All of lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET
@ 2017-09-02 15:43 Bin Meng
  2017-09-02 15:43 ` [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED Bin Meng
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Bin Meng @ 2017-09-02 15:43 UTC (permalink / raw)
  To: u-boot

This is not referenced anywhere. Drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

 drivers/block/ide.c          | 9 ---------
 include/ide.h                | 4 ----
 scripts/config_whitelist.txt | 1 -
 3 files changed, 14 deletions(-)

diff --git a/drivers/block/ide.c b/drivers/block/ide.c
index edcf87b..cea0397 100644
--- a/drivers/block/ide.c
+++ b/drivers/block/ide.c
@@ -792,15 +792,6 @@ void ide_init(void)
 	/* ATAPI Drives seems to need a proper IDE Reset */
 	ide_reset();
 
-#ifdef CONFIG_IDE_INIT_POSTRESET
-	WATCHDOG_RESET();
-
-	if (ide_init_postreset()) {
-		puts("ide_preinit_postreset failed\n");
-		return;
-	}
-#endif /* CONFIG_IDE_INIT_POSTRESET */
-
 	/*
 	 * Wait for IDE to get ready.
 	 * According to spec, this can take up to 31 seconds!
diff --git a/include/ide.h b/include/ide.h
index 9b0a4a9..a4be763 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -51,10 +51,6 @@ ulong ide_write(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
 int ide_preinit(void);
 #endif
 
-#ifdef CONFIG_IDE_INIT_POSTRESET
-int ide_init_postreset(void);
-#endif
-
 #if defined(CONFIG_OF_IDE_FIXUP)
 int ide_device_present(int dev);
 #endif
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 84dc5c9..440f740 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1080,7 +1080,6 @@ CONFIG_I2C_RTC_ADDR
 CONFIG_I2C_TIMEOUT
 CONFIG_ICACHE
 CONFIG_ICS307_REFCLK_HZ
-CONFIG_IDE_INIT_POSTRESET
 CONFIG_IDE_LED
 CONFIG_IDE_PCMCIA
 CONFIG_IDE_PREINIT
-- 
2.9.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED
  2017-09-02 15:43 [U-Boot] [PATCH 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET Bin Meng
@ 2017-09-02 15:43 ` Bin Meng
  2017-09-04  0:42   ` [U-Boot] [U-Boot,2/3] " Tom Rini
  2017-09-02 15:43 ` [U-Boot] [PATCH 3/3] block: Drop the ftide020 driver Bin Meng
  2017-09-04  0:42 ` [U-Boot] [U-Boot, 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET Tom Rini
  2 siblings, 1 reply; 6+ messages in thread
From: Bin Meng @ 2017-09-02 15:43 UTC (permalink / raw)
  To: u-boot

This is actually not used. Drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

 drivers/block/ide.c          | 46 --------------------------------------------
 include/configs/dbau1x00.h   |  1 -
 include/configs/lsxl.h       |  1 -
 include/configs/pb1x00.h     |  1 -
 include/ide.h                | 13 -------------
 scripts/config_whitelist.txt |  1 -
 6 files changed, 63 deletions(-)

diff --git a/drivers/block/ide.c b/drivers/block/ide.c
index cea0397..ce51153 100644
--- a/drivers/block/ide.c
+++ b/drivers/block/ide.c
@@ -44,12 +44,6 @@ struct blk_desc ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
 #define CONFIG_SYS_ATA_PORT_ADDR(port) (port)
 #endif
 
-#ifndef CONFIG_IDE_LED	/* define LED macros, they are not used anyways */
-# define DEVICE_LED(x) 0
-# define LED_IDE1 1
-# define LED_IDE2 2
-#endif
-
 #ifdef CONFIG_IDE_RESET
 extern void ide_set_reset(int idereset);
 
@@ -217,8 +211,6 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen,
 	unsigned char c, err, mask, res;
 	int n;
 
-	ide_led(DEVICE_LED(device), 1);	/* LED on       */
-
 	/* Select device
 	 */
 	mask = ATA_STAT_BUSY | ATA_STAT_DRQ;
@@ -326,7 +318,6 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen,
 		err = 0;
 	}
 AI_OUT:
-	ide_led(DEVICE_LED(device), 0);	/* LED off      */
 	return err;
 }
 
@@ -560,7 +551,6 @@ static void ide_ident(struct blk_desc *dev_desc)
 	device = dev_desc->devnum;
 	printf("  Device %d: ", device);
 
-	ide_led(DEVICE_LED(device), 1);	/* LED on       */
 	/* Select device
 	 */
 	ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
@@ -600,7 +590,6 @@ static void ide_ident(struct blk_desc *dev_desc)
 			 */
 			c = ide_wait(device, IDE_TIME_OUT);
 		}
-		ide_led(DEVICE_LED(device), 0);	/* LED off      */
 
 		if (((c & ATA_STAT_DRQ) == 0) ||
 		    ((c & (ATA_STAT_FAULT | ATA_STAT_ERR)) != 0)) {
@@ -716,22 +705,6 @@ static void ide_ident(struct blk_desc *dev_desc)
 #endif
 }
 
-__weak void ide_led(uchar led, uchar status)
-{
-#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */
-	static uchar led_buffer;	/* Buffer for current LED status */
-
-	uchar *led_port = LED_PORT;
-
-	if (status)		/* switch LED on        */
-		led_buffer |= led;
-	else			/* switch LED off       */
-		led_buffer &= ~led;
-
-	*led_port = led_buffer;
-#endif
-}
-
 __weak void ide_outb(int dev, int port, unsigned char val)
 {
 	debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
@@ -783,12 +756,6 @@ void ide_init(void)
 
 	WATCHDOG_RESET();
 
-	/*
-	 * Reset the IDE just to be sure.
-	 * Light LED's to show
-	 */
-	ide_led((LED_IDE1 | LED_IDE2), 1);	/* LED's on     */
-
 	/* ATAPI Drives seems to need a proper IDE Reset */
 	ide_reset();
 
@@ -818,8 +785,6 @@ void ide_init(void)
 			i++;
 			if (i > (ATA_RESET_TIME * 100)) {
 				puts("** Timeout **\n");
-				/* LED's off */
-				ide_led((LED_IDE1 | LED_IDE2), 0);
 				return;
 			}
 			if ((i >= 100) && ((i % 100) == 0))
@@ -844,10 +809,7 @@ void ide_init(void)
 
 	putc('\n');
 
-	ide_led((LED_IDE1 | LED_IDE2), 0);	/* LED's off    */
-
 	for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) {
-		int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2;
 		ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
 		ide_dev_desc[i].if_type = IF_TYPE_IDE;
 		ide_dev_desc[i].devnum = i;
@@ -862,9 +824,7 @@ void ide_init(void)
 #endif
 		if (!ide_bus_ok[IDE_BUS(i)])
 			continue;
-		ide_led(led, 1);	/* LED on       */
 		ide_ident(&ide_dev_desc[i]);
-		ide_led(led, 0);	/* LED off      */
 		dev_print(&ide_dev_desc[i]);
 
 		if ((ide_dev_desc[i].lba > 0) && (ide_dev_desc[i].blksz > 0)) {
@@ -987,8 +947,6 @@ ulong ide_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
 	debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n",
 	      device, blknr, blkcnt, (ulong) buffer);
 
-	ide_led(DEVICE_LED(device), 1);	/* LED on       */
-
 	/* Select device
 	 */
 	ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
@@ -1086,7 +1044,6 @@ ulong ide_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
 		buffer += ATA_BLOCKSIZE;
 	}
 IDE_READ_E:
-	ide_led(DEVICE_LED(device), 0);	/* LED off      */
 	return n;
 }
 
@@ -1114,8 +1071,6 @@ ulong ide_write(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
 	}
 #endif
 
-	ide_led(DEVICE_LED(device), 1);	/* LED on       */
-
 	/* Select device
 	 */
 	ide_outb(device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
@@ -1179,7 +1134,6 @@ ulong ide_write(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
 		buffer += ATA_BLOCKSIZE;
 	}
 WR_OUT:
-	ide_led(DEVICE_LED(device), 0);	/* LED off      */
 	return n;
 }
 
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index ce91f10..1207372 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -163,7 +163,6 @@
 #define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
 #define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index 7cbbe87..5d5851f 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -142,7 +142,6 @@
 #endif /* CONFIG_CMD_NET */
 
 #ifdef CONFIG_IDE
-#undef CONFIG_IDE_LED
 #undef CONFIG_SYS_IDE_MAXBUS
 #define CONFIG_SYS_IDE_MAXBUS		1
 #undef CONFIG_SYS_IDE_MAXDEVICE
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index 369e82f..b7e3196 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -115,7 +115,6 @@
 #define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
 #define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
 
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
 
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
diff --git a/include/ide.h b/include/ide.h
index a4be763..4d78891 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -15,19 +15,6 @@
 #define	ATA_CURR_BASE(dev)	(CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
 extern ulong ide_bus_offset[];
 
-#ifdef CONFIG_IDE_LED
-
-/*
- * LED Port
- */
-#define	LED_PORT	((uchar *)(PER8_BASE + 0x3000))
-#define LED_IDE1	0x01
-#define LED_IDE2	0x02
-#define	DEVICE_LED(d)	((d & 2) | ((d & 2) == 0)) /* depends on bit positions! */
-
-void ide_led(uchar led, uchar status);
-#endif /* CONFIG_IDE_LED */
-
 /*
  * Function Prototypes
  */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 440f740..2aa23dc 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1080,7 +1080,6 @@ CONFIG_I2C_RTC_ADDR
 CONFIG_I2C_TIMEOUT
 CONFIG_ICACHE
 CONFIG_ICS307_REFCLK_HZ
-CONFIG_IDE_LED
 CONFIG_IDE_PCMCIA
 CONFIG_IDE_PREINIT
 CONFIG_IDE_REG_CS
-- 
2.9.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] block: Drop the ftide020 driver
  2017-09-02 15:43 [U-Boot] [PATCH 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET Bin Meng
  2017-09-02 15:43 ` [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED Bin Meng
@ 2017-09-02 15:43 ` Bin Meng
  2017-09-04  0:42   ` [U-Boot] [U-Boot,3/3] " Tom Rini
  2017-09-04  0:42 ` [U-Boot] [U-Boot, 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET Tom Rini
  2 siblings, 1 reply; 6+ messages in thread
From: Bin Meng @ 2017-09-02 15:43 UTC (permalink / raw)
  To: u-boot

This is not used in U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

 drivers/block/Makefile       |   1 -
 drivers/block/ftide020.c     | 347 -------------------------------------------
 drivers/block/ftide020.h     | 266 ---------------------------------
 scripts/config_whitelist.txt |   3 -
 4 files changed, 617 deletions(-)
 delete mode 100644 drivers/block/ftide020.c
 delete mode 100644 drivers/block/ftide020.h

diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index dea2c15..d06a598 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -12,7 +12,6 @@ obj-y += blk_legacy.o
 endif
 
 obj-$(CONFIG_IDE) += ide.o
-obj-$(CONFIG_IDE_FTIDE020) += ftide020.o
 obj-$(CONFIG_SANDBOX) += sandbox.o
 obj-$(CONFIG_SYSTEMACE) += systemace.o
 obj-$(CONFIG_BLOCK_CACHE) += blkcache.o
diff --git a/drivers/block/ftide020.c b/drivers/block/ftide020.c
deleted file mode 100644
index 1f6995e..0000000
--- a/drivers/block/ftide020.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * Faraday FTIDE020 ATA Controller (AHB)
- *
- * (C) Copyright 2011 Andes Technology
- * Greentime Hu <greentime@andestech.com>
- * Macpaul Lin <macpaul@andestech.com>
- * Kuo-Wei Chou <kwchou@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/* ftide020.c - ide support functions for the FTIDE020_S controller */
-
-#include <config.h>
-#include <common.h>
-#include <ata.h>
-#include <ide.h>
-#include <asm/io.h>
-#include <api_public.h>
-
-#include "ftide020.h"
-
-/* base address */
-#define FTIDE_BASE	CONFIG_SYS_ATA_BASE_ADDR
-
-/*
- * data address - The CMD and DATA use the same FIFO in FTIDE020_S
- *   FTIDE_DATA = CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_DATA_OFFSET
- *		= &ftide020->rw_fifo
- */
-#define FTIDE_DATA	(&ftide020->rw_fifo)
-
-/* command and data I/O macros */
-/* 0x0 - DATA FIFO */
-#define WRITE_DATA(x)	outl((x), &ftide020->rw_fifo)	/* 0x00 */
-#define READ_DATA()	inl(&ftide020->rw_fifo)		/* 0x00 */
-/* 0x04 - R: Status Reg, W: CMD_FIFO */
-#define WRITE_CMD(x)	outl((x), &ftide020->cmd_fifo)	/* 0x04 */
-#define READ_STATUS()	inl(&ftide020->cmd_fifo)	/* 0x04 */
-
-void ftide_set_device(int cx8, int dev)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
-	WRITE_CMD(SET_DEV_CMD | IDE_SET_CX8(cx8) | dev);
-}
-
-unsigned char ide_read_register(int dev, unsigned int port)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
-	ftide_set_device(0, dev);
-	WRITE_CMD(READ_REG_CMD | IDE_REG_CS_READ(CONFIG_IDE_REG_CS) |
-		IDE_REG_DA_WRITE(port));
-
-	return READ_DATA() & 0xff;
-}
-
-void ide_write_register(int dev, unsigned int port, unsigned char val)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
-	ftide_set_device(0, dev);
-	WRITE_CMD(WRITE_REG_CMD | IDE_REG_CS_WRITE(CONFIG_IDE_REG_CS) |
-		IDE_REG_DA_WRITE(port) | val);
-}
-
-void ide_write_data(int dev, const ulong *sect_buf, int words)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
-	ftide_set_device(0, dev);
-	WRITE_CMD(WRITE_DATA_CMD | ((words << 2) - 1));
-
-	/* block write */
-	outsl(FTIDE_DATA, sect_buf, words);
-}
-
-void ide_read_data(int dev, ulong *sect_buf, int words)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
-	ftide_set_device(0, dev);
-	WRITE_CMD(READ_DATA_CMD | ((words << 2) - 1));
-
-	/* block read */
-	insl(FTIDE_DATA, sect_buf, words);
-}
-
-void ftide_dfifo_ready(ulong *time)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
-	while (!(READ_STATUS() & STATUS_RFE)) {
-		if (*time-- == 0)
-			break;
-
-		udelay(100);
-	}
-}
-
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
-
-/* Reset_IDE_controller */
-static void reset_ide_controller(void)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-	unsigned int val;
-
-	val = inl(&ftide020->cr);
-
-	val |= CONTROL_RST;
-	outl(val, &ftide020->cr);
-
-	/* wait until reset OK, this is poor HW design */
-	mdelay(50);
-	val &= ~(CONTROL_RST);
-	outl(val, &ftide020->cr);
-
-	mdelay(50);
-	val |= CONTROL_SRST;
-	outl(val, &ftide020->cr);
-
-	/* wait until reset OK, this is poor HW design */
-	mdelay(50);
-	val &= ~(CONTROL_SRST);
-	outl(val, &ftide020->cr);
-
-	/* IORDY enable for PIO, for 2 device */
-	val |= (CONTROL_IRE0 | CONTROL_IRE1);
-	outl(val, &ftide020->cr);
-}
-
-/* IDE clock frequence */
-uint ftide_clock_freq(void)
-{
-	/*
-	 * todo: To aquire dynamic system frequency is dependend on the power
-	 * management unit which the ftide020 is connected to. In current,
-	 * there are only few PMU supports in u-boot.
-	 * So this function is wait for future enhancement.
-	 */
-	return 100;
-}
-
-/* Calculate Timing Registers */
-static unsigned int timing_cal(u16 t0, u16 t1, u16 t2, u16 t4)
-{
-	unsigned int val, ahb_ns = 8;
-	u8 TEOC, T1, T2, T4;
-
-	T1 = (u8) (t1 / ahb_ns);
-	if ((T1 * ahb_ns) == t1)
-		T1--;
-
-	T2 = (u8) (t2 / ahb_ns);
-	if ((T2 * ahb_ns) == t2)
-		T2--;
-
-	T4 = (u8) (t4 / ahb_ns);
-	if ((T4 * ahb_ns) == t4)
-		T4--;
-
-	TEOC = (u8) (t0 / ahb_ns);
-	if ((TEOC * ahb_ns) == t0)
-		TEOC--;
-
-	TEOC = ((TEOC > (T1 + T2 + T4)) ? (TEOC - (T1 + T2 + T4)) : 0);
-
-	/*
-	 * Here the fields in data timing registers in PIO mode
-	 * is accessed the same way as command timing registers.
-	 */
-	val =	DT_REG_PIO_T1(T1)	|
-		DT_REG_PIO_T2(T2)	|
-		DT_REG_PIO_T4(T4)	|
-		DT_REG_PIO_TEOC(TEOC);
-
-	return val;
-}
-
-/* Set Timing Register */
-static unsigned int set_mode_timing(u8 dev, u8 id, u8 mode)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-	u16 t0, t1, t2, t4;
-	u8 tcyc, tcvs, tmli, tenv, tack, trp;
-	unsigned int val, sysclk = 8;
-
-	if (id >= TATOL_TIMING)
-		return 0;
-
-	sysclk = ftide_clock_freq();
-	switch (id) {
-	case CMD_TIMING:
-		if (mode < REG_MODE) {
-			t0 = REG_ACCESS_TIMING[REG_T0][mode];
-			t1 = REG_ACCESS_TIMING[REG_T1][mode];
-			t2 = REG_ACCESS_TIMING[REG_T2][mode];
-			t4 = REG_ACCESS_TIMING[REG_T4][mode];
-
-			val = timing_cal(t0, t1, t2, t4);
-			outl(val, (dev ? &ftide020->ctrd1 : &ftide020->ctrd0));
-			return 1;
-		} else
-			return 0;
-	case PIO_TIMING:
-		if (mode < PIO_MODE) {
-			t0 = PIO_ACCESS_TIMING[PIO_T0][mode];
-			t1 = PIO_ACCESS_TIMING[PIO_T1][mode];
-			t2 = PIO_ACCESS_TIMING[PIO_T2][mode];
-			t4 = PIO_ACCESS_TIMING[PIO_T4][mode];
-
-			val = timing_cal(t0, t1, t2, t4);
-
-			outl(val, (dev ? &ftide020->dtrd1 : &ftide020->dtrd0));
-			return 1;
-		} else
-			return 0;
-	case DMA_TIMING:
-		if (mode < UDMA_MODE) {
-			/*
-			 * 0.999 is ceiling
-			 * for tcyc, tcvs, tmli, tenv, trp, tack
-			 */
-			tcyc = (u8) (((UDMA_ACCESS_TIMING[UDMA_TCYC][mode] \
-						* sysclk) + 9990) / 10000);
-			tcvs = (u8) (((UDMA_ACCESS_TIMING[UDMA_TCVS][mode] \
-						* sysclk) + 9990) / 10000);
-			tmli = (u8) (((UDMA_ACCESS_TIMING[UDMA_TMLI][mode] \
-						* sysclk) + 9990) / 10000);
-			tenv = (u8) (((UDMA_ACCESS_TIMING[UDMA_TENV][mode] \
-						* sysclk) + 9990) / 10000);
-			trp  = (u8) (((UDMA_ACCESS_TIMING[UDMA_TRP][mode] \
-						* sysclk) + 9990) / 10000);
-			tack = (u8) (((UDMA_ACCESS_TIMING[UDMA_TACK][mode] \
-						 * sysclk) + 9990) / 10000);
-
-			val  =	DT_REG_UDMA_TENV((tenv > 0) ? (tenv - 1) : 0) |
-				DT_REG_UDMA_TMLI((tmli > 0) ? (tmli - 1) : 0) |
-				DT_REG_UDMA_TCYC((tcyc > 0) ? (tcyc - 1) : 0) |
-				DT_REG_UDMA_TACK((tack > 0) ? (tack - 1) : 0) |
-				DT_REG_UDMA_TCVS((tcvs > 0) ? (tcvs - 1) : 0) |
-				DT_REG_UDMA_TRP((trp > 0) ? (trp - 1) : 0);
-
-			outl(val, (dev ? &ftide020->dtrd1 : &ftide020->dtrd0));
-			return 1;
-		} else
-			return 0;
-	default:
-		return 0;
-	}
-}
-
-static void ftide_read_hwrev(void)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-	unsigned int rev;
-
-	rev = inl(&ftide020->revision);
-}
-
-static int ftide_controller_probe(void)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-	unsigned int bak;
-
-	bak = inl(&ftide020->ctrd1);
-
-	/* probing by using shorter setup time */
-	outl(CONFIG_CTRD1_PROBE_T1, &ftide020->ctrd1);
-	if ((inl(&ftide020->ctrd1) & 0xff) != CONFIG_CTRD1_PROBE_T1) {
-		outl(bak, &ftide020->ctrd1);
-		return 0;
-	}
-
-	/* probing by using longer setup time */
-	outl(CONFIG_CTRD1_PROBE_T2, &ftide020->ctrd1);
-	if ((inl(&ftide020->ctrd1) & 0xff) != CONFIG_CTRD1_PROBE_T2) {
-		outl(bak, &ftide020->ctrd1);
-		return 0;
-	}
-
-	outl(bak, &ftide020->ctrd1);
-
-	return 1;
-}
-
-/* ide_preinit() was migrated from linux driver ide_probe_for_ftide() */
-int ide_preinit(void)
-{
-	static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-	int status;
-	unsigned int val;
-	int i;
-
-	status = 1;
-	for (i = 0; i < CONFIG_SYS_IDE_MAXBUS; i++)
-		ide_bus_offset[i] = -ATA_STATUS;
-
-	/* auto-detect IDE controller */
-	if (ftide_controller_probe()) {
-		printf("FTIDE020_S\n");
-	} else {
-		printf("FTIDE020_S ATA controller not found.\n");
-		return API_ENODEV;
-	}
-
-	/* check HW IP revision */
-	ftide_read_hwrev();
-
-	/* set FIFO threshold */
-	outl(((WRITE_FIFO - RX_THRESH) << 16) | RX_THRESH, &ftide020->dmatirr);
-
-	/* set Device_0 PIO_4 timing */
-	set_mode_timing(0, CMD_TIMING, REG_MODE4);
-	set_mode_timing(0, PIO_TIMING, PIO_MODE4);
-
-	/* set Device_1 PIO_4 timing */
-	set_mode_timing(1, CMD_TIMING, REG_MODE4);
-	set_mode_timing(1, PIO_TIMING, PIO_MODE4);
-
-	/* from E-bios */
-	/* little endian */
-	outl(0x0, &ftide020->cr);
-	mdelay(10);
-
-	outl(0x0fff0fff, &ftide020->ahbtr);
-	mdelay(10);
-
-	/* Enable controller Interrupt */
-	val = inl(&ftide020->cr);
-
-	/* Enable: IDE IRQ, IDE Terminate ERROR IRQ, AHB Timeout error IRQ */
-	val |= (CONTROL_IIE | CONTROL_TERIE | CONTROL_AERIE);
-	outl(val, &ftide020->cr);
-
-	status = 0;
-
-	return status;
-}
-
-void ide_set_reset(int flag)
-{
-	debug("ide_set_reset()\n");
-	reset_ide_controller();
-	return;
-}
diff --git a/drivers/block/ftide020.h b/drivers/block/ftide020.h
deleted file mode 100644
index 2d88c7c..0000000
--- a/drivers/block/ftide020.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Faraday FTIDE020_s ATA Controller (AHB)
- *
- * (C) Copyright 2011 Andes Technology
- * Greentime Hu <greentime@andestech.com>
- * Macpaul Lin <macpaul@andestech.com>
- * Kuo-Wei Chou <kwchou@andestech.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __FTIDE020_H
-#define __FTIDE020_H
-
-/* ftide020.h - ide support functions for the FTIDE020_S controller */
-
-/* ATA controller register offset */
-struct ftide020_s {
-	unsigned int	rw_fifo;	/* 0x00 - READ/WRITE FIFO	*/
-	unsigned int	cmd_fifo;	/* 0x04 - R: Status Reg, W: CMD_FIFO */
-	unsigned int	cr;		/* 0x08 - Control Reg		*/
-	unsigned int	dmatirr;	/* 0x0c - DMA Threshold/Interrupt Reg */
-	unsigned int	ctrd0;		/* 0x10 - Command Timing Reg Device 0 */
-	unsigned int	dtrd0;		/* 0x14 - Data Timing Reg Device 0 */
-	unsigned int	ctrd1;		/* 0x18 - Command Timing Reg Device 1 */
-	unsigned int	dtrd1;		/* 0x1c - Data Timing Reg Device 1 */
-	unsigned int	ahbtr;		/* 0x20 - AHB Timeout Reg	*/
-	unsigned int	RESVD0;		/* 0x24 */
-	unsigned int	RESVD1;		/* 0x28 */
-	unsigned int	RESVD2;		/* 0x2c */
-	unsigned int	f_cfifo;	/* 0x30 - Feature Info of CMD_FIFO */
-	unsigned int	f_wfifo;	/* 0x34 - Feature Info of WRITE_FIFO */
-	unsigned int	f_rfifo;	/* 0x3c - Feature Info of READ_FIFO */
-	unsigned int	revision;	/* 0x38 - Revision No. of FTIDE020_S */
-};
-
-/* reference parameters */
-#define CONFIG_IDE_REG_CS	0x2	/* ref: ATA spec chaper 10, table 42 */
-#define CONFIG_CTRD1_PROBE_T1	0x2
-#define CONFIG_CTRD1_PROBE_T2	0x5
-
-/* status register - 0x04 */
-#define STATUS_CSEL		(1 << 0)	/* CSEL			*/
-#define STATUS_CS(x)		(((x) >> 1) & 0x3)	/* CS#[1:0]	*/
-#define STATUS_DMACK		(1 << 3)	/* DMACK#		*/
-#define STATUS_DMARQ		(1 << 4)	/* DMA req		*/
-#define STATUS_INTRQ		(1 << 5)	/* INT req		*/
-#define STATUS_DIOR		(1 << 6)	/* DIOR			*/
-#define STATUS_IORDY		(1 << 7)	/* I/O ready		*/
-#define STATUS_DIOW		(1 << 8)	/* DIOW#		*/
-#define STATUS_PDIAG		(1 << 9)	/* PDIAG		*/
-#define STATUS_DASP		(1 << 10)	/* DASP#		*/
-#define STATUS_DEV		(1 << 11)	/* selected device	*/
-#define STATUS_PIO		(1 << 12)	/* PIO in progress	*/
-#define STATUS_DMA		(1 << 13)	/* DMA in progress	*/
-#define STATUS_WFE		(1 << 14)	/* write fifo full	*/
-#define STATUS_RFE		(1 << 15)	/* read fifo empty	*/
-#define STATUS_COUNTER(x)	(((x) >> 16) & 0x3fff)	/* data tx counter */
-#define STATUS_ERR		(1 << 30)	/* trasfer terminated	*/
-#define STATUS_AER		(1 << 31)	/* AHB timeout indicate	*/
-
-/* Control register - 0x08 */
-#define CONTROL_TYPE_PIO	0x0
-#define CONTROL_TYPE_UDMA	0x1
-
-/* Device 0 */
-#define CONTROL_TYP0(x)		(((x) & 0x7) << 0)
-#define CONTROL_IRE0		(1 << 3) /* enable IORDY for PIO */
-#define CONTROL_RESVD_DW0	(1 << 4) /* Reserved - DW0 ?	*/
-#define CONTROL_E0		(1 << 5) /* E0: 1: Big Endian	*/
-#define CONTROL_RESVD_WP0	(1 << 6) /* Reserved - WP0 ?	*/
-#define CONTROL_RESVD_SE0	(1 << 7) /* Reserved - SE0 ?	*/
-#define CONTROL_RESVD_ECC0	(1 << 8) /* Reserved - ECC0 ?	*/
-
-#define CONTROL_RAEIE		(1 << 9)  /* IRQ - read fifo almost full */
-#define CONTROL_RNEIE		(1 << 10) /* IRQ - read fifo not empty	*/
-#define CONTROL_WAFIE		(1 << 11) /* IRQ - write fifo almost empty */
-#define CONTROL_WNFIE		(1 << 12) /* IRQ - write fifo not full	*/
-#define CONTROL_RESVD_FIRQ	(1 << 13) /* RESERVED - FIRQ ?		*/
-#define CONTROL_AERIE		(1 << 14) /* IRQ - AHB timeout error	*/
-#define CONTROL_IIE		(1 << 15) /* IDE IRQ enable		*/
-
-/* Device 1 */
-#define CONTROL_TYP1(x)		(((x) & 0x7) << 16)
-#define CONTROL_IRE1		(1 << 19)	/* enable IORDY for PIO */
-#define CONTROL_RESVD_DW1	(1 << 20)	/* Reserved - DW1 ?	*/
-#define CONTROL_E1		(1 << 21)	/* E1: 1: Big Endian	*/
-#define CONTROL_RESVD_WP1	(1 << 22)	/* Reserved - WP1 ?	*/
-#define CONTROL_RESVD_SE1	(1 << 23)	/* Reserved - SE1 ?	*/
-#define CONTROL_RESVD_ECC1	(1 << 24)	/* Reserved - ECC1 ?	*/
-
-#define CONTROL_DRE	(1 << 25)	/* DMA receive enable		*/
-#define CONTROL_DTE	(1 << 26)	/* DMA transmit enable		*/
-#define CONTRIL_RESVD	(1 << 27)
-#define CONTROL_TERIE	(1 << 28)	/* transfer terminate error IRQ	*/
-#define CONTROL_T	(1 << 29)	/* terminate current operation	*/
-#define CONTROL_SRST	(1 << 30)	/* IDE soft reset		*/
-#define CONTROL_RST	(1 << 31)	/* IDE hardware reset		*/
-
-/* IRQ register - 0x0c */
-#define IRQ_RXTHRESH(x)	(((x) & 0x3ff) << 0)	/* Read FIFO threshold	*/
-#define IRQ_RFAEIRQ	(1 << 10)	/* Read FIFO almost full intr req */
-#define IRQ_RFNEIRQ	(1 << 11)	/* Read FIFO not empty intr req	*/
-#define IRQ_WFAFIRQ	(1 << 12)	/* Write FIFO almost empty int req */
-#define IRQ_WFNFIRQ	(1 << 13)	/* Write FIFO not full intr req	*/
-#define IRQ_RESVD_FIRQ	(1 << 14)	/* Reserved - FIRQ ?		*/
-#define IRQ_IIRQ	(1 << 15)	/* IDE device interrupt request	*/
-#define IRQ_TXTHRESH(x)	(((x) & 0x3ff) << 16)	/* Write FIFO thershold	*/
-#define IRQ_TERMERR	(1 << 28)	/* Transfer termination indication */
-#define IRQ_AHBERR	(1 << 29)	/* AHB Timeout indication	*/
-
-/* Command Timing Register 0-1: ctrd (0x10, 0x18) */
-#define CT_REG_T1(x)	(((x) & 0xff) << 0)	/* setup time of addressed  */
-#define CT_REG_T2(x)	(((x) & 0xff) << 8)	/* pluse width of DIOR/DIOW */
-#define CT_REG_T4(x)	(((x) & 0xff) << 16)	/* data hold time */
-#define CT_REG_TEOC(x)	(((x) & 0xff) << 24)	/* time to the end of a cycle */
-
-/* Data Timing Register 0-1: dtrd (0x14, 0x1c) */
-/*
- * PIO mode:
- *	b(0:7)		DT_REG_PIO_T1: the setup time of addressed
- *	b(8:15)		DT_REG_PIO_T2: the pluse width of DIOR/DIOW
- *	b(16:23)	DT_REG_PIO_T4: data hold time
- *	b(24:31)	DT_REG_PIO_TEOC: the time to the end of a cycle
- */
-#define DT_REG_PIO_T1(x)	(((x) & 0xff) << 0)
-#define DT_REG_PIO_T2(x)	(((x) & 0xff) << 8)
-#define DT_REG_PIO_T4(x)	(((x) & 0xff) << 16)
-#define DT_REG_PIO_TEOC(x)	(((x) & 0xff) << 24)
-
-/*
- * UDMA mode:
- *	b(0:3)		DT_REG_UDMA_TENV: the envelope time
- *	b(4:7)		DT_REG_UDMA_TMLI: interlock time
- *	b(8:15)		DT_REG_UDMA_TCYC: cycle time - data time
- *	b(16:19)	DT_REG_UDMA_TACK: setup and hold time of DMACK
- *	b(23:30)	DT_REG_UDMA_TCVS: setup time of CRC
- *	b(24:31)	DT_REG_UDMA_TRP: time to ready to pause
- */
-#define DT_REG_UDMA_TENV(x)	(((x) & 0xf) << 0)
-#define DT_REG_UDMA_TMLI(x)	(((x) & 0xf) << 4)
-#define DT_REG_UDMA_TCYC(x)	(((x) & 0xff) << 8)
-#define DT_REG_UDMA_TACK(x)	(((x) & 0xf) << 16)
-#define DT_REG_UDMA_TCVS(x)	(((x) & 0xf) << 20)
-#define DT_REG_UDMA_TRP(x)	(((x) & 0xff) << 24)
-
-/* ftide020_s command formats */
-/* read: IDE Register (CF1) */
-#define IDE_REG_OPCODE_READ	(1 << 13)		/* 0x2000 */
-#define IDE_REG_CS_READ(x)	(((x) & 0x3) << 11)
-#define IDE_REG_DA_READ(x)	(((x) & 0x7) << 8)
-#define IDE_REG_CMD_READ(x)	0x0			/* fixed value */
-
-/* write: IDE Register (CF2) */
-#define IDE_REG_OPCODE_WRITE	(0x5 << 13)		/* 0xA000 */
-#define IDE_REG_CS_WRITE(x)	(((x) & 0x3) << 11)
-#define IDE_REG_DA_WRITE(x)	(((x) & 0x7) << 8)
-/* b(0:7) IDE_REG_CMD_WRITE(x):	Actual ATA command or data */
-#define IDE_REG_CMD_WRITE(x)	(((x) & 0xff) << 0)
-
-/* read/write data: PIO/UDMA (CF3) */
-#define IDE_DATA_WRITE		(1 << 15)		/* read: 0, write: 1 */
-#define IDE_DATA_OPCODE		(0x2 << 13)	/* device data access opcode */
-/* b(0:12) IDE_DATA_COUNTER(x): Number of transfers minus 1 */
-#define IDE_DATA_COUNTER(x)	(((x) & 0x1fff) << 0)
-
-/* set device: (CF4) */
-#define IDE_SET_OPCODE	(0x2740 << 2)			/* [15:2], 0x9d00 */
-/* CF3 counter value: 0: Tx in bytes, 1: in blocks (each block is 8 bytes) */
-#define IDE_SET_CX8(x)	(((x) & 0x1) << 1)
-#define IDE_SET_DEV(x)	(((x) & 0x1) << 0)	/* 0: Master, 1: Slave */
-
-/*
- * IDE command bit definition
- * This section is designed for minor hardware revision compatibility.
- */
-#define READ_REG_CMD	IDE_REG_OPCODE_READ			/* 0x2000 */
-#define WRITE_REG_CMD	IDE_REG_OPCODE_WRITE			/* 0xA000 */
-#define READ_DATA_CMD	IDE_DATA_OPCODE				/* 0x4000 */
-#define WRITE_DATA_CMD	(IDE_DATA_OPCODE | IDE_DATA_WRITE)	/* 0xC000 */
-#define SET_DEV_CMD	IDE_SET_OPCODE				/* 0x9D00 */
-
-#define TATOL_TIMING		3
-#define CMD_TIMING		0
-#define PIO_TIMING		1
-#define DMA_TIMING		2
-
-/* Timing Parameters */
-/* Register Access Timing Parameters */
-#define REG_PARAMETER		4
-#define REG_T0			0
-#define REG_T1			1
-#define REG_T2			2
-#define REG_T4			3
-
-#define REG_MODE		5
-#define REG_MODE0		0
-#define REG_MODE1		1
-#define REG_MODE2		2
-#define REG_MODE3		3
-#define REG_MODE4		4
-
-/* PIO Access Timing Parameters */
-#define PIO_PARAMETER		4
-#define PIO_T0			0
-#define PIO_T1			1
-#define PIO_T2			2
-#define PIO_T4			3
-
-#define PIO_MODE		5
-#define PIO_MODE0		0
-#define PIO_MODE1		1
-#define PIO_MODE2		2
-#define PIO_MODE3		3
-#define PIO_MODE4		4
-
-/* UDMA Access Timing Parameters */
-#define UDMA_PARAMETER		6
-#define UDMA_TCYC		0
-#define UDMA_TCVS		1
-#define UDMA_TMLI		2
-#define UDMA_TENV		3
-#define UDMA_TRP		4
-#define UDMA_TACK		5
-
-#define UDMA_MODE		7
-#define UDMA_MODE0		0
-#define UDMA_MODE1		1
-#define UDMA_MODE2		2
-#define UDMA_MODE3		3
-#define UDMA_MODE4		4
-#define UDMA_MODE5		5
-#define UDMA_MODE6		6
-
-/*
- * RX_THRESH:
- * hardware limitation: max = 8, should support 1,4,8,16,32,64,128,256
- */
-#define RX_THRESH		8
-#define WRITE_FIFO		32	/* Hardwired value */
-
-/* Time Table */
-unsigned int REG_ACCESS_TIMING[REG_PARAMETER][REG_MODE] = {
-	{600,	383,	330,	180,	120},
-	{70,	50,	30,	30,	25},
-	{290,	290,	290,	80,	70},
-	{30,	20,	15,	10,	10},
-};
-
-unsigned int PIO_ACCESS_TIMING[PIO_PARAMETER][PIO_MODE] = {
-	{600,	383,	240,	180,	120},
-	{70,	50,	30,	30,	25},
-	{165,	125,	100,	80,	70},
-	{30,	20,	15,	10,	10},
-};
-
-unsigned int UDMA_ACCESS_TIMING[UDMA_PARAMETER][UDMA_MODE] = {
-	{1120,	730,	540,	390,	250,	168,	130}, /* 10X */
-	{700,	480,	310,	200,	67,	100,	100}, /* 10X */
-	{200,	200,	200,	200,	200,	200,	200}, /* 10X */
-	{200,	200,	200,	200,	200,	200,	200}, /* 10X */
-	{1600,	1250,	1000,	1000,	1000,	850,	850}, /* 10X */
-	{200,	200,	200,	200,	200,	200,	200}, /* 10X */
-};
-
-#endif /* __FTIDE020_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 2aa23dc..fb2224e 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -377,8 +377,6 @@ CONFIG_CS8900_BUS32
 CONFIG_CSF_SIZE
 CONFIG_CTL_JTAG
 CONFIG_CTL_TBE
-CONFIG_CTRD1_PROBE_T1
-CONFIG_CTRD1_PROBE_T2
 CONFIG_CUSTOMER_BOARD_SUPPORT
 CONFIG_CYRUS
 CONFIG_D2NET_V2
@@ -1082,7 +1080,6 @@ CONFIG_ICACHE
 CONFIG_ICS307_REFCLK_HZ
 CONFIG_IDE_PCMCIA
 CONFIG_IDE_PREINIT
-CONFIG_IDE_REG_CS
 CONFIG_IDE_RESET
 CONFIG_IDE_SWAP_IO
 CONFIG_IDS8313
-- 
2.9.2

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET
  2017-09-02 15:43 [U-Boot] [PATCH 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET Bin Meng
  2017-09-02 15:43 ` [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED Bin Meng
  2017-09-02 15:43 ` [U-Boot] [PATCH 3/3] block: Drop the ftide020 driver Bin Meng
@ 2017-09-04  0:42 ` Tom Rini
  2 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2017-09-04  0:42 UTC (permalink / raw)
  To: u-boot

On Sat, Sep 02, 2017 at 08:43:52AM -0700, Bin Meng wrote:

> This is not referenced anywhere. Drop it.
> 
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/e448e02a/attachment.sig>

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot,2/3] block: ide: Drop CONFIG_IDE_LED
  2017-09-02 15:43 ` [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED Bin Meng
@ 2017-09-04  0:42   ` Tom Rini
  0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2017-09-04  0:42 UTC (permalink / raw)
  To: u-boot

On Sat, Sep 02, 2017 at 08:43:53AM -0700, Bin Meng wrote:

> This is actually not used. Drop it.
> 
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/c64578cf/attachment.sig>

^ permalink raw reply	[flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot,3/3] block: Drop the ftide020 driver
  2017-09-02 15:43 ` [U-Boot] [PATCH 3/3] block: Drop the ftide020 driver Bin Meng
@ 2017-09-04  0:42   ` Tom Rini
  0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2017-09-04  0:42 UTC (permalink / raw)
  To: u-boot

On Sat, Sep 02, 2017 at 08:43:54AM -0700, Bin Meng wrote:

> This is not used in U-Boot.
> 
> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170903/c16708aa/attachment.sig>

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-09-04  0:42 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-02 15:43 [U-Boot] [PATCH 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET Bin Meng
2017-09-02 15:43 ` [U-Boot] [PATCH 2/3] block: ide: Drop CONFIG_IDE_LED Bin Meng
2017-09-04  0:42   ` [U-Boot] [U-Boot,2/3] " Tom Rini
2017-09-02 15:43 ` [U-Boot] [PATCH 3/3] block: Drop the ftide020 driver Bin Meng
2017-09-04  0:42   ` [U-Boot] [U-Boot,3/3] " Tom Rini
2017-09-04  0:42 ` [U-Boot] [U-Boot, 1/3] block: ide: Drop CONFIG_IDE_INIT_POSTRESET Tom Rini

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.