[PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis

[PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis

[Peter Rosin]

Hi!

Here's a series that is of the "documentation" kind. It fixes things
that don't really need fixing, but the fixes are correct none-the-less
and should prevent possible confusion.

Changes since v1:

- One more fix added to patch 1/3. The size of the rootfs partition
  should be 504MB, as the flash is 512MB total.

Sorry for the noise.

Cheers,
Peter

Peter Rosin (3):
  ARM: dts: at91: nattis: use up-to-date mtd partitions
  ARM: dts: at91: nattis: add lvds-encoder
  ARM: dts: at91: tse850: make the sound dai cell count explicit

 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 58 ++++++++++++++++++++++-------
 arch/arm/boot/dts/at91-tse850-3.dts         |  1 +
 2 files changed, 45 insertions(+), 14 deletions(-)

-- 
2.11.0

[PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis

[Peter Rosin]

Hi!

Here's a series that is of the "documentation" kind. It fixes things
that don't really need fixing, but the fixes are correct none-the-less
and should prevent possible confusion.

Changes since v1:

- One more fix added to patch 1/3. The size of the rootfs partition
  should be 504MB, as the flash is 512MB total.

Sorry for the noise.

Cheers,
Peter

Peter Rosin (3):
  ARM: dts: at91: nattis: use up-to-date mtd partitions
  ARM: dts: at91: nattis: add lvds-encoder
  ARM: dts: at91: tse850: make the sound dai cell count explicit

 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 58 ++++++++++++++++++++++-------
 arch/arm/boot/dts/at91-tse850-3.dts         |  1 +
 2 files changed, 45 insertions(+), 14 deletions(-)

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis

[Peter Rosin]

Hi!

Here's a series that is of the "documentation" kind. It fixes things
that don't really need fixing, but the fixes are correct none-the-less
and should prevent possible confusion.

Changes since v1:

- One more fix added to patch 1/3. The size of the rootfs partition
  should be 504MB, as the flash is 512MB total.

Sorry for the noise.

Cheers,
Peter

Peter Rosin (3):
  ARM: dts: at91: nattis: use up-to-date mtd partitions
  ARM: dts: at91: nattis: add lvds-encoder
  ARM: dts: at91: tse850: make the sound dai cell count explicit

 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 58 ++++++++++++++++++++++-------
 arch/arm/boot/dts/at91-tse850-3.dts         |  1 +
 2 files changed, 45 insertions(+), 14 deletions(-)

-- 
2.11.0

[PATCH v2 1/3] ARM: dts: at91: nattis: use up-to-date mtd partitions

[Peter Rosin]

The nattis currently relies on the cmdline to correctly configure the
MTD partition table, and the one given in the device tree is simply
ignored. Which is fortunate, since the device tree partition table is
bonkers and does not match reality.

So, in order to avoid confusion, fix the device tree partition table
to match what is expected (i.e. what is normally provided on the cmdline).
In particular, the rootfs partition should be mtd6.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 3ea1d26e1c68..03683c1b4240 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -216,29 +216,34 @@
 			reg = <0x0 0x40000>;
 		};
 
-		bootloader@40000 {
-			label = "bootloader";
-			reg = <0x40000 0x80000>;
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
 		};
 
-		bootloaderenv@c0000 {
-			label = "bootloader env";
-			reg = <0xc0000 0xc0000>;
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
 		};
 
-		dtb@180000 {
-			label = "device tree";
-			reg = <0x180000 0x80000>;
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
 		};
 
 		kernel@200000 {
 			label = "kernel";
-			reg = <0x200000 0x600000>;
+			reg = <0x200000 0x500000>;
 		};
 
 		rootfs@800000 {
 			label = "rootfs";
-			reg = <0x800000 0x0f800000>;
+			reg = <0x800000 0x1f800000>;
 		};
 	};
 };
-- 
2.11.0

[PATCH v2 1/3] ARM: dts: at91: nattis: use up-to-date mtd partitions

[Peter Rosin]

The nattis currently relies on the cmdline to correctly configure the
MTD partition table, and the one given in the device tree is simply
ignored. Which is fortunate, since the device tree partition table is
bonkers and does not match reality.

So, in order to avoid confusion, fix the device tree partition table
to match what is expected (i.e. what is normally provided on the cmdline).
In particular, the rootfs partition should be mtd6.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 3ea1d26e1c68..03683c1b4240 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -216,29 +216,34 @@
 			reg = <0x0 0x40000>;
 		};
 
-		bootloader@40000 {
-			label = "bootloader";
-			reg = <0x40000 0x80000>;
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
 		};
 
-		bootloaderenv@c0000 {
-			label = "bootloader env";
-			reg = <0xc0000 0xc0000>;
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
 		};
 
-		dtb@180000 {
-			label = "device tree";
-			reg = <0x180000 0x80000>;
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
 		};
 
 		kernel@200000 {
 			label = "kernel";
-			reg = <0x200000 0x600000>;
+			reg = <0x200000 0x500000>;
 		};
 
 		rootfs@800000 {
 			label = "rootfs";
-			reg = <0x800000 0x0f800000>;
+			reg = <0x800000 0x1f800000>;
 		};
 	};
 };
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/3] ARM: dts: at91: nattis: use up-to-date mtd partitions

[Peter Rosin]

The nattis currently relies on the cmdline to correctly configure the
MTD partition table, and the one given in the device tree is simply
ignored. Which is fortunate, since the device tree partition table is
bonkers and does not match reality.

So, in order to avoid confusion, fix the device tree partition table
to match what is expected (i.e. what is normally provided on the cmdline).
In particular, the rootfs partition should be mtd6.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 3ea1d26e1c68..03683c1b4240 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -216,29 +216,34 @@
 			reg = <0x0 0x40000>;
 		};
 
-		bootloader at 40000 {
-			label = "bootloader";
-			reg = <0x40000 0x80000>;
+		barebox at 40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
 		};
 
-		bootloaderenv at c0000 {
-			label = "bootloader env";
-			reg = <0xc0000 0xc0000>;
+		bareboxenv at c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
 		};
 
-		dtb at 180000 {
-			label = "device tree";
-			reg = <0x180000 0x80000>;
+		bareboxenv2 at 100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree at 180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
 		};
 
 		kernel at 200000 {
 			label = "kernel";
-			reg = <0x200000 0x600000>;
+			reg = <0x200000 0x500000>;
 		};
 
 		rootfs at 800000 {
 			label = "rootfs";
-			reg = <0x800000 0x0f800000>;
+			reg = <0x800000 0x1f800000>;
 		};
 	};
 };
-- 
2.11.0

[PATCH v2 2/3] ARM: dts: at91: nattis: add lvds-encoder

[Peter Rosin]

The lvds encoder chip was omitted by oversight. Add it.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 31 ++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 03683c1b4240..7cedd3ddf0bd 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -109,7 +109,32 @@
 
 		port {
 			panel_input: endpoint {
-				remote-endpoint = <&hlcdc_panel_output>;
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "lvds-encoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
 			};
 		};
 	};
@@ -176,8 +201,8 @@
 			     &pinctrl_lcd_hipow0>;
 
 		port@0 {
-			hlcdc_panel_output: endpoint {
-				remote-endpoint = <&panel_input>;
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
 			};
 		};
 	};
-- 
2.11.0

[PATCH v2 2/3] ARM: dts: at91: nattis: add lvds-encoder

[Peter Rosin]

The lvds encoder chip was omitted by oversight. Add it.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 31 ++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 03683c1b4240..7cedd3ddf0bd 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -109,7 +109,32 @@
 
 		port {
 			panel_input: endpoint {
-				remote-endpoint = <&hlcdc_panel_output>;
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "lvds-encoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port at 0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
 			};
 		};
 	};
@@ -176,8 +201,8 @@
 			     &pinctrl_lcd_hipow0>;
 
 		port at 0 {
-			hlcdc_panel_output: endpoint {
-				remote-endpoint = <&panel_input>;
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
 			};
 		};
 	};
-- 
2.11.0

[PATCH v2 3/3] ARM: dts: at91: tse850: make the sound dai cell count explicit

[Peter Rosin]

The node is referred to as a DAI from the sound node and should
therefore have a #sound-dai-cells property.

Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 arch/arm/boot/dts/at91-tse850-3.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 9b82cc8843e1..16e6e60aa67a 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -234,6 +234,7 @@
 		compatible = "ti,pcm5142";
 
 		reg = <0x4c>;
+		#sound-dai-cells = <0>;
 
 		AVDD-supply = <&reg_3v3>;
 		DVDD-supply = <&reg_3v3>;
-- 
2.11.0

[PATCH v2 3/3] ARM: dts: at91: tse850: make the sound dai cell count explicit

[Peter Rosin]

The node is referred to as a DAI from the sound node and should
therefore have a #sound-dai-cells property.

Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 arch/arm/boot/dts/at91-tse850-3.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 9b82cc8843e1..16e6e60aa67a 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -234,6 +234,7 @@
 		compatible = "ti,pcm5142";
 
 		reg = <0x4c>;
+		#sound-dai-cells = <0>;
 
 		AVDD-supply = <&reg_3v3>;
 		DVDD-supply = <&reg_3v3>;
-- 
2.11.0

Re: [PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis

[Alexandre Belloni]

On 18/01/2018 at 12:46:13 +0100, Peter Rosin wrote:
> Hi!
> 
> Here's a series that is of the "documentation" kind. It fixes things
> that don't really need fixing, but the fixes are correct none-the-less
> and should prevent possible confusion.
> 
> Changes since v1:
> 
> - One more fix added to patch 1/3. The size of the rootfs partition
>   should be 504MB, as the flash is 512MB total.
> 
> Sorry for the noise.
> 

All applied. I'm planning to send that for 4.17 as they are not urgent.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Re: [PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis

[Alexandre Belloni]

On 18/01/2018 at 12:46:13 +0100, Peter Rosin wrote:
> Hi!
> 
> Here's a series that is of the "documentation" kind. It fixes things
> that don't really need fixing, but the fixes are correct none-the-less
> and should prevent possible confusion.
> 
> Changes since v1:
> 
> - One more fix added to patch 1/3. The size of the rootfs partition
>   should be 504MB, as the flash is 512MB total.
> 
> Sorry for the noise.
> 

All applied. I'm planning to send that for 4.17 as they are not urgent.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 0/3] Device tree fixes for Axentia TSE-850 and Nattis

[Alexandre Belloni]

On 18/01/2018 at 12:46:13 +0100, Peter Rosin wrote:
> Hi!
> 
> Here's a series that is of the "documentation" kind. It fixes things
> that don't really need fixing, but the fixes are correct none-the-less
> and should prevent possible confusion.
> 
> Changes since v1:
> 
> - One more fix added to patch 1/3. The size of the rootfs partition
>   should be 504MB, as the flash is 512MB total.
> 
> Sorry for the noise.
> 

All applied. I'm planning to send that for 4.17 as they are not urgent.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com