[PATCH 0/7] SMMUv3 driver

[PATCH 0/7] SMMUv3 driver

[Sameer Goel]

This patch set adds support for the SMMUv3 driver. This is a continuation on
a RFCv4.[1]
The IORT support came from [2]. This RFC has some conflicting defines that
have to be addressed by introducing the linux_compat.h header in IORT patch
set. In any case the SMMU changes apply on top of IORT patches.

List of changes:
- Addition of a linux_compat header.
- Addition of a common header for arm smmu defines.
- Rebase of the SMMUv3 driver to the driver in linux kernel 4.14 rc7.
- New config defines for ARM SMMU drivers.

[1] https://lists.xenproject.org/archives/html/xen-devel/2017-12/msg01294.html
[2] https://lists.xenproject.org/archives/html/xen-devel/2018-01/msg00007.html
Sameer Goel (7):
  Port WARN_ON_ONCE() from Linux
  xen/bitops: Rename LOG_2 to ilog2
  passthrough/arm: Modify SMMU driver to use generic device definition
  Add verbatim copy of arm-smmu-v3.c from Linux
  xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver
  drivers/passthrough/arm: Refactor code for arm smmu drivers
  xen/smmu: Add a new config define for legacy SMMU

 xen/arch/arm/p2m.c                     |    1 +
 xen/arch/arm/xen.lds.S                 |    1 +
 xen/arch/x86/x86_64/asm-offsets.c      |    2 +-
 xen/arch/x86/xen.lds.S                 |    1 +
 xen/drivers/Kconfig                    |    2 +
 xen/drivers/passthrough/arm/Kconfig    |   14 +
 xen/drivers/passthrough/arm/Makefile   |    3 +-
 xen/drivers/passthrough/arm/arm_smmu.h |  125 ++
 xen/drivers/passthrough/arm/smmu-v3.c  | 3625 ++++++++++++++++++++++++++++++++
 xen/drivers/passthrough/arm/smmu.c     |  114 +-
 xen/include/xen/bitops.h               |    2 +-
 xen/include/xen/lib.h                  |   13 +
 xen/include/xen/linux_compat.h         |   84 +
 13 files changed, 3877 insertions(+), 110 deletions(-)
 create mode 100644 xen/drivers/passthrough/arm/Kconfig
 create mode 100644 xen/drivers/passthrough/arm/arm_smmu.h
 create mode 100644 xen/drivers/passthrough/arm/smmu-v3.c
 create mode 100644 xen/include/xen/linux_compat.h

-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

[PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Sameer Goel]

Port WARN_ON_ONCE macro from Linux.

Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
Acked-by: Julien Grall <julien.grall@linaro.org>
---
 xen/arch/arm/xen.lds.S |  1 +
 xen/arch/x86/xen.lds.S |  1 +
 xen/include/xen/lib.h  | 13 +++++++++++++
 3 files changed, 15 insertions(+)

diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S
index b0390180b4..4dc7997cf0 100644
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -87,6 +87,7 @@ SECTIONS
        __end_schedulers_array = .;
        *(.data.rel)
        *(.data.rel.*)
+       *(.data.unlikely)
        CONSTRUCTORS
   } :text
 
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index 095298048f..353ca148ca 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -240,6 +240,7 @@ SECTIONS
        *(.data)
        *(.data.rel)
        *(.data.rel.*)
+       *(.data.unlikely)
        CONSTRUCTORS
   } :text
 
diff --git a/xen/include/xen/lib.h b/xen/include/xen/lib.h
index 1d9771340c..697212a061 100644
--- a/xen/include/xen/lib.h
+++ b/xen/include/xen/lib.h
@@ -11,6 +11,19 @@
 #define BUG_ON(p)  do { if (unlikely(p)) BUG();  } while (0)
 #define WARN_ON(p) do { if (unlikely(p)) WARN(); } while (0)
 
+#define WARN_ON_ONCE(p)                             \
+({                                                  \
+    static bool __section(".data.unlikely") __warned; \
+    int __ret_warn_once = !!(p);                    \
+                                                    \
+    if ( unlikely(__ret_warn_once && !__warned) )     \
+    {                                               \
+        __warned = true;                            \
+        WARN();                                     \
+    }                                               \
+    unlikely(__ret_warn_once);                      \
+})
+
 #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
 /* Force a compilation error if condition is true */
 #define BUILD_BUG_ON(cond) ({ _Static_assert(!(cond), "!(" #cond ")"); })
-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Roger Pau Monné]

On Thu, Feb 08, 2018 at 08:10:49PM -0700, Sameer Goel wrote:
> diff --git a/xen/include/xen/lib.h b/xen/include/xen/lib.h
> index 1d9771340c..697212a061 100644
> --- a/xen/include/xen/lib.h
> +++ b/xen/include/xen/lib.h
> @@ -11,6 +11,19 @@
>  #define BUG_ON(p)  do { if (unlikely(p)) BUG();  } while (0)
>  #define WARN_ON(p) do { if (unlikely(p)) WARN(); } while (0)
>  
> +#define WARN_ON_ONCE(p)                             \
> +({                                                  \
> +    static bool __section(".data.unlikely") __warned; \
> +    int __ret_warn_once = !!(p);                    \
       ^ bool

> +                                                    \
> +    if ( unlikely(__ret_warn_once && !__warned) )     \
> +    {                                               \
> +        __warned = true;                            \
> +        WARN();                                     \
> +    }                                               \
> +    unlikely(__ret_warn_once);                      \

Does this macro really need to return something? It seems weird to me
to allow usages like: if ( WARN_ON_ONCE...

Nit: could you please align the '\'?

Thanks, Roger.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Julien Grall]

Hi,

On 02/09/2018 10:29 AM, Roger Pau Monné wrote:
> On Thu, Feb 08, 2018 at 08:10:49PM -0700, Sameer Goel wrote:
>> diff --git a/xen/include/xen/lib.h b/xen/include/xen/lib.h
>> index 1d9771340c..697212a061 100644
>> --- a/xen/include/xen/lib.h
>> +++ b/xen/include/xen/lib.h
>> @@ -11,6 +11,19 @@
>>   #define BUG_ON(p)  do { if (unlikely(p)) BUG();  } while (0)
>>   #define WARN_ON(p) do { if (unlikely(p)) WARN(); } while (0)
>>   
>> +#define WARN_ON_ONCE(p)                             \
>> +({                                                  \
>> +    static bool __section(".data.unlikely") __warned; \
>> +    int __ret_warn_once = !!(p);                    \
>         ^ bool
> 
>> +                                                    \
>> +    if ( unlikely(__ret_warn_once && !__warned) )     \
>> +    {                                               \
>> +        __warned = true;                            \
>> +        WARN();                                     \
>> +    }                                               \
>> +    unlikely(__ret_warn_once);                      \
> 
> Does this macro really need to return something? It seems weird to me
> to allow usages like: if ( WARN_ON_ONCE...

This construct is used in Linux (included in the driver ported):

if (WARN_ON_ONCE(fwspec->iommu_priv)) {
      master = fwspec->iommu_priv;
      smmu = master->smmu;
} else {
....
}

IHMO the makes the code nicer to read over:

WARN_ON_ONCE(...)
if ( ... ) {
} else {
}

Cheers,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Roger Pau Monné]

On Fri, Feb 09, 2018 at 10:45:25AM +0000, Julien Grall wrote:
> Hi,
> 
> On 02/09/2018 10:29 AM, Roger Pau Monné wrote:
> > On Thu, Feb 08, 2018 at 08:10:49PM -0700, Sameer Goel wrote:
> > > diff --git a/xen/include/xen/lib.h b/xen/include/xen/lib.h
> > > index 1d9771340c..697212a061 100644
> > > --- a/xen/include/xen/lib.h
> > > +++ b/xen/include/xen/lib.h
> > > @@ -11,6 +11,19 @@
> > >   #define BUG_ON(p)  do { if (unlikely(p)) BUG();  } while (0)
> > >   #define WARN_ON(p) do { if (unlikely(p)) WARN(); } while (0)
> > > +#define WARN_ON_ONCE(p)                             \
> > > +({                                                  \
> > > +    static bool __section(".data.unlikely") __warned; \
> > > +    int __ret_warn_once = !!(p);                    \
> >         ^ bool
> > 
> > > +                                                    \
> > > +    if ( unlikely(__ret_warn_once && !__warned) )     \
> > > +    {                                               \
> > > +        __warned = true;                            \
> > > +        WARN();                                     \
> > > +    }                                               \
> > > +    unlikely(__ret_warn_once);                      \
> > 
> > Does this macro really need to return something? It seems weird to me
> > to allow usages like: if ( WARN_ON_ONCE...
> 
> This construct is used in Linux (included in the driver ported):
> 
> if (WARN_ON_ONCE(fwspec->iommu_priv)) {
>      master = fwspec->iommu_priv;
>      smmu = master->smmu;
> } else {
> ....
> }
> 
> IHMO the makes the code nicer to read over:

OK, if that's intended I'm fine with it, just wanted to check.

Thanks, Roger.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Jan Beulich]

>>> On 09.02.18 at 11:47, <roger.pau@citrix.com> wrote:
> On Fri, Feb 09, 2018 at 10:45:25AM +0000, Julien Grall wrote:
>> Hi,
>> 
>> On 02/09/2018 10:29 AM, Roger Pau Monné wrote:
>> > On Thu, Feb 08, 2018 at 08:10:49PM -0700, Sameer Goel wrote:
>> > > diff --git a/xen/include/xen/lib.h b/xen/include/xen/lib.h
>> > > index 1d9771340c..697212a061 100644
>> > > --- a/xen/include/xen/lib.h
>> > > +++ b/xen/include/xen/lib.h
>> > > @@ -11,6 +11,19 @@
>> > >   #define BUG_ON(p)  do { if (unlikely(p)) BUG();  } while (0)
>> > >   #define WARN_ON(p) do { if (unlikely(p)) WARN(); } while (0)
>> > > +#define WARN_ON_ONCE(p)                             \
>> > > +({                                                  \
>> > > +    static bool __section(".data.unlikely") __warned; \
>> > > +    int __ret_warn_once = !!(p);                    \
>> >         ^ bool
>> > 
>> > > +                                                    \
>> > > +    if ( unlikely(__ret_warn_once && !__warned) )     \
>> > > +    {                                               \
>> > > +        __warned = true;                            \
>> > > +        WARN();                                     \
>> > > +    }                                               \
>> > > +    unlikely(__ret_warn_once);                      \
>> > 
>> > Does this macro really need to return something? It seems weird to me
>> > to allow usages like: if ( WARN_ON_ONCE...
>> 
>> This construct is used in Linux (included in the driver ported):
>> 
>> if (WARN_ON_ONCE(fwspec->iommu_priv)) {
>>      master = fwspec->iommu_priv;
>>      smmu = master->smmu;
>> } else {
>> ....
>> }
>> 
>> IHMO the makes the code nicer to read over:
> 
> OK, if that's intended I'm fine with it, just wanted to check.

But WARN_ON() should then be given the same property, I think.

Jan

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Sameer Goel]

On 2/13/2018 2:46 AM, Jan Beulich wrote:
>>>> On 09.02.18 at 11:47, <roger.pau@citrix.com> wrote:
>> On Fri, Feb 09, 2018 at 10:45:25AM +0000, Julien Grall wrote:
>>> Hi,
>>>
>>> On 02/09/2018 10:29 AM, Roger Pau Monné wrote:
>>>> On Thu, Feb 08, 2018 at 08:10:49PM -0700, Sameer Goel wrote:
>>>>> diff --git a/xen/include/xen/lib.h b/xen/include/xen/lib.h
>>>>> index 1d9771340c..697212a061 100644
>>>>> --- a/xen/include/xen/lib.h
>>>>> +++ b/xen/include/xen/lib.h
>>>>> @@ -11,6 +11,19 @@
>>>>>   #define BUG_ON(p)  do { if (unlikely(p)) BUG();  } while (0)
>>>>>   #define WARN_ON(p) do { if (unlikely(p)) WARN(); } while (0)
>>>>> +#define WARN_ON_ONCE(p)                             \
>>>>> +({                                                  \
>>>>> +    static bool __section(".data.unlikely") __warned; \
>>>>> +    int __ret_warn_once = !!(p);                    \
>>>>         ^ bool
>>>>
>>>>> +                                                    \
>>>>> +    if ( unlikely(__ret_warn_once && !__warned) )     \
>>>>> +    {                                               \
>>>>> +        __warned = true;                            \
>>>>> +        WARN();                                     \
>>>>> +    }                                               \
>>>>> +    unlikely(__ret_warn_once);                      \
>>>> Does this macro really need to return something? It seems weird to me
>>>> to allow usages like: if ( WARN_ON_ONCE...
>>> This construct is used in Linux (included in the driver ported):
>>>
>>> if (WARN_ON_ONCE(fwspec->iommu_priv)) {
>>>      master = fwspec->iommu_priv;
>>>      smmu = master->smmu;
>>> } else {
>>> ....
>>> }
>>>
>>> IHMO the makes the code nicer to read over:
>> OK, if that's intended I'm fine with it, just wanted to check.
> But WARN_ON() should then be given the same property, I think.

Not changing any already defined macros in Xen.
>
> Jan
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xenproject.org
> https://lists.xenproject.org/mailman/listinfo/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Wei Liu]

On Thu, Feb 08, 2018 at 08:10:49PM -0700, Sameer Goel wrote:
>  
> +#define WARN_ON_ONCE(p)                             \
> +({                                                  \
> +    static bool __section(".data.unlikely") __warned; \
> +    int __ret_warn_once = !!(p);                    \
> +                                                    \
> +    if ( unlikely(__ret_warn_once && !__warned) )     \
> +    {                                               \
> +        __warned = true;                            \

Please don't mix bool and int type.

Wei.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 1/7] Port WARN_ON_ONCE() from Linux

[Jan Beulich]

>>> On 09.02.18 at 04:10, <sameer.goel@linaro.org> wrote:
> Port WARN_ON_ONCE macro from Linux.
> 
> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
> Acked-by: Julien Grall <julien.grall@linaro.org>
> ---
>  xen/arch/arm/xen.lds.S |  1 +
>  xen/arch/x86/xen.lds.S |  1 +
>  xen/include/xen/lib.h  | 13 +++++++++++++
>  3 files changed, 15 insertions(+)
> 
> diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S
> index b0390180b4..4dc7997cf0 100644
> --- a/xen/arch/arm/xen.lds.S
> +++ b/xen/arch/arm/xen.lds.S
> @@ -87,6 +87,7 @@ SECTIONS
>         __end_schedulers_array = .;
>         *(.data.rel)
>         *(.data.rel.*)
> +       *(.data.unlikely)
>         CONSTRUCTORS
>    } :text
>  
> diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
> index 095298048f..353ca148ca 100644
> --- a/xen/arch/x86/xen.lds.S
> +++ b/xen/arch/x86/xen.lds.S
> @@ -240,6 +240,7 @@ SECTIONS
>         *(.data)
>         *(.data.rel)
>         *(.data.rel.*)
> +       *(.data.unlikely)
>         CONSTRUCTORS
>    } :text
>  
> diff --git a/xen/include/xen/lib.h b/xen/include/xen/lib.h
> index 1d9771340c..697212a061 100644
> --- a/xen/include/xen/lib.h
> +++ b/xen/include/xen/lib.h
> @@ -11,6 +11,19 @@
>  #define BUG_ON(p)  do { if (unlikely(p)) BUG();  } while (0)
>  #define WARN_ON(p) do { if (unlikely(p)) WARN(); } while (0)
>  
> +#define WARN_ON_ONCE(p)                             \
> +({                                                  \
> +    static bool __section(".data.unlikely") __warned; \
> +    int __ret_warn_once = !!(p);                    \

Please don't introduce new name space violations (read: no
leading underscores here; use trailing one if need be).

Jan


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

[PATCH 2/7] xen/bitops: Rename LOG_2 to ilog2

[Sameer Goel]

Changing the name of the macro from LOG_2 to ilog2.This makes the function name
similar to its Linux counterpart. Since, this is not used in multiple places,
the code churn is minimal.

This change helps in porting unchanged code from Linux.

Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
---
 xen/arch/x86/x86_64/asm-offsets.c | 2 +-
 xen/include/xen/bitops.h          | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/xen/arch/x86/x86_64/asm-offsets.c b/xen/arch/x86/x86_64/asm-offsets.c
index 51be528f89..e6d4147525 100644
--- a/xen/arch/x86/x86_64/asm-offsets.c
+++ b/xen/arch/x86/x86_64/asm-offsets.c
@@ -166,7 +166,7 @@ void __dummy__(void)
     BLANK();
 #endif
 
-    DEFINE(IRQSTAT_shift, LOG_2(sizeof(irq_cpustat_t)));
+    DEFINE(IRQSTAT_shift, ilog2(sizeof(irq_cpustat_t)));
     OFFSET(IRQSTAT_softirq_pending, irq_cpustat_t, __softirq_pending);
     BLANK();
 
diff --git a/xen/include/xen/bitops.h b/xen/include/xen/bitops.h
index e2019b02a3..a103e49089 100644
--- a/xen/include/xen/bitops.h
+++ b/xen/include/xen/bitops.h
@@ -223,7 +223,7 @@ static inline __u32 ror32(__u32 word, unsigned int shift)
 #define __L4(_x)  (((_x) & 0x0000000c) ? ( 2 + __L2( (_x)>> 2)) : __L2( _x))
 #define __L8(_x)  (((_x) & 0x000000f0) ? ( 4 + __L4( (_x)>> 4)) : __L4( _x))
 #define __L16(_x) (((_x) & 0x0000ff00) ? ( 8 + __L8( (_x)>> 8)) : __L8( _x))
-#define LOG_2(_x) (((_x) & 0xffff0000) ? (16 + __L16((_x)>>16)) : __L16(_x))
+#define ilog2(_x) (((_x) & 0xffff0000) ? (16 + __L16((_x)>>16)) : __L16(_x))
 
 /**
  * for_each_set_bit - iterate over every set bit in a memory region
-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 2/7] xen/bitops: Rename LOG_2 to ilog2

[Wei Liu]

On Thu, Feb 08, 2018 at 08:10:50PM -0700, Sameer Goel wrote:
> Changing the name of the macro from LOG_2 to ilog2.This makes the function name
> similar to its Linux counterpart. Since, this is not used in multiple places,
> the code churn is minimal.
> 
> This change helps in porting unchanged code from Linux.
> 
> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>

Reviewed-by: Wei Liu <wei.liu2@citrix.com>

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

[PATCH 3/7] passthrough/arm: Modify SMMU driver to use generic device definition

[Sameer Goel]

Modify the SMMU code to use generic device instead of dt_device_node for
functions that can be used for ACPI based systems too.

Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
Acked-by: Julien Grall <julien.grall@linaro.org>
---
 xen/drivers/passthrough/arm/smmu.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/xen/drivers/passthrough/arm/smmu.c b/xen/drivers/passthrough/arm/smmu.c
index 45acb89380..ad956d5b8d 100644
--- a/xen/drivers/passthrough/arm/smmu.c
+++ b/xen/drivers/passthrough/arm/smmu.c
@@ -76,7 +76,7 @@ struct resource
 
 #define resource_size(res) (res)->size;
 
-#define platform_device dt_device_node
+#define platform_device device
 
 #define IORESOURCE_MEM 0
 #define IORESOURCE_IRQ 1
@@ -97,12 +97,12 @@ static struct resource *platform_get_resource(struct platform_device *pdev,
 
 	switch (type) {
 	case IORESOURCE_MEM:
-		ret = dt_device_get_address(pdev, num, &res.addr, &res.size);
+		ret = dt_device_get_address(dev_to_dt(pdev), num, &res.addr, &res.size);
 
 		return ((ret) ? NULL : &res);
 
 	case IORESOURCE_IRQ:
-		ret = platform_get_irq(pdev, num);
+		ret = platform_get_irq(dev_to_dt(pdev), num);
 		if (ret < 0)
 			return NULL;
 
@@ -2286,7 +2286,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id;
 	struct resource *res;
 	struct arm_smmu_device *smmu;
-	struct device *dev = &pdev->dev;
+	struct device *dev = pdev;
 	struct rb_node *node;
 	struct of_phandle_args masterspec;
 	int num_irqs, i, err;
@@ -2339,7 +2339,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < num_irqs; ++i) {
-		int irq = platform_get_irq(pdev, i);
+		int irq = platform_get_irq(dev_to_dt(pdev), i);
 
 		if (irq < 0) {
 			dev_err(dev, "failed to get irq index %d\n", i);
@@ -2820,7 +2820,7 @@ static __init int arm_smmu_dt_init(struct dt_device_node *dev,
 	 */
 	dt_device_set_used_by(dev, DOMID_XEN);
 
-	rc = arm_smmu_device_dt_probe(dev);
+	rc = arm_smmu_device_dt_probe(dt_to_dev(dev));
 	if (rc)
 		return rc;
 
-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

[PATCH 4/7] Add verbatim copy of arm-smmu-v3.c from Linux

[Sameer Goel]

Based on commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
This is a verbatim snapshot of arm-smmu-v3.c from Linux kernel source
code.
No Xen code has been added and the file is not built.

Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
---
 xen/drivers/passthrough/arm/smmu-v3.c | 2885 +++++++++++++++++++++++++++++++++
 1 file changed, 2885 insertions(+)
 create mode 100644 xen/drivers/passthrough/arm/smmu-v3.c

diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
new file mode 100644
index 0000000000..e67ba6c40f
--- /dev/null
+++ b/xen/drivers/passthrough/arm/smmu-v3.c
@@ -0,0 +1,2885 @@
+/*
+ * IOMMU API for ARM architected SMMUv3 implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ *
+ * This driver is powered by bad coffee and bombay mix.
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_iort.h>
+#include <linux/delay.h>
+#include <linux/dma-iommu.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_iommu.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <linux/amba/bus.h>
+
+#include "io-pgtable.h"
+
+/* MMIO registers */
+#define ARM_SMMU_IDR0			0x0
+#define IDR0_ST_LVL_SHIFT		27
+#define IDR0_ST_LVL_MASK		0x3
+#define IDR0_ST_LVL_2LVL		(1 << IDR0_ST_LVL_SHIFT)
+#define IDR0_STALL_MODEL_SHIFT		24
+#define IDR0_STALL_MODEL_MASK		0x3
+#define IDR0_STALL_MODEL_STALL		(0 << IDR0_STALL_MODEL_SHIFT)
+#define IDR0_STALL_MODEL_FORCE		(2 << IDR0_STALL_MODEL_SHIFT)
+#define IDR0_TTENDIAN_SHIFT		21
+#define IDR0_TTENDIAN_MASK		0x3
+#define IDR0_TTENDIAN_LE		(2 << IDR0_TTENDIAN_SHIFT)
+#define IDR0_TTENDIAN_BE		(3 << IDR0_TTENDIAN_SHIFT)
+#define IDR0_TTENDIAN_MIXED		(0 << IDR0_TTENDIAN_SHIFT)
+#define IDR0_CD2L			(1 << 19)
+#define IDR0_VMID16			(1 << 18)
+#define IDR0_PRI			(1 << 16)
+#define IDR0_SEV			(1 << 14)
+#define IDR0_MSI			(1 << 13)
+#define IDR0_ASID16			(1 << 12)
+#define IDR0_ATS			(1 << 10)
+#define IDR0_HYP			(1 << 9)
+#define IDR0_COHACC			(1 << 4)
+#define IDR0_TTF_SHIFT			2
+#define IDR0_TTF_MASK			0x3
+#define IDR0_TTF_AARCH64		(2 << IDR0_TTF_SHIFT)
+#define IDR0_TTF_AARCH32_64		(3 << IDR0_TTF_SHIFT)
+#define IDR0_S1P			(1 << 1)
+#define IDR0_S2P			(1 << 0)
+
+#define ARM_SMMU_IDR1			0x4
+#define IDR1_TABLES_PRESET		(1 << 30)
+#define IDR1_QUEUES_PRESET		(1 << 29)
+#define IDR1_REL			(1 << 28)
+#define IDR1_CMDQ_SHIFT			21
+#define IDR1_CMDQ_MASK			0x1f
+#define IDR1_EVTQ_SHIFT			16
+#define IDR1_EVTQ_MASK			0x1f
+#define IDR1_PRIQ_SHIFT			11
+#define IDR1_PRIQ_MASK			0x1f
+#define IDR1_SSID_SHIFT			6
+#define IDR1_SSID_MASK			0x1f
+#define IDR1_SID_SHIFT			0
+#define IDR1_SID_MASK			0x3f
+
+#define ARM_SMMU_IDR5			0x14
+#define IDR5_STALL_MAX_SHIFT		16
+#define IDR5_STALL_MAX_MASK		0xffff
+#define IDR5_GRAN64K			(1 << 6)
+#define IDR5_GRAN16K			(1 << 5)
+#define IDR5_GRAN4K			(1 << 4)
+#define IDR5_OAS_SHIFT			0
+#define IDR5_OAS_MASK			0x7
+#define IDR5_OAS_32_BIT			(0 << IDR5_OAS_SHIFT)
+#define IDR5_OAS_36_BIT			(1 << IDR5_OAS_SHIFT)
+#define IDR5_OAS_40_BIT			(2 << IDR5_OAS_SHIFT)
+#define IDR5_OAS_42_BIT			(3 << IDR5_OAS_SHIFT)
+#define IDR5_OAS_44_BIT			(4 << IDR5_OAS_SHIFT)
+#define IDR5_OAS_48_BIT			(5 << IDR5_OAS_SHIFT)
+
+#define ARM_SMMU_CR0			0x20
+#define CR0_CMDQEN			(1 << 3)
+#define CR0_EVTQEN			(1 << 2)
+#define CR0_PRIQEN			(1 << 1)
+#define CR0_SMMUEN			(1 << 0)
+
+#define ARM_SMMU_CR0ACK			0x24
+
+#define ARM_SMMU_CR1			0x28
+#define CR1_SH_NSH			0
+#define CR1_SH_OSH			2
+#define CR1_SH_ISH			3
+#define CR1_CACHE_NC			0
+#define CR1_CACHE_WB			1
+#define CR1_CACHE_WT			2
+#define CR1_TABLE_SH_SHIFT		10
+#define CR1_TABLE_OC_SHIFT		8
+#define CR1_TABLE_IC_SHIFT		6
+#define CR1_QUEUE_SH_SHIFT		4
+#define CR1_QUEUE_OC_SHIFT		2
+#define CR1_QUEUE_IC_SHIFT		0
+
+#define ARM_SMMU_CR2			0x2c
+#define CR2_PTM				(1 << 2)
+#define CR2_RECINVSID			(1 << 1)
+#define CR2_E2H				(1 << 0)
+
+#define ARM_SMMU_GBPA			0x44
+#define GBPA_ABORT			(1 << 20)
+#define GBPA_UPDATE			(1 << 31)
+
+#define ARM_SMMU_IRQ_CTRL		0x50
+#define IRQ_CTRL_EVTQ_IRQEN		(1 << 2)
+#define IRQ_CTRL_PRIQ_IRQEN		(1 << 1)
+#define IRQ_CTRL_GERROR_IRQEN		(1 << 0)
+
+#define ARM_SMMU_IRQ_CTRLACK		0x54
+
+#define ARM_SMMU_GERROR			0x60
+#define GERROR_SFM_ERR			(1 << 8)
+#define GERROR_MSI_GERROR_ABT_ERR	(1 << 7)
+#define GERROR_MSI_PRIQ_ABT_ERR		(1 << 6)
+#define GERROR_MSI_EVTQ_ABT_ERR		(1 << 5)
+#define GERROR_MSI_CMDQ_ABT_ERR		(1 << 4)
+#define GERROR_PRIQ_ABT_ERR		(1 << 3)
+#define GERROR_EVTQ_ABT_ERR		(1 << 2)
+#define GERROR_CMDQ_ERR			(1 << 0)
+#define GERROR_ERR_MASK			0xfd
+
+#define ARM_SMMU_GERRORN		0x64
+
+#define ARM_SMMU_GERROR_IRQ_CFG0	0x68
+#define ARM_SMMU_GERROR_IRQ_CFG1	0x70
+#define ARM_SMMU_GERROR_IRQ_CFG2	0x74
+
+#define ARM_SMMU_STRTAB_BASE		0x80
+#define STRTAB_BASE_RA			(1UL << 62)
+#define STRTAB_BASE_ADDR_SHIFT		6
+#define STRTAB_BASE_ADDR_MASK		0x3ffffffffffUL
+
+#define ARM_SMMU_STRTAB_BASE_CFG	0x88
+#define STRTAB_BASE_CFG_LOG2SIZE_SHIFT	0
+#define STRTAB_BASE_CFG_LOG2SIZE_MASK	0x3f
+#define STRTAB_BASE_CFG_SPLIT_SHIFT	6
+#define STRTAB_BASE_CFG_SPLIT_MASK	0x1f
+#define STRTAB_BASE_CFG_FMT_SHIFT	16
+#define STRTAB_BASE_CFG_FMT_MASK	0x3
+#define STRTAB_BASE_CFG_FMT_LINEAR	(0 << STRTAB_BASE_CFG_FMT_SHIFT)
+#define STRTAB_BASE_CFG_FMT_2LVL	(1 << STRTAB_BASE_CFG_FMT_SHIFT)
+
+#define ARM_SMMU_CMDQ_BASE		0x90
+#define ARM_SMMU_CMDQ_PROD		0x98
+#define ARM_SMMU_CMDQ_CONS		0x9c
+
+#define ARM_SMMU_EVTQ_BASE		0xa0
+#define ARM_SMMU_EVTQ_PROD		0x100a8
+#define ARM_SMMU_EVTQ_CONS		0x100ac
+#define ARM_SMMU_EVTQ_IRQ_CFG0		0xb0
+#define ARM_SMMU_EVTQ_IRQ_CFG1		0xb8
+#define ARM_SMMU_EVTQ_IRQ_CFG2		0xbc
+
+#define ARM_SMMU_PRIQ_BASE		0xc0
+#define ARM_SMMU_PRIQ_PROD		0x100c8
+#define ARM_SMMU_PRIQ_CONS		0x100cc
+#define ARM_SMMU_PRIQ_IRQ_CFG0		0xd0
+#define ARM_SMMU_PRIQ_IRQ_CFG1		0xd8
+#define ARM_SMMU_PRIQ_IRQ_CFG2		0xdc
+
+/* Common MSI config fields */
+#define MSI_CFG0_ADDR_SHIFT		2
+#define MSI_CFG0_ADDR_MASK		0x3fffffffffffUL
+#define MSI_CFG2_SH_SHIFT		4
+#define MSI_CFG2_SH_NSH			(0UL << MSI_CFG2_SH_SHIFT)
+#define MSI_CFG2_SH_OSH			(2UL << MSI_CFG2_SH_SHIFT)
+#define MSI_CFG2_SH_ISH			(3UL << MSI_CFG2_SH_SHIFT)
+#define MSI_CFG2_MEMATTR_SHIFT		0
+#define MSI_CFG2_MEMATTR_DEVICE_nGnRE	(0x1 << MSI_CFG2_MEMATTR_SHIFT)
+
+#define Q_IDX(q, p)			((p) & ((1 << (q)->max_n_shift) - 1))
+#define Q_WRP(q, p)			((p) & (1 << (q)->max_n_shift))
+#define Q_OVERFLOW_FLAG			(1 << 31)
+#define Q_OVF(q, p)			((p) & Q_OVERFLOW_FLAG)
+#define Q_ENT(q, p)			((q)->base +			\
+					 Q_IDX(q, p) * (q)->ent_dwords)
+
+#define Q_BASE_RWA			(1UL << 62)
+#define Q_BASE_ADDR_SHIFT		5
+#define Q_BASE_ADDR_MASK		0xfffffffffffUL
+#define Q_BASE_LOG2SIZE_SHIFT		0
+#define Q_BASE_LOG2SIZE_MASK		0x1fUL
+
+/*
+ * Stream table.
+ *
+ * Linear: Enough to cover 1 << IDR1.SIDSIZE entries
+ * 2lvl: 128k L1 entries,
+ *       256 lazy entries per table (each table covers a PCI bus)
+ */
+#define STRTAB_L1_SZ_SHIFT		20
+#define STRTAB_SPLIT			8
+
+#define STRTAB_L1_DESC_DWORDS		1
+#define STRTAB_L1_DESC_SPAN_SHIFT	0
+#define STRTAB_L1_DESC_SPAN_MASK	0x1fUL
+#define STRTAB_L1_DESC_L2PTR_SHIFT	6
+#define STRTAB_L1_DESC_L2PTR_MASK	0x3ffffffffffUL
+
+#define STRTAB_STE_DWORDS		8
+#define STRTAB_STE_0_V			(1UL << 0)
+#define STRTAB_STE_0_CFG_SHIFT		1
+#define STRTAB_STE_0_CFG_MASK		0x7UL
+#define STRTAB_STE_0_CFG_ABORT		(0UL << STRTAB_STE_0_CFG_SHIFT)
+#define STRTAB_STE_0_CFG_BYPASS		(4UL << STRTAB_STE_0_CFG_SHIFT)
+#define STRTAB_STE_0_CFG_S1_TRANS	(5UL << STRTAB_STE_0_CFG_SHIFT)
+#define STRTAB_STE_0_CFG_S2_TRANS	(6UL << STRTAB_STE_0_CFG_SHIFT)
+
+#define STRTAB_STE_0_S1FMT_SHIFT	4
+#define STRTAB_STE_0_S1FMT_LINEAR	(0UL << STRTAB_STE_0_S1FMT_SHIFT)
+#define STRTAB_STE_0_S1CTXPTR_SHIFT	6
+#define STRTAB_STE_0_S1CTXPTR_MASK	0x3ffffffffffUL
+#define STRTAB_STE_0_S1CDMAX_SHIFT	59
+#define STRTAB_STE_0_S1CDMAX_MASK	0x1fUL
+
+#define STRTAB_STE_1_S1C_CACHE_NC	0UL
+#define STRTAB_STE_1_S1C_CACHE_WBRA	1UL
+#define STRTAB_STE_1_S1C_CACHE_WT	2UL
+#define STRTAB_STE_1_S1C_CACHE_WB	3UL
+#define STRTAB_STE_1_S1C_SH_NSH		0UL
+#define STRTAB_STE_1_S1C_SH_OSH		2UL
+#define STRTAB_STE_1_S1C_SH_ISH		3UL
+#define STRTAB_STE_1_S1CIR_SHIFT	2
+#define STRTAB_STE_1_S1COR_SHIFT	4
+#define STRTAB_STE_1_S1CSH_SHIFT	6
+
+#define STRTAB_STE_1_S1STALLD		(1UL << 27)
+
+#define STRTAB_STE_1_EATS_ABT		0UL
+#define STRTAB_STE_1_EATS_TRANS		1UL
+#define STRTAB_STE_1_EATS_S1CHK		2UL
+#define STRTAB_STE_1_EATS_SHIFT		28
+
+#define STRTAB_STE_1_STRW_NSEL1		0UL
+#define STRTAB_STE_1_STRW_EL2		2UL
+#define STRTAB_STE_1_STRW_SHIFT		30
+
+#define STRTAB_STE_1_SHCFG_INCOMING	1UL
+#define STRTAB_STE_1_SHCFG_SHIFT	44
+
+#define STRTAB_STE_2_S2VMID_SHIFT	0
+#define STRTAB_STE_2_S2VMID_MASK	0xffffUL
+#define STRTAB_STE_2_VTCR_SHIFT		32
+#define STRTAB_STE_2_VTCR_MASK		0x7ffffUL
+#define STRTAB_STE_2_S2AA64		(1UL << 51)
+#define STRTAB_STE_2_S2ENDI		(1UL << 52)
+#define STRTAB_STE_2_S2PTW		(1UL << 54)
+#define STRTAB_STE_2_S2R		(1UL << 58)
+
+#define STRTAB_STE_3_S2TTB_SHIFT	4
+#define STRTAB_STE_3_S2TTB_MASK		0xfffffffffffUL
+
+/* Context descriptor (stage-1 only) */
+#define CTXDESC_CD_DWORDS		8
+#define CTXDESC_CD_0_TCR_T0SZ_SHIFT	0
+#define ARM64_TCR_T0SZ_SHIFT		0
+#define ARM64_TCR_T0SZ_MASK		0x1fUL
+#define CTXDESC_CD_0_TCR_TG0_SHIFT	6
+#define ARM64_TCR_TG0_SHIFT		14
+#define ARM64_TCR_TG0_MASK		0x3UL
+#define CTXDESC_CD_0_TCR_IRGN0_SHIFT	8
+#define ARM64_TCR_IRGN0_SHIFT		8
+#define ARM64_TCR_IRGN0_MASK		0x3UL
+#define CTXDESC_CD_0_TCR_ORGN0_SHIFT	10
+#define ARM64_TCR_ORGN0_SHIFT		10
+#define ARM64_TCR_ORGN0_MASK		0x3UL
+#define CTXDESC_CD_0_TCR_SH0_SHIFT	12
+#define ARM64_TCR_SH0_SHIFT		12
+#define ARM64_TCR_SH0_MASK		0x3UL
+#define CTXDESC_CD_0_TCR_EPD0_SHIFT	14
+#define ARM64_TCR_EPD0_SHIFT		7
+#define ARM64_TCR_EPD0_MASK		0x1UL
+#define CTXDESC_CD_0_TCR_EPD1_SHIFT	30
+#define ARM64_TCR_EPD1_SHIFT		23
+#define ARM64_TCR_EPD1_MASK		0x1UL
+
+#define CTXDESC_CD_0_ENDI		(1UL << 15)
+#define CTXDESC_CD_0_V			(1UL << 31)
+
+#define CTXDESC_CD_0_TCR_IPS_SHIFT	32
+#define ARM64_TCR_IPS_SHIFT		32
+#define ARM64_TCR_IPS_MASK		0x7UL
+#define CTXDESC_CD_0_TCR_TBI0_SHIFT	38
+#define ARM64_TCR_TBI0_SHIFT		37
+#define ARM64_TCR_TBI0_MASK		0x1UL
+
+#define CTXDESC_CD_0_AA64		(1UL << 41)
+#define CTXDESC_CD_0_R			(1UL << 45)
+#define CTXDESC_CD_0_A			(1UL << 46)
+#define CTXDESC_CD_0_ASET_SHIFT		47
+#define CTXDESC_CD_0_ASET_SHARED	(0UL << CTXDESC_CD_0_ASET_SHIFT)
+#define CTXDESC_CD_0_ASET_PRIVATE	(1UL << CTXDESC_CD_0_ASET_SHIFT)
+#define CTXDESC_CD_0_ASID_SHIFT		48
+#define CTXDESC_CD_0_ASID_MASK		0xffffUL
+
+#define CTXDESC_CD_1_TTB0_SHIFT		4
+#define CTXDESC_CD_1_TTB0_MASK		0xfffffffffffUL
+
+#define CTXDESC_CD_3_MAIR_SHIFT		0
+
+/* Convert between AArch64 (CPU) TCR format and SMMU CD format */
+#define ARM_SMMU_TCR2CD(tcr, fld)					\
+	(((tcr) >> ARM64_TCR_##fld##_SHIFT & ARM64_TCR_##fld##_MASK)	\
+	 << CTXDESC_CD_0_TCR_##fld##_SHIFT)
+
+/* Command queue */
+#define CMDQ_ENT_DWORDS			2
+#define CMDQ_MAX_SZ_SHIFT		8
+
+#define CMDQ_ERR_SHIFT			24
+#define CMDQ_ERR_MASK			0x7f
+#define CMDQ_ERR_CERROR_NONE_IDX	0
+#define CMDQ_ERR_CERROR_ILL_IDX		1
+#define CMDQ_ERR_CERROR_ABT_IDX		2
+
+#define CMDQ_0_OP_SHIFT			0
+#define CMDQ_0_OP_MASK			0xffUL
+#define CMDQ_0_SSV			(1UL << 11)
+
+#define CMDQ_PREFETCH_0_SID_SHIFT	32
+#define CMDQ_PREFETCH_1_SIZE_SHIFT	0
+#define CMDQ_PREFETCH_1_ADDR_MASK	~0xfffUL
+
+#define CMDQ_CFGI_0_SID_SHIFT		32
+#define CMDQ_CFGI_0_SID_MASK		0xffffffffUL
+#define CMDQ_CFGI_1_LEAF		(1UL << 0)
+#define CMDQ_CFGI_1_RANGE_SHIFT		0
+#define CMDQ_CFGI_1_RANGE_MASK		0x1fUL
+
+#define CMDQ_TLBI_0_VMID_SHIFT		32
+#define CMDQ_TLBI_0_ASID_SHIFT		48
+#define CMDQ_TLBI_1_LEAF		(1UL << 0)
+#define CMDQ_TLBI_1_VA_MASK		~0xfffUL
+#define CMDQ_TLBI_1_IPA_MASK		0xfffffffff000UL
+
+#define CMDQ_PRI_0_SSID_SHIFT		12
+#define CMDQ_PRI_0_SSID_MASK		0xfffffUL
+#define CMDQ_PRI_0_SID_SHIFT		32
+#define CMDQ_PRI_0_SID_MASK		0xffffffffUL
+#define CMDQ_PRI_1_GRPID_SHIFT		0
+#define CMDQ_PRI_1_GRPID_MASK		0x1ffUL
+#define CMDQ_PRI_1_RESP_SHIFT		12
+#define CMDQ_PRI_1_RESP_DENY		(0UL << CMDQ_PRI_1_RESP_SHIFT)
+#define CMDQ_PRI_1_RESP_FAIL		(1UL << CMDQ_PRI_1_RESP_SHIFT)
+#define CMDQ_PRI_1_RESP_SUCC		(2UL << CMDQ_PRI_1_RESP_SHIFT)
+
+#define CMDQ_SYNC_0_CS_SHIFT		12
+#define CMDQ_SYNC_0_CS_NONE		(0UL << CMDQ_SYNC_0_CS_SHIFT)
+#define CMDQ_SYNC_0_CS_SEV		(2UL << CMDQ_SYNC_0_CS_SHIFT)
+
+/* Event queue */
+#define EVTQ_ENT_DWORDS			4
+#define EVTQ_MAX_SZ_SHIFT		7
+
+#define EVTQ_0_ID_SHIFT			0
+#define EVTQ_0_ID_MASK			0xffUL
+
+/* PRI queue */
+#define PRIQ_ENT_DWORDS			2
+#define PRIQ_MAX_SZ_SHIFT		8
+
+#define PRIQ_0_SID_SHIFT		0
+#define PRIQ_0_SID_MASK			0xffffffffUL
+#define PRIQ_0_SSID_SHIFT		32
+#define PRIQ_0_SSID_MASK		0xfffffUL
+#define PRIQ_0_PERM_PRIV		(1UL << 58)
+#define PRIQ_0_PERM_EXEC		(1UL << 59)
+#define PRIQ_0_PERM_READ		(1UL << 60)
+#define PRIQ_0_PERM_WRITE		(1UL << 61)
+#define PRIQ_0_PRG_LAST			(1UL << 62)
+#define PRIQ_0_SSID_V			(1UL << 63)
+
+#define PRIQ_1_PRG_IDX_SHIFT		0
+#define PRIQ_1_PRG_IDX_MASK		0x1ffUL
+#define PRIQ_1_ADDR_SHIFT		12
+#define PRIQ_1_ADDR_MASK		0xfffffffffffffUL
+
+/* High-level queue structures */
+#define ARM_SMMU_POLL_TIMEOUT_US	100
+#define ARM_SMMU_CMDQ_DRAIN_TIMEOUT_US	1000000 /* 1s! */
+
+#define MSI_IOVA_BASE			0x8000000
+#define MSI_IOVA_LENGTH			0x100000
+
+/* Until ACPICA headers cover IORT rev. C */
+#ifndef ACPI_IORT_SMMU_HISILICON_HI161X
+#define ACPI_IORT_SMMU_HISILICON_HI161X		0x1
+#endif
+
+#ifndef ACPI_IORT_SMMU_V3_CAVIUM_CN99XX
+#define ACPI_IORT_SMMU_V3_CAVIUM_CN99XX		0x2
+#endif
+
+static bool disable_bypass;
+module_param_named(disable_bypass, disable_bypass, bool, S_IRUGO);
+MODULE_PARM_DESC(disable_bypass,
+	"Disable bypass streams such that incoming transactions from devices that are not attached to an iommu domain will report an abort back to the device and will not be allowed to pass through the SMMU.");
+
+enum pri_resp {
+	PRI_RESP_DENY,
+	PRI_RESP_FAIL,
+	PRI_RESP_SUCC,
+};
+
+enum arm_smmu_msi_index {
+	EVTQ_MSI_INDEX,
+	GERROR_MSI_INDEX,
+	PRIQ_MSI_INDEX,
+	ARM_SMMU_MAX_MSIS,
+};
+
+static phys_addr_t arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
+	[EVTQ_MSI_INDEX] = {
+		ARM_SMMU_EVTQ_IRQ_CFG0,
+		ARM_SMMU_EVTQ_IRQ_CFG1,
+		ARM_SMMU_EVTQ_IRQ_CFG2,
+	},
+	[GERROR_MSI_INDEX] = {
+		ARM_SMMU_GERROR_IRQ_CFG0,
+		ARM_SMMU_GERROR_IRQ_CFG1,
+		ARM_SMMU_GERROR_IRQ_CFG2,
+	},
+	[PRIQ_MSI_INDEX] = {
+		ARM_SMMU_PRIQ_IRQ_CFG0,
+		ARM_SMMU_PRIQ_IRQ_CFG1,
+		ARM_SMMU_PRIQ_IRQ_CFG2,
+	},
+};
+
+struct arm_smmu_cmdq_ent {
+	/* Common fields */
+	u8				opcode;
+	bool				substream_valid;
+
+	/* Command-specific fields */
+	union {
+		#define CMDQ_OP_PREFETCH_CFG	0x1
+		struct {
+			u32			sid;
+			u8			size;
+			u64			addr;
+		} prefetch;
+
+		#define CMDQ_OP_CFGI_STE	0x3
+		#define CMDQ_OP_CFGI_ALL	0x4
+		struct {
+			u32			sid;
+			union {
+				bool		leaf;
+				u8		span;
+			};
+		} cfgi;
+
+		#define CMDQ_OP_TLBI_NH_ASID	0x11
+		#define CMDQ_OP_TLBI_NH_VA	0x12
+		#define CMDQ_OP_TLBI_EL2_ALL	0x20
+		#define CMDQ_OP_TLBI_S12_VMALL	0x28
+		#define CMDQ_OP_TLBI_S2_IPA	0x2a
+		#define CMDQ_OP_TLBI_NSNH_ALL	0x30
+		struct {
+			u16			asid;
+			u16			vmid;
+			bool			leaf;
+			u64			addr;
+		} tlbi;
+
+		#define CMDQ_OP_PRI_RESP	0x41
+		struct {
+			u32			sid;
+			u32			ssid;
+			u16			grpid;
+			enum pri_resp		resp;
+		} pri;
+
+		#define CMDQ_OP_CMD_SYNC	0x46
+	};
+};
+
+struct arm_smmu_queue {
+	int				irq; /* Wired interrupt */
+
+	__le64				*base;
+	dma_addr_t			base_dma;
+	u64				q_base;
+
+	size_t				ent_dwords;
+	u32				max_n_shift;
+	u32				prod;
+	u32				cons;
+
+	u32 __iomem			*prod_reg;
+	u32 __iomem			*cons_reg;
+};
+
+struct arm_smmu_cmdq {
+	struct arm_smmu_queue		q;
+	spinlock_t			lock;
+};
+
+struct arm_smmu_evtq {
+	struct arm_smmu_queue		q;
+	u32				max_stalls;
+};
+
+struct arm_smmu_priq {
+	struct arm_smmu_queue		q;
+};
+
+/* High-level stream table and context descriptor structures */
+struct arm_smmu_strtab_l1_desc {
+	u8				span;
+
+	__le64				*l2ptr;
+	dma_addr_t			l2ptr_dma;
+};
+
+struct arm_smmu_s1_cfg {
+	__le64				*cdptr;
+	dma_addr_t			cdptr_dma;
+
+	struct arm_smmu_ctx_desc {
+		u16	asid;
+		u64	ttbr;
+		u64	tcr;
+		u64	mair;
+	}				cd;
+};
+
+struct arm_smmu_s2_cfg {
+	u16				vmid;
+	u64				vttbr;
+	u64				vtcr;
+};
+
+struct arm_smmu_strtab_ent {
+	/*
+	 * An STE is "assigned" if the master emitting the corresponding SID
+	 * is attached to a domain. The behaviour of an unassigned STE is
+	 * determined by the disable_bypass parameter, whereas an assigned
+	 * STE behaves according to s1_cfg/s2_cfg, which themselves are
+	 * configured according to the domain type.
+	 */
+	bool				assigned;
+	struct arm_smmu_s1_cfg		*s1_cfg;
+	struct arm_smmu_s2_cfg		*s2_cfg;
+};
+
+struct arm_smmu_strtab_cfg {
+	__le64				*strtab;
+	dma_addr_t			strtab_dma;
+	struct arm_smmu_strtab_l1_desc	*l1_desc;
+	unsigned int			num_l1_ents;
+
+	u64				strtab_base;
+	u32				strtab_base_cfg;
+};
+
+/* An SMMUv3 instance */
+struct arm_smmu_device {
+	struct device			*dev;
+	void __iomem			*base;
+
+#define ARM_SMMU_FEAT_2_LVL_STRTAB	(1 << 0)
+#define ARM_SMMU_FEAT_2_LVL_CDTAB	(1 << 1)
+#define ARM_SMMU_FEAT_TT_LE		(1 << 2)
+#define ARM_SMMU_FEAT_TT_BE		(1 << 3)
+#define ARM_SMMU_FEAT_PRI		(1 << 4)
+#define ARM_SMMU_FEAT_ATS		(1 << 5)
+#define ARM_SMMU_FEAT_SEV		(1 << 6)
+#define ARM_SMMU_FEAT_MSI		(1 << 7)
+#define ARM_SMMU_FEAT_COHERENCY		(1 << 8)
+#define ARM_SMMU_FEAT_TRANS_S1		(1 << 9)
+#define ARM_SMMU_FEAT_TRANS_S2		(1 << 10)
+#define ARM_SMMU_FEAT_STALLS		(1 << 11)
+#define ARM_SMMU_FEAT_HYP		(1 << 12)
+	u32				features;
+
+#define ARM_SMMU_OPT_SKIP_PREFETCH	(1 << 0)
+#define ARM_SMMU_OPT_PAGE0_REGS_ONLY	(1 << 1)
+	u32				options;
+
+	struct arm_smmu_cmdq		cmdq;
+	struct arm_smmu_evtq		evtq;
+	struct arm_smmu_priq		priq;
+
+	int				gerr_irq;
+	int				combined_irq;
+
+	unsigned long			ias; /* IPA */
+	unsigned long			oas; /* PA */
+	unsigned long			pgsize_bitmap;
+
+#define ARM_SMMU_MAX_ASIDS		(1 << 16)
+	unsigned int			asid_bits;
+	DECLARE_BITMAP(asid_map, ARM_SMMU_MAX_ASIDS);
+
+#define ARM_SMMU_MAX_VMIDS		(1 << 16)
+	unsigned int			vmid_bits;
+	DECLARE_BITMAP(vmid_map, ARM_SMMU_MAX_VMIDS);
+
+	unsigned int			ssid_bits;
+	unsigned int			sid_bits;
+
+	struct arm_smmu_strtab_cfg	strtab_cfg;
+
+	/* IOMMU core code handle */
+	struct iommu_device		iommu;
+};
+
+/* SMMU private data for each master */
+struct arm_smmu_master_data {
+	struct arm_smmu_device		*smmu;
+	struct arm_smmu_strtab_ent	ste;
+};
+
+/* SMMU private data for an IOMMU domain */
+enum arm_smmu_domain_stage {
+	ARM_SMMU_DOMAIN_S1 = 0,
+	ARM_SMMU_DOMAIN_S2,
+	ARM_SMMU_DOMAIN_NESTED,
+	ARM_SMMU_DOMAIN_BYPASS,
+};
+
+struct arm_smmu_domain {
+	struct arm_smmu_device		*smmu;
+	struct mutex			init_mutex; /* Protects smmu pointer */
+
+	struct io_pgtable_ops		*pgtbl_ops;
+
+	enum arm_smmu_domain_stage	stage;
+	union {
+		struct arm_smmu_s1_cfg	s1_cfg;
+		struct arm_smmu_s2_cfg	s2_cfg;
+	};
+
+	struct iommu_domain		domain;
+};
+
+struct arm_smmu_option_prop {
+	u32 opt;
+	const char *prop;
+};
+
+static struct arm_smmu_option_prop arm_smmu_options[] = {
+	{ ARM_SMMU_OPT_SKIP_PREFETCH, "hisilicon,broken-prefetch-cmd" },
+	{ ARM_SMMU_OPT_PAGE0_REGS_ONLY, "cavium,cn9900-broken-page1-regspace"},
+	{ 0, NULL},
+};
+
+static inline void __iomem *arm_smmu_page1_fixup(unsigned long offset,
+						 struct arm_smmu_device *smmu)
+{
+	if ((offset > SZ_64K) &&
+	    (smmu->options & ARM_SMMU_OPT_PAGE0_REGS_ONLY))
+		offset -= SZ_64K;
+
+	return smmu->base + offset;
+}
+
+static struct arm_smmu_domain *to_smmu_domain(struct iommu_domain *dom)
+{
+	return container_of(dom, struct arm_smmu_domain, domain);
+}
+
+static void parse_driver_options(struct arm_smmu_device *smmu)
+{
+	int i = 0;
+
+	do {
+		if (of_property_read_bool(smmu->dev->of_node,
+						arm_smmu_options[i].prop)) {
