From: Alex Elder <elder@linaro.org> To: gregkh@linuxfoundation.org, stern@rowland.harvard.edu, balbi@kernel.org Cc: manjunath.goudar@linaro.org, bjorn.andersson@linaro.org, Linyu.Yuan@alcatel-sbell.com.cn, andy.gross@linaro.org, tony@atomide.com, linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 3/3] usb: phy: remove phy-qcom-8x16-usb.c Date: Thu, 26 Oct 2017 08:48:27 -0500 [thread overview] Message-ID: <20171026134827.615-4-elder@linaro.org> (raw) In-Reply-To: <20171026134827.615-1-elder@linaro.org> No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver support any more, so remove the code. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> --- v2: Update the Kconfig file so it no longer offers to build this code, as suggested by Felipe Balbi. drivers/usb/phy/Kconfig | 14 -- drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-qcom-8x16-usb.c | 366 ------------------------------------ 3 files changed, 381 deletions(-) delete mode 100644 drivers/usb/phy/phy-qcom-8x16-usb.c diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index f5775e5c9f52..0f8ab981d572 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -137,20 +137,6 @@ config USB_ISP1301 To compile this driver as a module, choose M here: the module will be called phy-isp1301. -config USB_QCOM_8X16_PHY - tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support" - depends on ARCH_QCOM || COMPILE_TEST - depends on RESET_CONTROLLER - select USB_PHY - select USB_ULPI_VIEWPORT - help - Enable this to support the USB transceiver on Qualcomm 8x16 chipsets. - It handles PHY initialization, clock management, power management, - and workarounds required after resetting the hardware. - - To compile this driver as a module, choose M here: the - module will be called phy-qcom-8x16-usb. - config USB_MV_OTG tristate "Marvell USB OTG support" depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 61013f38abbe..8beefb7f2777 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o -obj-$(CONFIG_USB_QCOM_8X16_PHY) += phy-qcom-8x16-usb.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o obj-$(CONFIG_USB_ULPI) += phy-ulpi.o diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c deleted file mode 100644 index 679afeaaa9a8..000000000000 --- a/drivers/usb/phy/phy-qcom-8x16-usb.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (c) 2015, Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/extcon.h> -#include <linux/gpio/consumer.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/reboot.h> -#include <linux/regulator/consumer.h> -#include <linux/reset.h> -#include <linux/slab.h> -#include <linux/usb.h> -#include <linux/usb/ulpi.h> - -#define HSPHY_AHBBURST 0x0090 -#define HSPHY_AHBMODE 0x0098 -#define HSPHY_GENCONFIG 0x009c -#define HSPHY_GENCONFIG_2 0x00a0 - -#define HSPHY_USBCMD 0x0140 -#define HSPHY_ULPI_VIEWPORT 0x0170 -#define HSPHY_CTRL 0x0240 - -#define HSPHY_TXFIFO_IDLE_FORCE_DIS BIT(4) -#define HSPHY_SESS_VLD_CTRL_EN BIT(7) -#define HSPHY_POR_ASSERT BIT(0) -#define HSPHY_RETEN BIT(1) - -#define HSPHY_SESS_VLD_CTRL BIT(25) - -#define ULPI_PWR_CLK_MNG_REG 0x88 -#define ULPI_PWR_OTG_COMP_DISABLE BIT(0) - -#define ULPI_MISC_A 0x96 -#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) -#define ULPI_MISC_A_VBUSVLDEXT BIT(0) - -#define HSPHY_3P3_MIN 3050000 /* uV */ -#define HSPHY_3P3_MAX 3300000 /* uV */ - -#define HSPHY_1P8_MIN 1800000 /* uV */ -#define HSPHY_1P8_MAX 1800000 /* uV */ - -#define HSPHY_VDD_MIN 5 -#define HSPHY_VDD_MAX 7 - -struct phy_8x16 { - struct usb_phy phy; - void __iomem *regs; - struct clk *core_clk; - struct clk *iface_clk; - struct regulator_bulk_data regulator[3]; - - struct reset_control *phy_reset; - - struct gpio_desc *switch_gpio; - struct notifier_block reboot_notify; -}; - -static int phy_8x16_notify_connect(struct usb_phy *phy, - enum usb_device_speed speed) -{ - struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); - u32 val; - - val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; - usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A)); - - val = readl(qphy->regs + HSPHY_USBCMD); - val |= HSPHY_SESS_VLD_CTRL; - writel(val, qphy->regs + HSPHY_USBCMD); - - return 0; -} - -static int phy_8x16_notify_disconnect(struct usb_phy *phy, - enum usb_device_speed speed) -{ - struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); - u32 val; - - val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; - usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A)); - - val = readl(qphy->regs + HSPHY_USBCMD); - val &= ~HSPHY_SESS_VLD_CTRL; - writel(val, qphy->regs + HSPHY_USBCMD); - - return 0; -} - -static int phy_8x16_vbus_on(struct phy_8x16 *qphy) -{ - phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN); - - /* Switch D+/D- lines to Device connector */ - gpiod_set_value_cansleep(qphy->switch_gpio, 0); - - return 0; -} - -static int phy_8x16_vbus_off(struct phy_8x16 *qphy) -{ - phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN); - - /* Switch D+/D- lines to USB HUB */ - gpiod_set_value_cansleep(qphy->switch_gpio, 1); - - return 0; -} - -static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event, - void *ptr) -{ - struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb); - struct phy_8x16 *qphy = container_of(usb_phy, struct phy_8x16, phy); - - if (event) - phy_8x16_vbus_on(qphy); - else - phy_8x16_vbus_off(qphy); - - return NOTIFY_DONE; -} - -static int phy_8x16_init(struct usb_phy *phy) -{ - struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); - u32 val, init[] = {0x44, 0x6B, 0x24, 0x13}; - u32 addr = ULPI_EXT_VENDOR_SPECIFIC; - int idx, state; - - for (idx = 0; idx < ARRAY_SIZE(init); idx++) - usb_phy_io_write(phy, init[idx], addr + idx); - - reset_control_reset(qphy->phy_reset); - - /* Assert USB HSPHY_POR */ - val = readl(qphy->regs + HSPHY_CTRL); - val |= HSPHY_POR_ASSERT; - writel(val, qphy->regs + HSPHY_CTRL); - - /* - * wait for minimum 10 microseconds as suggested in HPG. - * Use a slightly larger value since the exact value didn't - * work 100% of the time. - */ - usleep_range(12, 15); - - /* Deassert USB HSPHY_POR */ - val = readl(qphy->regs + HSPHY_CTRL); - val &= ~HSPHY_POR_ASSERT; - writel(val, qphy->regs + HSPHY_CTRL); - - usleep_range(10, 15); - - writel(0x00, qphy->regs + HSPHY_AHBBURST); - writel(0x08, qphy->regs + HSPHY_AHBMODE); - - /* workaround for rx buffer collision issue */ - val = readl(qphy->regs + HSPHY_GENCONFIG); - val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS; - writel(val, qphy->regs + HSPHY_GENCONFIG); - - val = readl(qphy->regs + HSPHY_GENCONFIG_2); - val |= HSPHY_SESS_VLD_CTRL_EN; - writel(val, qphy->regs + HSPHY_GENCONFIG_2); - - val = ULPI_PWR_OTG_COMP_DISABLE; - usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG)); - - state = extcon_get_state(qphy->phy.edev, EXTCON_USB); - if (state) - phy_8x16_vbus_on(qphy); - else - phy_8x16_vbus_off(qphy); - - val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL); - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; - val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; - usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL); - - return 0; -} - -static void phy_8x16_shutdown(struct usb_phy *phy) -{ - u32 val; - - /* Put the controller in non-driving mode */ - val = usb_phy_io_read(phy, ULPI_FUNC_CTRL); - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; - val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - usb_phy_io_write(phy, val, ULPI_FUNC_CTRL); -} - -static int phy_8x16_read_devicetree(struct phy_8x16 *qphy) -{ - struct device *dev = qphy->phy.dev; - int ret; - - qphy->core_clk = devm_clk_get(dev, "core"); - if (IS_ERR(qphy->core_clk)) - return PTR_ERR(qphy->core_clk); - - qphy->iface_clk = devm_clk_get(dev, "iface"); - if (IS_ERR(qphy->iface_clk)) - return PTR_ERR(qphy->iface_clk); - - qphy->regulator[0].supply = "v3p3"; - qphy->regulator[1].supply = "v1p8"; - qphy->regulator[2].supply = "vddcx"; - - ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator), - qphy->regulator); - if (ret) - return ret; - - qphy->phy_reset = devm_reset_control_get(dev, "phy"); - if (IS_ERR(qphy->phy_reset)) - return PTR_ERR(qphy->phy_reset); - - qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch", - GPIOD_OUT_LOW); - return PTR_ERR_OR_ZERO(qphy->switch_gpio); -} - -static int phy_8x16_reboot_notify(struct notifier_block *this, - unsigned long code, void *unused) -{ - struct phy_8x16 *qphy; - - qphy = container_of(this, struct phy_8x16, reboot_notify); - - /* - * Ensure that D+/D- lines are routed to uB connector, so - * we could load bootloader/kernel at next reboot_notify - */ - gpiod_set_value_cansleep(qphy->switch_gpio, 0); - return NOTIFY_DONE; -} - -static int phy_8x16_probe(struct platform_device *pdev) -{ - struct phy_8x16 *qphy; - struct resource *res; - struct usb_phy *phy; - int ret; - - qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL); - if (!qphy) - return -ENOMEM; - - platform_set_drvdata(pdev, qphy); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - qphy->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(qphy->regs)) - return PTR_ERR(qphy->regs); - - phy = &qphy->phy; - phy->dev = &pdev->dev; - phy->label = dev_name(&pdev->dev); - phy->init = phy_8x16_init; - phy->shutdown = phy_8x16_shutdown; - phy->notify_connect = phy_8x16_notify_connect; - phy->notify_disconnect = phy_8x16_notify_disconnect; - phy->io_priv = qphy->regs + HSPHY_ULPI_VIEWPORT; - phy->io_ops = &ulpi_viewport_access_ops; - phy->type = USB_PHY_TYPE_USB2; - phy->vbus_nb.notifier_call = phy_8x16_vbus_notify; - phy->id_nb.notifier_call = NULL; - - ret = phy_8x16_read_devicetree(qphy); - if (ret < 0) - return ret; - - ret = clk_set_rate(qphy->core_clk, INT_MAX); - if (ret < 0) - dev_dbg(phy->dev, "Can't boost core clock\n"); - - ret = clk_prepare_enable(qphy->core_clk); - if (ret < 0) - return ret; - - ret = clk_prepare_enable(qphy->iface_clk); - if (ret < 0) - goto off_core; - - ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator), - qphy->regulator); - if (WARN_ON(ret)) - goto off_clks; - - ret = usb_add_phy_dev(&qphy->phy); - if (ret) - goto off_power; - - qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify; - register_reboot_notifier(&qphy->reboot_notify); - - return 0; - -off_power: - regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); -off_clks: - clk_disable_unprepare(qphy->iface_clk); -off_core: - clk_disable_unprepare(qphy->core_clk); - return ret; -} - -static int phy_8x16_remove(struct platform_device *pdev) -{ - struct phy_8x16 *qphy = platform_get_drvdata(pdev); - - unregister_reboot_notifier(&qphy->reboot_notify); - - /* - * Ensure that D+/D- lines are routed to uB connector, so - * we could load bootloader/kernel at next reboot_notify - */ - gpiod_set_value_cansleep(qphy->switch_gpio, 0); - - usb_remove_phy(&qphy->phy); - - clk_disable_unprepare(qphy->iface_clk); - clk_disable_unprepare(qphy->core_clk); - regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); - return 0; -} - -static const struct of_device_id phy_8x16_dt_match[] = { - { .compatible = "qcom,usb-8x16-phy" }, - { } -}; -MODULE_DEVICE_TABLE(of, phy_8x16_dt_match); - -static struct platform_driver phy_8x16_driver = { - .probe = phy_8x16_probe, - .remove = phy_8x16_remove, - .driver = { - .name = "phy-qcom-8x16-usb", - .of_match_table = phy_8x16_dt_match, - }, -}; -module_platform_driver(phy_8x16_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver"); -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: elder@linaro.org (Alex Elder) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/3] usb: phy: remove phy-qcom-8x16-usb.c Date: Thu, 26 Oct 2017 08:48:27 -0500 [thread overview] Message-ID: <20171026134827.615-4-elder@linaro.org> (raw) In-Reply-To: <20171026134827.615-1-elder@linaro.org> No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver support any more, so remove the code. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alex Elder <elder@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> --- v2: Update the Kconfig file so it no longer offers to build this code, as suggested by Felipe Balbi. drivers/usb/phy/Kconfig | 14 -- drivers/usb/phy/Makefile | 1 - drivers/usb/phy/phy-qcom-8x16-usb.c | 366 ------------------------------------ 3 files changed, 381 deletions(-) delete mode 100644 drivers/usb/phy/phy-qcom-8x16-usb.c diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index f5775e5c9f52..0f8ab981d572 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -137,20 +137,6 @@ config USB_ISP1301 To compile this driver as a module, choose M here: the module will be called phy-isp1301. -config USB_QCOM_8X16_PHY - tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support" - depends on ARCH_QCOM || COMPILE_TEST - depends on RESET_CONTROLLER - select USB_PHY - select USB_ULPI_VIEWPORT - help - Enable this to support the USB transceiver on Qualcomm 8x16 chipsets. - It handles PHY initialization, clock management, power management, - and workarounds required after resetting the hardware. - - To compile this driver as a module, choose M here: the - module will be called phy-qcom-8x16-usb. - config USB_MV_OTG tristate "Marvell USB OTG support" depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 61013f38abbe..8beefb7f2777 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o -obj-$(CONFIG_USB_QCOM_8X16_PHY) += phy-qcom-8x16-usb.o obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o obj-$(CONFIG_USB_ULPI) += phy-ulpi.o diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c deleted file mode 100644 index 679afeaaa9a8..000000000000 --- a/drivers/usb/phy/phy-qcom-8x16-usb.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (c) 2015, Linaro Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/extcon.h> -#include <linux/gpio/consumer.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/reboot.h> -#include <linux/regulator/consumer.h> -#include <linux/reset.h> -#include <linux/slab.h> -#include <linux/usb.h> -#include <linux/usb/ulpi.h> - -#define HSPHY_AHBBURST 0x0090 -#define HSPHY_AHBMODE 0x0098 -#define HSPHY_GENCONFIG 0x009c -#define HSPHY_GENCONFIG_2 0x00a0 - -#define HSPHY_USBCMD 0x0140 -#define HSPHY_ULPI_VIEWPORT 0x0170 -#define HSPHY_CTRL 0x0240 - -#define HSPHY_TXFIFO_IDLE_FORCE_DIS BIT(4) -#define HSPHY_SESS_VLD_CTRL_EN BIT(7) -#define HSPHY_POR_ASSERT BIT(0) -#define HSPHY_RETEN BIT(1) - -#define HSPHY_SESS_VLD_CTRL BIT(25) - -#define ULPI_PWR_CLK_MNG_REG 0x88 -#define ULPI_PWR_OTG_COMP_DISABLE BIT(0) - -#define ULPI_MISC_A 0x96 -#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) -#define ULPI_MISC_A_VBUSVLDEXT BIT(0) - -#define HSPHY_3P3_MIN 3050000 /* uV */ -#define HSPHY_3P3_MAX 3300000 /* uV */ - -#define HSPHY_1P8_MIN 1800000 /* uV */ -#define HSPHY_1P8_MAX 1800000 /* uV */ - -#define HSPHY_VDD_MIN 5 -#define HSPHY_VDD_MAX 7 - -struct phy_8x16 { - struct usb_phy phy; - void __iomem *regs; - struct clk *core_clk; - struct clk *iface_clk; - struct regulator_bulk_data regulator[3]; - - struct reset_control *phy_reset; - - struct gpio_desc *switch_gpio; - struct notifier_block reboot_notify; -}; - -static int phy_8x16_notify_connect(struct usb_phy *phy, - enum usb_device_speed speed) -{ - struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); - u32 val; - - val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; - usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A)); - - val = readl(qphy->regs + HSPHY_USBCMD); - val |= HSPHY_SESS_VLD_CTRL; - writel(val, qphy->regs + HSPHY_USBCMD); - - return 0; -} - -static int phy_8x16_notify_disconnect(struct usb_phy *phy, - enum usb_device_speed speed) -{ - struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); - u32 val; - - val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; - usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A)); - - val = readl(qphy->regs + HSPHY_USBCMD); - val &= ~HSPHY_SESS_VLD_CTRL; - writel(val, qphy->regs + HSPHY_USBCMD); - - return 