All of lore.kernel.org
 help / color / mirror / Atom feed
From: Francisco Iglesias <frasse.iglesias@gmail.com>
To: qemu-devel@nongnu.org
Cc: edgari@xilinx.com, alistai@xilinx.com,
	francisco.iglesias@feimtech.se, mar.krzeminski@gmail.com
Subject: [Qemu-devel] [PATCH v6 08/13] xilinx_spips: Make tx/rx_data_bytes more generic and reusable
Date: Wed,  1 Nov 2017 08:16:47 +0100	[thread overview]
Message-ID: <20171101071652.19375-9-frasse.iglesias@gmail.com> (raw)
In-Reply-To: <20171101071652.19375-1-frasse.iglesias@gmail.com>

Make tx/rx_data_bytes more generic so they can be reused (when adding
support for the Zynqmp Generic QSPI).

Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
---
 hw/ssi/xilinx_spips.c | 64 +++++++++++++++++++++++++++++----------------------
 1 file changed, 37 insertions(+), 27 deletions(-)

diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 8634810..e37d005 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -47,7 +47,7 @@
 /* config register */
 #define R_CONFIG            (0x00 / 4)
 #define IFMODE              (1U << 31)
-#define ENDIAN              (1 << 26)
+#define R_CONFIG_ENDIAN     (1 << 26)
 #define MODEFAIL_GEN_EN     (1 << 17)
 #define MAN_START_COM       (1 << 16)
 #define MAN_START_EN        (1 << 15)
@@ -450,13 +450,28 @@ static void xilinx_spips_flush_txfifo(XilinxSPIPS *s)
     }
 }
 
-static inline void rx_data_bytes(XilinxSPIPS *s, uint8_t *value, int max)
+static inline void tx_data_bytes(Fifo8 *fifo, uint32_t value, int num, bool be)
 {
     int i;
+    for (i = 0; i < num && !fifo8_is_full(fifo); ++i) {
+        if (be) {
+            fifo8_push(fifo, (uint8_t)(value >> 24));
+            value <<= 8;
+        } else {
+            fifo8_push(fifo, (uint8_t)value);
+            value >>= 8;
+        }
+    }
+}
 
-    for (i = 0; i < max && !fifo8_is_empty(&s->rx_fifo); ++i) {
-        value[i] = fifo8_pop(&s->rx_fifo);
+static inline int rx_data_bytes(Fifo8 *fifo, uint8_t *value, int max)
+{
+    int i;
+
+    for (i = 0; i < max && !fifo8_is_empty(fifo); ++i) {
+        value[i] = fifo8_pop(fifo);
     }
+    return max - i;
 }
 
 static uint64_t xilinx_spips_read(void *opaque, hwaddr addr,
@@ -466,6 +481,7 @@ static uint64_t xilinx_spips_read(void *opaque, hwaddr addr,
     uint32_t mask = ~0;
     uint32_t ret;
     uint8_t rx_buf[4];
+    int shortfall;
 
     addr >>= 2;
     switch (addr) {
@@ -496,9 +512,13 @@ static uint64_t xilinx_spips_read(void *opaque, hwaddr addr,
         break;
     case R_RX_DATA:
         memset(rx_buf, 0, sizeof(rx_buf));
-        rx_data_bytes(s, rx_buf, s->num_txrx_bytes);
-        ret = s->regs[R_CONFIG] & ENDIAN ? cpu_to_be32(*(uint32_t *)rx_buf)
-                        : cpu_to_le32(*(uint32_t *)rx_buf);
+        shortfall = rx_data_bytes(&s->rx_fifo, rx_buf, s->num_txrx_bytes);
+        ret = s->regs[R_CONFIG] & R_CONFIG_ENDIAN ?
+                        cpu_to_be32(*(uint32_t *)rx_buf) :
+                        cpu_to_le32(*(uint32_t *)rx_buf);
+        if (!(s->regs[R_CONFIG] & R_CONFIG_ENDIAN)) {
+            ret <<= 8 * shortfall;
+        }
         DB_PRINT_L(0, "addr=" TARGET_FMT_plx " = %x\n", addr * 4, ret);
         xilinx_spips_update_ixr(s);
         return ret;
@@ -509,20 +529,6 @@ static uint64_t xilinx_spips_read(void *opaque, hwaddr addr,
 
