[U-Boot] [PATCH V2] ARM: imx6: Add DHCOM i.MX6 PDK board support

* [U-Boot] [PATCH V2] ARM: imx6: Add DHCOM i.MX6 PDK board support
@ 2017-10-09 19:51 Marek Vasut
  2017-10-10 13:32 ` Jagan Teki
  2017-10-12 16:20 ` Stefano Babic
  0 siblings, 2 replies; 7+ messages in thread
From: Marek Vasut @ 2017-10-09 19:51 UTC (permalink / raw)
  To: u-boot

Add support for the DHCOM i.MX6 PDK board. This board has:
- FEC ethernet
- EHCI USB host
- 3x SDMMC

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
---
V2: Use get_cpu_type() and imx_get_mac_from_fuse()
---
 arch/arm/mach-imx/mx6/Kconfig             |  10 +
 board/dhelectronics/dh_imx6/Kconfig       |  12 +
 board/dhelectronics/dh_imx6/MAINTAINERS   |   7 +
 board/dhelectronics/dh_imx6/Makefile      |  11 +
 board/dhelectronics/dh_imx6/dh_imx6.c     | 437 ++++++++++++++++++++++++++++++
 board/dhelectronics/dh_imx6/dh_imx6_spl.c | 399 +++++++++++++++++++++++++++
 configs/dh_imx6_defconfig                 |  51 ++++
 include/configs/dh_imx6.h                 | 191 +++++++++++++
 8 files changed, 1118 insertions(+)
 create mode 100644 board/dhelectronics/dh_imx6/Kconfig
 create mode 100644 board/dhelectronics/dh_imx6/MAINTAINERS
 create mode 100644 board/dhelectronics/dh_imx6/Makefile
 create mode 100644 board/dhelectronics/dh_imx6/dh_imx6.c
 create mode 100644 board/dhelectronics/dh_imx6/dh_imx6_spl.c
 create mode 100644 configs/dh_imx6_defconfig
 create mode 100644 include/configs/dh_imx6.h

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 540f2b29b1..b82db3af22 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -129,6 +129,15 @@ config TARGET_COLIBRI_IMX6
 	select DM_SERIAL
 	select DM_THERMAL
 
+config TARGET_DHCOMIMX6
+	bool "dh_imx6"
+	select BOARD_LATE_INIT
+	select BOARD_EARLY_INIT_F
+	select SUPPORT_SPL
+	select DM
+	select DM_THERMAL
+	imply CMD_SPL
+
 config TARGET_EMBESTMX6BOARDS
 	bool "embestmx6boards"
 	select BOARD_LATE_INIT
@@ -428,6 +437,7 @@ source "board/boundary/nitrogen6x/Kconfig"
 source "board/ccv/xpress/Kconfig"
 source "board/compulab/cm_fx6/Kconfig"
 source "board/congatec/cgtqmx6eval/Kconfig"
+source "board/dhelectronics/dh_imx6/Kconfig"
 source "board/el/el6x/Kconfig"
 source "board/embest/mx6boards/Kconfig"
 source "board/engicam/geam6ul/Kconfig"
diff --git a/board/dhelectronics/dh_imx6/Kconfig b/board/dhelectronics/dh_imx6/Kconfig
new file mode 100644
index 0000000000..0cfef9b097
--- /dev/null
+++ b/board/dhelectronics/dh_imx6/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_DHCOMIMX6
+
+config SYS_BOARD
+	default "dh_imx6"
+
+config SYS_VENDOR
+	default "dhelectronics"
+
+config SYS_CONFIG_NAME
+	default "dh_imx6"
+
+endif
diff --git a/board/dhelectronics/dh_imx6/MAINTAINERS b/board/dhelectronics/dh_imx6/MAINTAINERS
new file mode 100644
index 0000000000..e54bd60adb
--- /dev/null
+++ b/board/dhelectronics/dh_imx6/MAINTAINERS
@@ -0,0 +1,7 @@
+DH_IMX6 BOARD
+M:	Andreas Geisreiter <ageisreiter@dh-electronics.de>, Ludwig Zenz <lzenz@dh-electronics.de>
+S:	Maintained
+F:	board/dhelectronics/dh_imx6/
+F:	include/configs/dh_imx6.h
+F:	configs/dh_mx6q_defconfig
+F:	configs/dh_mx6dl_defconfig
diff --git a/board/dhelectronics/dh_imx6/Makefile b/board/dhelectronics/dh_imx6/Makefile
new file mode 100644
index 0000000000..bddc8d8568
--- /dev/null
+++ b/board/dhelectronics/dh_imx6/Makefile
@@ -0,0 +1,11 @@
+#
+# Copyright (C) 2017 Marek Vasut <marex@denx.de>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y	:= dh_imx6_spl.o
+else
+obj-y	:= dh_imx6.o
+endif
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c
new file mode 100644
index 0000000000..c76da4d2af
--- /dev/null
