[U-Boot] [PATCH v3 0/6] arm: ti: misc updates and bug fixes

[U-Boot] [PATCH v3 0/6] arm: ti: misc updates and bug fixes

[Lokesh Vutla]

This series consolidates few bug fixes on TI platforms.

Changes since v2:
- Added a new patch for making in file structures static.

Lokesh Vutla (4):
  configs: k2g_evm: Allocate more space for u-boot
  tools: omapimage: Fix mismatch of image size in header
  arm: am33xx: Avoid writing into reserved DPLL divider
  board: ti: k2g: Make ddr3* declarations as static

Rex Chang (1):
  board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support

Tomi Valkeinen (1):
  board: ti: dra76: mux wakeup2 as gpio1_2

 arch/arm/mach-keystone/include/mach/hardware.h |  3 ++
 arch/arm/mach-keystone/init.c                  | 17 ++++++-
 arch/arm/mach-omap2/am33xx/clock_am33xx.c      | 12 ++---
 board/ti/dra7xx/mux_data.h                     |  2 +-
 board/ti/ks2_evm/board.h                       |  4 ++
 board/ti/ks2_evm/board_k2g.c                   | 32 ++++++++++---
 board/ti/ks2_evm/ddr3_k2g.c                    | 65 +++++++++++++++++++++++---
 board/ti/ks2_evm/mux-k2g.h                     |  2 +-
 include/configs/k2g_evm.h                      |  6 ++-
 tools/omapimage.c                              |  2 +-
 10 files changed, 119 insertions(+), 26 deletions(-)

-- 
2.15.1

[U-Boot] [PATCH v3 1/6] configs: k2g_evm: Allocate more space for u-boot

[Lokesh Vutla]

Now that we have multi dtb enabled in u-boot allocate
128K space for u-boot.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 include/configs/k2g_evm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index df81c09d86..9282a22739 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -74,7 +74,7 @@
 #endif
 
 /* SPL SPI Loader Configuration */
-#define CONFIG_SPL_TEXT_BASE		0x0c080000
+#define CONFIG_SPL_TEXT_BASE		0x0c0a0000
 
 /* NAND Configuration */
 #define CONFIG_SYS_NAND_PAGE_2K
-- 
2.15.1

[U-Boot] [PATCH v3 2/6] board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support

[Lokesh Vutla]

From: Rex Chang <rchang@ti.com>

Added support for K2G EVM with FlipChip SoC of which
ARM/DDR3 runs at 1GHz/1066 MT/s. The patch is also
backward compatible with old revision EVM and EVM
with WireBond SoC. Their ARM/DDR3 run at 600MHz/800 MT/s.

The new SoC supports 2 different speeds at 1GHz and 600MHz.
Modyfied the CPU Name to show which SoC is used in the EVM.
Modified the DDR3 configuration to reflect New SoC supports
2 different CPU and DDR3 speeds, 1GHz/1066MT and 600MHz/800MT.

Added new inline function board_it_k2g_g1() for the new FlipChip 1GHz,
and set the u-boot env variable board_name accordingly.

Modified findfdt script in u-boot environment variable to include new k2g board type.

Signed-off-by: Rex Chang <rchang@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-keystone/include/mach/hardware.h |  3 ++
 arch/arm/mach-keystone/init.c                  | 17 +++++++-
 board/ti/ks2_evm/board.h                       |  4 ++
 board/ti/ks2_evm/board_k2g.c                   | 32 +++++++++++----
 board/ti/ks2_evm/ddr3_k2g.c                    | 57 +++++++++++++++++++++++++-
 board/ti/ks2_evm/mux-k2g.h                     |  2 +-
 include/configs/k2g_evm.h                      |  4 +-
 7 files changed, 106 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-keystone/include/mach/hardware.h b/arch/arm/mach-keystone/include/mach/hardware.h
index 6629406870..5d08418eb9 100644
--- a/arch/arm/mach-keystone/include/mach/hardware.h
+++ b/arch/arm/mach-keystone/include/mach/hardware.h
@@ -327,6 +327,9 @@ typedef volatile unsigned int   *dv_reg_p;
 #define CPU_66AK2Lx	0xb9a7
 #define CPU_66AK2Gx	0xbb06
 
