[PATCH v5 0/7] drm/fbdev: Panel orientation connector property support

[PATCH v5 0/7] drm/fbdev: Panel orientation connector property support

[Hans de Goede]

Hi All,

Here is v5 of my series to add a "panel orientation" property to
the drm-connector for the LCD panel to let userspace know about LCD
panels which are not mounted upright, as well as detecting upside-down
panels without needing quirks (like we do for 90 degree rotated screens).

New in v5:
-Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
-drm_fb_helper: Only use hardware (crtc primary plane) rotation for
 180 degrees for now as 9-/270 degrees rotation requires special handling

New in v4:
-Fix drm_fb_helper code setting an invalid rotation value on the primary
 plane of disabled/unused crtcs (caught by Fi.CI)

New in v3:
-As requested by Daniel v3 moves the quirks over from the fbdev
 subsys to the drm subsys. I've done this by simpy starting with a copy of
 the quirk table and eventually removing the fbdev version.

The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
discussed previously the plan is to merge all 7 patches through the
drm tree.

Regards,

Hans

[PATCH v5 0/7] drm/fbdev: Panel orientation connector property support

[Hans de Goede]

Hi All,

Here is v5 of my series to add a "panel orientation" property to
the drm-connector for the LCD panel to let userspace know about LCD
panels which are not mounted upright, as well as detecting upside-down
panels without needing quirks (like we do for 90 degree rotated screens).

New in v5:
-Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
-drm_fb_helper: Only use hardware (crtc primary plane) rotation for
 180 degrees for now as 9-/270 degrees rotation requires special handling

New in v4:
-Fix drm_fb_helper code setting an invalid rotation value on the primary
 plane of disabled/unused crtcs (caught by Fi.CI)

New in v3:
-As requested by Daniel v3 moves the quirks over from the fbdev
 subsys to the drm subsys. I've done this by simpy starting with a copy of
 the quirk table and eventually removing the fbdev version.

The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
discussed previously the plan is to merge all 7 patches through the
drm tree.

Regards,

Hans
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v5 1/7] fbcon: Add fbcon_rotate_hint to struct fb_info

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but upside-down or rotated 90 degrees. In this case we want the console
to automatically be rotated to compensate.

The fbdev-driver may know about the need to rotate. Add a new
fbcon_rotate_hint field to struct fb_info, which gets initialized to -1.
If the fbdev-driver knows that some sort of rotation is necessary then
it can set this field to a FB_ROTATE_* value to tell the fbcon console
driver to rotate the console.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/fbcon.c   | 18 ++++++++++++------
 drivers/video/fbdev/core/fbsysfs.c |  1 +
 include/linux/fb.h                 |  5 +++++
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 04612f938bab..fb317ed76b45 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -963,10 +963,13 @@ static const char *fbcon_startup(void)
 	ops->cur_rotate = -1;
 	ops->cur_blink_jiffies = HZ / 5;
 	info->fbcon_par = ops;
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate = -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate = -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	if (info->fix.type != FB_TYPE_TEXT) {
@@ -1103,10 +1106,13 @@ static void fbcon_init(struct vc_data *vc, int init)
 
 	ops = info->fbcon_par;
 	ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate = -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate = -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	cols = vc->vc_cols;
diff --git a/drivers/video/fbdev/core/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 15755ce1d26c..e31a182b42bf 100644
--- a/drivers/video/fbdev/core/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
@@ -58,6 +58,7 @@ struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
 		info->par = p + fb_info_size;
 
 	info->device = dev;
+	info->fbcon_rotate_hint = -1;
 
 #ifdef CONFIG_FB_BACKLIGHT
 	mutex_init(&info->bl_curve_mutex);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f4386b0ccf40..10cf71cc5d13 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -464,6 +464,11 @@ struct fb_info {
 	atomic_t count;
 	int node;
 	int flags;
+	/*
+	 * -1 by default, set to a FB_ROTATE_* value by the driver, if it knows
+	 * a lcd is not mounted upright and fbcon should rotate to compensate.
+	 */
+	int fbcon_rotate_hint;
 	struct mutex lock;		/* Lock for open/release/ioctl funcs */
 	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
 	struct fb_var_screeninfo var;	/* Current var */
-- 
2.14.3

[PATCH v5 1/7] fbcon: Add fbcon_rotate_hint to struct fb_info

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but upside-down or rotated 90 degrees. In this case we want the console
to automatically be rotated to compensate.

The fbdev-driver may know about the need to rotate. Add a new
fbcon_rotate_hint field to struct fb_info, which gets initialized to -1.
If the fbdev-driver knows that some sort of rotation is necessary then
it can set this field to a FB_ROTATE_* value to tell the fbcon console
driver to rotate the console.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/fbcon.c   | 18 ++++++++++++------
 drivers/video/fbdev/core/fbsysfs.c |  1 +
 include/linux/fb.h                 |  5 +++++
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 04612f938bab..fb317ed76b45 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -963,10 +963,13 @@ static const char *fbcon_startup(void)
 	ops->cur_rotate = -1;
 	ops->cur_blink_jiffies = HZ / 5;
 	info->fbcon_par = ops;
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate == -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate == -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	if (info->fix.type != FB_TYPE_TEXT) {
@@ -1103,10 +1106,13 @@ static void fbcon_init(struct vc_data *vc, int init)
 
 	ops = info->fbcon_par;
 	ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
-	if (initial_rotation != -1)
-		p->con_rotate = initial_rotation;
-	else
+
+	p->con_rotate = initial_rotation;
+	if (p->con_rotate == -1)
+		p->con_rotate = info->fbcon_rotate_hint;
+	if (p->con_rotate == -1)
 		p->con_rotate = fbcon_platform_get_rotate(info);
+
 	set_blitting_type(vc, info);
 
 	cols = vc->vc_cols;
diff --git a/drivers/video/fbdev/core/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 15755ce1d26c..e31a182b42bf 100644
--- a/drivers/video/fbdev/core/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
@@ -58,6 +58,7 @@ struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
 		info->par = p + fb_info_size;
 
 	info->device = dev;
+	info->fbcon_rotate_hint = -1;
 
 #ifdef CONFIG_FB_BACKLIGHT
 	mutex_init(&info->bl_curve_mutex);
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f4386b0ccf40..10cf71cc5d13 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -464,6 +464,11 @@ struct fb_info {
 	atomic_t count;
 	int node;
 	int flags;
+	/*
+	 * -1 by default, set to a FB_ROTATE_* value by the driver, if it knows
+	 * a lcd is not mounted upright and fbcon should rotate to compensate.
+	 */
+	int fbcon_rotate_hint;
 	struct mutex lock;		/* Lock for open/release/ioctl funcs */
 	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
 	struct fb_var_screeninfo var;	/* Current var */
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v5 2/7] drm: Add panel orientation quirks

[Hans de Goede]

Some x86 clamshell design devices use portrait tablet screens and a display
engine which cannot rotate in hardware, so the firmware just leaves things
as is and we cannot figure out that the display is oriented non upright
from the hardware.

So at least on x86, we need a quirk table for this. This commit adds a DMI
based quirk table which is initially populated with 5 such devices: Asus
T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.

This quirk table will be used by the drm code to let userspace know that
the display is not mounted upright inside the devices case through a new
panel orientation drm-connector property, as well as to tell fbcon to
rotate the console so that it shows the right way up.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v5:
-Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()
-Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
 keeping only the (identical) sys_vendor and product_name matches.
 This is necessary because an older version of the bios has
 board_vendor set to VOIS instead of VIOS
---
 drivers/gpu/drm/Kconfig                        |   3 +
 drivers/gpu/drm/Makefile                       |   1 +
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 174 +++++++++++++++++++++++++
 include/drm/drm_utils.h                        |  18 +++
 4 files changed, 196 insertions(+)
 create mode 100644 drivers/gpu/drm/drm_panel_orientation_quirks.c
 create mode 100644 include/drm/drm_utils.h

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4d9f21831741..9d005ac98c2b 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -26,6 +26,9 @@ config DRM_MIPI_DSI
 	bool
 	depends on DRM
 
+config DRM_PANEL_ORIENTATION_QUIRKS
+	tristate
+
 config DRM_DP_AUX_CHARDEV
 	bool "DRM DP AUX Interface"
 	depends on DRM
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index a3fdc5a68dff..ffb621819bbf 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
 
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
+obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
 obj-$(CONFIG_DRM_ARM)	+= arm/
 obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
new file mode 100644
index 000000000000..b8765e2ed1d6
--- /dev/null
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -0,0 +1,174 @@
+/*
+ *  drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
+ *
+ *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#include <linux/dmi.h>
+#include <drm/drm_connector.h>
+
+#ifdef CONFIG_DMI
+
+/*
+ * Some x86 clamshell design devices use portrait tablet screens and a display
+ * engine which cannot rotate in hardware, so we need to rotate the fbcon to
+ * compensate. Unfortunately these (cheap) devices also typically have quite
+ * generic DMI data, so we match on a combination of DMI data, screen resolution
+ * and a list of known BIOS dates to avoid false positives.
+ */
+
+struct drm_dmi_panel_orientation_data {
+	int width;
+	int height;
+	const char * const *bios_dates;
+	int orientation;
+};
+
+static const struct drm_dmi_panel_orientation_data asus_t100ha = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_pocket = {
+	.width = 1200,
+	.height = 1920,
+	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
+		"07/05/2017", "08/07/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_win = {
+	.width = 720,
+	.height = 1280,
+	.bios_dates = (const char * const []){
+		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
+		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
+	.width = 800,
+	.height = 1280,
+	.bios_dates = (const char * const []){ "10/16/2015", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data vios_lth17 = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct dmi_system_id orientation_data[] = {
+	{	/* Asus T100HA */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
+		},
+		.driver_data = (void *)&asus_t100ha,
+	}, {	/*
+		 * GPD Pocket, note that the the DMI data is less generic then
+		 * it seems, devices with a board-vendor of "AMI Corporation"
+		 * are quite rare, as are devices which have both board- *and*
+		 * product-id set to "Default String"
+		 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_pocket,
+	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_win,
+	}, {	/* I.T.Works TW891 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
+		},
+		.driver_data = (void *)&itworks_tw891,
+	}, {	/* VIOS LTH17 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
+		},
+		.driver_data = (void *)&vios_lth17,
+	},
+	{}
+};
+
+/**
+ * drm_get_panel_orientation_quirk - Check for panel orientation quirks
+ * @width: width in pixels of the panel
+ * @height: height in pixels of the panel
+ *
+ * This function checks for platform specific (e.g. DMI based) quirks
+ * providing info on panel_orientation for systems where this cannot be
+ * probed from the hard-/firm-ware. To avoid false-positive this function
+ * takes the panel resolution as argument and checks that against the
+ * resolution expected by the quirk-table entry.
+ *
+ * Note this function is also used outside of the drm-subsys, by for example
+ * the efifb code. Because of this this function gets compiled into its own
+ * kernel-module when built as a module.
+ *
+ * Returns:
+ * A DRM_MODE_PANEL_ORIENTATION_* value if there is a quirk for this system,
+ * or DRM_MODE_PANEL_ORIENTATION_UNKNOWN if there is no quirk.
+ */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	const struct dmi_system_id *match;
+	const struct drm_dmi_panel_orientation_data *data;
+	const char *bios_date;
+	int i;
+
+	for (match = dmi_first_match(orientation_data);
+	     match;
+	     match = dmi_first_match(match + 1)) {
+		data = match->driver_data;
+
+		if (data->width != width ||
+		    data->height != height)
+			continue;
+
+		if (!data->bios_dates)
+			return data->orientation;
+
+		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
+		if (!bios_date)
+			continue;
+
+		for (i = 0; data->bios_dates[i]; i++) {
+			if (!strcmp(data->bios_dates[i], bios_date))
+				return data->orientation;
+		}
+	}
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#else
+
+/* There are no quirks for non x86 devices yet */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#endif
diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
new file mode 100644
index 000000000000..cea362aeaffe
--- /dev/null
+++ b/include/drm/drm_utils.h
@@ -0,0 +1,18 @@
+/*
+ * Function prototypes for misc. drm utility functions.
+ * Specifically this file is for function prototypes for functions which
+ * may also be used outside of drm code (e.g. in fbdev drivers).
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRM_UTILS_H__
+#define __DRM_UTILS_H__
+
+int drm_get_panel_orientation_quirk(int width, int height);
+
+#endif
-- 
2.14.3

[PATCH v5 2/7] drm: Add panel orientation quirks

[Hans de Goede]

Some x86 clamshell design devices use portrait tablet screens and a display
engine which cannot rotate in hardware, so the firmware just leaves things
as is and we cannot figure out that the display is oriented non upright
from the hardware.

So at least on x86, we need a quirk table for this. This commit adds a DMI
based quirk table which is initially populated with 5 such devices: Asus
T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.

This quirk table will be used by the drm code to let userspace know that
the display is not mounted upright inside the devices case through a new
panel orientation drm-connector property, as well as to tell fbcon to
rotate the console so that it shows the right way up.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v5:
-Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()
-Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
 keeping only the (identical) sys_vendor and product_name matches.
 This is necessary because an older version of the bios has
 board_vendor set to VOIS instead of VIOS
---
 drivers/gpu/drm/Kconfig                        |   3 +
 drivers/gpu/drm/Makefile                       |   1 +
 drivers/gpu/drm/drm_panel_orientation_quirks.c | 174 +++++++++++++++++++++++++
 include/drm/drm_utils.h                        |  18 +++
 4 files changed, 196 insertions(+)
 create mode 100644 drivers/gpu/drm/drm_panel_orientation_quirks.c
 create mode 100644 include/drm/drm_utils.h

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 4d9f21831741..9d005ac98c2b 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -26,6 +26,9 @@ config DRM_MIPI_DSI
 	bool
 	depends on DRM
 
+config DRM_PANEL_ORIENTATION_QUIRKS
+	tristate
+
 config DRM_DP_AUX_CHARDEV
 	bool "DRM DP AUX Interface"
 	depends on DRM
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index a3fdc5a68dff..ffb621819bbf 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
 
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
+obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
 obj-$(CONFIG_DRM_ARM)	+= arm/
 obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
new file mode 100644
index 000000000000..b8765e2ed1d6
--- /dev/null
+++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
@@ -0,0 +1,174 @@
+/*
+ *  drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
+ *
+ *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#include <linux/dmi.h>
+#include <drm/drm_connector.h>
+
+#ifdef CONFIG_DMI
+
+/*
+ * Some x86 clamshell design devices use portrait tablet screens and a display
+ * engine which cannot rotate in hardware, so we need to rotate the fbcon to
+ * compensate. Unfortunately these (cheap) devices also typically have quite
+ * generic DMI data, so we match on a combination of DMI data, screen resolution
+ * and a list of known BIOS dates to avoid false positives.
+ */
+
+struct drm_dmi_panel_orientation_data {
+	int width;
+	int height;
+	const char * const *bios_dates;
+	int orientation;
+};
+
+static const struct drm_dmi_panel_orientation_data asus_t100ha = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_pocket = {
+	.width = 1200,
+	.height = 1920,
+	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
+		"07/05/2017", "08/07/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data gpd_win = {
+	.width = 720,
+	.height = 1280,
+	.bios_dates = (const char * const []){
+		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
+		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
+	.width = 800,
+	.height = 1280,
+	.bios_dates = (const char * const []){ "10/16/2015", NULL },
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct drm_dmi_panel_orientation_data vios_lth17 = {
+	.width = 800,
+	.height = 1280,
+	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
+};
+
+static const struct dmi_system_id orientation_data[] = {
+	{	/* Asus T100HA */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
+		},
+		.driver_data = (void *)&asus_t100ha,
+	}, {	/*
+		 * GPD Pocket, note that the the DMI data is less generic then
+		 * it seems, devices with a board-vendor of "AMI Corporation"
+		 * are quite rare, as are devices which have both board- *and*
+		 * product-id set to "Default String"
+		 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_pocket,
+	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+		},
+		.driver_data = (void *)&gpd_win,
+	}, {	/* I.T.Works TW891 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
+		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
+		},
+		.driver_data = (void *)&itworks_tw891,
+	}, {	/* VIOS LTH17 */
+		.matches = {
+		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
+		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
+		},
+		.driver_data = (void *)&vios_lth17,
+	},
+	{}
+};
+
+/**
+ * drm_get_panel_orientation_quirk - Check for panel orientation quirks
+ * @width: width in pixels of the panel
+ * @height: height in pixels of the panel
+ *
+ * This function checks for platform specific (e.g. DMI based) quirks
+ * providing info on panel_orientation for systems where this cannot be
+ * probed from the hard-/firm-ware. To avoid false-positive this function
+ * takes the panel resolution as argument and checks that against the
+ * resolution expected by the quirk-table entry.
+ *
+ * Note this function is also used outside of the drm-subsys, by for example
+ * the efifb code. Because of this this function gets compiled into its own
+ * kernel-module when built as a module.
+ *
+ * Returns:
+ * A DRM_MODE_PANEL_ORIENTATION_* value if there is a quirk for this system,
+ * or DRM_MODE_PANEL_ORIENTATION_UNKNOWN if there is no quirk.
+ */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	const struct dmi_system_id *match;
+	const struct drm_dmi_panel_orientation_data *data;
+	const char *bios_date;
+	int i;
+
+	for (match = dmi_first_match(orientation_data);
+	     match;
+	     match = dmi_first_match(match + 1)) {
+		data = match->driver_data;
+
+		if (data->width != width ||
+		    data->height != height)
+			continue;
+
+		if (!data->bios_dates)
+			return data->orientation;
+
+		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
+		if (!bios_date)
+			continue;
+
+		for (i = 0; data->bios_dates[i]; i++) {
+			if (!strcmp(data->bios_dates[i], bios_date))
+				return data->orientation;
+		}
+	}
+
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#else
+
+/* There are no quirks for non x86 devices yet */
+int drm_get_panel_orientation_quirk(int width, int height)
+{
+	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+}
+EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
+
+#endif
diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
new file mode 100644
index 000000000000..cea362aeaffe
--- /dev/null
+++ b/include/drm/drm_utils.h
@@ -0,0 +1,18 @@
+/*
+ * Function prototypes for misc. drm utility functions.
+ * Specifically this file is for function prototypes for functions which
+ * may also be used outside of drm code (e.g. in fbdev drivers).
+ *
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRM_UTILS_H__
+#define __DRM_UTILS_H__
+
+int drm_get_panel_orientation_quirk(int width, int height);
+
+#endif
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v5 3/7] drm: Add support for a panel-orientation connector property

[Hans de Goede]

On some devices the LCD panel is mounted in the casing in such a way that
the up/top side of the panel does not match with the top side of the
device (e.g. it is mounted upside-down).