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -0,0 +1,437 @@
+/*
+ * DHCOM DH-iMX6 PDK board support
+ *
+ * Copyright (C) 2017 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/sata.h>
+#include <errno.h>
+#include <fsl_esdhc.h>
+#include <fuse.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define I2C_PAD_CTRL							\
+	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |	\
+	PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define EEPROM_I2C_ADDRESS	0x50
+
+#define PC			MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+static struct i2c_pads_info dh6sdl_i2c_pad_info0 = {
+	.scl = {
+		.i2c_mode  = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
+		.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
+		.gp = IMX_GPIO_NR(3, 21)
+	},
+	.sda = {
+		 .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
+		 .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
+		 .gp = IMX_GPIO_NR(3, 28)
+	 }
+};
+
+static struct i2c_pads_info dh6sdl_i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode  = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
+		.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
+		.gp = IMX_GPIO_NR(4, 12)
+	},
+	.sda = {
+		 .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
+		 .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
+		 .gp = IMX_GPIO_NR(4, 13)
+	 }
+};
+
+static struct i2c_pads_info dh6sdl_i2c_pad_info2 = {
+	.scl = {
+		.i2c_mode  = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
+		.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
+		.gp = IMX_GPIO_NR(1, 3)
+	},
+	.sda = {
+		 .i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
+		 .gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
+		 .gp = IMX_GPIO_NR(1, 6)
+	 }
+};
+
+static struct i2c_pads_info dh6dq_i2c_pad_info0 = {
+	.scl = {
+		.i2c_mode  = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
+		.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
+		.gp = IMX_GPIO_NR(3, 21)
+	},
+	.sda = {
+		 .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
+		 .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
+		 .gp = IMX_GPIO_NR(3, 28)
+	 }
+};
+
+static struct i2c_pads_info dh6dq_i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode  = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
+		.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
+		.gp = IMX_GPIO_NR(4, 12)
+	},
+	.sda = {
+		 .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
+		 .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
+		 .gp = IMX_GPIO_NR(4, 13)
+	 }
+};
+
+static struct i2c_pads_info dh6dq_i2c_pad_info2 = {
+	.scl = {
+		.i2c_mode  = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
+		.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
+		.gp = IMX_GPIO_NR(1, 3)
+	},
+	.sda = {
+		 .i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
+		 .gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
+		 .gp = IMX_GPIO_NR(1, 6)
+	 }
+};
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+	return 0;
+}
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+	return 1;
+}
+
+#ifdef CONFIG_FEC_MXC
+static void eth_phy_reset(void)
+{
+	/* Reset PHY */
+	gpio_direction_output(IMX_GPIO_NR(5, 0) , 0);
+	udelay(500);
+	gpio_set_value(IMX_GPIO_NR(5, 0), 1);
+
+	/* Enable VIO */
+	gpio_direction_output(IMX_GPIO_NR(1, 7) , 0);
+
+	/*
+	 * KSZ9021 PHY needs at least 10 mSec after PHY reset
+	 * is released to stabilize
+	 */
+	mdelay(10);
+}
+
+static int setup_fec_clock(void)
+{
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+	/* set gpr1[21] to select anatop clock */
+	clrsetbits_le32(&iomuxc_regs->gpr[1], 0x1 << 21, 0x1 << 21);
+
+	return enable_fec_anatop_clock(0, ENET_50MHZ);
