* [PATCH v8 0/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 support
@ 2017-07-17 17:03 ` Niklas Söderlund
0 siblings, 0 replies; 9+ messages in thread
From: Niklas Söderlund @ 2017-07-17 17:03 UTC (permalink / raw)
To: Laurent Pinchart, Hans Verkuil,
linux-media-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
tomoharu.fukawa.eb-zM6kxYcvzFBBDgjK7y7TUQ, Kieran Bingham,
Sakari Ailus, Niklas Söderlund
Hi,
This is the latest incarnation of R-Car MIPI CSI-2 receiver driver. It's
based on top of the media-tree and are tested on Renesas Salvator-X together
with the out of tree patches for rcar-vin to add support for Gen3 VIN
and a driver for ADV7482. If anyone is interested to test
video grabbing using these out of tree patches please see [1].
It depends on the patches:
- [PATCH v4 0/3] v4l2-async: add subnotifier registration for subdevices
Changes since v7:
- Rebase on top of the latest incremental async patches.
- Fix comments on DT documentation.
- Use v4l2_ctrl_g_ctrl_int64() instead of v4l2_g_ext_ctrls().
- Handle try formats in .set_fmt() and .get_fmt().
- Don't call v4l2_device_register_subdev_nodes() as this is not needed
with the complete() callbacks synchronized.
- Fix line over 80 chars.
- Fix varies spelling mistakes.
Changes since v6:
- Rebased on top of Sakaris fwnode patches.
- Changed of RCAR_CSI2_PAD_MAX to NR_OF_RCAR_CSI2_PAD.
- Remove assumtion about unkown medis bus type, thanks Sakari for
pointing this out.
- Created table for supported format information instead of scattering
this information around the driver, thanks Sakari!
- Small newline fixes and reduce some indentation levels.
Changes since v5:
- Make use of the incremental async subnotifer and helper to map DT
endpoint to media pad number. This moves functionality which
previously in the Gen3 patches for R-Car VIN driver to this R-Car
CSI-2 driver. This is done in preparation to support the ADV7482
driver in development by Kieran which will register more then one
subdevice and the CSI-2 driver needs to cope wit this. Further more it
prepares the driver for another use-case where more then one subdevice
is present upstream for the CSI-2.
- Small cleanups.
- Add explicit include for linux/io.h, thanks Kieran.
Changes since v4:
- Match SoC part numbers and drop trailing space in documentation,
thanks Geert for pointing this out.
- Clarify that the driver is a CSI-2 receiver by supervised
s/interface/receiver/, thanks Laurent.
- Add entries in Kconfig and Makefile alphabetically instead of append.
- Rename struct rcar_csi2 member swap to lane_swap.
- Remove macros to wrap calls to dev_{dbg,info,warn,err}.
- Add wrappers for ioread32 and iowrite32.
- Remove unused interrupt handler, but keep checking in probe that there
are a interrupt define in DT.
- Rework how to wait for LP-11 state, thanks Laurent for the great idea!
- Remove unneeded delay in rcar_csi2_reset()
- Remove check for duplicated lane id:s from DT parsing. Broken out to a
separate patch adding this check directly to v4l2_of_parse_endpoint().
- Fixed rcar_csi2_start() to ask it's source subdevice for information
about pixel rate and frame format. With this change having
{set,get}_fmt operations became redundant, it was only used for
figuring out this out so dropped them.
- Tabulated frequency settings map.
- Dropped V4L2_SUBDEV_FL_HAS_DEVNODE it should never have been set.
- Switched from MEDIA_ENT_F_ATV_DECODER to
MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as entity function. I can't
find a more suitable function, and what the hardware do is to fetch
video from an external chip and passes it on to a another SoC internal
IP it's sort of a formatter.
- Break out DT documentation and code in two patches.
Changes since v3:
- Update DT binding documentation with input from Geert Uytterhoeven,
thanks!
Changes since v2:
- Added media control pads as this is needed by the new rcar-vin driver.
- Update DT bindings after review comments and to add r8a7796 support.
- Add get_fmt handler.
- Fix media bus format error s/YUYV8/UYVY8/
Changes since v1:
- Drop dependency on a pad aware s_stream operation.
- Use the DT bindings format "renesas,<soctype>-<device>", thanks Geert
for pointing this out.
1. http://elinux.org/R-Car/Tests:rcar-vin
Niklas Söderlund (2):
media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
.../devicetree/bindings/media/rcar-csi2.txt | 118 +++
drivers/media/platform/rcar-vin/Kconfig | 12 +
drivers/media/platform/rcar-vin/Makefile | 1 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 822 +++++++++++++++++++++
4 files changed, 953 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c
--
2.13.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v8 0/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 support
@ 2017-07-17 17:03 ` Niklas Söderlund
0 siblings, 0 replies; 9+ messages in thread
From: Niklas Söderlund @ 2017-07-17 17:03 UTC (permalink / raw)
To: Laurent Pinchart, Hans Verkuil, linux-media, Rob Herring, devicetree
Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
Sakari Ailus, Niklas Söderlund
Hi,
This is the latest incarnation of R-Car MIPI CSI-2 receiver driver. It's
based on top of the media-tree and are tested on Renesas Salvator-X together
with the out of tree patches for rcar-vin to add support for Gen3 VIN
and a driver for ADV7482. If anyone is interested to test
video grabbing using these out of tree patches please see [1].
It depends on the patches:
- [PATCH v4 0/3] v4l2-async: add subnotifier registration for subdevices
Changes since v7:
- Rebase on top of the latest incremental async patches.
- Fix comments on DT documentation.
- Use v4l2_ctrl_g_ctrl_int64() instead of v4l2_g_ext_ctrls().
- Handle try formats in .set_fmt() and .get_fmt().
- Don't call v4l2_device_register_subdev_nodes() as this is not needed
with the complete() callbacks synchronized.
- Fix line over 80 chars.
- Fix varies spelling mistakes.
Changes since v6:
- Rebased on top of Sakaris fwnode patches.
- Changed of RCAR_CSI2_PAD_MAX to NR_OF_RCAR_CSI2_PAD.
- Remove assumtion about unkown medis bus type, thanks Sakari for
pointing this out.
- Created table for supported format information instead of scattering
this information around the driver, thanks Sakari!
- Small newline fixes and reduce some indentation levels.
Changes since v5:
- Make use of the incremental async subnotifer and helper to map DT
endpoint to media pad number. This moves functionality which
previously in the Gen3 patches for R-Car VIN driver to this R-Car
CSI-2 driver. This is done in preparation to support the ADV7482
driver in development by Kieran which will register more then one
subdevice and the CSI-2 driver needs to cope wit this. Further more it
prepares the driver for another use-case where more then one subdevice
is present upstream for the CSI-2.
- Small cleanups.
- Add explicit include for linux/io.h, thanks Kieran.
Changes since v4:
- Match SoC part numbers and drop trailing space in documentation,
thanks Geert for pointing this out.
- Clarify that the driver is a CSI-2 receiver by supervised
s/interface/receiver/, thanks Laurent.
- Add entries in Kconfig and Makefile alphabetically instead of append.
- Rename struct rcar_csi2 member swap to lane_swap.
- Remove macros to wrap calls to dev_{dbg,info,warn,err}.
- Add wrappers for ioread32 and iowrite32.
- Remove unused interrupt handler, but keep checking in probe that there
are a interrupt define in DT.
- Rework how to wait for LP-11 state, thanks Laurent for the great idea!
- Remove unneeded delay in rcar_csi2_reset()
- Remove check for duplicated lane id:s from DT parsing. Broken out to a
separate patch adding this check directly to v4l2_of_parse_endpoint().
- Fixed rcar_csi2_start() to ask it's source subdevice for information
about pixel rate and frame format. With this change having
{set,get}_fmt operations became redundant, it was only used for
figuring out this out so dropped them.
- Tabulated frequency settings map.
- Dropped V4L2_SUBDEV_FL_HAS_DEVNODE it should never have been set.
- Switched from MEDIA_ENT_F_ATV_DECODER to
MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as entity function. I can't
find a more suitable function, and what the hardware do is to fetch
video from an external chip and passes it on to a another SoC internal
IP it's sort of a formatter.
- Break out DT documentation and code in two patches.
Changes since v3:
- Update DT binding documentation with input from Geert Uytterhoeven,
thanks!
Changes since v2:
- Added media control pads as this is needed by the new rcar-vin driver.
- Update DT bindings after review comments and to add r8a7796 support.
- Add get_fmt handler.
- Fix media bus format error s/YUYV8/UYVY8/
Changes since v1:
- Drop dependency on a pad aware s_stream operation.
- Use the DT bindings format "renesas,<soctype>-<device>", thanks Geert
for pointing this out.
1. http://elinux.org/R-Car/Tests:rcar-vin
Niklas Söderlund (2):
media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
.../devicetree/bindings/media/rcar-csi2.txt | 118 +++
drivers/media/platform/rcar-vin/Kconfig | 12 +
drivers/media/platform/rcar-vin/Makefile | 1 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 822 +++++++++++++++++++++
4 files changed, 953 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c
--
2.13.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v8 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
2017-07-17 17:03 ` Niklas Söderlund
@ 2017-07-17 17:03 ` Niklas Söderlund
-1 siblings, 0 replies; 9+ messages in thread
From: Niklas Söderlund @ 2017-07-17 17:03 UTC (permalink / raw)
To: Laurent Pinchart, Hans Verkuil,
linux-media-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
tomoharu.fukawa.eb-zM6kxYcvzFBBDgjK7y7TUQ, Kieran Bingham,
Sakari Ailus, Niklas Söderlund
Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
are located between the video sources (CSI-2 transmitters) and the video
grabbers (VIN) on Gen3 of Renesas R-Car SoC.
Each CSI-2 device is connected to more then one VIN device which
simultaneously can receive video from the same CSI-2 device. Each VIN
device can also be connected to more then one CSI-2 device. The routing
of which link are used are controlled by the VIN devices. There are only
a few possible routes which are set by hardware limitations, which are
different for each SoC in the Gen3 family.
To work with the limitations of routing possibilities it is necessary
for the DT bindings to describe which VIN device is connected to which
CSI-2 device. This is why port 1 needs to to assign reg numbers for each
VIN device that be connected to it. To setup and to know which links are
valid for each SoC is the responsibility of the VIN driver since the
register to configure it belongs to the VIN hardware.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
.../devicetree/bindings/media/rcar-csi2.txt | 118 +++++++++++++++++++++
1 file changed, 118 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
diff --git a/Documentation/devicetree/bindings/media/rcar-csi2.txt b/Documentation/devicetree/bindings/media/rcar-csi2.txt
new file mode 100644
index 0000000000000000..c298a7d821153219
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rcar-csi2.txt
@@ -0,0 +1,118 @@
+Renesas R-Car MIPI CSI-2
+------------------------
+
+The rcar-csi2 device provides MIPI CSI-2 capabilities for the Renesas R-Car
+family of devices. It is to be used in conjunction with the R-Car VIN module,
+which provides the video capture capabilities.
