[PATCH net-next v6 0/4] bpf: add two helpers to read perf event enabled/running time

[PATCH net-next v6 0/4] bpf: add two helpers to read perf event enabled/running time

[Yonghong Song]

Hardware pmu counters are limited resources. When there are more
pmu based perf events opened than available counters, kernel will
multiplex these events so each event gets certain percentage
(but not 100%) of the pmu time. In case that multiplexing happens,
the number of samples or counter value will not reflect the
case compared to no multiplexing. This makes comparison between
different runs difficult.

Typically, the number of samples or counter value should be
normalized before comparing to other experiments. The typical
normalization is done like:
  normalized_num_samples = num_samples * time_enabled / time_running
  normalized_counter_value = counter_value * time_enabled / time_running
where time_enabled is the time enabled for event and time_running is
the time running for event since last normalization.

This patch set implements two helper functions.
The helper bpf_perf_event_read_value reads counter/time_enabled/time_running
for perf event array map. The helper bpf_perf_prog_read_value read
counter/time_enabled/time_running for bpf prog with type BPF_PROG_TYPE_PERF_EVENT.

[Dave, Peter,

 Previous communcation shows that this patch may potentially have
 merge conflict with upcoming tip changes in the next merge window.

 Could you advise how this patch should proceed?

 Thanks!
]

Changelogs:
v5->v6:
  . rebase on top of net-next
v4->v5:
  . fix some coding style issues
  . memset the input buffer in case of error for ARG_PTR_TO_UNINIT_MEM
    type of argument.
v3->v4:
  . fix a build failure
v2->v3:
  . counters should be read in order to read enabled/running time. This is to
    prevent that counters and enabled/running time may be read separately.
v1->v2:
  . reading enabled/running time should be together with reading counters
    which contains the logic to ensure the result is valid.

Yonghong Song (4):
  bpf: add helper bpf_perf_event_read_value for perf event array map
  bpf: add a test case for helper bpf_perf_event_read_value
  bpf: add helper bpf_perf_prog_read_value
  bpf: add a test case for helper bpf_perf_prog_read_value

 include/linux/perf_event.h                |  7 ++-
 include/uapi/linux/bpf.h                  | 28 +++++++++++-
 kernel/bpf/arraymap.c                     |  2 +-
 kernel/bpf/verifier.c                     |  4 +-
 kernel/events/core.c                      | 16 +++++--
 kernel/trace/bpf_trace.c                  | 74 ++++++++++++++++++++++++++++---
 samples/bpf/trace_event_kern.c            | 10 +++++
 samples/bpf/trace_event_user.c            | 13 +++---
 samples/bpf/tracex6_kern.c                | 26 +++++++++++
 samples/bpf/tracex6_user.c                | 13 +++++-
 tools/include/uapi/linux/bpf.h            |  4 +-
 tools/testing/selftests/bpf/bpf_helpers.h |  6 +++
 12 files changed, 182 insertions(+), 21 deletions(-)

-- 
2.9.5

[PATCH net-next v6 1/4] bpf: add helper bpf_perf_event_read_value for perf event array map

[Yonghong Song]

Hardware pmu counters are limited resources. When there are more
pmu based perf events opened than available counters, kernel will
multiplex these events so each event gets certain percentage
(but not 100%) of the pmu time. In case that multiplexing happens,
the number of samples or counter value will not reflect the
case compared to no multiplexing. This makes comparison between
different runs difficult.

Typically, the number of samples or counter value should be
normalized before comparing to other experiments. The typical
normalization is done like:
  normalized_num_samples = num_samples * time_enabled / time_running
  normalized_counter_value = counter_value * time_enabled / time_running
where time_enabled is the time enabled for event and time_running is
the time running for event since last normalization.

This patch adds helper bpf_perf_event_read_value for kprobed based perf
event array map, to read perf counter and enabled/running time.
The enabled/running time is accumulated since the perf event open.
To achieve scaling factor between two bpf invocations, users
can can use cpu_id as the key (which is typical for perf array usage model)
to remember the previous value and do the calculation inside the
bpf program.

Signed-off-by: Yonghong Song <yhs@fb.com>
---
 include/linux/perf_event.h |  6 ++++--
 include/uapi/linux/bpf.h   | 20 ++++++++++++++++++--
 kernel/bpf/arraymap.c      |  2 +-
 kernel/bpf/verifier.c      |  4 +++-
 kernel/events/core.c       | 15 ++++++++++++---
 kernel/trace/bpf_trace.c   | 46 +++++++++++++++++++++++++++++++++++++++++-----
 6 files changed, 79 insertions(+), 14 deletions(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 8e22f24..21d8c12 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -884,7 +884,8 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr,
 				void *context);
 extern void perf_pmu_migrate_context(struct pmu *pmu,
 				int src_cpu, int dst_cpu);
-int perf_event_read_local(struct perf_event *event, u64 *value);
+int perf_event_read_local(struct perf_event *event, u64 *value,
+			  u64 *enabled, u64 *running);
 extern u64 perf_event_read_value(struct perf_event *event,
 				 u64 *enabled, u64 *running);
 
@@ -1286,7 +1287,8 @@ static inline const struct perf_event_attr *perf_event_attrs(struct perf_event *
 {
 	return ERR_PTR(-EINVAL);
 }
-static inline int perf_event_read_local(struct perf_event *event, u64 *value)
+static inline int perf_event_read_local(struct perf_event *event, u64 *value,
+					u64 *enabled, u64 *running)
 {
 	return -EINVAL;
 }
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 6d2137b..4bdd4b2 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -592,6 +592,13 @@ union bpf_attr {
  *     @xdp_md: pointer to xdp_md
  *     @delta: An positive/negative integer to be added to xdp_md.data_meta
  *     Return: 0 on success or negative on error
+ * int bpf_perf_event_read_value(map, flags, buf, buf_size)
+ *     read perf event counter value and perf event enabled/running time
+ *     @map: pointer to perf_event_array map
+ *     @flags: index of event in the map or bitmask flags
+ *     @buf: buf to fill
+ *     @buf_size: size of the buf
+ *     Return: 0 on success or negative error code
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -648,7 +655,8 @@ union bpf_attr {
 	FN(redirect_map),		\
 	FN(sk_redirect_map),		\
 	FN(sock_map_update),		\
-	FN(xdp_adjust_meta),
+	FN(xdp_adjust_meta),		\
+	FN(perf_event_read_value),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -692,7 +700,9 @@ enum bpf_func_id {
 #define BPF_F_ZERO_CSUM_TX		(1ULL << 1)
 #define BPF_F_DONT_FRAGMENT		(1ULL << 2)
 
-/* BPF_FUNC_perf_event_output and BPF_FUNC_perf_event_read flags. */
+/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and
+ * BPF_FUNC_perf_event_read_value flags.
+ */
 #define BPF_F_INDEX_MASK		0xffffffffULL
 #define BPF_F_CURRENT_CPU		BPF_F_INDEX_MASK
 /* BPF_FUNC_perf_event_output for sk_buff input context. */
@@ -885,4 +895,10 @@ enum {
 #define TCP_BPF_IW		1001	/* Set TCP initial congestion window */
 #define TCP_BPF_SNDCWND_CLAMP	1002	/* Set sndcwnd_clamp */
 
+struct bpf_perf_event_value {
+	__u64 counter;
+	__u64 enabled;
+	__u64 running;
+};
+
 #endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/kernel/bpf/arraymap.c b/kernel/bpf/arraymap.c
index 98c0f00..68d8666 100644
--- a/kernel/bpf/arraymap.c
+++ b/kernel/bpf/arraymap.c
@@ -492,7 +492,7 @@ static void *perf_event_fd_array_get_ptr(struct bpf_map *map,
 
 	ee = ERR_PTR(-EOPNOTSUPP);
 	event = perf_file->private_data;
-	if (perf_event_read_local(event, &value) == -EOPNOTSUPP)
+	if (perf_event_read_local(event, &value, NULL, NULL) == -EOPNOTSUPP)
 		goto err_out;
 
 	ee = bpf_event_entry_gen(perf_file, map_file);
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 4cf9b72..b0cbc2d 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1552,7 +1552,8 @@ static int check_map_func_compatibility(struct bpf_map *map, int func_id)
 		break;
 	case BPF_MAP_TYPE_PERF_EVENT_ARRAY:
 		if (func_id != BPF_FUNC_perf_event_read &&
-		    func_id != BPF_FUNC_perf_event_output)
+		    func_id != BPF_FUNC_perf_event_output &&
+		    func_id != BPF_FUNC_perf_event_read_value)
 			goto error;
 		break;
 	case BPF_MAP_TYPE_STACK_TRACE:
@@ -1595,6 +1596,7 @@ static int check_map_func_compatibility(struct bpf_map *map, int func_id)
 		break;
 	case BPF_FUNC_perf_event_read:
 	case BPF_FUNC_perf_event_output:
+	case BPF_FUNC_perf_event_read_value:
 		if (map->map_type != BPF_MAP_TYPE_PERF_EVENT_ARRAY)
 			goto error;
 		break;
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 6bc21e2..c761ef4 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3684,10 +3684,12 @@ static inline u64 perf_event_count(struct perf_event *event)
  *     will not be local and we cannot read them atomically
  *   - must not have a pmu::count method
  */
-int perf_event_read_local(struct perf_event *event, u64 *value)
+int perf_event_read_local(struct perf_event *event, u64 *value,
+			  u64 *enabled, u64 *running)
 {
 	unsigned long flags;
 	int ret = 0;
+	u64 now;
 
 	/*
 	 * Disabling interrupts avoids all counter scheduling (context
@@ -3718,14 +3720,21 @@ int perf_event_read_local(struct perf_event *event, u64 *value)
 		goto out;
 	}
 
+	now = event->shadow_ctx_time + perf_clock();
+	if (enabled)
+		*enabled = now - event->tstamp_enabled;
 	/*
 	 * If the event is currently on this CPU, its either a per-task event,
 	 * or local to this CPU. Furthermore it means its ACTIVE (otherwise
 	 * oncpu == -1).
 	 */
-	if (event->oncpu == smp_processor_id())
+	if (event->oncpu == smp_processor_id()) {
 		event->pmu->read(event);
-
+		if (running)
+			*running = now - event->tstamp_running;
+	} else if (running) {
+		*running = event->total_time_running;
+	}
 	*value = local64_read(&event->count);
 out:
 	local_irq_restore(flags);
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index dc498b6..686dfa1 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -255,14 +255,13 @@ const struct bpf_func_proto *bpf_get_trace_printk_proto(void)
 	return &bpf_trace_printk_proto;
 }
 
-BPF_CALL_2(bpf_perf_event_read, struct bpf_map *, map, u64, flags)
-{
+static __always_inline int
+get_map_perf_counter(struct bpf_map *map, u64 flags,
+		     u64 *value, u64 *enabled, u64 *running) {
 	struct bpf_array *array = container_of(map, struct bpf_array, map);
 	unsigned int cpu = smp_processor_id();
 	u64 index = flags & BPF_F_INDEX_MASK;
 	struct bpf_event_entry *ee;
-	u64 value = 0;
-	int err;
 
 	if (unlikely(flags & ~(BPF_F_INDEX_MASK)))
 		return -EINVAL;
@@ -275,7 +274,15 @@ BPF_CALL_2(bpf_perf_event_read, struct bpf_map *, map, u64, flags)
 	if (!ee)
 		return -ENOENT;
 
-	err = perf_event_read_local(ee->event, &value);
+	return perf_event_read_local(ee->event, value, enabled, running);
+}
+
+BPF_CALL_2(bpf_perf_event_read, struct bpf_map *, map, u64, flags)
+{
+	u64 value = 0;
+	int err;
+
+	err = get_map_perf_counter(map, flags, &value, NULL, NULL);
 	/*
 	 * this api is ugly since we miss [-22..-2] range of valid
 	 * counter values, but that's uapi
@@ -293,6 +300,33 @@ static const struct bpf_func_proto bpf_perf_event_read_proto = {
 	.arg2_type	= ARG_ANYTHING,
 };
 
+BPF_CALL_4(bpf_perf_event_read_value, struct bpf_map *, map, u64, flags,
+	   struct bpf_perf_event_value *, buf, u32, size)
+{
+	int err;
+
+	if (unlikely(size != sizeof(struct bpf_perf_event_value)))
+		return -EINVAL;
+
+	err = get_map_perf_counter(map, flags, &buf->counter, &buf->enabled,
+				   &buf->running);
+	if (unlikely(err)) {
+		memset(buf, 0, size);
+		return err;
+	}
+	return 0;
+}
+
+static const struct bpf_func_proto bpf_perf_event_read_value_proto = {
+	.func		= bpf_perf_event_read_value,
+	.gpl_only	= true,
+	.ret_type	= RET_INTEGER,
+	.arg1_type	= ARG_CONST_MAP_PTR,
+	.arg2_type	= ARG_ANYTHING,
+	.arg3_type	= ARG_PTR_TO_UNINIT_MEM,
+	.arg4_type	= ARG_CONST_SIZE,
+};
+
 static DEFINE_PER_CPU(struct perf_sample_data, bpf_sd);
 
 static __always_inline u64
@@ -499,6 +533,8 @@ static const struct bpf_func_proto *kprobe_prog_func_proto(enum bpf_func_id func
 		return &bpf_perf_event_output_proto;
 	case BPF_FUNC_get_stackid:
 		return &bpf_get_stackid_proto;
+	case BPF_FUNC_perf_event_read_value:
+		return &bpf_perf_event_read_value_proto;
 	default:
 		return tracing_func_proto(func_id);
 	}
-- 
2.9.5

[PATCH net-next v6 2/4] bpf: add a test case for helper bpf_perf_event_read_value

[Yonghong Song]

The bpf sample program tracex6 is enhanced to use the new
helper to read enabled/running time as well.

Signed-off-by: Yonghong Song <yhs@fb.com>
---
 samples/bpf/tracex6_kern.c                | 26 ++++++++++++++++++++++++++
 samples/bpf/tracex6_user.c                | 13 ++++++++++++-
 tools/include/uapi/linux/bpf.h            |  3 ++-
 tools/testing/selftests/bpf/bpf_helpers.h |  3 +++
 4 files changed, 43 insertions(+), 2 deletions(-)

diff --git a/samples/bpf/tracex6_kern.c b/samples/bpf/tracex6_kern.c
index e7d1803..46c557a 100644
--- a/samples/bpf/tracex6_kern.c
+++ b/samples/bpf/tracex6_kern.c
@@ -15,6 +15,12 @@ struct bpf_map_def SEC("maps") values = {
 	.value_size = sizeof(u64),
 	.max_entries = 64,
 };
+struct bpf_map_def SEC("maps") values2 = {
+	.type = BPF_MAP_TYPE_HASH,
+	.key_size = sizeof(int),
+	.value_size = sizeof(struct bpf_perf_event_value),
+	.max_entries = 64,
+};
 
 SEC("kprobe/htab_map_get_next_key")
 int bpf_prog1(struct pt_regs *ctx)
@@ -37,5 +43,25 @@ int bpf_prog1(struct pt_regs *ctx)
 	return 0;
 }
 
+SEC("kprobe/htab_map_lookup_elem")
+int bpf_prog2(struct pt_regs *ctx)
+{
+	u32 key = bpf_get_smp_processor_id();
+	struct bpf_perf_event_value *val, buf;
+	int error;
+
+	error = bpf_perf_event_read_value(&counters, key, &buf, sizeof(buf));
+	if (error)
+		return 0;
+
+	val = bpf_map_lookup_elem(&values2, &key);
+	if (val)
+		*val = buf;
+	else
+		bpf_map_update_elem(&values2, &key, &buf, BPF_NOEXIST);
+
+	return 0;
+}
+
 char _license[] SEC("license") = "GPL";
 u32 _version SEC("version") = LINUX_VERSION_CODE;
diff --git a/samples/bpf/tracex6_user.c b/samples/bpf/tracex6_user.c
index a05a99a..3341a96 100644
--- a/samples/bpf/tracex6_user.c
+++ b/samples/bpf/tracex6_user.c
@@ -22,6 +22,7 @@
 
 static void check_on_cpu(int cpu, struct perf_event_attr *attr)
 {
+	struct bpf_perf_event_value value2;
 	int pmu_fd, error = 0;
 	cpu_set_t set;
 	__u64 value;
@@ -46,8 +47,18 @@ static void check_on_cpu(int cpu, struct perf_event_attr *attr)
 		fprintf(stderr, "Value missing for CPU %d\n", cpu);
 		error = 1;
 		goto on_exit;
+	} else {
+		fprintf(stderr, "CPU %d: %llu\n", cpu, value);
+	}
+	/* The above bpf_map_lookup_elem should trigger the second kprobe */
+	if (bpf_map_lookup_elem(map_fd[2], &cpu, &value2)) {
+		fprintf(stderr, "Value2 missing for CPU %d\n", cpu);
+		error = 1;
+		goto on_exit;
+	} else {
+		fprintf(stderr, "CPU %d: counter: %llu, enabled: %llu, running: %llu\n", cpu,
+			value2.counter, value2.enabled, value2.running);
 	}
-	fprintf(stderr, "CPU %d: %llu\n", cpu, value);
 
 on_exit:
 	assert(bpf_map_delete_elem(map_fd[0], &cpu) == 0 || error);
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 6d2137b..db51cbc 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -648,7 +648,8 @@ union bpf_attr {
 	FN(redirect_map),		\
 	FN(sk_redirect_map),		\
 	FN(sock_map_update),		\
-	FN(xdp_adjust_meta),
+	FN(xdp_adjust_meta),		\
+	FN(perf_event_read_value),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index a56053d..c15ca83 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -72,6 +72,9 @@ static int (*bpf_sk_redirect_map)(void *map, int key, int flags) =
 static int (*bpf_sock_map_update)(void *map, void *key, void *value,
 				  unsigned long long flags) =
 	(void *) BPF_FUNC_sock_map_update;
+static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags,
+					void *buf, unsigned int buf_size) =
+	(void *) BPF_FUNC_perf_event_read_value;
 
 
 /* llvm builtin functions that eBPF C program may use to
-- 
2.9.5

[PATCH net-next v6 3/4] bpf: add helper bpf_perf_prog_read_value

[Yonghong Song]

This patch adds helper bpf_perf_prog_read_cvalue for perf event based bpf
programs, to read event counter and enabled/running time.
The enabled/running time is accumulated since the perf event open.

The typical use case for perf event based bpf program is to attach itself
to a single event. In such cases, if it is desirable to get scaling factor
between two bpf invocations, users can can save the time values in a map,
and use the value from the map and the current value to calculate
the scaling factor.

Signed-off-by: Yonghong Song <yhs@fb.com>
---
 include/linux/perf_event.h |  1 +
 include/uapi/linux/bpf.h   | 10 +++++++++-
 kernel/events/core.c       |  1 +
 kernel/trace/bpf_trace.c   | 28 ++++++++++++++++++++++++++++
 4 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 21d8c12..79b18a2 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -806,6 +806,7 @@ struct perf_output_handle {
 struct bpf_perf_event_data_kern {
 	struct pt_regs *regs;
 	struct perf_sample_data *data;
+	struct perf_event *event;
 };
 
 #ifdef CONFIG_CGROUP_PERF
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 4bdd4b2..6f6a236 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -599,6 +599,13 @@ union bpf_attr {
  *     @buf: buf to fill
  *     @buf_size: size of the buf
  *     Return: 0 on success or negative error code
+ *
+ * int bpf_perf_prog_read_value(ctx, buf, buf_size)
+ *     read perf prog attached perf event counter and enabled/running time
+ *     @ctx: pointer to ctx
+ *     @buf: buf to fill
+ *     @buf_size: size of the buf
+ *     Return : 0 on success or negative error code
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -656,7 +663,8 @@ union bpf_attr {
 	FN(sk_redirect_map),		\
 	FN(sock_map_update),		\
 	FN(xdp_adjust_meta),		\
-	FN(perf_event_read_value),
+	FN(perf_event_read_value),	\
+	FN(perf_prog_read_value),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
diff --git a/kernel/events/core.c b/kernel/events/core.c
index c761ef4..d1efac2 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -8081,6 +8081,7 @@ static void bpf_overflow_handler(struct perf_event *event,
 	struct bpf_perf_event_data_kern ctx = {
 		.data = data,
 		.regs = regs,
+		.event = event,
 	};
 	int ret = 0;
 
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 686dfa1..c4d617a 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -612,6 +612,32 @@ static const struct bpf_func_proto bpf_get_stackid_proto_tp = {
 	.arg3_type	= ARG_ANYTHING,
 };
 
+BPF_CALL_3(bpf_perf_prog_read_value_tp, struct bpf_perf_event_data_kern *, ctx,
+	   struct bpf_perf_event_value *, buf, u32, size)
+{
+	int err;
+
+	if (unlikely(size != sizeof(struct bpf_perf_event_value)))
+		return -EINVAL;
+
+	err = perf_event_read_local(ctx->event, &buf->counter, &buf->enabled,
+				    &buf->running);
+	if (unlikely(err)) {
+		memset(buf, 0, size);
+		return err;
+	}
+	return 0;
+}
+
+static const struct bpf_func_proto bpf_perf_prog_read_value_proto_tp = {
+         .func           = bpf_perf_prog_read_value_tp,
+         .gpl_only       = true,
+         .ret_type       = RET_INTEGER,
+         .arg1_type      = ARG_PTR_TO_CTX,
+         .arg2_type      = ARG_PTR_TO_UNINIT_MEM,
+         .arg3_type      = ARG_CONST_SIZE,
+};
+
 static const struct bpf_func_proto *tp_prog_func_proto(enum bpf_func_id func_id)
 {
 	switch (func_id) {
@@ -619,6 +645,8 @@ static const struct bpf_func_proto *tp_prog_func_proto(enum bpf_func_id func_id)
 		return &bpf_perf_event_output_proto_tp;
 	case BPF_FUNC_get_stackid:
 		return &bpf_get_stackid_proto_tp;
+	case BPF_FUNC_perf_prog_read_value:
+		return &bpf_perf_prog_read_value_proto_tp;
 	default:
 		return tracing_func_proto(func_id);
 	}
-- 
2.9.5

[PATCH net-next v6 4/4] bpf: add a test case for helper bpf_perf_prog_read_value

[Yonghong Song]

The bpf sample program trace_event is enhanced to use the new
helper to print out enabled/running time.

Signed-off-by: Yonghong Song <yhs@fb.com>
---
 samples/bpf/trace_event_kern.c            | 10 ++++++++++
 samples/bpf/trace_event_user.c            | 13 ++++++++-----
 tools/include/uapi/linux/bpf.h            |  3 ++-
 tools/testing/selftests/bpf/bpf_helpers.h |  3 +++
 4 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/samples/bpf/trace_event_kern.c b/samples/bpf/trace_event_kern.c
index 41b6115..a77a583d 100644
--- a/samples/bpf/trace_event_kern.c
+++ b/samples/bpf/trace_event_kern.c
@@ -37,10 +37,14 @@ struct bpf_map_def SEC("maps") stackmap = {
 SEC("perf_event")
 int bpf_prog1(struct bpf_perf_event_data *ctx)
 {
+	char time_fmt1[] = "Time Enabled: %llu, Time Running: %llu";
+	char time_fmt2[] = "Get Time Failed, ErrCode: %d";
 	char fmt[] = "CPU-%d period %lld ip %llx";
 	u32 cpu = bpf_get_smp_processor_id();
+	struct bpf_perf_event_value value_buf;
 	struct key_t key;
 	u64 *val, one = 1;
+	int ret;
 
 	if (ctx->sample_period < 10000)
 		/* ignore warmup */
@@ -54,6 +58,12 @@ int bpf_prog1(struct bpf_perf_event_data *ctx)
 		return 0;
 	}
 
+	ret = bpf_perf_prog_read_value(ctx, (void *)&value_buf, sizeof(struct bpf_perf_event_value));
+	if (!ret)
+	  bpf_trace_printk(time_fmt1, sizeof(time_fmt1), value_buf.enabled, value_buf.running);
+	else
+	  bpf_trace_printk(time_fmt2, sizeof(time_fmt2), ret);
+
 	val = bpf_map_lookup_elem(&counts, &key);
 	if (val)
 		(*val)++;
diff --git a/samples/bpf/trace_event_user.c b/samples/bpf/trace_event_user.c
index 7bd827b..bf4f1b6 100644
--- a/samples/bpf/trace_event_user.c
+++ b/samples/bpf/trace_event_user.c
@@ -127,6 +127,9 @@ static void test_perf_event_all_cpu(struct perf_event_attr *attr)
 	int *pmu_fd = malloc(nr_cpus * sizeof(int));
 	int i, error = 0;
 
+	/* system wide perf event, no need to inherit */
+	attr->inherit = 0;
+
 	/* open perf_event on all cpus */
 	for (i = 0; i < nr_cpus; i++) {
 		pmu_fd[i] = sys_perf_event_open(attr, -1, i, -1, 0);
@@ -154,6 +157,11 @@ static void test_perf_event_task(struct perf_event_attr *attr)
 {
 	int pmu_fd;
 
+	/* per task perf event, enable inherit so the "dd ..." command can be traced properly.
+	 * Enabling inherit will cause bpf_perf_prog_read_time helper failure.
+	 */
+	attr->inherit = 1;
+
 	/* open task bound event */
 	pmu_fd = sys_perf_event_open(attr, 0, -1, -1, 0);
 	if (pmu_fd < 0) {
@@ -175,14 +183,12 @@ static void test_bpf_perf_event(void)
 		.freq = 1,
 		.type = PERF_TYPE_HARDWARE,
 		.config = PERF_COUNT_HW_CPU_CYCLES,
-		.inherit = 1,
 	};
 	struct perf_event_attr attr_type_sw = {
 		.sample_freq = SAMPLE_FREQ,
 		.freq = 1,
 		.type = PERF_TYPE_SOFTWARE,
 		.config = PERF_COUNT_SW_CPU_CLOCK,
-		.inherit = 1,
 	};
 	struct perf_event_attr attr_hw_cache_l1d = {
 		.sample_freq = SAMPLE_FREQ,
@@ -192,7 +198,6 @@ static void test_bpf_perf_event(void)
 			PERF_COUNT_HW_CACHE_L1D |
 			(PERF_COUNT_HW_CACHE_OP_READ << 8) |
 			(PERF_COUNT_HW_CACHE_RESULT_ACCESS << 16),
-		.inherit = 1,
 	};
 	struct perf_event_attr attr_hw_cache_branch_miss = {
 		.sample_freq = SAMPLE_FREQ,
@@ -202,7 +207,6 @@ static void test_bpf_perf_event(void)
 			PERF_COUNT_HW_CACHE_BPU |
 			(PERF_COUNT_HW_CACHE_OP_READ << 8) |
 			(PERF_COUNT_HW_CACHE_RESULT_MISS << 16),
-		.inherit = 1,
 	};
 	struct perf_event_attr attr_type_raw = {
 		.sample_freq = SAMPLE_FREQ,
@@ -210,7 +214,6 @@ static void test_bpf_perf_event(void)
 		.type = PERF_TYPE_RAW,
 		/* Intel Instruction Retired */
 		.config = 0xc0,
-		.inherit = 1,
 	};
 
 	printf("Test HW_CPU_CYCLES\n");
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index db51cbc..cb7bec9 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -649,7 +649,8 @@ union bpf_attr {
 	FN(sk_redirect_map),		\
 	FN(sock_map_update),		\
 	FN(xdp_adjust_meta),		\
-	FN(perf_event_read_value),
+	FN(perf_event_read_value),	\
+	FN(perf_prog_read_value),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index c15ca83..e25dbf6 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -75,6 +75,9 @@ static int (*bpf_sock_map_update)(void *map, void *key, void *value,
 static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags,
 					void *buf, unsigned int buf_size) =
 	(void *) BPF_FUNC_perf_event_read_value;
+static int (*bpf_perf_prog_read_value)(void *ctx, void *buf,
+				       unsigned int buf_size) =
+	(void *) BPF_FUNC_perf_prog_read_value;
 
 
 /* llvm builtin functions that eBPF C program may use to
-- 
2.9.5

Re: [PATCH net-next v6 0/4] bpf: add two helpers to read perf event enabled/running time

[David Miller]

From: Yonghong Song <yhs@fb.com>
Date: Mon, 2 Oct 2017 15:42:14 -0700

> [Dave, Peter,
> 
>  Previous communcation shows that this patch may potentially have
>  merge conflict with upcoming tip changes in the next merge window.
> 
>  Could you advise how this patch should proceed?
> 
>  Thanks!
> ]

Indeed, Peter how do you want to handle this?

Thanks.

Re: [PATCH net-next v6 0/4] bpf: add two helpers to read perf event enabled/running time

[Peter Zijlstra]

On Wed, Oct 04, 2017 at 04:00:56PM -0700, David Miller wrote:
> From: Yonghong Song <yhs@fb.com>
> Date: Mon, 2 Oct 2017 15:42:14 -0700
> 
> > [Dave, Peter,
> > 
> >  Previous communcation shows that this patch may potentially have
> >  merge conflict with upcoming tip changes in the next merge window.
> > 
> >  Could you advise how this patch should proceed?
> > 
> >  Thanks!
> > ]
> 
> Indeed, Peter how do you want to handle this?

I think Alexei suggested that we merge the one patch in two branches and
let git sort it out. I _think_ I've done something similar before and it
worked.

Re: [PATCH net-next v6 0/4] bpf: add two helpers to read perf event enabled/running time

[Daniel Borkmann]

On 10/05/2017 10:34 AM, Peter Zijlstra wrote:
> On Wed, Oct 04, 2017 at 04:00:56PM -0700, David Miller wrote:
>> From: Yonghong Song <yhs@fb.com>
>> Date: Mon, 2 Oct 2017 15:42:14 -0700
>>
>>> [Dave, Peter,
>>>
>>>   Previous communcation shows that this patch may potentially have
>>>   merge conflict with upcoming tip changes in the next merge window.
>>>
>>>   Could you advise how this patch should proceed?
>>>
>>>   Thanks!
>>> ]
>>
>> Indeed, Peter how do you want to handle this?
>
> I think Alexei suggested that we merge the one patch in two branches and
> let git sort it out. I _think_ I've done something similar before and it
> worked.

Sounds good, we did something like this in the past as well I recall,
so lets make first patch isolated to only touch perf event area so
it can go into both trees, and the remaining pieces only for BPF bits
for net-next.