All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philipp Rossak <embed3d@gmail.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	maxime.ripard@free-electrons.com, wens@csie.org,
	linux@armlinux.org.uk, jic23@kernel.org, knaack.h@gmx.de,
	lars@metafoo.de, pmeerw@pmeerw.net, davem@davemloft.net,
	hans.verkuil@cisco.com, mchehab@kernel.org, rask@formelder.dk,
	clabbe.montjoie@gmail.com, sean@mess.org, krzk@kernel.org,
	quentin.schulz@free-electrons.com, icenowy@aosc.io,
	edu.molinas@gmail.com, singhalsimran0@gmail.com
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
Date: Mon, 29 Jan 2018 00:29:06 +0100	[thread overview]
Message-ID: <20180128232919.12639-4-embed3d@gmail.com> (raw)
In-Reply-To: <20180128232919.12639-1-embed3d@gmail.com>

From: Icenowy Zheng <icenowy@aosc.io>

As the H3 SoC, which is also in sun8i line, has totally different
register map for the thermal sensor (a cut down version of GPADC), we
should rename A23/A33-specified registers to contain A33, in order to
prevent obfuscation with H3 registers. Currently these registers are
only prefixed "SUN8I", not "SUN8I_A33".

Add "_A33" after "SUN8I" on the register names.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
 drivers/iio/adc/sun4i-gpadc-iio.c | 2 +-
 include/linux/mfd/sun4i-gpadc.h   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 04d7147e0110..03804ff9c006 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -88,7 +88,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
 static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.temp_offset = -1662,
 	.temp_scale = 162,
-	.tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
+	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
 };
 
 struct sun4i_gpadc_iio {
diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
index 139872c2e0fe..78d31984a222 100644
--- a/include/linux/mfd/sun4i-gpadc.h
+++ b/include/linux/mfd/sun4i-gpadc.h
@@ -38,9 +38,9 @@
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(x)		(GENMASK(3, 0) & BIT(x))
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_MASK			GENMASK(3, 0)
 
-/* TP_CTRL1 bits for sun8i SoCs */
-#define SUN8I_GPADC_CTRL1_CHOP_TEMP_EN			BIT(8)
-#define SUN8I_GPADC_CTRL1_GPADC_CALI_EN			BIT(7)
+/* TP_CTRL1 bits for A33 */
+#define SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN		BIT(8)
+#define SUN8I_A33_GPADC_CTRL1_GPADC_CALI_EN		BIT(7)
 
 #define SUN4I_GPADC_CTRL2				0x08
 
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rossak <embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	wens-jdAy2FN1RRM@public.gmane.org,
	linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
	jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	knaack.h-Mmb7MZpHnFY@public.gmane.org,
	lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
	pmeerw-jW+XmwGofnusTnJN9+BGXg@public.gmane.org,
	davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
	hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org,
	mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	rask-SivP7zSAdNDZaaYASwVUlg@public.gmane.org,
	clabbe.montjoie-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	sean-hENCXIMQXOg@public.gmane.org,
	krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	icenowy-h8G6r0blFSE@public.gmane.org,
	edu.molinas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	singhalsimran0-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
Date: Mon, 29 Jan 2018 00:29:06 +0100	[thread overview]
Message-ID: <20180128232919.12639-4-embed3d@gmail.com> (raw)
In-Reply-To: <20180128232919.12639-1-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>

As the H3 SoC, which is also in sun8i line, has totally different
register map for the thermal sensor (a cut down version of GPADC), we
should rename A23/A33-specified registers to contain A33, in order to
prevent obfuscation with H3 registers. Currently these registers are
only prefixed "SUN8I", not "SUN8I_A33".

Add "_A33" after "SUN8I" on the register names.

Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Reviewed-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Jonathan Cameron <jonathan.cameron-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 drivers/iio/adc/sun4i-gpadc-iio.c | 2 +-
 include/linux/mfd/sun4i-gpadc.h   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 04d7147e0110..03804ff9c006 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -88,7 +88,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
 static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.temp_offset = -1662,
 	.temp_scale = 162,
-	.tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
+	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
 };
 
 struct sun4i_gpadc_iio {
diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
index 139872c2e0fe..78d31984a222 100644
--- a/include/linux/mfd/sun4i-gpadc.h
+++ b/include/linux/mfd/sun4i-gpadc.h
@@ -38,9 +38,9 @@
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(x)		(GENMASK(3, 0) & BIT(x))
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_MASK			GENMASK(3, 0)
 
-/* TP_CTRL1 bits for sun8i SoCs */
-#define SUN8I_GPADC_CTRL1_CHOP_TEMP_EN			BIT(8)
-#define SUN8I_GPADC_CTRL1_GPADC_CALI_EN			BIT(7)
+/* TP_CTRL1 bits for A33 */
+#define SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN		BIT(8)
+#define SUN8I_A33_GPADC_CTRL1_GPADC_CALI_EN		BIT(7)
 
 #define SUN4I_GPADC_CTRL2				0x08
 
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: embed3d@gmail.com (Philipp Rossak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
Date: Mon, 29 Jan 2018 00:29:06 +0100	[thread overview]
Message-ID: <20180128232919.12639-4-embed3d@gmail.com> (raw)
In-Reply-To: <20180128232919.12639-1-embed3d@gmail.com>

From: Icenowy Zheng <icenowy@aosc.io>

As the H3 SoC, which is also in sun8i line, has totally different
register map for the thermal sensor (a cut down version of GPADC), we
should rename A23/A33-specified registers to contain A33, in order to
prevent obfuscation with H3 registers. Currently these registers are
only prefixed "SUN8I", not "SUN8I_A33".

