* [PATCH v2] USB: serial: option: add support for D-Link DWM-157 C1
@ 2017-08-29 19:50 Maciej S. Szmigiero
2017-08-30 7:46 ` Johan Hovold
0 siblings, 1 reply; 2+ messages in thread
From: Maciej S. Szmigiero @ 2017-08-29 19:50 UTC (permalink / raw)
To: Johan Hovold; +Cc: Greg Kroah-Hartman, linux-usb, linux-kernel, stable
This commit adds support (an ID, really) for D-Link DWM-157 hardware
version C1 USB modem to option driver.
According to manufacturer-provided Windows INF file the device has four
serial ports:
"D-Link HSPA+DataCard Diagnostics Interface" (interface 2; modem port),
"D-Link HSPA+DataCard NMEA Device" (interface 3),
"D-Link HSPA+DataCard Speech Port" (interface 4),
"D-Link HSPA+DataCard Debug Port" (interface 5).
usb-devices output:
T: Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2001 ProdID=7d0e Rev=03.00
S: Manufacturer=D-Link,Inc
S: Product=D-Link DWM-157
C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: stable@vger.kernel.org
---
Changes from v1: Match the whole vendor-specific interface class instead
of particular interface subclasses and protocols, add usb-devices output
to the commit message.
drivers/usb/serial/option.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index fe123153b1a5..2a9944326210 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2023,6 +2023,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */
+ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) }, /* D-Link DWM-157 C1 */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] USB: serial: option: add support for D-Link DWM-157 C1
2017-08-29 19:50 [PATCH v2] USB: serial: option: add support for D-Link DWM-157 C1 Maciej S. Szmigiero
@ 2017-08-30 7:46 ` Johan Hovold
0 siblings, 0 replies; 2+ messages in thread
From: Johan Hovold @ 2017-08-30 7:46 UTC (permalink / raw)
To: Maciej S. Szmigiero
Cc: Johan Hovold, Greg Kroah-Hartman, linux-usb, linux-kernel, stable
On Tue, Aug 29, 2017 at 09:50:03PM +0200, Maciej S. Szmigiero wrote:
> This commit adds support (an ID, really) for D-Link DWM-157 hardware
> version C1 USB modem to option driver.
>
> According to manufacturer-provided Windows INF file the device has four
> serial ports:
> "D-Link HSPA+DataCard Diagnostics Interface" (interface 2; modem port),
> "D-Link HSPA+DataCard NMEA Device" (interface 3),
> "D-Link HSPA+DataCard Speech Port" (interface 4),
> "D-Link HSPA+DataCard Debug Port" (interface 5).
>
> usb-devices output:
> T: Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=2001 ProdID=7d0e Rev=03.00
> S: Manufacturer=D-Link,Inc
> S: Product=D-Link DWM-157
> C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
> I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
> I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I: If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
>
> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
> Cc: stable@vger.kernel.org
> ---
> Changes from v1: Match the whole vendor-specific interface class instead
> of particular interface subclasses and protocols, add usb-devices output
> to the commit message.
Thanks for the v2, now applied.
Johan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-08-30 7:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-29 19:50 [PATCH v2] USB: serial: option: add support for D-Link DWM-157 C1 Maciej S. Szmigiero
2017-08-30 7:46 ` Johan Hovold
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.