All of lore.kernel.org
 help / color / mirror / Atom feed
From: Li Wei <liwei213@huawei.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<xuwei5@hisilicon.com>, <catalin.marinas@arm.com>,
	<will.deacon@arm.com>, <vinholikatti@gmail.com>,
	<jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>,
	<khilman@baylibre.com>, <arnd@arndb.de>,
	<gregory.clement@free-electrons.com>,
	<thomas.petazzoni@free-electrons.com>,
	<yamada.masahiro@socionext.com>, <riku.voipio@linaro.org>,
	<treding@nvidia.com>, <krzk@kernel.org>, <eric@anholt.net>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-scsi@vger.kernel.org>
Cc: <guodong.xu@linaro.org>, <liwei213@huawei.com>,
	<fengbaopeng@hisilicon.com>, <lihuan41@hisilicon.com>,
	<wangyupeng4@hisilicon.com>
Subject: [PATCH v4 3/5] arm64: dts: add ufs dts node
Date: Fri, 13 Oct 2017 15:49:34 +0800	[thread overview]
Message-ID: <20171013074936.97284-4-liwei213@huawei.com> (raw)
In-Reply-To: <20171013074936.97284-1-liwei213@huawei.com>

arm64: dts: add ufs node for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts |  5 +++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 19 +++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index fd4705c451e2..457645a2b53f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -276,3 +276,8 @@
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 	};
 };
+
+&ufs {
+	reset-gpio = <&gpio18 1 0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index b7a90d632959..a24ab8472347 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -978,5 +978,24 @@
 			clocks = <&crg_ctrl HI3660_OSC32K>;
 			clock-names = "apb_pclk";
 		};
+
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "clk_ref", "clk_phy";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			/* offset: 0x84; bit: 7  */
+			resets = <&crg_rst 0x84 12>,
+				<&crg_rst 0x84 7>;
+			reset-names = "rst", "assert";
+		};
 	};
 };
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Li Wei <liwei213@huawei.com>
To: robh+dt@kernel.org, mark.rutland@arm.com, xuwei5@hisilicon.com,
	catalin.marinas@arm.com, will.deacon@arm.com,
	vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
	martin.petersen@oracle.com, khilman@baylibre.com, arnd@arndb.de,
	gregory.clement@free-electrons.com,
	thomas.petazzoni@free-electrons.com,
	yamada.masahiro@socionext.com, riku.voipio@linaro.org,
	treding@nvidia.com, krzk@kernel.org, eric@anholt.net,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-scsi@vger.kernel.org
Cc: guodong.xu@linaro.org, liwei213@huawei.com,
	fengbaopeng@hisilicon.com, lihuan41@hisilicon.com,
	wangyupeng4@hisilicon.com
Subject: [PATCH v4 3/5] arm64: dts: add ufs dts node
Date: Fri, 13 Oct 2017 15:49:34 +0800	[thread overview]
Message-ID: <20171013074936.97284-4-liwei213@huawei.com> (raw)
In-Reply-To: <20171013074936.97284-1-liwei213@huawei.com>

arm64: dts: add ufs node for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts |  5 +++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 19 +++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index fd4705c451e2..457645a2b53f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -276,3 +276,8 @@
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 	};
 };
+
+&ufs {
+	reset-gpio = <&gpio18 1 0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index b7a90d632959..a24ab8472347 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -978,5 +978,24 @@
 			clocks = <&crg_ctrl HI3660_OSC32K>;
 			clock-names = "apb_pclk";
 		};
+
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "clk_ref", "clk_phy";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			/* offset: 0x84; bit: 7  */
+			resets = <&crg_rst 0x84 12>,
+				<&crg_rst 0x84 7>;
+			reset-names = "rst", "assert";
+		};
 	};
 };
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: liwei213@huawei.com (Li Wei)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/5] arm64: dts: add ufs dts node
Date: Fri, 13 Oct 2017 15:49:34 +0800	[thread overview]
Message-ID: <20171013074936.97284-4-liwei213@huawei.com> (raw)
In-Reply-To: <20171013074936.97284-1-liwei213@huawei.com>

arm64: dts: add ufs node for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts |  5 +++++
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 19 +++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index fd4705c451e2..457645a2b53f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -276,3 +276,8 @@
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 	};
 };
+
+&ufs {
+	reset-gpio = <&gpio18 1 0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index b7a90d632959..a24ab8472347 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -978,5 +978,24 @@
 			clocks = <&crg_ctrl HI3660_OSC32K>;
 			clock-names = "apb_pclk";
 		};
+
+		ufs: ufs at ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "clk_ref", "clk_phy";
+			freq-table-hz = <0 0>, <0 0>;
+			/* offset: 0x84; bit: 12 */
+			/* offset: 0x84; bit: 7  */
+			resets = <&crg_rst 0x84 12>,
+				<&crg_rst 0x84 7>;
+			reset-names = "rst", "assert";
+		};
 	};
 };
-- 
2.11.0

  parent reply	other threads:[~2017-10-13  7:50 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-13  7:49 [PATCH v4 0/5] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC Li Wei
2017-10-13  7:49 ` Li Wei
2017-10-13  7:49 ` Li Wei
2017-10-13  7:49 ` [PATCH v4 1/5] scsi: ufs: add Hisilicon ufs driver code Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-13  7:49 ` [PATCH v4 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-17 21:17   ` Rob Herring
2017-10-17 21:17     ` Rob Herring
2017-10-17 21:17     ` Rob Herring
2017-10-18 10:23     ` 答复: " liwei (CM)
2017-10-18 10:23       ` liwei (CM)
2017-10-13  7:49 ` Li Wei [this message]
2017-10-13  7:49   ` [PATCH v4 3/5] arm64: dts: add ufs dts node Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-13  7:49 ` [PATCH v4 4/5] arm64: defconfig: enable configs for Hisilicon ufs Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-13  7:49 ` [PATCH v4 5/5] arm64: defconfig: enable f2fs and squashfs Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-13  7:49   ` Li Wei
2017-10-20  8:50 [PATCH v4 0/5] scsi: ufs: add ufs driver code for Hisilicon Hi3660 SoC Li Wei
2017-10-20  8:50 ` [PATCH v4 3/5] arm64: dts: add ufs dts node Li Wei
2017-10-20  8:50   ` Li Wei
2017-10-20  8:50   ` Li Wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171013074936.97284-4-liwei213@huawei.com \
    --to=liwei213@huawei.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eric@anholt.net \
    --cc=fengbaopeng@hisilicon.com \
    --cc=gregory.clement@free-electrons.com \
    --cc=guodong.xu@linaro.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=khilman@baylibre.com \
    --cc=krzk@kernel.org \
    --cc=lihuan41@hisilicon.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=martin.petersen@oracle.com \
    --cc=riku.voipio@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@free-electrons.com \
    --cc=treding@nvidia.com \
    --cc=vinholikatti@gmail.com \
    --cc=wangyupeng4@hisilicon.com \
    --cc=will.deacon@arm.com \
    --cc=xuwei5@hisilicon.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.