* [PATCH v2] arm: dts: ls1021a: Add configure-gfladj property to USB3 node
@ 2018-01-26 8:22 ` yinbo.zhu
0 siblings, 0 replies; 3+ messages in thread
From: yinbo.zhu @ 2018-01-26 8:22 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Russell King
Cc: xiaobo.xie, jerry.huang, ran.wang_1,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list, yinbo . zhu
From: yinbo.zhu <yinbo.zhu@nxp.com>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required
or not
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: yinbo zhu <yinbo.zhu@nxp.com>
---
Change in v2:
Remove the automatic generated tag from Gerrit.
Change "yinbo.zhu" to "yinbo zhu".
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 9319e1f..ae8fc40 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -681,6 +681,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
+ configure-gfladj;
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
};
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2] arm: dts: ls1021a: Add configure-gfladj property to USB3 node
@ 2018-01-26 8:22 ` yinbo.zhu
0 siblings, 0 replies; 3+ messages in thread
From: yinbo.zhu @ 2018-01-26 8:22 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Russell King
Cc: xiaobo.xie, jerry.huang, ran.wang_1,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list, yinbo . zhu
From: yinbo.zhu <yinbo.zhu@nxp.com>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required
or not
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: yinbo zhu <yinbo.zhu@nxp.com>
---
Change in v2:
Remove the automatic generated tag from Gerrit.
Change "yinbo.zhu" to "yinbo zhu".
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 9319e1f..ae8fc40 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -681,6 +681,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
+ configure-gfladj;
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
};
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v2] arm: dts: ls1021a: Add configure-gfladj property to USB3 node
@ 2018-01-26 8:22 ` yinbo.zhu
0 siblings, 0 replies; 3+ messages in thread
From: yinbo.zhu at nxp.com @ 2018-01-26 8:22 UTC (permalink / raw)
To: linux-arm-kernel
From: yinbo.zhu <yinbo.zhu@nxp.com>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required
or not
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: yinbo zhu <yinbo.zhu@nxp.com>
---
Change in v2:
Remove the automatic generated tag from Gerrit.
Change "yinbo.zhu" to "yinbo zhu".
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 9319e1f..ae8fc40 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -681,6 +681,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
+ configure-gfladj;
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
};
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-01-26 9:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-26 8:22 [PATCH v2] arm: dts: ls1021a: Add configure-gfladj property to USB3 node yinbo.zhu
2018-01-26 8:22 ` yinbo.zhu at nxp.com
2018-01-26 8:22 ` yinbo.zhu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.