* [PATCH v2 2/5] ARM: dts: msm8974-FP2: Introduce gpio-keys nodes
2017-10-11 11:02 [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Luca Weiss
@ 2017-10-11 11:02 ` Luca Weiss
2017-10-11 17:12 ` Bjorn Andersson
2017-10-11 11:02 ` [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2 Luca Weiss
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Luca Weiss @ 2017-10-11 11:02 UTC (permalink / raw)
To: linux-arm-msm; +Cc: Luca Weiss
This introduces the gpio-keys nodes for keys of the FP2 and the
associated pinctrl state.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 50 ++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 79a5aa8b856a..9332c6e9c535 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -1,6 +1,10 @@
#include "qcom-msm8974.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
/ {
model = "Fairphone 2";
@@ -13,6 +17,38 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
};
&soc {
@@ -20,3 +56,17 @@
status = "ok";
};
};
+
+&spmi_bus {
+ pm8941@0 {
+ gpios@c000 {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio1", "gpio2", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+ };
+ };
+};
--
2.14.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v2 2/5] ARM: dts: msm8974-FP2: Introduce gpio-keys nodes
2017-10-11 11:02 ` [PATCH v2 2/5] ARM: dts: msm8974-FP2: Introduce gpio-keys nodes Luca Weiss
@ 2017-10-11 17:12 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2017-10-11 17:12 UTC (permalink / raw)
To: Luca Weiss; +Cc: linux-arm-msm
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote:
> This introduces the gpio-keys nodes for keys of the FP2 and the
> associated pinctrl state.
>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 50 ++++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> index 79a5aa8b856a..9332c6e9c535 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -1,6 +1,10 @@
> #include "qcom-msm8974.dtsi"
> #include "qcom-pm8841.dtsi"
> #include "qcom-pm8941.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +
>
> / {
> model = "Fairphone 2";
> @@ -13,6 +17,38 @@
> chosen {
> stdout-path = "serial0:115200n8";
> };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + input-name = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys_pin_a>;
> +
> + camera-snapshot {
> + label = "camera_snapshot";
> + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_CAMERA>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> +
> + volume-down {
> + label = "volume_down";
> + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> +
> + volume-up {
> + label = "volume_up";
> + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> + };
> };
>
> &soc {
> @@ -20,3 +56,17 @@
> status = "ok";
> };
> };
> +
> +&spmi_bus {
> + pm8941@0 {
> + gpios@c000 {
> + gpio_keys_pin_a: gpio-keys-active {
> + pins = "gpio1", "gpio2", "gpio5";
> + function = "normal";
> +
> + bias-pull-up;
> + power-source = <PM8941_GPIO_S3>;
> + };
> + };
> + };
> +};
> --
> 2.14.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2
2017-10-11 11:02 [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Luca Weiss
2017-10-11 11:02 ` [PATCH v2 2/5] ARM: dts: msm8974-FP2: Introduce gpio-keys nodes Luca Weiss
@ 2017-10-11 11:02 ` Luca Weiss
2017-10-11 17:20 ` Bjorn Andersson
2017-10-11 11:02 ` [PATCH v2 4/5] ARM: dts: msm8974-FP2: Add sdhci1 node Luca Weiss
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Luca Weiss @ 2017-10-11 11:02 UTC (permalink / raw)
To: linux-arm-msm; +Cc: Luca Weiss
The voltages are pulled from the vendor source tree.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 195 +++++++++++++++++++++++
1 file changed, 195 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 9332c6e9c535..6dd553a61ae6 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -49,6 +49,201 @@
debounce-interval = <15>;
};
};
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8841-regulators {
+ s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
};
&soc {
--
2.14.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2
2017-10-11 11:02 ` [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2 Luca Weiss
@ 2017-10-11 17:20 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2017-10-11 17:20 UTC (permalink / raw)
To: Luca Weiss; +Cc: linux-arm-msm
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote:
> The voltages are pulled from the vendor source tree.