This commit adds the necessary infra for lcd-panel drm_connector-s to
have a "panel orientation" property to communicate how the panel is
orientated vs the casing.

Userspace can use this property to check for non-normal orientation and
then adjust the displayed image accordingly by rotating it to compensate.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Rebased on 4.14-rc1
-Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
 access it easily
-Have a single drm_connector_init_panel_orientation_property rather then
 create and attach functions. The caller is expected to set
 drm_display_info.panel_orientation before calling this, then this will
 check for platform specific quirks overriding the panel_orientation and if
 the panel_orientation is set after this then it will attach the property.
---
 drivers/gpu/drm/Kconfig         |  1 +
 drivers/gpu/drm/drm_connector.c | 73 +++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h     | 11 +++++++
 include/drm/drm_mode_config.h   |  7 ++++
 include/uapi/drm/drm_mode.h     |  7 ++++
 5 files changed, 99 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 9d005ac98c2b..0b166e626eb6 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -7,6 +7,7 @@
 menuconfig DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
 	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select HDMI
 	select FB_CMDLINE
 	select I2C
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 704fc8934616..129c83a84320 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -24,6 +24,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
 
 #include "drm_crtc_internal.h"
 #include "drm_internal.h"
@@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
 	mutex_init(&connector->mutex);
 	connector->edid_blob_ptr = NULL;
 	connector->status = connector_status_unknown;
+	connector->display_info.panel_orientation +		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 
 	drm_connector_get_cmdline_mode(connector);
 
@@ -664,6 +667,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
 	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
 };
 
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
+	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
+	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
+	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
+};
+
 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
@@ -768,6 +778,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
  *
  * CRTC_ID:
  * 	Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ *	On some devices the LCD panel is mounted in the casing in such a way
+ *	that the up/top side of the panel does not match with the top side of
+ *	the device. Userspace can use this property to check for this.
+ *	Note that input coordinates from touchscreens (input devices with
+ *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ *	coordinates, so if userspace rotates the picture to adjust for
+ *	the orientation it must also apply the same transformation to the
+ *	touchscreen input coordinates.
  */
 
 int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1234,6 +1256,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
 }
 EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ *	initialize the connecters panel_orientation property
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function should only be called for built-in panels, after setting
+ * connector->display_info.panel_orientation first (if known).
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_info *info = &connector->display_info;
+	struct drm_property *prop;
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		info->panel_orientation = orientation_quirk;
+
+	if (info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
+
+	prop = dev->mode_config.panel_orientation_property;
+	if (!prop) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				"panel orientation",
+				drm_panel_orientation_enum_list,
+				ARRAY_SIZE(drm_panel_orientation_enum_list));
+		if (!prop)
+			return -ENOMEM;
+
+		dev->mode_config.panel_orientation_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop,
+				   info->panel_orientation);
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index b4285c40e1e4..e6883065a461 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -222,6 +222,15 @@ struct drm_display_info {
 #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
 #define DRM_COLOR_FORMAT_YCRCB420	(1<<3)
 
+	/**
+	 * @panel_orientation: Read only connector property for built-in panels,
+	 * indicating the orientation of the panel vs the device's casing.
+	 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+	 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
+	 * fb to compensate and gets exported as prop to userspace.
+	 */
+	int panel_orientation;
+
 	/**
 	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
 	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
@@ -1019,6 +1028,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 					    const struct edid *edid);
 void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
 						 uint64_t link_status);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height);
 
 /**
  * struct drm_tile_group - Tile group metadata
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 0b4ac2ebc610..7d4ee1726e0a 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -728,6 +728,13 @@ struct drm_mode_config {
 	 */
 	struct drm_property *suggested_y_property;
 
+	/**
+	 * @panel_orientation_property: Optional connector property indicating
+	 * how the lcd-panel is mounted inside the casing (e.g. normal or
+	 * upside-down).
+	 */
+	struct drm_property *panel_orientation_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 34b6bb34b002..f60fae67bc1f 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -127,6 +127,13 @@ extern "C" {
 #define DRM_MODE_LINK_STATUS_GOOD	0
 #define DRM_MODE_LINK_STATUS_BAD	1
 
+/* Panel Orientation options */
+#define DRM_MODE_PANEL_ORIENTATION_UNKNOWN	-1
+#define DRM_MODE_PANEL_ORIENTATION_NORMAL	0
+#define DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP	1
+#define DRM_MODE_PANEL_ORIENTATION_LEFT_UP	2
+#define DRM_MODE_PANEL_ORIENTATION_RIGHT_UP	3
+
 /*
  * DRM_MODE_ROTATE_<degrees>
  *
-- 
2.14.3

[PATCH v5 3/7] drm: Add support for a panel-orientation connector property

[Hans de Goede]

On some devices the LCD panel is mounted in the casing in such a way that
the up/top side of the panel does not match with the top side of the
device (e.g. it is mounted upside-down).

This commit adds the necessary infra for lcd-panel drm_connector-s to
have a "panel orientation" property to communicate how the panel is
orientated vs the casing.

Userspace can use this property to check for non-normal orientation and
then adjust the displayed image accordingly by rotating it to compensate.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Rebased on 4.14-rc1
-Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
 access it easily
-Have a single drm_connector_init_panel_orientation_property rather then
 create and attach functions. The caller is expected to set
 drm_display_info.panel_orientation before calling this, then this will
 check for platform specific quirks overriding the panel_orientation and if
 the panel_orientation is set after this then it will attach the property.
---
 drivers/gpu/drm/Kconfig         |  1 +
 drivers/gpu/drm/drm_connector.c | 73 +++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h     | 11 +++++++
 include/drm/drm_mode_config.h   |  7 ++++
 include/uapi/drm/drm_mode.h     |  7 ++++
 5 files changed, 99 insertions(+)

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 9d005ac98c2b..0b166e626eb6 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -7,6 +7,7 @@
 menuconfig DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
 	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select HDMI
 	select FB_CMDLINE
 	select I2C
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 704fc8934616..129c83a84320 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -24,6 +24,7 @@
 #include <drm/drm_connector.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
 
 #include "drm_crtc_internal.h"
 #include "drm_internal.h"
@@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
 	mutex_init(&connector->mutex);
 	connector->edid_blob_ptr = NULL;
 	connector->status = connector_status_unknown;
+	connector->display_info.panel_orientation =
+		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
 
 	drm_connector_get_cmdline_mode(connector);
 
@@ -664,6 +667,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
 	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
 };
 
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
+	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
+	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
+	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
+};
+
 static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
 	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
 	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
@@ -768,6 +778,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
  *
  * CRTC_ID:
  * 	Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ *	On some devices the LCD panel is mounted in the casing in such a way
+ *	that the up/top side of the panel does not match with the top side of
+ *	the device. Userspace can use this property to check for this.
+ *	Note that input coordinates from touchscreens (input devices with
+ *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ *	coordinates, so if userspace rotates the picture to adjust for
+ *	the orientation it must also apply the same transformation to the
+ *	touchscreen input coordinates.
  */
 
 int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1234,6 +1256,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
 }
 EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
 
+/**
+ * drm_connector_init_panel_orientation_property -
+ *	initialize the connecters panel_orientation property
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function should only be called for built-in panels, after setting
+ * connector->display_info.panel_orientation first (if known).
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_info *info = &connector->display_info;
+	struct drm_property *prop;
+	int orientation_quirk;
+
+	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		info->panel_orientation = orientation_quirk;
+
+	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+		return 0;
+
+	prop = dev->mode_config.panel_orientation_property;
+	if (!prop) {
+		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+				"panel orientation",
+				drm_panel_orientation_enum_list,
+				ARRAY_SIZE(drm_panel_orientation_enum_list));
+		if (!prop)
+			return -ENOMEM;
+
+		dev->mode_config.panel_orientation_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop,
+				   info->panel_orientation);
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
 int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
 				    struct drm_property *property,
 				    uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index b4285c40e1e4..e6883065a461 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -222,6 +222,15 @@ struct drm_display_info {
 #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
 #define DRM_COLOR_FORMAT_YCRCB420	(1<<3)
 
+	/**
+	 * @panel_orientation: Read only connector property for built-in panels,
+	 * indicating the orientation of the panel vs the device's casing.
+	 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+	 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
+	 * fb to compensate and gets exported as prop to userspace.
+	 */
+	int panel_orientation;
+
 	/**
 	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
 	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
@@ -1019,6 +1028,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
 					    const struct edid *edid);
 void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
 						 uint64_t link_status);
+int drm_connector_init_panel_orientation_property(
+	struct drm_connector *connector, int width, int height);
 
 /**
  * struct drm_tile_group - Tile group metadata
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 0b4ac2ebc610..7d4ee1726e0a 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -728,6 +728,13 @@ struct drm_mode_config {
 	 */
 	struct drm_property *suggested_y_property;
 
+	/**
+	 * @panel_orientation_property: Optional connector property indicating
+	 * how the lcd-panel is mounted inside the casing (e.g. normal or
+	 * upside-down).
+	 */
+	struct drm_property *panel_orientation_property;
+
 	/* dumb ioctl parameters */
 	uint32_t preferred_depth, prefer_shadow;
 
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 34b6bb34b002..f60fae67bc1f 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -127,6 +127,13 @@ extern "C" {
 #define DRM_MODE_LINK_STATUS_GOOD	0
 #define DRM_MODE_LINK_STATUS_BAD	1
 
+/* Panel Orientation options */
+#define DRM_MODE_PANEL_ORIENTATION_UNKNOWN	-1
+#define DRM_MODE_PANEL_ORIENTATION_NORMAL	0
+#define DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP	1
+#define DRM_MODE_PANEL_ORIENTATION_LEFT_UP	2
+#define DRM_MODE_PANEL_ORIENTATION_RIGHT_UP	3
+
 /*
  * DRM_MODE_ROTATE_<degrees>
  *
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v5 4/7] drm/fb-helper: Apply panel orientation connector prop to the primary plane

[Hans de Goede]

Apply the "panel orientation" drm connector prop to the primary plane so
that fbcon and fbdev using userspace programs display the right way up.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id”894
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-New patch in v2 of this patch-set

Changes in v3:
-Use a rotation member in struct drm_fb_helper_crtc and set that from
 drm_setup_crtcs instead of looping over all crtc's to find the right one
 later
-Since we now no longer look at rotation quirks directly in the fbcon
 code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright
 and we cannot use hardware rotation

Changes in v4:
-Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to
 DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the
 plane_state's rotation to an invalid value for disabled crtcs
 (caught by Fi.CI)

Changes in v5:
-Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180,
 90 / 270 degree rotation requires special handling which we lack atm
-Add a TODO comment for 90 / 270 degree hardware rotation
-Add some comments to better document the default case when mapping
 sw_rotations to fbcon_rotate_hints
---
 drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++-
 include/drm/drm_fb_helper.h     |  8 ++++
 2 files changed, 96 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 116d1f1337c7..5a557488bff4 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -41,6 +41,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 
+#include "drm_crtc_internal.h"
 #include "drm_crtc_helper_internal.h"
 
 static bool drm_fbdev_emulation = true;
@@ -350,6 +351,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave);
 static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
 {
 	struct drm_device *dev = fb_helper->dev;
+	struct drm_plane_state *plane_state;
 	struct drm_plane *plane;
 	struct drm_atomic_state *state;
 	int i, ret;
@@ -368,8 +370,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 retry:
 	plane_mask = 0;
 	drm_for_each_plane(plane, dev) {
-		struct drm_plane_state *plane_state;
-
 		plane_state = drm_atomic_get_plane_state(state, plane);
 		if (IS_ERR(plane_state)) {
 			ret = PTR_ERR(plane_state);
@@ -392,6 +392,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
+		struct drm_plane *primary = mode_set->crtc->primary;
+
+		/* Cannot fail as we've already gotten the plane state above */
+		plane_state = drm_atomic_get_new_plane_state(state, primary);
+		plane_state->rotation = fb_helper->crtc_info[i].rotation;
 
 		ret = __drm_atomic_helper_set_config(mode_set, state);
 		if (ret != 0)
@@ -821,6 +826,7 @@ int drm_fb_helper_init(struct drm_device *dev,
 		if (!fb_helper->crtc_info[i].mode_set.connectors)
 			goto out_free;
 		fb_helper->crtc_info[i].mode_set.num_connectors = 0;
+		fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
 	}
 
 	i = 0;
@@ -2334,6 +2340,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 	return best_score;
 }
 
+/*
+ * This function checks if rotation is necessary because of panel orientation
+ * and if it is, if it is supported.
+ * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
+ * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
+ * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
+ * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
+ * the unsupported rotation.
+ */
+static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
+				    struct drm_fb_helper_crtc *fb_crtc,
+				    struct drm_connector *connector)
+{
+	struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
+	uint64_t valid_mask = 0;
+	int i, rotation;
+
+	fb_crtc->rotation = DRM_MODE_ROTATE_0;
+
+	switch (connector->display_info.panel_orientation) {
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		rotation = DRM_MODE_ROTATE_180;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		rotation = DRM_MODE_ROTATE_90;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		rotation = DRM_MODE_ROTATE_270;
+		break;
+	default:
+		rotation = DRM_MODE_ROTATE_0;
+	}
+
+	/*
+	 * TODO: support 90 / 270 degree hardware rotation,
+	 * depending on the hardware this may require the framebuffer
+	 * to be in a specific tiling format.
+	 */
+	if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	for (i = 0; i < plane->rotation_property->num_values; i++)
+		valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+	if (!(rotation & valid_mask)) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	fb_crtc->rotation = rotation;
+	/* Rotating in hardware, fbcon should not rotate */
+	fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
+}
+
 static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			    u32 width, u32 height)
 {
@@ -2393,6 +2455,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 		drm_fb_helper_modeset_release(fb_helper,
 					      &fb_helper->crtc_info[i].mode_set);
 
+	fb_helper->sw_rotations = 0;
 	drm_fb_helper_for_each_connector(fb_helper, i) {
 		struct drm_display_mode *mode = modes[i];
 		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
@@ -2412,6 +2475,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			modeset->mode = drm_mode_duplicate(dev,
 							   fb_crtc->desired_mode);
 			drm_connector_get(connector);
+			drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
 			modeset->connectors[modeset->num_connectors++] = connector;
 			modeset->x = offset->x;
 			modeset->y = offset->y;
@@ -2453,6 +2517,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
 		}
 	}
 	mutex_unlock(&fb_helper->dev->mode_config.mutex);
+
+	switch (fb_helper->sw_rotations) {
+	case DRM_MODE_ROTATE_0:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_ROTATE_90:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_ROTATE_180:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_ROTATE_270:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	default:
+		/*
+		 * Multiple bits are set / multiple rotations requested
+		 * fbcon cannot handle separate rotation settings per
+		 * output, so fallback to unrotated.
+		 */
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+	}
 }
 
 /* Note: Drops fb_helper->lock before returning. */
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 33fe95927742..7fca941c2c57 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -48,6 +48,7 @@ struct drm_fb_helper_crtc {
 	struct drm_mode_set mode_set;
 	struct drm_display_mode *desired_mode;
 	int x, y;
+	int rotation;
 };
 
 /**
@@ -158,6 +159,13 @@ struct drm_fb_helper {
 	struct drm_fb_helper_crtc *crtc_info;
 	int connector_count;
 	int connector_info_alloc_count;
+	/**
+	 * @rotations:
+	 * Bitmask of all rotations requested for panel-orientation which
+	 * could not be handled in hardware. If only one bit is set
+	 * fbdev->fbcon_rotate_hint gets set to the requested rotation.
+	 */
+	int sw_rotations;
 	/**
 	 * @connector_info:
 	 *
-- 
2.14.3

[PATCH v5 4/7] drm/fb-helper: Apply panel orientation connector prop to the primary plane

[Hans de Goede]

Apply the "panel orientation" drm connector prop to the primary plane so
that fbcon and fbdev using userspace programs display the right way up.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-New patch in v2 of this patch-set

Changes in v3:
-Use a rotation member in struct drm_fb_helper_crtc and set that from
 drm_setup_crtcs instead of looping over all crtc's to find the right one
 later
-Since we now no longer look at rotation quirks directly in the fbcon
 code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright
 and we cannot use hardware rotation

Changes in v4:
-Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to
 DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the
 plane_state's rotation to an invalid value for disabled crtcs
 (caught by Fi.CI)

Changes in v5:
-Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180,
 90 / 270 degree rotation requires special handling which we lack atm
-Add a TODO comment for 90 / 270 degree hardware rotation
-Add some comments to better document the default case when mapping
 sw_rotations to fbcon_rotate_hints
---
 drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++-
 include/drm/drm_fb_helper.h     |  8 ++++
 2 files changed, 96 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 116d1f1337c7..5a557488bff4 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -41,6 +41,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 
+#include "drm_crtc_internal.h"
 #include "drm_crtc_helper_internal.h"
 
 static bool drm_fbdev_emulation = true;
@@ -350,6 +351,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave);
 static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
 {
 	struct drm_device *dev = fb_helper->dev;
+	struct drm_plane_state *plane_state;
 	struct drm_plane *plane;
 	struct drm_atomic_state *state;
 	int i, ret;
@@ -368,8 +370,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 retry:
 	plane_mask = 0;
 	drm_for_each_plane(plane, dev) {
-		struct drm_plane_state *plane_state;
-
 		plane_state = drm_atomic_get_plane_state(state, plane);
 		if (IS_ERR(plane_state)) {
 			ret = PTR_ERR(plane_state);
@@ -392,6 +392,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
 