+			smmu->options |= arm_smmu_options[i].opt;
+			dev_notice(smmu->dev, "option %s\n",
+				arm_smmu_options[i].prop);
+		}
+	} while (arm_smmu_options[++i].opt);
+}
+
+/* Low-level queue manipulation functions */
+static bool queue_full(struct arm_smmu_queue *q)
+{
+	return Q_IDX(q, q->prod) == Q_IDX(q, q->cons) &&
+	       Q_WRP(q, q->prod) != Q_WRP(q, q->cons);
+}
+
+static bool queue_empty(struct arm_smmu_queue *q)
+{
+	return Q_IDX(q, q->prod) == Q_IDX(q, q->cons) &&
+	       Q_WRP(q, q->prod) == Q_WRP(q, q->cons);
+}
+
+static void queue_sync_cons(struct arm_smmu_queue *q)
+{
+	q->cons = readl_relaxed(q->cons_reg);
+}
+
+static void queue_inc_cons(struct arm_smmu_queue *q)
+{
+	u32 cons = (Q_WRP(q, q->cons) | Q_IDX(q, q->cons)) + 1;
+
+	q->cons = Q_OVF(q, q->cons) | Q_WRP(q, cons) | Q_IDX(q, cons);
+	writel(q->cons, q->cons_reg);
+}
+
+static int queue_sync_prod(struct arm_smmu_queue *q)
+{
+	int ret = 0;
+	u32 prod = readl_relaxed(q->prod_reg);
+
+	if (Q_OVF(q, prod) != Q_OVF(q, q->prod))
+		ret = -EOVERFLOW;
+
+	q->prod = prod;
+	return ret;
+}
+
+static void queue_inc_prod(struct arm_smmu_queue *q)
+{
+	u32 prod = (Q_WRP(q, q->prod) | Q_IDX(q, q->prod)) + 1;
+
+	q->prod = Q_OVF(q, q->prod) | Q_WRP(q, prod) | Q_IDX(q, prod);
+	writel(q->prod, q->prod_reg);
+}
+
+/*
+ * Wait for the SMMU to consume items. If drain is true, wait until the queue
+ * is empty. Otherwise, wait until there is at least one free slot.
+ */
+static int queue_poll_cons(struct arm_smmu_queue *q, bool drain, bool wfe)
+{
+	ktime_t timeout;
+	unsigned int delay = 1;
+
+	/* Wait longer if it's queue drain */
+	timeout = ktime_add_us(ktime_get(), drain ?
+					    ARM_SMMU_CMDQ_DRAIN_TIMEOUT_US :
+					    ARM_SMMU_POLL_TIMEOUT_US);
+
+	while (queue_sync_cons(q), (drain ? !queue_empty(q) : queue_full(q))) {
+		if (ktime_compare(ktime_get(), timeout) > 0)
+			return -ETIMEDOUT;
+
+		if (wfe) {
+			wfe();
+		} else {
+			cpu_relax();
+			udelay(delay);
+			delay *= 2;
+		}
+	}
+
+	return 0;
+}
+
+static void queue_write(__le64 *dst, u64 *src, size_t n_dwords)
+{
+	int i;
+
+	for (i = 0; i < n_dwords; ++i)
+		*dst++ = cpu_to_le64(*src++);
+}
+
+static int queue_insert_raw(struct arm_smmu_queue *q, u64 *ent)
+{
+	if (queue_full(q))
+		return -ENOSPC;
+
+	queue_write(Q_ENT(q, q->prod), ent, q->ent_dwords);
+	queue_inc_prod(q);
+	return 0;
+}
+
+static void queue_read(__le64 *dst, u64 *src, size_t n_dwords)
+{
+	int i;
+
+	for (i = 0; i < n_dwords; ++i)
+		*dst++ = le64_to_cpu(*src++);
+}
+
+static int queue_remove_raw(struct arm_smmu_queue *q, u64 *ent)
+{
+	if (queue_empty(q))
+		return -EAGAIN;
+
+	queue_read(ent, Q_ENT(q, q->cons), q->ent_dwords);
+	queue_inc_cons(q);
+	return 0;
+}
+
+/* High-level queue accessors */
+static int arm_smmu_cmdq_build_cmd(u64 *cmd, struct arm_smmu_cmdq_ent *ent)
+{
+	memset(cmd, 0, CMDQ_ENT_DWORDS << 3);
+	cmd[0] |= (ent->opcode & CMDQ_0_OP_MASK) << CMDQ_0_OP_SHIFT;
+
+	switch (ent->opcode) {
+	case CMDQ_OP_TLBI_EL2_ALL:
+	case CMDQ_OP_TLBI_NSNH_ALL:
+		break;
+	case CMDQ_OP_PREFETCH_CFG:
+		cmd[0] |= (u64)ent->prefetch.sid << CMDQ_PREFETCH_0_SID_SHIFT;
+		cmd[1] |= ent->prefetch.size << CMDQ_PREFETCH_1_SIZE_SHIFT;
+		cmd[1] |= ent->prefetch.addr & CMDQ_PREFETCH_1_ADDR_MASK;
+		break;
+	case CMDQ_OP_CFGI_STE:
+		cmd[0] |= (u64)ent->cfgi.sid << CMDQ_CFGI_0_SID_SHIFT;
+		cmd[1] |= ent->cfgi.leaf ? CMDQ_CFGI_1_LEAF : 0;
+		break;
+	case CMDQ_OP_CFGI_ALL:
+		/* Cover the entire SID range */
+		cmd[1] |= CMDQ_CFGI_1_RANGE_MASK << CMDQ_CFGI_1_RANGE_SHIFT;
+		break;
+	case CMDQ_OP_TLBI_NH_VA:
+		cmd[0] |= (u64)ent->tlbi.asid << CMDQ_TLBI_0_ASID_SHIFT;
+		cmd[1] |= ent->tlbi.leaf ? CMDQ_TLBI_1_LEAF : 0;
+		cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_VA_MASK;
+		break;
+	case CMDQ_OP_TLBI_S2_IPA:
+		cmd[0] |= (u64)ent->tlbi.vmid << CMDQ_TLBI_0_VMID_SHIFT;
+		cmd[1] |= ent->tlbi.leaf ? CMDQ_TLBI_1_LEAF : 0;
+		cmd[1] |= ent->tlbi.addr & CMDQ_TLBI_1_IPA_MASK;
+		break;
+	case CMDQ_OP_TLBI_NH_ASID:
+		cmd[0] |= (u64)ent->tlbi.asid << CMDQ_TLBI_0_ASID_SHIFT;
+		/* Fallthrough */
+	case CMDQ_OP_TLBI_S12_VMALL:
+		cmd[0] |= (u64)ent->tlbi.vmid << CMDQ_TLBI_0_VMID_SHIFT;
+		break;
+	case CMDQ_OP_PRI_RESP:
+		cmd[0] |= ent->substream_valid ? CMDQ_0_SSV : 0;
+		cmd[0] |= ent->pri.ssid << CMDQ_PRI_0_SSID_SHIFT;
+		cmd[0] |= (u64)ent->pri.sid << CMDQ_PRI_0_SID_SHIFT;
+		cmd[1] |= ent->pri.grpid << CMDQ_PRI_1_GRPID_SHIFT;
+		switch (ent->pri.resp) {
+		case PRI_RESP_DENY:
+			cmd[1] |= CMDQ_PRI_1_RESP_DENY;
+			break;
+		case PRI_RESP_FAIL:
+			cmd[1] |= CMDQ_PRI_1_RESP_FAIL;
+			break;
+		case PRI_RESP_SUCC:
+			cmd[1] |= CMDQ_PRI_1_RESP_SUCC;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case CMDQ_OP_CMD_SYNC:
+		cmd[0] |= CMDQ_SYNC_0_CS_SEV;
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+static void arm_smmu_cmdq_skip_err(struct arm_smmu_device *smmu)
+{
+	static const char *cerror_str[] = {
+		[CMDQ_ERR_CERROR_NONE_IDX]	= "No error",
+		[CMDQ_ERR_CERROR_ILL_IDX]	= "Illegal command",
+		[CMDQ_ERR_CERROR_ABT_IDX]	= "Abort on command fetch",
+	};
+
+	int i;
+	u64 cmd[CMDQ_ENT_DWORDS];
+	struct arm_smmu_queue *q = &smmu->cmdq.q;
+	u32 cons = readl_relaxed(q->cons_reg);
+	u32 idx = cons >> CMDQ_ERR_SHIFT & CMDQ_ERR_MASK;
+	struct arm_smmu_cmdq_ent cmd_sync = {
+		.opcode = CMDQ_OP_CMD_SYNC,
+	};
+
+	dev_err(smmu->dev, "CMDQ error (cons 0x%08x): %s\n", cons,
+		idx < ARRAY_SIZE(cerror_str) ?  cerror_str[idx] : "Unknown");
+
+	switch (idx) {
+	case CMDQ_ERR_CERROR_ABT_IDX:
+		dev_err(smmu->dev, "retrying command fetch\n");
+	case CMDQ_ERR_CERROR_NONE_IDX:
+		return;
+	case CMDQ_ERR_CERROR_ILL_IDX:
+		/* Fallthrough */
+	default:
+		break;
+	}
+
+	/*
+	 * We may have concurrent producers, so we need to be careful
+	 * not to touch any of the shadow cmdq state.
+	 */
+	queue_read(cmd, Q_ENT(q, cons), q->ent_dwords);
+	dev_err(smmu->dev, "skipping command in error state:\n");
+	for (i = 0; i < ARRAY_SIZE(cmd); ++i)
+		dev_err(smmu->dev, "\t0x%016llx\n", (unsigned long long)cmd[i]);
+
+	/* Convert the erroneous command into a CMD_SYNC */
+	if (arm_smmu_cmdq_build_cmd(cmd, &cmd_sync)) {
+		dev_err(smmu->dev, "failed to convert to CMD_SYNC\n");
+		return;
+	}
+
+	queue_write(Q_ENT(q, cons), cmd, q->ent_dwords);
+}
+
+static void arm_smmu_cmdq_issue_cmd(struct arm_smmu_device *smmu,
+				    struct arm_smmu_cmdq_ent *ent)
+{
+	u64 cmd[CMDQ_ENT_DWORDS];
+	unsigned long flags;
+	bool wfe = !!(smmu->features & ARM_SMMU_FEAT_SEV);
+	struct arm_smmu_queue *q = &smmu->cmdq.q;
+
+	if (arm_smmu_cmdq_build_cmd(cmd, ent)) {
+		dev_warn(smmu->dev, "ignoring unknown CMDQ opcode 0x%x\n",
+			 ent->opcode);
+		return;
+	}
+
+	spin_lock_irqsave(&smmu->cmdq.lock, flags);
+	while (queue_insert_raw(q, cmd) == -ENOSPC) {
+		if (queue_poll_cons(q, false, wfe))
+			dev_err_ratelimited(smmu->dev, "CMDQ timeout\n");
+	}
+
+	if (ent->opcode == CMDQ_OP_CMD_SYNC && queue_poll_cons(q, true, wfe))
+		dev_err_ratelimited(smmu->dev, "CMD_SYNC timeout\n");
+	spin_unlock_irqrestore(&smmu->cmdq.lock, flags);
+}
+
+/* Context descriptor manipulation functions */
+static u64 arm_smmu_cpu_tcr_to_cd(u64 tcr)
+{
+	u64 val = 0;
+
+	/* Repack the TCR. Just care about TTBR0 for now */
+	val |= ARM_SMMU_TCR2CD(tcr, T0SZ);
+	val |= ARM_SMMU_TCR2CD(tcr, TG0);
+	val |= ARM_SMMU_TCR2CD(tcr, IRGN0);
+	val |= ARM_SMMU_TCR2CD(tcr, ORGN0);
+	val |= ARM_SMMU_TCR2CD(tcr, SH0);
+	val |= ARM_SMMU_TCR2CD(tcr, EPD0);
+	val |= ARM_SMMU_TCR2CD(tcr, EPD1);
+	val |= ARM_SMMU_TCR2CD(tcr, IPS);
+	val |= ARM_SMMU_TCR2CD(tcr, TBI0);
+
+	return val;
+}
+
+static void arm_smmu_write_ctx_desc(struct arm_smmu_device *smmu,
+				    struct arm_smmu_s1_cfg *cfg)
+{
+	u64 val;
+
+	/*
+	 * We don't need to issue any invalidation here, as we'll invalidate
+	 * the STE when installing the new entry anyway.
+	 */
+	val = arm_smmu_cpu_tcr_to_cd(cfg->cd.tcr) |
+#ifdef __BIG_ENDIAN
+	      CTXDESC_CD_0_ENDI |
+#endif
+	      CTXDESC_CD_0_R | CTXDESC_CD_0_A | CTXDESC_CD_0_ASET_PRIVATE |
+	      CTXDESC_CD_0_AA64 | (u64)cfg->cd.asid << CTXDESC_CD_0_ASID_SHIFT |
+	      CTXDESC_CD_0_V;
+	cfg->cdptr[0] = cpu_to_le64(val);
+
+	val = cfg->cd.ttbr & CTXDESC_CD_1_TTB0_MASK << CTXDESC_CD_1_TTB0_SHIFT;
+	cfg->cdptr[1] = cpu_to_le64(val);
+
+	cfg->cdptr[3] = cpu_to_le64(cfg->cd.mair << CTXDESC_CD_3_MAIR_SHIFT);
+}
+
+/* Stream table manipulation functions */
+static void
+arm_smmu_write_strtab_l1_desc(__le64 *dst, struct arm_smmu_strtab_l1_desc *desc)
+{
+	u64 val = 0;
+
+	val |= (desc->span & STRTAB_L1_DESC_SPAN_MASK)
+		<< STRTAB_L1_DESC_SPAN_SHIFT;
+	val |= desc->l2ptr_dma &
+	       STRTAB_L1_DESC_L2PTR_MASK << STRTAB_L1_DESC_L2PTR_SHIFT;
+
+	*dst = cpu_to_le64(val);
+}
+
+static void arm_smmu_sync_ste_for_sid(struct arm_smmu_device *smmu, u32 sid)
+{
+	struct arm_smmu_cmdq_ent cmd = {
+		.opcode	= CMDQ_OP_CFGI_STE,
+		.cfgi	= {
+			.sid	= sid,
+			.leaf	= true,
+		},
+	};
+
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+	cmd.opcode = CMDQ_OP_CMD_SYNC;
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+}
+
+static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid,
+				      __le64 *dst, struct arm_smmu_strtab_ent *ste)
+{
+	/*
+	 * This is hideously complicated, but we only really care about
+	 * three cases at the moment:
+	 *
+	 * 1. Invalid (all zero) -> bypass/fault (init)
+	 * 2. Bypass/fault -> translation/bypass (attach)
+	 * 3. Translation/bypass -> bypass/fault (detach)
+	 *
+	 * Given that we can't update the STE atomically and the SMMU
+	 * doesn't read the thing in a defined order, that leaves us
+	 * with the following maintenance requirements:
+	 *
+	 * 1. Update Config, return (init time STEs aren't live)
+	 * 2. Write everything apart from dword 0, sync, write dword 0, sync
+	 * 3. Update Config, sync
+	 */
+	u64 val = le64_to_cpu(dst[0]);
+	bool ste_live = false;
+	struct arm_smmu_cmdq_ent prefetch_cmd = {
+		.opcode		= CMDQ_OP_PREFETCH_CFG,
+		.prefetch	= {
+			.sid	= sid,
+		},
+	};
+
+	if (val & STRTAB_STE_0_V) {
+		u64 cfg;
+
+		cfg = val & STRTAB_STE_0_CFG_MASK << STRTAB_STE_0_CFG_SHIFT;
+		switch (cfg) {
+		case STRTAB_STE_0_CFG_BYPASS:
+			break;
+		case STRTAB_STE_0_CFG_S1_TRANS:
+		case STRTAB_STE_0_CFG_S2_TRANS:
+			ste_live = true;
+			break;
+		case STRTAB_STE_0_CFG_ABORT:
+			if (disable_bypass)
+				break;
+		default:
+			BUG(); /* STE corruption */
+		}
+	}
+
+	/* Nuke the existing STE_0 value, as we're going to rewrite it */
+	val = STRTAB_STE_0_V;
+
+	/* Bypass/fault */
+	if (!ste->assigned || !(ste->s1_cfg || ste->s2_cfg)) {
+		if (!ste->assigned && disable_bypass)
+			val |= STRTAB_STE_0_CFG_ABORT;
+		else
+			val |= STRTAB_STE_0_CFG_BYPASS;
+
+		dst[0] = cpu_to_le64(val);
+		dst[1] = cpu_to_le64(STRTAB_STE_1_SHCFG_INCOMING
+			 << STRTAB_STE_1_SHCFG_SHIFT);
+		dst[2] = 0; /* Nuke the VMID */
+		if (ste_live)
+			arm_smmu_sync_ste_for_sid(smmu, sid);
+		return;
+	}
+
+	if (ste->s1_cfg) {
+		BUG_ON(ste_live);
+		dst[1] = cpu_to_le64(
+			 STRTAB_STE_1_S1C_CACHE_WBRA
+			 << STRTAB_STE_1_S1CIR_SHIFT |
+			 STRTAB_STE_1_S1C_CACHE_WBRA
+			 << STRTAB_STE_1_S1COR_SHIFT |
+			 STRTAB_STE_1_S1C_SH_ISH << STRTAB_STE_1_S1CSH_SHIFT |
+#ifdef CONFIG_PCI_ATS
+			 STRTAB_STE_1_EATS_TRANS << STRTAB_STE_1_EATS_SHIFT |
+#endif
+			 STRTAB_STE_1_STRW_NSEL1 << STRTAB_STE_1_STRW_SHIFT);
+
+		if (smmu->features & ARM_SMMU_FEAT_STALLS)
+			dst[1] |= cpu_to_le64(STRTAB_STE_1_S1STALLD);
+
+		val |= (ste->s1_cfg->cdptr_dma & STRTAB_STE_0_S1CTXPTR_MASK
+		        << STRTAB_STE_0_S1CTXPTR_SHIFT) |
+			STRTAB_STE_0_CFG_S1_TRANS;
+	}
+
+	if (ste->s2_cfg) {
+		BUG_ON(ste_live);
+		dst[2] = cpu_to_le64(
+			 ste->s2_cfg->vmid << STRTAB_STE_2_S2VMID_SHIFT |
+			 (ste->s2_cfg->vtcr & STRTAB_STE_2_VTCR_MASK)
+			  << STRTAB_STE_2_VTCR_SHIFT |
+#ifdef __BIG_ENDIAN
+			 STRTAB_STE_2_S2ENDI |
+#endif
+			 STRTAB_STE_2_S2PTW | STRTAB_STE_2_S2AA64 |
+			 STRTAB_STE_2_S2R);
+
+		dst[3] = cpu_to_le64(ste->s2_cfg->vttbr &
+			 STRTAB_STE_3_S2TTB_MASK << STRTAB_STE_3_S2TTB_SHIFT);
+
+		val |= STRTAB_STE_0_CFG_S2_TRANS;
+	}
+
+	arm_smmu_sync_ste_for_sid(smmu, sid);
+	dst[0] = cpu_to_le64(val);
+	arm_smmu_sync_ste_for_sid(smmu, sid);
+
+	/* It's likely that we'll want to use the new STE soon */
+	if (!(smmu->options & ARM_SMMU_OPT_SKIP_PREFETCH))
+		arm_smmu_cmdq_issue_cmd(smmu, &prefetch_cmd);
+}
+
+static void arm_smmu_init_bypass_stes(u64 *strtab, unsigned int nent)
+{
+	unsigned int i;
+	struct arm_smmu_strtab_ent ste = { .assigned = false };
+
+	for (i = 0; i < nent; ++i) {
+		arm_smmu_write_strtab_ent(NULL, -1, strtab, &ste);
+		strtab += STRTAB_STE_DWORDS;
+	}
+}
+
+static int arm_smmu_init_l2_strtab(struct arm_smmu_device *smmu, u32 sid)
+{
+	size_t size;
+	void *strtab;
+	struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
+	struct arm_smmu_strtab_l1_desc *desc = &cfg->l1_desc[sid >> STRTAB_SPLIT];
+
+	if (desc->l2ptr)
+		return 0;
+
+	size = 1 << (STRTAB_SPLIT + ilog2(STRTAB_STE_DWORDS) + 3);
+	strtab = &cfg->strtab[(sid >> STRTAB_SPLIT) * STRTAB_L1_DESC_DWORDS];
+
+	desc->span = STRTAB_SPLIT + 1;
+	desc->l2ptr = dmam_alloc_coherent(smmu->dev, size, &desc->l2ptr_dma,
+					  GFP_KERNEL | __GFP_ZERO);
+	if (!desc->l2ptr) {
+		dev_err(smmu->dev,
+			"failed to allocate l2 stream table for SID %u\n",
+			sid);
+		return -ENOMEM;
+	}
+
+	arm_smmu_init_bypass_stes(desc->l2ptr, 1 << STRTAB_SPLIT);
+	arm_smmu_write_strtab_l1_desc(strtab, desc);
+	return 0;
+}
+
+/* IRQ and event handlers */
+static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev)
+{
+	int i;
+	struct arm_smmu_device *smmu = dev;
+	struct arm_smmu_queue *q = &smmu->evtq.q;
+	u64 evt[EVTQ_ENT_DWORDS];
+
+	do {
+		while (!queue_remove_raw(q, evt)) {
+			u8 id = evt[0] >> EVTQ_0_ID_SHIFT & EVTQ_0_ID_MASK;
+
+			dev_info(smmu->dev, "event 0x%02x received:\n", id);
+			for (i = 0; i < ARRAY_SIZE(evt); ++i)
+				dev_info(smmu->dev, "\t0x%016llx\n",
+					 (unsigned long long)evt[i]);
+
+		}
+
+		/*
+		 * Not much we can do on overflow, so scream and pretend we're
+		 * trying harder.
+		 */
+		if (queue_sync_prod(q) == -EOVERFLOW)
+			dev_err(smmu->dev, "EVTQ overflow detected -- events lost\n");
+	} while (!queue_empty(q));
+
+	/* Sync our overflow flag, as we believe we're up to speed */
+	q->cons = Q_OVF(q, q->prod) | Q_WRP(q, q->cons) | Q_IDX(q, q->cons);
+	return IRQ_HANDLED;
+}
+
+static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
+{
+	u32 sid, ssid;
+	u16 grpid;
+	bool ssv, last;
+
+	sid = evt[0] >> PRIQ_0_SID_SHIFT & PRIQ_0_SID_MASK;
+	ssv = evt[0] & PRIQ_0_SSID_V;
+	ssid = ssv ? evt[0] >> PRIQ_0_SSID_SHIFT & PRIQ_0_SSID_MASK : 0;
+	last = evt[0] & PRIQ_0_PRG_LAST;
+	grpid = evt[1] >> PRIQ_1_PRG_IDX_SHIFT & PRIQ_1_PRG_IDX_MASK;
+
+	dev_info(smmu->dev, "unexpected PRI request received:\n");
+	dev_info(smmu->dev,
+		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova 0x%016llx\n",
+		 sid, ssid, grpid, last ? "L" : "",
+		 evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
+		 evt[0] & PRIQ_0_PERM_READ ? "R" : "",
+		 evt[0] & PRIQ_0_PERM_WRITE ? "W" : "",
+		 evt[0] & PRIQ_0_PERM_EXEC ? "X" : "",
+		 evt[1] & PRIQ_1_ADDR_MASK << PRIQ_1_ADDR_SHIFT);
+
+	if (last) {
+		struct arm_smmu_cmdq_ent cmd = {
+			.opcode			= CMDQ_OP_PRI_RESP,
+			.substream_valid	= ssv,
+			.pri			= {
+				.sid	= sid,
+				.ssid	= ssid,
+				.grpid	= grpid,
+				.resp	= PRI_RESP_DENY,
+			},
+		};
+
+		arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+	}
+}
+
+static irqreturn_t arm_smmu_priq_thread(int irq, void *dev)
+{
+	struct arm_smmu_device *smmu = dev;
+	struct arm_smmu_queue *q = &smmu->priq.q;
+	u64 evt[PRIQ_ENT_DWORDS];
+
+	do {
+		while (!queue_remove_raw(q, evt))
+			arm_smmu_handle_ppr(smmu, evt);
+
+		if (queue_sync_prod(q) == -EOVERFLOW)
+			dev_err(smmu->dev, "PRIQ overflow detected -- requests lost\n");
+	} while (!queue_empty(q));
+
+	/* Sync our overflow flag, as we believe we're up to speed */
+	q->cons = Q_OVF(q, q->prod) | Q_WRP(q, q->cons) | Q_IDX(q, q->cons);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t arm_smmu_cmdq_sync_handler(int irq, void *dev)
+{
+	/* We don't actually use CMD_SYNC interrupts for anything */
+	return IRQ_HANDLED;
+}
+
+static int arm_smmu_device_disable(struct arm_smmu_device *smmu);
+
+static irqreturn_t arm_smmu_gerror_handler(int irq, void *dev)
+{
+	u32 gerror, gerrorn, active;
+	struct arm_smmu_device *smmu = dev;
+
+	gerror = readl_relaxed(smmu->base + ARM_SMMU_GERROR);
+	gerrorn = readl_relaxed(smmu->base + ARM_SMMU_GERRORN);
+
+	active = gerror ^ gerrorn;
+	if (!(active & GERROR_ERR_MASK))
+		return IRQ_NONE; /* No errors pending */
+
+	dev_warn(smmu->dev,
+		 "unexpected global error reported (0x%08x), this could be serious\n",
+		 active);
+
+	if (active & GERROR_SFM_ERR) {
+		dev_err(smmu->dev, "device has entered Service Failure Mode!\n");
+		arm_smmu_device_disable(smmu);
+	}
+
+	if (active & GERROR_MSI_GERROR_ABT_ERR)
+		dev_warn(smmu->dev, "GERROR MSI write aborted\n");
+
+	if (active & GERROR_MSI_PRIQ_ABT_ERR)
+		dev_warn(smmu->dev, "PRIQ MSI write aborted\n");
+
+	if (active & GERROR_MSI_EVTQ_ABT_ERR)
+		dev_warn(smmu->dev, "EVTQ MSI write aborted\n");
+
+	if (active & GERROR_MSI_CMDQ_ABT_ERR) {
+		dev_warn(smmu->dev, "CMDQ MSI write aborted\n");
+		arm_smmu_cmdq_sync_handler(irq, smmu->dev);
+	}
+
+	if (active & GERROR_PRIQ_ABT_ERR)
+		dev_err(smmu->dev, "PRIQ write aborted -- events may have been lost\n");
+
+	if (active & GERROR_EVTQ_ABT_ERR)
+		dev_err(smmu->dev, "EVTQ write aborted -- events may have been lost\n");
+
+	if (active & GERROR_CMDQ_ERR)
+		arm_smmu_cmdq_skip_err(smmu);
+
+	writel(gerror, smmu->base + ARM_SMMU_GERRORN);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t arm_smmu_combined_irq_thread(int irq, void *dev)
+{
+	struct arm_smmu_device *smmu = dev;
+
+	arm_smmu_evtq_thread(irq, dev);
+	if (smmu->features & ARM_SMMU_FEAT_PRI)
+		arm_smmu_priq_thread(irq, dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
+{
+	arm_smmu_gerror_handler(irq, dev);
+	arm_smmu_cmdq_sync_handler(irq, dev);
+	return IRQ_WAKE_THREAD;
+}
+
+/* IO_PGTABLE API */
+static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
+{
+	struct arm_smmu_cmdq_ent cmd;
+
+	cmd.opcode = CMDQ_OP_CMD_SYNC;
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+}
+
+static void arm_smmu_tlb_sync(void *cookie)
+{
+	struct arm_smmu_domain *smmu_domain = cookie;
+	__arm_smmu_tlb_sync(smmu_domain->smmu);
+}
+
+static void arm_smmu_tlb_inv_context(void *cookie)
+{
+	struct arm_smmu_domain *smmu_domain = cookie;
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	struct arm_smmu_cmdq_ent cmd;
+
+	if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
+		cmd.opcode	= CMDQ_OP_TLBI_NH_ASID;
+		cmd.tlbi.asid	= smmu_domain->s1_cfg.cd.asid;
+		cmd.tlbi.vmid	= 0;
+	} else {
+		cmd.opcode	= CMDQ_OP_TLBI_S12_VMALL;
+		cmd.tlbi.vmid	= smmu_domain->s2_cfg.vmid;
+	}
+
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+	__arm_smmu_tlb_sync(smmu);
+}
+
+static void arm_smmu_tlb_inv_range_nosync(unsigned long iova, size_t size,
+					  size_t granule, bool leaf, void *cookie)
+{
+	struct arm_smmu_domain *smmu_domain = cookie;
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	struct arm_smmu_cmdq_ent cmd = {
+		.tlbi = {
+			.leaf	= leaf,
+			.addr	= iova,
+		},
+	};
+
+	if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
+		cmd.opcode	= CMDQ_OP_TLBI_NH_VA;
+		cmd.tlbi.asid	= smmu_domain->s1_cfg.cd.asid;
+	} else {
+		cmd.opcode	= CMDQ_OP_TLBI_S2_IPA;
+		cmd.tlbi.vmid	= smmu_domain->s2_cfg.vmid;
+	}
+
+	do {
+		arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+		cmd.tlbi.addr += granule;
+	} while (size -= granule);
