[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

	Hi Magnus, Mark, Rob, Simon,

The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
ICRAM1.

This patch series adds support to specify this region from DT.  It
consists of 3 parts:
  - DT binding documentation for reserving SRAM for the jump stub,
  - A platform code update to retrieve the information from DT, if
    present (of course backwards-compatibility with old DTBs is
    preserved),
  - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
    RZ/G1 SoCs.

The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
Add Inter Connect RAM".

Note that the current jump stub in Linux is 12 bytes long.  The patches
reserve 16 bytes of SRAM.  Should this be increased?  The mapping
granularity is PAGE_SIZE anyway.

Thanks for your comments!

Geert Uytterhoeven (9):
  dt-bindings: sram: Document renesas,smp-sram
  ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
  ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub

 .../devicetree/bindings/sram/renesas,smp-sram.txt  | 27 ++++++++++++++++++
 arch/arm/boot/dts/r8a7743.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7745.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7790.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7791.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7792.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7793.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7794.dtsi                     |  8 ++++++
 arch/arm/mach-shmobile/pm-rcar-gen2.c              | 33 ++++++++++++++++++++--
 9 files changed, 113 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt

-- 
2.7.4

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

	Hi Magnus, Mark, Rob, Simon,

The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
ICRAM1.

This patch series adds support to specify this region from DT.  It
consists of 3 parts:
  - DT binding documentation for reserving SRAM for the jump stub,
  - A platform code update to retrieve the information from DT, if
    present (of course backwards-compatibility with old DTBs is
    preserved),
  - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
    RZ/G1 SoCs.

The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
Add Inter Connect RAM".

Note that the current jump stub in Linux is 12 bytes long.  The patches
reserve 16 bytes of SRAM.  Should this be increased?  The mapping
granularity is PAGE_SIZE anyway.

Thanks for your comments!

Geert Uytterhoeven (9):
  dt-bindings: sram: Document renesas,smp-sram
  ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
  ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub

 .../devicetree/bindings/sram/renesas,smp-sram.txt  | 27 ++++++++++++++++++
 arch/arm/boot/dts/r8a7743.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7745.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7790.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7791.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7792.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7793.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7794.dtsi                     |  8 ++++++
 arch/arm/mach-shmobile/pm-rcar-gen2.c              | 33 ++++++++++++++++++++--
 9 files changed, 113 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt

-- 
2.7.4

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

	Hi Magnus, Mark, Rob, Simon,

The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
ICRAM1.

This patch series adds support to specify this region from DT.  It
consists of 3 parts:
  - DT binding documentation for reserving SRAM for the jump stub,
  - A platform code update to retrieve the information from DT, if
    present (of course backwards-compatibility with old DTBs is
    preserved),
  - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
    RZ/G1 SoCs.

The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
Add Inter Connect RAM".

Note that the current jump stub in Linux is 12 bytes long.  The patches
reserve 16 bytes of SRAM.  Should this be increased?  The mapping
granularity is PAGE_SIZE anyway.

Thanks for your comments!

Geert Uytterhoeven (9):
  dt-bindings: sram: Document renesas,smp-sram
  ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
  ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
  ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub

 .../devicetree/bindings/sram/renesas,smp-sram.txt  | 27 ++++++++++++++++++
 arch/arm/boot/dts/r8a7743.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7745.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7790.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7791.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7792.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7793.dtsi                     |  8 ++++++
 arch/arm/boot/dts/r8a7794.dtsi                     |  8 ++++++
 arch/arm/mach-shmobile/pm-rcar-gen2.c              | 33 ++++++++++++++++++++--
 9 files changed, 113 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt

-- 
2.7.4

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH 1/9] dt-bindings: sram: Document renesas,smp-sram

[Geert Uytterhoeven]