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
+		struct drm_plane *primary = mode_set->crtc->primary;
+
+		/* Cannot fail as we've already gotten the plane state above */
+		plane_state = drm_atomic_get_new_plane_state(state, primary);
+		plane_state->rotation = fb_helper->crtc_info[i].rotation;
 
 		ret = __drm_atomic_helper_set_config(mode_set, state);
 		if (ret != 0)
@@ -821,6 +826,7 @@ int drm_fb_helper_init(struct drm_device *dev,
 		if (!fb_helper->crtc_info[i].mode_set.connectors)
 			goto out_free;
 		fb_helper->crtc_info[i].mode_set.num_connectors = 0;
+		fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
 	}
 
 	i = 0;
@@ -2334,6 +2340,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 	return best_score;
 }
 
+/*
+ * This function checks if rotation is necessary because of panel orientation
+ * and if it is, if it is supported.
+ * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
+ * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
+ * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
+ * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
+ * the unsupported rotation.
+ */
+static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
+				    struct drm_fb_helper_crtc *fb_crtc,
+				    struct drm_connector *connector)
+{
+	struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
+	uint64_t valid_mask = 0;
+	int i, rotation;
+
+	fb_crtc->rotation = DRM_MODE_ROTATE_0;
+
+	switch (connector->display_info.panel_orientation) {
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		rotation = DRM_MODE_ROTATE_180;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		rotation = DRM_MODE_ROTATE_90;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		rotation = DRM_MODE_ROTATE_270;
+		break;
+	default:
+		rotation = DRM_MODE_ROTATE_0;
+	}
+
+	/*
+	 * TODO: support 90 / 270 degree hardware rotation,
+	 * depending on the hardware this may require the framebuffer
+	 * to be in a specific tiling format.
+	 */
+	if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	for (i = 0; i < plane->rotation_property->num_values; i++)
+		valid_mask |= (1ULL << plane->rotation_property->values[i]);
+
+	if (!(rotation & valid_mask)) {
+		fb_helper->sw_rotations |= rotation;
+		return;
+	}
+
+	fb_crtc->rotation = rotation;
+	/* Rotating in hardware, fbcon should not rotate */
+	fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
+}
+
 static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			    u32 width, u32 height)
 {
@@ -2393,6 +2455,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 		drm_fb_helper_modeset_release(fb_helper,
 					      &fb_helper->crtc_info[i].mode_set);
 
+	fb_helper->sw_rotations = 0;
 	drm_fb_helper_for_each_connector(fb_helper, i) {
 		struct drm_display_mode *mode = modes[i];
 		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
@@ -2412,6 +2475,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
 			modeset->mode = drm_mode_duplicate(dev,
 							   fb_crtc->desired_mode);
 			drm_connector_get(connector);
+			drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
 			modeset->connectors[modeset->num_connectors++] = connector;
 			modeset->x = offset->x;
 			modeset->y = offset->y;
@@ -2453,6 +2517,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
 		}
 	}
 	mutex_unlock(&fb_helper->dev->mode_config.mutex);
+
+	switch (fb_helper->sw_rotations) {
+	case DRM_MODE_ROTATE_0:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_ROTATE_90:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_ROTATE_180:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_ROTATE_270:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	default:
+		/*
+		 * Multiple bits are set / multiple rotations requested
+		 * fbcon cannot handle separate rotation settings per
+		 * output, so fallback to unrotated.
+		 */
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+	}
 }
 
 /* Note: Drops fb_helper->lock before returning. */
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 33fe95927742..7fca941c2c57 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -48,6 +48,7 @@ struct drm_fb_helper_crtc {
 	struct drm_mode_set mode_set;
 	struct drm_display_mode *desired_mode;
 	int x, y;
+	int rotation;
 };
 
 /**
@@ -158,6 +159,13 @@ struct drm_fb_helper {
 	struct drm_fb_helper_crtc *crtc_info;
 	int connector_count;
 	int connector_info_alloc_count;
+	/**
+	 * @rotations:
+	 * Bitmask of all rotations requested for panel-orientation which
+	 * could not be handled in hardware. If only one bit is set
+	 * fbdev->fbcon_rotate_hint gets set to the requested rotation.
+	 */
+	int sw_rotations;
 	/**
 	 * @connector_info:
 	 *
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v5 5/7] drm/i915: Add "panel orientation" property to the panel connector

[Hans de Goede]

Ideally we could use the VBT for this, that would be simple, in
intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
connector->display_info.panel_orientation accordingly and call
drm_connector_init_panel_orientation_property(), done.

Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
with an upside down LCD and where the GOP is properly rotating the
EFI fb in hardware.

So instead we end up reading the rotation from the primary plane.
To read the info from the primary plane, we need to know which crtc
the panel is hooked up to, so we do this the first time the panel
encoder's get_config function get called, as by then the encoder
crtc routing has been set up.

This commit only implements the panel orientation property for DSI
panels on BYT / CHT / BXT hardware, as all known non normal oriented
panels are only found on this hardware.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Read back the rotation applied by the GOP from the primary plane
 instead of relying on dev_priv->vbt.dsi.config->rotation, because it
 seems that the VBT rotation filed is always 0 even on devices where the
 GOP does apply a rotation

Changes in v3:
-Rewrite the code to read back the orientation from the primary
 plane to contain all of this in intel_dsi.c instead of poking a bunch
 of holes between all the different layers
---
 drivers/gpu/drm/i915/intel_drv.h   |  1 +
 drivers/gpu/drm/i915/intel_dsi.c   | 48 ++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dsi.h   |  2 ++
 drivers/gpu/drm/i915/intel_panel.c | 16 +++++++++++++
 4 files changed, 67 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 47d022d48718..11efc6cb74c8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1727,6 +1727,7 @@ void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state);
 void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state);
 void intel_panel_destroy_backlight(struct drm_connector *connector);
+void intel_panel_set_orientation(struct intel_panel *panel, int orientation);
 enum drm_connector_status intel_panel_detect(struct drm_i915_private *dev_priv);
 extern struct drm_display_mode *intel_find_panel_downclock(
 				struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 83f15848098a..3e2f12db8d15 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1084,13 +1084,16 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
 	struct drm_display_mode *adjusted_mode_sw;
 	struct intel_crtc *intel_crtc;
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
 	unsigned int lane_count = intel_dsi->lane_count;
 	unsigned int bpp, fmt;
+	int orientation;
 	enum port port;
 	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
 	u16 hfp_sw, hsync_sw, hbp_sw;
 	u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
 				crtc_hblank_start_sw, crtc_hblank_end_sw;
+	u32 val;
 
 	/* FIXME: hw readout should not depend on SW state */
 	intel_crtc = to_intel_crtc(encoder->base.crtc);
@@ -1234,6 +1237,49 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
 	if (adjusted_mode->crtc_hblank_end = crtc_hblank_end_sw)
 		adjusted_mode->crtc_hblank_end  					adjusted_mode_sw->crtc_hblank_end;
+
+	if (!intel_dsi->got_panel_orientation) {
+		val = I915_READ(PLANE_CTL(intel_crtc->pipe, 0));
+		/* The rotation is used to correct for the panel orientation */
+		switch (val & PLANE_CTL_ROTATE_MASK) {
+		case PLANE_CTL_ROTATE_0:
+			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+			break;
+		case PLANE_CTL_ROTATE_90:
+			orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+			break;
+		case PLANE_CTL_ROTATE_180:
+			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+			break;
+		case PLANE_CTL_ROTATE_270:
+			orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
+			break;
+		}
+		intel_panel_set_orientation(panel, orientation);
+		intel_dsi->got_panel_orientation = true;
+	}
+}
+
+static void vlv_dsi_get_pipe_config(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
+	int orientation;
+	u32 val;
+
+	if (!intel_dsi->got_panel_orientation) {
+		val = I915_READ(DSPCNTR(intel_crtc->plane));
+
+		if (val & DISPPLANE_ROTATE_180)
+			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+		else
+			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+
+		intel_panel_set_orientation(panel, orientation);
+		intel_dsi->got_panel_orientation = true;
+	}
 }
 
 static void intel_dsi_get_config(struct intel_encoder *encoder,
@@ -1245,6 +1291,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
 
 	if (IS_GEN9_LP(dev_priv))
 		bxt_dsi_get_pipe_config(encoder, pipe_config);
+	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+		vlv_dsi_get_pipe_config(encoder);
 
 	pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp,
 				  pipe_config);
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 7afeb9580f41..92c2fe31f3fd 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -52,6 +52,8 @@ struct intel_dsi {
 	/* if true, use HS mode, otherwise LP */
 	bool hs;
 
+	bool got_panel_orientation;
+
 	/* virtual channel */
 	int channel;
 
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index adc51e452e3e..7d571bef847e 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1842,6 +1842,22 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
 	panel->backlight.present = false;
 }
 
+void intel_panel_set_orientation(struct intel_panel *panel, int orientation)
+{
+	struct intel_connector *panel_conn;
+	int width = 0, height = 0;
+
+	if (panel->fixed_mode) {
+		width = panel->fixed_mode->hdisplay;
+		height = panel->fixed_mode->vdisplay;
+	}
+
+	panel_conn = container_of(panel, struct intel_connector, panel);
+	panel_conn->base.display_info.panel_orientation = orientation;
+	drm_connector_init_panel_orientation_property(&panel_conn->base,
+						      width, height);
+}
+
 /* Set up chip specific backlight functions */
 static void
 intel_panel_init_backlight_funcs(struct intel_panel *panel)
-- 
2.14.3

[PATCH v5 5/7] drm/i915: Add "panel orientation" property to the panel connector

[Hans de Goede]

Ideally we could use the VBT for this, that would be simple, in
intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
connector->display_info.panel_orientation accordingly and call
drm_connector_init_panel_orientation_property(), done.

Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
with an upside down LCD and where the GOP is properly rotating the
EFI fb in hardware.

So instead we end up reading the rotation from the primary plane.
To read the info from the primary plane, we need to know which crtc
the panel is hooked up to, so we do this the first time the panel
encoder's get_config function get called, as by then the encoder
crtc routing has been set up.

This commit only implements the panel orientation property for DSI
panels on BYT / CHT / BXT hardware, as all known non normal oriented
panels are only found on this hardware.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Read back the rotation applied by the GOP from the primary plane
 instead of relying on dev_priv->vbt.dsi.config->rotation, because it
 seems that the VBT rotation filed is always 0 even on devices where the
 GOP does apply a rotation

Changes in v3:
-Rewrite the code to read back the orientation from the primary
 plane to contain all of this in intel_dsi.c instead of poking a bunch
 of holes between all the different layers
---
 drivers/gpu/drm/i915/intel_drv.h   |  1 +
 drivers/gpu/drm/i915/intel_dsi.c   | 48 ++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_dsi.h   |  2 ++
 drivers/gpu/drm/i915/intel_panel.c | 16 +++++++++++++
 4 files changed, 67 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 47d022d48718..11efc6cb74c8 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1727,6 +1727,7 @@ void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state,
 				  const struct drm_connector_state *conn_state);
 void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state);
 void intel_panel_destroy_backlight(struct drm_connector *connector);
+void intel_panel_set_orientation(struct intel_panel *panel, int orientation);
 enum drm_connector_status intel_panel_detect(struct drm_i915_private *dev_priv);
 extern struct drm_display_mode *intel_find_panel_downclock(
 				struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 83f15848098a..3e2f12db8d15 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -1084,13 +1084,16 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
 	struct drm_display_mode *adjusted_mode_sw;
 	struct intel_crtc *intel_crtc;
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
 	unsigned int lane_count = intel_dsi->lane_count;
 	unsigned int bpp, fmt;
+	int orientation;
 	enum port port;
 	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
 	u16 hfp_sw, hsync_sw, hbp_sw;
 	u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
 				crtc_hblank_start_sw, crtc_hblank_end_sw;
+	u32 val;
 
 	/* FIXME: hw readout should not depend on SW state */
 	intel_crtc = to_intel_crtc(encoder->base.crtc);
@@ -1234,6 +1237,49 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
 	if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
 		adjusted_mode->crtc_hblank_end =
 					adjusted_mode_sw->crtc_hblank_end;
+
+	if (!intel_dsi->got_panel_orientation) {
+		val = I915_READ(PLANE_CTL(intel_crtc->pipe, 0));
+		/* The rotation is used to correct for the panel orientation */
+		switch (val & PLANE_CTL_ROTATE_MASK) {
+		case PLANE_CTL_ROTATE_0:
+			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+			break;
+		case PLANE_CTL_ROTATE_90:
+			orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+			break;
+		case PLANE_CTL_ROTATE_180:
+			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+			break;
+		case PLANE_CTL_ROTATE_270:
+			orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
+			break;
+		}
+		intel_panel_set_orientation(panel, orientation);
+		intel_dsi->got_panel_orientation = true;
+	}
+}
+
+static void vlv_dsi_get_pipe_config(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
+	int orientation;
+	u32 val;
+
+	if (!intel_dsi->got_panel_orientation) {
+		val = I915_READ(DSPCNTR(intel_crtc->plane));
+
+		if (val & DISPPLANE_ROTATE_180)
+			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+		else
+			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+
+		intel_panel_set_orientation(panel, orientation);
+		intel_dsi->got_panel_orientation = true;
+	}
 }
 
 static void intel_dsi_get_config(struct intel_encoder *encoder,
@@ -1245,6 +1291,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
 
 	if (IS_GEN9_LP(dev_priv))
 		bxt_dsi_get_pipe_config(encoder, pipe_config);
+	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+		vlv_dsi_get_pipe_config(encoder);
 
 	pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp,
 				  pipe_config);
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 7afeb9580f41..92c2fe31f3fd 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -52,6 +52,8 @@ struct intel_dsi {
 	/* if true, use HS mode, otherwise LP */
 	bool hs;
 
+	bool got_panel_orientation;
+
 	/* virtual channel */
 	int channel;
 
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index adc51e452e3e..7d571bef847e 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1842,6 +1842,22 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
 	panel->backlight.present = false;
 }
 
+void intel_panel_set_orientation(struct intel_panel *panel, int orientation)
+{
+	struct intel_connector *panel_conn;
+	int width = 0, height = 0;
+
+	if (panel->fixed_mode) {
+		width = panel->fixed_mode->hdisplay;
+		height = panel->fixed_mode->vdisplay;
+	}
+
+	panel_conn = container_of(panel, struct intel_connector, panel);
+	panel_conn->base.display_info.panel_orientation = orientation;
+	drm_connector_init_panel_orientation_property(&panel_conn->base,
+						      width, height);
+}
+
 /* Set up chip specific backlight functions */
 static void
 intel_panel_init_backlight_funcs(struct intel_panel *panel)
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v5 6/7] efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirk

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but rotated by 90 degrees. In this case we want the console to
automatically be rotated to compensate.

The drm subsys has a quirk table for this, use the
drm_get_panel_orientation_quirk function to get the panel orientation
and set info->fbcon_rotate_hint based on this, so that the fbcon console
on top of efifb gets automatically rotated to compensate for the panel
orientation.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/Kconfig |  1 +
 drivers/video/fbdev/efifb.c | 21 ++++++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5e58f5ec0a28..c4a90c497839 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -772,6 +772,7 @@ config FB_VESA
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
 	depends on (FB = y) && !IA64 && EFI
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index 3a010641f630..8c7f6aeee205 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -15,6 +15,8 @@
 #include <linux/screen_info.h>
 #include <video/vga.h>
 #include <asm/efi.h>
+#include <drm/drm_utils.h> /* For drm_get_panel_orientation_quirk */
+#include <drm/drm_mode.h>  /* For DRM_MODE_PANEL_ORIENTATION_* */
 
 static bool request_mem_succeeded = false;
 static bool nowc = false;
@@ -156,7 +158,7 @@ static u64 bar_offset;
 static int efifb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
-	int err;
+	int err, orientation;
 	unsigned int size_vmode;
 	unsigned int size_remap;
 	unsigned int size_total;
@@ -328,6 +330,23 @@ static int efifb_probe(struct platform_device *dev)
 	info->fix = efifb_fix;
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE;
 
+	orientation = drm_get_panel_orientation_quirk(efifb_defined.xres,
+						      efifb_defined.yres);
+	switch (orientation) {
+	default:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	}
+
 	err = sysfs_create_groups(&dev->dev.kobj, efifb_groups);
 	if (err) {
 		pr_err("efifb: cannot add sysfs attrs\n");
-- 
2.14.3

[PATCH v5 6/7] efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirk

[Hans de Goede]

On some hardware the LCD panel is not mounted upright in the casing,
but rotated by 90 degrees. In this case we want the console to
automatically be rotated to compensate.

