* [PATCH i-g-t 1/8] tools/intel_vbt_decode: make a copy of child devices before dumping
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 2/8] tools/intel_vbt_decode: update dvo port name dumping Jani Nikula
` (7 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
Take child device size into account, avoid reading past the actual child
device.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_vbt_decode.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index 948dc29dd114..499dcb065745 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -36,6 +36,7 @@
#include <sys/stat.h>
#include <sys/types.h>
+#include "igt_aux.h"
#include "intel_io.h"
#include "intel_chipset.h"
#include "drmtest.h"
@@ -475,6 +476,7 @@ static void dump_general_definitions(struct context *context,
const struct bdb_block *block)
{
const struct bdb_general_definitions *defs = block->data;
+ struct child_device_config *child;
int i;
int child_device_num;
@@ -489,8 +491,22 @@ static void dump_general_definitions(struct context *context,
printf("\tChild device size: %d\n", defs->child_dev_size);
child_device_num = (block->size - sizeof(*defs)) /
defs->child_dev_size;
- for (i = 0; i < child_device_num; i++)
- dump_child_device(context, (const void*)&defs->devices[i * defs->child_dev_size]);
+
+ /*
+ * Use a temp buffer so dump_child_device() doesn't have to worry about
+ * accessing the struct beyond child_dev_size. The tail, if any, remains
+ * initialized to zero.
+ */
+ child = calloc(1, sizeof(*child));
+
+ for (i = 0; i < child_device_num; i++) {
+ memcpy(child, &defs->devices[i * defs->child_dev_size],
+ min(sizeof(*child), defs->child_dev_size));
+
+ dump_child_device(context, child);
+ }
+
+ free(child);
}
static void dump_legacy_child_devices(struct context *context,
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH i-g-t 2/8] tools/intel_vbt_decode: update dvo port name dumping
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 1/8] tools/intel_vbt_decode: make a copy of child devices before dumping Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 3/8] tools/intel_vbt_decode: use %.*s instead of duplicating a string Jani Nikula
` (6 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
Add names for new ports, throw out unused macros.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_bios.h | 12 ------------
tools/intel_vbt_decode.c | 47 +++++++++++++++++++++++++----------------------
2 files changed, 25 insertions(+), 34 deletions(-)
diff --git a/tools/intel_bios.h b/tools/intel_bios.h
index 4e06ef74e459..f0475b5cfcc3 100644
--- a/tools/intel_bios.h
+++ b/tools/intel_bios.h
@@ -42,18 +42,6 @@
#define DEVICE_TYPE_DVI 0x68d2
#define DEVICE_TYPE_MIPI 0x7cc2
-#define DEVICE_PORT_DVOA 0x00 /* none on 845+ */
-#define DEVICE_PORT_DVOB 0x01
-#define DEVICE_PORT_DVOC 0x02
-
-#define DEVICE_PORT_NONE 0
-#define DEVICE_PORT_HDMIB 1
-#define DEVICE_PORT_HDMIC 2
-#define DEVICE_PORT_HDMID 3
-#define DEVICE_PORT_DPB 7
-#define DEVICE_PORT_DPC 8
-#define DEVICE_PORT_DPD 9
-
struct legacy_child_device_config {
uint16_t handle;
uint16_t device_type; /* See DEVICE_TYPE_* above */
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index 499dcb065745..4865f0bab25f 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -356,29 +356,32 @@ static const char *child_device_handle(unsigned char handle)
return "unknown";
}
-static const struct {
- unsigned short type;
- const char *name;
-} efp_ports[] = {
- { DEVICE_PORT_NONE, "N/A" },
- { DEVICE_PORT_HDMIB, "HDMI-B" },
- { DEVICE_PORT_HDMIC, "HDMI-C" },
- { DEVICE_PORT_HDMID, "HDMI-D" },
- { DEVICE_PORT_DPB, "DP-B" },
- { DEVICE_PORT_DPC, "DP-C" },
- { DEVICE_PORT_DPD, "DP-D" },
+static const char *dvo_port_names[] = {
+ [DVO_PORT_HDMIA] = "HDMI-A",
+ [DVO_PORT_HDMIB] = "HDMI-B",
+ [DVO_PORT_HDMIC] = "HDMI-C",
+ [DVO_PORT_HDMID] = "HDMI-D",
+ [DVO_PORT_LVDS] = "LVDS",
+ [DVO_PORT_TV] = "TV",
+ [DVO_PORT_CRT] = "CRT",
+ [DVO_PORT_DPB] = "DP-B",
+ [DVO_PORT_DPC] = "DP-C",
+ [DVO_PORT_DPD] = "DP-D",
+ [DVO_PORT_DPA] = "DP-A",
+ [DVO_PORT_DPE] = "DP-E",
+ [DVO_PORT_HDMIE] = "HDMI-E",
+ [DVO_PORT_MIPIA] = "MIPI-A",
+ [DVO_PORT_MIPIB] = "MIPI-B",
+ [DVO_PORT_MIPIC] = "MIPI-C",
+ [DVO_PORT_MIPID] = "MIPI-D",
};
-static const int num_efp_ports = sizeof(efp_ports) / sizeof(efp_ports[0]);
-static const char *efp_port(uint8_t type)
+static const char *dvo_port(uint8_t type)
{
- int i;
-
- for (i = 0; i < num_efp_ports; i++)
- if (efp_ports[i].type == type)
- return efp_ports[i].name;
-
- return "unknown";
+ if (type < ARRAY_SIZE(dvo_port_names) && dvo_port_names[type])
+ return dvo_port_names[type];
+ else
+ return "unknown";
}
static void dump_child_device(struct context *context,
@@ -418,9 +421,9 @@ static void dump_child_device(struct context *context,
printf("\t\tCompression enable: %s\n", YESNO(efp->compression_enable));
printf("\t\tEdidless EFP: %s\n", YESNO(efp->edidless_efp));
printf("\t\tCompression structure index: 0x%02x)\n", efp->compression_structure_index);
- printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, efp_port(efp->slave_port));
+ printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, dvo_port(efp->slave_port));
printf("\t\tAIM offset: %d\n", child->addin_offset);
- printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, efp_port(efp->dvo_port));
+ printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, dvo_port(efp->dvo_port));
printf("\t\tAIM I2C pin: 0x%02x\n", efp->i2c_pin);
printf("\t\tAIM Slave address: 0x%02x\n", efp->slave_addr);
printf("\t\tDDC pin: 0x%02x\n", efp->ddc_pin);
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH i-g-t 3/8] tools/intel_vbt_decode: use %.*s instead of duplicating a string
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 1/8] tools/intel_vbt_decode: make a copy of child devices before dumping Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 2/8] tools/intel_vbt_decode: update dvo port name dumping Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 4/8] tools/intel_vbt_decode: abstract DSI bridge type dump Jani Nikula
` (5 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
child->device_id may not be terminated, but we can use %.*s format
specifier to define the max length to print. No need to make a copy.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_vbt_decode.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index 4865f0bab25f..0f7e2dafc762 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -388,19 +388,15 @@ static void dump_child_device(struct context *context,
const struct child_device_config *child)
{
const struct child_device_config *efp = child;
- char child_id[11];
if (!child->device_type)
return;
if (context->bdb->version < 152) {
- strncpy(child_id, (const char *)child->device_id, 10);
- child_id[10] = 0;
-
printf("\tChild device info:\n");
printf("\t\tDevice type: %04x (%s)\n", child->device_type,
child_device_type(child->device_type));
- printf("\t\tSignature: %s\n", child_id);
+ printf("\t\tSignature: %.*s\n", (int)sizeof(child->device_id), child->device_id);
printf("\t\tAIM offset: %d\n", child->addin_offset);
printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
} else { /* 152+ have EFP blocks here */
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH i-g-t 4/8] tools/intel_vbt_decode: abstract DSI bridge type dump
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
` (2 preceding siblings ...)
2017-10-19 15:22 ` [PATCH i-g-t 3/8] tools/intel_vbt_decode: use %.*s instead of duplicating a string Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions Jani Nikula
` (4 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
Cleaner than having it inline.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_vbt_decode.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index 0f7e2dafc762..69cf1e4c6cc6 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -384,6 +384,20 @@ static const char *dvo_port(uint8_t type)
return "unknown";
}
+static const char *mipi_bridge_type(uint8_t type)
+{
+ switch (type) {
+ case 1:
+ return "ASUS";
+ case 2:
+ return "Toshiba";
+ case 3:
+ return "Renesas";
+ default:
+ return "unknown";
+ }
+}
+
static void dump_child_device(struct context *context,
const struct child_device_config *child)
{
@@ -440,21 +454,8 @@ static void dump_child_device(struct context *context,
printf("\t\tSDVO stall signal available: %s\n", YESNO(efp->sdvo_stall));
printf("\t\tPipe capabilities: 0x%02x\n", efp->pipe_cap);
printf("\t\tDVO wiring: 0x%02x\n", efp->dvo_wiring);
- printf("\t\tMIPI bridge type:");
- switch (efp->mipi_bridge_type) {
- case 1:
- printf("ASUS\n");
- break;
- case 2:
- printf("Toshiba\n");
- break;
- case 3:
- printf("Renesas\n");
- break;
- default:
- printf("(unknown value %d)\n", efp->mipi_bridge_type);
- break;
- }
+ printf("\t\tMIPI bridge type: %02x (%s)\n", efp->mipi_bridge_type,
+ mipi_bridge_type(efp->mipi_bridge_type));
printf("\t\tDevice class extendsion: 0x%02x\n", efp->extended_type);
printf("\t\tDVO function: 0x%02x\n", efp->dvo_function);
}
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
` (3 preceding siblings ...)
2017-10-19 15:22 ` [PATCH i-g-t 4/8] tools/intel_vbt_decode: abstract DSI bridge type dump Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 17:24 ` Ville Syrjälä
2017-10-19 15:22 ` [PATCH i-g-t 6/8] tools/intel_vbt_decode: unify legacy child device block dumping Jani Nikula
` (3 subsequent siblings)
8 siblings, 1 reply; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
Make it easier to compare dumping against the struct definition.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_vbt_decode.c | 128 ++++++++++++++++++++++++++---------------------
1 file changed, 71 insertions(+), 57 deletions(-)
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index 69cf1e4c6cc6..bc5f38112619 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -401,74 +401,88 @@ static const char *mipi_bridge_type(uint8_t type)
static void dump_child_device(struct context *context,
const struct child_device_config *child)
{
- const struct child_device_config *efp = child;
-
if (!child->device_type)
return;
+ printf("\tChild device info:\n");
+ printf("\t\tDevice handle: 0x%04x (%s)\n", child->handle,
+ child_device_handle(child->handle));
+ printf("\t\tDevice type: 0x%04x (%s)\n", child->device_type,
+ child_device_type(child->device_type));
+ dump_child_device_type_bits(child->device_type);
+
if (context->bdb->version < 152) {
- printf("\tChild device info:\n");
- printf("\t\tDevice type: %04x (%s)\n", child->device_type,
- child_device_type(child->device_type));
printf("\t\tSignature: %.*s\n", (int)sizeof(child->device_id), child->device_id);
- printf("\t\tAIM offset: %d\n", child->addin_offset);
- printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
- } else { /* 152+ have EFP blocks here */
- printf("\tEFP device info:\n");
- printf("\t\tDevice handle: 0x%04x (%s)\n", efp->handle,
- child_device_handle(efp->handle));
- printf("\t\tDevice type: 0x%04x (%s)\n", efp->device_type,
- child_device_type(efp->device_type));
- dump_child_device_type_bits(efp->device_type);
- printf("\t\tI2C speed: 0x%02x\n", efp->i2c_speed);
- printf("\t\tDP onboard redriver: 0x%02x\n", efp->dp_onboard_redriver);
- printf("\t\tDP ondock redriver: 0x%02x\n", efp->dp_ondock_redriver);
- printf("\t\tHDMI max data rate: 0x%02x\n", efp->hdmi_max_data_rate);
- printf("\t\tHDMI level shifter value: 0x%02x\n", efp->hdmi_level_shifter_value);
- printf("\t\tOffset to DTD buffer for edidless EFP: 0x%02x\n", efp->dtd_buf_ptr);
- printf("\t\tDual pipe ganged eDP: %s\n", YESNO(efp->ganged_edp));
- printf("\t\tCompression method CPS: %s\n", YESNO(efp->compression_method));
- printf("\t\tCompression enable: %s\n", YESNO(efp->compression_enable));
- printf("\t\tEdidless EFP: %s\n", YESNO(efp->edidless_efp));
- printf("\t\tCompression structure index: 0x%02x)\n", efp->compression_structure_index);
- printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, dvo_port(efp->slave_port));
- printf("\t\tAIM offset: %d\n", child->addin_offset);
- printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, dvo_port(efp->dvo_port));
- printf("\t\tAIM I2C pin: 0x%02x\n", efp->i2c_pin);
- printf("\t\tAIM Slave address: 0x%02x\n", efp->slave_addr);
- printf("\t\tDDC pin: 0x%02x\n", efp->ddc_pin);
- printf("\t\tEDID buffer ptr: 0x%02x\n", efp->edid_ptr);
- printf("\t\tDVO config: 0x%02x\n", efp->dvo_cfg);
- printf("\t\tHPD sense invert: %s\n", YESNO(efp->hpd_invert));
- printf("\t\tIboost enable: %s\n", YESNO(efp->iboost));
- printf("\t\tOnboard LSPCON: %s\n", YESNO(efp->lspcon));
- printf("\t\tLane reversal: %s\n", YESNO(efp->lane_reversal));
- printf("\t\tEFP routed through dock: %s\n", YESNO(efp->efp_routed));
- printf("\t\tHDMI compatible? %s\n", YESNO(efp->hdmi_support));
- printf("\t\tDP compatible? %s\n", YESNO(efp->dp_support));
- printf("\t\tTMDS compatible? %s\n", YESNO(efp->tmds_support));
- printf("\t\tAux channel: 0x%02x\n", efp->aux_channel);
- printf("\t\tDongle detect: 0x%02x\n", efp->dongle_detect);
- printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(efp->integrated_encoder));
- printf("\t\tHotplu connect status: 0x%02x\n", efp->hpd_status);
- printf("\t\tSDVO stall signal available: %s\n", YESNO(efp->sdvo_stall));
- printf("\t\tPipe capabilities: 0x%02x\n", efp->pipe_cap);
- printf("\t\tDVO wiring: 0x%02x\n", efp->dvo_wiring);
- printf("\t\tMIPI bridge type: %02x (%s)\n", efp->mipi_bridge_type,
- mipi_bridge_type(efp->mipi_bridge_type));
- printf("\t\tDevice class extendsion: 0x%02x\n", efp->extended_type);
- printf("\t\tDVO function: 0x%02x\n", efp->dvo_function);
+ } else {
+ printf("\t\tI2C speed: 0x%02x\n", child->i2c_speed);
+ printf("\t\tDP onboard redriver: 0x%02x\n", child->dp_onboard_redriver);
+ printf("\t\tDP ondock redriver: 0x%02x\n", child->dp_ondock_redriver);
+ printf("\t\tHDMI level shifter value: 0x%02x\n", child->hdmi_level_shifter_value);
+ printf("\t\tHDMI max data rate: 0x%02x\n", child->hdmi_max_data_rate);
+ printf("\t\tOffset to DTD buffer for edidless CHILD: 0x%02x\n", child->dtd_buf_ptr);
+ printf("\t\tEdidless EFP: %s\n", YESNO(child->edidless_efp));
+ printf("\t\tCompression enable: %s\n", YESNO(child->compression_enable));
+ printf("\t\tCompression method CPS: %s\n", YESNO(child->compression_method));
+ printf("\t\tDual pipe ganged eDP: %s\n", YESNO(child->ganged_edp));
+ printf("\t\tCompression structure index: 0x%02x)\n", child->compression_structure_index);
+ printf("\t\tSlave DDI port: 0x%02x (%s)\n", child->slave_port, dvo_port(child->slave_port));
+ }
+
+ printf("\t\tAIM offset: %d\n", child->addin_offset);
+ printf("\t\tDVO Port: 0x%02x (%s)\n", child->dvo_port, dvo_port(child->dvo_port));
+
+ if (context->bdb->version < 152)
+ return;
+
+ printf("\t\tAIM I2C pin: 0x%02x\n", child->i2c_pin);
+ printf("\t\tAIM Slave address: 0x%02x\n", child->slave_addr);
+ printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
+ printf("\t\tEDID buffer ptr: 0x%02x\n", child->edid_ptr);
+ printf("\t\tDVO config: 0x%02x\n", child->dvo_cfg);
+
+ if (context->bdb->version < 158) {
+ printf("\t\tDVO2 Port: 0x%02x (%s)\n", child->dvo2_port, dvo_port(child->dvo2_port));
+ printf("\t\tI2C2 pin: 0x%02x\n", child->i2c2_pin);
+ printf("\t\tSlave2 address: 0x%02x\n", child->slave2_addr);
+ printf("\t\tDDC2 pin: 0x%02x\n", child->ddc2_pin);
+ } else {
+ printf("\t\tEFP routed through dock: %s\n", YESNO(child->efp_routed));
+ printf("\t\tLane reversal: %s\n", YESNO(child->lane_reversal));
+ printf("\t\tOnboard LSPCON: %s\n", YESNO(child->lspcon));
+ printf("\t\tIboost enable: %s\n", YESNO(child->iboost));
+ printf("\t\tHPD sense invert: %s\n", YESNO(child->hpd_invert));
+ printf("\t\tHDMI compatible? %s\n", YESNO(child->hdmi_support));
+ printf("\t\tDP compatible? %s\n", YESNO(child->dp_support));
+ printf("\t\tTMDS compatible? %s\n", YESNO(child->tmds_support));
+ printf("\t\tAux channel: 0x%02x\n", child->aux_channel);
+ printf("\t\tDongle detect: 0x%02x\n", child->dongle_detect);
+ }
+
+ printf("\t\tPipe capabilities: 0x%02x\n", child->pipe_cap);
+ printf("\t\tSDVO stall signal available: %s\n", YESNO(child->sdvo_stall));
+ printf("\t\tHotplu connect status: 0x%02x\n", child->hpd_status);
+ printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(child->integrated_encoder));
+ printf("\t\tDVO wiring: 0x%02x\n", child->dvo_wiring);
+
+ if (context->bdb->version < 171) {
+ printf("\t\tDVO2 wiring: 0x%02x\n", child->dvo2_wiring);
+ } else {
+ printf("\t\tMIPI bridge type: %02x (%s)\n", child->mipi_bridge_type,
+ mipi_bridge_type(child->mipi_bridge_type));
}
+ printf("\t\tDevice class extendsion: 0x%02x\n", child->extended_type);
+ printf("\t\tDVO function: 0x%02x\n", child->dvo_function);
+
if (context->bdb->version >= 195) {
- printf("\t\tDP USB type C support: %s\n", YESNO(efp->dp_usb_type_c));
- printf("\t\t2X DP GPIO index: 0x%02x\n", efp->dp_gpio_index);
- printf("\t\t2X DP GPIO pin number: 0x%02x\n", efp->dp_gpio_pin_num);
+ printf("\t\tDP USB type C support: %s\n", YESNO(child->dp_usb_type_c));
+ printf("\t\t2X DP GPIO index: 0x%02x\n", child->dp_gpio_index);
+ printf("\t\t2X DP GPIO pin number: 0x%02x\n", child->dp_gpio_pin_num);
}
if (context->bdb->version >= 196) {
- printf("\t\tIBoost level for HDMI: 0x%02x\n", efp->hdmi_iboost_level);
- printf("\t\tIBoost level for DP/eDP: 0x%02x\n", efp->dp_iboost_level);
+ printf("\t\tIBoost level for HDMI: 0x%02x\n", child->hdmi_iboost_level);
+ printf("\t\tIBoost level for DP/eDP: 0x%02x\n", child->dp_iboost_level);
}
}
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions
2017-10-19 15:22 ` [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions Jani Nikula
@ 2017-10-19 17:24 ` Ville Syrjälä
2017-10-20 10:56 ` Jani Nikula
0 siblings, 1 reply; 15+ messages in thread
From: Ville Syrjälä @ 2017-10-19 17:24 UTC (permalink / raw)
To: Jani Nikula; +Cc: intel-gfx
On Thu, Oct 19, 2017 at 06:22:56PM +0300, Jani Nikula wrote:
> Make it easier to compare dumping against the struct definition.
>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> tools/intel_vbt_decode.c | 128 ++++++++++++++++++++++++++---------------------
> 1 file changed, 71 insertions(+), 57 deletions(-)
>
> diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
> index 69cf1e4c6cc6..bc5f38112619 100644
> --- a/tools/intel_vbt_decode.c
> +++ b/tools/intel_vbt_decode.c
> @@ -401,74 +401,88 @@ static const char *mipi_bridge_type(uint8_t type)
> static void dump_child_device(struct context *context,
> const struct child_device_config *child)
> {
> - const struct child_device_config *efp = child;
> -
> if (!child->device_type)
> return;
>
> + printf("\tChild device info:\n");
> + printf("\t\tDevice handle: 0x%04x (%s)\n", child->handle,
> + child_device_handle(child->handle));
> + printf("\t\tDevice type: 0x%04x (%s)\n", child->device_type,
> + child_device_type(child->device_type));
> + dump_child_device_type_bits(child->device_type);
> +
> if (context->bdb->version < 152) {
> - printf("\tChild device info:\n");
> - printf("\t\tDevice type: %04x (%s)\n", child->device_type,
> - child_device_type(child->device_type));
> printf("\t\tSignature: %.*s\n", (int)sizeof(child->device_id), child->device_id);
> - printf("\t\tAIM offset: %d\n", child->addin_offset);
> - printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
> - } else { /* 152+ have EFP blocks here */
> - printf("\tEFP device info:\n");
> - printf("\t\tDevice handle: 0x%04x (%s)\n", efp->handle,
> - child_device_handle(efp->handle));
> - printf("\t\tDevice type: 0x%04x (%s)\n", efp->device_type,
> - child_device_type(efp->device_type));
> - dump_child_device_type_bits(efp->device_type);
> - printf("\t\tI2C speed: 0x%02x\n", efp->i2c_speed);
> - printf("\t\tDP onboard redriver: 0x%02x\n", efp->dp_onboard_redriver);
> - printf("\t\tDP ondock redriver: 0x%02x\n", efp->dp_ondock_redriver);
> - printf("\t\tHDMI max data rate: 0x%02x\n", efp->hdmi_max_data_rate);
> - printf("\t\tHDMI level shifter value: 0x%02x\n", efp->hdmi_level_shifter_value);
> - printf("\t\tOffset to DTD buffer for edidless EFP: 0x%02x\n", efp->dtd_buf_ptr);
> - printf("\t\tDual pipe ganged eDP: %s\n", YESNO(efp->ganged_edp));
> - printf("\t\tCompression method CPS: %s\n", YESNO(efp->compression_method));
> - printf("\t\tCompression enable: %s\n", YESNO(efp->compression_enable));
> - printf("\t\tEdidless EFP: %s\n", YESNO(efp->edidless_efp));
> - printf("\t\tCompression structure index: 0x%02x)\n", efp->compression_structure_index);
> - printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, dvo_port(efp->slave_port));
> - printf("\t\tAIM offset: %d\n", child->addin_offset);
> - printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, dvo_port(efp->dvo_port));
> - printf("\t\tAIM I2C pin: 0x%02x\n", efp->i2c_pin);
> - printf("\t\tAIM Slave address: 0x%02x\n", efp->slave_addr);
> - printf("\t\tDDC pin: 0x%02x\n", efp->ddc_pin);
> - printf("\t\tEDID buffer ptr: 0x%02x\n", efp->edid_ptr);
> - printf("\t\tDVO config: 0x%02x\n", efp->dvo_cfg);
> - printf("\t\tHPD sense invert: %s\n", YESNO(efp->hpd_invert));
> - printf("\t\tIboost enable: %s\n", YESNO(efp->iboost));
> - printf("\t\tOnboard LSPCON: %s\n", YESNO(efp->lspcon));
> - printf("\t\tLane reversal: %s\n", YESNO(efp->lane_reversal));
> - printf("\t\tEFP routed through dock: %s\n", YESNO(efp->efp_routed));
> - printf("\t\tHDMI compatible? %s\n", YESNO(efp->hdmi_support));
> - printf("\t\tDP compatible? %s\n", YESNO(efp->dp_support));
> - printf("\t\tTMDS compatible? %s\n", YESNO(efp->tmds_support));