+/* Variant definitions */
+#define CPU_66AK2G1x	0x08
+
 /* DEVSPEED register */
 #define DEVSPEED_DEVSPEED_SHIFT	16
 #define DEVSPEED_DEVSPEED_MASK	(0xfff << 16)
diff --git a/arch/arm/mach-keystone/init.c b/arch/arm/mach-keystone/init.c
index 6e5a1e1af1..f9c03f1dd1 100644
--- a/arch/arm/mach-keystone/init.c
+++ b/arch/arm/mach-keystone/init.c
@@ -229,7 +229,19 @@ int print_cpuinfo(void)
 		puts("66AK2Ex SR");
 		break;
 	case CPU_66AK2Gx:
-		puts("66AK2Gx SR");
+		puts("66AK2Gx");
+#ifdef CONFIG_SOC_K2G
+		{
+			int speed = get_max_arm_speed(speeds);
+			if (speed == SPD1000)
+				puts("-100 ");
+			else if (speed == SPD600)
+				puts("-60 ");
+			else
+				puts("-xx ");
+		}
+#endif
+		puts("SR");
 		break;
 	default:
 		puts("Unknown\n");
@@ -241,7 +253,8 @@ int print_cpuinfo(void)
 		puts("1.1\n");
 	else if (rev == 0)
 		puts("1.0\n");
-
+	else if (rev == 8)
+		puts("1.0\n");
 	return 0;
 }
 #endif
diff --git a/board/ti/ks2_evm/board.h b/board/ti/ks2_evm/board.h
index b3ad1881fa..48d60a1c74 100644
--- a/board/ti/ks2_evm/board.h
+++ b/board/ti/ks2_evm/board.h
@@ -20,6 +20,10 @@ static inline int board_is_k2g_gp(void)
 {
 	return board_ti_is("66AK2GGP");
 }
+static inline int board_is_k2g_g1(void)
+{
+	return board_ti_is("66AK2GG1");
+}
 static inline int board_is_k2g_ice(void)
 {
 	return board_ti_is("66AK2GIC");
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 01328f1955..88df419b10 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -55,7 +55,7 @@ unsigned int get_external_clk(u32 clk)
 	return clk_freq;
 }
 
-static int arm_speeds[DEVSPEED_NUMSPDS] = {
+int speeds[DEVSPEED_NUMSPDS] = {
 	SPD400,
 	SPD600,
 	SPD800,
@@ -159,13 +159,20 @@ static struct pll_init_data nss_pll_config[MAX_SYSCLK] = {
 	[SYSCLK_26MHz] = {NSS_PLL, 1000, 13, 2},
 };
 
-static struct pll_init_data ddr3_pll_config[MAX_SYSCLK] = {
+static struct pll_init_data ddr3_pll_config_800[MAX_SYSCLK] = {
 	[SYSCLK_19MHz] = {DDR3A_PLL, 167, 1, 16},
 	[SYSCLK_24MHz] = {DDR3A_PLL, 133, 1, 16},
 	[SYSCLK_25MHz] = {DDR3A_PLL, 128, 1, 16},
 	[SYSCLK_26MHz] = {DDR3A_PLL, 123, 1, 16},
 };
 
+static struct pll_init_data ddr3_pll_config_1066[MAX_SYSCLK] = {
+	[SYSCLK_19MHz] = {DDR3A_PLL, 194, 1, 14},
+	[SYSCLK_24MHz] = {DDR3A_PLL, 156, 1, 14},
+	[SYSCLK_25MHz] = {DDR3A_PLL, 149, 1, 14},
+	[SYSCLK_26MHz] = {DDR3A_PLL, 144, 1, 14},
+};
+
 struct pll_init_data *get_pll_init_data(int pll)
 {
 	int speed;
@@ -178,7 +185,7 @@ struct pll_init_data *get_pll_init_data(int pll)
 		data = &main_pll_config[sysclk_index][speed];
 		break;
 	case TETRIS_PLL:
-		speed = get_max_arm_speed(arm_speeds);
+		speed = get_max_arm_speed(speeds);
 		data = &tetris_pll_config[sysclk_index][speed];
 		break;
 	case NSS_PLL:
@@ -188,7 +195,15 @@ struct pll_init_data *get_pll_init_data(int pll)
 		data = &uart_pll_config[sysclk_index];
 		break;
 	case DDR3_PLL:
-		data = &ddr3_pll_config[sysclk_index];
+		if (cpu_revision() & CPU_66AK2G1x) {
+			speed = get_max_arm_speed(speeds);
+			if (speed == SPD1000)
+				data = &ddr3_pll_config_1066[sysclk_index];
+			else
+				data = &ddr3_pll_config_800[sysclk_index];
+		} else {
+			data = &ddr3_pll_config_800[sysclk_index];
+		}
 		break;
 	default:
 		data = NULL;
@@ -209,7 +224,7 @@ int board_mmc_init(bd_t *bis)
 		return -1;
 	}
 
