From: Peter Rosin <peda@axentia.se> To: linux-kernel@vger.kernel.org Cc: Peter Rosin <peda@axentia.se>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Nicolas Ferre <nicolas.ferre@microchip.com>, Alexandre Belloni <alexandre.belloni@free-electrons.com>, Russell King <linux@armlinux.org.uk>, Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-hwmon@vger.kernel.org Subject: [PATCH 2/2] ARM: dts: at91: disable the nxp,se97b SMBUS timeout on the TSE-850 Date: Fri, 13 Oct 2017 11:27:05 +0200 [thread overview] Message-ID: <20171013092705.7038-3-peda@axentia.se> (raw) In-Reply-To: <20171013092705.7038-1-peda@axentia.se> The I2C adapter driver is sometimes slow, causing the SCL line to be stuck low for more than the stipulated SMBUS timeout of 25-35 ms. This causes the client device to give up which in turn causes silent corruption of data. So, disable the SMBUS timeout in the client device. Signed-off-by: Peter Rosin <peda@axentia.se> --- arch/arm/boot/dts/at91-tse850-3.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 5f29010cdbd8..9b82cc8843e1 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -221,6 +221,7 @@ jc42@18 { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x18>; + smbus-timeout-disable; }; dpot: mcp4651-104@28 { -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: peda@axentia.se (Peter Rosin) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/2] ARM: dts: at91: disable the nxp, se97b SMBUS timeout on the TSE-850 Date: Fri, 13 Oct 2017 11:27:05 +0200 [thread overview] Message-ID: <20171013092705.7038-3-peda@axentia.se> (raw) In-Reply-To: <20171013092705.7038-1-peda@axentia.se> The I2C adapter driver is sometimes slow, causing the SCL line to be stuck low for more than the stipulated SMBUS timeout of 25-35 ms. This causes the client device to give up which in turn causes silent corruption of data. So, disable the SMBUS timeout in the client device. Signed-off-by: Peter Rosin <peda@axentia.se> --- arch/arm/boot/dts/at91-tse850-3.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts index 5f29010cdbd8..9b82cc8843e1 100644 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ b/arch/arm/boot/dts/at91-tse850-3.dts @@ -221,6 +221,7 @@ jc42 at 18 { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x18>; + smbus-timeout-disable; }; dpot: mcp4651-104 at 28 { -- 2.11.0
next prev parent reply other threads:[~2017-10-13 9:27 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-13 9:27 [PATCH 0/2] Sluggish AT91 I2C driver causes SMBus timeouts Peter Rosin 2017-10-13 9:27 ` Peter Rosin 2017-10-13 9:27 ` [PATCH 1/2] hwmon: (jc42) optionally try to disable the SMBUS timeout Peter Rosin 2017-10-13 9:27 ` Peter Rosin 2017-10-13 9:27 ` Peter Rosin 2017-10-13 12:51 ` Guenter Roeck 2017-10-13 12:51 ` Guenter Roeck 2017-10-13 13:50 ` Guenter Roeck 2017-10-13 13:50 ` Guenter Roeck 2017-10-13 14:26 ` Peter Rosin 2017-10-13 14:26 ` Peter Rosin 2017-10-13 20:35 ` Guenter Roeck 2017-10-13 20:35 ` Guenter Roeck 2017-10-13 23:44 ` Guenter Roeck 2017-10-13 23:44 ` Guenter Roeck 2017-10-17 22:16 ` Rob Herring 2017-10-17 22:16 ` Rob Herring 2017-10-18 2:38 ` Guenter Roeck 2017-10-18 2:38 ` Guenter Roeck 2017-10-26 6:44 ` Peter Rosin 2017-10-26 6:44 ` Peter Rosin 2017-10-26 6:44 ` Peter Rosin 2017-10-26 13:45 ` Guenter Roeck 2017-10-26 13:45 ` Guenter Roeck 2017-10-26 13:45 ` Guenter Roeck 2017-10-13 9:27 ` Peter Rosin [this message] 2017-10-13 9:27 ` [PATCH 2/2] ARM: dts: at91: disable the nxp, se97b SMBUS timeout on the TSE-850 Peter Rosin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20171013092705.7038-3-peda@axentia.se \ --to=peda@axentia.se \ --cc=alexandre.belloni@free-electrons.com \ --cc=devicetree@vger.kernel.org \ --cc=jdelvare@suse.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=linux@roeck-us.net \ --cc=mark.rutland@arm.com \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.