* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
@ 2017-10-09 15:46 ` Dan Haab
0 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2017-10-09 15:46 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Rob Herring,
Mark Rutland, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab
From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
board design.
Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faf46ab..563f8a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 0000000..15ffb1a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XBR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
@ 2017-10-09 15:46 ` Dan Haab
0 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2017-10-09 15:46 UTC (permalink / raw)
To: linux-arm-kernel
From: Dan Haab <dhaab@luxul.com>
This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
board design.
Signed-off-by: Dan Haab <dhaab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faf46ab..563f8a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 0000000..15ffb1a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XBR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
2017-10-09 15:46 ` Dan Haab
@ 2017-10-09 15:46 ` Dan Haab
-1 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2017-10-09 15:46 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Rob Herring,
Mark Rutland, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab
From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
board design.
Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 563f8a4..2d964c9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 0000000..ecd22a2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul ABR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
@ 2017-10-09 15:46 ` Dan Haab
0 siblings, 0 replies; 12+ messages in thread
From: Dan Haab @ 2017-10-09 15:46 UTC (permalink / raw)
To: linux-arm-kernel
From: Dan Haab <dhaab@luxul.com>
This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
board design.
Signed-off-by: Dan Haab <dhaab@luxul.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 563f8a4..2d964c9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 0000000..ecd22a2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul ABR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
2017-10-09 15:46 ` Dan Haab
@ 2017-10-09 16:50 ` Rafał Miłecki
-1 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2017-10-09 16:50 UTC (permalink / raw)
To: Dan Haab
Cc: Florian Fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab
On 9 October 2017 at 17:46, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
>
> This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
> board design.
>
> Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
Acked-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
@ 2017-10-09 16:50 ` Rafał Miłecki
0 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2017-10-09 16:50 UTC (permalink / raw)
To: linux-arm-kernel
On 9 October 2017 at 17:46, Dan Haab <riproute@gmail.com> wrote:
> From: Dan Haab <dhaab@luxul.com>
>
> This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
> board design.
>
> Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafa? Mi?ecki <rafal@milecki.pl>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
2017-10-09 15:46 ` Dan Haab
@ 2017-10-09 16:51 ` Rafał Miłecki
-1 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2017-10-09 16:51 UTC (permalink / raw)
To: Dan Haab
Cc: Florian Fainelli, Hauke Mehrtens, Jon Mason,
bcm-kernel-feedback-list, Rob Herring, Mark Rutland,
Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab
On 9 October 2017 at 17:46, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
>
> This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
> board design.
>
> Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
Acked-by: Rafał Miłecki <rafal-g1n6cQUeyibVItvQsEIGlw@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
@ 2017-10-09 16:51 ` Rafał Miłecki
0 siblings, 0 replies; 12+ messages in thread
From: Rafał Miłecki @ 2017-10-09 16:51 UTC (permalink / raw)
To: linux-arm-kernel
On 9 October 2017 at 17:46, Dan Haab <riproute@gmail.com> wrote:
> From: Dan Haab <dhaab@luxul.com>
>
> This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
> board design.
>
> Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafa? Mi?ecki <rafal@milecki.pl>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
2017-10-09 15:46 ` Dan Haab
@ 2017-10-09 19:44 ` Florian Fainelli
-1 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2017-10-09 19:44 UTC (permalink / raw)
To: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Dan Haab
Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason, Rob Herring,
Mark Rutland, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab
On Mon, 9 Oct 2017 09:46:22 -0600, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
>
> This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
> board design.
>
> Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
> ---
Applied to devicetree/next, thanks!
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
@ 2017-10-09 19:44 ` Florian Fainelli
0 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2017-10-09 19:44 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 9 Oct 2017 09:46:22 -0600, Dan Haab <riproute@gmail.com> wrote:
> From: Dan Haab <dhaab@luxul.com>
>
> This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
> board design.
>
> Signed-off-by: Dan Haab <dhaab@luxul.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
2017-10-09 15:46 ` Dan Haab
@ 2017-10-09 19:44 ` Florian Fainelli
-1 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2017-10-09 19:44 UTC (permalink / raw)
To: bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, Dan Haab
Cc: Rafał Miłecki, Hauke Mehrtens, Jon Mason, Rob Herring,
Mark Rutland, Russell King,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Dan Haab
On Mon, 9 Oct 2017 09:46:23 -0600, Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
>
> This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
> board design.
>
> Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
> ---
Applied to devicetree/next, thanks!
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
@ 2017-10-09 19:44 ` Florian Fainelli
0 siblings, 0 replies; 12+ messages in thread
From: Florian Fainelli @ 2017-10-09 19:44 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 9 Oct 2017 09:46:23 -0600, Dan Haab <riproute@gmail.com> wrote:
> From: Dan Haab <dhaab@luxul.com>
>
> This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
> board design.
>
> Signed-off-by: Dan Haab <dhaab@luxul.com>
> ---
Applied to devicetree/next, thanks!
--
Florian
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-10-09 19:44 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-09 15:46 [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Dan Haab
2017-10-09 15:46 ` Dan Haab
[not found] ` <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-10-09 15:46 ` [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 Dan Haab
2017-10-09 15:46 ` Dan Haab
[not found] ` <1507563983-7354-2-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-10-09 16:51 ` Rafał Miłecki
2017-10-09 16:51 ` Rafał Miłecki
2017-10-09 19:44 ` Florian Fainelli
2017-10-09 19:44 ` Florian Fainelli
2017-10-09 16:50 ` [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Rafał Miłecki
2017-10-09 16:50 ` Rafał Miłecki
2017-10-09 19:44 ` Florian Fainelli
2017-10-09 19:44 ` Florian Fainelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.