+
+Mandatory properties
+--------------------
+ - compatible: Must be one or more of the following
+ - "renesas,r8a7795-csi2" for the R8A7795 device.
+ - "renesas,r8a7796-csi2" for the R8A7796 device.
+ - "renesas,rcar-gen3-csi2" for a generic R-Car Gen3 compatible device.
+
+ When compatible with a generic version nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
+ - reg: the register base and size for the device registers
+ - interrupts: the interrupt for the device
+ - clocks: Reference to the parent clock
+
+The device node shall contain two 'port' child nodes according to the
+bindings defined in Documentation/devicetree/bindings/media/
+video-interfaces.txt. Port 0 shall connect the node that is the video
+source for to the CSI-2. Port 1 shall connect all the R-Car VIN
+modules, which can make use of the CSI-2 module.
+
+- Port 0 - Video source (Mandatory)
+ - Reg 0 - sub-node describing the endpoint that is the video source
+
+- Port 1 - VIN instances (Mandatory for all VIN present in the SoC)
+ - Reg 0 - sub-node describing the endpoint that is VIN0
+ - Reg 1 - sub-node describing the endpoint that is VIN1
+ - Reg 2 - sub-node describing the endpoint that is VIN2
+ - Reg 3 - sub-node describing the endpoint that is VIN3
+ - Reg 4 - sub-node describing the endpoint that is VIN4
+ - Reg 5 - sub-node describing the endpoint that is VIN5
+ - Reg 6 - sub-node describing the endpoint that is VIN6
+ - Reg 7 - sub-node describing the endpoint that is VIN7
+
+Example:
+
+/* SoC properties */
+
+ csi20: csi2@fea80000 {
+ compatible = "renesas,r8a7796-csi2";
+ reg = <0 0xfea80000 0 0x10000>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi20vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi20>;
+ };
+ csi20vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi20>;
+ };
+ csi20vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi20>;
+ };
+ csi20vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi20>;
+ };
+ csi20vin4: endpoint@4 {
+ reg = <4>;
+ remote-endpoint = <&vin4csi20>;
+ };
+ csi20vin5: endpoint@5 {
+ reg = <5>;
+ remote-endpoint = <&vin5csi20>;
+ };
+ csi20vin6: endpoint@6 {
+ reg = <6>;
+ remote-endpoint = <&vin6csi20>;
+ };
+ csi20vin7: endpoint@7 {
+ reg = <7>;
+ remote-endpoint = <&vin7csi20>;
+ };
+ };
+ };
+ };
+
+/* Board properties */
+
+ &csi20 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ csi20_in: endpoint@0 {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&adv7482_txb>;
+ };
+ };
+ };
+ };
--
2.13.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v8 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
@ 2017-07-17 17:03 ` Niklas Söderlund
0 siblings, 0 replies; 9+ messages in thread
From: Niklas Söderlund @ 2017-07-17 17:03 UTC (permalink / raw)
To: Laurent Pinchart, Hans Verkuil, linux-media, Rob Herring, devicetree
Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
Sakari Ailus, Niklas Söderlund
Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
are located between the video sources (CSI-2 transmitters) and the video
grabbers (VIN) on Gen3 of Renesas R-Car SoC.
Each CSI-2 device is connected to more then one VIN device which
simultaneously can receive video from the same CSI-2 device. Each VIN
device can also be connected to more then one CSI-2 device. The routing
of which link are used are controlled by the VIN devices. There are only
a few possible routes which are set by hardware limitations, which are
different for each SoC in the Gen3 family.
To work with the limitations of routing possibilities it is necessary
for the DT bindings to describe which VIN device is connected to which
CSI-2 device. This is why port 1 needs to to assign reg numbers for each
VIN device that be connected to it. To setup and to know which links are
valid for each SoC is the responsibility of the VIN driver since the
register to configure it belongs to the VIN hardware.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
.../devicetree/bindings/media/rcar-csi2.txt | 118 +++++++++++++++++++++
1 file changed, 118 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
diff --git a/Documentation/devicetree/bindings/media/rcar-csi2.txt b/Documentation/devicetree/bindings/media/rcar-csi2.txt
new file mode 100644
index 0000000000000000..c298a7d821153219
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rcar-csi2.txt
@@ -0,0 +1,118 @@
+Renesas R-Car MIPI CSI-2
+------------------------
+
+The rcar-csi2 device provides MIPI CSI-2 capabilities for the Renesas R-Car
+family of devices. It is to be used in conjunction with the R-Car VIN module,
+which provides the video capture capabilities.
+
+Mandatory properties
+--------------------
+ - compatible: Must be one or more of the following
+ - "renesas,r8a7795-csi2" for the R8A7795 device.
+ - "renesas,r8a7796-csi2" for the R8A7796 device.
+ - "renesas,rcar-gen3-csi2" for a generic R-Car Gen3 compatible device.
+
+ When compatible with a generic version nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
+ - reg: the register base and size for the device registers
+ - interrupts: the interrupt for the device
+ - clocks: Reference to the parent clock
+
+The device node shall contain two 'port' child nodes according to the
+bindings defined in Documentation/devicetree/bindings/media/
+video-interfaces.txt. Port 0 shall connect the node that is the video
+source for to the CSI-2. Port 1 shall connect all the R-Car VIN
+modules, which can make use of the CSI-2 module.
+
+- Port 0 - Video source (Mandatory)
+ - Reg 0 - sub-node describing the endpoint that is the video source
+
+- Port 1 - VIN instances (Mandatory for all VIN present in the SoC)
+ - Reg 0 - sub-node describing the endpoint that is VIN0
+ - Reg 1 - sub-node describing the endpoint that is VIN1
+ - Reg 2 - sub-node describing the endpoint that is VIN2
+ - Reg 3 - sub-node describing the endpoint that is VIN3
+ - Reg 4 - sub-node describing the endpoint that is VIN4
+ - Reg 5 - sub-node describing the endpoint that is VIN5
+ - Reg 6 - sub-node describing the endpoint that is VIN6
+ - Reg 7 - sub-node describing the endpoint that is VIN7
+
+Example:
+
+/* SoC properties */
+
+ csi20: csi2@fea80000 {
+ compatible = "renesas,r8a7796-csi2";
+ reg = <0 0xfea80000 0 0x10000>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi20vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi20>;
+ };
+ csi20vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi20>;
+ };
+ csi20vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi20>;
+ };
+ csi20vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi20>;
+ };
+ csi20vin4: endpoint@4 {
+ reg = <4>;
+ remote-endpoint = <&vin4csi20>;
+ };
+ csi20vin5: endpoint@5 {
+ reg = <5>;
+ remote-endpoint = <&vin5csi20>;
+ };
+ csi20vin6: endpoint@6 {
+ reg = <6>;
+ remote-endpoint = <&vin6csi20>;
+ };
+ csi20vin7: endpoint@7 {
+ reg = <7>;
+ remote-endpoint = <&vin7csi20>;
+ };
+ };
+ };
+ };
+
+/* Board properties */
+
+ &csi20 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ csi20_in: endpoint@0 {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&adv7482_txb>;
+ };
+ };
+ };
+ };
--
2.13.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v8 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
2017-07-17 17:03 ` Niklas Söderlund
@ 2017-07-17 17:03 ` Niklas Söderlund
-1 siblings, 0 replies; 9+ messages in thread
From: Niklas Söderlund @ 2017-07-17 17:03 UTC (permalink / raw)
To: Laurent Pinchart, Hans Verkuil,
linux-media-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
tomoharu.fukawa.eb-zM6kxYcvzFBBDgjK7y7TUQ, Kieran Bingham,
Sakari Ailus, Niklas Söderlund
A V4L2 driver for Renesas R-Car MIPI CSI-2 receiver. The driver
supports the rcar-vin driver on R-Car Gen3 SoCs where separate CSI-2
hardware blocks are connected between the video sources and the video
grabbers (VIN).
Driver is based on a prototype by Koji Matsuoka in the Renesas BSP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
drivers/media/platform/rcar-vin/Kconfig | 12 +
drivers/media/platform/rcar-vin/Makefile | 1 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 822 ++++++++++++++++++++++++++++
3 files changed, 835 insertions(+)
create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c
diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig
index af4c98b44d2e22cb..6875f30c1ae42631 100644
--- a/drivers/media/platform/rcar-vin/Kconfig
+++ b/drivers/media/platform/rcar-vin/Kconfig
@@ -1,3 +1,15 @@
+config VIDEO_RCAR_CSI2
+ tristate "R-Car MIPI CSI-2 Receiver"
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select V4L2_FWNODE
+ ---help---
+ Support for Renesas R-Car MIPI CSI-2 receiver.
+ Supports R-Car Gen3 SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rcar-csi2.
