* [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
@ 2017-07-10 6:12 ` Ludovic Desroches
0 siblings, 0 replies; 15+ messages in thread
From: Ludovic Desroches @ 2017-07-10 6:12 UTC (permalink / raw)
To: linux-arm-kernel
Use pin macros instead of magic numbers to ease interpretation.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
---
I have remove the unexpected brace removal from the first version of this patch.
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 2e2c3d1a1fa2..6eec8dc5143e 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -68,7 +68,7 @@
ahb {
usb0: gadget at 00300000 {
- atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@@ -76,8 +76,8 @@
usb1: ohci at 00400000 {
num-ports = <3>;
- atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
- &pioA 42 GPIO_ACTIVE_HIGH
+ atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+ &pioA PIN_PB10 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
@@ -127,7 +127,7 @@
ethernet-phy at 1 {
reg = <0x1>;
interrupt-parent = <&pioA>;
- interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -160,9 +160,9 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
@@ -504,7 +504,7 @@
bp1 {
label = "PB_USER";
- gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
};
};
@@ -517,17 +517,18 @@
red {
label = "red";
- gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
};
+
green {
label = "green";
- gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
};
blue {
label = "blue";
- gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
--
2.12.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
@ 2017-07-10 6:12 ` Ludovic Desroches
0 siblings, 0 replies; 15+ messages in thread
From: Ludovic Desroches @ 2017-07-10 6:12 UTC (permalink / raw)
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: nicolas.ferre-UWL1GkI3JZL3oGB3hsPCZA,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8,
Ludovic Desroches
Use pin macros instead of magic numbers to ease interpretation.
Signed-off-by: Ludovic Desroches <ludovic.desroches-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
---
I have remove the unexpected brace removal from the first version of this patch.
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 2e2c3d1a1fa2..6eec8dc5143e 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -68,7 +68,7 @@
ahb {
usb0: gadget@00300000 {
- atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@@ -76,8 +76,8 @@
usb1: ohci@00400000 {
num-ports = <3>;
- atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
- &pioA 42 GPIO_ACTIVE_HIGH
+ atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+ &pioA PIN_PB10 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
@@ -127,7 +127,7 @@
ethernet-phy@1 {
reg = <0x1>;
interrupt-parent = <&pioA>;
- interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -160,9 +160,9 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
active-semi,input-voltage-threshold-microvolt = <6600>;
active-semi,precondition-timeout = <40>;
active-semi,total-timeout = <3>;
@@ -504,7 +504,7 @@
bp1 {
label = "PB_USER";
- gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
};
};
@@ -517,17 +517,18 @@
red {
label = "red";
- gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
};
+
green {
label = "green";
- gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
};
blue {
label = "blue";
- gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
--
2.12.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
2017-07-10 6:12 ` Ludovic Desroches
(?)
@ 2017-07-13 11:56 ` Nicolas Ferre
-1 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2017-07-13 11:56 UTC (permalink / raw)
To: Ludovic Desroches, linux-arm-kernel, devicetree, linux-kernel,
alexandre.belloni
Cc: boris.brezillon
On 10/07/2017 at 08:12, Ludovic Desroches wrote:
> Use pin macros instead of magic numbers to ease interpretation.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
>
> I have remove the unexpected brace removal from the first version of this patch.
>
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index 2e2c3d1a1fa2..6eec8dc5143e 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -68,7 +68,7 @@
>
> ahb {
> usb0: gadget@00300000 {
> - atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
> + atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usba_vbus>;
> status = "okay";
> @@ -76,8 +76,8 @@
>
> usb1: ohci@00400000 {
> num-ports = <3>;
> - atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
> - &pioA 42 GPIO_ACTIVE_HIGH
> + atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
> + &pioA PIN_PB10 GPIO_ACTIVE_HIGH
> 0
> >;
> pinctrl-names = "default";
> @@ -127,7 +127,7 @@
> ethernet-phy@1 {
> reg = <0x1>;
> interrupt-parent = <&pioA>;
> - interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> @@ -160,9 +160,9 @@
> compatible = "active-semi,act8945a";
> reg = <0x5b>;
> active-semi,vsel-high;
> - active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
> - active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
> - active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
> + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
> + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
> + active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
> active-semi,input-voltage-threshold-microvolt = <6600>;
> active-semi,precondition-timeout = <40>;
> active-semi,total-timeout = <3>;
> @@ -504,7 +504,7 @@
>
> bp1 {
> label = "PB_USER";
> - gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
> linux,code = <0x104>;
> };
> };
> @@ -517,17 +517,18 @@
>
> red {
> label = "red";
> - gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
> };
>
> +
> green {
> label = "green";
> - gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
> };
>
> blue {
> label = "blue";
> - gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> };
> };
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
@ 2017-07-13 11:56 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2017-07-13 11:56 UTC (permalink / raw)
To: linux-arm-kernel
On 10/07/2017 at 08:12, Ludovic Desroches wrote:
> Use pin macros instead of magic numbers to ease interpretation.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
>
> I have remove the unexpected brace removal from the first version of this patch.
