* [PATCH] powerpc/44x: mask and shift to zero bug
@ 2017-08-25 10:33 ` Dan Carpenter
0 siblings, 0 replies; 12+ messages in thread
From: Dan Carpenter @ 2017-08-25 10:33 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Matthias Fuchs
Cc: Paul Mackerras, Michael Ellerman, linuxppc-dev, kernel-janitors
My static checker complains that 0x00001800 >> 13 is zero. Looking at
the context, it seems like a copy and paste bug from the line below and
probably 0x3 << 13 or 0x00006000 was intended.
Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Not tested!
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 9d3bd4c45a24..f7da65169124 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
fbdv = 16;
cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
- ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
+ ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH] powerpc/44x: mask and shift to zero bug
@ 2017-08-25 10:33 ` Dan Carpenter
0 siblings, 0 replies; 12+ messages in thread
From: Dan Carpenter @ 2017-08-25 10:33 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Matthias Fuchs
Cc: Paul Mackerras, Michael Ellerman, linuxppc-dev, kernel-janitors
My static checker complains that 0x00001800 >> 13 is zero. Looking at
the context, it seems like a copy and paste bug from the line below and
probably 0x3 << 13 or 0x00006000 was intended.
Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Not tested!
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 9d3bd4c45a24..f7da65169124 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
fbdv = 16;
cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
- ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
+ ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
2017-08-25 10:33 ` Dan Carpenter
@ 2017-08-27 4:56 ` Benjamin Herrenschmidt
-1 siblings, 0 replies; 12+ messages in thread
From: Benjamin Herrenschmidt @ 2017-08-27 4:56 UTC (permalink / raw)
To: Dan Carpenter, Matthias Fuchs
Cc: Paul Mackerras, Michael Ellerman, linuxppc-dev, kernel-janitors
On Fri, 2017-08-25 at 13:33 +0300, Dan Carpenter wrote:
> My static checker complains that 0x00001800 >> 13 is zero. Looking at
> the context, it seems like a copy and paste bug from the line below and
> probably 0x3 << 13 or 0x00006000 was intended.
>
> Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> Not tested!
>
> diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
> index 9d3bd4c45a24..f7da65169124 100644
> --- a/arch/powerpc/boot/4xx.c
> +++ b/arch/powerpc/boot/4xx.c
> @@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
> fbdv = 16;
> cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
> opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
> - ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
> + ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
> epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
> udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
That rings a bell... Is this something we tried to fix before and had
problems ? The thing is when I opened the 405GP and EP manual PDF,
evince had memorized that this register was the last page I looked at
:-) And I don't remember how many years ago that is.
According to the 405gp spec ppdv is IBM bits 17,18 so your patch is
correct.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
@ 2017-08-27 4:56 ` Benjamin Herrenschmidt
0 siblings, 0 replies; 12+ messages in thread
From: Benjamin Herrenschmidt @ 2017-08-27 4:56 UTC (permalink / raw)
To: Dan Carpenter, Matthias Fuchs
Cc: Paul Mackerras, Michael Ellerman, linuxppc-dev, kernel-janitors
On Fri, 2017-08-25 at 13:33 +0300, Dan Carpenter wrote:
> My static checker complains that 0x00001800 >> 13 is zero. Looking at
> the context, it seems like a copy and paste bug from the line below and
> probably 0x3 << 13 or 0x00006000 was intended.
>
> Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> Not tested!
>
> diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
> index 9d3bd4c45a24..f7da65169124 100644
> --- a/arch/powerpc/boot/4xx.c
> +++ b/arch/powerpc/boot/4xx.c
> @@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
> fbdv = 16;
> cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
> opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
> - ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
> + ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
> epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
> udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
That rings a bell... Is this something we tried to fix before and had
problems ? The thing is when I opened the 405GP and EP manual PDF,
evince had memorized that this register was the last page I looked at
:-) And I don't remember how many years ago that is.
According to the 405gp spec ppdv is IBM bits 17,18 so your patch is
correct.
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
2017-08-27 4:56 ` Benjamin Herrenschmidt
@ 2017-08-28 7:57 ` Dan Carpenter
-1 siblings, 0 replies; 12+ messages in thread
From: Dan Carpenter @ 2017-08-28 7:57 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Matthias Fuchs, Paul Mackerras, Michael Ellerman, linuxppc-dev,
kernel-janitors
On Sun, Aug 27, 2017 at 02:56:31PM +1000, Benjamin Herrenschmidt wrote:
> On Fri, 2017-08-25 at 13:33 +0300, Dan Carpenter wrote:
> > My static checker complains that 0x00001800 >> 13 is zero. Looking at
> > the context, it seems like a copy and paste bug from the line below and
> > probably 0x3 << 13 or 0x00006000 was intended.
> >
> > Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > ---
> > Not tested!
> >
> > diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
> > index 9d3bd4c45a24..f7da65169124 100644
> > --- a/arch/powerpc/boot/4xx.c
> > +++ b/arch/powerpc/boot/4xx.c
> > @@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
> > fbdv = 16;
> > cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
> > opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
> > - ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
> > + ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
> > epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
> > udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
>
> That rings a bell... Is this something we tried to fix before and had
> problems ? The thing is when I opened the 405GP and EP manual PDF,
> evince had memorized that this register was the last page I looked at
> :-) And I don't remember how many years ago that is.
>
> According to the 405gp spec ppdv is IBM bits 17,18 so your patch is
> correct.
>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Hm... I did a search through my mailbox and you're right we discussed
this before.
[bug report] [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper
I sent this email during kernel summit and neither of us could send a
patch at the time and we both problem forgot. I definitely forgot.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
@ 2017-08-28 7:57 ` Dan Carpenter
0 siblings, 0 replies; 12+ messages in thread
From: Dan Carpenter @ 2017-08-28 7:57 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Matthias Fuchs, Paul Mackerras, Michael Ellerman, linuxppc-dev,
kernel-janitors
On Sun, Aug 27, 2017 at 02:56:31PM +1000, Benjamin Herrenschmidt wrote:
> On Fri, 2017-08-25 at 13:33 +0300, Dan Carpenter wrote:
> > My static checker complains that 0x00001800 >> 13 is zero. Looking at
> > the context, it seems like a copy and paste bug from the line below and
> > probably 0x3 << 13 or 0x00006000 was intended.
> >
> > Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > ---
> > Not tested!
> >
> > diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
> > index 9d3bd4c45a24..f7da65169124 100644
> > --- a/arch/powerpc/boot/4xx.c
> > +++ b/arch/powerpc/boot/4xx.c
> > @@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
> > fbdv = 16;
> > cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
> > opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
> > - ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
> > + ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
> > epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
> > udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
>
> That rings a bell... Is this something we tried to fix before and had
> problems ? The thing is when I opened the 405GP and EP manual PDF,
> evince had memorized that this register was the last page I looked at
> :-) And I don't remember how many years ago that is.
>
> According to the 405gp spec ppdv is IBM bits 17,18 so your patch is
> correct.
>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Hm... I did a search through my mailbox and you're right we discussed
this before.
[bug report] [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper
I sent this email during kernel summit and neither of us could send a
patch at the time and we both problem forgot. I definitely forgot.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
2017-08-28 7:57 ` Dan Carpenter
@ 2017-08-28 8:36 ` Dan Carpenter
-1 siblings, 0 replies; 12+ messages in thread
From: Dan Carpenter @ 2017-08-28 8:36 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Matthias Fuchs, Paul Mackerras, Michael Ellerman, linuxppc-dev,
kernel-janitors
On Mon, Aug 28, 2017 at 10:57:05AM +0300, Dan Carpenter wrote:
> I sent this email during kernel summit and neither of us could send a
> patch at the time and we both problem forgot. I definitely forgot.
>
s/problem/probably/... I suck at email. :(
regards,
dan carpenter
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
@ 2017-08-28 8:36 ` Dan Carpenter
0 siblings, 0 replies; 12+ messages in thread
From: Dan Carpenter @ 2017-08-28 8:36 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Matthias Fuchs, Paul Mackerras, Michael Ellerman, linuxppc-dev,
kernel-janitors
On Mon, Aug 28, 2017 at 10:57:05AM +0300, Dan Carpenter wrote:
> I sent this email during kernel summit and neither of us could send a
> patch at the time and we both problem forgot. I definitely forgot.
>
s/problem/probably/... I suck at email. :(
regards,
dan carpenter
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
2017-08-28 7:57 ` Dan Carpenter
@ 2017-08-28 11:19 ` Michael Ellerman
-1 siblings, 0 replies; 12+ messages in thread
From: Michael Ellerman @ 2017-08-28 11:19 UTC (permalink / raw)
To: Dan Carpenter, Benjamin Herrenschmidt
Cc: Matthias Fuchs, Paul Mackerras, linuxppc-dev, kernel-janitors
Dan Carpenter <dan.carpenter@oracle.com> writes:
> On Sun, Aug 27, 2017 at 02:56:31PM +1000, Benjamin Herrenschmidt wrote:
>> On Fri, 2017-08-25 at 13:33 +0300, Dan Carpenter wrote:
>> > My static checker complains that 0x00001800 >> 13 is zero. Looking at
>> > the context, it seems like a copy and paste bug from the line below and
>> > probably 0x3 << 13 or 0x00006000 was intended.
>> >
>> > Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
>> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>> > ---
>> > Not tested!
>> >
>> > diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
>> > index 9d3bd4c45a24..f7da65169124 100644
>> > --- a/arch/powerpc/boot/4xx.c
>> > +++ b/arch/powerpc/boot/4xx.c
>> > @@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
>> > fbdv = 16;
>> > cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
>> > opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
>> > - ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
>> > + ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
>> > epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
>> > udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
>>
>> That rings a bell... Is this something we tried to fix before and had
>> problems ? The thing is when I opened the 405GP and EP manual PDF,
>> evince had memorized that this register was the last page I looked at
>> :-) And I don't remember how many years ago that is.
>>
>> According to the 405gp spec ppdv is IBM bits 17,18 so your patch is
>> correct.
>>
>> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>
> Hm... I did a search through my mailbox and you're right we discussed
> this before.
>
> [bug report] [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper
>
> I sent this email during kernel summit and neither of us could send a
> patch at the time and we both problem forgot. I definitely forgot.
If you send a patch with the report, like you did this time, then it
will be remembered in patchwork. That doesn't mean we won't forget it,
but it makes is *less likely* we'll forget it :)
http://patchwork.ozlabs.org/project/linuxppc-dev/list/?submitter“27&state=%2A&archive=both
cheers
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/44x: mask and shift to zero bug
@ 2017-08-28 11:19 ` Michael Ellerman
0 siblings, 0 replies; 12+ messages in thread
From: Michael Ellerman @ 2017-08-28 11:19 UTC (permalink / raw)
To: Dan Carpenter, Benjamin Herrenschmidt
Cc: Matthias Fuchs, Paul Mackerras, linuxppc-dev, kernel-janitors
Dan Carpenter <dan.carpenter@oracle.com> writes:
> On Sun, Aug 27, 2017 at 02:56:31PM +1000, Benjamin Herrenschmidt wrote:
>> On Fri, 2017-08-25 at 13:33 +0300, Dan Carpenter wrote:
>> > My static checker complains that 0x00001800 >> 13 is zero. Looking at
>> > the context, it seems like a copy and paste bug from the line below and
>> > probably 0x3 << 13 or 0x00006000 was intended.
>> >
>> > Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
>> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>> > ---
>> > Not tested!
>> >
>> > diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
>> > index 9d3bd4c45a24..f7da65169124 100644
>> > --- a/arch/powerpc/boot/4xx.c
>> > +++ b/arch/powerpc/boot/4xx.c
>> > @@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
>> > fbdv = 16;
>> > cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
>> > opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
>> > - ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
>> > + ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
>> > epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
>> > udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
>>
>> That rings a bell... Is this something we tried to fix before and had
>> problems ? The thing is when I opened the 405GP and EP manual PDF,
>> evince had memorized that this register was the last page I looked at
>> :-) And I don't remember how many years ago that is.
>>
>> According to the 405gp spec ppdv is IBM bits 17,18 so your patch is
>> correct.
>>
>> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>
> Hm... I did a search through my mailbox and you're right we discussed
> this before.
>
> [bug report] [POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper
>
> I sent this email during kernel summit and neither of us could send a
> patch at the time and we both problem forgot. I definitely forgot.
If you send a patch with the report, like you did this time, then it
will be remembered in patchwork. That doesn't mean we won't forget it,
but it makes is *less likely* we'll forget it :)
http://patchwork.ozlabs.org/project/linuxppc-dev/list/?submitter=9327&state=%2A&archive=both
cheers
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: powerpc/44x: mask and shift to zero bug
2017-08-25 10:33 ` Dan Carpenter
@ 2017-08-31 11:36 ` Michael Ellerman
-1 siblings, 0 replies; 12+ messages in thread
From: Michael Ellerman @ 2017-08-31 11:36 UTC (permalink / raw)
To: Dan Carpenter, Benjamin Herrenschmidt, Matthias Fuchs
Cc: kernel-janitors, Paul Mackerras, linuxppc-dev
On Fri, 2017-08-25 at 10:33:40 UTC, Dan Carpenter wrote:
> My static checker complains that 0x00001800 >> 13 is zero. Looking at
> the context, it seems like a copy and paste bug from the line below and
> probably 0x3 << 13 or 0x00006000 was intended.
>
> Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/8d046759f6ad75824fdf7b9c9a3da0
cheers
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: powerpc/44x: mask and shift to zero bug
@ 2017-08-31 11:36 ` Michael Ellerman
0 siblings, 0 replies; 12+ messages in thread
From: Michael Ellerman @ 2017-08-31 11:36 UTC (permalink / raw)
To: Dan Carpenter, Benjamin Herrenschmidt, Matthias Fuchs
Cc: kernel-janitors, Paul Mackerras, linuxppc-dev
On Fri, 2017-08-25 at 10:33:40 UTC, Dan Carpenter wrote:
> My static checker complains that 0x00001800 >> 13 is zero. Looking at
> the context, it seems like a copy and paste bug from the line below and
> probably 0x3 << 13 or 0x00006000 was intended.
>
> Fixes: 2af59f7d5c3e ("[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapper")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/8d046759f6ad75824fdf7b9c9a3da0
cheers
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-08-31 11:36 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-25 10:33 [PATCH] powerpc/44x: mask and shift to zero bug Dan Carpenter
2017-08-25 10:33 ` Dan Carpenter
2017-08-27 4:56 ` Benjamin Herrenschmidt
2017-08-27 4:56 ` Benjamin Herrenschmidt
2017-08-28 7:57 ` Dan Carpenter
2017-08-28 7:57 ` Dan Carpenter
2017-08-28 8:36 ` Dan Carpenter
2017-08-28 8:36 ` Dan Carpenter
2017-08-28 11:19 ` Michael Ellerman
2017-08-28 11:19 ` Michael Ellerman
2017-08-31 11:36 ` Michael Ellerman
2017-08-31 11:36 ` Michael Ellerman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.