+
config VIDEO_RCAR_VIN
tristate "R-Car Video Input (VIN) Driver"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA && MEDIA_CONTROLLER
diff --git a/drivers/media/platform/rcar-vin/Makefile b/drivers/media/platform/rcar-vin/Makefile
index 48c5632c21dc060b..5ab803d3e7c1aa57 100644
--- a/drivers/media/platform/rcar-vin/Makefile
+++ b/drivers/media/platform/rcar-vin/Makefile
@@ -1,3 +1,4 @@
rcar-vin-objs = rcar-core.o rcar-dma.o rcar-v4l2.o
+obj-$(CONFIG_VIDEO_RCAR_CSI2) += rcar-csi2.o
obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin.o
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
new file mode 100644
index 0000000000000000..09a78dce29725a55
--- /dev/null
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -0,0 +1,822 @@
+/*
+ * Driver for Renesas R-Car MIPI CSI-2 Receiver
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+/* Register offsets and bits */
+
+/* Control Timing Select */
+#define TREF_REG 0x00
+#define TREF_TREF (1 << 0)
+
+/* Software Reset */
+#define SRST_REG 0x04
+#define SRST_SRST (1 << 0)
+
+/* PHY Operation Control */
+#define PHYCNT_REG 0x08
+#define PHYCNT_SHUTDOWNZ (1 << 17)
+#define PHYCNT_RSTZ (1 << 16)
+#define PHYCNT_ENABLECLK (1 << 4)
+#define PHYCNT_ENABLE_3 (1 << 3)
+#define PHYCNT_ENABLE_2 (1 << 2)
+#define PHYCNT_ENABLE_1 (1 << 1)
+#define PHYCNT_ENABLE_0 (1 << 0)
+
+/* Checksum Control */
+#define CHKSUM_REG 0x0c
+#define CHKSUM_ECC_EN (1 << 1)
+#define CHKSUM_CRC_EN (1 << 0)
+
+/*
+ * Channel Data Type Select
+ * VCDT[0-15]: Channel 1 VCDT[16-31]: Channel 2
+ * VCDT2[0-15]: Channel 3 VCDT2[16-31]: Channel 4
+ */
+#define VCDT_REG 0x10
+#define VCDT2_REG 0x14
+#define VCDT_VCDTN_EN (1 << 15)
+#define VCDT_SEL_VC(n) (((n) & 0x3) << 8)
+#define VCDT_SEL_DTN_ON (1 << 6)
+#define VCDT_SEL_DT(n) (((n) & 0x3f) << 0)
+
+/* Frame Data Type Select */
+#define FRDT_REG 0x18
+
+/* Field Detection Control */
+#define FLD_REG 0x1c
+#define FLD_FLD_NUM(n) (((n) & 0xff) << 16)
+#define FLD_FLD_EN4 (1 << 3)
+#define FLD_FLD_EN3 (1 << 2)
+#define FLD_FLD_EN2 (1 << 1)
+#define FLD_FLD_EN (1 << 0)
+
+/* Automatic Standby Control */
+#define ASTBY_REG 0x20
+
+/* Long Data Type Setting 0 */
+#define LNGDT0_REG 0x28
+
+/* Long Data Type Setting 1 */
+#define LNGDT1_REG 0x2c
+
+/* Interrupt Enable */
+#define INTEN_REG 0x30
+
+/* Interrupt Source Mask */
+#define INTCLOSE_REG 0x34
+
+/* Interrupt Status Monitor */
+#define INTSTATE_REG 0x38
+
+/* Interrupt Error Status Monitor */
+#define INTERRSTATE_REG 0x3c
+
+/* Short Packet Data */
+#define SHPDAT_REG 0x40
+
+/* Short Packet Count */
+#define SHPCNT_REG 0x44
+
+/* LINK Operation Control */
+#define LINKCNT_REG 0x48
+#define LINKCNT_MONITOR_EN (1 << 31)
+#define LINKCNT_REG_MONI_PACT_EN (1 << 25)
+#define LINKCNT_ICLK_NONSTOP (1 << 24)
+
+/* Lane Swap */
+#define LSWAP_REG 0x4c
+#define LSWAP_L3SEL(n) (((n) & 0x3) << 6)
+#define LSWAP_L2SEL(n) (((n) & 0x3) << 4)
+#define LSWAP_L1SEL(n) (((n) & 0x3) << 2)
+#define LSWAP_L0SEL(n) (((n) & 0x3) << 0)
+
+/* PHY Test Interface Clear */
+#define PHTC_REG 0x58
+#define PHTC_TESTCLR (1 << 0)
+
+/* PHY Frequency Control */
+#define PHYPLL_REG 0x68
+#define PHYPLL_HSFREQRANGE(n) ((n) << 16)
+
+struct phypll_hsfreqrange {
+ unsigned int mbps;
+ unsigned char reg;
+};
+
+static const struct phypll_hsfreqrange phypll_hsfreqrange_map[] = {
+ { .mbps = 80, .reg = 0x00 },
+ { .mbps = 90, .reg = 0x10 },
+ { .mbps = 100, .reg = 0x20 },
+ { .mbps = 110, .reg = 0x30 },
+ { .mbps = 120, .reg = 0x01 },
+ { .mbps = 130, .reg = 0x11 },
+ { .mbps = 140, .reg = 0x21 },
+ { .mbps = 150, .reg = 0x31 },
+ { .mbps = 160, .reg = 0x02 },
+ { .mbps = 170, .reg = 0x12 },
+ { .mbps = 180, .reg = 0x22 },
+ { .mbps = 190, .reg = 0x32 },
+ { .mbps = 205, .reg = 0x03 },
+ { .mbps = 220, .reg = 0x13 },
+ { .mbps = 235, .reg = 0x23 },
+ { .mbps = 250, .reg = 0x33 },
+ { .mbps = 275, .reg = 0x04 },
+ { .mbps = 300, .reg = 0x14 },
+ { .mbps = 325, .reg = 0x05 },
+ { .mbps = 350, .reg = 0x15 },
+ { .mbps = 400, .reg = 0x25 },
+ { .mbps = 450, .reg = 0x06 },
+ { .mbps = 500, .reg = 0x16 },
+ { .mbps = 550, .reg = 0x07 },
+ { .mbps = 600, .reg = 0x17 },
+ { .mbps = 650, .reg = 0x08 },
+ { .mbps = 700, .reg = 0x18 },
+ { .mbps = 750, .reg = 0x09 },
+ { .mbps = 800, .reg = 0x19 },
+ { .mbps = 850, .reg = 0x29 },
+ { .mbps = 900, .reg = 0x39 },
+ { .mbps = 950, .reg = 0x0A },
+ { .mbps = 1000, .reg = 0x1A },
+ { .mbps = 1050, .reg = 0x2A },
+ { .mbps = 1100, .reg = 0x3A },
+ { .mbps = 1150, .reg = 0x0B },
+ { .mbps = 1200, .reg = 0x1B },
+ { .mbps = 1250, .reg = 0x2B },
+ { .mbps = 1300, .reg = 0x3B },
+ { .mbps = 1350, .reg = 0x0C },
+ { .mbps = 1400, .reg = 0x1C },
+ { .mbps = 1450, .reg = 0x2C },
+ { .mbps = 1500, .reg = 0x3C },
+ /* guard */
+ { .mbps = 0, .reg = 0x00 },
+};
+
+/* PHY ESC Error Monitor */
+#define PHEERM_REG 0x74
+
+/* PHY Clock Lane Monitor */
+#define PHCLM_REG 0x78
+
+/* PHY Data Lane Monitor */
+#define PHDLM_REG 0x7c
+
+struct rcar_csi2_format {
+ unsigned int code;
+ unsigned int datatype;
+ unsigned int bpp;
+};
+
+static const struct rcar_csi2_format rcar_csi2_formats[] = {
+ { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, .bpp = 24},
+ { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, .bpp = 8 },
+ { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 8 },
+ { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 8 },
+};
+
+static const struct rcar_csi2_format *rcar_csi2_code_to_fmt(unsigned int code)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
+ if (rcar_csi2_formats[i].code == code)
+ return rcar_csi2_formats + i;
+ return NULL;
+}
+
+enum rcar_csi2_pads {
+ RCAR_CSI2_SINK,
+ RCAR_CSI2_SOURCE_VC0,
+ RCAR_CSI2_SOURCE_VC1,
+ RCAR_CSI2_SOURCE_VC2,
+ RCAR_CSI2_SOURCE_VC3,
+ NR_OF_RCAR_CSI2_PAD,
+};
+
+struct rcar_csi2 {
+ struct device *dev;
+ void __iomem *base;
+
+ unsigned short lanes;
+ unsigned char lane_swap[4];
+
+ struct v4l2_subdev subdev;
+ struct media_pad pads[NR_OF_RCAR_CSI2_PAD];
+
+ struct v4l2_mbus_framefmt mf;
+
+ struct mutex lock;
+ int stream_count;
+
+ struct {
+ struct v4l2_async_subdev asd;
+ struct v4l2_subdev *subdev;
+ struct fwnode_handle *fwnode;
+ unsigned int source_pad;
+ } remote;
+};
+
+static inline struct rcar_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct rcar_csi2, subdev);
+}
+
+static u32 rcar_csi2_read(struct rcar_csi2 *priv, unsigned int reg)
+{
+ return ioread32(priv->base + reg);
+}
+
+static void rcar_csi2_write(struct rcar_csi2 *priv, unsigned int reg, u32 data)
+{
+ iowrite32(data, priv->base + reg);
+}
+
+static void rcar_csi2_reset(struct rcar_csi2 *priv)
+{
+ rcar_csi2_write(priv, SRST_REG, SRST_SRST);
+ rcar_csi2_write(priv, SRST_REG, 0);
+}
+
+static int rcar_csi2_wait_phy_start(struct rcar_csi2 *priv)
+{
+ int timeout;
+
+ /* Wait for the clock and data lanes to enter LP-11 state. */
+ for (timeout = 100; timeout >= 0; timeout--) {
+ const u32 lane_mask = (1 << priv->lanes) - 1;
+
+ if ((rcar_csi2_read(priv, PHCLM_REG) & 1) == 1 &&
+ (rcar_csi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask)
+ return 0;
+
+ msleep(20);
+ }
+
+ dev_err(priv->dev, "Timeout waiting for LP-11 state\n");
+
+ return -ETIMEDOUT;
+}
+
+static int rcar_csi2_calc_phypll(struct rcar_csi2 *priv,
+ struct v4l2_subdev *source,
+ struct v4l2_mbus_framefmt *mf,
+ u32 *phypll)
+{
+ const struct phypll_hsfreqrange *hsfreq;
+ const struct rcar_csi2_format *format;
+ struct v4l2_ctrl *ctrl;
+ u64 mbps;
+
+ ctrl = v4l2_ctrl_find(source->ctrl_handler, V4L2_CID_PIXEL_RATE);
+ if (!ctrl) {
+ dev_err(priv->dev, "no link freq control in subdev %s\n",
+ source->name);
+ return -EINVAL;
+ }
+
+ format = rcar_csi2_code_to_fmt(mf->code);
+ if (!format) {
+ dev_err(priv->dev, "Unknown format: %d\n", mf->code);
+ return -EINVAL;
+ }
+
+ mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * format->bpp;
+ do_div(mbps, priv->lanes * 1000000);
+
+ for (hsfreq = phypll_hsfreqrange_map; hsfreq->mbps != 0; hsfreq++)
+ if (hsfreq->mbps >= mbps)
+ break;
+
+ if (!hsfreq->mbps) {
+ dev_err(priv->dev, "Unsupported PHY speed (%llu Mbps)", mbps);
+ return -ERANGE;
+ }
+
+ dev_dbg(priv->dev, "PHY HSFREQRANGE requested %llu got %u Mbps\n", mbps,
+ hsfreq->mbps);
+
+ *phypll = PHYPLL_HSFREQRANGE(hsfreq->reg);
+
+ return 0;
+}
+
+static int rcar_csi2_start(struct rcar_csi2 *priv)
+{
+ const struct rcar_csi2_format *format;
+ struct v4l2_subdev_format fmt;
+ struct media_pad *pad, *source_pad;
+ struct v4l2_subdev *source = NULL;
+ struct v4l2_mbus_framefmt *mf = &fmt.format;
+ u32 phycnt, phypll, tmp;
+ u32 vcdt = 0, vcdt2 = 0;
+ unsigned int i;
+ int ret;
+
+ pad = &priv->subdev.entity.pads[RCAR_CSI2_SINK];
+ source_pad = media_entity_remote_pad(pad);
+ if (!source_pad) {
+ dev_err(priv->dev, "Could not find remote source pad\n");
+ return -ENODEV;
+ }
+
+ source = media_entity_to_v4l2_subdev(source_pad->entity);
+ if (!source) {
+ dev_err(priv->dev, "Could not find remote subdevice\n");
+ return -ENODEV;
+ }
+
+ dev_dbg(priv->dev, "Using source %s pad: %u\n", source->name,
+ source_pad->index);
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = source_pad->index;
+ ret = v4l2_subdev_call(source, pad, get_fmt, NULL, &fmt);
+ if (ret)
+ return ret;
+
+ dev_dbg(priv->dev, "Input size (%dx%d%c)\n", mf->width,
+ mf->height, mf->field == V4L2_FIELD_NONE ? 'p' : 'i');
+
+ /*
+ * Enable all Virtual Channels
+ *
+ * NOTE: It's not possible to get individual format for each
+ * source virtual channel. Once this is possible in V4L2
+ * it should be used here.
