[Qemu-devel] [PATCH v7] nios2: Add Altera JTAG UART emulation

[Qemu-devel] [PATCH v7] nios2: Add Altera JTAG UART emulation

[Tobias Klauser]

From: Juro Bystricky <juro.bystricky@intel.com>

Add the Altera JTAG UART model.

Hardware emulation based on:
https://www.altera.com/en_US/pdfs/literature/ug/ug_embedded_ip.pdf
(Please see "Register Map" on page 65)

Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Tobias Klauser <tklauser@distanz.ch>
[tk: updated to compile with latest qemu master]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
---

v7:
 - resending with changes needed to compile with latest qemu master

 default-configs/nios2-softmmu.mak |   1 +
 hw/char/Makefile.objs             |   1 +
 hw/char/altera_juart.c            | 286 ++++++++++++++++++++++++++++++++++++++
 include/hw/char/altera_juart.h    |  46 ++++++
 4 files changed, 334 insertions(+)
 create mode 100644 hw/char/altera_juart.c
 create mode 100644 include/hw/char/altera_juart.h

diff --git a/default-configs/nios2-softmmu.mak b/default-configs/nios2-softmmu.mak
index 74dc70caaef0..61598465c11d 100644
--- a/default-configs/nios2-softmmu.mak
+++ b/default-configs/nios2-softmmu.mak
@@ -4,3 +4,4 @@ CONFIG_NIOS2=y
 CONFIG_SERIAL=y
 CONFIG_PTIMER=y
 CONFIG_ALTERA_TIMER=y
+CONFIG_ALTERA_JUART=y
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index 1bcd37e98d9c..adb0e3ebc36a 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -28,6 +28,7 @@ common-obj-$(CONFIG_LM32) += lm32_juart.o
 common-obj-$(CONFIG_LM32) += lm32_uart.o
 common-obj-$(CONFIG_MILKYMIST) += milkymist-uart.o
 common-obj-$(CONFIG_SCLPCONSOLE) += sclpconsole.o sclpconsole-lm.o
+common-obj-$(CONFIG_ALTERA_JUART) += altera_juart.o
 
 obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o
 obj-$(CONFIG_TERMINAL3270) += terminal3270.o
diff --git a/hw/char/altera_juart.c b/hw/char/altera_juart.c
new file mode 100644
index 000000000000..66adbd261f4c
--- /dev/null
+++ b/hw/char/altera_juart.c
@@ -0,0 +1,286 @@
+/*
+ * QEMU model of the Altera JTAG UART.
+ *
+ * Copyright (c) 2016-2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * The Altera JTAG UART hardware registers are described in:
+ * https://www.altera.com/en_US/pdfs/literature/ug/ug_embedded_ip.pdf
+ * (In particular "Register Map" on page 65)
+ */
+
+#include "qemu/osdep.h"
+#include "chardev/char-serial.h"
+#include "hw/char/altera_juart.h"
+#include "sysemu/sysemu.h"
+#include "qemu/error-report.h"
+
+/* Data register */
+#define OFFSET_R_DATA   0
+#define DATA_RVALID     BIT(15)
+#define DATA_RAVAIL     0xFFFF0000
+
+/* Control register */
+#define OFFSET_R_CONTROL 4
+#define CONTROL_RE      BIT(0)
+#define CONTROL_WE      BIT(1)
+#define CONTROL_RI      BIT(8)
+#define CONTROL_WI      BIT(9)
+#define CONTROL_AC      BIT(10)
+#define CONTROL_WSPACE  0xFFFF0000
+
+#define CONTROL_WMASK (CONTROL_RE | CONTROL_WE | CONTROL_AC)
+
+#define TYPE_ALTERA_JUART "altera-juart"
+#define ALTERA_JUART(obj) \
+    OBJECT_CHECK(AlteraJUARTState, (obj), TYPE_ALTERA_JUART)
+
+/* Two registers 4 bytes wide each */
+#define ALTERA_JTAG_UART_REGS_MEM_SIZE  (2 * 4)
+
+/*
+ * The JTAG UART core generates an interrupt when either of the individual
+ * interrupt conditions is pending and enabled.
+ */
+static void altera_juart_update_irq(AlteraJUARTState *s)
+{
+    unsigned int irq;
+
+    irq = ((s->jcontrol & CONTROL_WE) && (s->jcontrol & CONTROL_WI)) ||
+          ((s->jcontrol & CONTROL_RE) && (s->jcontrol & CONTROL_RI));
+
+    qemu_set_irq(s->irq, irq);
+}
+
+static uint64_t altera_juart_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    AlteraJUARTState *s = opaque;
+    uint32_t r;
+
+    switch (addr) {
+    case OFFSET_R_DATA:
+        r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & (s->rx_fifo_size - 1)];
+        if (s->rx_fifo_len) {
+            s->rx_fifo_len--;
+            qemu_chr_fe_accept_input(&s->chr);
+            s->jdata = r | DATA_RVALID | (s->rx_fifo_len << 16);
+            s->jcontrol |= CONTROL_RI;
+        } else {
+            s->jdata = 0;
+            s->jcontrol &= ~CONTROL_RI;
+        }
+
+        altera_juart_update_irq(s);
+        return s->jdata;
+
+    case OFFSET_R_CONTROL:
+        return s->jcontrol;
+    }
+
+    return 0;
+}
+
+static void altera_juart_write(void *opaque, hwaddr addr,
+                               uint64_t value, unsigned int size)
+{
+    AlteraJUARTState *s = opaque;
+    unsigned char c;
+
+    switch (addr) {
+    case OFFSET_R_DATA:
+        c = value & 0xFF;
+        s->jcontrol |= CONTROL_WI;
+        s->jdata = c;
+        qemu_chr_fe_write(&s->chr, &c, 1);
+        altera_juart_update_irq(s);
+        break;
+
+    case OFFSET_R_CONTROL:
+        /* Only RE and WE are writable */
+        value &= CONTROL_WMASK;
+        s->jcontrol &= ~CONTROL_WMASK;
+        s->jcontrol |= value;
+
+        /* Writing 1 to AC clears it to 0 */
+        if (value & CONTROL_AC) {
+            s->jcontrol &= ~CONTROL_AC;
+        }
+        altera_juart_update_irq(s);
+        break;
+    }
+}
+
+static int altera_juart_can_receive(void *opaque)
+{
+    AlteraJUARTState *s = opaque;
+    return s->rx_fifo_size - s->rx_fifo_len;
+}
+
+static void altera_juart_receive(void *opaque, const uint8_t *buf, int size)
+{
+    int i;
+    AlteraJUARTState *s = opaque;
+
+    for (i = 0; i < size; i++) {
+        s->rx_fifo[s->rx_fifo_pos] = buf[i];
+        s->rx_fifo_pos++;
+        s->rx_fifo_pos &= (s->rx_fifo_size - 1);
+        s->rx_fifo_len++;
+    }
+    s->jcontrol |= CONTROL_RI;
+    altera_juart_update_irq(s);
+}
+
+static void altera_juart_event(void *opaque, int event)
+{
+}
+
+static void altera_juart_reset(DeviceState *d)
+{
+    AlteraJUARTState *s = ALTERA_JUART(d);
+
+    s->jdata = 0;
+
+    /* The number of spaces available in the write FIFO */
+    s->jcontrol = s->rx_fifo_size << 16;
+    s->rx_fifo_pos = 0;
+    s->rx_fifo_len = 0;
+}
+
+static const MemoryRegionOps juart_ops = {
+    .read = altera_juart_read,
+    .write = altera_juart_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void altera_juart_init(Object *obj)
+{
+    SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
+    AlteraJUARTState *s = ALTERA_JUART(obj);
+
+    memory_region_init_io(&s->mmio, OBJECT(s), &juart_ops, s,