-	if (board_is_k2g_gp())
+	if (board_is_k2g_gp() || board_is_k2g_g1())
 		omap_mmc_init(0, 0, 0, -1, -1);
 
 	omap_mmc_init(1, 0, 0, -1, -1);
@@ -224,7 +239,8 @@ int board_fit_config_name_match(const char *name)
 
 	if (!strcmp(name, "keystone-k2g-generic") && !eeprom_read)
 		return 0;
-	else if (!strcmp(name, "keystone-k2g-evm") && board_ti_is("66AK2GGP"))
+	else if (!strcmp(name, "keystone-k2g-evm") &&
+		(board_ti_is("66AK2GGP") || board_ti_is("66AK2GG1")))
 		return 0;
 	else if (!strcmp(name, "keystone-k2g-ice") && board_ti_is("66AK2GIC"))
 		return 0;
@@ -283,7 +299,7 @@ int embedded_dtb_select(void)
 
 	k2g_reset_mux_config();
 
-	if (board_is_k2g_gp()) {
+	if (board_is_k2g_gp() || board_is_k2g_g1()) {
 		/* deassert FLASH_HOLD */
 		clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
 			     BIT(9));
@@ -312,6 +328,8 @@ int board_late_init(void)
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 	if (board_is_k2g_gp())
 		env_set("board_name", "66AK2GGP\0");
+	else if (board_is_k2g_g1())
+		env_set("board_name", "66AK2GG1\0");
 	else if (board_is_k2g_ice())
 		env_set("board_name", "66AK2GIC\0");
 #endif
diff --git a/board/ti/ks2_evm/ddr3_k2g.c b/board/ti/ks2_evm/ddr3_k2g.c
index 44db335580..6f6fce6a24 100644
--- a/board/ti/ks2_evm/ddr3_k2g.c
+++ b/board/ti/ks2_evm/ddr3_k2g.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include "ddr3_cfg.h"
 #include <asm/arch/ddr3.h>
+#include <asm/arch/hardware.h>
 #include "board.h"
 
 /* K2G GP EVM DDR3 Configuration */
@@ -53,6 +54,46 @@ struct ddr3_phy_config ddr3phy_800_2g = {
 	.pir_v2         = 0x00000F81ul,
 };
 
+static struct ddr3_phy_config ddr3phy_1066_2g = {
+	.pllcr          = 0x000DC000ul,
+	.pgcr1_mask     = (IODDRM_MASK | ZCKSEL_MASK),
+	.pgcr1_val      = ((1 << 2) | (2 << 7) | (1 << 23)),
+	.ptr0           = 0x42C21590ul,
+	.ptr1           = 0xD05612C0ul,
+	.ptr2           = 0,
+	.ptr3           = 0x0904111Dul,
+	.ptr4           = 0x0859A072ul,
+	.dcr_mask       = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK),
+	.dcr_val        = ((1 << 10)),
+	.dtpr0          = 0x6D147744ul,
+	.dtpr1          = 0x32845A80ul,
+	.dtpr2          = 0x50023600ul,
+	.mr0            = 0x00001830ul,
+	.mr1            = 0x00000006ul,
+	.mr2            = 0x00000000ul,
+	.dtcr           = 0x710035C7ul,
+	.pgcr2          = 0x00F05159ul,
+	.zq0cr1         = 0x0001005Dul,
+	.zq1cr1         = 0x0001005Bul,
+	.zq2cr1         = 0x0001005Bul,
+	.pir_v1         = 0x00000033ul,
+	.datx8_2_mask   = 0,
+	.datx8_2_val    = 0,
+	.datx8_3_mask   = 0,
+	.datx8_3_val    = 0,
+	.datx8_4_mask   = 0,
+	.datx8_4_val    = ((1 << 0)),
+	.datx8_5_mask   = DXEN_MASK,
+	.datx8_5_val    = 0,
+	.datx8_6_mask   = DXEN_MASK,
+	.datx8_6_val    = 0,
+	.datx8_7_mask   = DXEN_MASK,
+	.datx8_7_val    = 0,
+	.datx8_8_mask   = DXEN_MASK,
+	.datx8_8_val    = 0,
+	.pir_v2         = 0x00000F81ul,
+};
+
 struct ddr3_emif_config ddr3_800_2g = {
 	.sdcfg          = 0x62005662ul,
 	.sdtim1         = 0x0A385033ul,
@@ -63,6 +104,16 @@ struct ddr3_emif_config ddr3_800_2g = {
 	.sdrfc          = 0x00000C34ul,
 };
 
+struct ddr3_emif_config ddr3_1066_2g = {
+	.sdcfg          = 0x62005662ul,
+	.sdtim1         = 0x0E4C6843ul,
+	.sdtim2         = 0x00001CC6ul,
+	.sdtim3         = 0x323DFF32ul,
+	.sdtim4         = 0x533F08AFul,
+	.zqcfg          = 0x70073200ul,
+	.sdrfc          = 0x00001044ul,
+};
+
 /* K2G ICE evm DDR3 Configuration */
 struct ddr3_phy_config ddr3phy_800_512mb = {
 	.pllcr          = 0x000DC000ul,
@@ -118,8 +169,10 @@ u32 ddr3_init(void)
 {
 	/* Reset DDR3 PHY after PLL enabled */
 	ddr3_reset_ddrphy();
-
-	if (board_is_k2g_gp()) {
+	if (board_is_k2g_g1()) {
+		ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1066_2g);
+		ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_1066_2g);
+	} else if (board_is_k2g_gp()) {
 		ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_800_2g);
 		ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &ddr3_800_2g);
 	} else if (board_is_k2g_ice()) {
diff --git a/board/ti/ks2_evm/mux-k2g.h b/board/ti/ks2_evm/mux-k2g.h
index 630103d0ff..9e3fa11003 100644
--- a/board/ti/ks2_evm/mux-k2g.h
+++ b/board/ti/ks2_evm/mux-k2g.h
@@ -345,7 +345,7 @@ void k2g_mux_config(void)
 {
 	if (!board_ti_was_eeprom_read()) {
 		configure_pin_mux(k2g_generic_pin_cfg);
-	} else if (board_is_k2g_gp()) {
+	} else if (board_is_k2g_gp() || board_is_k2g_g1()) {
 		configure_pin_mux(k2g_evm_pin_cfg);
 	} else if (board_is_k2g_ice()) {
 		configure_pin_mux(k2g_ice_evm_pin_cfg);
diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index 9282a22739..4e43104fac 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -34,11 +34,13 @@
 	"findfdt="\
 		"if test $board_name = 66AK2GGP; then " \
 			 "setenv name_fdt keystone-k2g-evm.dtb; " \
+		"else if test $board_name = 66AK2GG1; then " \
+			"setenv name_fdt keystone-k2g-evm.dtb; " \
 		"else if test $board_name = 66AK2GIC; then " \
 			 "setenv name_fdt keystone-k2g-ice.dtb; " \
 		"else if test $name_fdt = undefined; then " \
 			"echo WARNING: Could not determine device tree to use;"\
-		"fi;fi;fi; setenv fdtfile ${name_fdt}\0" \
+		"fi;fi;fi;fi; setenv fdtfile ${name_fdt}\0" \
 	"name_mon=skern-k2g.bin\0"					\
 	"name_ubi=k2g-evm-ubifs.ubi\0"					\
 	"name_uboot=u-boot-spi-k2g-evm.gph\0"				\
-- 
2.15.1

[U-Boot] [PATCH v3 3/6] tools: omapimage: Fix mismatch of image size in header

[Lokesh Vutla]

The size field in GP header that is expected by ROM is size of the
image + size of the header. But omapimage tool is updating size
as image size + 2 * header size. Remove this extra header size bytes.

Reported-by: Denys Dmytriyenko <denys@ti.com>
Debugged-by: Madan Srinivas <madans@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 tools/omapimage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/omapimage.c b/tools/omapimage.c
index e7c46388f4..01e02649e1 100644
--- a/tools/omapimage.c
+++ b/tools/omapimage.c
@@ -145,7 +145,7 @@ static void omapimage_set_header(void *ptr, struct stat *sbuf, int ifd,
 	toc++;
 	memset(toc, 0xff, sizeof(*toc));
 
-	gph_set_header(gph, sbuf->st_size - OMAP_CH_HDR_SIZE + GPIMAGE_HDR_SIZE,
+	gph_set_header(gph, sbuf->st_size - OMAP_CH_HDR_SIZE,
 		       params->addr, 0);
 
 	if (strncmp(params->imagename, "byteswap", 8) == 0) {
-- 
2.15.1

[U-Boot] [PATCH v3 4/6] arm: am33xx: Avoid writing into reserved DPLL divider

[Lokesh Vutla]

DPLL DRR doesn't have an M4 divider. But the clock driver is trying
to configure M4 divider as 4(writing into a reserved register).
Fixing it by making M4 divider as -1.

Reported-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-omap2/am33xx/clock_am33xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/am33xx/clock_am33xx.c b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
index 1780bbdb6f..2352c37822 100644
--- a/arch/arm/mach-omap2/am33xx/clock_am33xx.c
+++ b/arch/arm/mach-omap2/am33xx/clock_am33xx.c
@@ -109,22 +109,22 @@ const struct dpll_params dpll_per_192MHz[NUM_CRYSTAL_FREQ] = {
 const struct dpll_params dpll_ddr3_303MHz[NUM_CRYSTAL_FREQ] = {
 		{505, 15, 2, -1, -1, -1, -1}, /*19.2*/
 		{101, 3, 2, -1, -1, -1, -1}, /* 24 MHz */
-		{303, 24, 1, -1, 4, -1, -1}, /* 25 MHz */
-		{303, 12, 2, -1, 4, -1, -1}  /* 26 MHz */
+		{303, 24, 1, -1, -1, -1, -1}, /* 25 MHz */
+		{303, 12, 2, -1, -1, -1, -1}  /* 26 MHz */
 };
 
 const struct dpll_params dpll_ddr3_400MHz[NUM_CRYSTAL_FREQ] = {
 		{125, 5, 1, -1, -1, -1, -1}, /*19.2*/
 		{50, 2, 1, -1, -1, -1, -1}, /* 24 MHz */
-		{16, 0, 1, -1, 4, -1, -1}, /* 25 MHz */
-		{200, 12, 1, -1, 4, -1, -1}  /* 26 MHz */
+		{16, 0, 1, -1, -1, -1, -1}, /* 25 MHz */
+		{200, 12, 1, -1, -1, -1, -1}  /* 26 MHz */
 };
 
 const struct dpll_params dpll_ddr2_266MHz[NUM_CRYSTAL_FREQ] = {
 		{665, 47, 1, -1, -1, -1, -1}, /*19.2*/
 		{133, 11, 1, -1, -1, -1, -1}, /* 24 MHz */
-		{266, 24, 1, -1, 4, -1, -1}, /* 25 MHz */
-		{133, 12, 1, -1, 4, -1, -1}  /* 26 MHz */
+		{266, 24, 1, -1, -1, -1, -1}, /* 25 MHz */
+		{133, 12, 1, -1, -1, -1, -1}  /* 26 MHz */
 };
 
 __weak const struct dpll_params *get_dpll_mpu_params(void)
-- 
2.15.1

[U-Boot] [PATCH v3 5/6] board: ti: dra76: mux wakeup2 as gpio1_2

[Lokesh Vutla]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

gpio1_2 is used for HPD interrupt with DRA76's DVI add-on board, so mux
the pin as gpio and PIN_INPUT.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 board/ti/dra7xx/mux_data.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 3c3a19a0e1..b5dcaa584a 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -882,7 +882,7 @@ const struct pad_conf_entry dra76x_core_padconf_array[] = {
 	{I2C2_SCL, (M1 | PIN_INPUT_PULLUP)},	/* i2c2_scl.hdmi1_ddc_sda */
 	{WAKEUP0, (M14 | PIN_OUTPUT)},	/* N/A.gpio1_0 */
 	{WAKEUP1, (M14 | PIN_OUTPUT)},	/* N/A.gpio1_1 */
-	{WAKEUP2, (M1 | PIN_OUTPUT)},	/* N/A.sys_nirq2 */
+	{WAKEUP2, (M14 | PIN_INPUT)},	/* N/A.gpio1_2 */
 	{WAKEUP3, (M1 | PIN_OUTPUT)},	/* N/A.sys_nirq1 */
 };
 
-- 
2.15.1

[U-Boot] [PATCH v3 6/6] board: ti: k2g: Make ddr3* declarations as static

[Lokesh Vutla]

All ddr3_emif declarations are not used outside ddr3_k2g.c
file. So make all of them as static.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/ks2_evm/ddr3_k2g.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/board/ti/ks2_evm/ddr3_k2g.c b/board/ti/ks2_evm/ddr3_k2g.c
index 6f6fce6a24..3398246e28 100644
--- a/board/ti/ks2_evm/ddr3_k2g.c
+++ b/board/ti/ks2_evm/ddr3_k2g.c
@@ -14,7 +14,7 @@
 #include "board.h"
 
 /* K2G GP EVM DDR3 Configuration */
-struct ddr3_phy_config ddr3phy_800_2g = {
+static struct ddr3_phy_config ddr3phy_800_2g = {
 	.pllcr          = 0x000DC000ul,
 	.pgcr1_mask     = (IODDRM_MASK | ZCKSEL_MASK),
 	.pgcr1_val      = ((1 << 2) | (1 << 7) | (1 << 23)),
@@ -94,7 +94,7 @@ static struct ddr3_phy_config ddr3phy_1066_2g = {
 	.pir_v2         = 0x00000F81ul,
 };
 
-struct ddr3_emif_config ddr3_800_2g = {
+static struct ddr3_emif_config ddr3_800_2g = {
 	.sdcfg          = 0x62005662ul,
 	.sdtim1         = 0x0A385033ul,
 	.sdtim2         = 0x00001CA5ul,
@@ -104,7 +104,7 @@ struct ddr3_emif_config ddr3_800_2g = {
 	.sdrfc          = 0x00000C34ul,
 };
 
-struct ddr3_emif_config ddr3_1066_2g = {
+static struct ddr3_emif_config ddr3_1066_2g = {
 	.sdcfg          = 0x62005662ul,
 	.sdtim1         = 0x0E4C6843ul,
 	.sdtim2         = 0x00001CC6ul,
@@ -115,7 +115,7 @@ struct ddr3_emif_config ddr3_1066_2g = {
 };
 
 /* K2G ICE evm DDR3 Configuration */
-struct ddr3_phy_config ddr3phy_800_512mb = {
+static struct ddr3_phy_config ddr3phy_800_512mb = {
 	.pllcr          = 0x000DC000ul,
 	.pgcr1_mask     = (IODDRM_MASK | ZCKSEL_MASK),
 	.pgcr1_val      = ((1 << 2) | (2 << 7) | (1 << 23)),
@@ -155,7 +155,7 @@ struct ddr3_phy_config ddr3phy_800_512mb = {
 	.pir_v2         = 0x00000F81ul,
 };
 
-struct ddr3_emif_config ddr3_800_512mb = {
+static struct ddr3_emif_config ddr3_800_512mb = {
 	.sdcfg          = 0x62006662ul,
 	.sdtim1         = 0x0A385033ul,
 	.sdtim2         = 0x00001CA5ul,
-- 
2.15.1

[U-Boot] [PATCH v3 6/6] board: ti: k2g: Make ddr3* declarations as static

[Tom Rini]

On Thu, Dec 28, 2017 at 08:40:03PM +0530, Lokesh Vutla wrote:

> All ddr3_emif declarations are not used outside ddr3_k2g.c
> file. So make all of them as static.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180101/1c656e22/attachment.sig>

[U-Boot] [PATCH v3 0/6] arm: ti: misc updates and bug fixes

[Lokesh Vutla]

On Thursday 28 December 2017 08:39 PM, Lokesh Vutla wrote:
> This series consolidates few bug fixes on TI platforms.

Gentle Ping. If there are no further comments, can this series be merged ?

Thanks and regards,
Lokesh

> 
> Changes since v2:
> - Added a new patch for making in file structures static.
> 
> Lokesh Vutla (4):
>   configs: k2g_evm: Allocate more space for u-boot
>   tools: omapimage: Fix mismatch of image size in header
>   arm: am33xx: Avoid writing into reserved DPLL divider
>   board: ti: k2g: Make ddr3* declarations as static
> 
> Rex Chang (1):
>   board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support
> 
> Tomi Valkeinen (1):
>   board: ti: dra76: mux wakeup2 as gpio1_2
> 
>  arch/arm/mach-keystone/include/mach/hardware.h |  3 ++
>  arch/arm/mach-keystone/init.c                  | 17 ++++++-
>  arch/arm/mach-omap2/am33xx/clock_am33xx.c      | 12 ++---
>  board/ti/dra7xx/mux_data.h                     |  2 +-
>  board/ti/ks2_evm/board.h                       |  4 ++
>  board/ti/ks2_evm/board_k2g.c                   | 32 ++++++++++---
>  board/ti/ks2_evm/ddr3_k2g.c                    | 65 +++++++++++++++++++++++---
>  board/ti/ks2_evm/mux-k2g.h                     |  2 +-
>  include/configs/k2g_evm.h                      |  6 ++-
>  tools/omapimage.c                              |  2 +-
>  10 files changed, 119 insertions(+), 26 deletions(-)
> 

[U-Boot] [U-Boot, v3, 1/6] configs: k2g_evm: Allocate more space for u-boot

[Tom Rini]

On Thu, Dec 28, 2017 at 08:39:58PM +0530, Lokesh Vutla wrote:

> Now that we have multi dtb enabled in u-boot allocate
> 128K space for u-boot.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180119/a140c150/attachment.sig>

[U-Boot] [U-Boot, v3, 2/6] board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support

[Tom Rini]

On Thu, Dec 28, 2017 at 08:39:59PM +0530, Lokesh Vutla wrote:

> From: Rex Chang <rchang@ti.com>
> 
> Added support for K2G EVM with FlipChip SoC of which
> ARM/DDR3 runs at 1GHz/1066 MT/s. The patch is also
> backward compatible with old revision EVM and EVM
> with WireBond SoC. Their ARM/DDR3 run at 600MHz/800 MT/s.
> 
> The new SoC supports 2 different speeds at 1GHz and 600MHz.
> Modyfied the CPU Name to show which SoC is used in the EVM.
> Modified the DDR3 configuration to reflect New SoC supports
> 2 different CPU and DDR3 speeds, 1GHz/1066MT and 600MHz/800MT.
> 
> Added new inline function board_it_k2g_g1() for the new FlipChip 1GHz,
> and set the u-boot env variable board_name accordingly.
> 
> Modified findfdt script in u-boot environment variable to include new k2g board type.
> 
> Signed-off-by: Rex Chang <rchang@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180119/56092578/attachment.sig>

[U-Boot] [U-Boot, v3, 3/6] tools: omapimage: Fix mismatch of image size in header

[Tom Rini]

On Thu, Dec 28, 2017 at 08:40:00PM +0530, Lokesh Vutla wrote:

> The size field in GP header that is expected by ROM is size of the
> image + size of the header. But omapimage tool is updating size
> as image size + 2 * header size. Remove this extra header size bytes.
> 
> Reported-by: Denys Dmytriyenko <denys@ti.com>
> Debugged-by: Madan Srinivas <madans@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180119/6d0efb63/attachment.sig>

[U-Boot] [U-Boot, v3, 4/6] arm: am33xx: Avoid writing into reserved DPLL divider

[Tom Rini]

On Thu, Dec 28, 2017 at 08:40:01PM +0530, Lokesh Vutla wrote:

> DPLL DRR doesn't have an M4 divider. But the clock driver is trying
> to configure M4 divider as 4(writing into a reserved register).
> Fixing it by making M4 divider as -1.
> 
> Reported-by: Steve Kipisz <s-kipisz2@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180119/296b71e4/attachment.sig>

[U-Boot] [U-Boot, v3, 5/6] board: ti: dra76: mux wakeup2 as gpio1_2

[Tom Rini]

On Thu, Dec 28, 2017 at 08:40:02PM +0530, Lokesh Vutla wrote:

> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> gpio1_2 is used for HPD interrupt with DRA76's DVI add-on board, so mux
> the pin as gpio and PIN_INPUT.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180119/23067ce9/attachment.sig>

[U-Boot] [U-Boot, v3, 6/6] board: ti: k2g: Make ddr3* declarations as static

[Tom Rini]

On Thu, Dec 28, 2017 at 08:40:03PM +0530, Lokesh Vutla wrote:

> All ddr3_emif declarations are not used outside ddr3_k2g.c
> file. So make all of them as static.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180119/e113f5cb/attachment.sig>