+ */
+ for (i = 0; i < 4; i++) {
+ format = rcar_csi2_code_to_fmt(mf->code);
+ if (!format) {
+ dev_err(priv->dev, "Unsupported media bus format: %d\n",
+ mf->code);
+ return -EINVAL;
+ }
+
+ tmp = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
+ VCDT_SEL_DT(format->datatype);
+
+ /* Store in correct reg and offset */
+ if (i < 2)
+ vcdt |= tmp << ((i % 2) * 16);
+ else
+ vcdt2 |= tmp << ((i % 2) * 16);
+ }
+
+ switch (priv->lanes) {
+ case 1:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_0;
+ break;
+ case 2:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
+ break;
+ case 4:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_3 | PHYCNT_ENABLE_2 |
+ PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = rcar_csi2_calc_phypll(priv, source, mf, &phypll);
+ if (ret)
+ return ret;
+
+ /* Init */
+ rcar_csi2_write(priv, TREF_REG, TREF_TREF);
+ rcar_csi2_reset(priv);
+ rcar_csi2_write(priv, PHTC_REG, 0);
+
+ /* Configure */
+ rcar_csi2_write(priv, FLD_REG, FLD_FLD_NUM(2) | FLD_FLD_EN4 |
+ FLD_FLD_EN3 | FLD_FLD_EN2 | FLD_FLD_EN);
+ rcar_csi2_write(priv, VCDT_REG, vcdt);
+ rcar_csi2_write(priv, VCDT2_REG, vcdt2);
+ /* Lanes are zero indexed */
+ rcar_csi2_write(priv, LSWAP_REG,
+ LSWAP_L0SEL(priv->lane_swap[0] - 1) |
+ LSWAP_L1SEL(priv->lane_swap[1] - 1) |
+ LSWAP_L2SEL(priv->lane_swap[2] - 1) |
+ LSWAP_L3SEL(priv->lane_swap[3] - 1));
+
+ /* Start */
+ rcar_csi2_write(priv, PHYPLL_REG, phypll);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt);
+ rcar_csi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN |
+ LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ |
+ PHYCNT_RSTZ);
+
+ return rcar_csi2_wait_phy_start(priv);
+}
+
+static void rcar_csi2_stop(struct rcar_csi2 *priv)
+{
+ rcar_csi2_write(priv, PHYCNT_REG, 0);
+
+ rcar_csi2_reset(priv);
+}
+
+static int rcar_csi2_sd_info(struct rcar_csi2 *priv, struct v4l2_subdev **sd)
+{
+ struct media_pad *pad;
+
+ pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
+ if (!pad) {
+ dev_err(priv->dev, "Could not find remote pad\n");
+ return -ENODEV;
+ }
+
+ *sd = media_entity_to_v4l2_subdev(pad->entity);
+ if (!*sd) {
+ dev_err(priv->dev, "Could not find remote subdevice\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+ struct v4l2_subdev *nextsd;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = rcar_csi2_sd_info(priv, &nextsd);
+ if (ret)
+ goto out;
+
+ priv->stream_count += enable ? 1 : -1;
+
+ if (enable && priv->stream_count == 1) {
+ ret = rcar_csi2_start(priv);
+ if (ret)
+ goto out;
+ ret = v4l2_subdev_call(nextsd, video, s_stream, 1);
+
+ } else if (!enable && !priv->stream_count) {
+ rcar_csi2_stop(priv);
+ ret = v4l2_subdev_call(nextsd, video, s_stream, 0);
+ }
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int rcar_csi2_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+
+ if (on)
+ pm_runtime_get_sync(priv->dev);
+ else
+ pm_runtime_put(priv->dev);
+
+ return 0;
+}
+
+static int rcar_csi2_set_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+ struct v4l2_mbus_framefmt *framefmt;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+ priv->mf = format->format;
+ } else {
+ framefmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+ *framefmt = format->format;
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_get_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ format->format = priv->mf;
+ else
+ format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = {
+ .s_stream = rcar_csi2_s_stream,
+};
+
+static const struct v4l2_subdev_core_ops rcar_csi2_subdev_core_ops = {
+ .s_power = rcar_csi2_s_power,
+};
+
+static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
+ .set_fmt = rcar_csi2_set_pad_format,
+ .get_fmt = rcar_csi2_get_pad_format,
+};
+
+static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
+ .video = &rcar_csi2_video_ops,
+ .core = &rcar_csi2_subdev_core_ops,
+ .pad = &rcar_csi2_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async and registered of subdevices and links
+ */
+
+static int rcar_csi2_notify_complete(struct v4l2_async_notifier *notifier)
+{
+ struct rcar_csi2 *priv =
+ sd_to_csi2(subnotifier_to_v4l2_subdev(notifier));
+
+ return media_create_pad_link(&priv->remote.subdev->entity,
+ priv->remote.source_pad,
+ &priv->subdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+}
+
+static int rcar_csi2_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rcar_csi2 *priv =
+ sd_to_csi2(subnotifier_to_v4l2_subdev(notifier));
+ int ret;
+
+ v4l2_set_subdev_hostdata(subdev, priv);
+
+ ret = media_entity_get_fwnode_pad(&subdev->entity,
+ priv->remote.fwnode,
+ MEDIA_PAD_FL_SOURCE);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to find pad for %s\n",
+ subdev->name);
+ return ret;
+ }
+
+ priv->remote.source_pad = ret;
+ priv->remote.subdev = subdev;
+
+ dev_dbg(priv->dev, "Bound %s pad: %d\n", subdev->name,
+ priv->remote.source_pad);
+
+ return 0;
+}
+
+static void rcar_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rcar_csi2 *priv =
+ sd_to_csi2(subnotifier_to_v4l2_subdev(notifier));
+
+ dev_dbg(priv->dev, "Unbind %s\n", subdev->name);
+ priv->remote.subdev = NULL;
+}
+
+static int rcar_csi2_parse_dt_subdevice(struct rcar_csi2 *priv)
+{
+ struct v4l2_async_subdev **subdevs;
+ struct device_node *remote, *ep;
+ struct v4l2_fwnode_endpoint v4l2_ep;
+ int ret;
+
+ ep = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
+ if (!ep) {
+ dev_err(priv->dev, "Not connected to subdevice\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
+ if (ret) {
+ dev_err(priv->dev, "Could not parse v4l2 endpoint\n");
+ of_node_put(ep);
+ return -EINVAL;
+ }
+
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(priv->dev, "Unknown media bus type: 0x%x\n",
+ v4l2_ep.bus_type);
+ of_node_put(ep);
+ return -EINVAL;
+ }
+
+ priv->remote.fwnode =
+ fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
+
+ priv->remote.asd.match.fwnode.fwnode = priv->remote.fwnode;
+ priv->remote.asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+
+ remote = to_of_node(priv->remote.fwnode);
+ dev_dbg(priv->dev, "Found '%s'\n", of_node_full_name(remote));
+
+ subdevs = devm_kzalloc(priv->dev, sizeof(*subdevs), GFP_KERNEL);
+ if (subdevs == NULL)
+ return -ENOMEM;
+
+ subdevs[0] = &priv->remote.asd;
+
+ return v4l2_async_subdev_register_notifier(&priv->subdev, 1, subdevs,
+ rcar_csi2_notify_bound,
+ rcar_csi2_notify_complete,
+ rcar_csi2_notify_unbind);
+}
+
+/* -----------------------------------------------------------------------------
+ * Platform Device Driver
+ */
+
+static const struct of_device_id rcar_csi2_of_table[] = {
+ { .compatible = "renesas,rcar-gen3-csi2" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rcar_csi2_of_table);
+
+static const struct media_entity_operations rcar_csi2_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static int rcar_csi2_parse_dt_settings(struct rcar_csi2 *priv)
+{
+ struct v4l2_fwnode_endpoint v4l2_ep;
+ struct device_node *ep;
+ unsigned int i;
+ int ret;
+
+ ep = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
+ if (!ep)
+ return -EINVAL;
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
+ of_node_put(ep);
+ if (ret) {
+ dev_err(priv->dev, "Could not parse v4l2 endpoint\n");
+ return -EINVAL;
+ }
+
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(priv->dev, "Unsupported media bus type for %s\n",
+ of_node_full_name(ep));
+ return -EINVAL;
+ }
+
+ priv->lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes;
+ if (priv->lanes != 1 && priv->lanes != 2 && priv->lanes != 4) {
+ dev_err(priv->dev, "Unsupported number of data-lanes: %d\n",
+ priv->lanes);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(priv->lane_swap); i++) {
+ priv->lane_swap[i] = i < priv->lanes ?
+ v4l2_ep.bus.mipi_csi2.data_lanes[i] : i;
+
+ /* Check for valid lane number */
+ if (priv->lane_swap[i] < 1 || priv->lane_swap[i] > 4) {
+ dev_err(priv->dev, "data-lanes must be in 1-4 range\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_probe_resources(struct rcar_csi2 *priv,
+ struct platform_device *pdev)
+{
+ struct resource *mem;
+ int irq;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
+
+ priv->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ return 0;
+}
+
+static int rcar_csi2_probe(struct platform_device *pdev)
+{
+ struct rcar_csi2 *priv;
+ unsigned int i;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ mutex_init(&priv->lock);
+ priv->stream_count = 0;
+
+ ret = rcar_csi2_parse_dt_settings(priv);
+ if (ret)
+ return ret;
+
+ ret = rcar_csi2_parse_dt_subdevice(priv);
+ if (ret)
+ return ret;
+
+ ret = rcar_csi2_probe_resources(priv, pdev);
+ if (ret) {
+ dev_err(priv->dev, "Failed to get resources\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->subdev.owner = THIS_MODULE;
+ priv->subdev.dev = &pdev->dev;
+ v4l2_subdev_init(&priv->subdev, &rcar_csi2_subdev_ops);
+ v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
+ snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s",
+ KBUILD_MODNAME, dev_name(&pdev->dev));
+ priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ priv->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+ priv->subdev.entity.ops = &rcar_csi2_entity_ops;
+
+ priv->pads[RCAR_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
+ for (i = RCAR_CSI2_SOURCE_VC0; i < NR_OF_RCAR_CSI2_PAD; i++)
+ priv->pads[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&priv->subdev.entity, NR_OF_RCAR_CSI2_PAD,
+ priv->pads);
+ if (ret)
+ return ret;
+
+ ret = v4l2_async_register_subdev(&priv->subdev);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_enable(&pdev->dev);
+
+ dev_info(priv->dev, "%d lanes found\n", priv->lanes);
+
+ return 0;
+}
+
+static int rcar_csi2_remove(struct platform_device *pdev)
+{
+ struct rcar_csi2 *priv = platform_get_drvdata(pdev);
+
+ v4l2_async_unregister_subdev(&priv->subdev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver __refdata rcar_csi2_pdrv = {
+ .remove = rcar_csi2_remove,
+ .probe = rcar_csi2_probe,
+ .driver = {
+ .name = "rcar-csi2",
+ .of_match_table = of_match_ptr(rcar_csi2_of_table),
+ },
+};
+
+module_platform_driver(rcar_csi2_pdrv);
+
+MODULE_AUTHOR("Niklas Söderlund <niklas.soderlund-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>");
+MODULE_DESCRIPTION("Renesas R-Car MIPI CSI-2 receiver");
+MODULE_LICENSE("GPL v2");
--
2.13.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v8 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
@ 2017-07-17 17:03 ` Niklas Söderlund
0 siblings, 0 replies; 9+ messages in thread
From: Niklas Söderlund @ 2017-07-17 17:03 UTC (permalink / raw)
To: Laurent Pinchart, Hans Verkuil, linux-media, Rob Herring, devicetree
Cc: linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
Sakari Ailus, Niklas Söderlund
A V4L2 driver for Renesas R-Car MIPI CSI-2 receiver. The driver
supports the rcar-vin driver on R-Car Gen3 SoCs where separate CSI-2
hardware blocks are connected between the video sources and the video
grabbers (VIN).