> - printf("\t\tAux channel: 0x%02x\n", efp->aux_channel);
> - printf("\t\tDongle detect: 0x%02x\n", efp->dongle_detect);
> - printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(efp->integrated_encoder));
> - printf("\t\tHotplu connect status: 0x%02x\n", efp->hpd_status);
> - printf("\t\tSDVO stall signal available: %s\n", YESNO(efp->sdvo_stall));
> - printf("\t\tPipe capabilities: 0x%02x\n", efp->pipe_cap);
> - printf("\t\tDVO wiring: 0x%02x\n", efp->dvo_wiring);
> - printf("\t\tMIPI bridge type: %02x (%s)\n", efp->mipi_bridge_type,
> - mipi_bridge_type(efp->mipi_bridge_type));
> - printf("\t\tDevice class extendsion: 0x%02x\n", efp->extended_type);
> - printf("\t\tDVO function: 0x%02x\n", efp->dvo_function);
> + } else {
> + printf("\t\tI2C speed: 0x%02x\n", child->i2c_speed);
> + printf("\t\tDP onboard redriver: 0x%02x\n", child->dp_onboard_redriver);
> + printf("\t\tDP ondock redriver: 0x%02x\n", child->dp_ondock_redriver);
> + printf("\t\tHDMI level shifter value: 0x%02x\n", child->hdmi_level_shifter_value);
> + printf("\t\tHDMI max data rate: 0x%02x\n", child->hdmi_max_data_rate);
> + printf("\t\tOffset to DTD buffer for edidless CHILD: 0x%02x\n", child->dtd_buf_ptr);
> + printf("\t\tEdidless EFP: %s\n", YESNO(child->edidless_efp));
> + printf("\t\tCompression enable: %s\n", YESNO(child->compression_enable));
> + printf("\t\tCompression method CPS: %s\n", YESNO(child->compression_method));
> + printf("\t\tDual pipe ganged eDP: %s\n", YESNO(child->ganged_edp));
> + printf("\t\tCompression structure index: 0x%02x)\n", child->compression_structure_index);
> + printf("\t\tSlave DDI port: 0x%02x (%s)\n", child->slave_port, dvo_port(child->slave_port));
> + }
> +
> + printf("\t\tAIM offset: %d\n", child->addin_offset);
> + printf("\t\tDVO Port: 0x%02x (%s)\n", child->dvo_port, dvo_port(child->dvo_port));
> +
> + if (context->bdb->version < 152)
> + return;
> +
> + printf("\t\tAIM I2C pin: 0x%02x\n", child->i2c_pin);
> + printf("\t\tAIM Slave address: 0x%02x\n", child->slave_addr);
> + printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
> + printf("\t\tEDID buffer ptr: 0x%02x\n", child->edid_ptr);
> + printf("\t\tDVO config: 0x%02x\n", child->dvo_cfg);
> +
> + if (context->bdb->version < 158) {
> + printf("\t\tDVO2 Port: 0x%02x (%s)\n", child->dvo2_port, dvo_port(child->dvo2_port));
> + printf("\t\tI2C2 pin: 0x%02x\n", child->i2c2_pin);
> + printf("\t\tSlave2 address: 0x%02x\n", child->slave2_addr);
> + printf("\t\tDDC2 pin: 0x%02x\n", child->ddc2_pin);
> + } else {
> + printf("\t\tEFP routed through dock: %s\n", YESNO(child->efp_routed));
> + printf("\t\tLane reversal: %s\n", YESNO(child->lane_reversal));
> + printf("\t\tOnboard LSPCON: %s\n", YESNO(child->lspcon));
> + printf("\t\tIboost enable: %s\n", YESNO(child->iboost));
> + printf("\t\tHPD sense invert: %s\n", YESNO(child->hpd_invert));
> + printf("\t\tHDMI compatible? %s\n", YESNO(child->hdmi_support));
> + printf("\t\tDP compatible? %s\n", YESNO(child->dp_support));
> + printf("\t\tTMDS compatible? %s\n", YESNO(child->tmds_support));
> + printf("\t\tAux channel: 0x%02x\n", child->aux_channel);
> + printf("\t\tDongle detect: 0x%02x\n", child->dongle_detect);
The version of the spec I have at hand says aux and dongle are
already part of version 155.
> + }
> +
> + printf("\t\tPipe capabilities: 0x%02x\n", child->pipe_cap);
> + printf("\t\tSDVO stall signal available: %s\n", YESNO(child->sdvo_stall));
> + printf("\t\tHotplu connect status: 0x%02x\n", child->hpd_status);
^
Pre-existing typo
> + printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(child->integrated_encoder));
> + printf("\t\tDVO wiring: 0x%02x\n", child->dvo_wiring);
> +
> + if (context->bdb->version < 171) {
> + printf("\t\tDVO2 wiring: 0x%02x\n", child->dvo2_wiring);
> + } else {
> + printf("\t\tMIPI bridge type: %02x (%s)\n", child->mipi_bridge_type,
> + mipi_bridge_type(child->mipi_bridge_type));
> }
>
> + printf("\t\tDevice class extendsion: 0x%02x\n", child->extended_type);
^
ditto
> + printf("\t\tDVO function: 0x%02x\n", child->dvo_function);
> +
> if (context->bdb->version >= 195) {
> - printf("\t\tDP USB type C support: %s\n", YESNO(efp->dp_usb_type_c));
> - printf("\t\t2X DP GPIO index: 0x%02x\n", efp->dp_gpio_index);
> - printf("\t\t2X DP GPIO pin number: 0x%02x\n", efp->dp_gpio_pin_num);
> + printf("\t\tDP USB type C support: %s\n", YESNO(child->dp_usb_type_c));
> + printf("\t\t2X DP GPIO index: 0x%02x\n", child->dp_gpio_index);
> + printf("\t\t2X DP GPIO pin number: 0x%02x\n", child->dp_gpio_pin_num);
> }
>
> if (context->bdb->version >= 196) {
> - printf("\t\tIBoost level for HDMI: 0x%02x\n", efp->hdmi_iboost_level);
> - printf("\t\tIBoost level for DP/eDP: 0x%02x\n", efp->dp_iboost_level);
> + printf("\t\tIBoost level for HDMI: 0x%02x\n", child->hdmi_iboost_level);
> + printf("\t\tIBoost level for DP/eDP: 0x%02x\n", child->dp_iboost_level);
> }
> }
>
> --
> 2.11.0
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions
2017-10-19 17:24 ` Ville Syrjälä
@ 2017-10-20 10:56 ` Jani Nikula
2017-10-20 11:33 ` Ville Syrjälä
0 siblings, 1 reply; 15+ messages in thread
From: Jani Nikula @ 2017-10-20 10:56 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: intel-gfx
On Thu, 19 Oct 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Thu, Oct 19, 2017 at 06:22:56PM +0300, Jani Nikula wrote:
>> Make it easier to compare dumping against the struct definition.
>>
>> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> ---
>> tools/intel_vbt_decode.c | 128 ++++++++++++++++++++++++++---------------------
>> 1 file changed, 71 insertions(+), 57 deletions(-)
>>
>> diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
>> index 69cf1e4c6cc6..bc5f38112619 100644
>> --- a/tools/intel_vbt_decode.c
>> +++ b/tools/intel_vbt_decode.c
>> @@ -401,74 +401,88 @@ static const char *mipi_bridge_type(uint8_t type)
>> static void dump_child_device(struct context *context,
>> const struct child_device_config *child)
>> {
>> - const struct child_device_config *efp = child;
>> -
>> if (!child->device_type)
>> return;
>>
>> + printf("\tChild device info:\n");
>> + printf("\t\tDevice handle: 0x%04x (%s)\n", child->handle,
>> + child_device_handle(child->handle));
>> + printf("\t\tDevice type: 0x%04x (%s)\n", child->device_type,
>> + child_device_type(child->device_type));
>> + dump_child_device_type_bits(child->device_type);
>> +
>> if (context->bdb->version < 152) {
>> - printf("\tChild device info:\n");
>> - printf("\t\tDevice type: %04x (%s)\n", child->device_type,
>> - child_device_type(child->device_type));
>> printf("\t\tSignature: %.*s\n", (int)sizeof(child->device_id), child->device_id);
>> - printf("\t\tAIM offset: %d\n", child->addin_offset);
>> - printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
>> - } else { /* 152+ have EFP blocks here */
>> - printf("\tEFP device info:\n");
>> - printf("\t\tDevice handle: 0x%04x (%s)\n", efp->handle,
>> - child_device_handle(efp->handle));
>> - printf("\t\tDevice type: 0x%04x (%s)\n", efp->device_type,
>> - child_device_type(efp->device_type));
>> - dump_child_device_type_bits(efp->device_type);
>> - printf("\t\tI2C speed: 0x%02x\n", efp->i2c_speed);
>> - printf("\t\tDP onboard redriver: 0x%02x\n", efp->dp_onboard_redriver);
>> - printf("\t\tDP ondock redriver: 0x%02x\n", efp->dp_ondock_redriver);
>> - printf("\t\tHDMI max data rate: 0x%02x\n", efp->hdmi_max_data_rate);
>> - printf("\t\tHDMI level shifter value: 0x%02x\n", efp->hdmi_level_shifter_value);
>> - printf("\t\tOffset to DTD buffer for edidless EFP: 0x%02x\n", efp->dtd_buf_ptr);
>> - printf("\t\tDual pipe ganged eDP: %s\n", YESNO(efp->ganged_edp));
>> - printf("\t\tCompression method CPS: %s\n", YESNO(efp->compression_method));
>> - printf("\t\tCompression enable: %s\n", YESNO(efp->compression_enable));
>> - printf("\t\tEdidless EFP: %s\n", YESNO(efp->edidless_efp));
>> - printf("\t\tCompression structure index: 0x%02x)\n", efp->compression_structure_index);
>> - printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, dvo_port(efp->slave_port));
>> - printf("\t\tAIM offset: %d\n", child->addin_offset);
>> - printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, dvo_port(efp->dvo_port));
>> - printf("\t\tAIM I2C pin: 0x%02x\n", efp->i2c_pin);
>> - printf("\t\tAIM Slave address: 0x%02x\n", efp->slave_addr);
>> - printf("\t\tDDC pin: 0x%02x\n", efp->ddc_pin);
>> - printf("\t\tEDID buffer ptr: 0x%02x\n", efp->edid_ptr);
>> - printf("\t\tDVO config: 0x%02x\n", efp->dvo_cfg);
>> - printf("\t\tHPD sense invert: %s\n", YESNO(efp->hpd_invert));
>> - printf("\t\tIboost enable: %s\n", YESNO(efp->iboost));
>> - printf("\t\tOnboard LSPCON: %s\n", YESNO(efp->lspcon));
>> - printf("\t\tLane reversal: %s\n", YESNO(efp->lane_reversal));
>> - printf("\t\tEFP routed through dock: %s\n", YESNO(efp->efp_routed));
>> - printf("\t\tHDMI compatible? %s\n", YESNO(efp->hdmi_support));
>> - printf("\t\tDP compatible? %s\n", YESNO(efp->dp_support));
>> - printf("\t\tTMDS compatible? %s\n", YESNO(efp->tmds_support));
>> - printf("\t\tAux channel: 0x%02x\n", efp->aux_channel);
>> - printf("\t\tDongle detect: 0x%02x\n", efp->dongle_detect);
>> - printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(efp->integrated_encoder));
>> - printf("\t\tHotplu connect status: 0x%02x\n", efp->hpd_status);
>> - printf("\t\tSDVO stall signal available: %s\n", YESNO(efp->sdvo_stall));
>> - printf("\t\tPipe capabilities: 0x%02x\n", efp->pipe_cap);
>> - printf("\t\tDVO wiring: 0x%02x\n", efp->dvo_wiring);
>> - printf("\t\tMIPI bridge type: %02x (%s)\n", efp->mipi_bridge_type,
>> - mipi_bridge_type(efp->mipi_bridge_type));
>> - printf("\t\tDevice class extendsion: 0x%02x\n", efp->extended_type);
>> - printf("\t\tDVO function: 0x%02x\n", efp->dvo_function);
>> + } else {
>> + printf("\t\tI2C speed: 0x%02x\n", child->i2c_speed);
>> + printf("\t\tDP onboard redriver: 0x%02x\n", child->dp_onboard_redriver);
>> + printf("\t\tDP ondock redriver: 0x%02x\n", child->dp_ondock_redriver);
>> + printf("\t\tHDMI level shifter value: 0x%02x\n", child->hdmi_level_shifter_value);
>> + printf("\t\tHDMI max data rate: 0x%02x\n", child->hdmi_max_data_rate);
>> + printf("\t\tOffset to DTD buffer for edidless CHILD: 0x%02x\n", child->dtd_buf_ptr);
>> + printf("\t\tEdidless EFP: %s\n", YESNO(child->edidless_efp));
>> + printf("\t\tCompression enable: %s\n", YESNO(child->compression_enable));
>> + printf("\t\tCompression method CPS: %s\n", YESNO(child->compression_method));
>> + printf("\t\tDual pipe ganged eDP: %s\n", YESNO(child->ganged_edp));
>> + printf("\t\tCompression structure index: 0x%02x)\n", child->compression_structure_index);
>> + printf("\t\tSlave DDI port: 0x%02x (%s)\n", child->slave_port, dvo_port(child->slave_port));
>> + }
>> +
>> + printf("\t\tAIM offset: %d\n", child->addin_offset);
>> + printf("\t\tDVO Port: 0x%02x (%s)\n", child->dvo_port, dvo_port(child->dvo_port));
>> +
>> + if (context->bdb->version < 152)
>> + return;
>> +
>> + printf("\t\tAIM I2C pin: 0x%02x\n", child->i2c_pin);
>> + printf("\t\tAIM Slave address: 0x%02x\n", child->slave_addr);
>> + printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
>> + printf("\t\tEDID buffer ptr: 0x%02x\n", child->edid_ptr);
>> + printf("\t\tDVO config: 0x%02x\n", child->dvo_cfg);
>> +
>> + if (context->bdb->version < 158) {
>> + printf("\t\tDVO2 Port: 0x%02x (%s)\n", child->dvo2_port, dvo_port(child->dvo2_port));
>> + printf("\t\tI2C2 pin: 0x%02x\n", child->i2c2_pin);
>> + printf("\t\tSlave2 address: 0x%02x\n", child->slave2_addr);
>> + printf("\t\tDDC2 pin: 0x%02x\n", child->ddc2_pin);
>> + } else {
>> + printf("\t\tEFP routed through dock: %s\n", YESNO(child->efp_routed));
>> + printf("\t\tLane reversal: %s\n", YESNO(child->lane_reversal));
>> + printf("\t\tOnboard LSPCON: %s\n", YESNO(child->lspcon));
>> + printf("\t\tIboost enable: %s\n", YESNO(child->iboost));
>> + printf("\t\tHPD sense invert: %s\n", YESNO(child->hpd_invert));
>> + printf("\t\tHDMI compatible? %s\n", YESNO(child->hdmi_support));
>> + printf("\t\tDP compatible? %s\n", YESNO(child->dp_support));
>> + printf("\t\tTMDS compatible? %s\n", YESNO(child->tmds_support));
>> + printf("\t\tAux channel: 0x%02x\n", child->aux_channel);
>> + printf("\t\tDongle detect: 0x%02x\n", child->dongle_detect);
>
> The version of the spec I have at hand says aux and dongle are
> already part of version 155.
