From: Mel Gorman <mgorman@techsingularity.net>
To: Linux-MM <linux-mm@kvack.org>
Cc: Linux-FSDevel <linux-fsdevel@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>, Jan Kara <jack@suse.cz>,
Andi Kleen <ak@linux.intel.com>,
Dave Hansen <dave.hansen@intel.com>,
Dave Chinner <david@fromorbit.com>,
Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 0/8] Follow-up for speed up page cache truncation
Date: Thu, 12 Oct 2017 10:30:55 +0100 [thread overview]
Message-ID: <20171012093103.13412-1-mgorman@techsingularity.net> (raw)
(cc'ing those that reviewed Jan's series as this series is on top)
This series is a follow-on for Jan Kara's series "Speed up page cache
truncation" series. We both ended up looking at the same problem but saw
different problems based on the same data. This series builds upon his
work. The performance comparisons use 4.14-rc4 + Jan's series as a baseline.
A variety of workloads were compared on four separate machines but each
machine showed gains albeit at different levels. Minimally, some of the
differences are due to NUMA where truncating data from a remote node is
slower than a local node. The workloads checked were
o sparse truncate microbenchmark, tiny
o sparse truncate microbenchmark, large
o reaim-io disk workfile
o dbench4 (modified by mmtests to produce more stable results)
o filebench varmail configuration for small memory size
o bonnie, directory operations, working set size 2*RAM
reaim-io, dbench and filebench all showed minor gains. Truncation does not
dominate those workloads but were tested to ensure no other regressions.
They will not be reported further.
The sparse truncate microbench was written by Jan. It creates a number of
files and then times how long it takes to truncate each one. The "tiny"
configuraiton creates a number of files that easily fits in memory and
times how long it takes to truncate files with page cache. The large
configuration uses enough files to have data that is twice the size of
memory and so timings there include truncating page cache and working set
shadow entries in the radix tree.
Patches 1-4 are the most relevant parts of this series. Patches 5-8 are
optional as they are deleting code that is essentially useless but has a
negligible performance impact.
The changelogs have more information on performance but just for bonnie
delete options, the main comparison is
bonnie
4.14.0-rc4 4.14.0-rc4 4.14.0-rc4
janbatch-v1r1 vanilla nocold-v1r1
Hmean SeqCreate del 24963.95 ( 0.00%) 21313.45 ( -14.62%) 26842.24 ( 7.52%)
Hmean RandCreate del 23377.66 ( 0.00%) 19974.03 ( -14.56%) 25262.42 ( 8.06%)
Jan's series is the baseline and the vanilla kernel is 14% slower where
as this series on top gains another 7-8%.
arch/powerpc/mm/mmu_context_book3s64.c | 2 +-
arch/powerpc/mm/pgtable_64.c | 2 +-
arch/sparc/mm/init_64.c | 2 +-
arch/tile/mm/homecache.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 6 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
drivers/gpu/drm/etnaviv/etnaviv_gem.c | 6 +-
drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 4 +-
drivers/gpu/drm/radeon/radeon_ttm.c | 2 +-
drivers/net/ethernet/amazon/ena/ena_netdev.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-desc.c | 2 +-
drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 3 +-
.../net/ethernet/cavium/liquidio/octeon_network.h | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 5 +-
.../net/ethernet/netronome/nfp/nfp_net_common.c | 4 +-
drivers/net/ethernet/qlogic/qlge/qlge_main.c | 3 +-
drivers/net/ethernet/sfc/falcon/rx.c | 2 +-
drivers/net/ethernet/sfc/rx.c | 2 +-
drivers/net/ethernet/synopsys/dwc-xlgmac-desc.c | 2 +-
drivers/net/ethernet/ti/netcp_core.c | 2 +-
drivers/net/virtio_net.c | 1 -
drivers/staging/lustre/lustre/mdc/mdc_request.c | 2 +-
fs/afs/write.c | 4 +-
fs/btrfs/extent_io.c | 4 +-
fs/buffer.c | 4 +-