Driver is based on a prototype by Koji Matsuoka in the Renesas BSP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
drivers/media/platform/rcar-vin/Kconfig | 12 +
drivers/media/platform/rcar-vin/Makefile | 1 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 822 ++++++++++++++++++++++++++++
3 files changed, 835 insertions(+)
create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c
diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig
index af4c98b44d2e22cb..6875f30c1ae42631 100644
--- a/drivers/media/platform/rcar-vin/Kconfig
+++ b/drivers/media/platform/rcar-vin/Kconfig
@@ -1,3 +1,15 @@
+config VIDEO_RCAR_CSI2
+ tristate "R-Car MIPI CSI-2 Receiver"
+ depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select V4L2_FWNODE
+ ---help---
+ Support for Renesas R-Car MIPI CSI-2 receiver.
+ Supports R-Car Gen3 SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rcar-csi2.
+
config VIDEO_RCAR_VIN
tristate "R-Car Video Input (VIN) Driver"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA && MEDIA_CONTROLLER
diff --git a/drivers/media/platform/rcar-vin/Makefile b/drivers/media/platform/rcar-vin/Makefile
index 48c5632c21dc060b..5ab803d3e7c1aa57 100644
--- a/drivers/media/platform/rcar-vin/Makefile
+++ b/drivers/media/platform/rcar-vin/Makefile
@@ -1,3 +1,4 @@
rcar-vin-objs = rcar-core.o rcar-dma.o rcar-v4l2.o
+obj-$(CONFIG_VIDEO_RCAR_CSI2) += rcar-csi2.o
obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin.o
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
new file mode 100644
index 0000000000000000..09a78dce29725a55
--- /dev/null
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -0,0 +1,822 @@
+/*
+ * Driver for Renesas R-Car MIPI CSI-2 Receiver
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+/* Register offsets and bits */
+
+/* Control Timing Select */
+#define TREF_REG 0x00
+#define TREF_TREF (1 << 0)
+
+/* Software Reset */
+#define SRST_REG 0x04
+#define SRST_SRST (1 << 0)
+
+/* PHY Operation Control */
+#define PHYCNT_REG 0x08
+#define PHYCNT_SHUTDOWNZ (1 << 17)
+#define PHYCNT_RSTZ (1 << 16)
+#define PHYCNT_ENABLECLK (1 << 4)
+#define PHYCNT_ENABLE_3 (1 << 3)
+#define PHYCNT_ENABLE_2 (1 << 2)
+#define PHYCNT_ENABLE_1 (1 << 1)
+#define PHYCNT_ENABLE_0 (1 << 0)
+
+/* Checksum Control */
+#define CHKSUM_REG 0x0c
+#define CHKSUM_ECC_EN (1 << 1)
+#define CHKSUM_CRC_EN (1 << 0)
+
+/*
+ * Channel Data Type Select
+ * VCDT[0-15]: Channel 1 VCDT[16-31]: Channel 2
+ * VCDT2[0-15]: Channel 3 VCDT2[16-31]: Channel 4
+ */
+#define VCDT_REG 0x10
+#define VCDT2_REG 0x14
+#define VCDT_VCDTN_EN (1 << 15)
+#define VCDT_SEL_VC(n) (((n) & 0x3) << 8)
+#define VCDT_SEL_DTN_ON (1 << 6)
+#define VCDT_SEL_DT(n) (((n) & 0x3f) << 0)
+
+/* Frame Data Type Select */
+#define FRDT_REG 0x18
+
+/* Field Detection Control */
+#define FLD_REG 0x1c
+#define FLD_FLD_NUM(n) (((n) & 0xff) << 16)
+#define FLD_FLD_EN4 (1 << 3)
+#define FLD_FLD_EN3 (1 << 2)
+#define FLD_FLD_EN2 (1 << 1)
+#define FLD_FLD_EN (1 << 0)
+
+/* Automatic Standby Control */
+#define ASTBY_REG 0x20
+
+/* Long Data Type Setting 0 */
+#define LNGDT0_REG 0x28
+
+/* Long Data Type Setting 1 */
+#define LNGDT1_REG 0x2c
+
+/* Interrupt Enable */
+#define INTEN_REG 0x30
+
+/* Interrupt Source Mask */
+#define INTCLOSE_REG 0x34
+
+/* Interrupt Status Monitor */
+#define INTSTATE_REG 0x38
+
+/* Interrupt Error Status Monitor */
+#define INTERRSTATE_REG 0x3c
+
+/* Short Packet Data */
+#define SHPDAT_REG 0x40
+
+/* Short Packet Count */
+#define SHPCNT_REG 0x44
+
+/* LINK Operation Control */
+#define LINKCNT_REG 0x48
+#define LINKCNT_MONITOR_EN (1 << 31)
+#define LINKCNT_REG_MONI_PACT_EN (1 << 25)
+#define LINKCNT_ICLK_NONSTOP (1 << 24)
+
+/* Lane Swap */
+#define LSWAP_REG 0x4c
+#define LSWAP_L3SEL(n) (((n) & 0x3) << 6)
+#define LSWAP_L2SEL(n) (((n) & 0x3) << 4)
+#define LSWAP_L1SEL(n) (((n) & 0x3) << 2)
+#define LSWAP_L0SEL(n) (((n) & 0x3) << 0)
+
+/* PHY Test Interface Clear */
+#define PHTC_REG 0x58
+#define PHTC_TESTCLR (1 << 0)
+
+/* PHY Frequency Control */
+#define PHYPLL_REG 0x68
+#define PHYPLL_HSFREQRANGE(n) ((n) << 16)
+
+struct phypll_hsfreqrange {
+ unsigned int mbps;
+ unsigned char reg;
+};
+
+static const struct phypll_hsfreqrange phypll_hsfreqrange_map[] = {
+ { .mbps = 80, .reg = 0x00 },
+ { .mbps = 90, .reg = 0x10 },
+ { .mbps = 100, .reg = 0x20 },
+ { .mbps = 110, .reg = 0x30 },
+ { .mbps = 120, .reg = 0x01 },
+ { .mbps = 130, .reg = 0x11 },
+ { .mbps = 140, .reg = 0x21 },
+ { .mbps = 150, .reg = 0x31 },
+ { .mbps = 160, .reg = 0x02 },
+ { .mbps = 170, .reg = 0x12 },
+ { .mbps = 180, .reg = 0x22 },
+ { .mbps = 190, .reg = 0x32 },
+ { .mbps = 205, .reg = 0x03 },
+ { .mbps = 220, .reg = 0x13 },
+ { .mbps = 235, .reg = 0x23 },
+ { .mbps = 250, .reg = 0x33 },
+ { .mbps = 275, .reg = 0x04 },
+ { .mbps = 300, .reg = 0x14 },
+ { .mbps = 325, .reg = 0x05 },
+ { .mbps = 350, .reg = 0x15 },
+ { .mbps = 400, .reg = 0x25 },
+ { .mbps = 450, .reg = 0x06 },
+ { .mbps = 500, .reg = 0x16 },
+ { .mbps = 550, .reg = 0x07 },
+ { .mbps = 600, .reg = 0x17 },
+ { .mbps = 650, .reg = 0x08 },
+ { .mbps = 700, .reg = 0x18 },
+ { .mbps = 750, .reg = 0x09 },
+ { .mbps = 800, .reg = 0x19 },
+ { .mbps = 850, .reg = 0x29 },
+ { .mbps = 900, .reg = 0x39 },
+ { .mbps = 950, .reg = 0x0A },
+ { .mbps = 1000, .reg = 0x1A },
+ { .mbps = 1050, .reg = 0x2A },
+ { .mbps = 1100, .reg = 0x3A },
+ { .mbps = 1150, .reg = 0x0B },
+ { .mbps = 1200, .reg = 0x1B },
+ { .mbps = 1250, .reg = 0x2B },
+ { .mbps = 1300, .reg = 0x3B },
+ { .mbps = 1350, .reg = 0x0C },
+ { .mbps = 1400, .reg = 0x1C },
+ { .mbps = 1450, .reg = 0x2C },
+ { .mbps = 1500, .reg = 0x3C },
+ /* guard */
+ { .mbps = 0, .reg = 0x00 },
+};
+
+/* PHY ESC Error Monitor */
+#define PHEERM_REG 0x74
+
+/* PHY Clock Lane Monitor */
+#define PHCLM_REG 0x78
+
+/* PHY Data Lane Monitor */
+#define PHDLM_REG 0x7c
+
+struct rcar_csi2_format {
+ unsigned int code;
+ unsigned int datatype;
+ unsigned int bpp;
+};
+
+static const struct rcar_csi2_format rcar_csi2_formats[] = {
+ { .code = MEDIA_BUS_FMT_RGB888_1X24, .datatype = 0x24, .bpp = 24},
+ { .code = MEDIA_BUS_FMT_UYVY8_1X16, .datatype = 0x1e, .bpp = 8 },
+ { .code = MEDIA_BUS_FMT_UYVY8_2X8, .datatype = 0x1e, .bpp = 8 },
+ { .code = MEDIA_BUS_FMT_YUYV10_2X10, .datatype = 0x1e, .bpp = 8 },
+};
+
+static const struct rcar_csi2_format *rcar_csi2_code_to_fmt(unsigned int code)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
+ if (rcar_csi2_formats[i].code == code)
+ return rcar_csi2_formats + i;
+ return NULL;
+}
+
+enum rcar_csi2_pads {
+ RCAR_CSI2_SINK,
+ RCAR_CSI2_SOURCE_VC0,
+ RCAR_CSI2_SOURCE_VC1,
+ RCAR_CSI2_SOURCE_VC2,
+ RCAR_CSI2_SOURCE_VC3,
+ NR_OF_RCAR_CSI2_PAD,
+};
+
+struct rcar_csi2 {
+ struct device *dev;
+ void __iomem *base;
+
+ unsigned short lanes;
+ unsigned char lane_swap[4];
+
+ struct v4l2_subdev subdev;
+ struct media_pad pads[NR_OF_RCAR_CSI2_PAD];
+
+ struct v4l2_mbus_framefmt mf;
+
+ struct mutex lock;
+ int stream_count;
+
+ struct {
+ struct v4l2_async_subdev asd;
+ struct v4l2_subdev *subdev;
+ struct fwnode_handle *fwnode;
+ unsigned int source_pad;
+ } remote;
+};
+
+static inline struct rcar_csi2 *sd_to_csi2(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct rcar_csi2, subdev);
+}
+
+static u32 rcar_csi2_read(struct rcar_csi2 *priv, unsigned int reg)
+{
+ return ioread32(priv->base + reg);
+}
+
+static void rcar_csi2_write(struct rcar_csi2 *priv, unsigned int reg, u32 data)
+{
+ iowrite32(data, priv->base + reg);
+}
+
+static void rcar_csi2_reset(struct rcar_csi2 *priv)
+{
+ rcar_csi2_write(priv, SRST_REG, SRST_SRST);
+ rcar_csi2_write(priv, SRST_REG, 0);
+}
+
+static int rcar_csi2_wait_phy_start(struct rcar_csi2 *priv)
+{
+ int timeout;
+
+ /* Wait for the clock and data lanes to enter LP-11 state. */
+ for (timeout = 100; timeout >= 0; timeout--) {
+ const u32 lane_mask = (1 << priv->lanes) - 1;
+
+ if ((rcar_csi2_read(priv, PHCLM_REG) & 1) == 1 &&
+ (rcar_csi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask)
+ return 0;
+
+ msleep(20);
+ }
+
+ dev_err(priv->dev, "Timeout waiting for LP-11 state\n");
+
+ return -ETIMEDOUT;
+}
+
+static int rcar_csi2_calc_phypll(struct rcar_csi2 *priv,
+ struct v4l2_subdev *source,
+ struct v4l2_mbus_framefmt *mf,
+ u32 *phypll)
+{
+ const struct phypll_hsfreqrange *hsfreq;
+ const struct rcar_csi2_format *format;
+ struct v4l2_ctrl *ctrl;
+ u64 mbps;
+
+ ctrl = v4l2_ctrl_find(source->ctrl_handler, V4L2_CID_PIXEL_RATE);
+ if (!ctrl) {
+ dev_err(priv->dev, "no link freq control in subdev %s\n",
+ source->name);
+ return -EINVAL;
+ }
+
+ format = rcar_csi2_code_to_fmt(mf->code);
+ if (!format) {
+ dev_err(priv->dev, "Unknown format: %d\n", mf->code);
+ return -EINVAL;
+ }
+
+ mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * format->bpp;
+ do_div(mbps, priv->lanes * 1000000);
+
+ for (hsfreq = phypll_hsfreqrange_map; hsfreq->mbps != 0; hsfreq++)
+ if (hsfreq->mbps >= mbps)
+ break;
+
+ if (!hsfreq->mbps) {
+ dev_err(priv->dev, "Unsupported PHY speed (%llu Mbps)", mbps);
+ return -ERANGE;
+ }
+
+ dev_dbg(priv->dev, "PHY HSFREQRANGE requested %llu got %u Mbps\n", mbps,
+ hsfreq->mbps);
+
+ *phypll = PHYPLL_HSFREQRANGE(hsfreq->reg);
