* [PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
@ 2017-06-30 10:08 ` Varadarajan Narayanan
0 siblings, 0 replies; 5+ messages in thread
From: Varadarajan Narayanan @ 2017-06-30 10:08 UTC (permalink / raw)
To: andy.gross, david.brown, robh+dt, mark.rutland, linux,
linux-arm-msm, linux-soc, devicetree, linux-arm-kernel,
linux-kernel
Cc: Varadarajan Narayanan
The node for xo and timer belong to the SoC DTS file.
Else, new board DT files may not inherit these nodes.
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 19 -------------------
arch/arm/boot/dts/qcom-ipq4019.dtsi | 14 ++++++++++++++
2 files changed, 14 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index b9457dd..b74c113 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -20,26 +20,7 @@
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
compatible = "qcom,ipq4019";
- clocks {
- xo: xo {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
- };
-
soc {
-
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
- clock-frequency = <48000000>;
- };
-
pinctrl@0x01000000 {
serial_pins: serial_pinmux {
mux {
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b7a24af..e8ab1e1 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -96,6 +96,11 @@
clock-frequency = <32768>;
#clock-cells = <0>;
};
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
};
soc {
@@ -104,6 +109,15 @@
ranges;
compatible = "simple-bus";
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <48000000>;
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
@ 2017-06-30 10:08 ` Varadarajan Narayanan
0 siblings, 0 replies; 5+ messages in thread
From: Varadarajan Narayanan @ 2017-06-30 10:08 UTC (permalink / raw)
To: linux-arm-kernel
The node for xo and timer belong to the SoC DTS file.
Else, new board DT files may not inherit these nodes.
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 19 -------------------
arch/arm/boot/dts/qcom-ipq4019.dtsi | 14 ++++++++++++++
2 files changed, 14 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index b9457dd..b74c113 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -20,26 +20,7 @@
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
compatible = "qcom,ipq4019";
- clocks {
- xo: xo {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
- };
-
soc {
-
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
- clock-frequency = <48000000>;
- };
-
pinctrl at 0x01000000 {
serial_pins: serial_pinmux {
mux {
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b7a24af..e8ab1e1 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -96,6 +96,11 @@
clock-frequency = <32768>;
#clock-cells = <0>;
};
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
};
soc {
@@ -104,6 +109,15 @@
ranges;
compatible = "simple-bus";
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <48000000>;
+ };
+
intc: interrupt-controller at b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
2017-06-30 10:08 ` Varadarajan Narayanan
(?)
@ 2017-06-30 17:17 ` Stephen Boyd
-1 siblings, 0 replies; 5+ messages in thread
From: Stephen Boyd @ 2017-06-30 17:17 UTC (permalink / raw)
To: Varadarajan Narayanan
Cc: andy.gross-QSEj5FYQhm4dnm+yROfE0A,
david.brown-QSEj5FYQhm4dnm+yROfE0A,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
linux-I+IVW8TIWO2tmTQ+vhA3Yw,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA,
linux-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 06/30, Varadarajan Narayanan wrote:
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> index b9457dd..b74c113 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> @@ -20,26 +20,7 @@
> model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
> compatible = "qcom,ipq4019";
>
> - clocks {
> - xo: xo {
> - compatible = "fixed-clock";
> - clock-frequency = <48000000>;
> - #clock-cells = <0>;
> - };
> - };
> -
> soc {
> -
> -
> - timer {
> - compatible = "arm,armv7-timer";
> - interrupts = <1 2 0xf08>,
> - <1 3 0xf08>,
> - <1 4 0xf08>,
> - <1 1 0xf08>;
> - clock-frequency = <48000000>;
> - };
> -
> pinctrl@0x01000000 {
This should be pinctrl@1000000 { and fixed in another patch.
> serial_pins: serial_pinmux {
> mux {
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index b7a24af..e8ab1e1 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -96,6 +96,11 @@
> clock-frequency = <32768>;
> #clock-cells = <0>;
> };
> + xo: xo {
Please add a newline so it isn't right next to the previous node.
> + compatible = "fixed-clock";
> + clock-frequency = <48000000>;
> + #clock-cells = <0>;
> + };
> };
>
> soc {
> @@ -104,6 +109,15 @@
> ranges;
> compatible = "simple-bus";
>
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 4 0xf08>,
> + <1 1 0xf08>;
> + clock-frequency = <48000000>;
> + };
This should be outside of the soc node.
