[PATCH v2] clk: msm8996-gcc: add missing smmu clks

[PATCH v2] clk: msm8996-gcc: add missing smmu clks

[srinivas.kandagatla]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

This patch adds missing LPASS smmu clks which are required by the audio driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
Changes since v1:
	- Added halt_check flag as suggested by Stephen Boyd

 drivers/clk/qcom/gcc-msm8996.c               | 28 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-msm8996.h |  2 ++
 2 files changed, 30 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index d1238cc..9b83743 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -2644,6 +2644,32 @@ static struct clk_fixed_factor ufs_rx_cfg_clk_src = {
 	},
 };
 
+static struct clk_branch gcc_hlos1_vote_lpass_core_smmu_clk = {
+	.halt_reg = 0x7d010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x7d010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "hlos1_vote_lpass_core_smmu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_hlos1_vote_lpass_adsp_smmu_clk = {
+	.halt_reg = 0x7d014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x7d014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "hlos1_vote_lpass_adsp_smmu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_ufs_rx_cfg_clk = {
 	.halt_reg = 0x75014,
 	.clkr = {
@@ -3217,6 +3243,8 @@ static struct clk_regmap *gcc_msm8996_clocks[] = {
 	[GCC_UFS_AHB_CLK] = &gcc_ufs_ahb_clk.clkr,
 	[GCC_UFS_TX_CFG_CLK] = &gcc_ufs_tx_cfg_clk.clkr,
 	[GCC_UFS_RX_CFG_CLK] = &gcc_ufs_rx_cfg_clk.clkr,
+	[GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK] = &gcc_hlos1_vote_lpass_core_smmu_clk.clkr,
+	[GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK] = &gcc_hlos1_vote_lpass_adsp_smmu_clk.clkr,
 	[GCC_UFS_TX_SYMBOL_0_CLK] = &gcc_ufs_tx_symbol_0_clk.clkr,
 	[GCC_UFS_RX_SYMBOL_0_CLK] = &gcc_ufs_rx_symbol_0_clk.clkr,
 	[GCC_UFS_RX_SYMBOL_1_CLK] = &gcc_ufs_rx_symbol_1_clk.clkr,
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8996.h b/include/dt-bindings/clock/qcom,gcc-msm8996.h
index 1847e13..4df1898 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8996.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8996.h
@@ -229,6 +229,8 @@
 #define GCC_PCIE_CLKREF_CLK					216
 #define GCC_RX2_USB2_CLKREF_CLK					217
 #define GCC_RX1_USB2_CLKREF_CLK					218
+#define GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK			219
+#define GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK			220
 
 #define GCC_SYSTEM_NOC_BCR					0
 #define GCC_CONFIG_NOC_BCR					1
-- 
2.9.3

Re: [PATCH v2] clk: msm8996-gcc: add missing smmu clks

[Stephen Boyd]

On 08/14, srinivas.kandagatla@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> 
> This patch adds missing LPASS smmu clks which are required by the audio driver.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---

Applied to clk-next

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project