[PATCH net-next v2 00/12] net: dsa: b53/bcm_sf2 cleanups

[PATCH net-next v2 00/12] net: dsa: b53/bcm_sf2 cleanups

[Florian Fainelli]

Hi all,

This patch series is a first pass set of clean-ups to reduce the number of LOCs
between b53 and bcm_sf2 and sharing as many functions as possible.

There is a number of additional cleanups queued up locally that require more
thorough testing.

Thanks!

Changes in v2:

- added Reviewed-by tags from Vivien
- added a missing EXPORT_SYMBOL() in patch 8
- fixed a typo in patch 5

Florian Fainelli (12):
  net: dsa: b53: Remove is_cpu_port()
  net: dsa: b53: Make b53_enable_cpu_port() take a port argument
  net: dsa: b53: Defer port enabling to calling port_enable
  net: dsa: bcm_sf2: Defer port enabling to calling port_enable
  net: dsa: b53: Use a macro to define I/O operations
  net: dsa: b53: Move Broadcom header setup to b53
  net: dsa: b53: Define EEE register page
  net: dsa: b53: Move EEE functions to b53
  net: dsa: b53: Wire-up EEE
  net: dsa: b53: Export b53_imp_vlan_setup()
  net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFP
  net: dsa: bcm_sf2: Utilize b53_{enable,disable}_port

 drivers/net/dsa/b53/b53_common.c | 151 ++++++++++++++++++++++++++++++++----
 drivers/net/dsa/b53/b53_priv.h   | 145 ++++++++---------------------------
 drivers/net/dsa/b53/b53_regs.h   |  48 ++++++++++++
 drivers/net/dsa/bcm_sf2.c        | 161 +++------------------------------------
 drivers/net/dsa/bcm_sf2.h        |   2 -
 drivers/net/dsa/bcm_sf2_cfp.c    |   6 +-
 drivers/net/dsa/bcm_sf2_regs.h   |  11 ---
 7 files changed, 228 insertions(+), 296 deletions(-)

-- 
2.9.3

[PATCH net-next v2 01/12] net: dsa: b53: Remove is_cpu_port()

[Florian Fainelli]

This is not used anywhere, so remove it.

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_priv.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 01bd8cbe9a3f..7528b22aeb03 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -186,11 +186,6 @@ static inline int is58xx(struct b53_device *dev)
 #define B53_CPU_PORT_25	5
 #define B53_CPU_PORT	8
 
-static inline int is_cpu_port(struct b53_device *dev, int port)
-{
-	return dev->cpu_port;
-}
-
 struct b53_device *b53_switch_alloc(struct device *base,
 				    const struct b53_io_ops *ops,
 				    void *priv);
-- 
2.9.3

[PATCH net-next v2 02/12] net: dsa: b53: Make b53_enable_cpu_port() take a port argument

[Florian Fainelli]

In preparation for future changes allowing the configuring of multiple
CPU ports, make b53_enable_cpu_port() take a port argument.

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 274f3679f33d..d8bc54cfcfbe 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -538,19 +538,18 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 }
 
-static void b53_enable_cpu_port(struct b53_device *dev)
+static void b53_enable_cpu_port(struct b53_device *dev, int port)
 {
-	unsigned int cpu_port = dev->cpu_port;
 	u8 port_ctrl;
 
 	/* BCM5325 CPU port is at 8 */
-	if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25)
-		cpu_port = B53_CPU_PORT;
+	if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
+		port = B53_CPU_PORT;
 
 	port_ctrl = PORT_CTRL_RX_BCST_EN |
 		    PORT_CTRL_RX_MCST_EN |
 		    PORT_CTRL_RX_UCST_EN;
-	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl);
+	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
 }
 
 static void b53_enable_mib(struct b53_device *dev)
@@ -820,7 +819,7 @@ static int b53_setup(struct dsa_switch *ds)
 		if (BIT(port) & ds->enabled_port_mask)
 			b53_enable_port(ds, port, NULL);
 		else if (dsa_is_cpu_port(ds, port))
-			b53_enable_cpu_port(dev);
+			b53_enable_cpu_port(dev, port);
 		else
 			b53_disable_port(ds, port, NULL);
 	}
-- 
2.9.3

[PATCH net-next v2 03/12] net: dsa: b53: Defer port enabling to calling port_enable

[Florian Fainelli]

There is no need to configure the enabled ports once in b53_setup() and then a
second time around when dsa_switch_ops::port_enable is called, just do it when
port_enable is called which is better in terms of power consumption and
correctness.

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index d8bc54cfcfbe..3297af6aab8a 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -815,12 +815,13 @@ static int b53_setup(struct dsa_switch *ds)
 	if (ret)
 		dev_err(ds->dev, "failed to apply configuration\n");
 
+	/* Configure IMP/CPU port, disable unused ports. Enabled
+	 * ports will be configured with .port_enable
+	 */
 	for (port = 0; port < dev->num_ports; port++) {
-		if (BIT(port) & ds->enabled_port_mask)
-			b53_enable_port(ds, port, NULL);
-		else if (dsa_is_cpu_port(ds, port))
+		if (dsa_is_cpu_port(ds, port))
 			b53_enable_cpu_port(dev, port);
-		else
+		else if (!(BIT(port) & ds->enabled_port_mask))
 			b53_disable_port(ds, port, NULL);
 	}
 
-- 
2.9.3

[PATCH net-next v2 04/12] net: dsa: bcm_sf2: Defer port enabling to calling port_enable

[Florian Fainelli]

There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and
then a second time around when dsa_switch_ops::port_enable is called, just do
it when port_enable is called which is better in terms of power consumption and
correctness.

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index d7b53d53c116..8acbd17bc1fd 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -890,14 +890,11 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	unsigned int port;
 
-	/* Enable all valid ports and disable those unused */
+	/* Disable unused ports and configure IMP port */
 	for (port = 0; port < priv->hw_params.num_ports; port++) {
-		/* IMP port receives special treatment */
-		if ((1 << port) & ds->enabled_port_mask)
-			bcm_sf2_port_setup(ds, port, NULL);
-		else if (dsa_is_cpu_port(ds, port))
+		if (dsa_is_cpu_port(ds, port))
 			bcm_sf2_imp_setup(ds, port);
-		else
+		else if (!((1 << port) & ds->enabled_port_mask))
 			bcm_sf2_port_disable(ds, port, NULL);
 	}
 
-- 
2.9.3

[PATCH net-next v2 05/12] net: dsa: b53: Use a macro to define I/O operations

[Florian Fainelli]

Instead of repeating the same pattern: acquire mutex, read/write,
release mutex, define a macro: b53_build_op() which takes the type
(read|write), I/O size, and value (scalar or pointer). This helps with
fixing bugs that could exist (e.g: missing barrier, lock etc.).

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_priv.h | 133 +++++++----------------------------------
 1 file changed, 22 insertions(+), 111 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 7528b22aeb03..f1136619e0e4 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -199,119 +199,30 @@ static inline void b53_switch_remove(struct b53_device *dev)
 	dsa_unregister_switch(dev->ds);
 }
 
-static inline int b53_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read8(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read16(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read32(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read48(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
+#define b53_build_op(type, op_size, val_type)	\
+static inline int b53_##type##op_size(struct b53_device *dev, u8 page,		\
+				      u8 reg, val_type val)			\
+{										\
+	int ret;								\
+										\
+	mutex_lock(&dev->reg_mutex);						\
+	ret = dev->ops->type##op_size(dev, page, reg, val);			\
+	mutex_unlock(&dev->reg_mutex);						\
+										\
+	return ret;								\
 }
 
-static inline int b53_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read64(dev, page, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write8(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write16(struct b53_device *dev, u8 page, u8 reg,
-			      u16 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write16(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write32(struct b53_device *dev, u8 page, u8 reg,
-			      u32 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write32(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write48(struct b53_device *dev, u8 page, u8 reg,
-			      u64 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write48(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg,
-			       u64 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write64(dev, page, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
+b53_build_op(read, 8, u8 *);
+b53_build_op(read, 16, u16 *);
+b53_build_op(read, 32, u32 *);
+b53_build_op(read, 48, u64 *);
+b53_build_op(read, 64, u64 *);
+
+b53_build_op(write, 8, u8);
+b53_build_op(write, 16, u16);
+b53_build_op(write, 32, u32);
+b53_build_op(write, 48, u64);
+b53_build_op(write, 64, u64);
 
 struct b53_arl_entry {
 	u8 port;
-- 
2.9.3

[PATCH net-next v2 06/12] net: dsa: b53: Move Broadcom header setup to b53

[Florian Fainelli]

The code to enable Broadcom tags/headers is largely switch independent,
and in preparation for enabling it for multiple devices with b53, move
the code we have in bcm_sf2.c to b53_common.c

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 47 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/b53/b53_priv.h   |  1 +
 drivers/net/dsa/b53/b53_regs.h   |  7 ++++++
 drivers/net/dsa/bcm_sf2.c        | 43 ++----------------------------------
 drivers/net/dsa/bcm_sf2_regs.h   |  8 -------
 5 files changed, 57 insertions(+), 49 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3297af6aab8a..aa2187c71ea5 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -538,6 +538,53 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 }
 
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
+{
+	struct b53_device *dev = ds->priv;
+	u8 hdr_ctl, val;
+	u16 reg;
+
+	/* Resolve which bit controls the Broadcom tag */
+	switch (port) {
+	case 8:
+		val = BRCM_HDR_P8_EN;
+		break;
+	case 7:
+		val = BRCM_HDR_P7_EN;
+		break;
+	case 5:
+		val = BRCM_HDR_P5_EN;
+		break;
+	default:
+		val = 0;
+		break;
+	}
+
+	/* Enable Broadcom tags for IMP port */
+	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
+	hdr_ctl |= val;
+	b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
+
+	/* Registers below are only accessible on newer devices */
+	if (!is58xx(dev))
+		return;
+
+	/* Enable reception Broadcom tag for CPU TX (switch RX) to
+	 * allow us to tag outgoing frames
+	 */
+	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
+	reg &= ~BIT(port);
+	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
+
+	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
+	 * allow delivering frames to the per-port net_devices
+	 */
+	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
+	reg &= ~BIT(port);
+	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
+}
+EXPORT_SYMBOL(b53_brcm_hdr_setup);
+
 static void b53_enable_cpu_port(struct b53_device *dev, int port)
 {
 	u8 port_ctrl;
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index f1136619e0e4..44297b7c3795 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -309,5 +309,6 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
 void b53_mirror_del(struct dsa_switch *ds, int port,
 		    struct dsa_mall_mirror_tc_entry *mirror);
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
 
 #endif
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index e5c86d44667a..5e8b8e31fee8 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -210,6 +210,7 @@
 #define B53_BRCM_HDR			0x03
 #define   BRCM_HDR_P8_EN		BIT(0) /* Enable tagging on port 8 */
 #define   BRCM_HDR_P5_EN		BIT(1) /* Enable tagging on port 5 */
+#define   BRCM_HDR_P7_EN		BIT(2) /* Enable tagging on port 7 */
 
 /* Mirror capture control register (16 bit) */
 #define B53_MIR_CAP_CTL			0x10
@@ -249,6 +250,12 @@
 /* Revision ID register (8 bit) */
 #define B53_REV_ID			0x40
 
+/* Broadcom header RX control (16 bit) */
+#define B53_BRCM_HDR_RX_DIS		0x60
+
+/* Broadcom header TX control (16 bit)	*/
+#define B53_BRCM_HDR_TX_DIS		0x62
+
 /*************************************************************************
  * ARL Access Page Registers
  *************************************************************************/
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8acbd17bc1fd..49cb51223f70 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -60,45 +60,6 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 	}
 }
 
-static void bcm_sf2_brcm_hdr_setup(struct bcm_sf2_priv *priv, int port)
-{
-	u32 reg, val;
-
-	/* Resolve which bit controls the Broadcom tag */
-	switch (port) {
-	case 8:
-		val = BRCM_HDR_EN_P8;
-		break;
-	case 7:
-		val = BRCM_HDR_EN_P7;
-		break;
-	case 5:
-		val = BRCM_HDR_EN_P5;
-		break;
-	default:
-		val = 0;
-		break;
-	}
-
-	/* Enable Broadcom tags for IMP port */
-	reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
-	reg |= val;
-	core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
-
-	/* Enable reception Broadcom tag for CPU TX (switch RX) to
-	 * allow us to tag outgoing frames
-	 */
-	reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
-	reg &= ~(1 << port);
-	core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
-
-	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
-	 * allow delivering frames to the per-port net_devices
-	 */
-	reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
-	reg &= ~(1 << port);
-	core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
-}
 
 static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
@@ -138,7 +99,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 		reg |= i << (PRT_TO_QID_SHIFT * i);
 	core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
 
-	bcm_sf2_brcm_hdr_setup(priv, port);
+	b53_brcm_hdr_setup(ds, port);
 
 	/* Force link status for IMP port */
 	reg = core_readl(priv, offset);
@@ -247,7 +208,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 
 	/* Enable Broadcom tags for that port if requested */
 	if (priv->brcm_tag_mask & BIT(port))
-		bcm_sf2_brcm_hdr_setup(priv, port);
+		b53_brcm_hdr_setup(ds, port);
 
 	/* Configure Traffic Class to QoS mapping, allow each priority to map
 	 * to a different queue number
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 49695fcc2ea8..788361ad68a0 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -205,16 +205,8 @@ enum bcm_sf2_reg_offs {
 
 #define CORE_IMP0_PRT_ID		0x0804
 
-#define CORE_BRCM_HDR_CTRL		0x0080c
-#define  BRCM_HDR_EN_P8			(1 << 0)
-#define  BRCM_HDR_EN_P5			(1 << 1)
-#define  BRCM_HDR_EN_P7			(1 << 2)
-
 #define CORE_RST_MIB_CNT_EN		0x0950
 
-#define CORE_BRCM_HDR_RX_DIS		0x0980
-#define CORE_BRCM_HDR_TX_DIS		0x0988
-
 #define CORE_ARLA_VTBL_RWCTRL		0x1600
 #define  ARLA_VTBL_CMD_WRITE		0
 #define  ARLA_VTBL_CMD_READ		1
-- 
2.9.3

[PATCH net-next v2 07/12] net: dsa: b53: Define EEE register page

[Florian Fainelli]

In preparation for migrating the EEE code from bcm_sf2 to b53, define the full
EEE register page and offsets within that page.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_regs.h | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 5e8b8e31fee8..2a9f421680aa 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -50,6 +50,9 @@
 /* Jumbo Frame Registers */
 #define B53_JUMBO_PAGE			0x40
 
+/* EEE Control Registers Page */
+#define B53_EEE_PAGE			0x92
+
 /* CFP Configuration Registers Page */
 #define B53_CFP_PAGE			0xa1
 
@@ -472,6 +475,44 @@
 #define   JMS_MAX_SIZE			9724
 
 /*************************************************************************
+ * EEE Configuration Page Registers
+ *************************************************************************/
+
+/* EEE Enable control register (16 bit) */
+#define B53_EEE_EN_CTRL			0x00
+
+/* EEE LPI assert status register (16 bit) */
+#define B53_EEE_LPI_ASSERT_STS		0x02
+
+/* EEE LPI indicate status register (16 bit) */
+#define B53_EEE_LPI_INDICATE		0x4
+
+/* EEE Receiving idle symbols status register (16 bit) */
+#define B53_EEE_RX_IDLE_SYM_STS		0x6
+
+/* EEE Pipeline timer register (32 bit) */
+#define B53_EEE_PIP_TIMER		0xC
+
+/* EEE Sleep timer Gig register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_GIG(i)	(0x10 + 4 * (i))
+
+/* EEE Sleep timer FE register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_FE(i)	(0x34 + 4 * (i))
+
+/* EEE Minimum LP timer Gig register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_GIG(i)	(0x58 + 4 * (i))
+
+/* EEE Minimum LP timer FE register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_FE(i)	(0x7c + 4 * (i))
+
+/* EEE Wake timer Gig register (16 bit) */
+#define B53_EEE_WAKE_TIMER_GIG(i)	(0xa0 + 2 * (i))
+
+/* EEE Wake timer FE register (16 bit) */
+#define B53_EEE_WAKE_TIMER_FE(i)	(0xb2 + 2 * (i))
+
+
+/*************************************************************************
  * CFP Configuration Page Registers
  *************************************************************************/
 
-- 
2.9.3

[PATCH net-next v2 08/12] net: dsa: b53: Move EEE functions to b53

[Florian Fainelli]

Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared
code amongst Gigabit capable switch, only 5325 and 5365 are too old to support
that.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 63 ++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/b53/b53_priv.h   |  5 +++
 drivers/net/dsa/bcm_sf2.c        | 66 ++++------------------------------------
 drivers/net/dsa/bcm_sf2.h        |  2 --
 drivers/net/dsa/bcm_sf2_regs.h   |  3 --
 5 files changed, 74 insertions(+), 65 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index aa2187c71ea5..491e4ffa8a0e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1531,6 +1531,69 @@ void b53_mirror_del(struct dsa_switch *ds, int port,
 }
 EXPORT_SYMBOL(b53_mirror_del);
 
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+	struct b53_device *dev = ds->priv;
+	u16 reg;
+
+	b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
+	if (enable)
+		reg |= BIT(port);
+	else
+		reg &= ~BIT(port);
+	b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
+}
+EXPORT_SYMBOL(b53_eee_enable_set);
+
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+	int ret;
+
+	ret = phy_init_eee(phy, 0);
+	if (ret)
+		return 0;
+
+	b53_eee_enable_set(ds, port, true);
+
+	return 1;
+}
+EXPORT_SYMBOL(b53_eee_init);
+
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
+	u16 reg;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
+	e->eee_enabled = p->eee_enabled;
+	e->eee_active = !!(reg & BIT(port));
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_get_mac_eee);
+
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
+
+	if (is5325(dev) || is5365(dev))
+		return -EOPNOTSUPP;
+
+	p->eee_enabled = e->eee_enabled;
+	b53_eee_enable_set(ds, port, e->eee_enabled);
+
+	return 0;
+}
+EXPORT_SYMBOL(b53_set_mac_eee);
+
 static const struct dsa_switch_ops b53_switch_ops = {
 	.get_tag_protocol	= b53_get_tag_protocol,
 	.setup			= b53_setup,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 44297b7c3795..0ed59672ef07 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -70,6 +70,7 @@ enum {
 
 struct b53_port {
 	u16		vlan_ctl_mask;
+	struct ethtool_eee eee;
 };
 
 struct b53_vlan {
@@ -310,5 +311,9 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 void b53_mirror_del(struct dsa_switch *ds, int port,
 		    struct dsa_mall_mirror_tc_entry *mirror);
 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
 
 #endif
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 49cb51223f70..4e8ef4c07eab 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -107,19 +107,6 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 	core_writel(priv, reg, offset);
 }
 
-static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	u32 reg;
-
-	reg = core_readl(priv, CORE_EEE_EN_CTRL);
-	if (enable)
-		reg |= 1 << port;
-	else
-		reg &= ~(1 << port);
-	core_writel(priv, reg, CORE_EEE_EN_CTRL);
-}
-
 static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
@@ -256,8 +243,8 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	bcm_sf2_imp_vlan_setup(ds, cpu_port);
 
 	/* If EEE was enabled, restore it */
-	if (priv->port_sts[port].eee.eee_enabled)
-		bcm_sf2_eee_enable_set(ds, port, true);
+	if (priv->dev->ports[port].eee.eee_enabled)
+		b53_eee_enable_set(ds, port, true);
 
 	return 0;
 }
@@ -292,47 +279,6 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
 	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
 }
 
-/* Returns 0 if EEE was not enabled, or 1 otherwise
- */
-static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
-			    struct phy_device *phy)
-{
-	int ret;
-
-	ret = phy_init_eee(phy, 0);
-	if (ret)
-		return 0;
-
-	bcm_sf2_eee_enable_set(ds, port, true);
-
-	return 1;
-}
-
-static int bcm_sf2_sw_get_mac_eee(struct dsa_switch *ds, int port,
-				  struct ethtool_eee *e)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
-	u32 reg;
-
-	reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
-	e->eee_enabled = p->eee_enabled;
-	e->eee_active = !!(reg & (1 << port));
-
-	return 0;
-}
-
-static int bcm_sf2_sw_set_mac_eee(struct dsa_switch *ds, int port,
-				  struct ethtool_eee *e)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
-
-	p->eee_enabled = e->eee_enabled;
-	bcm_sf2_eee_enable_set(ds, port, e->eee_enabled);
-
-	return 0;
-}
 
 static int bcm_sf2_sw_indir_rw(struct bcm_sf2_priv *priv, int op, int addr,
 			       int regnum, u16 val)
@@ -567,7 +513,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
 				   struct phy_device *phydev)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	struct ethtool_eee *p = &priv->port_sts[port].eee;
+	struct ethtool_eee *p = &priv->dev->ports[port].eee;
 	u32 id_mode_dis = 0, port_mode;
 	const char *str = NULL;
 	u32 reg, offset;
@@ -649,7 +595,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
 	core_writel(priv, reg, offset);
 
 	if (!phydev->is_pseudo_fixed_link)
-		p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
+		p->eee_enabled = b53_eee_init(ds, port, phydev);
 }
 
 static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
@@ -978,8 +924,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
 	.set_wol		= bcm_sf2_sw_set_wol,
 	.port_enable		= bcm_sf2_port_setup,
 	.port_disable		= bcm_sf2_port_disable,
-	.get_mac_eee		= bcm_sf2_sw_get_mac_eee,
-	.set_mac_eee		= bcm_sf2_sw_set_mac_eee,
+	.get_mac_eee		= b53_get_mac_eee,
+	.set_mac_eee		= b53_set_mac_eee,
 	.port_bridge_join	= b53_br_join,
 	.port_bridge_leave	= b53_br_leave,
 	.port_stp_state_set	= b53_br_set_stp_state,
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 02c499f9c56b..1922e027ff59 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -48,8 +48,6 @@ struct bcm_sf2_hw_params {
 
 struct bcm_sf2_port_status {
 	unsigned int link;
-
-	struct ethtool_eee eee;
 };
 
 struct bcm_sf2_cfp_priv {
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 788361ad68a0..d8b8074a47b9 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -244,9 +244,6 @@ enum bcm_sf2_reg_offs {
 
 #define CORE_JOIN_ALL_VLAN_EN		0xd140
 
-#define CORE_EEE_EN_CTRL		0x24800
-#define CORE_EEE_LPI_INDICATE		0x24810
-
 #define CORE_CFP_ACC			0x28000
 #define  OP_STR_DONE			(1 << 0)
 #define  OP_SEL_SHIFT			1
-- 
2.9.3

Re: [PATCH net-next v2 08/12] net: dsa: b53: Move EEE functions to b53

[Vivien Didelot]

Florian Fainelli <f.fainelli@gmail.com> writes:

> Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared
> code amongst Gigabit capable switch, only 5325 and 5365 are too old to support
> that.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

[PATCH net-next v2 09/12] net: dsa: b53: Wire-up EEE

[Florian Fainelli]

Add support for enabling and disabling EEE, as well as re-negotiating it in
.adjust_link() and in .port_enable().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 491e4ffa8a0e..4e37ec27e496 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -523,6 +523,10 @@ static int b53_enable_port(struct dsa_switch *ds, int port,
 
 	b53_imp_vlan_setup(ds, cpu_port);
 
+	/* If EEE was enabled, restore it */
+	if (dev->ports[port].eee.eee_enabled)
+		b53_eee_enable_set(ds, port, true);
+
 	return 0;
 }
 
@@ -879,6 +883,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 			    struct phy_device *phydev)
 {
 	struct b53_device *dev = ds->priv;
+	struct ethtool_eee *p = &dev->ports[port].eee;
 	u8 rgmii_ctrl = 0, reg = 0, off;
 
 	if (!phy_is_pseudo_fixed_link(phydev))
@@ -1000,6 +1005,9 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 			b53_write8(dev, B53_CTRL_PAGE, po_reg, gmii_po);
 		}
 	}
+
+	/* Re-negotiate EEE if it was enabled already */
+	p->eee_enabled = b53_eee_init(ds, port, phydev);
 }
 
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
@@ -1605,6 +1613,8 @@ static const struct dsa_switch_ops b53_switch_ops = {
 	.adjust_link		= b53_adjust_link,
 	.port_enable		= b53_enable_port,
 	.port_disable		= b53_disable_port,
+	.get_mac_eee		= b53_get_mac_eee,
+	.set_mac_eee		= b53_set_mac_eee,
 	.port_bridge_join	= b53_br_join,
 	.port_bridge_leave	= b53_br_leave,
 	.port_stp_state_set	= b53_br_set_stp_state,
-- 
2.9.3

Re: [PATCH net-next v2 09/12] net: dsa: b53: Wire-up EEE

[Vivien Didelot]

Florian Fainelli <f.fainelli@gmail.com> writes:

> Add support for enabling and disabling EEE, as well as re-negotiating it in
> .adjust_link() and in .port_enable().
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

[PATCH net-next v2 10/12] net: dsa: b53: Export b53_imp_vlan_setup()

[Florian Fainelli]

bcm_sf2 and b53 do exactly the same thing, so share that piece.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c |  3 ++-
 drivers/net/dsa/b53/b53_priv.h   |  1 +
 drivers/net/dsa/bcm_sf2.c        | 23 +----------------------
 3 files changed, 4 insertions(+), 23 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 4e37ec27e496..c3f1cd2c33ea 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -484,7 +484,7 @@ static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
 	return b53_flush_arl(dev, FAST_AGE_VLAN);
 }
 
-static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 {
 	struct b53_device *dev = ds->priv;
 	unsigned int i;
@@ -500,6 +500,7 @@ static void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
 	}
 }
+EXPORT_SYMBOL(b53_imp_vlan_setup);
 
 static int b53_enable_port(struct dsa_switch *ds, int port,
 			   struct phy_device *phy)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 0ed59672ef07..df8bea4105e4 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -284,6 +284,7 @@ static inline int b53_switch_get_reset_gpio(struct b53_device *dev)
 #endif
 
 /* Exported functions towards other drivers */
+void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port);
 void b53_get_strings(struct dsa_switch *ds, int port, uint8_t *data);
 void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
 int b53_get_sset_count(struct dsa_switch *ds);
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 4e8ef4c07eab..08639674947a 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -40,27 +40,6 @@ static enum dsa_tag_protocol bcm_sf2_sw_get_tag_protocol(struct dsa_switch *ds)
 	return DSA_TAG_PROTO_BRCM;
 }
 
-static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
-{
-	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	unsigned int i;
-	u32 reg;
-
-	/* Enable the IMP Port to be in the same VLAN as the other ports
-	 * on a per-port basis such that we only have Port i and IMP in
-	 * the same VLAN.
-	 */
-	for (i = 0; i < priv->hw_params.num_ports; i++) {
-		if (!((1 << i) & ds->enabled_port_mask))
-			continue;
-
-		reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(i));
-		reg |= (1 << cpu_port);
-		core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(i));
-	}
-}
-
-
 static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
@@ -240,7 +219,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	reg |= priv->dev->ports[port].vlan_ctl_mask;
 	core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
 
-	bcm_sf2_imp_vlan_setup(ds, cpu_port);
+	b53_imp_vlan_setup(ds, cpu_port);
 
 	/* If EEE was enabled, restore it */
 	if (priv->dev->ports[port].eee.eee_enabled)
-- 
2.9.3

Re: [PATCH net-next v2 10/12] net: dsa: b53: Export b53_imp_vlan_setup()

[Vivien Didelot]

Florian Fainelli <f.fainelli@gmail.com> writes:

> bcm_sf2 and b53 do exactly the same thing, so share that piece.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

[PATCH net-next v2 11/12] net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFP

[Florian Fainelli]

The magic number 8 in 3 locations in bcm_sf2_cfp.c actually designates the
number of switch port egress queues, so use that define instead of open-coding
it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2_cfp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index 8a1da7e67707..94649e1481ec 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -144,7 +144,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
 	 * destination port is enabled and that we are within the
 	 * number of ports supported by the switch
 	 */
-	port_num = fs->ring_cookie / 8;
+	port_num = fs->ring_cookie / SF2_NUM_EGRESS_QUEUES;
 
 	if (fs->ring_cookie == RX_CLS_FLOW_DISC ||
 	    !(BIT(port_num) & ds->enabled_port_mask) ||
@@ -280,7 +280,7 @@ static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
 	 * We have a small oddity where Port 6 just does not have a
 	 * valid bit here (so we subtract by one).
 	 */
-	queue_num = fs->ring_cookie % 8;
+	queue_num = fs->ring_cookie % SF2_NUM_EGRESS_QUEUES;
 	if (port_num >= 7)
 		port_num -= 1;
 
@@ -401,7 +401,7 @@ static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port,
 	/* There is no Port 6, so we compensate for that here */
 	if (nfc->fs.ring_cookie >= 6)
 		nfc->fs.ring_cookie++;
-	nfc->fs.ring_cookie *= 8;
+	nfc->fs.ring_cookie *= SF2_NUM_EGRESS_QUEUES;
 
 	/* Extract the destination queue */
 	queue_num = (reg >> NEW_TC_SHIFT) & NEW_TC_MASK;
-- 
2.9.3

Re: [PATCH net-next v2 11/12] net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFP

[Vivien Didelot]

Florian Fainelli <f.fainelli@gmail.com> writes:

> The magic number 8 in 3 locations in bcm_sf2_cfp.c actually designates the
> number of switch port egress queues, so use that define instead of open-coding
> it.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

[PATCH net-next v2 12/12] net: dsa: bcm_sf2: Utilize b53_{enable,disable}_port

[Florian Fainelli]

Export b53_{enable,disable}_port and use these two functions in
bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions
cannot be used without wrapping because we need to manage additional
switch integration details (PHY, Broadcom tag etc.).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c |  8 ++++----
 drivers/net/dsa/b53/b53_priv.h   |  2 ++
 drivers/net/dsa/bcm_sf2.c        | 26 ++------------------------
 3 files changed, 8 insertions(+), 28 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index c3f1cd2c33ea..a9f2a5b55a5e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -502,8 +502,7 @@ void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 }
 EXPORT_SYMBOL(b53_imp_vlan_setup);
 
-static int b53_enable_port(struct dsa_switch *ds, int port,
-			   struct phy_device *phy)
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	struct b53_device *dev = ds->priv;
 	unsigned int cpu_port = dev->cpu_port;
@@ -530,9 +529,9 @@ static int b53_enable_port(struct dsa_switch *ds, int port,
 
 	return 0;
 }
+EXPORT_SYMBOL(b53_enable_port);
 
-static void b53_disable_port(struct dsa_switch *ds, int port,
-			     struct phy_device *phy)
+void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	struct b53_device *dev = ds->priv;
 	u8 reg;
@@ -542,6 +541,7 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
 	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 }
+EXPORT_SYMBOL(b53_disable_port);
 
 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
 {
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index df8bea4105e4..8b5ba78edfd2 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -311,6 +311,8 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
 		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
 void b53_mirror_del(struct dsa_switch *ds, int port,
 		    struct dsa_mall_mirror_tc_entry *mirror);
+int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+void b53_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
 void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
 void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
 int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 08639674947a..0072a959db5b 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -163,7 +163,6 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 			      struct phy_device *phy)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
-	s8 cpu_port = ds->dst->cpu_dp->index;
 	unsigned int i;
 	u32 reg;
 
@@ -184,9 +183,6 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 		reg |= i << (PRT_TO_QID_SHIFT * i);
 	core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
 
-	/* Clear the Rx and Tx disable bits and set to no spanning tree */
-	core_writel(priv, 0, CORE_G_PCTL_PORT(port));
-
 	/* Re-enable the GPHY and re-apply workarounds */
 	if (priv->int_phy_mask & 1 << port && priv->hw_params.num_gphy == 1) {
 		bcm_sf2_gphy_enable_set(ds, true);
@@ -209,23 +205,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
 	if (port == priv->moca_port)
 		bcm_sf2_port_intr_enable(priv, port);
 
-	/* Set this port, and only this one to be in the default VLAN,
-	 * if member of a bridge, restore its membership prior to
-	 * bringing down this port.
-	 */
-	reg = core_readl(priv, CORE_PORT_VLAN_CTL_PORT(port));
-	reg &= ~PORT_VLAN_CTRL_MASK;
-	reg |= (1 << port);
-	reg |= priv->dev->ports[port].vlan_ctl_mask;
-	core_writel(priv, reg, CORE_PORT_VLAN_CTL_PORT(port));
-
-	b53_imp_vlan_setup(ds, cpu_port);
-
-	/* If EEE was enabled, restore it */
-	if (priv->dev->ports[port].eee.eee_enabled)
-		b53_eee_enable_set(ds, port, true);
-
-	return 0;
+	return b53_enable_port(ds, port, phy);
 }
 
 static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
@@ -248,9 +228,7 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
 	else
 		off = CORE_G_PCTL_PORT(port);
 
-	reg = core_readl(priv, off);
-	reg |= RX_DIS | TX_DIS;
-	core_writel(priv, reg, off);
+	b53_disable_port(ds, port, phy);
 
 	/* Power down the port memory */
 	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
-- 
2.9.3

Re: [PATCH net-next v2 12/12] net: dsa: bcm_sf2: Utilize b53_{enable,disable}_port

[Vivien Didelot]

Florian Fainelli <f.fainelli@gmail.com> writes:

> Export b53_{enable,disable}_port and use these two functions in
> bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions
> cannot be used without wrapping because we need to manage additional
> switch integration details (PHY, Broadcom tag etc.).
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>