Document reserved SRAM for the SMP jump stub on Renesas R-Car Gen2 and
RZ/G1 SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../devicetree/bindings/sram/renesas,smp-sram.txt  | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt

diff --git a/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt b/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt
new file mode 100644
index 0000000000000000..712d05e3e15eeb65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt
@@ -0,0 +1,27 @@
+* Renesas SMP SRAM
+
+Renesas R-Car Gen2 and RZ/G1 SoCs need a small piece of SRAM for the jump stub
+for secondary CPU bringup and CPU hotplug.
+This memory is reserved by adding a child node to a "mmio-sram" node, cfr.
+Documentation/devicetree/bindings/sram/sram.txt.
+
+Required child node properties:
+  - compatible: Must be "renesas,smp-sram",
+  - reg: Address and length of the reserved SRAM.
+    The full physical (bus) address must be aligned to a 256 KiB boundary.
+
+
+Example:
+
+	icram1:	sram@e63c0000 {
+		compatible = "mmio-sram";
+		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram@0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
+	};
-- 
2.7.4

[PATCH 1/9] dt-bindings: sram: Document renesas,smp-sram

[Geert Uytterhoeven]

Document reserved SRAM for the SMP jump stub on Renesas R-Car Gen2 and
RZ/G1 SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 .../devicetree/bindings/sram/renesas,smp-sram.txt  | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt

diff --git a/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt b/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt
new file mode 100644
index 0000000000000000..712d05e3e15eeb65
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/renesas,smp-sram.txt
@@ -0,0 +1,27 @@
+* Renesas SMP SRAM
+
+Renesas R-Car Gen2 and RZ/G1 SoCs need a small piece of SRAM for the jump stub
+for secondary CPU bringup and CPU hotplug.
+This memory is reserved by adding a child node to a "mmio-sram" node, cfr.
+Documentation/devicetree/bindings/sram/sram.txt.
+
+Required child node properties:
+  - compatible: Must be "renesas,smp-sram",
+  - reg: Address and length of the reserved SRAM.
+    The full physical (bus) address must be aligned to a 256 KiB boundary.
+
+
+Example:
+
+	icram1:	sram at e63c0000 {
+		compatible = "mmio-sram";
+		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram at 0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
+	};
-- 
2.7.4

[PATCH 2/9] ARM: shmobile: rcar-gen2: Obtain jump stub region from DT

[Geert Uytterhoeven]

Add support for obtaining from DT the SRAM region to store the jump stub
for CPU core bringup, according to the renesas,smp-sram DT bindings.

If no region is specified in DT, the code falls back to hardcoded ICRAM1
as before, to maintain backwards compatibility.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/mach-shmobile/pm-rcar-gen2.c | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 0178da7ace82dcbd..e5f215c8b218100a 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -11,7 +11,9 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/ioport.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
@@ -69,8 +71,9 @@ void __init rcar_gen2_pm_init(void)
 	struct device_node *np, *cpus;
 	bool has_a7 = false;
 	bool has_a15 = false;
-	phys_addr_t boot_vector_addr = ICRAM1;
+	struct resource res;
 	u32 syscier = 0;
+	int error;
 
 	if (once++)
 		return;
@@ -91,14 +94,38 @@ void __init rcar_gen2_pm_init(void)
 	else if (of_machine_is_compatible("renesas,r8a7791"))
 		syscier = 0x00111003;
 
+	np = of_find_compatible_node(NULL, NULL, "renesas,smp-sram");
+	if (!np) {
+		/* No smp-sram in DT, fall back to hardcoded address */
+		res = (struct resource)DEFINE_RES_MEM(ICRAM1,
+						      shmobile_boot_size);
+		goto map;
+	}
+
+	error = of_address_to_resource(np, 0, &res);
+	if (error) {
+		pr_err("Failed to get smp-sram address: %d\n", error);
+		return;
+	}
+
+map:
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
-	p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
+	if (res.start & (256 * 1024 - 1) ||
+	    resource_size(&res) < shmobile_boot_size) {
+		pr_err("Invalid smp-sram region\n");
+		return;
+	}
+
+	p = ioremap(res.start, resource_size(&res));
+	if (!p)
+		return;
+
 	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
 	iounmap(p);
 
