All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Wei Wang <wei.w.wang@intel.com>
Cc: virtio-dev@lists.oasis-open.org, linux-kernel@vger.kernel.org,
	qemu-devel@nongnu.org, virtualization@lists.linux-foundation.org,
	kvm@vger.kernel.org, linux-mm@kvack.org, mhocko@kernel.org,
	akpm@linux-foundation.org, mawilcox@microsoft.com,
	david@redhat.com, cornelia.huck@de.ibm.com,
	mgorman@techsingularity.net, aarcange@redhat.com,
	amit.shah@redhat.com, pbonzini@redhat.com, willy@infradead.org,
	liliang.opensource@gmail.com, yang.zhang.wz@gmail.com,
	quan.xu@aliyun.com
Subject: Re: [PATCH v14 3/5] virtio-balloon: VIRTIO_BALLOON_F_SG
Date: Fri, 18 Aug 2017 05:22:49 +0300	[thread overview]
Message-ID: <20170818051451-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <1502940416-42944-4-git-send-email-wei.w.wang@intel.com>

On Thu, Aug 17, 2017 at 11:26:54AM +0800, Wei Wang wrote:
> Add a new feature, VIRTIO_BALLOON_F_SG, which enables the transfer
> of balloon (i.e. inflated/deflated) pages using scatter-gather lists
> to the host.
> 
> The implementation of the previous virtio-balloon is not very
> efficient, because the balloon pages are transferred to the
> host one by one. Here is the breakdown of the time in percentage
> spent on each step of the balloon inflating process (inflating
> 7GB of an 8GB idle guest).
> 
> 1) allocating pages (6.5%)
> 2) sending PFNs to host (68.3%)
> 3) address translation (6.1%)
> 4) madvise (19%)
> 
> It takes about 4126ms for the inflating process to complete.
> The above profiling shows that the bottlenecks are stage 2)
> and stage 4).
> 
> This patch optimizes step 2) by transferring pages to the host in
> sgs. An sg describes a chunk of guest physically continuous pages.
> With this mechanism, step 4) can also be optimized by doing address
> translation and madvise() in chunks rather than page by page.
> 
> With this new feature, the above ballooning process takes ~541ms
> resulting in an improvement of ~87%.
> 
> TODO: optimize stage 1) by allocating/freeing a chunk of pages
> instead of a single page each time.
> 
> Signed-off-by: Wei Wang <wei.w.wang@intel.com>
> Signed-off-by: Liang Li <liang.z.li@intel.com>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>  drivers/virtio/virtio_balloon.c     | 157 ++++++++++++++++++++++++++++++++----
>  include/uapi/linux/virtio_balloon.h |   1 +
>  2 files changed, 141 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index f0b3a0b..72041b4 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -32,6 +32,7 @@
>  #include <linux/mm.h>
>  #include <linux/mount.h>
>  #include <linux/magic.h>
> +#include <linux/xbitmap.h>
>  
>  /*
>   * Balloon device works in 4K page units.  So each page is pointed to by
> @@ -79,6 +80,9 @@ struct virtio_balloon {
>  	/* Synchronize access/update to this struct virtio_balloon elements */
>  	struct mutex balloon_lock;
>  
> +	/* The xbitmap used to record ballooned pages */
> +	struct xb page_xb;
> +
>  	/* The array of pfns we tell the Host about. */
>  	unsigned int num_pfns;
>  	__virtio32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
> @@ -141,13 +145,98 @@ static void set_page_pfns(struct virtio_balloon *vb,
>  					  page_to_balloon_pfn(page) + i);
>  }
>  
> +static int add_one_sg(struct virtqueue *vq, void *addr, uint32_t size)
> +{
> +	struct scatterlist sg;
> +
> +	sg_init_one(&sg, addr, size);
> +	return virtqueue_add_inbuf(vq, &sg, 1, vq, GFP_KERNEL);
> +}
> +
> +static void send_balloon_page_sg(struct virtio_balloon *vb,
> +				 struct virtqueue *vq,
> +				 void *addr,
> +				 uint32_t size)
> +{
> +	unsigned int len;
> +	int ret;
> +
> +	do {
> +		ret = add_one_sg(vq, addr, size);
> +		virtqueue_kick(vq);
> +		wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> +		/*
> +		 * It is uncommon to see the vq is full, because the sg is sent
> +		 * one by one and the device is able to handle it in time. But
> +		 * if that happens, we go back to retry after an entry gets
> +		 * released.
> +		 */

Why send one by one though? Why not batch some s/gs and wait for all
of them to be completed? If memory if fragmented, waiting every time is
worse than what we have now (VIRTIO_BALLOON_ARRAY_PFNS_MAX at a time).