The drm subsys has a quirk table for this, use the
drm_get_panel_orientation_quirk function to get the panel orientation
and set info->fbcon_rotate_hint based on this, so that the fbcon console
on top of efifb gets automatically rotated to compensate for the panel
orientation.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/Kconfig |  1 +
 drivers/video/fbdev/efifb.c | 21 ++++++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 5e58f5ec0a28..c4a90c497839 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -772,6 +772,7 @@ config FB_VESA
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
 	depends on (FB = y) && !IA64 && EFI
+	select DRM_PANEL_ORIENTATION_QUIRKS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index 3a010641f630..8c7f6aeee205 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -15,6 +15,8 @@
 #include <linux/screen_info.h>
 #include <video/vga.h>
 #include <asm/efi.h>
+#include <drm/drm_utils.h> /* For drm_get_panel_orientation_quirk */
+#include <drm/drm_mode.h>  /* For DRM_MODE_PANEL_ORIENTATION_* */
 
 static bool request_mem_succeeded = false;
 static bool nowc = false;
@@ -156,7 +158,7 @@ static u64 bar_offset;
 static int efifb_probe(struct platform_device *dev)
 {
 	struct fb_info *info;
-	int err;
+	int err, orientation;
 	unsigned int size_vmode;
 	unsigned int size_remap;
 	unsigned int size_total;
@@ -328,6 +330,23 @@ static int efifb_probe(struct platform_device *dev)
 	info->fix = efifb_fix;
 	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE;
 
+	orientation = drm_get_panel_orientation_quirk(efifb_defined.xres,
+						      efifb_defined.yres);
+	switch (orientation) {
+	default:
+		info->fbcon_rotate_hint = FB_ROTATE_UR;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_UD;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CCW;
+		break;
+	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
+		info->fbcon_rotate_hint = FB_ROTATE_CW;
+		break;
+	}
+
 	err = sysfs_create_groups(&dev->dev.kobj, efifb_groups);
 	if (err) {
 		pr_err("efifb: cannot add sysfs attrs\n");
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v5 7/7] fbcon: Remove dmi quirk table

[Hans de Goede]

This is now all handled in the drivers and communicated through
fb_info.fbcon_rotate_hint.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/Makefile           |   3 -
 drivers/video/fbdev/core/fbcon.c            |   4 +-
 drivers/video/fbdev/core/fbcon.h            |   6 --
 drivers/video/fbdev/core/fbcon_dmi_quirks.c | 145 ----------------------------
 4 files changed, 2 insertions(+), 156 deletions(-)
 delete mode 100644 drivers/video/fbdev/core/fbcon_dmi_quirks.c

diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
index 73493bbd7a15..0214b863ac3f 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -14,9 +14,6 @@ ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
 fb-y				  += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
 				     fbcon_ccw.o
 endif
-ifeq ($(CONFIG_DMI),y)
-fb-y				  += fbcon_dmi_quirks.o
-endif
 endif
 fb-objs                           := $(fb-y)
 
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index fb317ed76b45..157a40670a47 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -968,7 +968,7 @@ static const char *fbcon_startup(void)
 	if (p->con_rotate = -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate = -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
@@ -1111,7 +1111,7 @@ static void fbcon_init(struct vc_data *vc, int init)
 	if (p->con_rotate = -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate = -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 18f3ac144237..3746828356ed 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -261,10 +261,4 @@ extern void fbcon_set_rotate(struct fbcon_ops *ops);
 #define fbcon_set_rotate(x) do {} while(0)
 #endif /* CONFIG_FRAMEBUFFER_CONSOLE_ROTATION */
 
-#ifdef CONFIG_DMI
-int fbcon_platform_get_rotate(struct fb_info *info);
-#else
-#define fbcon_platform_get_rotate(i) FB_ROTATE_UR
-#endif /* CONFIG_DMI */
-
 #endif /* _VIDEO_FBCON_H */
diff --git a/drivers/video/fbdev/core/fbcon_dmi_quirks.c b/drivers/video/fbdev/core/fbcon_dmi_quirks.c
deleted file mode 100644
index 6904e47d1e51..000000000000
--- a/drivers/video/fbdev/core/fbcon_dmi_quirks.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  fbcon_dmi_quirks.c -- DMI based quirk detection for fbcon
- *
- *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/dmi.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include "fbcon.h"
-
-/*
- * Some x86 clamshell design devices use portrait tablet screens and a display
- * engine which cannot rotate in hardware, so we need to rotate the fbcon to
- * compensate. Unfortunately these (cheap) devices also typically have quite
- * generic DMI data, so we match on a combination of DMI data, screen resolution
- * and a list of known BIOS dates to avoid false positives.
- */
-
-struct fbcon_dmi_rotate_data {
-	int width;
-	int height;
-	const char * const *bios_dates;
-	int rotate;
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_asus_t100ha = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CCW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_pocket = {
-	.width = 1200,
-	.height = 1920,
-	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
-		"07/05/2017", "08/07/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_win = {
-	.width = 720,
-	.height = 1280,
-	.bios_dates = (const char * const []){
-		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
-		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_itworks_tw891 = {
-	.width = 800,
-	.height = 1280,
-	.bios_dates = (const char * const []){ "10/16/2015", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_vios_lth17 = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct dmi_system_id rotate_data[] = {
-	{	/* Asus T100HA */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
-		},
-		.driver_data = (void *)&rotate_data_asus_t100ha,
-	}, {	/*
-		 * GPD Pocket, note that the the DMI data is less generic then
-		 * it seems, devices with a board-vendor of "AMI Corporation"
-		 * are quite rare, as are devices which have both board- *and*
-		 * product-id set to "Default String"
-		 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_pocket,
-	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_win,
-	}, {	/* I.T.Works TW891 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
-		},
-		.driver_data = (void *)&rotate_data_itworks_tw891,
-	}, {	/* VIOS LTH17 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "LTH17"),
-		},
-		.driver_data = (void *)&rotate_data_vios_lth17,
-	},
-	{}
-};
-
-int fbcon_platform_get_rotate(struct fb_info *info)
-{
-	const struct dmi_system_id *match;
-	const struct fbcon_dmi_rotate_data *data;
-	const char *bios_date;
-	int i;
-
-	for (match = dmi_first_match(rotate_data);
-	     match;
-	     match = dmi_first_match(match + 1)) {
-		data = match->driver_data;
-
-		if (data->width != info->var.xres ||
-		    data->height != info->var.yres)
-			continue;
-
-		if (!data->bios_dates)
-			return data->rotate;
-
-		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
-		if (!bios_date)
-			continue;
-
-		for (i = 0; data->bios_dates[i]; i++) {
-			if (!strcmp(data->bios_dates[i], bios_date))
-				return data->rotate;
-		}
-	}
-
-	return FB_ROTATE_UR;
-}
-- 
2.14.3

[PATCH v5 7/7] fbcon: Remove dmi quirk table

[Hans de Goede]

This is now all handled in the drivers and communicated through
fb_info.fbcon_rotate_hint.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/video/fbdev/core/Makefile           |   3 -
 drivers/video/fbdev/core/fbcon.c            |   4 +-
 drivers/video/fbdev/core/fbcon.h            |   6 --
 drivers/video/fbdev/core/fbcon_dmi_quirks.c | 145 ----------------------------
 4 files changed, 2 insertions(+), 156 deletions(-)
 delete mode 100644 drivers/video/fbdev/core/fbcon_dmi_quirks.c

diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
index 73493bbd7a15..0214b863ac3f 100644
--- a/drivers/video/fbdev/core/Makefile
+++ b/drivers/video/fbdev/core/Makefile
@@ -14,9 +14,6 @@ ifeq ($(CONFIG_FRAMEBUFFER_CONSOLE_ROTATION),y)
 fb-y				  += fbcon_rotate.o fbcon_cw.o fbcon_ud.o \
 				     fbcon_ccw.o
 endif
-ifeq ($(CONFIG_DMI),y)
-fb-y				  += fbcon_dmi_quirks.o
-endif
 endif
 fb-objs                           := $(fb-y)
 
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index fb317ed76b45..157a40670a47 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -968,7 +968,7 @@ static const char *fbcon_startup(void)
 	if (p->con_rotate == -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate == -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
@@ -1111,7 +1111,7 @@ static void fbcon_init(struct vc_data *vc, int init)
 	if (p->con_rotate == -1)
 		p->con_rotate = info->fbcon_rotate_hint;
 	if (p->con_rotate == -1)
-		p->con_rotate = fbcon_platform_get_rotate(info);
+		p->con_rotate = FB_ROTATE_UR;
 
 	set_blitting_type(vc, info);
 
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 18f3ac144237..3746828356ed 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -261,10 +261,4 @@ extern void fbcon_set_rotate(struct fbcon_ops *ops);
 #define fbcon_set_rotate(x) do {} while(0)
 #endif /* CONFIG_FRAMEBUFFER_CONSOLE_ROTATION */
 
-#ifdef CONFIG_DMI
-int fbcon_platform_get_rotate(struct fb_info *info);
-#else
-#define fbcon_platform_get_rotate(i) FB_ROTATE_UR
-#endif /* CONFIG_DMI */
-
 #endif /* _VIDEO_FBCON_H */
diff --git a/drivers/video/fbdev/core/fbcon_dmi_quirks.c b/drivers/video/fbdev/core/fbcon_dmi_quirks.c
deleted file mode 100644
index 6904e47d1e51..000000000000
--- a/drivers/video/fbdev/core/fbcon_dmi_quirks.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  fbcon_dmi_quirks.c -- DMI based quirk detection for fbcon
- *
- *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/dmi.h>
-#include <linux/fb.h>
-#include <linux/kernel.h>
-#include "fbcon.h"
-
-/*
- * Some x86 clamshell design devices use portrait tablet screens and a display
- * engine which cannot rotate in hardware, so we need to rotate the fbcon to
- * compensate. Unfortunately these (cheap) devices also typically have quite
- * generic DMI data, so we match on a combination of DMI data, screen resolution
- * and a list of known BIOS dates to avoid false positives.
- */
-
-struct fbcon_dmi_rotate_data {
-	int width;
-	int height;
-	const char * const *bios_dates;
-	int rotate;
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_asus_t100ha = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CCW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_pocket = {
-	.width = 1200,
-	.height = 1920,
-	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
-		"07/05/2017", "08/07/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_gpd_win = {
-	.width = 720,
-	.height = 1280,
-	.bios_dates = (const char * const []){
-		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
-		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_itworks_tw891 = {
-	.width = 800,
-	.height = 1280,
-	.bios_dates = (const char * const []){ "10/16/2015", NULL },
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct fbcon_dmi_rotate_data rotate_data_vios_lth17 = {
-	.width = 800,
-	.height = 1280,
-	.rotate = FB_ROTATE_CW,
-};
-
-static const struct dmi_system_id rotate_data[] = {
-	{	/* Asus T100HA */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
-		},
-		.driver_data = (void *)&rotate_data_asus_t100ha,
-	}, {	/*
-		 * GPD Pocket, note that the the DMI data is less generic then
-		 * it seems, devices with a board-vendor of "AMI Corporation"
-		 * are quite rare, as are devices which have both board- *and*
-		 * product-id set to "Default String"
-		 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_pocket,
-	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
-		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
-		},
-		.driver_data = (void *)&rotate_data_gpd_win,
-	}, {	/* I.T.Works TW891 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
-		},
-		.driver_data = (void *)&rotate_data_itworks_tw891,
-	}, {	/* VIOS LTH17 */
-		.matches = {
-		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
-		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "VIOS"),
-		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "LTH17"),
-		},
-		.driver_data = (void *)&rotate_data_vios_lth17,
-	},
-	{}
-};
-
-int fbcon_platform_get_rotate(struct fb_info *info)
-{
-	const struct dmi_system_id *match;
-	const struct fbcon_dmi_rotate_data *data;
-	const char *bios_date;
-	int i;
-
-	for (match = dmi_first_match(rotate_data);
-	     match;
-	     match = dmi_first_match(match + 1)) {
-		data = match->driver_data;
-
-		if (data->width != info->var.xres ||
-		    data->height != info->var.yres)
-			continue;
-
-		if (!data->bios_dates)
-			return data->rotate;
-
-		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
-		if (!bios_date)
-			continue;
-
-		for (i = 0; data->bios_dates[i]; i++) {
-			if (!strcmp(data->bios_dates[i], bios_date))
-				return data->rotate;
-		}
-	}
-
-	return FB_ROTATE_UR;
-}
-- 
2.14.3

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: warning for drm/fbdev: Panel orientation connector property support (rev3)

[Patchwork]

== Series Details ==

Series: drm/fbdev: Panel orientation connector property support (rev3)
URL   : https://patchwork.freedesktop.org/series/32447/
State : warning

== Summary ==

Series 32447v3 drm/fbdev: Panel orientation connector property support
https://patchwork.freedesktop.org/api/1.0/series/32447/revisions/3/mbox/

Test gem_basic:
        Subgroup create-close:
                dmesg-warn -> PASS       (fi-cfl-s)
        Subgroup create-fd-close:
                dmesg-warn -> PASS       (fi-cfl-s)
Test kms_busy:
        Subgroup basic-flip-a:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-b:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-c:
                pass       -> SKIP       (fi-hsw-4770r)
Test kms_cursor_legacy:
        Subgroup basic-busy-flip-before-cursor-atomic:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-busy-flip-before-cursor-legacy:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-after-cursor-atomic:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-after-cursor-legacy:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-after-cursor-varying-size:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-before-cursor-atomic:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-before-cursor-legacy:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-before-cursor-varying-size:
                pass       -> SKIP       (fi-hsw-4770r)
Test kms_flip:
        Subgroup basic-flip-vs-dpms:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-vs-modeset:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-flip-vs-wf_vblank:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-plain-flip:
                pass       -> SKIP       (fi-hsw-4770r)
Test kms_frontbuffer_tracking:
        Subgroup basic:
                pass       -> SKIP       (fi-hsw-4770r)
Test kms_pipe_crc_basic:
        Subgroup hang-read-crc-pipe-a:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup hang-read-crc-pipe-b:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup hang-read-crc-pipe-c:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup nonblocking-crc-pipe-a:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup nonblocking-crc-pipe-a-frame-sequence:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup nonblocking-crc-pipe-b:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup nonblocking-crc-pipe-b-frame-sequence:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup nonblocking-crc-pipe-c:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup nonblocking-crc-pipe-c-frame-sequence:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup read-crc-pipe-a:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup read-crc-pipe-a-frame-sequence:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup read-crc-pipe-b:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup read-crc-pipe-b-frame-sequence:
                pass       -> SKIP       (fi-hsw-4770r) fdo#102332
        Subgroup read-crc-pipe-c:
                pass       -> SKIP       (fi-hsw-4770r)
                dmesg-warn -> PASS       (fi-bsw-n3050)
        Subgroup read-crc-pipe-c-frame-sequence:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup suspend-read-crc-pipe-a:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup suspend-read-crc-pipe-b:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup suspend-read-crc-pipe-c:
                pass       -> SKIP       (fi-hsw-4770r)
Test pm_rpm:
        Subgroup basic-pci-d3-state:
                pass       -> SKIP       (fi-hsw-4770r)
        Subgroup basic-rte:
                pass       -> SKIP       (fi-hsw-4770r)
Test prime_vgem:
        Subgroup basic-fence-flip:
                pass       -> SKIP       (fi-hsw-4770r)
Test drv_module_reload:
        Subgroup basic-reload:
                pass       -> DMESG-WARN (fi-bsw-n3050) fdo#103479

fdo#102332 https://bugs.freedesktop.org/show_bug.cgi?id=102332
fdo#103479 https://bugs.freedesktop.org/show_bug.cgi?id=103479

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:447s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:452s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:380s
WARNING: Long output truncated

8b0ae6b50a229dc661a02f4034252ee854cc9b83 drm-tip: 2017y-11m-03d-17h-15m-57s UTC integration manifest
39315ed8f4d3 fbcon: Remove dmi quirk table
35c54066c7e4 efifb: Set info->fbcon_rotate_hint based on drm_get_panel_orientation_quirk
b4a63a246290 drm/i915: Add "panel orientation" property to the panel connector
628e99593fa8 drm/fb-helper: Apply panel orientation connector prop to the primary plane
81a392184e6a drm: Add support for a panel-orientation connector property
ed467e5b342b drm: Add panel orientation quirks
4ef0143ab25e fbcon: Add fbcon_rotate_hint to struct fb_info

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_6959/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v5 2/7] drm: Add panel orientation quirks

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:23PM +0100, Hans de Goede wrote:
> Some x86 clamshell design devices use portrait tablet screens and a display
> engine which cannot rotate in hardware, so the firmware just leaves things
> as is and we cannot figure out that the display is oriented non upright
> from the hardware.
> 
> So at least on x86, we need a quirk table for this. This commit adds a DMI
> based quirk table which is initially populated with 5 such devices: Asus
> T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.
> 
> This quirk table will be used by the drm code to let userspace know that
> the display is not mounted upright inside the devices case through a new
> panel orientation drm-connector property, as well as to tell fbcon to
> rotate the console so that it shows the right way up.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v5:
> -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()

The kerneldoc isn't much use without pulling it into the overall
structure. Documentation/gpu/drm-kms-helper.rst seems like a suitable
place. Pls also check it builds correctly and looks pretty using

$ make htmldocs

With that fixed:

