All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yixun Lan <yixun.lan@amlogic.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Carlo Caione <carlo@caione.org>,
	Yixun Lan <yixun.lan@amlogic.com>,
	Qiufang Dai <qiufang.dai@amlogic.com>,
	Jian Hu <jian.hu@amlogic.com>,
	<linux-amlogic@lists.infradead.org>, <devicetree@vger.kernel.org>,
	<linux-clk@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Date: Thu, 7 Dec 2017 17:53:00 +0800	[thread overview]
Message-ID: <20171207095300.15384-5-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20171207095300.15384-1-yixun.lan@amlogic.com>

From: Qiufang Dai <qiufang.dai@amlogic.com>

Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
 			#address-cells = <0>;
 		};
 
+		hiubus: bus@ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			clkc: clock-controller@0 {
+				compatible = "amlogic,axg-clkc";
+				#clock-cells = <1>;
+				reg = <0x0 0x0 0x0 0x320>;
+			};
+		};
+
 		mailbox: mailbox@ff63dc00 {
 			compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 			reg = <0 0xff63dc00 0 0x400>;
-- 
2.15.0

WARNING: multiple messages have this Message-ID (diff)
From: Yixun Lan <yixun.lan@amlogic.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Carlo Caione <carlo@caione.org>,
	Yixun Lan <yixun.lan@amlogic.com>,
	Qiufang Dai <qiufang.dai@amlogic.com>,
	Jian Hu <jian.hu@amlogic.com>,
	linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Date: Thu, 7 Dec 2017 17:53:00 +0800	[thread overview]
Message-ID: <20171207095300.15384-5-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20171207095300.15384-1-yixun.lan@amlogic.com>

From: Qiufang Dai <qiufang.dai@amlogic.com>

Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
 			#address-cells = <0>;
 		};
 
+		hiubus: bus@ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			clkc: clock-controller@0 {
+				compatible = "amlogic,axg-clkc";
+				#clock-cells = <1>;
+				reg = <0x0 0x0 0x0 0x320>;
+			};
+		};
+
 		mailbox: mailbox@ff63dc00 {
 			compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 			reg = <0 0xff63dc00 0 0x400>;
-- 
2.15.0

WARNING: multiple messages have this Message-ID (diff)
From: yixun.lan@amlogic.com (Yixun Lan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Date: Thu, 7 Dec 2017 17:53:00 +0800	[thread overview]
Message-ID: <20171207095300.15384-5-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20171207095300.15384-1-yixun.lan@amlogic.com>

From: Qiufang Dai <qiufang.dai@amlogic.com>

Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
 			#address-cells = <0>;
 		};
 
+		hiubus: bus at ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			clkc: clock-controller at 0 {
+				compatible = "amlogic,axg-clkc";
+				#clock-cells = <1>;
+				reg = <0x0 0x0 0x0 0x320>;
+			};
+		};
+
 		mailbox: mailbox at ff63dc00 {
 			compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 			reg = <0 0xff63dc00 0 0x400>;
-- 
2.15.0

WARNING: multiple messages have this Message-ID (diff)
From: yixun.lan@amlogic.com (Yixun Lan)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Date: Thu, 7 Dec 2017 17:53:00 +0800	[thread overview]
Message-ID: <20171207095300.15384-5-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20171207095300.15384-1-yixun.lan@amlogic.com>

From: Qiufang Dai <qiufang.dai@amlogic.com>

Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
 
 / {
 	compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
 			#address-cells = <0>;
 		};
 
+		hiubus: bus at ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			clkc: clock-controller at 0 {
+				compatible = "amlogic,axg-clkc";
+				#clock-cells = <1>;
+				reg = <0x0 0x0 0x0 0x320>;
+			};
+		};
+
 		mailbox: mailbox at ff63dc00 {
 			compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
 			reg = <0 0xff63dc00 0 0x400>;
-- 
2.15.0

  parent reply	other threads:[~2017-12-07  9:53 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-07  9:52 [PATCH v5 0/4] add clk controller driver for Meson-AXG SoC Yixun Lan
2017-12-07  9:52 ` Yixun Lan
2017-12-07  9:52 ` Yixun Lan
2017-12-07  9:52 ` Yixun Lan
2017-12-07  9:52 ` [PATCH v5 1/4] dt-bindings: clock: add compatible variant for the Meson-AXG Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:52 ` [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07 22:10   ` Rob Herring
2017-12-07 22:10     ` Rob Herring
2017-12-07 22:10     ` Rob Herring
2017-12-08  1:14     ` Yixun Lan
2017-12-08  1:14       ` Yixun Lan
2017-12-08  1:14       ` Yixun Lan
2017-12-08  1:14       ` Yixun Lan
2017-12-08  9:33     ` Jerome Brunet
2017-12-08  9:33       ` Jerome Brunet
2017-12-08  9:33       ` Jerome Brunet
2017-12-08  9:33       ` Jerome Brunet
2017-12-08 14:22       ` Yixun Lan
2017-12-08 14:22         ` Yixun Lan
2017-12-08 14:22         ` Yixun Lan
2017-12-08 14:22         ` Yixun Lan
2017-12-08 14:27         ` Jerome Brunet
2017-12-08 14:27           ` Jerome Brunet
2017-12-08 14:27           ` Jerome Brunet
2017-12-07  9:52 ` [PATCH v5 3/4] clk: meson-axg: add clock controller drivers Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:52   ` Yixun Lan
2017-12-07  9:53 ` Yixun Lan [this message]
2017-12-07  9:53   ` [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC Yixun Lan
2017-12-07  9:53   ` Yixun Lan
2017-12-07  9:53   ` Yixun Lan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171207095300.15384-5-yixun.lan@amlogic.com \
    --to=yixun.lan@amlogic.com \
    --cc=carlo@caione.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=jian.hu@amlogic.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=qiufang.dai@amlogic.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.