* [PATCH v3 0/5] media: atmel-isc: Rework the format list and clock provider
@ 2017-09-28 8:18 ` Wenyou Yang
0 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-kernel, Nicolas Ferre, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel, Linux Media Mailing List,
Wenyou Yang
To improve the readability of code, rework the format list table,
split the format array into two. Meanwhile, fix the issue of the
clock provider operation.
Changes in v3:
- Fix the wrong used spinlock.
- s/_/- on the subject.
- Add a new flag for Raw Bayer format to remove MAX_RAW_FMT_INDEX define.
- Add the comments for define of the format flag.
- Rebase media_tree/master.
Changes in v2:
- Add the new patch to remove the unnecessary member from
isc_subdev_entity struct.
- Rebase on the patch set,
[PATCH 0/6] [media] Atmel: Adjustments for seven function implementations
https://www.mail-archive.com/linux-media@vger.kernel.org/msg118342.html
Wenyou Yang (5):
media: atmel-isc: Add spin lock for clock enable ops
media: atmel-isc: Add prepare and unprepare ops
media: atmel-isc: Enable the clocks during probe
media: atmel-isc: Remove unnecessary member
media: atmel-isc: Rework the format list
drivers/media/platform/atmel/atmel-isc-regs.h | 1 +
drivers/media/platform/atmel/atmel-isc.c | 616 ++++++++++++++++++++------
2 files changed, 483 insertions(+), 134 deletions(-)
--
2.13.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 0/5] media: atmel-isc: Rework the format list and clock provider
@ 2017-09-28 8:18 ` Wenyou Yang
0 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: linux-arm-kernel
To improve the readability of code, rework the format list table,
split the format array into two. Meanwhile, fix the issue of the
clock provider operation.
Changes in v3:
- Fix the wrong used spinlock.
- s/_/- on the subject.
- Add a new flag for Raw Bayer format to remove MAX_RAW_FMT_INDEX define.
- Add the comments for define of the format flag.
- Rebase media_tree/master.
Changes in v2:
- Add the new patch to remove the unnecessary member from
isc_subdev_entity struct.
- Rebase on the patch set,
[PATCH 0/6] [media] Atmel: Adjustments for seven function implementations
https://www.mail-archive.com/linux-media at vger.kernel.org/msg118342.html
Wenyou Yang (5):
media: atmel-isc: Add spin lock for clock enable ops
media: atmel-isc: Add prepare and unprepare ops
media: atmel-isc: Enable the clocks during probe
media: atmel-isc: Remove unnecessary member
media: atmel-isc: Rework the format list
drivers/media/platform/atmel/atmel-isc-regs.h | 1 +
drivers/media/platform/atmel/atmel-isc.c | 616 ++++++++++++++++++++------
2 files changed, 483 insertions(+), 134 deletions(-)
--
2.13.0
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 1/5] media: atmel-isc: Add spin lock for clock enable ops
2017-09-28 8:18 ` Wenyou Yang
@ 2017-09-28 8:18 ` Wenyou Yang
-1 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-kernel, Nicolas Ferre, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel, Linux Media Mailing List,
Wenyou Yang
Add the spin lock for the clock enable and disable operations.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3:
- Fix the wrong used spinlock.
- s/_/- on the subject.
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 2f8e345d297e..991f962b7023 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -65,6 +65,7 @@ struct isc_clk {
struct clk_hw hw;
struct clk *clk;
struct regmap *regmap;
+ spinlock_t lock;
u8 id;
u8 parent_id;
u32 div;
@@ -312,26 +313,37 @@ static int isc_clk_enable(struct clk_hw *hw)
struct isc_clk *isc_clk = to_isc_clk(hw);
u32 id = isc_clk->id;
struct regmap *regmap = isc_clk->regmap;
+ unsigned long flags;
+ unsigned int status;
dev_dbg(isc_clk->dev, "ISC CLK: %s, div = %d, parent id = %d\n",
__func__, isc_clk->div, isc_clk->parent_id);
+ spin_lock_irqsave(&isc_clk->lock, flags);
regmap_update_bits(regmap, ISC_CLKCFG,
ISC_CLKCFG_DIV_MASK(id) | ISC_CLKCFG_SEL_MASK(id),
(isc_clk->div << ISC_CLKCFG_DIV_SHIFT(id)) |
(isc_clk->parent_id << ISC_CLKCFG_SEL_SHIFT(id)));
regmap_write(regmap, ISC_CLKEN, ISC_CLK(id));
+ spin_unlock_irqrestore(&isc_clk->lock, flags);
- return 0;
+ regmap_read(regmap, ISC_CLKSR, &status);
+ if (status & ISC_CLK(id))
+ return 0;
+ else
+ return -EINVAL;
}
static void isc_clk_disable(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
u32 id = isc_clk->id;
+ unsigned long flags;
+ spin_lock_irqsave(&isc_clk->lock, flags);
regmap_write(isc_clk->regmap, ISC_CLKDIS, ISC_CLK(id));
+ spin_unlock_irqrestore(&isc_clk->lock, flags);
}
static int isc_clk_is_enabled(struct clk_hw *hw)
@@ -492,6 +504,7 @@ static int isc_clk_register(struct isc_device *isc, unsigned int id)
isc_clk->regmap = regmap;
isc_clk->id = id;
isc_clk->dev = isc->dev;
+ spin_lock_init(&isc_clk->lock);
isc_clk->clk = clk_register(isc->dev, &isc_clk->hw);
if (IS_ERR(isc_clk->clk)) {
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 1/5] media: atmel-isc: Add spin lock for clock enable ops
@ 2017-09-28 8:18 ` Wenyou Yang
0 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: linux-arm-kernel
Add the spin lock for the clock enable and disable operations.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3:
- Fix the wrong used spinlock.
- s/_/- on the subject.
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 2f8e345d297e..991f962b7023 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -65,6 +65,7 @@ struct isc_clk {
struct clk_hw hw;
struct clk *clk;
struct regmap *regmap;
+ spinlock_t lock;
u8 id;
u8 parent_id;
u32 div;
@@ -312,26 +313,37 @@ static int isc_clk_enable(struct clk_hw *hw)
struct isc_clk *isc_clk = to_isc_clk(hw);
u32 id = isc_clk->id;
struct regmap *regmap = isc_clk->regmap;
+ unsigned long flags;
+ unsigned int status;
dev_dbg(isc_clk->dev, "ISC CLK: %s, div = %d, parent id = %d\n",
__func__, isc_clk->div, isc_clk->parent_id);
+ spin_lock_irqsave(&isc_clk->lock, flags);
regmap_update_bits(regmap, ISC_CLKCFG,
ISC_CLKCFG_DIV_MASK(id) | ISC_CLKCFG_SEL_MASK(id),
(isc_clk->div << ISC_CLKCFG_DIV_SHIFT(id)) |
(isc_clk->parent_id << ISC_CLKCFG_SEL_SHIFT(id)));
regmap_write(regmap, ISC_CLKEN, ISC_CLK(id));
+ spin_unlock_irqrestore(&isc_clk->lock, flags);
- return 0;
+ regmap_read(regmap, ISC_CLKSR, &status);
+ if (status & ISC_CLK(id))
+ return 0;
+ else
+ return -EINVAL;
}
static void isc_clk_disable(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
u32 id = isc_clk->id;
+ unsigned long flags;
+ spin_lock_irqsave(&isc_clk->lock, flags);
regmap_write(isc_clk->regmap, ISC_CLKDIS, ISC_CLK(id));
+ spin_unlock_irqrestore(&isc_clk->lock, flags);
}
static int isc_clk_is_enabled(struct clk_hw *hw)
@@ -492,6 +504,7 @@ static int isc_clk_register(struct isc_device *isc, unsigned int id)
isc_clk->regmap = regmap;
isc_clk->id = id;
isc_clk->dev = isc->dev;
+ spin_lock_init(&isc_clk->lock);
isc_clk->clk = clk_register(isc->dev, &isc_clk->hw);
if (IS_ERR(isc_clk->clk)) {
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 2/5] media: atmel-isc: Add prepare and unprepare ops
2017-09-28 8:18 ` Wenyou Yang
@ 2017-09-28 8:18 ` Wenyou Yang
-1 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-kernel, Nicolas Ferre, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel, Linux Media Mailing List,
Wenyou Yang
A software write operation to the ISC_CLKEN or ISC_CLKDIS register
requires double clock domain synchronization and is not permitted
when the ISC_SR.SIP is asserted. So add the .prepare and .unprepare
ops to make sure the ISC_CLKSR.SIP is unasserted before the write
operation to the ISC_CLKEN or ISC_CLKDIS register.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc-regs.h | 1 +
drivers/media/platform/atmel/atmel-isc.c | 30 +++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
index 6936ac467609..93e58fcf1d5f 100644
--- a/drivers/media/platform/atmel/atmel-isc-regs.h
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -42,6 +42,7 @@
/* ISC Clock Status Register */
#define ISC_CLKSR 0x00000020
+#define ISC_CLKSR_SIP BIT(31)
#define ISC_CLK(n) BIT(n)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 991f962b7023..0b15dc1a3a0b 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -308,6 +308,34 @@ module_param(sensor_preferred, uint, 0644);
MODULE_PARM_DESC(sensor_preferred,
"Sensor is preferred to output the specified format (1-on 0-off), default 1");
+static int isc_wait_clk_stable(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ struct regmap *regmap = isc_clk->regmap;
+ unsigned long timeout = jiffies + usecs_to_jiffies(1000);
+ unsigned int status;
+
+ while (time_before(jiffies, timeout)) {
+ regmap_read(regmap, ISC_CLKSR, &status);
+ if (!(status & ISC_CLKSR_SIP))
+ return 0;
+
+ usleep_range(10, 250);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int isc_clk_prepare(struct clk_hw *hw)
+{
+ return isc_wait_clk_stable(hw);
+}
+
+static void isc_clk_unprepare(struct clk_hw *hw)
+{
+ isc_wait_clk_stable(hw);
+}
+
static int isc_clk_enable(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
@@ -459,6 +487,8 @@ static int isc_clk_set_rate(struct clk_hw *hw,
}
static const struct clk_ops isc_clk_ops = {
+ .prepare = isc_clk_prepare,
+ .unprepare = isc_clk_unprepare,
.enable = isc_clk_enable,
.disable = isc_clk_disable,
.is_enabled = isc_clk_is_enabled,
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 2/5] media: atmel-isc: Add prepare and unprepare ops
@ 2017-09-28 8:18 ` Wenyou Yang
0 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: linux-arm-kernel
A software write operation to the ISC_CLKEN or ISC_CLKDIS register
requires double clock domain synchronization and is not permitted
when the ISC_SR.SIP is asserted. So add the .prepare and .unprepare
ops to make sure the ISC_CLKSR.SIP is unasserted before the write
operation to the ISC_CLKEN or ISC_CLKDIS register.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc-regs.h | 1 +
drivers/media/platform/atmel/atmel-isc.c | 30 +++++++++++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
index 6936ac467609..93e58fcf1d5f 100644
--- a/drivers/media/platform/atmel/atmel-isc-regs.h
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -42,6 +42,7 @@
/* ISC Clock Status Register */
#define ISC_CLKSR 0x00000020
+#define ISC_CLKSR_SIP BIT(31)
