[PATCH v3 0/6] Add dynamic ftrace support for RISC-V platforms

[PATCH v3 0/6] Add dynamic ftrace support for RISC-V platforms

[Alan Kao]

This patch set includes the building blocks of dynamic ftrace features
for RISC-V machines.

Changes in v3:
 - Replace the nops at the tracer call sites into a "call ftrace_stub"
   instruction for better understanding (1/6 and 2/6)

Changes in v2:
 - Fix the return value as writing to kernel text goes wrong (2/6)
 - Replace manual comparisons by calling memcmp (2/6)
 - Simplify the conditional assignment in the Makefile (1/6)

Alan Kao (6):
  riscv/ftrace: Add RECORD_MCOUNT support
  riscv/ftrace: Add dynamic function tracer support
  riscv/ftrace: Add dynamic function graph tracer support
  riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
  riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
  riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support

 arch/riscv/Kconfig              |   3 +
 arch/riscv/Makefile             |   3 +
 arch/riscv/include/asm/ftrace.h |  47 ++++++++
 arch/riscv/kernel/Makefile      |   5 +-
 arch/riscv/kernel/ftrace.c      | 142 ++++++++++++++++++++++-
 arch/riscv/kernel/mcount-dyn.S  | 241 ++++++++++++++++++++++++++++++++++++++++
 arch/riscv/kernel/mcount.S      |  22 ++--
 arch/riscv/kernel/stacktrace.c  |   6 +
 scripts/recordmcount.pl         |   5 +
 9 files changed, 461 insertions(+), 13 deletions(-)
 create mode 100644 arch/riscv/kernel/mcount-dyn.S

-- 
2.15.1

[PATCH v3 1/6] riscv/ftrace: Add RECORD_MCOUNT support

[Alan Kao]

Now recordmcount.pl recognizes RISC-V object files. For the mechanism to
work, we have to disable the linker relaxation.

Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
---
 arch/riscv/Kconfig      | 1 +
 arch/riscv/Makefile     | 3 +++
 scripts/recordmcount.pl | 5 +++++
 3 files changed, 9 insertions(+)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 40a67fc12328..1f45a76f412e 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -117,6 +117,7 @@ config ARCH_RV64I
 	select 64BIT
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FTRACE_MCOUNT_RECORD
 
 endchoice
 
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 6719dd30ec5b..899226e0da7d 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -11,6 +11,9 @@
 LDFLAGS         :=
 OBJCOPYFLAGS    := -O binary
 LDFLAGS_vmlinux :=
+ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
+	LDFLAGS_vmlinux := --no-relax
+endif
 KBUILD_AFLAGS_MODULE += -fPIC
 KBUILD_CFLAGS_MODULE += -fPIC
 
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 2033af758173..d44d55db7c06 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -376,6 +376,11 @@ if ($arch eq "x86_64") {
     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s__mcount\$";
     $type = ".quad";
     $alignment = 8;
+} elsif ($arch eq "riscv") {
+    $function_regex = "^([0-9a-fA-F]+)\\s+<([^.0-9][0-9a-zA-Z_\\.]+)>:";
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\sR_RISCV_CALL\\s_mcount\$";
+    $type = ".quad";
+    $alignment = 2;
 } else {
     die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
 }
-- 
2.15.1

[PATCH v3 2/6] riscv/ftrace: Add dynamic function tracer support

[Alan Kao]

We now have dynamic ftrace with the following added items:

* ftrace_make_call, ftrace_make_nop (in kernel/ftrace.c)
  The two functions turns any recorded call site of filtered functions
  into a call to ftrace_caller or nops

* ftracce_update_ftrace_func (in kernel/ftrace.c)
  turns the stub call at ftrace_call into a call to a generic entry for
  function tracers.

* ftrace_caller (in kernel/mcount-dyn.S)
  The entry where each _mcount call sites calls to once they are
  filtered to be traced.

Also, this patch fixes the semantic problems in mcount.S, which will be
treated as only a reference implementation once we have the dynamic
ftrace.

Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
---
 arch/riscv/Kconfig              |   1 +
 arch/riscv/include/asm/ftrace.h |  45 ++++++++++++++++++
 arch/riscv/kernel/Makefile      |   5 +-
 arch/riscv/kernel/ftrace.c      | 100 +++++++++++++++++++++++++++++++++++++++-
 arch/riscv/kernel/mcount-dyn.S  |  50 ++++++++++++++++++++
 arch/riscv/kernel/mcount.S      |  22 +++++----
 6 files changed, 211 insertions(+), 12 deletions(-)
 create mode 100644 arch/riscv/kernel/mcount-dyn.S

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 1f45a76f412e..a5c5c88700d4 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -118,6 +118,7 @@ config ARCH_RV64I
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_DYNAMIC_FTRACE
 
 endchoice
 
diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
index 66d4175eb13e..acf0c7d001f3 100644
--- a/arch/riscv/include/asm/ftrace.h
+++ b/arch/riscv/include/asm/ftrace.h
@@ -8,3 +8,48 @@
 #if defined(CONFIG_FUNCTION_GRAPH_TRACER) && defined(CONFIG_FRAME_POINTER)
 #define HAVE_FUNCTION_GRAPH_FP_TEST
 #endif
+
+#ifndef __ASSEMBLY__
+void _mcount(void);
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/*
+ * A general call in RISC-V is a pair of insts:
+ * 1) auipc: setting high-20 pc-related bits to ra register
+ * 2) jalr: setting low-12 offset to ra, jump to ra, and set ra to
+ *          return address (original pc + 4)
+ *
+ * Dynamic ftrace generates probes to call sites, so we must deal with
+ * both auipc and jalr at the same time.
+ */
+
+#define MCOUNT_ADDR		((unsigned long)_mcount)
+#define JALR_SIGN_MASK		(0x00000800)
+#define JALR_OFFSET_MASK	(0x00000fff)
+#define AUIPC_OFFSET_MASK	(0xfffff000)
+#define AUIPC_PAD		(0x00001000)
+#define JALR_SHIFT		20
+#define JALR_BASIC		(0x000080e7)
+#define AUIPC_BASIC		(0x00000097)
+#define NOP4			(0x00000013)
+
+#define to_jalr_insn(_offset) \
+	(((_offset & JALR_OFFSET_MASK) << JALR_SHIFT) | JALR_BASIC)
+
+#define to_auipc_insn(_offset) ((_offset & JALR_SIGN_MASK) ? \
+	(((_offset & AUIPC_OFFSET_MASK) + AUIPC_PAD) | AUIPC_BASIC) : \
+	((_offset & AUIPC_OFFSET_MASK) | AUIPC_BASIC))
+
+/*
+ * Let auipc+jalr be the basic *mcount unit*, so we make it 8 bytes here.
+ */
+#define MCOUNT_INSN_SIZE 8
+#endif
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 196f62ffc428..d7bdf888f1ca 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -34,7 +34,8 @@ CFLAGS_setup.o := -mcmodel=medany
 obj-$(CONFIG_SMP)		+= smpboot.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_MODULES)		+= module.o
-obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
+
+obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= mcount-dyn.o
 
 clean:
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index d0de68d144cb..311c287433c9 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -6,9 +6,107 @@
  */
 
 #include <linux/ftrace.h>
+#include <linux/uaccess.h>
+#include <asm/cacheflush.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+static int ftrace_check_current_call(unsigned long hook_pos,
+				     unsigned int *expected)
+{
+	unsigned int replaced[2];
+	unsigned int nops[2] = {NOP4, NOP4};
+
+	/* we expect nops at the hook position */
+	if (!expected)
+		expected = nops;
+
+	/*
+	 * Read the text we want to modify;
+	 * return must be -EFAULT on read error
+	 */
+	if (probe_kernel_read(replaced, (void *)hook_pos, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	/*
+	 * Make sure it is what we expect it to be;
+	 * return must be -EINVAL on failed comparison
+	 */
+	if (memcmp(expected, replaced, sizeof(replaced))) {
+		pr_err("%p: expected (%08x %08x) but get (%08x %08x)",
+		       (void *)hook_pos, expected[0], expected[1], replaced[0],
+		       replaced[1]);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
+				bool enable)
+{
+	unsigned int offset = (unsigned int)(target - hook_pos);
+	unsigned int auipc_call = to_auipc_insn(offset);
+	unsigned int jalr_call = to_jalr_insn(offset);
+	unsigned int calls[2] = {auipc_call, jalr_call};
+	unsigned int nops[2] = {NOP4, NOP4};
+	int ret = 0;
+
+	/* when ftrace_make_nop is called */
+	if (!enable)
+		ret = ftrace_check_current_call(hook_pos, calls);
+
+	if (ret)
+		return ret;
+
+	/* replace the auipc-jalr pair at once */
+	ret = probe_kernel_write((void *)hook_pos, enable ? calls : nops,
+				 MCOUNT_INSN_SIZE);
+	/* return must be -EPERM on write error */
+	if (ret)
+		return -EPERM;
+
+	smp_mb();
+	flush_icache_range((void *)hook_pos, (void *)hook_pos + MCOUNT_INSN_SIZE);
+
+	return 0;
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	int ret = ftrace_check_current_call(rec->ip, NULL);
+
+	if (ret)
+		return ret;
+
+	return __ftrace_modify_call(rec->ip, addr, true);
+}
+
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+		    unsigned long addr)
+{
+	return __ftrace_modify_call(rec->ip, addr, false);
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	int ret = __ftrace_modify_call((unsigned long)&ftrace_call,
+				       (unsigned long)func, true);
+	if (!ret) {
+		ret = __ftrace_modify_call((unsigned long)&ftrace_regs_call,
+					   (unsigned long)func, true);
+	}
+
+	return ret;
+}
+
+int __init ftrace_dyn_arch_init(void)
+{
+	return 0;
+}
+#endif
 
 /*
- * Most of this file is copied from arm64.
+ * Most of this function is copied from arm64.
  */
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
new file mode 100644
index 000000000000..5731d9f56142
--- /dev/null
+++ b/arch/riscv/kernel/mcount-dyn.S
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2017 Andes Technology Corporation */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/asm.h>
+#include <asm/csr.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm-generic/export.h>
+#include <asm/ftrace.h>
+
+	.text
+
+	.macro SAVE_ABI_STATE
+	addi	sp, sp, -16
+	sd	s0, 0(sp)
+	sd	ra, 8(sp)
+	addi	s0, sp, 16
+	.endm
+
+	.macro RESTORE_ABI_STATE
+	ld	ra, 8(sp)
+	ld	s0, 0(sp)
+	addi	sp, sp, 16
+	.endm
+
+ENTRY(ftrace_caller)
+	/*
+	 * a0: the address in the caller when calling ftrace_caller
+	 * a1: the caller's return address
+	 */
+	ld	a1, -8(s0)
+	addi	a0, ra, -MCOUNT_INSN_SIZE
+	SAVE_ABI_STATE
+ftrace_call:
+	.global ftrace_call
+	/*
+	 * For the dynamic ftrace to work, here we should reserve at least
+	 * 8 bytes for a functional auipc-jalr pair.  The following call
+	 * means nothing but the required 8 bytes.
+	 *
+	 * Calling ftrace_update_ftrace_func would overwrite the call below.
+	 * Check ftrace_modify_all_code for details.
+	 */
+	call	ftrace_stub
+	RESTORE_ABI_STATE
+	ret
+ENDPROC(ftrace_caller)
diff --git a/arch/riscv/kernel/mcount.S b/arch/riscv/kernel/mcount.S
index c46a778627be..ce9bdc57a2a1 100644
--- a/arch/riscv/kernel/mcount.S
+++ b/arch/riscv/kernel/mcount.S
@@ -32,13 +32,13 @@
 	addi	s0, sp, 32
 	.endm
 
-	.macro STORE_ABI_STATE
+	.macro RESTORE_ABI_STATE
 	ld	ra, 8(sp)
 	ld	s0, 0(sp)
 	addi	sp, sp, 16
 	.endm
 
-	.macro STORE_RET_ABI_STATE
+	.macro RESTORE_RET_ABI_STATE
 	ld	ra, 24(sp)
 	ld	s0, 16(sp)
 	ld	a0, 8(sp)
@@ -46,6 +46,10 @@
 	.endm
 
 ENTRY(ftrace_stub)
+#ifdef CONFIG_DYNAMIC_FTRACE
+       .global _mcount
+       .set    _mcount, ftrace_stub
+#endif
 	ret
 ENDPROC(ftrace_stub)
 
@@ -66,15 +70,15 @@ ENTRY(return_to_handler)
 #ifdef HAVE_FUNCTION_GRAPH_FP_TEST
 	mv	a0, t6
 #endif
-	la	t0, ftrace_return_to_handler
-	jalr	t0
+	call	ftrace_return_to_handler
 	mv	a1, a0
-	STORE_RET_ABI_STATE
+	RESTORE_RET_ABI_STATE
 	jalr	a1
 ENDPROC(return_to_handler)
 EXPORT_SYMBOL(return_to_handler)
 #endif
 
+#ifndef CONFIG_DYNAMIC_FTRACE
 ENTRY(_mcount)
 	la	t4, ftrace_stub
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -104,9 +108,8 @@ do_ftrace_graph_caller:
 	ld	a2, -16(s0)
 #endif
 	SAVE_ABI_STATE
-	la	t0, prepare_ftrace_return
-	jalr	t0
-	STORE_ABI_STATE
+	call	prepare_ftrace_return
+	RESTORE_ABI_STATE
 	ret
 #endif
 
@@ -120,7 +123,8 @@ do_trace:
 
 	SAVE_ABI_STATE
 	jalr	t5
-	STORE_ABI_STATE
+	RESTORE_ABI_STATE
 	ret
 ENDPROC(_mcount)
 EXPORT_SYMBOL(_mcount)
+#endif
-- 
2.15.1

[PATCH v3 3/6] riscv/ftrace: Add dynamic function graph tracer support

[Alan Kao]

Once the function_graph tracer is enabled, a filtered function has the
following call sequence:

* ftracer_caller         ==> on/off by ftrace_make_call/ftrace_make_nop
* ftrace_graph_caller
* ftrace_graph_call      ==> on/off by ftrace_en/disable_ftrace_graph_caller
* prepare_ftrace_return

Considering the following DYNAMIC_FTRACE_WITH_REGS feature, it would be
more extendable to have a ftrace_graph_caller function, instead of
calling prepare_ftrace_return directly in ftrace_caller.

Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
---
 arch/riscv/kernel/ftrace.c     | 25 ++++++++++++++++-
 arch/riscv/kernel/mcount-dyn.S | 64 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index 311c287433c9..dce1286af9b0 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -51,7 +51,7 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
 	unsigned int nops[2] = {NOP4, NOP4};
 	int ret = 0;
 
-	/* when ftrace_make_nop is called */
+	/* for ftrace_make_nop and ftrace_disable_ftrace_graph_caller */
 	if (!enable)
 		ret = ftrace_check_current_call(hook_pos, calls);
 
@@ -105,6 +105,7 @@ int __init ftrace_dyn_arch_init(void)
 }
 #endif
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /*
  * Most of this function is copied from arm64.
  */
@@ -137,3 +138,25 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 		return;
 	*parent = return_hooker;
 }
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	int ret = ftrace_check_current_call((unsigned long)&ftrace_graph_call,
+					    NULL);
+
+	if (ret)
+		return ret;
+
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+				    (unsigned long)&prepare_ftrace_return, true);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+				    (unsigned long)&prepare_ftrace_return, false);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
index 5731d9f56142..1ddf8b1a9345 100644
--- a/arch/riscv/kernel/mcount-dyn.S
+++ b/arch/riscv/kernel/mcount-dyn.S
@@ -14,18 +14,62 @@
 	.text
 
 	.macro SAVE_ABI_STATE
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	addi    sp, sp, -48
+	sd      s0, 32(sp)
+	sd      ra, 40(sp)
+	addi    s0, sp, 48
+	sd      t0, 24(sp)
+	sd      t1, 16(sp)
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	sd      t2, 8(sp)
+#endif
+#else
 	addi	sp, sp, -16
 	sd	s0, 0(sp)
 	sd	ra, 8(sp)
 	addi	s0, sp, 16
+#endif
 	.endm
 
 	.macro RESTORE_ABI_STATE
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	ld	s0, 32(sp)
+	ld	ra, 40(sp)
+	addi	sp, sp, 48
+#else
 	ld	ra, 8(sp)
 	ld	s0, 0(sp)
 	addi	sp, sp, 16
+#endif
 	.endm
 
+	.macro RESTORE_GRAPH_ARGS
+	ld	a0, 24(sp)
+	ld	a1, 16(sp)
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	ld	a2, 8(sp)
+#endif
+	.endm
+
+ENTRY(ftrace_graph_caller)
+	addi	sp, sp, -16
+	sd	s0, 0(sp)
+	sd	ra, 8(sp)
+	addi	s0, sp, 16
+ftrace_graph_call:
+	.global ftrace_graph_call
+	/*
+	 * Calling ftrace_enable/disable_ftrace_graph_caller would overwrite the
+	 * call below.  Check ftrace_modify_all_code for details.
+	 */
+	call	ftrace_stub
+	ld	ra, 8(sp)
+	ld	s0, 0(sp)
+	addi	sp, sp, 16
+	ret
+ENDPROC(ftrace_graph_caller)
+
 ENTRY(ftrace_caller)
 	/*
 	 * a0: the address in the caller when calling ftrace_caller
@@ -33,6 +77,20 @@ ENTRY(ftrace_caller)
 	 */
 	ld	a1, -8(s0)
 	addi	a0, ra, -MCOUNT_INSN_SIZE
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/*
+	 * the graph tracer (specifically, prepare_ftrace_return) needs these
+	 * arguments but for now the function tracer occupies the regs, so we
+	 * save them in temporary regs to recover later.
+	 */
+	addi	t0, s0, -8
+	mv	t1, a0
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	ld	t2, -16(s0)
+#endif
+#endif
+
 	SAVE_ABI_STATE
 ftrace_call:
 	.global ftrace_call
@@ -45,6 +103,12 @@ ftrace_call:
 	 * Check ftrace_modify_all_code for details.
 	 */
 	call	ftrace_stub
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	RESTORE_GRAPH_ARGS
+	call	ftrace_graph_caller
+#endif
+
 	RESTORE_ABI_STATE
 	ret
 ENDPROC(ftrace_caller)
-- 
2.15.1

[PATCH v3 4/6] riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support

[Alan Kao]

Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
---
 arch/riscv/include/asm/ftrace.h | 1 +
 arch/riscv/kernel/mcount-dyn.S  | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
index acf0c7d001f3..429a6a156645 100644
--- a/arch/riscv/include/asm/ftrace.h
+++ b/arch/riscv/include/asm/ftrace.h
@@ -9,6 +9,7 @@
 #define HAVE_FUNCTION_GRAPH_FP_TEST
 #endif
 
+#define ARCH_SUPPORTS_FTRACE_OPS 1
 #ifndef __ASSEMBLY__
 void _mcount(void);
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
index 1ddf8b1a9345..c8959bdd4f38 100644
--- a/arch/riscv/kernel/mcount-dyn.S
+++ b/arch/riscv/kernel/mcount-dyn.S
@@ -74,9 +74,12 @@ ENTRY(ftrace_caller)
 	/*
 	 * a0: the address in the caller when calling ftrace_caller
 	 * a1: the caller's return address
+	 * a2: the address of global variable function_trace_op
 	 */
 	ld	a1, -8(s0)
 	addi	a0, ra, -MCOUNT_INSN_SIZE
+	la	t5, function_trace_op
+	ld	a2, 0(t5)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	/*
-- 
2.15.1

[PATCH v3 5/6] riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support

[Alan Kao]

Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
---
 arch/riscv/Kconfig             |   1 +
 arch/riscv/kernel/ftrace.c     |  17 ++++++
 arch/riscv/kernel/mcount-dyn.S | 124 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 142 insertions(+)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a5c5c88700d4..bb2c64976583 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -119,6 +119,7 @@ config ARCH_RV64I
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 
 endchoice
 
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index dce1286af9b0..3922b29c107b 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -105,6 +105,23 @@ int __init ftrace_dyn_arch_init(void)
 }
 #endif
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+		       unsigned long addr)
+{
+	unsigned int offset = (unsigned int)(old_addr - rec->ip);
+	unsigned int auipc_call = to_auipc_insn(offset);
+	unsigned int jalr_call = to_jalr_insn(offset);
+	unsigned int calls[2] = {auipc_call, jalr_call};
+	int ret = ftrace_check_current_call(rec->ip, calls);
+
+	if (ret)
+		return ret;
+
+	return __ftrace_modify_call(rec->ip, addr, true);
+}
+#endif
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /*
  * Most of this function is copied from arm64.
diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
index c8959bdd4f38..e123ab7a8f32 100644
--- a/arch/riscv/kernel/mcount-dyn.S
+++ b/arch/riscv/kernel/mcount-dyn.S
@@ -115,3 +115,127 @@ ftrace_call:
 	RESTORE_ABI_STATE
 	ret
 ENDPROC(ftrace_caller)
+
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+	.macro SAVE_ALL
+	addi	sp, sp, -(PT_SIZE_ON_STACK+16)
+	sd	s0, (PT_SIZE_ON_STACK)(sp)
+	sd	ra, (PT_SIZE_ON_STACK+8)(sp)
+	addi	s0, sp, (PT_SIZE_ON_STACK+16)
+
+	sd x1,  PT_RA(sp)
+	sd x2,  PT_SP(sp)
+	sd x3,  PT_GP(sp)
+	sd x4,  PT_TP(sp)
+	sd x5,  PT_T0(sp)
+	sd x6,  PT_T1(sp)
+	sd x7,  PT_T2(sp)
+	sd x8,  PT_S0(sp)
+	sd x9,  PT_S1(sp)
+	sd x10, PT_A0(sp)
+	sd x11, PT_A1(sp)
+	sd x12, PT_A2(sp)
+	sd x13, PT_A3(sp)
+	sd x14, PT_A4(sp)
+	sd x15, PT_A5(sp)
+	sd x16, PT_A6(sp)
+	sd x17, PT_A7(sp)
+	sd x18, PT_S2(sp)
+	sd x19, PT_S3(sp)
+	sd x20, PT_S4(sp)
+	sd x21, PT_S5(sp)
+	sd x22, PT_S6(sp)
+	sd x23, PT_S7(sp)
+	sd x24, PT_S8(sp)
+	sd x25, PT_S9(sp)
+	sd x26, PT_S10(sp)
+	sd x27, PT_S11(sp)
+	sd x28, PT_T3(sp)
+	sd x29, PT_T4(sp)
+	sd x30, PT_T5(sp)
+	sd x31, PT_T6(sp)
+	.endm
+
+	.macro RESTORE_ALL
+	ld x1,  PT_RA(sp)
+	ld x2,  PT_SP(sp)
+	ld x3,  PT_GP(sp)
+	ld x4,  PT_TP(sp)
+	ld x5,  PT_T0(sp)
+	ld x6,  PT_T1(sp)
+	ld x7,  PT_T2(sp)
+	ld x8,  PT_S0(sp)
+	ld x9,  PT_S1(sp)
+	ld x10, PT_A0(sp)
+	ld x11, PT_A1(sp)
+	ld x12, PT_A2(sp)
+	ld x13, PT_A3(sp)
+	ld x14, PT_A4(sp)
+	ld x15, PT_A5(sp)
+	ld x16, PT_A6(sp)
+	ld x17, PT_A7(sp)
+	ld x18, PT_S2(sp)
+	ld x19, PT_S3(sp)
+	ld x20, PT_S4(sp)
+	ld x21, PT_S5(sp)
+	ld x22, PT_S6(sp)
+	ld x23, PT_S7(sp)
+	ld x24, PT_S8(sp)
+	ld x25, PT_S9(sp)
+	ld x26, PT_S10(sp)
+	ld x27, PT_S11(sp)
+	ld x28, PT_T3(sp)
+	ld x29, PT_T4(sp)
+	ld x30, PT_T5(sp)
+	ld x31, PT_T6(sp)
+
+	ld	s0, (PT_SIZE_ON_STACK)(sp)
+	ld	ra, (PT_SIZE_ON_STACK+8)(sp)
+	addi	sp, sp, (PT_SIZE_ON_STACK+16)
+	.endm
+
+	.macro RESTORE_GRAPH_REG_ARGS
+	ld	a0, PT_T0(sp)
+	ld	a1, PT_T1(sp)
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	ld	a2, PT_T2(sp)
+#endif
+	.endm
+
+/*
+ * Most of the contents are the same as ftrace_caller.
+ */
+ENTRY(ftrace_regs_caller)
+	/*
+	 * a3: the address of all registers in the stack
+	 */
+	ld	a1, -8(s0)
+	addi	a0, ra, -MCOUNT_INSN_SIZE
+	la	t5, function_trace_op
+	ld	a2, 0(t5)
+	addi	a3, sp, -(PT_SIZE_ON_STACK+16)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	addi	t0, s0, -8
+	mv	t1, a0
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	ld	t2, -16(s0)
+#endif
+#endif
+	SAVE_ALL
+
+ftrace_regs_call:
+	.global ftrace_regs_call
+	addi	x0, x0, 0
+	addi	x0, x0, 0
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	RESTORE_GRAPH_REG_ARGS
+	call	ftrace_graph_caller
+#endif
+
+	RESTORE_ALL
+	ret
+ENDPROC(ftrace_regs_caller)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
-- 
2.15.1

[PATCH v3 6/6] riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support

[Alan Kao]

In walk_stackframe, the pc now receives the address from calling
ftrace_graph_ret_addr instead of manual calculation.

Note that the original calculation,
	pc = frame->ra - 4
is buggy when the instruction at the return address happened to be a
compressed inst. But since it is not a critical part of ftrace, it is
ignored for now to ease the review process.

Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
---
 arch/riscv/include/asm/ftrace.h | 1 +
 arch/riscv/kernel/ftrace.c      | 2 +-
 arch/riscv/kernel/stacktrace.c  | 6 ++++++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
index 429a6a156645..6e4b4c96b63e 100644
--- a/arch/riscv/include/asm/ftrace.h
+++ b/arch/riscv/include/asm/ftrace.h
@@ -8,6 +8,7 @@
 #if defined(CONFIG_FUNCTION_GRAPH_TRACER) && defined(CONFIG_FRAME_POINTER)
 #define HAVE_FUNCTION_GRAPH_FP_TEST
 #endif
+#define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
 
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #ifndef __ASSEMBLY__
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index 3922b29c107b..ded8ab25f4ad 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -150,7 +150,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 		return;
 
 	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
+				       frame_pointer, parent);
 	if (err == -EBUSY)
 		return;
 	*parent = return_hooker;
diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index 559aae781154..a4b1d94371a0 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -18,6 +18,7 @@
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
 #include <linux/stacktrace.h>
+#include <linux/ftrace.h>
 
 #ifdef CONFIG_FRAME_POINTER
 
@@ -63,7 +64,12 @@ static void notrace walk_stackframe(struct task_struct *task,
 		frame = (struct stackframe *)fp - 1;
 		sp = fp;
 		fp = frame->fp;
+#ifdef HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
+		pc = ftrace_graph_ret_addr(current, NULL, frame->ra,
+					   (unsigned long *)(fp - 8));
+#else
 		pc = frame->ra - 0x4;
+#endif
 	}
 }
 
-- 
2.15.1

Re: [patches] [PATCH v3 0/6] Add dynamic ftrace support for RISC-V platforms

[Palmer Dabbelt]

On Thu, 18 Jan 2018 07:45:39 PST (-0800), nonerkao@gmail.com wrote:
> This patch set includes the building blocks of dynamic ftrace features
> for RISC-V machines.
>
> Changes in v3:
>  - Replace the nops at the tracer call sites into a "call ftrace_stub"
>    instruction for better understanding (1/6 and 2/6)
>
> Changes in v2:
>  - Fix the return value as writing to kernel text goes wrong (2/6)
>  - Replace manual comparisons by calling memcmp (2/6)
>  - Simplify the conditional assignment in the Makefile (1/6)
>
> Alan Kao (6):
>   riscv/ftrace: Add RECORD_MCOUNT support
>   riscv/ftrace: Add dynamic function tracer support
>   riscv/ftrace: Add dynamic function graph tracer support
>   riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
>   riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
>   riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
>
>  arch/riscv/Kconfig              |   3 +
>  arch/riscv/Makefile             |   3 +
>  arch/riscv/include/asm/ftrace.h |  47 ++++++++
>  arch/riscv/kernel/Makefile      |   5 +-
>  arch/riscv/kernel/ftrace.c      | 142 ++++++++++++++++++++++-
>  arch/riscv/kernel/mcount-dyn.S  | 241 ++++++++++++++++++++++++++++++++++++++++
>  arch/riscv/kernel/mcount.S      |  22 ++--
>  arch/riscv/kernel/stacktrace.c  |   6 +
>  scripts/recordmcount.pl         |   5 +
>  9 files changed, 461 insertions(+), 13 deletions(-)
>  create mode 100644 arch/riscv/kernel/mcount-dyn.S

Sorry it took me a while to get around to these.  Do you mind submitting a v4 
that's based on linux-4.15?  I'm getting all sorts of merge errors trying to 
"git am" these.

Re: [patches] [PATCH v3 0/6] Add dynamic ftrace support for RISC-V platforms

[Alan Kao]

On Wed, Feb 07, 2018 at 04:37:10PM -0800, Palmer Dabbelt wrote:
> On Thu, 18 Jan 2018 07:45:39 PST (-0800), nonerkao@gmail.com wrote:
> > This patch set includes the building blocks of dynamic ftrace features
> > for RISC-V machines.
> > 
> > Changes in v3:
> >  - Replace the nops at the tracer call sites into a "call ftrace_stub"
> >    instruction for better understanding (1/6 and 2/6)
> > 
> > Changes in v2:
> >  - Fix the return value as writing to kernel text goes wrong (2/6)
> >  - Replace manual comparisons by calling memcmp (2/6)
> >  - Simplify the conditional assignment in the Makefile (1/6)
> > 
> > Alan Kao (6):
> >   riscv/ftrace: Add RECORD_MCOUNT support
> >   riscv/ftrace: Add dynamic function tracer support
> >   riscv/ftrace: Add dynamic function graph tracer support
> >   riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
> >   riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
> >   riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
> > 
> >  arch/riscv/Kconfig              |   3 +
> >  arch/riscv/Makefile             |   3 +
> >  arch/riscv/include/asm/ftrace.h |  47 ++++++++
> >  arch/riscv/kernel/Makefile      |   5 +-
> >  arch/riscv/kernel/ftrace.c      | 142 ++++++++++++++++++++++-
> >  arch/riscv/kernel/mcount-dyn.S  | 241 ++++++++++++++++++++++++++++++++++++++++
> >  arch/riscv/kernel/mcount.S      |  22 ++--
> >  arch/riscv/kernel/stacktrace.c  |   6 +
> >  scripts/recordmcount.pl         |   5 +
> >  9 files changed, 461 insertions(+), 13 deletions(-)
> >  create mode 100644 arch/riscv/kernel/mcount-dyn.S
> 
> Sorry it took me a while to get around to these.  Do you mind submitting a
> v4 that's based on linux-4.15?  I'm getting all sorts of merge errors trying
> to "git am" these.

Sure.  But do you mean the riscv-linux-4.15 at the github repo or
Linus's linux-4.15-rc......,says, rc8?

Also, we have fixed our internal email server issue, so I will send this
v4 set using alankao@andestech.com, by which I signed off all previous
ftrace patches, instead of the current gmail one.  I hope this won't be
confusing to you.

Thanks,
Alan

Re: [patches] [PATCH v3 0/6] Add dynamic ftrace support for RISC-V platforms

[Alan Kao]

On Wed, Feb 07, 2018 at 04:37:10PM -0800, Palmer Dabbelt wrote:
> On Thu, 18 Jan 2018 07:45:39 PST (-0800), nonerkao@gmail.com wrote:
> > This patch set includes the building blocks of dynamic ftrace features
> > for RISC-V machines.
> > 
> > Changes in v3:
> >  - Replace the nops at the tracer call sites into a "call ftrace_stub"
> >    instruction for better understanding (1/6 and 2/6)
> > 
> > Changes in v2:
> >  - Fix the return value as writing to kernel text goes wrong (2/6)
> >  - Replace manual comparisons by calling memcmp (2/6)
> >  - Simplify the conditional assignment in the Makefile (1/6)
> > 
> > Alan Kao (6):
> >   riscv/ftrace: Add RECORD_MCOUNT support
> >   riscv/ftrace: Add dynamic function tracer support
> >   riscv/ftrace: Add dynamic function graph tracer support
> >   riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
> >   riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
> >   riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
> > 
> >  arch/riscv/Kconfig              |   3 +
> >  arch/riscv/Makefile             |   3 +
> >  arch/riscv/include/asm/ftrace.h |  47 ++++++++
> >  arch/riscv/kernel/Makefile      |   5 +-
> >  arch/riscv/kernel/ftrace.c      | 142 ++++++++++++++++++++++-
> >  arch/riscv/kernel/mcount-dyn.S  | 241 ++++++++++++++++++++++++++++++++++++++++
> >  arch/riscv/kernel/mcount.S      |  22 ++--
> >  arch/riscv/kernel/stacktrace.c  |   6 +
> >  scripts/recordmcount.pl         |   5 +
> >  9 files changed, 461 insertions(+), 13 deletions(-)
> >  create mode 100644 arch/riscv/kernel/mcount-dyn.S
> 
> Sorry it took me a while to get around to these.  Do you mind submitting a
> v4 that's based on linux-4.15?  I'm getting all sorts of merge errors trying
> to "git am" these.

Sorry for the misunderstanding in the previous email.  I will rebase the
set on linux-4.15.  Thanks.