* [PATCH v2 1/3] reset: uniphier: add audio systems reset control
@ 2017-08-13 9:00 ` Katsuhiro Suzuki
0 siblings, 0 replies; 10+ messages in thread
From: Katsuhiro Suzuki @ 2017-08-13 9:00 UTC (permalink / raw)
To: Philipp Zabel, Masahiro Yamada, linux-arm-kernel
Cc: Masami Hiramatsu, Jassi Brar, linux-kernel, Katsuhiro Suzuki
Add reset lines for audio subsystem (AIO) and
SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
drivers/reset/reset-uniphier.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 954b2c4e6ca7..90c52a96f775 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -93,6 +93,8 @@ static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC, MIO) */
+ UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
+ UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
UNIPHIER_RESET_END,
};
@@ -105,6 +107,8 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */
UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */
UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */
+ UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
+ UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
UNIPHIER_RESET_END,
};
--
2.13.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 1/3] reset: uniphier: add audio systems reset control
@ 2017-08-13 9:00 ` Katsuhiro Suzuki
0 siblings, 0 replies; 10+ messages in thread
From: Katsuhiro Suzuki @ 2017-08-13 9:00 UTC (permalink / raw)
To: linux-arm-kernel
Add reset lines for audio subsystem (AIO) and
SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
drivers/reset/reset-uniphier.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 954b2c4e6ca7..90c52a96f775 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -93,6 +93,8 @@ static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC, MIO) */
+ UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
+ UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
UNIPHIER_RESET_END,
};
@@ -105,6 +107,8 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */
UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */
UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */
+ UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
+ UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
UNIPHIER_RESET_END,
};
--
2.13.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/3] reset: uniphier: add video input subsystem reset control
2017-08-13 9:00 ` Katsuhiro Suzuki
@ 2017-08-13 9:00 ` Katsuhiro Suzuki
-1 siblings, 0 replies; 10+ messages in thread
From: Katsuhiro Suzuki @ 2017-08-13 9:00 UTC (permalink / raw)
To: Philipp Zabel, Masahiro Yamada, linux-arm-kernel
Cc: Masami Hiramatsu, Jassi Brar, linux-kernel, Katsuhiro Suzuki
Add a reset line for video input subsystem (EXIV) on
UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
drivers/reset/reset-uniphier.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 90c52a96f775..f60c137c17cb 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -95,6 +95,7 @@ static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC, MIO) */
UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
+ UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
UNIPHIER_RESET_END,
};
@@ -109,6 +110,7 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */
UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
+ UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
UNIPHIER_RESET_END,
};
--
2.13.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/3] reset: uniphier: add video input subsystem reset control
@ 2017-08-13 9:00 ` Katsuhiro Suzuki
0 siblings, 0 replies; 10+ messages in thread
From: Katsuhiro Suzuki @ 2017-08-13 9:00 UTC (permalink / raw)
To: linux-arm-kernel
Add a reset line for video input subsystem (EXIV) on
UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
drivers/reset/reset-uniphier.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index 90c52a96f775..f60c137c17cb 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -95,6 +95,7 @@ static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC, MIO) */
UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
+ UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
UNIPHIER_RESET_END,
};
@@ -109,6 +110,7 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESETX(19, 0x200c, 15), /* USB30-PHY3 */
UNIPHIER_RESETX(40, 0x2008, 0), /* AIO */
UNIPHIER_RESETX(41, 0x2008, 1), /* EVEA */
+ UNIPHIER_RESETX(42, 0x2010, 2), /* EXIV */
UNIPHIER_RESET_END,
};
--
2.13.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/3] reset: uniphier: add analog amplifiers reset control
2017-08-13 9:00 ` Katsuhiro Suzuki
@ 2017-08-13 9:00 ` Katsuhiro Suzuki
-1 siblings, 0 replies; 10+ messages in thread
From: Katsuhiro Suzuki @ 2017-08-13 9:00 UTC (permalink / raw)
To: Philipp Zabel, Masahiro Yamada, linux-arm-kernel
Cc: Masami Hiramatsu, Jassi Brar, linux-kernel, Katsuhiro Suzuki
Add a reset line for analog signal amplifier core (ADAMV) on
UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
Changes for v2:
- ID changes to 0 because ADAMV reset controller independents
from other reset controllers.
- Add DT-binding documents.
---
.../devicetree/bindings/reset/uniphier-reset.txt | 25 ++++++++++++++++++++++
drivers/reset/reset-uniphier.c | 15 +++++++++++++
2 files changed, 40 insertions(+)
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index b80ccc03ab9f..68a6f487c409 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -90,3 +90,28 @@ Example:
other nodes ...
};
+
+
+Analog signal amplifier reset
+-----------------------------
+
+Required properties:
+- compatible: should be one of the following:
+ "socionext,uniphier-ld11-adamv-reset" - for LD11 SoC
+ "socionext,uniphier-ld20-adamv-reset" - for LD20 SoC
+- #reset-cells: should be 1.
+
+Example:
+
+ adamv@57920000 {
+ compatible = "socionext,uniphier-ld11-adamv",
+ "simple-mfd", "syscon";
+ reg = <0x57920000 0x1000>;
+
+ adamv_rst: reset {
+ compatible = "socionext,uniphier-ld11-adamv-reset";
+ #reset-cells = <1>;
+ };
+
+ other nodes ...
+ };
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index f60c137c17cb..bda2dd196ae5 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -196,6 +196,12 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
UNIPHIER_RESET_END,
};
+/* Analog signal amplifiers reset data */
+static const struct uniphier_reset_data uniphier_ld11_adamv_reset_data[] = {
+ UNIPHIER_RESETX(0, 0x10, 6), /* EVEA */
+ UNIPHIER_RESET_END,
+};
+
/* core implementaton */
struct uniphier_reset_priv {
struct reset_controller_dev rcdev;
@@ -415,6 +421,15 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-peri-reset",
.data = uniphier_pro4_peri_reset_data,
},
+ /* Analog signal amplifiers reset */
+ {
+ .compatible = "socionext,uniphier-ld11-adamv-reset",
+ .data = uniphier_ld11_adamv_reset_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-adamv-reset",
+ .data = uniphier_ld11_adamv_reset_data,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_reset_match);
--
2.13.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/3] reset: uniphier: add analog amplifiers reset control
@ 2017-08-13 9:00 ` Katsuhiro Suzuki
0 siblings, 0 replies; 10+ messages in thread
From: Katsuhiro Suzuki @ 2017-08-13 9:00 UTC (permalink / raw)
To: linux-arm-kernel
Add a reset line for analog signal amplifier core (ADAMV) on
UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
---
Changes for v2:
- ID changes to 0 because ADAMV reset controller independents
from other reset controllers.
- Add DT-binding documents.
---
.../devicetree/bindings/reset/uniphier-reset.txt | 25 ++++++++++++++++++++++
drivers/reset/reset-uniphier.c | 15 +++++++++++++
2 files changed, 40 insertions(+)
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index b80ccc03ab9f..68a6f487c409 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -90,3 +90,28 @@ Example:
other nodes ...
};
+
+
+Analog signal amplifier reset
+-----------------------------
+
+Required properties:
+- compatible: should be one of the following:
+ "socionext,uniphier-ld11-adamv-reset" - for LD11 SoC
+ "socionext,uniphier-ld20-adamv-reset" - for LD20 SoC
+- #reset-cells: should be 1.
+
+Example:
+
+ adamv at 57920000 {
+ compatible = "socionext,uniphier-ld11-adamv",
+ "simple-mfd", "syscon";
+ reg = <0x57920000 0x1000>;
+
+ adamv_rst: reset {
+ compatible = "socionext,uniphier-ld11-adamv-reset";
+ #reset-cells = <1>;
+ };
+
+ other nodes ...
+ };
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index f60c137c17cb..bda2dd196ae5 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -196,6 +196,12 @@ static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
UNIPHIER_RESET_END,
};
+/* Analog signal amplifiers reset data */
+static const struct uniphier_reset_data uniphier_ld11_adamv_reset_data[] = {
+ UNIPHIER_RESETX(0, 0x10, 6), /* EVEA */
+ UNIPHIER_RESET_END,
+};
+
/* core implementaton */
struct uniphier_reset_priv {
struct reset_controller_dev rcdev;
@@ -415,6 +421,15 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-peri-reset",
.data = uniphier_pro4_peri_reset_data,
},
+ /* Analog signal amplifiers reset */
+ {
+ .compatible = "socionext,uniphier-ld11-adamv-reset",
+ .data = uniphier_ld11_adamv_reset_data,
+ },
+ {
+ .compatible = "socionext,uniphier-ld20-adamv-reset",
+ .data = uniphier_ld11_adamv_reset_data,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_reset_match);
--
2.13.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 3/3] reset: uniphier: add analog amplifiers reset control
2017-08-13 9:00 ` Katsuhiro Suzuki
@ 2017-08-13 14:23 ` Masahiro Yamada
-1 siblings, 0 replies; 10+ messages in thread
From: Masahiro Yamada @ 2017-08-13 14:23 UTC (permalink / raw)
To: Katsuhiro Suzuki
Cc: Philipp Zabel, linux-arm-kernel, Masami Hiramatsu, Jassi Brar,
Linux Kernel Mailing List
2017-08-13 18:00 GMT+09:00 Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>:
> Add a reset line for analog signal amplifier core (ADAMV) on
> UniPhier LD11/LD20 SoCs.
>
> Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
>
> ---
>
> Changes for v2:
> - ID changes to 0 because ADAMV reset controller independents
> from other reset controllers.
> - Add DT-binding documents.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Thanks!
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 3/3] reset: uniphier: add analog amplifiers reset control
@ 2017-08-13 14:23 ` Masahiro Yamada
0 siblings, 0 replies; 10+ messages in thread
From: Masahiro Yamada @ 2017-08-13 14:23 UTC (permalink / raw)
To: linux-arm-kernel
2017-08-13 18:00 GMT+09:00 Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>:
> Add a reset line for analog signal amplifier core (ADAMV) on
> UniPhier LD11/LD20 SoCs.
>
> Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
>
> ---
>
> Changes for v2:
> - ID changes to 0 because ADAMV reset controller independents
> from other reset controllers.
> - Add DT-binding documents.
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Thanks!
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 3/3] reset: uniphier: add analog amplifiers reset control
2017-08-13 9:00 ` Katsuhiro Suzuki
@ 2017-08-14 7:34 ` Philipp Zabel
-1 siblings, 0 replies; 10+ messages in thread
From: Philipp Zabel @ 2017-08-14 7:34 UTC (permalink / raw)
To: Katsuhiro Suzuki, Masahiro Yamada, linux-arm-kernel
Cc: Masami Hiramatsu, Jassi Brar, linux-kernel
On Sun, 2017-08-13 at 18:00 +0900, Katsuhiro Suzuki wrote:
> Add a reset line for analog signal amplifier core (ADAMV) on
> UniPhier LD11/LD20 SoCs.
>
> Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Thank you, applied all three to the reset/next branch with Masahiro's
acks.
regards
Philipp
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 3/3] reset: uniphier: add analog amplifiers reset control
@ 2017-08-14 7:34 ` Philipp Zabel
0 siblings, 0 replies; 10+ messages in thread
From: Philipp Zabel @ 2017-08-14 7:34 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, 2017-08-13 at 18:00 +0900, Katsuhiro Suzuki wrote:
> Add a reset line for analog signal amplifier core (ADAMV) on
> UniPhier LD11/LD20 SoCs.
>
> Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Thank you, applied all three to the reset/next branch with Masahiro's
acks.
regards
Philipp
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-08-14 7:34 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-13 9:00 [PATCH v2 1/3] reset: uniphier: add audio systems reset control Katsuhiro Suzuki
2017-08-13 9:00 ` Katsuhiro Suzuki
2017-08-13 9:00 ` [PATCH v2 2/3] reset: uniphier: add video input subsystem " Katsuhiro Suzuki
2017-08-13 9:00 ` Katsuhiro Suzuki
2017-08-13 9:00 ` [PATCH v2 3/3] reset: uniphier: add analog amplifiers " Katsuhiro Suzuki
2017-08-13 9:00 ` Katsuhiro Suzuki
2017-08-13 14:23 ` Masahiro Yamada
2017-08-13 14:23 ` Masahiro Yamada
2017-08-14 7:34 ` Philipp Zabel
2017-08-14 7:34 ` Philipp Zabel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.