+}
+
+static const struct iommu_gather_ops arm_smmu_gather_ops = {
+	.tlb_flush_all	= arm_smmu_tlb_inv_context,
+	.tlb_add_flush	= arm_smmu_tlb_inv_range_nosync,
+	.tlb_sync	= arm_smmu_tlb_sync,
+};
+
+/* IOMMU API */
+static bool arm_smmu_capable(enum iommu_cap cap)
+{
+	switch (cap) {
+	case IOMMU_CAP_CACHE_COHERENCY:
+		return true;
+	case IOMMU_CAP_NOEXEC:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
+{
+	struct arm_smmu_domain *smmu_domain;
+
+	if (type != IOMMU_DOMAIN_UNMANAGED &&
+	    type != IOMMU_DOMAIN_DMA &&
+	    type != IOMMU_DOMAIN_IDENTITY)
+		return NULL;
+
+	/*
+	 * Allocate the domain and initialise some of its data structures.
+	 * We can't really do anything meaningful until we've added a
+	 * master.
+	 */
+	smmu_domain = kzalloc(sizeof(*smmu_domain), GFP_KERNEL);
+	if (!smmu_domain)
+		return NULL;
+
+	if (type == IOMMU_DOMAIN_DMA &&
+	    iommu_get_dma_cookie(&smmu_domain->domain)) {
+		kfree(smmu_domain);
+		return NULL;
+	}
+
+	mutex_init(&smmu_domain->init_mutex);
+	return &smmu_domain->domain;
+}
+
+static int arm_smmu_bitmap_alloc(unsigned long *map, int span)
+{
+	int idx, size = 1 << span;
+
+	do {
+		idx = find_first_zero_bit(map, size);
+		if (idx == size)
+			return -ENOSPC;
+	} while (test_and_set_bit(idx, map));
+
+	return idx;
+}
+
+static void arm_smmu_bitmap_free(unsigned long *map, int idx)
+{
+	clear_bit(idx, map);
+}
+
+static void arm_smmu_domain_free(struct iommu_domain *domain)
+{
+	struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+
+	iommu_put_dma_cookie(domain);
+	free_io_pgtable_ops(smmu_domain->pgtbl_ops);
+
+	/* Free the CD and ASID, if we allocated them */
+	if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
+		struct arm_smmu_s1_cfg *cfg = &smmu_domain->s1_cfg;
+
+		if (cfg->cdptr) {
+			dmam_free_coherent(smmu_domain->smmu->dev,
+					   CTXDESC_CD_DWORDS << 3,
+					   cfg->cdptr,
+					   cfg->cdptr_dma);
+
+			arm_smmu_bitmap_free(smmu->asid_map, cfg->cd.asid);
+		}
+	} else {
+		struct arm_smmu_s2_cfg *cfg = &smmu_domain->s2_cfg;
+		if (cfg->vmid)
+			arm_smmu_bitmap_free(smmu->vmid_map, cfg->vmid);
+	}
+
+	kfree(smmu_domain);
+}
+
+static int arm_smmu_domain_finalise_s1(struct arm_smmu_domain *smmu_domain,
+				       struct io_pgtable_cfg *pgtbl_cfg)
+{
+	int ret;
+	int asid;
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	struct arm_smmu_s1_cfg *cfg = &smmu_domain->s1_cfg;
+
+	asid = arm_smmu_bitmap_alloc(smmu->asid_map, smmu->asid_bits);
+	if (asid < 0)
+		return asid;
+
+	cfg->cdptr = dmam_alloc_coherent(smmu->dev, CTXDESC_CD_DWORDS << 3,
+					 &cfg->cdptr_dma,
+					 GFP_KERNEL | __GFP_ZERO);
+	if (!cfg->cdptr) {
+		dev_warn(smmu->dev, "failed to allocate context descriptor\n");
+		ret = -ENOMEM;
+		goto out_free_asid;
+	}
+
+	cfg->cd.asid	= (u16)asid;
+	cfg->cd.ttbr	= pgtbl_cfg->arm_lpae_s1_cfg.ttbr[0];
+	cfg->cd.tcr	= pgtbl_cfg->arm_lpae_s1_cfg.tcr;
+	cfg->cd.mair	= pgtbl_cfg->arm_lpae_s1_cfg.mair[0];
+	return 0;
+
+out_free_asid:
+	arm_smmu_bitmap_free(smmu->asid_map, asid);
+	return ret;
+}
+
+static int arm_smmu_domain_finalise_s2(struct arm_smmu_domain *smmu_domain,
+				       struct io_pgtable_cfg *pgtbl_cfg)
+{
+	int vmid;
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	struct arm_smmu_s2_cfg *cfg = &smmu_domain->s2_cfg;
+
+	vmid = arm_smmu_bitmap_alloc(smmu->vmid_map, smmu->vmid_bits);
+	if (vmid < 0)
+		return vmid;
+
+	cfg->vmid	= (u16)vmid;
+	cfg->vttbr	= pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
+	cfg->vtcr	= pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
+	return 0;
+}
+
+static int arm_smmu_domain_finalise(struct iommu_domain *domain)
+{
+	int ret;
+	unsigned long ias, oas;
+	enum io_pgtable_fmt fmt;
+	struct io_pgtable_cfg pgtbl_cfg;
+	struct io_pgtable_ops *pgtbl_ops;
+	int (*finalise_stage_fn)(struct arm_smmu_domain *,
+				 struct io_pgtable_cfg *);
+	struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+
+	if (domain->type == IOMMU_DOMAIN_IDENTITY) {
+		smmu_domain->stage = ARM_SMMU_DOMAIN_BYPASS;
+		return 0;
+	}
+
+	/* Restrict the stage to what we can actually support */
+	if (!(smmu->features & ARM_SMMU_FEAT_TRANS_S1))
+		smmu_domain->stage = ARM_SMMU_DOMAIN_S2;
+	if (!(smmu->features & ARM_SMMU_FEAT_TRANS_S2))
+		smmu_domain->stage = ARM_SMMU_DOMAIN_S1;
+
+	switch (smmu_domain->stage) {
+	case ARM_SMMU_DOMAIN_S1:
+		ias = VA_BITS;
+		oas = smmu->ias;
+		fmt = ARM_64_LPAE_S1;
+		finalise_stage_fn = arm_smmu_domain_finalise_s1;
+		break;
+	case ARM_SMMU_DOMAIN_NESTED:
+	case ARM_SMMU_DOMAIN_S2:
+		ias = smmu->ias;
+		oas = smmu->oas;
+		fmt = ARM_64_LPAE_S2;
+		finalise_stage_fn = arm_smmu_domain_finalise_s2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	pgtbl_cfg = (struct io_pgtable_cfg) {
+		.pgsize_bitmap	= smmu->pgsize_bitmap,
+		.ias		= ias,
+		.oas		= oas,
+		.tlb		= &arm_smmu_gather_ops,
+		.iommu_dev	= smmu->dev,
+	};
+
+	if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
+		pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
+
+	pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
+	if (!pgtbl_ops)
+		return -ENOMEM;
+
+	domain->pgsize_bitmap = pgtbl_cfg.pgsize_bitmap;
+	domain->geometry.aperture_end = (1UL << ias) - 1;
+	domain->geometry.force_aperture = true;
+	smmu_domain->pgtbl_ops = pgtbl_ops;
+
+	ret = finalise_stage_fn(smmu_domain, &pgtbl_cfg);
+	if (ret < 0)
+		free_io_pgtable_ops(pgtbl_ops);
+
+	return ret;
+}
+
+static __le64 *arm_smmu_get_step_for_sid(struct arm_smmu_device *smmu, u32 sid)
+{
+	__le64 *step;
+	struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
+
+	if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB) {
+		struct arm_smmu_strtab_l1_desc *l1_desc;
+		int idx;
+
+		/* Two-level walk */
+		idx = (sid >> STRTAB_SPLIT) * STRTAB_L1_DESC_DWORDS;
+		l1_desc = &cfg->l1_desc[idx];
+		idx = (sid & ((1 << STRTAB_SPLIT) - 1)) * STRTAB_STE_DWORDS;
+		step = &l1_desc->l2ptr[idx];
+	} else {
+		/* Simple linear lookup */
+		step = &cfg->strtab[sid * STRTAB_STE_DWORDS];
+	}
+
+	return step;
+}
+
+static void arm_smmu_install_ste_for_dev(struct iommu_fwspec *fwspec)
+{
+	int i;
+	struct arm_smmu_master_data *master = fwspec->iommu_priv;
+	struct arm_smmu_device *smmu = master->smmu;
+
+	for (i = 0; i < fwspec->num_ids; ++i) {
+		u32 sid = fwspec->ids[i];
+		__le64 *step = arm_smmu_get_step_for_sid(smmu, sid);
+
+		arm_smmu_write_strtab_ent(smmu, sid, step, &master->ste);
+	}
+}
+
+static void arm_smmu_detach_dev(struct device *dev)
+{
+	struct arm_smmu_master_data *master = dev->iommu_fwspec->iommu_priv;
+
+	master->ste.assigned = false;
+	arm_smmu_install_ste_for_dev(dev->iommu_fwspec);
+}
+
+static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
+{
+	int ret = 0;
+	struct arm_smmu_device *smmu;
+	struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+	struct arm_smmu_master_data *master;
+	struct arm_smmu_strtab_ent *ste;
+
+	if (!dev->iommu_fwspec)
+		return -ENOENT;
+
+	master = dev->iommu_fwspec->iommu_priv;
+	smmu = master->smmu;
+	ste = &master->ste;
+
+	/* Already attached to a different domain? */
+	if (ste->assigned)
+		arm_smmu_detach_dev(dev);
+
+	mutex_lock(&smmu_domain->init_mutex);
+
+	if (!smmu_domain->smmu) {
+		smmu_domain->smmu = smmu;
+		ret = arm_smmu_domain_finalise(domain);
+		if (ret) {
+			smmu_domain->smmu = NULL;
+			goto out_unlock;
+		}
+	} else if (smmu_domain->smmu != smmu) {
+		dev_err(dev,
+			"cannot attach to SMMU %s (upstream of %s)\n",
+			dev_name(smmu_domain->smmu->dev),
+			dev_name(smmu->dev));
+		ret = -ENXIO;
+		goto out_unlock;
+	}
+
+	ste->assigned = true;
+
+	if (smmu_domain->stage == ARM_SMMU_DOMAIN_BYPASS) {
+		ste->s1_cfg = NULL;
+		ste->s2_cfg = NULL;
+	} else if (smmu_domain->stage == ARM_SMMU_DOMAIN_S1) {
+		ste->s1_cfg = &smmu_domain->s1_cfg;
+		ste->s2_cfg = NULL;
+		arm_smmu_write_ctx_desc(smmu, ste->s1_cfg);
+	} else {
+		ste->s1_cfg = NULL;
+		ste->s2_cfg = &smmu_domain->s2_cfg;
+	}
+
+	arm_smmu_install_ste_for_dev(dev->iommu_fwspec);
+out_unlock:
+	mutex_unlock(&smmu_domain->init_mutex);
+	return ret;
+}
+
+static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
+			phys_addr_t paddr, size_t size, int prot)
+{
+	struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
+
+	if (!ops)
+		return -ENODEV;
+
+	return ops->map(ops, iova, paddr, size, prot);
+}
+
+static size_t
+arm_smmu_unmap(struct iommu_domain *domain, unsigned long iova, size_t size)
+{
+	struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
+
+	if (!ops)
+		return 0;
+
+	return ops->unmap(ops, iova, size);
+}
+
+static phys_addr_t
+arm_smmu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova)
+{
+	struct io_pgtable_ops *ops = to_smmu_domain(domain)->pgtbl_ops;
+
+	if (domain->type == IOMMU_DOMAIN_IDENTITY)
+		return iova;
+
+	if (!ops)
+		return 0;
+
+	return ops->iova_to_phys(ops, iova);
+}
+
+static struct platform_driver arm_smmu_driver;
+
+static int arm_smmu_match_node(struct device *dev, void *data)
+{
+	return dev->fwnode == data;
+}
+
+static
+struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
+{
+	struct device *dev = driver_find_device(&arm_smmu_driver.driver, NULL,
+						fwnode, arm_smmu_match_node);
+	put_device(dev);
+	return dev ? dev_get_drvdata(dev) : NULL;
+}
+
+static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
+{
+	unsigned long limit = smmu->strtab_cfg.num_l1_ents;
+
+	if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB)
+		limit *= 1UL << STRTAB_SPLIT;
+
+	return sid < limit;
+}
+
+static struct iommu_ops arm_smmu_ops;
+
+static int arm_smmu_add_device(struct device *dev)
+{
+	int i, ret;
+	struct arm_smmu_device *smmu;
+	struct arm_smmu_master_data *master;
+	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
+	struct iommu_group *group;
+
+	if (!fwspec || fwspec->ops != &arm_smmu_ops)
+		return -ENODEV;
+	/*
+	 * We _can_ actually withstand dodgy bus code re-calling add_device()
+	 * without an intervening remove_device()/of_xlate() sequence, but
+	 * we're not going to do so quietly...
+	 */
+	if (WARN_ON_ONCE(fwspec->iommu_priv)) {
+		master = fwspec->iommu_priv;
+		smmu = master->smmu;
+	} else {
+		smmu = arm_smmu_get_by_fwnode(fwspec->iommu_fwnode);
+		if (!smmu)
+			return -ENODEV;
+		master = kzalloc(sizeof(*master), GFP_KERNEL);
+		if (!master)
+			return -ENOMEM;
+
+		master->smmu = smmu;
+		fwspec->iommu_priv = master;
+	}
+
+	/* Check the SIDs are in range of the SMMU and our stream table */
+	for (i = 0; i < fwspec->num_ids; i++) {
+		u32 sid = fwspec->ids[i];
+
+		if (!arm_smmu_sid_in_range(smmu, sid))
+			return -ERANGE;
+
+		/* Ensure l2 strtab is initialised */
+		if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB) {
+			ret = arm_smmu_init_l2_strtab(smmu, sid);
+			if (ret)
+				return ret;
+		}
+	}
+
+	group = iommu_group_get_for_dev(dev);
+	if (!IS_ERR(group)) {
+		iommu_group_put(group);
+		iommu_device_link(&smmu->iommu, dev);
+	}
+
+	return PTR_ERR_OR_ZERO(group);
+}
+
+static void arm_smmu_remove_device(struct device *dev)
+{
+	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
+	struct arm_smmu_master_data *master;
+	struct arm_smmu_device *smmu;
+
+	if (!fwspec || fwspec->ops != &arm_smmu_ops)
+		return;
+
+	master = fwspec->iommu_priv;
+	smmu = master->smmu;
+	if (master && master->ste.assigned)
+		arm_smmu_detach_dev(dev);
+	iommu_group_remove_device(dev);
+	iommu_device_unlink(&smmu->iommu, dev);
+	kfree(master);
+	iommu_fwspec_free(dev);
+}
+
+static struct iommu_group *arm_smmu_device_group(struct device *dev)
+{
+	struct iommu_group *group;
+
+	/*
+	 * We don't support devices sharing stream IDs other than PCI RID
+	 * aliases, since the necessary ID-to-device lookup becomes rather
+	 * impractical given a potential sparse 32-bit stream ID space.
+	 */
+	if (dev_is_pci(dev))
+		group = pci_device_group(dev);
+	else
+		group = generic_device_group(dev);
+
+	return group;
+}
+
+static int arm_smmu_domain_get_attr(struct iommu_domain *domain,
+				    enum iommu_attr attr, void *data)
+{
+	struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+
+	if (domain->type != IOMMU_DOMAIN_UNMANAGED)
+		return -EINVAL;
+
+	switch (attr) {
+	case DOMAIN_ATTR_NESTING:
+		*(int *)data = (smmu_domain->stage == ARM_SMMU_DOMAIN_NESTED);
+		return 0;
+	default:
+		return -ENODEV;
+	}
+}
+
+static int arm_smmu_domain_set_attr(struct iommu_domain *domain,
+				    enum iommu_attr attr, void *data)
+{
+	int ret = 0;
+	struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+
+	if (domain->type != IOMMU_DOMAIN_UNMANAGED)
+		return -EINVAL;
+
+	mutex_lock(&smmu_domain->init_mutex);
+
+	switch (attr) {
+	case DOMAIN_ATTR_NESTING:
+		if (smmu_domain->smmu) {
+			ret = -EPERM;
+			goto out_unlock;
+		}
+
+		if (*(int *)data)
+			smmu_domain->stage = ARM_SMMU_DOMAIN_NESTED;
+		else
+			smmu_domain->stage = ARM_SMMU_DOMAIN_S1;
+
+		break;
+	default:
+		ret = -ENODEV;
+	}
+
+out_unlock:
+	mutex_unlock(&smmu_domain->init_mutex);
+	return ret;
+}
+
+static int arm_smmu_of_xlate(struct device *dev, struct of_phandle_args *args)
+{
+	return iommu_fwspec_add_ids(dev, args->args, 1);
+}
+
+static void arm_smmu_get_resv_regions(struct device *dev,
+				      struct list_head *head)
+{
+	struct iommu_resv_region *region;
+	int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
+
+	region = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH,
+					 prot, IOMMU_RESV_SW_MSI);
+	if (!region)
+		return;
+
+	list_add_tail(&region->list, head);
+
+	iommu_dma_get_resv_regions(dev, head);
+}
+
+static void arm_smmu_put_resv_regions(struct device *dev,
+				      struct list_head *head)
+{
+	struct iommu_resv_region *entry, *next;
+
+	list_for_each_entry_safe(entry, next, head, list)
+		kfree(entry);
+}
+
+static struct iommu_ops arm_smmu_ops = {
+	.capable		= arm_smmu_capable,
+	.domain_alloc		= arm_smmu_domain_alloc,
+	.domain_free		= arm_smmu_domain_free,
+	.attach_dev		= arm_smmu_attach_dev,
+	.map			= arm_smmu_map,
+	.unmap			= arm_smmu_unmap,
+	.map_sg			= default_iommu_map_sg,
+	.iova_to_phys		= arm_smmu_iova_to_phys,
+	.add_device		= arm_smmu_add_device,
+	.remove_device		= arm_smmu_remove_device,
+	.device_group		= arm_smmu_device_group,
+	.domain_get_attr	= arm_smmu_domain_get_attr,
+	.domain_set_attr	= arm_smmu_domain_set_attr,
+	.of_xlate		= arm_smmu_of_xlate,
+	.get_resv_regions	= arm_smmu_get_resv_regions,
+	.put_resv_regions	= arm_smmu_put_resv_regions,
+	.pgsize_bitmap		= -1UL, /* Restricted during device attach */
+};
+
+/* Probing and initialisation functions */
+static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
+				   struct arm_smmu_queue *q,
+				   unsigned long prod_off,
+				   unsigned long cons_off,
+				   size_t dwords)
+{
+	size_t qsz = ((1 << q->max_n_shift) * dwords) << 3;
+
+	q->base = dmam_alloc_coherent(smmu->dev, qsz, &q->base_dma, GFP_KERNEL);
+	if (!q->base) {
+		dev_err(smmu->dev, "failed to allocate queue (0x%zx bytes)\n",
+			qsz);
+		return -ENOMEM;
+	}
+
+	q->prod_reg	= arm_smmu_page1_fixup(prod_off, smmu);
+	q->cons_reg	= arm_smmu_page1_fixup(cons_off, smmu);
+	q->ent_dwords	= dwords;
+
+	q->q_base  = Q_BASE_RWA;
+	q->q_base |= q->base_dma & Q_BASE_ADDR_MASK << Q_BASE_ADDR_SHIFT;
+	q->q_base |= (q->max_n_shift & Q_BASE_LOG2SIZE_MASK)
+		     << Q_BASE_LOG2SIZE_SHIFT;
+
+	q->prod = q->cons = 0;
+	return 0;
+}
+
+static int arm_smmu_init_queues(struct arm_smmu_device *smmu)
+{
+	int ret;
+
+	/* cmdq */
+	spin_lock_init(&smmu->cmdq.lock);
+	ret = arm_smmu_init_one_queue(smmu, &smmu->cmdq.q, ARM_SMMU_CMDQ_PROD,
+				      ARM_SMMU_CMDQ_CONS, CMDQ_ENT_DWORDS);
+	if (ret)
+		return ret;
+
+	/* evtq */
+	ret = arm_smmu_init_one_queue(smmu, &smmu->evtq.q, ARM_SMMU_EVTQ_PROD,
+				      ARM_SMMU_EVTQ_CONS, EVTQ_ENT_DWORDS);
+	if (ret)
+		return ret;
+
+	/* priq */
+	if (!(smmu->features & ARM_SMMU_FEAT_PRI))
+		return 0;
+
+	return arm_smmu_init_one_queue(smmu, &smmu->priq.q, ARM_SMMU_PRIQ_PROD,
+				       ARM_SMMU_PRIQ_CONS, PRIQ_ENT_DWORDS);
+}
+
+static int arm_smmu_init_l1_strtab(struct arm_smmu_device *smmu)
+{
+	unsigned int i;
+	struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
+	size_t size = sizeof(*cfg->l1_desc) * cfg->num_l1_ents;
+	void *strtab = smmu->strtab_cfg.strtab;
+
+	cfg->l1_desc = devm_kzalloc(smmu->dev, size, GFP_KERNEL);
+	if (!cfg->l1_desc) {
+		dev_err(smmu->dev, "failed to allocate l1 stream table desc\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < cfg->num_l1_ents; ++i) {
+		arm_smmu_write_strtab_l1_desc(strtab, &cfg->l1_desc[i]);
+		strtab += STRTAB_L1_DESC_DWORDS << 3;
+	}
+
+	return 0;
+}
+
+static int arm_smmu_init_strtab_2lvl(struct arm_smmu_device *smmu)
+{
+	void *strtab;
+	u64 reg;
+	u32 size, l1size;
+	struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
+
+	/* Calculate the L1 size, capped to the SIDSIZE. */
+	size = STRTAB_L1_SZ_SHIFT - (ilog2(STRTAB_L1_DESC_DWORDS) + 3);
+	size = min(size, smmu->sid_bits - STRTAB_SPLIT);
+	cfg->num_l1_ents = 1 << size;
+
+	size += STRTAB_SPLIT;
+	if (size < smmu->sid_bits)
+		dev_warn(smmu->dev,
+			 "2-level strtab only covers %u/%u bits of SID\n",
+			 size, smmu->sid_bits);
+
+	l1size = cfg->num_l1_ents * (STRTAB_L1_DESC_DWORDS << 3);
+	strtab = dmam_alloc_coherent(smmu->dev, l1size, &cfg->strtab_dma,
+				     GFP_KERNEL | __GFP_ZERO);
+	if (!strtab) {
+		dev_err(smmu->dev,
+			"failed to allocate l1 stream table (%u bytes)\n",
+			size);
+		return -ENOMEM;
+	}
+	cfg->strtab = strtab;
+
+	/* Configure strtab_base_cfg for 2 levels */
+	reg  = STRTAB_BASE_CFG_FMT_2LVL;
+	reg |= (size & STRTAB_BASE_CFG_LOG2SIZE_MASK)
+		<< STRTAB_BASE_CFG_LOG2SIZE_SHIFT;
+	reg |= (STRTAB_SPLIT & STRTAB_BASE_CFG_SPLIT_MASK)
+		<< STRTAB_BASE_CFG_SPLIT_SHIFT;
+	cfg->strtab_base_cfg = reg;
+
+	return arm_smmu_init_l1_strtab(smmu);
+}
+
+static int arm_smmu_init_strtab_linear(struct arm_smmu_device *smmu)
+{
+	void *strtab;
+	u64 reg;
+	u32 size;
+	struct arm_smmu_strtab_cfg *cfg = &smmu->strtab_cfg;
+
+	size = (1 << smmu->sid_bits) * (STRTAB_STE_DWORDS << 3);
+	strtab = dmam_alloc_coherent(smmu->dev, size, &cfg->strtab_dma,
+				     GFP_KERNEL | __GFP_ZERO);
+	if (!strtab) {
+		dev_err(smmu->dev,
+			"failed to allocate linear stream table (%u bytes)\n",
+			size);
+		return -ENOMEM;
+	}
+	cfg->strtab = strtab;
+	cfg->num_l1_ents = 1 << smmu->sid_bits;
+
+	/* Configure strtab_base_cfg for a linear table covering all SIDs */
+	reg  = STRTAB_BASE_CFG_FMT_LINEAR;
+	reg |= (smmu->sid_bits & STRTAB_BASE_CFG_LOG2SIZE_MASK)
+		<< STRTAB_BASE_CFG_LOG2SIZE_SHIFT;
+	cfg->strtab_base_cfg = reg;
+
+	arm_smmu_init_bypass_stes(strtab, cfg->num_l1_ents);
+	return 0;
+}
+
+static int arm_smmu_init_strtab(struct arm_smmu_device *smmu)
+{
+	u64 reg;
+	int ret;
+
+	if (smmu->features & ARM_SMMU_FEAT_2_LVL_STRTAB)
+		ret = arm_smmu_init_strtab_2lvl(smmu);
+	else
+		ret = arm_smmu_init_strtab_linear(smmu);
+
+	if (ret)
+		return ret;
+
+	/* Set the strtab base address */
+	reg  = smmu->strtab_cfg.strtab_dma &
+	       STRTAB_BASE_ADDR_MASK << STRTAB_BASE_ADDR_SHIFT;
+	reg |= STRTAB_BASE_RA;
+	smmu->strtab_cfg.strtab_base = reg;
+
+	/* Allocate the first VMID for stage-2 bypass STEs */
+	set_bit(0, smmu->vmid_map);
+	return 0;
+}
+
+static int arm_smmu_init_structures(struct arm_smmu_device *smmu)
+{
+	int ret;
+
+	ret = arm_smmu_init_queues(smmu);
+	if (ret)
+		return ret;
+
+	return arm_smmu_init_strtab(smmu);
+}
+
+static int arm_smmu_write_reg_sync(struct arm_smmu_device *smmu, u32 val,
+				   unsigned int reg_off, unsigned int ack_off)
+{
+	u32 reg;
+
+	writel_relaxed(val, smmu->base + reg_off);
+	return readl_relaxed_poll_timeout(smmu->base + ack_off, reg, reg == val,
