* [PATCH v3] arm64: dts: ls1088a: Add USB support
@ 2017-10-24 9:31 ` yinbo.zhu-3arQi8VN3Tc
0 siblings, 0 replies; 6+ messages in thread
From: yinbo.zhu @ 2017-10-24 9:31 UTC (permalink / raw)
To: yinbo.zhu, linux-devel, Rob Herring, Mark Rutland, Russell King,
Felipe Balbi
Cc: Greg Kroah-Hartman, Mathias Nyman,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list,
open list:DESIGNWARE USB3 DRD IP DRIVER
From: "yinbo.zhu" <yinbo.zhu@nxp.com>
Fix the issue that usb is not detected on ls1088ardb
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v3:
- Change status from "enable" to "disabled" then enable it on dts file.
- Add the version history.
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 213abb72de93..6c3c3bc4b681 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -118,6 +118,14 @@
status = "okay";
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c144d06a6e33..c23fede8cf5d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -359,6 +359,26 @@
status = "disabled";
};
+ usb0: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
+ usb1: usb3@3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1088a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
--
2.14.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3] arm64: dts: ls1088a: Add USB support
@ 2017-10-24 9:31 ` yinbo.zhu-3arQi8VN3Tc
0 siblings, 0 replies; 6+ messages in thread
From: yinbo.zhu-3arQi8VN3Tc @ 2017-10-24 9:31 UTC (permalink / raw)
To: yinbo.zhu-3arQi8VN3Tc,
linux-devel-XDVM779Km55Y1YpKYGMr2+TW4wlIGRCZ, Rob Herring,
Mark Rutland, Russell King, Felipe Balbi
Cc: Greg Kroah-Hartman, Mathias Nyman,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list,
open list:DESIGNWARE USB3 DRD IP DRIVER
From: "yinbo.zhu" <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
Fix the issue that usb is not detected on ls1088ardb
Signed-off-by: yinbo.zhu <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
Signed-off-by: Ran Wang <ran.wang_1-3arQi8VN3Tc@public.gmane.org>
---
Change in v3:
- Change status from "enable" to "disabled" then enable it on dts file.
- Add the version history.
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 213abb72de93..6c3c3bc4b681 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -118,6 +118,14 @@
status = "okay";
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c144d06a6e33..c23fede8cf5d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -359,6 +359,26 @@
status = "disabled";
};
+ usb0: usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
+ usb1: usb3@3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1088a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3] arm64: dts: ls1088a: Add USB support
@ 2017-10-24 9:31 ` yinbo.zhu-3arQi8VN3Tc
0 siblings, 0 replies; 6+ messages in thread
From: yinbo.zhu at nxp.com @ 2017-10-24 9:31 UTC (permalink / raw)
To: linux-arm-kernel
From: "yinbo.zhu" <yinbo.zhu@nxp.com>
Fix the issue that usb is not detected on ls1088ardb
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v3:
- Change status from "enable" to "disabled" then enable it on dts file.
- Add the version history.
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 213abb72de93..6c3c3bc4b681 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -118,6 +118,14 @@
status = "okay";
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c144d06a6e33..c23fede8cf5d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -359,6 +359,26 @@
status = "disabled";
};
+ usb0: usb3 at 3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
+ usb1: usb3 at 3110000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ status = "disabled";
+ };
+
sata: sata at 3200000 {
compatible = "fsl,ls1088a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
--
2.14.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: dts: ls1088a: Add USB support
@ 2017-10-24 22:26 ` Yang Li
0 siblings, 0 replies; 6+ messages in thread
From: Yang Li @ 2017-10-24 22:26 UTC (permalink / raw)
To: yinbo.zhu
Cc: Rob Herring, Mark Rutland, Russell King, Felipe Balbi,
Greg Kroah-Hartman, Mathias Nyman,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list,
open list:DESIGNWARE USB3 DRD IP DRIVER
On Tue, Oct 24, 2017 at 4:31 AM, <yinbo.zhu@nxp.com> wrote:
> From: "yinbo.zhu" <yinbo.zhu@nxp.com>
>
> Fix the issue that usb is not detected on ls1088ardb
You can only fix issue for a function after the function has been
added previously. So like Shawn commented, this patch is about adding
the USB support instead of fixing an issue.
