From: Rask Ingemann Lambertsen <rask@formelder.dk>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
Marc Zyngier <marc.zyngier@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s
Date: Sun, 21 Jan 2018 12:03:19 +0100 [thread overview]
Message-ID: <20180121110319.GD3421@localhost> (raw)
In-Reply-To: <20180119231735.61504-9-icenowy@aosc.io>
On Sat, Jan 20, 2018 at 07:17:34AM +0800, Icenowy Zheng wrote:
> As we have the support for suniv pin controller and CCU now, add a
> initial DTSI for it.
>
> F1C100s is one product with the suniv die, which has a 32MiB co-packaged
> DDR1 DRAM chip. As there's nothing special for it, add a dummy DTSI file
> for it.
[...]
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d0381e9caf21..b877e0bf1823 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -972,6 +972,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-optimus.dtb \
> sun9i-a80-cubieboard4.dtb
> +dtb-$(CONFIG_MACH_SUNIV) += \
> + suniv-f1c100s-licheepi-nano.dtb
> dtb-$(CONFIG_ARCH_TANGO) += \
> tango4-vantage-1172.dtb
> dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
The hunk above should go with your patch
"[RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
instead.
--
Rask Ingemann Lambertsen
WARNING: multiple messages have this Message-ID (diff)
From: Rask Ingemann Lambertsen <rask@formelder.dk>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
Russell King <linux@armlinux.org.uk>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s
Date: Sun, 21 Jan 2018 12:03:19 +0100 [thread overview]
Message-ID: <20180121110319.GD3421@localhost> (raw)
In-Reply-To: <20180119231735.61504-9-icenowy@aosc.io>
On Sat, Jan 20, 2018 at 07:17:34AM +0800, Icenowy Zheng wrote:
> As we have the support for suniv pin controller and CCU now, add a
> initial DTSI for it.
>
> F1C100s is one product with the suniv die, which has a 32MiB co-packaged
> DDR1 DRAM chip. As there's nothing special for it, add a dummy DTSI file
> for it.
[...]
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d0381e9caf21..b877e0bf1823 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -972,6 +972,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-optimus.dtb \
> sun9i-a80-cubieboard4.dtb
> +dtb-$(CONFIG_MACH_SUNIV) += \
> + suniv-f1c100s-licheepi-nano.dtb
> dtb-$(CONFIG_ARCH_TANGO) += \
> tango4-vantage-1172.dtb
> dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
The hunk above should go with your patch
"[RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
instead.
--
Rask Ingemann Lambertsen
WARNING: multiple messages have this Message-ID (diff)
From: Rask Ingemann Lambertsen <rask@formelder.dk>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
Marc Zyngier <marc.zyngier@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s
Date: Sun, 21 Jan 2018 12:03:19 +0100 [thread overview]
Message-ID: <20180121110319.GD3421@localhost> (raw)
In-Reply-To: <20180119231735.61504-9-icenowy@aosc.io>
On Sat, Jan 20, 2018 at 07:17:34AM +0800, Icenowy Zheng wrote:
> As we have the support for suniv pin controller and CCU now, add a
> initial DTSI for it.
>
> F1C100s is one product with the suniv die, which has a 32MiB co-packaged
> DDR1 DRAM chip. As there's nothing special for it, add a dummy DTSI file
> for it.
[...]
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d0381e9caf21..b877e0bf1823 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -972,6 +972,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-optimus.dtb \
> sun9i-a80-cubieboard4.dtb
> +dtb-$(CONFIG_MACH_SUNIV) += \
> + suniv-f1c100s-licheepi-nano.dtb
> dtb-$(CONFIG_ARCH_TANGO) += \
> tango4-vantage-1172.dtb
> dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
The hunk above should go with your patch
"[RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
instead.
--
Rask Ingemann Lambertsen
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: rask@formelder.dk (Rask Ingemann Lambertsen)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s
Date: Sun, 21 Jan 2018 12:03:19 +0100 [thread overview]
Message-ID: <20180121110319.GD3421@localhost> (raw)
In-Reply-To: <20180119231735.61504-9-icenowy@aosc.io>
On Sat, Jan 20, 2018 at 07:17:34AM +0800, Icenowy Zheng wrote:
> As we have the support for suniv pin controller and CCU now, add a
> initial DTSI for it.
>
> F1C100s is one product with the suniv die, which has a 32MiB co-packaged
> DDR1 DRAM chip. As there's nothing special for it, add a dummy DTSI file
> for it.
[...]
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index d0381e9caf21..b877e0bf1823 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -972,6 +972,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
> dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-optimus.dtb \
> sun9i-a80-cubieboard4.dtb
> +dtb-$(CONFIG_MACH_SUNIV) += \
> + suniv-f1c100s-licheepi-nano.dtb
> dtb-$(CONFIG_ARCH_TANGO) += \
> tango4-vantage-1172.dtb
> dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
The hunk above should go with your patch
"[RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano"
instead.
--
Rask Ingemann Lambertsen
next prev parent reply other threads:[~2018-01-21 11:03 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-19 23:17 [RFC PATCH 0/9] initial support for "suniv" Allwinner new ARM9 SoC Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
[not found] ` <20180119231735.61504-1-icenowy-h8G6r0blFSE@public.gmane.org>
2018-01-19 23:17 ` [RFC PATCH 1/9] ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner SoCs Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-20 3:04 ` [linux-sunxi] " Julian Calaby
2018-01-20 3:04 ` Julian Calaby
2018-01-19 23:17 ` [RFC PATCH 2/9] ARM: sunxi: add Allwinner ARMv5 SoCs Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
[not found] ` <20180119231735.61504-3-icenowy-h8G6r0blFSE@public.gmane.org>
2018-01-20 3:06 ` Julian Calaby
2018-01-20 3:06 ` [linux-sunxi] " Julian Calaby
2018-01-20 3:06 ` Julian Calaby
2018-01-20 3:10 ` Icenowy Zheng
2018-01-20 3:10 ` Icenowy Zheng
2018-01-20 3:10 ` Icenowy Zheng
[not found] ` <76DC4CD7-4A07-40C7-80A8-1C2D177E8109-h8G6r0blFSE@public.gmane.org>
2018-01-20 3:22 ` Julian Calaby
2018-01-20 3:22 ` [linux-sunxi] " Julian Calaby
2018-01-20 3:22 ` Julian Calaby
2018-01-20 3:22 ` Julian Calaby
2018-01-22 12:15 ` Maxime Ripard
2018-01-22 12:15 ` Maxime Ripard
2018-01-19 23:17 ` [RFC PATCH 3/9] irqchip/sun4i: add support for suniv interrupt controller Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 4/9] clocksource: sun4i: add a compatible for suniv Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 5/9] clocksource/drivers/sun4i: register as sched_clock on suniv Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 6/9] pinctrl: sunxi: add support for suniv (newer F-series SoCs) Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 7/9] clk: sunxi-ng: add support for suniv SoC Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` [RFC PATCH 8/9] ARM: dts: suniv: add initial DTSI file for suniv and F1C100s Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-21 11:03 ` Rask Ingemann Lambertsen [this message]
2018-01-21 11:03 ` Rask Ingemann Lambertsen
2018-01-21 11:03 ` Rask Ingemann Lambertsen
2018-01-21 11:03 ` Rask Ingemann Lambertsen
2018-01-19 23:17 ` [RFC PATCH 9/9] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-19 23:17 ` Icenowy Zheng
2018-01-22 12:14 ` [RFC PATCH 0/9] initial support for "suniv" Allwinner new ARM9 SoC Maxime Ripard
2018-01-22 12:14 ` Maxime Ripard
2018-01-22 12:14 ` Maxime Ripard
[not found] ` <20180122121435.bpayxk4uzfqbhqse-ZC1Zs529Oq4@public.gmane.org>
2018-01-24 13:10 ` Icenowy Zheng
2018-01-24 13:10 ` Icenowy Zheng
2018-01-24 13:10 ` Icenowy Zheng
2018-01-25 15:35 ` Maxime Ripard
2018-01-25 15:35 ` Maxime Ripard
2018-01-25 15:35 ` Maxime Ripard
2018-01-25 15:38 ` Icenowy Zheng
2018-01-25 15:38 ` Icenowy Zheng
2018-01-26 14:43 ` Maxime Ripard
2018-01-26 14:43 ` Maxime Ripard
2018-01-26 20:57 ` Icenowy Zheng
2018-01-26 20:57 ` Icenowy Zheng
2018-01-29 19:48 ` Rob Herring
2018-01-29 19:48 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180121110319.GD3421@localhost \
--to=rask@formelder.dk \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.