+					  1, ARM_SMMU_POLL_TIMEOUT_US);
+}
+
+/* GBPA is "special" */
+static int arm_smmu_update_gbpa(struct arm_smmu_device *smmu, u32 set, u32 clr)
+{
+	int ret;
+	u32 reg, __iomem *gbpa = smmu->base + ARM_SMMU_GBPA;
+
+	ret = readl_relaxed_poll_timeout(gbpa, reg, !(reg & GBPA_UPDATE),
+					 1, ARM_SMMU_POLL_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	reg &= ~clr;
+	reg |= set;
+	writel_relaxed(reg | GBPA_UPDATE, gbpa);
+	return readl_relaxed_poll_timeout(gbpa, reg, !(reg & GBPA_UPDATE),
+					  1, ARM_SMMU_POLL_TIMEOUT_US);
+}
+
+static void arm_smmu_free_msis(void *data)
+{
+	struct device *dev = data;
+	platform_msi_domain_free_irqs(dev);
+}
+
+static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+	phys_addr_t doorbell;
+	struct device *dev = msi_desc_to_dev(desc);
+	struct arm_smmu_device *smmu = dev_get_drvdata(dev);
+	phys_addr_t *cfg = arm_smmu_msi_cfg[desc->platform.msi_index];
+
+	doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo;
+	doorbell &= MSI_CFG0_ADDR_MASK << MSI_CFG0_ADDR_SHIFT;
+
+	writeq_relaxed(doorbell, smmu->base + cfg[0]);
+	writel_relaxed(msg->data, smmu->base + cfg[1]);
+	writel_relaxed(MSI_CFG2_MEMATTR_DEVICE_nGnRE, smmu->base + cfg[2]);
+}
+
+static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
+{
+	struct msi_desc *desc;
+	int ret, nvec = ARM_SMMU_MAX_MSIS;
+	struct device *dev = smmu->dev;
+
+	/* Clear the MSI address regs */
+	writeq_relaxed(0, smmu->base + ARM_SMMU_GERROR_IRQ_CFG0);
+	writeq_relaxed(0, smmu->base + ARM_SMMU_EVTQ_IRQ_CFG0);
+
+	if (smmu->features & ARM_SMMU_FEAT_PRI)
+		writeq_relaxed(0, smmu->base + ARM_SMMU_PRIQ_IRQ_CFG0);
+	else
+		nvec--;
+
+	if (!(smmu->features & ARM_SMMU_FEAT_MSI))
+		return;
+
+	/* Allocate MSIs for evtq, gerror and priq. Ignore cmdq */
+	ret = platform_msi_domain_alloc_irqs(dev, nvec, arm_smmu_write_msi_msg);
+	if (ret) {
+		dev_warn(dev, "failed to allocate MSIs\n");
+		return;
+	}
+
+	for_each_msi_entry(desc, dev) {
+		switch (desc->platform.msi_index) {
+		case EVTQ_MSI_INDEX:
+			smmu->evtq.q.irq = desc->irq;
+			break;
+		case GERROR_MSI_INDEX:
+			smmu->gerr_irq = desc->irq;
+			break;
+		case PRIQ_MSI_INDEX:
+			smmu->priq.q.irq = desc->irq;
+			break;
+		default:	/* Unknown */
+			continue;
+		}
+	}
+
+	/* Add callback to free MSIs on teardown */
+	devm_add_action(dev, arm_smmu_free_msis, dev);
+}
+
+static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
+{
+	int irq, ret;
+
+	arm_smmu_setup_msis(smmu);
+
+	/* Request interrupt lines */
+	irq = smmu->evtq.q.irq;
+	if (irq) {
+		ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
+						arm_smmu_evtq_thread,
+						IRQF_ONESHOT,
+						"arm-smmu-v3-evtq", smmu);
+		if (ret < 0)
+			dev_warn(smmu->dev, "failed to enable evtq irq\n");
+	}
+
+	irq = smmu->cmdq.q.irq;
+	if (irq) {
+		ret = devm_request_irq(smmu->dev, irq,
+				       arm_smmu_cmdq_sync_handler, 0,
+				       "arm-smmu-v3-cmdq-sync", smmu);
+		if (ret < 0)
+			dev_warn(smmu->dev, "failed to enable cmdq-sync irq\n");
+	}
+
+	irq = smmu->gerr_irq;
+	if (irq) {
+		ret = devm_request_irq(smmu->dev, irq, arm_smmu_gerror_handler,
+				       0, "arm-smmu-v3-gerror", smmu);
+		if (ret < 0)
+			dev_warn(smmu->dev, "failed to enable gerror irq\n");
+	}
+
+	if (smmu->features & ARM_SMMU_FEAT_PRI) {
+		irq = smmu->priq.q.irq;
+		if (irq) {
+			ret = devm_request_threaded_irq(smmu->dev, irq, NULL,
+							arm_smmu_priq_thread,
+							IRQF_ONESHOT,
+							"arm-smmu-v3-priq",
+							smmu);
+			if (ret < 0)
+				dev_warn(smmu->dev,
+					 "failed to enable priq irq\n");
+		}
+	}
+}
+
+static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
+{
+	int ret, irq;
+	u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN;
+
+	/* Disable IRQs first */
+	ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_IRQ_CTRL,
+				      ARM_SMMU_IRQ_CTRLACK);
+	if (ret) {
+		dev_err(smmu->dev, "failed to disable irqs\n");
+		return ret;
+	}
+
+	irq = smmu->combined_irq;
+	if (irq) {
+		/*
+		 * Cavium ThunderX2 implementation doesn't not support unique
+		 * irq lines. Use single irq line for all the SMMUv3 interrupts.
+		 */
+		ret = devm_request_threaded_irq(smmu->dev, irq,
+					arm_smmu_combined_irq_handler,
+					arm_smmu_combined_irq_thread,
+					IRQF_ONESHOT,
+					"arm-smmu-v3-combined-irq", smmu);
+		if (ret < 0)
+			dev_warn(smmu->dev, "failed to enable combined irq\n");
+	} else
+		arm_smmu_setup_unique_irqs(smmu);
+
+	if (smmu->features & ARM_SMMU_FEAT_PRI)
+		irqen_flags |= IRQ_CTRL_PRIQ_IRQEN;
+
+	/* Enable interrupt generation on the SMMU */
+	ret = arm_smmu_write_reg_sync(smmu, irqen_flags,
+				      ARM_SMMU_IRQ_CTRL, ARM_SMMU_IRQ_CTRLACK);
+	if (ret)
+		dev_warn(smmu->dev, "failed to enable irqs\n");
+
+	return 0;
+}
+
+static int arm_smmu_device_disable(struct arm_smmu_device *smmu)
+{
+	int ret;
+
+	ret = arm_smmu_write_reg_sync(smmu, 0, ARM_SMMU_CR0, ARM_SMMU_CR0ACK);
+	if (ret)
+		dev_err(smmu->dev, "failed to clear cr0\n");
+
+	return ret;
+}
+
+static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass)
+{
+	int ret;
+	u32 reg, enables;
+	struct arm_smmu_cmdq_ent cmd;
+
+	/* Clear CR0 and sync (disables SMMU and queue processing) */
+	reg = readl_relaxed(smmu->base + ARM_SMMU_CR0);
+	if (reg & CR0_SMMUEN)
+		dev_warn(smmu->dev, "SMMU currently enabled! Resetting...\n");
+
+	ret = arm_smmu_device_disable(smmu);
+	if (ret)
+		return ret;
+
+	/* CR1 (table and queue memory attributes) */
+	reg = (CR1_SH_ISH << CR1_TABLE_SH_SHIFT) |
+	      (CR1_CACHE_WB << CR1_TABLE_OC_SHIFT) |
+	      (CR1_CACHE_WB << CR1_TABLE_IC_SHIFT) |
+	      (CR1_SH_ISH << CR1_QUEUE_SH_SHIFT) |
+	      (CR1_CACHE_WB << CR1_QUEUE_OC_SHIFT) |
+	      (CR1_CACHE_WB << CR1_QUEUE_IC_SHIFT);
+	writel_relaxed(reg, smmu->base + ARM_SMMU_CR1);
+
+	/* CR2 (random crap) */
+	reg = CR2_PTM | CR2_RECINVSID | CR2_E2H;
+	writel_relaxed(reg, smmu->base + ARM_SMMU_CR2);
+
+	/* Stream table */
+	writeq_relaxed(smmu->strtab_cfg.strtab_base,
+		       smmu->base + ARM_SMMU_STRTAB_BASE);
+	writel_relaxed(smmu->strtab_cfg.strtab_base_cfg,
+		       smmu->base + ARM_SMMU_STRTAB_BASE_CFG);
+
+	/* Command queue */
+	writeq_relaxed(smmu->cmdq.q.q_base, smmu->base + ARM_SMMU_CMDQ_BASE);
+	writel_relaxed(smmu->cmdq.q.prod, smmu->base + ARM_SMMU_CMDQ_PROD);
+	writel_relaxed(smmu->cmdq.q.cons, smmu->base + ARM_SMMU_CMDQ_CONS);
+
+	enables = CR0_CMDQEN;
+	ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
+				      ARM_SMMU_CR0ACK);
+	if (ret) {
+		dev_err(smmu->dev, "failed to enable command queue\n");
+		return ret;
+	}
+
+	/* Invalidate any cached configuration */
+	cmd.opcode = CMDQ_OP_CFGI_ALL;
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+	cmd.opcode = CMDQ_OP_CMD_SYNC;
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+
+	/* Invalidate any stale TLB entries */
+	if (smmu->features & ARM_SMMU_FEAT_HYP) {
+		cmd.opcode = CMDQ_OP_TLBI_EL2_ALL;
+		arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+	}
+
+	cmd.opcode = CMDQ_OP_TLBI_NSNH_ALL;
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+	cmd.opcode = CMDQ_OP_CMD_SYNC;
+	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
+
+	/* Event queue */
+	writeq_relaxed(smmu->evtq.q.q_base, smmu->base + ARM_SMMU_EVTQ_BASE);
+	writel_relaxed(smmu->evtq.q.prod,
+		       arm_smmu_page1_fixup(ARM_SMMU_EVTQ_PROD, smmu));
+	writel_relaxed(smmu->evtq.q.cons,
+		       arm_smmu_page1_fixup(ARM_SMMU_EVTQ_CONS, smmu));
+
+	enables |= CR0_EVTQEN;
+	ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
+				      ARM_SMMU_CR0ACK);
+	if (ret) {
+		dev_err(smmu->dev, "failed to enable event queue\n");
+		return ret;
+	}
+
+	/* PRI queue */
+	if (smmu->features & ARM_SMMU_FEAT_PRI) {
+		writeq_relaxed(smmu->priq.q.q_base,
+			       smmu->base + ARM_SMMU_PRIQ_BASE);
+		writel_relaxed(smmu->priq.q.prod,
+			       arm_smmu_page1_fixup(ARM_SMMU_PRIQ_PROD, smmu));
+		writel_relaxed(smmu->priq.q.cons,
+			       arm_smmu_page1_fixup(ARM_SMMU_PRIQ_CONS, smmu));
+
+		enables |= CR0_PRIQEN;
+		ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
+					      ARM_SMMU_CR0ACK);
+		if (ret) {
+			dev_err(smmu->dev, "failed to enable PRI queue\n");
+			return ret;
+		}
+	}
+
+	ret = arm_smmu_setup_irqs(smmu);
+	if (ret) {
+		dev_err(smmu->dev, "failed to setup irqs\n");
+		return ret;
+	}
+
+
+	/* Enable the SMMU interface, or ensure bypass */
+	if (!bypass || disable_bypass) {
+		enables |= CR0_SMMUEN;
+	} else {
+		ret = arm_smmu_update_gbpa(smmu, 0, GBPA_ABORT);
+		if (ret) {
+			dev_err(smmu->dev, "GBPA not responding to update\n");
+			return ret;
+		}
+	}
+	ret = arm_smmu_write_reg_sync(smmu, enables, ARM_SMMU_CR0,
+				      ARM_SMMU_CR0ACK);
+	if (ret) {
+		dev_err(smmu->dev, "failed to enable SMMU interface\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
+{
+	u32 reg;
+	bool coherent = smmu->features & ARM_SMMU_FEAT_COHERENCY;
+
+	/* IDR0 */
+	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR0);
+
+	/* 2-level structures */
+	if ((reg & IDR0_ST_LVL_MASK << IDR0_ST_LVL_SHIFT) == IDR0_ST_LVL_2LVL)
+		smmu->features |= ARM_SMMU_FEAT_2_LVL_STRTAB;
+
+	if (reg & IDR0_CD2L)
+		smmu->features |= ARM_SMMU_FEAT_2_LVL_CDTAB;
+
+	/*
+	 * Translation table endianness.
+	 * We currently require the same endianness as the CPU, but this
+	 * could be changed later by adding a new IO_PGTABLE_QUIRK.
+	 */
+	switch (reg & IDR0_TTENDIAN_MASK << IDR0_TTENDIAN_SHIFT) {
+	case IDR0_TTENDIAN_MIXED:
+		smmu->features |= ARM_SMMU_FEAT_TT_LE | ARM_SMMU_FEAT_TT_BE;
+		break;
+#ifdef __BIG_ENDIAN
+	case IDR0_TTENDIAN_BE:
+		smmu->features |= ARM_SMMU_FEAT_TT_BE;
+		break;
+#else
+	case IDR0_TTENDIAN_LE:
+		smmu->features |= ARM_SMMU_FEAT_TT_LE;
+		break;
+#endif
+	default:
+		dev_err(smmu->dev, "unknown/unsupported TT endianness!\n");
+		return -ENXIO;
+	}
+
+	/* Boolean feature flags */
+	if (IS_ENABLED(CONFIG_PCI_PRI) && reg & IDR0_PRI)
+		smmu->features |= ARM_SMMU_FEAT_PRI;
+
+	if (IS_ENABLED(CONFIG_PCI_ATS) && reg & IDR0_ATS)
+		smmu->features |= ARM_SMMU_FEAT_ATS;
+
+	if (reg & IDR0_SEV)
+		smmu->features |= ARM_SMMU_FEAT_SEV;
+
+	if (reg & IDR0_MSI)
+		smmu->features |= ARM_SMMU_FEAT_MSI;
+
+	if (reg & IDR0_HYP)
+		smmu->features |= ARM_SMMU_FEAT_HYP;
+
+	/*
+	 * The coherency feature as set by FW is used in preference to the ID
+	 * register, but warn on mismatch.
+	 */
+	if (!!(reg & IDR0_COHACC) != coherent)
+		dev_warn(smmu->dev, "IDR0.COHACC overridden by dma-coherent property (%s)\n",
+			 coherent ? "true" : "false");
+
+	switch (reg & IDR0_STALL_MODEL_MASK << IDR0_STALL_MODEL_SHIFT) {
+	case IDR0_STALL_MODEL_STALL:
+		/* Fallthrough */
+	case IDR0_STALL_MODEL_FORCE:
+		smmu->features |= ARM_SMMU_FEAT_STALLS;
+	}
+
+	if (reg & IDR0_S1P)
+		smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
+
+	if (reg & IDR0_S2P)
+		smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
+
+	if (!(reg & (IDR0_S1P | IDR0_S2P))) {
+		dev_err(smmu->dev, "no translation support!\n");
+		return -ENXIO;
+	}
+
+	/* We only support the AArch64 table format at present */
+	switch (reg & IDR0_TTF_MASK << IDR0_TTF_SHIFT) {
+	case IDR0_TTF_AARCH32_64:
+		smmu->ias = 40;
+		/* Fallthrough */
+	case IDR0_TTF_AARCH64:
+		break;
+	default:
+		dev_err(smmu->dev, "AArch64 table format not supported!\n");
+		return -ENXIO;
+	}
+
+	/* ASID/VMID sizes */
+	smmu->asid_bits = reg & IDR0_ASID16 ? 16 : 8;
+	smmu->vmid_bits = reg & IDR0_VMID16 ? 16 : 8;
+
+	/* IDR1 */
+	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR1);
+	if (reg & (IDR1_TABLES_PRESET | IDR1_QUEUES_PRESET | IDR1_REL)) {
+		dev_err(smmu->dev, "embedded implementation not supported\n");
+		return -ENXIO;
+	}
+
+	/* Queue sizes, capped at 4k */
+	smmu->cmdq.q.max_n_shift = min((u32)CMDQ_MAX_SZ_SHIFT,
+				       reg >> IDR1_CMDQ_SHIFT & IDR1_CMDQ_MASK);
+	if (!smmu->cmdq.q.max_n_shift) {
+		/* Odd alignment restrictions on the base, so ignore for now */
+		dev_err(smmu->dev, "unit-length command queue not supported\n");
+		return -ENXIO;
+	}
+
+	smmu->evtq.q.max_n_shift = min((u32)EVTQ_MAX_SZ_SHIFT,
+				       reg >> IDR1_EVTQ_SHIFT & IDR1_EVTQ_MASK);
+	smmu->priq.q.max_n_shift = min((u32)PRIQ_MAX_SZ_SHIFT,
+				       reg >> IDR1_PRIQ_SHIFT & IDR1_PRIQ_MASK);
+
+	/* SID/SSID sizes */
+	smmu->ssid_bits = reg >> IDR1_SSID_SHIFT & IDR1_SSID_MASK;
+	smmu->sid_bits = reg >> IDR1_SID_SHIFT & IDR1_SID_MASK;
+
+	/*
+	 * If the SMMU supports fewer bits than would fill a single L2 stream
+	 * table, use a linear table instead.
+	 */
+	if (smmu->sid_bits <= STRTAB_SPLIT)
+		smmu->features &= ~ARM_SMMU_FEAT_2_LVL_STRTAB;
+
+	/* IDR5 */
+	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR5);
+
+	/* Maximum number of outstanding stalls */
+	smmu->evtq.max_stalls = reg >> IDR5_STALL_MAX_SHIFT
+				& IDR5_STALL_MAX_MASK;
+
+	/* Page sizes */
+	if (reg & IDR5_GRAN64K)
+		smmu->pgsize_bitmap |= SZ_64K | SZ_512M;
+	if (reg & IDR5_GRAN16K)
+		smmu->pgsize_bitmap |= SZ_16K | SZ_32M;
+	if (reg & IDR5_GRAN4K)
+		smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
+
+	if (arm_smmu_ops.pgsize_bitmap == -1UL)
+		arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
+	else
+		arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
+
+	/* Output address size */
+	switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
+	case IDR5_OAS_32_BIT:
+		smmu->oas = 32;
+		break;
+	case IDR5_OAS_36_BIT:
+		smmu->oas = 36;
+		break;
+	case IDR5_OAS_40_BIT:
+		smmu->oas = 40;
+		break;
+	case IDR5_OAS_42_BIT:
+		smmu->oas = 42;
+		break;
+	case IDR5_OAS_44_BIT:
+		smmu->oas = 44;
+		break;
+	default:
+		dev_info(smmu->dev,
+			"unknown output address size. Truncating to 48-bit\n");
+		/* Fallthrough */
+	case IDR5_OAS_48_BIT:
+		smmu->oas = 48;
+	}
+
+	/* Set the DMA mask for our table walker */
+	if (dma_set_mask_and_coherent(smmu->dev, DMA_BIT_MASK(smmu->oas)))
+		dev_warn(smmu->dev,
+			 "failed to set DMA mask for table walker\n");
+
+	smmu->ias = max(smmu->ias, smmu->oas);
+
+	dev_info(smmu->dev, "ias %lu-bit, oas %lu-bit (features 0x%08x)\n",
+		 smmu->ias, smmu->oas, smmu->features);
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static void acpi_smmu_get_options(u32 model, struct arm_smmu_device *smmu)
+{
+	switch (model) {
+	case ACPI_IORT_SMMU_V3_CAVIUM_CN99XX:
+		smmu->options |= ARM_SMMU_OPT_PAGE0_REGS_ONLY;
+		break;
+	case ACPI_IORT_SMMU_HISILICON_HI161X:
+		smmu->options |= ARM_SMMU_OPT_SKIP_PREFETCH;
+		break;
+	}
+
+	dev_notice(smmu->dev, "option mask 0x%x\n", smmu->options);
+}
+
+static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+				      struct arm_smmu_device *smmu)
+{
+	struct acpi_iort_smmu_v3 *iort_smmu;
+	struct device *dev = smmu->dev;
+	struct acpi_iort_node *node;
+
+	node = *(struct acpi_iort_node **)dev_get_platdata(dev);
+
+	/* Retrieve SMMUv3 specific data */
+	iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
+
+	acpi_smmu_get_options(iort_smmu->model, smmu);
+
+	if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
+		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+	return 0;
+}
+#else
+static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
+					     struct arm_smmu_device *smmu)
+{
+	return -ENODEV;
+}
+#endif
+
+static int arm_smmu_device_dt_probe(struct platform_device *pdev,
+				    struct arm_smmu_device *smmu)
+{
+	struct device *dev = &pdev->dev;
+	u32 cells;
+	int ret = -EINVAL;
+
+	if (of_property_read_u32(dev->of_node, "#iommu-cells", &cells))
+		dev_err(dev, "missing #iommu-cells property\n");
+	else if (cells != 1)
+		dev_err(dev, "invalid #iommu-cells value (%d)\n", cells);
+	else
+		ret = 0;
+
+	parse_driver_options(smmu);
+
+	if (of_dma_is_coherent(dev->of_node))
+		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
+
+	return ret;
+}
+
+static unsigned long arm_smmu_resource_size(struct arm_smmu_device *smmu)
+{
+	if (smmu->options & ARM_SMMU_OPT_PAGE0_REGS_ONLY)
+		return SZ_64K;
+	else
+		return SZ_128K;
+}
+
+static int arm_smmu_device_probe(struct platform_device *pdev)
+{
+	int irq, ret;
+	struct resource *res;
+	resource_size_t ioaddr;
+	struct arm_smmu_device *smmu;
+	struct device *dev = &pdev->dev;
+	bool bypass;
+
+	smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
+	if (!smmu) {
+		dev_err(dev, "failed to allocate arm_smmu_device\n");
+		return -ENOMEM;
+	}
+	smmu->dev = dev;
+
+	if (dev->of_node) {
+		ret = arm_smmu_device_dt_probe(pdev, smmu);
+	} else {
+		ret = arm_smmu_device_acpi_probe(pdev, smmu);
+		if (ret == -ENODEV)
+			return ret;
+	}
+
+	/* Set bypass mode according to firmware probing result */
+	bypass = !!ret;
+
+	/* Base address */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (resource_size(res) + 1 < arm_smmu_resource_size(smmu)) {
+		dev_err(dev, "MMIO region too small (%pr)\n", res);
+		return -EINVAL;
+	}
+	ioaddr = res->start;
+
+	smmu->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(smmu->base))
+		return PTR_ERR(smmu->base);
+
+	/* Interrupt lines */
+
+	irq = platform_get_irq_byname(pdev, "combined");
+	if (irq > 0)
+		smmu->combined_irq = irq;
+	else {
+		irq = platform_get_irq_byname(pdev, "eventq");
+		if (irq > 0)
+			smmu->evtq.q.irq = irq;
+
+		irq = platform_get_irq_byname(pdev, "priq");
+		if (irq > 0)
+			smmu->priq.q.irq = irq;
+
+		irq = platform_get_irq_byname(pdev, "cmdq-sync");
+		if (irq > 0)
+			smmu->cmdq.q.irq = irq;
+
+		irq = platform_get_irq_byname(pdev, "gerror");
+		if (irq > 0)
+			smmu->gerr_irq = irq;
+	}
+	/* Probe the h/w */
+	ret = arm_smmu_device_hw_probe(smmu);
+	if (ret)
+		return ret;
+
+	/* Initialise in-memory data structures */
+	ret = arm_smmu_init_structures(smmu);
+	if (ret)
+		return ret;
+
+	/* Record our private device structure */
+	platform_set_drvdata(pdev, smmu);
+
+	/* Reset the device */
+	ret = arm_smmu_device_reset(smmu, bypass);
+	if (ret)
+		return ret;
+
+	/* And we're up. Go go go! */
+	ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
+				     "smmu3.%pa", &ioaddr);
+	if (ret)
+		return ret;
+
+	iommu_device_set_ops(&smmu->iommu, &arm_smmu_ops);
+	iommu_device_set_fwnode(&smmu->iommu, dev->fwnode);
+
+	ret = iommu_device_register(&smmu->iommu);
+	if (ret) {
+		dev_err(dev, "Failed to register iommu\n");
+		return ret;
+	}
+
+#ifdef CONFIG_PCI
+	if (pci_bus_type.iommu_ops != &arm_smmu_ops) {
+		pci_request_acs();
+		ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
+		if (ret)
+			return ret;
+	}
+#endif
+#ifdef CONFIG_ARM_AMBA
+	if (amba_bustype.iommu_ops != &arm_smmu_ops) {
+		ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops);
+		if (ret)
+			return ret;
+	}
+#endif
+	if (platform_bus_type.iommu_ops != &arm_smmu_ops) {
+		ret = bus_set_iommu(&platform_bus_type, &arm_smmu_ops);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static int arm_smmu_device_remove(struct platform_device *pdev)
+{
+	struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
+
+	arm_smmu_device_disable(smmu);
+
+	return 0;
+}
+
+static void arm_smmu_device_shutdown(struct platform_device *pdev)
+{
+	arm_smmu_device_remove(pdev);
+}
+
+static const struct of_device_id arm_smmu_of_match[] = {
+	{ .compatible = "arm,smmu-v3", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
+
+static struct platform_driver arm_smmu_driver = {
+	.driver	= {
+		.name		= "arm-smmu-v3",
+		.of_match_table	= of_match_ptr(arm_smmu_of_match),
+	},
+	.probe	= arm_smmu_device_probe,
+	.remove	= arm_smmu_device_remove,
+	.shutdown = arm_smmu_device_shutdown,
+};
+module_platform_driver(arm_smmu_driver);
+
+IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", NULL);
+
+MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
+MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

[PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Sameer Goel]

This driver follows an approach similar to smmu driver. The intent here
is to reuse as much Linux code as possible.
- Glue code has been introduced to bridge the API calls.
- Called Linux functions from the Xen IOMMU function calls.
- Xen modifications are preceded by /*Xen: comment */
- xen/linux_compat: Add a Linux compat header
  For porting files directly from Linux it is useful to have a function mapping
  definitions from Linux to Xen. This file adds common API functions and
  other defines that are needed for porting arm SMMU drivers.

Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
---
 xen/arch/arm/p2m.c                    |   1 +
 xen/drivers/Kconfig                   |   2 +
 xen/drivers/passthrough/arm/Kconfig   |   8 +
 xen/drivers/passthrough/arm/Makefile  |   1 +
 xen/drivers/passthrough/arm/smmu-v3.c | 892 ++++++++++++++++++++++++++++++++--
 xen/include/xen/linux_compat.h        |  84 ++++
 6 files changed, 959 insertions(+), 29 deletions(-)
 create mode 100644 xen/drivers/passthrough/arm/Kconfig
 create mode 100644 xen/include/xen/linux_compat.h

diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
index 65e8b9c6ea..fef7605fd6 100644
--- a/xen/arch/arm/p2m.c
+++ b/xen/arch/arm/p2m.c
@@ -1460,6 +1460,7 @@ err:
 static void __init setup_virt_paging_one(void *data)
 {
     unsigned long val = (unsigned long)data;
+    /* SMMUv3 S2 cfg vtcr reuses the following value */
     WRITE_SYSREG32(val, VTCR_EL2);
     isb();
 }
diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
index bc3a54f0ea..612655386d 100644
--- a/xen/drivers/Kconfig
+++ b/xen/drivers/Kconfig
@@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
 
 source "drivers/video/Kconfig"
 
+source "drivers/passthrough/arm/Kconfig"
+
 endmenu
diff --git a/xen/drivers/passthrough/arm/Kconfig b/xen/drivers/passthrough/arm/Kconfig
new file mode 100644
index 0000000000..cda899f608
--- /dev/null
+++ b/xen/drivers/passthrough/arm/Kconfig
@@ -0,0 +1,8 @@
+
+config ARM_SMMU_v3
+	bool "ARM SMMUv3 Support"
+	depends on ARM_64
+	help
+	 Support for implementations of the ARM System MMU architecture
+	 version 3.
+
diff --git a/xen/drivers/passthrough/arm/Makefile b/xen/drivers/passthrough/arm/Makefile
index f4cd26e15d..e14732b55c 100644
--- a/xen/drivers/passthrough/arm/Makefile
+++ b/xen/drivers/passthrough/arm/Makefile
@@ -1,2 +1,3 @@
 obj-y += iommu.o
 obj-y += smmu.o
+obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
index e67ba6c40f..f43485fe6e 100644
--- a/xen/drivers/passthrough/arm/smmu-v3.c
+++ b/xen/drivers/passthrough/arm/smmu-v3.c
@@ -18,28 +18,414 @@
  * Author: Will Deacon <will.deacon@arm.com>
  *
  * This driver is powered by bad coffee and bombay mix.
+ *
+ *
+ * Based on Linux drivers/iommu/arm-smmu-v3.c
+ * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
+ *
+ * Xen modifications:
+ * Sameer Goel <sameer.goel@linaro.org>
+ * Copyright (C) 2017, The Linux Foundation, All rights reserved.
+ *
+ */
+
+#include <xen/acpi.h>
+#include <xen/config.h>
+#include <xen/delay.h>
+#include <xen/errno.h>
+#include <xen/err.h>
+#include <xen/irq.h>
+#include <xen/lib.h>
+#include <xen/linux_compat.h>
+#include <xen/list.h>
+#include <xen/mm.h>
+#include <xen/rbtree.h>
+#include <xen/sched.h>
+#include <xen/sizes.h>
+#include <xen/vmap.h>
+#include <acpi/acpi_iort.h>
+#include <asm/atomic.h>
+#include <asm/device.h>
+#include <asm/io.h>
+#include <asm/platform.h>
+
+/* Alias to Xen device tree helpers */
+#define device_node dt_device_node
+#define of_phandle_args dt_phandle_args
+#define of_device_id dt_device_match
+#define of_match_node dt_match_node
+#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
+#define of_property_read_bool dt_property_read_bool
+#define of_parse_phandle_with_args dt_parse_phandle_with_args
+
+/* Xen: Helpers to get device MMIO and IRQs */
+struct resource {
+	u64 addr;
+	u64 size;
+	unsigned int type;
+};
+
+#define resource_size(res) ((res)->size)
+
+#define platform_device device
+
+#define IORESOURCE_MEM 0
+#define IORESOURCE_IRQ 1
+
+static struct resource *platform_get_resource(struct platform_device *pdev,
+					      unsigned int type,
+					      unsigned int num)
+{
+	/*
+	 * The resource is only used between 2 calls of platform_get_resource.
+	 * It's quite ugly but it's avoid to add too much code in the part
+	 * imported from Linux
+	 */
+	static struct resource res;
+	struct acpi_iort_node *iort_node;
+	struct acpi_iort_smmu_v3 *node_smmu_data;
+	int ret = 0;
+
+	res.type = type;
+
+	switch (type) {
+	case IORESOURCE_MEM:
+		if (pdev->type == DEV_ACPI) {
+			ret = 1;
+			iort_node = pdev->acpi_node;
+			node_smmu_data =
+				(struct acpi_iort_smmu_v3 *)iort_node->node_data;
+
+			if (node_smmu_data != NULL) {
+				res.addr = node_smmu_data->base_address;
+				res.size = SZ_128K;
+				ret = 0;
+			}
+		} else {
+			ret = dt_device_get_address(dev_to_dt(pdev), num,
+						    &res.addr, &res.size);
+		}
+
+		return ((ret) ? NULL : &res);
+
+	case IORESOURCE_IRQ:
+		/* ACPI case not implemented as there is no use case for it */
+		ret = platform_get_irq(dev_to_dt(pdev), num);
+
+		if (ret < 0)
+			return NULL;
+
+		res.addr = ret;
+		res.size = 1;
+
+		return &res;
+
+	default:
+		return NULL;
+	}
+}
+
+static int platform_get_irq_byname(struct platform_device *pdev, const char *name)
+{
+	const struct dt_property *dtprop;
+	struct acpi_iort_node *iort_node;
+	struct acpi_iort_smmu_v3 *node_smmu_data;
+	int ret = 0;
+
+	if (pdev->type == DEV_ACPI) {
+		iort_node = pdev->acpi_node;
+		node_smmu_data = (struct acpi_iort_smmu_v3 *)iort_node->node_data;
+
+		if (node_smmu_data != NULL) {
+			if (!strcmp(name, "eventq"))
+				ret = node_smmu_data->event_gsiv;
+			else if (!strcmp(name, "priq"))
+				ret = node_smmu_data->pri_gsiv;
+			else if (!strcmp(name, "cmdq-sync"))
+				ret = node_smmu_data->sync_gsiv;
+			else if (!strcmp(name, "gerror"))
+				ret = node_smmu_data->gerr_gsiv;
+			else
+				ret = -EINVAL;
+		}
+	} else {
+		dtprop = dt_find_property(dev_to_dt(pdev), "interrupt-names", NULL);
+		if (!dtprop)
+			return -EINVAL;
+
+		if (!dtprop->value)
+			return -ENODATA;
+	}
+
+	return ret;
+}
+
+/*
+ * Xen: Helpers for DMA allocation. Just the function name is reused for
+ * porting code these allocation are not managed allocations
  */
 