0; -} - -static int phy_8x16_vbus_on(struct phy_8x16 *qphy) -{ - phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN); - - /* Switch D+/D- lines to Device connector */ - gpiod_set_value_cansleep(qphy->switch_gpio, 0); - - return 0; -} - -static int phy_8x16_vbus_off(struct phy_8x16 *qphy) -{ - phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN); - - /* Switch D+/D- lines to USB HUB */ - gpiod_set_value_cansleep(qphy->switch_gpio, 1); - - return 0; -} - -static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event, - void *ptr) -{ - struct usb_phy *usb_phy = container_of(nb, struct usb_phy, vbus_nb); - struct phy_8x16 *qphy = container_of(usb_phy, struct phy_8x16, phy); - - if (event) - phy_8x16_vbus_on(qphy); - else - phy_8x16_vbus_off(qphy); - - return NOTIFY_DONE; -} - -static int phy_8x16_init(struct usb_phy *phy) -{ - struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy); - u32 val, init[] = {0x44, 0x6B, 0x24, 0x13}; - u32 addr = ULPI_EXT_VENDOR_SPECIFIC; - int idx, state; - - for (idx = 0; idx < ARRAY_SIZE(init); idx++) - usb_phy_io_write(phy, init[idx], addr + idx); - - reset_control_reset(qphy->phy_reset); - - /* Assert USB HSPHY_POR */ - val = readl(qphy->regs + HSPHY_CTRL); - val |= HSPHY_POR_ASSERT; - writel(val, qphy->regs + HSPHY_CTRL); - - /* - * wait for minimum 10 microseconds as suggested in HPG. - * Use a slightly larger value since the exact value didn't - * work 100% of the time. - */ - usleep_range(12, 15); - - /* Deassert USB HSPHY_POR */ - val = readl(qphy->regs + HSPHY_CTRL); - val &= ~HSPHY_POR_ASSERT; - writel(val, qphy->regs + HSPHY_CTRL); - - usleep_range(10, 15); - - writel(0x00, qphy->regs + HSPHY_AHBBURST); - writel(0x08, qphy->regs + HSPHY_AHBMODE); - - /* workaround for rx buffer collision issue */ - val = readl(qphy->regs + HSPHY_GENCONFIG); - val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS; - writel(val, qphy->regs + HSPHY_GENCONFIG); - - val = readl(qphy->regs + HSPHY_GENCONFIG_2); - val |= HSPHY_SESS_VLD_CTRL_EN; - writel(val, qphy->regs + HSPHY_GENCONFIG_2); - - val = ULPI_PWR_OTG_COMP_DISABLE; - usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG)); - - state = extcon_get_state(qphy->phy.edev, EXTCON_USB); - if (state) - phy_8x16_vbus_on(qphy); - else - phy_8x16_vbus_off(qphy); - - val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL); - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; - val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; - usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL); - - return 0; -} - -static void phy_8x16_shutdown(struct usb_phy *phy) -{ - u32 val; - - /* Put the controller in non-driving mode */ - val = usb_phy_io_read(phy, ULPI_FUNC_CTRL); - val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; - val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - usb_phy_io_write(phy, val, ULPI_FUNC_CTRL); -} - -static int phy_8x16_read_devicetree(struct phy_8x16 *qphy) -{ - struct device *dev = qphy->phy.dev; - int ret; - - qphy->core_clk = devm_clk_get(dev, "core"); - if (IS_ERR(qphy->core_clk)) - return PTR_ERR(qphy->core_clk); - - qphy->iface_clk = devm_clk_get(dev, "iface"); - if (IS_ERR(qphy->iface_clk)) - return PTR_ERR(qphy->iface_clk); - - qphy->regulator[0].supply = "v3p3"; - qphy->regulator[1].supply = "v1p8"; - qphy->regulator[2].supply = "vddcx"; - - ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator), - qphy->regulator); - if (ret) - return ret; - - qphy->phy_reset = devm_reset_control_get(dev, "phy"); - if (IS_ERR(qphy->phy_reset)) - return PTR_ERR(qphy->phy_reset); - - qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch", - GPIOD_OUT_LOW); - return PTR_ERR_OR_ZERO(qphy->switch_gpio); -} - -static int phy_8x16_reboot_notify(struct notifier_block *this, - unsigned long code, void *unused) -{ - struct phy_8x16 *qphy; - - qphy = container_of(this, struct phy_8x16, reboot_notify); - - /* - * Ensure that D+/D- lines are routed to uB connector, so - * we could load bootloader/kernel