fs/cachefiles/rdwr.c | 10 +--
fs/ceph/addr.c | 4 +-
fs/dax.c | 2 +-
fs/ext4/file.c | 2 +-
fs/ext4/inode.c | 6 +-
fs/f2fs/checkpoint.c | 2 +-
fs/f2fs/data.c | 2 +-
fs/f2fs/file.c | 2 +-
fs/f2fs/node.c | 8 +-
fs/fscache/page.c | 2 +-
fs/fuse/dev.c | 2 +-
fs/gfs2/aops.c | 2 +-
fs/hugetlbfs/inode.c | 2 +-
fs/nilfs2/btree.c | 2 +-
fs/nilfs2/page.c | 8 +-
fs/nilfs2/segment.c | 4 +-
include/linux/gfp.h | 9 +--
include/linux/pagemap.h | 10 +--
include/linux/pagevec.h | 6 +-
include/linux/skbuff.h | 2 +-
include/linux/slab.h | 3 -
include/linux/swap.h | 13 ++-
include/trace/events/kmem.h | 11 +--
include/trace/events/mmflags.h | 1 -
kernel/power/snapshot.c | 4 +-
mm/filemap.c | 15 ++--
mm/mlock.c | 4 +-
mm/page-writeback.c | 2 +-
mm/page_alloc.c | 89 ++++++++++++---------
mm/percpu-vm.c | 2 +-
mm/rmap.c | 2 +-
mm/shmem.c | 6 +-
mm/swap.c | 15 ++--
mm/swap_state.c | 2 +-
mm/truncate.c | 92 +++++++++++++++-------
mm/vmscan.c | 6 +-
mm/workingset.c | 8 +-
net/core/skbuff.c | 4 +-
tools/perf/builtin-kmem.c | 1 -
66 files changed, 239 insertions(+), 204 deletions(-)
--
2.14.0
WARNING: multiple messages have this Message-ID (diff)
From: Mel Gorman <mgorman@techsingularity.net>
To: Linux-MM <linux-mm@kvack.org>
Cc: Linux-FSDevel <linux-fsdevel@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>, Jan Kara <jack@suse.cz>,
Andi Kleen <ak@linux.intel.com>,
Dave Hansen <dave.hansen@intel.com>,
Dave Chinner <david@fromorbit.com>,
Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 0/8] Follow-up for speed up page cache truncation
Date: Thu, 12 Oct 2017 10:30:55 +0100 [thread overview]
Message-ID: <20171012093103.13412-1-mgorman@techsingularity.net> (raw)
(cc'ing those that reviewed Jan's series as this series is on top)
This series is a follow-on for Jan Kara's series "Speed up page cache
truncation" series. We both ended up looking at the same problem but saw
different problems based on the same data. This series builds upon his
work. The performance comparisons use 4.14-rc4 + Jan's series as a baseline.
A variety of workloads were compared on four separate machines but each
machine showed gains albeit at different levels. Minimally, some of the
differences are due to NUMA where truncating data from a remote node is
slower than a local node. The workloads checked were
o sparse truncate microbenchmark, tiny
o sparse truncate microbenchmark, large
o reaim-io disk workfile
o dbench4 (modified by mmtests to produce more stable results)
o filebench varmail configuration for small memory size
o bonnie, directory operations, working set size 2*RAM
reaim-io, dbench and filebench all showed minor gains. Truncation does not
dominate those workloads but were tested to ensure no other regressions.
They will not be reported further.
The sparse truncate microbench was written by Jan. It creates a number of
files and then times how long it takes to truncate each one. The "tiny"
configuraiton creates a number of files that easily fits in memory and
times how long it takes to truncate files with page cache. The large
configuration uses enough files to have data that is twice the size of
memory and so timings there include truncating page cache and working set
shadow entries in the radix tree.
Patches 1-4 are the most relevant parts of this series. Patches 5-8 are
optional as they are deleting code that is essentially useless but has a
negligible performance impact.
The changelogs have more information on performance but just for bonnie
delete options, the main comparison is
bonnie
4.14.0-rc4 4.14.0-rc4 4.14.0-rc4
janbatch-v1r1 vanilla nocold-v1r1
Hmean SeqCreate del 24963.95 ( 0.00%) 21313.45 ( -14.62%) 26842.24 ( 7.52%)
Hmean RandCreate del 23377.66 ( 0.00%) 19974.03 ( -14.56%) 25262.42 ( 8.06%)
Jan's series is the baseline and the vanilla kernel is 14% slower where
as this series on top gains another 7-8%.
arch/powerpc/mm/mmu_context_book3s64.c | 2 +-
arch/powerpc/mm/pgtable_64.c | 2 +-
arch/sparc/mm/init_64.c | 2 +-
arch/tile/mm/homecache.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 6 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
drivers/gpu/drm/etnaviv/etnaviv_gem.c | 6 +-
drivers/gpu/drm/i915/i915_gem_gtt.c | 2 +-
drivers/gpu/drm/i915/i915_gem_userptr.c | 4 +-
drivers/gpu/drm/radeon/radeon_ttm.c | 2 +-
drivers/net/ethernet/amazon/ena/ena_netdev.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-desc.c | 2 +-
drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 3 +-
.../net/ethernet/cavium/liquidio/octeon_network.h | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 5 +-
.../net/ethernet/netronome/nfp/nfp_net_common.c | 4 +-
drivers/net/ethernet/qlogic/qlge/qlge_main.c | 3 +-
drivers/net/ethernet/sfc/falcon/rx.c | 2 +-
drivers/net/ethernet/sfc/rx.c | 2 +-
drivers/net/ethernet/synopsys/dwc-xlgmac-desc.c | 2 +-
drivers/net/ethernet/ti/netcp_core.c | 2 +-
drivers/net/virtio_net.c | 1 -
drivers/staging/lustre/lustre/mdc/mdc_request.c | 2 +-
fs/afs/write.c | 4 +-
fs/btrfs/extent_io.c | 4 +-
fs/buffer.c | 4 +-
fs/cachefiles/rdwr.c | 10 +--
fs/ceph/addr.c | 4 +-
fs/dax.c | 2 +-
fs/ext4/file.c | 2 +-
fs/ext4/inode.c | 6 +-
fs/f2fs/checkpoint.c | 2 +-
fs/f2fs/data.c | 2 +-
fs/f2fs/file.c | 2 +-
fs/f2fs/node.c | 8 +-
fs/fscache/page.c | 2 +-
fs/fuse/dev.c | 2 +-
fs/gfs2/aops.c | 2 +-
fs/hugetlbfs/inode.c | 2 +-
fs/nilfs2/btree.c | 2 +-
fs/nilfs2/page.c | 8 +-
fs/nilfs2/segment.c | 4 +-
include/linux/gfp.h | 9 +--
include/linux/pagemap.h | 10 +--
include/linux/pagevec.h | 6 +-
include/linux/skbuff.h | 2 +-
include/linux/slab.h | 3 -
include/linux/swap.h | 13 ++-
include/trace/events/kmem.h | 11 +--
include/trace/events/mmflags.h | 1 -
kernel/power/snapshot.c | 4 +-
mm/filemap.c | 15 ++--
mm/mlock.c | 4 +-
mm/page-writeback.c | 2 +-
mm/page_alloc.c | 89 ++++++++++++---------
mm/percpu-vm.c | 2 +-
mm/rmap.c | 2 +-
mm/shmem.c | 6 +-
mm/swap.c | 15 ++--
mm/swap_state.c | 2 +-
mm/truncate.c | 92 +++++++++++++++-------
mm/vmscan.c | 6 +-
mm/workingset.c | 8 +-
net/core/skbuff.c | 4 +-
tools/perf/builtin-kmem.c | 1 -
66 files changed, 239 insertions(+), 204 deletions(-)
--
2.14.0
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2017-10-12 9:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-12 9:30 Mel Gorman [this message]
2017-10-12 9:30 ` [PATCH 0/8] Follow-up for speed up page cache truncation Mel Gorman
2017-10-12 9:30 ` [PATCH 1/8] mm, page_alloc: Enable/disable IRQs once when freeing a list of pages Mel Gorman
2017-10-12 9:30 ` Mel Gorman
2017-10-12 9:30 ` [PATCH 2/8] mm, truncate: Do not check mapping for every page being truncated Mel Gorman
2017-10-12 9:30 ` Mel Gorman
2017-10-12 12:15 ` Jan Kara
2017-10-12 12:15 ` Jan Kara
2017-10-12 12:41 ` Mel Gorman
2017-10-12 12:41 ` Mel Gorman
2017-10-12 19:11 ` Johannes Weiner
2017-10-12 19:11 ` Johannes Weiner
2017-10-12 9:30 ` [PATCH 3/8] mm, truncate: Remove all exceptional entries from pagevec under one lock Mel Gorman
2017-10-12 9:30 ` Mel Gorman
2017-10-12 13:33 ` Jan Kara
2017-10-12 13:33 ` Jan Kara
2017-10-12 14:53 ` Mel Gorman
2017-10-12 14:53 ` Mel Gorman
2017-10-12 19:45 ` Johannes Weiner
2017-10-12 19:45 ` Johannes Weiner
2017-10-12 9:30 ` [PATCH 4/8] mm: Only drain per-cpu pagevecs once per pagevec usage Mel Gorman
2017-10-12 9:30 ` Mel Gorman
2017-10-12 9:31 ` [PATCH 5/8] mm, pagevec: Remove cold parameter for pagevecs Mel Gorman
2017-10-12 9:31 ` Mel Gorman
2017-10-12 9:31 ` [PATCH 6/8] mm: Remove cold parameter for release_pages Mel Gorman
2017-10-12 9:31 ` [PATCH 7/8] mm, Remove cold parameter from free_hot_cold_page* Mel Gorman
2017-10-12 9:31 ` Mel Gorman
2017-10-12 9:31 ` [PATCH 8/8] mm: Remove __GFP_COLD Mel Gorman
2017-10-12 9:31 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171012093103.13412-1-mgorman@techsingularity.net \
--to=mgorman@techsingularity.net \
--cc=ak@linux.intel.com \
--cc=dave.hansen@intel.com \
--cc=david@fromorbit.com \
--cc=jack@suse.cz \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.