* Memory hotplug regression in 4.13
@ 2017-09-19 16:41 Seth Forshee
2017-09-20 9:29 ` Michal Hocko
0 siblings, 1 reply; 20+ messages in thread
From: Seth Forshee @ 2017-09-19 16:41 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3307 bytes --]
Hi Michal,
I'm seeing oopses in various locations when hotplugging memory in an x86
vm while running a 32-bit kernel. The config I'm using is attached. To
reproduce I'm using kvm with the memory options "-m
size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
object_add memory-backend-ram,id=mem1,size=512M
device_add pc-dimm,id=dimm1,memdev=mem1
Not long after that I'll see an oops, not always in the same location
but most often in wp_page_copy, like this one:
[ 24.673623] BUG: unable to handle kernel paging request at dffff000
[ 24.675569] IP: wp_page_copy+0xa8/0x660
[ 24.676792] *pdpt = 0000000004d6a001 *pde = 0000000004e6d067
[ 24.676797] *pte = 0000000000000000
[ 24.678522]
[ 24.680066] Oops: 0002 [#1] SMP
[ 24.681037] Modules linked in: ppdev nls_utf8 isofs kvm_intel kvm irqbypass input_leds joydev parport_pc serio_raw i2c_piix4 mac_hid parport qemu_fw_cfg iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs raid10 raid456 async_raid6_rec
ov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear cirrus ttm drm_kms_helper psmouse syscopyarea sysfillrect virtio_blk sysimgblt fb_sys_fops drm virtio_net pata_acpi floppy
[ 24.688918] CPU: 1 PID: 819 Comm: sshd Tainted: G W 4.12.0+ #62
[ 24.690131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 24.691656] task: dbbbcc00 task.stack: dbbea000
[ 24.692484] EIP: wp_page_copy+0xa8/0x660
[ 24.693166] EFLAGS: 00210282 CPU: 1
[ 24.693769] EAX: dffff000 EBX: d2214000 ECX: dffff000 EDX: 0000003e
[ 24.694838] ESI: d2214000 EDI: dffff004 EBP: dbbebe9c ESP: dbbebe60
[ 24.695908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 24.696865] CR0: 80050033 CR2: dffff000 CR3: 1b985b80 CR4: 000006f0
[ 24.697945] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 24.699010] DR6: fffe0ff0 DR7: 00000400
[ 24.699670] Call Trace:
[ 24.700133] do_wp_page+0x83/0x4f0
[ 24.700762] ? kmap_atomic_prot+0x3c/0x100
[ 24.701421] handle_mm_fault+0x95c/0xe50
[ 24.702053] ? default_send_IPI_single+0x2c/0x30
[ 24.702788] ? resched_curr+0x51/0xc0
[ 24.703382] ? check_preempt_curr+0x75/0x80
[ 24.704081] __do_page_fault+0x209/0x500
[ 24.704732] ? kvm_async_pf_task_wake+0x100/0x100
[ 24.705491] trace_do_page_fault+0x3f/0xe0
[ 24.706151] ? kvm_async_pf_task_wake+0x100/0x100
[ 24.706902] do_async_page_fault+0x55/0x70
[ 24.707571] common_exception+0x6c/0x72
[ 24.708212] EIP: 0xb722676a
[ 24.708677] EFLAGS: 00210282 CPU: 1
[ 24.709235] EAX: bfe086e0 EBX: 01200011 ECX: 00000000 EDX: 00000000
[ 24.710222] ESI: 00000000 EDI: 00000426 EBP: bfe08728 ESP: bfe086e0
[ 24.711215] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[ 24.712097] Code: 00 00 8b 4d e8 85 c9 0f 84 1e 05 00 00 8b 45 e8 e8 4e d1 ea ff 89 c3 8b 45 e0 89 de e8 42 d1 ea ff 8b 13 8d 78 04 89 c1 83 e7 fc <89> 10 8b 93 fc 0f 00 00 29 f9 29 ce 81 c1 00 10 00 00 c1 e9 02
[ 24.714927] EIP: wp_page_copy+0xa8/0x660 SS:ESP: 0068:dbbebe60
[ 24.715792] CR2: 00000000dffff000
I ran a bisect and landed on a commit of yours, f1dd2cd13c4b "mm,
memory_hotplug: do not associate hotadded memory to zones until online",
as the first commit with this issue.
Thanks,
Seth
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 210878 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.12.0 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_USERFAULTFD=y
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PC104=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_MEMCG_SYSFS_ON=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
CONFIG_MODULE_SIG_HASH="sha512"
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_SQ is not set
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_MQ_IOSCHED_DEADLINE=m
CONFIG_MQ_IOSCHED_KYBER=m
CONFIG_IOSCHED_BFQ=m
CONFIG_BFQ_GROUP_IOSCHED=y
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
CONFIG_INTEL_RDT_A=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
# CONFIG_X86_INTEL_QUARK is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_X86_32_IRIS=m
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
# CONFIG_QUEUED_LOCK_STAT is not set
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_XEN_PVH=y
CONFIG_KVM_GUEST=y
CONFIG_KVM_DEBUG_FS=y
# CONFIG_LGUEST_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_APB_TIMER=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_X86_LEGACY_VM86=y
CONFIG_VM86=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_ARCH_WANTS_THP_SWAP is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=m
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_INTEL_MPX=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
CONFIG_DPTF_POWER=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
# CONFIG_PMIC_OPREGION is not set
CONFIG_ACPI_CONFIGFS=m
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_SFI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
CONFIG_XEN_PCIDEV_FRONTEND=m
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y
#
# PCI host controller drivers
#
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
# CONFIG_PCI_EPF_TEST is not set
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_ALIX=y
CONFIG_NET5501=y
CONFIG_GEOS=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=m
CONFIG_RAPIDIO_MPORT_CDEV=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_TSI568=m
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_RAPIDIO_RXS_GEN3=m
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
CONFIG_INET_DIAG_DESTROY=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
CONFIG_TCP_CONG_CDG=m
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_IPV6_ILA=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_INLINE=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=m
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=m
CONFIG_NF_TABLES_NETDEV=m
CONFIG_NFT_EXTHDR=m
CONFIG_NFT_META=m
CONFIG_NFT_RT=m
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_SET_RBTREE=m
CONFIG_NFT_SET_HASH=m
CONFIG_NFT_SET_BITMAP=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TABLES_IPV4=m
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=m
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_NAT_MASQUERADE_IPV4=m
CONFIG_NFT_MASQ_IPV4=m
CONFIG_NFT_REDIR_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_NF_NAT_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
CONFIG_NF_NAT_MASQUERADE_IPV6=m
CONFIG_NFT_MASQ_IPV6=m
CONFIG_NFT_REDIR_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NFT_BRIDGE_META=m
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
CONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=m
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_LAN9303=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
# CONFIG_IPDDP is not set
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_PHONET=m
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_EMATCH_CANID=m
CONFIG_NET_EMATCH_IPSET=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
CONFIG_NET_ACT_CONNMARK=m
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=m
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUGFS is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_HSR=m
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
CONFIG_NET_NCSI=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_NET_DROP_MONITOR=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
CONFIG_CAN_VXCAN=m
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
CONFIG_CAN_JANZ_ICAN3=m
CONFIG_PCH_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
CONFIG_CAN_CC770_ISA=m
CONFIG_CAN_CC770_PLATFORM=m
CONFIG_CAN_IFI_CANFD=m
CONFIG_CAN_M_CAN=m
CONFIG_CAN_PEAK_PCIEFD=m
CONFIG_CAN_SJA1000=m
CONFIG_CAN_SJA1000_ISA=m
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_EMS_PCMCIA=m
CONFIG_CAN_EMS_PCI=m
CONFIG_CAN_PEAK_PCMCIA=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PLX_PCI=m
CONFIG_CAN_TSCAN1=m
CONFIG_CAN_SOFTING=m
CONFIG_CAN_SOFTING_CS=m
#
# CAN SPI interfaces
#
CONFIG_CAN_HI311X=m
CONFIG_CAN_MCP251X=m
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
CONFIG_CAN_GS_USB=m
CONFIG_CAN_KVASER_USB=m
CONFIG_CAN_PEAK_USB=m
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_MCBA_USB=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_6LOWPAN=m
CONFIG_BT_LEDS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_QCA=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_SERDEV=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_NOKIA=m
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIUART_INTEL=y
CONFIG_BT_HCIUART_BCM=y
CONFIG_BT_HCIUART_QCA=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIUART_MRVL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
CONFIG_BT_WILINK=m
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_IPV6=y
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=y
CONFIG_AF_KCM=m
CONFIG_STREAM_PARSER=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_CFG80211_WEXT_EXPORT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_MINSTREL_VHT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_NET_9P_XEN=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
CONFIG_NFC_NCI_SPI=m
CONFIG_NFC_NCI_UART=m
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_MEI_PHY=m
CONFIG_NFC_SIM=m
CONFIG_NFC_PORT100=m
CONFIG_NFC_FDP=m
CONFIG_NFC_FDP_I2C=m
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_PN544_MEI=m
CONFIG_NFC_PN533=m
CONFIG_NFC_PN533_USB=m
CONFIG_NFC_PN533_I2C=m
CONFIG_NFC_MICROREAD=m
CONFIG_NFC_MICROREAD_I2C=m
CONFIG_NFC_MICROREAD_MEI=m
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_NFC_MRVL_UART=m
CONFIG_NFC_MRVL_I2C=m
CONFIG_NFC_MRVL_SPI=m
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
CONFIG_NFC_ST_NCI=m
CONFIG_NFC_ST_NCI_I2C=m
CONFIG_NFC_ST_NCI_SPI=m
CONFIG_NFC_NXP_NCI=m
CONFIG_NFC_NXP_NCI_I2C=m
CONFIG_NFC_S3FWRN5=m
CONFIG_NFC_S3FWRN5_I2C=m
CONFIG_NFC_ST95HF=m
CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_DEVLINK=m
CONFIG_MAY_USE_DEVLINK=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# CONFIG_DMA_CMA is not set
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
CONFIG_MTD_GPIO_ADDR=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
CONFIG_MTD_LATCH_ADDR=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_BCH=m
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_GPIO=m
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_DOCG4=m
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_MTK is not set
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_SPI_NOR=m
CONFIG_MTD_MT81xx_NOR=m
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_SPI_INTEL_SPI=m
CONFIG_SPI_INTEL_SPI_PLATFORM=m
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_DAX=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=m
CONFIG_VIRTIO_BLK=m
CONFIG_VIRTIO_BLK_SCSI=y
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_RSXX=m
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
# CONFIG_NVME_TARGET_FCLOOP is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
CONFIG_DUMMY_IRQ=m
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_INTEL_MID_PTI=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_TI_DAC7512=m
CONFIG_VMWARE_BALLOON=m
CONFIG_PCH_PHUB=m
CONFIG_USB_SWITCH_FSA9480=m
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
# CONFIG_PCI_ENDPOINT_TEST is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_93XX46=m
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
CONFIG_INTEL_MEI_TXE=m
CONFIG_VMWARE_VMCI=m
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_VHOST_RING=m
CONFIG_ECHO=m
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not set
CONFIG_SCSI_MVUMI=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ESAS2R=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_SMARTPQI=m
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
CONFIG_SCSI_UFS_DWC_TC_PCI=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
CONFIG_SCSI_UFS_DWC_TC_PLATFORM=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=m
CONFIG_XEN_SCSI_FRONTEND=m
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
CONFIG_SCSI_SNIC=m
# CONFIG_SCSI_SNIC_DEBUG_FS is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_ISCI=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_QEDI=m
CONFIG_QEDF=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_WD719X=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
CONFIG_SCSI_BFA_FC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_CHELSIO_FCOE=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_DWC=m
CONFIG_SATA_DWC_OLD_DMA=y
# CONFIG_SATA_DWC_DEBUG is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PLATFORM=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_WINBOND_VLB=m
#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_ERA=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_IPVLAN=m
CONFIG_IPVTAP=m
CONFIG_VXLAN=m
CONFIG_GENEVE=m
CONFIG_GTP=m
CONFIG_MACSEC=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NET_VRF=m
CONFIG_VSOCKMON=m
CONFIG_SUNGEM_PHY=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=m
CONFIG_CAIF_SPI_SLAVE=m
# CONFIG_CAIF_SPI_SYNC is not set
CONFIG_CAIF_HSI=m
CONFIG_CAIF_VIRTIO=m
#
# Distributed Switch Architecture drivers
#
CONFIG_B53=m
CONFIG_B53_SPI_DRIVER=m
CONFIG_B53_MDIO_DRIVER=m
CONFIG_B53_MMAP_DRIVER=m
CONFIG_B53_SRAB_DRIVER=m
# CONFIG_NET_DSA_LOOP is not set
CONFIG_NET_DSA_MT7530=m
CONFIG_NET_DSA_MV88E6060=m
# CONFIG_MICROCHIP_KSZ is not set
CONFIG_NET_DSA_MV88E6XXX=m
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
CONFIG_NET_DSA_QCA8K=m
CONFIG_NET_DSA_SMSC_LAN9303=m
CONFIG_NET_DSA_SMSC_LAN9303_I2C=m
CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_NET_VENDOR_AGERE=y
CONFIG_ET131X=m
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=m
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_ALTERA_TSE=m
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_LANCE=m
CONFIG_PCNET32=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_NI65=m
CONFIG_AMD_XGBE=m
CONFIG_AMD_XGBE_DCB=y
CONFIG_AMD_XGBE_HAVE_ECC=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_AURORA=y
CONFIG_AURORA_NB8800=m
CONFIG_NET_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MACB_PCI=m
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BCMGENET=m
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_DCB=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4_FCOE=y
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_CS89x0=m
CONFIG_CS89x0_PLATFORM=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_CX_ECAT=m
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=m
CONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not set
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=m
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_E1000E_HWTS=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=m
CONFIG_I40E_DCB=y
CONFIG_I40EVF=m
CONFIG_FM10K=m
CONFIG_NET_VENDOR_I825XX=y
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
# CONFIG_MVNETA_BM is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=m
CONFIG_KS8851=m
CONFIG_KS8851_MLL=m
CONFIG_KSZ884X_PCI=m
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_ENCX24J600=m
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_FEALNX=m
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=m
CONFIG_NS83820=m
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
# CONFIG_NFP_APP_FLOWER is not set
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=m
CONFIG_NE2000=m
CONFIG_NE2K_PCI=m
CONFIG_PCMCIA_PCNET=m
CONFIG_ULTRA=m
CONFIG_WD80x3=m
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=m
CONFIG_NET_VENDOR_OKI=y
CONFIG_PCH_GBE=m
CONFIG_ETHOC=m
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_LL2=y
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_QED_ISCSI=y
CONFIG_QED_FCOE=y
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_QCOM_EMAC=m
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_ATP=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=m
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=m
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=m
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_SMC9194=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_EPIC100=m
CONFIG_SMSC911X=m
# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=m
CONFIG_STMMAC_PLATFORM=m
CONFIG_DWMAC_GENERIC=m
# CONFIG_STMMAC_PCI is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NIU=m
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=m
CONFIG_NET_VENDOR_TI=y
CONFIG_TI_CPSW_ALE=m
CONFIG_TLAN=m
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=m
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=m
CONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_WIZNET_W5100_SPI=m
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_DWC_XLGMAC=m
CONFIG_DWC_XLGMAC_PCI=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_NET_SB1000=m
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BITBANG=m
CONFIG_MDIO_GPIO=m
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
CONFIG_AQUANTIA_PHY=m
CONFIG_AT803X_PHY=m
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
CONFIG_DP83848_PHY=m
CONFIG_DP83867_PHY=m
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
CONFIG_INTEL_XWAY_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=m
CONFIG_MICROCHIP_PHY=m
CONFIG_MICROSEMI_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_TERANETICS_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_XILINX_GMII2RGMII=m
CONFIG_MICREL_KS8995MA=m
CONFIG_PLIP=m
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_LAN78XX=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
CONFIG_USB_NET_CH9200=m
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_ADM8211=m
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not set
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_COMMON_DEBUG=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
# CONFIG_ATH9K_DYNACK is not set
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_PCOEM=y
CONFIG_ATH9K_HTC=m
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_ATH9K_HWRNG=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not set
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=m
CONFIG_ATH6KL_SDIO=m
CONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not set
CONFIG_AR5523=m
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_SDIO is not set
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_TRACING=y
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AT76C50X_USB=m
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_BCDC=y
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCM_TRACING=y
# CONFIG_BRCMDBG is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_AIRO=m
CONFIG_AIRO_CS=m
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options
#
# CONFIG_IWLEGACY_DEBUG is not set
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set
# CONFIG_IWLWIFI_PCIE_RTPM is not set
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
CONFIG_WLAN_VENDOR_INTERSIL=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ORINOCO_USB=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_LIBERTAS_MESH=y
CONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_MWIFIEX_USB=m
CONFIG_MWL8K=m
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_MT7601U=m
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI=m
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=m
CONFIG_RT2800_LIB_MMIO=m
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
CONFIG_RTL_CARDS=m
CONFIG_RTL8192CE=m
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
CONFIG_RTL8723BE=m
CONFIG_RTL8188EE=m
CONFIG_RTL8192EE=m
CONFIG_RTL8821AE=m
CONFIG_RTL8192CU=m
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
CONFIG_RTLWIFI_USB=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8192C_COMMON=m
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
CONFIG_RTL8XXXU=m
CONFIG_RTL8XXXU_UNTESTED=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_RSI_91X=m
# CONFIG_RSI_DEBUGFS is not set
CONFIG_RSI_SDIO=m
CONFIG_RSI_USB=m
CONFIG_WLAN_VENDOR_ST=y
CONFIG_CW1200=m
CONFIG_CW1200_WLAN_SDIO=m
CONFIG_CW1200_WLAN_SPI=m
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WL1251=m
CONFIG_WL1251_SPI=m
CONFIG_WL1251_SDIO=m
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE=m
CONFIG_WLCORE_SDIO=m
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_USB_ZD1201=m
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
CONFIG_PCMCIA_RAYCS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_MAC80211_HWSIM=m
CONFIG_USB_NET_RNDIS_WLAN=m
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
CONFIG_IEEE802154_AT86RF230=m
CONFIG_IEEE802154_AT86RF230_DEBUGFS=y
CONFIG_IEEE802154_MRF24J40=m
CONFIG_IEEE802154_CC2520=m
CONFIG_IEEE802154_ATUSB=m
CONFIG_IEEE802154_ADF7242=m
CONFIG_IEEE802154_CA8210=m
CONFIG_IEEE802154_CA8210_DEBUGFS=y
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_HYPERV_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_ISDN_CAPI=m
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=m
# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not set
CONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_ISDN_HDLC=m
CONFIG_NVM=y
# CONFIG_NVM_DEBUG is not set
CONFIG_NVM_RRPC=m
CONFIG_NVM_PBLK=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=m
CONFIG_KEYBOARD_ADP5520=m
CONFIG_KEYBOARD_ADP5588=m
CONFIG_KEYBOARD_ADP5589=m
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_QT2160=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=m
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=m
CONFIG_KEYBOARD_LM8333=m
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
CONFIG_KEYBOARD_TWL4030=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
# CONFIG_MOUSE_INPORT is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_JOYSTICK_PSXPAD_SPI=m
CONFIG_JOYSTICK_PSXPAD_SPI_FF=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_HANWANG=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=m
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_88PM860X=m
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_AD7877=m
CONFIG_TOUCHSCREEN_AD7879=m
CONFIG_TOUCHSCREEN_AD7879_I2C=m
CONFIG_TOUCHSCREEN_AD7879_SPI=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=m
CONFIG_TOUCHSCREEN_BU21013=m
CONFIG_TOUCHSCREEN_CY8CTMG110=m
CONFIG_TOUCHSCREEN_CYTTSP_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP_SPI=m
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=m
CONFIG_TOUCHSCREEN_DA9034=m
CONFIG_TOUCHSCREEN_DA9052=m
CONFIG_TOUCHSCREEN_DYNAPRO=m
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_ILI210X=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_EKTF2127=m
CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=m