Add "_A33" after "SUN8I" on the register names.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
---
 drivers/iio/adc/sun4i-gpadc-iio.c | 2 +-
 include/linux/mfd/sun4i-gpadc.h   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index 04d7147e0110..03804ff9c006 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -88,7 +88,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
 static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.temp_offset = -1662,
 	.temp_scale = 162,
-	.tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
+	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
 };
 
 struct sun4i_gpadc_iio {
diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
index 139872c2e0fe..78d31984a222 100644
--- a/include/linux/mfd/sun4i-gpadc.h
+++ b/include/linux/mfd/sun4i-gpadc.h
@@ -38,9 +38,9 @@
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(x)		(GENMASK(3, 0) & BIT(x))
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_MASK			GENMASK(3, 0)
 
-/* TP_CTRL1 bits for sun8i SoCs */
-#define SUN8I_GPADC_CTRL1_CHOP_TEMP_EN			BIT(8)
-#define SUN8I_GPADC_CTRL1_GPADC_CALI_EN			BIT(7)
+/* TP_CTRL1 bits for A33 */
+#define SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN		BIT(8)
+#define SUN8I_A33_GPADC_CTRL1_GPADC_CALI_EN		BIT(7)
 
 #define SUN4I_GPADC_CTRL2				0x08
 
-- 
2.11.0

  parent reply	other threads:[~2018-01-28 23:33 UTC|newest]

