[PATCH net-next v2 00/11] net: dsa: rework EEE support

[PATCH net-next v2 00/11] net: dsa: rework EEE support

[Vivien Didelot]

EEE implies configuring the port's PHY and MAC of both ends of the wire.

The current EEE support in DSA mixes PHY and MAC configuration, which is
bad because PHYs must be configured through a proper PHY driver. The DSA
switch operations for EEE are only meant for configuring the port's MAC,
which are integrated in the Ethernet switch device.

This patchset fixes the EEE support in qca8k driver, makes the DSA layer
call phy_init_eee for all drivers, and remove the EEE support from the
mv88e6xxx driver since the Marvell PHY driver should be enough for it.

Changes in v2:
 - make PHY device and DSA EEE ops mandatory for slave EEE operations.
 - simply return 0 in drivers which don't need to do anything to
   configure the port' MAC. Subsequent PHY calls will be enough.

Vivien Didelot (11):
  net: dsa: PHY device is mandatory for EEE
  net: dsa: qca8k: fix EEE init
  net: dsa: qca8k: enable EEE once
  net: dsa: qca8k: do not cache unneeded EEE fields
  net: dsa: qca8k: empty qca8k_get_eee
  net: dsa: bcm_sf2: remove unneeded supported flags
  net: dsa: mv88e6xxx: call phy_init_eee
  net: dsa: call phy_init_eee in DSA layer
  net: dsa: remove PHY device argument from .set_eee
  net: dsa: mv88e6xxx: remove EEE support
  net: dsa: rename switch EEE ops

 drivers/net/dsa/bcm_sf2.c        | 26 +++--------
 drivers/net/dsa/mv88e6xxx/chip.c | 86 +++++------------------------------
 drivers/net/dsa/mv88e6xxx/chip.h |  6 ---
 drivers/net/dsa/mv88e6xxx/phy.c  | 96 ----------------------------------------
 drivers/net/dsa/mv88e6xxx/phy.h  | 22 ---------
 drivers/net/dsa/mv88e6xxx/port.c | 17 -------
 drivers/net/dsa/mv88e6xxx/port.h |  3 --
 drivers/net/dsa/qca8k.c          | 68 ++++------------------------
 drivers/net/dsa/qca8k.h          |  1 -
 include/net/dsa.h                | 11 +++--
 net/dsa/slave.c                  | 30 ++++++++-----
 11 files changed, 49 insertions(+), 317 deletions(-)

-- 
2.13.3

[PATCH net-next v2 01/11] net: dsa: PHY device is mandatory for EEE

[Vivien Didelot]

The port's PHY and MAC are both implied in EEE. The current code does
not call the PHY operations if the related device is NULL. Change that
by returning -ENODEV if there's no PHY device attached to the interface.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 net/dsa/slave.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 9507bd38cf04..7df55d597740 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -648,6 +648,10 @@ static int dsa_slave_set_eee(struct net_device *dev, struct ethtool_eee *e)
 	struct dsa_switch *ds = p->dp->ds;
 	int ret;
 
+	/* Port's PHY and MAC both need to be EEE capable */
+	if (!p->phy)
+		return -ENODEV;
+
 	if (!ds->ops->set_eee)
 		return -EOPNOTSUPP;
 
@@ -655,10 +659,7 @@ static int dsa_slave_set_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (ret)
 		return ret;
 
-	if (p->phy)
-		ret = phy_ethtool_set_eee(p->phy, e);
-
-	return ret;
+	return phy_ethtool_set_eee(p->phy, e);
 }
 
 static int dsa_slave_get_eee(struct net_device *dev, struct ethtool_eee *e)
@@ -667,6 +668,10 @@ static int dsa_slave_get_eee(struct net_device *dev, struct ethtool_eee *e)
 	struct dsa_switch *ds = p->dp->ds;
 	int ret;
 
+	/* Port's PHY and MAC both need to be EEE capable */
+	if (!p->phy)
+		return -ENODEV;
+
 	if (!ds->ops->get_eee)
 		return -EOPNOTSUPP;
 
@@ -674,10 +679,7 @@ static int dsa_slave_get_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (ret)
 		return ret;
 
-	if (p->phy)
-		ret = phy_ethtool_get_eee(p->phy, e);
-
-	return ret;
+	return phy_ethtool_get_eee(p->phy, e);
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-- 
2.13.3

[PATCH net-next v2 02/11] net: dsa: qca8k: fix EEE init

[Vivien Didelot]

The qca8k obviously copied code from the sf2 driver as how to set EEE:

    if (e->eee_enabled) {
        p->eee_enabled = qca8k_eee_init(ds, port, phydev);
        if (!p->eee_enabled)
            ret = -EOPNOTSUPP;
    }

But it did not use the same logic for the EEE init routine, which is
"Returns 0 if EEE was not enabled, or 1 otherwise". This results in
returning -EOPNOTSUPP on success and caching EEE enabled on failure.