CONFIG_TOUCHSCREEN_WM831X=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_MC13783=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC200X_CORE=m
CONFIG_TOUCHSCREEN_TSC2004=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
CONFIG_TOUCHSCREEN_PCAP=m
CONFIG_TOUCHSCREEN_RM_TS=m
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_SUR40=m
CONFIG_TOUCHSCREEN_SURFACE3_SPI=m
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=m
CONFIG_TOUCHSCREEN_ZET6223=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=m
CONFIG_INPUT_88PM80X_ONKEY=m
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_AD714X_SPI=m
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=m
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MAX77693_HAPTIC=m
CONFIG_INPUT_MAX8925_ONKEY=m
CONFIG_INPUT_MAX8997_HAPTIC=m
CONFIG_INPUT_MC13783_PWRBUTTON=m
CONFIG_INPUT_MMA8450=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
CONFIG_INPUT_GPIO_BEEPER=m
CONFIG_INPUT_GPIO_TILT_POLLED=m
CONFIG_INPUT_GPIO_DECODER=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=m
CONFIG_INPUT_RETU_PWRBUTTON=m
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_AXP20X_PEK=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
CONFIG_INPUT_TWL6040_VIBRA=m
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=m
CONFIG_INPUT_PWM_BEEPER=m
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=m
CONFIG_INPUT_DA9055_ONKEY=m
CONFIG_INPUT_DA9063_ONKEY=m
CONFIG_INPUT_WM831X_ON=m
CONFIG_INPUT_PCAP=m
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_IMS_PCU=m
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
CONFIG_INPUT_SOC_BUTTON_ARRAY=m
CONFIG_INPUT_DRV260X_HAPTICS=m
CONFIG_INPUT_DRV2665_HAPTICS=m
CONFIG_INPUT_DRV2667_HAPTICS=m
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
CONFIG_SERIO_PS2MULT=m
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=m
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=m
CONFIG_SERIAL_8250_MID=m
CONFIG_SERIAL_8250_MOXA=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
CONFIG_SERIAL_MAX3100=m
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX_CORE=m
CONFIG_SERIAL_SC16IS7XX=m
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_SERIAL_ALTERA_JTAGUART=m
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_PCH_UART=m
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=m
CONFIG_SERIAL_MEN_Z135=m
CONFIG_SERIAL_DEV_BUS=m
CONFIG_TTY_PRINTK=y
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_SCR24X=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_XEN=m
CONFIG_TCG_CRB=m
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=m
CONFIG_XILLYBUS_PCIE=m
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
CONFIG_I2C_MUX_PINCTRL=m
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_MUX_MLXCPLD=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_PCI=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_EG20T=m
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=m
CONFIG_I2C_KEMPLD=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_DLN2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_ROBOTFUZZ_OSIF=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_CROS_EC_TUNNEL=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_AXI_SPI_ENGINE=m
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MID_DMA=y
CONFIG_SPI_DW_MMIO=m
CONFIG_SPI_DLN2=m
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=m
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
# CONFIG_SPI_ROCKCHIP is not set
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_TOPCLIFF_PCH=m
CONFIG_SPI_XCOMM=m
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_ZYNQMP_GQSPI=m
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_TLE62X0=m
# CONFIG_SPI_SLAVE is not set
CONFIG_SPMI=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y
#
# HSI controllers
#
#
# HSI clients
#
CONFIG_HSI_CHAR=m
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_PCH=m
CONFIG_PTP_1588_CLOCK_KVM=m
CONFIG_PINCTRL=y
#
# Pin controllers
#
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=m
# CONFIG_PINCTRL_MERRIFIELD is not set
CONFIG_PINCTRL_INTEL=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_SUNRISEPOINT=m
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m
CONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
CONFIG_GPIO_AXP209=m
CONFIG_GPIO_DWAPB=m
CONFIG_GPIO_EXAR=m
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_ICH=m
CONFIG_GPIO_LYNXPOINT=y
CONFIG_GPIO_MENZ127=m
CONFIG_GPIO_MOCKUP=m
CONFIG_GPIO_VX855=m
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
CONFIG_GPIO_104_IDIO_16=m
CONFIG_GPIO_104_IDI_48=m
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_GPIO_MM=m
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=m
CONFIG_GPIO_SCH311X=m
CONFIG_GPIO_WS16C48=m
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_MAX7300=m
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_TPIC2810=m
#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ARIZONA=m
CONFIG_GPIO_CRYSTAL_COVE=m
CONFIG_GPIO_CS5535=m
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_DA9055=m
CONFIG_GPIO_DLN2=m
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_KEMPLD=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
CONFIG_GPIO_MSIC=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_TPS65086=m
CONFIG_GPIO_TPS65218=m
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
CONFIG_GPIO_TPS65912=m
CONFIG_GPIO_TWL4030=m
CONFIG_GPIO_TWL6040=m
CONFIG_GPIO_UCB1400=m
CONFIG_GPIO_WHISKEY_COVE=m
CONFIG_GPIO_WM831X=m
CONFIG_GPIO_WM8350=m
CONFIG_GPIO_WM8994=m
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=m
CONFIG_GPIO_INTEL_MID=y
# CONFIG_GPIO_MERRIFIELD is not set
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_PCH=m
CONFIG_GPIO_PCI_IDIO_16=m
CONFIG_GPIO_RDC321X=m
#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MC33880=m
CONFIG_GPIO_PISOSR=m
#
# SPI or I2C GPIO expanders
#
#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=m
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=m
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=m
CONFIG_TEST_POWER=m
CONFIG_BATTERY_88PM860X=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=m
CONFIG_BATTERY_BQ27XXX=m
CONFIG_BATTERY_BQ27XXX_I2C=m
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9030=m
CONFIG_BATTERY_DA9052=m
CONFIG_CHARGER_DA9150=m
CONFIG_BATTERY_DA9150=m
CONFIG_CHARGER_AXP20X=m
CONFIG_BATTERY_AXP20X=m
CONFIG_AXP20X_POWER=m
CONFIG_AXP288_CHARGER=m
CONFIG_AXP288_FUEL_GAUGE=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_BATTERY_TWL4030_MADC=m
CONFIG_CHARGER_88PM860X=m
CONFIG_CHARGER_PCF50633=m
CONFIG_BATTERY_RX51=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_LP8727=m
CONFIG_CHARGER_LP8788=m
CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LTC3651 is not set
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_MAX8997=m
CONFIG_CHARGER_MAX8998=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24257=m
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_SMB347=m
CONFIG_CHARGER_TPS65090=m
CONFIG_CHARGER_TPS65217=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_RT5033=m
CONFIG_CHARGER_RT9455=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_FTSTEUTATES=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_MAX31790=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_TC654=m
CONFIG_SENSORS_MENF21BMC_HWMON=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_SENSORS_LTC3815=m
CONFIG_SENSORS_MAX16064=m
CONFIG_SENSORS_MAX20751=m
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA3221=m
CONFIG_SENSORS_TC74=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_XGENE=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_THERMAL_EMULATION=y
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m
#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
CONFIG_INT3406_THERMAL=m
CONFIG_INTEL_BXT_PMIC_THERMAL=m
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_GENERIC_ADC_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_SYSFS=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
CONFIG_DA9052_WATCHDOG=m
CONFIG_DA9055_WATCHDOG=m
CONFIG_DA9063_WATCHDOG=m
CONFIG_DA9062_WATCHDOG=m
CONFIG_MENF21BMC_WATCHDOG=m
CONFIG_WDAT_WDT=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_WM8350_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=m
CONFIG_ZIIRAVE_WATCHDOG=m
CONFIG_CADENCE_WATCHDOG=m
CONFIG_DW_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
CONFIG_MAX63XX_WATCHDOG=m
CONFIG_RETU_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_EBC_C384_WDT=m
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_INTEL_SCU_WATCHDOG=y
CONFIG_INTEL_MID_WATCHDOG=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_KEMPLD_WDT=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_INTEL_MEI_WDT=m
CONFIG_NI903X_WDT=m
CONFIG_NIC7018_WDT=m
CONFIG_MEN_A21_WDT=m
CONFIG_XEN_WDT=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC is not set
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=m
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_AXP20X=m
CONFIG_MFD_AXP20X_I2C=m
CONFIG_MFD_CROS_EC=m
CONFIG_MFD_CROS_EC_I2C=m
CONFIG_MFD_CROS_EC_SPI=m
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=m
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=m
CONFIG_MFD_DLN2=m
CONFIG_MFD_MC13XXX=m
CONFIG_MFD_MC13XXX_SPI=m
CONFIG_MFD_MC13XXX_I2C=m
CONFIG_HTC_PASIC3=m
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_BXTWC=m
CONFIG_MFD_INTEL_LPSS=m
CONFIG_MFD_INTEL_LPSS_ACPI=m
CONFIG_MFD_INTEL_LPSS_PCI=m
CONFIG_MFD_INTEL_MSIC=y
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_KEMPLD=m
CONFIG_MFD_88PM800=m
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=m
CONFIG_MFD_MENF21BMC=m
CONFIG_EZX_PCAP=y
CONFIG_MFD_VIPERBOARD=m
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_UCB1400_CORE=m
CONFIG_MFD_RDC321X=m
CONFIG_MFD_RTSX_PCI=m
CONFIG_MFD_RT5033=m
CONFIG_MFD_RTSX_USB=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=m
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=m
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=m
CONFIG_TPS65010=m
CONFIG_TPS6507X=m
CONFIG_MFD_TPS65086=m
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=m
CONFIG_MFD_LM3533=m
CONFIG_MFD_TIMBERDALE=m
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=m
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=m
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=m
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_88PM8607=m
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=m
CONFIG_REGULATOR_AAT2870=m
CONFIG_REGULATOR_AB3100=m
CONFIG_REGULATOR_ARIZONA_LDO1=m
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
CONFIG_REGULATOR_AS3711=m
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_DA903X=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9055=m
CONFIG_REGULATOR_DA9062=m
CONFIG_REGULATOR_DA9063=m
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=m
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LM363X=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LP8788=m
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX8997=m
CONFIG_REGULATOR_MAX8998=m
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_MT6311=m
CONFIG_REGULATOR_MT6323=m
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PALMAS=m
CONFIG_REGULATOR_PCAP=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=m
CONFIG_REGULATOR_PV88090=m
CONFIG_REGULATOR_PWM=m
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_RC5T583=m
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_S2MPA01=m
CONFIG_REGULATOR_S2MPS11=m
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_SKY81452=m
CONFIG_REGULATOR_TPS51632=m
CONFIG_REGULATOR_TPS6105X=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65086=m
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_REGULATOR_TPS6524X=m
CONFIG_REGULATOR_TPS6586X=m
CONFIG_REGULATOR_TPS65910=m
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TPS80031=m
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8350=m
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_WM8994=m
CONFIG_CEC_CORE=m
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CEC_SUPPORT=y
CONFIG_MEDIA_CEC_RC=y
CONFIG_MEDIA_CONTROLLER=y
# CONFIG_MEDIA_CONTROLLER_DVB is not set
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_PCI_SKELETON=m
CONFIG_VIDEO_TUNER=m
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_V4L2_FLASH_LED_CLASS=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=m
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
#
# Media drivers
#
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_RC_DECODERS=y
CONFIG_LIRC=m
CONFIG_IR_LIRC_CODEC=m
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
CONFIG_IR_XMP_DECODER=m
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_HIX5HD2=m
CONFIG_IR_IMON=m
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_SPI=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
CONFIG_IR_IGORPLUGUSB=m
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SIR=m
CONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_DTCS033=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
CONFIG_USB_GSPCA_KINECT=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STK1135=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
CONFIG_USB_GSPCA_TOUPTEK=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=m
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_VIDEO_USBTV=m
#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_STK1160_COMMON=m
CONFIG_VIDEO_STK1160=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_VIDEO_GO7007_LOADER=m
CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m
#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_FRIIO=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
CONFIG_DVB_USB_DVBSKY=m
CONFIG_DVB_USB_ZD1301=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
CONFIG_DVB_AS102=m
#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_V4L2=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
#
# Software defined radio USB devices
#
CONFIG_USB_AIRSPY=m
CONFIG_USB_HACKRF=m
CONFIG_USB_MSI2500=m
#
# USB HDMI CEC adapters
#
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SOLO6X10=m
CONFIG_VIDEO_TW5864=m
CONFIG_VIDEO_TW68=m
CONFIG_VIDEO_TW686X=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
CONFIG_VIDEO_IVTV_ALSA=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DT3155=m
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX25821_ALSA=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7134_GO7007=m
CONFIG_VIDEO_SAA7164=m
CONFIG_VIDEO_COBALT=m
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
CONFIG_DVB_PT3=m
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
CONFIG_DVB_SMIPCIE=m
CONFIG_DVB_NETUP_UNIDVB=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_VIDEO_VIA_CAMERA=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
CONFIG_V4L_TEST_DRIVERS=y
# CONFIG_VIDEO_VIMC is not set
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIVID_CEC=y
CONFIG_VIDEO_VIVID_MAX_DEVS=64
CONFIG_VIDEO_VIM2M=m
CONFIG_DVB_PLATFORM_DRIVERS=y
CONFIG_CEC_PLATFORM_DRIVERS=y
#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=m
CONFIG_I2C_SI470X=m
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI476X=m
CONFIG_USB_MR800=m
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=m
CONFIG_USB_KEENE=m
CONFIG_USB_RAREMONO=m
CONFIG_USB_MA901=m
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_TIMBERDALE=m
CONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_ISA=m
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_ZOLTRIX=m
#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y
CONFIG_VIDEO_V4L2_TPG=m
#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#
CONFIG_VIDEO_ADV7604=m
CONFIG_VIDEO_ADV7842=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
CONFIG_VIDEO_TW9906=m
CONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7511=m
#
# Camera sensor devices
#
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_MT9M111=m
CONFIG_VIDEO_MT9V011=m
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=m
#
# Sensors used on soc_camera driver
#
#
# soc_camera sensor drivers
#
CONFIG_SOC_CAMERA_IMX074=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9T112=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_OV5642=m
CONFIG_SOC_CAMERA_OV6650=m
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_SOC_CAMERA_OV9740=m
CONFIG_SOC_CAMERA_RJ54N1=m
CONFIG_SOC_CAMERA_TW9910=m
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_AS102_FE=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_GP8PSK_FE=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_SP2=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=m
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_MM_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y
CONFIG_DRM_VM=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
CONFIG_DRM_AMDGPU_USERPTR=y
# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
CONFIG_DRM_VGEM=m
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_MEDFIELD=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=m
CONFIG_DRM_HISI_HIBMC=m
CONFIG_DRM_TINYDRM=m
CONFIG_TINYDRM_MIPI_DBI=m
CONFIG_TINYDRM_MI0283QT=m
# CONFIG_DRM_LEGACY is not set
# CONFIG_DRM_LIB_RANDOM is not set
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=m
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_3DFX_I2C is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_SM501=m
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=m
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=m
CONFIG_FB_AUO_K190X=m
CONFIG_FB_AUO_K1900=m
CONFIG_FB_AUO_K1901=m
CONFIG_FB_HYPERV=m
CONFIG_FB_SIMPLE=y
CONFIG_FB_SM712=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
CONFIG_LCD_HX8357=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LM3533=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_PM8941_WLED=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_AAT2870=m
CONFIG_BACKLIGHT_LM3630A=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_LP855X=m
CONFIG_BACKLIGHT_LP8788=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_SKY81452=m
CONFIG_BACKLIGHT_TPS65217=m
CONFIG_BACKLIGHT_AS3711=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=m
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_VGASTATE=m
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_OPL4_LIB_SEQ=m
CONFIG_SND_SBAWE_SEQ=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_WSS_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT1605=m
CONFIG_SND_AZT2316=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8328=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_JAZZ16=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_MSND_PINNACLE=m
CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
CONFIG_SND_DICE=m
CONFIG_SND_OXFW=m
CONFIG_SND_ISIGHT=m
CONFIG_SND_FIREWORKS=m
CONFIG_SND_BEBOB=m
CONFIG_SND_FIREWIRE_DIGI00X=m
CONFIG_SND_FIREWIRE_TASCAM=m
CONFIG_SND_FIREWIRE_MOTU=m
CONFIG_SND_FIREFACE=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_AMD_ACP=m
CONFIG_SND_ATMEL_SOC=m
CONFIG_SND_DESIGNWARE_I2S=m
CONFIG_SND_DESIGNWARE_PCM=y
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
CONFIG_SND_SOC_IMX_AUDMUX=m
CONFIG_SND_I2S_HI6210_I2S=m
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
CONFIG_SND_SOC_IMG_I2S_OUT=m
CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
CONFIG_SND_SOC_IMG_SPDIF_IN=m
CONFIG_SND_SOC_IMG_SPDIF_OUT=m
CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC=m
CONFIG_SND_MFLD_MACHINE=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
CONFIG_SND_SST_IPC=m
CONFIG_SND_SST_IPC_PCI=m
CONFIG_SND_SST_IPC_ACPI=m
CONFIG_SND_SOC_INTEL_SST=m
CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m
CONFIG_SND_SOC_INTEL_SST_ACPI=m
CONFIG_SND_SOC_INTEL_SST_MATCH=m
CONFIG_SND_SOC_INTEL_HASWELL=m
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
CONFIG_SND_SOC_INTEL_SKYLAKE=m
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
CONFIG_SND_SOC_XTFPGA_I2S=m
CONFIG_ZX_TDM=m
CONFIG_SND_SOC_I2C_AND_SPI=m
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
CONFIG_SND_SOC_ADAU1761_SPI=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_AK5386=m
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_BT_SCO=m
CONFIG_SND_SOC_CS35L32=m
CONFIG_SND_SOC_CS35L33=m
CONFIG_SND_SOC_CS35L34=m
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS42L42=m
CONFIG_SND_SOC_CS42L51=m
CONFIG_SND_SOC_CS42L51_I2C=m
CONFIG_SND_SOC_CS42L52=m
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_CS4349=m
CONFIG_SND_SOC_CS53L30=m
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DIO2125=m
CONFIG_SND_SOC_DMIC=m
CONFIG_SND_SOC_HDMI_CODEC=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES8328=m
CONFIG_SND_SOC_ES8328_I2C=m
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_HDAC_HDMI=m
CONFIG_SND_SOC_INNO_RK3036=m
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_MAX98504=m
CONFIG_SND_SOC_MAX98927=m
CONFIG_SND_SOC_MAX9860=m
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
CONFIG_SND_SOC_PCM179X_SPI=m
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT5616=m
CONFIG_SND_SOC_RT5631=m
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=m
CONFIG_SND_SOC_SN95031=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_SSM2602_SPI=m
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
CONFIG_SND_SOC_TAS5086=m
CONFIG_SND_SOC_TAS571X=m
CONFIG_SND_SOC_TAS5720=m
CONFIG_SND_SOC_TFA9879=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC23_I2C=m
CONFIG_SND_SOC_TLV320AIC23_SPI=m
CONFIG_SND_SOC_TLV320AIC31XX=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8737=m
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
CONFIG_SND_SOC_WM8804_SPI=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
CONFIG_SND_SOC_WM8978=m
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=m
CONFIG_AC97_BUS=m
#
# HID support
#
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACCUTOUCH=m
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BETOP_FF=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
CONFIG_HID_PRODIKEYS=m
CONFIG_HID_CMEDIA=m
CONFIG_HID_CP2112=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_GT683R=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
CONFIG_HID_MAYFLASH=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_MAX3421_HCD=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
CONFIG_USB_HCD_BCMA=m
CONFIG_USB_HCD_SSB=m
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USBIP_VUDC=m
# CONFIG_USBIP_DEBUG is not set
CONFIG_USB_MUSB_HDRC=m
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
#
# Platform Glue Layer
#
#
# MUSB DMA mode
#
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_ULPI=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y
#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
CONFIG_USB_DWC2_PCI=m