Seems like dvo2/i2c2/slave2/ddc2 were converted to flags at 155. Okay if
I just change the condition above from < 158 to < 155?
BR,
Jani.
>
>> + }
>> +
>> + printf("\t\tPipe capabilities: 0x%02x\n", child->pipe_cap);
>> + printf("\t\tSDVO stall signal available: %s\n", YESNO(child->sdvo_stall));
>> + printf("\t\tHotplu connect status: 0x%02x\n", child->hpd_status);
> ^
> Pre-existing typo
>
>> + printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(child->integrated_encoder));
>> + printf("\t\tDVO wiring: 0x%02x\n", child->dvo_wiring);
>> +
>> + if (context->bdb->version < 171) {
>> + printf("\t\tDVO2 wiring: 0x%02x\n", child->dvo2_wiring);
>> + } else {
>> + printf("\t\tMIPI bridge type: %02x (%s)\n", child->mipi_bridge_type,
>> + mipi_bridge_type(child->mipi_bridge_type));
>> }
>>
>> + printf("\t\tDevice class extendsion: 0x%02x\n", child->extended_type);
> ^
> ditto
>
>> + printf("\t\tDVO function: 0x%02x\n", child->dvo_function);
>> +
>> if (context->bdb->version >= 195) {
>> - printf("\t\tDP USB type C support: %s\n", YESNO(efp->dp_usb_type_c));
>> - printf("\t\t2X DP GPIO index: 0x%02x\n", efp->dp_gpio_index);
>> - printf("\t\t2X DP GPIO pin number: 0x%02x\n", efp->dp_gpio_pin_num);
>> + printf("\t\tDP USB type C support: %s\n", YESNO(child->dp_usb_type_c));
>> + printf("\t\t2X DP GPIO index: 0x%02x\n", child->dp_gpio_index);
>> + printf("\t\t2X DP GPIO pin number: 0x%02x\n", child->dp_gpio_pin_num);
>> }
>>
>> if (context->bdb->version >= 196) {
>> - printf("\t\tIBoost level for HDMI: 0x%02x\n", efp->hdmi_iboost_level);
>> - printf("\t\tIBoost level for DP/eDP: 0x%02x\n", efp->dp_iboost_level);
>> + printf("\t\tIBoost level for HDMI: 0x%02x\n", child->hdmi_iboost_level);
>> + printf("\t\tIBoost level for DP/eDP: 0x%02x\n", child->dp_iboost_level);
>> }
>> }
>>
>> --
>> 2.11.0
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions
2017-10-20 10:56 ` Jani Nikula
@ 2017-10-20 11:33 ` Ville Syrjälä
2017-10-20 13:17 ` Jani Nikula
0 siblings, 1 reply; 15+ messages in thread
From: Ville Syrjälä @ 2017-10-20 11:33 UTC (permalink / raw)
To: Jani Nikula; +Cc: intel-gfx
On Fri, Oct 20, 2017 at 01:56:11PM +0300, Jani Nikula wrote:
> On Thu, 19 Oct 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> > On Thu, Oct 19, 2017 at 06:22:56PM +0300, Jani Nikula wrote:
> >> Make it easier to compare dumping against the struct definition.
> >>
> >> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> >> ---
> >> tools/intel_vbt_decode.c | 128 ++++++++++++++++++++++++++---------------------
> >> 1 file changed, 71 insertions(+), 57 deletions(-)
> >>
> >> diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
> >> index 69cf1e4c6cc6..bc5f38112619 100644
> >> --- a/tools/intel_vbt_decode.c
> >> +++ b/tools/intel_vbt_decode.c
> >> @@ -401,74 +401,88 @@ static const char *mipi_bridge_type(uint8_t type)
> >> static void dump_child_device(struct context *context,
> >> const struct child_device_config *child)
> >> {
> >> - const struct child_device_config *efp = child;
> >> -
> >> if (!child->device_type)
> >> return;
> >>
> >> + printf("\tChild device info:\n");
> >> + printf("\t\tDevice handle: 0x%04x (%s)\n", child->handle,
> >> + child_device_handle(child->handle));
> >> + printf("\t\tDevice type: 0x%04x (%s)\n", child->device_type,
> >> + child_device_type(child->device_type));
> >> + dump_child_device_type_bits(child->device_type);
> >> +
> >> if (context->bdb->version < 152) {
> >> - printf("\tChild device info:\n");
> >> - printf("\t\tDevice type: %04x (%s)\n", child->device_type,
> >> - child_device_type(child->device_type));
> >> printf("\t\tSignature: %.*s\n", (int)sizeof(child->device_id), child->device_id);
> >> - printf("\t\tAIM offset: %d\n", child->addin_offset);
> >> - printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
> >> - } else { /* 152+ have EFP blocks here */
> >> - printf("\tEFP device info:\n");
> >> - printf("\t\tDevice handle: 0x%04x (%s)\n", efp->handle,
> >> - child_device_handle(efp->handle));
> >> - printf("\t\tDevice type: 0x%04x (%s)\n", efp->device_type,
> >> - child_device_type(efp->device_type));
> >> - dump_child_device_type_bits(efp->device_type);
> >> - printf("\t\tI2C speed: 0x%02x\n", efp->i2c_speed);
> >> - printf("\t\tDP onboard redriver: 0x%02x\n", efp->dp_onboard_redriver);
> >> - printf("\t\tDP ondock redriver: 0x%02x\n", efp->dp_ondock_redriver);
> >> - printf("\t\tHDMI max data rate: 0x%02x\n", efp->hdmi_max_data_rate);
> >> - printf("\t\tHDMI level shifter value: 0x%02x\n", efp->hdmi_level_shifter_value);
> >> - printf("\t\tOffset to DTD buffer for edidless EFP: 0x%02x\n", efp->dtd_buf_ptr);
> >> - printf("\t\tDual pipe ganged eDP: %s\n", YESNO(efp->ganged_edp));
> >> - printf("\t\tCompression method CPS: %s\n", YESNO(efp->compression_method));
> >> - printf("\t\tCompression enable: %s\n", YESNO(efp->compression_enable));
> >> - printf("\t\tEdidless EFP: %s\n", YESNO(efp->edidless_efp));
> >> - printf("\t\tCompression structure index: 0x%02x)\n", efp->compression_structure_index);
> >> - printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, dvo_port(efp->slave_port));
> >> - printf("\t\tAIM offset: %d\n", child->addin_offset);
> >> - printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, dvo_port(efp->dvo_port));
> >> - printf("\t\tAIM I2C pin: 0x%02x\n", efp->i2c_pin);
> >> - printf("\t\tAIM Slave address: 0x%02x\n", efp->slave_addr);
> >> - printf("\t\tDDC pin: 0x%02x\n", efp->ddc_pin);
> >> - printf("\t\tEDID buffer ptr: 0x%02x\n", efp->edid_ptr);
> >> - printf("\t\tDVO config: 0x%02x\n", efp->dvo_cfg);
> >> - printf("\t\tHPD sense invert: %s\n", YESNO(efp->hpd_invert));
> >> - printf("\t\tIboost enable: %s\n", YESNO(efp->iboost));
> >> - printf("\t\tOnboard LSPCON: %s\n", YESNO(efp->lspcon));
> >> - printf("\t\tLane reversal: %s\n", YESNO(efp->lane_reversal));
> >> - printf("\t\tEFP routed through dock: %s\n", YESNO(efp->efp_routed));
> >> - printf("\t\tHDMI compatible? %s\n", YESNO(efp->hdmi_support));
> >> - printf("\t\tDP compatible? %s\n", YESNO(efp->dp_support));
> >> - printf("\t\tTMDS compatible? %s\n", YESNO(efp->tmds_support));
> >> - printf("\t\tAux channel: 0x%02x\n", efp->aux_channel);
> >> - printf("\t\tDongle detect: 0x%02x\n", efp->dongle_detect);
> >> - printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(efp->integrated_encoder));
> >> - printf("\t\tHotplu connect status: 0x%02x\n", efp->hpd_status);
> >> - printf("\t\tSDVO stall signal available: %s\n", YESNO(efp->sdvo_stall));
> >> - printf("\t\tPipe capabilities: 0x%02x\n", efp->pipe_cap);
> >> - printf("\t\tDVO wiring: 0x%02x\n", efp->dvo_wiring);
> >> - printf("\t\tMIPI bridge type: %02x (%s)\n", efp->mipi_bridge_type,
> >> - mipi_bridge_type(efp->mipi_bridge_type));
> >> - printf("\t\tDevice class extendsion: 0x%02x\n", efp->extended_type);
> >> - printf("\t\tDVO function: 0x%02x\n", efp->dvo_function);
> >> + } else {
> >> + printf("\t\tI2C speed: 0x%02x\n", child->i2c_speed);
> >> + printf("\t\tDP onboard redriver: 0x%02x\n", child->dp_onboard_redriver);
> >> + printf("\t\tDP ondock redriver: 0x%02x\n", child->dp_ondock_redriver);
> >> + printf("\t\tHDMI level shifter value: 0x%02x\n", child->hdmi_level_shifter_value);
> >> + printf("\t\tHDMI max data rate: 0x%02x\n", child->hdmi_max_data_rate);
> >> + printf("\t\tOffset to DTD buffer for edidless CHILD: 0x%02x\n", child->dtd_buf_ptr);
> >> + printf("\t\tEdidless EFP: %s\n", YESNO(child->edidless_efp));
> >> + printf("\t\tCompression enable: %s\n", YESNO(child->compression_enable));
> >> + printf("\t\tCompression method CPS: %s\n", YESNO(child->compression_method));
> >> + printf("\t\tDual pipe ganged eDP: %s\n", YESNO(child->ganged_edp));
> >> + printf("\t\tCompression structure index: 0x%02x)\n", child->compression_structure_index);
> >> + printf("\t\tSlave DDI port: 0x%02x (%s)\n", child->slave_port, dvo_port(child->slave_port));
> >> + }
> >> +
> >> + printf("\t\tAIM offset: %d\n", child->addin_offset);
> >> + printf("\t\tDVO Port: 0x%02x (%s)\n", child->dvo_port, dvo_port(child->dvo_port));
> >> +
> >> + if (context->bdb->version < 152)
> >> + return;
> >> +
> >> + printf("\t\tAIM I2C pin: 0x%02x\n", child->i2c_pin);
> >> + printf("\t\tAIM Slave address: 0x%02x\n", child->slave_addr);
> >> + printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
> >> + printf("\t\tEDID buffer ptr: 0x%02x\n", child->edid_ptr);
> >> + printf("\t\tDVO config: 0x%02x\n", child->dvo_cfg);
> >> +
> >> + if (context->bdb->version < 158) {
> >> + printf("\t\tDVO2 Port: 0x%02x (%s)\n", child->dvo2_port, dvo_port(child->dvo2_port));
> >> + printf("\t\tI2C2 pin: 0x%02x\n", child->i2c2_pin);
> >> + printf("\t\tSlave2 address: 0x%02x\n", child->slave2_addr);
> >> + printf("\t\tDDC2 pin: 0x%02x\n", child->ddc2_pin);
> >> + } else {
> >> + printf("\t\tEFP routed through dock: %s\n", YESNO(child->efp_routed));
> >> + printf("\t\tLane reversal: %s\n", YESNO(child->lane_reversal));
> >> + printf("\t\tOnboard LSPCON: %s\n", YESNO(child->lspcon));
> >> + printf("\t\tIboost enable: %s\n", YESNO(child->iboost));
> >> + printf("\t\tHPD sense invert: %s\n", YESNO(child->hpd_invert));
> >> + printf("\t\tHDMI compatible? %s\n", YESNO(child->hdmi_support));
> >> + printf("\t\tDP compatible? %s\n", YESNO(child->dp_support));
> >> + printf("\t\tTMDS compatible? %s\n", YESNO(child->tmds_support));
> >> + printf("\t\tAux channel: 0x%02x\n", child->aux_channel);
> >> + printf("\t\tDongle detect: 0x%02x\n", child->dongle_detect);
> >
> > The version of the spec I have at hand says aux and dongle are
> > already part of version 155.
