All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: jsmart2021@gmail.com, Dick Kennedy <dick.kennedy@broadcom.com>,
	James Smart <james.smart@broadcom.com>
Subject: [PATCH v2 08/20] lpfc: Fix duplicate NVME rport entries and namespaces.
Date: Fri,  4 Aug 2017 17:47:19 -0700	[thread overview]
Message-ID: <20170805004731.1335-9-jsmart2021@gmail.com> (raw)
In-Reply-To: <20170805004731.1335-1-jsmart2021@gmail.com>

From: Dick Kennedy <dick.kennedy@broadcom.com>

After lip, the driver sometimes would have two rports for the same
device, allowing the namespaces to be duplicated by nvme.

In lpfc_plogi_confirm_nport() the driver was not swapping the
nrport maintained by the ndlp's undergoing address swapping. This
allowed the 2nd rport to sneak in as it was considered a separate
device.

This patch adds the fixes to Swap the nrport in each ndlp and take
care of the reference counts on the ndlps similar to FCP rports.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 6962e22087c8..fe0dd42b75af 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1527,6 +1527,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	uint8_t  name[sizeof(struct lpfc_name)];
 	uint32_t rc, keepDID = 0, keep_nlp_flag = 0;
 	uint16_t keep_nlp_state;
+	struct lpfc_nvme_rport *keep_nrport = NULL;
 	int  put_node;
 	int  put_rport;
 	unsigned long *active_rrqs_xri_bitmap = NULL;
@@ -1624,6 +1625,10 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	keep_nlp_state = new_ndlp->nlp_state;
 	lpfc_nlp_set_state(vport, new_ndlp, ndlp->nlp_state);
 
+	/* For nvme, swap the nrport. */
+	keep_nrport = new_ndlp->nrport;
+	new_ndlp->nrport = ndlp->nrport;
+
 	/* Move this back to NPR state */
 	if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) {
 		/* The new_ndlp is replacing ndlp totally, so we need
@@ -1646,6 +1651,13 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			}
 			new_ndlp->nlp_type = ndlp->nlp_type;
 		}
+
+		/* Fix up the nvme rport */
+		if (ndlp->nrport) {
+			ndlp->nrport = NULL;
+			lpfc_nlp_put(ndlp);
+		}
+
 		/* We shall actually free the ndlp with both nlp_DID and
 		 * nlp_portname fields equals 0 to avoid any ndlp on the
 		 * nodelist never to be used.
@@ -1690,6 +1702,14 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 			keep_nlp_state = NLP_STE_NPR_NODE;
 		lpfc_nlp_set_state(vport, ndlp, keep_nlp_state);
 
+		/* Previous ndlp no longer active with nvme host transport.
+		 * Remove reference from earlier registration unless the
+		 * nvme host took care of it.
+		 */
+		if (ndlp->nrport)
+			lpfc_nlp_put(ndlp);
+		ndlp->nrport = keep_nrport;
+
 		/* Fix up the rport accordingly */
 		rport = ndlp->rport;
 		if (rport) {
-- 
2.13.1

  parent reply	other threads:[~2017-08-05  0:47 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-05  0:47 [PATCH v2 00/20] lpfc updates for 11.4.0.3 James Smart
2017-08-05  0:47 ` [PATCH v2 01/20] lpfc: Fix plogi collision that causes illegal state transition James Smart
2017-08-07  7:49   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 02/20] lpfc: Fix loop mode target discovery James Smart
2017-08-07  7:55   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 03/20] lpfc: Fix rediscovery on switch blade pull James Smart
2017-08-07  7:56   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 04/20] lpfc: Fix oops when NVME Target is discovered in a nonNVME environment James Smart
2017-08-07  8:00   ` Johannes Thumshirn
2017-08-07 20:34     ` James Smart
2017-08-05  0:47 ` [PATCH v2 05/20] lpfc: convert info messages to standard messages James Smart
2017-08-07  8:00   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 06/20] lpfc: Correct return error codes to align with nvme_fc transport James Smart
2017-08-07  8:07   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 07/20] lpfc: Fix handling of FCP and NVME FC4 types in Pt2Pt topology James Smart
2017-08-07  8:18   ` Johannes Thumshirn
2017-08-05  0:47 ` James Smart [this message]
2017-08-07  8:33   ` [PATCH v2 08/20] lpfc: Fix duplicate NVME rport entries and namespaces Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 09/20] lpfc: Fix crash in lpfc nvmet when fc port is reset James Smart
2017-08-07  8:34   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 10/20] lpfc: Fix NVME PRLI handling during RSCN James Smart
2017-08-07  8:35   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 11/20] lpfc: Correct issues with FAWWN and FDISCs James Smart
2017-08-05  0:47 ` [PATCH v2 12/20] lpfc: Limit amount of work processed in IRQ James Smart
2017-08-07  8:43   ` Johannes Thumshirn
2017-08-07 20:50     ` James Smart
2017-08-05  0:47 ` [PATCH v2 13/20] lpfc: Fix MRQ > 1 context list handling James Smart
2017-08-07  9:02   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 14/20] lpfc: Fix relative offset error on large nvmet target ios James Smart
2017-08-07  9:02   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 15/20] lpfc: Fix nvme target failure after 2nd adapter reset James Smart
2017-08-07  9:05   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 16/20] lpfc: Fix bad sgl reposting " James Smart
2017-08-07  9:06   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 17/20] lpfc: remove console log clutter James Smart
2017-08-07  9:06   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 18/20] lpfc: Add Buffer to Buffer credit recovery support James Smart
2017-08-07  9:08   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 19/20] scsi: lpfc: fix "integer constant too large" error on 32bit archs James Smart
2017-08-07  9:09   ` Johannes Thumshirn
2017-08-05  0:47 ` [PATCH v2 20/20] lpfc: lpfc version bump 11.4.0.3 James Smart
2017-08-07  9:08   ` Johannes Thumshirn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170805004731.1335-9-jsmart2021@gmail.com \
    --to=jsmart2021@gmail.com \
    --cc=dick.kennedy@broadcom.com \
    --cc=james.smart@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.