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=m
CONFIG_USB_CHIPIDEA_PCI=m
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_ULPI=y
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
# CONFIG_USB_ISP1760_GADGET_ROLE is not set
CONFIG_USB_ISP1760_DUAL_ROLE=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
CONFIG_USB_SERIAL_F8153X=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_UPD78F0730=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=m
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_HUB_USB251XB=m
CONFIG_USB_HSIC_USB3503=m
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=m
CONFIG_TAHVO_USB=m
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=m
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y
#
# USB Peripheral Controller
#
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_PXA27X=m
CONFIG_USB_MV_UDC=m
CONFIG_USB_MV_U3D=m
CONFIG_USB_SNP_CORE=m
# CONFIG_USB_M66592 is not set
CONFIG_USB_BDC_UDC=m
#
# Platform Support
#
CONFIG_USB_BDC_PCI=m
CONFIG_USB_AMD5536UDC=m
CONFIG_USB_NET2272=m
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=m
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
# CONFIG_USB_DUMMY_HCD is not set
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_SERIAL=m
CONFIG_USB_F_OBEX=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_PHONET=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
CONFIG_USB_F_MASS_STORAGE=m
CONFIG_USB_F_FS=m
CONFIG_USB_F_UAC1=m
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_UVC=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=m
CONFIG_USB_F_PRINTER=m
CONFIG_USB_F_TCM=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_PHONET=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
CONFIG_USB_CONFIGFS_F_TCM=y
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
# CONFIG_GADGET_UAC1_LEGACY is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FUNCTIONFS=m
CONFIG_USB_FUNCTIONFS_ETH=y
CONFIG_USB_FUNCTIONFS_RNDIS=y
CONFIG_USB_FUNCTIONFS_GENERIC=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_GADGET_TARGET=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_USB_G_NOKIA=m
CONFIG_USB_G_ACM_MS=m
# CONFIG_USB_G_MULTI is not set
CONFIG_USB_G_HID=m
CONFIG_USB_G_DBGP=m
# CONFIG_USB_G_DBGP_PRINTK is not set
CONFIG_USB_G_DBGP_SERIAL=y
CONFIG_USB_G_WEBCAM=m
#
# USB Power Delivery and Type-C drivers
#
CONFIG_TYPEC=m
CONFIG_TYPEC_UCSI=m
CONFIG_UCSI_ACPI=m
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MMC_USDHI6ROL0=m
CONFIG_MMC_REALTEK_PCI=m
CONFIG_MMC_REALTEK_USB=m
CONFIG_MMC_TOSHIBA_PCI=m
CONFIG_MMC_MTK=m
CONFIG_MMC_SDHCI_XENON=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
CONFIG_MS_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3533=m
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=m
CONFIG_LEDS_LP8788=m
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_TLC591XX=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=m
CONFIG_LEDS_MENF21BMC=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_USER=m
CONFIG_LEDS_NIC78BX=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_GHES is not set
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=m
CONFIG_RTC_DRV_88PM80X=m
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABX80X=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1307_HWMON=y
CONFIG_RTC_DRV_DS1307_CENTURY=y
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_LP8788=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_MAX8907=m
CONFIG_RTC_DRV_MAX8925=m
CONFIG_RTC_DRV_MAX8998=m
CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_PALMAS=m
CONFIG_RTC_DRV_TPS6586X=m
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_TPS80031=m
CONFIG_RTC_DRV_RC5T583=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8010=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_S5M=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1302=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_DS1343=m
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=m
CONFIG_RTC_DRV_MAX6916=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RX4581=m
CONFIG_RTC_DRV_RX6110=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_DRV_MCP795=m
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_PCF2127=m
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_VRTC=m
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1685_FAMILY=m
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
# CONFIG_RTC_DS1685_PROC_REGS is not set
# CONFIG_RTC_DS1685_SYSFS_REGS is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
CONFIG_RTC_DRV_DA9055=m
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_AB3100=m
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=m
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_MT6397=m
#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=m
CONFIG_DMA_ACPI=y
CONFIG_INTEL_IDMA64=m
CONFIG_PCH_DMA=m
CONFIG_TIMB_DMA=m
CONFIG_QCOM_HIDMA_MGMT=m
CONFIG_QCOM_HIDMA=m
CONFIG_DW_DMAC_CORE=m
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=m
CONFIG_HSU_DMA=m
CONFIG_HSU_DMA_PCI=m
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_AUXDISPLAY=y
CONFIG_CHARLCD=m
CONFIG_HD44780=m
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=m
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI=m
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=m
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
# CONFIG_HYPERV_TSCPAGE is not set
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SELFBALLOONING=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG_LIMIT=4
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=m
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=m
CONFIG_XEN_GRANT_DEV_ALLOC=m
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_SCSI_BACKEND=m
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_SYMS=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_STAGING=y
CONFIG_PRISM2_USB=m
CONFIG_COMEDI=m
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SSV_DNP=m
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=m
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
CONFIG_COMEDI_DAC02=m
CONFIG_COMEDI_DAS16M1=m
CONFIG_COMEDI_DAS08_ISA=m
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_NI_LABPC_ISA=m
CONFIG_COMEDI_PCMAD=m
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_8255_PCI=m
CONFIG_COMEDI_ADDI_WATCHDOG=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
CONFIG_COMEDI_ADL_PCI7X3X=m
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1720=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=m
CONFIG_COMEDI_ADV_PCI1760=m
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200_PCI=m
CONFIG_COMEDI_AMPLC_PC236_PCI=m
CONFIG_COMEDI_AMPLC_PC263_PCI=m
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
CONFIG_COMEDI_DAS08_PCI=m
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_MF6X4=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIMDAS=m
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_LABPC_PCI=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIOCMD=m
CONFIG_COMEDI_PCMCIA_DRIVERS=m
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_NI_USB6501=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8254=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_ISADMA=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_LABPC_ISADMA=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_RTL8723BS=m
CONFIG_R8712U=m
CONFIG_R8188EU=m
CONFIG_88EU_AP_MODE=y
CONFIG_RTS5208=m
CONFIG_VT6655=m
CONFIG_VT6656=m
#
# IIO staging drivers
#
#
# Accelerometers
#
CONFIG_ADIS16201=m
CONFIG_ADIS16203=m
CONFIG_ADIS16209=m
CONFIG_ADIS16240=m
#
# Analog to digital converters
#
CONFIG_AD7606=m
CONFIG_AD7606_IFACE_PARALLEL=m
CONFIG_AD7606_IFACE_SPI=m
CONFIG_AD7780=m
CONFIG_AD7816=m
CONFIG_AD7192=m
CONFIG_AD7280=m
#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m
#
# Capacitance to digital converters
#
CONFIG_AD7150=m
CONFIG_AD7152=m
CONFIG_AD7746=m
#
# Direct Digital Synthesis
#
CONFIG_AD9832=m
CONFIG_AD9834=m
#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=m
#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m
#
# Light sensors
#
CONFIG_TSL2x7x=m
#
# Active energy metering IC
#
CONFIG_ADE7753=m
CONFIG_ADE7754=m
CONFIG_ADE7758=m
CONFIG_ADE7759=m
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
CONFIG_ADE7854_SPI=m
#
# Resolver to digital converters
#
CONFIG_AD2S90=m
CONFIG_AD2S1200=m
CONFIG_AD2S1210=m
#
# Triggers - standalone
#
CONFIG_FB_SM750=m
CONFIG_FB_XGI=m
#
# Speakup console speech
#
CONFIG_SPEAKUP=m
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
CONFIG_SPEAKUP_SYNTH_APOLLO=m
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
CONFIG_SPEAKUP_SYNTH_BNS=m
CONFIG_SPEAKUP_SYNTH_DECTLK=m
CONFIG_SPEAKUP_SYNTH_DECEXT=m
CONFIG_SPEAKUP_SYNTH_DECPC=m
CONFIG_SPEAKUP_SYNTH_DTLK=m
CONFIG_SPEAKUP_SYNTH_KEYPC=m
CONFIG_SPEAKUP_SYNTH_LTLK=m
CONFIG_SPEAKUP_SYNTH_SOFT=m
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
CONFIG_SPEAKUP_SYNTH_TXPRT=m
CONFIG_SPEAKUP_SYNTH_DUMMY=m
CONFIG_STAGING_MEDIA=y
# CONFIG_INTEL_ATOMISP is not set
CONFIG_I2C_BCM2048=m
CONFIG_DVB_CXD2099=m
CONFIG_LIRC_STAGING=y
CONFIG_LIRC_ZILOG=m
#
# Android
#
CONFIG_LTE_GDM724X=m
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_MTD_SPINAND_MT29F=m
CONFIG_MTD_SPINAND_ONDIEECC=y
CONFIG_LNET=m
CONFIG_LNET_MAX_PAYLOAD=1048576
CONFIG_LNET_SELFTEST=m
CONFIG_LUSTRE_FS=m
CONFIG_LUSTRE_OBD_MAX_IOCTL_BUFFER=8192
# CONFIG_LUSTRE_DEBUG_EXPENSIVE_CHECK is not set
CONFIG_DGNC=m
CONFIG_GS_FPGABOOT=m
CONFIG_FB_TFT=m
CONFIG_FB_TFT_AGM1264K_FL=m
CONFIG_FB_TFT_BD663474=m
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
CONFIG_FB_TFT_HX8357D=m
CONFIG_FB_TFT_ILI9163=m
CONFIG_FB_TFT_ILI9320=m
CONFIG_FB_TFT_ILI9325=m
CONFIG_FB_TFT_ILI9340=m
CONFIG_FB_TFT_ILI9341=m
CONFIG_FB_TFT_ILI9481=m
CONFIG_FB_TFT_ILI9486=m
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
CONFIG_FB_TFT_S6D02A1=m
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SH1106=m
CONFIG_FB_TFT_SSD1289=m
CONFIG_FB_TFT_SSD1305=m
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1325=m
CONFIG_FB_TFT_SSD1331=m
CONFIG_FB_TFT_SSD1351=m
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
CONFIG_FB_TFT_WATTEROTT=m
CONFIG_FB_FLEX=m
CONFIG_FB_TFT_FBTFT_DEVICE=m
CONFIG_WILC1000=m
CONFIG_WILC1000_SDIO=m
CONFIG_WILC1000_SPI=m
CONFIG_WILC1000_HW_OOB_INTR=y
CONFIG_MOST=m
CONFIG_MOSTCORE=m
CONFIG_AIM_CDEV=m
CONFIG_AIM_NETWORK=m
CONFIG_AIM_SOUND=m
CONFIG_AIM_V4L2=m
CONFIG_HDM_DIM2=m
CONFIG_HDM_I2C=m
CONFIG_HDM_USB=m
CONFIG_KS7010=m
CONFIG_GREYBUS=m
CONFIG_GREYBUS_ES2=m
CONFIG_GREYBUS_AUDIO=m
CONFIG_GREYBUS_BOOTROM=m
CONFIG_GREYBUS_FIRMWARE=m
CONFIG_GREYBUS_HID=m
CONFIG_GREYBUS_LIGHT=m
CONFIG_GREYBUS_LOG=m
CONFIG_GREYBUS_LOOPBACK=m
CONFIG_GREYBUS_POWER=m
CONFIG_GREYBUS_RAW=m
CONFIG_GREYBUS_VIBRATOR=m
CONFIG_GREYBUS_BRIDGED_PHY=m
CONFIG_GREYBUS_GPIO=m
CONFIG_GREYBUS_I2C=m
CONFIG_GREYBUS_PWM=m
CONFIG_GREYBUS_SDIO=m
CONFIG_GREYBUS_SPI=m
CONFIG_GREYBUS_UART=m
CONFIG_GREYBUS_USB=m
#
# USB Power Delivery and Type-C drivers
#
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_TCPCI=m
CONFIG_TYPEC_FUSB302=m
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ALIENWARE_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_LED=m
CONFIG_DELL_SMO8800=m
CONFIG_DELL_RBTN=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
CONFIG_TC1100_WMI=m
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SURFACE3_WMI=m
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ASUS_WIRELESS=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_TOSHIBA_HAPS=m
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_INTEL_CHT_INT33FE=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU_IPC_UTIL=m
CONFIG_INTEL_MID_POWER_BUTTON=m
CONFIG_INTEL_MFLD_THERMAL=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_PMC_CORE=y
CONFIG_IBM_RTL=m
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
CONFIG_INTEL_RST=m
CONFIG_INTEL_SMARTCONNECT=m
CONFIG_PVPANIC=m
CONFIG_INTEL_PMC_IPC=m
CONFIG_INTEL_BXTWC_PMIC_TMU=m
CONFIG_SURFACE_PRO3_BUTTON=m
CONFIG_SURFACE_3_BUTTON=m
CONFIG_INTEL_PUNIT_IPC=m
CONFIG_MLX_CPLD_PLATFORM=m
CONFIG_SILEAD_DMI=y
CONFIG_PMC_ATOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=m
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CROS_EC_CHARDEV=m
CONFIG_CROS_EC_LPC=m
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=m
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=m
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_CDCE706=m
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_COMMON_CLK_S2MPS11=m
CONFIG_CLK_TWL6040=m
# CONFIG_COMMON_CLK_NXP is not set
CONFIG_COMMON_CLK_PALMAS=m
CONFIG_COMMON_CLK_PWM=m
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=m
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=m
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
#
# Broadcom SoC drivers
#
#
# i.MX SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
# CONFIG_SOC_ZTE is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_ARIZONA=m
CONFIG_EXTCON_AXP288=m
CONFIG_EXTCON_GPIO=m
CONFIG_EXTCON_INTEL_INT3496=m
CONFIG_EXTCON_MAX14577=m
CONFIG_EXTCON_MAX3355=m
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_MAX77843=m
CONFIG_EXTCON_MAX8997=m
CONFIG_EXTCON_PALMAS=m
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_MEMORY=y
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m
#
# Accelerometers
#
CONFIG_BMA180=m
CONFIG_BMA220=m
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_DA280=m
CONFIG_DA311=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m
CONFIG_KXSD9=m
CONFIG_KXSD9_SPI=m
CONFIG_KXSD9_I2C=m
CONFIG_KXCJK1013=m
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
CONFIG_MMA7660=m
CONFIG_MMA8452=m
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
CONFIG_MMA9553=m
CONFIG_MXC4005=m
CONFIG_MXC6255=m
CONFIG_SCA3000=m
CONFIG_STK8312=m
CONFIG_STK8BA50=m
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
CONFIG_AD7266=m
CONFIG_AD7291=m
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7766=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
CONFIG_AD7923=m
CONFIG_AD799X=m
CONFIG_AXP20X_ADC=m
CONFIG_AXP288_ADC=m
CONFIG_CC10001_ADC=m
CONFIG_DA9150_GPADC=m
CONFIG_HI8435=m
CONFIG_HX711=m
CONFIG_INA2XX_ADC=m
CONFIG_LP8788_ADC=m
CONFIG_LTC2485=m
CONFIG_LTC2497=m
CONFIG_MAX1027=m
CONFIG_MAX11100=m
CONFIG_MAX1118=m
CONFIG_MAX1363=m
CONFIG_MAX9611=m
CONFIG_MCP320X=m
CONFIG_MCP3422=m
CONFIG_MEN_Z188_ADC=m
CONFIG_NAU7802=m
CONFIG_PALMAS_GPADC=m
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
CONFIG_STX104=m
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC0832=m
# CONFIG_TI_ADC084S021 is not set
CONFIG_TI_ADC12138=m
# CONFIG_TI_ADC108S102 is not set
CONFIG_TI_ADC128S052=m
CONFIG_TI_ADC161S626=m
CONFIG_TI_ADS1015=m
CONFIG_TI_ADS7950=m
CONFIG_TI_AM335X_ADC=m
CONFIG_TI_TLC4541=m
CONFIG_TWL4030_MADC=m
CONFIG_TWL6030_GPADC=m
CONFIG_VIPERBOARD_ADC=m
#
# Amplifiers
#
CONFIG_AD8366=m
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
CONFIG_IAQCORE=m
CONFIG_VZ89X=m
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
CONFIG_IIO_MS_SENSORS_I2C=m
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=m
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m
#
# Counters
#
CONFIG_104_QUAD_8=m
#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
CONFIG_AD5592R_BASE=m
CONFIG_AD5592R=m
CONFIG_AD5593R=m
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
CONFIG_LTC2632=m
CONFIG_AD5686=m
CONFIG_AD5755=m
CONFIG_AD5761=m
CONFIG_AD5764=m
CONFIG_AD5791=m
CONFIG_AD7303=m
CONFIG_CIO_DAC=m
CONFIG_AD8801=m
CONFIG_M62332=m
CONFIG_MAX517=m
CONFIG_MCP4725=m
CONFIG_MCP4922=m
#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=m
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
CONFIG_ADIS16260=m
CONFIG_ADXRS450=m
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=m
CONFIG_MPU3050_I2C=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
CONFIG_ITG3200=m
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=m
CONFIG_AFE4404=m
CONFIG_MAX30100=m
CONFIG_MAX30102=m
#
# Humidity sensors
#
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HDC100X=m
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=m
CONFIG_HTS221_I2C=m
CONFIG_HTS221_SPI=m
CONFIG_HTU21=m
CONFIG_SI7005=m
CONFIG_SI7020=m
#
# Inertial measurement units
#
CONFIG_ADIS16400=m
CONFIG_ADIS16480=m
CONFIG_BMI160=m
CONFIG_BMI160_I2C=m
CONFIG_BMI160_SPI=m
CONFIG_KMX61=m
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_INV_MPU6050_SPI=m
CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_ST_LSM6DSX_I2C=m
CONFIG_IIO_ST_LSM6DSX_SPI=m
CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ACPI_ALS=m
CONFIG_ADJD_S311=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_APDS9960=m
CONFIG_BH1750=m
CONFIG_BH1780=m
CONFIG_CM32181=m
CONFIG_CM3232=m
CONFIG_CM3323=m
CONFIG_CM36651=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_GP2AP020A00F=m
CONFIG_SENSORS_ISL29018=m
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
CONFIG_JSA1212=m
CONFIG_RPR0521=m
CONFIG_SENSORS_LM3533=m
CONFIG_LTR501=m
CONFIG_MAX44000=m
CONFIG_OPT3001=m
CONFIG_PA12203001=m
CONFIG_SI1145=m
CONFIG_STK3310=m
CONFIG_TCS3414=m
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=m
CONFIG_TSL2583=m
CONFIG_TSL4531=m
CONFIG_US5182D=m
CONFIG_VCNL4000=m
CONFIG_VEML6070=m
CONFIG_VL6180=m
#
# Magnetometer sensors
#
CONFIG_AK8975=m
CONFIG_AK09911=m
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
CONFIG_BMC150_MAGN_SPI=m
CONFIG_MAG3110=m
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m
#
# Multiplexers
#
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
CONFIG_IIO_INTERRUPT_TRIGGER=m
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=m
#
# Digital potentiometers
#
CONFIG_DS1803=m
CONFIG_MAX5481=m
CONFIG_MAX5487=m
CONFIG_MCP4131=m
CONFIG_MCP4531=m
CONFIG_TPL0102=m
#
# Digital potentiostats
#
CONFIG_LMP91000=m
#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_HID_SENSOR_PRESS=m
CONFIG_HP03=m
CONFIG_MPL115=m
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=m
CONFIG_MPL3115=m
CONFIG_MS5611=m
CONFIG_MS5611_I2C=m
CONFIG_MS5611_SPI=m
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m
CONFIG_T5403=m
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m
#
# Lightning sensors
#
CONFIG_AS3935=m
#
# Proximity and distance sensors
#
CONFIG_LIDAR_LITE_V2=m
CONFIG_SRF04=m
CONFIG_SX9500=m
CONFIG_SRF08=m
#
# Temperature sensors
#
CONFIG_MAXIM_THERMOCOUPLE=m
CONFIG_HID_SENSOR_TEMP=m
CONFIG_MLX90614=m
CONFIG_TMP006=m
CONFIG_TMP007=m
CONFIG_TSYS01=m
CONFIG_TSYS02D=m
CONFIG_NTB=m
CONFIG_NTB_PINGPONG=m
CONFIG_NTB_TOOL=m
CONFIG_NTB_PERF=m
CONFIG_NTB_TRANSPORT=m
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=m
CONFIG_VME_TSI148=m
CONFIG_VME_FAKE=m
#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m
#
# VME Device Drivers
#
CONFIG_VME_USER=m
CONFIG_VME_PIO2=m
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_CRC=y
CONFIG_PWM_CROS_EC=m
CONFIG_PWM_LP3943=m
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
CONFIG_PWM_PCA9685=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_GEMINI is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=m
CONFIG_FMC_FAKEDEV=m
CONFIG_FMC_TRIVIAL=m
CONFIG_FMC_WRITE_EEPROM=m
CONFIG_FMC_CHARDEV=m
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=m
CONFIG_PHY_PXA_28NM_HSIC=m
CONFIG_PHY_PXA_28NM_USB2=m
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_SAMSUNG_USB2=m
# CONFIG_PHY_EXYNOS4210_USB2 is not set
# CONFIG_PHY_EXYNOS4X12_USB2 is not set
# CONFIG_PHY_EXYNOS5250_USB2 is not set
CONFIG_PHY_TUSB1210=m
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
CONFIG_MCB=m
CONFIG_MCB_PCI=m
CONFIG_MCB_LPC=m
#
# Performance monitor support
#
CONFIG_RAS=y
CONFIG_THUNDERBOLT=m
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_NVMEM=y
CONFIG_STM=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
#
# FPGA Configuration Support
#
CONFIG_FPGA=m
CONFIG_FPGA_MGR_XILINX_SPI=m
CONFIG_ALTERA_PR_IP_CORE=m
#
# FSI support
#
CONFIG_FSI=m
# CONFIG_FSI_MASTER_GPIO is not set
# CONFIG_FSI_MASTER_HUB is not set
# CONFIG_FSI_SCOM is not set
# CONFIG_MULTIPLEXER is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_BOOTLOADER_CONTROL=m
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH=y
CONFIG_EFI_TEST=m
CONFIG_APPLE_PROPERTIES=y
CONFIG_UEFI_CPER=y
CONFIG_EFI_DEV_PATH_PARSER=y
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_NILFS2_FS=m
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FS_ENCRYPTION=y
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_HFSPLUS_FS_POSIX_ACL=y
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
CONFIG_JFFS2_CMODE_FAVOURLZO=y
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_ENCRYPTION=y
CONFIG_UBIFS_FS_SECURITY=y
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_ZLIB_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_EXOFS_FS=m
# CONFIG_EXOFS_DEBUG is not set
CONFIG_ORE=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
CONFIG_NFS_V4_1_MIGRATION=y
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
CONFIG_NFSD_FLEXFILELAYOUT=y
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB2=y
CONFIG_CIFS_SMB311=y
CONFIG_CIFS_FSCACHE=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
CONFIG_9P_FS=m
CONFIG_9P_FSCACHE=y
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_9P_FS_SECURITY=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
CONFIG_SCHED_STACK_END_CHECK=y
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_ENUM_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y
#
# Runtime Testing
#
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_MEMTEST=y
CONFIG_TEST_STATIC_KEYS=m
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_X86_PTDUMP_CORE=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
CONFIG_PUNIT_ATOM_DEBUG=m
#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_WRITABLE_HOOKS is not set
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SMACK=y
# CONFIG_SECURITY_SMACK_BRINGUP is not set
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY is not set
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
# CONFIG_EVM_LOAD_X509 is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="apparmor"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ABLK_HELPER=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
CONFIG_CRYPTO_ENGINE=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_586=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
# CONFIG_LGUEST is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC4=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-09-19 16:41 Memory hotplug regression in 4.13 Seth Forshee
@ 2017-09-20 9:29 ` Michal Hocko
0 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-09-20 9:29 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
Hi,
I am currently at a conference so I will most probably get to this next
week but I will try to ASAP.
On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> Hi Michal,
>
> I'm seeing oopses in various locations when hotplugging memory in an x86
> vm while running a 32-bit kernel. The config I'm using is attached. To
> reproduce I'm using kvm with the memory options "-m
> size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
>
> object_add memory-backend-ram,id=mem1,size=512M
> device_add pc-dimm,id=dimm1,memdev=mem1
>
> Not long after that I'll see an oops, not always in the same location
> but most often in wp_page_copy, like this one:
This is rather surprising. How do you online the memory?
> [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> [ 24.675569] IP: wp_page_copy+0xa8/0x660
could you resolve the IP into the source line?
> [ 24.676792] *pdpt = 0000000004d6a001 *pde = 0000000004e6d067
> [ 24.676797] *pte = 0000000000000000
> [ 24.678522]
> [ 24.680066] Oops: 0002 [#1] SMP
> [ 24.681037] Modules linked in: ppdev nls_utf8 isofs kvm_intel kvm irqbypass input_leds joydev parport_pc serio_raw i2c_piix4 mac_hid parport qemu_fw_cfg iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs raid10 raid456 async_raid6_rec
> ov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear cirrus ttm drm_kms_helper psmouse syscopyarea sysfillrect virtio_blk sysimgblt fb_sys_fops drm virtio_net pata_acpi floppy
> [ 24.688918] CPU: 1 PID: 819 Comm: sshd Tainted: G W 4.12.0+ #62
> [ 24.690131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
> [ 24.691656] task: dbbbcc00 task.stack: dbbea000
> [ 24.692484] EIP: wp_page_copy+0xa8/0x660
> [ 24.693166] EFLAGS: 00210282 CPU: 1
> [ 24.693769] EAX: dffff000 EBX: d2214000 ECX: dffff000 EDX: 0000003e
> [ 24.694838] ESI: d2214000 EDI: dffff004 EBP: dbbebe9c ESP: dbbebe60
> [ 24.695908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [ 24.696865] CR0: 80050033 CR2: dffff000 CR3: 1b985b80 CR4: 000006f0
> [ 24.697945] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [ 24.699010] DR6: fffe0ff0 DR7: 00000400
> [ 24.699670] Call Trace:
> [ 24.700133] do_wp_page+0x83/0x4f0
> [ 24.700762] ? kmap_atomic_prot+0x3c/0x100
> [ 24.701421] handle_mm_fault+0x95c/0xe50
> [ 24.702053] ? default_send_IPI_single+0x2c/0x30
> [ 24.702788] ? resched_curr+0x51/0xc0
> [ 24.703382] ? check_preempt_curr+0x75/0x80
> [ 24.704081] __do_page_fault+0x209/0x500
> [ 24.704732] ? kvm_async_pf_task_wake+0x100/0x100
> [ 24.705491] trace_do_page_fault+0x3f/0xe0
> [ 24.706151] ? kvm_async_pf_task_wake+0x100/0x100
> [ 24.706902] do_async_page_fault+0x55/0x70
> [ 24.707571] common_exception+0x6c/0x72
> [ 24.708212] EIP: 0xb722676a
> [ 24.708677] EFLAGS: 00210282 CPU: 1
> [ 24.709235] EAX: bfe086e0 EBX: 01200011 ECX: 00000000 EDX: 00000000
> [ 24.710222] ESI: 00000000 EDI: 00000426 EBP: bfe08728 ESP: bfe086e0
> [ 24.711215] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
> [ 24.712097] Code: 00 00 8b 4d e8 85 c9 0f 84 1e 05 00 00 8b 45 e8 e8 4e d1 ea ff 89 c3 8b 45 e0 89 de e8 42 d1 ea ff 8b 13 8d 78 04 89 c1 83 e7 fc <89> 10 8b 93 fc 0f 00 00 29 f9 29 ce 81 c1 00 10 00 00 c1 e9 02
> [ 24.714927] EIP: wp_page_copy+0xa8/0x660 SS:ESP: 0068:dbbebe60
> [ 24.715792] CR2: 00000000dffff000
>
> I ran a bisect and landed on a commit of yours, f1dd2cd13c4b "mm,
> memory_hotplug: do not associate hotadded memory to zones until online",
> as the first commit with this issue.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-09-20 9:29 ` Michal Hocko
0 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-09-20 9:29 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
Hi,
I am currently at a conference so I will most probably get to this next
week but I will try to ASAP.
On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> Hi Michal,
>
> I'm seeing oopses in various locations when hotplugging memory in an x86
> vm while running a 32-bit kernel. The config I'm using is attached. To
> reproduce I'm using kvm with the memory options "-m
> size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
>
> object_add memory-backend-ram,id=mem1,size=512M
> device_add pc-dimm,id=dimm1,memdev=mem1
>
> Not long after that I'll see an oops, not always in the same location
> but most often in wp_page_copy, like this one:
This is rather surprising. How do you online the memory?
> [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> [ 24.675569] IP: wp_page_copy+0xa8/0x660
could you resolve the IP into the source line?
> [ 24.676792] *pdpt = 0000000004d6a001 *pde = 0000000004e6d067
> [ 24.676797] *pte = 0000000000000000
> [ 24.678522]
> [ 24.680066] Oops: 0002 [#1] SMP
> [ 24.681037] Modules linked in: ppdev nls_utf8 isofs kvm_intel kvm irqbypass input_leds joydev parport_pc serio_raw i2c_piix4 mac_hid parport qemu_fw_cfg iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs raid10 raid456 async_raid6_rec
> ov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear cirrus ttm drm_kms_helper psmouse syscopyarea sysfillrect virtio_blk sysimgblt fb_sys_fops drm virtio_net pata_acpi floppy
> [ 24.688918] CPU: 1 PID: 819 Comm: sshd Tainted: G W 4.12.0+ #62
> [ 24.690131] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
> [ 24.691656] task: dbbbcc00 task.stack: dbbea000
> [ 24.692484] EIP: wp_page_copy+0xa8/0x660
> [ 24.693166] EFLAGS: 00210282 CPU: 1
> [ 24.693769] EAX: dffff000 EBX: d2214000 ECX: dffff000 EDX: 0000003e
> [ 24.694838] ESI: d2214000 EDI: dffff004 EBP: dbbebe9c ESP: dbbebe60
> [ 24.695908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
> [ 24.696865] CR0: 80050033 CR2: dffff000 CR3: 1b985b80 CR4: 000006f0
> [ 24.697945] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [ 24.699010] DR6: fffe0ff0 DR7: 00000400
> [ 24.699670] Call Trace:
> [ 24.700133] do_wp_page+0x83/0x4f0
> [ 24.700762] ? kmap_atomic_prot+0x3c/0x100
> [ 24.701421] handle_mm_fault+0x95c/0xe50
> [ 24.702053] ? default_send_IPI_single+0x2c/0x30
> [ 24.702788] ? resched_curr+0x51/0xc0
> [ 24.703382] ? check_preempt_curr+0x75/0x80
> [ 24.704081] __do_page_fault+0x209/0x500
> [ 24.704732] ? kvm_async_pf_task_wake+0x100/0x100
> [ 24.705491] trace_do_page_fault+0x3f/0xe0
> [ 24.706151] ? kvm_async_pf_task_wake+0x100/0x100
> [ 24.706902] do_async_page_fault+0x55/0x70
> [ 24.707571] common_exception+0x6c/0x72
> [ 24.708212] EIP: 0xb722676a
> [ 24.708677] EFLAGS: 00210282 CPU: 1
> [ 24.709235] EAX: bfe086e0 EBX: 01200011 ECX: 00000000 EDX: 00000000
> [ 24.710222] ESI: 00000000 EDI: 00000426 EBP: bfe08728 ESP: bfe086e0
> [ 24.711215] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
> [ 24.712097] Code: 00 00 8b 4d e8 85 c9 0f 84 1e 05 00 00 8b 45 e8 e8 4e d1 ea ff 89 c3 8b 45 e0 89 de e8 42 d1 ea ff 8b 13 8d 78 04 89 c1 83 e7 fc <89> 10 8b 93 fc 0f 00 00 29 f9 29 ce 81 c1 00 10 00 00 c1 e9 02
> [ 24.714927] EIP: wp_page_copy+0xa8/0x660 SS:ESP: 0068:dbbebe60
> [ 24.715792] CR2: 00000000dffff000
>
> I ran a bisect and landed on a commit of yours, f1dd2cd13c4b "mm,
> memory_hotplug: do not associate hotadded memory to zones until online",
> as the first commit with this issue.
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-09-20 9:29 ` Michal Hocko
@ 2017-09-21 5:40 ` Seth Forshee
-1 siblings, 0 replies; 20+ messages in thread
From: Seth Forshee @ 2017-09-21 5:40 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
On Wed, Sep 20, 2017 at 11:29:31AM +0200, Michal Hocko wrote:
> Hi,
> I am currently at a conference so I will most probably get to this next
> week but I will try to ASAP.
>
> On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> > Hi Michal,
> >
> > I'm seeing oopses in various locations when hotplugging memory in an x86
> > vm while running a 32-bit kernel. The config I'm using is attached. To
> > reproduce I'm using kvm with the memory options "-m
> > size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
> >
> > object_add memory-backend-ram,id=mem1,size=512M
> > device_add pc-dimm,id=dimm1,memdev=mem1
> >
> > Not long after that I'll see an oops, not always in the same location
> > but most often in wp_page_copy, like this one:
>
> This is rather surprising. How do you online the memory?
The kernel has CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
> > [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> > [ 24.675569] IP: wp_page_copy+0xa8/0x660
>
> could you resolve the IP into the source line?
It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
and the problem still occurs there. It's pointing to the call to
__builtin_memcpy in memcpy (include/linux/string.h line 340), which we
get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
Thanks,
Seth
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-09-21 5:40 ` Seth Forshee
0 siblings, 0 replies; 20+ messages in thread
From: Seth Forshee @ 2017-09-21 5:40 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
On Wed, Sep 20, 2017 at 11:29:31AM +0200, Michal Hocko wrote:
> Hi,
> I am currently at a conference so I will most probably get to this next
> week but I will try to ASAP.
>
> On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> > Hi Michal,
> >
> > I'm seeing oopses in various locations when hotplugging memory in an x86
> > vm while running a 32-bit kernel. The config I'm using is attached. To
> > reproduce I'm using kvm with the memory options "-m
> > size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
> >
> > object_add memory-backend-ram,id=mem1,size=512M
> > device_add pc-dimm,id=dimm1,memdev=mem1
> >
> > Not long after that I'll see an oops, not always in the same location
> > but most often in wp_page_copy, like this one:
>
> This is rather surprising. How do you online the memory?
The kernel has CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
> > [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> > [ 24.675569] IP: wp_page_copy+0xa8/0x660
>
> could you resolve the IP into the source line?
It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
and the problem still occurs there. It's pointing to the call to
__builtin_memcpy in memcpy (include/linux/string.h line 340), which we
get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
Thanks,
Seth
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-09-21 5:40 ` Seth Forshee
@ 2017-09-25 12:58 ` Michal Hocko
-1 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-09-25 12:58 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> On Wed, Sep 20, 2017 at 11:29:31AM +0200, Michal Hocko wrote:
> > Hi,
> > I am currently at a conference so I will most probably get to this next
> > week but I will try to ASAP.
> >
> > On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> > > Hi Michal,
> > >
> > > I'm seeing oopses in various locations when hotplugging memory in an x86
> > > vm while running a 32-bit kernel. The config I'm using is attached. To
> > > reproduce I'm using kvm with the memory options "-m
> > > size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
> > >
> > > object_add memory-backend-ram,id=mem1,size=512M
> > > device_add pc-dimm,id=dimm1,memdev=mem1
> > >
> > > Not long after that I'll see an oops, not always in the same location
> > > but most often in wp_page_copy, like this one:
> >
> > This is rather surprising. How do you online the memory?
>
> The kernel has CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
OK, so the memory gets online automagically at the time when it is
hotadded. Could you send the full dmesg?
> > > [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> > > [ 24.675569] IP: wp_page_copy+0xa8/0x660
> >
> > could you resolve the IP into the source line?
>
> It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> and the problem still occurs there. It's pointing to the call to
> __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
Hmm, this is interesting. That would mean that we have successfully
mapped the destination page but its memory is still not accessible.
Right now I do not see how the patch you have bisected to could make any
difference because it only postponed the onlining to be independent but
your config simply onlines automatically so there shouldn't be any
semantic change. Maybe there is some sort of off-by-one or something.
I will try to investigate some more. Do you think it would be possible
to configure kdump on your system and provide me with the vmcore in some
way?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-09-25 12:58 ` Michal Hocko
0 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-09-25 12:58 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> On Wed, Sep 20, 2017 at 11:29:31AM +0200, Michal Hocko wrote:
> > Hi,
> > I am currently at a conference so I will most probably get to this next
> > week but I will try to ASAP.
> >
> > On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> > > Hi Michal,
> > >
> > > I'm seeing oopses in various locations when hotplugging memory in an x86
> > > vm while running a 32-bit kernel. The config I'm using is attached. To
> > > reproduce I'm using kvm with the memory options "-m
> > > size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
> > >
> > > object_add memory-backend-ram,id=mem1,size=512M
> > > device_add pc-dimm,id=dimm1,memdev=mem1
> > >
> > > Not long after that I'll see an oops, not always in the same location
> > > but most often in wp_page_copy, like this one:
> >
> > This is rather surprising. How do you online the memory?
>
> The kernel has CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
OK, so the memory gets online automagically at the time when it is
hotadded. Could you send the full dmesg?
> > > [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> > > [ 24.675569] IP: wp_page_copy+0xa8/0x660
> >
> > could you resolve the IP into the source line?
>
> It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> and the problem still occurs there. It's pointing to the call to
> __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
Hmm, this is interesting. That would mean that we have successfully
mapped the destination page but its memory is still not accessible.
Right now I do not see how the patch you have bisected to could make any
difference because it only postponed the onlining to be independent but
your config simply onlines automatically so there shouldn't be any
semantic change. Maybe there is some sort of off-by-one or something.
I will try to investigate some more. Do you think it would be possible
to configure kdump on your system and provide me with the vmcore in some
way?
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-09-25 12:58 ` Michal Hocko
@ 2017-12-01 14:23 ` Seth Forshee
-1 siblings, 0 replies; 20+ messages in thread
From: Seth Forshee @ 2017-12-01 14:23 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> > On Wed, Sep 20, 2017 at 11:29:31AM +0200, Michal Hocko wrote:
> > > Hi,
> > > I am currently at a conference so I will most probably get to this next
> > > week but I will try to ASAP.
> > >
> > > On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> > > > Hi Michal,
> > > >
> > > > I'm seeing oopses in various locations when hotplugging memory in an x86
> > > > vm while running a 32-bit kernel. The config I'm using is attached. To
> > > > reproduce I'm using kvm with the memory options "-m
> > > > size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
> > > >
> > > > object_add memory-backend-ram,id=mem1,size=512M
> > > > device_add pc-dimm,id=dimm1,memdev=mem1
> > > >
> > > > Not long after that I'll see an oops, not always in the same location
> > > > but most often in wp_page_copy, like this one:
> > >
> > > This is rather surprising. How do you online the memory?
> >
> > The kernel has CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
>
> OK, so the memory gets online automagically at the time when it is
> hotadded. Could you send the full dmesg?
>
> > > > [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> > > > [ 24.675569] IP: wp_page_copy+0xa8/0x660
> > >
> > > could you resolve the IP into the source line?
> >
> > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > and the problem still occurs there. It's pointing to the call to
> > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
>
> Hmm, this is interesting. That would mean that we have successfully
> mapped the destination page but its memory is still not accessible.
>
> Right now I do not see how the patch you have bisected to could make any
> difference because it only postponed the onlining to be independent but
> your config simply onlines automatically so there shouldn't be any
> semantic change. Maybe there is some sort of off-by-one or something.
>
> I will try to investigate some more. Do you think it would be possible
> to configure kdump on your system and provide me with the vmcore in some
> way?
Sorry, I got busy with other stuff and this kind of fell off my radar.
It came to my attention again recently though.
I was looking through the hotplug rework changes, and I noticed that
32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
rework it doesn't look like it's possible for memory to be associated
with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
and am now no longer seeing the oopses.
I'm sure this isn't the correct fix, but I think it does confirm that
the problem is that the memory should be associated with ZONE_HIGHMEM
but is not.
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index d4b5f29906b9..fddc134c5c3b 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -833,6 +833,12 @@ void __ref move_pfn_range_to_zone(struct zone *zone,
set_zone_contiguous(zone);
}
+#ifdef CONFIG_HIGHMEM
+static enum zone_type default_zone = ZONE_HIGHMEM;
+#else
+static enum zone_type default_zone = ZONE_NORMAL;
+#endif
+
/*
* Returns a default kernel memory zone for the given pfn range.
* If no kernel zone covers this pfn range it will automatically go
@@ -844,14 +850,14 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
struct pglist_data *pgdat = NODE_DATA(nid);
int zid;
- for (zid = 0; zid <= ZONE_NORMAL; zid++) {
+ for (zid = 0; zid <= default_zone; zid++) {
struct zone *zone = &pgdat->node_zones[zid];
if (zone_intersects(zone, start_pfn, nr_pages))
return zone;
}
- return &pgdat->node_zones[ZONE_NORMAL];
+ return &pgdat->node_zones[default_zone];
}
static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-12-01 14:23 ` Seth Forshee
0 siblings, 0 replies; 20+ messages in thread
From: Seth Forshee @ 2017-12-01 14:23 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> > On Wed, Sep 20, 2017 at 11:29:31AM +0200, Michal Hocko wrote:
> > > Hi,
> > > I am currently at a conference so I will most probably get to this next
> > > week but I will try to ASAP.
> > >
> > > On Tue 19-09-17 11:41:14, Seth Forshee wrote:
> > > > Hi Michal,
> > > >
> > > > I'm seeing oopses in various locations when hotplugging memory in an x86
> > > > vm while running a 32-bit kernel. The config I'm using is attached. To
> > > > reproduce I'm using kvm with the memory options "-m
> > > > size=512M,slots=3,maxmem=2G". Then in the qemu monitor I run:
> > > >
> > > > object_add memory-backend-ram,id=mem1,size=512M
> > > > device_add pc-dimm,id=dimm1,memdev=mem1
> > > >
> > > > Not long after that I'll see an oops, not always in the same location
> > > > but most often in wp_page_copy, like this one:
> > >
> > > This is rather surprising. How do you online the memory?
> >
> > The kernel has CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y.
>
> OK, so the memory gets online automagically at the time when it is
> hotadded. Could you send the full dmesg?
>
> > > > [ 24.673623] BUG: unable to handle kernel paging request at dffff000
> > > > [ 24.675569] IP: wp_page_copy+0xa8/0x660
> > >
> > > could you resolve the IP into the source line?
> >
> > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > and the problem still occurs there. It's pointing to the call to
> > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
>
> Hmm, this is interesting. That would mean that we have successfully
> mapped the destination page but its memory is still not accessible.
>
> Right now I do not see how the patch you have bisected to could make any
> difference because it only postponed the onlining to be independent but
> your config simply onlines automatically so there shouldn't be any
> semantic change. Maybe there is some sort of off-by-one or something.
>
> I will try to investigate some more. Do you think it would be possible
> to configure kdump on your system and provide me with the vmcore in some
> way?
Sorry, I got busy with other stuff and this kind of fell off my radar.
It came to my attention again recently though.
I was looking through the hotplug rework changes, and I noticed that
32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
rework it doesn't look like it's possible for memory to be associated
with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
and am now no longer seeing the oopses.
I'm sure this isn't the correct fix, but I think it does confirm that
the problem is that the memory should be associated with ZONE_HIGHMEM
but is not.
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index d4b5f29906b9..fddc134c5c3b 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -833,6 +833,12 @@ void __ref move_pfn_range_to_zone(struct zone *zone,
set_zone_contiguous(zone);
}
+#ifdef CONFIG_HIGHMEM
+static enum zone_type default_zone = ZONE_HIGHMEM;
+#else
+static enum zone_type default_zone = ZONE_NORMAL;
+#endif
+
/*
* Returns a default kernel memory zone for the given pfn range.
* If no kernel zone covers this pfn range it will automatically go
@@ -844,14 +850,14 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
struct pglist_data *pgdat = NODE_DATA(nid);
int zid;
- for (zid = 0; zid <= ZONE_NORMAL; zid++) {
+ for (zid = 0; zid <= default_zone; zid++) {
struct zone *zone = &pgdat->node_zones[zid];
if (zone_intersects(zone, start_pfn, nr_pages))
return zone;
}
- return &pgdat->node_zones[ZONE_NORMAL];
+ return &pgdat->node_zones[default_zone];
}
static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-12-01 14:23 ` Seth Forshee
@ 2017-12-18 14:53 ` Michal Hocko
-1 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-12-18 14:53 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
[...]
> > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > and the problem still occurs there. It's pointing to the call to
> > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> >
> > Hmm, this is interesting. That would mean that we have successfully
> > mapped the destination page but its memory is still not accessible.
> >
> > Right now I do not see how the patch you have bisected to could make any
> > difference because it only postponed the onlining to be independent but
> > your config simply onlines automatically so there shouldn't be any
> > semantic change. Maybe there is some sort of off-by-one or something.
> >
> > I will try to investigate some more. Do you think it would be possible
> > to configure kdump on your system and provide me with the vmcore in some
> > way?
>
> Sorry, I got busy with other stuff and this kind of fell off my radar.
> It came to my attention again recently though.
Apology on my side. This has completely fall of my radar.
> I was looking through the hotplug rework changes, and I noticed that
> 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> rework it doesn't look like it's possible for memory to be associated
> with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> and am now no longer seeing the oopses.
Thanks a lot for debugging! Do I read the above correctly that the
current code simply returns ZONE_NORMAL and maps an unrelated pfn into
this zone and that leads to later blowups? Could you attach the fresh
boot dmesg output please?
> I'm sure this isn't the correct fix, but I think it does confirm that
> the problem is that the memory should be associated with ZONE_HIGHMEM
> but is not.
Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
zone. The kernel cannot access that memory directly. It is essentially a
movable zone from the hotplug API POV. We simply do not have any way to
tell into which zone we want to online this memory range in.
Unfortunately both zones _can_ be present. It would require an explicit
configuration (movable_node and a NUMA hoptlugable nodes running in 32b
or and movable memory configured explicitly on the kernel command line).
The below patch is not really complete but I would rather start simple.
Maybe we do not even have to care as most 32b users will never use both
zones at the same time. I've placed a warning to learn about those.
Does this pass your testing?
---
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 262bfd26baf9..18fec18bdb60 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
return &pgdat->node_zones[ZONE_NORMAL];
}
+static struct zone *default_movable_zone_for_pfn(int nid)
+{
+ /*
+ * Please note that 32b HIGHMEM systems might have 2 movable zones
+ * actually so we have to check for both. This is rather ugly hack
+ * to enforce using Highmem on those systems but we do not have a
+ * good user API to tell into which movable zone we should online.
+ * WARN if we have a movable zone which is not highmem.
+ */
+#ifdef CONFIG_HIGHMEM
+ WARN_ON_ONCE(!zone_movable_is_highmem());
+ return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
+#else
+ return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
+#endif
+}
+
static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
unsigned long nr_pages)
{
struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
nr_pages);
- struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
+ struct zone *movable_zone = default_movable_zone_for_pfn(nid);
bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
@@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
if (online_type == MMOP_ONLINE_MOVABLE)
- return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
+ return default_movable_zone_for_pfn(nid);
return default_zone_for_pfn(nid, start_pfn, nr_pages);
}
--
Michal Hocko
SUSE Labs
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-12-18 14:53 ` Michal Hocko
0 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-12-18 14:53 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
[...]
> > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > and the problem still occurs there. It's pointing to the call to
> > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> >
> > Hmm, this is interesting. That would mean that we have successfully
> > mapped the destination page but its memory is still not accessible.
> >
> > Right now I do not see how the patch you have bisected to could make any
> > difference because it only postponed the onlining to be independent but
> > your config simply onlines automatically so there shouldn't be any
> > semantic change. Maybe there is some sort of off-by-one or something.
> >
> > I will try to investigate some more. Do you think it would be possible
> > to configure kdump on your system and provide me with the vmcore in some
> > way?
>
> Sorry, I got busy with other stuff and this kind of fell off my radar.
> It came to my attention again recently though.
Apology on my side. This has completely fall of my radar.
> I was looking through the hotplug rework changes, and I noticed that
> 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> rework it doesn't look like it's possible for memory to be associated
> with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> and am now no longer seeing the oopses.
Thanks a lot for debugging! Do I read the above correctly that the
current code simply returns ZONE_NORMAL and maps an unrelated pfn into
this zone and that leads to later blowups? Could you attach the fresh
boot dmesg output please?
> I'm sure this isn't the correct fix, but I think it does confirm that
> the problem is that the memory should be associated with ZONE_HIGHMEM
> but is not.
Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
zone. The kernel cannot access that memory directly. It is essentially a
movable zone from the hotplug API POV. We simply do not have any way to
tell into which zone we want to online this memory range in.
Unfortunately both zones _can_ be present. It would require an explicit
configuration (movable_node and a NUMA hoptlugable nodes running in 32b
or and movable memory configured explicitly on the kernel command line).
The below patch is not really complete but I would rather start simple.
Maybe we do not even have to care as most 32b users will never use both
zones at the same time. I've placed a warning to learn about those.
Does this pass your testing?
---
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 262bfd26baf9..18fec18bdb60 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
return &pgdat->node_zones[ZONE_NORMAL];
}
+static struct zone *default_movable_zone_for_pfn(int nid)
+{
+ /*
+ * Please note that 32b HIGHMEM systems might have 2 movable zones
+ * actually so we have to check for both. This is rather ugly hack
+ * to enforce using Highmem on those systems but we do not have a
+ * good user API to tell into which movable zone we should online.
+ * WARN if we have a movable zone which is not highmem.
+ */
+#ifdef CONFIG_HIGHMEM
+ WARN_ON_ONCE(!zone_movable_is_highmem());
+ return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
+#else
+ return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
+#endif
+}
+
static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
unsigned long nr_pages)
{
struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
nr_pages);
- struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
+ struct zone *movable_zone = default_movable_zone_for_pfn(nid);
bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
@@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
if (online_type == MMOP_ONLINE_MOVABLE)
- return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
+ return default_movable_zone_for_pfn(nid);
return default_zone_for_pfn(nid, start_pfn, nr_pages);
}
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-12-18 14:53 ` Michal Hocko
@ 2017-12-18 17:54 ` Randy Dunlap
-1 siblings, 0 replies; 20+ messages in thread
From: Randy Dunlap @ 2017-12-18 17:54 UTC (permalink / raw)
To: Michal Hocko, Seth Forshee; +Cc: linux-mm, linux-kernel
On 12/18/2017 06:53 AM, Michal Hocko wrote:
> On Fri 01-12-17 08:23:27, Seth Forshee wrote:
>> On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
>>> On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> [...]
>>>> It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
>>>> and the problem still occurs there. It's pointing to the call to
>>>> __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
>>>> get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
>>>
>>> Hmm, this is interesting. That would mean that we have successfully
>>> mapped the destination page but its memory is still not accessible.
>>>
>>> Right now I do not see how the patch you have bisected to could make any
>>> difference because it only postponed the onlining to be independent but
>>> your config simply onlines automatically so there shouldn't be any
>>> semantic change. Maybe there is some sort of off-by-one or something.
>>>
>>> I will try to investigate some more. Do you think it would be possible
>>> to configure kdump on your system and provide me with the vmcore in some
>>> way?
>>
>> Sorry, I got busy with other stuff and this kind of fell off my radar.
>> It came to my attention again recently though.
>
> Apology on my side. This has completely fall of my radar.
>
>> I was looking through the hotplug rework changes, and I noticed that
>> 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
>> rework it doesn't look like it's possible for memory to be associated
>> with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
>> and am now no longer seeing the oopses.
>
> Thanks a lot for debugging! Do I read the above correctly that the
> current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> this zone and that leads to later blowups? Could you attach the fresh
> boot dmesg output please?
>
>> I'm sure this isn't the correct fix, but I think it does confirm that
>> the problem is that the memory should be associated with ZONE_HIGHMEM
>> but is not.
>
>
> Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> zone. The kernel cannot access that memory directly. It is essentially a
> movable zone from the hotplug API POV. We simply do not have any way to
> tell into which zone we want to online this memory range in.
> Unfortunately both zones _can_ be present. It would require an explicit
> configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> or and movable memory configured explicitly on the kernel command line).
>
> The below patch is not really complete but I would rather start simple.
> Maybe we do not even have to care as most 32b users will never use both
> zones at the same time. I've placed a warning to learn about those.
>
> Does this pass your testing?
> ---
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 262bfd26baf9..18fec18bdb60 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> return &pgdat->node_zones[ZONE_NORMAL];
> }
>
> +static struct zone *default_movable_zone_for_pfn(int nid)
> +{
> + /*
> + * Please note that 32b HIGHMEM systems might have 2 movable zones
Please spell out 32-bit. It took me a bit to realize what "32b" was.
ta.
> + * actually so we have to check for both. This is rather ugly hack
> + * to enforce using Highmem on those systems but we do not have a
> + * good user API to tell into which movable zone we should online.
> + * WARN if we have a movable zone which is not highmem.
> + */
> +#ifdef CONFIG_HIGHMEM
> + WARN_ON_ONCE(!zone_movable_is_highmem());
> + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> +#else
> + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> +#endif
> +}
> +
> static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> unsigned long nr_pages)
> {
> struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> nr_pages);
> - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
>
> @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
>
> if (online_type == MMOP_ONLINE_MOVABLE)
> - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + return default_movable_zone_for_pfn(nid);
>
> return default_zone_for_pfn(nid, start_pfn, nr_pages);
> }
>
--
~Randy
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-12-18 17:54 ` Randy Dunlap
0 siblings, 0 replies; 20+ messages in thread
From: Randy Dunlap @ 2017-12-18 17:54 UTC (permalink / raw)
To: Michal Hocko, Seth Forshee; +Cc: linux-mm, linux-kernel
On 12/18/2017 06:53 AM, Michal Hocko wrote:
> On Fri 01-12-17 08:23:27, Seth Forshee wrote:
>> On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
>>> On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> [...]
>>>> It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
>>>> and the problem still occurs there. It's pointing to the call to
>>>> __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
>>>> get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
>>>
>>> Hmm, this is interesting. That would mean that we have successfully
>>> mapped the destination page but its memory is still not accessible.
>>>
>>> Right now I do not see how the patch you have bisected to could make any
>>> difference because it only postponed the onlining to be independent but
>>> your config simply onlines automatically so there shouldn't be any
>>> semantic change. Maybe there is some sort of off-by-one or something.
>>>
>>> I will try to investigate some more. Do you think it would be possible
>>> to configure kdump on your system and provide me with the vmcore in some
>>> way?
>>
>> Sorry, I got busy with other stuff and this kind of fell off my radar.
>> It came to my attention again recently though.
>
> Apology on my side. This has completely fall of my radar.
>
>> I was looking through the hotplug rework changes, and I noticed that
>> 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
>> rework it doesn't look like it's possible for memory to be associated
>> with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
>> and am now no longer seeing the oopses.
>
> Thanks a lot for debugging! Do I read the above correctly that the
> current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> this zone and that leads to later blowups? Could you attach the fresh
> boot dmesg output please?
>
>> I'm sure this isn't the correct fix, but I think it does confirm that
>> the problem is that the memory should be associated with ZONE_HIGHMEM
>> but is not.
>
>
> Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> zone. The kernel cannot access that memory directly. It is essentially a
> movable zone from the hotplug API POV. We simply do not have any way to
> tell into which zone we want to online this memory range in.
> Unfortunately both zones _can_ be present. It would require an explicit
> configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> or and movable memory configured explicitly on the kernel command line).
>
> The below patch is not really complete but I would rather start simple.
> Maybe we do not even have to care as most 32b users will never use both
> zones at the same time. I've placed a warning to learn about those.
>
> Does this pass your testing?
> ---
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 262bfd26baf9..18fec18bdb60 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> return &pgdat->node_zones[ZONE_NORMAL];
> }
>
> +static struct zone *default_movable_zone_for_pfn(int nid)
> +{
> + /*
> + * Please note that 32b HIGHMEM systems might have 2 movable zones
Please spell out 32-bit. It took me a bit to realize what "32b" was.
ta.
> + * actually so we have to check for both. This is rather ugly hack
> + * to enforce using Highmem on those systems but we do not have a
> + * good user API to tell into which movable zone we should online.
> + * WARN if we have a movable zone which is not highmem.
> + */
> +#ifdef CONFIG_HIGHMEM
> + WARN_ON_ONCE(!zone_movable_is_highmem());
> + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> +#else
> + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> +#endif
> +}
> +
> static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> unsigned long nr_pages)
> {
> struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> nr_pages);
> - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
>
> @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
>
> if (online_type == MMOP_ONLINE_MOVABLE)
> - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + return default_movable_zone_for_pfn(nid);
>
> return default_zone_for_pfn(nid, start_pfn, nr_pages);
> }
>
--
~Randy
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-12-18 14:53 ` Michal Hocko
@ 2017-12-22 14:49 ` Michal Hocko
-1 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-12-22 14:49 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> [...]
> > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > and the problem still occurs there. It's pointing to the call to
> > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > >
> > > Hmm, this is interesting. That would mean that we have successfully
> > > mapped the destination page but its memory is still not accessible.
> > >
> > > Right now I do not see how the patch you have bisected to could make any
> > > difference because it only postponed the onlining to be independent but
> > > your config simply onlines automatically so there shouldn't be any
> > > semantic change. Maybe there is some sort of off-by-one or something.
> > >
> > > I will try to investigate some more. Do you think it would be possible
> > > to configure kdump on your system and provide me with the vmcore in some
> > > way?
> >
> > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > It came to my attention again recently though.
>
> Apology on my side. This has completely fall of my radar.
>
> > I was looking through the hotplug rework changes, and I noticed that
> > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > rework it doesn't look like it's possible for memory to be associated
> > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > and am now no longer seeing the oopses.
>
> Thanks a lot for debugging! Do I read the above correctly that the
> current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> this zone and that leads to later blowups? Could you attach the fresh
> boot dmesg output please?
>
> > I'm sure this isn't the correct fix, but I think it does confirm that
> > the problem is that the memory should be associated with ZONE_HIGHMEM
> > but is not.
>
>
> Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> zone. The kernel cannot access that memory directly. It is essentially a
> movable zone from the hotplug API POV. We simply do not have any way to
> tell into which zone we want to online this memory range in.
> Unfortunately both zones _can_ be present. It would require an explicit
> configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> or and movable memory configured explicitly on the kernel command line).
>
> The below patch is not really complete but I would rather start simple.
> Maybe we do not even have to care as most 32b users will never use both
> zones at the same time. I've placed a warning to learn about those.
>
> Does this pass your testing?
Any chances to test this?
> ---
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 262bfd26baf9..18fec18bdb60 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> return &pgdat->node_zones[ZONE_NORMAL];
> }
>
> +static struct zone *default_movable_zone_for_pfn(int nid)
> +{
> + /*
> + * Please note that 32b HIGHMEM systems might have 2 movable zones
> + * actually so we have to check for both. This is rather ugly hack
> + * to enforce using Highmem on those systems but we do not have a
> + * good user API to tell into which movable zone we should online.
> + * WARN if we have a movable zone which is not highmem.
> + */
> +#ifdef CONFIG_HIGHMEM
> + WARN_ON_ONCE(!zone_movable_is_highmem());
> + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> +#else
> + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> +#endif
> +}
> +
> static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> unsigned long nr_pages)
> {
> struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> nr_pages);
> - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
>
> @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
>
> if (online_type == MMOP_ONLINE_MOVABLE)
> - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + return default_movable_zone_for_pfn(nid);
>
> return default_zone_for_pfn(nid, start_pfn, nr_pages);
> }
> --
> Michal Hocko
> SUSE Labs
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-12-22 14:49 ` Michal Hocko
0 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-12-22 14:49 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> [...]
> > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > and the problem still occurs there. It's pointing to the call to
> > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > >
> > > Hmm, this is interesting. That would mean that we have successfully
> > > mapped the destination page but its memory is still not accessible.
> > >
> > > Right now I do not see how the patch you have bisected to could make any
> > > difference because it only postponed the onlining to be independent but
> > > your config simply onlines automatically so there shouldn't be any
> > > semantic change. Maybe there is some sort of off-by-one or something.
> > >
> > > I will try to investigate some more. Do you think it would be possible
> > > to configure kdump on your system and provide me with the vmcore in some
> > > way?
> >
> > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > It came to my attention again recently though.
>
> Apology on my side. This has completely fall of my radar.
>
> > I was looking through the hotplug rework changes, and I noticed that
> > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > rework it doesn't look like it's possible for memory to be associated
> > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > and am now no longer seeing the oopses.
>
> Thanks a lot for debugging! Do I read the above correctly that the
> current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> this zone and that leads to later blowups? Could you attach the fresh
> boot dmesg output please?
>
> > I'm sure this isn't the correct fix, but I think it does confirm that
> > the problem is that the memory should be associated with ZONE_HIGHMEM
> > but is not.
>
>
> Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> zone. The kernel cannot access that memory directly. It is essentially a
> movable zone from the hotplug API POV. We simply do not have any way to
> tell into which zone we want to online this memory range in.
> Unfortunately both zones _can_ be present. It would require an explicit
> configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> or and movable memory configured explicitly on the kernel command line).
>
> The below patch is not really complete but I would rather start simple.
> Maybe we do not even have to care as most 32b users will never use both
> zones at the same time. I've placed a warning to learn about those.
>
> Does this pass your testing?
Any chances to test this?
> ---
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 262bfd26baf9..18fec18bdb60 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> return &pgdat->node_zones[ZONE_NORMAL];
> }
>
> +static struct zone *default_movable_zone_for_pfn(int nid)
> +{
> + /*
> + * Please note that 32b HIGHMEM systems might have 2 movable zones
> + * actually so we have to check for both. This is rather ugly hack
> + * to enforce using Highmem on those systems but we do not have a
> + * good user API to tell into which movable zone we should online.
> + * WARN if we have a movable zone which is not highmem.
> + */
> +#ifdef CONFIG_HIGHMEM
> + WARN_ON_ONCE(!zone_movable_is_highmem());
> + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> +#else
> + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> +#endif
> +}
> +
> static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> unsigned long nr_pages)
> {
> struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> nr_pages);
> - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
>
> @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
>
> if (online_type == MMOP_ONLINE_MOVABLE)
> - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + return default_movable_zone_for_pfn(nid);
>
> return default_zone_for_pfn(nid, start_pfn, nr_pages);
> }
> --
> Michal Hocko
> SUSE Labs
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-12-22 14:49 ` Michal Hocko
@ 2017-12-22 16:12 ` Seth Forshee
-1 siblings, 0 replies; 20+ messages in thread
From: Seth Forshee @ 2017-12-22 16:12 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
On Fri, Dec 22, 2017 at 03:49:25PM +0100, Michal Hocko wrote:
> On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> > On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> > [...]
> > > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > > and the problem still occurs there. It's pointing to the call to
> > > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > > >
> > > > Hmm, this is interesting. That would mean that we have successfully
> > > > mapped the destination page but its memory is still not accessible.
> > > >
> > > > Right now I do not see how the patch you have bisected to could make any
> > > > difference because it only postponed the onlining to be independent but
> > > > your config simply onlines automatically so there shouldn't be any
> > > > semantic change. Maybe there is some sort of off-by-one or something.
> > > >
> > > > I will try to investigate some more. Do you think it would be possible
> > > > to configure kdump on your system and provide me with the vmcore in some
> > > > way?
> > >
> > > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > > It came to my attention again recently though.
> >
> > Apology on my side. This has completely fall of my radar.
> >
> > > I was looking through the hotplug rework changes, and I noticed that
> > > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > > rework it doesn't look like it's possible for memory to be associated
> > > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > > and am now no longer seeing the oopses.
> >
> > Thanks a lot for debugging! Do I read the above correctly that the
> > current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> > this zone and that leads to later blowups? Could you attach the fresh
> > boot dmesg output please?
> >
> > > I'm sure this isn't the correct fix, but I think it does confirm that
> > > the problem is that the memory should be associated with ZONE_HIGHMEM
> > > but is not.
> >
> >
> > Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> > zone. The kernel cannot access that memory directly. It is essentially a
> > movable zone from the hotplug API POV. We simply do not have any way to
> > tell into which zone we want to online this memory range in.
> > Unfortunately both zones _can_ be present. It would require an explicit
> > configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> > or and movable memory configured explicitly on the kernel command line).
> >
> > The below patch is not really complete but I would rather start simple.
> > Maybe we do not even have to care as most 32b users will never use both
> > zones at the same time. I've placed a warning to learn about those.
> >
> > Does this pass your testing?
>
> Any chances to test this?
Yes, I should get to testing it soon. I'm working through a backlog of
things I need to get done and this just hasn't quite made it to the top.
> > ---
> > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> > index 262bfd26baf9..18fec18bdb60 100644
> > --- a/mm/memory_hotplug.c
> > +++ b/mm/memory_hotplug.c
> > @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> > return &pgdat->node_zones[ZONE_NORMAL];
> > }
> >
> > +static struct zone *default_movable_zone_for_pfn(int nid)
> > +{
> > + /*
> > + * Please note that 32b HIGHMEM systems might have 2 movable zones
> > + * actually so we have to check for both. This is rather ugly hack
> > + * to enforce using Highmem on those systems but we do not have a
> > + * good user API to tell into which movable zone we should online.
> > + * WARN if we have a movable zone which is not highmem.
> > + */
> > +#ifdef CONFIG_HIGHMEM
> > + WARN_ON_ONCE(!zone_movable_is_highmem());
> > + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> > +#else
> > + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > +#endif
> > +}
> > +
> > static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> > unsigned long nr_pages)
> > {
> > struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> > nr_pages);
> > - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> > bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> > bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
> >
> > @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> > return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
> >
> > if (online_type == MMOP_ONLINE_MOVABLE)
> > - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > + return default_movable_zone_for_pfn(nid);
> >
> > return default_zone_for_pfn(nid, start_pfn, nr_pages);
> > }
> > --
> > Michal Hocko
> > SUSE Labs
>
> --
> Michal Hocko
> SUSE Labs
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-12-22 16:12 ` Seth Forshee
0 siblings, 0 replies; 20+ messages in thread
From: Seth Forshee @ 2017-12-22 16:12 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
On Fri, Dec 22, 2017 at 03:49:25PM +0100, Michal Hocko wrote:
> On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> > On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> > [...]
> > > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > > and the problem still occurs there. It's pointing to the call to
> > > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > > >
> > > > Hmm, this is interesting. That would mean that we have successfully
> > > > mapped the destination page but its memory is still not accessible.
> > > >
> > > > Right now I do not see how the patch you have bisected to could make any
> > > > difference because it only postponed the onlining to be independent but
> > > > your config simply onlines automatically so there shouldn't be any
> > > > semantic change. Maybe there is some sort of off-by-one or something.
> > > >
> > > > I will try to investigate some more. Do you think it would be possible
> > > > to configure kdump on your system and provide me with the vmcore in some
> > > > way?
> > >
> > > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > > It came to my attention again recently though.
> >
> > Apology on my side. This has completely fall of my radar.
> >
> > > I was looking through the hotplug rework changes, and I noticed that
> > > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > > rework it doesn't look like it's possible for memory to be associated
> > > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > > and am now no longer seeing the oopses.
> >
> > Thanks a lot for debugging! Do I read the above correctly that the
> > current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> > this zone and that leads to later blowups? Could you attach the fresh
> > boot dmesg output please?
> >
> > > I'm sure this isn't the correct fix, but I think it does confirm that
> > > the problem is that the memory should be associated with ZONE_HIGHMEM
> > > but is not.
> >
> >
> > Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> > zone. The kernel cannot access that memory directly. It is essentially a
> > movable zone from the hotplug API POV. We simply do not have any way to
> > tell into which zone we want to online this memory range in.
> > Unfortunately both zones _can_ be present. It would require an explicit
> > configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> > or and movable memory configured explicitly on the kernel command line).
> >
> > The below patch is not really complete but I would rather start simple.
> > Maybe we do not even have to care as most 32b users will never use both
> > zones at the same time. I've placed a warning to learn about those.
> >
> > Does this pass your testing?
>
> Any chances to test this?
Yes, I should get to testing it soon. I'm working through a backlog of
things I need to get done and this just hasn't quite made it to the top.
> > ---
> > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> > index 262bfd26baf9..18fec18bdb60 100644
> > --- a/mm/memory_hotplug.c
> > +++ b/mm/memory_hotplug.c
> > @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> > return &pgdat->node_zones[ZONE_NORMAL];
> > }
> >
> > +static struct zone *default_movable_zone_for_pfn(int nid)
> > +{
> > + /*
> > + * Please note that 32b HIGHMEM systems might have 2 movable zones
> > + * actually so we have to check for both. This is rather ugly hack
> > + * to enforce using Highmem on those systems but we do not have a
> > + * good user API to tell into which movable zone we should online.
> > + * WARN if we have a movable zone which is not highmem.
> > + */
> > +#ifdef CONFIG_HIGHMEM
> > + WARN_ON_ONCE(!zone_movable_is_highmem());
> > + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> > +#else
> > + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > +#endif
> > +}
> > +
> > static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> > unsigned long nr_pages)
> > {
> > struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> > nr_pages);
> > - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> > bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> > bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
> >
> > @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> > return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
> >
> > if (online_type == MMOP_ONLINE_MOVABLE)
> > - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > + return default_movable_zone_for_pfn(nid);
> >
> > return default_zone_for_pfn(nid, start_pfn, nr_pages);
> > }
> > --
> > Michal Hocko
> > SUSE Labs
>
> --
> Michal Hocko
> SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-12-22 16:12 ` Seth Forshee
(?)
@ 2017-12-22 18:45 ` Seth Forshee
2017-12-29 13:05 ` Michal Hocko
-1 siblings, 1 reply; 20+ messages in thread
From: Seth Forshee @ 2017-12-22 18:45 UTC (permalink / raw)
To: Michal Hocko; +Cc: linux-mm, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 5866 bytes --]
On Fri, Dec 22, 2017 at 10:12:40AM -0600, Seth Forshee wrote:
> On Fri, Dec 22, 2017 at 03:49:25PM +0100, Michal Hocko wrote:
> > On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> > > On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > > > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> > > [...]
> > > > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > > > and the problem still occurs there. It's pointing to the call to
> > > > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > > > >
> > > > > Hmm, this is interesting. That would mean that we have successfully
> > > > > mapped the destination page but its memory is still not accessible.
> > > > >
> > > > > Right now I do not see how the patch you have bisected to could make any
> > > > > difference because it only postponed the onlining to be independent but
> > > > > your config simply onlines automatically so there shouldn't be any
> > > > > semantic change. Maybe there is some sort of off-by-one or something.
> > > > >
> > > > > I will try to investigate some more. Do you think it would be possible
> > > > > to configure kdump on your system and provide me with the vmcore in some
> > > > > way?
> > > >
> > > > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > > > It came to my attention again recently though.
> > >
> > > Apology on my side. This has completely fall of my radar.
> > >
> > > > I was looking through the hotplug rework changes, and I noticed that
> > > > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > > > rework it doesn't look like it's possible for memory to be associated
> > > > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > > > and am now no longer seeing the oopses.
> > >
> > > Thanks a lot for debugging! Do I read the above correctly that the
> > > current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> > > this zone and that leads to later blowups? Could you attach the fresh
> > > boot dmesg output please?
> > >
> > > > I'm sure this isn't the correct fix, but I think it does confirm that
> > > > the problem is that the memory should be associated with ZONE_HIGHMEM
> > > > but is not.
> > >
> > >
> > > Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> > > zone. The kernel cannot access that memory directly. It is essentially a
> > > movable zone from the hotplug API POV. We simply do not have any way to
> > > tell into which zone we want to online this memory range in.
> > > Unfortunately both zones _can_ be present. It would require an explicit
> > > configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> > > or and movable memory configured explicitly on the kernel command line).
> > >
> > > The below patch is not really complete but I would rather start simple.
> > > Maybe we do not even have to care as most 32b users will never use both
> > > zones at the same time. I've placed a warning to learn about those.
> > >
> > > Does this pass your testing?
> >
> > Any chances to test this?
>
> Yes, I should get to testing it soon. I'm working through a backlog of
> things I need to get done and this just hasn't quite made it to the top.
I started by testing vanilla 4.15-rc4 with a vm that has several memory
slots already populated at boot. With that I no longer get an oops,
however while /sys/devices/system/memory/*/online is 1 it looks like the
memory isn't being used. With your patch the behavior is the same. I'm
attaching dmesg from both kernels.
Thanks,
Seth
>
> > > ---
> > > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> > > index 262bfd26baf9..18fec18bdb60 100644
> > > --- a/mm/memory_hotplug.c
> > > +++ b/mm/memory_hotplug.c
> > > @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> > > return &pgdat->node_zones[ZONE_NORMAL];
> > > }
> > >
> > > +static struct zone *default_movable_zone_for_pfn(int nid)
> > > +{
> > > + /*
> > > + * Please note that 32b HIGHMEM systems might have 2 movable zones
> > > + * actually so we have to check for both. This is rather ugly hack
> > > + * to enforce using Highmem on those systems but we do not have a
> > > + * good user API to tell into which movable zone we should online.
> > > + * WARN if we have a movable zone which is not highmem.
> > > + */
> > > +#ifdef CONFIG_HIGHMEM
> > > + WARN_ON_ONCE(!zone_movable_is_highmem());
> > > + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> > > +#else
> > > + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > > +#endif
> > > +}
> > > +
> > > static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> > > unsigned long nr_pages)
> > > {
> > > struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> > > nr_pages);
> > > - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > > + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> > > bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> > > bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
> > >
> > > @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> > > return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
> > >
> > > if (online_type == MMOP_ONLINE_MOVABLE)
> > > - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> > > + return default_movable_zone_for_pfn(nid);
> > >
> > > return default_zone_for_pfn(nid, start_pfn, nr_pages);
> > > }
> > > --
> > > Michal Hocko
> > > SUSE Labs
> >
> > --
> > Michal Hocko
> > SUSE Labs
[-- Attachment #2: dmesg-4.15-rc4.txt --]
[-- Type: text/plain, Size: 34062 bytes --]
[ 0.000000] Linux version 4.15.0-041500rc4-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201712172330 SMP Mon Dec 18 04:44:01 UTC 2017
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ffde max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f6a90-0x000f6a9f] mapped at [(ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x073fffff]
[ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.000000] BRK [0x06eee000, 0x06eeefff] PGTABLE
[ 0.000000] BRK [0x06eef000, 0x06eeffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1bf44000-0x1ed17fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F68B0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000001FFE1B1E 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x000000001FFE197A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000001FFE0040 00193A (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x000000001FFE0000 000040
[ 0.000000] ACPI: APIC 0x000000001FFE1A6E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x000000001FFE1AE6 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffde000
[ 0.000000] low ram: 0 - 1ffde000
[ 0.000000] kvm-clock: cpu 0, msr 0:1ffdc001, primary cpu clock
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 3886829473 cycles
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffddfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffddfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[ 0.000000] On node 0 totalpages: 130940
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1240 pages used for memmap
[ 0.000000] Normal zone: 126942 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 23 pages/cpu @(ptrval) s65420 r0 d28788 u94208
[ 0.000000] pcpu-alloc: s65420 r0 d28788 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1fac5640
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129660
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-041500rc4-generic root=UUID=e8de8903-ce33-4ba7-89bd-03a419bda665 ro console=ttyAMA0 console=ttyS0
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 455832K/523760K available (8735K kernel code, 893K rwdata, 3400K rodata, 1040K init, 848K bss, 67928K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff0b000 - 0xfffff000 ( 976 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xe07de000 - 0xffbfe000 ( 500 MB)
lowmem : 0xc0000000 - 0xdffde000 ( 511 MB)
.init : 0xc6cd3000 - 0xc6dd7000 (1040 kB)
.data : 0xc6887c88 - 0xc6cbf480 (4317 kB)
.text : 0xc6000000 - 0xc6887c88 (8735 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 37617 entries in 74 pages
[ 0.004000] Hierarchical RCU implementation.
[ 0.004000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.004000] Tasks RCU enabled.
[ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.004000] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[ 0.004000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] allocated 524288 bytes of page_ext
[ 0.004000] ACPI: Core revision 20170831
[ 0.004000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.004000] hpet clockevent registered
[ 0.004003] APIC: Switch to symmetric I/O mode setup
[ 0.004444] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.005330] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.005688] tsc: Detected 2993.068 MHz processor
[ 0.005952] Calibrating delay loop (skipped) preset value.. 5986.13 BogoMIPS (lpj=11972272)
[ 0.005952] pid_max: default: 32768 minimum: 301
[ 0.005952] Security Framework initialized
[ 0.005952] Yama: becoming mindful.
[ 0.005952] AppArmor: AppArmor initialized
[ 0.005952] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.005952] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008166] CPU: Physical Processor ID: 0
[ 0.008416] mce: CPU supports 10 MCE banks
[ 0.008676] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.008983] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.014630] Freeing SMP alternatives memory: 32K
[ 0.016000] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[ 0.016000] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.016000] Hierarchical SRCU implementation.
[ 0.016000] NMI watchdog: Perf event create on CPU 0 failed with -2
[ 0.016000] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.016000] smp: Bringing up secondary CPUs ...
[ 0.016000] smp: Brought up 1 node, 1 CPU
[ 0.016000] smpboot: Max logical packages: 1
[ 0.016000] smpboot: Total of 1 processors activated (5986.13 BogoMIPS)
[ 0.016000] devtmpfs: initialized
[ 0.016133] evm: security.selinux
[ 0.016394] evm: security.SMACK64
[ 0.016603] evm: security.SMACK64EXEC
[ 0.016815] evm: security.SMACK64TRANSMUTE
[ 0.017052] evm: security.SMACK64MMAP
[ 0.017264] evm: security.apparmor
[ 0.017462] evm: security.ima
[ 0.017636] evm: security.capability
[ 0.017932] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.018497] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.018870] pinctrl core: initialized pinctrl subsystem
[ 0.019249] RTC time: 18:39:18, date: 12/22/17
[ 0.019559] NET: Registered protocol family 16
[ 0.020031] audit: initializing netlink subsys (disabled)
[ 0.020447] EISA bus registered
[ 0.020649] cpuidle: using governor ladder
[ 0.020885] cpuidle: using governor menu
[ 0.021163] ACPI: bus type PCI registered
[ 0.021399] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.021987] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.022399] PCI: PCI BIOS revision 2.10 entry at 0xfd501, last bus=0
[ 0.022762] PCI: Using configuration type 1 for base access
[ 0.023812] audit: type=2000 audit(1513967958.480:1): state=initialized audit_enabled=0 res=1
[ 0.024046] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.024566] ACPI: Added _OSI(Module Device)
[ 0.024840] ACPI: Added _OSI(Processor Device)
[ 0.025096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.025365] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.026639] ACPI: Interpreter enabled
[ 0.026873] ACPI: (supports S0 S3 S4 S5)
[ 0.027100] ACPI: Using IOAPIC for interrupt routing
[ 0.027394] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.028103] ACPI: Enabled 3 GPEs in block 00 to 0F
[ 0.030217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.030584] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.030979] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.031359] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.032198] acpiphp: Slot [3] registered
[ 0.032442] acpiphp: Slot [4] registered
[ 0.032683] acpiphp: Slot [5] registered
[ 0.032922] acpiphp: Slot [6] registered
[ 0.033160] acpiphp: Slot [7] registered
[ 0.033400] acpiphp: Slot [8] registered
[ 0.033639] acpiphp: Slot [9] registered
[ 0.033879] acpiphp: Slot [10] registered
[ 0.034124] acpiphp: Slot [11] registered
[ 0.034368] acpiphp: Slot [12] registered
[ 0.034611] acpiphp: Slot [13] registered
[ 0.034854] acpiphp: Slot [14] registered
[ 0.035098] acpiphp: Slot [15] registered
[ 0.035341] acpiphp: Slot [16] registered
[ 0.035584] acpiphp: Slot [17] registered
[ 0.036012] acpiphp: Slot [18] registered
[ 0.036263] acpiphp: Slot [19] registered
[ 0.036683] acpiphp: Slot [20] registered
[ 0.036946] acpiphp: Slot [21] registered
[ 0.037188] acpiphp: Slot [22] registered
[ 0.037429] acpiphp: Slot [23] registered
[ 0.037670] acpiphp: Slot [24] registered
[ 0.037911] acpiphp: Slot [25] registered
[ 0.038152] acpiphp: Slot [26] registered
[ 0.038394] acpiphp: Slot [27] registered
[ 0.038635] acpiphp: Slot [28] registered
[ 0.038876] acpiphp: Slot [29] registered
[ 0.039124] acpiphp: Slot [30] registered
[ 0.039367] acpiphp: Slot [31] registered
[ 0.039605] PCI host bridge to bus 0000:00
[ 0.039842] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.040002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.040390] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.040836] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[ 0.041288] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.041642] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.041841] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.042095] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.044709] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f]
[ 0.045794] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.046326] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.047506] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.048002] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.048472] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.048658] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.049089] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.049638] pci 0000:00:02.0: [1b36:0100] type 00 class 0x030000
[ 0.052003] pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf7ffffff]
[ 0.054637] pci 0000:00:02.0: reg 0x14: [mem 0xf8000000-0xfbffffff]
[ 0.057775] pci 0000:00:02.0: reg 0x18: [mem 0xfc050000-0xfc051fff]
[ 0.061652] pci 0000:00:02.0: reg 0x1c: [io 0xc040-0xc05f]
[ 0.069537] pci 0000:00:02.0: reg 0x30: [mem 0xfc040000-0xfc04ffff pref]
[ 0.069688] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.072003] pci 0000:00:03.0: reg 0x10: [io 0xc060-0xc07f]
[ 0.073800] pci 0000:00:03.0: reg 0x14: [mem 0xfc052000-0xfc052fff]
[ 0.081186] pci 0000:00:03.0: reg 0x20: [mem 0xfebf8000-0xfebfbfff 64bit pref]
[ 0.082353] pci 0000:00:03.0: reg 0x30: [mem 0xfc000000-0xfc03ffff pref]
[ 0.082632] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.084827] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc03f]
[ 0.086377] pci 0000:00:04.0: reg 0x14: [mem 0xfc053000-0xfc053fff]
[ 0.091220] pci 0000:00:04.0: reg 0x20: [mem 0xfebfc000-0xfebfffff 64bit pref]
[ 0.093849] pci_bus 0000:00: on NUMA node 0
[ 0.094119] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.094584] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.096060] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.096484] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.096876] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.105104] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.105472] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.105986] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.106341] vgaarb: loaded
[ 0.106624] SCSI subsystem initialized
[ 0.106866] libata version 3.00 loaded.
[ 0.106876] ACPI: bus type USB registered
[ 0.107121] usbcore: registered new interface driver usbfs
[ 0.107440] usbcore: registered new interface driver hub
[ 0.107766] usbcore: registered new device driver usb
[ 0.108038] EDAC MC: Ver: 3.0.0
[ 0.108360] PCI: Using ACPI for IRQ routing
[ 0.108626] PCI: pci_cache_line_size set to 64 bytes
[ 0.108689] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.108690] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[ 0.108750] NetLabel: Initializing
[ 0.108956] NetLabel: domain hash size = 128
[ 0.109348] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.109707] NetLabel: unlabeled traffic allowed by default
[ 0.110132] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.110548] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.110831] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.113043] clocksource: Switched to clocksource kvm-clock
[ 0.119947] VFS: Disk quotas dquot_6.6.0
[ 0.120228] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.120706] AppArmor: AppArmor Filesystem Enabled
[ 0.121025] pnp: PnP ACPI init
[ 0.121239] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.121260] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.121274] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.121280] pnp 00:03: [dma 2]
[ 0.121287] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.121319] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.121344] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.121510] pnp: PnP ACPI: found 6 devices
[ 0.121767] PnPBIOS: Disabled
[ 0.157088] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.157648] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.157649] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.157650] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.157651] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[ 0.157685] NET: Registered protocol family 2
[ 0.158095] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.158543] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.158947] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.159347] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.159709] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.160136] NET: Registered protocol family 1
[ 0.160416] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.160764] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.161132] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.161519] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.162009] PCI: CLS 0 bytes, default 64
[ 0.162035] Unpacking initramfs...
[ 0.746635] Freeing initrd memory: 46928K
[ 0.747071] Scanning for low memory corruption every 60 seconds
[ 0.747751] Initialise system trusted keyrings
[ 0.748056] Key type blacklist registered
[ 0.748331] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.749421] zbud: loaded
[ 0.749752] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.750202] fuse init (API version 7.26)
[ 0.751032] Key type asymmetric registered
[ 0.751306] Asymmetric key parser 'x509' registered
[ 0.751613] bounce: pool size: 64 pages
[ 0.751859] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.752338] io scheduler noop registered
[ 0.752586] io scheduler deadline registered
[ 0.752876] io scheduler cfq registered (default)
[ 0.753247] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.753619] vesafb: scrolling: redraw
[ 0.753845] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.754195] vesafb: framebuffer at 0xf4000000, mapped to 0xafd94fcf, using 1216k, total 1216k
[ 0.755675] Console: switching to colour frame buffer device 80x30
[ 0.756731] fb0: VESA VGA frame buffer device
[ 0.757012] intel_idle: does not run on family 6 model 6
[ 0.757051] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.757513] ACPI: Power Button [PWRF]
[ 0.757820] isapnp: Scanning for PnP cards...
[ 1.070402] isapnp: No Plug & Play device found
[ 1.083687] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.097439] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.098301] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.120455] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.121496] Linux agpgart interface v0.103
[ 1.122528] loop: module loaded
[ 1.122825] ata_piix 0000:00:01.1: version 2.13
[ 1.123399] scsi host0: ata_piix
[ 1.123653] scsi host1: ata_piix
[ 1.123887] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc080 irq 14
[ 1.124283] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc088 irq 15
[ 1.125003] libphy: Fixed MDIO Bus: probed
[ 1.125251] tun: Universal TUN/TAP device driver, 1.6
[ 1.125564] PPP generic driver version 2.4.2
[ 1.125839] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.126220] ehci-pci: EHCI PCI platform driver
[ 1.126483] ehci-platform: EHCI generic platform driver
[ 1.126790] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.127191] ohci-pci: OHCI PCI platform driver
[ 1.127453] ohci-platform: OHCI generic platform driver
[ 1.127757] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.128164] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.129028] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.129320] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.129788] mousedev: PS/2 mouse device common for all mice
[ 1.130245] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.130892] rtc_cmos 00:00: RTC can wake from S4
[ 1.131277] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.131690] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 1.132161] i2c /dev entries driver
[ 1.132407] device-mapper: uevent: version 1.0.3
[ 1.132707] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.133206] platform eisa.0: Probing EISA bus 0
[ 1.133471] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.133860] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.134231] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.134600] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.134977] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.135348] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.135719] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.136099] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.136472] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.136842] platform eisa.0: EISA: Detected 0 cards
[ 1.137126] cpufreq_nforce2: No nForce2 chipset
[ 1.137392] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.137861] NET: Registered protocol family 10
[ 1.140428] Segment Routing with IPv6
[ 1.140686] NET: Registered protocol family 17
[ 1.140966] Key type dns_resolver registered
[ 1.141314] Using IPI No-Shortcut mode
[ 1.141550] sched_clock: Marking stable (1140004764, 0)->(1299958250, -159953486)
[ 1.142043] registered taskstats version 1
[ 1.142291] Loading compiled-in X.509 certificates
[ 1.145589] Loaded X.509 cert 'Build time autogenerated kernel key: 09bb3ba9dbb9e00f8aef7277c4602a1ee9405c5d'
[ 1.146209] zswap: loaded using pool lzo/zbud
[ 1.148361] Key type big_key registered
[ 1.148606] Key type trusted registered
[ 1.149715] Key type encrypted registered
[ 1.149968] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.150349] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.150754] evm: HMAC attrs: 0x1
[ 1.151063] Magic number: 13:732:696
[ 1.151344] rtc_cmos 00:00: setting system clock to 2017-12-22 18:39:19 UTC (1513967959)
[ 1.151844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.152211] EDD information not available.
[ 1.288500] ata2.01: NODEV after polling detection
[ 1.288799] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.290140] ata2.00: configured for MWDMA2
[ 1.291284] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.304567] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.305620] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.306889] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.306955] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.309727] Freeing unused kernel memory: 1040K
[ 1.310503] Write protecting the kernel text: 8736k
[ 1.311384] Write protecting the kernel read-only data: 3424k
[ 1.312310] NX-protecting the kernel data: 5600k
[ 1.313178] ------------[ cut here ]------------
[ 1.313907] x86/mm: Found insecure W+X mapping at address 4f556ded/0xc00a0000
[ 1.314933] WARNING: CPU: 0 PID: 1 at /home/kernel/COD/linux/arch/x86/mm/dump_pagetables.c:237 note_page+0x670/0x860
[ 1.315538] Modules linked in:
[ 1.315720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-041500rc4-generic #201712172330
[ 1.316206] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1.316717] EIP: note_page+0x670/0x860
[ 1.316935] EFLAGS: 00010292 CPU: 0
[ 1.317138] EAX: 00000041 EBX: df4fbf48 ECX: 000001ab EDX: 00000000
[ 1.317499] ESI: 80000000 EDI: 00000000 EBP: df4fbf14 ESP: df4fbee8
[ 1.317860] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 1.318325] CR0: 80050033 CR2: 01d5d060 CR3: 06de2000 CR4: 000006f0
[ 1.318688] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 1.319056] DR6: fffe0ff0 DR7: 00000400
[ 1.319281] Call Trace:
[ 1.319429] ptdump_walk_pgd_level_core+0x1fc/0x2e0
[ 1.319713] ptdump_walk_pgd_level_checkwx+0x16/0x20
[ 1.320001] mark_rodata_ro+0xf5/0x117
[ 1.320222] ? rest_init+0xa0/0xa0
[ 1.320422] kernel_init+0x2e/0xee
[ 1.320623] ret_from_fork+0x19/0x24
[ 1.320832] Code: c6 e9 0c fb ff ff f7 c6 00 10 00 00 74 8c 68 44 a6 ac c6 e9 16 fe ff ff 52 52 68 e4 a6 ac c6 c6 05 a6 40 c9 c6 01 e8 70 72 00 00 <0f> ff 8b 53 0c 83 c4 0c e9 38 fa ff ff 50 6a 08 52 6a 08 68 f4
[ 1.321915] ---[ end trace 0db94fa0ca4ef8ba ]---
[ 1.322245] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
[ 1.391416] Floppy drive(s): fd0 is 2.88M AMI BIOS
[ 1.408525] FDC 0 is a S82078B
[ 1.417328] vda: vda1
[ 1.424360] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4
[ 1.424973] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[ 1.464747] virtio_net virtio0 ens3: renamed from eth0
[ 1.494921] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.495290] [drm] Device Version 0.0
[ 1.495502] [drm] Compression level 0 log level 0
[ 1.495772] [drm] 12286 io pages at offset 0x1000000
[ 1.496086] [drm] 16777216 byte draw area at offset 0x0
[ 1.496410] [drm] RAM header offset: 0x3ffe000
[ 1.496687] [TTM] Zone kernel: Available graphics memory: 251916 kiB
[ 1.497065] [TTM] Initializing pool allocator
[ 1.497321] [TTM] Initializing DMA pool allocator
[ 1.497599] [drm] qxl: 16M of VRAM memory size
[ 1.497878] [drm] qxl: 63M of IO pages memory ready (VRAM domain)
[ 1.498369] [drm] qxl: 64M of Surface memory size
[ 1.500820] [drm] main mem slot 1 [f4000000,3ffe000]
[ 1.501143] [drm] surface mem slot 2 [f8000000,4000000]
[ 1.501612] [drm] fb mappable at 0xF4000000, size 3145728
[ 1.501935] [drm] fb: depth 24, pitch 4096, width 1024, height 768
[ 1.502296] checking generic (f4000000 130000) vs hw (f4000000 1000000)
[ 1.502297] fb: switching to qxldrmfb from VESA VGA
[ 1.502594] Console: switching to colour dummy device 80x25
[ 1.503244] fbcon: qxldrmfb (fb0) is primary device
[ 1.504917] Console: switching to colour frame buffer device 128x48
[ 1.508479] qxl 0000:00:02.0: fb0: qxldrmfb frame buffer device
[ 1.509224] [drm] Initialized qxl 0.1.0 20120117 for 0000:00:02.0 on minor 0
[ 1.628008] raid6: mmxx1 gen() 6651 MB/s
[ 1.696012] raid6: mmxx2 gen() 6905 MB/s
[ 1.764010] raid6: sse1x1 gen() 5701 MB/s
[ 1.832005] raid6: sse1x2 gen() 6837 MB/s
[ 1.900008] raid6: sse2x1 gen() 11432 MB/s
[ 1.968013] raid6: sse2x1 xor() 8253 MB/s
[ 2.036006] raid6: sse2x2 gen() 13663 MB/s
[ 2.104027] raid6: sse2x2 xor() 9079 MB/s
[ 2.104318] raid6: using algorithm sse2x2 gen() 13663 MB/s
[ 2.104649] raid6: .... xor() 9079 MB/s, rmw enabled
[ 2.104938] raid6: using intx1 recovery algorithm
[ 2.105274] tsc: Refined TSC clocksource calibration: 2993.001 MHz
[ 2.105636] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2471837ec, max_idle_ns: 440795222822 ns
[ 2.109716] xor: measuring software checksum speed
[ 2.148035] pIII_sse : 20406.000 MB/sec
[ 2.188006] prefetch64-sse: 22836.000 MB/sec
[ 2.188303] xor: using function: prefetch64-sse (22836.000 MB/sec)
[ 2.191606] async_tx: api initialized (async)
[ 2.253465] Btrfs loaded, crc32c=crc32c-generic
[ 2.360127] print_req_error: I/O error, dev fd0, sector 0
[ 2.361082] floppy: error 10 while reading block 0
[ 2.390703] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.520212] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.525933] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 2.527248] systemd[1]: Detected virtualization kvm.
[ 2.527587] systemd[1]: Detected architecture x86.
[ 2.529778] systemd[1]: Set hostname to <mem-hotplug>.
[ 2.614697] systemd[1]: Created slice System Slice.
[ 2.615864] systemd[1]: Mounting Kernel Debug File System...
[ 2.616585] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.617480] systemd[1]: Listening on udev Control Socket.
[ 2.618247] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.619619] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.660281] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 2.697275] Loading iSCSI transport class v2.0-870.
[ 2.738416] Adding 581564k swap on /swapfile. Priority:-2 extents:3 across:597948k FS
[ 2.745390] iscsi: registered transport (tcp)
[ 2.761676] systemd-journald[338]: Received request to flush runtime journal from PID 1
[ 2.832630] iscsi: registered transport (iser)
[ 2.991268] audit: type=1400 audit(1513967961.336:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=432 comm="apparmor_parser"
[ 2.991270] audit: type=1400 audit(1513967961.336:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=432 comm="apparmor_parser"
[ 2.991271] audit: type=1400 audit(1513967961.336:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=432 comm="apparmor_parser"
[ 2.991272] audit: type=1400 audit(1513967961.336:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=432 comm="apparmor_parser"
[ 2.996078] audit: type=1400 audit(1513967961.344:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=433 comm="apparmor_parser"
[ 2.996080] audit: type=1400 audit(1513967961.344:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=433 comm="apparmor_parser"
[ 2.996081] audit: type=1400 audit(1513967961.344:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=433 comm="apparmor_parser"
[ 2.996082] audit: type=1400 audit(1513967961.344:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=433 comm="apparmor_parser"
[ 2.997305] audit: type=1400 audit(1513967961.344:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=434 comm="apparmor_parser"
[ 3.079661] new mount options do not match the existing superblock, will be ignored
[ 3.267547] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 3.290966] parport_pc 00:04: reported by Plug and Play ACPI
[ 3.291042] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 3.750234] ppdev: user-space parallel port driver
[-- Attachment #3: dmesg-4.15-rc4+patch.txt --]
[-- Type: text/plain, Size: 36377 bytes --]
[ 0.000000] Linux version 4.15.0-rc4+ (sforshee@ubuntu-hedt) (gcc version 7.2.1 20171205 (Ubuntu 7.2.0-17ubuntu1)) #2 SMP Fri Dec 22 11:38:26 CST 2017
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ffde max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f6a90-0x000f6a9f] mapped at [(ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x053fffff]
[ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[ 0.000000] BRK [0x04ed7000, 0x04ed7fff] PGTABLE
[ 0.000000] BRK [0x04ed8000, 0x04ed8fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1bf33000-0x1ed09fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F68B0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000001FFE1B1E 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x000000001FFE197A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000001FFE0040 00193A (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x000000001FFE0000 000040
[ 0.000000] ACPI: APIC 0x000000001FFE1A6E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x000000001FFE1AE6 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffde000
[ 0.000000] low ram: 0 - 1ffde000
[ 0.000000] kvm-clock: cpu 0, msr 0:1ffdc001, primary cpu clock
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10022658731 cycles
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffddfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffddfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[ 0.000000] On node 0 totalpages: 130940
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1240 pages used for memmap
[ 0.000000] Normal zone: 126942 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 23 pages/cpu @(ptrval) s65420 r0 d28788 u94208
[ 0.000000] pcpu-alloc: s65420 r0 d28788 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1fac5640
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129660
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc4+ root=UUID=e8de8903-ce33-4ba7-89bd-03a419bda665 ro console=ttyAMA0 console=ttyS0
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 455912K/523760K available (8732K kernel code, 893K rwdata, 3372K rodata, 1044K init, 848K bss, 67848K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff0b000 - 0xfffff000 ( 976 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xe07de000 - 0xffbfe000 ( 500 MB)
lowmem : 0xc0000000 - 0xdffde000 ( 511 MB)
.init : 0xc4ccb000 - 0xc4dd0000 (1044 kB)
.data : 0xc4887008 - 0xc4cb7480 (4289 kB)
.text : 0xc4000000 - 0xc4887008 (8732 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 37534 entries in 74 pages
[ 0.004000] Hierarchical RCU implementation.
[ 0.004000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.004000] Tasks RCU enabled.
[ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.004000] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16
[ 0.004000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [ttyS0] enabled
[ 0.004000] allocated 524288 bytes of page_ext
[ 0.004000] ACPI: Core revision 20170831
[ 0.004000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.004000] hpet clockevent registered
[ 0.004005] APIC: Switch to symmetric I/O mode setup
[ 0.004394] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.005378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.005833] tsc: Detected 2993.068 MHz processor
[ 0.006169] Calibrating delay loop (skipped) preset value.. 5986.13 BogoMIPS (lpj=11972272)
[ 0.006169] pid_max: default: 32768 minimum: 301
[ 0.006169] Security Framework initialized
[ 0.006169] Yama: becoming mindful.
[ 0.006169] AppArmor: AppArmor initialized
[ 0.008028] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008510] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009180] CPU: Physical Processor ID: 0
[ 0.009492] mce: CPU supports 10 MCE banks
[ 0.009816] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.010204] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.016325] Freeing SMP alternatives memory: 32K
[ 0.020000] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[ 0.020000] Performance Events: PMU not available due to virtualization, using software events only.
[ 0.020000] Hierarchical SRCU implementation.
[ 0.020000] NMI watchdog: Perf event create on CPU 0 failed with -2
[ 0.020000] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.020000] smp: Bringing up secondary CPUs ...
[ 0.020000] smp: Brought up 1 node, 1 CPU
[ 0.020002] smpboot: Max logical packages: 1
[ 0.020344] smpboot: Total of 1 processors activated (5986.13 BogoMIPS)
[ 0.020980] devtmpfs: initialized
[ 0.021387] evm: security.selinux
[ 0.021663] evm: security.SMACK64
[ 0.021944] evm: security.SMACK64EXEC
[ 0.022247] evm: security.SMACK64TRANSMUTE
[ 0.022591] evm: security.SMACK64MMAP
[ 0.022886] evm: security.apparmor
[ 0.023160] evm: security.ima
[ 0.023405] evm: security.capability
[ 0.023793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.024003] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.024531] pinctrl core: initialized pinctrl subsystem
[ 0.025020] RTC time: 18:35:29, date: 12/22/17
[ 0.025439] NET: Registered protocol family 16
[ 0.025887] audit: initializing netlink subsys (disabled)
[ 0.026422] EISA bus registered
[ 0.026665] cpuidle: using governor ladder
[ 0.026969] cpuidle: using governor menu
[ 0.027312] ACPI: bus type PCI registered
[ 0.028002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.028704] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.029230] PCI: PCI BIOS revision 2.10 entry at 0xfd501, last bus=0
[ 0.029694] PCI: Using configuration type 1 for base access
[ 0.030909] audit: type=2000 audit(1513967729.679:1): state=initialized audit_enabled=0 res=1
[ 0.031587] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.032109] ACPI: Added _OSI(Module Device)
[ 0.032429] ACPI: Added _OSI(Processor Device)
[ 0.032756] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.033108] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.034537] ACPI: Interpreter enabled
[ 0.034835] ACPI: (supports S0 S3 S4 S5)
[ 0.035125] ACPI: Using IOAPIC for interrupt routing
[ 0.035496] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.036103] ACPI: Enabled 3 GPEs in block 00 to 0F
[ 0.038448] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.038925] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.039434] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.040013] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.041136] acpiphp: Slot [3] registered
[ 0.041451] acpiphp: Slot [4] registered
[ 0.041760] acpiphp: Slot [5] registered
[ 0.042071] acpiphp: Slot [6] registered
[ 0.042394] acpiphp: Slot [7] registered
[ 0.042702] acpiphp: Slot [8] registered
[ 0.043009] acpiphp: Slot [9] registered
[ 0.043316] acpiphp: Slot [10] registered
[ 0.044015] acpiphp: Slot [11] registered
[ 0.044410] acpiphp: Slot [12] registered
[ 0.044716] acpiphp: Slot [13] registered
[ 0.045025] acpiphp: Slot [14] registered
[ 0.045338] acpiphp: Slot [15] registered
[ 0.045647] acpiphp: Slot [16] registered
[ 0.045958] acpiphp: Slot [17] registered
[ 0.046268] acpiphp: Slot [18] registered
[ 0.046593] acpiphp: Slot [19] registered
[ 0.046907] acpiphp: Slot [20] registered
[ 0.047219] acpiphp: Slot [21] registered
[ 0.047530] acpiphp: Slot [22] registered
[ 0.047841] acpiphp: Slot [23] registered
[ 0.048013] acpiphp: Slot [24] registered
[ 0.048324] acpiphp: Slot [25] registered
[ 0.048634] acpiphp: Slot [26] registered
[ 0.048943] acpiphp: Slot [27] registered
[ 0.049253] acpiphp: Slot [28] registered
[ 0.049562] acpiphp: Slot [29] registered
[ 0.049879] acpiphp: Slot [30] registered
[ 0.050188] acpiphp: Slot [31] registered
[ 0.050512] PCI host bridge to bus 0000:00
[ 0.050821] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.051331] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.052002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.052553] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[ 0.053105] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.053531] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.053744] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.054019] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.056472] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f]
[ 0.057533] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.058077] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.058574] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.059101] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.059681] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.059880] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.060007] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.060658] pci 0000:00:02.0: [1b36:0100] type 00 class 0x030000
[ 0.064003] pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf7ffffff]
[ 0.068003] pci 0000:00:02.0: reg 0x14: [mem 0xf8000000-0xfbffffff]
[ 0.070419] pci 0000:00:02.0: reg 0x18: [mem 0xfc050000-0xfc051fff]
[ 0.073325] pci 0000:00:02.0: reg 0x1c: [io 0xc040-0xc05f]
[ 0.082303] pci 0000:00:02.0: reg 0x30: [mem 0xfc040000-0xfc04ffff pref]
[ 0.082474] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.084003] pci 0000:00:03.0: reg 0x10: [io 0xc060-0xc07f]
[ 0.085369] pci 0000:00:03.0: reg 0x14: [mem 0xfc052000-0xfc052fff]
[ 0.090491] pci 0000:00:03.0: reg 0x20: [mem 0xfebf8000-0xfebfbfff 64bit pref]
[ 0.092003] pci 0000:00:03.0: reg 0x30: [mem 0xfc000000-0xfc03ffff pref]
[ 0.092299] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.093679] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc03f]
[ 0.095047] pci 0000:00:04.0: reg 0x14: [mem 0xfc053000-0xfc053fff]
[ 0.099646] pci 0000:00:04.0: reg 0x20: [mem 0xfebfc000-0xfebfffff 64bit pref]
[ 0.102499] pci_bus 0000:00: on NUMA node 0
[ 0.102756] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.104063] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.104537] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.105005] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.105449] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.106887] WARNING: CPU: 0 PID: 1 at mm/memory_hotplug.c:867 default_movable_zone_for_pfn.isra.33.part.34+0x8/0x10
[ 0.107661] Modules linked in:
[ 0.107899] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc4+ #2
[ 0.108000] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 0.108000] EIP: default_movable_zone_for_pfn.isra.33.part.34+0x8/0x10
[ 0.108000] EFLAGS: 00210297 CPU: 0
[ 0.108000] EAX: c4c85480 EBX: 00001000 ECX: 00100000 EDX: 00000001
[ 0.108000] ESI: 00000001 EDI: 00000000 EBP: df4fbcf0 ESP: df4fbcf0
[ 0.108000] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 0.108000] CR0: 80050033 CR2: 00000000 CR3: 04ddb000 CR4: 000006f0
[ 0.108000] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 0.108000] DR6: fffe0ff0 DR7: 00000400
[ 0.108000] Call Trace:
[ 0.108000] zone_for_pfn_range+0x13b/0x150
[ 0.108000] online_pages+0x31/0x200
[ 0.108000] ? sysfs_create_file_ns+0x24/0x40
[ 0.108000] ? kobject_add_internal+0x18b/0x270
[ 0.108000] memory_subsys_online+0x16c/0x1b0
[ 0.108000] device_online+0x3b/0x80
[ 0.108000] online_memory_block+0x10/0x20
[ 0.108000] walk_memory_range+0x5c/0xa0
[ 0.108000] add_memory_resource+0x18c/0x1b0
[ 0.108000] ? online_pages_range+0xd0/0xd0
[ 0.108000] add_memory+0xbd/0x130
[ 0.108000] acpi_memory_device_add+0x103/0x2c0
[ 0.108000] acpi_bus_attach+0x132/0x1b0
[ 0.108000] acpi_bus_attach+0x76/0x1b0
[ 0.108000] acpi_bus_attach+0x76/0x1b0
[ 0.108000] acpi_bus_attach+0x76/0x1b0
[ 0.108000] acpi_bus_scan+0x41/0x90
[ 0.108000] ? acpi_sleep_proc_init+0x25/0x25
[ 0.108000] acpi_scan_init+0xf3/0x211
[ 0.108000] ? acpi_sleep_proc_init+0x25/0x25
[ 0.108000] acpi_init+0x2c0/0x314
[ 0.108000] do_one_initcall+0x46/0x170
[ 0.108000] ? parse_args+0x140/0x390
[ 0.108000] ? set_debug_rodata+0x14/0x14
[ 0.108000] kernel_init_freeable+0x146/0x1c2
[ 0.108000] ? rest_init+0xa0/0xa0
[ 0.108000] kernel_init+0xd/0xee
[ 0.108000] ret_from_fork+0x19/0x24
[ 0.108000] Code: 00 00 00 3e 8d 74 26 00 55 01 c2 89 e5 e8 71 95 fa ff 31 c0 5d c3 8d b6 00 00 00 00 8d bc 27 00 00 00 00 3e 8d 74 26 00 55 89 e5 <0f> ff 5d c3 8d 74 26 00 3e 8d 74 26 00 55 89 e5 56 53 89 c3 83
[ 0.108000] ---[ end trace e0d67f4d82fe1b11 ]---
[ 0.117764] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.118222] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.119005] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.119435] vgaarb: loaded
[ 0.119772] SCSI subsystem initialized
[ 0.120025] libata version 3.00 loaded.
[ 0.120037] ACPI: bus type USB registered
[ 0.120352] usbcore: registered new interface driver usbfs
[ 0.120786] usbcore: registered new interface driver hub
[ 0.121189] usbcore: registered new device driver usb
[ 0.121602] EDAC MC: Ver: 3.0.0
[ 0.121959] PCI: Using ACPI for IRQ routing
[ 0.122277] PCI: pci_cache_line_size set to 64 bytes
[ 0.122332] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.122333] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[ 0.122394] NetLabel: Initializing
[ 0.122673] NetLabel: domain hash size = 128
[ 0.122993] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.123421] NetLabel: unlabeled traffic allowed by default
[ 0.124009] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.124540] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.124899] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.127414] clocksource: Switched to clocksource kvm-clock
[ 0.131961] VFS: Disk quotas dquot_6.6.0
[ 0.132287] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.132856] AppArmor: AppArmor Filesystem Enabled
[ 0.133232] pnp: PnP ACPI init
[ 0.133505] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.133528] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.133543] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.133549] pnp 00:03: [dma 2]
[ 0.133557] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.133593] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.133622] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.133800] pnp: PnP ACPI: found 6 devices
[ 0.134116] PnPBIOS: Disabled
[ 0.169507] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.170204] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.170205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.170206] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.170207] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[ 0.170242] NET: Registered protocol family 2
[ 0.170681] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.171235] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.171730] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.172228] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.172690] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.173189] NET: Registered protocol family 1
[ 0.173530] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.173975] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.174402] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.174878] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.175627] PCI: CLS 0 bytes, default 64
[ 0.175656] Unpacking initramfs...
[ 0.761271] Freeing initrd memory: 46940K
[ 0.761741] Scanning for low memory corruption every 60 seconds
[ 0.762534] Initialise system trusted keyrings
[ 0.762884] Key type blacklist registered
[ 0.763231] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.764424] zbud: loaded
[ 0.764793] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.765324] fuse init (API version 7.26)
[ 0.766186] Key type asymmetric registered
[ 0.766501] Asymmetric key parser 'x509' registered
[ 0.766872] bounce: pool size: 64 pages
[ 0.767179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.767739] io scheduler noop registered
[ 0.768046] io scheduler deadline registered
[ 0.768397] io scheduler cfq registered (default)
[ 0.768831] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.769281] vesafb: scrolling: redraw
[ 0.769558] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.769982] vesafb: framebuffer at 0xf4000000, mapped to 0xa517b8b7, using 1216k, total 1216k
[ 0.771599] Console: switching to colour frame buffer device 80x30
[ 0.772736] fb0: VESA VGA frame buffer device
[ 0.773076] intel_idle: does not run on family 6 model 6
[ 0.773116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.773677] ACPI: Power Button [PWRF]
[ 0.774049] isapnp: Scanning for PnP cards...
[ 1.086593] isapnp: No Plug & Play device found
[ 1.100223] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.114313] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.115242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.137767] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.138939] Linux agpgart interface v0.103
[ 1.140127] loop: module loaded
[ 1.140481] ata_piix 0000:00:01.1: version 2.13
[ 1.141030] scsi host0: ata_piix
[ 1.141483] scsi host1: ata_piix
[ 1.141751] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc080 irq 14
[ 1.142239] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc088 irq 15
[ 1.142912] libphy: Fixed MDIO Bus: probed
[ 1.143234] tun: Universal TUN/TAP device driver, 1.6
[ 1.143629] PPP generic driver version 2.4.2
[ 1.143982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.144474] ehci-pci: EHCI PCI platform driver
[ 1.144812] ehci-platform: EHCI generic platform driver
[ 1.145202] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.145658] ohci-pci: OHCI PCI platform driver
[ 1.146000] ohci-platform: OHCI generic platform driver
[ 1.146393] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.146894] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.147914] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.148421] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.148856] mousedev: PS/2 mouse device common for all mice
[ 1.149412] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.150195] rtc_cmos 00:00: RTC can wake from S4
[ 1.150663] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.151186] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 1.151758] i2c /dev entries driver
[ 1.152123] device-mapper: uevent: version 1.0.3
[ 1.152702] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.153341] platform eisa.0: Probing EISA bus 0
[ 1.153677] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.154174] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.154644] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.155114] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.155601] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.156085] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.156559] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.157033] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.157504] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.157977] platform eisa.0: EISA: Detected 0 cards
[ 1.158338] cpufreq_nforce2: No nForce2 chipset
[ 1.158677] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.159259] NET: Registered protocol family 10
[ 1.161900] Segment Routing with IPv6
[ 1.162209] NET: Registered protocol family 17
[ 1.162564] Key type dns_resolver registered
[ 1.162992] Using IPI No-Shortcut mode
[ 1.163304] sched_clock: Marking stable (1160005056, 0)->(1345755251, -185750195)
[ 1.163922] registered taskstats version 1
[ 1.164251] Loading compiled-in X.509 certificates
[ 1.167964] Loaded X.509 cert 'Build time autogenerated kernel key: b4ef9de84e162704be7a4a85a145a1bab5d86143'
[ 1.168733] zswap: loaded using pool lzo/zbud
[ 1.171090] Key type big_key registered
[ 1.171404] Key type trusted registered
[ 1.172727] Key type encrypted registered
[ 1.173026] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.173407] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.173902] evm: HMAC attrs: 0x1
[ 1.174297] Magic number: 13:629:595
[ 1.174678] rtc_cmos 00:00: setting system clock to 2017-12-22 18:35:30 UTC (1513967730)
[ 1.175395] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.175893] EDD information not available.
[ 1.308524] ata2.01: NODEV after polling detection
[ 1.308747] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.309799] ata2.00: configured for MWDMA2
[ 1.310709] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.324618] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.325785] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.327076] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.327173] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.330039] Freeing unused kernel memory: 1044K
[ 1.330895] Write protecting the kernel text: 8736k
[ 1.331858] Write protecting the kernel read-only data: 3392k
[ 1.332849] NX-protecting the kernel data: 5600k
[ 1.333767] ------------[ cut here ]------------
[ 1.334560] x86/mm: Found insecure W+X mapping at address 6a1cd187/0xc00a0000
[ 1.335718] WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:237 note_page+0x670/0x860
[ 1.336365] Modules linked in:
[ 1.336594] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.15.0-rc4+ #2
[ 1.337150] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1.337793] EIP: note_page+0x670/0x860
[ 1.338070] EFLAGS: 00010292 CPU: 0
[ 1.338329] EAX: 00000041 EBX: df4fbf48 ECX: 000001d6 EDX: 00000000
[ 1.338783] ESI: 80000000 EDI: 00000000 EBP: df4fbf14 ESP: df4fbee8
[ 1.339265] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 1.339666] CR0: 80050033 CR2: b7d39128 CR3: 04ddb000 CR4: 000006f0
[ 1.340128] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 1.340591] DR6: fffe0ff0 DR7: 00000400
[ 1.340874] Call Trace:
[ 1.341060] ptdump_walk_pgd_level_core+0x1fc/0x2e0
[ 1.341424] ptdump_walk_pgd_level_checkwx+0x16/0x20
[ 1.341794] mark_rodata_ro+0xf5/0x117
[ 1.342075] ? rest_init+0xa0/0xa0
[ 1.342329] kernel_init+0x2e/0xee
[ 1.342586] ret_from_fork+0x19/0x24
[ 1.342854] Code: c4 e9 0c fb ff ff f7 c6 00 10 00 00 74 8c 68 fa 81 ac c4 e9 16 fe ff ff 52 52 68 98 82 ac c4 c6 05 a6 c0 c8 c4 01 e8 70 72 00 00 <0f> ff 8b 53 0c 83 c4 0c e9 38 fa ff ff 50 6a 08 52 6a 08 68 aa
[ 1.344297] ---[ end trace e0d67f4d82fe1b13 ]---
[ 1.344721] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
[ 1.417737] Floppy drive(s): fd0 is 2.88M AMI BIOS
[ 1.436209] FDC 0 is a S82078B
[ 1.442157] vda: vda1
[ 1.452860] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input4
[ 1.453623] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3
[ 1.486502] virtio_net virtio0 ens3: renamed from eth0
[ 1.523163] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 1.523623] [drm] Device Version 0.0
[ 1.523896] [drm] Compression level 0 log level 0
[ 1.524254] [drm] 12286 io pages at offset 0x1000000
[ 1.524623] [drm] 16777216 byte draw area at offset 0x0
[ 1.525013] [drm] RAM header offset: 0x3ffe000
[ 1.525364] [TTM] Zone kernel: Available graphics memory: 251964 kiB
[ 1.525840] [TTM] Initializing pool allocator
[ 1.526164] [TTM] Initializing DMA pool allocator
[ 1.526520] [drm] qxl: 16M of VRAM memory size
[ 1.526849] [drm] qxl: 63M of IO pages memory ready (VRAM domain)
[ 1.527309] [drm] qxl: 64M of Surface memory size
[ 1.528751] [drm] main mem slot 1 [f4000000,3ffe000]
[ 1.529134] [drm] surface mem slot 2 [f8000000,4000000]
[ 1.529687] [drm] fb mappable at 0xF4000000, size 3145728
[ 1.530091] [drm] fb: depth 24, pitch 4096, width 1024, height 768
[ 1.530544] checking generic (f4000000 130000) vs hw (f4000000 1000000)
[ 1.530545] fb: switching to qxldrmfb from VESA VGA
[ 1.530912] Console: switching to colour dummy device 80x25
[ 1.531681] fbcon: qxldrmfb (fb0) is primary device
[ 1.533763] Console: switching to colour frame buffer device 128x48
[ 1.538808] qxl 0000:00:02.0: fb0: qxldrmfb frame buffer device
[ 1.553527] [drm] Initialized qxl 0.1.0 20120117 for 0000:00:02.0 on minor 0
[ 1.684006] raid6: mmxx1 gen() 6370 MB/s
[ 1.752016] raid6: mmxx2 gen() 6546 MB/s
[ 1.820018] raid6: sse1x1 gen() 5447 MB/s
[ 1.888009] raid6: sse1x2 gen() 6651 MB/s
[ 1.956007] raid6: sse2x1 gen() 11137 MB/s
[ 2.024004] raid6: sse2x1 xor() 8240 MB/s
[ 2.092006] raid6: sse2x2 gen() 13450 MB/s
[ 2.160008] raid6: sse2x2 xor() 8759 MB/s
[ 2.160331] raid6: using algorithm sse2x2 gen() 13450 MB/s
[ 2.160732] raid6: .... xor() 8759 MB/s, rmw enabled
[ 2.161099] raid6: using intx1 recovery algorithm
[ 2.161499] tsc: Refined TSC clocksource calibration: 2993.007 MHz
[ 2.161959] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b24776bc64, max_idle_ns: 440795348589 ns
[ 2.166148] xor: measuring software checksum speed
[ 2.204005] pIII_sse : 19572.000 MB/sec
[ 2.244005] prefetch64-sse: 21508.000 MB/sec
[ 2.244393] xor: using function: prefetch64-sse (21508.000 MB/sec)
[ 2.247852] async_tx: api initialized (async)
[ 2.311665] Btrfs loaded, crc32c=crc32c-generic
[ 2.420115] print_req_error: I/O error, dev fd0, sector 0
[ 2.421215] floppy: error 10 while reading block 0
[ 2.450489] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.577843] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.583528] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 2.585139] systemd[1]: Detected virtualization kvm.
[ 2.585545] systemd[1]: Detected architecture x86.
[ 2.587722] systemd[1]: Set hostname to <mem-hotplug>.
[ 2.670054] systemd[1]: Reached target User and Group Name Lookups.
[ 2.671222] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.672930] systemd[1]: Created slice System Slice.
[ 2.673769] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.674690] systemd[1]: Listening on udev Control Socket.
[ 2.675616] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.732979] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 2.755589] Loading iSCSI transport class v2.0-870.
[ 2.809274] Adding 581564k swap on /swapfile. Priority:-2 extents:3 across:597948k FS
[ 2.817360] iscsi: registered transport (tcp)
[ 2.840163] systemd-journald[339]: Received request to flush runtime journal from PID 1
[ 2.901450] iscsi: registered transport (iser)
[ 3.066742] audit: type=1400 audit(1513967732.388:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=437 comm="apparmor_parser"
[ 3.066743] audit: type=1400 audit(1513967732.388:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=437 comm="apparmor_parser"
[ 3.066745] audit: type=1400 audit(1513967732.388:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=437 comm="apparmor_parser"
[ 3.066746] audit: type=1400 audit(1513967732.388:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=437 comm="apparmor_parser"
[ 3.071724] audit: type=1400 audit(1513967732.392:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=438 comm="apparmor_parser"
[ 3.071725] audit: type=1400 audit(1513967732.392:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=438 comm="apparmor_parser"
[ 3.071726] audit: type=1400 audit(1513967732.392:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=438 comm="apparmor_parser"
[ 3.071727] audit: type=1400 audit(1513967732.392:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
[ 3.072986] audit: type=1400 audit(1513967732.396:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=439 comm="apparmor_parser"
[ 3.121727] new mount options do not match the existing superblock, will be ignored
[ 3.354736] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 3.421529] parport_pc 00:04: reported by Plug and Play ACPI
[ 3.421602] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 3.802813] ppdev: user-space parallel port driver
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
2017-12-22 18:45 ` Seth Forshee
@ 2017-12-29 13:05 ` Michal Hocko
0 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-12-29 13:05 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Fri 22-12-17 12:45:15, Seth Forshee wrote:
> On Fri, Dec 22, 2017 at 10:12:40AM -0600, Seth Forshee wrote:
> > On Fri, Dec 22, 2017 at 03:49:25PM +0100, Michal Hocko wrote:
> > > On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> > > > On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > > > > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > > > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> > > > [...]
> > > > > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > > > > and the problem still occurs there. It's pointing to the call to
> > > > > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > > > > >
> > > > > > Hmm, this is interesting. That would mean that we have successfully
> > > > > > mapped the destination page but its memory is still not accessible.
> > > > > >
> > > > > > Right now I do not see how the patch you have bisected to could make any
> > > > > > difference because it only postponed the onlining to be independent but
> > > > > > your config simply onlines automatically so there shouldn't be any
> > > > > > semantic change. Maybe there is some sort of off-by-one or something.
> > > > > >
> > > > > > I will try to investigate some more. Do you think it would be possible
> > > > > > to configure kdump on your system and provide me with the vmcore in some
> > > > > > way?
> > > > >
> > > > > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > > > > It came to my attention again recently though.
> > > >
> > > > Apology on my side. This has completely fall of my radar.
> > > >
> > > > > I was looking through the hotplug rework changes, and I noticed that
> > > > > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > > > > rework it doesn't look like it's possible for memory to be associated
> > > > > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > > > > and am now no longer seeing the oopses.
> > > >
> > > > Thanks a lot for debugging! Do I read the above correctly that the
> > > > current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> > > > this zone and that leads to later blowups? Could you attach the fresh
> > > > boot dmesg output please?
> > > >
> > > > > I'm sure this isn't the correct fix, but I think it does confirm that
> > > > > the problem is that the memory should be associated with ZONE_HIGHMEM
> > > > > but is not.
> > > >
> > > >
> > > > Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> > > > zone. The kernel cannot access that memory directly. It is essentially a
> > > > movable zone from the hotplug API POV. We simply do not have any way to
> > > > tell into which zone we want to online this memory range in.
> > > > Unfortunately both zones _can_ be present. It would require an explicit
> > > > configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> > > > or and movable memory configured explicitly on the kernel command line).
> > > >
> > > > The below patch is not really complete but I would rather start simple.
> > > > Maybe we do not even have to care as most 32b users will never use both
> > > > zones at the same time. I've placed a warning to learn about those.
> > > >
> > > > Does this pass your testing?
> > >
> > > Any chances to test this?
> >
> > Yes, I should get to testing it soon. I'm working through a backlog of
> > things I need to get done and this just hasn't quite made it to the top.
>
> I started by testing vanilla 4.15-rc4 with a vm that has several memory
> slots already populated at boot. With that I no longer get an oops,
> however while /sys/devices/system/memory/*/online is 1 it looks like the
> memory isn't being used. With your patch the behavior is the same. I'm
> attaching dmesg from both kernels.
What do you mean? The overal available memory doesn't match the size of
all memblocks?
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: Memory hotplug regression in 4.13
@ 2017-12-29 13:05 ` Michal Hocko
0 siblings, 0 replies; 20+ messages in thread
From: Michal Hocko @ 2017-12-29 13:05 UTC (permalink / raw)
To: Seth Forshee; +Cc: linux-mm, linux-kernel
On Fri 22-12-17 12:45:15, Seth Forshee wrote:
> On Fri, Dec 22, 2017 at 10:12:40AM -0600, Seth Forshee wrote:
> > On Fri, Dec 22, 2017 at 03:49:25PM +0100, Michal Hocko wrote:
> > > On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> > > > On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > > > > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > > > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> > > > [...]
> > > > > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > > > > and the problem still occurs there. It's pointing to the call to
> > > > > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > > > > >
> > > > > > Hmm, this is interesting. That would mean that we have successfully
> > > > > > mapped the destination page but its memory is still not accessible.
> > > > > >
> > > > > > Right now I do not see how the patch you have bisected to could make any
> > > > > > difference because it only postponed the onlining to be independent but
> > > > > > your config simply onlines automatically so there shouldn't be any
> > > > > > semantic change. Maybe there is some sort of off-by-one or something.
> > > > > >
> > > > > > I will try to investigate some more. Do you think it would be possible
> > > > > > to configure kdump on your system and provide me with the vmcore in some
> > > > > > way?
> > > > >
> > > > > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > > > > It came to my attention again recently though.
> > > >
> > > > Apology on my side. This has completely fall of my radar.
> > > >
> > > > > I was looking through the hotplug rework changes, and I noticed that
> > > > > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > > > > rework it doesn't look like it's possible for memory to be associated
> > > > > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > > > > and am now no longer seeing the oopses.
> > > >
> > > > Thanks a lot for debugging! Do I read the above correctly that the
> > > > current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> > > > this zone and that leads to later blowups? Could you attach the fresh
> > > > boot dmesg output please?
> > > >
> > > > > I'm sure this isn't the correct fix, but I think it does confirm that
> > > > > the problem is that the memory should be associated with ZONE_HIGHMEM
> > > > > but is not.
> > > >
> > > >
> > > > Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> > > > zone. The kernel cannot access that memory directly. It is essentially a
> > > > movable zone from the hotplug API POV. We simply do not have any way to
> > > > tell into which zone we want to online this memory range in.
> > > > Unfortunately both zones _can_ be present. It would require an explicit
> > > > configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> > > > or and movable memory configured explicitly on the kernel command line).
> > > >
> > > > The below patch is not really complete but I would rather start simple.
> > > > Maybe we do not even have to care as most 32b users will never use both
> > > > zones at the same time. I've placed a warning to learn about those.
> > > >
> > > > Does this pass your testing?
> > >
> > > Any chances to test this?
> >
> > Yes, I should get to testing it soon. I'm working through a backlog of
> > things I need to get done and this just hasn't quite made it to the top.
>
> I started by testing vanilla 4.15-rc4 with a vm that has several memory
> slots already populated at boot. With that I no longer get an oops,
> however while /sys/devices/system/memory/*/online is 1 it looks like the
> memory isn't being used. With your patch the behavior is the same. I'm
> attaching dmesg from both kernels.
What do you mean? The overal available memory doesn't match the size of
all memblocks?
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2017-12-29 13:05 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-19 16:41 Memory hotplug regression in 4.13 Seth Forshee
2017-09-20 9:29 ` Michal Hocko
2017-09-20 9:29 ` Michal Hocko
2017-09-21 5:40 ` Seth Forshee
2017-09-21 5:40 ` Seth Forshee
2017-09-25 12:58 ` Michal Hocko
2017-09-25 12:58 ` Michal Hocko
2017-12-01 14:23 ` Seth Forshee
2017-12-01 14:23 ` Seth Forshee
2017-12-18 14:53 ` Michal Hocko
2017-12-18 14:53 ` Michal Hocko
2017-12-18 17:54 ` Randy Dunlap
2017-12-18 17:54 ` Randy Dunlap
2017-12-22 14:49 ` Michal Hocko
2017-12-22 14:49 ` Michal Hocko
2017-12-22 16:12 ` Seth Forshee
2017-12-22 16:12 ` Seth Forshee
2017-12-22 18:45 ` Seth Forshee
2017-12-29 13:05 ` Michal Hocko
2017-12-29 13:05 ` Michal Hocko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.