* [Buildroot] systemd: build failure against pam on arm @ 2017-06-01 2:29 Christian Stewart 2017-06-01 18:36 ` Christian Stewart 2017-06-01 22:03 ` Peter Korsgaard 0 siblings, 2 replies; 24+ messages in thread From: Christian Stewart @ 2017-06-01 2:29 UTC (permalink / raw) To: buildroot Hi all, Compiling against 2017.05, with the following defconfig: BR2_arm=y BR2_cortex_a15=y BR2_ARM_FPU_NEON_VFPV4=y BR2_OPTIMIZE_2=y BR2_TOOLCHAIN_EXTERNAL=y BR2_INIT_SYSTEMD=y # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_LINUX_PAM=y I get this error consistently during the systemd compilation when PAM is enabled: /output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: error: /lib/libpam.so: incompatible target /output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: error: /lib/libpam_misc.so: incompatible target collect2: error: ld returned 1 exit status It looks like it's attempting to link against /lib/libpam.so from my system. This is a pretty huge showstopper! Thanks, Christian Stewart ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-06-01 2:29 [Buildroot] systemd: build failure against pam on arm Christian Stewart @ 2017-06-01 18:36 ` Christian Stewart 2017-06-01 22:03 ` Peter Korsgaard 1 sibling, 0 replies; 24+ messages in thread From: Christian Stewart @ 2017-06-01 18:36 UTC (permalink / raw) To: buildroot Hi All, On Wed, May 31, 2017 at 7:29 PM, Christian Stewart <christian@paral.in> wrote: > Compiling against 2017.05 > /output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam.so: incompatible target > /output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam_misc.so: incompatible target > collect2: error: ld returned 1 exit status I have bisected the issue down to this commit: 400eaa3452e9380ec77ac62266530055506ea6e7 is the first bad commit commit 400eaa3452e9380ec77ac62266530055506ea6e7 Author: Fabio Estevam <festevam@gmail.com> Date: Mon Feb 20 08:57:33 2017 -0300 linux: bump default to version 4.10 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> :040000 040000 126b4402798481ff4f718cffc974f612c3f374f3 07e93971d57d6f591d0ba4c957febb048fda48ef M linux Bisecting using this script: probe-issue.bash: #!/bin/bash set -eo pipefail make clean cat > defconfig <<'_EOF' BR2_arm=y BR2_cortex_a15=y BR2_ARM_FPU_NEON_VFPV4=y BR2_OPTIMIZE_2=y BR2_TOOLCHAIN_EXTERNAL=y BR2_INIT_SYSTEMD=y # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_LINUX_PAM=y _EOF make defconfig BR2_DEFCONFIG=defconfig make systemd buildroot: git bisect run ../probe-issue.bash Reliable failure is systemd attempting to link against /lib/libpam.so. Thanks, Christian Stewart ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-06-01 2:29 [Buildroot] systemd: build failure against pam on arm Christian Stewart 2017-06-01 18:36 ` Christian Stewart @ 2017-06-01 22:03 ` Peter Korsgaard 2017-06-01 23:35 ` Christian Stewart 1 sibling, 1 reply; 24+ messages in thread From: Peter Korsgaard @ 2017-06-01 22:03 UTC (permalink / raw) To: buildroot >>>>> "Christian" == Christian Stewart <christian@paral.in> writes: > Hi all, > Compiling against 2017.05, with the following defconfig: > BR2_arm=y > BR2_cortex_a15=y > BR2_ARM_FPU_NEON_VFPV4=y > BR2_OPTIMIZE_2=y > BR2_TOOLCHAIN_EXTERNAL=y > BR2_INIT_SYSTEMD=y > # BR2_TARGET_ROOTFS_TAR is not set > BR2_PACKAGE_LINUX_PAM=y > I get this error consistently during the systemd compilation when PAM > is enabled: > /output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam.so: incompatible target > /output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam_misc.so: incompatible target > collect2: error: ld returned 1 exit status > It looks like it's attempting to link against /lib/libpam.so from my system. Can you paste a few more lines above this error? I cannot reproduce it here, not even after install libpam0g-dev on my build host. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-06-01 22:03 ` Peter Korsgaard @ 2017-06-01 23:35 ` Christian Stewart 2017-06-03 2:48 ` Christian Stewart 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-06-01 23:35 UTC (permalink / raw) To: buildroot Hi Peter, On Thu, Jun 1, 2017 at 3:03 PM, Peter Korsgaard <peter@korsgaard.com> wrote: > Can you paste a few more lines above this error? Here: >>> systemd 233 Building PATH="/home/hristian/jpl_skiff/skiff/buildroot-work/output/host/bin:/home/hristian/jpl_skiff/skiff/buildroot-work/output/host/sbin:/home/hristian/jpl_skiff/skiff/buildroot-work/output/host/usr/bin:/home/hristian/jpl_skiff/skiff/buildroot-work/output/host/usr/sbin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/5.4.0:/home/hristian/go/bin:/home/hristian/.powerline/scripts" /usr/bin/make -j17 -C /home/hristian/jpl_skiff/skiff/buildroot-work/output/build/systemd-233/ make[1]: Entering directory '/home/hristian/jpl_skiff/skiff/buildroot-work/output/build/systemd-233' /usr/bin/make --no-print-directory all-recursive Making all in . CCLD libnetworkd-core.la CCLD libnss_systemd.la CCLD libnss_myhostname.la CCLD libnss_resolve.la CCLD systemd-cgtop CCLD systemd-cgls CCLD systemd-nspawn CCLD systemd-detect-virt CCLD systemd-delta CCLD systemd-analyze CCLD systemd-run CCLD systemd-mount CCLD systemd-stdio-bridge CCLD systemd-path CCLD hostnamectl CCLD systemd-socket-activate CCLD timedatectl CCLD systemd-resolve CCLD systemd-notify CCLD systemd-ask-password CCLD systemd-tty-ask-password-agent CCLD systemctl CCLD systemd-machine-id-setup CCLD systemd-escape CCLD systemd-tmpfiles CCLD systemd-hwdb CCLD systemd CCLD systemd-cgroups-agent CCLD systemd-initctl CCLD systemd-remount-fs CCLD systemd-volatile-root CCLD systemd-reply-password /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: error: /lib/libpam.so: incompatible target /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: error: /lib/libpam_misc.so: incompatible target collect2: error: ld returned 1 exit status make[3]: *** [Makefile:12503: systemd-analyze] Error 1 make[3]: *** Waiting for unfinished jobs.... /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: error: /lib/libpam.so: incompatible target /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: error: /lib/libpam_misc.so: incompatible target collect2: error: ld returned 1 exit status make[3]: *** [Makefile:12475: systemd] Error 1 make[2]: *** [Makefile:22633: all-recursive] Error 1 make[1]: *** [Makefile:10160: all] Error 2 make[1]: Leaving directory '/home/hristian/jpl_skiff/skiff/buildroot-work/output/build/systemd-233' make: *** [package/pkg-generic.mk:230: /home/hristian/jpl_skiff/skiff/buildroot-work/output/build/systemd-233/.stamp_built] Error 