This patch fixes the returned value of qca8k_eee_init.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/qca8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index b3bee7eab45f..e076ab23d4df 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -666,11 +666,11 @@ qca8k_eee_init(struct dsa_switch *ds, int port,
 
 	ret = phy_init_eee(phy, 0);
 	if (ret)
-		return ret;
+		return 0;
 
 	qca8k_eee_enable_set(ds, port, true);
 
-	return 0;
+	return 1;
 }
 
 static int
-- 
2.13.3

[PATCH net-next v2 03/11] net: dsa: qca8k: enable EEE once

[Vivien Didelot]

If EEE is queried enabled, qca8k_set_eee calls qca8k_eee_enable_set
twice (because it is already called in qca8k_eee_init). Fix that.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/qca8k.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index e076ab23d4df..9d6b5d2f7a4a 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -684,12 +684,13 @@ qca8k_set_eee(struct dsa_switch *ds, int port,
 
 	p->eee_enabled = e->eee_enabled;
 
-	if (e->eee_enabled) {
+	if (!p->eee_enabled) {
+		qca8k_eee_enable_set(ds, port, false);
+	} else {
 		p->eee_enabled = qca8k_eee_init(ds, port, phydev);
 		if (!p->eee_enabled)
 			ret = -EOPNOTSUPP;
 	}
-	qca8k_eee_enable_set(ds, port, p->eee_enabled);
 
 	return ret;
 }
-- 
2.13.3

[PATCH net-next v2 04/11] net: dsa: qca8k: do not cache unneeded EEE fields

[Vivien Didelot]

The qca8k driver is currently caching a bitfield of the supported member
of a ethtool_eee private structure, which is unused.

Only the eee_enabled field of the private ethtool_eee copy is updated,
thus using p->advertised and p->lp_advertised is also erroneous.

Remove the usage of these private ethtool_eee members and only rely on
phy_ethtool_get_eee to assign the eee_active member.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/qca8k.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 9d6b5d2f7a4a..c316c55aabc6 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -658,12 +658,8 @@ static int
 qca8k_eee_init(struct dsa_switch *ds, int port,
 	       struct phy_device *phy)
 {
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
 	int ret;
 
-	p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full);
-
 	ret = phy_init_eee(phy, 0);
 	if (ret)
 		return 0;
@@ -705,12 +701,7 @@ qca8k_get_eee(struct dsa_switch *ds, int port,
 	int ret;
 
 	ret = phy_ethtool_get_eee(netdev->phydev, p);
-	if (!ret)
-		e->eee_active =
-			!!(p->supported & p->advertised & p->lp_advertised);
-	else
-		e->eee_active = 0;
-
+	e->eee_active = p->eee_active;
 	e->eee_enabled = p->eee_enabled;
 
 	return ret;
-- 
2.13.3

[PATCH net-next v2 05/11] net: dsa: qca8k: empty qca8k_get_eee

[Vivien Didelot]

phy_ethtool_get_eee is already called by the DSA layer, thus remove the
duplicated call in the qca8k driver.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/qca8k.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index c316c55aabc6..8cd4634c6985 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -695,16 +695,8 @@ static int
 qca8k_get_eee(struct dsa_switch *ds, int port,
 	      struct ethtool_eee *e)
 {
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
-	struct net_device *netdev = ds->ports[port].netdev;
-	int ret;
-
-	ret = phy_ethtool_get_eee(netdev->phydev, p);
-	e->eee_active = p->eee_active;
-	e->eee_enabled = p->eee_enabled;
-
-	return ret;
+	/* Nothing to do on the port's MAC */
+	return 0;
 }
 
 static void
-- 
2.13.3

[PATCH net-next v2 06/11] net: dsa: bcm_sf2: remove unneeded supported flags

[Vivien Didelot]

The SF2 driver is masking the supported bitfield of its private copy of
the ports' ethtool_eee structures. It is used nowhere, thus remove it.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/bcm_sf2.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 648f91b58d1e..aef475f1ce06 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -327,12 +327,8 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
 static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
 			    struct phy_device *phy)
 {
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
 	int ret;
 
-	p->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full);
-
 	ret = phy_init_eee(phy, 0);
 	if (ret)
 		return 0;
-- 
2.13.3

[PATCH net-next v2 07/11] net: dsa: mv88e6xxx: call phy_init_eee

[Vivien Didelot]

It is safer to init the EEE before the DSA layer call
phy_ethtool_set_eee, as sf2 and qca8k are doing.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 647d5d45c1d6..b531d4a3bab5 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -855,6 +855,12 @@ static int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
 	struct mv88e6xxx_chip *chip = ds->priv;
 	int err;
 
+	if (e->eee_enabled) {
+		err = phy_init_eee(phydev, 0);
+		if (err)
+			return err;
+	}
+
 	mutex_lock(&chip->reg_lock);
 	err = mv88e6xxx_energy_detect_write(chip, port, e);
 	mutex_unlock(&chip->reg_lock);
-- 
2.13.3

[PATCH net-next v2 08/11] net: dsa: call phy_init_eee in DSA layer

[Vivien Didelot]

All DSA drivers are calling phy_init_eee if eee_enabled is true.

