* [PATCH 1/1] usb: serial: option: add support for Telit ME910 PID 0x1101
@ 2017-12-14 15:54 ` Daniele Palmas
0 siblings, 0 replies; 4+ messages in thread
From: Daniele Palmas @ 2017-12-14 15:54 UTC (permalink / raw)
To: Johan Hovold; +Cc: linux-usb, linux-kernel, Daniele Palmas
This patch adds support for PID 0x1101 of Telit ME910.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
---
Following lsusb output for 0x1101 composition
tty, tty, tty, rmnet
Bus 003 Device 015: ID 1bc7:1101 Telit Wireless Solutions
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1bc7 Telit Wireless Solutions
idProduct 0x1101
bcdDevice 0.00
iManufacturer 3 Telit
iProduct 2 Telit ME910
iSerial 4 5f97073d
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 122
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 1 Telit Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 254
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
---
drivers/usb/serial/option.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 3b35138..b02fb57 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -280,6 +280,7 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
#define TELIT_PRODUCT_ME910 0x1100
+#define TELIT_PRODUCT_ME910_DUAL_MODEM 0x1101
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
#define TELIT_PRODUCT_LE910_USBCFG4 0x1206
@@ -645,6 +646,11 @@ static const struct option_blacklist_info telit_me910_blacklist = {
.reserved = BIT(1) | BIT(3),
};
+static const struct option_blacklist_info telit_me910_dual_modem_blacklist = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(3),
+};
+
static const struct option_blacklist_info telit_le910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(2),
@@ -1244,6 +1250,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
+ .driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [1/1] usb: serial: option: add support for Telit ME910 PID 0x1101
@ 2017-12-14 15:54 ` Daniele Palmas
0 siblings, 0 replies; 4+ messages in thread
From: Daniele Palmas @ 2017-12-14 15:54 UTC (permalink / raw)
To: Johan Hovold; +Cc: linux-usb, linux-kernel, Daniele Palmas
This patch adds support for PID 0x1101 of Telit ME910.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
---
Following lsusb output for 0x1101 composition
tty, tty, tty, rmnet
Bus 003 Device 015: ID 1bc7:1101 Telit Wireless Solutions
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1bc7 Telit Wireless Solutions
idProduct 0x1101
bcdDevice 0.00
iManufacturer 3 Telit
iProduct 2 Telit ME910
iSerial 4 5f97073d
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 122
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 1 Telit Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 254
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
---
drivers/usb/serial/option.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 3b35138..b02fb57 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -280,6 +280,7 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
#define TELIT_PRODUCT_ME910 0x1100
+#define TELIT_PRODUCT_ME910_DUAL_MODEM 0x1101
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
#define TELIT_PRODUCT_LE910_USBCFG4 0x1206
@@ -645,6 +646,11 @@ static const struct option_blacklist_info telit_me910_blacklist = {
.reserved = BIT(1) | BIT(3),
};
+static const struct option_blacklist_info telit_me910_dual_modem_blacklist = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(3),
+};
+
static const struct option_blacklist_info telit_le910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(2),
@@ -1244,6 +1250,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
+ .driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 1/1] usb: serial: option: add support for Telit ME910 PID 0x1101
@ 2017-12-15 8:40 ` Johan Hovold
0 siblings, 0 replies; 4+ messages in thread
From: Johan Hovold @ 2017-12-15 8:40 UTC (permalink / raw)
To: Daniele Palmas; +Cc: Johan Hovold, linux-usb, linux-kernel
On Thu, Dec 14, 2017 at 04:54:45PM +0100, Daniele Palmas wrote:
> This patch adds support for PID 0x1101 of Telit ME910.
>
> Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Applied, thanks.
Johan
^ permalink raw reply [flat|nested] 4+ messages in thread
* [1/1] usb: serial: option: add support for Telit ME910 PID 0x1101
@ 2017-12-15 8:40 ` Johan Hovold
0 siblings, 0 replies; 4+ messages in thread
From: Johan Hovold @ 2017-12-15 8:40 UTC (permalink / raw)
To: Daniele Palmas; +Cc: Johan Hovold, linux-usb, linux-kernel
On Thu, Dec 14, 2017 at 04:54:45PM +0100, Daniele Palmas wrote:
> This patch adds support for PID 0x1101 of Telit ME910.
>
> Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Applied, thanks.
Johan
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-12-15 8:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-14 15:54 [PATCH 1/1] usb: serial: option: add support for Telit ME910 PID 0x1101 Daniele Palmas
2017-12-14 15:54 ` [1/1] " Daniele Palmas
2017-12-15 8:40 ` [PATCH 1/1] " Johan Hovold
2017-12-15 8:40 ` [1/1] " Johan Hovold
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.