2 Thanks, Christian Stewart ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-06-01 23:35 ` Christian Stewart @ 2017-06-03 2:48 ` Christian Stewart 2017-06-03 10:54 ` Waldemar Brodkorb 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-06-03 2:48 UTC (permalink / raw) To: buildroot Hi all, On Thu, Jun 1, 2017 at 4:35 PM, Christian Stewart <christian@paral.in> wrote: > /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam.so: incompatible target > /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam_misc.so: incompatible target > collect2: error: ld returned 1 exit status > make[3]: *** [Makefile:12503: systemd-analyze] Error 1 > make[3]: *** Waiting for unfinished jobs.... > /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam.so: incompatible target > /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: > error: /lib/libpam_misc.so: incompatible target > collect2: error: ld returned 1 exit status Reproduced on several Gentoo machines. The environment looks clean. It compiles just fine on any commit before 400eaa3452e9380ec77ac62266530055506ea6e7. Thanks, Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-06-03 2:48 ` Christian Stewart @ 2017-06-03 10:54 ` Waldemar Brodkorb 2017-12-19 23:26 ` Christian Stewart 2017-12-23 7:25 ` Christian Stewart 0 siblings, 2 replies; 24+ messages in thread From: Waldemar Brodkorb @ 2017-06-03 10:54 UTC (permalink / raw) To: buildroot Hi, can you make the last failing link command more verbose? CCLD should be expanded to the full command used. best regards Waldemar > Am 03.06.2017 um 04:48 schrieb Christian Stewart <christian@paral.in>: > > Hi all, > >> On Thu, Jun 1, 2017 at 4:35 PM, Christian Stewart <christian@paral.in> wrote: >> /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: >> error: /lib/libpam.so: incompatible target >> /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: >> error: /lib/libpam_misc.so: incompatible target >> collect2: error: ld returned 1 exit status >> make[3]: *** [Makefile:12503: systemd-analyze] Error 1 >> make[3]: *** Waiting for unfinished jobs.... >> /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: >> error: /lib/libpam.so: incompatible target >> /home/hristian/jpl_skiff/skiff/buildroot-work/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-linux-gnueabihf/6.3.1/../../../../arm-linux-gnueabihf/bin/ld.gold: >> error: /lib/libpam_misc.so: incompatible target >> collect2: error: ld returned 1 exit status > > Reproduced on several Gentoo machines. The environment looks clean. It > compiles just fine on any commit before > 400eaa3452e9380ec77ac62266530055506ea6e7. > > Thanks, > Christian > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-06-03 10:54 ` Waldemar Brodkorb @ 2017-12-19 23:26 ` Christian Stewart 2017-12-20 0:31 ` Christian Stewart 2017-12-23 7:25 ` Christian Stewart 1 sibling, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-12-19 23:26 UTC (permalink / raw) To: buildroot Hi Waldemar, all, Waldemar Brodkorb <wbx@openadk.org> writes: > can you make the last failing link command more verbose? > CCLD should be expanded to the full command used. I'm still seeing this error under Gentoo against 2017.11: >>> systemd 234 Building PATH="/buildroot/host/bin:/buildroot/host/sbin:/usr/x86_64-pc-linux-gnu/gcc-bin/6.4.0:/usr/local/bin:/usr/bin:/bin:/opt/bin:/opt/golang/bin /usr/bin/make -j5 -C /buildroot/build/systemd-234/ Making all in . CCLD libnss_systemd.la CCLD libnss_myhostname.la CCLD systemd-cgtop CCLD systemd-cgls CCLD systemd-nspawn CCLD systemd-detect-virt CCLD systemd-delta CCLD systemd-analyze CCLD systemd-run CCLD systemd-mount CCLD systemd-stdio-bridge CCLD systemd-path CCLD busctl CCLD systemd-socket-activate /lib/libpam.so: file not recognized: File format not recognized collect2: error: ld returned 1 exit status I believe on Gentoo some sort of environment leakage is breaking the lib path. defconfig: BR2_arm=y BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y BR2_ARM_INSTRUCTIONS_THUMB2=y BR2_TOOLCHAIN_EXTERNAL=y BR2_INIT_SYSTEMD=y This has been an issue for quite some time, and the reason why I have not upgraded past the early 2017 release. I finally upgraded to 2017.11 and have found that it's once again broken compilations on my machine. I'm not sure how to get Buildroot to produce a more verbose CCLD output, I have tried "make VERBOSE=1" but this doesn't give me more than shown above. I previously bisected the issue down to commit 400eaa3452 if that helps. That commit bumped the linux headers (I believe) from 4.9.9 to 4.10.0. Best, Christian Stewart ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-19 23:26 ` Christian Stewart @ 2017-12-20 0:31 ` Christian Stewart 0 siblings, 0 replies; 24+ messages in thread From: Christian Stewart @ 2017-12-20 0:31 UTC (permalink / raw) To: buildroot Hi all, Christian Stewart <christian@paral.in> writes: > I'm still seeing this error under Gentoo against 2017.11: > CCLD busctl > CCLD systemd-socket-activate > /lib/libpam.so: file not recognized: File format not recognized > collect2: error: ld returned 1 exit status > > defconfig: I have found that the defconfig I sent in my previous email does not reproduce the issue. The issue can successfully be reproduced against 2017.11 with the following defconfig: BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y BR2_CCACHE=y BR2_OPTIMIZE_2=y BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y BR2_BINUTILS_VERSION_2_27_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_GCC_ENABLE_LTO=y BR2_INIT_SYSTEMD=y BR2_SYSTEM_BIN_SH_BASH=y BR2_ENABLE_LOCALE_WHITELIST="C en_US en_US.UTF-8" BR2_GENERATE_LOCALE="en_US.UTF-8" BR2_PACKAGE_BUSYBOX_SELINUX=y I'm not sure what it is in this set of config options that causes the problem. Best, Christian Stewart ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-06-03 10:54 ` Waldemar Brodkorb 2017-12-19 23:26 ` Christian Stewart @ 2017-12-23 7:25 ` Christian Stewart 2017-12-23 10:06 ` Waldemar Brodkorb 1 sibling, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-12-23 7:25 UTC (permalink / raw) To: buildroot Hi Waldemar, all, Waldemar Brodkorb <wbx@openadk.org> writes: > can you make the last failing link command more verbose? > CCLD should be expanded to the full command used. I went back and figured out how to make autotools verbose in Buildroot, so here you are. Note that I am using out-of-tree build mode, like this: make -O$(pwd) -C path/to/buildroot /bin/sh ./libtool --tag=CC --mode=link /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -pie -o busctl src/busctl/busctl.o src/busctl/busctl-introspect.o libsystemd-shared.la libtool: link: /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -pie -o systemd-mount src/mount/mount-tool.o ./.libs/libsystemd-shared.so -L/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lcap -lrt -lresolv /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -llz4 /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /home/paralin/buildroot/build/util-linux-2.31/.libs/libuuid.so -pthread -Wl,-rpath -Wl,/home/paralin/buildroot/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -Wl,-rpath -Wl,/home/paralin/buildroot/build/util-linux-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib libtool: link: /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -I/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libmount -I/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/blkid -I/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/uuid -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -pie -o systemd-analyze src/analyze/systemd_analyze-analyze.o src/analyze/systemd_analyze-analyze-verify.o ./.libs/libcore.a /home/paralin/buildroot/build/systemd-234/.libs/libsystemd-shared.so -L/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lcap -lresolv -llz4 /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /lib/libpam.so /lib/libpam_misc.so /home/paralin/buildroot/build/linux-pam-1.3.0/libpam/.libs/libpam.so -ldl /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libkmod.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -lz /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libmount.so /home/paralin/buildroot/build/util-linux-2.31/.libs/libblkid.so /home/paralin/buildroot/build/util-linux-2.31/.libs/libuuid.so -lrt -pthread -Wl,-rpath -Wl,/home/paralin/buildroot/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -Wl,-rpath -Wl,/home/paralin/buildroot/build/linux-pam-1.3.0/libpam/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/build/util-linux-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib /lib/libpam.so: file not recognized: File format not recognized collect2: error: ld returned 1 exit status make[4]: *** [Makefile:12785: systemd-analyze] Error 1 make[4]: *** Waiting for unfinished jobs.... libtool: link: /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style It appears to be explicitly linking against absolute path /lib/libpam.so on my machine. My environment is clean, no LD_PATH modifications or so. Any help is greatly appreciated. I cannot use the newer versions of Buildroot because of this. Thanks, Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-23 7:25 ` Christian Stewart @ 2017-12-23 10:06 ` Waldemar Brodkorb 2017-12-23 20:36 ` Christian Stewart 0 siblings, 1 reply; 24+ messages in thread From: Waldemar Brodkorb @ 2017-12-23 10:06 UTC (permalink / raw) To: buildroot Hi, check config.log where pam_misc is added. May be configure has a bug and detects your host pam under certain conditions. best regards Waldemar > Am 23.12.2017 um 08:25 schrieb Christian Stewart <christian@paral.in>: > > > Hi Waldemar, all, > > Waldemar Brodkorb <wbx@openadk.org> writes: >> can you make the last failing link command more verbose? >> CCLD should be expanded to the full command used. > > I went back and figured out how to make autotools verbose in Buildroot, > so here you are. Note that I am using out-of-tree build mode, like this: > > make -O$(pwd) -C path/to/buildroot > > /bin/sh ./libtool --tag=CC --mode=link /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -pie -o busctl src/busctl/busctl.o src/busctl/busctl-introspect.o libsystemd-shared.la > libtool: link: /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -pie -o systemd-mount src/mount/mount-tool.o ./.libs/libsystemd-shared.so -L/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lcap -lrt -lresolv /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -llz4 /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /home/paralin/buildroot/build/util-linux-2.31/.libs/libuuid.so -pthread -Wl,-rpath -Wl,/home/paralin/buildroot/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -Wl,-rpath -Wl,/home/paralin/buildroot/build/util-linux-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib > libtool: link: /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -I/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libmount -I/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/blkid -I/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/uuid -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -pie -o systemd-analyze src/analyze/systemd_analyze-analyze.o src/analyze/systemd_analyze-analyze-verify.o ./.libs/libcore.a /home/paralin/buildroot/build/systemd-234/.libs/libsystemd-shared.so -L/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lcap -lresolv -llz4 /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /lib/libpam.so /lib/libpam_misc.so /home/paralin/buildroot/build/linux-pam-1.3.0/libpam/.libs/libpam.so -ldl /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libkmod.so /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -lz /home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libmount.so /home/paralin/buildroot/build/util-linux-2.31/.libs/libblkid.so /home/paralin/buildroot/build/util-linux-2.31/.libs/libuuid.so -lrt -pthread -Wl,-rpath -Wl,/home/paralin/buildroot/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -Wl,-rpath -Wl,/home/paralin/buildroot/build/linux-pam-1.3.0/libpam/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/build/util-linux-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib > /lib/libpam.so: file not recognized: File format not recognized > collect2: error: ld returned 1 exit status > make[4]: *** [Makefile:12785: systemd-analyze] Error 1 > make[4]: *** Waiting for unfinished jobs.... > libtool: link: /home/paralin/buildroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style > > It appears to be explicitly linking against absolute path /lib/libpam.so > on my machine. My environment is clean, no LD_PATH modifications or so. > > Any help is greatly appreciated. I cannot use the newer versions of > Buildroot because of this. > > Thanks, > Christian > ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-23 10:06 ` Waldemar Brodkorb @ 2017-12-23 20:36 ` Christian Stewart 2017-12-24 10:38 ` Waldemar Brodkorb 2017-12-24 12:09 ` Waldemar Brodkorb 0 siblings, 2 replies; 24+ messages in thread From: Christian Stewart @ 