> +
> intc: interrupt-controller@b000000 {
> compatible = "qcom,msm-qgic2";
> interrupt-controller;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
@ 2017-06-30 17:17 ` Stephen Boyd
0 siblings, 0 replies; 5+ messages in thread
From: Stephen Boyd @ 2017-06-30 17:17 UTC (permalink / raw)
To: Varadarajan Narayanan
Cc: andy.gross, david.brown, robh+dt, mark.rutland, linux,
linux-arm-msm, linux-soc, devicetree, linux-arm-kernel,
linux-kernel
On 06/30, Varadarajan Narayanan wrote:
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> index b9457dd..b74c113 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> @@ -20,26 +20,7 @@
> model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
> compatible = "qcom,ipq4019";
>
> - clocks {
> - xo: xo {
> - compatible = "fixed-clock";
> - clock-frequency = <48000000>;
> - #clock-cells = <0>;
> - };
> - };
> -
> soc {
> -
> -
> - timer {
> - compatible = "arm,armv7-timer";
> - interrupts = <1 2 0xf08>,
> - <1 3 0xf08>,
> - <1 4 0xf08>,
> - <1 1 0xf08>;
> - clock-frequency = <48000000>;
> - };
> -
> pinctrl@0x01000000 {
This should be pinctrl@1000000 { and fixed in another patch.
> serial_pins: serial_pinmux {
> mux {
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index b7a24af..e8ab1e1 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -96,6 +96,11 @@
> clock-frequency = <32768>;
> #clock-cells = <0>;
> };
> + xo: xo {
Please add a newline so it isn't right next to the previous node.
> + compatible = "fixed-clock";
> + clock-frequency = <48000000>;
> + #clock-cells = <0>;
> + };
> };
>
> soc {
> @@ -104,6 +109,15 @@
> ranges;
> compatible = "simple-bus";
>
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 4 0xf08>,
> + <1 1 0xf08>;
> + clock-frequency = <48000000>;
> + };
This should be outside of the soc node.
> +
> intc: interrupt-controller@b000000 {
> compatible = "qcom,msm-qgic2";
> interrupt-controller;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
@ 2017-06-30 17:17 ` Stephen Boyd
0 siblings, 0 replies; 5+ messages in thread
From: Stephen Boyd @ 2017-06-30 17:17 UTC (permalink / raw)
To: linux-arm-kernel
On 06/30, Varadarajan Narayanan wrote:
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> index b9457dd..b74c113 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> @@ -20,26 +20,7 @@
> model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
> compatible = "qcom,ipq4019";
>
> - clocks {
> - xo: xo {
> - compatible = "fixed-clock";
> - clock-frequency = <48000000>;
> - #clock-cells = <0>;
> - };
> - };
> -
> soc {
> -
> -
> - timer {
> - compatible = "arm,armv7-timer";
> - interrupts = <1 2 0xf08>,
> - <1 3 0xf08>,
> - <1 4 0xf08>,
> - <1 1 0xf08>;
> - clock-frequency = <48000000>;
> - };
> -
> pinctrl at 0x01000000 {
This should be pinctrl at 1000000 { and fixed in another patch.
> serial_pins: serial_pinmux {
> mux {
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index b7a24af..e8ab1e1 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -96,6 +96,11 @@
> clock-frequency = <32768>;
> #clock-cells = <0>;
> };
> + xo: xo {
Please add a newline so it isn't right next to the previous node.
> + compatible = "fixed-clock";
> + clock-frequency = <48000000>;
> + #clock-cells = <0>;
> + };
> };
>
> soc {
> @@ -104,6 +109,15 @@
> ranges;
> compatible = "simple-bus";
>
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 4 0xf08>,
> + <1 1 0xf08>;
> + clock-frequency = <48000000>;
> + };
This should be outside of the soc node.
> +
> intc: interrupt-controller at b000000 {
> compatible = "qcom,msm-qgic2";
> interrupt-controller;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-06-30 17:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-30 10:08 [PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi Varadarajan Narayanan
2017-06-30 10:08 ` Varadarajan Narayanan
[not found] ` <1498817281-30608-1-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-06-30 17:17 ` Stephen Boyd
2017-06-30 17:17 ` Stephen Boyd
2017-06-30 17:17 ` Stephen Boyd
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.