#define ISC_CLK(n) BIT(n)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 991f962b7023..0b15dc1a3a0b 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -308,6 +308,34 @@ module_param(sensor_preferred, uint, 0644);
MODULE_PARM_DESC(sensor_preferred,
"Sensor is preferred to output the specified format (1-on 0-off), default 1");
+static int isc_wait_clk_stable(struct clk_hw *hw)
+{
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ struct regmap *regmap = isc_clk->regmap;
+ unsigned long timeout = jiffies + usecs_to_jiffies(1000);
+ unsigned int status;
+
+ while (time_before(jiffies, timeout)) {
+ regmap_read(regmap, ISC_CLKSR, &status);
+ if (!(status & ISC_CLKSR_SIP))
+ return 0;
+
+ usleep_range(10, 250);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int isc_clk_prepare(struct clk_hw *hw)
+{
+ return isc_wait_clk_stable(hw);
+}
+
+static void isc_clk_unprepare(struct clk_hw *hw)
+{
+ isc_wait_clk_stable(hw);
+}
+
static int isc_clk_enable(struct clk_hw *hw)
{
struct isc_clk *isc_clk = to_isc_clk(hw);
@@ -459,6 +487,8 @@ static int isc_clk_set_rate(struct clk_hw *hw,
}
static const struct clk_ops isc_clk_ops = {
+ .prepare = isc_clk_prepare,
+ .unprepare = isc_clk_unprepare,
.enable = isc_clk_enable,
.disable = isc_clk_disable,
.is_enabled = isc_clk_is_enabled,
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
2017-09-28 8:18 ` Wenyou Yang
@ 2017-09-28 8:18 ` Wenyou Yang
-1 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-kernel, Nicolas Ferre, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel, Linux Media Mailing List,
Wenyou Yang
To meet the relationship, enable the HCLOCK and ispck during the
device probe, "isc_pck frequency is less than or equal to isc_ispck,
and isc_ispck is greater than or equal to HCLOCK."
Meanwhile, call the pm_runtime_enable() in the right place.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
1 file changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 0b15dc1a3a0b..f092c95587c1 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
struct isc_subdev_entity *sd_entity;
struct video_device *vdev = &isc->video_dev;
struct vb2_queue *q = &isc->vb2_vidq;
+ struct device *dev = isc->dev;
int ret;
ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
@@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
return ret;
}
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_request_idle(dev);
+
return 0;
}
@@ -1856,25 +1861,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare_enable(isc->hclock);
+ if (ret) {
+ dev_err(dev, "failed to enable hclock: %d\n", ret);
+ return ret;
+ }
+
ret = isc_clk_init(isc);
if (ret) {
dev_err(dev, "failed to init isc clock: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_hclk;
}
isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
+ ret = clk_prepare_enable(isc->ispck);
+ if (ret) {
+ dev_err(dev, "failed to enable ispck: %d\n", ret);
+ goto unprepare_hclk;
+ }
+
/* ispck should be greater or equal to hclock */
ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
if (ret) {
dev_err(dev, "failed to set ispck rate: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = v4l2_device_register(dev, &isc->v4l2_dev);
if (ret) {
dev_err(dev, "unable to register v4l2 device.\n");
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = isc_parse_dt(dev, isc);
@@ -1907,8 +1924,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
break;
}
- pm_runtime_enable(dev);
-
return 0;
cleanup_subdev:
@@ -1917,7 +1932,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
unregister_v4l2_device:
v4l2_device_unregister(&isc->v4l2_dev);
-clean_isc_clk:
+unprepare_clk:
+ clk_disable_unprepare(isc->ispck);
+unprepare_hclk:
+ clk_disable_unprepare(isc->hclock);
+
isc_clk_cleanup(isc);
return ret;
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
@ 2017-09-28 8:18 ` Wenyou Yang
0 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: linux-arm-kernel
To meet the relationship, enable the HCLOCK and ispck during the
device probe, "isc_pck frequency is less than or equal to isc_ispck,
and isc_ispck is greater than or equal to HCLOCK."
Meanwhile, call the pm_runtime_enable() in the right place.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
1 file changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 0b15dc1a3a0b..f092c95587c1 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
struct isc_subdev_entity *sd_entity;
struct video_device *vdev = &isc->video_dev;
struct vb2_queue *q = &isc->vb2_vidq;
+ struct device *dev = isc->dev;
int ret;
ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
@@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
return ret;
}
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_request_idle(dev);
+
return 0;
}
@@ -1856,25 +1861,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
return ret;
}
+ ret = clk_prepare_enable(isc->hclock);
+ if (ret) {
+ dev_err(dev, "failed to enable hclock: %d\n", ret);
+ return ret;
+ }
+
ret = isc_clk_init(isc);
if (ret) {
dev_err(dev, "failed to init isc clock: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_hclk;
}
isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
+ ret = clk_prepare_enable(isc->ispck);
+ if (ret) {
+ dev_err(dev, "failed to enable ispck: %d\n", ret);
+ goto unprepare_hclk;
+ }
+
/* ispck should be greater or equal to hclock */
ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
if (ret) {
dev_err(dev, "failed to set ispck rate: %d\n", ret);
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = v4l2_device_register(dev, &isc->v4l2_dev);
if (ret) {
dev_err(dev, "unable to register v4l2 device.\n");
- goto clean_isc_clk;
+ goto unprepare_clk;
}
ret = isc_parse_dt(dev, isc);
@@ -1907,8 +1924,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
break;
}
- pm_runtime_enable(dev);
-
return 0;
cleanup_subdev:
@@ -1917,7 +1932,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
unregister_v4l2_device:
v4l2_device_unregister(&isc->v4l2_dev);
-clean_isc_clk:
+unprepare_clk:
+ clk_disable_unprepare(isc->ispck);
+unprepare_hclk:
+ clk_disable_unprepare(isc->hclock);
+
isc_clk_cleanup(isc);
return ret;
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 4/5] media: atmel-isc: Remove unnecessary member
2017-09-28 8:18 ` Wenyou Yang
@ 2017-09-28 8:18 ` Wenyou Yang
-1 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-kernel, Nicolas Ferre, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel, Linux Media Mailing List,
Wenyou Yang
Remove the memeber *config from the isc_subdev_entity struct,
the member is useless afterward.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index f092c95587c1..0ff9dfbfff70 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -83,7 +83,6 @@ struct isc_subdev_entity {
struct v4l2_subdev *sd;
struct v4l2_async_subdev *asd;
struct v4l2_async_notifier notifier;
- struct v4l2_subdev_pad_config *config;
u32 pfe_cfg0;
@@ -984,6 +983,7 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
{
struct isc_format *isc_fmt;
struct v4l2_pix_format *pixfmt = &f->fmt.pix;
+ struct v4l2_subdev_pad_config pad_cfg;
struct v4l2_subdev_format format = {
.which = V4L2_SUBDEV_FORMAT_TRY,
};
@@ -1014,7 +1014,7 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code);
ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt,
- isc->current_subdev->config, &format);
+ &pad_cfg, &format);
if (ret < 0)
return ret;
@@ -1479,8 +1479,6 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
struct isc_device, v4l2_dev);
cancel_work_sync(&isc->awb_work);
video_unregister_device(&isc->video_dev);
- if (isc->current_subdev->config)
- v4l2_subdev_free_pad_config(isc->current_subdev->config);
v4l2_ctrl_handler_free(&isc->ctrls.handler);
}
@@ -1633,10 +1631,6 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
INIT_LIST_HEAD(&isc->dma_queue);
spin_lock_init(&isc->dma_queue_lock);
- sd_entity->config = v4l2_subdev_alloc_pad_config(sd_entity->sd);
- if (!sd_entity->config)
- return -ENOMEM;
-
ret = isc_formats_init(isc);
if (ret < 0) {
v4l2_err(&isc->v4l2_dev,
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 4/5] media: atmel-isc: Remove unnecessary member
@ 2017-09-28 8:18 ` Wenyou Yang
0 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: linux-arm-kernel
Remove the memeber *config from the isc_subdev_entity struct,
the member is useless afterward.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3: None
Changes in v2: None
drivers/media/platform/atmel/atmel-isc.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index f092c95587c1..0ff9dfbfff70 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -83,7 +83,6 @@ struct isc_subdev_entity {
struct v4l2_subdev *sd;
struct v4l2_async_subdev *asd;
struct v4l2_async_notifier notifier;
- struct v4l2_subdev_pad_config *config;
u32 pfe_cfg0;
@@ -984,6 +983,7 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
{
struct isc_format *isc_fmt;
struct v4l2_pix_format *pixfmt = &f->fmt.pix;
+ struct v4l2_subdev_pad_config pad_cfg;
struct v4l2_subdev_format format = {
.which = V4L2_SUBDEV_FORMAT_TRY,
};
@@ -1014,7 +1014,7 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code);
ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt,
- isc->current_subdev->config, &format);
+ &pad_cfg, &format);
if (ret < 0)
return ret;
@@ -1479,8 +1479,6 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
struct isc_device, v4l2_dev);
cancel_work_sync(&isc->awb_work);
video_unregister_device(&isc->video_dev);
- if (isc->current_subdev->config)
- v4l2_subdev_free_pad_config(isc->current_subdev->config);
v4l2_ctrl_handler_free(&isc->ctrls.handler);
}
@@ -1633,10 +1631,6 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
INIT_LIST_HEAD(&isc->dma_queue);
spin_lock_init(&isc->dma_queue_lock);
- sd_entity->config = v4l2_subdev_alloc_pad_config(sd_entity->sd);
- if (!sd_entity->config)
- return -ENOMEM;
-
ret = isc_formats_init(isc);
if (ret < 0) {
v4l2_err(&isc->v4l2_dev,
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 5/5] media: atmel-isc: Rework the format list
2017-09-28 8:18 ` Wenyou Yang
@ 2017-09-28 8:18 ` Wenyou Yang
-1 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-kernel, Nicolas Ferre, Sakari Ailus, Jonathan Corbet,
Hans Verkuil, linux-arm-kernel, Linux Media Mailing List,
Wenyou Yang
To improve the readability of code, split the format array into two,
one for the format description, other for the register configuration.
Meanwhile, add the flag member to indicate the format can be achieved
from the sensor or be produced by the controller, and rename members
related to the register configuration.
Also add more formats support: GREY, ARGB444, ARGB555 and ARGB32.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3:
- Add a new flag for Raw Bayer format to remove MAX_RAW_FMT_INDEX define.
- Add the comments for define of the format flag.
- Rebase media_tree/master.
Changes in v2:
- Add the new patch to remove the unnecessary member from
isc_subdev_entity struct.
- Rebase on the patch set,
[PATCH 0/6] [media] Atmel: Adjustments for seven function implementations
https://www.mail-archive.com/linux-media@vger.kernel.org/msg118342.html
drivers/media/platform/atmel/atmel-isc.c | 530 ++++++++++++++++++++++++-------
1 file changed, 411 insertions(+), 119 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 0ff9dfbfff70..d2f8c05ad0ce 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -89,34 +89,63 @@ struct isc_subdev_entity {
struct list_head list;
};
+/* Indicate the format is generated by the sensor */
+#define FMT_FLAG_FROM_SENSOR BIT(0)
+/* Indicate the format is produced by ISC itself */
+#define FMT_FLAG_FROM_CONTROLLER BIT(1)
+/* Indicate a Raw Bayer format */
+#define FMT_FLAG_RAW_FORMAT BIT(2)
+
+#define FMT_FLAG_RAW_FROM_SENSOR (FMT_FLAG_FROM_SENSOR | \
+ FMT_FLAG_RAW_FORMAT)
+
/*
* struct isc_format - ISC media bus format information
* @fourcc: Fourcc code for this format
* @mbus_code: V4L2 media bus format code.
+ * flags: Indicate format from sensor or converted by controller
* @bpp: Bits per pixel (when stored in memory)
- * @reg_bps: reg value for bits per sample
* (when transferred over a bus)
- * @pipeline: pipeline switch
* @sd_support: Subdev supports this format
* @isc_support: ISC can convert raw format to this format
*/
+
struct isc_format {
u32 fourcc;
u32 mbus_code;
+ u32 flags;
u8 bpp;
- u32 reg_bps;
- u32 reg_bay_cfg;
- u32 reg_rlp_mode;
- u32 reg_dcfg_imode;
- u32 reg_dctrl_dview;
-
- u32 pipeline;
-
bool sd_support;
bool isc_support;
};
+/* Pipeline bitmap */
+#define WB_ENABLE BIT(0)
+#define CFA_ENABLE BIT(1)
+#define CC_ENABLE BIT(2)
+#define GAM_ENABLE BIT(3)
+#define GAM_BENABLE BIT(4)
+#define GAM_GENABLE BIT(5)
+#define GAM_RENABLE BIT(6)
+#define CSC_ENABLE BIT(7)
+#define CBC_ENABLE BIT(8)
+#define SUB422_ENABLE BIT(9)
+#define SUB420_ENABLE BIT(10)
+
+#define GAM_ENABLES (GAM_RENABLE | GAM_GENABLE | GAM_BENABLE | GAM_ENABLE)
+
+struct fmt_config {
+ u32 fourcc;
+
+ u32 pfe_cfg0_bps;
+ u32 cfa_baycfg;
+ u32 rlp_cfg_mode;
+ u32 dcfg_imode;
+ u32 dctrl_dview;
+
+ u32 bits_pipeline;
+};
#define HIST_ENTRIES 512
#define HIST_BAYER (ISC_HIS_CFG_MODE_B + 1)
@@ -181,80 +210,320 @@ struct isc_device {
struct list_head subdev_entities;
};
-#define RAW_FMT_IND_START 0
-#define RAW_FMT_IND_END 11
-#define ISC_FMT_IND_START 12
-#define ISC_FMT_IND_END 14
-
-static struct isc_format isc_formats[] = {
- { V4L2_PIX_FMT_SBGGR8, MEDIA_BUS_FMT_SBGGR8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGBRG8, MEDIA_BUS_FMT_SGBRG8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGRBG8, MEDIA_BUS_FMT_SGRBG8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SRGGB8, MEDIA_BUS_FMT_SRGGB8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
-
- { V4L2_PIX_FMT_SBGGR10, MEDIA_BUS_FMT_SBGGR10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGBRG10, MEDIA_BUS_FMT_SGBRG10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGRBG10, MEDIA_BUS_FMT_SGRBG10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SRGGB10, MEDIA_BUS_FMT_SRGGB10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
-
- { V4L2_PIX_FMT_SBGGR12, MEDIA_BUS_FMT_SBGGR12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGBRG12, MEDIA_BUS_FMT_SGBRG12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGRBG12, MEDIA_BUS_FMT_SGRBG12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SRGGB12, MEDIA_BUS_FMT_SRGGB12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
-
- { V4L2_PIX_FMT_YUV420, 0x0, 12,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
- ISC_DCFG_IMODE_YC420P, ISC_DCTRL_DVIEW_PLANAR, 0x7fb,
- false, false },
- { V4L2_PIX_FMT_YUV422P, 0x0, 16,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
- ISC_DCFG_IMODE_YC422P, ISC_DCTRL_DVIEW_PLANAR, 0x3fb,
- false, false },
- { V4L2_PIX_FMT_RGB565, MEDIA_BUS_FMT_RGB565_2X8_LE, 16,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_RGB565,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x7b,
- false, false },
-
- { V4L2_PIX_FMT_YUYV, MEDIA_BUS_FMT_YUYV8_2X8, 16,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
+static struct isc_format formats_list[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR10,
+ .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG10,
+ .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG10,
+ .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB10,
+ .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR12,
+ .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG12,
+ .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG12,
+ .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB12,
+ .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV420,
+ .mbus_code = 0x0,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 12,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV422P,
+ .mbus_code = 0x0,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_GREY,
+ .mbus_code = MEDIA_BUS_FMT_Y8_1X8,
+ .flags = FMT_FLAG_FROM_CONTROLLER |
+ FMT_FLAG_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB444,
+ .mbus_code = MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB555,
+ .mbus_code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB32,
+ .mbus_code = MEDIA_BUS_FMT_ARGB8888_1X32,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 32,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .flags = FMT_FLAG_FROM_CONTROLLER |
+ FMT_FLAG_FROM_SENSOR,
+ .bpp = 16,
+ },
+};
+
+struct fmt_config fmt_configs_list[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_GBGB,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_GRGR,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_RGRG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_GBGB,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_GRGR,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_RGRG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_GBGB,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_GRGR,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_RGRG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV420,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC,
+ .dcfg_imode = ISC_DCFG_IMODE_YC420P,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PLANAR,
+ .bits_pipeline = SUB420_ENABLE | SUB422_ENABLE |
+ CBC_ENABLE | CSC_ENABLE |
+ GAM_ENABLES |
+ CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV422P,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC,
+ .dcfg_imode = ISC_DCFG_IMODE_YC422P,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PLANAR,
+ .bits_pipeline = SUB422_ENABLE |
+ CBC_ENABLE | CSC_ENABLE |
+ GAM_ENABLES |
+ CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_GREY,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = CBC_ENABLE | CSC_ENABLE |
+ GAM_ENABLES |
+ CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB444,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB444,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB555,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB555,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_RGB565,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB32,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB32,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED32,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0
+ },
};
#define GAMMA_MAX 2
@@ -617,11 +886,27 @@ static inline bool sensor_is_preferred(const struct isc_format *isc_fmt)
!isc_fmt->isc_support;
}
+static struct fmt_config *get_fmt_config(u32 fourcc)
+{
+ struct fmt_config *config;
+ int i;
+
+ config = &fmt_configs_list[0];
+ for (i = 0; i < ARRAY_SIZE(fmt_configs_list); i++) {
+ if (config->fourcc == fourcc)
+ return config;
+
+ config++;
+ }
+ return NULL;
+}
+
static void isc_start_dma(struct isc_device *isc)
{
struct regmap *regmap = isc->regmap;
struct v4l2_pix_format *pixfmt = &isc->fmt.fmt.pix;
u32 sizeimage = pixfmt->sizeimage;
+ struct fmt_config *config = get_fmt_config(isc->current_fmt->fourcc);
u32 dctrl_dview;
dma_addr_t addr0;
@@ -644,7 +929,7 @@ static void isc_start_dma(struct isc_device *isc)
if (sensor_is_preferred(isc->current_fmt))
dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
else
- dctrl_dview = isc->current_fmt->reg_dctrl_dview;
+ dctrl_dview = config->dctrl_dview;
regmap_write(regmap, ISC_DCTRL, dctrl_dview | ISC_DCTRL_IE_IS);
regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_CAPTURE);
@@ -654,6 +939,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
{
struct regmap *regmap = isc->regmap;
struct isc_ctrls *ctrls = &isc->ctrls;
+ struct fmt_config *config = get_fmt_config(isc->raw_fmt->fourcc);
u32 val, bay_cfg;
const u32 *gamma;
unsigned int i;
@@ -667,7 +953,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
if (!pipeline)
return;
- bay_cfg = isc->raw_fmt->reg_bay_cfg;
+ bay_cfg = config->cfa_baycfg;
regmap_write(regmap, ISC_WB_CFG, bay_cfg);
regmap_write(regmap, ISC_WB_O_RGR, 0x0);
@@ -720,11 +1006,13 @@ static void isc_set_histogram(struct isc_device *isc)
{
struct regmap *regmap = isc->regmap;
struct isc_ctrls *ctrls = &isc->ctrls;
+ struct fmt_config *config = get_fmt_config(isc->raw_fmt->fourcc);
if (ctrls->awb && (ctrls->hist_stat != HIST_ENABLED)) {
- regmap_write(regmap, ISC_HIS_CFG, ISC_HIS_CFG_MODE_R |
- (isc->raw_fmt->reg_bay_cfg << ISC_HIS_CFG_BAYSEL_SHIFT) |
- ISC_HIS_CFG_RAR);
+ regmap_write(regmap, ISC_HIS_CFG,
+ ISC_HIS_CFG_MODE_R |
+ (config->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT) |
+ ISC_HIS_CFG_RAR);
regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_EN);
regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE);
ctrls->hist_id = ISC_HIS_CFG_MODE_R;
@@ -741,8 +1029,10 @@ static void isc_set_histogram(struct isc_device *isc)
}
static inline void isc_get_param(const struct isc_format *fmt,
- u32 *rlp_mode, u32 *dcfg)
+ u32 *rlp_mode, u32 *dcfg)
{
+ struct fmt_config *config = get_fmt_config(fmt->fourcc);
+
*dcfg = ISC_DCFG_YMBSIZE_BEATS8;
switch (fmt->fourcc) {
@@ -754,8 +1044,8 @@ static inline void isc_get_param(const struct isc_format *fmt,
case V4L2_PIX_FMT_SGBRG12:
case V4L2_PIX_FMT_SGRBG12:
case V4L2_PIX_FMT_SRGGB12:
- *rlp_mode = fmt->reg_rlp_mode;
- *dcfg |= fmt->reg_dcfg_imode;
+ *rlp_mode = config->rlp_cfg_mode;
+ *dcfg |= config->dcfg_imode;
break;
default:
*rlp_mode = ISC_RLP_CFG_MODE_DAT8;
@@ -768,20 +1058,22 @@ static int isc_configure(struct isc_device *isc)
{
struct regmap *regmap = isc->regmap;
const struct isc_format *current_fmt = isc->current_fmt;
+ struct fmt_config *curfmt_config = get_fmt_config(current_fmt->fourcc);
+ struct fmt_config *rawfmt_config = get_fmt_config(isc->raw_fmt->fourcc);
struct isc_subdev_entity *subdev = isc->current_subdev;
u32 pfe_cfg0, rlp_mode, dcfg, mask, pipeline;
if (sensor_is_preferred(current_fmt)) {
- pfe_cfg0 = current_fmt->reg_bps;
+ pfe_cfg0 = curfmt_config->pfe_cfg0_bps;
pipeline = 0x0;
isc_get_param(current_fmt, &rlp_mode, &dcfg);
isc->ctrls.hist_stat = HIST_INIT;
} else {
- pfe_cfg0 = isc->raw_fmt->reg_bps;
- pipeline = current_fmt->pipeline;
- rlp_mode = current_fmt->reg_rlp_mode;
- dcfg = current_fmt->reg_dcfg_imode | ISC_DCFG_YMBSIZE_BEATS8 |
- ISC_DCFG_CMBSIZE_BEATS8;
+ pfe_cfg0 = rawfmt_config->pfe_cfg0_bps;
+ pipeline = curfmt_config->bits_pipeline;
+ rlp_mode = curfmt_config->rlp_cfg_mode;
+ dcfg = curfmt_config->dcfg_imode |
+ ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
}
pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
@@ -1366,6 +1658,7 @@ static void isc_awb_work(struct work_struct *w)
struct isc_device *isc =
container_of(w, struct isc_device, awb_work);
struct regmap *regmap = isc->regmap;
+ struct fmt_config *config = get_fmt_config(isc->raw_fmt->fourcc);
struct isc_ctrls *ctrls = &isc->ctrls;
u32 hist_id = ctrls->hist_id;
u32 baysel;
@@ -1383,7 +1676,7 @@ static void isc_awb_work(struct work_struct *w)
}
ctrls->hist_id = hist_id;
- baysel = isc->raw_fmt->reg_bay_cfg << ISC_HIS_CFG_BAYSEL_SHIFT;
+ baysel = config->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
pm_runtime_get_sync(isc->dev);
@@ -1484,10 +1777,10 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
static struct isc_format *find_format_by_code(unsigned int code, int *index)
{
- struct isc_format *fmt = &isc_formats[0];
+ struct isc_format *fmt = &formats_list[0];
unsigned int i;
- for (i = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
if (fmt->mbus_code == code) {
*index = i;
return fmt;
@@ -1504,37 +1797,36 @@ static int isc_formats_init(struct isc_device *isc)
struct isc_format *fmt;
struct v4l2_subdev *subdev = isc->current_subdev->sd;
unsigned int num_fmts, i, j;
+ u32 list_size = ARRAY_SIZE(formats_list);
struct v4l2_subdev_mbus_code_enum mbus_code = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
};
- fmt = &isc_formats[0];
- for (i = 0; i < ARRAY_SIZE(isc_formats); i++) {
- fmt->isc_support = false;
- fmt->sd_support = false;
-
- fmt++;
- }
-
while (!v4l2_subdev_call(subdev, pad, enum_mbus_code,
NULL, &mbus_code)) {
mbus_code.index++;
+
fmt = find_format_by_code(mbus_code.code, &i);
- if (!fmt)
+ if ((!fmt) || (!(fmt->flags & FMT_FLAG_FROM_SENSOR)))
continue;
fmt->sd_support = true;
- if (i <= RAW_FMT_IND_END) {
- for (j = ISC_FMT_IND_START; j <= ISC_FMT_IND_END; j++)
- isc_formats[j].isc_support = true;
-
+ if (fmt->flags & FMT_FLAG_RAW_FORMAT)
isc->raw_fmt = fmt;
- }
}
- fmt = &isc_formats[0];
- for (i = 0, num_fmts = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ fmt = &formats_list[0];
+ for (i = 0; i < list_size; i++) {
+ if (fmt->flags & FMT_FLAG_FROM_CONTROLLER)
+ fmt->isc_support = true;
+
+ fmt++;
+ }
+
+ fmt = &formats_list[0];
+ num_fmts = 0;
+ for (i = 0; i < list_size; i++) {
if (fmt->isc_support || fmt->sd_support)
num_fmts++;
@@ -1551,8 +1843,8 @@ static int isc_formats_init(struct isc_device *isc)
if (!isc->user_formats)
return -ENOMEM;
- fmt = &isc_formats[0];
- for (i = 0, j = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ fmt = &formats_list[0];
+ for (i = 0, j = 0; i < list_size; i++) {
if (fmt->isc_support || fmt->sd_support)
isc->user_formats[j++] = fmt;
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v3 5/5] media: atmel-isc: Rework the format list
@ 2017-09-28 8:18 ` Wenyou Yang
0 siblings, 0 replies; 20+ messages in thread
From: Wenyou Yang @ 2017-09-28 8:18 UTC (permalink / raw)
To: linux-arm-kernel
To improve the readability of code, split the format array into two,
one for the format description, other for the register configuration.
Meanwhile, add the flag member to indicate the format can be achieved
from the sensor or be produced by the controller, and rename members
related to the register configuration.
Also add more formats support: GREY, ARGB444, ARGB555 and ARGB32.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
---
Changes in v3:
- Add a new flag for Raw Bayer format to remove MAX_RAW_FMT_INDEX define.
- Add the comments for define of the format flag.
- Rebase media_tree/master.
Changes in v2:
- Add the new patch to remove the unnecessary member from
isc_subdev_entity struct.
- Rebase on the patch set,
[PATCH 0/6] [media] Atmel: Adjustments for seven function implementations
https://www.mail-archive.com/linux-media at vger.kernel.org/msg118342.html
drivers/media/platform/atmel/atmel-isc.c | 530 ++++++++++++++++++++++++-------
1 file changed, 411 insertions(+), 119 deletions(-)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 0ff9dfbfff70..d2f8c05ad0ce 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -89,34 +89,63 @@ struct isc_subdev_entity {
struct list_head list;
};
+/* Indicate the format is generated by the sensor */
+#define FMT_FLAG_FROM_SENSOR BIT(0)
+/* Indicate the format is produced by ISC itself */
+#define FMT_FLAG_FROM_CONTROLLER BIT(1)
+/* Indicate a Raw Bayer format */
+#define FMT_FLAG_RAW_FORMAT BIT(2)
+
+#define FMT_FLAG_RAW_FROM_SENSOR (FMT_FLAG_FROM_SENSOR | \
+ FMT_FLAG_RAW_FORMAT)
+
/*
* struct isc_format - ISC media bus format information
* @fourcc: Fourcc code for this format
* @mbus_code: V4L2 media bus format code.
+ * flags: Indicate format from sensor or converted by controller
* @bpp: Bits per pixel (when stored in memory)
- * @reg_bps: reg value for bits per sample
* (when transferred over a bus)
- * @pipeline: pipeline switch
* @sd_support: Subdev supports this format
* @isc_support: ISC can convert raw format to this format
*/
+
struct isc_format {
u32 fourcc;
u32 mbus_code;
+ u32 flags;
u8 bpp;
- u32 reg_bps;
- u32 reg_bay_cfg;
- u32 reg_rlp_mode;
- u32 reg_dcfg_imode;
- u32 reg_dctrl_dview;
-
- u32 pipeline;
-
bool sd_support;
bool isc_support;
};
+/* Pipeline bitmap */
+#define WB_ENABLE BIT(0)
+#define CFA_ENABLE BIT(1)
+#define CC_ENABLE BIT(2)
+#define GAM_ENABLE BIT(3)
+#define GAM_BENABLE BIT(4)
+#define GAM_GENABLE BIT(5)
+#define GAM_RENABLE BIT(6)
+#define CSC_ENABLE BIT(7)
+#define CBC_ENABLE BIT(8)
+#define SUB422_ENABLE BIT(9)
+#define SUB420_ENABLE BIT(10)
+
+#define GAM_ENABLES (GAM_RENABLE | GAM_GENABLE | GAM_BENABLE | GAM_ENABLE)
+
+struct fmt_config {
+ u32 fourcc;
+
+ u32 pfe_cfg0_bps;
+ u32 cfa_baycfg;
+ u32 rlp_cfg_mode;
+ u32 dcfg_imode;
+ u32 dctrl_dview;
+
+ u32 bits_pipeline;
+};
#define HIST_ENTRIES 512
#define HIST_BAYER (ISC_HIS_CFG_MODE_B + 1)
@@ -181,80 +210,320 @@ struct isc_device {
struct list_head subdev_entities;
};
-#define RAW_FMT_IND_START 0
-#define RAW_FMT_IND_END 11
-#define ISC_FMT_IND_START 12
-#define ISC_FMT_IND_END 14
-
-static struct isc_format isc_formats[] = {
- { V4L2_PIX_FMT_SBGGR8, MEDIA_BUS_FMT_SBGGR8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGBRG8, MEDIA_BUS_FMT_SGBRG8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGRBG8, MEDIA_BUS_FMT_SGRBG8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SRGGB8, MEDIA_BUS_FMT_SRGGB8_1X8, 8,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
-
- { V4L2_PIX_FMT_SBGGR10, MEDIA_BUS_FMT_SBGGR10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGBRG10, MEDIA_BUS_FMT_SGBRG10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGRBG10, MEDIA_BUS_FMT_SGRBG10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SRGGB10, MEDIA_BUS_FMT_SRGGB10_1X10, 16,
- ISC_PFG_CFG0_BPS_TEN, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT10,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
-
- { V4L2_PIX_FMT_SBGGR12, MEDIA_BUS_FMT_SBGGR12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGBRG12, MEDIA_BUS_FMT_SGBRG12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_GBGB, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SGRBG12, MEDIA_BUS_FMT_SGRBG12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_GRGR, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
- { V4L2_PIX_FMT_SRGGB12, MEDIA_BUS_FMT_SRGGB12_1X12, 16,
- ISC_PFG_CFG0_BPS_TWELVE, ISC_BAY_CFG_RGRG, ISC_RLP_CFG_MODE_DAT12,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
-
- { V4L2_PIX_FMT_YUV420, 0x0, 12,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
- ISC_DCFG_IMODE_YC420P, ISC_DCTRL_DVIEW_PLANAR, 0x7fb,
- false, false },
- { V4L2_PIX_FMT_YUV422P, 0x0, 16,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_YYCC,
- ISC_DCFG_IMODE_YC422P, ISC_DCTRL_DVIEW_PLANAR, 0x3fb,
- false, false },
- { V4L2_PIX_FMT_RGB565, MEDIA_BUS_FMT_RGB565_2X8_LE, 16,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_RGB565,
- ISC_DCFG_IMODE_PACKED16, ISC_DCTRL_DVIEW_PACKED, 0x7b,
- false, false },
-
- { V4L2_PIX_FMT_YUYV, MEDIA_BUS_FMT_YUYV8_2X8, 16,
- ISC_PFE_CFG0_BPS_EIGHT, ISC_BAY_CFG_BGBG, ISC_RLP_CFG_MODE_DAT8,
- ISC_DCFG_IMODE_PACKED8, ISC_DCTRL_DVIEW_PACKED, 0x0,
- false, false },
+static struct isc_format formats_list[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR10,
+ .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG10,
+ .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG10,
+ .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB10,
+ .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR12,
+ .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG12,
+ .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG12,
+ .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB12,
+ .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12,
+ .flags = FMT_FLAG_RAW_FROM_SENSOR,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV420,
+ .mbus_code = 0x0,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 12,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV422P,
+ .mbus_code = 0x0,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_GREY,
+ .mbus_code = MEDIA_BUS_FMT_Y8_1X8,
+ .flags = FMT_FLAG_FROM_CONTROLLER |
+ FMT_FLAG_FROM_SENSOR,
+ .bpp = 8,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB444,
+ .mbus_code = MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB555,
+ .mbus_code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 16,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB32,
+ .mbus_code = MEDIA_BUS_FMT_ARGB8888_1X32,
+ .flags = FMT_FLAG_FROM_CONTROLLER,
+ .bpp = 32,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .flags = FMT_FLAG_FROM_CONTROLLER |
+ FMT_FLAG_FROM_SENSOR,
+ .bpp = 16,
+ },
+};
+
+struct fmt_config fmt_configs_list[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_GBGB,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_GRGR,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_RGRG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_GBGB,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_GRGR,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB10,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+ .cfa_baycfg = ISC_BAY_CFG_RGRG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SBGGR12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGBRG12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_GBGB,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SGRBG12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_GRGR,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_SRGGB12,
+ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+ .cfa_baycfg = ISC_BAY_CFG_RGRG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV420,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC,
+ .dcfg_imode = ISC_DCFG_IMODE_YC420P,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PLANAR,
+ .bits_pipeline = SUB420_ENABLE | SUB422_ENABLE |
+ CBC_ENABLE | CSC_ENABLE |
+ GAM_ENABLES |
+ CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUV422P,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC,
+ .dcfg_imode = ISC_DCFG_IMODE_YC422P,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PLANAR,
+ .bits_pipeline = SUB422_ENABLE |
+ CBC_ENABLE | CSC_ENABLE |
+ GAM_ENABLES |
+ CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_GREY,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = CBC_ENABLE | CSC_ENABLE |
+ GAM_ENABLES |
+ CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB444,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB444,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB555,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB555,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_RGB565,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED16,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_ARGB32,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB32,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED32,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = GAM_ENABLES | CFA_ENABLE | WB_ENABLE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+ .cfa_baycfg = ISC_BAY_CFG_BGBG,
+ .rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8,
+ .dcfg_imode = ISC_DCFG_IMODE_PACKED8,
+ .dctrl_dview = ISC_DCTRL_DVIEW_PACKED,
+ .bits_pipeline = 0x0
+ },
};
#define GAMMA_MAX 2
@@ -617,11 +886,27 @@ static inline bool sensor_is_preferred(const struct isc_format *isc_fmt)
!isc_fmt->isc_support;
}
+static struct fmt_config *get_fmt_config(u32 fourcc)
+{
+ struct fmt_config *config;
+ int i;
+
+ config = &fmt_configs_list[0];
+ for (i = 0; i < ARRAY_SIZE(fmt_configs_list); i++) {
+ if (config->fourcc == fourcc)
+ return config;
+
+ config++;
+ }
+ return NULL;
+}
+
static void isc_start_dma(struct isc_device *isc)
{
struct regmap *regmap = isc->regmap;
struct v4l2_pix_format *pixfmt = &isc->fmt.fmt.pix;
u32 sizeimage = pixfmt->sizeimage;
+ struct fmt_config *config = get_fmt_config(isc->current_fmt->fourcc);
u32 dctrl_dview;
dma_addr_t addr0;
@@ -644,7 +929,7 @@ static void isc_start_dma(struct isc_device *isc)
if (sensor_is_preferred(isc->current_fmt))
dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
else
- dctrl_dview = isc->current_fmt->reg_dctrl_dview;
+ dctrl_dview = config->dctrl_dview;
regmap_write(regmap, ISC_DCTRL, dctrl_dview | ISC_DCTRL_IE_IS);
regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_CAPTURE);
@@ -654,6 +939,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
{
struct regmap *regmap = isc->regmap;
struct isc_ctrls *ctrls = &isc->ctrls;
+ struct fmt_config *config = get_fmt_config(isc->raw_fmt->fourcc);
u32 val, bay_cfg;
const u32 *gamma;
unsigned int i;
@@ -667,7 +953,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
if (!pipeline)
return;
- bay_cfg = isc->raw_fmt->reg_bay_cfg;
+ bay_cfg = config->cfa_baycfg;
regmap_write(regmap, ISC_WB_CFG, bay_cfg);
regmap_write(regmap, ISC_WB_O_RGR, 0x0);
@@ -720,11 +1006,13 @@ static void isc_set_histogram(struct isc_device *isc)
{
struct regmap *regmap = isc->regmap;
struct isc_ctrls *ctrls = &isc->ctrls;
+ struct fmt_config *config = get_fmt_config(isc->raw_fmt->fourcc);
if (ctrls->awb && (ctrls->hist_stat != HIST_ENABLED)) {
- regmap_write(regmap, ISC_HIS_CFG, ISC_HIS_CFG_MODE_R |
- (isc->raw_fmt->reg_bay_cfg << ISC_HIS_CFG_BAYSEL_SHIFT) |
- ISC_HIS_CFG_RAR);
+ regmap_write(regmap, ISC_HIS_CFG,
+ ISC_HIS_CFG_MODE_R |
+ (config->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT) |
+ ISC_HIS_CFG_RAR);
regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_EN);
regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE);
ctrls->hist_id = ISC_HIS_CFG_MODE_R;
@@ -741,8 +1029,10 @@ static void isc_set_histogram(struct isc_device *isc)
}
static inline void isc_get_param(const struct isc_format *fmt,
- u32 *rlp_mode, u32 *dcfg)
+ u32 *rlp_mode, u32 *dcfg)
{
+ struct fmt_config *config = get_fmt_config(fmt->fourcc);
+
*dcfg = ISC_DCFG_YMBSIZE_BEATS8;
switch (fmt->fourcc) {
@@ -754,8 +1044,8 @@ static inline void isc_get_param(const struct isc_format *fmt,
case V4L2_PIX_FMT_SGBRG12:
case V4L2_PIX_FMT_SGRBG12:
case V4L2_PIX_FMT_SRGGB12:
- *rlp_mode = fmt->reg_rlp_mode;
- *dcfg |= fmt->reg_dcfg_imode;
+ *rlp_mode = config->rlp_cfg_mode;
+ *dcfg |= config->dcfg_imode;
break;
default:
*rlp_mode = ISC_RLP_CFG_MODE_DAT8;
@@ -768,20 +1058,22 @@ static int isc_configure(struct isc_device *isc)
{
struct regmap *regmap = isc->regmap;
const struct isc_format *current_fmt = isc->current_fmt;
+ struct fmt_config *curfmt_config = get_fmt_config(current_fmt->fourcc);
+ struct fmt_config *rawfmt_config = get_fmt_config(isc->raw_fmt->fourcc);
struct isc_subdev_entity *subdev = isc->current_subdev;
u32 pfe_cfg0, rlp_mode, dcfg, mask, pipeline;
if (sensor_is_preferred(current_fmt)) {
- pfe_cfg0 = current_fmt->reg_bps;
+ pfe_cfg0 = curfmt_config->pfe_cfg0_bps;
pipeline = 0x0;
isc_get_param(current_fmt, &rlp_mode, &dcfg);
isc->ctrls.hist_stat = HIST_INIT;
} else {
- pfe_cfg0 = isc->raw_fmt->reg_bps;
- pipeline = current_fmt->pipeline;
- rlp_mode = current_fmt->reg_rlp_mode;
- dcfg = current_fmt->reg_dcfg_imode | ISC_DCFG_YMBSIZE_BEATS8 |
- ISC_DCFG_CMBSIZE_BEATS8;
+ pfe_cfg0 = rawfmt_config->pfe_cfg0_bps;
+ pipeline = curfmt_config->bits_pipeline;
+ rlp_mode = curfmt_config->rlp_cfg_mode;
+ dcfg = curfmt_config->dcfg_imode |
+ ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
}
pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
@@ -1366,6 +1658,7 @@ static void isc_awb_work(struct work_struct *w)
struct isc_device *isc =
container_of(w, struct isc_device, awb_work);
struct regmap *regmap = isc->regmap;
+ struct fmt_config *config = get_fmt_config(isc->raw_fmt->fourcc);
struct isc_ctrls *ctrls = &isc->ctrls;
u32 hist_id = ctrls->hist_id;
u32 baysel;
@@ -1383,7 +1676,7 @@ static void isc_awb_work(struct work_struct *w)
}
ctrls->hist_id = hist_id;
- baysel = isc->raw_fmt->reg_bay_cfg << ISC_HIS_CFG_BAYSEL_SHIFT;
+ baysel = config->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
pm_runtime_get_sync(isc->dev);
@@ -1484,10 +1777,10 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
static struct isc_format *find_format_by_code(unsigned int code, int *index)
{
- struct isc_format *fmt = &isc_formats[0];
+ struct isc_format *fmt = &formats_list[0];
unsigned int i;
- for (i = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
if (fmt->mbus_code == code) {
*index = i;
return fmt;
@@ -1504,37 +1797,36 @@ static int isc_formats_init(struct isc_device *isc)
struct isc_format *fmt;
struct v4l2_subdev *subdev = isc->current_subdev->sd;
unsigned int num_fmts, i, j;
+ u32 list_size = ARRAY_SIZE(formats_list);
struct v4l2_subdev_mbus_code_enum mbus_code = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
};
- fmt = &isc_formats[0];
- for (i = 0; i < ARRAY_SIZE(isc_formats); i++) {
- fmt->isc_support = false;
- fmt->sd_support = false;
-
- fmt++;
- }
-
while (!v4l2_subdev_call(subdev, pad, enum_mbus_code,
NULL, &mbus_code)) {
mbus_code.index++;
+
fmt = find_format_by_code(mbus_code.code, &i);
- if (!fmt)
+ if ((!fmt) || (!(fmt->flags & FMT_FLAG_FROM_SENSOR)))
continue;
fmt->sd_support = true;
- if (i <= RAW_FMT_IND_END) {
- for (j = ISC_FMT_IND_START; j <= ISC_FMT_IND_END; j++)
- isc_formats[j].isc_support = true;
-
+ if (fmt->flags & FMT_FLAG_RAW_FORMAT)
isc->raw_fmt = fmt;
- }
}
- fmt = &isc_formats[0];
- for (i = 0, num_fmts = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ fmt = &formats_list[0];
+ for (i = 0; i < list_size; i++) {
+ if (fmt->flags & FMT_FLAG_FROM_CONTROLLER)
+ fmt->isc_support = true;
+
+ fmt++;
+ }
+
+ fmt = &formats_list[0];
+ num_fmts = 0;
+ for (i = 0; i < list_size; i++) {
if (fmt->isc_support || fmt->sd_support)
num_fmts++;
@@ -1551,8 +1843,8 @@ static int isc_formats_init(struct isc_device *isc)
if (!isc->user_formats)
return -ENOMEM;
- fmt = &isc_formats[0];
- for (i = 0, j = 0; i < ARRAY_SIZE(isc_formats); i++) {
+ fmt = &formats_list[0];
+ for (i = 0, j = 0; i < list_size; i++) {
if (fmt->isc_support || fmt->sd_support)
isc->user_formats[j++] = fmt;
--
2.13.0
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
2017-09-28 8:18 ` Wenyou Yang
@ 2017-09-28 21:25 ` Sakari Ailus
-1 siblings, 0 replies; 20+ messages in thread
From: Sakari Ailus @ 2017-09-28 21:25 UTC (permalink / raw)
To: Wenyou Yang
Cc: Mauro Carvalho Chehab, linux-kernel, Nicolas Ferre,
Jonathan Corbet, Hans Verkuil, linux-arm-kernel,
Linux Media Mailing List
Hi Wenyou,
On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
> To meet the relationship, enable the HCLOCK and ispck during the
> device probe, "isc_pck frequency is less than or equal to isc_ispck,
> and isc_ispck is greater than or equal to HCLOCK."
> Meanwhile, call the pm_runtime_enable() in the right place.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
> 1 file changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
> index 0b15dc1a3a0b..f092c95587c1 100644
> --- a/drivers/media/platform/atmel/atmel-isc.c
> +++ b/drivers/media/platform/atmel/atmel-isc.c
> @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> struct isc_subdev_entity *sd_entity;
> struct video_device *vdev = &isc->video_dev;
> struct vb2_queue *q = &isc->vb2_vidq;
> + struct device *dev = isc->dev;
> int ret;
>
> ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
> @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> return ret;
> }
>
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + pm_request_idle(dev);
Remember that the driver's async complete function could never get called.
What would be the reason to move it here?
> +
> return 0;
> }
>
> @@ -1856,25 +1861,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = clk_prepare_enable(isc->hclock);
> + if (ret) {
> + dev_err(dev, "failed to enable hclock: %d\n", ret);
> + return ret;
> + }
> +
> ret = isc_clk_init(isc);
> if (ret) {
> dev_err(dev, "failed to init isc clock: %d\n", ret);
> - goto clean_isc_clk;
> + goto unprepare_hclk;
> }
>
> isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
>
> + ret = clk_prepare_enable(isc->ispck);
> + if (ret) {
> + dev_err(dev, "failed to enable ispck: %d\n", ret);
> + goto unprepare_hclk;
> + }
> +
> /* ispck should be greater or equal to hclock */
> ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
> if (ret) {
> dev_err(dev, "failed to set ispck rate: %d\n", ret);
> - goto clean_isc_clk;
> + goto unprepare_clk;
> }
>
> ret = v4l2_device_register(dev, &isc->v4l2_dev);
> if (ret) {
> dev_err(dev, "unable to register v4l2 device.\n");
> - goto clean_isc_clk;
> + goto unprepare_clk;
> }
>
> ret = isc_parse_dt(dev, isc);
> @@ -1907,8 +1924,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
> break;
> }
>
> - pm_runtime_enable(dev);
> -
> return 0;
>
> cleanup_subdev:
> @@ -1917,7 +1932,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
> unregister_v4l2_device:
> v4l2_device_unregister(&isc->v4l2_dev);
>
> -clean_isc_clk:
> +unprepare_clk:
> + clk_disable_unprepare(isc->ispck);
> +unprepare_hclk:
> + clk_disable_unprepare(isc->hclock);
I think you're missing clk_disable_unprepare() in the driver's remove
callback.
> +
> isc_clk_cleanup(isc);
>
> return ret;
--
Regards,
Sakari Ailus
e-mail: sakari.ailus@iki.fi
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
@ 2017-09-28 21:25 ` Sakari Ailus
0 siblings, 0 replies; 20+ messages in thread
From: Sakari Ailus @ 2017-09-28 21:25 UTC (permalink / raw)
To: linux-arm-kernel
Hi Wenyou,
On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
> To meet the relationship, enable the HCLOCK and ispck during the
> device probe, "isc_pck frequency is less than or equal to isc_ispck,
> and isc_ispck is greater than or equal to HCLOCK."
> Meanwhile, call the pm_runtime_enable() in the right place.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
> 1 file changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
> index 0b15dc1a3a0b..f092c95587c1 100644
> --- a/drivers/media/platform/atmel/atmel-isc.c
> +++ b/drivers/media/platform/atmel/atmel-isc.c
> @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> struct isc_subdev_entity *sd_entity;
> struct video_device *vdev = &isc->video_dev;
> struct vb2_queue *q = &isc->vb2_vidq;
> + struct device *dev = isc->dev;
> int ret;
>
> ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
> @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> return ret;
> }
>
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + pm_request_idle(dev);
Remember that the driver's async complete function could never get called.
What would be the reason to move it here?
> +
> return 0;
> }
>
> @@ -1856,25 +1861,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = clk_prepare_enable(isc->hclock);
> + if (ret) {
> + dev_err(dev, "failed to enable hclock: %d\n", ret);
> + return ret;
> + }
> +
> ret = isc_clk_init(isc);
> if (ret) {
> dev_err(dev, "failed to init isc clock: %d\n", ret);
> - goto clean_isc_clk;
> + goto unprepare_hclk;
> }
>
> isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
>
> + ret = clk_prepare_enable(isc->ispck);
> + if (ret) {
> + dev_err(dev, "failed to enable ispck: %d\n", ret);
> + goto unprepare_hclk;
> + }
> +
> /* ispck should be greater or equal to hclock */
> ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
> if (ret) {
> dev_err(dev, "failed to set ispck rate: %d\n", ret);
> - goto clean_isc_clk;
> + goto unprepare_clk;
> }
>
> ret = v4l2_device_register(dev, &isc->v4l2_dev);
> if (ret) {
> dev_err(dev, "unable to register v4l2 device.\n");
> - goto clean_isc_clk;
> + goto unprepare_clk;
> }
>
> ret = isc_parse_dt(dev, isc);
> @@ -1907,8 +1924,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
> break;
> }
>
> - pm_runtime_enable(dev);
> -
> return 0;
>
> cleanup_subdev:
> @@ -1917,7 +1932,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
> unregister_v4l2_device:
> v4l2_device_unregister(&isc->v4l2_dev);
>
> -clean_isc_clk:
> +unprepare_clk:
> + clk_disable_unprepare(isc->ispck);
> +unprepare_hclk:
> + clk_disable_unprepare(isc->hclock);
I think you're missing clk_disable_unprepare() in the driver's remove
callback.
> +
> isc_clk_cleanup(isc);
>
> return ret;
--
Regards,
Sakari Ailus
e-mail: sakari.ailus at iki.fi
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
2017-09-28 21:25 ` Sakari Ailus
@ 2017-10-09 5:49 ` Yang, Wenyou
-1 siblings, 0 replies; 20+ messages in thread
From: Yang, Wenyou @ 2017-10-09 5:49 UTC (permalink / raw)
To: Sakari Ailus
Cc: Hans Verkuil, Jonathan Corbet, linux-kernel,
Mauro Carvalho Chehab, linux-arm-kernel,
Linux Media Mailing List
Hi Sakari,
Sorry for late answer, because I was in vacation last week.
On 2017/9/29 5:25, Sakari Ailus wrote:
> Hi Wenyou,
>
> On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
>> To meet the relationship, enable the HCLOCK and ispck during the
>> device probe, "isc_pck frequency is less than or equal to isc_ispck,
>> and isc_ispck is greater than or equal to HCLOCK."
>> Meanwhile, call the pm_runtime_enable() in the right place.
>>
>> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
>> ---
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>> drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
>> 1 file changed, 25 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
>> index 0b15dc1a3a0b..f092c95587c1 100644
>> --- a/drivers/media/platform/atmel/atmel-isc.c
>> +++ b/drivers/media/platform/atmel/atmel-isc.c
>> @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>> struct isc_subdev_entity *sd_entity;
>> struct video_device *vdev = &isc->video_dev;
>> struct vb2_queue *q = &isc->vb2_vidq;
>> + struct device *dev = isc->dev;
>> int ret;
>>
>> ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
>> @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>> return ret;
>> }
>>
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> + pm_request_idle(dev);
> Remember that the driver's async complete function could never get called.
>
> What would be the reason to move it here?
The ISC provides the clock for the sensor, namely, it is the clock
provider for the external sensor.
So it keeps active to make the sensor probe successfully.
Otherwise, the sensor, such as 0v7670 fails to probe due to the failure
to clk_enable().
>
>> +
>> return 0;
>> }
>>
>> @@ -1856,25 +1861,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
>> return ret;
>> }
>>
>> + ret = clk_prepare_enable(isc->hclock);
>> + if (ret) {
>> + dev_err(dev, "failed to enable hclock: %d\n", ret);
>> + return ret;
>> + }
>> +
>> ret = isc_clk_init(isc);
>> if (ret) {
>> dev_err(dev, "failed to init isc clock: %d\n", ret);
>> - goto clean_isc_clk;
>> + goto unprepare_hclk;
>> }
>>
>> isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
>>
>> + ret = clk_prepare_enable(isc->ispck);
>> + if (ret) {
>> + dev_err(dev, "failed to enable ispck: %d\n", ret);
>> + goto unprepare_hclk;
>> + }
>> +
>> /* ispck should be greater or equal to hclock */
>> ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
>> if (ret) {
>> dev_err(dev, "failed to set ispck rate: %d\n", ret);
>> - goto clean_isc_clk;
>> + goto unprepare_clk;
>> }
>>
>> ret = v4l2_device_register(dev, &isc->v4l2_dev);
>> if (ret) {
>> dev_err(dev, "unable to register v4l2 device.\n");
>> - goto clean_isc_clk;
>> + goto unprepare_clk;
>> }
>>
>> ret = isc_parse_dt(dev, isc);
>> @@ -1907,8 +1924,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
>> break;
>> }
>>
>> - pm_runtime_enable(dev);
>> -
>> return 0;
>>
>> cleanup_subdev:
>> @@ -1917,7 +1932,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
>> unregister_v4l2_device:
>> v4l2_device_unregister(&isc->v4l2_dev);
>>
>> -clean_isc_clk:
>> +unprepare_clk:
>> + clk_disable_unprepare(isc->ispck);
>> +unprepare_hclk:
>> + clk_disable_unprepare(isc->hclock);
> I think you're missing clk_disable_unprepare() in the driver's remove
> callback.
Will add in next version.
>
>> +
>> isc_clk_cleanup(isc);
>>
>> return ret;
Best Regards,
Wenyou Yang
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
@ 2017-10-09 5:49 ` Yang, Wenyou
0 siblings, 0 replies; 20+ messages in thread
From: Yang, Wenyou @ 2017-10-09 5:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sakari,
Sorry for late answer, because I was in vacation last week.
On 2017/9/29 5:25, Sakari Ailus wrote:
> Hi Wenyou,
>
> On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
>> To meet the relationship, enable the HCLOCK and ispck during the
>> device probe, "isc_pck frequency is less than or equal to isc_ispck,
>> and isc_ispck is greater than or equal to HCLOCK."
>> Meanwhile, call the pm_runtime_enable() in the right place.
>>
>> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
>> ---
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>> drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
>> 1 file changed, 25 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
>> index 0b15dc1a3a0b..f092c95587c1 100644
>> --- a/drivers/media/platform/atmel/atmel-isc.c
>> +++ b/drivers/media/platform/atmel/atmel-isc.c
>> @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>> struct isc_subdev_entity *sd_entity;
>> struct video_device *vdev = &isc->video_dev;
>> struct vb2_queue *q = &isc->vb2_vidq;
>> + struct device *dev = isc->dev;
>> int ret;
>>
>> ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
>> @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>> return ret;
>> }
>>
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> + pm_request_idle(dev);
> Remember that the driver's async complete function could never get called.
>
> What would be the reason to move it here?
The ISC provides the clock for the sensor, namely, it is the clock
provider for the external sensor.
So it keeps active to make the sensor probe successfully.
Otherwise, the sensor, such as 0v7670 fails to probe due to the failure
to clk_enable().
>
>> +
>> return 0;
>> }
>>
>> @@ -1856,25 +1861,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
>> return ret;
>> }
>>
>> + ret = clk_prepare_enable(isc->hclock);
>> + if (ret) {
>> + dev_err(dev, "failed to enable hclock: %d\n", ret);
>> + return ret;
>> + }
>> +
>> ret = isc_clk_init(isc);
>> if (ret) {
>> dev_err(dev, "failed to init isc clock: %d\n", ret);
>> - goto clean_isc_clk;
>> + goto unprepare_hclk;
>> }
>>
>> isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
>>
>> + ret = clk_prepare_enable(isc->ispck);
>> + if (ret) {
>> + dev_err(dev, "failed to enable ispck: %d\n", ret);
>> + goto unprepare_hclk;
>> + }
>> +
>> /* ispck should be greater or equal to hclock */
>> ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
>> if (ret) {
>> dev_err(dev, "failed to set ispck rate: %d\n", ret);
>> - goto clean_isc_clk;
>> + goto unprepare_clk;
>> }
>>
>> ret = v4l2_device_register(dev, &isc->v4l2_dev);
>> if (ret) {
>> dev_err(dev, "unable to register v4l2 device.\n");
>> - goto clean_isc_clk;
>> + goto unprepare_clk;
>> }
>>
>> ret = isc_parse_dt(dev, isc);
>> @@ -1907,8 +1924,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
>> break;
>> }
>>
>> - pm_runtime_enable(dev);
>> -
>> return 0;
>>
>> cleanup_subdev:
>> @@ -1917,7 +1932,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
>> unregister_v4l2_device:
>> v4l2_device_unregister(&isc->v4l2_dev);
>>
>> -clean_isc_clk:
>> +unprepare_clk:
>> + clk_disable_unprepare(isc->ispck);
>> +unprepare_hclk:
>> + clk_disable_unprepare(isc->hclock);
> I think you're missing clk_disable_unprepare() in the driver's remove
> callback.
Will add in next version.
>
>> +
>> isc_clk_cleanup(isc);
>>
>> return ret;
Best Regards,
Wenyou Yang
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
2017-10-09 5:49 ` Yang, Wenyou
@ 2017-10-09 7:58 ` Sakari Ailus
-1 siblings, 0 replies; 20+ messages in thread
From: Sakari Ailus @ 2017-10-09 7:58 UTC (permalink / raw)
To: Yang, Wenyou
Cc: Hans Verkuil, Jonathan Corbet, linux-kernel,
Mauro Carvalho Chehab, linux-arm-kernel,
Linux Media Mailing List
Hi
Wenyou,
On Mon, Oct 09, 2017 at 01:49:44PM +0800, Yang, Wenyou wrote:
> Hi Sakari,
>
> Sorry for late answer, because I was in vacation last week.
>
> On 2017/9/29 5:25, Sakari Ailus wrote:
> > Hi Wenyou,
> >
> > On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
> > > To meet the relationship, enable the HCLOCK and ispck during the
> > > device probe, "isc_pck frequency is less than or equal to isc_ispck,
> > > and isc_ispck is greater than or equal to HCLOCK."
> > > Meanwhile, call the pm_runtime_enable() in the right place.
> > >
> > > Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> > > ---
> > >
> > > Changes in v3: None
> > > Changes in v2: None
> > >
> > > drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
> > > 1 file changed, 25 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
> > > index 0b15dc1a3a0b..f092c95587c1 100644
> > > --- a/drivers/media/platform/atmel/atmel-isc.c
> > > +++ b/drivers/media/platform/atmel/atmel-isc.c
> > > @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> > > struct isc_subdev_entity *sd_entity;
> > > struct video_device *vdev = &isc->video_dev;
> > > struct vb2_queue *q = &isc->vb2_vidq;
> > > + struct device *dev = isc->dev;
> > > int ret;
> > > ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
> > > @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> > > return ret;
> > > }
> > > + pm_runtime_set_active(dev);
> > > + pm_runtime_enable(dev);
> > > + pm_request_idle(dev);
> > Remember that the driver's async complete function could never get called.
> >
> > What would be the reason to move it here?
> The ISC provides the clock for the sensor, namely, it is the clock provider
> for the external sensor.
> So it keeps active to make the sensor probe successfully.
> Otherwise, the sensor, such as 0v7670 fails to probe due to the failure to
> clk_enable().
You'll still need to balance the get and put calls.
complete callback is not necessarily called at all or could be called
multiple times. Instead, you should probably do pm_runtime_get_sync() when
the clock is enabled and put when it's disabled.
--
Sakari Ailus
e-mail: sakari.ailus@iki.fi
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
@ 2017-10-09 7:58 ` Sakari Ailus
0 siblings, 0 replies; 20+ messages in thread
From: Sakari Ailus @ 2017-10-09 7:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi
Wenyou,
On Mon, Oct 09, 2017 at 01:49:44PM +0800, Yang, Wenyou wrote:
> Hi Sakari,
>
> Sorry for late answer, because I was in vacation last week.
>
> On 2017/9/29 5:25, Sakari Ailus wrote:
> > Hi Wenyou,
> >
> > On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
> > > To meet the relationship, enable the HCLOCK and ispck during the
> > > device probe, "isc_pck frequency is less than or equal to isc_ispck,
> > > and isc_ispck is greater than or equal to HCLOCK."
> > > Meanwhile, call the pm_runtime_enable() in the right place.
> > >
> > > Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> > > ---
> > >
> > > Changes in v3: None
> > > Changes in v2: None
> > >
> > > drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
> > > 1 file changed, 25 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
> > > index 0b15dc1a3a0b..f092c95587c1 100644
> > > --- a/drivers/media/platform/atmel/atmel-isc.c
> > > +++ b/drivers/media/platform/atmel/atmel-isc.c
> > > @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> > > struct isc_subdev_entity *sd_entity;
> > > struct video_device *vdev = &isc->video_dev;
> > > struct vb2_queue *q = &isc->vb2_vidq;
> > > + struct device *dev = isc->dev;
> > > int ret;
> > > ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
> > > @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> > > return ret;
> > > }
> > > + pm_runtime_set_active(dev);
> > > + pm_runtime_enable(dev);
> > > + pm_request_idle(dev);
> > Remember that the driver's async complete function could never get called.
> >
> > What would be the reason to move it here?
> The ISC provides the clock for the sensor, namely, it is the clock provider
> for the external sensor.
> So it keeps active to make the sensor probe successfully.
> Otherwise, the sensor, such as 0v7670 fails to probe due to the failure to
> clk_enable().
You'll still need to balance the get and put calls.
complete callback is not necessarily called at all or could be called
multiple times. Instead, you should probably do pm_runtime_get_sync() when
the clock is enabled and put when it's disabled.
--
Sakari Ailus
e-mail: sakari.ailus at iki.fi
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
2017-10-09 7:58 ` Sakari Ailus
@ 2017-10-09 10:01 ` Yang, Wenyou
-1 siblings, 0 replies; 20+ messages in thread
From: Yang, Wenyou @ 2017-10-09 10:01 UTC (permalink / raw)
To: Sakari Ailus
Cc: Hans Verkuil, Jonathan Corbet, linux-kernel,
Mauro Carvalho Chehab, linux-arm-kernel,
Linux Media Mailing List
Hi Sakari,
On 2017/10/9 15:58, Sakari Ailus wrote:
> Hi
> Wenyou,
>
> On Mon, Oct 09, 2017 at 01:49:44PM +0800, Yang, Wenyou wrote:
>> Hi Sakari,
>>
>> Sorry for late answer, because I was in vacation last week.
>>
>> On 2017/9/29 5:25, Sakari Ailus wrote:
>>> Hi Wenyou,
>>>
>>> On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
>>>> To meet the relationship, enable the HCLOCK and ispck during the
>>>> device probe, "isc_pck frequency is less than or equal to isc_ispck,
>>>> and isc_ispck is greater than or equal to HCLOCK."
>>>> Meanwhile, call the pm_runtime_enable() in the right place.
>>>>
>>>> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
>>>> ---
>>>>
>>>> Changes in v3: None
>>>> Changes in v2: None
>>>>
>>>> drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
>>>> 1 file changed, 25 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
>>>> index 0b15dc1a3a0b..f092c95587c1 100644
>>>> --- a/drivers/media/platform/atmel/atmel-isc.c
>>>> +++ b/drivers/media/platform/atmel/atmel-isc.c
>>>> @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>>>> struct isc_subdev_entity *sd_entity;
>>>> struct video_device *vdev = &isc->video_dev;
>>>> struct vb2_queue *q = &isc->vb2_vidq;
>>>> + struct device *dev = isc->dev;
>>>> int ret;
>>>> ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
>>>> @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>>>> return ret;
>>>> }
>>>> + pm_runtime_set_active(dev);
>>>> + pm_runtime_enable(dev);
>>>> + pm_request_idle(dev);
>>> Remember that the driver's async complete function could never get called.
>>>
>>> What would be the reason to move it here?
>> The ISC provides the clock for the sensor, namely, it is the clock provider
>> for the external sensor.
>> So it keeps active to make the sensor probe successfully.
>> Otherwise, the sensor, such as 0v7670 fails to probe due to the failure to
>> clk_enable().
> You'll still need to balance the get and put calls.
>
> complete callback is not necessarily called at all or could be called
> multiple times. Instead, you should probably do pm_runtime_get_sync() when
> the clock is enabled and put when it's disabled.
I will send v4 to update it.
Thank you for your advice.
Best Regards,
Wenyou Yang
^ permalink raw reply [flat|nested] 20+ messages in thread
* [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
@ 2017-10-09 10:01 ` Yang, Wenyou
0 siblings, 0 replies; 20+ messages in thread
From: Yang, Wenyou @ 2017-10-09 10:01 UTC (permalink / raw)
To: linux-arm-kernel
Hi Sakari,
On 2017/10/9 15:58, Sakari Ailus wrote:
> Hi
> Wenyou,
>
> On Mon, Oct 09, 2017 at 01:49:44PM +0800, Yang, Wenyou wrote:
>> Hi Sakari,
>>
>> Sorry for late answer, because I was in vacation last week.
>>
>> On 2017/9/29 5:25, Sakari Ailus wrote:
>>> Hi Wenyou,
>>>
>>> On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
>>>> To meet the relationship, enable the HCLOCK and ispck during the
>>>> device probe, "isc_pck frequency is less than or equal to isc_ispck,
>>>> and isc_ispck is greater than or equal to HCLOCK."
>>>> Meanwhile, call the pm_runtime_enable() in the right place.
>>>>
>>>> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
>>>> ---
>>>>
>>>> Changes in v3: None
>>>> Changes in v2: None
>>>>
>>>> drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
>>>> 1 file changed, 25 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
>>>> index 0b15dc1a3a0b..f092c95587c1 100644
>>>> --- a/drivers/media/platform/atmel/atmel-isc.c
>>>> +++ b/drivers/media/platform/atmel/atmel-isc.c
>>>> @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>>>> struct isc_subdev_entity *sd_entity;
>>>> struct video_device *vdev = &isc->video_dev;
>>>> struct vb2_queue *q = &isc->vb2_vidq;
>>>> + struct device *dev = isc->dev;
>>>> int ret;
>>>> ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
>>>> @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>>>> return ret;
>>>> }
>>>> + pm_runtime_set_active(dev);
>>>> + pm_runtime_enable(dev);
>>>> + pm_request_idle(dev);
>>> Remember that the driver's async complete function could never get called.
>>>
>>> What would be the reason to move it here?
>> The ISC provides the clock for the sensor, namely, it is the clock provider
>> for the external sensor.
>> So it keeps active to make the sensor probe successfully.
>> Otherwise, the sensor, such as 0v7670 fails to probe due to the failure to
>> clk_enable().
> You'll still need to balance the get and put calls.
>
> complete callback is not necessarily called at all or could be called
> multiple times. Instead, you should probably do pm_runtime_get_sync() when
> the clock is enabled and put when it's disabled.
I will send v4 to update it.
Thank you for your advice.
Best Regards,
Wenyou Yang
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2017-10-09 10:01 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-28 8:18 [PATCH v3 0/5] media: atmel-isc: Rework the format list and clock provider Wenyou Yang
2017-09-28 8:18 ` Wenyou Yang
2017-09-28 8:18 ` [PATCH v3 1/5] media: atmel-isc: Add spin lock for clock enable ops Wenyou Yang
2017-09-28 8:18 ` Wenyou Yang
2017-09-28 8:18 ` [PATCH v3 2/5] media: atmel-isc: Add prepare and unprepare ops Wenyou Yang
2017-09-28 8:18 ` Wenyou Yang
2017-09-28 8:18 ` [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe Wenyou Yang
2017-09-28 8:18 ` Wenyou Yang
2017-09-28 21:25 ` Sakari Ailus
2017-09-28 21:25 ` Sakari Ailus
2017-10-09 5:49 ` Yang, Wenyou
2017-10-09 5:49 ` Yang, Wenyou
2017-10-09 7:58 ` Sakari Ailus
2017-10-09 7:58 ` Sakari Ailus
2017-10-09 10:01 ` Yang, Wenyou
2017-10-09 10:01 ` Yang, Wenyou
2017-09-28 8:18 ` [PATCH v3 4/5] media: atmel-isc: Remove unnecessary member Wenyou Yang
2017-09-28 8:18 ` Wenyou Yang
2017-09-28 8:18 ` [PATCH v3 5/5] media: atmel-isc: Rework the format list Wenyou Yang
2017-09-28 8:18 ` Wenyou Yang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.