+}
+
+int board_eth_init(bd_t *bis)
+{
+	uint32_t base = IMX_FEC_BASE;
+	struct mii_dev *bus = NULL;
+	struct phy_device *phydev = NULL;
+
+	setup_fec_clock();
+
+	eth_phy_reset();
+
+	bus = fec_get_miibus(base, -1);
+	if (!bus)
+		return -EINVAL;
+
+	/* Scan PHY 0 */
+	phydev = phy_find_by_mask(bus, 0xf, PHY_INTERFACE_MODE_RGMII);
+	if (!phydev) {
+		printf("Ethernet PHY not found!\n");
+		return -EINVAL;
+	}
+
+	return fec_probe(bis, -1, base, bus, phydev);
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+
+#define USDHC2_CD_GPIO	IMX_GPIO_NR(6, 16)
+#define USDHC3_CD_GPIO	IMX_GPIO_NR(7, 8)
+
+static struct fsl_esdhc_cfg usdhc_cfg[3] = {
+	{ USDHC2_BASE_ADDR },
+	{ USDHC3_BASE_ADDR },
+	{ USDHC4_BASE_ADDR },
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+	switch (cfg->esdhc_base) {
+	case USDHC2_BASE_ADDR:
+		return gpio_get_value(USDHC2_CD_GPIO);
+	case USDHC3_BASE_ADDR:
+		return !gpio_get_value(USDHC3_CD_GPIO);
+	case USDHC4_BASE_ADDR:
+		return 1; /* eMMC/uSDHC4 is always present */
+	}
+
+	return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+
+	/*
+	 * According to the board_mmc_init() the following map is done:
+	 * (U-Boot device node)    (Physical Port)
+	 * mmc0                    SD interface
+	 * mmc1                    micro SD
+	 * mmc2                    eMMC
+	 */
+	gpio_direction_input(USDHC2_CD_GPIO);
+	gpio_direction_input(USDHC3_CD_GPIO);
+
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+static void setup_usb(void)
+{
+	/*
+	 * Set daisy chain for otg_pin_id on MX6Q.
+	 * For MX6DL, this bit is reserved.
+	 */
+	imx_iomux_set_gpr_register(1, 13, 1, 0);
+}
+
+int board_usb_phy_mode(int port)
+{
+	return USB_INIT_HOST;
+}
+
+/* Use only Port 1 == DHCOM USB Host 1 */
+int board_ehci_hcd_init(int port)
+{
+	if (port == 1)
+		return 0;
+	else
+		return -ENODEV;
+}
+
+int board_ehci_power(int port, int on)
+{
+	switch (port) {
+	case 0:
+		break;
+	case 1:
+		gpio_direction_output(IMX_GPIO_NR(3, 31), !!on);
+		break;
+	default:
+		printf("MXC USB port %d not yet supported\n", port);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#endif
+
+static int setup_dhcom_mac_from_fuse(void)
+{
+	unsigned char enetaddr[6];
+	int ret;
+
+	ret = eth_env_get_enetaddr("ethaddr", enetaddr);
+	if (ret)	/* ethaddr is already set */
+		return 0;
+
+	imx_get_mac_from_fuse(0, enetaddr);
+
+	if (is_valid_ethaddr(enetaddr)) {
+		eth_env_set_enetaddr("ethaddr", enetaddr);
+		return 0;
+	}
+
+	ret = i2c_set_bus_num(2);
+	if (ret) {
+		printf("Error switching I2C bus!\n");
+		return ret;
+	}
+
+	ret = i2c_read(EEPROM_I2C_ADDRESS, 0xfa, 0x1, enetaddr, 0x6);
+	if (ret) {
+		printf("Error reading configuration EEPROM!\n");
+		return ret;
+	}
+
+	if (is_valid_ethaddr(enetaddr))
+		eth_env_set_enetaddr("ethaddr", enetaddr);
+
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+#ifdef CONFIG_USB_EHCI_MX6
+	setup_usb();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	if (bus == 0 && cs == 0)
+		return IMX_GPIO_NR(2, 30);
+	else
+		return -1;
+}
+#endif
+
+int board_init(void)
+{
+	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	/* Enable eim_slow clocks */
+	setbits_le32(&mxc_ccm->CCGR6, 0x1 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET);
+
+#ifdef CONFIG_SYS_I2C_MXC
+	if (is_mx6dq()) {
+		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info0);
+		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info1);
+		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info2);
+	} else {
+		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info0);
+		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info1);
