All of lore.kernel.org
 help / color / mirror / Atom feed
From: jlayton@kernel.org
To: Andrew Morton <akpm@linux-foundation.org>,
	Al Viro <viro@ZenIV.linux.org.uk>, Jan Kara <jack@suse.cz>,
	tytso@mit.edu, axboe@kernel.dk, mawilcox@microsoft.com,
	ross.zwisler@linux.intel.com, corbet@lwn.net,
	Chris Mason <clm@fb.com>, Josef Bacik <jbacik@fb.com>,
	David Sterba <dsterba@suse.com>,
	"Darrick J . Wong" <darrick.wong@oracle.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>,
	Eryu Guan <eguan@redhat.com>, David Howells <dhowells@redhat.com>,
	Christoph Hellwig <hch@infradead.org>,
	Liu Bo <bo.li.liu@oracle.com>,
	linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
	linux-ext4@vger.kernel.org, linux-xfs@vger.kernel.org,
	linux-btrfs@vger.kernel.org, linux-block@vger.kernel.org
Subject: [PATCH v8 10/18] fs: new infrastructure for writeback error handling and reporting
Date: Thu, 29 Jun 2017 09:19:46 -0400	[thread overview]
Message-ID: <20170629131954.28733-11-jlayton@kernel.org> (raw)
In-Reply-To: <20170629131954.28733-1-jlayton@kernel.org>

From: Jeff Layton <jlayton@redhat.com>

Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.

The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.

If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.

This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.

In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.

One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.

This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.

This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).

Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.

The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 drivers/dax/device.c           |  1 +
 fs/block_dev.c                 |  1 +
 fs/file_table.c                |  1 +
 fs/open.c                      |  3 ++
 include/linux/fs.h             | 60 ++++++++++++++++++++++++++++-
 include/trace/events/filemap.h | 57 ++++++++++++++++++++++++++++
 mm/filemap.c                   | 86 ++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 208 insertions(+), 1 deletion(-)

diff --git a/drivers/dax/device.c b/drivers/dax/device.c
index 006e657dfcb9..12943d19bfc4 100644
--- a/drivers/dax/device.c
+++ b/drivers/dax/device.c
@@ -499,6 +499,7 @@ static int dax_open(struct inode *inode, struct file *filp)
 	inode->i_mapping = __dax_inode->i_mapping;
 	inode->i_mapping->host = __dax_inode;
 	filp->f_mapping = inode->i_mapping;
+	filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping);
 	filp->private_data = dev_dax;
 	inode->i_flags = S_DAX;
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 519599dddd36..4d62fe771587 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1743,6 +1743,7 @@ static int blkdev_open(struct inode * inode, struct file * filp)
 		return -ENOMEM;
 
 	filp->f_mapping = bdev->bd_inode->i_mapping;
+	filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping);
 
 	return blkdev_get(bdev, filp->f_mode, filp);
 }
diff --git a/fs/file_table.c b/fs/file_table.c
index 954d510b765a..72e861a35a7f 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -168,6 +168,7 @@ struct file *alloc_file(const struct path *path, fmode_t mode,
 	file->f_path = *path;
 	file->f_inode = path->dentry->d_inode;
 	file->f_mapping = path->dentry->d_inode->i_mapping;
+	file->f_wb_err = filemap_sample_wb_err(file->f_mapping);
 	if ((mode & FMODE_READ) &&
 	     likely(fop->read || fop->read_iter))
 		mode |= FMODE_CAN_READ;
diff --git a/fs/open.c b/fs/open.c
index cd0c5be8d012..280d4a963791 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -707,6 +707,9 @@ static int do_dentry_open(struct file *f,
 	f->f_inode = inode;
 	f->f_mapping = inode->i_mapping;
 
+	/* Ensure that we skip any errors that predate opening of the file */
+	f->f_wb_err = filemap_sample_wb_err(f->f_mapping);
+
 	if (unlikely(f->f_flags & O_PATH)) {
 		f->f_mode = FMODE_PATH;
 		f->f_op = &empty_fops;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 74872c0f1c07..b524fd442057 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -30,7 +30,7 @@
 #include <linux/percpu-rwsem.h>
 #include <linux/workqueue.h>
 #include <linux/delayed_call.h>
-
+#include <linux/errseq.h>
 #include <asm/byteorder.h>
 #include <uapi/linux/fs.h>
 
@@ -392,6 +392,7 @@ struct address_space {
 	gfp_t			gfp_mask;	/* implicit gfp mask for allocations */
 	struct list_head	private_list;	/* ditto */
 	void			*private_data;	/* ditto */
+	errseq_t		wb_err;
 } __attribute__((aligned(sizeof(long))));
 	/*
 	 * On most architectures that alignment is already the case; but
@@ -846,6 +847,7 @@ struct file {
 	 * Must not be taken from IRQ context.
 	 */
 	spinlock_t		f_lock;
+	errseq_t		f_wb_err;
 	atomic_long_t		f_count;
 	unsigned int 		f_flags;
 	fmode_t			f_mode;
@@ -2520,6 +2522,62 @@ extern int filemap_fdatawrite_range(struct address_space *mapping,
 				loff_t start, loff_t end);
 extern int filemap_check_errors(struct address_space *mapping);
 
+extern void __filemap_set_wb_err(struct address_space *mapping, int err);
+extern int __must_check file_check_and_advance_wb_err(struct file *file);
+extern int __must_check file_write_and_wait_range(struct file *file,
+						loff_t start, loff_t end);
+
+/**
+ * filemap_set_wb_err - set a writeback error on an address_space
+ * @mapping: mapping in which to set writeback error
+ * @err: error to be set in mapping
+ *
+ * When writeback fails in some way, we must record that error so that
+ * userspace can be informed when fsync and the like are called.  We endeavor
+ * to report errors on any file that was open at the time of the error.  Some
+ * internal callers also need to know when writeback errors have occurred.
+ *
+ * When a writeback error occurs, most filesystems will want to call
+ * filemap_set_wb_err to record the error in the mapping so that it will be
+ * automatically reported whenever fsync is called on the file.
+ *
+ * FIXME: mention FS_* flag here?
+ */
+static inline void filemap_set_wb_err(struct address_space *mapping, int err)
+{
+	/* Fastpath for common case of no error */
+	if (unlikely(err))
+		__filemap_set_wb_err(mapping, err);
+}
+
+/**
+ * filemap_check_wb_error - has an error occurred since the mark was sampled?
+ * @mapping: mapping to check for writeback errors
+ * @since: previously-sampled errseq_t
+ *
+ * Grab the errseq_t value from the mapping, and see if it has changed "since"
+ * the given value was sampled.
+ *
+ * If it has then report the latest error set, otherwise return 0.
+ */
+static inline int filemap_check_wb_err(struct address_space *mapping,
+					errseq_t since)
+{
+	return errseq_check(&mapping->wb_err, since);
+}
+
+/**
+ * filemap_sample_wb_err - sample the current errseq_t to test for later errors
+ * @mapping: mapping to be sampled
+ *
+ * Writeback errors are always reported relative to a particular sample point
+ * in the past. This function provides those sample points.
+ */
+static inline errseq_t filemap_sample_wb_err(struct address_space *mapping)
+{
+	return errseq_sample(&mapping->wb_err);
+}
+
 extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
 			   int datasync);
 extern int vfs_fsync(struct file *file, int datasync);
diff --git a/include/trace/events/filemap.h b/include/trace/events/filemap.h
index 42febb6bc1d5..ff91325b8123 100644
--- a/include/trace/events/filemap.h
+++ b/include/trace/events/filemap.h
@@ -10,6 +10,7 @@
 #include <linux/memcontrol.h>
 #include <linux/device.h>
 #include <linux/kdev_t.h>
+#include <linux/errseq.h>
 
 DECLARE_EVENT_CLASS(mm_filemap_op_page_cache,
 
@@ -52,6 +53,62 @@ DEFINE_EVENT(mm_filemap_op_page_cache, mm_filemap_add_to_page_cache,
 	TP_ARGS(page)
 	);
 