 }
 
-static inline void tx_data_bytes(XilinxSPIPS *s, uint32_t value, int num)
-{
-    int i;
-    for (i = 0; i < num && !fifo8_is_full(&s->tx_fifo); ++i) {
-        if (s->regs[R_CONFIG] & ENDIAN) {
-            fifo8_push(&s->tx_fifo, (uint8_t)(value >> 24));
-            value <<= 8;
-        } else {
-            fifo8_push(&s->tx_fifo, (uint8_t)value);
-            value >>= 8;
-        }
-    }
-}
-
 static void xilinx_spips_write(void *opaque, hwaddr addr,
                                         uint64_t value, unsigned size)
 {
@@ -563,16 +569,20 @@ static void xilinx_spips_write(void *opaque, hwaddr addr,
         mask = 0;
         break;
     case R_TX_DATA:
-        tx_data_bytes(s, (uint32_t)value, s->num_txrx_bytes);
+        tx_data_bytes(&s->tx_fifo, (uint32_t)value, s->num_txrx_bytes,
+                      s->regs[R_CONFIG] & R_CONFIG_ENDIAN);
         goto no_reg_update;
     case R_TXD1:
-        tx_data_bytes(s, (uint32_t)value, 1);
+        tx_data_bytes(&s->tx_fifo, (uint32_t)value, 1,
+                      s->regs[R_CONFIG] & R_CONFIG_ENDIAN);
         goto no_reg_update;
     case R_TXD2:
-        tx_data_bytes(s, (uint32_t)value, 2);
+        tx_data_bytes(&s->tx_fifo, (uint32_t)value, 2,
+                      s->regs[R_CONFIG] & R_CONFIG_ENDIAN);
         goto no_reg_update;
     case R_TXD3:
-        tx_data_bytes(s, (uint32_t)value, 3);
+        tx_data_bytes(&s->tx_fifo, (uint32_t)value, 3,
+                      s->regs[R_CONFIG] & R_CONFIG_ENDIAN);
         goto no_reg_update;
     }
     s->regs[addr] = (s->regs[addr] & ~mask) | (value & mask);
@@ -682,11 +692,11 @@ static void lqspi_load_cache(void *opaque, hwaddr addr)
 
         while (cache_entry < LQSPI_CACHE_SIZE) {
             for (i = 0; i < 64; ++i) {
-                tx_data_bytes(s, 0, 1);
+                tx_data_bytes(&s->tx_fifo, 0, 1, false);
             }
             xilinx_spips_flush_txfifo(s);
             for (i = 0; i < 64; ++i) {
-                rx_data_bytes(s, &q->lqspi_buf[cache_entry++], 1);
+                rx_data_bytes(&s->rx_fifo, &q->lqspi_buf[cache_entry++], 1);
             }
         }
 
-- 
2.9.3

  parent reply	other threads:[~2017-11-01  7:17 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-01  7:16 [Qemu-devel] [PATCH v6 00/13] Add support for the ZynqMP Generic QSPI Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 01/13] m25p80: Add support for continuous read out of RDSR and READ_FSR Francisco Iglesias
2017-11-01 19:20   ` mar.krzeminski
2017-11-01 20:42     ` francisco iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 02/13] m25p80: Add support for SST READ ID 0x90/0xAB commands Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 03/13] m25p80: Add support for BRRD/BRWR and BULK_ERASE (0x60) Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 04/13] m25p80: Add support for n25q512a11 and n25q512a13 Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 05/13] xilinx_spips: Move FlashCMD, XilinxQSPIPS and XilinxSPIPSClass Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 06/13] xilinx_spips: Update striping to be big-endian bit order Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 07/13] xilinx_spips: Add support for RX discard and RX drain Francisco Iglesias
2017-11-01  7:16 ` Francisco Iglesias [this message]
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 09/13] xilinx_spips: Add support for zero pumping Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 10/13] xilinx_spips: Add support for 4 byte addresses in the LQSPI Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 11/13] xilinx_spips: Don't set TX FIFO UNDERFLOW at cmd done Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 12/13] xilinx_spips: Add support for the ZynqMP Generic QSPI Francisco Iglesias
2017-11-01  7:16 ` [Qemu-devel] [PATCH v6 13/13] xlnx-zcu102: Add support for the ZynqMP QSPI Francisco Iglesias

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171101071652.19375-9-frasse.iglesias@gmail.com \
    --to=frasse.iglesias@gmail.com \
    --cc=alistai@xilinx.com \
    --cc=edgari@xilinx.com \
    --cc=francisco.iglesias@feimtech.se \
    --cc=mar.krzeminski@gmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.