[pull request][net 00/11] Mellanox, mlx5 fixes 2017-08-30

[pull request][net 00/11] Mellanox, mlx5 fixes 2017-08-30

[Saeed Mahameed]

Hi Dave,

This series contains some misc fixes to the mlx5 driver.

Please pull and let me know if there's any problem.

For -stable:   

Kernels >= 4.12
	net/mlx5e: Fix CQ moderation mode not set properly
	net/mlx5e: Don't override user RSS upon set channels

Kernels >= 4.11
	net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address 

Kernels >= 4.10
	net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap
	net/mlx5e: Check for qos capability in dcbnl_initialize

Kernels >= 4.9
	net/mlx5e: Fix dangling page pointer on DMA mapping error

Kernels >= 4.8
	net/mlx5e: Fix inline header size for small packets
	net/mlx5: E-Switch, Unload the representors in the correct order
    	net/mlx5: Fix arm SRQ command for ISSI version 0


Thanks,
Saeed.

---

The following changes since commit 183db481279437590f75a8a0479d512e5dd597de:

  drivers: net: xgene: Correct probe sequence handling (2017-08-29 16:13:08 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-fixes-2017-08-30

for you to fetch changes up to 1213ad28f9595a08e3877248bbba1a25c40225d6:

  net/mlx5e: Fix CQ moderation mode not set properly (2017-08-30 21:20:43 +0300)

----------------------------------------------------------------
mlx5-fixes-2017-08-30

----------------------------------------------------------------
Eran Ben Elisha (1):
      net/mlx5e: Fix dangling page pointer on DMA mapping error

Huy Nguyen (4):
      net/mlx5e: Check for qos capability in dcbnl_initialize
      net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap.
      net/mlx5: Skip mlx5_unload_one if mlx5_load_one fails
      net/mlx5: Remove the flag MLX5_INTERFACE_STATE_SHUTDOWN

Inbar Karmy (1):
      net/mlx5e: Don't override user RSS upon set channels

Moshe Shemesh (1):
      net/mlx5e: Fix inline header size for small packets

Noa Osherovich (1):
      net/mlx5: Fix arm SRQ command for ISSI version 0

Paul Blakey (1):
      net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address

Shahar Klein (1):
      net/mlx5: E-Switch, Unload the representors in the correct order

Tal Gilboa (1):
      net/mlx5e: Fix CQ moderation mode not set properly

 drivers/net/ethernet/mellanox/mlx5/core/en.h       |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 24 ++++++++++++++--------
 .../net/ethernet/mellanox/mlx5/core/en_ethtool.c   |  6 ++++--
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c    |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |  8 +++-----
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    | 17 ++++++++-------
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |  6 +-----
 drivers/net/ethernet/mellanox/mlx5/core/srq.c      | 12 +++++------
 include/linux/mlx5/driver.h                        |  4 +---
 11 files changed, 44 insertions(+), 39 deletions(-)

[net 01/11] net/mlx5e: Check for qos capability in dcbnl_initialize

[Saeed Mahameed]

From: Huy Nguyen <huyn@mellanox.com>

qos capability is the master capability bit that determines
if the DCBX is supported for the PCI function. If this bit is off,
driver cannot run any dcbx code.

Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 2eb54d36e16e..810b51029c7f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -754,6 +754,9 @@ void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv)
 {
 	struct mlx5e_dcbx *dcbx = &priv->dcbx;
 
+	if (!MLX5_CAP_GEN(priv->mdev, qos))
+		return;
+
 	if (MLX5_CAP_GEN(priv->mdev, dcbx))
 		mlx5e_dcbnl_query_dcbx_mode(priv, &dcbx->mode);
 
-- 
2.13.0

[net 02/11] net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap.

[Saeed Mahameed]

From: Huy Nguyen <huyn@mellanox.com>

Current code doesn't report DCB_CAP_DCBX_HOST capability when query
through getcap. User space lldptool expects capability to have HOST mode
set when it wants to configure DCBX CEE mode. In absence of HOST mode
capability, lldptool fails to switch to CEE mode.

This fix returns DCB_CAP_DCBX_HOST capability when port's DCBX
controlled mode is under software control.

Fixes: 3a6a931dfb8e ("net/mlx5e: Support DCBX CEE API")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 21 ++++++++++++---------
 2 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 0039b4725405..2f26fb34d741 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -263,6 +263,7 @@ struct mlx5e_dcbx {
 
 	/* The only setting that cannot be read from FW */
 	u8                         tc_tsa[IEEE_8021QAZ_MAX_TCS];
+	u8                         cap;
 };
 #endif
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
index 810b51029c7f..c1d384fca4dc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c
@@ -288,13 +288,8 @@ static int mlx5e_dcbnl_ieee_setpfc(struct net_device *dev,
 static u8 mlx5e_dcbnl_getdcbx(struct net_device *dev)
 {
 	struct mlx5e_priv *priv = netdev_priv(dev);
-	struct mlx5e_dcbx *dcbx = &priv->dcbx;
-	u8 mode = DCB_CAP_DCBX_VER_IEEE | DCB_CAP_DCBX_VER_CEE;
-
-	if (dcbx->mode == MLX5E_DCBX_PARAM_VER_OPER_HOST)
-		mode |= DCB_CAP_DCBX_HOST;
 
-	return mode;
+	return priv->dcbx.cap;
 }
 
 static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode)
@@ -312,6 +307,7 @@ static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode)
 		/* set dcbx to fw controlled */
 		if (!mlx5e_dcbnl_set_dcbx_mode(priv, MLX5E_DCBX_PARAM_VER_OPER_AUTO)) {
 			dcbx->mode = MLX5E_DCBX_PARAM_VER_OPER_AUTO;
+			dcbx->cap &= ~DCB_CAP_DCBX_HOST;
 			return 0;
 		}
 
@@ -324,6 +320,8 @@ static u8 mlx5e_dcbnl_setdcbx(struct net_device *dev, u8 mode)
 	if (mlx5e_dcbnl_switch_to_host_mode(netdev_priv(dev)))
 		return 1;
 
+	dcbx->cap = mode;
+
 	return 0;
 }
 
@@ -628,9 +626,9 @@ static u8 mlx5e_dcbnl_getcap(struct net_device *netdev,
 		*cap = false;
 		break;
 	case DCB_CAP_ATTR_DCBX:
-		*cap = (DCB_CAP_DCBX_LLD_MANAGED |
-			DCB_CAP_DCBX_VER_CEE |
-			DCB_CAP_DCBX_STATIC);
+		*cap = priv->dcbx.cap |
+		       DCB_CAP_DCBX_VER_CEE |
+		       DCB_CAP_DCBX_VER_IEEE;
 		break;
 	default:
 		*cap = 0;
@@ -760,5 +758,10 @@ void mlx5e_dcbnl_initialize(struct mlx5e_priv *priv)
 	if (MLX5_CAP_GEN(priv->mdev, dcbx))
 		mlx5e_dcbnl_query_dcbx_mode(priv, &dcbx->mode);
 
+	priv->dcbx.cap = DCB_CAP_DCBX_VER_CEE |
+			 DCB_CAP_DCBX_VER_IEEE;
+	if (priv->dcbx.mode == MLX5E_DCBX_PARAM_VER_OPER_HOST)
+		priv->dcbx.cap |= DCB_CAP_DCBX_HOST;
+
 	mlx5e_ets_init(priv);
 }
-- 
2.13.0

[net 03/11] net/mlx5: Fix arm SRQ command for ISSI version 0

[Saeed Mahameed]

From: Noa Osherovich <noaos@mellanox.com>

Support for ISSI version 0 was recently broken as the arm_srq_cmd
command, which is used only for ISSI version 0, was given the opcode
for ISSI version 1 instead of ISSI version 0.

Change arm_srq_cmd to use the correct command opcode for ISSI version
0.

Fixes: af1ba291c5e4 ('{net, IB}/mlx5: Refactor internal SRQ API')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/srq.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/srq.c b/drivers/net/ethernet/mellanox/mlx5/core/srq.c
index f774de6f5fcb..520f6382dfde 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/srq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/srq.c
@@ -201,13 +201,13 @@ static int destroy_srq_cmd(struct mlx5_core_dev *dev,
 static int arm_srq_cmd(struct mlx5_core_dev *dev, struct mlx5_core_srq *srq,
 		       u16 lwm, int is_srq)
 {
-	/* arm_srq structs missing using identical xrc ones */
-	u32 srq_in[MLX5_ST_SZ_DW(arm_xrc_srq_in)] = {0};
-	u32 srq_out[MLX5_ST_SZ_DW(arm_xrc_srq_out)] = {0};
+	u32 srq_in[MLX5_ST_SZ_DW(arm_rq_in)] = {0};
+	u32 srq_out[MLX5_ST_SZ_DW(arm_rq_out)] = {0};
 
-	MLX5_SET(arm_xrc_srq_in, srq_in, opcode,   MLX5_CMD_OP_ARM_XRC_SRQ);
-	MLX5_SET(arm_xrc_srq_in, srq_in, xrc_srqn, srq->srqn);
-	MLX5_SET(arm_xrc_srq_in, srq_in, lwm,      lwm);
+	MLX5_SET(arm_rq_in, srq_in, opcode, MLX5_CMD_OP_ARM_RQ);
+	MLX5_SET(arm_rq_in, srq_in, op_mod, MLX5_ARM_RQ_IN_OP_MOD_SRQ);
+	MLX5_SET(arm_rq_in, srq_in, srq_number, srq->srqn);
+	MLX5_SET(arm_rq_in, srq_in, lwm,      lwm);
 
 	return  mlx5_cmd_exec(dev, srq_in, sizeof(srq_in),
 			      srq_out, sizeof(srq_out));
-- 
2.13.0

[net 04/11] net/mlx5: Skip mlx5_unload_one if mlx5_load_one fails

[Saeed Mahameed]

From: Huy Nguyen <huyn@mellanox.com>

There is an issue where the firmware fails during mlx5_load_one,
the health_care timer detects the issue and schedules a health_care call.
Then the mlx5_load_one detects the issue, cleans up and quits. Then
the health_care starts and calls mlx5_unload_one to clean up the resources
that no longer exist and causes kernel panic.

The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
after mlx5_load_one fails. The solution is removing the bit
MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
is redundant and we can use MLX5_INTERFACE_STATE_UP instead.

Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 4 +---
 include/linux/mlx5/driver.h                    | 5 ++---
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index c065132b956d..4cdb414aa2d5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1186,7 +1186,6 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv,
 		}
 	}
 
-	clear_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state);
 	set_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state);
 out:
 	mutex_unlock(&dev->intf_state_mutex);
@@ -1261,7 +1260,7 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv,
 		mlx5_drain_health_recovery(dev);
 
 	mutex_lock(&dev->intf_state_mutex);
-	if (test_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state)) {
+	if (!test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) {
 		dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n",
 			 __func__);
 		if (cleanup)
@@ -1270,7 +1269,6 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv,
 	}
 
 	clear_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state);
-	set_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state);
 
 	if (mlx5_device_registered(dev))
 		mlx5_detach_device(dev);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index df6ce59a1f95..918f5e644506 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -673,9 +673,8 @@ enum mlx5_device_state {
 };
 
 enum mlx5_interface_state {
-	MLX5_INTERFACE_STATE_DOWN = BIT(0),
-	MLX5_INTERFACE_STATE_UP = BIT(1),
-	MLX5_INTERFACE_STATE_SHUTDOWN = BIT(2),
+	MLX5_INTERFACE_STATE_UP = BIT(0),
+	MLX5_INTERFACE_STATE_SHUTDOWN = BIT(1),
 };
 
 enum mlx5_pci_status {
-- 
2.13.0

[net 05/11] net/mlx5: Remove the flag MLX5_INTERFACE_STATE_SHUTDOWN

[Saeed Mahameed]

From: Huy Nguyen <huyn@mellanox.com>

MLX5_INTERFACE_STATE_SHUTDOWN is not used in the code.

Fixes: 5fc7197d3a25 ("net/mlx5: Add pci shutdown callback")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 --
 include/linux/mlx5/driver.h                    | 1 -
 2 files changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 4cdb414aa2d5..16885827367b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1563,8 +1563,6 @@ static void shutdown(struct pci_dev *pdev)
 	int err;
 
 	dev_info(&pdev->dev, "Shutdown was called\n");
-	/* Notify mlx5 clients that the kernel is being shut down */
-	set_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &dev->intf_state);
 	err = mlx5_try_fast_unload(dev);
 	if (err)
 		mlx5_unload_one(dev, priv, false);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 918f5e644506..205d82d4c468 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -674,7 +674,6 @@ enum mlx5_device_state {
 
 enum mlx5_interface_state {
 	MLX5_INTERFACE_STATE_UP = BIT(0),
-	MLX5_INTERFACE_STATE_SHUTDOWN = BIT(1),
 };
 
 enum mlx5_pci_status {
-- 
2.13.0

[net 06/11] net/mlx5e: Fix dangling page pointer on DMA mapping error

[Saeed Mahameed]

From: Eran Ben Elisha <eranbe@mellanox.com>

Function mlx5e_dealloc_rx_wqe is using page pointer value as an
indication to valid DMA mapping. In case that the mapping failed, we
released the page but kept the dangling pointer. Store the page pointer
only after the DMA mapping passed to avoid invalid page DMA unmap.

Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 325b2c8c1c6d..7344433259fc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -222,13 +222,13 @@ static inline int mlx5e_page_alloc_mapped(struct mlx5e_rq *rq,
 	if (unlikely(!page))
 		return -ENOMEM;
 
-	dma_info->page = page;
 	dma_info->addr = dma_map_page(rq->pdev, page, 0,
 				      RQ_PAGE_SIZE(rq), rq->buff.map_dir);
 	if (unlikely(dma_mapping_error(rq->pdev, dma_info->addr))) {
 		put_page(page);
 		return -ENOMEM;
 	}
+	dma_info->page = page;
 
 	return 0;
 }
-- 
2.13.0

[net 07/11] net/mlx5e: Don't override user RSS upon set channels

[Saeed Mahameed]

From: Inbar Karmy <inbark@mellanox.com>

Currently, increasing the number of combined channels is changing
the RSS spread to use the new created channels.
Prevent the RSS spread change in case the user explicitly declare it,
to avoid overriding user configuration.

Tested:
when RSS default:

# ethtool -L ens8 combined 4
RSS spread will change and point to 4 channels.

# ethtool -X ens8 equal 4
# ethtool -L ens8 combined 6
RSS will not change after increasing the number of the channels.

Fixes: 8bf368620486 ('ethtool: ensure channel counts are within bounds during SCHANNELS')
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 917fade5f5d5..f5594014715b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -641,8 +641,10 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv,
 
 	new_channels.params = priv->channels.params;
 	new_channels.params.num_channels = count;
-	mlx5e_build_default_indir_rqt(priv->mdev, new_channels.params.indirection_rqt,
-				      MLX5E_INDIR_RQT_SIZE, count);
+	if (!netif_is_rxfh_configured(priv->netdev))
+		mlx5e_build_default_indir_rqt(priv->mdev,
+					      new_channels.params.indirection_rqt,
+					      MLX5E_INDIR_RQT_SIZE, count);
 
 	if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
 		priv->channels.params = new_channels.params;
-- 
2.13.0

[net 08/11] net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address

[Saeed Mahameed]

From: Paul Blakey <paulb@mellanox.com>

Currently if vxlan tunnel ipv6 src isn't supplied the driver fails to
resolve it as part of the route lookup. The resulting encap header
is left with a zeroed out ipv6 src address so the packets are sent
with this src ip.

Use an appropriate route lookup API that also resolves the source
ipv6 address if it's not supplied.

Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 3c536f560dd2..7f282e8f4e7f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -1443,12 +1443,10 @@ static int mlx5e_route_lookup_ipv6(struct mlx5e_priv *priv,
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
 	int ret;
 
-	dst = ip6_route_output(dev_net(mirred_dev), NULL, fl6);
-	ret = dst->error;
-	if (ret) {
-		dst_release(dst);
+	ret = ipv6_stub->ipv6_dst_lookup(dev_net(mirred_dev), NULL, &dst,
+					 fl6);
+	if (ret < 0)
 		return ret;
-	}
 
 	*out_ttl = ip6_dst_hoplimit(dst);
 
-- 
2.13.0

[net 09/11] net/mlx5: E-Switch, Unload the representors in the correct order

[Saeed Mahameed]

From: Shahar Klein <shahark@mellanox.com>

When changing from switchdev to legacy mode, all the representor port
devices (uplink nic and reps) are cleaned up. Part of this cleaning
process is removing the neigh entries and the hash table containing them.
However, a representor neigh entry might be linked to the uplink port
hash table and if the uplink nic is cleaned first the cleaning of the
representor will end up in null deref.
Fix that by unloading the representors in the opposite order of load.

Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 95b64025ce36..5bc0593bd76e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -815,7 +815,7 @@ void esw_offloads_cleanup(struct mlx5_eswitch *esw, int nvports)
 	struct mlx5_eswitch_rep *rep;
 	int vport;
 
-	for (vport = 0; vport < nvports; vport++) {
+	for (vport = nvports - 1; vport >= 0; vport--) {
 		rep = &esw->offloads.vport_reps[vport];
 		if (!rep->valid)
 			continue;
-- 
2.13.0

[net 10/11] net/mlx5e: Fix inline header size for small packets

[Saeed Mahameed]

From: Moshe Shemesh <moshe@mellanox.com>

Fix inline header size, make sure it is not greater than skb len.
This bug effects small packets, for example L2 packets with size < 18.

Fixes: ae76715d153e ("net/mlx5e: Check the minimum inline header mode before xmit")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index aaa0f4ebba9a..31353e5c3c78 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -128,10 +128,10 @@ static inline int mlx5e_skb_l3_header_offset(struct sk_buff *skb)
 		return mlx5e_skb_l2_header_offset(skb);
 }
 
-static inline unsigned int mlx5e_calc_min_inline(enum mlx5_inline_modes mode,
-						 struct sk_buff *skb)
+static inline u16 mlx5e_calc_min_inline(enum mlx5_inline_modes mode,
+					struct sk_buff *skb)
 {
-	int hlen;
+	u16 hlen;
 
 	switch (mode) {
 	case MLX5_INLINE_MODE_NONE:
@@ -140,19 +140,22 @@ static inline unsigned int mlx5e_calc_min_inline(enum mlx5_inline_modes mode,
 		hlen = eth_get_headlen(skb->data, skb_headlen(skb));
 		if (hlen == ETH_HLEN && !skb_vlan_tag_present(skb))
 			hlen += VLAN_HLEN;
-		return hlen;
+		break;
 	case MLX5_INLINE_MODE_IP:
 		/* When transport header is set to zero, it means no transport
 		 * header. When transport header is set to 0xff's, it means
 		 * transport header wasn't set.
 		 */
-		if (skb_transport_offset(skb))
-			return mlx5e_skb_l3_header_offset(skb);
+		if (skb_transport_offset(skb)) {
+			hlen = mlx5e_skb_l3_header_offset(skb);
+			break;
+		}
 		/* fall through */
 	case MLX5_INLINE_MODE_L2:
 	default:
-		return mlx5e_skb_l2_header_offset(skb);
+		hlen = mlx5e_skb_l2_header_offset(skb);
 	}
+	return min_t(u16, hlen, skb->len);
 }
 
 static inline void mlx5e_tx_skb_pull_inline(unsigned char **skb_data,
-- 
2.13.0

[net 11/11] net/mlx5e: Fix CQ moderation mode not set properly

[Saeed Mahameed]

From: Tal Gilboa <talgi@mellanox.com>

cq_period_mode assignment was mistakenly removed so it was always set to "0",
which is EQE based moderation, regardless of the device CAPs and
requested value in ethtool.

Fixes: 6a9764efb255 ("net/mlx5e: Isolate open_channels from priv->params")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 57f31fa478ce..6ad7f07e7861 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1969,6 +1969,7 @@ static void mlx5e_build_rx_cq_param(struct mlx5e_priv *priv,
 	}
 
 	mlx5e_build_common_cq_param(priv, param);
+	param->cq_period_mode = params->rx_cq_period_mode;
 }
 
 static void mlx5e_build_tx_cq_param(struct mlx5e_priv *priv,
-- 
2.13.0

Re: [pull request][net 00/11] Mellanox, mlx5 fixes 2017-08-30

[David Miller]

From: Saeed Mahameed <saeedm@mellanox.com>
Date: Thu, 31 Aug 2017 01:20:59 +0300

> This series contains some misc fixes to the mlx5 driver.
> 
> Please pull and let me know if there's any problem.

Series applied, thanks.