+                    TYPE_ALTERA_JUART, ALTERA_JTAG_UART_REGS_MEM_SIZE);
+    sysbus_init_mmio(sbd, &s->mmio);
+    sysbus_init_irq(sbd, &s->irq);
+}
+
+void altera_juart_create(int channel, const hwaddr addr, qemu_irq irq, uint32_t fifo_sz)
+{
+    DeviceState *dev;
+    SysBusDevice *bus;
+    Chardev *chr;
+    const char chr_name[] = "juart";
+    char label[ARRAY_SIZE(chr_name) + 1];
+
+    dev = qdev_create(NULL, TYPE_ALTERA_JUART);
+
+    if (channel >= MAX_SERIAL_PORTS) {
+        error_report("Only %d serial ports are supported by QEMU",
+                     MAX_SERIAL_PORTS);
+        exit(1);
+    }
+
+    chr = serial_hds[channel];
+    if (!chr) {
+        snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel);
+        chr = qemu_chr_new(label, "null");
+        if (!chr) {
+            error_report("Failed to assign serial port to altera %s", label);
+            exit(1);
+        }
+    }
+    qdev_prop_set_chr(dev, "chardev", chr);
+
+    /*
+     * FIFO size can be set from 8 to 32,768 bytes.
+     * Only powers of two are allowed.
+     */
+    if (fifo_sz < 8 || fifo_sz > 32768 || (fifo_sz & ~(1 << ctz32(fifo_sz)))) {
+        error_report("juart%d: Invalid FIFO size. [%u]", channel, fifo_sz);
+        exit(1);
+    }
+
+    qdev_prop_set_uint32(dev, "fifo-size", fifo_sz);
+    bus = SYS_BUS_DEVICE(dev);
+    qdev_init_nofail(dev);
+
+    if (addr != (hwaddr)-1) {
+        sysbus_mmio_map(bus, 0, addr);
+    }
+
+    sysbus_connect_irq(bus, 0, irq);
+}
+
+static const VMStateDescription vmstate_altera_juart = {
+    .name = "altera-juart" ,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(jdata, AlteraJUARTState),
+        VMSTATE_UINT32(jcontrol, AlteraJUARTState),
+        VMSTATE_VBUFFER_UINT32(rx_fifo, AlteraJUARTState, 1, NULL, rx_fifo_size),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void altera_juart_realize(DeviceState *dev, Error **errp)
+{
+    AlteraJUARTState *s = ALTERA_JUART(dev);
+    qemu_chr_fe_set_handlers(&s->chr,
+                             altera_juart_can_receive,
+                             altera_juart_receive,
+                             altera_juart_event,
+                             NULL, s, NULL, true);
+    s->rx_fifo = g_malloc(s->rx_fifo_size);
+}
+
+static void altera_juart_unrealize(DeviceState *dev, Error **errp)
+{
+    AlteraJUARTState *s = ALTERA_JUART(dev);
+    g_free(s->rx_fifo);
+}
+
+static Property altera_juart_props[] = {
+    DEFINE_PROP_CHR("chardev", AlteraJUARTState, chr),
+    DEFINE_PROP_UINT32("fifo-size", AlteraJUARTState, rx_fifo_size,
+                                        ALTERA_JUART_DEFAULT_FIFO_SIZE),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void altera_juart_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = altera_juart_realize;
+    dc->unrealize = altera_juart_unrealize;
+    dc->props = altera_juart_props;
+    dc->vmsd = &vmstate_altera_juart;
+    dc->reset = altera_juart_reset;
+    dc->desc = "Altera JTAG UART";
+}
+
+static const TypeInfo altera_juart_info = {
+    .name          = TYPE_ALTERA_JUART,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(AlteraJUARTState),
+    .instance_init = altera_juart_init,
+    .class_init    = altera_juart_class_init,
+};
+
+static void altera_juart_register(void)
+{
+    type_register_static(&altera_juart_info);
+}
+
+type_init(altera_juart_register)
diff --git a/include/hw/char/altera_juart.h b/include/hw/char/altera_juart.h
new file mode 100644
index 000000000000..fcf7a602523d
--- /dev/null
+++ b/include/hw/char/altera_juart.h
@@ -0,0 +1,46 @@
+/*
+ * Altera JTAG UART emulation
+ *
+ * Copyright (c) 2016-2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef ALTERA_JUART_H
+#define ALTERA_JUART_H
+
+#include "chardev/char-fe.h"
+#include "hw/sysbus.h"
+
+/*
+ * The read and write FIFO depths can be set from 8 to 32,768 bytes.
+ * Only powers of two are allowed. A depth of 64 is generally optimal for
+ * performance, and larger values are rarely necessary.
+ */
+
+#define ALTERA_JUART_DEFAULT_FIFO_SIZE 64
+
+typedef struct AlteraJUARTState {
+    SysBusDevice busdev;
+    MemoryRegion mmio;
+    CharBackend chr;
+    qemu_irq irq;
+
+    unsigned int rx_fifo_size;
+    unsigned int rx_fifo_pos;
+    unsigned int rx_fifo_len;
+    uint32_t jdata;
+    uint32_t jcontrol;
+    uint8_t *rx_fifo;
+} AlteraJUARTState;
+
+void altera_juart_create(int channel, const hwaddr addr, qemu_irq irq,
+                         uint32_t fifo_size);
+
+#endif /* ALTERA_JUART_H */
-- 
2.13.0