>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 195 +++++++++++++++++++++++
> 1 file changed, 195 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> index 9332c6e9c535..6dd553a61ae6 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -49,6 +49,201 @@
> debounce-interval = <15>;
> };
> };
> +
> + smd {
> + rpm {
> + rpm_requests {
> + pm8841-regulators {
> + s1 {
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + };
> + };
> +
> + pm8941-regulators {
> + vdd_l1_l3-supply = <&pm8941_s1>;
> + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
> + vdd_l4_l11-supply = <&pm8941_s1>;
> + vdd_l5_l7-supply = <&pm8941_s2>;
> + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
> + vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
> + vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
> + vdd_l21-supply = <&vreg_boost>;
> +
> + s1 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + s2 {
> + regulator-min-microvolt = <2150000>;
> + regulator-max-microvolt = <2150000>;
> +
> + regulator-boot-on;
> + };
> +
> + s3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l3 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-boot-on;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1350000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l19 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <3350000>;
> + };
> +
> + l20 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l21 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> +
> + regulator-boot-on;
> + };
> +
> + l22 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l23 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + l24 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> +
> + regulator-boot-on;
> + };
> + };
> + };
> + };
> + };
> };
>
> &soc {
> --
> 2.14.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 4/5] ARM: dts: msm8974-FP2: Add sdhci1 node
2017-10-11 11:02 [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Luca Weiss
2017-10-11 11:02 ` [PATCH v2 2/5] ARM: dts: msm8974-FP2: Introduce gpio-keys nodes Luca Weiss
2017-10-11 11:02 ` [PATCH v2 3/5] ARM: dts: msm8974-FP2: Add regulator nodes for FP2 Luca Weiss
@ 2017-10-11 11:02 ` Luca Weiss
2017-10-11 17:20 ` Bjorn Andersson
2017-10-11 11:02 ` [PATCH v2 5/5] ARM: dts: msm8974-FP2: Add USB node Luca Weiss
2017-10-11 17:11 ` [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Bjorn Andersson
4 siblings, 1 reply; 10+ messages in thread
From: Luca Weiss @ 2017-10-11 11:02 UTC (permalink / raw)
To: linux-arm-msm; +Cc: Luca Weiss
This introduces the eMMC sdhci node and its pinctrl state
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 29 ++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 6dd553a61ae6..c42e70d7158f 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -250,6 +250,35 @@
serial@f991e000 {
status = "ok";
};
+
+ pinctrl@fd510000 {
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+ };
+
+ sdhci@f9824900 {
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+ };
};
&spmi_bus {
--
2.14.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v2 4/5] ARM: dts: msm8974-FP2: Add sdhci1 node
2017-10-11 11:02 ` [PATCH v2 4/5] ARM: dts: msm8974-FP2: Add sdhci1 node Luca Weiss
@ 2017-10-11 17:20 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2017-10-11 17:20 UTC (permalink / raw)
To: Luca Weiss; +Cc: linux-arm-msm
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote:
> This introduces the eMMC sdhci node and its pinctrl state
>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 29 ++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> index 6dd553a61ae6..c42e70d7158f 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -250,6 +250,35 @@
> serial@f991e000 {
> status = "ok";
> };
> +
> + pinctrl@fd510000 {
> + sdhc1_pin_a: sdhc1-pin-active {
> + clk {
> + pins = "sdc1_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + cmd-data {
> + pins = "sdc1_cmd", "sdc1_data";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> + };
> + };
> +
> + sdhci@f9824900 {
> + status = "ok";
> +
> + vmmc-supply = <&pm8941_l20>;
> + vqmmc-supply = <&pm8941_s3>;
> +
> + bus-width = <8>;
> + non-removable;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdhc1_pin_a>;
> + };
> };
>
> &spmi_bus {
> --
> 2.14.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 5/5] ARM: dts: msm8974-FP2: Add USB node
2017-10-11 11:02 [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Luca Weiss
` (2 preceding siblings ...)