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
>  keeping only the (identical) sys_vendor and product_name matches.
>  This is necessary because an older version of the bios has
>  board_vendor set to VOIS instead of VIOS
> ---
>  drivers/gpu/drm/Kconfig                        |   3 +
>  drivers/gpu/drm/Makefile                       |   1 +
>  drivers/gpu/drm/drm_panel_orientation_quirks.c | 174 +++++++++++++++++++++++++
>  include/drm/drm_utils.h                        |  18 +++
>  4 files changed, 196 insertions(+)
>  create mode 100644 drivers/gpu/drm/drm_panel_orientation_quirks.c
>  create mode 100644 include/drm/drm_utils.h
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 4d9f21831741..9d005ac98c2b 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -26,6 +26,9 @@ config DRM_MIPI_DSI
>  	bool
>  	depends on DRM
>  
> +config DRM_PANEL_ORIENTATION_QUIRKS
> +	tristate
> +
>  config DRM_DP_AUX_CHARDEV
>  	bool "DRM DP AUX Interface"
>  	depends on DRM
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index a3fdc5a68dff..ffb621819bbf 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
>  
>  obj-$(CONFIG_DRM)	+= drm.o
>  obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
> +obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
>  obj-$(CONFIG_DRM_ARM)	+= arm/
>  obj-$(CONFIG_DRM_TTM)	+= ttm/
>  obj-$(CONFIG_DRM_TDFX)	+= tdfx/
> diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> new file mode 100644
> index 000000000000..b8765e2ed1d6
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> @@ -0,0 +1,174 @@
> +/*
> + *  drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
> + *
> + *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
> + *
> + *  This file is subject to the terms and conditions of the GNU General Public
> + *  License.  See the file COPYING in the main directory of this archive for
> + *  more details.
> + */
> +
> +#include <linux/dmi.h>
> +#include <drm/drm_connector.h>
> +
> +#ifdef CONFIG_DMI
> +
> +/*
> + * Some x86 clamshell design devices use portrait tablet screens and a display
> + * engine which cannot rotate in hardware, so we need to rotate the fbcon to
> + * compensate. Unfortunately these (cheap) devices also typically have quite
> + * generic DMI data, so we match on a combination of DMI data, screen resolution
> + * and a list of known BIOS dates to avoid false positives.
> + */
> +
> +struct drm_dmi_panel_orientation_data {
> +	int width;
> +	int height;
> +	const char * const *bios_dates;
> +	int orientation;
> +};
> +
> +static const struct drm_dmi_panel_orientation_data asus_t100ha = {
> +	.width = 800,
> +	.height = 1280,
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data gpd_pocket = {
> +	.width = 1200,
> +	.height = 1920,
> +	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
> +		"07/05/2017", "08/07/2017", NULL },
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data gpd_win = {
> +	.width = 720,
> +	.height = 1280,
> +	.bios_dates = (const char * const []){
> +		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
> +		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
> +	.width = 800,
> +	.height = 1280,
> +	.bios_dates = (const char * const []){ "10/16/2015", NULL },
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data vios_lth17 = {
> +	.width = 800,
> +	.height = 1280,
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct dmi_system_id orientation_data[] = {
> +	{	/* Asus T100HA */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
> +		},
> +		.driver_data = (void *)&asus_t100ha,
> +	}, {	/*
> +		 * GPD Pocket, note that the the DMI data is less generic then
> +		 * it seems, devices with a board-vendor of "AMI Corporation"
> +		 * are quite rare, as are devices which have both board- *and*
> +		 * product-id set to "Default String"
> +		 */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
> +		},
> +		.driver_data = (void *)&gpd_pocket,
> +	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
> +		},
> +		.driver_data = (void *)&gpd_win,
> +	}, {	/* I.T.Works TW891 */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
> +		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
> +		},
> +		.driver_data = (void *)&itworks_tw891,
> +	}, {	/* VIOS LTH17 */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
> +		},
> +		.driver_data = (void *)&vios_lth17,
> +	},
> +	{}
> +};
> +
> +/**
> + * drm_get_panel_orientation_quirk - Check for panel orientation quirks
> + * @width: width in pixels of the panel
> + * @height: height in pixels of the panel
> + *
> + * This function checks for platform specific (e.g. DMI based) quirks
> + * providing info on panel_orientation for systems where this cannot be
> + * probed from the hard-/firm-ware. To avoid false-positive this function
> + * takes the panel resolution as argument and checks that against the
> + * resolution expected by the quirk-table entry.
> + *
> + * Note this function is also used outside of the drm-subsys, by for example
> + * the efifb code. Because of this this function gets compiled into its own
> + * kernel-module when built as a module.
> + *
> + * Returns:
> + * A DRM_MODE_PANEL_ORIENTATION_* value if there is a quirk for this system,
> + * or DRM_MODE_PANEL_ORIENTATION_UNKNOWN if there is no quirk.
> + */
> +int drm_get_panel_orientation_quirk(int width, int height)
> +{
> +	const struct dmi_system_id *match;
> +	const struct drm_dmi_panel_orientation_data *data;
> +	const char *bios_date;
> +	int i;
> +
> +	for (match = dmi_first_match(orientation_data);
> +	     match;
> +	     match = dmi_first_match(match + 1)) {
> +		data = match->driver_data;
> +
> +		if (data->width != width ||
> +		    data->height != height)
> +			continue;
> +
> +		if (!data->bios_dates)
> +			return data->orientation;
> +
> +		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
> +		if (!bios_date)
> +			continue;
> +
> +		for (i = 0; data->bios_dates[i]; i++) {
> +			if (!strcmp(data->bios_dates[i], bios_date))
> +				return data->orientation;
> +		}
> +	}
> +
> +	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
> +
> +#else
> +
> +/* There are no quirks for non x86 devices yet */
> +int drm_get_panel_orientation_quirk(int width, int height)
> +{
> +	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
> +
> +#endif
> diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
> new file mode 100644
> index 000000000000..cea362aeaffe
> --- /dev/null
> +++ b/include/drm/drm_utils.h
> @@ -0,0 +1,18 @@
> +/*
> + * Function prototypes for misc. drm utility functions.
> + * Specifically this file is for function prototypes for functions which
> + * may also be used outside of drm code (e.g. in fbdev drivers).
> + *
> + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __DRM_UTILS_H__
> +#define __DRM_UTILS_H__
> +
> +int drm_get_panel_orientation_quirk(int width, int height);
> +
> +#endif
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [Intel-gfx] [PATCH v5 2/7] drm: Add panel orientation quirks

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:23PM +0100, Hans de Goede wrote:
> Some x86 clamshell design devices use portrait tablet screens and a display
> engine which cannot rotate in hardware, so the firmware just leaves things
> as is and we cannot figure out that the display is oriented non upright
> from the hardware.
> 
> So at least on x86, we need a quirk table for this. This commit adds a DMI
> based quirk table which is initially populated with 5 such devices: Asus
> T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.
> 
> This quirk table will be used by the drm code to let userspace know that
> the display is not mounted upright inside the devices case through a new
> panel orientation drm-connector property, as well as to tell fbcon to
> rotate the console so that it shows the right way up.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v5:
> -Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()

The kerneldoc isn't much use without pulling it into the overall
structure. Documentation/gpu/drm-kms-helper.rst seems like a suitable
place. Pls also check it builds correctly and looks pretty using

$ make htmldocs

With that fixed:

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> -Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
>  keeping only the (identical) sys_vendor and product_name matches.
>  This is necessary because an older version of the bios has
>  board_vendor set to VOIS instead of VIOS
> ---
>  drivers/gpu/drm/Kconfig                        |   3 +
>  drivers/gpu/drm/Makefile                       |   1 +
>  drivers/gpu/drm/drm_panel_orientation_quirks.c | 174 +++++++++++++++++++++++++
>  include/drm/drm_utils.h                        |  18 +++
>  4 files changed, 196 insertions(+)
>  create mode 100644 drivers/gpu/drm/drm_panel_orientation_quirks.c
>  create mode 100644 include/drm/drm_utils.h
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 4d9f21831741..9d005ac98c2b 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -26,6 +26,9 @@ config DRM_MIPI_DSI
>  	bool
>  	depends on DRM
>  
> +config DRM_PANEL_ORIENTATION_QUIRKS
> +	tristate
> +
>  config DRM_DP_AUX_CHARDEV
>  	bool "DRM DP AUX Interface"
>  	depends on DRM
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index a3fdc5a68dff..ffb621819bbf 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
>  
>  obj-$(CONFIG_DRM)	+= drm.o
>  obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
> +obj-$(CONFIG_DRM_PANEL_ORIENTATION_QUIRKS) += drm_panel_orientation_quirks.o
>  obj-$(CONFIG_DRM_ARM)	+= arm/
>  obj-$(CONFIG_DRM_TTM)	+= ttm/
>  obj-$(CONFIG_DRM_TDFX)	+= tdfx/
> diff --git a/drivers/gpu/drm/drm_panel_orientation_quirks.c b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> new file mode 100644
> index 000000000000..b8765e2ed1d6
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_panel_orientation_quirks.c
> @@ -0,0 +1,174 @@
> +/*
> + *  drm_panel_orientation_quirks.c -- Quirks for non-normal panel orientation
> + *
> + *	Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
> + *
> + *  This file is subject to the terms and conditions of the GNU General Public
> + *  License.  See the file COPYING in the main directory of this archive for
> + *  more details.
> + */
> +
> +#include <linux/dmi.h>
> +#include <drm/drm_connector.h>
> +
> +#ifdef CONFIG_DMI
> +
> +/*
> + * Some x86 clamshell design devices use portrait tablet screens and a display
> + * engine which cannot rotate in hardware, so we need to rotate the fbcon to
> + * compensate. Unfortunately these (cheap) devices also typically have quite
> + * generic DMI data, so we match on a combination of DMI data, screen resolution
> + * and a list of known BIOS dates to avoid false positives.
> + */
> +
> +struct drm_dmi_panel_orientation_data {
> +	int width;
> +	int height;
> +	const char * const *bios_dates;
> +	int orientation;
> +};
> +
> +static const struct drm_dmi_panel_orientation_data asus_t100ha = {
> +	.width = 800,
> +	.height = 1280,
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data gpd_pocket = {
> +	.width = 1200,
> +	.height = 1920,
> +	.bios_dates = (const char * const []){ "05/26/2017", "06/28/2017",
> +		"07/05/2017", "08/07/2017", NULL },
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data gpd_win = {
> +	.width = 720,
> +	.height = 1280,
> +	.bios_dates = (const char * const []){
> +		"10/25/2016", "11/18/2016", "12/23/2016", "12/26/2016",
> +		"02/21/2017", "03/20/2017", "05/25/2017", NULL },
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data itworks_tw891 = {
> +	.width = 800,
> +	.height = 1280,
> +	.bios_dates = (const char * const []){ "10/16/2015", NULL },
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct drm_dmi_panel_orientation_data vios_lth17 = {
> +	.width = 800,
> +	.height = 1280,
> +	.orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> +};
> +
> +static const struct dmi_system_id orientation_data[] = {
> +	{	/* Asus T100HA */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
> +		},
> +		.driver_data = (void *)&asus_t100ha,
> +	}, {	/*
> +		 * GPD Pocket, note that the the DMI data is less generic then
> +		 * it seems, devices with a board-vendor of "AMI Corporation"
> +		 * are quite rare, as are devices which have both board- *and*
> +		 * product-id set to "Default String"
> +		 */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
> +		},
> +		.driver_data = (void *)&gpd_pocket,
> +	}, {	/* GPD Win (same note on DMI match as GPD Pocket) */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
> +		},
> +		.driver_data = (void *)&gpd_win,
> +	}, {	/* I.T.Works TW891 */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TW891"),
> +		  DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
> +		  DMI_EXACT_MATCH(DMI_BOARD_NAME, "TW891"),
> +		},
> +		.driver_data = (void *)&itworks_tw891,
> +	}, {	/* VIOS LTH17 */
> +		.matches = {
> +		  DMI_EXACT_MATCH(DMI_SYS_VENDOR, "VIOS"),
> +		  DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "LTH17"),
> +		},
> +		.driver_data = (void *)&vios_lth17,
> +	},
> +	{}
> +};
> +
> +/**
> + * drm_get_panel_orientation_quirk - Check for panel orientation quirks
> + * @width: width in pixels of the panel
> + * @height: height in pixels of the panel
> + *
> + * This function checks for platform specific (e.g. DMI based) quirks
> + * providing info on panel_orientation for systems where this cannot be
> + * probed from the hard-/firm-ware. To avoid false-positive this function
> + * takes the panel resolution as argument and checks that against the
> + * resolution expected by the quirk-table entry.
> + *
> + * Note this function is also used outside of the drm-subsys, by for example
> + * the efifb code. Because of this this function gets compiled into its own
> + * kernel-module when built as a module.
> + *
> + * Returns:
> + * A DRM_MODE_PANEL_ORIENTATION_* value if there is a quirk for this system,
> + * or DRM_MODE_PANEL_ORIENTATION_UNKNOWN if there is no quirk.
> + */
> +int drm_get_panel_orientation_quirk(int width, int height)
> +{
> +	const struct dmi_system_id *match;
> +	const struct drm_dmi_panel_orientation_data *data;
> +	const char *bios_date;
> +	int i;
> +
> +	for (match = dmi_first_match(orientation_data);
> +	     match;
> +	     match = dmi_first_match(match + 1)) {
> +		data = match->driver_data;
> +
> +		if (data->width != width ||
> +		    data->height != height)
> +			continue;
> +
> +		if (!data->bios_dates)
> +			return data->orientation;
> +
> +		bios_date = dmi_get_system_info(DMI_BIOS_DATE);
> +		if (!bios_date)
> +			continue;
> +
> +		for (i = 0; data->bios_dates[i]; i++) {
> +			if (!strcmp(data->bios_dates[i], bios_date))
> +				return data->orientation;
> +		}
> +	}
> +
> +	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
> +
> +#else
> +
> +/* There are no quirks for non x86 devices yet */
> +int drm_get_panel_orientation_quirk(int width, int height)
> +{
> +	return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +}
> +EXPORT_SYMBOL(drm_get_panel_orientation_quirk);
> +
> +#endif
> diff --git a/include/drm/drm_utils.h b/include/drm/drm_utils.h
> new file mode 100644
> index 000000000000..cea362aeaffe
> --- /dev/null
> +++ b/include/drm/drm_utils.h
> @@ -0,0 +1,18 @@
> +/*
> + * Function prototypes for misc. drm utility functions.
> + * Specifically this file is for function prototypes for functions which
> + * may also be used outside of drm code (e.g. in fbdev drivers).
> + *
> + * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __DRM_UTILS_H__
> +#define __DRM_UTILS_H__
> +
> +int drm_get_panel_orientation_quirk(int width, int height);
> +
> +#endif
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [Intel-gfx] [PATCH v5 3/7] drm: Add support for a panel-orientation connector property

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:24PM +0100, Hans de Goede wrote:
> On some devices the LCD panel is mounted in the casing in such a way that
> the up/top side of the panel does not match with the top side of the
> device (e.g. it is mounted upside-down).
> 
> This commit adds the necessary infra for lcd-panel drm_connector-s to
> have a "panel orientation" property to communicate how the panel is
> orientated vs the casing.
> 
> Userspace can use this property to check for non-normal orientation and
> then adjust the displayed image accordingly by rotating it to compensate.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---

btw in drm we'd like to record the per-patch changelog, pls put them above
the ---. I know everyone's different, it's silly.

> Changes in v2:
> -Rebased on 4.14-rc1
> -Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
>  access it easily
> -Have a single drm_connector_init_panel_orientation_property rather then
>  create and attach functions. The caller is expected to set
>  drm_display_info.panel_orientation before calling this, then this will
>  check for platform specific quirks overriding the panel_orientation and if
>  the panel_orientation is set after this then it will attach the property.
> ---
>  drivers/gpu/drm/Kconfig         |  1 +
>  drivers/gpu/drm/drm_connector.c | 73 +++++++++++++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h     | 11 +++++++
>  include/drm/drm_mode_config.h   |  7 ++++
>  include/uapi/drm/drm_mode.h     |  7 ++++
>  5 files changed, 99 insertions(+)
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 9d005ac98c2b..0b166e626eb6 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -7,6 +7,7 @@
>  menuconfig DRM
>  	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
>  	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
> +	select DRM_PANEL_ORIENTATION_QUIRKS
>  	select HDMI
>  	select FB_CMDLINE
>  	select I2C
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 704fc8934616..129c83a84320 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -24,6 +24,7 @@
>  #include <drm/drm_connector.h>
>  #include <drm/drm_edid.h>
>  #include <drm/drm_encoder.h>
> +#include <drm/drm_utils.h>
>  
>  #include "drm_crtc_internal.h"
>  #include "drm_internal.h"
> @@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
>  	mutex_init(&connector->mutex);
>  	connector->edid_blob_ptr = NULL;
>  	connector->status = connector_status_unknown;
> +	connector->display_info.panel_orientation > +		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
>  
>  	drm_connector_get_cmdline_mode(connector);
>  
> @@ -664,6 +667,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
>  	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
>  };
>  
> +static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
> +	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
> +	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
> +	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
> +	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
> +};
> +
>  static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
>  	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
>  	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
> @@ -768,6 +778,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
>   *
>   * CRTC_ID:
>   * 	Mode object ID of the &drm_crtc this connector should be connected to.
> + *
> + * Connectors for LCD panels may also have one standardized property:
> + *
> + * panel orientation:
> + *	On some devices the LCD panel is mounted in the casing in such a way
> + *	that the up/top side of the panel does not match with the top side of
> + *	the device. Userspace can use this property to check for this.
> + *	Note that input coordinates from touchscreens (input devices with
> + *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
> + *	coordinates, so if userspace rotates the picture to adjust for
> + *	the orientation it must also apply the same transformation to the
> + *	touchscreen input coordinates.
>   */
>  
>  int drm_connector_create_standard_properties(struct drm_device *dev)
> @@ -1234,6 +1256,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
>  }
>  EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
>  
> +/**
> + * drm_connector_init_panel_orientation_property -
> + *	initialize the connecters panel_orientation property
> + * @connector: connector for which to init the panel-orientation property.
> + * @width: width in pixels of the panel, used for panel quirk detection
> + * @height: height in pixels of the panel, used for panel quirk detection
> + *
> + * This function should only be called for built-in panels, after setting
> + * connector->display_info.panel_orientation first (if known).
> + *
> + * This function will check for platform specific (e.g. DMI based) quirks
> + * overriding display_info.panel_orientation first, then if panel_orientation
> + * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
> + * "panel orientation" property to the connector.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_init_panel_orientation_property(
> +	struct drm_connector *connector, int width, int height)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct drm_display_info *info = &connector->display_info;
> +	struct drm_property *prop;
> +	int orientation_quirk;
> +
> +	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> +	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		info->panel_orientation = orientation_quirk;
> +
> +	if (info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		return 0;
> +
> +	prop = dev->mode_config.panel_orientation_property;
> +	if (!prop) {
> +		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> +				"panel orientation",
> +				drm_panel_orientation_enum_list,
> +				ARRAY_SIZE(drm_panel_orientation_enum_list));
> +		if (!prop)
> +			return -ENOMEM;
> +
> +		dev->mode_config.panel_orientation_property = prop;
> +	}
> +
> +	drm_object_attach_property(&connector->base, prop,
> +				   info->panel_orientation);
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +
>  int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
>  				    struct drm_property *property,
>  				    uint64_t value)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index b4285c40e1e4..e6883065a461 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -222,6 +222,15 @@ struct drm_display_info {
>  #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
>  #define DRM_COLOR_FORMAT_YCRCB420	(1<<3)
>  
> +	/**
> +	 * @panel_orientation: Read only connector property for built-in panels,
> +	 * indicating the orientation of the panel vs the device's casing.
> +	 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
> +	 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
> +	 * fb to compensate and gets exported as prop to userspace.
> +	 */
> +	int panel_orientation;
> +
>  	/**
>  	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
>  	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
> @@ -1019,6 +1028,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
>  					    const struct edid *edid);
>  void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
>  						 uint64_t link_status);
> +int drm_connector_init_panel_orientation_property(
> +	struct drm_connector *connector, int width, int height);
>  
>  /**
>   * struct drm_tile_group - Tile group metadata
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index 0b4ac2ebc610..7d4ee1726e0a 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -728,6 +728,13 @@ struct drm_mode_config {
>  	 */
>  	struct drm_property *suggested_y_property;
>  
> +	/**
> +	 * @panel_orientation_property: Optional connector property indicating
> +	 * how the lcd-panel is mounted inside the casing (e.g. normal or
> +	 * upside-down).
> +	 */
> +	struct drm_property *panel_orientation_property;
> +
>  	/* dumb ioctl parameters */
>  	uint32_t preferred_depth, prefer_shadow;
>  
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index 34b6bb34b002..f60fae67bc1f 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -127,6 +127,13 @@ extern "C" {
>  #define DRM_MODE_LINK_STATUS_GOOD	0
>  #define DRM_MODE_LINK_STATUS_BAD	1
>  
> +/* Panel Orientation options */
> +#define DRM_MODE_PANEL_ORIENTATION_UNKNOWN	-1
> +#define DRM_MODE_PANEL_ORIENTATION_NORMAL	0
> +#define DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP	1
> +#define DRM_MODE_PANEL_ORIENTATION_LEFT_UP	2
> +#define DRM_MODE_PANEL_ORIENTATION_RIGHT_UP	3

