* [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses
@ 2017-12-20 19:27 ` Krzysztof Kozlowski
0 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
Kukjin Kim, Krzysztof Kozlowski, Chanwoo Choi, Marek Szyprowski,
Andrzej Hajda, Alim Akhtar, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel
Convert all hex addresses in node unit addresses to lower case to
fix warnings like:
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000"
Conversion was done using sed:
$ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 1962b8074349..0ba5df825eff 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -994,7 +994,7 @@
reg = <0x145f0000 0x1038>;
};
- gsc_0: video-scaler@13C00000 {
+ gsc_0: video-scaler@13c00000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c00000 0x1000>;
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -1008,7 +1008,7 @@
power-domains = <&pd_gscl>;
};
- gsc_1: video-scaler@13C10000 {
+ gsc_1: video-scaler@13c10000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c10000 0x1000>;
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
@@ -1022,7 +1022,7 @@
power-domains = <&pd_gscl>;
};
- gsc_2: video-scaler@13C20000 {
+ gsc_2: video-scaler@13c20000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c20000 0x1000>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
@@ -1049,7 +1049,7 @@
power-domains = <&pd_mscl>;
};
- mfc: codec@152E0000 {
+ mfc: codec@152e0000 {
compatible = "samsung,exynos5433-mfc";
reg = <0x152E0000 0x10000>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 9a3fbed1765a..3504837b1d43 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -103,7 +103,7 @@
#size-cells = <1>;
ranges;
- pdma0: pdma@10E10000 {
+ pdma0: pdma@10e10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10E10000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -114,7 +114,7 @@
#dma-requests = <32>;
};
- pdma1: pdma@10EB0000 {
+ pdma1: pdma@10eb0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10EB0000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses
@ 2017-12-20 19:27 ` Krzysztof Kozlowski
0 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw)
To: linux-arm-kernel
Convert all hex addresses in node unit addresses to lower case to
fix warnings like:
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
Node /soc/video-scaler at 13C00000 simple-bus unit address format error, expected "13c00000"
Conversion was done using sed:
$ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 1962b8074349..0ba5df825eff 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -994,7 +994,7 @@
reg = <0x145f0000 0x1038>;
};
- gsc_0: video-scaler at 13C00000 {
+ gsc_0: video-scaler at 13c00000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c00000 0x1000>;
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -1008,7 +1008,7 @@
power-domains = <&pd_gscl>;
};
- gsc_1: video-scaler at 13C10000 {
+ gsc_1: video-scaler at 13c10000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c10000 0x1000>;
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
@@ -1022,7 +1022,7 @@
power-domains = <&pd_gscl>;
};
- gsc_2: video-scaler at 13C20000 {
+ gsc_2: video-scaler at 13c20000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c20000 0x1000>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
@@ -1049,7 +1049,7 @@
power-domains = <&pd_mscl>;
};
- mfc: codec at 152E0000 {
+ mfc: codec at 152e0000 {
compatible = "samsung,exynos5433-mfc";
reg = <0x152E0000 0x10000>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 9a3fbed1765a..3504837b1d43 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -103,7 +103,7 @@
#size-cells = <1>;
ranges;
- pdma0: pdma at 10E10000 {
+ pdma0: pdma at 10e10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10E10000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -114,7 +114,7 @@
#dma-requests = <32>;
};
- pdma1: pdma at 10EB0000 {
+ pdma1: pdma at 10eb0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10EB0000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address
2017-12-20 19:27 ` Krzysztof Kozlowski
@ 2017-12-20 19:27 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Catalin Marinas, Will Deacon,
Kukjin Kim, Krzysztof Kozlowski, Chanwoo Choi, Marek Szyprowski,
Andrzej Hajda, Alim Akhtar, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel
Fix typo in unit address of MSCL clock controller (the reg entry is
correct).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 0ba5df825eff..3e8311c60d1b 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -468,7 +468,7 @@
clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
};
- cmu_mscl: clock-controller@105d0000 {
+ cmu_mscl: clock-controller@150d0000 {
compatible = "samsung,exynos5433-cmu-mscl";
reg = <0x150d0000 0x1000>;
#clock-cells = <1>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address
@ 2017-12-20 19:27 ` Krzysztof Kozlowski
0 siblings, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2017-12-20 19:27 UTC (permalink / raw)
To: linux-arm-kernel
Fix typo in unit address of MSCL clock controller (the reg entry is
correct).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 0ba5df825eff..3e8311c60d1b 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -468,7 +468,7 @@
clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
};
- cmu_mscl: clock-controller at 105d0000 {
+ cmu_mscl: clock-controller at 150d0000 {
compatible = "samsung,exynos5433-cmu-mscl";
reg = <0x150d0000 0x1000>;
#clock-cells = <1>;
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses
@ 2017-12-21 0:51 ` Chanwoo Choi
0 siblings, 0 replies; 10+ messages in thread
From: Chanwoo Choi @ 2017-12-21 0:51 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda,
Alim Akhtar, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
Dear Krzysztof,
On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote:
> Convert all hex addresses in node unit addresses to lower case to
> fix warnings like:
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
> Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000"
>
> Conversion was done using sed:
> $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 1962b8074349..0ba5df825eff 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -994,7 +994,7 @@
> reg = <0x145f0000 0x1038>;
> };
>
> - gsc_0: video-scaler@13C00000 {
> + gsc_0: video-scaler@13c00000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c00000 0x1000>;
> interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1008,7 +1008,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_1: video-scaler@13C10000 {
> + gsc_1: video-scaler@13c10000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c10000 0x1000>;
> interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1022,7 +1022,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_2: video-scaler@13C20000 {
> + gsc_2: video-scaler@13c20000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c20000 0x1000>;
> interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1049,7 +1049,7 @@
> power-domains = <&pd_mscl>;
> };
>
> - mfc: codec@152E0000 {
> + mfc: codec@152e0000 {
> compatible = "samsung,exynos5433-mfc";
> reg = <0x152E0000 0x10000>;
> interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 9a3fbed1765a..3504837b1d43 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -103,7 +103,7 @@
> #size-cells = <1>;
> ranges;
>
> - pdma0: pdma@10E10000 {
> + pdma0: pdma@10e10000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10E10000 0x1000>;
> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> @@ -114,7 +114,7 @@
> #dma-requests = <32>;
> };
>
> - pdma1: pdma@10EB0000 {
> + pdma1: pdma@10eb0000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10EB0000 0x1000>;
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses
@ 2017-12-21 0:51 ` Chanwoo Choi
0 siblings, 0 replies; 10+ messages in thread
From: Chanwoo Choi @ 2017-12-21 0:51 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda,
Alim Akhtar, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Dear Krzysztof,
On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote:
> Convert all hex addresses in node unit addresses to lower case to
> fix warnings like:
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
> Node /soc/video-scaler@13C00000 simple-bus unit address format error, expected "13c00000"
>
> Conversion was done using sed:
> $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
>
> Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 1962b8074349..0ba5df825eff 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -994,7 +994,7 @@
> reg = <0x145f0000 0x1038>;
> };
>
> - gsc_0: video-scaler@13C00000 {
> + gsc_0: video-scaler@13c00000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c00000 0x1000>;
> interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1008,7 +1008,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_1: video-scaler@13C10000 {
> + gsc_1: video-scaler@13c10000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c10000 0x1000>;
> interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1022,7 +1022,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_2: video-scaler@13C20000 {
> + gsc_2: video-scaler@13c20000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c20000 0x1000>;
> interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1049,7 +1049,7 @@
> power-domains = <&pd_mscl>;
> };
>
> - mfc: codec@152E0000 {
> + mfc: codec@152e0000 {
> compatible = "samsung,exynos5433-mfc";
> reg = <0x152E0000 0x10000>;
> interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 9a3fbed1765a..3504837b1d43 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -103,7 +103,7 @@
> #size-cells = <1>;
> ranges;
>
> - pdma0: pdma@10E10000 {
> + pdma0: pdma@10e10000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10E10000 0x1000>;
> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> @@ -114,7 +114,7 @@
> #dma-requests = <32>;
> };
>
> - pdma1: pdma@10EB0000 {
> + pdma1: pdma@10eb0000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10EB0000 0x1000>;
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses
@ 2017-12-21 0:51 ` Chanwoo Choi
0 siblings, 0 replies; 10+ messages in thread
From: Chanwoo Choi @ 2017-12-21 0:51 UTC (permalink / raw)
To: linux-arm-kernel
Dear Krzysztof,
On 2017? 12? 21? 04:27, Krzysztof Kozlowski wrote:
> Convert all hex addresses in node unit addresses to lower case to
> fix warnings like:
> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
> Node /soc/video-scaler at 13C00000 simple-bus unit address format error, expected "13c00000"
>
> Conversion was done using sed:
> $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 1962b8074349..0ba5df825eff 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -994,7 +994,7 @@
> reg = <0x145f0000 0x1038>;
> };
>
> - gsc_0: video-scaler at 13C00000 {
> + gsc_0: video-scaler at 13c00000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c00000 0x1000>;
> interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1008,7 +1008,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_1: video-scaler at 13C10000 {
> + gsc_1: video-scaler at 13c10000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c10000 0x1000>;
> interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1022,7 +1022,7 @@
> power-domains = <&pd_gscl>;
> };
>
> - gsc_2: video-scaler at 13C20000 {
> + gsc_2: video-scaler at 13c20000 {
> compatible = "samsung,exynos5433-gsc";
> reg = <0x13c20000 0x1000>;
> interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1049,7 +1049,7 @@
> power-domains = <&pd_mscl>;
> };
>
> - mfc: codec at 152E0000 {
> + mfc: codec at 152e0000 {
> compatible = "samsung,exynos5433-mfc";
> reg = <0x152E0000 0x10000>;
> interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 9a3fbed1765a..3504837b1d43 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -103,7 +103,7 @@
> #size-cells = <1>;
> ranges;
>
> - pdma0: pdma at 10E10000 {
> + pdma0: pdma at 10e10000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10E10000 0x1000>;
> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
> @@ -114,7 +114,7 @@
> #dma-requests = <32>;
> };
>
> - pdma1: pdma at 10EB0000 {
> + pdma1: pdma at 10eb0000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10EB0000 0x1000>;
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address
@ 2017-12-21 0:54 ` Chanwoo Choi
0 siblings, 0 replies; 10+ messages in thread
From: Chanwoo Choi @ 2017-12-21 0:54 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda,
Alim Akhtar, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote:
> Fix typo in unit address of MSCL clock controller (the reg entry is
> correct).
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 0ba5df825eff..3e8311c60d1b 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -468,7 +468,7 @@
> clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
> };
>
> - cmu_mscl: clock-controller@105d0000 {
> + cmu_mscl: clock-controller@150d0000 {
> compatible = "samsung,exynos5433-cmu-mscl";
> reg = <0x150d0000 0x1000>;
> #clock-cells = <1>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address
@ 2017-12-21 0:54 ` Chanwoo Choi
0 siblings, 0 replies; 10+ messages in thread
From: Chanwoo Choi @ 2017-12-21 0:54 UTC (permalink / raw)
To: Krzysztof Kozlowski, Rob Herring, Mark Rutland, Catalin Marinas,
Will Deacon, Kukjin Kim, Marek Szyprowski, Andrzej Hajda,
Alim Akhtar, devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 2017년 12월 21일 04:27, Krzysztof Kozlowski wrote:
> Fix typo in unit address of MSCL clock controller (the reg entry is
> correct).
>
> Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 0ba5df825eff..3e8311c60d1b 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -468,7 +468,7 @@
> clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
> };
>
> - cmu_mscl: clock-controller@105d0000 {
> + cmu_mscl: clock-controller@150d0000 {
> compatible = "samsung,exynos5433-cmu-mscl";
> reg = <0x150d0000 0x1000>;
> #clock-cells = <1>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address
@ 2017-12-21 0:54 ` Chanwoo Choi
0 siblings, 0 replies; 10+ messages in thread
From: Chanwoo Choi @ 2017-12-21 0:54 UTC (permalink / raw)
To: linux-arm-kernel
On 2017? 12? 21? 04:27, Krzysztof Kozlowski wrote:
> Fix typo in unit address of MSCL clock controller (the reg entry is
> correct).
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 0ba5df825eff..3e8311c60d1b 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -468,7 +468,7 @@
> clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
> };
>
> - cmu_mscl: clock-controller at 105d0000 {
> + cmu_mscl: clock-controller at 150d0000 {
> compatible = "samsung,exynos5433-cmu-mscl";
> reg = <0x150d0000 0x1000>;
> #clock-cells = <1>;
>
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-12-21 0:54 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20171220192737epcas4p17c4e71c11e5864fd59f06396c0867a3a@epcas4p1.samsung.com>
2017-12-20 19:27 ` [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses Krzysztof Kozlowski
2017-12-20 19:27 ` Krzysztof Kozlowski
2017-12-20 19:27 ` [PATCH 2/2] arm64: dts: exynos: Fix typo in MSCL clock controller unit address Krzysztof Kozlowski
2017-12-20 19:27 ` Krzysztof Kozlowski
2017-12-21 0:54 ` Chanwoo Choi
2017-12-21 0:54 ` Chanwoo Choi
2017-12-21 0:54 ` Chanwoo Choi
2017-12-21 0:51 ` [PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses Chanwoo Choi
2017-12-21 0:51 ` Chanwoo Choi
2017-12-21 0:51 ` Chanwoo Choi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.