 	/* setup reset vectors */
 	p = ioremap_nocache(RST, 0x63);
-	bar = phys_to_sbar(boot_vector_addr);
+	bar = phys_to_sbar(res.start);
 	if (has_a15) {
 		writel_relaxed(bar, p + CA15BAR);
 		writel_relaxed(bar | SBAR_BAREN, p + CA15BAR);
-- 
2.7.4

[PATCH 2/9] ARM: shmobile: rcar-gen2: Obtain jump stub region from DT

[Geert Uytterhoeven]

Add support for obtaining from DT the SRAM region to store the jump stub
for CPU core bringup, according to the renesas,smp-sram DT bindings.

If no region is specified in DT, the code falls back to hardcoded ICRAM1
as before, to maintain backwards compatibility.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/mach-shmobile/pm-rcar-gen2.c | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 0178da7ace82dcbd..e5f215c8b218100a 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -11,7 +11,9 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/ioport.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
@@ -69,8 +71,9 @@ void __init rcar_gen2_pm_init(void)
 	struct device_node *np, *cpus;
 	bool has_a7 = false;
 	bool has_a15 = false;
-	phys_addr_t boot_vector_addr = ICRAM1;
+	struct resource res;
 	u32 syscier = 0;
+	int error;
 
 	if (once++)
 		return;
@@ -91,14 +94,38 @@ void __init rcar_gen2_pm_init(void)
 	else if (of_machine_is_compatible("renesas,r8a7791"))
 		syscier = 0x00111003;
 
+	np = of_find_compatible_node(NULL, NULL, "renesas,smp-sram");
+	if (!np) {
+		/* No smp-sram in DT, fall back to hardcoded address */
+		res = (struct resource)DEFINE_RES_MEM(ICRAM1,
+						      shmobile_boot_size);
+		goto map;
+	}
+
+	error = of_address_to_resource(np, 0, &res);
+	if (error) {
+		pr_err("Failed to get smp-sram address: %d\n", error);
+		return;
+	}
+
+map:
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
-	p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
+	if (res.start & (256 * 1024 - 1) ||
+	    resource_size(&res) < shmobile_boot_size) {
+		pr_err("Invalid smp-sram region\n");
+		return;
+	}
+
+	p = ioremap(res.start, resource_size(&res));
+	if (!p)
+		return;
+
 	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
 	iounmap(p);
 
 	/* setup reset vectors */
 	p = ioremap_nocache(RST, 0x63);
-	bar = phys_to_sbar(boot_vector_addr);
+	bar = phys_to_sbar(res.start);
 	if (has_a15) {
 		writel_relaxed(bar, p + CA15BAR);
 		writel_relaxed(bar | SBAR_BAREN, p + CA15BAR);
-- 
2.7.4

[PATCH 3/9] ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7743.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index b8ce935f6fb196fe..4d59e498fb45fe15 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -481,6 +481,14 @@
 		icram1:	sram@e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		ether: ethernet@ee700000 {
-- 
2.7.4

[PATCH 3/9] ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7743.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index b8ce935f6fb196fe..4d59e498fb45fe15 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -481,6 +481,14 @@
 		icram1:	sram at e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram at 0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		ether: ethernet at ee700000 {
-- 
2.7.4

[PATCH 4/9] ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
 arch/arm/boot/dts/r8a7745.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 88cf92bcd2f9b4fc..354534cdc5889cbc 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -481,6 +481,14 @@
 		icram1:	sram@e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		ether: ethernet@ee700000 {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 4/9] ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7745.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 88cf92bcd2f9b4fc..354534cdc5889cbc 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -481,6 +481,14 @@
 		icram1:	sram@e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		ether: ethernet@ee700000 {
-- 
2.7.4

[PATCH 4/9] ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7745.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 88cf92bcd2f9b4fc..354534cdc5889cbc 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -481,6 +481,14 @@
 		icram1:	sram at e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram at 0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		ether: ethernet at ee700000 {
-- 
2.7.4

[PATCH 5/9] ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
 arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4ee34995573cf505..ff986df23b62135f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -838,6 +838,14 @@
 	icram1:	sram@e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram@0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet@ee700000 {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/9] ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4ee34995573cf505..ff986df23b62135f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -838,6 +838,14 @@
 	icram1:	sram@e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram@0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet@ee700000 {
-- 
2.7.4

[PATCH 5/9] ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4ee34995573cf505..ff986df23b62135f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -838,6 +838,14 @@
 	icram1:	sram at e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram at 0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet at ee700000 {
-- 
2.7.4

[PATCH 6/9] ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7791.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index f4748a9cb0375e4d..e135da440eed7b94 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -898,6 +898,14 @@
 	icram1:	sram@e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram@0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet@ee700000 {
-- 
2.7.4

[PATCH 6/9] ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7791.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index f4748a9cb0375e4d..e135da440eed7b94 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -898,6 +898,14 @@
 	icram1:	sram at e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram at 0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet at ee700000 {
-- 
2.7.4

[PATCH 7/9] ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
 arch/arm/boot/dts/r8a7792.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 136a86ac64974adb..2623f39bed2b73bb 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -473,6 +473,14 @@
 		icram1:	sram@e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		sdhi0: sd@ee100000 {
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 7/9] ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7792.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 136a86ac64974adb..2623f39bed2b73bb 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -473,6 +473,14 @@
 		icram1:	sram@e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		sdhi0: sd@ee100000 {
-- 
2.7.4

[PATCH 7/9] ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7792.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 136a86ac64974adb..2623f39bed2b73bb 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -473,6 +473,14 @@
 		icram1:	sram at e63c0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram at 0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x10>;
+			};
 		};
 
 		sdhi0: sd at ee100000 {
-- 
2.7.4

[PATCH 8/9] ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7793.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index bc6a44272f555215..497716b6fbe24164 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -856,6 +856,14 @@
 	icram1:	sram@e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram@0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet@ee700000 {
-- 
2.7.4

[PATCH 8/9] ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7793.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index bc6a44272f555215..497716b6fbe24164 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -856,6 +856,14 @@
 	icram1:	sram at e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram at 0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet at ee700000 {
-- 
2.7.4

[PATCH 9/9] ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7794.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 78973cee7185ffe6..f32b458e93285adc 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -596,6 +596,14 @@
 	icram1:	sram@e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram@0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet@ee700000 {
-- 
2.7.4

[PATCH 9/9] ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub

[Geert Uytterhoeven]

Reserve SRAM for the jump stub for CPU core bringup.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7794.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 78973cee7185ffe6..f32b458e93285adc 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -596,6 +596,14 @@
 	icram1:	sram at e63c0000 {
 		compatible = "mmio-sram";
 		reg = <0 0xe63c0000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xe63c0000 0x1000>;
+
+		smp-sram at 0 {
+			compatible = "renesas,smp-sram";
+			reg = <0 0x10>;
+		};
 	};
 
 	ether: ethernet at ee700000 {
-- 
2.7.4

Re: [PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
> stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
> ICRAM1.
>
> This patch series adds support to specify this region from DT.  It
> consists of 3 parts:
>   - DT binding documentation for reserving SRAM for the jump stub,
>   - A platform code update to retrieve the information from DT, if
>     present (of course backwards-compatibility with old DTBs is
>     preserved),
>   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
>     RZ/G1 SoCs.
>
> The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
> Add Inter Connect RAM".
>
> Note that the current jump stub in Linux is 12 bytes long.  The patches
> reserve 16 bytes of SRAM.  Should this be increased?  The mapping
> granularity is PAGE_SIZE anyway.
>
> Thanks for your comments!
>
> Geert Uytterhoeven (9):
>   dt-bindings: sram: Document renesas,smp-sram
>   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
>   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub

Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
unrelated fix to enable SMP).

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:
> The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
> stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
> ICRAM1.
>
> This patch series adds support to specify this region from DT.  It
> consists of 3 parts:
>   - DT binding documentation for reserving SRAM for the jump stub,
>   - A platform code update to retrieve the information from DT, if
>     present (of course backwards-compatibility with old DTBs is
>     preserved),
>   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
>     RZ/G1 SoCs.
>
> The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
> Add Inter Connect RAM".
>
> Note that the current jump stub in Linux is 12 bytes long.  The patches
> reserve 16 bytes of SRAM.  Should this be increased?  The mapping
> granularity is PAGE_SIZE anyway.
>
> Thanks for your comments!
>
> Geert Uytterhoeven (9):
>   dt-bindings: sram: Document renesas,smp-sram
>   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
>   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
>   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub

Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
unrelated fix to enable SMP).

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 1/9] dt-bindings: sram: Document renesas,smp-sram

[Rob Herring]

On Tue, Jul 04, 2017 at 05:41:35PM +0200, Geert Uytterhoeven wrote:
> Document reserved SRAM for the SMP jump stub on Renesas R-Car Gen2 and
> RZ/G1 SoCs.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  .../devicetree/bindings/sram/renesas,smp-sram.txt  | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 1/9] dt-bindings: sram: Document renesas,smp-sram

[Rob Herring]

On Tue, Jul 04, 2017 at 05:41:35PM +0200, Geert Uytterhoeven wrote:
> Document reserved SRAM for the SMP jump stub on Renesas R-Car Gen2 and
> RZ/G1 SoCs.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  .../devicetree/bindings/sram/renesas,smp-sram.txt  | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sram/renesas,smp-sram.txt

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Simon Horman]

On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
> <geert+renesas@glider.be> wrote:
> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
> > ICRAM1.
> >
> > This patch series adds support to specify this region from DT.  It
> > consists of 3 parts:
> >   - DT binding documentation for reserving SRAM for the jump stub,
> >   - A platform code update to retrieve the information from DT, if
> >     present (of course backwards-compatibility with old DTBs is
> >     preserved),
> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
> >     RZ/G1 SoCs.
> >
> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
> > Add Inter Connect RAM".
> >
> > Note that the current jump stub in Linux is 12 bytes long.  The patches
> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
> > granularity is PAGE_SIZE anyway.
> >
> > Thanks for your comments!
> >
> > Geert Uytterhoeven (9):
> >   dt-bindings: sram: Document renesas,smp-sram
> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
> 
> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
> unrelated fix to enable SMP).

Geert, these seem nice and clean to me.
Are they ready to be applied?

[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Simon Horman]

On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
> <geert+renesas@glider.be> wrote:
> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
> > ICRAM1.
> >
> > This patch series adds support to specify this region from DT.  It
> > consists of 3 parts:
> >   - DT binding documentation for reserving SRAM for the jump stub,
> >   - A platform code update to retrieve the information from DT, if
> >     present (of course backwards-compatibility with old DTBs is
> >     preserved),
> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
> >     RZ/G1 SoCs.
> >
> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
> > Add Inter Connect RAM".
> >
> > Note that the current jump stub in Linux is 12 bytes long.  The patches
> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
> > granularity is PAGE_SIZE anyway.
> >
> > Thanks for your comments!
> >
> > Geert Uytterhoeven (9):
> >   dt-bindings: sram: Document renesas,smp-sram
> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
> 
> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
> unrelated fix to enable SMP).

Geert, these seem nice and clean to me.
Are they ready to be applied?

Re: [PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

Hi Simon,

On Mon, Jul 10, 2017 at 10:39 AM, Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> wrote:
> On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
>> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
>> <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org> wrote:
>> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
>> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
>> > ICRAM1.
>> >
>> > This patch series adds support to specify this region from DT.  It
>> > consists of 3 parts:
>> >   - DT binding documentation for reserving SRAM for the jump stub,
>> >   - A platform code update to retrieve the information from DT, if
>> >     present (of course backwards-compatibility with old DTBs is
>> >     preserved),
>> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
>> >     RZ/G1 SoCs.
>> >
>> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
>> > Add Inter Connect RAM".
>> >
>> > Note that the current jump stub in Linux is 12 bytes long.  The patches
>> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
>> > granularity is PAGE_SIZE anyway.
>> >
>> > Thanks for your comments!
>> >
>> > Geert Uytterhoeven (9):
>> >   dt-bindings: sram: Document renesas,smp-sram
>> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
>> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
>>
>> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
>> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
>> unrelated fix to enable SMP).
>
> Geert, these seem nice and clean to me.
> Are they ready to be applied?

Now the binding has been Acked by Rob, I think they are.
Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

Hi Simon,

On Mon, Jul 10, 2017 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
>> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
>> <geert+renesas@glider.be> wrote:
>> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
>> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
>> > ICRAM1.
>> >
>> > This patch series adds support to specify this region from DT.  It
>> > consists of 3 parts:
>> >   - DT binding documentation for reserving SRAM for the jump stub,
>> >   - A platform code update to retrieve the information from DT, if
>> >     present (of course backwards-compatibility with old DTBs is
>> >     preserved),
>> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
>> >     RZ/G1 SoCs.
>> >
>> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
>> > Add Inter Connect RAM".
>> >
>> > Note that the current jump stub in Linux is 12 bytes long.  The patches
>> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
>> > granularity is PAGE_SIZE anyway.
>> >
>> > Thanks for your comments!
>> >
>> > Geert Uytterhoeven (9):
>> >   dt-bindings: sram: Document renesas,smp-sram
>> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
>> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
>>
>> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
>> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
>> unrelated fix to enable SMP).
>
> Geert, these seem nice and clean to me.
> Are they ready to be applied?

Now the binding has been Acked by Rob, I think they are.
Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Geert Uytterhoeven]

Hi Simon,

On Mon, Jul 10, 2017 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
>> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
>> <geert+renesas@glider.be> wrote:
>> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
>> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
>> > ICRAM1.
>> >
>> > This patch series adds support to specify this region from DT.  It
>> > consists of 3 parts:
>> >   - DT binding documentation for reserving SRAM for the jump stub,
>> >   - A platform code update to retrieve the information from DT, if
>> >     present (of course backwards-compatibility with old DTBs is
>> >     preserved),
>> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
>> >     RZ/G1 SoCs.
>> >
>> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
>> > Add Inter Connect RAM".
>> >
>> > Note that the current jump stub in Linux is 12 bytes long.  The patches
>> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
>> > granularity is PAGE_SIZE anyway.
>> >
>> > Thanks for your comments!
>> >
>> > Geert Uytterhoeven (9):
>> >   dt-bindings: sram: Document renesas,smp-sram
>> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
>> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
>> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
>>
>> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
>> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
>> unrelated fix to enable SMP).
>
> Geert, these seem nice and clean to me.
> Are they ready to be applied?

Now the binding has been Acked by Rob, I think they are.
Thanks!

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Simon Horman]

On Mon, Jul 10, 2017 at 10:44:47AM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
> 
> On Mon, Jul 10, 2017 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
> >> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
> >> <geert+renesas@glider.be> wrote:
> >> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
> >> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
> >> > ICRAM1.
> >> >
> >> > This patch series adds support to specify this region from DT.  It
> >> > consists of 3 parts:
> >> >   - DT binding documentation for reserving SRAM for the jump stub,
> >> >   - A platform code update to retrieve the information from DT, if
> >> >     present (of course backwards-compatibility with old DTBs is
> >> >     preserved),
> >> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
> >> >     RZ/G1 SoCs.
> >> >
> >> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
> >> > Add Inter Connect RAM".
> >> >
> >> > Note that the current jump stub in Linux is 12 bytes long.  The patches
> >> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
> >> > granularity is PAGE_SIZE anyway.
> >> >
> >> > Thanks for your comments!
> >> >
> >> > Geert Uytterhoeven (9):
> >> >   dt-bindings: sram: Document renesas,smp-sram
> >> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
> >> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
> >>
> >> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
> >> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
> >> unrelated fix to enable SMP).
> >
> > Geert, these seem nice and clean to me.
> > Are they ready to be applied?
> 
> Now the binding has been Acked by Rob, I think they are.
> Thanks!

Thanks, all patches accepted for v4.14.

Re: [PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Simon Horman]

On Mon, Jul 10, 2017 at 10:44:47AM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
> 
> On Mon, Jul 10, 2017 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
> >> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
> >> <geert+renesas@glider.be> wrote:
> >> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
> >> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
> >> > ICRAM1.
> >> >
> >> > This patch series adds support to specify this region from DT.  It
> >> > consists of 3 parts:
> >> >   - DT binding documentation for reserving SRAM for the jump stub,
> >> >   - A platform code update to retrieve the information from DT, if
> >> >     present (of course backwards-compatibility with old DTBs is
> >> >     preserved),
> >> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
> >> >     RZ/G1 SoCs.
> >> >
> >> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
> >> > Add Inter Connect RAM".
> >> >
> >> > Note that the current jump stub in Linux is 12 bytes long.  The patches
> >> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
> >> > granularity is PAGE_SIZE anyway.
> >> >
> >> > Thanks for your comments!
> >> >
> >> > Geert Uytterhoeven (9):
> >> >   dt-bindings: sram: Document renesas,smp-sram
> >> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
> >> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
> >>
> >> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
> >> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
> >> unrelated fix to enable SMP).
> >
> > Geert, these seem nice and clean to me.
> > Are they ready to be applied?
> 
> Now the binding has been Acked by Rob, I think they are.
> Thanks!

Thanks, all patches accepted for v4.14.

[PATCH 0/9] ARM: renesas: Use SMP jump stub SRAM region from DT

[Simon Horman]

On Mon, Jul 10, 2017 at 10:44:47AM +0200, Geert Uytterhoeven wrote:
> Hi Simon,
> 
> On Mon, Jul 10, 2017 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Jul 04, 2017 at 06:44:48PM +0200, Geert Uytterhoeven wrote:
> >> On Tue, Jul 4, 2017 at 5:41 PM, Geert Uytterhoeven
> >> <geert+renesas@glider.be> wrote:
> >> > The R-Car Gen2 platform code for CPU core bringup needs to copy a jump
> >> > stub to on-SoC SRAM.  Currently it uses a hardcoded address pointing to
> >> > ICRAM1.
> >> >
> >> > This patch series adds support to specify this region from DT.  It
> >> > consists of 3 parts:
> >> >   - DT binding documentation for reserving SRAM for the jump stub,
> >> >   - A platform code update to retrieve the information from DT, if
> >> >     present (of course backwards-compatibility with old DTBs is
> >> >     preserved),
> >> >   - DT updates to reserve an SRAM region in DT on all R-Car Gen2 and
> >> >     RZ/G1 SoCs.
> >> >
> >> > The DT patches in this series depend on "[PATCH 0/7] ARM: dts: renesas:
> >> > Add Inter Connect RAM".
> >> >
> >> > Note that the current jump stub in Linux is 12 bytes long.  The patches
> >> > reserve 16 bytes of SRAM.  Should this be increased?  The mapping
> >> > granularity is PAGE_SIZE anyway.
> >> >
> >> > Thanks for your comments!
> >> >
> >> > Geert Uytterhoeven (9):
> >> >   dt-bindings: sram: Document renesas,smp-sram
> >> >   ARM: shmobile: rcar-gen2: Obtain jump stub region from DT
> >> >   ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub
> >> >   ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub
> >>
> >> Forgot to mention: this has been tested on r8a7790/lager, r8a7791/koelsch,
> >> r8a7792/blanche, r8a7793/gose, and r8a7794/alt (r8a7794 needs an
> >> unrelated fix to enable SMP).
> >
> > Geert, these seem nice and clean to me.
> > Are they ready to be applied?
> 
> Now the binding has been Acked by Rob, I think they are.
> Thanks!

Thanks, all patches accepted for v4.14.