2017-12-23 20:36 UTC (permalink / raw) To: buildroot Hi Waldemar, Thank you for looking into this- Waldemar Brodkorb <wbx@openadk.org> writes: > check config.log where pam_misc is added. May be configure has a bug and detects your host pam under certain conditions. Seems like it. > PAM_LIBS='-lpam -lpam_misc' Here is the full log: https://gist.githubusercontent.com/paralin/94cd4b80efcce6b419e337eccd534fb9/raw/59a9df0c09bc0ebd9968c7992aa8f608a4bc75ce/systemd-config.log Thanks, Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-23 20:36 ` Christian Stewart @ 2017-12-24 10:38 ` Waldemar Brodkorb 2017-12-24 12:09 ` Waldemar Brodkorb 1 sibling, 0 replies; 24+ messages in thread From: Waldemar Brodkorb @ 2017-12-24 10:38 UTC (permalink / raw) To: buildroot Hi, Christian Stewart wrote, > Hi Waldemar, > > Thank you for looking into this- > > Waldemar Brodkorb <wbx@openadk.org> writes: > > check config.log where pam_misc is added. May be configure has a bug and detects your host pam under certain conditions. > > Seems like it. > > > PAM_LIBS='-lpam -lpam_misc' > Is there a copy of libpam_misc.so somewhere in your buildroot directory? best regards Waldemar ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-23 20:36 ` Christian Stewart 2017-12-24 10:38 ` Waldemar Brodkorb @ 2017-12-24 12:09 ` Waldemar Brodkorb 2017-12-25 1:35 ` Christian Stewart 1 sibling, 1 reply; 24+ messages in thread From: Waldemar Brodkorb @ 2017-12-24 12:09 UTC (permalink / raw) To: buildroot Hi, Christian Stewart wrote, > Hi Waldemar, > > Thank you for looking into this- > > Waldemar Brodkorb <wbx@openadk.org> writes: > > check config.log where pam_misc is added. May be configure has a bug and detects your host pam under certain conditions. > > Seems like it. > > > PAM_LIBS='-lpam -lpam_misc' > I cannot reproduce the problem with your defconfig and br git master. I disabled ccache. Could you try without ccache? Isn't --disable-pam used when you did not enable linux-pam? best regards Waldemar ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-24 12:09 ` Waldemar Brodkorb @ 2017-12-25 1:35 ` Christian Stewart 2017-12-25 15:13 ` Waldemar Brodkorb 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-12-25 1:35 UTC (permalink / raw) To: buildroot Hi Waldemar, There are no extra pam files in my Buildroot tree - before building I ensure this with a "git clean -xfd" and I've searched the tree as well. Waldemar Brodkorb <wbx@openadk.org> writes: > I cannot reproduce the problem with your defconfig and br git > master. It may be something specific to Gentoo? The environment looks clean, so I don't know how Gentoo would affect it, but there's one difference. BR2_COMPILER_PARANOID_UNSAFE_PATH is enabled, shouldn't this catch it? Note, I'm using an external build - $ cd buildroot-src/ $ make O=/home/paralin/buildroot defconfig $ cd /home/paralin/buildroot $ make clean $ make defconfig BR2_DEFCONFIG=$(pwd)/defconfig $ make all > I disabled ccache. Could you try without ccache? With ccache disabled: libtool: link: /home/paralin/builroot/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -I/home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libmount -I/home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/blkid -I/home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/uuid -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -pie -o systemd-analyze src/analyze/systemd_analyze-analyze.o src/analyze/systemd_analyze-analyze-verify.o ./.libs/libcore.a /home/paralin/builroot/build/systemd-234/.libs/libsystemd-shared.so -L/home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lcap -lresolv -llz4 /home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so /home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /lib/libpam.so /lib/libpam_misc.so /home/paralin/builroot/build/linux-pam-1.3.0/libpam/.libs/libpam.so -ldl /home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libkmod.so /home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -lz /home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libmount.so /home/paralin/builroot/build/util-linux-2.31/.libs/libblkid.so /home/paralin/builroot/build/util-linux-2.31/.libs/libuuid.so -lrt -pthread -Wl,-rpath -Wl,/home/paralin/builroot/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -Wl,-rpath -Wl,/home/paralin/builroot/build/linux-pam-1.3.0/libpam/.libs -Wl,-rpath -Wl,/home/paralin/builroot/build/util-linux-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/builroot/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib /lib/libpam.so: file not recognized: File format not recognized collect2: error: ld returned 1 exit status > Isn't --disable-pam used when you did not enable linux-pam? linux-pam is selected by: BR2_PACKAGE_UTIL_LINUX_{LOGIN, RUNUSER, SU} Which I have enabled- here is a full defconfig: BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y BR2_CCACHE=y BR2_OPTIMIZE_2=y BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y BR2_BINUTILS_VERSION_2_27_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_GCC_ENABLE_LTO=y BR2_TARGET_GENERIC_PASSWD_SHA256=y BR2_INIT_SYSTEMD=y BR2_SYSTEM_BIN_SH_BASH=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y BR2_ENABLE_LOCALE_WHITELIST="C en_US en_US.UTF-8" BR2_GENERATE_LOCALE="en_US.UTF-8" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/raspberrypi/linux/archive/a5de96867a1d9a5087129ac61608446919a922ac/linux-rpi-4.9.70-a5de96.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b" BR2_PACKAGE_BZIP2=y BR2_PACKAGE_GZIP=y BR2_PACKAGE_LZ4=y BR2_PACKAGE_UNZIP=y BR2_PACKAGE_XZ=y BR2_PACKAGE_ZIP=y BR2_PACKAGE_LSOF=y BR2_PACKAGE_BINUTILS=y BR2_PACKAGE_GREP=y BR2_PACKAGE_E2FSPROGS=y BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y BR2_PACKAGE_MMC_UTILS=y BR2_PACKAGE_RPI_FIRMWARE=y BR2_PACKAGE_RTL8192CU=y BR2_PACKAGE_USBUTILS=y BR2_PACKAGE_LIBZIP=y BR2_PACKAGE_LZO=y BR2_PACKAGE_CA_CERTIFICATES=y BR2_PACKAGE_LIBSSH=y BR2_PACKAGE_LIBSSH2=y BR2_PACKAGE_LIBCURL=y BR2_PACKAGE_CURL=y BR2_PACKAGE_LIBSEPOL=y BR2_PACKAGE_ETHTOOL=y BR2_PACKAGE_IPUTILS=y BR2_PACKAGE_IW=y BR2_PACKAGE_MOSH=y BR2_PACKAGE_NETWORK_MANAGER=y BR2_PACKAGE_NTP=y BR2_PACKAGE_NTP_NTPDATE=y BR2_PACKAGE_NTP_NTPDC=y BR2_PACKAGE_NTP_NTPQ=y BR2_PACKAGE_RSYNC=y BR2_PACKAGE_WGET=y BR2_PACKAGE_WPA_SUPPLICANT=y BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y BR2_PACKAGE_WPA_SUPPLICANT_EAP=y BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT=y BR2_PACKAGE_WPA_SUPPLICANT_WPS=y BR2_PACKAGE_WPA_SUPPLICANT_CLI=y BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW=y