+TRACE_EVENT(filemap_set_wb_err,
+		TP_PROTO(struct address_space *mapping, errseq_t eseq),
+
+		TP_ARGS(mapping, eseq),
+
+		TP_STRUCT__entry(
+			__field(unsigned long, i_ino)
+			__field(dev_t, s_dev)
+			__field(errseq_t, errseq)
+		),
+
+		TP_fast_assign(
+			__entry->i_ino = mapping->host->i_ino;
+			__entry->errseq = eseq;
+			if (mapping->host->i_sb)
+				__entry->s_dev = mapping->host->i_sb->s_dev;
+			else
+				__entry->s_dev = mapping->host->i_rdev;
+		),
+
+		TP_printk("dev=%d:%d ino=0x%lx errseq=0x%x",
+			MAJOR(__entry->s_dev), MINOR(__entry->s_dev),
+			__entry->i_ino, __entry->errseq)
+);
+
+TRACE_EVENT(file_check_and_advance_wb_err,
+		TP_PROTO(struct file *file, errseq_t old),
+
+		TP_ARGS(file, old),
+
+		TP_STRUCT__entry(
+			__field(struct file *, file);
+			__field(unsigned long, i_ino)
+			__field(dev_t, s_dev)
+			__field(errseq_t, old)
+			__field(errseq_t, new)
+		),
+
+		TP_fast_assign(
+			__entry->file = file;
+			__entry->i_ino = file->f_mapping->host->i_ino;
+			if (file->f_mapping->host->i_sb)
+				__entry->s_dev =
+					file->f_mapping->host->i_sb->s_dev;
+			else
+				__entry->s_dev =
+					file->f_mapping->host->i_rdev;
+			__entry->old = old;
+			__entry->new = file->f_wb_err;
+		),
+
+		TP_printk("file=%p dev=%d:%d ino=0x%lx old=0x%x new=0x%x",
+			__entry->file, MAJOR(__entry->s_dev),
+			MINOR(__entry->s_dev), __entry->i_ino, __entry->old,
+			__entry->new)
+);
 #endif /* _TRACE_FILEMAP_H */
 
 /* This part must be outside protection */
diff --git a/mm/filemap.c b/mm/filemap.c
index eb99b5f23c61..5d03381dc0e0 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -553,6 +553,92 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 }
 EXPORT_SYMBOL(filemap_write_and_wait_range);
 
+void __filemap_set_wb_err(struct address_space *mapping, int err)
+{
+	errseq_t eseq = __errseq_set(&mapping->wb_err, err);
+
+	trace_filemap_set_wb_err(mapping, eseq);
+}
+EXPORT_SYMBOL(__filemap_set_wb_err);
+
+/**
+ * file_check_and_advance_wb_err - report wb error (if any) that was previously
+ * 				   and advance wb_err to current one
+ * @file: struct file on which the error is being reported
+ *
+ * When userland calls fsync (or something like nfsd does the equivalent), we
+ * want to report any writeback errors that occurred since the last fsync (or
+ * since the file was opened if there haven't been any).
+ *
+ * Grab the wb_err from the mapping. If it matches what we have in the file,
+ * then just quickly return 0. The file is all caught up.
+ *
+ * If it doesn't match, then take the mapping value, set the "seen" flag in
+ * it and try to swap it into place. If it works, or another task beat us
+ * to it with the new value, then update the f_wb_err and return the error
+ * portion. The error at this point must be reported via proper channels
+ * (a'la fsync, or NFS COMMIT operation, etc.).
+ *
+ * While we handle mapping->wb_err with atomic operations, the f_wb_err
+ * value is protected by the f_lock since we must ensure that it reflects
+ * the latest value swapped in for this file descriptor.
+ */
+int file_check_and_advance_wb_err(struct file *file)
+{
+	int err = 0;
+	errseq_t old = READ_ONCE(file->f_wb_err);
+	struct address_space *mapping = file->f_mapping;
+
+	/* Locklessly handle the common case where nothing has changed */
+	if (errseq_check(&mapping->wb_err, old)) {
+		/* Something changed, must use slow path */
+		spin_lock(&file->f_lock);
+		old = file->f_wb_err;
+		err = errseq_check_and_advance(&mapping->wb_err,
+						&file->f_wb_err);
+		trace_file_check_and_advance_wb_err(file, old);
+		spin_unlock(&file->f_lock);
+	}
+	return err;
+}
+EXPORT_SYMBOL(file_check_and_advance_wb_err);
+
+/**
+ * file_write_and_wait_range - write out & wait on a file range
+ * @file:	file pointing to address_space with pages
+ * @lstart:	offset in bytes where the range starts
+ * @lend:	offset in bytes where the range ends (inclusive)
+ *
+ * Write out and wait upon file offsets lstart->lend, inclusive.
+ *
+ * Note that @lend is inclusive (describes the last byte to be written) so
+ * that this function can be used to write to the very end-of-file (end = -1).
+ *
+ * After writing out and waiting on the data, we check and advance the
+ * f_wb_err cursor to the latest value, and return any errors detected there.
+ */
+int file_write_and_wait_range(struct file *file, loff_t lstart, loff_t lend)
+{
+	int err = 0;
+	struct address_space *mapping = file->f_mapping;
+
+	if ((!dax_mapping(mapping) && mapping->nrpages) ||
+	    (dax_mapping(mapping) && mapping->nrexceptional)) {
+		int err2;
+
+		err = __filemap_fdatawrite_range(mapping, lstart, lend,
+						 WB_SYNC_ALL);
+		/* See comment of filemap_write_and_wait() */
+		if (err != -EIO)
+			__filemap_fdatawait_range(mapping, lstart, lend);
+		err2 = file_check_and_advance_wb_err(file);
+		if (!err)
+			err = err2;
+	}
+	return err;
+}
+EXPORT_SYMBOL(file_write_and_wait_range);
+
 /**
  * replace_page_cache_page - replace a pagecache page with a new one
  * @old:	page to be replaced
-- 
2.13.0

WARNING: multiple messages have this Message-ID (diff)
From: jlayton@kernel.org
To: Andrew Morton <akpm@linux-foundation.org>,
	Al Viro <viro@ZenIV.linux.org.uk>, Jan Kara <jack@suse.cz>,
	tytso@mit.edu, axboe@kernel.dk, mawilcox@microsoft.com,
	ross.zwisler@linux.intel.com, corbet@lwn.net,
	Chris Mason <clm@fb.com>, Josef Bacik <jbacik@fb.com>,
	David Sterba <dsterba@suse.com>,
	"Darrick J . Wong" <darrick.wong@oracle.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>,
	Eryu Guan <eguan@redhat.com>, David Howells <dhowells@redhat.com>,
	Christoph Hellwig <hch@infradead.org>,
	Liu Bo <bo.li.liu@oracle.com>,
	linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
	linux-ext4@vger.kernel.org, linux-xfs@vger.kernel.org,
	linux-btrfs@vger.kernel.org, linux-block@vger.kernel.org
Subject: [PATCH v8 10/18] fs: new infrastructure for writeback error handling and reporting
Date: Thu, 29 Jun 2017 09:19:46 -0400	[thread overview]
Message-ID: <20170629131954.28733-11-jlayton@kernel.org> (raw)
In-Reply-To: <20170629131954.28733-1-jlayton@kernel.org>

From: Jeff Layton <jlayton@redhat.com>

Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.

The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.

If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.

This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.

In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.

One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.

This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.

This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).

Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.

The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
---
 drivers/dax/device.c           |  1 +
 fs/block_dev.c                 |  1 +
 fs/file_table.c                |  1 +
 fs/open.c                      |  3 ++
 include/linux/fs.h             | 60 ++++++++++++++++++++++++++++-
 include/trace/events/filemap.h | 57 ++++++++++++++++++++++++++++
 mm/filemap.c                   | 86 ++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 208 insertions(+), 1 deletion(-)

diff --git a/drivers/dax/device.c b/drivers/dax/device.c
index 006e657dfcb9..12943d19bfc4 100644
--- a/drivers/dax/device.c
+++ b/drivers/dax/device.c
@@ -499,6 +499,7 @@ static int dax_open(struct inode *inode, struct file *filp)
 	inode->i_mapping = __dax_inode->i_mapping;
 	inode->i_mapping->host = __dax_inode;
 	filp->f_mapping = inode->i_mapping;
+	filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping);
 	filp->private_data = dev_dax;
 	inode->i_flags = S_DAX;
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 519599dddd36..4d62fe771587 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1743,6 +1743,7 @@ static int blkdev_open(struct inode * inode, struct file * filp)
 		return -ENOMEM;
 
 	filp->f_mapping = bdev->bd_inode->i_mapping;
+	filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping);
 
 	return blkdev_get(bdev, filp->f_mode, filp);
 }
diff --git a/fs/file_table.c b/fs/file_table.c
index 954d510b765a..72e861a35a7f 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -168,6 +168,7 @@ struct file *alloc_file(const struct path *path, fmode_t mode,
 	file->f_path = *path;
 	file->f_inode = path->dentry->d_inode;
 	file->f_mapping = path->dentry->d_inode->i_mapping;
+	file->f_wb_err = filemap_sample_wb_err(file->f_mapping);
 	if ((mode & FMODE_READ) &&
 	     likely(fop->read || fop->read_iter))
 		mode |= FMODE_CAN_READ;
diff --git a/fs/open.c b/fs/open.c
index cd0c5be8d012..280d4a963791 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -707,6 +707,9 @@ static int do_dentry_open(struct file *f,
 	f->f_inode = inode;
 	f->f_mapping = inode->i_mapping;
 
+	/* Ensure that we skip any errors that predate opening of the file */
+	f->f_wb_err = filemap_sample_wb_err(f->f_mapping);
+
 	if (unlikely(f->f_flags & O_PATH)) {
 		f->f_mode = FMODE_PATH;
 		f->f_op = &empty_fops;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 74872c0f1c07..b524fd442057 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -30,7 +30,7 @@
 #include <linux/percpu-rwsem.h>
 #include <linux/workqueue.h>
 #include <linux/delayed_call.h>
-
+#include <linux/errseq.h>
 #include <asm/byteorder.h>
 #include <uapi/linux/fs.h>
 
@@ -392,6 +392,7 @@ struct address_space {
 	gfp_t			gfp_mask;	/* implicit gfp mask for allocations */
 	struct list_head	private_list;	/* ditto */
 	void			*private_data;	/* ditto */
+	errseq_t		wb_err;
 } __attribute__((aligned(sizeof(long))));
 	/*
 	 * On most architectures that alignment is already the case; but
@@ -846,6 +847,7 @@ struct file {
 	 * Must not be taken from IRQ context.
 	 */
 	spinlock_t		f_lock;
+	errseq_t		f_wb_err;
 	atomic_long_t		f_count;
 	unsigned int 		f_flags;
 	fmode_t			f_mode;
@@ -2520,6 +2522,62 @@ extern int filemap_fdatawrite_range(struct address_space *mapping,
 				loff_t start, loff_t end);
 extern int filemap_check_errors(struct address_space *mapping);
 
+extern void __filemap_set_wb_err(struct address_space *mapping, int err);
+extern int __must_check file_check_and_advance_wb_err(struct file *file);
+extern int __must_check file_write_and_wait_range(struct file *file,
+						loff_t start, loff_t end);
+
+/**
+ * filemap_set_wb_err - set a writeback error on an address_space
+ * @mapping: mapping in which to set writeback error
+ * @err: error to be set in mapping
+ *
+ * When writeback fails in some way, we must record that error so that
+ * userspace can be informed when fsync and the like are called.  We endeavor
+ * to report errors on any file that was open at the time of the error.  Some
+ * internal callers also need to know when writeback errors have occurred.
+ *
+ * When a writeback error occurs, most filesystems will want to call
+ * filemap_set_wb_err to record the error in the mapping so that it will be
+ * automatically reported whenever fsync is called on the file.
+ *
+ * FIXME: mention FS_* flag here?
+ */
+static inline void filemap_set_wb_err(struct address_space *mapping, int err)
+{
+	/* Fastpath for common case of no error */
+	if (unlikely(err))
+		__filemap_set_wb_err(mapping, err);
+}
+
+/**
+ * filemap_check_wb_error - has an error occurred since the mark was sampled?
+ * @mapping: mapping to check for writeback errors
+ * @since: previously-sampled errseq_t
+ *
+ * Grab the errseq_t value from the mapping, and see if it has changed "since"
+ * the given value was sampled.
+ *
+ * If it has then report the latest error set, otherwise return 0.
+ */
+static inline int filemap_check_wb_err(struct address_space *mapping,
+					errseq_t since)
+{
+	return errseq_check(&mapping->wb_err, since);
+}
+
+/**
+ * filemap_sample_wb_err - sample the current errseq_t to test for later errors
+ * @mapping: mapping to be sampled
+ *
+ * Writeback errors are always reported relative to a particular sample point
+ * in the past. This function provides those sample points.
+ */
+static inline errseq_t filemap_sample_wb_err(struct address_space *mapping)
+{
+	return errseq_sample(&mapping->wb_err);
+}
+
 extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
 			   int datasync);
 extern int vfs_fsync(struct file *file, int datasync);
diff --git a/include/trace/events/filemap.h b/include/trace/events/filemap.h
index 42febb6bc1d5..ff91325b8123 100644
--- a/include/trace/events/filemap.h
+++ b/include/trace/events/filemap.h
@@ -10,6 +10,7 @@
 #include <linux/memcontrol.h>
 #include <linux/device.h>
 #include <linux/kdev_t.h>
+#include <linux/errseq.h>
 
 DECLARE_EVENT_CLASS(mm_filemap_op_page_cache,
 
@@ -52,6 +53,62 @@ DEFINE_EVENT(mm_filemap_op_page_cache, mm_filemap_add_to_page_cache,
 	TP_ARGS(page)
 	);
 
+TRACE_EVENT(filemap_set_wb_err,
+		TP_PROTO(struct address_space *mapping, errseq_t eseq),
+
+		TP_ARGS(mapping, eseq),
+
+		TP_STRUCT__entry(
+			__field(unsigned long, i_ino)
+			__field(dev_t, s_dev)
+			__field(errseq_t, errseq)
+		),
+
+		TP_fast_assign(
+			__entry->i_ino = mapping->host->i_ino;
+			__entry->errseq = eseq;
+			if (mapping->host->i_sb)
+				__entry->s_dev = mapping->host->i_sb->s_dev;
+			else
+				__entry->s_dev = mapping->host->i_rdev;
+		),
+
+		TP_printk("dev=%d:%d ino=0x%lx errseq=0x%x",
+			MAJOR(__entry->s_dev), MINOR(__entry->s_dev),
+			__entry->i_ino, __entry->errseq)
+);
+
+TRACE_EVENT(file_check_and_advance_wb_err,
+		TP_PROTO(struct file *file, errseq_t old),
+
+		TP_ARGS(file, old),
+
+		TP_STRUCT__entry(
+			__field(struct file *, file);
+			__field(unsigned long, i_ino)
+			__field(dev_t, s_dev)
+			__field(errseq_t, old)
+			__field(errseq_t, new)
+		),
+
+		TP_fast_assign(
+			__entry->file = file;
+			__entry->i_ino = file->f_mapping->host->i_ino;
+			if (file->f_mapping->host->i_sb)
+				__entry->s_dev =
+					file->f_mapping->host->i_sb->s_dev;
+			else
+				__entry->s_dev =
+					file->f_mapping->host->i_rdev;
+			__entry->old = old;
+			__entry->new = file->f_wb_err;
+		),
+
+		TP_printk("file=%p dev=%d:%d ino=0x%lx old=0x%x new=0x%x",
+			__entry->file, MAJOR(__entry->s_dev),
+			MINOR(__entry->s_dev), __entry->i_ino, __entry->old,
+			__entry->new)
+);
 #endif /* _TRACE_FILEMAP_H */
 
 /* This part must be outside protection */
diff --git a/mm/filemap.c b/mm/filemap.c
index eb99b5f23c61..5d03381dc0e0 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -553,6 +553,92 @@ int filemap_write_and_wait_range(struct address_space *mapping,
 }
 EXPORT_SYMBOL(filemap_write_and_wait_range);
 
+void __filemap_set_wb_err(struct address_space *mapping, int err)
+{
+	errseq_t eseq = __errseq_set(&mapping->wb_err, err);
+
+	trace_filemap_set_wb_err(mapping, eseq);
+}
+EXPORT_SYMBOL(__filemap_set_wb_err);
+
+/**
+ * file_check_and_advance_wb_err - report wb error (if any) that was previously
+ * 				   and advance wb_err to current one
+ * @file: struct file on which the error is being reported
+ *
+ * When userland calls fsync (or something like nfsd does the equivalent), we
+ * want to report any writeback errors that occurred since the last fsync (or
+ * since the file was opened if there haven't been any).
+ *
+ * Grab the wb_err from the mapping. If it matches what we have in the file,
+ * then just quickly return 0. The file is all caught up.
+ *
+ * If it doesn't match, then take the mapping value, set the "seen" flag in
+ * it and try to swap it into place. If it works, or another task beat us
+ * to it with the new value, then update the f_wb_err and return the error
+ * portion. The error at this point must be reported via proper channels
+ * (a'la fsync, or NFS COMMIT operation, etc.).
+ *
+ * While we handle mapping->wb_err with atomic operations, the f_wb_err
+ * value is protected by the f_lock since we must ensure that it reflects
+ * the latest value swapped in for this file descriptor.
+ */
+int file_check_and_advance_wb_err(struct file *file)
+{
+	int err = 0;
+	errseq_t old = READ_ONCE(file->f_wb_err);
+	struct address_space *mapping = file->f_mapping;
+
+	/* Locklessly handle the common case where nothing has changed */
+	if (errseq_check(&mapping->wb_err, old)) {
+		/* Something changed, must use slow path */
+		spin_lock(&file->f_lock);
+		old = file->f_wb_err;
+		err = errseq_check_and_advance(&mapping->wb_err,
+						&file->f_wb_err);
+		trace_file_check_and_advance_wb_err(file, old);
+		spin_unlock(&file->f_lock);
+	}
+	return err;
+}
+EXPORT_SYMBOL(file_check_and_advance_wb_err);
+
+/**
+ * file_write_and_wait_range - write out & wait on a file range
+ * @file:	file pointing to address_space with pages
+ * @lstart:	offset in bytes where the range starts
+ * @lend:	offset in bytes where the range ends (inclusive)
+ *
+ * Write out and wait upon file offsets lstart->lend, inclusive.
+ *
+ * Note that @lend is inclusive (describes the last byte to be written) so
+ * that this function can be used to write to the very end-of-file (end = -1).
+ *
+ * After writing out and waiting on the data, we check and advance the
+ * f_wb_err cursor to the latest value, and return any errors detected there.
+ */
+int file_write_and_wait_range(struct file *file, loff_t lstart, loff_t lend)
+{
+	int err = 0;
+	struct address_space *mapping = file->f_mapping;
+
+	if ((!dax_mapping(mapping) && mapping->nrpages) ||
+	    (dax_mapping(mapping) && mapping->nrexceptional)) {
+		int err2;
+
+		err = __filemap_fdatawrite_range(mapping, lstart, lend,
+						 WB_SYNC_ALL);
+		/* See comment of filemap_write_and_wait() */
+		if (err != -EIO)
+			__filemap_fdatawait_range(mapping, lstart, lend);
+		err2 = file_check_and_advance_wb_err(file);
+		if (!err)
+			err = err2;
+	}
+	return err;
+}
+EXPORT_SYMBOL(file_write_and_wait_range);
+
 /**
  * replace_page_cache_page - replace a pagecache page with a new one
  * @old:	page to be replaced
-- 
2.13.0