Ugh, pls don't put enum properties into the uapi header. Userspace is
supposed to look at the strings, not the numbers. We've already screwed
this up a few times.

That also means an enum, with kerneldoc, would be more suitable. Please
put it into drm_connector.h.

Except for that minor thing looks all good. With the uapi cleanup up as
desribed above:

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>


> +
>  /*
>   * DRM_MODE_ROTATE_<degrees>
>   *
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [PATCH v5 3/7] drm: Add support for a panel-orientation connector property

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:24PM +0100, Hans de Goede wrote:
> On some devices the LCD panel is mounted in the casing in such a way that
> the up/top side of the panel does not match with the top side of the
> device (e.g. it is mounted upside-down).
> 
> This commit adds the necessary infra for lcd-panel drm_connector-s to
> have a "panel orientation" property to communicate how the panel is
> orientated vs the casing.
> 
> Userspace can use this property to check for non-normal orientation and
> then adjust the displayed image accordingly by rotating it to compensate.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---

btw in drm we'd like to record the per-patch changelog, pls put them above
the ---. I know everyone's different, it's silly.

> Changes in v2:
> -Rebased on 4.14-rc1
> -Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
>  access it easily
> -Have a single drm_connector_init_panel_orientation_property rather then
>  create and attach functions. The caller is expected to set
>  drm_display_info.panel_orientation before calling this, then this will
>  check for platform specific quirks overriding the panel_orientation and if
>  the panel_orientation is set after this then it will attach the property.
> ---
>  drivers/gpu/drm/Kconfig         |  1 +
>  drivers/gpu/drm/drm_connector.c | 73 +++++++++++++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h     | 11 +++++++
>  include/drm/drm_mode_config.h   |  7 ++++
>  include/uapi/drm/drm_mode.h     |  7 ++++
>  5 files changed, 99 insertions(+)
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 9d005ac98c2b..0b166e626eb6 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -7,6 +7,7 @@
>  menuconfig DRM
>  	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
>  	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
> +	select DRM_PANEL_ORIENTATION_QUIRKS
>  	select HDMI
>  	select FB_CMDLINE
>  	select I2C
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 704fc8934616..129c83a84320 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -24,6 +24,7 @@
>  #include <drm/drm_connector.h>
>  #include <drm/drm_edid.h>
>  #include <drm/drm_encoder.h>
> +#include <drm/drm_utils.h>
>  
>  #include "drm_crtc_internal.h"
>  #include "drm_internal.h"
> @@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
>  	mutex_init(&connector->mutex);
>  	connector->edid_blob_ptr = NULL;
>  	connector->status = connector_status_unknown;
> +	connector->display_info.panel_orientation =
> +		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
>  
>  	drm_connector_get_cmdline_mode(connector);
>  
> @@ -664,6 +667,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
>  	{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
>  };
>  
> +static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
> +	{ DRM_MODE_PANEL_ORIENTATION_NORMAL,	"Normal"	},
> +	{ DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,	"Upside Down"	},
> +	{ DRM_MODE_PANEL_ORIENTATION_LEFT_UP,	"Left Side Up"	},
> +	{ DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,	"Right Side Up"	},
> +};
> +
>  static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
>  	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
>  	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
> @@ -768,6 +778,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
>   *
>   * CRTC_ID:
>   * 	Mode object ID of the &drm_crtc this connector should be connected to.
> + *
> + * Connectors for LCD panels may also have one standardized property:
> + *
> + * panel orientation:
> + *	On some devices the LCD panel is mounted in the casing in such a way
> + *	that the up/top side of the panel does not match with the top side of
> + *	the device. Userspace can use this property to check for this.
> + *	Note that input coordinates from touchscreens (input devices with
> + *	INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
> + *	coordinates, so if userspace rotates the picture to adjust for
> + *	the orientation it must also apply the same transformation to the
> + *	touchscreen input coordinates.
>   */
>  
>  int drm_connector_create_standard_properties(struct drm_device *dev)
> @@ -1234,6 +1256,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
>  }
>  EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
>  
> +/**
> + * drm_connector_init_panel_orientation_property -
> + *	initialize the connecters panel_orientation property
> + * @connector: connector for which to init the panel-orientation property.
> + * @width: width in pixels of the panel, used for panel quirk detection
> + * @height: height in pixels of the panel, used for panel quirk detection
> + *
> + * This function should only be called for built-in panels, after setting
> + * connector->display_info.panel_orientation first (if known).
> + *
> + * This function will check for platform specific (e.g. DMI based) quirks
> + * overriding display_info.panel_orientation first, then if panel_orientation
> + * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
> + * "panel orientation" property to the connector.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_init_panel_orientation_property(
> +	struct drm_connector *connector, int width, int height)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct drm_display_info *info = &connector->display_info;
> +	struct drm_property *prop;
> +	int orientation_quirk;
> +
> +	orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> +	if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		info->panel_orientation = orientation_quirk;
> +
> +	if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> +		return 0;
> +
> +	prop = dev->mode_config.panel_orientation_property;
> +	if (!prop) {
> +		prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> +				"panel orientation",
> +				drm_panel_orientation_enum_list,
> +				ARRAY_SIZE(drm_panel_orientation_enum_list));
> +		if (!prop)
> +			return -ENOMEM;
> +
> +		dev->mode_config.panel_orientation_property = prop;
> +	}
> +
> +	drm_object_attach_property(&connector->base, prop,
> +				   info->panel_orientation);
> +	return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +
>  int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
>  				    struct drm_property *property,
>  				    uint64_t value)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index b4285c40e1e4..e6883065a461 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -222,6 +222,15 @@ struct drm_display_info {
>  #define DRM_COLOR_FORMAT_YCRCB422	(1<<2)
>  #define DRM_COLOR_FORMAT_YCRCB420	(1<<3)
>  
> +	/**
> +	 * @panel_orientation: Read only connector property for built-in panels,
> +	 * indicating the orientation of the panel vs the device's casing.
> +	 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
> +	 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
> +	 * fb to compensate and gets exported as prop to userspace.
> +	 */
> +	int panel_orientation;
> +
>  	/**
>  	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
>  	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
> @@ -1019,6 +1028,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
>  					    const struct edid *edid);
>  void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
>  						 uint64_t link_status);
> +int drm_connector_init_panel_orientation_property(
> +	struct drm_connector *connector, int width, int height);
>  
>  /**
>   * struct drm_tile_group - Tile group metadata
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index 0b4ac2ebc610..7d4ee1726e0a 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -728,6 +728,13 @@ struct drm_mode_config {
>  	 */
>  	struct drm_property *suggested_y_property;
>  
> +	/**
> +	 * @panel_orientation_property: Optional connector property indicating
> +	 * how the lcd-panel is mounted inside the casing (e.g. normal or
> +	 * upside-down).
> +	 */
> +	struct drm_property *panel_orientation_property;
> +
>  	/* dumb ioctl parameters */
>  	uint32_t preferred_depth, prefer_shadow;
>  
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index 34b6bb34b002..f60fae67bc1f 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -127,6 +127,13 @@ extern "C" {
>  #define DRM_MODE_LINK_STATUS_GOOD	0
>  #define DRM_MODE_LINK_STATUS_BAD	1
>  
> +/* Panel Orientation options */
> +#define DRM_MODE_PANEL_ORIENTATION_UNKNOWN	-1
> +#define DRM_MODE_PANEL_ORIENTATION_NORMAL	0
> +#define DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP	1
> +#define DRM_MODE_PANEL_ORIENTATION_LEFT_UP	2
> +#define DRM_MODE_PANEL_ORIENTATION_RIGHT_UP	3

Ugh, pls don't put enum properties into the uapi header. Userspace is
supposed to look at the strings, not the numbers. We've already screwed
this up a few times.

That also means an enum, with kerneldoc, would be more suitable. Please
put it into drm_connector.h.

Except for that minor thing looks all good. With the uapi cleanup up as
desribed above:

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>


> +
>  /*
>   * DRM_MODE_ROTATE_<degrees>
>   *
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v5 4/7] drm/fb-helper: Apply panel orientation connector prop to the primary

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:25PM +0100, Hans de Goede wrote:
> Apply the "panel orientation" drm connector prop to the primary plane so
> that fbcon and fbdev using userspace programs display the right way up.
> 
> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id”894
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -New patch in v2 of this patch-set
> 
> Changes in v3:
> -Use a rotation member in struct drm_fb_helper_crtc and set that from
>  drm_setup_crtcs instead of looping over all crtc's to find the right one
>  later
> -Since we now no longer look at rotation quirks directly in the fbcon
>  code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright
>  and we cannot use hardware rotation
> 
> Changes in v4:
> -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to
>  DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the
>  plane_state's rotation to an invalid value for disabled crtcs
>  (caught by Fi.CI)
> 
> Changes in v5:
> -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180,
>  90 / 270 degree rotation requires special handling which we lack atm
> -Add a TODO comment for 90 / 270 degree hardware rotation
> -Add some comments to better document the default case when mapping
>  sw_rotations to fbcon_rotate_hints

Yeah the above stuff really needs to be in the commit message. Or you need
to explain in prose, but just copying the changelog is easier.

People forgetting to update the patch justification is the no1 reason we
want to record the changelogs ...

Otherwise lgtm

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> ---
>  drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++-
>  include/drm/drm_fb_helper.h     |  8 ++++
>  2 files changed, 96 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index 116d1f1337c7..5a557488bff4 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -41,6 +41,7 @@
>  #include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
>  
> +#include "drm_crtc_internal.h"
>  #include "drm_crtc_helper_internal.h"
>  
>  static bool drm_fbdev_emulation = true;
> @@ -350,6 +351,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave);
>  static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
>  {
>  	struct drm_device *dev = fb_helper->dev;
> +	struct drm_plane_state *plane_state;
>  	struct drm_plane *plane;
>  	struct drm_atomic_state *state;
>  	int i, ret;
> @@ -368,8 +370,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
>  retry:
>  	plane_mask = 0;
>  	drm_for_each_plane(plane, dev) {
> -		struct drm_plane_state *plane_state;
> -
>  		plane_state = drm_atomic_get_plane_state(state, plane);
>  		if (IS_ERR(plane_state)) {
>  			ret = PTR_ERR(plane_state);
> @@ -392,6 +392,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
>  
>  	for (i = 0; i < fb_helper->crtc_count; i++) {
>  		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
> +		struct drm_plane *primary = mode_set->crtc->primary;
> +
> +		/* Cannot fail as we've already gotten the plane state above */
> +		plane_state = drm_atomic_get_new_plane_state(state, primary);
> +		plane_state->rotation = fb_helper->crtc_info[i].rotation;
>  
>  		ret = __drm_atomic_helper_set_config(mode_set, state);
>  		if (ret != 0)
> @@ -821,6 +826,7 @@ int drm_fb_helper_init(struct drm_device *dev,
>  		if (!fb_helper->crtc_info[i].mode_set.connectors)
>  			goto out_free;
>  		fb_helper->crtc_info[i].mode_set.num_connectors = 0;
> +		fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
>  	}
>  
>  	i = 0;
> @@ -2334,6 +2340,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
>  	return best_score;
>  }
>  
> +/*
> + * This function checks if rotation is necessary because of panel orientation
> + * and if it is, if it is supported.
> + * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
> + * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
> + * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
> + * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
> + * the unsupported rotation.
> + */
> +static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
> +				    struct drm_fb_helper_crtc *fb_crtc,
> +				    struct drm_connector *connector)
> +{
> +	struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
> +	uint64_t valid_mask = 0;
> +	int i, rotation;
> +
> +	fb_crtc->rotation = DRM_MODE_ROTATE_0;
> +
> +	switch (connector->display_info.panel_orientation) {
> +	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
> +		rotation = DRM_MODE_ROTATE_180;
> +		break;
> +	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
> +		rotation = DRM_MODE_ROTATE_90;
> +		break;
> +	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
> +		rotation = DRM_MODE_ROTATE_270;
> +		break;
> +	default:
> +		rotation = DRM_MODE_ROTATE_0;
> +	}
> +
> +	/*
> +	 * TODO: support 90 / 270 degree hardware rotation,
> +	 * depending on the hardware this may require the framebuffer
> +	 * to be in a specific tiling format.
> +	 */
> +	if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
> +		fb_helper->sw_rotations |= rotation;
> +		return;
> +	}
> +
> +	for (i = 0; i < plane->rotation_property->num_values; i++)
> +		valid_mask |= (1ULL << plane->rotation_property->values[i]);
> +
> +	if (!(rotation & valid_mask)) {
> +		fb_helper->sw_rotations |= rotation;
> +		return;
> +	}
> +
> +	fb_crtc->rotation = rotation;
> +	/* Rotating in hardware, fbcon should not rotate */
> +	fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
> +}
> +
>  static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  			    u32 width, u32 height)
>  {
> @@ -2393,6 +2455,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  		drm_fb_helper_modeset_release(fb_helper,
>  					      &fb_helper->crtc_info[i].mode_set);
>  
> +	fb_helper->sw_rotations = 0;
>  	drm_fb_helper_for_each_connector(fb_helper, i) {
>  		struct drm_display_mode *mode = modes[i];
>  		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
> @@ -2412,6 +2475,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  			modeset->mode = drm_mode_duplicate(dev,
>  							   fb_crtc->desired_mode);
>  			drm_connector_get(connector);
> +			drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
>  			modeset->connectors[modeset->num_connectors++] = connector;
>  			modeset->x = offset->x;
>  			modeset->y = offset->y;
> @@ -2453,6 +2517,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
>  		}
>  	}
>  	mutex_unlock(&fb_helper->dev->mode_config.mutex);
> +
> +	switch (fb_helper->sw_rotations) {
> +	case DRM_MODE_ROTATE_0:
> +		info->fbcon_rotate_hint = FB_ROTATE_UR;
> +		break;
> +	case DRM_MODE_ROTATE_90:
> +		info->fbcon_rotate_hint = FB_ROTATE_CCW;
> +		break;
> +	case DRM_MODE_ROTATE_180:
> +		info->fbcon_rotate_hint = FB_ROTATE_UD;
> +		break;
> +	case DRM_MODE_ROTATE_270:
> +		info->fbcon_rotate_hint = FB_ROTATE_CW;
> +		break;
> +	default:
> +		/*
> +		 * Multiple bits are set / multiple rotations requested
> +		 * fbcon cannot handle separate rotation settings per
> +		 * output, so fallback to unrotated.
> +		 */
> +		info->fbcon_rotate_hint = FB_ROTATE_UR;
> +	}
>  }
>  
>  /* Note: Drops fb_helper->lock before returning. */
> diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
> index 33fe95927742..7fca941c2c57 100644
> --- a/include/drm/drm_fb_helper.h
> +++ b/include/drm/drm_fb_helper.h
> @@ -48,6 +48,7 @@ struct drm_fb_helper_crtc {
>  	struct drm_mode_set mode_set;
>  	struct drm_display_mode *desired_mode;
>  	int x, y;
> +	int rotation;
>  };
>  
>  /**
> @@ -158,6 +159,13 @@ struct drm_fb_helper {
>  	struct drm_fb_helper_crtc *crtc_info;
>  	int connector_count;
>  	int connector_info_alloc_count;
> +	/**
> +	 * @rotations:
> +	 * Bitmask of all rotations requested for panel-orientation which
> +	 * could not be handled in hardware. If only one bit is set
> +	 * fbdev->fbcon_rotate_hint gets set to the requested rotation.
> +	 */
> +	int sw_rotations;
>  	/**
>  	 * @connector_info:
>  	 *
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [PATCH v5 4/7] drm/fb-helper: Apply panel orientation connector prop to the primary plane

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:25PM +0100, Hans de Goede wrote:
> Apply the "panel orientation" drm connector prop to the primary plane so
> that fbcon and fbdev using userspace programs display the right way up.
> 
> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -New patch in v2 of this patch-set
> 
> Changes in v3:
> -Use a rotation member in struct drm_fb_helper_crtc and set that from
>  drm_setup_crtcs instead of looping over all crtc's to find the right one
>  later
> -Since we now no longer look at rotation quirks directly in the fbcon
>  code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright
>  and we cannot use hardware rotation
> 
> Changes in v4:
> -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to
>  DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the
>  plane_state's rotation to an invalid value for disabled crtcs
>  (caught by Fi.CI)
> 
> Changes in v5:
> -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180,
>  90 / 270 degree rotation requires special handling which we lack atm
> -Add a TODO comment for 90 / 270 degree hardware rotation
> -Add some comments to better document the default case when mapping
>  sw_rotations to fbcon_rotate_hints

Yeah the above stuff really needs to be in the commit message. Or you need
to explain in prose, but just copying the changelog is easier.

People forgetting to update the patch justification is the no1 reason we
want to record the changelogs ...

Otherwise lgtm

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> ---
>  drivers/gpu/drm/drm_fb_helper.c | 90 ++++++++++++++++++++++++++++++++++++++++-
>  include/drm/drm_fb_helper.h     |  8 ++++
>  2 files changed, 96 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
> index 116d1f1337c7..5a557488bff4 100644
> --- a/drivers/gpu/drm/drm_fb_helper.c
> +++ b/drivers/gpu/drm/drm_fb_helper.c
> @@ -41,6 +41,7 @@
>  #include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
>  
> +#include "drm_crtc_internal.h"
>  #include "drm_crtc_helper_internal.h"
>  
>  static bool drm_fbdev_emulation = true;
> @@ -350,6 +351,7 @@ EXPORT_SYMBOL(drm_fb_helper_debug_leave);
>  static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool active)
>  {
>  	struct drm_device *dev = fb_helper->dev;
> +	struct drm_plane_state *plane_state;
>  	struct drm_plane *plane;
>  	struct drm_atomic_state *state;
>  	int i, ret;
> @@ -368,8 +370,6 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
>  retry:
>  	plane_mask = 0;
>  	drm_for_each_plane(plane, dev) {
> -		struct drm_plane_state *plane_state;
> -
>  		plane_state = drm_atomic_get_plane_state(state, plane);
>  		if (IS_ERR(plane_state)) {
>  			ret = PTR_ERR(plane_state);
> @@ -392,6 +392,11 @@ static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper, bool activ
>  
>  	for (i = 0; i < fb_helper->crtc_count; i++) {
>  		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
> +		struct drm_plane *primary = mode_set->crtc->primary;
> +
> +		/* Cannot fail as we've already gotten the plane state above */
> +		plane_state = drm_atomic_get_new_plane_state(state, primary);
> +		plane_state->rotation = fb_helper->crtc_info[i].rotation;
>  
>  		ret = __drm_atomic_helper_set_config(mode_set, state);
>  		if (ret != 0)
> @@ -821,6 +826,7 @@ int drm_fb_helper_init(struct drm_device *dev,
>  		if (!fb_helper->crtc_info[i].mode_set.connectors)
>  			goto out_free;
>  		fb_helper->crtc_info[i].mode_set.num_connectors = 0;
> +		fb_helper->crtc_info[i].rotation = DRM_MODE_ROTATE_0;
>  	}
>  
>  	i = 0;
> @@ -2334,6 +2340,62 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
>  	return best_score;
>  }
>  
> +/*
> + * This function checks if rotation is necessary because of panel orientation
> + * and if it is, if it is supported.
> + * If rotation is necessary and supported, its gets set in fb_crtc.rotation.
> + * If rotation is necessary but not supported, a DRM_MODE_ROTATE_* flag gets
> + * or-ed into fb_helper->sw_rotations. In drm_setup_crtcs_fb() we check if only
> + * one bit is set and then we set fb_info.fbcon_rotate_hint to make fbcon do
> + * the unsupported rotation.
> + */
> +static void drm_setup_crtc_rotation(struct drm_fb_helper *fb_helper,
> +				    struct drm_fb_helper_crtc *fb_crtc,
> +				    struct drm_connector *connector)
> +{
> +	struct drm_plane *plane = fb_crtc->mode_set.crtc->primary;
> +	uint64_t valid_mask = 0;
> +	int i, rotation;
> +
> +	fb_crtc->rotation = DRM_MODE_ROTATE_0;
> +
> +	switch (connector->display_info.panel_orientation) {
> +	case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
> +		rotation = DRM_MODE_ROTATE_180;
> +		break;
> +	case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
> +		rotation = DRM_MODE_ROTATE_90;
> +		break;
> +	case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
> +		rotation = DRM_MODE_ROTATE_270;
> +		break;
> +	default:
> +		rotation = DRM_MODE_ROTATE_0;
> +	}
> +
> +	/*
> +	 * TODO: support 90 / 270 degree hardware rotation,
> +	 * depending on the hardware this may require the framebuffer
> +	 * to be in a specific tiling format.
> +	 */
> +	if (rotation != DRM_MODE_ROTATE_180 || !plane->rotation_property) {
> +		fb_helper->sw_rotations |= rotation;
> +		return;
> +	}
> +
> +	for (i = 0; i < plane->rotation_property->num_values; i++)
> +		valid_mask |= (1ULL << plane->rotation_property->values[i]);
> +
> +	if (!(rotation & valid_mask)) {
> +		fb_helper->sw_rotations |= rotation;
> +		return;
> +	}
> +
> +	fb_crtc->rotation = rotation;
> +	/* Rotating in hardware, fbcon should not rotate */
> +	fb_helper->sw_rotations |= DRM_MODE_ROTATE_0;
> +}
> +
>  static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  			    u32 width, u32 height)
>  {
> @@ -2393,6 +2455,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  		drm_fb_helper_modeset_release(fb_helper,
>  					      &fb_helper->crtc_info[i].mode_set);
>  
> +	fb_helper->sw_rotations = 0;
>  	drm_fb_helper_for_each_connector(fb_helper, i) {
>  		struct drm_display_mode *mode = modes[i];
>  		struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
> @@ -2412,6 +2475,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
>  			modeset->mode = drm_mode_duplicate(dev,
>  							   fb_crtc->desired_mode);
>  			drm_connector_get(connector);
> +			drm_setup_crtc_rotation(fb_helper, fb_crtc, connector);
>  			modeset->connectors[modeset->num_connectors++] = connector;
>  			modeset->x = offset->x;
>  			modeset->y = offset->y;
> @@ -2453,6 +2517,28 @@ static void drm_setup_crtcs_fb(struct drm_fb_helper *fb_helper)
>  		}
>  	}
>  	mutex_unlock(&fb_helper->dev->mode_config.mutex);
> +
> +	switch (fb_helper->sw_rotations) {
> +	case DRM_MODE_ROTATE_0:
> +		info->fbcon_rotate_hint = FB_ROTATE_UR;
> +		break;
> +	case DRM_MODE_ROTATE_90:
> +		info->fbcon_rotate_hint = FB_ROTATE_CCW;
> +		break;
> +	case DRM_MODE_ROTATE_180:
> +		info->fbcon_rotate_hint = FB_ROTATE_UD;
> +		break;
> +	case DRM_MODE_ROTATE_270:
> +		info->fbcon_rotate_hint = FB_ROTATE_CW;
> +		break;
> +	default:
> +		/*
> +		 * Multiple bits are set / multiple rotations requested
> +		 * fbcon cannot handle separate rotation settings per
> +		 * output, so fallback to unrotated.
> +		 */
> +		info->fbcon_rotate_hint = FB_ROTATE_UR;
> +	}
>  }
>  
>  /* Note: Drops fb_helper->lock before returning. */
> diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
> index 33fe95927742..7fca941c2c57 100644
> --- a/include/drm/drm_fb_helper.h
> +++ b/include/drm/drm_fb_helper.h
> @@ -48,6 +48,7 @@ struct drm_fb_helper_crtc {
>  	struct drm_mode_set mode_set;
>  	struct drm_display_mode *desired_mode;
>  	int x, y;
> +	int rotation;
>  };
>  
>  /**
> @@ -158,6 +159,13 @@ struct drm_fb_helper {
>  	struct drm_fb_helper_crtc *crtc_info;
>  	int connector_count;
>  	int connector_info_alloc_count;
> +	/**
> +	 * @rotations:
> +	 * Bitmask of all rotations requested for panel-orientation which
> +	 * could not be handled in hardware. If only one bit is set
> +	 * fbdev->fbcon_rotate_hint gets set to the requested rotation.
> +	 */
> +	int sw_rotations;
>  	/**
>  	 * @connector_info:
>  	 *
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v5 5/7] drm/i915: Add "panel orientation" property to the panel connector

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:26PM +0100, Hans de Goede wrote:
> Ideally we could use the VBT for this, that would be simple, in
> intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
> connector->display_info.panel_orientation accordingly and call
> drm_connector_init_panel_orientation_property(), done.
> 
> Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
> with an upside down LCD and where the GOP is properly rotating the
> EFI fb in hardware.
> 
> So instead we end up reading the rotation from the primary plane.
> To read the info from the primary plane, we need to know which crtc
> the panel is hooked up to, so we do this the first time the panel
> encoder's get_config function get called, as by then the encoder
> crtc routing has been set up.
> 
> This commit only implements the panel orientation property for DSI
> panels on BYT / CHT / BXT hardware, as all known non normal oriented
> panels are only found on this hardware.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Read back the rotation applied by the GOP from the primary plane
>  instead of relying on dev_priv->vbt.dsi.config->rotation, because it
>  seems that the VBT rotation filed is always 0 even on devices where the
>  GOP does apply a rotation
> 
> Changes in v3:
> -Rewrite the code to read back the orientation from the primary
>  plane to contain all of this in intel_dsi.c instead of poking a bunch
>  of holes between all the different layers
> ---
>  drivers/gpu/drm/i915/intel_drv.h   |  1 +
>  drivers/gpu/drm/i915/intel_dsi.c   | 48 ++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_dsi.h   |  2 ++
>  drivers/gpu/drm/i915/intel_panel.c | 16 +++++++++++++
>  4 files changed, 67 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 47d022d48718..11efc6cb74c8 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1727,6 +1727,7 @@ void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state,
>  				  const struct drm_connector_state *conn_state);
>  void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state);
>  void intel_panel_destroy_backlight(struct drm_connector *connector);
> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation);
>  enum drm_connector_status intel_panel_detect(struct drm_i915_private *dev_priv);
>  extern struct drm_display_mode *intel_find_panel_downclock(
>  				struct drm_i915_private *dev_priv,
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 83f15848098a..3e2f12db8d15 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -1084,13 +1084,16 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>  	struct drm_display_mode *adjusted_mode_sw;
>  	struct intel_crtc *intel_crtc;
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
>  	unsigned int lane_count = intel_dsi->lane_count;
>  	unsigned int bpp, fmt;
> +	int orientation;
>  	enum port port;
>  	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
>  	u16 hfp_sw, hsync_sw, hbp_sw;
>  	u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
>  				crtc_hblank_start_sw, crtc_hblank_end_sw;
> +	u32 val;
>  
>  	/* FIXME: hw readout should not depend on SW state */
>  	intel_crtc = to_intel_crtc(encoder->base.crtc);
> @@ -1234,6 +1237,49 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->crtc_hblank_end = crtc_hblank_end_sw)
>  		adjusted_mode->crtc_hblank_end >  					adjusted_mode_sw->crtc_hblank_end;
> +
> +	if (!intel_dsi->got_panel_orientation) {
> +		val = I915_READ(PLANE_CTL(intel_crtc->pipe, 0));
> +		/* The rotation is used to correct for the panel orientation */
> +		switch (val & PLANE_CTL_ROTATE_MASK) {
> +		case PLANE_CTL_ROTATE_0:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +			break;
> +		case PLANE_CTL_ROTATE_90:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
> +			break;
> +		case PLANE_CTL_ROTATE_180:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +			break;
> +		case PLANE_CTL_ROTATE_270:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
> +			break;
> +		}
> +		intel_panel_set_orientation(panel, orientation);
> +		intel_dsi->got_panel_orientation = true;
> +	}
> +}
> +
> +static void vlv_dsi_get_pipe_config(struct intel_encoder *encoder)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
> +	int orientation;
> +	u32 val;
> +
> +	if (!intel_dsi->got_panel_orientation) {
> +		val = I915_READ(DSPCNTR(intel_crtc->plane));
> +
> +		if (val & DISPPLANE_ROTATE_180)
> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +		else
> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +
> +		intel_panel_set_orientation(panel, orientation);
> +		intel_dsi->got_panel_orientation = true;
> +	}
>  }
>  
>  static void intel_dsi_get_config(struct intel_encoder *encoder,
> @@ -1245,6 +1291,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
>  
>  	if (IS_GEN9_LP(dev_priv))
>  		bxt_dsi_get_pipe_config(encoder, pipe_config);
> +	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> +		vlv_dsi_get_pipe_config(encoder);

get_config gets called all the time, this feels like the wrong place for
this. I assume you want this somewhere at init time? We also don't have
funny hacks for the fixed_mode readout in intel_lvds.c.

Also I'd kinda assume you'd only do this as a fallback, for when the quirk
table doesn't have an entry?
-Daniel

>  
>  	pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp,
>  				  pipe_config);
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 7afeb9580f41..92c2fe31f3fd 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -52,6 +52,8 @@ struct intel_dsi {
>  	/* if true, use HS mode, otherwise LP */
>  	bool hs;
>  
> +	bool got_panel_orientation;
> +
>  	/* virtual channel */
>  	int channel;
>  
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index adc51e452e3e..7d571bef847e 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -1842,6 +1842,22 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
>  	panel->backlight.present = false;
>  }
>  
> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation)
> +{
> +	struct intel_connector *panel_conn;
> +	int width = 0, height = 0;
> +
> +	if (panel->fixed_mode) {
> +		width = panel->fixed_mode->hdisplay;
> +		height = panel->fixed_mode->vdisplay;
> +	}
> +
> +	panel_conn = container_of(panel, struct intel_connector, panel);
> +	panel_conn->base.display_info.panel_orientation = orientation;
> +	drm_connector_init_panel_orientation_property(&panel_conn->base,
> +						      width, height);
> +}
> +
>  /* Set up chip specific backlight functions */
>  static void
>  intel_panel_init_backlight_funcs(struct intel_panel *panel)
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Re: [PATCH v5 5/7] drm/i915: Add "panel orientation" property to the panel connector

[Daniel Vetter]

On Sat, Nov 04, 2017 at 03:08:26PM +0100, Hans de Goede wrote:
> Ideally we could use the VBT for this, that would be simple, in
> intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
> connector->display_info.panel_orientation accordingly and call
> drm_connector_init_panel_orientation_property(), done.
> 
> Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
> with an upside down LCD and where the GOP is properly rotating the
> EFI fb in hardware.
> 
> So instead we end up reading the rotation from the primary plane.
> To read the info from the primary plane, we need to know which crtc
> the panel is hooked up to, so we do this the first time the panel
> encoder's get_config function get called, as by then the encoder
> crtc routing has been set up.
> 
> This commit only implements the panel orientation property for DSI
> panels on BYT / CHT / BXT hardware, as all known non normal oriented
> panels are only found on this hardware.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Read back the rotation applied by the GOP from the primary plane
>  instead of relying on dev_priv->vbt.dsi.config->rotation, because it
>  seems that the VBT rotation filed is always 0 even on devices where the
>  GOP does apply a rotation
> 
> Changes in v3:
> -Rewrite the code to read back the orientation from the primary
>  plane to contain all of this in intel_dsi.c instead of poking a bunch
>  of holes between all the different layers
> ---
>  drivers/gpu/drm/i915/intel_drv.h   |  1 +
>  drivers/gpu/drm/i915/intel_dsi.c   | 48 ++++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_dsi.h   |  2 ++
>  drivers/gpu/drm/i915/intel_panel.c | 16 +++++++++++++
>  4 files changed, 67 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 47d022d48718..11efc6cb74c8 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1727,6 +1727,7 @@ void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state,
>  				  const struct drm_connector_state *conn_state);
>  void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state);
>  void intel_panel_destroy_backlight(struct drm_connector *connector);
> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation);
>  enum drm_connector_status intel_panel_detect(struct drm_i915_private *dev_priv);
>  extern struct drm_display_mode *intel_find_panel_downclock(
>  				struct drm_i915_private *dev_priv,
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 83f15848098a..3e2f12db8d15 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -1084,13 +1084,16 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>  	struct drm_display_mode *adjusted_mode_sw;
>  	struct intel_crtc *intel_crtc;
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
>  	unsigned int lane_count = intel_dsi->lane_count;
>  	unsigned int bpp, fmt;
> +	int orientation;
>  	enum port port;
>  	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
>  	u16 hfp_sw, hsync_sw, hbp_sw;
>  	u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
>  				crtc_hblank_start_sw, crtc_hblank_end_sw;
> +	u32 val;
>  
>  	/* FIXME: hw readout should not depend on SW state */
>  	intel_crtc = to_intel_crtc(encoder->base.crtc);
> @@ -1234,6 +1237,49 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
>  		adjusted_mode->crtc_hblank_end =
>  					adjusted_mode_sw->crtc_hblank_end;
> +
> +	if (!intel_dsi->got_panel_orientation) {
> +		val = I915_READ(PLANE_CTL(intel_crtc->pipe, 0));
> +		/* The rotation is used to correct for the panel orientation */
> +		switch (val & PLANE_CTL_ROTATE_MASK) {
> +		case PLANE_CTL_ROTATE_0:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +			break;
> +		case PLANE_CTL_ROTATE_90:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
> +			break;
> +		case PLANE_CTL_ROTATE_180:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +			break;
> +		case PLANE_CTL_ROTATE_270:
> +			orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
> +			break;
> +		}
> +		intel_panel_set_orientation(panel, orientation);
> +		intel_dsi->got_panel_orientation = true;
> +	}
> +}
> +
> +static void vlv_dsi_get_pipe_config(struct intel_encoder *encoder)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
> +	int orientation;
> +	u32 val;
> +
> +	if (!intel_dsi->got_panel_orientation) {
> +		val = I915_READ(DSPCNTR(intel_crtc->plane));
> +
> +		if (val & DISPPLANE_ROTATE_180)
> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
> +		else
> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
> +
> +		intel_panel_set_orientation(panel, orientation);
> +		intel_dsi->got_panel_orientation = true;
> +	}
>  }
>  
>  static void intel_dsi_get_config(struct intel_encoder *encoder,
> @@ -1245,6 +1291,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
>  
>  	if (IS_GEN9_LP(dev_priv))
>  		bxt_dsi_get_pipe_config(encoder, pipe_config);
> +	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> +		vlv_dsi_get_pipe_config(encoder);

get_config gets called all the time, this feels like the wrong place for
this. I assume you want this somewhere at init time? We also don't have
funny hacks for the fixed_mode readout in intel_lvds.c.

Also I'd kinda assume you'd only do this as a fallback, for when the quirk
table doesn't have an entry?
-Daniel

>  
>  	pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp,
>  				  pipe_config);
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 7afeb9580f41..92c2fe31f3fd 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -52,6 +52,8 @@ struct intel_dsi {
>  	/* if true, use HS mode, otherwise LP */
>  	bool hs;
>  
> +	bool got_panel_orientation;
> +
>  	/* virtual channel */
>  	int channel;
>  
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index adc51e452e3e..7d571bef847e 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -1842,6 +1842,22 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
>  	panel->backlight.present = false;
>  }
>  
> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation)
> +{
> +	struct intel_connector *panel_conn;
> +	int width = 0, height = 0;
> +
> +	if (panel->fixed_mode) {
> +		width = panel->fixed_mode->hdisplay;
> +		height = panel->fixed_mode->vdisplay;
> +	}
> +
> +	panel_conn = container_of(panel, struct intel_connector, panel);
> +	panel_conn->base.display_info.panel_orientation = orientation;
> +	drm_connector_init_panel_orientation_property(&panel_conn->base,
> +						      width, height);
> +}
> +
>  /* Set up chip specific backlight functions */
>  static void
>  intel_panel_init_backlight_funcs(struct intel_panel *panel)
> -- 
> 2.14.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [PATCH v5 5/7] drm/i915: Add "panel orientation" property to the panel connector

[Hans de Goede]

Hi,

On 11/06/2017 11:17 AM, Daniel Vetter wrote:
> On Sat, Nov 04, 2017 at 03:08:26PM +0100, Hans de Goede wrote:
>> Ideally we could use the VBT for this, that would be simple, in
>> intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
>> connector->display_info.panel_orientation accordingly and call
>> drm_connector_init_panel_orientation_property(), done.
>>
>> Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
>> with an upside down LCD and where the GOP is properly rotating the
>> EFI fb in hardware.
>>
>> So instead we end up reading the rotation from the primary plane.
>> To read the info from the primary plane, we need to know which crtc
>> the panel is hooked up to, so we do this the first time the panel
>> encoder's get_config function get called, as by then the encoder
>> crtc routing has been set up.
>>
>> This commit only implements the panel orientation property for DSI
>> panels on BYT / CHT / BXT hardware, as all known non normal oriented
>> panels are only found on this hardware.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2:
>> -Read back the rotation applied by the GOP from the primary plane
>>   instead of relying on dev_priv->vbt.dsi.config->rotation, because it
>>   seems that the VBT rotation filed is always 0 even on devices where the
>>   GOP does apply a rotation
>>
>> Changes in v3:
>> -Rewrite the code to read back the orientation from the primary
>>   plane to contain all of this in intel_dsi.c instead of poking a bunch
>>   of holes between all the different layers
>> ---
>>   drivers/gpu/drm/i915/intel_drv.h   |  1 +
>>   drivers/gpu/drm/i915/intel_dsi.c   | 48 ++++++++++++++++++++++++++++++++++++++
>>   drivers/gpu/drm/i915/intel_dsi.h   |  2 ++
>>   drivers/gpu/drm/i915/intel_panel.c | 16 +++++++++++++
>>   4 files changed, 67 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index 47d022d48718..11efc6cb74c8 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -1727,6 +1727,7 @@ void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state,
>>   				  const struct drm_connector_state *conn_state);
>>   void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state);
>>   void intel_panel_destroy_backlight(struct drm_connector *connector);
>> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation);
>>   enum drm_connector_status intel_panel_detect(struct drm_i915_private *dev_priv);
>>   extern struct drm_display_mode *intel_find_panel_downclock(
>>   				struct drm_i915_private *dev_priv,
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
>> index 83f15848098a..3e2f12db8d15 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi.c
>> @@ -1084,13 +1084,16 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>>   	struct drm_display_mode *adjusted_mode_sw;
>>   	struct intel_crtc *intel_crtc;
>>   	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
>>   	unsigned int lane_count = intel_dsi->lane_count;
>>   	unsigned int bpp, fmt;
>> +	int orientation;
>>   	enum port port;
>>   	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
>>   	u16 hfp_sw, hsync_sw, hbp_sw;
>>   	u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
>>   				crtc_hblank_start_sw, crtc_hblank_end_sw;
>> +	u32 val;
>>   
>>   	/* FIXME: hw readout should not depend on SW state */
>>   	intel_crtc = to_intel_crtc(encoder->base.crtc);
>> @@ -1234,6 +1237,49 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>>   	if (adjusted_mode->crtc_hblank_end = crtc_hblank_end_sw)
>>   		adjusted_mode->crtc_hblank_end >>   					adjusted_mode_sw->crtc_hblank_end;
>> +
>> +	if (!intel_dsi->got_panel_orientation) {
>> +		val = I915_READ(PLANE_CTL(intel_crtc->pipe, 0));
>> +		/* The rotation is used to correct for the panel orientation */
>> +		switch (val & PLANE_CTL_ROTATE_MASK) {
>> +		case PLANE_CTL_ROTATE_0:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
>> +			break;
>> +		case PLANE_CTL_ROTATE_90:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
>> +			break;
>> +		case PLANE_CTL_ROTATE_180:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
>> +			break;
>> +		case PLANE_CTL_ROTATE_270:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
>> +			break;
>> +		}
>> +		intel_panel_set_orientation(panel, orientation);
>> +		intel_dsi->got_panel_orientation = true;
>> +	}
>> +}
>> +
>> +static void vlv_dsi_get_pipe_config(struct intel_encoder *encoder)
>> +{
>> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
>> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
>> +	int orientation;
>> +	u32 val;
>> +
>> +	if (!intel_dsi->got_panel_orientation) {
>> +		val = I915_READ(DSPCNTR(intel_crtc->plane));
>> +
>> +		if (val & DISPPLANE_ROTATE_180)
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
>> +		else
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
>> +
>> +		intel_panel_set_orientation(panel, orientation);
>> +		intel_dsi->got_panel_orientation = true;
>> +	}
>>   }
>>   
>>   static void intel_dsi_get_config(struct intel_encoder *encoder,
>> @@ -1245,6 +1291,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
>>   
>>   	if (IS_GEN9_LP(dev_priv))
>>   		bxt_dsi_get_pipe_config(encoder, pipe_config);
>> +	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>> +		vlv_dsi_get_pipe_config(encoder);
> 
> get_config gets called all the time, this feels like the wrong place for
> this. I assume you want this somewhere at init time? We also don't have
> funny hacks for the fixed_mode readout in intel_lvds.c.

So I've finally been able to make some time to look at this (and your other
review comments) I've changes this so that the hardware read-out happens
from intel_dsi_init(), mirroring the lvds fixed mode readout from
intel_lvds_init().

> Also I'd kinda assume you'd only do this as a fallback, for when the quirk
> table doesn't have an entry?

It is the otherway around, hardware readout is used to set an initial
value and then the quirk table gets checked for any matches which then
override the initial value. The end result is the same though :)

I hope to post a v6 of the patch-set with this and your other remarks
addressed this weekend.

Regards,

Hans






> -Daniel
> 
>>   
>>   	pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp,
>>   				  pipe_config);
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
>> index 7afeb9580f41..92c2fe31f3fd 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi.h
>> +++ b/drivers/gpu/drm/i915/intel_dsi.h
>> @@ -52,6 +52,8 @@ struct intel_dsi {
>>   	/* if true, use HS mode, otherwise LP */
>>   	bool hs;
>>   
>> +	bool got_panel_orientation;
>> +
>>   	/* virtual channel */
>>   	int channel;
>>   
>> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
>> index adc51e452e3e..7d571bef847e 100644
>> --- a/drivers/gpu/drm/i915/intel_panel.c
>> +++ b/drivers/gpu/drm/i915/intel_panel.c
>> @@ -1842,6 +1842,22 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
>>   	panel->backlight.present = false;
>>   }
>>   
>> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation)
>> +{
>> +	struct intel_connector *panel_conn;
>> +	int width = 0, height = 0;
>> +
>> +	if (panel->fixed_mode) {
>> +		width = panel->fixed_mode->hdisplay;
>> +		height = panel->fixed_mode->vdisplay;
>> +	}
>> +
>> +	panel_conn = container_of(panel, struct intel_connector, panel);
>> +	panel_conn->base.display_info.panel_orientation = orientation;
>> +	drm_connector_init_panel_orientation_property(&panel_conn->base,
>> +						      width, height);
>> +}
>> +
>>   /* Set up chip specific backlight functions */
>>   static void
>>   intel_panel_init_backlight_funcs(struct intel_panel *panel)
>> -- 
>> 2.14.3
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 

Re: [PATCH v5 5/7] drm/i915: Add "panel orientation" property to the panel connector

[Hans de Goede]

Hi,

On 11/06/2017 11:17 AM, Daniel Vetter wrote:
> On Sat, Nov 04, 2017 at 03:08:26PM +0100, Hans de Goede wrote:
>> Ideally we could use the VBT for this, that would be simple, in
>> intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set
>> connector->display_info.panel_orientation accordingly and call
>> drm_connector_init_panel_orientation_property(), done.
>>
>> Unfortunately vbt.dsi.config->rotation is always 0 even on tablets
>> with an upside down LCD and where the GOP is properly rotating the
>> EFI fb in hardware.
>>
>> So instead we end up reading the rotation from the primary plane.
>> To read the info from the primary plane, we need to know which crtc
>> the panel is hooked up to, so we do this the first time the panel
>> encoder's get_config function get called, as by then the encoder
>> crtc routing has been set up.
>>
>> This commit only implements the panel orientation property for DSI
>> panels on BYT / CHT / BXT hardware, as all known non normal oriented
>> panels are only found on this hardware.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2:
>> -Read back the rotation applied by the GOP from the primary plane
>>   instead of relying on dev_priv->vbt.dsi.config->rotation, because it
>>   seems that the VBT rotation filed is always 0 even on devices where the
>>   GOP does apply a rotation
>>
>> Changes in v3:
>> -Rewrite the code to read back the orientation from the primary
>>   plane to contain all of this in intel_dsi.c instead of poking a bunch
>>   of holes between all the different layers
>> ---
>>   drivers/gpu/drm/i915/intel_drv.h   |  1 +
>>   drivers/gpu/drm/i915/intel_dsi.c   | 48 ++++++++++++++++++++++++++++++++++++++
>>   drivers/gpu/drm/i915/intel_dsi.h   |  2 ++
>>   drivers/gpu/drm/i915/intel_panel.c | 16 +++++++++++++
>>   4 files changed, 67 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index 47d022d48718..11efc6cb74c8 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -1727,6 +1727,7 @@ void intel_panel_enable_backlight(const struct intel_crtc_state *crtc_state,
>>   				  const struct drm_connector_state *conn_state);
>>   void intel_panel_disable_backlight(const struct drm_connector_state *old_conn_state);
>>   void intel_panel_destroy_backlight(struct drm_connector *connector);
>> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation);
>>   enum drm_connector_status intel_panel_detect(struct drm_i915_private *dev_priv);
>>   extern struct drm_display_mode *intel_find_panel_downclock(
>>   				struct drm_i915_private *dev_priv,
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
>> index 83f15848098a..3e2f12db8d15 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi.c
>> @@ -1084,13 +1084,16 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>>   	struct drm_display_mode *adjusted_mode_sw;
>>   	struct intel_crtc *intel_crtc;
>>   	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
>>   	unsigned int lane_count = intel_dsi->lane_count;
>>   	unsigned int bpp, fmt;
>> +	int orientation;
>>   	enum port port;
>>   	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
>>   	u16 hfp_sw, hsync_sw, hbp_sw;
>>   	u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
>>   				crtc_hblank_start_sw, crtc_hblank_end_sw;
>> +	u32 val;
>>   
>>   	/* FIXME: hw readout should not depend on SW state */
>>   	intel_crtc = to_intel_crtc(encoder->base.crtc);
>> @@ -1234,6 +1237,49 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
>>   	if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
>>   		adjusted_mode->crtc_hblank_end =
>>   					adjusted_mode_sw->crtc_hblank_end;
>> +
>> +	if (!intel_dsi->got_panel_orientation) {
>> +		val = I915_READ(PLANE_CTL(intel_crtc->pipe, 0));
>> +		/* The rotation is used to correct for the panel orientation */
>> +		switch (val & PLANE_CTL_ROTATE_MASK) {
>> +		case PLANE_CTL_ROTATE_0:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
>> +			break;
>> +		case PLANE_CTL_ROTATE_90:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
>> +			break;
>> +		case PLANE_CTL_ROTATE_180:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
>> +			break;
>> +		case PLANE_CTL_ROTATE_270:
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
>> +			break;
>> +		}
>> +		intel_panel_set_orientation(panel, orientation);
>> +		intel_dsi->got_panel_orientation = true;
>> +	}
>> +}
>> +
>> +static void vlv_dsi_get_pipe_config(struct intel_encoder *encoder)
>> +{
>> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> +	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
>> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> +	struct intel_panel *panel = &intel_dsi->attached_connector->panel;
>> +	int orientation;
>> +	u32 val;
>> +
>> +	if (!intel_dsi->got_panel_orientation) {
>> +		val = I915_READ(DSPCNTR(intel_crtc->plane));
>> +
>> +		if (val & DISPPLANE_ROTATE_180)
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
>> +		else
>> +			orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
>> +
>> +		intel_panel_set_orientation(panel, orientation);
>> +		intel_dsi->got_panel_orientation = true;
>> +	}
>>   }
>>   
>>   static void intel_dsi_get_config(struct intel_encoder *encoder,
>> @@ -1245,6 +1291,8 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
>>   
>>   	if (IS_GEN9_LP(dev_priv))
>>   		bxt_dsi_get_pipe_config(encoder, pipe_config);
>> +	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>> +		vlv_dsi_get_pipe_config(encoder);
> 
> get_config gets called all the time, this feels like the wrong place for
> this. I assume you want this somewhere at init time? We also don't have
> funny hacks for the fixed_mode readout in intel_lvds.c.

So I've finally been able to make some time to look at this (and your other
review comments) I've changes this so that the hardware read-out happens
from intel_dsi_init(), mirroring the lvds fixed mode readout from
intel_lvds_init().

> Also I'd kinda assume you'd only do this as a fallback, for when the quirk
> table doesn't have an entry?

It is the otherway around, hardware readout is used to set an initial
value and then the quirk table gets checked for any matches which then
override the initial value. The end result is the same though :)

I hope to post a v6 of the patch-set with this and your other remarks
addressed this weekend.

Regards,

Hans






> -Daniel
> 
>>   
>>   	pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp,
>>   				  pipe_config);
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
>> index 7afeb9580f41..92c2fe31f3fd 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi.h
>> +++ b/drivers/gpu/drm/i915/intel_dsi.h
>> @@ -52,6 +52,8 @@ struct intel_dsi {
>>   	/* if true, use HS mode, otherwise LP */
>>   	bool hs;
>>   
>> +	bool got_panel_orientation;
>> +
>>   	/* virtual channel */
>>   	int channel;
>>   
>> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
>> index adc51e452e3e..7d571bef847e 100644
>> --- a/drivers/gpu/drm/i915/intel_panel.c
>> +++ b/drivers/gpu/drm/i915/intel_panel.c
>> @@ -1842,6 +1842,22 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
>>   	panel->backlight.present = false;
>>   }
>>   
>> +void intel_panel_set_orientation(struct intel_panel *panel, int orientation)
>> +{
>> +	struct intel_connector *panel_conn;
>> +	int width = 0, height = 0;
>> +
>> +	if (panel->fixed_mode) {
>> +		width = panel->fixed_mode->hdisplay;
>> +		height = panel->fixed_mode->vdisplay;
>> +	}
>> +
>> +	panel_conn = container_of(panel, struct intel_connector, panel);
>> +	panel_conn->base.display_info.panel_orientation = orientation;
>> +	drm_connector_init_panel_orientation_property(&panel_conn->base,
>> +						      width, height);
>> +}
>> +
>>   /* Set up chip specific backlight functions */
>>   static void
>>   intel_panel_init_backlight_funcs(struct intel_panel *panel)
>> -- 
>> 2.14.3
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx