[PATCH v2 1/2] iommu/mediatek: Fix a build fail of m4u_type

[PATCH v2 1/2] iommu/mediatek: Fix a build fail of m4u_type

[Yong Wu]

The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build error:

   drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
>> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
 has no member named 'm4u_type'; did you mean 'm4u_dom'?
     if (data->enable_4GB && data->m4u_type != M4U_MT8173) {

This patch fix it, use "m4u_plat" instead of "m4u_type".

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
1) In the v2 of mt2712 iommu support patch-set, We changed a variant
name from "m4u_type" to "m4u_plat", But I'm sorry that I forgot to
change it in the later patch.
2) This patch is based on [1].
[1]:https://lists.linuxfoundation.org/pipermail/iommu/2017-August/023847.html
3) I cann't find the commit id of the patch ("iommu/mediatek: Enlarge
the validate PA range for 4GB mode") in the [2].
So I don't write the commit id for that patch in the commit message.
[2]https://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git next
---
 drivers/iommu/mtk_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 4f233e1..bc00e40 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -533,7 +533,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 
 	writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
 		       data->base + REG_MMU_IVRP_PADDR);
-	if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
+	if (data->enable_4GB && data->m4u_plat != M4U_MT8173) {
 		/*
 		 * If 4GB mode is enabled, the validate PA range is from
 		 * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
-- 
1.9.1

[PATCH v2 1/2] iommu/mediatek: Fix a build fail of m4u_type

[Yong Wu]

The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build error:

   drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
>> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
 has no member named 'm4u_type'; did you mean 'm4u_dom'?
     if (data->enable_4GB && data->m4u_type != M4U_MT8173) {

This patch fix it, use "m4u_plat" instead of "m4u_type".

Reported-by: kernel test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
1) In the v2 of mt2712 iommu support patch-set, We changed a variant
name from "m4u_type" to "m4u_plat", But I'm sorry that I forgot to
change it in the later patch.
2) This patch is based on [1].
[1]:https://lists.linuxfoundation.org/pipermail/iommu/2017-August/023847.html
3) I cann't find the commit id of the patch ("iommu/mediatek: Enlarge
the validate PA range for 4GB mode") in the [2].
So I don't write the commit id for that patch in the commit message.
[2]https://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git next
---
 drivers/iommu/mtk_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 4f233e1..bc00e40 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -533,7 +533,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 
 	writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
 		       data->base + REG_MMU_IVRP_PADDR);
-	if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
+	if (data->enable_4GB && data->m4u_plat != M4U_MT8173) {
 		/*
 		 * If 4GB mode is enabled, the validate PA range is from
 		 * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
-- 
1.9.1

[PATCH v2 1/2] iommu/mediatek: Fix a build fail of m4u_type

[Yong Wu]

The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build error:

   drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
>> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
 has no member named 'm4u_type'; did you mean 'm4u_dom'?
     if (data->enable_4GB && data->m4u_type != M4U_MT8173) {

This patch fix it, use "m4u_plat" instead of "m4u_type".

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
1) In the v2 of mt2712 iommu support patch-set, We changed a variant
name from "m4u_type" to "m4u_plat", But I'm sorry that I forgot to
change it in the later patch.
2) This patch is based on [1].
[1]:https://lists.linuxfoundation.org/pipermail/iommu/2017-August/023847.html
3) I cann't find the commit id of the patch ("iommu/mediatek: Enlarge
the validate PA range for 4GB mode") in the [2].
So I don't write the commit id for that patch in the commit message.
[2]https://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git next
---
 drivers/iommu/mtk_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 4f233e1..bc00e40 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -533,7 +533,7 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 
 	writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB),
 		       data->base + REG_MMU_IVRP_PADDR);
-	if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
+	if (data->enable_4GB && data->m4u_plat != M4U_MT8173) {
 		/*
 		 * If 4GB mode is enabled, the validate PA range is from
 		 * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
-- 
1.9.1

[PATCH v2 2/2] iommu/mediatek: Fix a build warning of BIT(32) in ARM

[Yong Wu]

The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build warning while ARCH=arm:

   drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_iova_to_phys':
   include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
    #define BIT(nr)   (1UL << (nr))
                           ^
>> drivers/iommu/mtk_iommu.c:407:9: note: in expansion of macro 'BIT'
      pa |= BIT(32);

  drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_probe':
   include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
    #define BIT(nr)   (1UL << (nr))
                           ^
   drivers/iommu/mtk_iommu.c:589:35: note: in expansion of macro 'BIT'
     data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));

Use BIT_ULL instead of BIT.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index bc00e40..bd515be 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -404,7 +404,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
 	spin_unlock_irqrestore(&dom->pgtlock, flags);
 
 	if (data->enable_4GB)
-		pa |= BIT(32);
+		pa |= BIT_ULL(32);
 
 	return pa;
 }
@@ -586,7 +586,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 	data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
 
 	/* Whether the current dram is over 4GB */
-	data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));
+	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->base = devm_ioremap_resource(dev, res);
-- 
1.9.1

[PATCH v2 2/2] iommu/mediatek: Fix a build warning of BIT(32) in ARM

[Yong Wu]

The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build warning while ARCH=arm:

   drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_iova_to_phys':
   include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
    #define BIT(nr)   (1UL << (nr))
                           ^
>> drivers/iommu/mtk_iommu.c:407:9: note: in expansion of macro 'BIT'
      pa |= BIT(32);

  drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_probe':
   include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
    #define BIT(nr)   (1UL << (nr))
                           ^
   drivers/iommu/mtk_iommu.c:589:35: note: in expansion of macro 'BIT'
     data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));

Use BIT_ULL instead of BIT.

Reported-by: kernel test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/iommu/mtk_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index bc00e40..bd515be 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -404,7 +404,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
 	spin_unlock_irqrestore(&dom->pgtlock, flags);
 
 	if (data->enable_4GB)
-		pa |= BIT(32);
+		pa |= BIT_ULL(32);
 
 	return pa;
 }
@@ -586,7 +586,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 	data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
 
 	/* Whether the current dram is over 4GB */
-	data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));
+	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->base = devm_ioremap_resource(dev, res);
-- 
1.9.1

[PATCH v2 2/2] iommu/mediatek: Fix a build warning of BIT(32) in ARM

[Yong Wu]

The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build warning while ARCH=arm:

   drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_iova_to_phys':
   include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
    #define BIT(nr)   (1UL << (nr))
                           ^
>> drivers/iommu/mtk_iommu.c:407:9: note: in expansion of macro 'BIT'
      pa |= BIT(32);

  drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_probe':
   include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
    #define BIT(nr)   (1UL << (nr))
                           ^
   drivers/iommu/mtk_iommu.c:589:35: note: in expansion of macro 'BIT'
     data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));

Use BIT_ULL instead of BIT.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index bc00e40..bd515be 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -404,7 +404,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
 	spin_unlock_irqrestore(&dom->pgtlock, flags);
 
 	if (data->enable_4GB)
-		pa |= BIT(32);
+		pa |= BIT_ULL(32);
 
 	return pa;
 }
@@ -586,7 +586,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
 	data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
 
 	/* Whether the current dram is over 4GB */
-	data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));
+	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->base = devm_ioremap_resource(dev, res);
-- 
1.9.1

Re: [PATCH v2 1/2] iommu/mediatek: Fix a build fail of m4u_type

[Joerg Roedel]

On Thu, Aug 24, 2017 at 03:42:11PM +0800, Yong Wu wrote:
> The commit ("iommu/mediatek: Enlarge the validate PA range
> for 4GB mode") introduce the following build error:
> 
>    drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
> >> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
>  has no member named 'm4u_type'; did you mean 'm4u_dom'?
>      if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
> 
> This patch fix it, use "m4u_plat" instead of "m4u_type".
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>

Applied both, thanks.

Re: [PATCH v2 1/2] iommu/mediatek: Fix a build fail of m4u_type

[Joerg Roedel]

On Thu, Aug 24, 2017 at 03:42:11PM +0800, Yong Wu wrote:
> The commit ("iommu/mediatek: Enlarge the validate PA range
> for 4GB mode") introduce the following build error:
> 
>    drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
> >> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
>  has no member named 'm4u_type'; did you mean 'm4u_dom'?
>      if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
> 
> This patch fix it, use "m4u_plat" instead of "m4u_type".
> 
> Reported-by: kernel test robot <lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>

Applied both, thanks.

[PATCH v2 1/2] iommu/mediatek: Fix a build fail of m4u_type

[Joerg Roedel]

On Thu, Aug 24, 2017 at 03:42:11PM +0800, Yong Wu wrote:
> The commit ("iommu/mediatek: Enlarge the validate PA range
> for 4GB mode") introduce the following build error:
> 
>    drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
> >> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
>  has no member named 'm4u_type'; did you mean 'm4u_dom'?
>      if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
> 
> This patch fix it, use "m4u_plat" instead of "m4u_type".
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>

Applied both, thanks.