[U-Boot] [PATCH] arm: mvebu: Remove theadorable_defconfig

[U-Boot] [PATCH] arm: mvebu: Remove theadorable_defconfig

[Stefan Roese]

Currently, we support 2 "theadorable" MVEBU build targets. One with a
stripped down configuration (theadorable) and one with a full blown
configuration (theadorable_debug), including PCI, ethernet etc. When
we introduced these configs, the plan was to remove the debug version
at some point. But now it seems better to keep the full-blown version
and remove the "non-debug" version instead.

At a later stage, I will rename the remaining "theadorable_debug"
target into a more fitting one.

Signed-off-by: Stefan Roese <sr@denx.de>
---
 board/theadorable/MAINTAINERS |  1 -
 configs/theadorable_defconfig | 54 -------------------------------------------
 2 files changed, 55 deletions(-)
 delete mode 100644 configs/theadorable_defconfig

diff --git a/board/theadorable/MAINTAINERS b/board/theadorable/MAINTAINERS
index 5ae6b6487c..1e8df93d37 100644
--- a/board/theadorable/MAINTAINERS
+++ b/board/theadorable/MAINTAINERS
@@ -4,4 +4,3 @@ S:	Maintained
 F:	board/theadorable/
 F:	include/configs/theadorable.h
 F:	configs/theadorable_debug_defconfig
-F:	configs/theadorable_defconfig
diff --git a/configs/theadorable_defconfig b/configs/theadorable_defconfig
deleted file mode 100644
index 0639f81328..0000000000
--- a/configs/theadorable_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_THEADORABLE=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_VIDEO=y
-CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
-CONFIG_DEBUG_UART=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SF=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
-# CONFIG_SPL_PARTITION_UUIDS is not set
-CONFIG_SPL_OF_TRANSLATE=y
-CONFIG_FPGA_ALTERA=y
-CONFIG_DM_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_DEBUG_UART_BASE=0xd0012000
-CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_SYS_NS16550=y
-CONFIG_VIDEO_MVEBU=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_REGEX=y
-CONFIG_LIB_RAND=y
-- 
2.14.1

[U-Boot] [PATCH] arm: mvebu: Remove theadorable_defconfig

[Stefan Roese]

On 30.08.2017 09:55, Stefan Roese wrote:
> Currently, we support 2 "theadorable" MVEBU build targets. One with a
> stripped down configuration (theadorable) and one with a full blown
> configuration (theadorable_debug), including PCI, ethernet etc. When
> we introduced these configs, the plan was to remove the debug version
> at some point. But now it seems better to keep the full-blown version
> and remove the "non-debug" version instead.
> 
> At a later stage, I will rename the remaining "theadorable_debug"
> target into a more fitting one.
> 
> Signed-off-by: Stefan Roese <sr@denx.de>

Applied to u-boot-marvell/master.

Thanks,
Stefan