>
> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
>
> Change in v3:
> - Change status from "enable" to "disabled" then enable it on dts file.
> - Add the version history.
>
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 213abb72de93..6c3c3bc4b681 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -118,6 +118,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index c144d06a6e33..c23fede8cf5d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -359,6 +359,26 @@
> status = "disabled";
> };
>
> + usb0: usb3@3100000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> + usb1: usb3@3110000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> sata: sata@3200000 {
> compatible = "fsl,ls1088a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 2.14.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: dts: ls1088a: Add USB support
@ 2017-10-24 22:26 ` Yang Li
0 siblings, 0 replies; 6+ messages in thread
From: Yang Li @ 2017-10-24 22:26 UTC (permalink / raw)
To: yinbo.zhu-3arQi8VN3Tc
Cc: Rob Herring, Mark Rutland, Russell King, Felipe Balbi,
Greg Kroah-Hartman, Mathias Nyman,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list,
open list:DESIGNWARE USB3 DRD IP DRIVER
On Tue, Oct 24, 2017 at 4:31 AM, <yinbo.zhu-3arQi8VN3Tc@public.gmane.org> wrote:
> From: "yinbo.zhu" <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
>
> Fix the issue that usb is not detected on ls1088ardb
You can only fix issue for a function after the function has been
added previously. So like Shawn commented, this patch is about adding
the USB support instead of fixing an issue.
>
> Signed-off-by: yinbo.zhu <yinbo.zhu-3arQi8VN3Tc@public.gmane.org>
> Signed-off-by: Ran Wang <ran.wang_1-3arQi8VN3Tc@public.gmane.org>
> ---
>
> Change in v3:
> - Change status from "enable" to "disabled" then enable it on dts file.
> - Add the version history.
>
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 213abb72de93..6c3c3bc4b681 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -118,6 +118,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index c144d06a6e33..c23fede8cf5d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -359,6 +359,26 @@
> status = "disabled";
> };
>
> + usb0: usb3@3100000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> + usb1: usb3@3110000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> sata: sata@3200000 {
> compatible = "fsl,ls1088a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 2.14.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3] arm64: dts: ls1088a: Add USB support
@ 2017-10-24 22:26 ` Yang Li
0 siblings, 0 replies; 6+ messages in thread
From: Yang Li @ 2017-10-24 22:26 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 24, 2017 at 4:31 AM, <yinbo.zhu@nxp.com> wrote:
> From: "yinbo.zhu" <yinbo.zhu@nxp.com>
>
> Fix the issue that usb is not detected on ls1088ardb
You can only fix issue for a function after the function has been
added previously. So like Shawn commented, this patch is about adding
the USB support instead of fixing an issue.
>
> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
> Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
> ---
>
> Change in v3:
> - Change status from "enable" to "disabled" then enable it on dts file.
> - Add the version history.
>
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 213abb72de93..6c3c3bc4b681 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -118,6 +118,14 @@
> status = "okay";
> };
>
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> &esdhc {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> index c144d06a6e33..c23fede8cf5d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> @@ -359,6 +359,26 @@
> status = "disabled";
> };
>
> + usb0: usb3 at 3100000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> + usb1: usb3 at 3110000 {
> + compatible = "snps,dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
> + dr_mode = "host";
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,dis_rxdet_inp3_quirk;
> + status = "disabled";
> + };
> +
> sata: sata at 3200000 {
> compatible = "fsl,ls1088a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 2.14.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-10-24 22:26 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-24 9:31 [PATCH v3] arm64: dts: ls1088a: Add USB support yinbo.zhu
2017-10-24 9:31 ` yinbo.zhu at nxp.com
2017-10-24 9:31 ` yinbo.zhu-3arQi8VN3Tc
2017-10-24 22:26 ` Yang Li
2017-10-24 22:26 ` Yang Li
2017-10-24 22:26 ` Yang Li
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.