at next reboot_notify - */ - gpiod_set_value_cansleep(qphy->switch_gpio, 0); - return NOTIFY_DONE; -} - -static int phy_8x16_probe(struct platform_device *pdev) -{ - struct phy_8x16 *qphy; - struct resource *res; - struct usb_phy *phy; - int ret; - - qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL); - if (!qphy) - return -ENOMEM; - - platform_set_drvdata(pdev, qphy); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - qphy->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(qphy->regs)) - return PTR_ERR(qphy->regs); - - phy = &qphy->phy; - phy->dev = &pdev->dev; - phy->label = dev_name(&pdev->dev); - phy->init = phy_8x16_init; - phy->shutdown = phy_8x16_shutdown; - phy->notify_connect = phy_8x16_notify_connect; - phy->notify_disconnect = phy_8x16_notify_disconnect; - phy->io_priv = qphy->regs + HSPHY_ULPI_VIEWPORT; - phy->io_ops = &ulpi_viewport_access_ops; - phy->type = USB_PHY_TYPE_USB2; - phy->vbus_nb.notifier_call = phy_8x16_vbus_notify; - phy->id_nb.notifier_call = NULL; - - ret = phy_8x16_read_devicetree(qphy); - if (ret < 0) - return ret; - - ret = clk_set_rate(qphy->core_clk, INT_MAX); - if (ret < 0) - dev_dbg(phy->dev, "Can't boost core clock\n"); - - ret = clk_prepare_enable(qphy->core_clk); - if (ret < 0) - return ret; - - ret = clk_prepare_enable(qphy->iface_clk); - if (ret < 0) - goto off_core; - - ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator), - qphy->regulator); - if (WARN_ON(ret)) - goto off_clks; - - ret = usb_add_phy_dev(&qphy->phy); - if (ret) - goto off_power; - - qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify; - register_reboot_notifier(&qphy->reboot_notify); - - return 0; - -off_power: - regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); -off_clks: - clk_disable_unprepare(qphy->iface_clk); -off_core: - clk_disable_unprepare(qphy->core_clk); - return ret; -} - -static int phy_8x16_remove(struct platform_device *pdev) -{ - struct phy_8x16 *qphy = platform_get_drvdata(pdev); - - unregister_reboot_notifier(&qphy->reboot_notify); - - /* - * Ensure that D+/D- lines are routed to uB connector, so - * we could load bootloader/kernel at next reboot_notify - */ - gpiod_set_value_cansleep(qphy->switch_gpio, 0); - - usb_remove_phy(&qphy->phy); - - clk_disable_unprepare(qphy->iface_clk); - clk_disable_unprepare(qphy->core_clk); - regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator); - return 0; -} - -static const struct of_device_id phy_8x16_dt_match[] = { - { .compatible = "qcom,usb-8x16-phy" }, - { } -}; -MODULE_DEVICE_TABLE(of, phy_8x16_dt_match); - -static struct platform_driver phy_8x16_driver = { - .probe = phy_8x16_probe, - .remove = phy_8x16_remove, - .driver = { - .name = "phy-qcom-8x16-usb", - .of_match_table = phy_8x16_dt_match, - }, -}; -module_platform_driver(phy_8x16_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver"); -- 2.11.0
next prev parent reply other threads:[~2017-10-26 13:48 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-26 13:48 [PATCH v2 0/3] usb: remove some unused code Alex Elder 2017-10-26 13:48 ` Alex Elder 2017-10-26 13:48 ` [PATCH v2 1/3] usb: host: remove ehci-msm.c Alex Elder 2017-10-26 13:48 ` Alex Elder 2017-10-26 15:06 ` Alan Stern 2017-10-26 15:06 ` Alan Stern 2017-10-26 15:06 ` Alan Stern 2017-10-30 21:06 ` Bjorn Andersson 2017-10-30 21:06 ` Bjorn Andersson 2017-10-26 13:48 ` [PATCH v2 2/3] usb: phy: remove phy-msm-usb.c Alex Elder 2017-10-26 13:48 ` Alex Elder 2017-10-26 13:48 ` Alex Elder [this message] 2017-10-26 13:48 ` [PATCH v2 3/3] usb: phy: remove phy-qcom-8x16-usb.c Alex Elder
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20171026134827.615-4-elder@linaro.org \ --to=elder@linaro.org \ --cc=Linyu.Yuan@alcatel-sbell.com.cn \ --cc=andy.gross@linaro.org \ --cc=balbi@kernel.org \ --cc=bjorn.andersson@linaro.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=manjunath.goudar@linaro.org \ --cc=stern@rowland.harvard.edu \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.