+
+ return 0;
+}
+
+static int rcar_csi2_start(struct rcar_csi2 *priv)
+{
+ const struct rcar_csi2_format *format;
+ struct v4l2_subdev_format fmt;
+ struct media_pad *pad, *source_pad;
+ struct v4l2_subdev *source = NULL;
+ struct v4l2_mbus_framefmt *mf = &fmt.format;
+ u32 phycnt, phypll, tmp;
+ u32 vcdt = 0, vcdt2 = 0;
+ unsigned int i;
+ int ret;
+
+ pad = &priv->subdev.entity.pads[RCAR_CSI2_SINK];
+ source_pad = media_entity_remote_pad(pad);
+ if (!source_pad) {
+ dev_err(priv->dev, "Could not find remote source pad\n");
+ return -ENODEV;
+ }
+
+ source = media_entity_to_v4l2_subdev(source_pad->entity);
+ if (!source) {
+ dev_err(priv->dev, "Could not find remote subdevice\n");
+ return -ENODEV;
+ }
+
+ dev_dbg(priv->dev, "Using source %s pad: %u\n", source->name,
+ source_pad->index);
+
+ fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.pad = source_pad->index;
+ ret = v4l2_subdev_call(source, pad, get_fmt, NULL, &fmt);
+ if (ret)
+ return ret;
+
+ dev_dbg(priv->dev, "Input size (%dx%d%c)\n", mf->width,
+ mf->height, mf->field == V4L2_FIELD_NONE ? 'p' : 'i');
+
+ /*
+ * Enable all Virtual Channels
+ *
+ * NOTE: It's not possible to get individual format for each
+ * source virtual channel. Once this is possible in V4L2
+ * it should be used here.
+ */
+ for (i = 0; i < 4; i++) {
+ format = rcar_csi2_code_to_fmt(mf->code);
+ if (!format) {
+ dev_err(priv->dev, "Unsupported media bus format: %d\n",
+ mf->code);
+ return -EINVAL;
+ }
+
+ tmp = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
+ VCDT_SEL_DT(format->datatype);
+
+ /* Store in correct reg and offset */
+ if (i < 2)
+ vcdt |= tmp << ((i % 2) * 16);
+ else
+ vcdt2 |= tmp << ((i % 2) * 16);
+ }
+
+ switch (priv->lanes) {
+ case 1:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_0;
+ break;
+ case 2:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
+ break;
+ case 4:
+ phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_3 | PHYCNT_ENABLE_2 |
+ PHYCNT_ENABLE_1 | PHYCNT_ENABLE_0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = rcar_csi2_calc_phypll(priv, source, mf, &phypll);
+ if (ret)
+ return ret;
+
+ /* Init */
+ rcar_csi2_write(priv, TREF_REG, TREF_TREF);
+ rcar_csi2_reset(priv);
+ rcar_csi2_write(priv, PHTC_REG, 0);
+
+ /* Configure */
+ rcar_csi2_write(priv, FLD_REG, FLD_FLD_NUM(2) | FLD_FLD_EN4 |
+ FLD_FLD_EN3 | FLD_FLD_EN2 | FLD_FLD_EN);
+ rcar_csi2_write(priv, VCDT_REG, vcdt);
+ rcar_csi2_write(priv, VCDT2_REG, vcdt2);
+ /* Lanes are zero indexed */
+ rcar_csi2_write(priv, LSWAP_REG,
+ LSWAP_L0SEL(priv->lane_swap[0] - 1) |
+ LSWAP_L1SEL(priv->lane_swap[1] - 1) |
+ LSWAP_L2SEL(priv->lane_swap[2] - 1) |
+ LSWAP_L3SEL(priv->lane_swap[3] - 1));
+
+ /* Start */
+ rcar_csi2_write(priv, PHYPLL_REG, phypll);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt);
+ rcar_csi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN |
+ LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
+ rcar_csi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ |
+ PHYCNT_RSTZ);
+
+ return rcar_csi2_wait_phy_start(priv);
+}
+
+static void rcar_csi2_stop(struct rcar_csi2 *priv)
+{
+ rcar_csi2_write(priv, PHYCNT_REG, 0);
+
+ rcar_csi2_reset(priv);
+}
+
+static int rcar_csi2_sd_info(struct rcar_csi2 *priv, struct v4l2_subdev **sd)
+{
+ struct media_pad *pad;
+
+ pad = media_entity_remote_pad(&priv->pads[RCAR_CSI2_SINK]);
+ if (!pad) {
+ dev_err(priv->dev, "Could not find remote pad\n");
+ return -ENODEV;
+ }
+
+ *sd = media_entity_to_v4l2_subdev(pad->entity);
+ if (!*sd) {
+ dev_err(priv->dev, "Could not find remote subdevice\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+ struct v4l2_subdev *nextsd;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = rcar_csi2_sd_info(priv, &nextsd);
+ if (ret)
+ goto out;
+
+ priv->stream_count += enable ? 1 : -1;
+
+ if (enable && priv->stream_count == 1) {
+ ret = rcar_csi2_start(priv);
+ if (ret)
+ goto out;
+ ret = v4l2_subdev_call(nextsd, video, s_stream, 1);
+
+ } else if (!enable && !priv->stream_count) {
+ rcar_csi2_stop(priv);
+ ret = v4l2_subdev_call(nextsd, video, s_stream, 0);
+ }
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int rcar_csi2_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+
+ if (on)
+ pm_runtime_get_sync(priv->dev);
+ else
+ pm_runtime_put(priv->dev);
+
+ return 0;
+}
+
+static int rcar_csi2_set_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+ struct v4l2_mbus_framefmt *framefmt;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+ priv->mf = format->format;
+ } else {
+ framefmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+ *framefmt = format->format;
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_get_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ format->format = priv->mf;
+ else
+ format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = {
+ .s_stream = rcar_csi2_s_stream,
+};
+
+static const struct v4l2_subdev_core_ops rcar_csi2_subdev_core_ops = {
+ .s_power = rcar_csi2_s_power,
+};
+
+static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
+ .set_fmt = rcar_csi2_set_pad_format,
+ .get_fmt = rcar_csi2_get_pad_format,
+};
+
+static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
+ .video = &rcar_csi2_video_ops,
+ .core = &rcar_csi2_subdev_core_ops,
+ .pad = &rcar_csi2_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * Async and registered of subdevices and links
+ */
+
+static int rcar_csi2_notify_complete(struct v4l2_async_notifier *notifier)
+{
+ struct rcar_csi2 *priv =
+ sd_to_csi2(subnotifier_to_v4l2_subdev(notifier));
+
+ return media_create_pad_link(&priv->remote.subdev->entity,
+ priv->remote.source_pad,
+ &priv->subdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+}
+
+static int rcar_csi2_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rcar_csi2 *priv =
+ sd_to_csi2(subnotifier_to_v4l2_subdev(notifier));
+ int ret;
+
+ v4l2_set_subdev_hostdata(subdev, priv);
+
+ ret = media_entity_get_fwnode_pad(&subdev->entity,
+ priv->remote.fwnode,
+ MEDIA_PAD_FL_SOURCE);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to find pad for %s\n",
+ subdev->name);
+ return ret;
+ }
+
+ priv->remote.source_pad = ret;
+ priv->remote.subdev = subdev;
+
+ dev_dbg(priv->dev, "Bound %s pad: %d\n", subdev->name,
+ priv->remote.source_pad);
+
+ return 0;
+}
+
+static void rcar_csi2_notify_unbind(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct rcar_csi2 *priv =
+ sd_to_csi2(subnotifier_to_v4l2_subdev(notifier));
+
+ dev_dbg(priv->dev, "Unbind %s\n", subdev->name);
+ priv->remote.subdev = NULL;
+}
+
+static int rcar_csi2_parse_dt_subdevice(struct rcar_csi2 *priv)
+{
+ struct v4l2_async_subdev **subdevs;
+ struct device_node *remote, *ep;
+ struct v4l2_fwnode_endpoint v4l2_ep;
+ int ret;
+
+ ep = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
+ if (!ep) {
+ dev_err(priv->dev, "Not connected to subdevice\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
+ if (ret) {
+ dev_err(priv->dev, "Could not parse v4l2 endpoint\n");
+ of_node_put(ep);
+ return -EINVAL;
+ }
+
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(priv->dev, "Unknown media bus type: 0x%x\n",
+ v4l2_ep.bus_type);
+ of_node_put(ep);
+ return -EINVAL;
+ }
+
+ priv->remote.fwnode =
+ fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
+
+ priv->remote.asd.match.fwnode.fwnode = priv->remote.fwnode;
+ priv->remote.asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+
+ remote = to_of_node(priv->remote.fwnode);
+ dev_dbg(priv->dev, "Found '%s'\n", of_node_full_name(remote));
+
+ subdevs = devm_kzalloc(priv->dev, sizeof(*subdevs), GFP_KERNEL);
+ if (subdevs == NULL)
+ return -ENOMEM;
+
+ subdevs[0] = &priv->remote.asd;
+
+ return v4l2_async_subdev_register_notifier(&priv->subdev, 1, subdevs,
+ rcar_csi2_notify_bound,
+ rcar_csi2_notify_complete,
+ rcar_csi2_notify_unbind);
+}
+
+/* -----------------------------------------------------------------------------
+ * Platform Device Driver
+ */
+
+static const struct of_device_id rcar_csi2_of_table[] = {
+ { .compatible = "renesas,rcar-gen3-csi2" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rcar_csi2_of_table);
+
+static const struct media_entity_operations rcar_csi2_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+static int rcar_csi2_parse_dt_settings(struct rcar_csi2 *priv)
+{
+ struct v4l2_fwnode_endpoint v4l2_ep;
+ struct device_node *ep;
+ unsigned int i;
+ int ret;
+
+ ep = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
+ if (!ep)
+ return -EINVAL;
+
+ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep);
+ of_node_put(ep);
+ if (ret) {
+ dev_err(priv->dev, "Could not parse v4l2 endpoint\n");
+ return -EINVAL;
+ }
+
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(priv->dev, "Unsupported media bus type for %s\n",
+ of_node_full_name(ep));
+ return -EINVAL;
+ }
+
+ priv->lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes;
+ if (priv->lanes != 1 && priv->lanes != 2 && priv->lanes != 4) {
+ dev_err(priv->dev, "Unsupported number of data-lanes: %d\n",
+ priv->lanes);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(priv->lane_swap); i++) {
+ priv->lane_swap[i] = i < priv->lanes ?
+ v4l2_ep.bus.mipi_csi2.data_lanes[i] : i;
+
+ /* Check for valid lane number */
+ if (priv->lane_swap[i] < 1 || priv->lane_swap[i] > 4) {
+ dev_err(priv->dev, "data-lanes must be in 1-4 range\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int rcar_csi2_probe_resources(struct rcar_csi2 *priv,
+ struct platform_device *pdev)
+{
+ struct resource *mem;
+ int irq;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -ENODEV;
+
+ priv->base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ return 0;
+}
+
+static int rcar_csi2_probe(struct platform_device *pdev)
+{
+ struct rcar_csi2 *priv;
+ unsigned int i;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ mutex_init(&priv->lock);
+ priv->stream_count = 0;
+
+ ret = rcar_csi2_parse_dt_settings(priv);
+ if (ret)
+ return ret;
+
+ ret = rcar_csi2_parse_dt_subdevice(priv);
+ if (ret)
+ return ret;
+
+ ret = rcar_csi2_probe_resources(priv, pdev);
+ if (ret) {
+ dev_err(priv->dev, "Failed to get resources\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->subdev.owner = THIS_MODULE;
+ priv->subdev.dev = &pdev->dev;
+ v4l2_subdev_init(&priv->subdev, &rcar_csi2_subdev_ops);
+ v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
+ snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s",
+ KBUILD_MODNAME, dev_name(&pdev->dev));
+ priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ priv->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+ priv->subdev.entity.ops = &rcar_csi2_entity_ops;
+
+ priv->pads[RCAR_CSI2_SINK].flags = MEDIA_PAD_FL_SINK;
+ for (i = RCAR_CSI2_SOURCE_VC0; i < NR_OF_RCAR_CSI2_PAD; i++)
+ priv->pads[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ ret = media_entity_pads_init(&priv->subdev.entity, NR_OF_RCAR_CSI2_PAD,
+ priv->pads);
+ if (ret)
+ return ret;
+
+ ret = v4l2_async_register_subdev(&priv->subdev);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_enable(&pdev->dev);
+
+ dev_info(priv->dev, "%d lanes found\n", priv->lanes);
+
+ return 0;
+}
+
+static int rcar_csi2_remove(struct platform_device *pdev)
+{
+ struct rcar_csi2 *priv = platform_get_drvdata(pdev);
+
+ v4l2_async_unregister_subdev(&priv->subdev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver __refdata rcar_csi2_pdrv = {
+ .remove = rcar_csi2_remove,
+ .probe = rcar_csi2_probe,
+ .driver = {
+ .name = "rcar-csi2",
+ .of_match_table = of_match_ptr(rcar_csi2_of_table),
+ },
+};
+
+module_platform_driver(rcar_csi2_pdrv);
+
+MODULE_AUTHOR("Niklas Söderlund <niklas.soderlund@ragnatech.se>");
+MODULE_DESCRIPTION("Renesas R-Car MIPI CSI-2 receiver");
+MODULE_LICENSE("GPL v2");
--
2.13.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v8 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
2017-07-17 17:03 ` Niklas Söderlund
(?)
@ 2017-07-24 17:46 ` Rob Herring
-1 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2017-07-24 17:46 UTC (permalink / raw)
To: Niklas Söderlund
Cc: Laurent Pinchart, Hans Verkuil,
linux-media-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA,
tomoharu.fukawa.eb-zM6kxYcvzFBBDgjK7y7TUQ, Kieran Bingham,
Sakari Ailus
On Mon, Jul 17, 2017 at 07:03:55PM +0200, Niklas Söderlund wrote:
> Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
> are located between the video sources (CSI-2 transmitters) and the video
> grabbers (VIN) on Gen3 of Renesas R-Car SoC.
>
> Each CSI-2 device is connected to more then one VIN device which
> simultaneously can receive video from the same CSI-2 device. Each VIN
> device can also be connected to more then one CSI-2 device. The routing
> of which link are used are controlled by the VIN devices. There are only
> a few possible routes which are set by hardware limitations, which are
> different for each SoC in the Gen3 family.
>
> To work with the limitations of routing possibilities it is necessary
> for the DT bindings to describe which VIN device is connected to which
> CSI-2 device. This is why port 1 needs to to assign reg numbers for each
> VIN device that be connected to it. To setup and to know which links are
> valid for each SoC is the responsibility of the VIN driver since the
> register to configure it belongs to the VIN hardware.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
> ---
> .../devicetree/bindings/media/rcar-csi2.txt | 118 +++++++++++++++++++++
> 1 file changed, 118 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
>
> diff --git a/Documentation/devicetree/bindings/media/rcar-csi2.txt b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> new file mode 100644
> index 0000000000000000..c298a7d821153219
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> @@ -0,0 +1,118 @@
> +Renesas R-Car MIPI CSI-2
> +------------------------
> +
> +The rcar-csi2 device provides MIPI CSI-2 capabilities for the Renesas R-Car
> +family of devices. It is to be used in conjunction with the R-Car VIN module,
> +which provides the video capture capabilities.
> +
> +Mandatory properties
> +--------------------
> + - compatible: Must be one or more of the following
> + - "renesas,r8a7795-csi2" for the R8A7795 device.
> + - "renesas,r8a7796-csi2" for the R8A7796 device.
> + - "renesas,rcar-gen3-csi2" for a generic R-Car Gen3 compatible device.
> +
> + When compatible with a generic version nodes must list the
> + SoC-specific version corresponding to the platform first
> + followed by the generic version.
> +
> + - reg: the register base and size for the device registers
> + - interrupts: the interrupt for the device
> + - clocks: Reference to the parent clock
> +
> +The device node shall contain two 'port' child nodes according to the
> +bindings defined in Documentation/devicetree/bindings/media/
> +video-interfaces.txt. Port 0 shall connect the node that is the video
> +source for to the CSI-2. Port 1 shall connect all the R-Car VIN
> +modules, which can make use of the CSI-2 module.
> +
> +- Port 0 - Video source (Mandatory)
> + - Reg 0 - sub-node describing the endpoint that is the video source
Endpoint 0
It's not very clear that you are talking endpoints here. I had to look
at the example.
> +
> +- Port 1 - VIN instances (Mandatory for all VIN present in the SoC)
> + - Reg 0 - sub-node describing the endpoint that is VIN0
Endpoint 0
> + - Reg 1 - sub-node describing the endpoint that is VIN1
and so on.
> + - Reg 2 - sub-node describing the endpoint that is VIN2
> + - Reg 3 - sub-node describing the endpoint that is VIN3
> + - Reg 4 - sub-node describing the endpoint that is VIN4
> + - Reg 5 - sub-node describing the endpoint that is VIN5
> + - Reg 6 - sub-node describing the endpoint that is VIN6
> + - Reg 7 - sub-node describing the endpoint that is VIN7
> +
> +Example:
> +
> +/* SoC properties */
> +
> + csi20: csi2@fea80000 {
> + compatible = "renesas,r8a7796-csi2";
> + reg = <0 0xfea80000 0 0x10000>;
> + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 714>;
> + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> + status = "disabled";
Don't show status in examples.
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <1>;
> +
> + csi20vin0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&vin0csi20>;
> + };
> + csi20vin1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&vin1csi20>;
> + };
> + csi20vin2: endpoint@2 {
> + reg = <2>;
> + remote-endpoint = <&vin2csi20>;
> + };
> + csi20vin3: endpoint@3 {
> + reg = <3>;
> + remote-endpoint = <&vin3csi20>;
> + };
> + csi20vin4: endpoint@4 {
> + reg = <4>;
> + remote-endpoint = <&vin4csi20>;
> + };
> + csi20vin5: endpoint@5 {
> + reg = <5>;
> + remote-endpoint = <&vin5csi20>;
> + };
> + csi20vin6: endpoint@6 {
> + reg = <6>;
> + remote-endpoint = <&vin6csi20>;
> + };
> + csi20vin7: endpoint@7 {
> + reg = <7>;
> + remote-endpoint = <&vin7csi20>;
> + };
> + };
> + };
> + };
> +
> +/* Board properties */
Don't split the example. This is source convention which is independent
of the binding.
> +
> + &csi20 {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
Missing #address-cells and #size-cells.
> + csi20_in: endpoint@0 {
> + clock-lanes = <0>;
> + data-lanes = <1>;
> + remote-endpoint = <&adv7482_txb>;
> + };
> + };
> + };
> + };
> --
> 2.13.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v8 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
@ 2017-07-24 17:46 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2017-07-24 17:46 UTC (permalink / raw)
To: Niklas Söderlund
Cc: Laurent Pinchart, Hans Verkuil, linux-media, devicetree,
linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
Sakari Ailus
On Mon, Jul 17, 2017 at 07:03:55PM +0200, Niklas Söderlund wrote:
> Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
> are located between the video sources (CSI-2 transmitters) and the video
> grabbers (VIN) on Gen3 of Renesas R-Car SoC.
