All of lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [git commit] configs/solidrun_macchiatobin: add new defconfigs
@ 2017-12-15  8:28 Thomas Petazzoni
  0 siblings, 0 replies; only message in thread
From: Thomas Petazzoni @ 2017-12-15  8:28 UTC (permalink / raw)
  To: buildroot

commit: https://git.buildroot.net/buildroot/commit/?id=9ea3da06b21ce4750dce2b0fefb130256bd56551
branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/master

Add MacchiatoBin board by SolidRun. This board is based on Marvell
Armada 8040 SoC. Board support package includes the following
two options: mainline and vendor BSPs.

Mainline BSP:
- Marvell ATF v1.3-armada-17.10
- mainline U-Boot v2017.11
- mainline Linux kernel v4.14.4

Marvell BSP with more hardware support enabled:
- Marvell ATF v1.3-armada-17.10
- Marvell U-Boot based on v2017.03
- Marvell Linux kernel based v4.4.52

More details about this board are available on wiki:
- http://wiki.macchiatobin.net

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: misc tweaks in readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 .gitlab-ci.yml                                     |   2 +
 DEVELOPERS                                         |   3 +
 board/solidrun/macchiatobin/genimage.cfg           |  16 +++
 board/solidrun/macchiatobin/linux-extras.config    |   3 +
 ...arvell-extend-the-cp110-syscon-register-a.patch |  45 ++++++++
 ...arvell-add-comphy-nodes-on-cp110-master-a.patch | 118 +++++++++++++++++++++
 ...arvell-mcbin-add-comphy-references-to-Eth.patch |  58 ++++++++++
 board/solidrun/macchiatobin/post-build.sh          |   5 +
 board/solidrun/macchiatobin/readme.txt             |  83 +++++++++++++++
 board/solidrun/macchiatobin/uEnv-example.txt       |   7 ++
 configs/solidrun_macchiatobin_mainline_defconfig   |  43 ++++++++
 configs/solidrun_macchiatobin_marvell_defconfig    |  43 ++++++++
 12 files changed, 426 insertions(+)

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 03c0401..691669f 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -216,6 +216,8 @@ snps_archs38_axs103_defconfig: *defconfig
 snps_archs38_haps_defconfig: *defconfig
 snps_archs38_vdk_defconfig: *defconfig
 socrates_cyclone5_defconfig: *defconfig
+solidrun_macchiatobin_mainline_defconfig: *defconfig
+solidrun_macchiatobin_marvell_defconfig: *defconfig
 stm32f429_disco_defconfig: *defconfig
 stm32f469_disco_defconfig: *defconfig
 telit_evk_pro3_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index b476f4e..de600f5 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1532,10 +1532,13 @@ F:	board/linksprite/pcduino
 F:	board/orangepi/orangepi-zero
 F:	board/orangepi/orangepi-one
 F:	board/orangepi/orangepi-pc-plus/
+F:	board/solidrun/macchiatobin
 F:	configs/linksprite_pcduino_defconfig
 F:	configs/orangepi_one_defconfig
 F:	configs/orangepi_pc_plus_defconfig
 F:	configs/orangepi_zero_defconfig
+F:	configs/solidrun_macchiatobin_mainline_defconfig
+F:	configs/solidrun_macchiatobin_marvell_defconfig
 F:	package/armbian-firmware/
 F:	package/rtl8189fs/
 F:	package/xr819-xradio/
diff --git a/board/solidrun/macchiatobin/genimage.cfg b/board/solidrun/macchiatobin/genimage.cfg
new file mode 100644
index 0000000..fdcda36
--- /dev/null
+++ b/board/solidrun/macchiatobin/genimage.cfg
@@ -0,0 +1,16 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition uboot {
+		in-partition-table = "no"
+		image = "flash-image.bin"
+		offset = 0x200000
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		offset = 0x2200000
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/solidrun/macchiatobin/linux-extras.config b/board/solidrun/macchiatobin/linux-extras.config
new file mode 100644
index 0000000..11267d2
--- /dev/null
+++ b/board/solidrun/macchiatobin/linux-extras.config
@@ -0,0 +1,3 @@
+CONFIG_MARVELL_PHY=y
+CONFIG_MARVELL_10G_PHY=y
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
diff --git a/board/solidrun/macchiatobin/patches/linux/0001-arm64-dts-marvell-extend-the-cp110-syscon-register-a.patch b/board/solidrun/macchiatobin/patches/linux/0001-arm64-dts-marvell-extend-the-cp110-syscon-register-a.patch
new file mode 100644
index 0000000..bcfeb1e
--- /dev/null
+++ b/board/solidrun/macchiatobin/patches/linux/0001-arm64-dts-marvell-extend-the-cp110-syscon-register-a.patch
@@ -0,0 +1,45 @@
+From c25a2b8559989011d43fb901824dd8b981fc6b7b Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Fri, 8 Dec 2017 23:08:34 +0300
+Subject: [PATCH] arm64: dts: marvell: extend the cp110 syscon register area length
+
+This patch extends on both cp110 the system register area length to
+include some of the comphy registers as well.
+
+Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 2 +-
+ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+index f2aa2a81de4d..4dd8c7d53764 100644
+--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
++++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+@@ -143,7 +143,7 @@
+ 
+ 			cpm_syscon0: system-controller at 440000 {
+ 				compatible = "syscon", "simple-mfd";
+-				reg = <0x440000 0x1000>;
++				reg = <0x440000 0x2000>;
+ 
+ 				cpm_clk: clock {
+ 					compatible = "marvell,cp110-clock";
+diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+index 4fe70323abb3..43fa491da6ce 100644
+--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
++++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+@@ -143,7 +143,7 @@
+ 
+ 			cps_syscon0: system-controller at 440000 {
+ 				compatible = "syscon", "simple-mfd";
+-				reg = <0x440000 0x1000>;
++				reg = <0x440000 0x2000>;
+ 
+ 				cps_clk: clock {
+ 					compatible = "marvell,cp110-clock";
+-- 
+2.11.0
+
diff --git a/board/solidrun/macchiatobin/patches/linux/0002-arm64-dts-marvell-add-comphy-nodes-on-cp110-master-a.patch b/board/solidrun/macchiatobin/patches/linux/0002-arm64-dts-marvell-add-comphy-nodes-on-cp110-master-a.patch
new file mode 100644
index 0000000..b298966
--- /dev/null
+++ b/board/solidrun/macchiatobin/patches/linux/0002-arm64-dts-marvell-add-comphy-nodes-on-cp110-master-a.patch
@@ -0,0 +1,118 @@
+From f05fc07443118bb3017c2b6938c63f48845329ca Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Fri, 8 Dec 2017 23:10:36 +0300
+Subject: [PATCH] arm64: dts: marvell: add comphy nodes on cp110 master and slave
+
+This patch describes the comphy available in the cp110 master and slave.
+This comphy provides serdes lanes used by various controllers such as
+the network one.
+
+Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ .../boot/dts/marvell/armada-cp110-master.dtsi      | 38 ++++++++++++++++++++++
+ .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 38 ++++++++++++++++++++++
+ 2 files changed, 76 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+index 4dd8c7d53764..b91c27ccee33 100644
+--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
++++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+@@ -109,6 +109,44 @@
+ 				};
+ 			};
+ 
++			cpm_comphy: phy at 120000 {
++				compatible = "marvell,comphy-cp110";
++				reg = <0x120000 0x6000>;
++				marvell,system-controller = <&cpm_syscon0>;
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				cpm_comphy0: phy at 0 {
++					reg = <0>;
++					#phy-cells = <1>;
++				};
++
++				cpm_comphy1: phy at 1 {
++					reg = <1>;
++					#phy-cells = <1>;
++				};
++
++				cpm_comphy2: phy at 2 {
++					reg = <2>;
++					#phy-cells = <1>;
++				};
++
++				cpm_comphy3: phy at 3 {
++					reg = <3>;
++					#phy-cells = <1>;
++				};
++
++				cpm_comphy4: phy at 4 {
++					reg = <4>;
++					#phy-cells = <1>;
++				};
++
++				cpm_comphy5: phy at 5 {
++					reg = <5>;
++					#phy-cells = <1>;
++				};
++			};
++
+ 			cpm_mdio: mdio at 12a200 {
+ 				#address-cells = <1>;
+ 				#size-cells = <0>;
+diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+index 43fa491da6ce..6849348ae214 100644
+--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
++++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+@@ -109,6 +109,44 @@
+ 				};
+ 			};
+ 
++			cps_comphy: phy at 120000 {
++				compatible = "marvell,comphy-cp110";
++				reg = <0x120000 0x6000>;
++				marvell,system-controller = <&cps_syscon0>;
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				cps_comphy0: phy at 0 {
++					reg = <0>;
++					#phy-cells = <1>;
++				};
++
++				cps_comphy1: phy at 1 {
++					reg = <1>;
++					#phy-cells = <1>;
++				};
++
++				cps_comphy2: phy at 2 {
++					reg = <2>;
++					#phy-cells = <1>;
++				};
++
++				cps_comphy3: phy at 3 {
++					reg = <3>;
++					#phy-cells = <1>;
++				};
++
++				cps_comphy4: phy at 4 {
++					reg = <4>;
++					#phy-cells = <1>;
++				};
++
++				cps_comphy5: phy at 5 {
++					reg = <5>;
++					#phy-cells = <1>;
++				};
++			};
++
+ 			cps_mdio: mdio at 12a200 {
+ 				#address-cells = <1>;
+ 				#size-cells = <0>;
+-- 
+2.11.0
+
diff --git a/board/solidrun/macchiatobin/patches/linux/0003-arm64-dts-marvell-mcbin-add-comphy-references-to-Eth.patch b/board/solidrun/macchiatobin/patches/linux/0003-arm64-dts-marvell-mcbin-add-comphy-references-to-Eth.patch
new file mode 100644
index 0000000..dcbd877
--- /dev/null
+++ b/board/solidrun/macchiatobin/patches/linux/0003-arm64-dts-marvell-mcbin-add-comphy-references-to-Eth.patch
@@ -0,0 +1,58 @@
+From 7a67e72567a9b6104c7ebe134e710610cfb88a6e Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Fri, 8 Dec 2017 23:11:29 +0300
+Subject: [PATCH] arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
+
+This patch adds comphy phandles to the Ethernet ports in the mcbin
+device tree. The comphy is used to configure the serdes PHYs used by
+these ports.
+
+Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+index acf5c7d16d79..49d6590507b5 100644
+--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
++++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+@@ -222,8 +222,11 @@
+ 
+ &cpm_eth0 {
+ 	status = "okay";
++	/* Network PHY */
+ 	phy = <&phy0>;
+ 	phy-mode = "10gbase-kr";
++	/* Generic PHY, providing serdes lanes */
++	phys = <&cpm_comphy4 0>;
+ };
+ 
+ &cpm_sata0 {
+@@ -257,15 +260,21 @@
+ 
+ &cps_eth0 {
+ 	status = "okay";
++	/* Network PHY */
+ 	phy = <&phy8>;
+ 	phy-mode = "10gbase-kr";
++	/* Generic PHY, providing serdes lanes */
++	phys = <&cps_comphy4 0>;
+ };
+ 
+ &cps_eth1 {
+ 	/* CPS Lane 0 - J5 (Gigabit RJ45) */
+ 	status = "okay";
++	/* Network PHY */
+ 	phy = <&ge_phy>;
+ 	phy-mode = "sgmii";
++	/* Generic PHY, providing serdes lanes */
++	phys = <&cps_comphy0 1>;
+ };
+ 
+ &cps_pinctrl {
+-- 
+2.11.0
+
diff --git a/board/solidrun/macchiatobin/post-build.sh b/board/solidrun/macchiatobin/post-build.sh
new file mode 100755
index 0000000..9c1b5b8
--- /dev/null
+++ b/board/solidrun/macchiatobin/post-build.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D ${BOARD_DIR}/uEnv-example.txt ${TARGET_DIR}/boot/uEnv-example.txt
diff --git a/board/solidrun/macchiatobin/readme.txt b/board/solidrun/macchiatobin/readme.txt
new file mode 100644
index 0000000..cdfe740
--- /dev/null
+++ b/board/solidrun/macchiatobin/readme.txt
@@ -0,0 +1,83 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with
+the buildroot environment for the MacchiatoBin board based on the
+Marvell Armada 8040 SoC. Documentation for the board hardware and
+software is available on the wiki at: http://wiki.macchiatobin.net
+
+This default configuration will bring up the board and allow access
+through the serial console.
+
+How to build
+============
+
+There are two build options: mainline support and vendor support.
+
+For the mainline BSP, we use:
+ - Linux v4.14.4
+ - U-Boot v2017.11
+
+For the vendor BSP, we use the sources available from Marvell Github
+page at https://github.com/MarvellEmbeddedProcessors, which uses:
+ - Linux v4.4.52
+ - U-Boot v2017.03
+
+At the moment mainline support for the board is a work in progress.
+Mainline kernel 4.14 with provided patches enables eth2 in 1Gb (RJ45
+connector J5) and eth0 in 10Gb (SFP connector J15). The vendor BSP
+enables more hardware features out of the box, e.g. all the network
+interfaces.
+
+To use the mainline BSP run the following commands:
+
+    $ make solidrun_macchiatobin_mainline_defconfig
+    $ make
+
+To use the vendor BSP run the following commands:
+
+    $ make solidrun_macchiatobin_marvell_defconfig
+    $ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image