+		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info2);
+	}
+#endif
+
+#ifdef CONFIG_SATA
+	setup_sata();
+#endif
+
+	setup_dhcom_mac_from_fuse();
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{"sd3",	 MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	/* 8 bit bus width */
+	{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+#define HW_CODE_BIT_0	IMX_GPIO_NR(2, 19)
+#define HW_CODE_BIT_1	IMX_GPIO_NR(6, 6)
+#define HW_CODE_BIT_2	IMX_GPIO_NR(2, 16)
+
+static int board_get_hwcode(void)
+{
+	int hw_code;
+
+	gpio_direction_input(HW_CODE_BIT_0);
+	gpio_direction_input(HW_CODE_BIT_1);
+	gpio_direction_input(HW_CODE_BIT_2);
+
+	/* HW 100 + HW 200 = 00b; HW 300 = 01b */
+	hw_code = ((gpio_get_value(HW_CODE_BIT_2) << 2) |
+		   (gpio_get_value(HW_CODE_BIT_1) << 1) |
+		    gpio_get_value(HW_CODE_BIT_0)) + 2;
+
+	return hw_code;
+}
+
+int board_late_init(void)
+{
+	u32 hw_code;
+	char buf[16];
+
+	hw_code = board_get_hwcode();
+
+	switch (get_cpu_type()) {
+	case MXC_CPU_MX6SOLO:
+		snprintf(buf, sizeof(buf), "imx6s-dhcom%1d", hw_code);
+		break;
+	case MXC_CPU_MX6DL:
+		snprintf(buf, sizeof(buf), "imx6dl-dhcom%1d", hw_code);
+		break;
+	case MXC_CPU_MX6D:
+		snprintf(buf, sizeof(buf), "imx6d-dhcom%1d", hw_code);
+		break;
+	case MXC_CPU_MX6Q:
+		snprintf(buf, sizeof(buf), "imx6q-dhcom%1d", hw_code);
+		break;
+	default:
+		snprintf(buf, sizeof(buf), "UNKNOWN%1d", hw_code);
+		break;
+	}
+
+	env_set("dhcom", buf);
+
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: DHCOM i.MX6\n");
+	return 0;
+}
diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
new file mode 100644
index 0000000000..e22ff5c8c6
--- /dev/null
+++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
@@ -0,0 +1,399 @@
+/*
+ * DHCOM DH-iMX6 PDK SPL support
+ *
+ * Copyright (C) 2017 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <fuse.h>
+#include <fsl_esdhc.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <spl.h>
+
+#define ENET_PAD_CTRL							\
+	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |	\
+	 PAD_CTL_HYS)
+
+#define GPIO_PAD_CTRL							\
+	(PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
+
+#define SPI_PAD_CTRL							\
+	(PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |		\
+	PAD_CTL_SRE_FAST)
+
+#define UART_PAD_CTRL							\
+	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |	\
+	 PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL							\
+	(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |	\
+	 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct mx6dq_iomux_ddr_regs dhcom6dq_ddr_ioregs = {
+	.dram_sdclk_0	= 0x00020030,
+	.dram_sdclk_1	= 0x00020030,
+	.dram_cas	= 0x00020030,
+	.dram_ras	= 0x00020030,
+	.dram_reset	= 0x00020030,
+	.dram_sdcke0	= 0x00003000,
+	.dram_sdcke1	= 0x00003000,
+	.dram_sdba2	= 0x00000000,
+	.dram_sdodt0	= 0x00003030,
+	.dram_sdodt1	= 0x00003030,
+	.dram_sdqs0	= 0x00000030,
+	.dram_sdqs1	= 0x00000030,
+	.dram_sdqs2	= 0x00000030,
+	.dram_sdqs3	= 0x00000030,
+	.dram_sdqs4	= 0x00000030,
+	.dram_sdqs5	= 0x00000030,
+	.dram_sdqs6	= 0x00000030,
+	.dram_sdqs7	= 0x00000030,
+	.dram_dqm0	= 0x00020030,
+	.dram_dqm1	= 0x00020030,
+	.dram_dqm2	= 0x00020030,
+	.dram_dqm3	= 0x00020030,
+	.dram_dqm4	= 0x00020030,
+	.dram_dqm5	= 0x00020030,
+	.dram_dqm6	= 0x00020030,
+	.dram_dqm7	= 0x00020030,
+};
+
+static const struct mx6dq_iomux_grp_regs dhcom6dq_grp_ioregs = {
+	.grp_ddr_type	= 0x000C0000,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_ddrpke	= 0x00000000,
+	.grp_addds	= 0x00000030,
+	.grp_ctlds	= 0x00000030,
+	.grp_ddrmode	= 0x00020000,
+	.grp_b0ds	= 0x00000030,
+	.grp_b1ds	= 0x00000030,
+	.grp_b2ds	= 0x00000030,
+	.grp_b3ds	= 0x00000030,
+	.grp_b4ds	= 0x00000030,
+	.grp_b5ds	= 0x00000030,
+	.grp_b6ds	= 0x00000030,
+	.grp_b7ds	= 0x00000030,
+};
+
+static const struct mx6sdl_iomux_ddr_regs dhcom6sdl_ddr_ioregs = {
+	.dram_sdclk_0	= 0x00020030,
+	.dram_sdclk_1	= 0x00020030,
+	.dram_cas	= 0x00020030,
+	.dram_ras	= 0x00020030,
+	.dram_reset	= 0x00020030,
+	.dram_sdcke0	= 0x00003000,
+	.dram_sdcke1	= 0x00003000,
+	.dram_sdba2	= 0x00000000,
+	.dram_sdodt0	= 0x00003030,
+	.dram_sdodt1	= 0x00003030,
+	.dram_sdqs0	= 0x00000030,
+	.dram_sdqs1	= 0x00000030,
+	.dram_sdqs2	= 0x00000030,
+	.dram_sdqs3	= 0x00000030,
+	.dram_sdqs4	= 0x00000030,
+	.dram_sdqs5	= 0x00000030,
+	.dram_sdqs6	= 0x00000030,
+	.dram_sdqs7	= 0x00000030,
+	.dram_dqm0	= 0x00020030,
+	.dram_dqm1	= 0x00020030,
+	.dram_dqm2	= 0x00020030,
+	.dram_dqm3	= 0x00020030,
+	.dram_dqm4	= 0x00020030,
+	.dram_dqm5	= 0x00020030,
+	.dram_dqm6	= 0x00020030,
+	.dram_dqm7	= 0x00020030,
+};
+
+static const struct mx6sdl_iomux_grp_regs dhcom6sdl_grp_ioregs = {
+	.grp_ddr_type	= 0x000C0000,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_ddrpke	= 0x00000000,
+	.grp_addds	= 0x00000030,
+	.grp_ctlds	= 0x00000030,
+	.grp_ddrmode	= 0x00020000,
+	.grp_b0ds	= 0x00000030,
+	.grp_b1ds	= 0x00000030,
+	.grp_b2ds	= 0x00000030,
+	.grp_b3ds	= 0x00000030,
+	.grp_b4ds	= 0x00000030,
+	.grp_b5ds	= 0x00000030,
+	.grp_b6ds	= 0x00000030,
+	.grp_b7ds	= 0x00000030,
+};
+
+static const struct mx6_mmdc_calibration dhcom_mmdc_calib = {
+	.p0_mpwldectrl0	= 0x001F001F,
+	.p0_mpwldectrl1	= 0x001F001F,
+	.p1_mpwldectrl0	= 0x00440044,
+	.p1_mpwldectrl1	= 0x00440044,
+	.p0_mpdgctrl0	= 0x434B0350,
+	.p0_mpdgctrl1	= 0x034C0359,
+	.p1_mpdgctrl0	= 0x434B0350,
+	.p1_mpdgctrl1	= 0x03650348,
+	.p0_mprddlctl	= 0x4436383B,
+	.p1_mprddlctl	= 0x39393341,
+	.p0_mpwrdlctl	= 0x35373933,
+	.p1_mpwrdlctl	= 0x48254A36,
+};
+
+static const struct mx6_ddr3_cfg dhcom_mem_ddr = {
+	.mem_speed	= 1600,
+	.density	= 4,
+	.width		= 64,
+	.banks		= 8,
+	.rowaddr	= 14,
+	.coladdr	= 10,
+	.pagesz		= 2,
+	.trcd		= 1375,
+	.trcmin		= 4875,
+	.trasmin	= 3500,
+};
+
+static const struct mx6_ddr_sysinfo dhcom_ddr_info = {
+	/* width of data bus:0=16,1=32,2=64 */
+	.dsize		= 2,
+	/* config for full 4GB range so that get_mem_size() works */
+	.cs_density	= 32,	/* 32Gb per CS */
+	.ncs		= 1,	/* single chip select */
+	.cs1_mirror	= 0,
+	.rtt_wr		= 1,	/* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
+	.rtt_nom	= 1,	/* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
+	.walat		= 1,	/* Write additional latency */
+	.ralat		= 5,	/* Read additional latency */
+	.mif3_mode	= 3,	/* Command prediction working mode */
+	.bi_on		= 1,	/* Bank interleaving enabled */
+	.sde_to_rst	= 0x10,	/* 14 cycles, 200us (JEDEC default) */
+	.rst_to_cke	= 0x23,	/* 33 cycles, 500us (JEDEC default) */
+};
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0x00C03F3F, &ccm->CCGR0);
+	writel(0x0030FC03, &ccm->CCGR1);
+	writel(0x0FFFC000, &ccm->CCGR2);
+	writel(0x3FF00000, &ccm->CCGR3);
+	writel(0x00FFF300, &ccm->CCGR4);
+	writel(0x0F0000C3, &ccm->CCGR5);
+	writel(0x000003FF, &ccm->CCGR6);
+}
+
+/* Board ID */
+static iomux_v3_cfg_t const hwcode_pads[] = {
+	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+};
+
+static void setup_iomux_boardid(void)
+{
+	/* HW code pins: Setup alternate function and configure pads */
+	SETUP_IOMUX_PADS(hwcode_pads);
+}
+
+/* GPIO */
+static iomux_v3_cfg_t const gpio_pads[] = {
+	IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_CSI0_DAT17__GPIO6_IO03	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_DI0_PIN4__GPIO4_IO20	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D27__GPIO3_IO27	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_CSI0_MCLK__GPIO5_IO19	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
+};
+
+static void setup_iomux_gpio(void)
+{
+	SETUP_IOMUX_PADS(gpio_pads);
+}
+
+/* Ethernet */
+static iomux_v3_cfg_t const enet_pads[] = {
+	IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_MDC__ENET_MDC	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_RX_ER__ENET_RX_ER	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	/* SMSC PHY Reset */
+	IOMUX_PADS(PAD_EIM_WAIT__GPIO5_IO00	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+	/* ENET_VIO_GPIO */
+	IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+	/* ENET_Interrupt - (not used) */
+	IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static void setup_iomux_enet(void)
+{
+	SETUP_IOMUX_PADS(enet_pads);
+}
+
+/* SD interface */
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+	IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_CLK__SD2_CLK		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD2_CMD__SD2_CMD		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16	| MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
+};
+
+/* onboard microSD */
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_RST__GPIO7_IO08	| MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
+};
+
+/* eMMC */
+static iomux_v3_cfg_t const usdhc4_pads[] = {
+	IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_CLK__SD4_CLK		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_CMD__SD4_CMD		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+};
+
+/* SD */
+static void setup_iomux_sd(void)
+{
+	SETUP_IOMUX_PADS(usdhc2_pads);
+	SETUP_IOMUX_PADS(usdhc3_pads);
+	SETUP_IOMUX_PADS(usdhc4_pads);
+}
+
+/* SPI */
+static iomux_v3_cfg_t const ecspi1_pads[] = {
+	/* SS0 */
+	IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
+};
+
+static void setup_iomux_spi(void)
+{
+	SETUP_IOMUX_PADS(ecspi1_pads);
+}
+
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	if (bus == 0 && cs == 0)
+		return IMX_GPIO_NR(2, 30);
+	else
+		return -1;
+}
+
+/* UART */
+static iomux_v3_cfg_t const uart1_pads[] = {
+	IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA	| MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA	| MUX_PAD_CTRL(UART_PAD_CTRL)),
+};
+
+static void setup_iomux_uart(void)
+{
+	SETUP_IOMUX_PADS(uart1_pads);
+}
+
+/* USB */
+static iomux_v3_cfg_t const usb_pads[] = {
+	IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31	| MUX_PAD_CTRL(NO_PAD_CTRL)),
+};
+
+static void setup_iomux_usb(void)
+{
+	SETUP_IOMUX_PADS(usb_pads);
+}
+
+void board_init_f(ulong dummy)
+{
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	ccgr_init();
+	gpr_init();
+
+	/* setup GP timer */
+	timer_init();
+
+	setup_iomux_boardid();
+	setup_iomux_gpio();
+	setup_iomux_enet();
+	setup_iomux_sd();
+	setup_iomux_spi();
+	setup_iomux_uart();
+	setup_iomux_usb();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* Start the DDR DRAM */
+	if (is_mx6dq())
+		mx6dq_dram_iocfg(dhcom_mem_ddr.width, &dhcom6dq_ddr_ioregs,
+				 &dhcom6dq_grp_ioregs);
+	else
+		mx6sdl_dram_iocfg(dhcom_mem_ddr.width, &dhcom6sdl_ddr_ioregs,
+				  &dhcom6sdl_grp_ioregs);
+	mx6_dram_cfg(&dhcom_ddr_info, &dhcom_mmdc_calib, &dhcom_mem_ddr);
+
+	/* Perform DDR DRAM calibration */
+	udelay(100);
+	mmdc_do_write_level_calibration(&dhcom_ddr_info);
+	mmdc_do_dqs_calibration(&dhcom_ddr_info);
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	/* load/boot image from boot device */
+	board_init_r(NULL, 0);
+}
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
new file mode 100644
index 0000000000..5125260ee4
--- /dev/null
+++ b/configs/dh_imx6_defconfig
@@ -0,0 +1,51 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_MX6_DDRCAL=y
+CONFIG_TARGET_DHCOMIMX6=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6QDL"
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SPL=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_UNZIP=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SATA=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
new file mode 100644
index 0000000000..0595f60e32
--- /dev/null
+++ b/include/configs/dh_imx6.h
@@ -0,0 +1,191 @@
+/*
+ * DHCOM DH-iMX6 PDK board configuration
+ *
+ * Copyright (C) 2017 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __DH_IMX6_CONFIG_H
+#define __DH_IMX6_CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+#include <config_distro_defaults.h>
+#include "mx6_common.h"
+
+/*
+ * SPI NOR layout:
+ * 0x00_0000-0x00_ffff ... U-Boot SPL
+ * 0x01_0000-0x0f_ffff ... U-Boot
+ * 0x10_0000-0x10_ffff ... U-Boot env #1
+ * 0x11_0000-0x11_ffff ... U-Boot env #2
+ * 0x12_0000-0x1f_ffff ... UNUSED
+ */
+
+/* SPL */
+#include "imx6_spl.h"			/* common IMX6 SPL configuration */
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x11400
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.imx"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SUPPORT_RAW_INITRD	/* bootz raw initrd support */
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_BZIP2
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(4 * SZ_1M)
+
+/* Bootcounter */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_BOOTCOUNT_BE
+
+/* FEC ethernet */
+#define CONFIG_MII
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_ETHPRIME			"FEC"
+#define CONFIG_FEC_MXC_PHYADDR		0
+#define CONFIG_ARP_TIMEOUT		200UL
+
+/* Fuses */
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* GPIO */
+#define CONFIG_MXC_GPIO
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+#define CONFIG_SYS_MMC_ENV_DEV		2 /* 1 = SDHC3, 2 = SDHC4 (eMMC) */
+
+/* SATA Configs */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_DWC_AHSATA_PORT_ID	0
+#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
+/* SPI Flash Configs */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		25000000
+#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
+#endif
+
+/* UART */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2 /* Enabled USB controller number */
+#endif
+
+/* Watchdog */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_IMX_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS	60000
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SYS_TEXT_BASE		0x17800000
+#define CONFIG_LOADADDR			0x12000000
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"console=ttymxc0,115200\0"	\
+	"fdt_addr=0x18000000\0"		\
+	"fdt_high=0xffffffff\0"		\
+	"initrd_high=0xffffffff\0"	\
+	"kernel_addr_r=0x10008000\0"	\
+	"fdt_addr_r=0x13000000\0"	\
+	"ramdisk_addr_r=0x18000000\0"	\
+	"scriptaddr=0x14000000\0"	\
+	"fdtfile=imx6q-dhcom-pdk2.dtb\0"\
+	BOOTENV
+
+#define CONFIG_BOOTCOMMAND		"run distro_bootcmd"
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 2) \
+	func(USB, usb, 1) \
+	func(SATA, sata, 0) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_MEMTEST_END		0x20000000
+#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
+
+/* Environment */
+#define CONFIG_ENV_SIZE			(16 * 1024)
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+
+#if defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_OFFSET		(1024 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
+#define CONFIG_ENV_OFFSET_REDUND	\
+	(CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+#endif
+
+#endif	/* __DH_IMX6_CONFIG_H */
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 7+ messages in thread