BR2_PACKAGE_FILE=y BR2_PACKAGE_COREUTILS=y # BR2_PACKAGE_SYSTEMD_NETWORKD is not set # BR2_PACKAGE_SYSTEMD_RESOLVED is not set # BR2_PACKAGE_SYSTEMD_TIMEDATED is not set # BR2_PACKAGE_SYSTEMD_TIMESYNCD is not set BR2_PACKAGE_UTIL_LINUX_FALLOCATE=y BR2_PACKAGE_UTIL_LINUX_KILL=y BR2_PACKAGE_UTIL_LINUX_LINE=y BR2_PACKAGE_UTIL_LINUX_LOGIN=y BR2_PACKAGE_UTIL_LINUX_MORE=y BR2_PACKAGE_UTIL_LINUX_NEWGRP=y BR2_PACKAGE_UTIL_LINUX_RFKILL=y BR2_PACKAGE_UTIL_LINUX_SETPRIV=y BR2_PACKAGE_UTIL_LINUX_SU=y BR2_PACKAGE_NANO=y BR2_PACKAGE_VIM=y # BR2_PACKAGE_VIM_RUNTIME is not set BR2_TARGET_ROOTFS_CPIO=y BR2_TARGET_ROOTFS_CPIO_GZIP=y BR2_TARGET_ROOTFS_CPIO_UIMAGE=y # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_E2FSPROGS=y BR2_PACKAGE_HOST_GENEXT2FS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_PARTED=y BR2_PACKAGE_HOST_SQUASHFS=y ... so PAM is enabled on the system. I can try building with it disabled as well, but that would most likely fix it. I need PAM though. Thanks! Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-25 1:35 ` Christian Stewart @ 2017-12-25 15:13 ` Waldemar Brodkorb 2017-12-26 21:50 ` Christian Stewart 0 siblings, 1 reply; 24+ messages in thread From: Waldemar Brodkorb @ 2017-12-25 15:13 UTC (permalink / raw) To: buildroot Hi, Christian Stewart wrote, > Hi Waldemar, > > There are no extra pam files in my Buildroot tree - before building I > ensure this with a "git clean -xfd" and I've searched the tree as well. But that is strange then. find . -name libpam_misc.so\* ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0 ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0.82.1 ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libpam_misc.so.0 ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libpam_misc.so ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libpam_misc.so.0.82.1 ./output/target/usr/lib/libpam_misc.so.0 ./output/target/usr/lib/libpam_misc.so ./output/target/usr/lib/libpam_misc.so.0.82.1 Systemd wants to find libpam, if it is not there it seems to fallback to your native libpam. You should always run "make clean && make" if you make any changes to your .config. best regards Waldemar ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-25 15:13 ` Waldemar Brodkorb @ 2017-12-26 21:50 ` Christian Stewart 2017-12-27 0:55 ` Christian Stewart 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-12-26 21:50 UTC (permalink / raw) To: buildroot Hi Waldemar, Waldemar Brodkorb <wbx@openadk.org> writes: >> There are no extra pam files in my Buildroot tree - before building I >> ensure this with a "git clean -xfd" and I've searched the tree as well. > > But that is strange then. > find . -name libpam_misc.so\* > ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0 > ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so > ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0.82.1 ... please note that I am building out of tree. There are no limpam_misc* inside the "buildroot tree" which includes the main source tree. When the compilation fails, inside my "output tree": $ find -name "libpam_misc.so*" ./build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so ./build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0 ./build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0.82.1 ./target/usr/lib/libpam_misc.so ./target/usr/lib/libpam_misc.so.0 ./target/usr/lib/libpam_misc.so.0.82.1 ./host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libpam_misc.so ./host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libpam_misc.so.0 ./host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libpam_misc.so.0.82.1 > Systemd wants to find libpam, if it is not there it seems to > fallback to your native libpam. Clearly, then, it is not finding the "./target/usr/lib/libpam_misc.so" in "out-of-tree" build. > You should always run "make clean && make" if you make any > changes to your .config. ...I do... Best, Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-26 21:50 ` Christian Stewart @ 2017-12-27 0:55 ` Christian Stewart 2017-12-27 3:05 ` Waldemar Brodkorb 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-12-27 0:55 UTC (permalink / raw) To: buildroot Hi Waldemar, All, Christian Stewart <christian@paral.in> writes: > Hi Waldemar, > > Waldemar Brodkorb <wbx@openadk.org> writes: >>> There are no extra pam files in my Buildroot tree - before building I >>> ensure this with a "git clean -xfd" and I've searched the tree as well. >> >> But that is strange then. >> find . -name libpam_misc.so\* >> ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0 >> ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so >> ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0.82.1 > > ... please note that I am building out of tree. There are no > limpam_misc* inside the "buildroot tree" which includes the main source > tree. When the compilation fails, inside my "output tree": I can confirm now that even in-tree builds result in the same thing: libtool: link: /home/paralin/Documents/buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-sty le-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Wer ror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -Wno-m issing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fstack- protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-se ctions -Wl,--as-needed -Wl,--no-undefined -Wl,-z -Wl,relro -Wl,-z -Wl,now -pie -o systemd-run src/run/run.o ./.libs/libsystemd-shared.so -L/home/paralin/Documents/buildroot/output/host/arm-buildroot -linux-gnueabihf/sysroot/usr/lib -lcap -lrt -lresolv /home/paralin/Documents/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -llz4 /home/paralin/Documents /buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/Documents/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so /home/par alin/Documents/synrobo/skiff/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /home/paralin/Documents/buildroot/output/build/util-linux-2.31/.libs/libuuid.so -pthread - Wl,-rpath -Wl,/home/paralin/Documents/buildroot/output/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/Documents/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -Wl,-rpath -Wl,/home/paralin/Documents/buildroot/output/build/util-linux-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/Documents/buildroot/output/host/arm-buildro ot-linux-gnueabihf/sysroot/usr/lib /lib/libpam.so: file not recognized: File format not recognized collect2: error: ld returned 1 exit status It must be something with how libpam is discovered that is