+called "sdcard.img" in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync
+  $ sudo sync
+
+How to boot the board
+=====================
+
+The MacchiatoBin board can be setup to load the bootloader from
+different sources including eMMC, SPI flash, and SD-card. In order to
+select boot from SD-card DIP switches SW1 and SW2 should be configured
+as follows:
+
+SW2: 01110
+SW1: 1xxxx
+
+Insert the micro SDcard in the MacchiatoBin board and power it up.
+The serial console is accessible at the micro-USB Type-B connector
+marked CON9. The serial line settings are 115200 8N1.
+
+By default U-Boot will load its environment from the SPI flash. On the
+first boot SPI flash may be empty or it may contain a legacy
+environment incompatible with up-to-date mainline U-Boot and
+kernel. Then the following commands can be used to boot the board:
+
+=> ext4load mmc 1:1 0x01700000 /boot/uEnv-example.txt
+=> env import -t 0x01700000 $filesize
+=> boot
+
+The example environment from uEnv-example.txt can be written to
+SPI flash using the following commands:
+
+=> env default -f -a
+=> ext4load mmc 1:1 0x01700000 /boot/uEnv-example.txt
+=> env import -t 0x01700000 $filesize
+=> saveenv
diff --git a/board/solidrun/macchiatobin/uEnv-example.txt b/board/solidrun/macchiatobin/uEnv-example.txt
new file mode 100644
index 0000000..1967e2b
--- /dev/null
+++ b/board/solidrun/macchiatobin/uEnv-example.txt
@@ -0,0 +1,7 @@
+bootargs=console=ttyS0,115200 root=/dev/mmcblk1p1 rw rootwait
+fdt_addr=0x1000000
+fdt_high=0xffffffffffffffff
+fdt_name=boot/armada-8040-mcbin.dtb
+kernel_addr=0x2000000
+image_name=boot/Image
+bootcmd=mmc dev 1; ext4load mmc 1:1 $kernel_addr $image_name; ext4load mmc 1:1 $fdt_addr $fdt_name; booti $kernel_addr - $fdt_addr
diff --git a/configs/solidrun_macchiatobin_mainline_defconfig b/configs/solidrun_macchiatobin_mainline_defconfig
new file mode 100644
index 0000000..aae8e36
--- /dev/null
+++ b/configs/solidrun_macchiatobin_mainline_defconfig
@@ -0,0 +1,43 @@
+BR2_aarch64=y
+BR2_GLOBAL_PATCH_DIR="board/solidrun/macchiatobin/patches"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
+BR2_TARGET_GENERIC_HOSTNAME="mcbin"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for Marvell MacchiatoBin"
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/MarvellEmbeddedProcessors/atf-marvell.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="atf-v1.3-armada-17.10"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="a80x0_mcbin"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0"
+BR2_TARGET_BINARIES_MARVELL=y
+BR2_TARGET_BINARIES_MARVELL_8040=y
+BR2_TARGET_MV_DDR_MARVELL=y
+
+# U-Boot
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mvebu_mcbin-88f8040"
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.4"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-8040-mcbin"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/solidrun/macchiatobin/linux-extras.config"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+
+# rootfs
+BR2_TARGET_ROOTFS_TAR=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/solidrun/macchiatobin/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/solidrun/macchiatobin/post-build.sh"
diff --git a/configs/solidrun_macchiatobin_marvell_defconfig b/configs/solidrun_macchiatobin_marvell_defconfig
new file mode 100644
index 0000000..1e747c3
--- /dev/null
+++ b/configs/solidrun_macchiatobin_marvell_defconfig
@@ -0,0 +1,43 @@
+BR2_aarch64=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
+BR2_TARGET_GENERIC_HOSTNAME="mcbin"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for Marvell MacchiatoBin"
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/MarvellEmbeddedProcessors/atf-marvell.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="atf-v1.3-armada-17.10"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="a80x0_mcbin"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="USE_COHERENT_MEM=0"
+BR2_TARGET_BINARIES_MARVELL=y
+BR2_TARGET_BINARIES_MARVELL_8040=y
+BR2_TARGET_MV_DDR_MARVELL=y
+
+# U-Boot
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/MarvellEmbeddedProcessors/u-boot-marvell"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="u-boot-2017.03-armada-17.10"
+BR2_TARGET_UBOOT_BOARDNAME="mvebu_mcbin-88f8040"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/MarvellEmbeddedProcessors/linux-marvell"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux-4.4.52-armada-17.10"
+BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v8_lsp"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-8040-mcbin"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+
+# rootfs
+BR2_TARGET_ROOTFS_TAR=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/solidrun/macchiatobin/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/solidrun/macchiatobin/post-build.sh"

^ permalink raw reply related	[flat|nested] only message in thread
only message in thread, other threads:[~2017-12-15  8:28 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-15  8:28 [Buildroot] [git commit] configs/solidrun_macchiatobin: add new defconfigs Thomas Petazzoni

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.