>
> Seems like dvo2/i2c2/slave2/ddc2 were converted to flags at 155. Okay if
> I just change the condition above from < 158 to < 155?
Aye.
I didn't trawl through all the gritty details of the entire series, but
what I do see I like, so for the series
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
I wonder if we should add more version checks so that we wouldn't dump
things that aren't actually specified? One crazy idea I had is that we
could define a parallel structure which would have a matching u8 member
to everything in the child_device_config, and we would initialize
each member with the correct version number. Then we could have some
kind of nice dump macro/function that checks the current VBT version
against the number from said parallel structure.
>
> BR,
> Jani.
>
>
> >
> >> + }
> >> +
> >> + printf("\t\tPipe capabilities: 0x%02x\n", child->pipe_cap);
> >> + printf("\t\tSDVO stall signal available: %s\n", YESNO(child->sdvo_stall));
> >> + printf("\t\tHotplu connect status: 0x%02x\n", child->hpd_status);
> > ^
> > Pre-existing typo
> >
> >> + printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(child->integrated_encoder));
> >> + printf("\t\tDVO wiring: 0x%02x\n", child->dvo_wiring);
> >> +
> >> + if (context->bdb->version < 171) {
> >> + printf("\t\tDVO2 wiring: 0x%02x\n", child->dvo2_wiring);
> >> + } else {
> >> + printf("\t\tMIPI bridge type: %02x (%s)\n", child->mipi_bridge_type,
> >> + mipi_bridge_type(child->mipi_bridge_type));
> >> }
> >>
> >> + printf("\t\tDevice class extendsion: 0x%02x\n", child->extended_type);
> > ^
> > ditto
> >
> >> + printf("\t\tDVO function: 0x%02x\n", child->dvo_function);
> >> +
> >> if (context->bdb->version >= 195) {
> >> - printf("\t\tDP USB type C support: %s\n", YESNO(efp->dp_usb_type_c));
> >> - printf("\t\t2X DP GPIO index: 0x%02x\n", efp->dp_gpio_index);
> >> - printf("\t\t2X DP GPIO pin number: 0x%02x\n", efp->dp_gpio_pin_num);
> >> + printf("\t\tDP USB type C support: %s\n", YESNO(child->dp_usb_type_c));
> >> + printf("\t\t2X DP GPIO index: 0x%02x\n", child->dp_gpio_index);
> >> + printf("\t\t2X DP GPIO pin number: 0x%02x\n", child->dp_gpio_pin_num);
> >> }
> >>
> >> if (context->bdb->version >= 196) {
> >> - printf("\t\tIBoost level for HDMI: 0x%02x\n", efp->hdmi_iboost_level);
> >> - printf("\t\tIBoost level for DP/eDP: 0x%02x\n", efp->dp_iboost_level);
> >> + printf("\t\tIBoost level for HDMI: 0x%02x\n", child->hdmi_iboost_level);
> >> + printf("\t\tIBoost level for DP/eDP: 0x%02x\n", child->dp_iboost_level);
> >> }
> >> }
> >>
> >> --
> >> 2.11.0
>
> --
> Jani Nikula, Intel Open Source Technology Center
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions
2017-10-20 11:33 ` Ville Syrjälä
@ 2017-10-20 13:17 ` Jani Nikula
2017-10-20 13:49 ` Ville Syrjälä
0 siblings, 1 reply; 15+ messages in thread
From: Jani Nikula @ 2017-10-20 13:17 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: intel-gfx
On Fri, 20 Oct 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Fri, Oct 20, 2017 at 01:56:11PM +0300, Jani Nikula wrote:
>> On Thu, 19 Oct 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
>> > On Thu, Oct 19, 2017 at 06:22:56PM +0300, Jani Nikula wrote:
>> >> Make it easier to compare dumping against the struct definition.
>> >>
>> >> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
>> >> ---
>> >> tools/intel_vbt_decode.c | 128 ++++++++++++++++++++++++++---------------------
>> >> 1 file changed, 71 insertions(+), 57 deletions(-)
>> >>
>> >> diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
>> >> index 69cf1e4c6cc6..bc5f38112619 100644
>> >> --- a/tools/intel_vbt_decode.c
>> >> +++ b/tools/intel_vbt_decode.c
>> >> @@ -401,74 +401,88 @@ static const char *mipi_bridge_type(uint8_t type)
>> >> static void dump_child_device(struct context *context,
>> >> const struct child_device_config *child)
>> >> {
>> >> - const struct child_device_config *efp = child;
>> >> -
>> >> if (!child->device_type)
>> >> return;
>> >>
>> >> + printf("\tChild device info:\n");
>> >> + printf("\t\tDevice handle: 0x%04x (%s)\n", child->handle,
>> >> + child_device_handle(child->handle));
>> >> + printf("\t\tDevice type: 0x%04x (%s)\n", child->device_type,
>> >> + child_device_type(child->device_type));
>> >> + dump_child_device_type_bits(child->device_type);
>> >> +
>> >> if (context->bdb->version < 152) {
>> >> - printf("\tChild device info:\n");
>> >> - printf("\t\tDevice type: %04x (%s)\n", child->device_type,
>> >> - child_device_type(child->device_type));
>> >> printf("\t\tSignature: %.*s\n", (int)sizeof(child->device_id), child->device_id);
>> >> - printf("\t\tAIM offset: %d\n", child->addin_offset);
>> >> - printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
>> >> - } else { /* 152+ have EFP blocks here */
>> >> - printf("\tEFP device info:\n");
>> >> - printf("\t\tDevice handle: 0x%04x (%s)\n", efp->handle,
>> >> - child_device_handle(efp->handle));
>> >> - printf("\t\tDevice type: 0x%04x (%s)\n", efp->device_type,
>> >> - child_device_type(efp->device_type));
>> >> - dump_child_device_type_bits(efp->device_type);
>> >> - printf("\t\tI2C speed: 0x%02x\n", efp->i2c_speed);
>> >> - printf("\t\tDP onboard redriver: 0x%02x\n", efp->dp_onboard_redriver);
>> >> - printf("\t\tDP ondock redriver: 0x%02x\n", efp->dp_ondock_redriver);
>> >> - printf("\t\tHDMI max data rate: 0x%02x\n", efp->hdmi_max_data_rate);
>> >> - printf("\t\tHDMI level shifter value: 0x%02x\n", efp->hdmi_level_shifter_value);
>> >> - printf("\t\tOffset to DTD buffer for edidless EFP: 0x%02x\n", efp->dtd_buf_ptr);
>> >> - printf("\t\tDual pipe ganged eDP: %s\n", YESNO(efp->ganged_edp));
>> >> - printf("\t\tCompression method CPS: %s\n", YESNO(efp->compression_method));
>> >> - printf("\t\tCompression enable: %s\n", YESNO(efp->compression_enable));
>> >> - printf("\t\tEdidless EFP: %s\n", YESNO(efp->edidless_efp));
>> >> - printf("\t\tCompression structure index: 0x%02x)\n", efp->compression_structure_index);
>> >> - printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, dvo_port(efp->slave_port));
>> >> - printf("\t\tAIM offset: %d\n", child->addin_offset);
>> >> - printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, dvo_port(efp->dvo_port));
>> >> - printf("\t\tAIM I2C pin: 0x%02x\n", efp->i2c_pin);
>> >> - printf("\t\tAIM Slave address: 0x%02x\n", efp->slave_addr);
>> >> - printf("\t\tDDC pin: 0x%02x\n", efp->ddc_pin);
>> >> - printf("\t\tEDID buffer ptr: 0x%02x\n", efp->edid_ptr);
>> >> - printf("\t\tDVO config: 0x%02x\n", efp->dvo_cfg);
>> >> - printf("\t\tHPD sense invert: %s\n", YESNO(efp->hpd_invert));
>> >> - printf("\t\tIboost enable: %s\n", YESNO(efp->iboost));
>> >> - printf("\t\tOnboard LSPCON: %s\n", YESNO(efp->lspcon));
>> >> - printf("\t\tLane reversal: %s\n", YESNO(efp->lane_reversal));
>> >> - printf("\t\tEFP routed through dock: %s\n", YESNO(efp->efp_routed));
>> >> - printf("\t\tHDMI compatible? %s\n", YESNO(efp->hdmi_support));
>> >> - printf("\t\tDP compatible? %s\n", YESNO(efp->dp_support));
>> >> - printf("\t\tTMDS compatible? %s\n", YESNO(efp->tmds_support));
>> >> - printf("\t\tAux channel: 0x%02x\n", efp->aux_channel);
>> >> - printf("\t\tDongle detect: 0x%02x\n", efp->dongle_detect);
>> >> - printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(efp->integrated_encoder));
>> >> - printf("\t\tHotplu connect status: 0x%02x\n", efp->hpd_status);
>> >> - printf("\t\tSDVO stall signal available: %s\n", YESNO(efp->sdvo_stall));
>> >> - printf("\t\tPipe capabilities: 0x%02x\n", efp->pipe_cap);
>> >> - printf("\t\tDVO wiring: 0x%02x\n", efp->dvo_wiring);
>> >> - printf("\t\tMIPI bridge type: %02x (%s)\n", efp->mipi_bridge_type,
>> >> - mipi_bridge_type(efp->mipi_bridge_type));
>> >> - printf("\t\tDevice class extendsion: 0x%02x\n", efp->extended_type);
>> >> - printf("\t\tDVO function: 0x%02x\n", efp->dvo_function);
>> >> + } else {
>> >> + printf("\t\tI2C speed: 0x%02x\n", child->i2c_speed);
>> >> + printf("\t\tDP onboard redriver: 0x%02x\n", child->dp_onboard_redriver);
>> >> + printf("\t\tDP ondock redriver: 0x%02x\n", child->dp_ondock_redriver);
>> >> + printf("\t\tHDMI level shifter value: 0x%02x\n", child->hdmi_level_shifter_value);
>> >> + printf("\t\tHDMI max data rate: 0x%02x\n", child->hdmi_max_data_rate);
>> >> + printf("\t\tOffset to DTD buffer for edidless CHILD: 0x%02x\n", child->dtd_buf_ptr);
>> >> + printf("\t\tEdidless EFP: %s\n", YESNO(child->edidless_efp));
>> >> + printf("\t\tCompression enable: %s\n", YESNO(child->compression_enable));
>> >> + printf("\t\tCompression method CPS: %s\n", YESNO(child->compression_method));
>> >> + printf("\t\tDual pipe ganged eDP: %s\n", YESNO(child->ganged_edp));
>> >> + printf("\t\tCompression structure index: 0x%02x)\n", child->compression_structure_index);
>> >> + printf("\t\tSlave DDI port: 0x%02x (%s)\n", child->slave_port, dvo_port(child->slave_port));
>> >> + }
>> >> +
>> >> + printf("\t\tAIM offset: %d\n", child->addin_offset);
>> >> + printf("\t\tDVO Port: 0x%02x (%s)\n", child->dvo_port, dvo_port(child->dvo_port));
>> >> +
>> >> + if (context->bdb->version < 152)
>> >> + return;
>> >> +
>> >> + printf("\t\tAIM I2C pin: 0x%02x\n", child->i2c_pin);
>> >> + printf("\t\tAIM Slave address: 0x%02x\n", child->slave_addr);
>> >> + printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
>> >> + printf("\t\tEDID buffer ptr: 0x%02x\n", child->edid_ptr);
>> >> + printf("\t\tDVO config: 0x%02x\n", child->dvo_cfg);
>> >> +
>> >> + if (context->bdb->version < 158) {
>> >> + printf("\t\tDVO2 Port: 0x%02x (%s)\n", child->dvo2_port, dvo_port(child->dvo2_port));
>> >> + printf("\t\tI2C2 pin: 0x%02x\n", child->i2c2_pin);
>> >> + printf("\t\tSlave2 address: 0x%02x\n", child->slave2_addr);
>> >> + printf("\t\tDDC2 pin: 0x%02x\n", child->ddc2_pin);
>> >> + } else {
>> >> + printf("\t\tEFP routed through dock: %s\n", YESNO(child->efp_routed));
>> >> + printf("\t\tLane reversal: %s\n", YESNO(child->lane_reversal));
>> >> + printf("\t\tOnboard LSPCON: %s\n", YESNO(child->lspcon));
>> >> + printf("\t\tIboost enable: %s\n", YESNO(child->iboost));
>> >> + printf("\t\tHPD sense invert: %s\n", YESNO(child->hpd_invert));
>> >> + printf("\t\tHDMI compatible? %s\n", YESNO(child->hdmi_support));
>> >> + printf("\t\tDP compatible? %s\n", YESNO(child->dp_support));
>> >> + printf("\t\tTMDS compatible? %s\n", YESNO(child->tmds_support));
>> >> + printf("\t\tAux channel: 0x%02x\n", child->aux_channel);
>> >> + printf("\t\tDongle detect: 0x%02x\n", child->dongle_detect);
>> >
>> > The version of the spec I have at hand says aux and dongle are
>> > already part of version 155.
>>
>> Seems like dvo2/i2c2/slave2/ddc2 were converted to flags at 155. Okay if
>> I just change the condition above from < 158 to < 155?
>
> Aye.
>
> I didn't trawl through all the gritty details of the entire series, but
> what I do see I like, so for the series
> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Thanks, pushed the lot.
> I wonder if we should add more version checks so that we wouldn't dump
> things that aren't actually specified? One crazy idea I had is that we
> could define a parallel structure which would have a matching u8 member
> to everything in the child_device_config, and we would initialize
> each member with the correct version number. Then we could have some
> kind of nice dump macro/function that checks the current VBT version
> against the number from said parallel structure.
Overengineering? ;)
BR,
Jani.
>
>>
>> BR,
>> Jani.
>>
>>
>> >
>> >> + }
>> >> +
>> >> + printf("\t\tPipe capabilities: 0x%02x\n", child->pipe_cap);
>> >> + printf("\t\tSDVO stall signal available: %s\n", YESNO(child->sdvo_stall));
>> >> + printf("\t\tHotplu connect status: 0x%02x\n", child->hpd_status);
>> > ^
>> > Pre-existing typo
>> >
>> >> + printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(child->integrated_encoder));
>> >> + printf("\t\tDVO wiring: 0x%02x\n", child->dvo_wiring);
>> >> +
>> >> + if (context->bdb->version < 171) {
>> >> + printf("\t\tDVO2 wiring: 0x%02x\n", child->dvo2_wiring);
>> >> + } else {
>> >> + printf("\t\tMIPI bridge type: %02x (%s)\n", child->mipi_bridge_type,
>> >> + mipi_bridge_type(child->mipi_bridge_type));
>> >> }
>> >>
>> >> + printf("\t\tDevice class extendsion: 0x%02x\n", child->extended_type);
>> > ^
>> > ditto
>> >
>> >> + printf("\t\tDVO function: 0x%02x\n", child->dvo_function);
>> >> +
>> >> if (context->bdb->version >= 195) {
>> >> - printf("\t\tDP USB type C support: %s\n", YESNO(efp->dp_usb_type_c));
>> >> - printf("\t\t2X DP GPIO index: 0x%02x\n", efp->dp_gpio_index);
>> >> - printf("\t\t2X DP GPIO pin number: 0x%02x\n", efp->dp_gpio_pin_num);
>> >> + printf("\t\tDP USB type C support: %s\n", YESNO(child->dp_usb_type_c));
>> >> + printf("\t\t2X DP GPIO index: 0x%02x\n", child->dp_gpio_index);
>> >> + printf("\t\t2X DP GPIO pin number: 0x%02x\n", child->dp_gpio_pin_num);
>> >> }
>> >>
>> >> if (context->bdb->version >= 196) {
>> >> - printf("\t\tIBoost level for HDMI: 0x%02x\n", efp->hdmi_iboost_level);
>> >> - printf("\t\tIBoost level for DP/eDP: 0x%02x\n", efp->dp_iboost_level);
>> >> + printf("\t\tIBoost level for HDMI: 0x%02x\n", child->hdmi_iboost_level);
>> >> + printf("\t\tIBoost level for DP/eDP: 0x%02x\n", child->dp_iboost_level);
>> >> }
>> >> }
>> >>
>> >> --
>> >> 2.11.0
>>
>> --
>> Jani Nikula, Intel Open Source Technology Center
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions
2017-10-20 13:17 ` Jani Nikula
@ 2017-10-20 13:49 ` Ville Syrjälä
0 siblings, 0 replies; 15+ messages in thread
From: Ville Syrjälä @ 2017-10-20 13:49 UTC (permalink / raw)
To: Jani Nikula; +Cc: intel-gfx
On Fri, Oct 20, 2017 at 04:17:06PM +0300, Jani Nikula wrote:
> On Fri, 20 Oct 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> > On Fri, Oct 20, 2017 at 01:56:11PM +0300, Jani Nikula wrote:
> >> On Thu, 19 Oct 2017, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> >> > On Thu, Oct 19, 2017 at 06:22:56PM +0300, Jani Nikula wrote:
> >> >> Make it easier to compare dumping against the struct definition.
> >> >>
> >> >> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> >> >> ---
> >> >> tools/intel_vbt_decode.c | 128 ++++++++++++++++++++++++++---------------------
> >> >> 1 file changed, 71 insertions(+), 57 deletions(-)
> >> >>
> >> >> diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
> >> >> index 69cf1e4c6cc6..bc5f38112619 100644
> >> >> --- a/tools/intel_vbt_decode.c
> >> >> +++ b/tools/intel_vbt_decode.c
> >> >> @@ -401,74 +401,88 @@ static const char *mipi_bridge_type(uint8_t type)
> >> >> static void dump_child_device(struct context *context,
> >> >> const struct child_device_config *child)
> >> >> {
> >> >> - const struct child_device_config *efp = child;
> >> >> -
> >> >> if (!child->device_type)
> >> >> return;
> >> >>
> >> >> + printf("\tChild device info:\n");
> >> >> + printf("\t\tDevice handle: 0x%04x (%s)\n", child->handle,
> >> >> + child_device_handle(child->handle));
> >> >> + printf("\t\tDevice type: 0x%04x (%s)\n", child->device_type,
> >> >> + child_device_type(child->device_type));
> >> >> + dump_child_device_type_bits(child->device_type);
> >> >> +
> >> >> if (context->bdb->version < 152) {
> >> >> - printf("\tChild device info:\n");
> >> >> - printf("\t\tDevice type: %04x (%s)\n", child->device_type,
> >> >> - child_device_type(child->device_type));
> >> >> printf("\t\tSignature: %.*s\n", (int)sizeof(child->device_id), child->device_id);
> >> >> - printf("\t\tAIM offset: %d\n", child->addin_offset);
> >> >> - printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
> >> >> - } else { /* 152+ have EFP blocks here */
> >> >> - printf("\tEFP device info:\n");
> >> >> - printf("\t\tDevice handle: 0x%04x (%s)\n", efp->handle,
> >> >> - child_device_handle(efp->handle));
> >> >> - printf("\t\tDevice type: 0x%04x (%s)\n", efp->device_type,
> >> >> - child_device_type(efp->device_type));
> >> >> - dump_child_device_type_bits(efp->device_type);
> >> >> - printf("\t\tI2C speed: 0x%02x\n", efp->i2c_speed);
> >> >> - printf("\t\tDP onboard redriver: 0x%02x\n", efp->dp_onboard_redriver);
> >> >> - printf("\t\tDP ondock redriver: 0x%02x\n", efp->dp_ondock_redriver);
> >> >> - printf("\t\tHDMI max data rate: 0x%02x\n", efp->hdmi_max_data_rate);
> >> >> - printf("\t\tHDMI level shifter value: 0x%02x\n", efp->hdmi_level_shifter_value);
> >> >> - printf("\t\tOffset to DTD buffer for edidless EFP: 0x%02x\n", efp->dtd_buf_ptr);
> >> >> - printf("\t\tDual pipe ganged eDP: %s\n", YESNO(efp->ganged_edp));
> >> >> - printf("\t\tCompression method CPS: %s\n", YESNO(efp->compression_method));
> >> >> - printf("\t\tCompression enable: %s\n", YESNO(efp->compression_enable));
> >> >> - printf("\t\tEdidless EFP: %s\n", YESNO(efp->edidless_efp));
> >> >> - printf("\t\tCompression structure index: 0x%02x)\n", efp->compression_structure_index);
> >> >> - printf("\t\tSlave DDI port: 0x%02x (%s)\n", efp->slave_port, dvo_port(efp->slave_port));
> >> >> - printf("\t\tAIM offset: %d\n", child->addin_offset);
> >> >> - printf("\t\tPort: 0x%02x (%s)\n", efp->dvo_port, dvo_port(efp->dvo_port));
> >> >> - printf("\t\tAIM I2C pin: 0x%02x\n", efp->i2c_pin);
> >> >> - printf("\t\tAIM Slave address: 0x%02x\n", efp->slave_addr);
> >> >> - printf("\t\tDDC pin: 0x%02x\n", efp->ddc_pin);
> >> >> - printf("\t\tEDID buffer ptr: 0x%02x\n", efp->edid_ptr);
> >> >> - printf("\t\tDVO config: 0x%02x\n", efp->dvo_cfg);
> >> >> - printf("\t\tHPD sense invert: %s\n", YESNO(efp->hpd_invert));
> >> >> - printf("\t\tIboost enable: %s\n", YESNO(efp->iboost));
> >> >> - printf("\t\tOnboard LSPCON: %s\n", YESNO(efp->lspcon));
> >> >> - printf("\t\tLane reversal: %s\n", YESNO(efp->lane_reversal));
> >> >> - printf("\t\tEFP routed through dock: %s\n", YESNO(efp->efp_routed));
> >> >> - printf("\t\tHDMI compatible? %s\n", YESNO(efp->hdmi_support));
> >> >> - printf("\t\tDP compatible? %s\n", YESNO(efp->dp_support));
> >> >> - printf("\t\tTMDS compatible? %s\n", YESNO(efp->tmds_support));
> >> >> - printf("\t\tAux channel: 0x%02x\n", efp->aux_channel);
> >> >> - printf("\t\tDongle detect: 0x%02x\n", efp->dongle_detect);
> >> >> - printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(efp->integrated_encoder));
> >> >> - printf("\t\tHotplu connect status: 0x%02x\n", efp->hpd_status);
> >> >> - printf("\t\tSDVO stall signal available: %s\n", YESNO(efp->sdvo_stall));
> >> >> - printf("\t\tPipe capabilities: 0x%02x\n", efp->pipe_cap);
> >> >> - printf("\t\tDVO wiring: 0x%02x\n", efp->dvo_wiring);
> >> >> - printf("\t\tMIPI bridge type: %02x (%s)\n", efp->mipi_bridge_type,
> >> >> - mipi_bridge_type(efp->mipi_bridge_type));
> >> >> - printf("\t\tDevice class extendsion: 0x%02x\n", efp->extended_type);
> >> >> - printf("\t\tDVO function: 0x%02x\n", efp->dvo_function);
> >> >> + } else {
> >> >> + printf("\t\tI2C speed: 0x%02x\n", child->i2c_speed);
> >> >> + printf("\t\tDP onboard redriver: 0x%02x\n", child->dp_onboard_redriver);
> >> >> + printf("\t\tDP ondock redriver: 0x%02x\n", child->dp_ondock_redriver);
> >> >> + printf("\t\tHDMI level shifter value: 0x%02x\n", child->hdmi_level_shifter_value);
> >> >> + printf("\t\tHDMI max data rate: 0x%02x\n", child->hdmi_max_data_rate);
> >> >> + printf("\t\tOffset to DTD buffer for edidless CHILD: 0x%02x\n", child->dtd_buf_ptr);
> >> >> + printf("\t\tEdidless EFP: %s\n", YESNO(child->edidless_efp));
> >> >> + printf("\t\tCompression enable: %s\n", YESNO(child->compression_enable));
> >> >> + printf("\t\tCompression method CPS: %s\n", YESNO(child->compression_method));
> >> >> + printf("\t\tDual pipe ganged eDP: %s\n", YESNO(child->ganged_edp));
> >> >> + printf("\t\tCompression structure index: 0x%02x)\n", child->compression_structure_index);
> >> >> + printf("\t\tSlave DDI port: 0x%02x (%s)\n", child->slave_port, dvo_port(child->slave_port));
> >> >> + }
> >> >> +
> >> >> + printf("\t\tAIM offset: %d\n", child->addin_offset);
> >> >> + printf("\t\tDVO Port: 0x%02x (%s)\n", child->dvo_port, dvo_port(child->dvo_port));
> >> >> +
> >> >> + if (context->bdb->version < 152)
> >> >> + return;
> >> >> +
> >> >> + printf("\t\tAIM I2C pin: 0x%02x\n", child->i2c_pin);
> >> >> + printf("\t\tAIM Slave address: 0x%02x\n", child->slave_addr);
> >> >> + printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
> >> >> + printf("\t\tEDID buffer ptr: 0x%02x\n", child->edid_ptr);
> >> >> + printf("\t\tDVO config: 0x%02x\n", child->dvo_cfg);
> >> >> +
> >> >> + if (context->bdb->version < 158) {
> >> >> + printf("\t\tDVO2 Port: 0x%02x (%s)\n", child->dvo2_port, dvo_port(child->dvo2_port));
> >> >> + printf("\t\tI2C2 pin: 0x%02x\n", child->i2c2_pin);
> >> >> + printf("\t\tSlave2 address: 0x%02x\n", child->slave2_addr);
> >> >> + printf("\t\tDDC2 pin: 0x%02x\n", child->ddc2_pin);
> >> >> + } else {
> >> >> + printf("\t\tEFP routed through dock: %s\n", YESNO(child->efp_routed));
> >> >> + printf("\t\tLane reversal: %s\n", YESNO(child->lane_reversal));
> >> >> + printf("\t\tOnboard LSPCON: %s\n", YESNO(child->lspcon));
> >> >> + printf("\t\tIboost enable: %s\n", YESNO(child->iboost));
> >> >> + printf("\t\tHPD sense invert: %s\n", YESNO(child->hpd_invert));
> >> >> + printf("\t\tHDMI compatible? %s\n", YESNO(child->hdmi_support));
> >> >> + printf("\t\tDP compatible? %s\n", YESNO(child->dp_support));
> >> >> + printf("\t\tTMDS compatible? %s\n", YESNO(child->tmds_support));
> >> >> + printf("\t\tAux channel: 0x%02x\n", child->aux_channel);
> >> >> + printf("\t\tDongle detect: 0x%02x\n", child->dongle_detect);
> >> >
> >> > The version of the spec I have at hand says aux and dongle are
> >> > already part of version 155.
> >>
> >> Seems like dvo2/i2c2/slave2/ddc2 were converted to flags at 155. Okay if
> >> I just change the condition above from < 158 to < 155?
> >
> > Aye.
> >
> > I didn't trawl through all the gritty details of the entire series, but
> > what I do see I like, so for the series
> > Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Thanks, pushed the lot.
>
> > I wonder if we should add more version checks so that we wouldn't dump
> > things that aren't actually specified? One crazy idea I had is that we
> > could define a parallel structure which would have a matching u8 member
> > to everything in the child_device_config, and we would initialize
> > each member with the correct version number. Then we could have some
> > kind of nice dump macro/function that checks the current VBT version
> > against the number from said parallel structure.
>
> Overengineering? ;)
Possibly. But it seems like a much nicer way to go about it that
sprinking 'if (version >= ...)' checks all over. Although I guess
we could also just pass the hardcoded minimum version to that
macro/function I was thinking we'd add.
>
> BR,
> Jani.
>
>
> >
> >>
> >> BR,
> >> Jani.
> >>
> >>
> >> >
> >> >> + }
> >> >> +
> >> >> + printf("\t\tPipe capabilities: 0x%02x\n", child->pipe_cap);
> >> >> + printf("\t\tSDVO stall signal available: %s\n", YESNO(child->sdvo_stall));
> >> >> + printf("\t\tHotplu connect status: 0x%02x\n", child->hpd_status);
> >> > ^
> >> > Pre-existing typo
> >> >
> >> >> + printf("\t\tIntegrated encoder instead of SDVO: %s\n", YESNO(child->integrated_encoder));
> >> >> + printf("\t\tDVO wiring: 0x%02x\n", child->dvo_wiring);
> >> >> +
> >> >> + if (context->bdb->version < 171) {
> >> >> + printf("\t\tDVO2 wiring: 0x%02x\n", child->dvo2_wiring);
> >> >> + } else {
> >> >> + printf("\t\tMIPI bridge type: %02x (%s)\n", child->mipi_bridge_type,
> >> >> + mipi_bridge_type(child->mipi_bridge_type));
> >> >> }
> >> >>
> >> >> + printf("\t\tDevice class extendsion: 0x%02x\n", child->extended_type);
> >> > ^
> >> > ditto
> >> >
> >> >> + printf("\t\tDVO function: 0x%02x\n", child->dvo_function);
> >> >> +
> >> >> if (context->bdb->version >= 195) {
> >> >> - printf("\t\tDP USB type C support: %s\n", YESNO(efp->dp_usb_type_c));
> >> >> - printf("\t\t2X DP GPIO index: 0x%02x\n", efp->dp_gpio_index);
> >> >> - printf("\t\t2X DP GPIO pin number: 0x%02x\n", efp->dp_gpio_pin_num);
> >> >> + printf("\t\tDP USB type C support: %s\n", YESNO(child->dp_usb_type_c));
> >> >> + printf("\t\t2X DP GPIO index: 0x%02x\n", child->dp_gpio_index);
> >> >> + printf("\t\t2X DP GPIO pin number: 0x%02x\n", child->dp_gpio_pin_num);
> >> >> }
> >> >>
> >> >> if (context->bdb->version >= 196) {
> >> >> - printf("\t\tIBoost level for HDMI: 0x%02x\n", efp->hdmi_iboost_level);
> >> >> - printf("\t\tIBoost level for DP/eDP: 0x%02x\n", efp->dp_iboost_level);
> >> >> + printf("\t\tIBoost level for HDMI: 0x%02x\n", child->hdmi_iboost_level);
> >> >> + printf("\t\tIBoost level for DP/eDP: 0x%02x\n", child->dp_iboost_level);
> >> >> }
> >> >> }
> >> >>
> >> >> --
> >> >> 2.11.0
> >>
> >> --
> >> Jani Nikula, Intel Open Source Technology Center
>
> --
> Jani Nikula, Intel Open Source Technology Center
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH i-g-t 6/8] tools/intel_vbt_decode: unify legacy child device block dumping
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
` (4 preceding siblings ...)
2017-10-19 15:22 ` [PATCH i-g-t 5/8] tools/intel_vbt_decode: unify child device printing across versions Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 7/8] tools/intel_vbt_decode: dump more child device data for version < 152 Jani Nikula
` (2 subsequent siblings)
8 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
It's the same stuff as in the new child devices.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_bios.h | 30 +++---------------------------
tools/intel_vbt_decode.c | 37 +++++++++++++++++++++----------------
2 files changed, 24 insertions(+), 43 deletions(-)
diff --git a/tools/intel_bios.h b/tools/intel_bios.h
index f0475b5cfcc3..78a96d977536 100644
--- a/tools/intel_bios.h
+++ b/tools/intel_bios.h
@@ -42,33 +42,9 @@
#define DEVICE_TYPE_DVI 0x68d2
#define DEVICE_TYPE_MIPI 0x7cc2
-struct legacy_child_device_config {
- uint16_t handle;
- uint16_t device_type; /* See DEVICE_TYPE_* above */
- uint8_t device_id[10];
- uint16_t addin_offset;
- uint8_t dvo_port; /* See DEVICE_PORT_* above */
- uint8_t i2c_pin;
- uint8_t slave_addr;
- uint8_t ddc_pin;
- uint16_t edid_ptr;
- uint8_t dvo_cfg; /* See DEVICE_CFG_* above */
- uint8_t dvo2_port;
- uint8_t i2c2_pin;
- uint8_t slave2_addr;
- uint8_t ddc2_pin;
- uint8_t capabilities;
- uint8_t dvo_wiring; /* See DEVICE_WIRE_* above */
- uint8_t dvo2_wiring;
- uint16_t extended_type;
- uint8_t dvo_function;
-} __attribute__ ((packed));
-
-#define DEVICE_CHILD_SIZE 7
-
-struct bdb_child_devices {
- uint8_t child_structure_size;
- struct legacy_child_device_config children[DEVICE_CHILD_SIZE];
+struct bdb_legacy_child_devices {
+ uint8_t child_dev_size;
+ uint8_t devices[0]; /* presumably 7 * 33 */
} __attribute__ ((packed));
#define BDB_DRIVER_NO_LVDS 0
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index bc5f38112619..3cce60bf2ee2 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -526,25 +526,30 @@ static void dump_general_definitions(struct context *context,
static void dump_legacy_child_devices(struct context *context,
const struct bdb_block *block)
{
- const struct bdb_child_devices *child_devs = block->data;
- const struct legacy_child_device_config *child;
+ const struct bdb_legacy_child_devices *defs = block->data;
+ struct child_device_config *child;
int i;
+ int child_device_num;
- for (i = 0; i < DEVICE_CHILD_SIZE; i++) {
- child = &child_devs->children[i];
- /* Skip nonexistent children */
- if (!child->device_type)
- continue;
- printf("\tChild device %d\n", i);
- printf("\t\tType: 0x%04x (%s)\n", child->device_type,
- child_device_type(child->device_type));
- printf("\t\tDVO port: 0x%02x\n", child->dvo_port);
- printf("\t\tI2C pin: 0x%02x\n", child->i2c_pin);
- printf("\t\tSlave addr: 0x%02x\n", child->slave_addr);
- printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
- printf("\t\tDVO config: 0x%02x\n", child->dvo_cfg);
- printf("\t\tDVO wiring: 0x%02x\n", child->dvo_wiring);
+ printf("\tChild device size: %d\n", defs->child_dev_size);
+ child_device_num = (block->size - sizeof(*defs)) /
+ defs->child_dev_size;
+
+ /*
+ * Use a temp buffer so dump_child_device() doesn't have to worry about
+ * accessing the struct beyond child_dev_size. The tail, if any, remains
+ * initialized to zero.
+ */
+ child = calloc(1, sizeof(*child));
+
+ for (i = 0; i < child_device_num; i++) {
+ memcpy(child, &defs->devices[i * defs->child_dev_size],
+ min(sizeof(*child), defs->child_dev_size));
+
+ dump_child_device(context, child);
}
+
+ free(child);
}
static void dump_lvds_options(struct context *context,
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH i-g-t 7/8] tools/intel_vbt_decode: dump more child device data for version < 152
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
` (5 preceding siblings ...)
2017-10-19 15:22 ` [PATCH i-g-t 6/8] tools/intel_vbt_decode: unify legacy child device block dumping Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 15:22 ` [PATCH i-g-t 8/8] tools/intel_vbt_decode: abstract child devices printing more Jani Nikula
2017-10-19 16:52 ` ✗ Fi.CI.BAT: failure for tools/intel_vbt_decode: refactoring and cleanups Patchwork
8 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
There's no evidence that this is the limit.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_vbt_decode.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index 3cce60bf2ee2..ebc65b82bbde 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -431,9 +431,6 @@ static void dump_child_device(struct context *context,
printf("\t\tAIM offset: %d\n", child->addin_offset);
printf("\t\tDVO Port: 0x%02x (%s)\n", child->dvo_port, dvo_port(child->dvo_port));
- if (context->bdb->version < 152)
- return;
-
printf("\t\tAIM I2C pin: 0x%02x\n", child->i2c_pin);
printf("\t\tAIM Slave address: 0x%02x\n", child->slave_addr);
printf("\t\tDDC pin: 0x%02x\n", child->ddc_pin);
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH i-g-t 8/8] tools/intel_vbt_decode: abstract child devices printing more
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
` (6 preceding siblings ...)
2017-10-19 15:22 ` [PATCH i-g-t 7/8] tools/intel_vbt_decode: dump more child device data for version < 152 Jani Nikula
@ 2017-10-19 15:22 ` Jani Nikula
2017-10-19 16:52 ` ✗ Fi.CI.BAT: failure for tools/intel_vbt_decode: refactoring and cleanups Patchwork
8 siblings, 0 replies; 15+ messages in thread
From: Jani Nikula @ 2017-10-19 15:22 UTC (permalink / raw)
To: intel-gfx; +Cc: jani.nikula
Unify the common code for current and legacy blocks.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
tools/intel_vbt_decode.c | 70 +++++++++++++++++++++---------------------------
1 file changed, 31 insertions(+), 39 deletions(-)
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index ebc65b82bbde..04f733c8cb06 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -483,25 +483,12 @@ static void dump_child_device(struct context *context,
}
}
-static void dump_general_definitions(struct context *context,
- const struct bdb_block *block)
+
+static void dump_child_devices(struct context *context, const uint8_t *devices,
+ uint8_t child_dev_num, uint8_t child_dev_size)
{
- const struct bdb_general_definitions *defs = block->data;
struct child_device_config *child;
int i;
- int child_device_num;
-
- printf("\tCRT DDC GMBUS addr: 0x%02x\n", defs->crt_ddc_gmbus_pin);
- printf("\tUse ACPI DPMS CRT power states: %s\n",
- YESNO(defs->dpms_acpi));
- printf("\tSkip CRT detect at boot: %s\n",
- YESNO(defs->skip_boot_crt_detect));
- printf("\tUse DPMS on AIM devices: %s\n", YESNO(defs->dpms_aim));
- printf("\tBoot display type: 0x%02x%02x\n", defs->boot_display[1],
- defs->boot_display[0]);
- printf("\tChild device size: %d\n", defs->child_dev_size);
- child_device_num = (block->size - sizeof(*defs)) /
- defs->child_dev_size;
/*
* Use a temp buffer so dump_child_device() doesn't have to worry about
@@ -510,9 +497,9 @@ static void dump_general_definitions(struct context *context,
*/
child = calloc(1, sizeof(*child));
- for (i = 0; i < child_device_num; i++) {
- memcpy(child, &defs->devices[i * defs->child_dev_size],
- min(sizeof(*child), defs->child_dev_size));
+ for (i = 0; i < child_dev_num; i++) {
+ memcpy(child, devices + i * child_dev_size,
+ min(sizeof(*child), child_dev_size));
dump_child_device(context, child);
}
@@ -520,33 +507,38 @@ static void dump_general_definitions(struct context *context,
free(child);
}
-static void dump_legacy_child_devices(struct context *context,
- const struct bdb_block *block)
+static void dump_general_definitions(struct context *context,
+ const struct bdb_block *block)
{
- const struct bdb_legacy_child_devices *defs = block->data;
- struct child_device_config *child;
- int i;
- int child_device_num;
+ const struct bdb_general_definitions *defs = block->data;
+ int child_dev_num;
+ printf("\tCRT DDC GMBUS addr: 0x%02x\n", defs->crt_ddc_gmbus_pin);
+ printf("\tUse ACPI DPMS CRT power states: %s\n",
+ YESNO(defs->dpms_acpi));
+ printf("\tSkip CRT detect at boot: %s\n",
+ YESNO(defs->skip_boot_crt_detect));
+ printf("\tUse DPMS on AIM devices: %s\n", YESNO(defs->dpms_aim));
+ printf("\tBoot display type: 0x%02x%02x\n", defs->boot_display[1],
+ defs->boot_display[0]);
printf("\tChild device size: %d\n", defs->child_dev_size);
- child_device_num = (block->size - sizeof(*defs)) /
- defs->child_dev_size;
- /*
- * Use a temp buffer so dump_child_device() doesn't have to worry about
- * accessing the struct beyond child_dev_size. The tail, if any, remains
- * initialized to zero.
- */
- child = calloc(1, sizeof(*child));
+ child_dev_num = (block->size - sizeof(*defs)) / defs->child_dev_size;
+ dump_child_devices(context, defs->devices,
+ child_dev_num, defs->child_dev_size);
+}
- for (i = 0; i < child_device_num; i++) {
- memcpy(child, &defs->devices[i * defs->child_dev_size],
- min(sizeof(*child), defs->child_dev_size));
+static void dump_legacy_child_devices(struct context *context,
+ const struct bdb_block *block)
+{
+ const struct bdb_legacy_child_devices *defs = block->data;
+ int child_dev_num;
- dump_child_device(context, child);
- }
+ printf("\tChild device size: %d\n", defs->child_dev_size);
- free(child);
+ child_dev_num = (block->size - sizeof(*defs)) / defs->child_dev_size;
+ dump_child_devices(context, defs->devices,
+ child_dev_num, defs->child_dev_size);
}
static void dump_lvds_options(struct context *context,
--
2.11.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 15+ messages in thread
* ✗ Fi.CI.BAT: failure for tools/intel_vbt_decode: refactoring and cleanups
2017-10-19 15:22 [PATCH i-g-t 0/8] tools/intel_vbt_decode: refactoring and cleanups Jani Nikula
` (7 preceding siblings ...)
2017-10-19 15:22 ` [PATCH i-g-t 8/8] tools/intel_vbt_decode: abstract child devices printing more Jani Nikula
@ 2017-10-19 16:52 ` Patchwork
8 siblings, 0 replies; 15+ messages in thread
From: Patchwork @ 2017-10-19 16:52 UTC (permalink / raw)
To: Jani Nikula; +Cc: intel-gfx
== Series Details ==
Series: tools/intel_vbt_decode: refactoring and cleanups
URL : https://patchwork.freedesktop.org/series/32302/
State : failure
== Summary ==
IGT patchset tested on top of latest successful build
abc08cba366a64a07f7f4deb167ae7d6ae059958 lib: Free all internal buffers before measuring available memory
with latest DRM-Tip kernel build CI_DRM_3266
9024f1a2827a drm-tip: 2017y-10m-19d-12h-57m-03s UTC integration manifest
No testlist changes.
Test chamelium:
Subgroup dp-crc-fast:
pass -> FAIL (fi-kbl-7500u) fdo#102514
Test kms_busy:
Subgroup basic-flip-b:
fail -> PASS (fi-gdg-551) fdo#102654
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-legacy:
fail -> PASS (fi-gdg-551) fdo#102618
Subgroup basic-flip-after-cursor-varying-size:
incomplete -> PASS (fi-skl-6260u)
Test kms_flip:
Subgroup basic-plain-flip:
pass -> INCOMPLETE (fi-skl-6700hq)
fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#102654 https://bugs.freedesktop.org/show_bug.cgi?id=102654
fdo#102618 https://bugs.freedesktop.org/show_bug.cgi?id=102618
fi-bdw-5557u total:289 pass:268 dwarn:0 dfail:0 fail:0 skip:21 time:444s
fi-bdw-gvtdvm total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:458s
fi-blb-e6850 total:289 pass:223 dwarn:1 dfail:0 fail:0 skip:65 time:375s
fi-bsw-n3050 total:289 pass:243 dwarn:0 dfail:0 fail:0 skip:46 time:539s
fi-bwr-2160 total:289 pass:183 dwarn:0 dfail:0 fail:0 skip:106 time:267s
fi-bxt-dsi total:289 pass:259 dwarn:0 dfail:0 fail:0 skip:30 time:502s
fi-bxt-j4205 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:500s
fi-byt-j1900 total:289 pass:253 dwarn:1 dfail:0 fail:0 skip:35 time:495s
fi-byt-n2820 total:289 pass:249 dwarn:1 dfail:0 fail:0 skip:39 time:489s
fi-cfl-s total:289 pass:253 dwarn:4 dfail:0 fail:0 skip:32 time:546s
fi-elk-e7500 total:289 pass:229 dwarn:0 dfail:0 fail:0 skip:60 time:412s
fi-gdg-551 total:289 pass:178 dwarn:1 dfail:0 fail:1 skip:109 time:253s
fi-glk-1 total:289 pass:261 dwarn:0 dfail:0 fail:0 skip:28 time:579s
fi-hsw-4770 total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:451s
fi-hsw-4770r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:428s
fi-ilk-650 total:289 pass:228 dwarn:0 dfail:0 fail:0 skip:61 time:437s
fi-ivb-3520m total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:482s
fi-ivb-3770 total:289 pass:260 dwarn:0 dfail:0 fail:0 skip:29 time:461s
fi-kbl-7500u total:289 pass:263 dwarn:1 dfail:0 fail:1 skip:24 time:483s
fi-kbl-7560u total:289 pass:270 dwarn:0 dfail:0 fail:0 skip:19 time:572s
fi-kbl-7567u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:477s
fi-kbl-r total:289 pass:262 dwarn:0 dfail:0 fail:0 skip:27 time:585s
fi-pnv-d510 total:289 pass:222 dwarn:1 dfail:0 fail:0 skip:66 time:545s
fi-skl-6260u total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:453s
fi-skl-6700hq total:220 pass:199 dwarn:0 dfail:0 fail:0 skip:20
fi-skl-6700k total:289 pass:265 dwarn:0 dfail:0 fail:0 skip:24 time:515s
fi-skl-6770hq total:289 pass:269 dwarn:0 dfail:0 fail:0 skip:20 time:506s
fi-skl-gvtdvm total:289 pass:266 dwarn:0 dfail:0 fail:0 skip:23 time:454s
fi-snb-2520m total:289 pass:250 dwarn:0 dfail:0 fail:0 skip:39 time:569s
fi-snb-2600 total:289 pass:249 dwarn:0 dfail:0 fail:0 skip:40 time:425s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_389/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 15+ messages in thread