2017-10-11 11:02 ` [PATCH v2 4/5] ARM: dts: msm8974-FP2: Add sdhci1 node Luca Weiss
@ 2017-10-11 11:02 ` Luca Weiss
2017-10-11 17:21 ` Bjorn Andersson
2017-10-11 17:11 ` [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Bjorn Andersson
4 siblings, 1 reply; 10+ messages in thread
From: Luca Weiss @ 2017-10-11 11:02 UTC (permalink / raw)
To: linux-arm-msm; +Cc: Luca Weiss
This introduces the usb node which can be used e.g. for USB_ETH
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 25 ++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index c42e70d7158f..d0a5df90b543 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -279,6 +279,31 @@
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_pin_a>;
};
+
+ usb@f9a55000 {
+ status = "ok";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "ok";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+ };
};
&spmi_bus {
--
2.14.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v2 5/5] ARM: dts: msm8974-FP2: Add USB node
2017-10-11 11:02 ` [PATCH v2 5/5] ARM: dts: msm8974-FP2: Add USB node Luca Weiss
@ 2017-10-11 17:21 ` Bjorn Andersson
0 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2017-10-11 17:21 UTC (permalink / raw)
To: Luca Weiss; +Cc: linux-arm-msm
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote:
> This introduces the usb node which can be used e.g. for USB_ETH
>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 25 ++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> index c42e70d7158f..d0a5df90b543 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -279,6 +279,31 @@
> pinctrl-names = "default";
> pinctrl-0 = <&sdhc1_pin_a>;
> };
> +
> + usb@f9a55000 {
> + status = "ok";
> +
> + phys = <&usb_hs1_phy>;
> + phy-select = <&tcsr 0xb000 0>;
> + extcon = <&smbb>, <&usb_id>;
> + vbus-supply = <&chg_otg>;
> +
> + hnp-disable;
> + srp-disable;
> + adp-disable;
> +
> + ulpi {
> + phy@a {
> + status = "ok";
> +
> + v1p8-supply = <&pm8941_l6>;
> + v3p3-supply = <&pm8941_l24>;
> +
> + extcon = <&smbb>;
> + qcom,init-seq = /bits/ 8 <0x1 0x64>;
> + };
> + };
> + };
> };
>
> &spmi_bus {
> --
> 2.14.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone
2017-10-11 11:02 [PATCH v2 1/5] ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone Luca Weiss
` (3 preceding siblings ...)
2017-10-11 11:02 ` [PATCH v2 5/5] ARM: dts: msm8974-FP2: Add USB node Luca Weiss
@ 2017-10-11 17:11 ` Bjorn Andersson
4 siblings, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2017-10-11 17:11 UTC (permalink / raw)
To: Luca Weiss; +Cc: linux-arm-msm
On Wed 11 Oct 04:02 PDT 2017, Luca Weiss wrote:
> This DTS has support for the Fairphone 2 (codenamed FP2).
> This first version of the DTS supports just the serial console via the MSM UART
> pins.
>
When resubmitting patches that has received acceptance please include
these lines here; so I know I don't have to review this again and that I
don't have to answer it again.
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 22 ++++++++++++++++++++++
> 3 files changed, 24 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 69183f0fbc78..d5e423cad16a 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -113,6 +113,7 @@ everspin Everspin Technologies, Inc.
> exar Exar Corporation
> excito Excito
> ezchip EZchip Semiconductor
> +fairphone Fairphone B.V.
> faraday Faraday Technology Corporation
> fcs Fairchild Semiconductor
> firefly Firefly
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index faf46abaa4a2..549afb6ed13c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -700,6 +700,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-ipq8064-ap148.dtb \
> qcom-msm8660-surf.dtb \
> qcom-msm8960-cdp.dtb \
> + qcom-msm8974-fairphone-fp2.dtb \
> qcom-msm8974-lge-nexus5-hammerhead.dtb \
> qcom-msm8974-sony-xperia-honami.dtb \
> qcom-mdm9615-wp8548-mangoh-green.dtb
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> new file mode 100644
> index 000000000000..79a5aa8b856a
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -0,0 +1,22 @@
> +#include "qcom-msm8974.dtsi"
> +#include "qcom-pm8841.dtsi"
> +#include "qcom-pm8941.dtsi"
> +
> +/ {
> + model = "Fairphone 2";
> + compatible = "fairphone,fp2", "qcom,msm8974";
> +
> + aliases {
> + serial0 = &blsp1_uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&soc {
> + serial@f991e000 {
> + status = "ok";
> + };
> +};
> --
> 2.14.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread