2 {
+ vertical-align: top;
+}
+div.hdlist.compact tr {
+ margin: 0;
+ padding-bottom: 0;
+}
+
+.comment {
+ background: yellow;
+}
+
+.footnote, .footnoteref {
+ font-size: 0.8em;
+}
+
+span.footnote, span.footnoteref {
+ vertical-align: super;
+}
+
+#footnotes {
+ margin: 20px 0 20px 0;
+ padding: 7px 0 0 0;
+}
+
+#footnotes div.footnote {
+ margin: 0 0 5px 0;
+}
+
+#footnotes hr {
+ border: none;
+ border-top: 1px solid silver;
+ height: 1px;
+ text-align: left;
+ margin-left: 0;
+ width: 20%;
+ min-width: 100px;
+}
+
+div.colist td {
+ padding-right: 0.5em;
+ padding-bottom: 0.3em;
+ vertical-align: top;
+}
+div.colist td img {
+ margin-top: 0.3em;
+}
+
+ at media print {
+ #footer-badges { display: none; }
+}
+
+#toc {
+ margin-bottom: 2.5em;
+}
+
+#toctitle {
+ color: #527bbd;
+ font-size: 1.1em;
+ font-weight: bold;
+ margin-top: 1.0em;
+ margin-bottom: 0.1em;
+}
+
+div.toclevel0, div.toclevel1, div.toclevel2, div.toclevel3, div.toclevel4 {
+ margin-top: 0;
+ margin-bottom: 0;
+}
+div.toclevel2 {
+ margin-left: 2em;
+ font-size: 0.9em;
+}
+div.toclevel3 {
+ margin-left: 4em;
+ font-size: 0.9em;
+}
+div.toclevel4 {
+ margin-left: 6em;
+ font-size: 0.9em;
+}
+
+span.aqua { color: aqua; }
+span.black { color: black; }
+span.blue { color: blue; }
+span.fuchsia { color: fuchsia; }
+span.gray { color: gray; }
+span.green { color: green; }
+span.lime { color: lime; }
+span.maroon { color: maroon; }
+span.navy { color: navy; }
+span.olive { color: olive; }
+span.purple { color: purple; }
+span.red { color: red; }
+span.silver { color: silver; }
+span.teal { color: teal; }
+span.white { color: white; }
+span.yellow { color: yellow; }
+
+span.aqua-background { background: aqua; }
+span.black-background { background: black; }
+span.blue-background { background: blue; }
+span.fuchsia-background { background: fuchsia; }
+span.gray-background { background: gray; }
+span.green-background { background: green; }
+span.lime-background { background: lime; }
+span.maroon-background { background: maroon; }
+span.navy-background { background: navy; }
+span.olive-background { background: olive; }
+span.purple-background { background: purple; }
+span.red-background { background: red; }
+span.silver-background { background: silver; }
+span.teal-background { background: teal; }
+span.white-background { background: white; }
+span.yellow-background { background: yellow; }
+
+span.big { font-size: 2em; }
+span.small { font-size: 0.6em; }
+
+span.underline { text-decoration: underline; }
+span.overline { text-decoration: overline; }
+span.line-through { text-decoration: line-through; }
+
+div.unbreakable { page-break-inside: avoid; }
+
+
+/*
+ * xhtml11 specific
+ *
+ * */
+
+div.tableblock {
+ margin-top: 1.0em;
+ margin-bottom: 1.5em;
+}
+div.tableblock > table {
+ border: 3px solid #527bbd;
+}
+thead, p.table.header {
+ font-weight: bold;
+ color: #527bbd;
+}
+p.table {
+ margin-top: 0;
+}
+/* Because the table frame attribute is overriden by CSS in most browsers. */
+div.tableblock > table[frame="void"] {
+ border-style: none;
+}
+div.tableblock > table[frame="hsides"] {
+ border-left-style: none;
+ border-right-style: none;
+}
+div.tableblock > table[frame="vsides"] {
+ border-top-style: none;
+ border-bottom-style: none;
+}
+
+
+/*
+ * html5 specific
+ *
+ * */
+
+table.tableblock {
+ margin-top: 1.0em;
+ margin-bottom: 1.5em;
+}
+thead, p.tableblock.header {
+ font-weight: bold;
+ color: #527bbd;
+}
+p.tableblock {
+ margin-top: 0;
+}
+table.tableblock {
+ border-width: 3px;
+ border-spacing: 0px;
+ border-style: solid;
+ border-color: #527bbd;
+ border-collapse: collapse;
+}
+th.tableblock, td.tableblock {
+ border-width: 1px;
+ padding: 4px;
+ border-style: solid;
+ border-color: #527bbd;
+}
+
+table.tableblock.frame-topbot {
+ border-left-style: hidden;
+ border-right-style: hidden;
+}
+table.tableblock.frame-sides {
+ border-top-style: hidden;
+ border-bottom-style: hidden;
+}
+table.tableblock.frame-none {
+ border-style: hidden;
+}
+
+th.tableblock.halign-left, td.tableblock.halign-left {
+ text-align: left;
+}
+th.tableblock.halign-center, td.tableblock.halign-center {
+ text-align: center;
+}
+th.tableblock.halign-right, td.tableblock.halign-right {
+ text-align: right;
+}
+
+th.tableblock.valign-top, td.tableblock.valign-top {
+ vertical-align: top;
+}
+th.tableblock.valign-middle, td.tableblock.valign-middle {
+ vertical-align: middle;
+}
+th.tableblock.valign-bottom, td.tableblock.valign-bottom {
+ vertical-align: bottom;
+}
+
+
+/*
+ * manpage specific
+ *
+ * */
+
+body.manpage h1 {
+ padding-top: 0.5em;
+ padding-bottom: 0.5em;
+ border-top: 2px solid silver;
+ border-bottom: 2px solid silver;
+}
+body.manpage h2 {
+ border-style: none;
+}
+body.manpage div.sectionbody {
+ margin-left: 3em;
+}
+
+ at media print {
+ body.manpage div#toc { display: none; }
+}
+
+
+</style>
+<script type="text/javascript">
+/*<![CDATA[*/
+var asciidoc = { // Namespace.
+
+/////////////////////////////////////////////////////////////////////
+// Table Of Contents generator
+/////////////////////////////////////////////////////////////////////
+
+/* Author: Mihai Bazon, September 2002
+ * http://students.infoiasi.ro/~mishoo
+ *
+ * Table Of Content generator
+ * Version: 0.4
+ *
+ * Feel free to use this script under the terms of the GNU General Public
+ * License, as long as you do not remove or alter this notice.
+ */
+
+ /* modified by Troy D. Hanson, September 2006. License: GPL */
+ /* modified by Stuart Rackham, 2006, 2009. License: GPL */
+
+// toclevels = 1..4.
+toc: function (toclevels) {
+
+ function getText(el) {
+ var text = "";
+ for (var i = el.firstChild; i != null; i = i.nextSibling) {
+ if (i.nodeType == 3 /* Node.TEXT_NODE */) // IE doesn't speak constants.
+ text += i.data;
+ else if (i.firstChild != null)
+ text += getText(i);
+ }
+ return text;
+ }
+
+ function TocEntry(el, text, toclevel) {
+ this.element = el;
+ this.text = text;
+ this.toclevel = toclevel;
+ }
+
+ function tocEntries(el, toclevels) {
+ var result = new Array;
+ var re = new RegExp('[hH]([1-'+(toclevels+1)+'])');
+ // Function that scans the DOM tree for header elements (the DOM2
+ // nodeIterator API would be a better technique but not supported by all
+ // browsers).
+ var iterate = function (el) {
+ for (var i = el.firstChild; i != null; i = i.nextSibling) {
+ if (i.nodeType == 1 /* Node.ELEMENT_NODE */) {
+ var mo = re.exec(i.tagName);
+ if (mo && (i.getAttribute("class") || i.getAttribute("className")) != "float") {
+ result[result.length] = new TocEntry(i, getText(i), mo[1]-1);
+ }
+ iterate(i);
+ }
+ }
+ }
+ iterate(el);
+ return result;
+ }
+
+ var toc = document.getElementById("toc");
+ if (!toc) {
+ return;
+ }
+
+ // Delete existing TOC entries in case we're reloading the TOC.
+ var tocEntriesToRemove = [];
+ var i;
+ for (i = 0; i < toc.childNodes.length; i++) {
+ var entry = toc.childNodes[i];
+ if (entry.nodeName.toLowerCase() == 'div'
+ && entry.getAttribute("class")
+ && entry.getAttribute("class").match(/^toclevel/))
+ tocEntriesToRemove.push(entry);
+ }
+ for (i = 0; i < tocEntriesToRemove.length; i++) {
+ toc.removeChild(tocEntriesToRemove[i]);
+ }
+
+ // Rebuild TOC entries.
+ var entries = tocEntries(document.getElementById("content"), toclevels);
+ for (var i = 0; i < entries.length; ++i) {
+ var entry = entries[i];
+ if (entry.element.id == "")
+ entry.element.id = "_toc_" + i;
+ var a = document.createElement("a");
+ a.href = "#" + entry.element.id;
+ a.appendChild(document.createTextNode(entry.text));
+ var div = document.createElement("div");
+ div.appendChild(a);
+ div.className = "toclevel" + entry.toclevel;
+ toc.appendChild(div);
+ }
+ if (entries.length == 0)
+ toc.parentNode.removeChild(toc);
+},
+
+
+/////////////////////////////////////////////////////////////////////
+// Footnotes generator
+/////////////////////////////////////////////////////////////////////
+
+/* Based on footnote generation code from:
+ * http://www.brandspankingnew.net/archive/2005/07/format_footnote.html
+ */
+
+footnotes: function () {
+ // Delete existing footnote entries in case we're reloading the footnodes.
+ var i;
+ var noteholder = document.getElementById("footnotes");
+ if (!noteholder) {
+ return;
+ }
+ var entriesToRemove = [];
+ for (i = 0; i < noteholder.childNodes.length; i++) {
+ var entry = noteholder.childNodes[i];
+ if (entry.nodeName.toLowerCase() == 'div' && entry.getAttribute("class") == "footnote")
+ entriesToRemove.push(entry);
+ }
+ for (i = 0; i < entriesToRemove.length; i++) {
+ noteholder.removeChild(entriesToRemove[i]);
+ }
+
+ // Rebuild footnote entries.
+ var cont = document.getElementById("content");
+ var spans = cont.getElementsByTagName("span");
+ var refs = {};
+ var n = 0;
+ for (i=0; i<spans.length; i++) {
+ if (spans[i].className == "footnote") {
+ n++;
+ var note = spans[i].getAttribute("data-note");
+ if (!note) {
+ // Use [\s\S] in place of . so multi-line matches work.
+ // Because JavaScript has no s (dotall) regex flag.
+ note = spans[i].innerHTML.match(/\s*\[([\s\S]*)]\s*/)[1];
+ spans[i].innerHTML =
+ "[<a id='_footnoteref_" + n + "' href='#_footnote_" + n +
+ "' title='View footnote' class='footnote'>" + n + "</a>]";
+ spans[i].setAttribute("data-note", note);
+ }
+ noteholder.innerHTML +=
+ "<div class='footnote' id='_footnote_" + n + "'>" +
+ "<a href='#_footnoteref_" + n + "' title='Return to text'>" +
+ n + "</a>. " + note + "</div>";
+ var id =spans[i].getAttribute("id");
+ if (id != null) refs["#"+id] = n;
+ }
+ }
+ if (n == 0)
+ noteholder.parentNode.removeChild(noteholder);
+ else {
+ // Process footnoterefs.
+ for (i=0; i<spans.length; i++) {
+ if (spans[i].className == "footnoteref") {
+ var href = spans[i].getElementsByTagName("a")[0].getAttribute("href");
+ href = href.match(/#.*/)[0]; // Because IE return full URL.
+ n = refs[href];
+ spans[i].innerHTML =
+ "[<a href='#_footnote_" + n +
+ "' title='View footnote' class='footnote'>" + n + "</a>]";
+ }
+ }
+ }
+},
+
+install: function(toclevels) {
+ var timerId;
+
+ function reinstall() {
+ asciidoc.footnotes();
+ if (toclevels) {
+ asciidoc.toc(toclevels);
+ }
+ }
+
+ function reinstallAndRemoveTimer() {
+ clearInterval(timerId);
+ reinstall();
+ }
+
+ timerId = setInterval(reinstall, 500);
+ if (document.addEventListener)
+ document.addEventListener("DOMContentLoaded", reinstallAndRemoveTimer, false);
+ else
+ window.onload = reinstallAndRemoveTimer;
+}
+
+}
+asciidoc.install();
+/*]]>*/
+</script>
+</head>
+<body class="manpage">
+<div id="header">
+<h1>
+nvme-sanitize-log(1) Manual Page
+</h1>
+<h2>NAME</h2>
+<div class="sectionbody">
+<p>nvme-sanitize-log -
+ Send NVMe sanitize-log Command, return result
+</p>
+</div>
+</div>
+<div id="content">
+<div class="sect1">
+<h2 id="_synopsis">SYNOPSIS</h2>
+<div class="sectionbody">
+<div class="verseblock">
+<pre class="content"><em>nvme sanitize-log</em> <device></pre>
+<div class="attribution">
+</div></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_description">DESCRIPTION</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>Retrieves the NVMe Sanitize log page from an NVMe device and provides the
+status of sanitize command.</p></div>
+<div class="paragraph"><p>The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0).</p></div>
+<div class="paragraph"><p>Expected status and description :-</p></div>
+<div class="tableblock">
+<table rules="all"
+width="100%"
+frame="border"
+cellspacing="0" cellpadding="4">
+<col width="50%" />
+<col width="50%" />
+<thead>
+<tr>
+<th align="left" valign="top">Status Code </th>
+<th align="left" valign="top">Description</th>
+</tr>
+</thead>
+<tbody>
+<tr>
+<td align="left" valign="top"><p class="table">0x0000</p></td>
+<td align="left" valign="top"><p class="table">NVM subsystem has never been sanitized.</p></td>
+</tr>
+<tr>
+<td align="left" valign="top"><p class="table">0x0001</p></td>
+<td align="left" valign="top"><p class="table">The most recent sanitize operation completed successfully.</p></td>
+</tr>
+<tr>
+<td align="left" valign="top"><p class="table">0x0002</p></td>
+<td align="left" valign="top"><p class="table">A sanitize operation is currently in progress.</p></td>
+</tr>
+<tr>
+<td align="left" valign="top"><p class="table">0x0003</p></td>
+<td align="left" valign="top"><p class="table">The most recent sanitize operation failed.</p></td>
+</tr>
+<tr>
+<td align="left" valign="top"><p class="table">0x0100</p></td>
+<td align="left" valign="top"><p class="table">Global Data Erased bit
+If set to 1 then non-volatile storage in the NVM subsystem has
+not been written to:
+ a) since being manufactured and the NVM subsystem has never been sanitized; or
+ b) since the most recent successful sanitize operation.
+If cleared to 0, then non-volatile storage in the NVM subsystem has been written to:
+ a) since being manufactured and the NVM subsystem has never been sanitized; or
+ b) since the most recent successful sanitize operation of the NVM subsystem.</p></td>
+</tr>
+</tbody>
+</table>
+</div>
+<div class="paragraph"><p>Sanitize Progress - percentage complete</p></div>
+<div class="paragraph"><p>On success it returns 0, error code otherwise.</p></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_options">OPTIONS</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>No options yet.</p></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_examples">EXAMPLES</h2>
+<div class="sectionbody">
+<div class="ulist"><ul>
+<li>
+<p>
+Has the program issue Sanitize-log Command :
+</p>
+<div class="listingblock">
+<div class="content">
+<pre><code># nvme sanitize-log /dev/nvme0</code></pre>
+</div></div>
+</li>
+</ul></div>
+</div>
+</div>
+<div class="sect1">
+<h2 id="_nvme">NVME</h2>
+<div class="sectionbody">
+<div class="paragraph"><p>Part of the nvme-user suite.</p></div>
+</div>
+</div>
+</div>
+<div id="footnotes"><hr /></div>
+<div id="footer">
+<div id="footer-text">
+Last updated
+ 2017-06-28 11:25:21 PDT
+</div>
+</div>
+</body>
+</html>
diff --git a/Documentation/nvme-sanitize-log.txt b/Documentation/nvme-sanitize-log.txt
new file mode 100644
index 0000000..a4ff729
--- /dev/null
+++ b/Documentation/nvme-sanitize-log.txt
@@ -0,0 +1,67 @@
+nvme-sanitize-log(1)
+====================
+
+NAME
+----
+nvme-sanitize-log - Send NVMe sanitize-log Command, return result
+
+SYNOPSIS
+--------
+[verse]
+'nvme sanitize-log' <device>
+
+DESCRIPTION
+-----------
+Retrieves the NVMe Sanitize log page from an NVMe device and provides the
+status of sanitize command.
+
+The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0).
+
+Expected status and description :-
+
+[cols="2*", options="header"]
+|===
+|Status Code |Description
+
+|0x0000
+|NVM subsystem has never been sanitized.
+
+|0x0001
+|The most recent sanitize operation completed successfully.
+
+|0x0002
+|A sanitize operation is currently in progress.
+
+|0x0003
+|The most recent sanitize operation failed.
+
+|0x0100
+|Global Data Erased bit
+If set to 1 then non-volatile storage in the NVM subsystem has
+not been written to:
+ a) since being manufactured and the NVM subsystem has never been sanitized; or
+ b) since the most recent successful sanitize operation.
+If cleared to 0, then non-volatile storage in the NVM subsystem has been written to:
+ a) since being manufactured and the NVM subsystem has never been sanitized; or
+ b) since the most recent successful sanitize operation of the NVM subsystem.
+|===
+
+Sanitize Progress - percentage complete
+
+On success it returns 0, error code otherwise.
+
+OPTIONS
+-------
+No options yet.
+
+EXAMPLES
+--------
+* Has the program issue Sanitize-log Command :
++
+------------
+# nvme sanitize-log /dev/nvme0
+------------
+
+NVME
+----
+Part of the nvme-user suite.
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread