* [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support
@ 2017-09-20 16:18 Icenowy Zheng
2017-09-20 16:18 ` [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI Icenowy Zheng
` (4 more replies)
0 siblings, 5 replies; 14+ messages in thread
From: Icenowy Zheng @ 2017-09-20 16:18 UTC (permalink / raw)
To: u-boot
This patchset is mainly for Allwinner DE2 HDMI SimpleFB support.
The framebuffer initialized by the Allwinner DE2 driver can be
passed by to the kernel as simplefb, and this can enable the
kernel to display graphics without having full DE2 driver.
Add the suppot of simplefb in DE2 code.
The code to find a simplefb with sunxi extension and a suitable
pipeline is extracted to a new source file in video/sunxi/.
An option is added for device tree simplefb, and furtherly other
simplefb support code should also be converted to it. The
current only user to the CONFIG_VIDEO_DT_SIMPLEFB, Allwinner
DE1 legacy video, has already converted to use the Kconfig
option in this patchset. A cleanup commit is introduced for
this conversion.
Icenowy Zheng (4):
sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
video: sunxi: extract simplefb match code to a new file
video: add an option for video simplefb via DT
sunxi: setup simplefb for Allwinner DE2
arch/arm/mach-sunxi/Kconfig | 31 ++++++++-------
drivers/video/Kconfig | 8 ++++
drivers/video/sunxi/Makefile | 4 +-
drivers/video/sunxi/simplefb_common.c | 30 +++++++++++++++
drivers/video/sunxi/simplefb_common.h | 22 +++++++++++
drivers/video/sunxi/sunxi_de2.c | 72 +++++++++++++++++++++++++++++++++++
drivers/video/sunxi/sunxi_display.c | 13 +------
include/configs/sunxi-common.h | 9 +----
scripts/config_whitelist.txt | 1 -
9 files changed, 155 insertions(+), 35 deletions(-)
create mode 100644 drivers/video/sunxi/simplefb_common.c
create mode 100644 drivers/video/sunxi/simplefb_common.h
--
2.13.5
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
2017-09-20 16:18 [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support Icenowy Zheng
@ 2017-09-20 16:18 ` Icenowy Zheng
2017-09-21 7:40 ` Maxime Ripard
2017-09-20 16:18 ` [U-Boot] [PATCH v5 2/4] video: sunxi: extract simplefb match code to a new file Icenowy Zheng
` (3 subsequent siblings)
4 siblings, 1 reply; 14+ messages in thread
From: Icenowy Zheng @ 2017-09-20 16:18 UTC (permalink / raw)
To: u-boot
The sunxi DE1 video option used to be CONFIG_VIDEO, which has the same
name as the "Enable legacy video support" option in
drivers/video/Kconfig.
Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
when CONFIG_VIDEO is selected before this change. Now CONFIG_VIDEO_SUNXI
selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig and
config headers are all converted to use CONFIG_VIDEO_SUNXI.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
arch/arm/mach-sunxi/Kconfig | 29 +++++++++++++++--------------
include/configs/sunxi-common.h | 6 ++----
scripts/config_whitelist.txt | 1 -
3 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2309f59999..3c29fc61f7 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -606,7 +606,7 @@ config AXP_GPIO
---help---
Say Y here to enable support for the gpio pins of the axp PMIC ICs.
-config VIDEO
+config VIDEO_SUNXI
bool "Enable graphical uboot console on HDMI, LCD or VGA"
depends on !MACH_SUN8I_A83T
depends on !MACH_SUNXI_H3_H5
@@ -614,6 +614,7 @@ config VIDEO
depends on !MACH_SUN8I_V3S
depends on !MACH_SUN9I
depends on !MACH_SUN50I
+ select VIDEO
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
@@ -622,21 +623,21 @@ config VIDEO
config VIDEO_HDMI
bool "HDMI output support"
- depends on VIDEO && !MACH_SUN8I
+ depends on VIDEO_SUNXI && !MACH_SUN8I
default y
---help---
Say Y here to add support for outputting video over HDMI.
config VIDEO_VGA
bool "VGA output support"
- depends on VIDEO && (MACH_SUN4I || MACH_SUN7I)
+ depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I)
default n
---help---
Say Y here to add support for outputting video over VGA.
config VIDEO_VGA_VIA_LCD
bool "VGA via LCD controller support"
- depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
+ depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
default n
---help---
Say Y here to add support for external DACs connected to the parallel
@@ -663,14 +664,14 @@ config VIDEO_VGA_EXTERNAL_DAC_EN
config VIDEO_COMPOSITE
bool "Composite video output support"
- depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
+ depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
default n
---help---
Say Y here to add support for outputting composite video.
config VIDEO_LCD_MODE
string "LCD panel timing details"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default ""
---help---
LCD panel timing details string, leave empty if there is no LCD panel.
@@ -680,14 +681,14 @@ config VIDEO_LCD_MODE
config VIDEO_LCD_DCLK_PHASE
int "LCD panel display clock phase"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default 1
---help---
Select LCD panel display clock phase shift, range 0-3.
config VIDEO_LCD_POWER
string "LCD panel power enable pin"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default ""
---help---
Set the power enable pin for the LCD panel. This takes a string in the
@@ -695,7 +696,7 @@ config VIDEO_LCD_POWER
config VIDEO_LCD_RESET
string "LCD panel reset pin"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default ""
---help---
Set the reset pin for the LCD panel. This takes a string in the format
@@ -703,7 +704,7 @@ config VIDEO_LCD_RESET
config VIDEO_LCD_BL_EN
string "LCD panel backlight enable pin"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default ""
---help---
Set the backlight enable pin for the LCD panel. This takes a string in the
@@ -712,7 +713,7 @@ config VIDEO_LCD_BL_EN
config VIDEO_LCD_BL_PWM
string "LCD panel backlight pwm pin"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default ""
---help---
Set the backlight pwm pin for the LCD panel. This takes a string in the
@@ -720,14 +721,14 @@ config VIDEO_LCD_BL_PWM
config VIDEO_LCD_BL_PWM_ACTIVE_LOW
bool "LCD panel backlight pwm is inverted"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default y
---help---
Set this if the backlight pwm output is active low.
config VIDEO_LCD_PANEL_I2C
bool "LCD panel needs to be configured via i2c"
- depends on VIDEO
+ depends on VIDEO_SUNXI
default n
select CMD_I2C
---help---
@@ -776,7 +777,7 @@ config VIDEO_DE2
choice
prompt "LCD panel support"
- depends on VIDEO
+ depends on VIDEO_SUNXI
---help---
Select which type of LCD panel to support.
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 1373b1f037..0f16ea543e 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -266,7 +266,7 @@ extern int soft_i2c_gpio_scl;
/* GPIO */
#define CONFIG_SUNXI_GPIO
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_VIDEO_SUNXI
/*
* The amount of RAM to keep free at the top of RAM when relocating u-boot,
* to use as framebuffer. This must be a multiple of 4096.
@@ -276,8 +276,6 @@ extern int soft_i2c_gpio_scl;
/* Do we want to initialize a simple FB? */
#define CONFIG_VIDEO_DT_SIMPLEFB
-#define CONFIG_VIDEO_SUNXI
-
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_STD_TIMINGS
#define CONFIG_I2C_EDID
@@ -286,7 +284,7 @@ extern int soft_i2c_gpio_scl;
/* allow both serial and cfb console. */
/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
-#endif /* CONFIG_VIDEO */
+#endif /* CONFIG_VIDEO_SUNXI */
/* Ethernet support */
#ifdef CONFIG_SUNXI_EMAC
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 4651bb55e7..9ae774fca7 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -5143,7 +5143,6 @@ CONFIG_VIDEO_MXS
CONFIG_VIDEO_MXS_MODE_SYSTEM
CONFIG_VIDEO_OMAP3
CONFIG_VIDEO_STD_TIMINGS
-CONFIG_VIDEO_SUNXI
CONFIG_VIDEO_VCXK
CONFIG_VID_FLS_ENV
CONFIG_VM86
--
2.13.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 2/4] video: sunxi: extract simplefb match code to a new file
2017-09-20 16:18 [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support Icenowy Zheng
2017-09-20 16:18 ` [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI Icenowy Zheng
@ 2017-09-20 16:18 ` Icenowy Zheng
2017-09-20 16:18 ` [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT Icenowy Zheng
` (2 subsequent siblings)
4 siblings, 0 replies; 14+ messages in thread
From: Icenowy Zheng @ 2017-09-20 16:18 UTC (permalink / raw)
To: u-boot
As the DE2 simplefb setup code can also benefit from the simplefb match
code, extract it to a new source file.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
Changes in v4:
- Add missing copyright for Luc.
Changes in v3:
- Use /** to start kerndoc.
drivers/video/sunxi/Makefile | 2 +-
drivers/video/sunxi/simplefb_common.c | 30 ++++++++++++++++++++++++++++++
drivers/video/sunxi/simplefb_common.h | 22 ++++++++++++++++++++++
drivers/video/sunxi/sunxi_display.c | 13 ++-----------
4 files changed, 55 insertions(+), 12 deletions(-)
create mode 100644 drivers/video/sunxi/simplefb_common.c
create mode 100644 drivers/video/sunxi/simplefb_common.h
diff --git a/drivers/video/sunxi/Makefile b/drivers/video/sunxi/Makefile
index 0d64c2021f..10862edaca 100644
--- a/drivers/video/sunxi/Makefile
+++ b/drivers/video/sunxi/Makefile
@@ -5,5 +5,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o lcdc.o tve_common.o ../videomodes.o
+obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o simplefb_common.o lcdc.o tve_common.o ../videomodes.o
obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o
diff --git a/drivers/video/sunxi/simplefb_common.c b/drivers/video/sunxi/simplefb_common.c
new file mode 100644
index 0000000000..7befb736da
--- /dev/null
+++ b/drivers/video/sunxi/simplefb_common.c
@@ -0,0 +1,30 @@
+/*
+ * Common code for Allwinner SimpleFB with pipeline.
+ *
+ * (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be>
+ * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <fdtdec.h>
+
+int sunxi_simplefb_fdt_match(void *blob, const char *pipeline)
+{
+ int offset, ret;
+
+ /* Find a prefilled simpefb node, matching out pipeline config */
+ offset = fdt_node_offset_by_compatible(blob, -1,
+ "allwinner,simple-framebuffer");
+ while (offset >= 0) {
+ ret = fdt_stringlist_search(blob, offset, "allwinner,pipeline",
+ pipeline);
+ if (ret == 0)
+ break;
+ offset = fdt_node_offset_by_compatible(blob, offset,
+ "allwinner,simple-framebuffer");
+ }
+
+ return offset;
+}
diff --git a/drivers/video/sunxi/simplefb_common.h b/drivers/video/sunxi/simplefb_common.h
new file mode 100644
index 0000000000..1a2bfabf00
--- /dev/null
+++ b/drivers/video/sunxi/simplefb_common.h
@@ -0,0 +1,22 @@
+/*
+ * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SIMPLEFB_COMMON_H
+#define __SIMPLEFB_COMMON_H
+
+/**
+ * sunxi_simplefb_fdt_match() - match a sunxi simplefb node
+ *
+ * Match a sunxi simplefb device node with a specified pipeline, and
+ * return its offset.
+ *
+ * @blob: device tree blob
+ * @pipeline: display pipeline
+ * @return device node offset in blob, or negative values if failed
+ */
+int sunxi_simplefb_fdt_match(void *blob, const char *pipeline);
+
+#endif
diff --git a/drivers/video/sunxi/sunxi_display.c b/drivers/video/sunxi/sunxi_display.c
index de768ba94a..7f25ed5f26 100644
--- a/drivers/video/sunxi/sunxi_display.c
+++ b/drivers/video/sunxi/sunxi_display.c
@@ -29,6 +29,7 @@
#include "../anx9804.h"
#include "../hitachi_tx18d42vm_lcd.h"
#include "../ssd2828.h"
+#include "simplefb_common.h"
#ifdef CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW
#define PWM_ON 0
@@ -1377,17 +1378,7 @@ int sunxi_simplefb_setup(void *blob)
break;
}
- /* Find a prefilled simpefb node, matching out pipeline config */
- offset = fdt_node_offset_by_compatible(blob, -1,
- "allwinner,simple-framebuffer");
- while (offset >= 0) {
- ret = fdt_stringlist_search(blob, offset, "allwinner,pipeline",
- pipeline);
- if (ret == 0)
- break;
- offset = fdt_node_offset_by_compatible(blob, offset,
- "allwinner,simple-framebuffer");
- }
+ offset = sunxi_simplefb_fdt_match(blob, pipeline);
if (offset < 0) {
eprintf("Cannot setup simplefb: node not found\n");
return 0; /* Keep older kernels working */
--
2.13.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT
2017-09-20 16:18 [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support Icenowy Zheng
2017-09-20 16:18 ` [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI Icenowy Zheng
2017-09-20 16:18 ` [U-Boot] [PATCH v5 2/4] video: sunxi: extract simplefb match code to a new file Icenowy Zheng
@ 2017-09-20 16:18 ` Icenowy Zheng
2017-09-21 7:30 ` Maxime Ripard
2017-09-20 16:18 ` [U-Boot] [PATCH v5 4/4] sunxi: setup simplefb for Allwinner DE2 Icenowy Zheng
2017-10-09 13:32 ` [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support icenowy at aosc.io
4 siblings, 1 reply; 14+ messages in thread
From: Icenowy Zheng @ 2017-09-20 16:18 UTC (permalink / raw)
To: u-boot
Add an option to indicate that the video driver should setup a SimpleFB
node that passes the video framebuffer initialized by U-Boot to the
operating system kernel.
Currently only the Allwinner DE1 driver uses this option, and the
definition of this option in the sunxi-common.h config header is
converted to an imply of this option from CONFIG_VIDEO_SUNXI.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v5:
- Convert Allwinner DE1 to use the option.
Changes in v4:
- Remove the dependency of VIDEO_DT_SIMPLEFB.
arch/arm/mach-sunxi/Kconfig | 1 +
drivers/video/Kconfig | 8 ++++++++
include/configs/sunxi-common.h | 3 ---
3 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3c29fc61f7..33869a3dde 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -615,6 +615,7 @@ config VIDEO_SUNXI
depends on !MACH_SUN9I
depends on !MACH_SUN50I
select VIDEO
+ imply VIDEO_DT_SIMPLEFB
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 082cc4a528..547d4cc0c7 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -601,4 +601,12 @@ config VIDEO_DW_HDMI
rather requires a SoC-specific glue driver to call it), it
can not be enabled from the configuration menu.
+config VIDEO_DT_SIMPLEFB
+ bool "Enable SimpleFB support for passing framebuffer to OS"
+ help
+ Enables the code to pass the framebuffer to the kernel as a
+ simple framebuffer in the device tree.
+ The video output is initialized by U-Boot, and kept by the
+ kernel.
+
endmenu
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 0f16ea543e..3bae86fa79 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -273,9 +273,6 @@ extern int soft_i2c_gpio_scl;
*/
#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
-/* Do we want to initialize a simple FB? */
-#define CONFIG_VIDEO_DT_SIMPLEFB
-
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_STD_TIMINGS
#define CONFIG_I2C_EDID
--
2.13.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 4/4] sunxi: setup simplefb for Allwinner DE2
2017-09-20 16:18 [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support Icenowy Zheng
` (2 preceding siblings ...)
2017-09-20 16:18 ` [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT Icenowy Zheng
@ 2017-09-20 16:18 ` Icenowy Zheng
2017-10-09 13:32 ` [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support icenowy at aosc.io
4 siblings, 0 replies; 14+ messages in thread
From: Icenowy Zheng @ 2017-09-20 16:18 UTC (permalink / raw)
To: u-boot
As the support of EFI boot on Allwinner H3 is broken, we still need to
use simplefb to pass the framebuffer to Linux.
Add code to setup simplefb for Allwinner DE2 driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
Changes in v4:
- Imply CONFIG_VIDEO_DT_SIMPLEFB.
Changes in v3:
- Extract CONFIG_VIDEO_DT_SIMPLEFB to a Kconfig option.
Changes in v2:
- Extract the simplefb node searching code.
arch/arm/mach-sunxi/Kconfig | 1 +
drivers/video/sunxi/Makefile | 2 +-
drivers/video/sunxi/sunxi_de2.c | 72 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 74 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 33869a3dde..bb57d4ff81 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -770,6 +770,7 @@ config VIDEO_DE2
depends on SUNXI_DE2
select DM_VIDEO
select DISPLAY
+ imply VIDEO_DT_SIMPLEFB
default y
---help---
Say y here if you want to build DE2 video driver which is present on
diff --git a/drivers/video/sunxi/Makefile b/drivers/video/sunxi/Makefile
index 10862edaca..aec32b79b9 100644
--- a/drivers/video/sunxi/Makefile
+++ b/drivers/video/sunxi/Makefile
@@ -6,4 +6,4 @@
#
obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o simplefb_common.o lcdc.o tve_common.o ../videomodes.o
-obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o
+obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o simplefb_common.o lcdc.o ../dw_hdmi.o
diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c
index ee67764ac5..67b937098c 100644
--- a/drivers/video/sunxi/sunxi_de2.c
+++ b/drivers/video/sunxi/sunxi_de2.c
@@ -10,6 +10,8 @@
#include <display.h>
#include <dm.h>
#include <edid.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
#include <video.h>
#include <asm/global_data.h>
#include <asm/io.h>
@@ -17,6 +19,7 @@
#include <asm/arch/display2.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
+#include "simplefb_common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -292,3 +295,72 @@ U_BOOT_DRIVER(sunxi_de2) = {
U_BOOT_DEVICE(sunxi_de2) = {
.name = "sunxi_de2"
};
+
+/*
+ * Simplefb support.
+ */
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB)
+int sunxi_simplefb_setup(void *blob)
+{
+ struct udevice *de2, *hdmi;
+ struct video_priv *de2_priv;
+ struct video_uc_platdata *de2_plat;
+ int mux;
+ int offset, ret;
+ u64 start, size;
+ const char *pipeline = NULL;
+
+ debug("Setting up simplefb\n");
+
+ if (IS_ENABLED(CONFIG_MACH_SUNXI_H3_H5))
+ mux = 0;
+ else
+ mux = 1;
+
+ /* Skip simplefb setting if DE2 / HDMI is not present */
+ ret = uclass_find_device_by_name(UCLASS_VIDEO,
+ "sunxi_de2", &de2);
+ if (ret) {
+ debug("DE2 not present\n");
+ return 0;
+ }
+
+ ret = uclass_find_device_by_name(UCLASS_DISPLAY,
+ "sunxi_dw_hdmi", &hdmi);
+ if (ret) {
+ debug("HDMI not present\n");
+ return 0;
+ }
+
+ if (mux == 0)
+ pipeline = "mixer0-lcd0-hdmi";
+ else
+ pipeline = "mixer1-lcd1-hdmi";
+
+ de2_priv = dev_get_uclass_priv(de2);
+ de2_plat = dev_get_uclass_platdata(de2);
+
+ offset = sunxi_simplefb_fdt_match(blob, pipeline);
+ if (offset < 0) {
+ eprintf("Cannot setup simplefb: node not found\n");
+ return 0; /* Keep older kernels working */
+ }
+
+ start = gd->bd->bi_dram[0].start;
+ size = de2_plat->base - start;
+ ret = fdt_fixup_memory_banks(blob, &start, &size, 1);
+ if (ret) {
+ eprintf("Cannot setup simplefb: Error reserving memory\n");
+ return ret;
+ }
+
+ ret = fdt_setup_simplefb_node(blob, offset, de2_plat->base,
+ de2_priv->xsize, de2_priv->ysize,
+ VNBYTES(de2_priv->bpix) * de2_priv->xsize,
+ "x8r8g8b8");
+ if (ret)
+ eprintf("Cannot setup simplefb: Error setting properties\n");
+
+ return ret;
+}
+#endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */
--
2.13.5
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT
2017-09-20 16:18 ` [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT Icenowy Zheng
@ 2017-09-21 7:30 ` Maxime Ripard
0 siblings, 0 replies; 14+ messages in thread
From: Maxime Ripard @ 2017-09-21 7:30 UTC (permalink / raw)
To: u-boot
On Wed, Sep 20, 2017 at 04:18:21PM +0000, Icenowy Zheng wrote:
> Add an option to indicate that the video driver should setup a SimpleFB
> node that passes the video framebuffer initialized by U-Boot to the
> operating system kernel.
>
> Currently only the Allwinner DE1 driver uses this option, and the
> definition of this option in the sunxi-common.h config header is
> converted to an imply of this option from CONFIG_VIDEO_SUNXI.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170921/e91c887c/attachment.sig>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
2017-09-20 16:18 ` [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI Icenowy Zheng
@ 2017-09-21 7:40 ` Maxime Ripard
2017-09-21 7:48 ` Icenowy Zheng
0 siblings, 1 reply; 14+ messages in thread
From: Maxime Ripard @ 2017-09-21 7:40 UTC (permalink / raw)
To: u-boot
Hi,
On Wed, Sep 20, 2017 at 04:18:19PM +0000, Icenowy Zheng wrote:
> The sunxi DE1 video option used to be CONFIG_VIDEO, which has the same
> name as the "Enable legacy video support" option in
> drivers/video/Kconfig.
>
> Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
> Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
> when CONFIG_VIDEO is selected before this change. Now CONFIG_VIDEO_SUNXI
> selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig and
> config headers are all converted to use CONFIG_VIDEO_SUNXI.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
The patch is fine, but you also seem to imply that it's an issue. It's
not, you can very well define in Kconfig the same symbol in two
different places, and Kconfig will merge the two by itself.
> ---
> arch/arm/mach-sunxi/Kconfig | 29 +++++++++++++++--------------
> include/configs/sunxi-common.h | 6 ++----
> scripts/config_whitelist.txt | 1 -
> 3 files changed, 17 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 2309f59999..3c29fc61f7 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -606,7 +606,7 @@ config AXP_GPIO
> ---help---
> Say Y here to enable support for the gpio pins of the axp PMIC ICs.
>
> -config VIDEO
> +config VIDEO_SUNXI
> bool "Enable graphical uboot console on HDMI, LCD or VGA"
> depends on !MACH_SUN8I_A83T
> depends on !MACH_SUNXI_H3_H5
> @@ -614,6 +614,7 @@ config VIDEO
> depends on !MACH_SUN8I_V3S
> depends on !MACH_SUN9I
> depends on !MACH_SUN50I
> + select VIDEO
> default y
Which means that this was just adding depends on and default to the
existing CONFIG_VIDEO in drivers/video/Kconfig.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170921/0292f0d1/attachment.sig>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
2017-09-21 7:40 ` Maxime Ripard
@ 2017-09-21 7:48 ` Icenowy Zheng
2017-09-21 19:18 ` Maxime Ripard
0 siblings, 1 reply; 14+ messages in thread
From: Icenowy Zheng @ 2017-09-21 7:48 UTC (permalink / raw)
To: u-boot
于 2017年9月21日 GMT+08:00 下午3:40:23, Maxime Ripard <maxime.ripard@free-electrons.com> 写到:
>Hi,
>
>On Wed, Sep 20, 2017 at 04:18:19PM +0000, Icenowy Zheng wrote:
>> The sunxi DE1 video option used to be CONFIG_VIDEO, which has the
>same
>> name as the "Enable legacy video support" option in
>> drivers/video/Kconfig.
>>
>> Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
>> Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
>> when CONFIG_VIDEO is selected before this change. Now
>CONFIG_VIDEO_SUNXI
>> selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig
>and
>> config headers are all converted to use CONFIG_VIDEO_SUNXI.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>
>The patch is fine, but you also seem to imply that it's an issue. It's
>not, you can very well define in Kconfig the same symbol in two
>different places, and Kconfig will merge the two by itself.
So I can drop this patch and simply add "imply
VIDEO_DT_SIMPLEFB" in the VIDEO option at sunxi
Kconfig?
>
>> ---
>> arch/arm/mach-sunxi/Kconfig | 29 +++++++++++++++--------------
>> include/configs/sunxi-common.h | 6 ++----
>> scripts/config_whitelist.txt | 1 -
>> 3 files changed, 17 insertions(+), 19 deletions(-)
>>
>> diff --git a/arch/arm/mach-sunxi/Kconfig
>b/arch/arm/mach-sunxi/Kconfig
>> index 2309f59999..3c29fc61f7 100644
>> --- a/arch/arm/mach-sunxi/Kconfig
>> +++ b/arch/arm/mach-sunxi/Kconfig
>> @@ -606,7 +606,7 @@ config AXP_GPIO
>> ---help---
>> Say Y here to enable support for the gpio pins of the axp PMIC ICs.
>>
>> -config VIDEO
>> +config VIDEO_SUNXI
>> bool "Enable graphical uboot console on HDMI, LCD or VGA"
>> depends on !MACH_SUN8I_A83T
>> depends on !MACH_SUNXI_H3_H5
>> @@ -614,6 +614,7 @@ config VIDEO
>> depends on !MACH_SUN8I_V3S
>> depends on !MACH_SUN9I
>> depends on !MACH_SUN50I
>> + select VIDEO
>> default y
>
>Which means that this was just adding depends on and default to the
>existing CONFIG_VIDEO in drivers/video/Kconfig.
>
>Maxime
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
2017-09-21 7:48 ` Icenowy Zheng
@ 2017-09-21 19:18 ` Maxime Ripard
2017-09-22 6:41 ` [U-Boot] [linux-sunxi] " icenowy at aosc.io
0 siblings, 1 reply; 14+ messages in thread
From: Maxime Ripard @ 2017-09-21 19:18 UTC (permalink / raw)
To: u-boot
On Thu, Sep 21, 2017 at 07:48:20AM +0000, Icenowy Zheng wrote:
>
>
> 于 2017年9月21日 GMT+08:00 下午3:40:23, Maxime Ripard <maxime.ripard@free-electrons.com> 写到:
> >Hi,
> >
> >On Wed, Sep 20, 2017 at 04:18:19PM +0000, Icenowy Zheng wrote:
> >> The sunxi DE1 video option used to be CONFIG_VIDEO, which has the
> >same
> >> name as the "Enable legacy video support" option in
> >> drivers/video/Kconfig.
> >>
> >> Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
> >> Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
> >> when CONFIG_VIDEO is selected before this change. Now
> >CONFIG_VIDEO_SUNXI
> >> selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig
> >and
> >> config headers are all converted to use CONFIG_VIDEO_SUNXI.
> >>
> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> >
> >The patch is fine, but you also seem to imply that it's an issue. It's
> >not, you can very well define in Kconfig the same symbol in two
> >different places, and Kconfig will merge the two by itself.
>
> So I can drop this patch and simply add "imply VIDEO_DT_SIMPLEFB" in
> the VIDEO option at sunxi Kconfig?
I don't see anything wrong with this patch, there's no need to change it.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170921/28e081f1/attachment.sig>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
2017-09-21 19:18 ` Maxime Ripard
@ 2017-09-22 6:41 ` icenowy at aosc.io
2017-09-22 11:57 ` Maxime Ripard
0 siblings, 1 reply; 14+ messages in thread
From: icenowy at aosc.io @ 2017-09-22 6:41 UTC (permalink / raw)
To: u-boot
在 2017-09-22 03:18，Maxime Ripard 写道：
> On Thu, Sep 21, 2017 at 07:48:20AM +0000, Icenowy Zheng wrote:
>>
>>
>> 于 2017年9月21日 GMT+08:00 下午3:40:23, Maxime Ripard
>> <maxime.ripard@free-electrons.com> 写到:
>> >Hi,
>> >
>> >On Wed, Sep 20, 2017 at 04:18:19PM +0000, Icenowy Zheng wrote:
>> >> The sunxi DE1 video option used to be CONFIG_VIDEO, which has the
>> >same
>> >> name as the "Enable legacy video support" option in
>> >> drivers/video/Kconfig.
>> >>
>> >> Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
>> >> Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
>> >> when CONFIG_VIDEO is selected before this change. Now
>> >CONFIG_VIDEO_SUNXI
>> >> selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig
>> >and
>> >> config headers are all converted to use CONFIG_VIDEO_SUNXI.
>> >>
>> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>> >
>> >The patch is fine, but you also seem to imply that it's an issue. It's
>> >not, you can very well define in Kconfig the same symbol in two
>> >different places, and Kconfig will merge the two by itself.
>>
>> So I can drop this patch and simply add "imply VIDEO_DT_SIMPLEFB" in
>> the VIDEO option at sunxi Kconfig?
>
> I don't see anything wrong with this patch, there's no need to change
> it.
So this patchset can be applied if no further rejections?
>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
2017-09-22 6:41 ` [U-Boot] [linux-sunxi] " icenowy at aosc.io
@ 2017-09-22 11:57 ` Maxime Ripard
2017-09-22 14:25 ` icenowy at aosc.io
0 siblings, 1 reply; 14+ messages in thread
From: Maxime Ripard @ 2017-09-22 11:57 UTC (permalink / raw)
To: u-boot
On Fri, Sep 22, 2017 at 06:41:40AM +0000, icenowy at aosc.io wrote:
> 在 2017-09-22 03:18，Maxime Ripard 写道：
> > On Thu, Sep 21, 2017 at 07:48:20AM +0000, Icenowy Zheng wrote:
> > >
> > >
> > > 于 2017年9月21日 GMT+08:00 下午3:40:23, Maxime Ripard
> > > <maxime.ripard@free-electrons.com> 写到:
> > > >Hi,
> > > >
> > > >On Wed, Sep 20, 2017 at 04:18:19PM +0000, Icenowy Zheng wrote:
> > > >> The sunxi DE1 video option used to be CONFIG_VIDEO, which has the
> > > >same
> > > >> name as the "Enable legacy video support" option in
> > > >> drivers/video/Kconfig.
> > > >>
> > > >> Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
> > > >> Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
> > > >> when CONFIG_VIDEO is selected before this change. Now
> > > >CONFIG_VIDEO_SUNXI
> > > >> selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig
> > > >and
> > > >> config headers are all converted to use CONFIG_VIDEO_SUNXI.
> > > >>
> > > >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> > > >
> > > >The patch is fine, but you also seem to imply that it's an issue. It's
> > > >not, you can very well define in Kconfig the same symbol in two
> > > >different places, and Kconfig will merge the two by itself.
> > >
> > > So I can drop this patch and simply add "imply VIDEO_DT_SIMPLEFB" in
> > > the VIDEO option at sunxi Kconfig?
> >
> > I don't see anything wrong with this patch, there's no need to change
> > it.
>
> So this patchset can be applied if no further rejections?
Yes, I'm just waiting for some feedback from the video people.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170922/9453ce0a/attachment.sig>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [linux-sunxi] Re: [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
2017-09-22 11:57 ` Maxime Ripard
@ 2017-09-22 14:25 ` icenowy at aosc.io
0 siblings, 0 replies; 14+ messages in thread
From: icenowy at aosc.io @ 2017-09-22 14:25 UTC (permalink / raw)
To: u-boot
在 2017-09-22 19:57，Maxime Ripard 写道：
> On Fri, Sep 22, 2017 at 06:41:40AM +0000, icenowy at aosc.io wrote:
>> 在 2017-09-22 03:18，Maxime Ripard 写道：
>> > On Thu, Sep 21, 2017 at 07:48:20AM +0000, Icenowy Zheng wrote:
>> > >
>> > >
>> > > 于 2017年9月21日 GMT+08:00 下午3:40:23, Maxime Ripard
>> > > <maxime.ripard@free-electrons.com> 写到:
>> > > >Hi,
>> > > >
>> > > >On Wed, Sep 20, 2017 at 04:18:19PM +0000, Icenowy Zheng wrote:
>> > > >> The sunxi DE1 video option used to be CONFIG_VIDEO, which has the
>> > > >same
>> > > >> name as the "Enable legacy video support" option in
>> > > >> drivers/video/Kconfig.
>> > > >>
>> > > >> Change the option name to CONFIG_VIDEO_SUNXI, which is really used by
>> > > >> Makefile under drivers/video/sunxi/, and defined in sunxi-common.h
>> > > >> when CONFIG_VIDEO is selected before this change. Now
>> > > >CONFIG_VIDEO_SUNXI
>> > > >> selects CONFIG_VIDEO and the usages of CONFIG_VIDEO in sunxi Kconfig
>> > > >and
>> > > >> config headers are all converted to use CONFIG_VIDEO_SUNXI.
>> > > >>
>> > > >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>> > > >
>> > > >The patch is fine, but you also seem to imply that it's an issue. It's
>> > > >not, you can very well define in Kconfig the same symbol in two
>> > > >different places, and Kconfig will merge the two by itself.
>> > >
>> > > So I can drop this patch and simply add "imply VIDEO_DT_SIMPLEFB" in
>> > > the VIDEO option at sunxi Kconfig?
>> >
>> > I don't see anything wrong with this patch, there's no need to change
>> > it.
>>
>> So this patchset can be applied if no further rejections?
>
> Yes, I'm just waiting for some feedback from the video people.
I didn't To: or Cc: them...
But I think U-Boot has Patchwork, right?
>
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support
2017-09-20 16:18 [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support Icenowy Zheng
` (3 preceding siblings ...)
2017-09-20 16:18 ` [U-Boot] [PATCH v5 4/4] sunxi: setup simplefb for Allwinner DE2 Icenowy Zheng
@ 2017-10-09 13:32 ` icenowy at aosc.io
2017-10-26 15:25 ` Anatolij Gustschin
4 siblings, 1 reply; 14+ messages in thread
From: icenowy at aosc.io @ 2017-10-09 13:32 UTC (permalink / raw)
To: u-boot
在 2017-09-21 00:18，Icenowy Zheng 写道：
> This patchset is mainly for Allwinner DE2 HDMI SimpleFB support.
>
> The framebuffer initialized by the Allwinner DE2 driver can be
> passed by to the kernel as simplefb, and this can enable the
> kernel to display graphics without having full DE2 driver.
>
> Add the suppot of simplefb in DE2 code.
>
> The code to find a simplefb with sunxi extension and a suitable
> pipeline is extracted to a new source file in video/sunxi/.
>
> An option is added for device tree simplefb, and furtherly other
> simplefb support code should also be converted to it. The
> current only user to the CONFIG_VIDEO_DT_SIMPLEFB, Allwinner
> DE1 legacy video, has already converted to use the Kconfig
> option in this patchset. A cleanup commit is introduced for
> this conversion.
>
> Icenowy Zheng (4):
> sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI
> video: sunxi: extract simplefb match code to a new file
> video: add an option for video simplefb via DT
> sunxi: setup simplefb for Allwinner DE2
Hello Anatolij,
Could you look at this patchset?
I used to think it as a sunxi-only patchset, so I sent it to the
sunxi maintainers. However, Maxime says that he needs feedback
from video maintainers.
Thanks!
>
> arch/arm/mach-sunxi/Kconfig | 31 ++++++++-------
> drivers/video/Kconfig | 8 ++++
> drivers/video/sunxi/Makefile | 4 +-
> drivers/video/sunxi/simplefb_common.c | 30 +++++++++++++++
> drivers/video/sunxi/simplefb_common.h | 22 +++++++++++
> drivers/video/sunxi/sunxi_de2.c | 72
> +++++++++++++++++++++++++++++++++++
> drivers/video/sunxi/sunxi_display.c | 13 +------
> include/configs/sunxi-common.h | 9 +----
> scripts/config_whitelist.txt | 1 -
> 9 files changed, 155 insertions(+), 35 deletions(-)
> create mode 100644 drivers/video/sunxi/simplefb_common.c
> create mode 100644 drivers/video/sunxi/simplefb_common.h
^ permalink raw reply [flat|nested] 14+ messages in thread
* [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support
2017-10-09 13:32 ` [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support icenowy at aosc.io
@ 2017-10-26 15:25 ` Anatolij Gustschin
0 siblings, 0 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2017-10-26 15:25 UTC (permalink / raw)
To: u-boot
Hi,
On Mon, 09 Oct 2017 21:32:57 +0800
icenowy at aosc.io icenowy at aosc.io wrote:
...
> Hello Anatolij,
>
> Could you look at this patchset?
>
> I used to think it as a sunxi-only patchset, so I sent it to the
> sunxi maintainers. However, Maxime says that he needs feedback
> from video maintainers.
Sorry for delay, I've applied v5 series now. Thanks!
--
Anatolij
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2017-10-26 15:25 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-20 16:18 [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support Icenowy Zheng
2017-09-20 16:18 ` [U-Boot] [PATCH v5 1/4] sunxi: change the DE1 video option to CONFIG_VIDEO_SUNXI Icenowy Zheng
2017-09-21 7:40 ` Maxime Ripard
2017-09-21 7:48 ` Icenowy Zheng
2017-09-21 19:18 ` Maxime Ripard
2017-09-22 6:41 ` [U-Boot] [linux-sunxi] " icenowy at aosc.io
2017-09-22 11:57 ` Maxime Ripard
2017-09-22 14:25 ` icenowy at aosc.io
2017-09-20 16:18 ` [U-Boot] [PATCH v5 2/4] video: sunxi: extract simplefb match code to a new file Icenowy Zheng
2017-09-20 16:18 ` [U-Boot] [PATCH v5 3/4] video: add an option for video simplefb via DT Icenowy Zheng
2017-09-21 7:30 ` Maxime Ripard
2017-09-20 16:18 ` [U-Boot] [PATCH v5 4/4] sunxi: setup simplefb for Allwinner DE2 Icenowy Zheng
2017-10-09 13:32 ` [U-Boot] [PATCH v5 0/4] Allwinner SimpleFB Kconfig cleanup and DE2 SimpleFB support icenowy at aosc.io
2017-10-26 15:25 ` Anatolij Gustschin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.