> +	} while (unlikely(ret == -ENOSPC));
> +}
> +
> +/*
> + * Send balloon pages in sgs to host. The balloon pages are recorded in the
> + * page xbitmap. Each bit in the bitmap corresponds to a page of PAGE_SIZE.
> + * The page xbitmap is searched for continuous "1" bits, which correspond
> + * to continuous pages, to chunk into sgs.
> + *
> + * @page_xb_start and @page_xb_end form the range of bits in the xbitmap that
> + * need to be searched.
> + */
> +static void tell_host_sgs(struct virtio_balloon *vb,
> +			  struct virtqueue *vq,
> +			  unsigned long page_xb_start,
> +			  unsigned long page_xb_end)
> +{
> +	unsigned long sg_pfn_start, sg_pfn_end;
> +	void *sg_addr;
> +	uint32_t sg_len, sg_max_len = round_down(UINT_MAX, PAGE_SIZE);
> +
> +	sg_pfn_start = page_xb_start;
> +	while (sg_pfn_start < page_xb_end) {
> +		sg_pfn_start = xb_find_next_bit(&vb->page_xb, sg_pfn_start,
> +						page_xb_end, 1);
> +		if (sg_pfn_start == page_xb_end + 1)
> +			break;
> +		sg_pfn_end = xb_find_next_bit(&vb->page_xb, sg_pfn_start + 1,
> +					      page_xb_end, 0);
> +		sg_addr = (void *)pfn_to_kaddr(sg_pfn_start);
> +		sg_len = (sg_pfn_end - sg_pfn_start) << PAGE_SHIFT;
> +		while (sg_len > sg_max_len) {
> +			send_balloon_page_sg(vb, vq, sg_addr, sg_max_len);
> +			sg_addr += sg_max_len;
> +			sg_len -= sg_max_len;
> +		}
> +		send_balloon_page_sg(vb, vq, sg_addr, sg_len);
> +		xb_zero(&vb->page_xb, sg_pfn_start, sg_pfn_end);
> +		sg_pfn_start = sg_pfn_end + 1;
> +	}
> +}
> +
> +static inline void xb_set_page(struct virtio_balloon *vb,
> +			       struct page *page,
> +			       unsigned long *pfn_min,
> +			       unsigned long *pfn_max)
> +{
> +	unsigned long pfn = page_to_pfn(page);
> +
> +	*pfn_min = min(pfn, *pfn_min);
> +	*pfn_max = max(pfn, *pfn_max);
> +	xb_preload(GFP_KERNEL);
> +	xb_set_bit(&vb->page_xb, pfn);
> +	xb_preload_end();
> +}
> +
>  static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  {
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	unsigned num_allocated_pages;
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
>  	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -162,7 +251,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  			msleep(200);
>  			break;
>  		}
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
>  		if (!virtio_has_feature(vb->vdev,
>  					VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> @@ -171,8 +265,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  
>  	num_allocated_pages = vb->num_pfns;
>  	/* Did we get any? */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->inflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->inflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->inflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	return num_allocated_pages;
> @@ -198,9 +296,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	struct page *page;
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	LIST_HEAD(pages);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
> -	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	/* Traditionally, we can only do one array worth at a time. */
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	/* We can't release more pages than taken */
> @@ -210,7 +311,11 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  		page = balloon_page_dequeue(vb_dev_info);
>  		if (!page)
>  			break;
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		list_add(&page->lru, &pages);
>  		vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
>  	}
> @@ -221,8 +326,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	 * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
>  	 * is true, we *have* to do it in this order
>  	 */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->deflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->deflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->deflate_vq);
> +	}
>  	release_pages_balloon(vb, &pages);
>  	mutex_unlock(&vb->balloon_lock);
>  	return num_freed_pages;
> @@ -441,6 +550,7 @@ static int init_vqs(struct virtio_balloon *vb)
>  }
>  
>  #ifdef CONFIG_BALLOON_COMPACTION
> +
>  /*
>   * virtballoon_migratepage - perform the balloon page migration on behalf of
>   *			     a compation thread.     (called under page lock)
> @@ -464,6 +574,7 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  {
>  	struct virtio_balloon *vb = container_of(vb_dev_info,
>  			struct virtio_balloon, vb_dev_info);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
>  	unsigned long flags;
>  
>  	/*
> @@ -485,16 +596,24 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  	vb_dev_info->isolated_pages--;
>  	__count_vm_event(BALLOON_MIGRATE);
>  	spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, newpage);
> -	tell_host(vb, vb->inflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->inflate_vq, page_address(newpage),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, newpage);
> +		tell_host(vb, vb->inflate_vq);
> +	}
>  	/* balloon's page migration 2nd step -- deflate "page" */
>  	balloon_page_delete(page);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, page);
> -	tell_host(vb, vb->deflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->deflate_vq, page_address(page),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, page);
> +		tell_host(vb, vb->deflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	put_page(page); /* balloon reference */
> @@ -553,6 +672,9 @@ static int virtballoon_probe(struct virtio_device *vdev)
>  	if (err)
>  		goto out_free_vb;
>  
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_SG))
> +		xb_init(&vb->page_xb);
> +
>  	vb->nb.notifier_call = virtballoon_oom_notify;
>  	vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
>  	err = register_oom_notifier(&vb->nb);
> @@ -669,6 +791,7 @@ static unsigned int features[] = {
>  	VIRTIO_BALLOON_F_MUST_TELL_HOST,
>  	VIRTIO_BALLOON_F_STATS_VQ,
>  	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> +	VIRTIO_BALLOON_F_SG,
>  };
>  
>  static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..37780a7 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,6 +34,7 @@
>  #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
>  #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
>  #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_SG		3 /* Use sg instead of PFN lists */
>  
>  /* Size of a PFN in the balloon interface. */
>  #define VIRTIO_BALLOON_PFN_SHIFT 12
> -- 
> 2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Wei Wang <wei.w.wang@intel.com>
Cc: virtio-dev@lists.oasis-open.org, linux-kernel@vger.kernel.org,
	qemu-devel@nongnu.org, virtualization@lists.linux-foundation.org,
	kvm@vger.kernel.org, linux-mm@kvack.org, mhocko@kernel.org,
	akpm@linux-foundation.org, mawilcox@microsoft.com,
	david@redhat.com, cornelia.huck@de.ibm.com,
	mgorman@techsingularity.net, aarcange@redhat.com,
	amit.shah@redhat.com, pbonzini@redhat.com, willy@infradead.org,
	liliang.opensource@gmail.com, yang.zhang.wz@gmail.com,
	quan.xu@aliyun.com
Subject: Re: [PATCH v14 3/5] virtio-balloon: VIRTIO_BALLOON_F_SG
Date: Fri, 18 Aug 2017 05:22:49 +0300	[thread overview]
Message-ID: <20170818051451-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <1502940416-42944-4-git-send-email-wei.w.wang@intel.com>

On Thu, Aug 17, 2017 at 11:26:54AM +0800, Wei Wang wrote:
> Add a new feature, VIRTIO_BALLOON_F_SG, which enables the transfer
> of balloon (i.e. inflated/deflated) pages using scatter-gather lists
> to the host.
> 
> The implementation of the previous virtio-balloon is not very
> efficient, because the balloon pages are transferred to the
> host one by one. Here is the breakdown of the time in percentage
> spent on each step of the balloon inflating process (inflating
> 7GB of an 8GB idle guest).
> 
> 1) allocating pages (6.5%)
> 2) sending PFNs to host (68.3%)
> 3) address translation (6.1%)
> 4) madvise (19%)
> 
> It takes about 4126ms for the inflating process to complete.
> The above profiling shows that the bottlenecks are stage 2)
> and stage 4).
> 
> This patch optimizes step 2) by transferring pages to the host in
> sgs. An sg describes a chunk of guest physically continuous pages.
> With this mechanism, step 4) can also be optimized by doing address
> translation and madvise() in chunks rather than page by page.
> 
> With this new feature, the above ballooning process takes ~541ms
> resulting in an improvement of ~87%.
> 
> TODO: optimize stage 1) by allocating/freeing a chunk of pages
> instead of a single page each time.
> 
> Signed-off-by: Wei Wang <wei.w.wang@intel.com>
> Signed-off-by: Liang Li <liang.z.li@intel.com>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>  drivers/virtio/virtio_balloon.c     | 157 ++++++++++++++++++++++++++++++++----
>  include/uapi/linux/virtio_balloon.h |   1 +
>  2 files changed, 141 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index f0b3a0b..72041b4 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -32,6 +32,7 @@
>  #include <linux/mm.h>
>  #include <linux/mount.h>
>  #include <linux/magic.h>
> +#include <linux/xbitmap.h>
>  
>  /*
>   * Balloon device works in 4K page units.  So each page is pointed to by
> @@ -79,6 +80,9 @@ struct virtio_balloon {
>  	/* Synchronize access/update to this struct virtio_balloon elements */
>  	struct mutex balloon_lock;
>  
> +	/* The xbitmap used to record ballooned pages */
> +	struct xb page_xb;
> +
>  	/* The array of pfns we tell the Host about. */
>  	unsigned int num_pfns;
>  	__virtio32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
> @@ -141,13 +145,98 @@ static void set_page_pfns(struct virtio_balloon *vb,
>  					  page_to_balloon_pfn(page) + i);
>  }
>  
> +static int add_one_sg(struct virtqueue *vq, void *addr, uint32_t size)
> +{
> +	struct scatterlist sg;
> +
> +	sg_init_one(&sg, addr, size);
> +	return virtqueue_add_inbuf(vq, &sg, 1, vq, GFP_KERNEL);
> +}
> +
> +static void send_balloon_page_sg(struct virtio_balloon *vb,
> +				 struct virtqueue *vq,
> +				 void *addr,
> +				 uint32_t size)
> +{
> +	unsigned int len;
> +	int ret;
> +
> +	do {
> +		ret = add_one_sg(vq, addr, size);
> +		virtqueue_kick(vq);
> +		wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> +		/*
> +		 * It is uncommon to see the vq is full, because the sg is sent
> +		 * one by one and the device is able to handle it in time. But
> +		 * if that happens, we go back to retry after an entry gets
> +		 * released.
> +		 */

Why send one by one though? Why not batch some s/gs and wait for all
of them to be completed? If memory if fragmented, waiting every time is
worse than what we have now (VIRTIO_BALLOON_ARRAY_PFNS_MAX at a time).

> +	} while (unlikely(ret == -ENOSPC));
> +}
> +
> +/*
> + * Send balloon pages in sgs to host. The balloon pages are recorded in the
> + * page xbitmap. Each bit in the bitmap corresponds to a page of PAGE_SIZE.
> + * The page xbitmap is searched for continuous "1" bits, which correspond
> + * to continuous pages, to chunk into sgs.
> + *
> + * @page_xb_start and @page_xb_end form the range of bits in the xbitmap that
> + * need to be searched.
> + */
> +static void tell_host_sgs(struct virtio_balloon *vb,
> +			  struct virtqueue *vq,
> +			  unsigned long page_xb_start,
> +			  unsigned long page_xb_end)
> +{
> +	unsigned long sg_pfn_start, sg_pfn_end;
> +	void *sg_addr;
> +	uint32_t sg_len, sg_max_len = round_down(UINT_MAX, PAGE_SIZE);
> +
> +	sg_pfn_start = page_xb_start;
> +	while (sg_pfn_start < page_xb_end) {
> +		sg_pfn_start = xb_find_next_bit(&vb->page_xb, sg_pfn_start,
> +						page_xb_end, 1);
> +		if (sg_pfn_start == page_xb_end + 1)
> +			break;
> +		sg_pfn_end = xb_find_next_bit(&vb->page_xb, sg_pfn_start + 1,
> +					      page_xb_end, 0);
> +		sg_addr = (void *)pfn_to_kaddr(sg_pfn_start);
> +		sg_len = (sg_pfn_end - sg_pfn_start) << PAGE_SHIFT;
> +		while (sg_len > sg_max_len) {
> +			send_balloon_page_sg(vb, vq, sg_addr, sg_max_len);
> +			sg_addr += sg_max_len;
> +			sg_len -= sg_max_len;
> +		}
> +		send_balloon_page_sg(vb, vq, sg_addr, sg_len);
> +		xb_zero(&vb->page_xb, sg_pfn_start, sg_pfn_end);
> +		sg_pfn_start = sg_pfn_end + 1;
> +	}
> +}
> +
> +static inline void xb_set_page(struct virtio_balloon *vb,
> +			       struct page *page,
> +			       unsigned long *pfn_min,
> +			       unsigned long *pfn_max)
> +{
> +	unsigned long pfn = page_to_pfn(page);
> +
> +	*pfn_min = min(pfn, *pfn_min);
> +	*pfn_max = max(pfn, *pfn_max);
> +	xb_preload(GFP_KERNEL);
> +	xb_set_bit(&vb->page_xb, pfn);
> +	xb_preload_end();
> +}
> +
>  static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  {
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	unsigned num_allocated_pages;
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
>  	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -162,7 +251,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  			msleep(200);
>  			break;
>  		}
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
>  		if (!virtio_has_feature(vb->vdev,
>  					VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> @@ -171,8 +265,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  
>  	num_allocated_pages = vb->num_pfns;
>  	/* Did we get any? */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->inflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->inflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->inflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	return num_allocated_pages;
> @@ -198,9 +296,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	struct page *page;
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	LIST_HEAD(pages);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
> -	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	/* Traditionally, we can only do one array worth at a time. */
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	/* We can't release more pages than taken */
> @@ -210,7 +311,11 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  		page = balloon_page_dequeue(vb_dev_info);
>  		if (!page)
>  			break;
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		list_add(&page->lru, &pages);
>  		vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
>  	}
> @@ -221,8 +326,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	 * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
>  	 * is true, we *have* to do it in this order
>  	 */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->deflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->deflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->deflate_vq);
> +	}
>  	release_pages_balloon(vb, &pages);
>  	mutex_unlock(&vb->balloon_lock);
>  	return num_freed_pages;
> @@ -441,6 +550,7 @@ static int init_vqs(struct virtio_balloon *vb)
>  }
>  
>  #ifdef CONFIG_BALLOON_COMPACTION
> +
>  /*
>   * virtballoon_migratepage - perform the balloon page migration on behalf of
>   *			     a compation thread.     (called under page lock)
> @@ -464,6 +574,7 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  {
>  	struct virtio_balloon *vb = container_of(vb_dev_info,
>  			struct virtio_balloon, vb_dev_info);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
>  	unsigned long flags;
>  
>  	/*
> @@ -485,16 +596,24 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  	vb_dev_info->isolated_pages--;
>  	__count_vm_event(BALLOON_MIGRATE);
>  	spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, newpage);
> -	tell_host(vb, vb->inflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->inflate_vq, page_address(newpage),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, newpage);
> +		tell_host(vb, vb->inflate_vq);
> +	}
>  	/* balloon's page migration 2nd step -- deflate "page" */
>  	balloon_page_delete(page);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, page);
> -	tell_host(vb, vb->deflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->deflate_vq, page_address(page),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, page);
> +		tell_host(vb, vb->deflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	put_page(page); /* balloon reference */
> @@ -553,6 +672,9 @@ static int virtballoon_probe(struct virtio_device *vdev)
>  	if (err)
>  		goto out_free_vb;
>  
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_SG))
> +		xb_init(&vb->page_xb);
> +
>  	vb->nb.notifier_call = virtballoon_oom_notify;
>  	vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
>  	err = register_oom_notifier(&vb->nb);
> @@ -669,6 +791,7 @@ static unsigned int features[] = {
>  	VIRTIO_BALLOON_F_MUST_TELL_HOST,
>  	VIRTIO_BALLOON_F_STATS_VQ,
>  	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> +	VIRTIO_BALLOON_F_SG,
>  };
>  
>  static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..37780a7 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,6 +34,7 @@
>  #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
>  #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
>  #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_SG		3 /* Use sg instead of PFN lists */
>  
>  /* Size of a PFN in the balloon interface. */
>  #define VIRTIO_BALLOON_PFN_SHIFT 12
> -- 
> 2.7.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Wei Wang <wei.w.wang@intel.com>
Cc: virtio-dev@lists.oasis-open.org, linux-kernel@vger.kernel.org,
	qemu-devel@nongnu.org, virtualization@lists.linux-foundation.org,
	kvm@vger.kernel.org, linux-mm@kvack.org, mhocko@kernel.org,
	akpm@linux-foundation.org, mawilcox@microsoft.com,
	david@redhat.com, cornelia.huck@de.ibm.com,
	mgorman@techsingularity.net, aarcange@redhat.com,
	amit.shah@redhat.com, pbonzini@redhat.com, willy@infradead.org,
	liliang.opensource@gmail.com, yang.zhang.wz@gmail.com,
	quan.xu@aliyun.com
Subject: Re: [Qemu-devel] [PATCH v14 3/5] virtio-balloon: VIRTIO_BALLOON_F_SG
Date: Fri, 18 Aug 2017 05:22:49 +0300	[thread overview]
Message-ID: <20170818051451-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <1502940416-42944-4-git-send-email-wei.w.wang@intel.com>

On Thu, Aug 17, 2017 at 11:26:54AM +0800, Wei Wang wrote:
> Add a new feature, VIRTIO_BALLOON_F_SG, which enables the transfer
> of balloon (i.e. inflated/deflated) pages using scatter-gather lists
> to the host.
> 
> The implementation of the previous virtio-balloon is not very
> efficient, because the balloon pages are transferred to the
> host one by one. Here is the breakdown of the time in percentage
> spent on each step of the balloon inflating process (inflating
> 7GB of an 8GB idle guest).
> 
> 1) allocating pages (6.5%)
> 2) sending PFNs to host (68.3%)
> 3) address translation (6.1%)
> 4) madvise (19%)
> 
> It takes about 4126ms for the inflating process to complete.
> The above profiling shows that the bottlenecks are stage 2)
> and stage 4).
> 
> This patch optimizes step 2) by transferring pages to the host in
> sgs. An sg describes a chunk of guest physically continuous pages.
> With this mechanism, step 4) can also be optimized by doing address
> translation and madvise() in chunks rather than page by page.
> 
> With this new feature, the above ballooning process takes ~541ms
> resulting in an improvement of ~87%.
> 
> TODO: optimize stage 1) by allocating/freeing a chunk of pages
> instead of a single page each time.
> 
> Signed-off-by: Wei Wang <wei.w.wang@intel.com>
> Signed-off-by: Liang Li <liang.z.li@intel.com>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>  drivers/virtio/virtio_balloon.c     | 157 ++++++++++++++++++++++++++++++++----
>  include/uapi/linux/virtio_balloon.h |   1 +
>  2 files changed, 141 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index f0b3a0b..72041b4 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -32,6 +32,7 @@
>  #include <linux/mm.h>
>  #include <linux/mount.h>
>  #include <linux/magic.h>
> +#include <linux/xbitmap.h>
>  
>  /*
>   * Balloon device works in 4K page units.  So each page is pointed to by
> @@ -79,6 +80,9 @@ struct virtio_balloon {
>  	/* Synchronize access/update to this struct virtio_balloon elements */
>  	struct mutex balloon_lock;
>  
> +	/* The xbitmap used to record ballooned pages */
> +	struct xb page_xb;
> +
>  	/* The array of pfns we tell the Host about. */
>  	unsigned int num_pfns;
>  	__virtio32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
> @@ -141,13 +145,98 @@ static void set_page_pfns(struct virtio_balloon *vb,
>  					  page_to_balloon_pfn(page) + i);
>  }
>  
> +static int add_one_sg(struct virtqueue *vq, void *addr, uint32_t size)
> +{
> +	struct scatterlist sg;
> +
> +	sg_init_one(&sg, addr, size);
> +	return virtqueue_add_inbuf(vq, &sg, 1, vq, GFP_KERNEL);
> +}
> +
> +static void send_balloon_page_sg(struct virtio_balloon *vb,
> +				 struct virtqueue *vq,
> +				 void *addr,
> +				 uint32_t size)
> +{
> +	unsigned int len;
> +	int ret;
> +
> +	do {
> +		ret = add_one_sg(vq, addr, size);
> +		virtqueue_kick(vq);
> +		wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> +		/*
> +		 * It is uncommon to see the vq is full, because the sg is sent
> +		 * one by one and the device is able to handle it in time. But
> +		 * if that happens, we go back to retry after an entry gets
> +		 * released.
> +		 */

Why send one by one though? Why not batch some s/gs and wait for all
of them to be completed? If memory if fragmented, waiting every time is
worse than what we have now (VIRTIO_BALLOON_ARRAY_PFNS_MAX at a time).

> +	} while (unlikely(ret == -ENOSPC));
> +}
> +
> +/*
> + * Send balloon pages in sgs to host. The balloon pages are recorded in the
> + * page xbitmap. Each bit in the bitmap corresponds to a page of PAGE_SIZE.
> + * The page xbitmap is searched for continuous "1" bits, which correspond
> + * to continuous pages, to chunk into sgs.
> + *
> + * @page_xb_start and @page_xb_end form the range of bits in the xbitmap that
> + * need to be searched.
> + */
> +static void tell_host_sgs(struct virtio_balloon *vb,
> +			  struct virtqueue *vq,
> +			  unsigned long page_xb_start,
> +			  unsigned long page_xb_end)
> +{
> +	unsigned long sg_pfn_start, sg_pfn_end;
> +	void *sg_addr;
> +	uint32_t sg_len, sg_max_len = round_down(UINT_MAX, PAGE_SIZE);
> +
> +	sg_pfn_start = page_xb_start;
> +	while (sg_pfn_start < page_xb_end) {
> +		sg_pfn_start = xb_find_next_bit(&vb->page_xb, sg_pfn_start,
> +						page_xb_end, 1);
> +		if (sg_pfn_start == page_xb_end + 1)
> +			break;
> +		sg_pfn_end = xb_find_next_bit(&vb->page_xb, sg_pfn_start + 1,
> +					      page_xb_end, 0);
> +		sg_addr = (void *)pfn_to_kaddr(sg_pfn_start);
> +		sg_len = (sg_pfn_end - sg_pfn_start) << PAGE_SHIFT;
> +		while (sg_len > sg_max_len) {
> +			send_balloon_page_sg(vb, vq, sg_addr, sg_max_len);
> +			sg_addr += sg_max_len;
> +			sg_len -= sg_max_len;
> +		}
> +		send_balloon_page_sg(vb, vq, sg_addr, sg_len);
> +		xb_zero(&vb->page_xb, sg_pfn_start, sg_pfn_end);
> +		sg_pfn_start = sg_pfn_end + 1;
> +	}
> +}
> +
> +static inline void xb_set_page(struct virtio_balloon *vb,
> +			       struct page *page,
> +			       unsigned long *pfn_min,
> +			       unsigned long *pfn_max)
> +{
> +	unsigned long pfn = page_to_pfn(page);
> +
> +	*pfn_min = min(pfn, *pfn_min);
> +	*pfn_max = max(pfn, *pfn_max);
> +	xb_preload(GFP_KERNEL);
> +	xb_set_bit(&vb->page_xb, pfn);
> +	xb_preload_end();
> +}
> +
>  static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  {
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	unsigned num_allocated_pages;
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
>  	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -162,7 +251,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  			msleep(200);
>  			break;
>  		}
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
>  		if (!virtio_has_feature(vb->vdev,
>  					VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> @@ -171,8 +265,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  
>  	num_allocated_pages = vb->num_pfns;
>  	/* Did we get any? */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->inflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->inflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->inflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	return num_allocated_pages;
> @@ -198,9 +296,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	struct page *page;
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	LIST_HEAD(pages);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
> -	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	/* Traditionally, we can only do one array worth at a time. */
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	/* We can't release more pages than taken */
> @@ -210,7 +311,11 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  		page = balloon_page_dequeue(vb_dev_info);
>  		if (!page)
>  			break;
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		list_add(&page->lru, &pages);
>  		vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
>  	}
> @@ -221,8 +326,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	 * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
>  	 * is true, we *have* to do it in this order
>  	 */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->deflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->deflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->deflate_vq);
> +	}
>  	release_pages_balloon(vb, &pages);
>  	mutex_unlock(&vb->balloon_lock);
>  	return num_freed_pages;
> @@ -441,6 +550,7 @@ static int init_vqs(struct virtio_balloon *vb)
>  }
>  
>  #ifdef CONFIG_BALLOON_COMPACTION
> +
>  /*
>   * virtballoon_migratepage - perform the balloon page migration on behalf of
>   *			     a compation thread.     (called under page lock)
> @@ -464,6 +574,7 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  {
>  	struct virtio_balloon *vb = container_of(vb_dev_info,
>  			struct virtio_balloon, vb_dev_info);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
>  	unsigned long flags;
>  
>  	/*
> @@ -485,16 +596,24 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  	vb_dev_info->isolated_pages--;
>  	__count_vm_event(BALLOON_MIGRATE);
>  	spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, newpage);
> -	tell_host(vb, vb->inflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->inflate_vq, page_address(newpage),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, newpage);
> +		tell_host(vb, vb->inflate_vq);
> +	}
>  	/* balloon's page migration 2nd step -- deflate "page" */
>  	balloon_page_delete(page);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, page);
> -	tell_host(vb, vb->deflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->deflate_vq, page_address(page),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, page);
> +		tell_host(vb, vb->deflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	put_page(page); /* balloon reference */
> @@ -553,6 +672,9 @@ static int virtballoon_probe(struct virtio_device *vdev)
>  	if (err)
>  		goto out_free_vb;
>  
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_SG))
> +		xb_init(&vb->page_xb);
> +
>  	vb->nb.notifier_call = virtballoon_oom_notify;
>  	vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
>  	err = register_oom_notifier(&vb->nb);
> @@ -669,6 +791,7 @@ static unsigned int features[] = {
>  	VIRTIO_BALLOON_F_MUST_TELL_HOST,
>  	VIRTIO_BALLOON_F_STATS_VQ,
>  	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> +	VIRTIO_BALLOON_F_SG,
>  };
>  
>  static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..37780a7 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,6 +34,7 @@
>  #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
>  #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
>  #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_SG		3 /* Use sg instead of PFN lists */
>  
>  /* Size of a PFN in the balloon interface. */
>  #define VIRTIO_BALLOON_PFN_SHIFT 12
> -- 
> 2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Wei Wang <wei.w.wang@intel.com>
Cc: virtio-dev@lists.oasis-open.org, linux-kernel@vger.kernel.org,
	qemu-devel@nongnu.org, virtualization@lists.linux-foundation.org,
	kvm@vger.kernel.org, linux-mm@kvack.org, mhocko@kernel.org,
	akpm@linux-foundation.org, mawilcox@microsoft.com,
	david@redhat.com, cornelia.huck@de.ibm.com,
	mgorman@techsingularity.net, aarcange@redhat.com,
	amit.shah@redhat.com, pbonzini@redhat.com, willy@infradead.org,
	liliang.opensource@gmail.com, yang.zhang.wz@gmail.com,
	quan.xu@aliyun.com
Subject: [virtio-dev] Re: [PATCH v14 3/5] virtio-balloon: VIRTIO_BALLOON_F_SG
Date: Fri, 18 Aug 2017 05:22:49 +0300	[thread overview]
Message-ID: <20170818051451-mutt-send-email-mst@kernel.org> (raw)
In-Reply-To: <1502940416-42944-4-git-send-email-wei.w.wang@intel.com>

On Thu, Aug 17, 2017 at 11:26:54AM +0800, Wei Wang wrote:
> Add a new feature, VIRTIO_BALLOON_F_SG, which enables the transfer
> of balloon (i.e. inflated/deflated) pages using scatter-gather lists
> to the host.
> 
> The implementation of the previous virtio-balloon is not very
> efficient, because the balloon pages are transferred to the
> host one by one. Here is the breakdown of the time in percentage
> spent on each step of the balloon inflating process (inflating
> 7GB of an 8GB idle guest).
> 
> 1) allocating pages (6.5%)
> 2) sending PFNs to host (68.3%)
> 3) address translation (6.1%)
> 4) madvise (19%)
> 
> It takes about 4126ms for the inflating process to complete.
> The above profiling shows that the bottlenecks are stage 2)
> and stage 4).
> 
> This patch optimizes step 2) by transferring pages to the host in
> sgs. An sg describes a chunk of guest physically continuous pages.
> With this mechanism, step 4) can also be optimized by doing address
> translation and madvise() in chunks rather than page by page.
> 
> With this new feature, the above ballooning process takes ~541ms
> resulting in an improvement of ~87%.
> 
> TODO: optimize stage 1) by allocating/freeing a chunk of pages
> instead of a single page each time.
> 
> Signed-off-by: Wei Wang <wei.w.wang@intel.com>
> Signed-off-by: Liang Li <liang.z.li@intel.com>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>  drivers/virtio/virtio_balloon.c     | 157 ++++++++++++++++++++++++++++++++----
>  include/uapi/linux/virtio_balloon.h |   1 +
>  2 files changed, 141 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index f0b3a0b..72041b4 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -32,6 +32,7 @@
>  #include <linux/mm.h>
>  #include <linux/mount.h>
>  #include <linux/magic.h>
> +#include <linux/xbitmap.h>
>  
>  /*
>   * Balloon device works in 4K page units.  So each page is pointed to by
> @@ -79,6 +80,9 @@ struct virtio_balloon {
>  	/* Synchronize access/update to this struct virtio_balloon elements */
>  	struct mutex balloon_lock;
>  
> +	/* The xbitmap used to record ballooned pages */
> +	struct xb page_xb;
> +
>  	/* The array of pfns we tell the Host about. */
>  	unsigned int num_pfns;
>  	__virtio32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
> @@ -141,13 +145,98 @@ static void set_page_pfns(struct virtio_balloon *vb,
>  					  page_to_balloon_pfn(page) + i);
>  }
>  
> +static int add_one_sg(struct virtqueue *vq, void *addr, uint32_t size)
> +{
> +	struct scatterlist sg;
> +
> +	sg_init_one(&sg, addr, size);
> +	return virtqueue_add_inbuf(vq, &sg, 1, vq, GFP_KERNEL);
> +}
> +
> +static void send_balloon_page_sg(struct virtio_balloon *vb,
> +				 struct virtqueue *vq,
> +				 void *addr,
> +				 uint32_t size)
> +{
> +	unsigned int len;
> +	int ret;
> +
> +	do {
> +		ret = add_one_sg(vq, addr, size);
> +		virtqueue_kick(vq);
> +		wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> +		/*
> +		 * It is uncommon to see the vq is full, because the sg is sent
> +		 * one by one and the device is able to handle it in time. But
> +		 * if that happens, we go back to retry after an entry gets
> +		 * released.
> +		 */

Why send one by one though? Why not batch some s/gs and wait for all
of them to be completed? If memory if fragmented, waiting every time is
worse than what we have now (VIRTIO_BALLOON_ARRAY_PFNS_MAX at a time).

> +	} while (unlikely(ret == -ENOSPC));
> +}
> +
> +/*
> + * Send balloon pages in sgs to host. The balloon pages are recorded in the
> + * page xbitmap. Each bit in the bitmap corresponds to a page of PAGE_SIZE.
> + * The page xbitmap is searched for continuous "1" bits, which correspond
> + * to continuous pages, to chunk into sgs.
> + *
> + * @page_xb_start and @page_xb_end form the range of bits in the xbitmap that
> + * need to be searched.
> + */
> +static void tell_host_sgs(struct virtio_balloon *vb,
> +			  struct virtqueue *vq,
> +			  unsigned long page_xb_start,
> +			  unsigned long page_xb_end)
> +{
> +	unsigned long sg_pfn_start, sg_pfn_end;
> +	void *sg_addr;
> +	uint32_t sg_len, sg_max_len = round_down(UINT_MAX, PAGE_SIZE);
> +
> +	sg_pfn_start = page_xb_start;
> +	while (sg_pfn_start < page_xb_end) {
> +		sg_pfn_start = xb_find_next_bit(&vb->page_xb, sg_pfn_start,
> +						page_xb_end, 1);
> +		if (sg_pfn_start == page_xb_end + 1)
> +			break;
> +		sg_pfn_end = xb_find_next_bit(&vb->page_xb, sg_pfn_start + 1,
> +					      page_xb_end, 0);
> +		sg_addr = (void *)pfn_to_kaddr(sg_pfn_start);
> +		sg_len = (sg_pfn_end - sg_pfn_start) << PAGE_SHIFT;
> +		while (sg_len > sg_max_len) {
> +			send_balloon_page_sg(vb, vq, sg_addr, sg_max_len);
> +			sg_addr += sg_max_len;
> +			sg_len -= sg_max_len;
> +		}
> +		send_balloon_page_sg(vb, vq, sg_addr, sg_len);
> +		xb_zero(&vb->page_xb, sg_pfn_start, sg_pfn_end);
> +		sg_pfn_start = sg_pfn_end + 1;
> +	}
> +}
> +
> +static inline void xb_set_page(struct virtio_balloon *vb,
> +			       struct page *page,
> +			       unsigned long *pfn_min,
> +			       unsigned long *pfn_max)
> +{
> +	unsigned long pfn = page_to_pfn(page);
> +
> +	*pfn_min = min(pfn, *pfn_min);
> +	*pfn_max = max(pfn, *pfn_max);
> +	xb_preload(GFP_KERNEL);
> +	xb_set_bit(&vb->page_xb, pfn);
> +	xb_preload_end();
> +}
> +
>  static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  {
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	unsigned num_allocated_pages;
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
>  	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -162,7 +251,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  			msleep(200);
>  			break;
>  		}
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
>  		if (!virtio_has_feature(vb->vdev,
>  					VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> @@ -171,8 +265,12 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>  
>  	num_allocated_pages = vb->num_pfns;
>  	/* Did we get any? */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->inflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->inflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->inflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	return num_allocated_pages;
> @@ -198,9 +296,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	struct page *page;
>  	struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
>  	LIST_HEAD(pages);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
> +	unsigned long pfn_max = 0, pfn_min = ULONG_MAX;
>  
> -	/* We can only do one array worth at a time. */
> -	num = min(num, ARRAY_SIZE(vb->pfns));
> +	/* Traditionally, we can only do one array worth at a time. */
> +	if (!use_sg)
> +		num = min(num, ARRAY_SIZE(vb->pfns));
>  
>  	mutex_lock(&vb->balloon_lock);
>  	/* We can't release more pages than taken */
> @@ -210,7 +311,11 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  		page = balloon_page_dequeue(vb_dev_info);
>  		if (!page)
>  			break;
> -		set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +		if (use_sg)
> +			xb_set_page(vb, page, &pfn_min, &pfn_max);
> +		else
> +			set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> +
>  		list_add(&page->lru, &pages);
>  		vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
>  	}
> @@ -221,8 +326,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
>  	 * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
>  	 * is true, we *have* to do it in this order
>  	 */
> -	if (vb->num_pfns != 0)
> -		tell_host(vb, vb->deflate_vq);
> +	if (vb->num_pfns) {
> +		if (use_sg)
> +			tell_host_sgs(vb, vb->deflate_vq, pfn_min, pfn_max);
> +		else
> +			tell_host(vb, vb->deflate_vq);
> +	}
>  	release_pages_balloon(vb, &pages);
>  	mutex_unlock(&vb->balloon_lock);
>  	return num_freed_pages;
> @@ -441,6 +550,7 @@ static int init_vqs(struct virtio_balloon *vb)
>  }
>  
>  #ifdef CONFIG_BALLOON_COMPACTION
> +
>  /*
>   * virtballoon_migratepage - perform the balloon page migration on behalf of
>   *			     a compation thread.     (called under page lock)
> @@ -464,6 +574,7 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  {
>  	struct virtio_balloon *vb = container_of(vb_dev_info,
>  			struct virtio_balloon, vb_dev_info);
> +	bool use_sg = virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_SG);
>  	unsigned long flags;
>  
>  	/*
> @@ -485,16 +596,24 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
>  	vb_dev_info->isolated_pages--;
>  	__count_vm_event(BALLOON_MIGRATE);
>  	spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, newpage);
> -	tell_host(vb, vb->inflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->inflate_vq, page_address(newpage),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, newpage);
> +		tell_host(vb, vb->inflate_vq);
> +	}
>  	/* balloon's page migration 2nd step -- deflate "page" */
>  	balloon_page_delete(page);
> -	vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> -	set_page_pfns(vb, vb->pfns, page);
> -	tell_host(vb, vb->deflate_vq);
> -
> +	if (use_sg) {
> +		send_balloon_page_sg(vb, vb->deflate_vq, page_address(page),
> +				     PAGE_SIZE);
> +	} else {
> +		vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> +		set_page_pfns(vb, vb->pfns, page);
> +		tell_host(vb, vb->deflate_vq);
> +	}
>  	mutex_unlock(&vb->balloon_lock);
>  
>  	put_page(page); /* balloon reference */
> @@ -553,6 +672,9 @@ static int virtballoon_probe(struct virtio_device *vdev)
>  	if (err)
>  		goto out_free_vb;
>  
> +	if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_SG))
> +		xb_init(&vb->page_xb);
> +
>  	vb->nb.notifier_call = virtballoon_oom_notify;
>  	vb->nb.priority = VIRTBALLOON_OOM_NOTIFY_PRIORITY;
>  	err = register_oom_notifier(&vb->nb);
> @@ -669,6 +791,7 @@ static unsigned int features[] = {
>  	VIRTIO_BALLOON_F_MUST_TELL_HOST,
>  	VIRTIO_BALLOON_F_STATS_VQ,
>  	VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> +	VIRTIO_BALLOON_F_SG,
>  };
>  
>  static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..37780a7 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,6 +34,7 @@
>  #define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
>  #define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
>  #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM	2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_SG		3 /* Use sg instead of PFN lists */
>  
>  /* Size of a PFN in the balloon interface. */
>  #define VIRTIO_BALLOON_PFN_SHIFT 12
> -- 
> 2.7.4

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org


  reply	other threads:[~2017-08-18  2:22 UTC|newest]

Thread overview: 115+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-17  3:26 [PATCH v14 0/5] Virtio-balloon Enhancement Wei Wang
2017-08-17  3:26 ` [virtio-dev] " Wei Wang
2017-08-17  3:26 ` [Qemu-devel] " Wei Wang
2017-08-17  3:26 ` Wei Wang
2017-08-17  3:26 ` [PATCH v14 1/5] lib/xbitmap: Introduce xbitmap Wei Wang
2017-08-17  3:26 ` Wei Wang
2017-08-17  3:26   ` [virtio-dev] " Wei Wang
2017-08-17  3:26   ` [Qemu-devel] " Wei Wang
2017-08-17  3:26   ` Wei Wang
2017-08-19 20:30   ` kbuild test robot
2017-08-19 20:30     ` [Qemu-devel] " kbuild test robot
2017-08-19 20:30     ` kbuild test robot
2017-08-19 20:30   ` kbuild test robot
2017-08-17  3:26 ` [PATCH v14 2/5] lib/xbitmap: add xb_find_next_bit() and xb_zero() Wei Wang
2017-08-17  3:26 ` Wei Wang
2017-08-17  3:26   ` [virtio-dev] " Wei Wang
2017-08-17  3:26   ` [Qemu-devel] " Wei Wang
2017-08-17  3:26   ` Wei Wang
2017-08-17  3:26 ` [PATCH v14 3/5] virtio-balloon: VIRTIO_BALLOON_F_SG Wei Wang
2017-08-17  3:26 ` Wei Wang
2017-08-17  3:26   ` [virtio-dev] " Wei Wang
2017-08-17  3:26   ` [Qemu-devel] " Wei Wang
2017-08-17  3:26   ` Wei Wang
2017-08-18  2:22   ` Michael S. Tsirkin [this message]
2017-08-18  2:22     ` [virtio-dev] " Michael S. Tsirkin
2017-08-18  2:22     ` [Qemu-devel] " Michael S. Tsirkin
2017-08-18  2:22     ` Michael S. Tsirkin
2017-08-18  7:39     ` Wei Wang
2017-08-18  7:39     ` Wei Wang
2017-08-18  7:39       ` [virtio-dev] " Wei Wang
2017-08-18  7:39       ` [Qemu-devel] " Wei Wang
2017-08-18  7:39       ` Wei Wang
2017-08-21 20:22       ` Michael S. Tsirkin
2017-08-21 20:22         ` [virtio-dev] " Michael S. Tsirkin
2017-08-21 20:22         ` [Qemu-devel] " Michael S. Tsirkin
2017-08-21 20:22         ` Michael S. Tsirkin
2017-08-21 20:22       ` Michael S. Tsirkin
2017-08-18  2:22   ` Michael S. Tsirkin
2017-08-19 21:37   ` kbuild test robot
2017-08-19 21:37   ` kbuild test robot
2017-08-19 21:37     ` [Qemu-devel] " kbuild test robot
2017-08-19 21:37     ` kbuild test robot
2017-08-17  3:26 ` [PATCH v14 4/5] mm: support reporting free page blocks Wei Wang
2017-08-17  3:26   ` [virtio-dev] " Wei Wang
2017-08-17  3:26   ` [Qemu-devel] " Wei Wang
2017-08-17  3:26   ` Wei Wang
2017-08-18 13:46   ` Michal Hocko
2017-08-18 13:46     ` [Qemu-devel] " Michal Hocko
2017-08-18 13:46     ` Michal Hocko
2017-08-21  6:12     ` Wei Wang
2017-08-21  6:12     ` Wei Wang
2017-08-21  6:12       ` [virtio-dev] " Wei Wang
2017-08-21  6:12       ` [Qemu-devel] " Wei Wang
2017-08-21  6:12       ` Wei Wang
2017-08-21  6:14       ` Michal Hocko
2017-08-21  6:14         ` [Qemu-devel] " Michal Hocko
2017-08-21  6:14         ` Michal Hocko
2017-08-21  6:14         ` Michal Hocko
2017-08-18 13:46   ` Michal Hocko
2017-08-18 17:23   ` Michael S. Tsirkin
2017-08-18 17:23     ` [virtio-dev] " Michael S. Tsirkin
2017-08-18 17:23     ` [Qemu-devel] " Michael S. Tsirkin
2017-08-18 17:23     ` Michael S. Tsirkin
2017-08-21  6:18     ` Michal Hocko
2017-08-21  6:18       ` [Qemu-devel] " Michal Hocko
2017-08-21  6:18       ` Michal Hocko
2017-08-21  6:18     ` Michal Hocko
2017-08-18 17:23   ` Michael S. Tsirkin
2017-08-17  3:26 ` Wei Wang
2017-08-17  3:26 ` [PATCH v14 5/5] virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_VQ Wei Wang
2017-08-17  3:26 ` Wei Wang
2017-08-17  3:26   ` [virtio-dev] " Wei Wang
2017-08-17  3:26   ` [Qemu-devel] " Wei Wang
2017-08-17  3:26   ` Wei Wang
2017-08-18  2:13   ` Michael S. Tsirkin
2017-08-18  2:13   ` Michael S. Tsirkin
2017-08-18  2:13     ` [virtio-dev] " Michael S. Tsirkin
2017-08-18  2:13     ` [Qemu-devel] " Michael S. Tsirkin
2017-08-18  2:13     ` Michael S. Tsirkin
2017-08-18  8:41     ` Wei Wang
2017-08-18  8:41     ` Wei Wang
2017-08-18  8:41       ` [virtio-dev] " Wei Wang
2017-08-18  8:41       ` [Qemu-devel] " Wei Wang
2017-08-18  8:41       ` Wei Wang
2017-08-18 18:26       ` Michael S. Tsirkin
2017-08-18 18:26         ` [virtio-dev] " Michael S. Tsirkin
2017-08-18 18:26         ` [Qemu-devel] " Michael S. Tsirkin
2017-08-18 18:26         ` Michael S. Tsirkin
2017-08-21  5:21         ` Wei Wang
2017-08-21  5:21           ` [virtio-dev] " Wei Wang
2017-08-21  5:21           ` [Qemu-devel] " Wei Wang
2017-08-21  5:21           ` Wei Wang
2017-08-21  5:21         ` Wei Wang
2017-08-18 18:26       ` Michael S. Tsirkin
2017-08-18  2:28   ` Michael S. Tsirkin
2017-08-18  2:28     ` [virtio-dev] " Michael S. Tsirkin
2017-08-18  2:28     ` [Qemu-devel] " Michael S. Tsirkin
2017-08-18  2:28     ` Michael S. Tsirkin
2017-08-18  8:36     ` Wei Wang
2017-08-18  8:36     ` Wei Wang
2017-08-18  8:36       ` [virtio-dev] " Wei Wang
2017-08-18  8:36       ` [Qemu-devel] " Wei Wang
2017-08-18  8:36       ` Wei Wang
2017-08-18 18:10       ` Michael S. Tsirkin
2017-08-18 18:10         ` [virtio-dev] " Michael S. Tsirkin
2017-08-18 18:10         ` [Qemu-devel] " Michael S. Tsirkin
2017-08-18 18:10         ` Michael S. Tsirkin
2017-08-21  5:28         ` [virtio-dev] " Wei Wang
2017-08-21  5:28         ` Wei Wang
2017-08-21  5:28           ` Wei Wang
2017-08-21  5:28           ` [Qemu-devel] " Wei Wang
2017-08-21  5:28           ` Wei Wang
2017-08-21  5:28           ` Wei Wang
2017-08-18 18:10       ` Michael S. Tsirkin
2017-08-18  2:28   ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170818051451-mutt-send-email-mst@kernel.org \
    --to=mst@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=amit.shah@redhat.com \
    --cc=cornelia.huck@de.ibm.com \
    --cc=david@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=liliang.opensource@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mawilcox@microsoft.com \
    --cc=mgorman@techsingularity.net \
    --cc=mhocko@kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quan.xu@aliyun.com \
    --cc=virtio-dev@lists.oasis-open.org \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=wei.w.wang@intel.com \
    --cc=willy@infradead.org \
    --cc=yang.zhang.wz@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.