Move up this statement in the DSA layer to simplify the DSA drivers.
qca8k does not require to cache the ethtool_eee structures from now on.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/bcm_sf2.c        |  9 +--------
 drivers/net/dsa/mv88e6xxx/chip.c |  6 ------
 drivers/net/dsa/qca8k.c          | 31 ++-----------------------------
 drivers/net/dsa/qca8k.h          |  1 -
 net/dsa/slave.c                  |  6 ++++++
 5 files changed, 9 insertions(+), 44 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index aef475f1ce06..9d10aac8f241 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -360,14 +360,7 @@ static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
 	struct ethtool_eee *p = &priv->port_sts[port].eee;
 
 	p->eee_enabled = e->eee_enabled;
-
-	if (!p->eee_enabled) {
-		bcm_sf2_eee_enable_set(ds, port, false);
-	} else {
-		p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
-		if (!p->eee_enabled)
-			return -EOPNOTSUPP;
-	}
+	bcm_sf2_eee_enable_set(ds, port, e->eee_enabled);
 
 	return 0;
 }
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index b531d4a3bab5..647d5d45c1d6 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -855,12 +855,6 @@ static int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
 	struct mv88e6xxx_chip *chip = ds->priv;
 	int err;
 
-	if (e->eee_enabled) {
-		err = phy_init_eee(phydev, 0);
-		if (err)
-			return err;
-	}
-
 	mutex_lock(&chip->reg_lock);
 	err = mv88e6xxx_energy_detect_write(chip, port, e);
 	mutex_unlock(&chip->reg_lock);
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 8cd4634c6985..bfe0172ae6cc 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -655,40 +655,13 @@ qca8k_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
 }
 
 static int
-qca8k_eee_init(struct dsa_switch *ds, int port,
-	       struct phy_device *phy)
-{
-	int ret;
-
-	ret = phy_init_eee(phy, 0);
-	if (ret)
-		return 0;
-
-	qca8k_eee_enable_set(ds, port, true);
-
-	return 1;
-}
-
-static int
 qca8k_set_eee(struct dsa_switch *ds, int port,
 	      struct phy_device *phydev,
 	      struct ethtool_eee *e)
 {
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
-	int ret = 0;
+	qca8k_eee_enable_set(ds, port, e->eee_enabled);
 
-	p->eee_enabled = e->eee_enabled;
-
-	if (!p->eee_enabled) {
-		qca8k_eee_enable_set(ds, port, false);
-	} else {
-		p->eee_enabled = qca8k_eee_init(ds, port, phydev);
-		if (!p->eee_enabled)
-			ret = -EOPNOTSUPP;
-	}
-
-	return ret;
+	return 0;
 }
 
 static int
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 1ed4fac6cd6d..1cf8a920d4ff 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -156,7 +156,6 @@ enum qca8k_fdb_cmd {
 };
 
 struct ar8xxx_port_status {
-	struct ethtool_eee eee;
 	int enabled;
 };
 
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 7df55d597740..ad5caaf384d7 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -659,6 +659,12 @@ static int dsa_slave_set_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (ret)
 		return ret;
 
+	if (e->eee_enabled) {
+		ret = phy_init_eee(p->phy, 0);
+		if (ret)
+			return ret;
+	}
+
 	return phy_ethtool_set_eee(p->phy, e);
 }
 
-- 
2.13.3

[PATCH net-next v2 09/11] net: dsa: remove PHY device argument from .set_eee

[Vivien Didelot]

The DSA switch operations for EEE are only meant to configure a port's
MAC EEE settings. The port's PHY EEE settings are accessed by the DSA
layer and must be made available via a proper PHY driver.

In order to reduce this confusion, remove the phy_device argument from
the .set_eee operation.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/bcm_sf2.c        |  1 -
 drivers/net/dsa/mv88e6xxx/chip.c |  2 +-
 drivers/net/dsa/qca8k.c          | 14 +++-----------
 include/net/dsa.h                |  1 -
 net/dsa/slave.c                  |  2 +-
 5 files changed, 5 insertions(+), 15 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 9d10aac8f241..ce886345d8d2 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -353,7 +353,6 @@ static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port,
 }
 
 static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
-			      struct phy_device *phydev,
 			      struct ethtool_eee *e)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 647d5d45c1d6..aaa96487f21f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -850,7 +850,7 @@ static int mv88e6xxx_get_eee(struct dsa_switch *ds, int port,
 }
 
 static int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
-			     struct phy_device *phydev, struct ethtool_eee *e)
+			     struct ethtool_eee *e)
 {
 	struct mv88e6xxx_chip *chip = ds->priv;
 	int err;
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index bfe0172ae6cc..e209e229ed4c 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -637,8 +637,8 @@ qca8k_get_sset_count(struct dsa_switch *ds)
 	return ARRAY_SIZE(ar8327_mib);
 }
 
-static void
-qca8k_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+static int
+qca8k_set_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
 {
 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 	u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
@@ -646,20 +646,12 @@ qca8k_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
 
 	mutex_lock(&priv->reg_mutex);
 	reg = qca8k_read(priv, QCA8K_REG_EEE_CTRL);
-	if (enable)
+	if (eee->eee_enabled)
 		reg |= lpi_en;
 	else
 		reg &= ~lpi_en;
 	qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
 	mutex_unlock(&priv->reg_mutex);
-}
-
-static int
-qca8k_set_eee(struct dsa_switch *ds, int port,
-	      struct phy_device *phydev,
-	      struct ethtool_eee *e)
-{
-	qca8k_eee_enable_set(ds, port, e->eee_enabled);
 
 	return 0;
 }
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 88da272d20d0..ce46db323394 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -335,7 +335,6 @@ struct dsa_switch_ops {
 	 * EEE setttings
 	 */
 	int	(*set_eee)(struct dsa_switch *ds, int port,
-			   struct phy_device *phydev,
 			   struct ethtool_eee *e);
 	int	(*get_eee)(struct dsa_switch *ds, int port,
 			   struct ethtool_eee *e);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index ad5caaf384d7..9ddc584e70b0 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -655,7 +655,7 @@ static int dsa_slave_set_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (!ds->ops->set_eee)
 		return -EOPNOTSUPP;
 
-	ret = ds->ops->set_eee(ds, p->dp->index, p->phy, e);
+	ret = ds->ops->set_eee(ds, p->dp->index, e);
 	if (ret)
 		return ret;
 
-- 
2.13.3

[PATCH net-next v2 10/11] net: dsa: mv88e6xxx: remove EEE support

[Vivien Didelot]

The PHY's EEE settings are already accessed by the DSA layer through the
Marvell PHY driver and there is nothing to be done for switch's MACs.

Remove all EEE support from the mv88e6xxx driver and simply return 0
from the EEE ops.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 74 ++-----------------------------
 drivers/net/dsa/mv88e6xxx/chip.h |  6 ---
 drivers/net/dsa/mv88e6xxx/phy.c  | 96 ----------------------------------------
 drivers/net/dsa/mv88e6xxx/phy.h  | 22 ---------
 drivers/net/dsa/mv88e6xxx/port.c | 17 -------
 drivers/net/dsa/mv88e6xxx/port.h |  3 --
 6 files changed, 4 insertions(+), 214 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index aaa96487f21f..aa0c5493fb9d 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -810,56 +810,18 @@ static void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
 	mutex_unlock(&chip->reg_lock);
 }
 
-static int mv88e6xxx_energy_detect_read(struct mv88e6xxx_chip *chip, int port,
-					struct ethtool_eee *eee)
-{
-	int err;
-
-	if (!chip->info->ops->phy_energy_detect_read)
-		return -EOPNOTSUPP;
-
-	/* assign eee->eee_enabled and eee->tx_lpi_enabled */
-	err = chip->info->ops->phy_energy_detect_read(chip, port, eee);
-	if (err)
-		return err;
-
-	/* assign eee->eee_active */
-	return mv88e6xxx_port_status_eee(chip, port, eee);
-}
-
-static int mv88e6xxx_energy_detect_write(struct mv88e6xxx_chip *chip, int port,
-					 struct ethtool_eee *eee)
-{
-	if (!chip->info->ops->phy_energy_detect_write)
-		return -EOPNOTSUPP;
-
-	return chip->info->ops->phy_energy_detect_write(chip, port, eee);
-}
-
 static int mv88e6xxx_get_eee(struct dsa_switch *ds, int port,
 			     struct ethtool_eee *e)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
-	int err;
-
-	mutex_lock(&chip->reg_lock);
-	err = mv88e6xxx_energy_detect_read(chip, port, e);
-	mutex_unlock(&chip->reg_lock);
-
-	return err;
+	/* Nothing to do on the port's MAC */
+	return 0;
 }
 
 static int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
 			     struct ethtool_eee *e)
 {
-	struct mv88e6xxx_chip *chip = ds->priv;
-	int err;
-
-	mutex_lock(&chip->reg_lock);
-	err = mv88e6xxx_energy_detect_write(chip, port, e);
-	mutex_unlock(&chip->reg_lock);
-
-	return err;
+	/* Nothing to do on the port's MAC */
+	return 0;
 }
 
 static u16 mv88e6xxx_port_vlan(struct mv88e6xxx_chip *chip, int dev, int port)
@@ -2521,8 +2483,6 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
@@ -2648,8 +2608,6 @@ static const struct mv88e6xxx_ops mv88e6172_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
@@ -2719,8 +2677,6 @@ static const struct mv88e6xxx_ops mv88e6176_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
@@ -2784,8 +2740,6 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6390_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6390_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
@@ -2821,8 +2775,6 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6390_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6390_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
@@ -2858,8 +2810,6 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6390_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6390_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
@@ -2895,8 +2845,6 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
@@ -2933,8 +2881,6 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6390_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6390_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
@@ -2971,8 +2917,6 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_speed = mv88e6185_port_set_speed,
@@ -3006,8 +2950,6 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_speed = mv88e6185_port_set_speed,
@@ -3039,8 +2981,6 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
@@ -3142,8 +3082,6 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6352_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6352_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6352_port_set_rgmii_delay,
@@ -3180,8 +3118,6 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6390_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6390_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
@@ -3220,8 +3156,6 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
 	.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
 	.phy_read = mv88e6xxx_g2_smi_phy_read,
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
-	.phy_energy_detect_read = mv88e6390_phy_energy_detect_read,
-	.phy_energy_detect_write = mv88e6390_phy_energy_detect_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 9111e1316250..334f6f7544ba 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -239,12 +239,6 @@ struct mv88e6xxx_ops {
 			 struct mii_bus *bus,
 			 int addr, int reg, u16 val);
 
-	/* Copper Energy Detect operations */
-	int (*phy_energy_detect_read)(struct mv88e6xxx_chip *chip, int phy,
-				      struct ethtool_eee *eee);
-	int (*phy_energy_detect_write)(struct mv88e6xxx_chip *chip, int phy,
-				       struct ethtool_eee *eee);
-
 	/* Priority Override Table operations */
 	int (*pot_clear)(struct mv88e6xxx_chip *chip);
 
diff --git a/drivers/net/dsa/mv88e6xxx/phy.c b/drivers/net/dsa/mv88e6xxx/phy.c
index 317ae89cfa68..436668bd50dc 100644
--- a/drivers/net/dsa/mv88e6xxx/phy.c
+++ b/drivers/net/dsa/mv88e6xxx/phy.c
@@ -246,99 +246,3 @@ int mv88e6xxx_phy_setup(struct mv88e6xxx_chip *chip)
 {
 	return mv88e6xxx_phy_ppu_enable(chip);
 }
-
-/* Page 0, Register 16: Copper Specific Control Register 1 */
-
-int mv88e6352_phy_energy_detect_read(struct mv88e6xxx_chip *chip, int phy,
-				     struct ethtool_eee *eee)
-{
-	u16 val;
-	int err;
-
-	err = mv88e6xxx_phy_read(chip, phy, MV88E6XXX_PHY_CSCTL1, &val);
-	if (err)
-		return err;
-
-	val &= MV88E6352_PHY_CSCTL1_ENERGY_DETECT_MASK;
-
-	eee->eee_enabled = false;
-	eee->tx_lpi_enabled = false;
-
-	switch (val) {
-	case MV88E6352_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP:
-		eee->tx_lpi_enabled = true;
-		/* fall through... */
-	case MV88E6352_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV:
-		eee->eee_enabled = true;
-	}
-
-	return 0;
-}
-
-int mv88e6352_phy_energy_detect_write(struct mv88e6xxx_chip *chip, int phy,
-				      struct ethtool_eee *eee)
-{
-	u16 val;
-	int err;
-
-	err = mv88e6xxx_phy_read(chip, phy, MV88E6XXX_PHY_CSCTL1, &val);
-	if (err)
-		return err;
-
-	val &= ~MV88E6352_PHY_CSCTL1_ENERGY_DETECT_MASK;
-
-	if (eee->eee_enabled)
-		val |= MV88E6352_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV;
-	if (eee->tx_lpi_enabled)
-		val |= MV88E6352_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP;
-
-	return mv88e6xxx_phy_write(chip, phy, MV88E6XXX_PHY_CSCTL1, val);
-}
-
-int mv88e6390_phy_energy_detect_read(struct mv88e6xxx_chip *chip, int phy,
-				     struct ethtool_eee *eee)
-{
-	u16 val;
-	int err;
-
-	err = mv88e6xxx_phy_read(chip, phy, MV88E6XXX_PHY_CSCTL1, &val);
-	if (err)
-		return err;
-
-	val &= MV88E6390_PHY_CSCTL1_ENERGY_DETECT_MASK;
-
-	eee->eee_enabled = false;
-	eee->tx_lpi_enabled = false;
-
-	switch (val) {
-	case MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP_AUTO:
-	case MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP_SW:
-		eee->tx_lpi_enabled = true;
-		/* fall through... */
-	case MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV_AUTO:
-	case MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV_SW:
-		eee->eee_enabled = true;
-	}
-
-	return 0;
-}
-
-int mv88e6390_phy_energy_detect_write(struct mv88e6xxx_chip *chip, int phy,
-				      struct ethtool_eee *eee)
-{
-	u16 val;
-	int err;
-
-	err = mv88e6xxx_phy_read(chip, phy, MV88E6XXX_PHY_CSCTL1, &val);
-	if (err)
-		return err;
-
-	val &= ~MV88E6390_PHY_CSCTL1_ENERGY_DETECT_MASK;
-
-	if (eee->eee_enabled)
-		val |= MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV_AUTO;
-	if (eee->tx_lpi_enabled)
-		val |= MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP_AUTO;
-
-	return mv88e6xxx_phy_write(chip, phy, MV88E6XXX_PHY_CSCTL1, val);
-}
diff --git a/drivers/net/dsa/mv88e6xxx/phy.h b/drivers/net/dsa/mv88e6xxx/phy.h
index 988802799ad6..556b74a0502a 100644
--- a/drivers/net/dsa/mv88e6xxx/phy.h
+++ b/drivers/net/dsa/mv88e6xxx/phy.h
@@ -17,19 +17,6 @@
 #define MV88E6XXX_PHY_PAGE		0x16
 #define MV88E6XXX_PHY_PAGE_COPPER	0x00
 
-/* Page 0, Register 16: Copper Specific Control Register 1 */
-#define MV88E6XXX_PHY_CSCTL1					16
-#define MV88E6352_PHY_CSCTL1_ENERGY_DETECT_MASK			0x0300
-#define MV88E6352_PHY_CSCTL1_ENERGY_DETECT_OFF_MASK		0x0100 /* 0x */
-#define MV88E6352_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV		0x0200
-#define MV88E6352_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP		0x0300
-#define MV88E6390_PHY_CSCTL1_ENERGY_DETECT_MASK			0x0380
-#define MV88E6390_PHY_CSCTL1_ENERGY_DETECT_OFF_MASK		0x0180 /* 0xx */
-#define MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV_AUTO	0x0200
-#define MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_RCV_SW		0x0280
-#define MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP_AUTO	0x0300
-#define MV88E6390_PHY_CSCTL1_ENERGY_DETECT_SENSE_NLP_SW		0x0380
-
 /* PHY Registers accesses implementations */
 int mv88e6165_phy_read(struct mv88e6xxx_chip *chip, struct mii_bus *bus,
 		       int addr, int reg, u16 *val);
@@ -53,13 +40,4 @@ void mv88e6xxx_phy_init(struct mv88e6xxx_chip *chip);
 void mv88e6xxx_phy_destroy(struct mv88e6xxx_chip *chip);
 int mv88e6xxx_phy_setup(struct mv88e6xxx_chip *chip);
 
-int mv88e6352_phy_energy_detect_read(struct mv88e6xxx_chip *chip, int phy,
-				     struct ethtool_eee *eee);
-int mv88e6352_phy_energy_detect_write(struct mv88e6xxx_chip *chip, int phy,
-				      struct ethtool_eee *eee);
-int mv88e6390_phy_energy_detect_read(struct mv88e6xxx_chip *chip, int phy,
-				     struct ethtool_eee *eee);
-int mv88e6390_phy_energy_detect_write(struct mv88e6xxx_chip *chip, int phy,
-				      struct ethtool_eee *eee);
-
 #endif /*_MV88E6XXX_PHY_H */
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index 2837a9128557..a7801f6668a5 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -35,23 +35,6 @@ int mv88e6xxx_port_write(struct mv88e6xxx_chip *chip, int port, int reg,
 	return mv88e6xxx_write(chip, addr, reg, val);
 }
 
-/* Offset 0x00: Port Status Register */
-
-int mv88e6xxx_port_status_eee(struct mv88e6xxx_chip *chip, int port,
-			      struct ethtool_eee *eee)
-{
-	u16 val;
-	int err;
-
-	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &val);
-	if (err)
-		return err;
-
-	eee->eee_active = !!(val & MV88E6352_PORT_STS_EEE);
-
-	return 0;
-}
-
 /* Offset 0x01: MAC (or PCS or Physical) Control Register
  *
  * Link, Duplex and Flow Control have one force bit, one value bit.
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 6fcab309cd85..b16d5f0e6e9c 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -241,9 +241,6 @@ int mv88e6xxx_port_read(struct mv88e6xxx_chip *chip, int port, int reg,
 int mv88e6xxx_port_write(struct mv88e6xxx_chip *chip, int port, int reg,
 			 u16 val);
 
-int mv88e6xxx_port_status_eee(struct mv88e6xxx_chip *chip, int port,
-			      struct ethtool_eee *eee);
-
 int mv88e6352_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
 				   phy_interface_t mode);
 int mv88e6390_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
-- 
2.13.3

[PATCH net-next v2 11/11] net: dsa: rename switch EEE ops

[Vivien Didelot]

To avoid confusion with the PHY EEE settings, rename the .set_eee and
.get_eee ops to respectively .set_mac_eee and .get_mac_eee.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/bcm_sf2.c        | 12 ++++++------
 drivers/net/dsa/mv88e6xxx/chip.c | 12 ++++++------
 drivers/net/dsa/qca8k.c          |  9 ++++-----
 include/net/dsa.h                | 10 +++++-----
 net/dsa/slave.c                  |  8 ++++----
 5 files changed, 25 insertions(+), 26 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index ce886345d8d2..6bbfa6ea1efb 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -338,8 +338,8 @@ static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
 	return 1;
 }
 