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2017-06-29 13:19 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-29 13:19 [PATCH v8 00/18] fs: enhanced writeback error reporting with errseq_t (pile #1) jlayton
2017-06-29 13:19 ` jlayton
2017-06-29 13:19 ` [PATCH v8 01/18] fs: remove call_fsync helper function jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 02/18] buffer: use mapping_set_error instead of setting the flag jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 03/18] fs: check for writeback errors after syncing out buffers in generic_file_fsync jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 14:19   ` Christoph Hellwig
2017-06-29 14:19     ` Christoph Hellwig
2017-06-29 20:17     ` Jeff Layton
2017-06-29 20:17       ` Jeff Layton
2017-06-29 20:17       ` Jeff Layton
2017-06-29 20:17       ` Jeff Layton
2017-06-29 13:19 ` [PATCH v8 04/18] buffer: set errors in mapping at the time that the error occurs jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 05/18] jbd2: don't clear and reset errors after waiting on writeback jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 06/18] mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 07/18] mm: don't TestClearPageError in __filemap_fdatawait_range jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 08/18] mm: clean up error handling in write_one_page jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 09/18] lib: add errseq_t type and infrastructure for handling it jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` jlayton [this message]
2017-06-29 13:19   ` [PATCH v8 10/18] fs: new infrastructure for writeback error handling and reporting jlayton
2017-06-29 13:45   ` Jeff Layton
2017-06-29 13:45     ` Jeff Layton
2017-06-29 13:45     ` Jeff Layton
2017-06-29 13:45     ` Jeff Layton
2017-06-29 17:52   ` Jeff Layton
2017-06-29 17:52     ` Jeff Layton
2017-06-29 17:52     ` Jeff Layton
2017-06-29 17:52     ` Jeff Layton
2017-06-29 13:19 ` [PATCH v8 11/18] mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 12/18] Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 17:11   ` Darrick J. Wong
2017-06-29 17:11     ` Darrick J. Wong
2017-06-29 18:13     ` Jeff Layton
2017-06-29 18:13       ` Jeff Layton
2017-06-29 18:13       ` Jeff Layton
2017-06-29 18:13       ` Jeff Layton
2017-06-29 18:21       ` Matthew Wilcox
2017-06-29 18:21         ` Matthew Wilcox
2017-06-29 18:21         ` Matthew Wilcox
2017-06-29 20:42         ` Jeff Layton
2017-06-29 20:42           ` Jeff Layton
2017-06-29 20:42           ` Jeff Layton
2017-06-29 20:42           ` Jeff Layton
2017-06-29 20:42           ` Jeff Layton
2017-06-29 13:19 ` [PATCH v8 13/18] dax: set errors in mapping when writeback fails jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 14/18] block: convert to errseq_t based writeback error tracking jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 14:18   ` Christoph Hellwig
2017-06-29 14:18     ` Christoph Hellwig
2017-06-29 13:19 ` [PATCH v8 15/18] fs: convert __generic_file_fsync to use errseq_t based reporting jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 13:19 ` [PATCH v8 16/18] ext4: use errseq_t based error handling for reporting data writeback errors jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 14:12   ` Christoph Hellwig
2017-06-29 14:12     ` Christoph Hellwig
2017-06-29 20:26     ` Jeff Layton
2017-06-29 20:26       ` Jeff Layton
2017-06-29 20:26       ` Jeff Layton
2017-06-29 20:26       ` Jeff Layton
2017-06-29 13:19 ` [PATCH v8 17/18] xfs: minimal conversion to errseq_t writeback error reporting jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 14:12   ` Christoph Hellwig
2017-06-29 14:12     ` Christoph Hellwig
2017-06-30 16:45     ` Jeff Layton
2017-06-30 16:45       ` Jeff Layton
2017-06-30 16:45       ` Jeff Layton
2017-06-30 16:45       ` Jeff Layton
2017-06-30 16:49       ` Christoph Hellwig
2017-06-30 16:49         ` Christoph Hellwig
2017-06-29 17:13   ` Darrick J. Wong
2017-06-29 17:13     ` Darrick J. Wong
2017-06-29 13:19 ` [PATCH v8 18/18] btrfs: minimal conversion to errseq_t writeback error reporting on fsync jlayton
2017-06-29 13:19   ` jlayton
2017-06-29 14:17   ` Christoph Hellwig
2017-06-29 14:17     ` Christoph Hellwig
2017-06-29 20:32     ` Jeff Layton
2017-06-29 20:32       ` Jeff Layton
2017-06-29 20:32       ` Jeff Layton
2017-06-29 20:32       ` Jeff Layton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170629131954.28733-11-jlayton@kernel.org \
    --to=jlayton@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=axboe@kernel.dk \
    --cc=bo.li.liu@oracle.com \
    --cc=clm@fb.com \
    --cc=cmaiolino@redhat.com \
    --cc=corbet@lwn.net \
    --cc=darrick.wong@oracle.com \
    --cc=dhowells@redhat.com \
    --cc=dsterba@suse.com \
    --cc=eguan@redhat.com \
    --cc=hch@infradead.org \
    --cc=jack@suse.cz \
    --cc=jbacik@fb.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=mawilcox@microsoft.com \
    --cc=ross.zwisler@linux.intel.com \
    --cc=tytso@mit.edu \
    --cc=viro@ZenIV.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.