>
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index 2e2c3d1a1fa2..6eec8dc5143e 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -68,7 +68,7 @@
>
> ahb {
> usb0: gadget at 00300000 {
> - atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
> + atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usba_vbus>;
> status = "okay";
> @@ -76,8 +76,8 @@
>
> usb1: ohci at 00400000 {
> num-ports = <3>;
> - atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
> - &pioA 42 GPIO_ACTIVE_HIGH
> + atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
> + &pioA PIN_PB10 GPIO_ACTIVE_HIGH
> 0
> >;
> pinctrl-names = "default";
> @@ -127,7 +127,7 @@
> ethernet-phy at 1 {
> reg = <0x1>;
> interrupt-parent = <&pioA>;
> - interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> @@ -160,9 +160,9 @@
> compatible = "active-semi,act8945a";
> reg = <0x5b>;
> active-semi,vsel-high;
> - active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
> - active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
> - active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
> + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
> + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
> + active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
> active-semi,input-voltage-threshold-microvolt = <6600>;
> active-semi,precondition-timeout = <40>;
> active-semi,total-timeout = <3>;
> @@ -504,7 +504,7 @@
>
> bp1 {
> label = "PB_USER";
> - gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
> linux,code = <0x104>;
> };
> };
> @@ -517,17 +517,18 @@
>
> red {
> label = "red";
> - gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
> };
>
> +
> green {
> label = "green";
> - gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
> };
>
> blue {
> label = "blue";
> - gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> };
> };
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
@ 2017-07-13 11:56 ` Nicolas Ferre
0 siblings, 0 replies; 15+ messages in thread
From: Nicolas Ferre @ 2017-07-13 11:56 UTC (permalink / raw)
To: Ludovic Desroches, linux-arm-kernel, devicetree, linux-kernel,
alexandre.belloni
Cc: boris.brezillon
On 10/07/2017 at 08:12, Ludovic Desroches wrote:
> Use pin macros instead of magic numbers to ease interpretation.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
>
> I have remove the unexpected brace removal from the first version of this patch.
>
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index 2e2c3d1a1fa2..6eec8dc5143e 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -68,7 +68,7 @@
>
> ahb {
> usb0: gadget@00300000 {
> - atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
> + atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usba_vbus>;
> status = "okay";
> @@ -76,8 +76,8 @@
>
> usb1: ohci@00400000 {
> num-ports = <3>;
> - atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
> - &pioA 42 GPIO_ACTIVE_HIGH
> + atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
> + &pioA PIN_PB10 GPIO_ACTIVE_HIGH
> 0
> >;
> pinctrl-names = "default";
> @@ -127,7 +127,7 @@
> ethernet-phy@1 {
> reg = <0x1>;
> interrupt-parent = <&pioA>;
> - interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
> + interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
> @@ -160,9 +160,9 @@
> compatible = "active-semi,act8945a";
> reg = <0x5b>;
> active-semi,vsel-high;
> - active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
> - active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
> - active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
> + active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
> + active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
> + active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
> active-semi,input-voltage-threshold-microvolt = <6600>;
> active-semi,precondition-timeout = <40>;
> active-semi,total-timeout = <3>;
> @@ -504,7 +504,7 @@
>
> bp1 {
> label = "PB_USER";
> - gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
> linux,code = <0x104>;
> };
> };
> @@ -517,17 +517,18 @@
>
> red {
> label = "red";
> - gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
> };
>
> +
> green {
> label = "green";
> - gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
> };
>
> blue {
> label = "blue";
> - gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
> + gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> };
> };
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
@ 2017-07-17 9:15 ` Alexandre Belloni
0 siblings, 0 replies; 15+ messages in thread
From: Alexandre Belloni @ 2017-07-17 9:15 UTC (permalink / raw)
To: Ludovic Desroches
Cc: linux-arm-kernel, devicetree, linux-kernel, nicolas.ferre,
boris.brezillon
On 10/07/2017 at 08:12:05 +0200, Ludovic Desroches wrote:
> Use pin macros instead of magic numbers to ease interpretation.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> ---
>
> I have remove the unexpected brace removal from the first version of this patch.
>
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
Applied, thanks.
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
@ 2017-07-17 9:15 ` Alexandre Belloni
0 siblings, 0 replies; 15+ messages in thread
From: Alexandre Belloni @ 2017-07-17 9:15 UTC (permalink / raw)
To: linux-arm-kernel
On 10/07/2017 at 08:12:05 +0200, Ludovic Desroches wrote:
> Use pin macros instead of magic numbers to ease interpretation.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> ---
>
> I have remove the unexpected brace removal from the first version of this patch.
>
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
Applied, thanks.
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers
@ 2017-07-17 9:15 ` Alexandre Belloni
0 siblings, 0 replies; 15+ messages in thread
From: Alexandre Belloni @ 2017-07-17 9:15 UTC (permalink / raw)
To: Ludovic Desroches
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
nicolas.ferre-UWL1GkI3JZL3oGB3hsPCZA,
boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8
On 10/07/2017 at 08:12:05 +0200, Ludovic Desroches wrote:
> Use pin macros instead of magic numbers to ease interpretation.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
> ---
>
> I have remove the unexpected brace removal from the first version of this patch.
>
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
Applied, thanks.
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 15+ messages in thread