-static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port,
-			      struct ethtool_eee *e)
+static int bcm_sf2_sw_get_mac_eee(struct dsa_switch *ds, int port,
+				  struct ethtool_eee *e)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	struct ethtool_eee *p = &priv->port_sts[port].eee;
@@ -352,8 +352,8 @@ static int bcm_sf2_sw_get_eee(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static int bcm_sf2_sw_set_eee(struct dsa_switch *ds, int port,
-			      struct ethtool_eee *e)
+static int bcm_sf2_sw_set_mac_eee(struct dsa_switch *ds, int port,
+				  struct ethtool_eee *e)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	struct ethtool_eee *p = &priv->port_sts[port].eee;
@@ -1011,8 +1011,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
 	.set_wol		= bcm_sf2_sw_set_wol,
 	.port_enable		= bcm_sf2_port_setup,
 	.port_disable		= bcm_sf2_port_disable,
-	.get_eee		= bcm_sf2_sw_get_eee,
-	.set_eee		= bcm_sf2_sw_set_eee,
+	.get_mac_eee		= bcm_sf2_sw_get_mac_eee,
+	.set_mac_eee		= bcm_sf2_sw_set_mac_eee,
 	.port_bridge_join	= b53_br_join,
 	.port_bridge_leave	= b53_br_leave,
 	.port_stp_state_set	= b53_br_set_stp_state,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index aa0c5493fb9d..521738c4cd17 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -810,15 +810,15 @@ static void mv88e6xxx_get_regs(struct dsa_switch *ds, int port,
 	mutex_unlock(&chip->reg_lock);
 }
 
-static int mv88e6xxx_get_eee(struct dsa_switch *ds, int port,
-			     struct ethtool_eee *e)
+static int mv88e6xxx_get_mac_eee(struct dsa_switch *ds, int port,
+				 struct ethtool_eee *e)
 {
 	/* Nothing to do on the port's MAC */
 	return 0;
 }
 
-static int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
-			     struct ethtool_eee *e)
+static int mv88e6xxx_set_mac_eee(struct dsa_switch *ds, int port,
+				 struct ethtool_eee *e)
 {
 	/* Nothing to do on the port's MAC */
 	return 0;
@@ -3890,8 +3890,8 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
 	.get_sset_count		= mv88e6xxx_get_sset_count,
 	.port_enable		= mv88e6xxx_port_enable,
 	.port_disable		= mv88e6xxx_port_disable,
-	.set_eee		= mv88e6xxx_set_eee,
-	.get_eee		= mv88e6xxx_get_eee,
+	.get_mac_eee		= mv88e6xxx_get_mac_eee,
+	.set_mac_eee		= mv88e6xxx_set_mac_eee,
 	.get_eeprom_len		= mv88e6xxx_get_eeprom_len,
 	.get_eeprom		= mv88e6xxx_get_eeprom,
 	.set_eeprom		= mv88e6xxx_set_eeprom,
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index e209e229ed4c..36c169b0c705 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -638,7 +638,7 @@ qca8k_get_sset_count(struct dsa_switch *ds)
 }
 
 static int
-qca8k_set_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
+qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
 {
 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
 	u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
@@ -657,8 +657,7 @@ qca8k_set_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
 }
 
 static int
-qca8k_get_eee(struct dsa_switch *ds, int port,
-	      struct ethtool_eee *e)
+qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
 {
 	/* Nothing to do on the port's MAC */
 	return 0;
@@ -863,8 +862,8 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
 	.phy_write		= qca8k_phy_write,
 	.get_ethtool_stats	= qca8k_get_ethtool_stats,
 	.get_sset_count		= qca8k_get_sset_count,
-	.get_eee		= qca8k_get_eee,
-	.set_eee		= qca8k_set_eee,
+	.get_mac_eee		= qca8k_get_mac_eee,
+	.set_mac_eee		= qca8k_set_mac_eee,
 	.port_enable		= qca8k_port_enable,
 	.port_disable		= qca8k_port_disable,
 	.port_stp_state_set	= qca8k_port_stp_state_set,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index ce46db323394..0b1a0622b33c 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -332,12 +332,12 @@ struct dsa_switch_ops {
 				struct phy_device *phy);
 
 	/*
-	 * EEE setttings
+	 * Port's MAC EEE settings
 	 */
-	int	(*set_eee)(struct dsa_switch *ds, int port,
-			   struct ethtool_eee *e);
-	int	(*get_eee)(struct dsa_switch *ds, int port,
-			   struct ethtool_eee *e);
+	int	(*set_mac_eee)(struct dsa_switch *ds, int port,
+			       struct ethtool_eee *e);
+	int	(*get_mac_eee)(struct dsa_switch *ds, int port,
+			       struct ethtool_eee *e);
 
 	/* EEPROM access */
 	int	(*get_eeprom_len)(struct dsa_switch *ds);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 9ddc584e70b0..cc4bad3dadb4 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -652,10 +652,10 @@ static int dsa_slave_set_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (!p->phy)
 		return -ENODEV;
 
-	if (!ds->ops->set_eee)
+	if (!ds->ops->set_mac_eee)
 		return -EOPNOTSUPP;
 
-	ret = ds->ops->set_eee(ds, p->dp->index, e);
+	ret = ds->ops->set_mac_eee(ds, p->dp->index, e);
 	if (ret)
 		return ret;
 
@@ -678,10 +678,10 @@ static int dsa_slave_get_eee(struct net_device *dev, struct ethtool_eee *e)
 	if (!p->phy)
 		return -ENODEV;
 
-	if (!ds->ops->get_eee)
+	if (!ds->ops->get_mac_eee)
 		return -EOPNOTSUPP;
 
-	ret = ds->ops->get_eee(ds, p->dp->index, e);
+	ret = ds->ops->get_mac_eee(ds, p->dp->index, e);
 	if (ret)
 		return ret;
 
-- 
2.13.3

Re: [PATCH net-next v2 01/11] net: dsa: PHY device is mandatory for EEE

[Andrew Lunn]

On Tue, Aug 01, 2017 at 04:32:31PM -0400, Vivien Didelot wrote:
> The port's PHY and MAC are both implied in EEE. The current code does
> not call the PHY operations if the related device is NULL. Change that
> by returning -ENODEV if there's no PHY device attached to the interface.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 07/11] net: dsa: mv88e6xxx: call phy_init_eee

[Andrew Lunn]

On Tue, Aug 01, 2017 at 04:32:37PM -0400, Vivien Didelot wrote:
> It is safer to init the EEE before the DSA layer call
> phy_ethtool_set_eee, as sf2 and qca8k are doing.

I can understand making all the drivers do the same thing, but the
next patch deletes this change, making is pointless.

My preference would be to drop this. But it is not a strong preference.

  Andrew

Re: [PATCH net-next v2 08/11] net: dsa: call phy_init_eee in DSA layer

[Andrew Lunn]

On Tue, Aug 01, 2017 at 04:32:38PM -0400, Vivien Didelot wrote:
> All DSA drivers are calling phy_init_eee if eee_enabled is true.
> 
> Move up this statement in the DSA layer to simplify the DSA drivers.
> qca8k does not require to cache the ethtool_eee structures from now on.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 09/11] net: dsa: remove PHY device argument from .set_eee

[Andrew Lunn]

On Tue, Aug 01, 2017 at 04:32:39PM -0400, Vivien Didelot wrote:
> The DSA switch operations for EEE are only meant to configure a port's
> MAC EEE settings. The port's PHY EEE settings are accessed by the DSA
> layer and must be made available via a proper PHY driver.
> 
> In order to reduce this confusion, remove the phy_device argument from
> the .set_eee operation.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 10/11] net: dsa: mv88e6xxx: remove EEE support

[Andrew Lunn]

On Tue, Aug 01, 2017 at 04:32:40PM -0400, Vivien Didelot wrote:
> The PHY's EEE settings are already accessed by the DSA layer through the
> Marvell PHY driver and there is nothing to be done for switch's MACs.
> 
> Remove all EEE support from the mv88e6xxx driver and simply return 0
> from the EEE ops.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 11/11] net: dsa: rename switch EEE ops

[Andrew Lunn]

On Tue, Aug 01, 2017 at 04:32:41PM -0400, Vivien Didelot wrote:
> To avoid confusion with the PHY EEE settings, rename the .set_eee and
> .get_eee ops to respectively .set_mac_eee and .get_mac_eee.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v2 06/11] net: dsa: bcm_sf2: remove unneeded supported flags

[Florian Fainelli]

On 08/01/2017 01:32 PM, Vivien Didelot wrote:
> The SF2 driver is masking the supported bitfield of its private copy of
> the ports' ethtool_eee structures. It is used nowhere, thus remove it.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH net-next v2 01/11] net: dsa: PHY device is mandatory for EEE

[Florian Fainelli]

On 08/01/2017 01:32 PM, Vivien Didelot wrote:
> The port's PHY and MAC are both implied in EEE. The current code does
> not call the PHY operations if the related device is NULL. Change that
> by returning -ENODEV if there's no PHY device attached to the interface.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH net-next v2 00/11] net: dsa: rework EEE support

[David Miller]

From: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Date: Tue,  1 Aug 2017 16:32:30 -0400

> EEE implies configuring the port's PHY and MAC of both ends of the wire.
> 
> The current EEE support in DSA mixes PHY and MAC configuration, which is
> bad because PHYs must be configured through a proper PHY driver. The DSA
> switch operations for EEE are only meant for configuring the port's MAC,
> which are integrated in the Ethernet switch device.
> 
> This patchset fixes the EEE support in qca8k driver, makes the DSA layer
> call phy_init_eee for all drivers, and remove the EEE support from the
> mv88e6xxx driver since the Marvell PHY driver should be enough for it.
> 
> Changes in v2:
>  - make PHY device and DSA EEE ops mandatory for slave EEE operations.
>  - simply return 0 in drivers which don't need to do anything to
>    configure the port' MAC. Subsequent PHY calls will be enough.

Series applied, thanks Vivien.