>
> Each CSI-2 device is connected to more then one VIN device which
> simultaneously can receive video from the same CSI-2 device. Each VIN
> device can also be connected to more then one CSI-2 device. The routing
> of which link are used are controlled by the VIN devices. There are only
> a few possible routes which are set by hardware limitations, which are
> different for each SoC in the Gen3 family.
>
> To work with the limitations of routing possibilities it is necessary
> for the DT bindings to describe which VIN device is connected to which
> CSI-2 device. This is why port 1 needs to to assign reg numbers for each
> VIN device that be connected to it. To setup and to know which links are
> valid for each SoC is the responsibility of the VIN driver since the
> register to configure it belongs to the VIN hardware.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> .../devicetree/bindings/media/rcar-csi2.txt | 118 +++++++++++++++++++++
> 1 file changed, 118 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
>
> diff --git a/Documentation/devicetree/bindings/media/rcar-csi2.txt b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> new file mode 100644
> index 0000000000000000..c298a7d821153219
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> @@ -0,0 +1,118 @@
> +Renesas R-Car MIPI CSI-2
> +------------------------
> +
> +The rcar-csi2 device provides MIPI CSI-2 capabilities for the Renesas R-Car
> +family of devices. It is to be used in conjunction with the R-Car VIN module,
> +which provides the video capture capabilities.
> +
> +Mandatory properties
> +--------------------
> + - compatible: Must be one or more of the following
> + - "renesas,r8a7795-csi2" for the R8A7795 device.
> + - "renesas,r8a7796-csi2" for the R8A7796 device.
> + - "renesas,rcar-gen3-csi2" for a generic R-Car Gen3 compatible device.
> +
> + When compatible with a generic version nodes must list the
> + SoC-specific version corresponding to the platform first
> + followed by the generic version.
> +
> + - reg: the register base and size for the device registers
> + - interrupts: the interrupt for the device
> + - clocks: Reference to the parent clock
> +
> +The device node shall contain two 'port' child nodes according to the
> +bindings defined in Documentation/devicetree/bindings/media/
> +video-interfaces.txt. Port 0 shall connect the node that is the video
> +source for to the CSI-2. Port 1 shall connect all the R-Car VIN
> +modules, which can make use of the CSI-2 module.
> +
> +- Port 0 - Video source (Mandatory)
> + - Reg 0 - sub-node describing the endpoint that is the video source
Endpoint 0
It's not very clear that you are talking endpoints here. I had to look
at the example.
> +
> +- Port 1 - VIN instances (Mandatory for all VIN present in the SoC)
> + - Reg 0 - sub-node describing the endpoint that is VIN0
Endpoint 0
> + - Reg 1 - sub-node describing the endpoint that is VIN1
and so on.
> + - Reg 2 - sub-node describing the endpoint that is VIN2
> + - Reg 3 - sub-node describing the endpoint that is VIN3
> + - Reg 4 - sub-node describing the endpoint that is VIN4
> + - Reg 5 - sub-node describing the endpoint that is VIN5
> + - Reg 6 - sub-node describing the endpoint that is VIN6
> + - Reg 7 - sub-node describing the endpoint that is VIN7
> +
> +Example:
> +
> +/* SoC properties */
> +
> + csi20: csi2@fea80000 {
> + compatible = "renesas,r8a7796-csi2";
> + reg = <0 0xfea80000 0 0x10000>;
> + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 714>;
> + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> + status = "disabled";
Don't show status in examples.
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <1>;
> +
> + csi20vin0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&vin0csi20>;
> + };
> + csi20vin1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&vin1csi20>;
> + };
> + csi20vin2: endpoint@2 {
> + reg = <2>;
> + remote-endpoint = <&vin2csi20>;
> + };
> + csi20vin3: endpoint@3 {
> + reg = <3>;
> + remote-endpoint = <&vin3csi20>;
> + };
> + csi20vin4: endpoint@4 {
> + reg = <4>;
> + remote-endpoint = <&vin4csi20>;
> + };
> + csi20vin5: endpoint@5 {
> + reg = <5>;
> + remote-endpoint = <&vin5csi20>;
> + };
> + csi20vin6: endpoint@6 {
> + reg = <6>;
> + remote-endpoint = <&vin6csi20>;
> + };
> + csi20vin7: endpoint@7 {
> + reg = <7>;
> + remote-endpoint = <&vin7csi20>;
> + };
> + };
> + };
> + };
> +
> +/* Board properties */
Don't split the example. This is source convention which is independent
of the binding.
> +
> + &csi20 {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
Missing #address-cells and #size-cells.
> + csi20_in: endpoint@0 {
> + clock-lanes = <0>;
> + data-lanes = <1>;
> + remote-endpoint = <&adv7482_txb>;
> + };
> + };
> + };
> + };
> --
> 2.13.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v8 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
@ 2017-07-24 17:46 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2017-07-24 17:46 UTC (permalink / raw)
To: Niklas Söderlund
Cc: Laurent Pinchart, Hans Verkuil, linux-media, devicetree,
linux-renesas-soc, tomoharu.fukawa.eb, Kieran Bingham,
Sakari Ailus
On Mon, Jul 17, 2017 at 07:03:55PM +0200, Niklas S�derlund wrote:
> Documentation for Renesas R-Car MIPI CSI-2 receiver. The CSI-2 receivers
> are located between the video sources (CSI-2 transmitters) and the video
> grabbers (VIN) on Gen3 of Renesas R-Car SoC.
>
> Each CSI-2 device is connected to more then one VIN device which
> simultaneously can receive video from the same CSI-2 device. Each VIN
> device can also be connected to more then one CSI-2 device. The routing
> of which link are used are controlled by the VIN devices. There are only
> a few possible routes which are set by hardware limitations, which are
> different for each SoC in the Gen3 family.
>
> To work with the limitations of routing possibilities it is necessary
> for the DT bindings to describe which VIN device is connected to which
> CSI-2 device. This is why port 1 needs to to assign reg numbers for each
> VIN device that be connected to it. To setup and to know which links are
> valid for each SoC is the responsibility of the VIN driver since the
> register to configure it belongs to the VIN hardware.
>
> Signed-off-by: Niklas S�derlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> .../devicetree/bindings/media/rcar-csi2.txt | 118 +++++++++++++++++++++
> 1 file changed, 118 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
>
> diff --git a/Documentation/devicetree/bindings/media/rcar-csi2.txt b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> new file mode 100644
> index 0000000000000000..c298a7d821153219
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/rcar-csi2.txt
> @@ -0,0 +1,118 @@
> +Renesas R-Car MIPI CSI-2
> +------------------------
> +
> +The rcar-csi2 device provides MIPI CSI-2 capabilities for the Renesas R-Car
> +family of devices. It is to be used in conjunction with the R-Car VIN module,
> +which provides the video capture capabilities.
> +
> +Mandatory properties
> +--------------------
> + - compatible: Must be one or more of the following
> + - "renesas,r8a7795-csi2" for the R8A7795 device.
> + - "renesas,r8a7796-csi2" for the R8A7796 device.
> + - "renesas,rcar-gen3-csi2" for a generic R-Car Gen3 compatible device.
> +
> + When compatible with a generic version nodes must list the
> + SoC-specific version corresponding to the platform first
> + followed by the generic version.
> +
> + - reg: the register base and size for the device registers
> + - interrupts: the interrupt for the device
> + - clocks: Reference to the parent clock
> +
> +The device node shall contain two 'port' child nodes according to the
> +bindings defined in Documentation/devicetree/bindings/media/
> +video-interfaces.txt. Port 0 shall connect the node that is the video
> +source for to the CSI-2. Port 1 shall connect all the R-Car VIN
> +modules, which can make use of the CSI-2 module.
> +
> +- Port 0 - Video source (Mandatory)
> + - Reg 0 - sub-node describing the endpoint that is the video source
Endpoint 0
It's not very clear that you are talking endpoints here. I had to look
at the example.
> +
> +- Port 1 - VIN instances (Mandatory for all VIN present in the SoC)
> + - Reg 0 - sub-node describing the endpoint that is VIN0
Endpoint 0
> + - Reg 1 - sub-node describing the endpoint that is VIN1
and so on.
> + - Reg 2 - sub-node describing the endpoint that is VIN2
> + - Reg 3 - sub-node describing the endpoint that is VIN3
> + - Reg 4 - sub-node describing the endpoint that is VIN4
> + - Reg 5 - sub-node describing the endpoint that is VIN5
> + - Reg 6 - sub-node describing the endpoint that is VIN6
> + - Reg 7 - sub-node describing the endpoint that is VIN7
> +
> +Example:
> +
> +/* SoC properties */
> +
> + csi20: csi2@fea80000 {
> + compatible = "renesas,r8a7796-csi2";
> + reg = <0 0xfea80000 0 0x10000>;
> + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 714>;
> + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> + status = "disabled";
Don't show status in examples.
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <1>;
> +
> + csi20vin0: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&vin0csi20>;
> + };
> + csi20vin1: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&vin1csi20>;
> + };
> + csi20vin2: endpoint@2 {
> + reg = <2>;
> + remote-endpoint = <&vin2csi20>;
> + };
> + csi20vin3: endpoint@3 {
> + reg = <3>;
> + remote-endpoint = <&vin3csi20>;
> + };
> + csi20vin4: endpoint@4 {
> + reg = <4>;
> + remote-endpoint = <&vin4csi20>;
> + };
> + csi20vin5: endpoint@5 {
> + reg = <5>;
> + remote-endpoint = <&vin5csi20>;
> + };
> + csi20vin6: endpoint@6 {
> + reg = <6>;
> + remote-endpoint = <&vin6csi20>;
> + };
> + csi20vin7: endpoint@7 {
> + reg = <7>;
> + remote-endpoint = <&vin7csi20>;
> + };
> + };
> + };
> + };
> +
> +/* Board properties */
Don't split the example. This is source convention which is independent
of the binding.
> +
> + &csi20 {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
Missing #address-cells and #size-cells.
> + csi20_in: endpoint@0 {
> + clock-lanes = <0>;
> + data-lanes = <1>;
> + remote-endpoint = <&adv7482_txb>;
> + };
> + };
> + };
> + };
> --
> 2.13.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-07-24 17:47 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-17 17:03 [PATCH v8 0/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 support Niklas Söderlund
2017-07-17 17:03 ` Niklas Söderlund
[not found] ` <20170717170356.25568-1-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2017-07-17 17:03 ` [PATCH v8 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation Niklas Söderlund
2017-07-17 17:03 ` Niklas Söderlund
[not found] ` <20170717170356.25568-2-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2017-07-24 17:46 ` Rob Herring
2017-07-24 17:46 ` Rob Herring
2017-07-24 17:46 ` Rob Herring
2017-07-17 17:03 ` [PATCH v8 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver Niklas Söderlund
2017-07-17 17:03 ` Niklas Söderlund
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.