[PATCH v2] generic: add testcase to test fallocate & f{data,}sync

[PATCH v2] generic: add testcase to test fallocate & f{data,}sync

[Chao Yu]

f2fs can skip isize updating in fsync(), since during mount, f2fs tries
to recovery isize according to valid block address or preallocated flag
in last fsynced dnode block.

However, fallocate() breaks our rule with setting FALLOC_FL_KEEP_SIZE
flag, since it can preallocated block cross EOF, once the file is fsynced,
in POR, we will recover isize incorrectly based on these fallocated
blocks.

This patch adds a new testcase to test fallocate, in order to verify
whether filesystem will do correct recovery on isize.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
---
v2:
- change copyright to Huawei Co.
- refactor description of testcase.
- set status correctly.
 tests/generic/468     | 127 ++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/468.out |  13 ++++++
 tests/generic/group   |   1 +
 3 files changed, 141 insertions(+)
 create mode 100755 tests/generic/468
 create mode 100644 tests/generic/468.out

diff --git a/tests/generic/468 b/tests/generic/468
new file mode 100755
index 000000000000..242589a35e34
--- /dev/null
+++ b/tests/generic/468
@@ -0,0 +1,127 @@
+#! /bin/bash
+# FS QA Test 468
+#
+# This testcase is a fallocate variant of generic/392, it expands to test
+# block preallocation functionality of fallocate.
+# In this case, we are trying to execute:
+# 1. fallocate {,-k}
+# 2. f{data,}sync
+# 3. power-cuts
+# 4. recovery filesystem during mount
+# 5. check inode's metadata
+#
+# In the case of fsync, filesystem should recover all the inode metadata, while
+# recovering i_blocks and i_size at least for fdatasync, so this testcase excepts
+# that inode metadata will be unchanged after recovery.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Huawei.  All Rights Reserved.
+# Author: Chao Yu <yuchao0@huawei.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_supported_os Linux
+_require_test
+
+_require_scratch
+_require_scratch_shutdown
+_require_xfs_io_command "falloc" "-k"
+
+_scratch_mkfs >/dev/null 2>&1
+_require_metadata_journaling $SCRATCH_DEV
+_scratch_mount
+
+testfile=$SCRATCH_MNT/testfile
+
+# check inode metadata after shutdown
+check_inode_metadata()
+{
+	sync_mode=$1
+
+	# fsync or fdatasync
+	if [ $sync_mode = "fsync" ]; then
+		stat_opt='-c "b: %b s: %s a: %x m: %y c: %z"'
+	else
+		stat_opt='-c "b: %b s: %s"'
+	fi
+
+	before=`stat "$stat_opt" $testfile`
+
+	$XFS_IO_PROG -c "$sync_mode" $testfile | _filter_xfs_io
+	src/godown $SCRATCH_MNT | tee -a $seqres.full
+	_scratch_cycle_mount
+
+	after=`stat "$stat_opt" $testfile`
+
+	if [ "$before" != "$after" ]; then
+		echo "Before: $before"
+		echo "After : $after"
+		status=1;	# this is a failure!
+	fi
+	echo "Before: $before" >> $seqres.full
+	echo "After : $after" >> $seqres.full
+	rm $testfile
+}
+
+# fallocate XX KB with f{data}sync, followed by power-cut
+test_falloc()
+{
+	echo "==== falloc $2$3 test with $1 ====" | tee -a $seqres.full
+	$XFS_IO_PROG -f -c "truncate 4202496"	\
+			-c "pwrite 0 4202496"	\
+			-c "fsync"		\
+			-c "falloc $2 4202496 $3"\
+			$testfile >/dev/null
+	check_inode_metadata $1
+}
+
+for i in fsync fdatasync; do
+	test_falloc $i "" 1024
+	test_falloc $i "" 4096
+	test_falloc $i "" 104857600
+	test_falloc $i "-k " 1024
+	test_falloc $i "-k " 4096
+	test_falloc $i "-k " 104857600
+done
+
+status = 0
+exit
diff --git a/tests/generic/468.out b/tests/generic/468.out
new file mode 100644
index 000000000000..b3a28d5ea07c
--- /dev/null
+++ b/tests/generic/468.out
@@ -0,0 +1,13 @@
+QA output created by 468
+==== falloc 1024 test with fsync ====
+==== falloc 4096 test with fsync ====
+==== falloc 104857600 test with fsync ====
+==== falloc -k 1024 test with fsync ====
+==== falloc -k 4096 test with fsync ====
+==== falloc -k 104857600 test with fsync ====
+==== falloc 1024 test with fdatasync ====
+==== falloc 4096 test with fdatasync ====
+==== falloc 104857600 test with fdatasync ====
+==== falloc -k 1024 test with fdatasync ====
+==== falloc -k 4096 test with fdatasync ====
+==== falloc -k 104857600 test with fdatasync ====
diff --git a/tests/generic/group b/tests/generic/group
index 9183950c8dfc..ea2dc04d931e 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -470,3 +470,4 @@
 465 auto rw quick aio
 466 auto quick rw
 467 auto quick exportfs
+468 shutdown auto quick metadata
-- 
2.15.0.55.gc2ece9dc4de6

Re: [PATCH v2] generic: add testcase to test fallocate & f{data,}sync

[Eryu Guan]

[adding ext4 list]

On Wed, Nov 15, 2017 at 04:58:33PM +0800, Chao Yu wrote:
> f2fs can skip isize updating in fsync(), since during mount, f2fs tries
> to recovery isize according to valid block address or preallocated flag
> in last fsynced dnode block.
> 
> However, fallocate() breaks our rule with setting FALLOC_FL_KEEP_SIZE
> flag, since it can preallocated block cross EOF, once the file is fsynced,
> in POR, we will recover isize incorrectly based on these fallocated
> blocks.
> 
> This patch adds a new testcase to test fallocate, in order to verify
> whether filesystem will do correct recovery on isize.
> 
> Signed-off-by: Chao Yu <yuchao0@huawei.com>

This test fails on ext4 as

 ==== falloc -k 1024 test with fdatasync ====
+Before:  "b: 8216 s: 4202496"
+After :  "b: 8208 s: 4202496"
 ==== falloc -k 4096 test with fdatasync ====
+Before:  "b: 8216 s: 4202496"
+After :  "b: 8208 s: 4202496"
 ==== falloc -k 104857600 test with fdatasync ====
+Before:  "b: 213008 s: 4202496"
+After :  "b: 8208 s: 4202496"

So the block counts are changed after fdatasync & fs shutdown in the
fallocate(2) KEEP_SIZE case. Looks like a real ext4 bug, fdatasync
failed to flush the preallocated blocks beyond EOF to disk, but I want
to confirm first with ext4 people. If it turns out to be a case issue,
we'd like to update test case accordingly before merging it.

> ---
> v2:
> - change copyright to Huawei Co.
> - refactor description of testcase.
> - set status correctly.
>  tests/generic/468     | 127 ++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/468.out |  13 ++++++
>  tests/generic/group   |   1 +
>  3 files changed, 141 insertions(+)
>  create mode 100755 tests/generic/468
>  create mode 100644 tests/generic/468.out
> 
> diff --git a/tests/generic/468 b/tests/generic/468
> new file mode 100755
> index 000000000000..242589a35e34
> --- /dev/null
> +++ b/tests/generic/468
> @@ -0,0 +1,127 @@
> +#! /bin/bash
> +# FS QA Test 468
> +#
> +# This testcase is a fallocate variant of generic/392, it expands to test
> +# block preallocation functionality of fallocate.
> +# In this case, we are trying to execute:
> +# 1. fallocate {,-k}
> +# 2. f{data,}sync
> +# 3. power-cuts
> +# 4. recovery filesystem during mount
> +# 5. check inode's metadata
> +#
> +# In the case of fsync, filesystem should recover all the inode metadata, while
> +# recovering i_blocks and i_size at least for fdatasync, so this testcase excepts
> +# that inode metadata will be unchanged after recovery.
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Huawei.  All Rights Reserved.
> +# Author: Chao Yu <yuchao0@huawei.com>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_supported_os Linux
> +_require_test

I'd removed this _require_test call, as test device is not used. I'll
fix it on commit if we don't need v3 (due to the ext4 failure).

> +
> +_require_scratch
> +_require_scratch_shutdown
> +_require_xfs_io_command "falloc" "-k"
> +
> +_scratch_mkfs >/dev/null 2>&1
> +_require_metadata_journaling $SCRATCH_DEV
> +_scratch_mount
> +
> +testfile=$SCRATCH_MNT/testfile
> +
> +# check inode metadata after shutdown
> +check_inode_metadata()
> +{
> +	sync_mode=$1
> +
> +	# fsync or fdatasync
> +	if [ $sync_mode = "fsync" ]; then
> +		stat_opt='-c "b: %b s: %s a: %x m: %y c: %z"'
> +	else
> +		stat_opt='-c "b: %b s: %s"'
> +	fi
> +
> +	before=`stat "$stat_opt" $testfile`
> +
> +	$XFS_IO_PROG -c "$sync_mode" $testfile | _filter_xfs_io
> +	src/godown $SCRATCH_MNT | tee -a $seqres.full
> +	_scratch_cycle_mount
> +
> +	after=`stat "$stat_opt" $testfile`
> +
> +	if [ "$before" != "$after" ]; then
> +		echo "Before: $before"
> +		echo "After : $after"
> +		status=1;	# this is a failure!
> +	fi
> +	echo "Before: $before" >> $seqres.full
> +	echo "After : $after" >> $seqres.full
> +	rm $testfile
> +}
> +
> +# fallocate XX KB with f{data}sync, followed by power-cut
> +test_falloc()
> +{
> +	echo "==== falloc $2$3 test with $1 ====" | tee -a $seqres.full
> +	$XFS_IO_PROG -f -c "truncate 4202496"	\
> +			-c "pwrite 0 4202496"	\
> +			-c "fsync"		\
> +			-c "falloc $2 4202496 $3"\
> +			$testfile >/dev/null
> +	check_inode_metadata $1
> +}
> +
> +for i in fsync fdatasync; do
> +	test_falloc $i "" 1024
> +	test_falloc $i "" 4096
> +	test_falloc $i "" 104857600
> +	test_falloc $i "-k " 1024
> +	test_falloc $i "-k " 4096
> +	test_falloc $i "-k " 104857600
> +done
> +
> +status = 0

This is wrong in bash, should be "status=0", no spaces between "=" :)
I can fix it on commit too.

Thanks,
Eryu

> +exit
> diff --git a/tests/generic/468.out b/tests/generic/468.out
> new file mode 100644
> index 000000000000..b3a28d5ea07c
> --- /dev/null
> +++ b/tests/generic/468.out
> @@ -0,0 +1,13 @@
> +QA output created by 468
> +==== falloc 1024 test with fsync ====
> +==== falloc 4096 test with fsync ====
> +==== falloc 104857600 test with fsync ====
> +==== falloc -k 1024 test with fsync ====
> +==== falloc -k 4096 test with fsync ====
> +==== falloc -k 104857600 test with fsync ====
> +==== falloc 1024 test with fdatasync ====
> +==== falloc 4096 test with fdatasync ====
> +==== falloc 104857600 test with fdatasync ====
> +==== falloc -k 1024 test with fdatasync ====
> +==== falloc -k 4096 test with fdatasync ====
> +==== falloc -k 104857600 test with fdatasync ====
> diff --git a/tests/generic/group b/tests/generic/group
> index 9183950c8dfc..ea2dc04d931e 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -470,3 +470,4 @@
>  465 auto rw quick aio
>  466 auto quick rw
>  467 auto quick exportfs
> +468 shutdown auto quick metadata
> -- 
> 2.15.0.55.gc2ece9dc4de6
> 

Re: [PATCH v2] generic: add testcase to test fallocate & f{data,}sync

[Eryu Guan]

On Wed, Nov 15, 2017 at 07:37:28PM +0800, Eryu Guan wrote:
> [adding ext4 list]
> 
> On Wed, Nov 15, 2017 at 04:58:33PM +0800, Chao Yu wrote:
> > f2fs can skip isize updating in fsync(), since during mount, f2fs tries
> > to recovery isize according to valid block address or preallocated flag
> > in last fsynced dnode block.
> > 
> > However, fallocate() breaks our rule with setting FALLOC_FL_KEEP_SIZE
> > flag, since it can preallocated block cross EOF, once the file is fsynced,
> > in POR, we will recover isize incorrectly based on these fallocated
> > blocks.
> > 
> > This patch adds a new testcase to test fallocate, in order to verify
> > whether filesystem will do correct recovery on isize.
> > 
> > Signed-off-by: Chao Yu <yuchao0@huawei.com>
> 
> This test fails on ext4 as
> 
>  ==== falloc -k 1024 test with fdatasync ====
> +Before:  "b: 8216 s: 4202496"
> +After :  "b: 8208 s: 4202496"
>  ==== falloc -k 4096 test with fdatasync ====
> +Before:  "b: 8216 s: 4202496"
> +After :  "b: 8208 s: 4202496"
>  ==== falloc -k 104857600 test with fdatasync ====
> +Before:  "b: 213008 s: 4202496"
> +After :  "b: 8208 s: 4202496"
> 
> So the block counts are changed after fdatasync & fs shutdown in the
> fallocate(2) KEEP_SIZE case. Looks like a real ext4 bug, fdatasync
> failed to flush the preallocated blocks beyond EOF to disk, but I want
> to confirm first with ext4 people. If it turns out to be a case issue,
> we'd like to update test case accordingly before merging it.

I think I've found the problem, ext4 fallocate(2) path is missing a
ext4_update_inode_fsync_trans(handle, inode, 1) call, as what commit
("67a7d5f561f4 ext4: fix fdatasync(2) after extent manipulation
operations") did.

I'll send an ext4 patch soon.

Thanks,
Eryu

Re: [PATCH v2] generic: add testcase to test fallocate & f{data,}sync

[Chao Yu]

On 2017/11/15 19:37, Eryu Guan wrote:
> [adding ext4 list]
> 
> On Wed, Nov 15, 2017 at 04:58:33PM +0800, Chao Yu wrote:
>> f2fs can skip isize updating in fsync(), since during mount, f2fs tries
>> to recovery isize according to valid block address or preallocated flag
>> in last fsynced dnode block.
>>
>> However, fallocate() breaks our rule with setting FALLOC_FL_KEEP_SIZE
>> flag, since it can preallocated block cross EOF, once the file is fsynced,
>> in POR, we will recover isize incorrectly based on these fallocated
>> blocks.
>>
>> This patch adds a new testcase to test fallocate, in order to verify
>> whether filesystem will do correct recovery on isize.
>>
>> Signed-off-by: Chao Yu <yuchao0@huawei.com>
> 
> This test fails on ext4 as
> 
>  ==== falloc -k 1024 test with fdatasync ====
> +Before:  "b: 8216 s: 4202496"
> +After :  "b: 8208 s: 4202496"
>  ==== falloc -k 4096 test with fdatasync ====
> +Before:  "b: 8216 s: 4202496"
> +After :  "b: 8208 s: 4202496"
>  ==== falloc -k 104857600 test with fdatasync ====
> +Before:  "b: 213008 s: 4202496"
> +After :  "b: 8208 s: 4202496"
> 
> So the block counts are changed after fdatasync & fs shutdown in the
> fallocate(2) KEEP_SIZE case. Looks like a real ext4 bug, fdatasync
> failed to flush the preallocated blocks beyond EOF to disk, but I want
> to confirm first with ext4 people. If it turns out to be a case issue,
> we'd like to update test case accordingly before merging it.
> 
>> ---
>> v2:
>> - change copyright to Huawei Co.
>> - refactor description of testcase.
>> - set status correctly.
>>  tests/generic/468     | 127 ++++++++++++++++++++++++++++++++++++++++++++++++++
>>  tests/generic/468.out |  13 ++++++
>>  tests/generic/group   |   1 +
>>  3 files changed, 141 insertions(+)
>>  create mode 100755 tests/generic/468
>>  create mode 100644 tests/generic/468.out
>>
>> diff --git a/tests/generic/468 b/tests/generic/468
>> new file mode 100755
>> index 000000000000..242589a35e34
>> --- /dev/null
>> +++ b/tests/generic/468
>> @@ -0,0 +1,127 @@
>> +#! /bin/bash
>> +# FS QA Test 468
>> +#
>> +# This testcase is a fallocate variant of generic/392, it expands to test
>> +# block preallocation functionality of fallocate.
>> +# In this case, we are trying to execute:
>> +# 1. fallocate {,-k}
>> +# 2. f{data,}sync
>> +# 3. power-cuts
>> +# 4. recovery filesystem during mount
>> +# 5. check inode's metadata
>> +#
>> +# In the case of fsync, filesystem should recover all the inode metadata, while
>> +# recovering i_blocks and i_size at least for fdatasync, so this testcase excepts
>> +# that inode metadata will be unchanged after recovery.
>> +#
>> +#-----------------------------------------------------------------------
>> +# Copyright (c) 2017 Huawei.  All Rights Reserved.
>> +# Author: Chao Yu <yuchao0@huawei.com>
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation.
>> +#
>> +# This program is distributed in the hope that it would be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write the Free Software Foundation,
>> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
>> +#-----------------------------------------------------------------------
>> +#
>> +
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +here=`pwd`
>> +tmp=/tmp/$$
>> +status=1	# failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>> +	cd /
>> +	rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +
>> +# remove previous $seqres.full before test
>> +rm -f $seqres.full
>> +
>> +# real QA test starts here
>> +
>> +# Modify as appropriate.
>> +_supported_fs generic
>> +_supported_os Linux
>> +_require_test
> 
> I'd removed this _require_test call, as test device is not used. I'll
> fix it on commit if we don't need v3 (due to the ext4 failure).

Oh, that's right, let me know if we need v3. ;)

> 
>> +
>> +_require_scratch
>> +_require_scratch_shutdown
>> +_require_xfs_io_command "falloc" "-k"
>> +
>> +_scratch_mkfs >/dev/null 2>&1
>> +_require_metadata_journaling $SCRATCH_DEV
>> +_scratch_mount
>> +
>> +testfile=$SCRATCH_MNT/testfile
>> +
>> +# check inode metadata after shutdown
>> +check_inode_metadata()
>> +{
>> +	sync_mode=$1
>> +
>> +	# fsync or fdatasync
>> +	if [ $sync_mode = "fsync" ]; then
>> +		stat_opt='-c "b: %b s: %s a: %x m: %y c: %z"'
>> +	else
>> +		stat_opt='-c "b: %b s: %s"'
>> +	fi
>> +
>> +	before=`stat "$stat_opt" $testfile`
>> +
>> +	$XFS_IO_PROG -c "$sync_mode" $testfile | _filter_xfs_io
>> +	src/godown $SCRATCH_MNT | tee -a $seqres.full
>> +	_scratch_cycle_mount
>> +
>> +	after=`stat "$stat_opt" $testfile`
>> +
>> +	if [ "$before" != "$after" ]; then
>> +		echo "Before: $before"
>> +		echo "After : $after"
>> +		status=1;	# this is a failure!
>> +	fi
>> +	echo "Before: $before" >> $seqres.full
>> +	echo "After : $after" >> $seqres.full
>> +	rm $testfile
>> +}
>> +
>> +# fallocate XX KB with f{data}sync, followed by power-cut
>> +test_falloc()
>> +{
>> +	echo "==== falloc $2$3 test with $1 ====" | tee -a $seqres.full
>> +	$XFS_IO_PROG -f -c "truncate 4202496"	\
>> +			-c "pwrite 0 4202496"	\
>> +			-c "fsync"		\
>> +			-c "falloc $2 4202496 $3"\
>> +			$testfile >/dev/null
>> +	check_inode_metadata $1
>> +}
>> +
>> +for i in fsync fdatasync; do
>> +	test_falloc $i "" 1024
>> +	test_falloc $i "" 4096
>> +	test_falloc $i "" 104857600
>> +	test_falloc $i "-k " 1024
>> +	test_falloc $i "-k " 4096
>> +	test_falloc $i "-k " 104857600
>> +done
>> +
>> +status = 0
> 
> This is wrong in bash, should be "status=0", no spaces between "=" :)
> I can fix it on commit too.

Thanks for correcting my coding style issue.

Thanks,

> 
> Thanks,
> Eryu
> 
>> +exit
>> diff --git a/tests/generic/468.out b/tests/generic/468.out
>> new file mode 100644
>> index 000000000000..b3a28d5ea07c
>> --- /dev/null
>> +++ b/tests/generic/468.out
>> @@ -0,0 +1,13 @@
>> +QA output created by 468
>> +==== falloc 1024 test with fsync ====
>> +==== falloc 4096 test with fsync ====
>> +==== falloc 104857600 test with fsync ====
>> +==== falloc -k 1024 test with fsync ====
>> +==== falloc -k 4096 test with fsync ====
>> +==== falloc -k 104857600 test with fsync ====
>> +==== falloc 1024 test with fdatasync ====
>> +==== falloc 4096 test with fdatasync ====
>> +==== falloc 104857600 test with fdatasync ====
>> +==== falloc -k 1024 test with fdatasync ====
>> +==== falloc -k 4096 test with fdatasync ====
>> +==== falloc -k 104857600 test with fdatasync ====
>> diff --git a/tests/generic/group b/tests/generic/group
>> index 9183950c8dfc..ea2dc04d931e 100644
>> --- a/tests/generic/group
>> +++ b/tests/generic/group
>> @@ -470,3 +470,4 @@
>>  465 auto rw quick aio
>>  466 auto quick rw
>>  467 auto quick exportfs
>> +468 shutdown auto quick metadata
>> -- 
>> 2.15.0.55.gc2ece9dc4de6
>>