Thread overview: 164+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-28 23:29 [PATCH v2 00/16] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 01/16] dt-bindings: update the Allwinner GPADC device tree binding for H3 & A83T Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:19   ` Maxime Ripard
2018-01-29  9:19     ` Maxime Ripard
2018-01-29  9:19     ` Maxime Ripard
2018-01-29 12:30     ` Philipp Rossak
2018-01-29 12:30       ` Philipp Rossak
2018-01-29 12:30       ` Philipp Rossak
2018-01-31 17:40   ` Quentin Schulz
2018-01-31 17:40     ` Quentin Schulz
2018-01-31 17:40     ` Quentin Schulz
2018-01-31 18:14     ` Philipp Rossak
2018-01-31 18:14       ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 02/16] arm: config: sunxi_defconfig: enable SUN4I_GPADC Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:21   ` Maxime Ripard
2018-01-29  9:21     ` Maxime Ripard
2018-01-29  9:21     ` Maxime Ripard
2018-01-28 23:29 ` Philipp Rossak [this message]
2018-01-28 23:29   ` [PATCH v2 03/16] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33 Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 04/16] iio: adc: sun4i-gpadc-iio: rework: sampling start/end code readout reg Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:27   ` Maxime Ripard
2018-01-29  9:27     ` Maxime Ripard
2018-01-29  9:27     ` Maxime Ripard
2018-01-31 17:51   ` Quentin Schulz
2018-01-31 17:51     ` Quentin Schulz
2018-01-31 17:51     ` Quentin Schulz
2018-01-31 18:35     ` Philipp Rossak
2018-01-31 18:35       ` Philipp Rossak
2018-01-31 18:35       ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 05/16] iio: adc: sun4i-gpadc-iio: rework: support clocks and reset Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:31   ` Maxime Ripard
2018-01-29  9:31     ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 06/16] iio: adc: sun4i-gpadc-iio: rework: support multiple sensors Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:37   ` Maxime Ripard
2018-01-29  9:37     ` Maxime Ripard
2018-01-29  9:37     ` Maxime Ripard
2018-01-31 18:42   ` Quentin Schulz
2018-01-31 18:42     ` Quentin Schulz
2018-02-02 14:13     ` Philipp Rossak
2018-02-02 14:13       ` Philipp Rossak
2018-02-02 14:13       ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 07/16] iio: adc: sun4i-gpadc-iio: rework: support nvmem calibration data Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:40   ` Maxime Ripard
2018-01-29  9:40     ` Maxime Ripard
2018-01-29  9:40     ` Maxime Ripard
2018-01-29 12:33     ` Philipp Rossak
2018-01-29 12:33       ` Philipp Rossak
2018-01-29 12:33       ` Philipp Rossak
2018-01-30  8:36       ` Maxime Ripard
2018-01-30  8:36         ` Maxime Ripard
2018-01-30  8:36         ` Maxime Ripard
2018-02-02 15:24         ` Philipp Rossak
2018-02-02 15:24           ` Philipp Rossak
2018-02-02 15:24           ` Philipp Rossak
2018-01-31 22:49   ` kbuild test robot
2018-01-31 22:49     ` kbuild test robot
2018-01-31 22:49     ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 08/16] iio: adc: sun4i-gpadc-iio: rework: add interrupt support Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-31 19:07   ` Quentin Schulz
2018-01-31 19:07     ` Quentin Schulz
2018-01-31 19:07     ` Quentin Schulz
2018-02-02 14:30     ` Philipp Rossak
2018-02-02 14:30       ` Philipp Rossak
2018-02-02 14:30       ` Philipp Rossak
2018-01-31 21:47   ` kbuild test robot
2018-01-31 21:47     ` kbuild test robot
2018-01-31 21:47     ` kbuild test robot
2018-01-28 23:29 ` [PATCH v2 09/16] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:46   ` Maxime Ripard
2018-01-29  9:46     ` Maxime Ripard
2018-01-29  9:46     ` Maxime Ripard
2018-01-31 19:23   ` Quentin Schulz
2018-01-31 19:23     ` Quentin Schulz
2018-01-31 19:23     ` Quentin Schulz
2018-02-02 14:42     ` Philipp Rossak
2018-02-02 14:42       ` Philipp Rossak
2018-02-02 14:42       ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 10/16] iio: adc: sun4i-gpadc-iio: add support for A83T " Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:48   ` Maxime Ripard
2018-01-29  9:48     ` Maxime Ripard
2018-01-29  9:48     ` Maxime Ripard
2018-01-29 11:53     ` Philipp Rossak
2018-01-29 11:53       ` Philipp Rossak
2018-01-29 11:53       ` Philipp Rossak
2018-01-30  8:32       ` Maxime Ripard
2018-01-30  8:32         ` Maxime Ripard
2018-01-28 23:29 ` [PATCH v2 11/16] arm: dts: sunxi-h3-h5: add support for the thermal sensor in H3 and H5 Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:49   ` Maxime Ripard
2018-01-29  9:49     ` Maxime Ripard
2018-01-29  9:49     ` Maxime Ripard
2018-01-29 11:54     ` Philipp Rossak
2018-01-29 11:54       ` Philipp Rossak
2018-01-29 11:54       ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 12/16] arm: dts: sun8i: h3: add support for the thermal sensor in H3 Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 13/16] arm: dts: sun8i: h3: add thermal zone to H3 Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:50   ` Maxime Ripard
2018-01-29  9:50     ` Maxime Ripard
2018-01-29  9:50     ` Maxime Ripard
2018-01-29 11:56     ` Philipp Rossak
2018-01-29 11:56       ` Philipp Rossak
2018-01-29 11:56       ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 14/16] arm: dts: sun8i: h3: enable H3 sid controller Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-29  9:52   ` Maxime Ripard
2018-01-29  9:52     ` Maxime Ripard
2018-01-29  9:52     ` Maxime Ripard
2018-01-29 12:03     ` Philipp Rossak
2018-01-29 12:03       ` Philipp Rossak
2018-01-29 12:03       ` Philipp Rossak
2018-04-19 15:11       ` [linux-sunxi] " Kyle Evans
2018-04-19 15:11         ` Kyle Evans
2018-04-19 15:13         ` Icenowy Zheng
2018-04-19 15:13           ` Icenowy Zheng
2018-04-19 15:13           ` Icenowy Zheng
2018-04-19 15:19           ` Kyle Evans
2018-04-19 15:19             ` Kyle Evans
2018-04-19 15:19             ` Kyle Evans
2018-04-20  9:35             ` Philipp Rossak
2018-04-20  9:35               ` Philipp Rossak
2018-04-20  9:35               ` Philipp Rossak
2018-07-24 17:19               ` [linux-sunxi] " Paul Kocialkowski
2018-07-24 17:19                 ` Paul Kocialkowski
2018-07-24 17:19                 ` Paul Kocialkowski
2018-07-25  9:05                 ` [linux-sunxi] " Emmanuel Vadot
2018-07-25  9:05                   ` Emmanuel Vadot
2018-07-25  9:05                   ` Emmanuel Vadot
2018-07-25  9:05                   ` Emmanuel Vadot
2018-07-25  9:12                   ` Paul Kocialkowski
2018-07-25  9:12                     ` Paul Kocialkowski
2018-07-25  9:12                     ` Paul Kocialkowski
2018-07-25  9:12                     ` Paul Kocialkowski
2018-01-28 23:29 ` [PATCH v2 15/16] arm: dts: sun8i: a83t: add support for the thermal sensor in A83T Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29 ` [PATCH v2 16/16] arm: dts: sun8i: a83t: add thermal zone to A83T Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak
2018-01-28 23:29   ` Philipp Rossak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180128232919.12639-4-embed3d@gmail.com \
    --to=embed3d@gmail.com \
    --cc=clabbe.montjoie@gmail.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edu.molinas@gmail.com \
    --cc=hans.verkuil@cisco.com \
    --cc=icenowy@aosc.io \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=krzk@kernel.org \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mchehab@kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=quentin.schulz@free-electrons.com \
    --cc=rask@formelder.dk \
    --cc=robh+dt@kernel.org \
    --cc=sean@mess.org \
    --cc=singhalsimran0@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.