only triggered when on a system with a libpam.so layout like Gentoo's. Any ideas how to go about fixing this? Best, Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-27 0:55 ` Christian Stewart @ 2017-12-27 3:05 ` Waldemar Brodkorb 2017-12-27 5:39 ` Christian Stewart 0 siblings, 1 reply; 24+ messages in thread From: Waldemar Brodkorb @ 2017-12-27 3:05 UTC (permalink / raw) To: buildroot Hi Christian, Christian Stewart wrote, > Hi Waldemar, All, > > Christian Stewart <christian@paral.in> writes: > > Hi Waldemar, > > > > Waldemar Brodkorb <wbx@openadk.org> writes: > >>> There are no extra pam files in my Buildroot tree - before building I > >>> ensure this with a "git clean -xfd" and I've searched the tree as well. > >> > >> But that is strange then. > >> find . -name libpam_misc.so\* > >> ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0 > >> ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so > >> ./output/build/linux-pam-1.3.0/libpam_misc/.libs/libpam_misc.so.0.82.1 > > > > ... please note that I am building out of tree. There are no > > limpam_misc* inside the "buildroot tree" which includes the main source > > tree. When the compilation fails, inside my "output tree": > > I can confirm now that even in-tree builds result in the same thing: .. I believe it is an issue how gcc is calling the linker. In my case I see following: libsystemd-shared.la -lpam -lpam_misc -L/home/wbx/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lkmod So the linker does not get -L before -lpam -lpam_misc pointing to the sysroot. If you start gcc with verbose linker output you see: ./output/host/bin/arm-buildroot-linux-gnueabihf-gcc -Wl,-verbose The included linker script has: SEARCH_DIR("=/home/wbx/buildroot/output/host/arm-buildroot-linux-gnueabihf/lib"); SEARCH_DIR("=/usr/local/lib"); SEARCH_DIR("=/lib"); SEARCH_DIR("=/usr/lib"); In my case on Debian libpam.so is not in the search dirs, but in ls /lib/x86_64-linux-gnu/libpam.so.0* /lib/x86_64-linux-gnu/libpam.so.0 /lib/x86_64-linux-gnu/libpam.so.0.83.1 wbx at helium:~/buildroot$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.9 (jessie) Release: 8.9 Codename: jessie In you case the linker finds libpam.so in /lib and try to use it. To verify my analyzation you can add -L<sysrootpathofyourbr> into: systemd/Makefile PAM_LIBS = -L/home/paralin/buildroot/pi3/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lpam -lpam_misc Like in KMOD_LIBS. Then just continue the build with make V=1 and see if it succeeds. As systemd is switching completely to meson buildsystem a upstreamable patch is not possible. best regards Waldemar ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-27 3:05 ` Waldemar Brodkorb @ 2017-12-27 5:39 ` Christian Stewart 2017-12-27 8:05 ` Waldemar Brodkorb 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-12-27 5:39 UTC (permalink / raw) To: buildroot Hi Waldemar, Waldemar Brodkorb <wbx@openadk.org> writes: > To verify my analyzation you can add -L<sysrootpathofyourbr> into: > systemd/Makefile > PAM_LIBS = > -L/home/paralin/buildroot/pi3/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib > -lpam -lpam_misc > > Like in KMOD_LIBS. Then just continue the build with make V=1 and > see if it succeeds. Did the build, after cleaning, again. After encountering the error, I modified the Makefile as you say: PAM_LIBS = -L/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lpam -lpam_misc And tried to continue the build. I got the same error. I also tried doing a "make clean" inside the systemd build directory and deleting the build and configure stamps to get it to re-configure after the Makefile change, that too did not work. Note that I am using an in-tree build here. > As systemd is switching completely to meson buildsystem a > upstreamable patch is not possible. Hopefully some kind of short-term fix is possible in Buildroot or at least a patch I can apply locally? Here is the error in full, note how /lib/libpam.so is listed as an absolute path: /bin/sh ./libtool --tag=CC --mode=link /home/paralin/buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-str ings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-alia sing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -I/home/paralin/Documents/synrobo/skiff/buildroot-wor k/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libmount -I/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/blkid -I/home/paralin/D ocuments/synrobo/skiff/buildroot-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/uuid -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as -needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -pie -o systemd-analyze src/analyze/systemd_analyze-analyze.o src/analyze/systemd_analyze-analyze-verify.o libcore.la libtool: link: /home/paralin/buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wol d-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter - Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fs tack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -I/home/paralin/buildroot/output/host/arm-buildroot-lin ux-gnueabihf/sysroot/usr/include/libmount -I/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/blkid -I/home/paralin/Documents/synrobo/skiff/buildroo t-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/uuid -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z - Wl,relro -Wl,-z -Wl,now -pie -o systemd-analyze src/analyze/systemd_analyze-analyze.o src/analyze/systemd_analyze-analyze-verify.o ./.libs/libcore.a /home/paralin/buildroot/output/bui ld/systemd-234/.libs/libsystemd-shared.so -L/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lcap -lresolv -llz4 /home/paralin/Documents/synrobo/skiff /buildroot-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /lib/libpam.so /lib/libpam_misc.so /home/paralin/buildroot/o utput/build/linux-pam-1.3.0/libpam/.libs/libpam.so -ldl /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libkmod.so /home/paralin/Documents/synrobo/ski ff/buildroot-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -lz /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libmount.so /home/paralin/buildroot/output/build/util-linux-2.31/.libs/libblkid.so /home/paralin/buildroot/output/build/util-linux-2.31/.libs/libuuid.so -lrt -pthread -Wl,-rpath -Wl,/home/paralin/buildroot/output/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sys root/usr/lib -Wl,-rpath -Wl,/home/paralin/buildroot/output/build/linux-pam-1.3.0/libpam/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/output/build/util-linu x-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib /lib/libpam.so: file not recognized: File format not recognized collect2: error: ld returned 1 exit status make[3]: *** [Makefile:12785: systemd-analyze] Error 1 Thanks, Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-27 5:39 ` Christian Stewart @ 2017-12-27 8:05 ` Waldemar Brodkorb [not found] ` <87o9mkdlf1.fsf@paral.in> 0 siblings, 1 reply; 24+ messages in thread From: Waldemar Brodkorb @ 2017-12-27 8:05 UTC (permalink / raw) To: buildroot Hi Christian, Christian Stewart wrote, > Hi Waldemar, > > Waldemar Brodkorb <wbx@openadk.org> writes: > > To verify my analyzation you can add -L<sysrootpathofyourbr> into: > > systemd/Makefile > > PAM_LIBS = > > -L/home/paralin/buildroot/pi3/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib > > -lpam -lpam_misc > > > > Like in KMOD_LIBS. Then just continue the build with make V=1 and > > see if it succeeds. > > Did the build, after cleaning, again. After encountering the error, I modified the Makefile as you say: > > PAM_LIBS = -L/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lpam -lpam_misc > > And tried to continue the build. I got the same error. I also tried > doing a "make clean" inside the systemd build directory and deleting the > build and configure stamps to get it to re-configure after the Makefile > change, that too did not work. > > Note that I am using an in-tree build here. > > > As systemd is switching completely to meson buildsystem a > > upstreamable patch is not possible. > > Hopefully some kind of short-term fix is possible in Buildroot or at > least a patch I can apply locally? > > Here is the error in full, note how /lib/libpam.so is listed as an > absolute path: > > /bin/sh ./libtool --tag=CC --mode=link /home/paralin/buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op > -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration > -Werror=missing-declarations -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-str > ings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-alia > sing -fvisibility=hidden -fstack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -I/home/paralin/Documents/synrobo/skiff/buildroot-wor > k/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/libmount -I/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/blkid -I/home/paralin/D > ocuments/synrobo/skiff/buildroot-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/uuid -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as > -needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -pie -o systemd-analyze src/analyze/systemd_analyze-analyze.o src/analyze/systemd_analyze-analyze-verify.o libcore.la > libtool: link: /home/paralin/buildroot/output/host/bin/arm-buildroot-linux-gnueabihf-gcc -D__SANE_USERSPACE_TYPES__ -pipe -Wall -Wextra -Wundef -Wlogical-op -Wmissing-include-dirs -Wol > d-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wsuggest-attribute=noreturn -Werror=missing-prototypes -Werror=implicit-function-declaration -Werror=missing-declarations > -Werror=return-type -Werror=incompatible-pointer-types -Werror=format=2 -Wstrict-prototypes -Wredundant-decls -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter - > Wno-missing-field-initializers -Wno-unused-result -Wno-format-signedness -Werror=overflow -Wdate-time -Wnested-externs -ffast-math -fno-common -fdiagnostics-show-option -fno-strict-aliasing -fvisibility=hidden -fs > tack-protector -fstack-protector-strong -fPIE --param=ssp-buffer-size=4 -Werror=shadow -flto -ffunction-sections -fdata-sections -I/home/paralin/buildroot/output/host/arm-buildroot-lin > ux-gnueabihf/sysroot/usr/include/libmount -I/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/blkid -I/home/paralin/Documents/synrobo/skiff/buildroo > t-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/uuid -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-lto -Wl,--gc-sections -Wl,--as-needed -Wl,--no-undefined -Wl,-z - > Wl,relro -Wl,-z -Wl,now -pie -o systemd-analyze src/analyze/systemd_analyze-analyze.o src/analyze/systemd_analyze-analyze-verify.o ./.libs/libcore.a /home/paralin/buildroot/output/bui > ld/systemd-234/.libs/libsystemd-shared.so -L/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -lcap -lresolv -llz4 /home/paralin/Documents/synrobo/skiff > /buildroot-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgcrypt.so /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libgpg-error.so > /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libblkid.so /lib/libpam.so /lib/libpam_misc.so /home/paralin/buildroot/o > utput/build/linux-pam-1.3.0/libpam/.libs/libpam.so -ldl /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libkmod.so /home/paralin/Documents/synrobo/ski > ff/buildroot-work/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblzma.so -lz /home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libmount.so > /home/paralin/buildroot/output/build/util-linux-2.31/.libs/libblkid.so /home/paralin/buildroot/output/build/util-linux-2.31/.libs/libuuid.so -lrt -pthread > -Wl,-rpath -Wl,/home/paralin/buildroot/output/build/systemd-234/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sys > root/usr/lib -Wl,-rpath -Wl,/home/paralin/buildroot/output/build/linux-pam-1.3.0/libpam/.libs -Wl,-rpath -Wl,/home/paralin/buildroot/output/build/util-linu > x-2.31/.libs -Wl,-rpath -Wl,/lib/systemd -Wl,-rpath -Wl,/home/paralin/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib > /lib/libpam.so: file not recognized: File format not recognized > collect2: error: ld returned 1 exit status > make[3]: *** [Makefile:12785: systemd-analyze] Error 1 > There is a mixup of /home/paralin/buildroot and /home/paralin/Documents... . Can you use a clean clone and use intree until we found the problem? Can you do rm -rf output/build/systemd* && make V=1 &>log And sent me the log and the systemd build directory for post-mortem analysis. best regards Waldemar ^ permalink raw reply [flat|nested] 24+ messages in thread
[parent not found: <87o9mkdlf1.fsf@paral.in>]
* [Buildroot] systemd: build failure against pam on arm [not found] ` <87o9mkdlf1.fsf@paral.in> @ 2017-12-28 18:04 ` Waldemar Brodkorb 2017-12-29 19:54 ` Christian Stewart 0 siblings, 1 reply; 24+ messages in thread From: Waldemar Brodkorb @ 2017-12-28 18:04 UTC (permalink / raw) To: buildroot Hi Christian, Christian Stewart wrote, > Sure. To make things less ambiguous, here is exactly what I did to produce > these new results in this email: > > $ cd ~/Documents > $ git clone git://git.busybox.net/buildroot buildroot > $ cd buildroot && git checkout 2017.11 > $ cp ~/Notes/buildroot-pam/defconfig ./defconfig > $ make defconfig BR2_DEFCONFIG=defconfig > $ make # build fails on systemd > $ rm -rf output/build/systemd* > $ make V=1 BR2_JOBS=1 &>systemd-fail.log > $ tar -cvf systemd-fail.tar.gz ./output/build/systemd* > > > Can you do rm -rf output/build/systemd* && make V=1 &>log > > And sent me the log and the systemd build directory for post-mortem > > analysis. > > Attached are defconfig and systemd-fail.log. The archive is too big, so > I uploaded it to Google Drive, available here: > > https://drive.google.com/a/aperturerobotics.com/file/d/1Sxq-5smjUFntRCe0o9zIYs6_--dxjjGA/view?usp=sharing > > Thank you again for taking the time to debug this, I've had this issue > early 2017 and have avoided upgrading Buildroot until we find a fix. Sorry I believe you entered the world of libtool hell. For the hardcore buildroot hackers, if you create a symlink in /lib pointing to libpam.so / libpam_misc.so you can reproduce the issue. By the way, I couldn't reproduce the issue with OpenADK. Unfortunately I can't point to a specific patch. I always pass -Wl,-rpath-link -Wl,$(STAGING_DIR)/usr/lib in LDFLAGS and I always remove any .la files from staging directory. I do not patch the package provided ltmain.sh/libtool stuff like Buildroot, but I always use libtool 2.4.6 with a small patch like this when autoreconfing a package: +++ libtool-2.4.6/m4/libtool.m4 - _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes So sorry, I can't help you out of the hell. best regards Waldemar ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-28 18:04 ` Waldemar Brodkorb @ 2017-12-29 19:54 ` Christian Stewart 2018-02-14 2:55 ` Christian Stewart 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2017-12-29 19:54 UTC (permalink / raw) To: buildroot Hi Waldemar, Waldemar Brodkorb <wbx@openadk.org> writes: >> Thank you again for taking the time to debug this, I've had this issue >> early 2017 and have avoided upgrading Buildroot until we find a fix. > > Sorry I believe you entered the world of libtool hell. > > For the hardcore buildroot hackers, if you create a symlink in /lib > pointing to libpam.so / libpam_misc.so you can reproduce the issue. So there is a bug in libtool / Buildroot after all, when dealing with /lib/libpam.so. I was previously able to bisect it down to a commit upgrading the default Linux headers version, but I can't imagine this is related. > By the way, I couldn't reproduce the issue with OpenADK. > Unfortunately I can't point to a specific patch. > I always pass -Wl,-rpath-link -Wl,$(STAGING_DIR)/usr/lib in > LDFLAGS and I always remove any .la files from staging directory. My libtool knowledge is lacking... Is there a work-around I can apply to force Buildroot to use these LDFLAGS? I could edit the autotools infra I suppose, but this seems like a real hack. > I do not patch the package provided ltmain.sh/libtool stuff like > Buildroot, but I always use libtool 2.4.6 with a small patch > like this when autoreconfing a package: > +++ libtool-2.4.6/m4/libtool.m4 > - _LT_TAGVAR(hardcode_automatic, $1)=no > + _LT_TAGVAR(hardcode_automatic, $1)=yes If I try to change this in libtool in Buildroot: checking whether the C compiler works... no configure: error: in `/home/buildroot/skiff/workspaces/pi3/build/host-libtool-2.4.6': configure: error: C compiler cannot create executables I'm guessing I did it wrong? :) > So sorry, I can't help you out of the hell. Thanks for your help! Best, Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2017-12-29 19:54 ` Christian Stewart @ 2018-02-14 2:55 ` Christian Stewart 2018-02-14 4:57 ` Waldemar Brodkorb 0 siblings, 1 reply; 24+ messages in thread From: Christian Stewart @ 2018-02-14 2:55 UTC (permalink / raw) To: buildroot Hi Waldemar, all, Christian Stewart <christian@paral.in> writes: > Waldemar Brodkorb <wbx@openadk.org> writes: >>> Thank you again for taking the time to debug this, I've had this issue >>> early 2017 and have avoided upgrading Buildroot until we find a fix. >> >> Sorry I believe you entered the world of libtool hell. >> >> For the hardcore buildroot hackers, if you create a symlink in /lib >> pointing to libpam.so / libpam_misc.so you can reproduce the issue. It appears that this bug is fixed in the latest release (2018.02 rc2). Thanks! Christian ^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] systemd: build failure against pam on arm 2018-02-14 2:55 ` Christian Stewart @ 2018-02-14 4:57 ` Waldemar Brodkorb 0 siblings, 0 replies; 24+ messages in thread From: Waldemar Brodkorb @ 2018-02-14 4:57 UTC (permalink / raw) To: buildroot Hi, Christian Stewart wrote, > Hi Waldemar, all, > > > Christian Stewart <christian@paral.in> writes: > > Waldemar Brodkorb <wbx@openadk.org> writes: > >>> Thank you again for taking the time to debug this, I've had this issue > >>> early 2017 and have avoided upgrading Buildroot until we find a fix. > >> > >> Sorry I believe you entered the world of libtool hell. > >> > >> For the hardcore buildroot hackers, if you create a symlink in /lib > >> pointing to libpam.so / libpam_misc.so you can reproduce the issue. > > It appears that this bug is fixed in the latest release (2018.02 rc2). Sure, a nice side effect of the switch to meson by upstream, which eliminates libtool ;) best regards Waldemar ^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2018-02-14 4:57 UTC | newest] Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-06-01 2:29 [Buildroot] systemd: build failure against pam on arm Christian Stewart 2017-06-01 18:36 ` Christian Stewart 2017-06-01 22:03 ` Peter Korsgaard 2017-06-01 23:35 ` Christian Stewart 2017-06-03 2:48 ` Christian Stewart 2017-06-03 10:54 ` Waldemar Brodkorb 2017-12-19 23:26 ` Christian Stewart 2017-12-20 0:31 ` Christian Stewart 2017-12-23 7:25 ` Christian Stewart 2017-12-23 10:06 ` Waldemar Brodkorb 2017-12-23 20:36 ` Christian Stewart 2017-12-24 10:38 ` Waldemar Brodkorb 2017-12-24 12:09 ` Waldemar Brodkorb 2017-12-25 1:35 ` Christian Stewart 2017-12-25 15:13 ` Waldemar Brodkorb 2017-12-26 21:50 ` Christian Stewart 2017-12-27 0:55 ` Christian Stewart 2017-12-27 3:05 ` Waldemar Brodkorb 2017-12-27 5:39 ` Christian Stewart 2017-12-27 8:05 ` Waldemar Brodkorb [not found] ` <87o9mkdlf1.fsf@paral.in> 2017-12-28 18:04 ` Waldemar Brodkorb 2017-12-29 19:54 ` Christian Stewart 2018-02-14 2:55 ` Christian Stewart 2018-02-14 4:57 ` Waldemar Brodkorb
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.