-#include <linux/acpi.h>
-#include <linux/acpi_iort.h>
-#include <linux/delay.h>
-#include <linux/dma-iommu.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/iommu.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/msi.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_iommu.h>
-#include <linux/of_platform.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-#include <linux/amba/bus.h>
-
-#include "io-pgtable.h"
+static void *dmam_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t gfp)
+{
+	void *vaddr;
+	unsigned long alignment = size;
+
+	/*
+	 * _xzalloc requires that the (align & (align -1)) = 0. Most of the
+	 * allocations in SMMU code should send the right value for size. In
+	 * case this is not true print a warning and align to the size of a
+	 * (void *)
+	 */
+	if (size & (size - 1)) {
+		dev_warn(dev, "Fixing alignment for the DMA buffer\n");
+		alignment = sizeof(void *);
+	}
+
+	vaddr = _xzalloc(size, alignment);
+	if (!vaddr) {
+		dev_err(dev, "DMA allocation failed\n");
+		return NULL;
+	}
+
+	*dma_handle = virt_to_maddr(vaddr);
+
+	return vaddr;
+}
+
+
+static void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
+			dma_addr_t dma_handle)
+{
+	xfree(vaddr);
+}
+
+/* Xen: Stub out DMA domain related functions */
+#define iommu_get_dma_cookie(dom) 0
+#define iommu_put_dma_cookie(dom)
+
+/* Xen: Stub out module param related function */
+#define module_param_named(a, b, c, d)
+#define MODULE_PARM_DESC(a, b)
+
+#define dma_set_mask_and_coherent(d, b) 0
+
+#define of_dma_is_coherent(n) 0
+
+#define MODULE_DEVICE_TABLE(type, name)
+
+static void __iomem *devm_ioremap_resource(struct device *dev,
+					   struct resource *res)
+{
+	void __iomem *ptr;
+
+	if (!res || res->type != IORESOURCE_MEM) {
+		dev_err(dev, "Invalid resource\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	ptr = ioremap_nocache(res->addr, res->size);
+	if (!ptr) {
+		dev_err(dev,
+			"ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
+			res->addr, res->size);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return ptr;
+}
+
+/* Xen: Compatibility define for iommu_domain_geometry.*/
+struct iommu_domain_geometry {
+	dma_addr_t aperture_start; /* First address that can be mapped    */
+	dma_addr_t aperture_end;   /* Last address that can be mapped     */
+	bool force_aperture;       /* DMA only allowed in mappable range? */
+};
+
+
+/* Xen: Type definitions for iommu_domain */
+#define IOMMU_DOMAIN_UNMANAGED 0
+#define IOMMU_DOMAIN_DMA 1
+#define IOMMU_DOMAIN_IDENTITY 2
+
+/* Xen: Dummy iommu_domain */
+struct iommu_domain {
+	/* Runtime SMMU configuration for this iommu_domain */
+	struct arm_smmu_domain		*priv;
+	unsigned int type;
+
+	/* Dummy compatibility defines */
+	unsigned long pgsize_bitmap;
+	struct iommu_domain_geometry geometry;
+
+	atomic_t ref;
+	/*
+	 * Used to link iommu_domain contexts for a same domain.
+	 * There is at least one per-SMMU to used by the domain.
+	 */
+	struct list_head		list;
+};
+
+/* Xen: Describes information required for a Xen domain */
+struct arm_smmu_xen_domain {
+	spinlock_t			lock;
+	/* List of iommu domains associated to this domain */
+	struct list_head		contexts;
+};
+
+/*
+ * Xen: Information about each device stored in dev->archdata.iommu
+ *
+ * The dev->archdata.iommu stores the iommu_domain (runtime configuration of
+ * the SMMU).
+ */
+struct arm_smmu_xen_device {
+	struct iommu_domain *domain;
+};
+
+/*
+ * Xen: io_pgtable compatibility defines.
+ * Most of these are to port in the S1 translation code as is.
+ */
+struct io_pgtable_ops {
+};
+
+struct iommu_gather_ops {
+	void (*tlb_flush_all)(void *cookie);
+	void (*tlb_add_flush)(unsigned long iova, size_t size, size_t granule,
+			      bool leaf, void *cookie);
+	void (*tlb_sync)(void *cookie);
+};
+
+struct io_pgtable_cfg {
+	/*
+	 * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE bits in
+	 *	stage 1 PTEs, for hardware which insists on validating them
+	 *	even in	non-secure state where they should normally be ignored.
+	 *
+	 * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, IOMMU_WRITE and
+	 *	IOMMU_NOEXEC flags and map everything with full access, for
+	 *	hardware which does not implement the permissions of a given
+	 *	format, and/or requires some format-specific default value.
+	 *
+	 * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching invalid
+	 *	(unmapped) entries but the hardware might do so anyway, perform
+	 *	TLB maintenance when mapping as well as when unmapping.
+	 *
+	 * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
+	 *	PTEs, for Mediatek IOMMUs which treat it as a 33rd address bit
+	 *	when the SoC is in "4GB mode" and they can only access the high
+	 *	remap of DRAM (0x1_00000000 to 0x1_ffffffff).
+	 *
+	 * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only ever
+	 *	be accessed by a fully cache-coherent IOMMU or CPU (e.g. for a
+	 *	software-emulated IOMMU), such that pagetable updates need not
+	 *	be treated as explicit DMA data.
+	 */
+	#define IO_PGTABLE_QUIRK_ARM_NS		BIT(0)
+	#define IO_PGTABLE_QUIRK_NO_PERMS	BIT(1)
+	#define IO_PGTABLE_QUIRK_TLBI_ON_MAP	BIT(2)
+	#define IO_PGTABLE_QUIRK_ARM_MTK_4GB	BIT(3)
+	#define IO_PGTABLE_QUIRK_NO_DMA		BIT(4)
+	unsigned long			quirks;
+	unsigned long			pgsize_bitmap;
+	unsigned int			ias;
+	unsigned int			oas;
+	const struct iommu_gather_ops	*tlb;
+	struct device			*iommu_dev;
+
+	/* Low-level data specific to the table format */
+	union {
+		struct {
+			u64	ttbr[2];
+			u64	tcr;
+			u64	mair[2];
+		} arm_lpae_s1_cfg;
+
+		struct {
+			u64	vttbr;
+			u64	vtcr;
+		} arm_lpae_s2_cfg;
+
+		struct {
+			u32	ttbr[2];
+			u32	tcr;
+			u32	nmrr;
+			u32	prrr;
+		} arm_v7s_cfg;
+	};
+};
+
+enum io_pgtable_fmt {
+	ARM_32_LPAE_S1,
+	ARM_32_LPAE_S2,
+	ARM_64_LPAE_S1,
+	ARM_64_LPAE_S2,
+	ARM_V7S,
+	IO_PGTABLE_NUM_FMTS,
+};
+
+/*
+ * Xen: The pgtable_ops are used by the S1 translations, so return the dummy
+ * address.
+ */
+#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
+#define free_io_pgtable_ops(o)
+
+/* Xen: Define wrapper for requesting IRQs */
+#define IRQF_ONESHOT 0
+
+typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
+
+static inline int devm_request_irq(struct device *dev, unsigned int irq,
+				   irq_handler_t handler, unsigned long irqflags,
+				   const char *devname, void *dev_id)
+{
+	/*
+	 * SMMUv3 implementation can support wired interrupt outputs that are
+	 * edge-triggered. Set the irq type as per the spec.
+	 */
+	irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
+	return request_irq(irq, irqflags, handler, devname, dev_id);
+}
+
+/*
+ * Xen does not have a concept of threaded irq, but eventually we can use
+ * tasklets to optimize the following function.
+ */
+int devm_request_threaded_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
+			      irq_handler_t thread_fn, unsigned long irqflags,
+			      const char *devname, void *dev_id)
+{
+	return devm_request_irq(dev, irq, thread_fn, irqflags, devname, dev_id);
+}
+
+/* Xen: The mutex is used only during initialization so the typecast is safe */
+#define mutex spinlock
+#define mutex_init spin_lock_init
+#define mutex_lock spin_lock
+#define mutex_unlock spin_unlock
+
+#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
+({ \
+	s_time_t deadline = NOW() + MICROSECS(timeout_us); \
+	for (;;) { \
+		(val) = op(addr); \
+		if (cond) \
+			break; \
+		if (NOW() > deadline) { \
+			(val) = op(addr); \
+			break; \
+		} \
+	udelay(sleep_us); \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
+#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
+	readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, timeout_us)
+
+#define VA_BITS 0 /* Only needed for S1 translations */
 
 /* MMIO registers */
 #define ARM_SMMU_IDR0			0x0
@@ -433,6 +819,7 @@ enum pri_resp {
 	PRI_RESP_SUCC,
 };
 
+#if 0 /* Xen: No MSI support in this iteration */
 enum arm_smmu_msi_index {
 	EVTQ_MSI_INDEX,
 	GERROR_MSI_INDEX,
@@ -457,6 +844,7 @@ static phys_addr_t arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
 		ARM_SMMU_PRIQ_IRQ_CFG2,
 	},
 };
+#endif
 
 struct arm_smmu_cmdq_ent {
 	/* Common fields */
@@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
 	u16				vmid;
 	u64				vttbr;
 	u64				vtcr;
+	/* Xen: Domain associated to this configuration */
+	struct domain			*domain;
 };
 
 struct arm_smmu_strtab_ent {
@@ -635,9 +1025,21 @@ struct arm_smmu_device {
 	struct arm_smmu_strtab_cfg	strtab_cfg;
 
 	/* IOMMU core code handle */
+#if 0 /*Xen: Generic iommu_device ref not needed here */
 	struct iommu_device		iommu;
+#endif
+	/* Xen: Need to keep a list of SMMU devices */
+	struct list_head                devices;
 };
 
+/* Xen: Keep a list of devices associated with this driver */
+static DEFINE_SPINLOCK(arm_smmu_devices_lock);
+static LIST_HEAD(arm_smmu_devices);
+/* Xen: Helper for finding a device using fwnode */
+static
+struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode);
+
+
 /* SMMU private data for each master */
 struct arm_smmu_master_data {
 	struct arm_smmu_device		*smmu;
@@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
 
 	dev_info(smmu->dev, "unexpected PRI request received:\n");
 	dev_info(smmu->dev,
-		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova 0x%016llx\n",
+		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova %#" PRIx64 "\n",
 		 sid, ssid, grpid, last ? "L" : "",
 		 evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
 		 evt[0] & PRIQ_0_PERM_READ ? "R" : "",
@@ -1346,6 +1748,8 @@ static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
 {
 	arm_smmu_gerror_handler(irq, dev);
 	arm_smmu_cmdq_sync_handler(irq, dev);
+	/*Xen: No threaded irq. So call the required function from here */
+	arm_smmu_combined_irq_thread(irq, dev);
 	return IRQ_WAKE_THREAD;
 }
 
@@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
 	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
 }
 
+/*
+ * Xen: Define the IRQ handlers for xen. The linux functions would be
+ * modified to use the functions defined in the following code. 
+ */
+static void arm_smmu_evtq_thread_xen(int irq, void *dev,
+				       struct cpu_user_regs *regs)
+{
+	arm_smmu_evtq_thread(irq, dev);
+}
+
+static void arm_smmu_priq_thread_xen(int irq, void *dev,
+				       struct cpu_user_regs *regs)
+{
+	arm_smmu_priq_thread(irq, dev);
+}
+
+static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
+				       struct cpu_user_regs *regs)
+{
+	arm_smmu_cmdq_sync_handler(irq, dev);
+}
+
+static void arm_smmu_gerror_handler_xen(int irq, void *dev,
+				       struct cpu_user_regs *regs)
+{
+	arm_smmu_gerror_handler(irq, dev);
+}
+
+static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
+				       struct cpu_user_regs *regs)
+{
+	arm_smmu_combined_irq_handler(irq, dev);
+}
+
+#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
+#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
+#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
+#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
+#define arm_smmu_combined_irq_handler arm_smmu_combined_irq_handler_xen
+
 static void arm_smmu_tlb_sync(void *cookie)
 {
 	struct arm_smmu_domain *smmu_domain = cookie;
@@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops arm_smmu_gather_ops = {
 	.tlb_sync	= arm_smmu_tlb_sync,
 };
 
+#if 0 /*Xen: Unused functionality */
 /* IOMMU API */
 static bool arm_smmu_capable(enum iommu_cap cap)
 {
@@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
 		return false;
 	}
 }
+#endif
 
 static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
 {
@@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct arm_smmu_domain *smmu_domain,
 	if (vmid < 0)
 		return vmid;
 
-	cfg->vmid	= (u16)vmid;
-	cfg->vttbr	= pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
-	cfg->vtcr	= pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
+	/*
+	 * Xen: Get the ttbr and vtcr values
+	 * vttbr: This is a shared value with the domain page table
+	 * vtcr: The TCR settings are the same as CPU since the page
+	 * tables are shared
+	 */
+
+	cfg->vmid	= vmid;
+	cfg->vttbr	= page_to_maddr(cfg->domain->arch.p2m.root);
+	cfg->vtcr	= READ_SYSREG32(VTCR_EL2) & STRTAB_STE_2_VTCR_MASK;
 	return 0;
 }
 
@@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain)
 	if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
 		pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
 
+	/* Xen: pgtbl_ops gets an invalid address */
 	pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
 	if (!pgtbl_ops)
 		return -ENOMEM;
@@ -1721,6 +2175,7 @@ out_unlock:
 	return ret;
 }
 
+#if 0 /* Xen: Unused functionality */
 static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
 			phys_addr_t paddr, size_t size, int prot)
 {
@@ -1772,6 +2227,7 @@ struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
 	put_device(dev);
 	return dev ? dev_get_drvdata(dev) : NULL;
 }
+#endif
 
 static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
 {
@@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
 	return sid < limit;
 }
 
+/* Xen: Unused */
+#if 0
 static struct iommu_ops arm_smmu_ops;
+#endif
+
+/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
+static const struct iommu_ops arm_smmu_iommu_ops;
+#define arm_smmu_ops arm_smmu_iommu_ops
 
 static int arm_smmu_add_device(struct device *dev)
 {
@@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device *dev)
 	struct arm_smmu_device *smmu;
 	struct arm_smmu_master_data *master;
 	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
+#if 0 /*Xen: iommu_group is not needed */
 	struct iommu_group *group;
+#endif
 
+	/* Xen: fwspec->ops are not needed */
 	if (!fwspec || fwspec->ops != &arm_smmu_ops)
 		return -ENODEV;
 	/*
@@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device *dev)
 		}
 	}
 
+/*
+ * Xen: Do not need an iommu group as the stream data is carried by the SMMU
+ * master device object
+ */
+#if 0
 	group = iommu_group_get_for_dev(dev);
 	if (!IS_ERR(group)) {
 		iommu_group_put(group);
@@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device *dev)
 	}
 
 	return PTR_ERR_OR_ZERO(group);
+#endif
+	return 0;
 }
 
+/*
+ * Xen: We can potentially support this function and destroy a device. This
+ * will be relevant for PCI hotplug. So, will be implemented as needed after
+ * passthrough support is available.
+ */
+#if 0
 static void arm_smmu_remove_device(struct device *dev)
 {
 	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
@@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
 	.put_resv_regions	= arm_smmu_put_resv_regions,
 	.pgsize_bitmap		= -1UL, /* Restricted during device attach */
 };
+#endif
 
 /* Probing and initialisation functions */
 static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
@@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct arm_smmu_device *smmu, u32 set, u32 clr)
 					  1, ARM_SMMU_POLL_TIMEOUT_US);
 }
 
+#if 0 /* Xen: There is no MSI support as yet */
 static void arm_smmu_free_msis(void *data)
 {
 	struct device *dev = data;
@@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
 	/* Add callback to free MSIs on teardown */
 	devm_add_action(dev, arm_smmu_free_msis, dev);
 }
+#endif
 
 static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
 {
 	int irq, ret;
 
+#if 0 /*Xen: Cannot setup msis for now */
 	arm_smmu_setup_msis(smmu);
+#endif
 
 	/* Request interrupt lines */
 	irq = smmu->evtq.q.irq;
@@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
 		 * Cavium ThunderX2 implementation doesn't not support unique
 		 * irq lines. Use single irq line for all the SMMUv3 interrupts.
 		 */
-		ret = devm_request_threaded_irq(smmu->dev, irq,
+		/*
+		 * Xen: Does not support threaded irqs, so serialise the setup.
+		 * This is the same for pris and event interrupt lines on other
+		 * systems
+		 */
+		ret = devm_request_irq(smmu->dev, irq,
 					arm_smmu_combined_irq_handler,
-					arm_smmu_combined_irq_thread,
 					IRQF_ONESHOT,
 					"arm-smmu-v3-combined-irq", smmu);
 		if (ret < 0)
@@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 		smmu->features |= ARM_SMMU_FEAT_STALLS;
 	}
 
+/*
+ * Xen: Block stage 1 translations. By doing this here we do not need to set the
+ * domain->stage explicitly.
+ */
+#if 0
 	if (reg & IDR0_S1P)
 		smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
+#endif
 
 	if (reg & IDR0_S2P)
 		smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
@@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 	if (reg & IDR5_GRAN4K)
 		smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
 
+#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
 	if (arm_smmu_ops.pgsize_bitmap == -1UL)
 		arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
 	else
 		arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
+#endif
 
 	/* Output address size */
 	switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
@@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
 	struct device *dev = smmu->dev;
 	struct acpi_iort_node *node;
 
-	node = *(struct acpi_iort_node **)dev_get_platdata(dev);
+	/* Xen: Modification to get iort_node */
+	node = (struct acpi_iort_node *)dev->acpi_node;
 
 	/* Retrieve SMMUv3 specific data */
 	iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
@@ -2703,7 +3200,7 @@ static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
 static int arm_smmu_device_dt_probe(struct platform_device *pdev,
 				    struct arm_smmu_device *smmu)
 {
-	struct device *dev = &pdev->dev;
+	struct device *dev = pdev;
 	u32 cells;
 	int ret = -EINVAL;
 
@@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
 
 	parse_driver_options(smmu);
 
+	/* Xen: of_dma_is_coherent is a stub till dt support is introduced */
 	if (of_dma_is_coherent(dev->of_node))
 		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
 
@@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 {
 	int irq, ret;
 	struct resource *res;
+#if 0 /*Xen: Do not need to setup sysfs */
 	resource_size_t ioaddr;
+#endif
 	struct arm_smmu_device *smmu;
-	struct device *dev = &pdev->dev;
+	struct device *dev = pdev;/* Xen: dev is ignored */
 	bool bypass;
 
 	smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
@@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 		dev_err(dev, "MMIO region too small (%pr)\n", res);
 		return -EINVAL;
 	}
+#if 0 /*Xen: Do not need to setup sysfs */
 	ioaddr = res->start;
+#endif
 
 	smmu->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(smmu->base))
@@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 		return ret;
 
 	/* Record our private device structure */
+	/* Xen: SMMU is not treated a a platform device*/
+#if 0
 	platform_set_drvdata(pdev, smmu);
+#endif
 
 	/* Reset the device */
 	ret = arm_smmu_device_reset(smmu, bypass);
 	if (ret)
 		return ret;
 
+/* Xen: Not creating an IOMMU device list for Xen */
+#if 0
 	/* And we're up. Go go go! */
 	ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
 				     "smmu3.%pa", &ioaddr);
@@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 		if (ret)
 			return ret;
 	}
+#endif
+	/*
+	 * Xen: Keep a list of all probed devices. This will be used to query
+	 * the smmu devices based on the fwnode.
+	 */
+	INIT_LIST_HEAD(&smmu->devices);
+	spin_lock(&arm_smmu_devices_lock);
+	list_add(&smmu->devices, &arm_smmu_devices);
+	spin_unlock(&arm_smmu_devices_lock);
 	return 0;
 }
 
+/* Xen: Unused function */
+#if 0
 static int arm_smmu_device_remove(struct platform_device *pdev)
 {
 	struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
@@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct platform_device *pdev)
 {
 	arm_smmu_device_remove(pdev);
 }
+#endif
+
 
 static const struct of_device_id arm_smmu_of_match[] = {
 	{ .compatible = "arm,smmu-v3", },
@@ -2867,6 +3387,7 @@ static const struct of_device_id arm_smmu_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
 
+#if 0
 static struct platform_driver arm_smmu_driver = {
 	.driver	= {
 		.name		= "arm-smmu-v3",
@@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", NULL);
 MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
 MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
 MODULE_LICENSE("GPL v2");
+#endif
+
+/***** Start of Xen specific code *****/
+
+static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
+{
+	struct arm_smmu_xen_domain *smmu_domain = dom_iommu(d)->arch.priv;
+	struct iommu_domain *cfg;
+
+	spin_lock(&smmu_domain->lock);
+	list_for_each_entry(cfg, &smmu_domain->contexts, list) {
+		/*
+		 * Only invalidate the context when SMMU is present.
+		 * This is because the context initialization is delayed
+		 * until a master has been added.
+		 */
+		if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
+			continue;
+		arm_smmu_tlb_inv_context(cfg->priv);
+	}
+	spin_unlock(&smmu_domain->lock);
+	return 0;
+}
+
+static int __must_check arm_smmu_iotlb_flush(struct domain *d,
+					     unsigned long gfn,
+					     unsigned int page_count)
+{
+	return arm_smmu_iotlb_flush_all(d);
+}
+
+static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
+						struct device *dev)
+{
+	struct iommu_domain *domain;
+	struct arm_smmu_xen_domain *xen_domain;
+	struct arm_smmu_device *smmu;
+	struct arm_smmu_domain *smmu_domain;
+
+	xen_domain = dom_iommu(d)->arch.priv;
+
+	smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
+	if (!smmu)
+		return NULL;
+
+	/*
+	 * Loop through the &xen_domain->contexts to locate a context
+	 * assigned to this SMMU
+	 */
+	list_for_each_entry(domain, &xen_domain->contexts, list) {
+		smmu_domain = to_smmu_domain(domain);
+		if (smmu_domain->smmu == smmu)
+			return domain;
+	}
+
+	return NULL;
+}
+
+static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
+{
+	list_del(&domain->list);
+	arm_smmu_domain_free(domain);
+}
+
+static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
+			       struct device *dev, u32 flag)
+{
+	int ret = 0;
+	struct iommu_domain *domain;
+	struct arm_smmu_xen_domain *xen_domain;
+	struct arm_smmu_domain *arm_smmu;
+
+	xen_domain = dom_iommu(d)->arch.priv;
+
+	if (!dev->archdata.iommu) {
+		dev->archdata.iommu = xzalloc(struct arm_smmu_xen_device);
+		if (!dev->archdata.iommu)
+			return -ENOMEM;
+	}
+
+	ret = arm_smmu_add_device(dev);
+	if (ret)
+		return ret;
+
+	spin_lock(&xen_domain->lock);
+
+	/*
+	 * Check to see if an iommu_domain already exists for this xen domain
+	 * under the same SMMU
+	 */
+	domain = arm_smmu_get_domain(d, dev);
+	if (!domain) {
+
+		domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
+		if (!domain) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		arm_smmu = to_smmu_domain(domain);
+		arm_smmu->s2_cfg.domain = d;
+
+		/* Chain the new context to the domain */
+		list_add(&domain->list, &xen_domain->contexts);
+
+	}
+
+	ret = arm_smmu_attach_dev(domain, dev);
+	if (ret) {
+		if (domain->ref.counter == 0)
+			arm_smmu_destroy_iommu_domain(domain);
+	} else {
+		atomic_inc(&domain->ref);
+	}
+
+out:
+	spin_unlock(&xen_domain->lock);
+	return ret;
+}
+
+static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
+{
+	struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
+	struct arm_smmu_xen_domain *xen_domain;
+	struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
+
+	xen_domain = dom_iommu(d)->arch.priv;
+
+	if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
+		dev_err(dev, " not attached to domain %d\n", d->domain_id);
+		return -ESRCH;
+	}
+
+	spin_lock(&xen_domain->lock);
+
+	arm_smmu_detach_dev(dev);
+	atomic_dec(&domain->ref);
+
+	if (domain->ref.counter == 0)
+		arm_smmu_destroy_iommu_domain(domain);
+
+	spin_unlock(&xen_domain->lock);
+
+	return 0;
+}
+
+static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
+				 u8 devfn,  struct device *dev)
+{
+	int ret = 0;
+
+	/* Don't allow remapping on other domain than hwdom */
+	if (t && t != hardware_domain)
+		return -EPERM;
+
+	if (t == s)
+		return 0;
+
+	ret = arm_smmu_deassign_dev(s, dev);
+	if (ret)
+		return ret;
+
+	if (t) {
+		/* No flags are defined for ARM. */
+		ret = arm_smmu_assign_dev(t, devfn, dev, 0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int arm_smmu_iommu_domain_init(struct domain *d)
+{
+	struct arm_smmu_xen_domain *xen_domain;
+
+	xen_domain = xzalloc(struct arm_smmu_xen_domain);
+	if (!xen_domain)
+		return -ENOMEM;
+
+	spin_lock_init(&xen_domain->lock);
+	INIT_LIST_HEAD(&xen_domain->contexts);
+
+	dom_iommu(d)->arch.priv = xen_domain;
+
+	return 0;
+}
+
+static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
+{
+}
+
+static void arm_smmu_iommu_domain_teardown(struct domain *d)
+{
+	struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
+
+	ASSERT(list_empty(&xen_domain->contexts));
+	xfree(xen_domain);
+}
+
+static int __must_check arm_smmu_map_page(struct domain *d, unsigned long gfn,
+			unsigned long mfn, unsigned int flags)
+{
+	p2m_type_t t;
+
+	/*
+	 * Grant mappings can be used for DMA requests. The dev_bus_addr
+	 * returned by the hypercall is the MFN (not the IPA). For device
+	 * protected by an IOMMU, Xen needs to add a 1:1 mapping in the domain
+	 * p2m to allow DMA request to work.
+	 * This is only valid when the domain is directed mapped. Hence this
+	 * function should only be used by gnttab code with gfn == mfn.
+	 */
+	BUG_ON(!is_domain_direct_mapped(d));
+	BUG_ON(mfn != gfn);
+
+	/* We only support readable and writable flags */
+	if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
+		return -EINVAL;
+
+	t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw : p2m_iommu_map_ro;
+
+	/*
+	 * The function guest_physmap_add_entry replaces the current mapping
+	 * if there is already one...
+	 */
+	return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
+}
+
+static int __must_check arm_smmu_unmap_page(struct domain *d, unsigned long gfn)
+{
+	/*
+	 * This function should only be used by gnttab code when the domain
+	 * is direct mapped
+	 */
+	if (!is_domain_direct_mapped(d))
+		return -EINVAL;
+
+	return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
+}
+
+static const struct iommu_ops arm_smmu_iommu_ops = {
+	.init = arm_smmu_iommu_domain_init,
+	.hwdom_init = arm_smmu_iommu_hwdom_init,
+	.teardown = arm_smmu_iommu_domain_teardown,
+	.iotlb_flush = arm_smmu_iotlb_flush,
+	.iotlb_flush_all = arm_smmu_iotlb_flush_all,
+	.assign_device = arm_smmu_assign_dev,
+	.reassign_device = arm_smmu_reassign_dev,
+	.map_page = arm_smmu_map_page,
+	.unmap_page = arm_smmu_unmap_page,
+};
+
+static
+struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
+{
+	struct arm_smmu_device *smmu = NULL;
+
+	spin_lock(&arm_smmu_devices_lock);
+	list_for_each_entry(smmu, &arm_smmu_devices, devices) {
+		if (smmu->dev->fwnode == fwnode)
+			break;
+	}
+	spin_unlock(&arm_smmu_devices_lock);
+
+	return smmu;
+}
+
+static __init int arm_smmu_dt_init(struct dt_device_node *dev,
+				   const void *data)
+{
+	int rc;
+
+	/*
+	 * Even if the device can't be initialized, we don't want to
+	 * give the SMMU device to dom0.
+	 */
+	dt_device_set_used_by(dev, DOMID_XEN);
+
+	rc = arm_smmu_device_probe(dt_to_dev(dev));
+	if (rc)
+		return rc;
+
+	iommu_set_ops(&arm_smmu_iommu_ops);
+
+	return 0;
+}
+
+DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
+	.dt_match = arm_smmu_of_match,
+	.init = arm_smmu_dt_init,
+DT_DEVICE_END
+
+#ifdef CONFIG_ACPI
+/* Set up the IOMMU */
+static int __init arm_smmu_acpi_init(const void *data)
+{
+	int rc;
+
+	rc = arm_smmu_device_probe((struct device *)data);
+	if (rc)
+		return rc;
+
+	iommu_set_ops(&arm_smmu_iommu_ops);
+	return 0;
+}
+
+ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
+	.class_type = ACPI_IORT_NODE_SMMU_V3,
+	.init = arm_smmu_acpi_init,
+ACPI_DEVICE_END
+
+#endif
diff --git a/xen/include/xen/linux_compat.h b/xen/include/xen/linux_compat.h
new file mode 100644
index 0000000000..8037be0a3e
--- /dev/null
+++ b/xen/include/xen/linux_compat.h
@@ -0,0 +1,84 @@
+/******************************************************************************
+ * include/xen/linux_compat.h
+ *
+ * Compatibility defines for porting code from Linux to Xen
+ *
+ * Copyright (c) 2017 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __XEN_LINUX_COMPAT_H__
+#define __XEN_LINUX_COMPAT_H__
+
+#include <asm/types.h>
+
+typedef paddr_t phys_addr_t;
+typedef paddr_t dma_addr_t;
+
+typedef unsigned int gfp_t;
+#define GFP_KERNEL 0
+#define __GFP_ZERO 0x01U
+
+/* Helpers for IRQ functions */
+#define free_irq release_irq
+
+enum irqreturn {
+    IRQ_NONE,
+    IRQ_HANDLED,
+    IRQ_WAKE_THREAD,
+};
+
+typedef enum irqreturn irqreturn_t;
+
+/* Device logger functions */
+#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## __VA_ARGS__)
+#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
+#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## __VA_ARGS__)
+#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
+#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
+
+#define dev_err_ratelimited(dev, fmt, ...)                  \
+     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
+
+#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
+
+/* Alias to Xen allocation helpers */
+#define kfree xfree
+#define kmalloc(size, flags) ({\
+	void *__ret_alloc = NULL; \
+	if (flags & __GFP_ZERO) \
+		__ret_alloc = _xzalloc(size, sizeof(void *)); \
+	else \
+		__ret_alloc = _xmalloc(size, sizeof(void *)); \
+	__ret_alloc; \
+})
+#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
+#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
+#define kmalloc_array(size, n, flags) ({\
+	void *__ret_alloc = NULL; \
+	if (flags & __GFP_ZERO) \
+		__ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
+	else \
+		__ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
+	__ret_alloc; \
+})
+
+/* Alias to Xen time functions */
+#define ktime_t s_time_t
+#define ktime_get()             (NOW())
+#define ktime_add_us(t,i)       (t + MICROSECS(i))
+#define ktime_compare(t,i)      (t > (i))
+
+#endif /* __XEN_LINUX_COMPAT_H__ */
-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Julien Grall]

Hi,

On 09/02/18 03:10, Sameer Goel wrote:
> This driver follows an approach similar to smmu driver. The intent here
> is to reuse as much Linux code as possible.
> - Glue code has been introduced to bridge the API calls.
> - Called Linux functions from the Xen IOMMU function calls.
> - Xen modifications are preceded by /*Xen: comment */
> - xen/linux_compat: Add a Linux compat header
>    For porting files directly from Linux it is useful to have a function mapping
>    definitions from Linux to Xen. This file adds common API functions and
>    other defines that are needed for porting arm SMMU drivers.

I understand Roger asked for it, but that was not a really wise choice 
given the size of this patch. Anyway, let's keep it like that.

> 
> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
> ---
>   xen/arch/arm/p2m.c                    |   1 +
>   xen/drivers/Kconfig                   |   2 +
>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>   xen/drivers/passthrough/arm/Makefile  |   1 +
>   xen/drivers/passthrough/arm/smmu-v3.c | 892 ++++++++++++++++++++++++++++++++--
>   xen/include/xen/linux_compat.h        |  84 ++++

You need to CC the REST maintainers for that.

>   6 files changed, 959 insertions(+), 29 deletions(-)
>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>   create mode 100644 xen/include/xen/linux_compat.h
> 
> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
> index 65e8b9c6ea..fef7605fd6 100644
> --- a/xen/arch/arm/p2m.c
> +++ b/xen/arch/arm/p2m.c
> @@ -1460,6 +1460,7 @@ err:
>   static void __init setup_virt_paging_one(void *data)
>   {
>       unsigned long val = (unsigned long)data;
> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>       WRITE_SYSREG32(val, VTCR_EL2);
>       isb();
>   }
> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
> index bc3a54f0ea..612655386d 100644
> --- a/xen/drivers/Kconfig
> +++ b/xen/drivers/Kconfig
> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>   
>   source "drivers/video/Kconfig"
>   
> +source "drivers/passthrough/arm/Kconfig"
> +
>   endmenu
> diff --git a/xen/drivers/passthrough/arm/Kconfig b/xen/drivers/passthrough/arm/Kconfig
> new file mode 100644
> index 0000000000..cda899f608
> --- /dev/null
> +++ b/xen/drivers/passthrough/arm/Kconfig
> @@ -0,0 +1,8 @@
> +
> +config ARM_SMMU_v3
> +	bool "ARM SMMUv3 Support"
> +	depends on ARM_64

Why the dependency on Arm64 here?

> +	help
> +	 Support for implementations of the ARM System MMU architecture
> +	 version 3.
> +
> diff --git a/xen/drivers/passthrough/arm/Makefile b/xen/drivers/passthrough/arm/Makefile
> index f4cd26e15d..e14732b55c 100644
> --- a/xen/drivers/passthrough/arm/Makefile
> +++ b/xen/drivers/passthrough/arm/Makefile
> @@ -1,2 +1,3 @@
>   obj-y += iommu.o
>   obj-y += smmu.o
> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
> index e67ba6c40f..f43485fe6e 100644
> --- a/xen/drivers/passthrough/arm/smmu-v3.c
> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
> @@ -18,28 +18,414 @@
>    * Author: Will Deacon <will.deacon@arm.com>
>    *
>    * This driver is powered by bad coffee and bombay mix.
> + *
> + *
> + * Based on Linux drivers/iommu/arm-smmu-v3.c
> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
> + *
> + * Xen modifications:
> + * Sameer Goel <sameer.goel@linaro.org>
> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
> + *
> + */

[...]

> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
> +			   dma_addr_t *dma_handle, gfp_t gfp)
> +{
> +	void *vaddr;
> +	unsigned long alignment = size;
> +
> +	/*
> +	 * _xzalloc requires that the (align & (align -1)) = 0. Most of the
> +	 * allocations in SMMU code should send the right value for size. In
> +	 * case this is not true print a warning and align to the size of a
> +	 * (void *)
> +	 */
> +	if (size & (size - 1)) {
> +		dev_warn(dev, "Fixing alignment for the DMA buffer\n");
> +		alignment = sizeof(void *);
> +	}
> +
> +	vaddr = _xzalloc(size, alignment);
> +	if (!vaddr) {
> +		dev_err(dev, "DMA allocation failed\n");
> +		return NULL;
> +	}
> +
> +	*dma_handle = virt_to_maddr(vaddr);
> +
> +	return vaddr;
> +}
> +
> +

One newline should be enough.

> +static void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
> +			dma_addr_t dma_handle)
> +{
> +	xfree(vaddr);
> +}
> +
> +/* Xen: Stub out DMA domain related functions */
> +#define iommu_get_dma_cookie(dom) 0
> +#define iommu_put_dma_cookie(dom)
> +
> +/* Xen: Stub out module param related function */
> +#define module_param_named(a, b, c, d)
> +#define MODULE_PARM_DESC(a, b)
> +
> +#define dma_set_mask_and_coherent(d, b) 0
> +
> +#define of_dma_is_coherent(n) 0
> +
> +#define MODULE_DEVICE_TABLE(type, name)
> +
> +static void __iomem *devm_ioremap_resource(struct device *dev,
> +					   struct resource *res)
> +{
> +	void __iomem *ptr;
> +
> +	if (!res || res->type != IORESOURCE_MEM) {
> +		dev_err(dev, "Invalid resource\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	ptr = ioremap_nocache(res->addr, res->size);
> +	if (!ptr) {
> +		dev_err(dev,
> +			"ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
> +			res->addr, res->size);
> +		return ERR_PTR(-ENOMEM);
> +	}
> +
> +	return ptr;
> +}
> +
> +/* Xen: Compatibility define for iommu_domain_geometry.*/
> +struct iommu_domain_geometry {
> +	dma_addr_t aperture_start; /* First address that can be mapped    */
> +	dma_addr_t aperture_end;   /* Last address that can be mapped     */
> +	bool force_aperture;       /* DMA only allowed in mappable range? */
> +};
> +
> +

Same here.

[...]

> +
> +/*
> + * Xen: The pgtable_ops are used by the S1 translations, so return the dummy
> + * address.
> + */
> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)

I am slightly confused, on a previous e-mail you suggested that 0x0 is 
not possible to use. The comment in arm_smmu-domain_finalise seems to 
confirm that. So why the 0x0 here?

> +#define free_io_pgtable_ops(o)

Please use do { } while (0)

[...]

> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
>   
>   	dev_info(smmu->dev, "unexpected PRI request received:\n");
>   	dev_info(smmu->dev,
> -		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova 0x%016llx\n",
> +		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova %#" PRIx64 "\n",
>   		 sid, ssid, grpid, last ? "L" : "",
>   		 evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>   		 evt[0] & PRIQ_0_PERM_READ ? "R" : "",
> @@ -1346,6 +1748,8 @@ static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
>   {
>   	arm_smmu_gerror_handler(irq, dev);
>   	arm_smmu_cmdq_sync_handler(irq, dev);
> +	/*Xen: No threaded irq. So call the required function from here */

NIT: /* Xen: ... */

> +	arm_smmu_combined_irq_thread(irq, dev);
>   	return IRQ_WAKE_THREAD;
>   }
>   

[...]

> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
>   	return sid < limit;
>   }
>   
> +/* Xen: Unused */
> +#if 0
>   static struct iommu_ops arm_smmu_ops;
> +#endif
> +
> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
> +static const struct iommu_ops arm_smmu_iommu_ops;
> +#define arm_smmu_ops arm_smmu_iommu_ops

Hmmmmm. Why is that necessary? arm_smmu_iommu_ops is added in this 
patch. So can't you just name the structure arm_smmu_ops?

Furthermore, I would be ok to leave to remove the const as Linux does 
not do it.

>   
>   static int arm_smmu_add_device(struct device *dev)
>   {
> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device *dev)
>   	struct arm_smmu_device *smmu;
>   	struct arm_smmu_master_data *master;
>   	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
> +#if 0 /*Xen: iommu_group is not needed */
>   	struct iommu_group *group;
> +#endif
>   
> +	/* Xen: fwspec->ops are not needed */

You don't change this code. So why this comment?

>   	if (!fwspec || fwspec->ops != &arm_smmu_ops)
>   		return -ENODEV;
>   	/*
> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device *dev)
>   		}
>   	}
>   
> +/*
> + * Xen: Do not need an iommu group as the stream data is carried by the SMMU

NIT: "We don't need...".

> + * master device object

NIT: Missing full stop.

> + */
> +#if 0
>   	group = iommu_group_get_for_dev(dev);
>   	if (!IS_ERR(group)) {
>   		iommu_group_put(group);

[...]

> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
>   		 * Cavium ThunderX2 implementation doesn't not support unique
>   		 * irq lines. Use single irq line for all the SMMUv3 interrupts.
>   		 */
> -		ret = devm_request_threaded_irq(smmu->dev, irq,
> +		/*
> +		 * Xen: Does not support threaded irqs, so serialise the setup.
> +		 * This is the same for pris and event interrupt lines on other
> +		 * systems
> +		 */
> +		ret = devm_request_irq(smmu->dev, irq,
>   					arm_smmu_combined_irq_handler,
> -					arm_smmu_combined_irq_thread,
>   					IRQF_ONESHOT,
>   					"arm-smmu-v3-combined-irq", smmu);

On "RFC v4", I asked a question which was left unanswered. Here the 
conversation:

Me: Above you did implemented a dummy implementation of
     devm_request_threaded_irq(...). So why did you replace the code here?

You: The replacement worked well for other functions, where the handler 
was not defined. So, the wrapper function calls devm_request_irq with 
the argument passed in as thread. In this case really the handler hits 
first and it calls the thread in response. I can modify the code to make 
this fit into the api but in that case I will need to swap around the 
functions so number of line changes will stay the same. Tell me your 
preference.

Me: I don't understand what you mean here. Would it be possible to give 
a concrete example?

>   		if (ret < 0)

[...]

> @@ -2703,7 +3200,7 @@ static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>   				    struct arm_smmu_device *smmu)
>   {
> -	struct device *dev = &pdev->dev;
> +	struct device *dev = pdev;
>   	u32 cells;
>   	int ret = -EINVAL;
>   
> @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>   
>   	parse_driver_options(smmu);
>   
> +	/* Xen: of_dma_is_coherent is a stub till dt support is introduced */
>   	if (of_dma_is_coherent(dev->of_node))

On RFC v4, I requested to move the message on top of of_dma_is_coherent 
stub and add a WARN/WARN_ON(). Please address it.

>   		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>   

[...]

> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>   		if (ret)
>   			return ret;
>   	}
> +#endif
> +	/*
> +	 * Xen: Keep a list of all probed devices. This will be used to query
> +	 * the smmu devices based on the fwnode.
> +	 */
> +	INIT_LIST_HEAD(&smmu->devices);
> +	spin_lock(&arm_smmu_devices_lock);
> +	list_add(&smmu->devices, &arm_smmu_devices);
> +	spin_unlock(&arm_smmu_devices_lock);
>   	return 0;
>   }
>   
> +/* Xen: Unused function */
> +#if 0
>   static int arm_smmu_device_remove(struct platform_device *pdev)
>   {
>   	struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct platform_device *pdev)
>   {
>   	arm_smmu_device_remove(pdev);
>   }
> +#endif
> +

Newline not necessary.

>    >   static const struct of_device_id arm_smmu_of_match[] = {
>   	{ .compatible = "arm,smmu-v3", },

[...]

> diff --git a/xen/include/xen/linux_compat.h b/xen/include/xen/linux_compat.h
> new file mode 100644
> index 0000000000..8037be0a3e
> --- /dev/null
> +++ b/xen/include/xen/linux_compat.h
> @@ -0,0 +1,84 @@
> +/******************************************************************************
> + * include/xen/linux_compat.h
> + *
> + * Compatibility defines for porting code from Linux to Xen
> + *
> + * Copyright (c) 2017 Linaro Limited
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __XEN_LINUX_COMPAT_H__
> +#define __XEN_LINUX_COMPAT_H__
> +
> +#include <asm/types.h>
> +
> +typedef paddr_t phys_addr_t;
> +typedef paddr_t dma_addr_t;
> +
> +typedef unsigned int gfp_t;
> +#define GFP_KERNEL 0
> +#define __GFP_ZERO 0x01U

No need to the hexa here. 1U is much clearer.

> +
> +/* Helpers for IRQ functions */
> +#define free_irq release_irq
> +
> +enum irqreturn {
> +    IRQ_NONE,
> +    IRQ_HANDLED,
> +    IRQ_WAKE_THREAD,
> +};
> +
> +typedef enum irqreturn irqreturn_t;
> +
> +/* Device logger functions */
> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## __VA_ARGS__)
> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## __VA_ARGS__)
> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
> +
> +#define dev_err_ratelimited(dev, fmt, ...)                  \
> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
> +
> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
> +
> +/* Alias to Xen allocation helpers */
> +#define kfree xfree
> +#define kmalloc(size, flags) ({\
> +	void *__ret_alloc = NULL; \
> +	if (flags & __GFP_ZERO) \
> +		__ret_alloc = _xzalloc(size, sizeof(void *)); \

That's Xen code, so please avoid using hard tabs.

> +	else \
> +		__ret_alloc = _xmalloc(size, sizeof(void *)); \
> +	__ret_alloc; \
> +})

Could we make at least kmalloc and kmalloc_array static inline? This 
will add safety and make easier to read (the \ are not indented at all).

> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
> +#define kmalloc_array(size, n, flags) ({\
> +	void *__ret_alloc = NULL; \
> +	if (flags & __GFP_ZERO) \
> +		__ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
> +	else \
> +		__ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
> +	__ret_alloc; \
> +})
> +
> +/* Alias to Xen time functions */
> +#define ktime_t s_time_t
> +#define ktime_get()             (NOW())
> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
> +#define ktime_compare(t,i)      (t > (i))
> +
> +#endif /* __XEN_LINUX_COMPAT_H__ */
> 

Cheers,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Jan Beulich]

>>> On 01.03.18 at 15:07, <julien.grall@arm.com> wrote:
> On 09/02/18 03:10, Sameer Goel wrote:
>> This driver follows an approach similar to smmu driver. The intent here
>> is to reuse as much Linux code as possible.
>> - Glue code has been introduced to bridge the API calls.
>> - Called Linux functions from the Xen IOMMU function calls.
>> - Xen modifications are preceded by /*Xen: comment */
>> - xen/linux_compat: Add a Linux compat header
>>    For porting files directly from Linux it is useful to have a function mapping
>>    definitions from Linux to Xen. This file adds common API functions and
>>    other defines that are needed for porting arm SMMU drivers.
> 
> I understand Roger asked for it, but that was not a really wise choice 
> given the size of this patch. Anyway, let's keep it like that.
> 
>> 
>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>> ---
>>   xen/arch/arm/p2m.c                    |   1 +
>>   xen/drivers/Kconfig                   |   2 +
>>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>>   xen/drivers/passthrough/arm/Makefile  |   1 +
>>   xen/drivers/passthrough/arm/smmu-v3.c | 892 ++++++++++++++++++++++++++++++++--
>>   xen/include/xen/linux_compat.h        |  84 ++++
> 
> You need to CC the REST maintainers for that.

And to be honest, I find adding such disgusting. We've imported
_lots_ of stuff from Linux, yet never needed things like gfp
definitions. I'm far from convinced that converting the new file
in at least some basic aspects to "Xen wording" would complicate
maintaining that file significantly. Headers included at the top
obviously can't use linux/ anyway, so it's never going to be a
verbatim copy.

Jan


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Julien Grall]

Hi Jan,

On 01/03/18 14:21, Jan Beulich wrote:
>>>> On 01.03.18 at 15:07, <julien.grall@arm.com> wrote:
>> On 09/02/18 03:10, Sameer Goel wrote:
>>> This driver follows an approach similar to smmu driver. The intent here
>>> is to reuse as much Linux code as possible.
>>> - Glue code has been introduced to bridge the API calls.
>>> - Called Linux functions from the Xen IOMMU function calls.
>>> - Xen modifications are preceded by /*Xen: comment */
>>> - xen/linux_compat: Add a Linux compat header
>>>     For porting files directly from Linux it is useful to have a function mapping
>>>     definitions from Linux to Xen. This file adds common API functions and
>>>     other defines that are needed for porting arm SMMU drivers.
>>
>> I understand Roger asked for it, but that was not a really wise choice
>> given the size of this patch. Anyway, let's keep it like that.
>>
>>>
>>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>>> ---
>>>    xen/arch/arm/p2m.c                    |   1 +
>>>    xen/drivers/Kconfig                   |   2 +
>>>    xen/drivers/passthrough/arm/Kconfig   |   8 +
>>>    xen/drivers/passthrough/arm/Makefile  |   1 +
>>>    xen/drivers/passthrough/arm/smmu-v3.c | 892 ++++++++++++++++++++++++++++++++--
>>>    xen/include/xen/linux_compat.h        |  84 ++++
>>
>> You need to CC the REST maintainers for that.
> 
> And to be honest, I find adding such disgusting. We've imported
> _lots_ of stuff from Linux, yet never needed things like gfp
> definitions. I'm far from convinced that converting the new file
> in at least some basic aspects to "Xen wording" would complicate
> maintaining that file significantly. Headers included at the top
> obviously can't use linux/ anyway, so it's never going to be a
> verbatim copy.

What Sameer has been doing for SMMUv3 is following the word we did on 
the ARM SMMUv2 driver. The header is a suggestion for consolidating the 
macros over the files here.

Overall I think it makes sense to keep "Linux wording" as much as 
possible because those files are using Linux philosophy. But I would be 
open to suggestion here. So would you mind giving a list of things you 
consider "basic aspects to 'Xen wording'"?

Cheers,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Jan Beulich]

>>> On 01.03.18 at 15:33, <julien.grall@arm.com> wrote:
> What Sameer has been doing for SMMUv3 is following the word we did on 
> the ARM SMMUv2 driver. The header is a suggestion for consolidating the 
> macros over the files here.

In which case - why isn't the patch introducing this compat header
removing the equivalent stuff from that other file. Instead it goes
and introduces the new smmu-v3.c right here. If it was more visible
what code is merely moved, it might be easier to agree to the
introduction.

Otoh this is still all very ARM IOMMU specific - perhaps the header
would then better be local to xen/drivers/passthrough/arm/ (and
you won't see me complain about all this random stuff anymore)?

> Overall I think it makes sense to keep "Linux wording" as much as 
> possible because those files are using Linux philosophy. But I would be 
> open to suggestion here. So would you mind giving a list of things you 
> consider "basic aspects to 'Xen wording'"?

- as already said, anything gfp-ish
- enum irqreturn, and in particular IRQ_WAKE_THREAD, the
  semantics of which surely aren't matched in Xen

Otoh I'm having less of a problem with e.g. dev_printk() and friends
or ktime_t et al, even if I would prefer them to not appear.


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Manish Jaggi]

Hi Sameer,


On 02/09/2018 08:40 AM, Sameer Goel wrote:
> This driver follows an approach similar to smmu driver. The intent here
> is to reuse as much Linux code as possible.
> - Glue code has been introduced to bridge the API calls.
> - Called Linux functions from the Xen IOMMU function calls.
> - Xen modifications are preceded by /*Xen: comment */
> - xen/linux_compat: Add a Linux compat header
>    For porting files directly from Linux it is useful to have a function mapping
>    definitions from Linux to Xen. This file adds common API functions and
>    other defines that are needed for porting arm SMMU drivers.
>
> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
> ---
>   xen/arch/arm/p2m.c                    |   1 +
>   xen/drivers/Kconfig                   |   2 +
>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>   xen/drivers/passthrough/arm/Makefile  |   1 +
>   xen/drivers/passthrough/arm/smmu-v3.c | 892 ++++++++++++++++++++++++++++++++--
>   xen/include/xen/linux_compat.h        |  84 ++++
>   6 files changed, 959 insertions(+), 29 deletions(-)
>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>   create mode 100644 xen/include/xen/linux_compat.h
>
> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
> index 65e8b9c6ea..fef7605fd6 100644
> --- a/xen/arch/arm/p2m.c
> +++ b/xen/arch/arm/p2m.c
> @@ -1460,6 +1460,7 @@ err:
>   static void __init setup_virt_paging_one(void *data)
>   {
>       unsigned long val = (unsigned long)data;
> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>       WRITE_SYSREG32(val, VTCR_EL2);
>       isb();
>   }
> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
> index bc3a54f0ea..612655386d 100644
> --- a/xen/drivers/Kconfig
> +++ b/xen/drivers/Kconfig
> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>   
>   source "drivers/video/Kconfig"
>   
> +source "drivers/passthrough/arm/Kconfig"
> +
>   endmenu
> diff --git a/xen/drivers/passthrough/arm/Kconfig b/xen/drivers/passthrough/arm/Kconfig
> new file mode 100644
> index 0000000000..cda899f608
> --- /dev/null
> +++ b/xen/drivers/passthrough/arm/Kconfig
> @@ -0,0 +1,8 @@
> +
> +config ARM_SMMU_v3
> +	bool "ARM SMMUv3 Support"
> +	depends on ARM_64
> +	help
> +	 Support for implementations of the ARM System MMU architecture
> +	 version 3.
> +
> diff --git a/xen/drivers/passthrough/arm/Makefile b/xen/drivers/passthrough/arm/Makefile
> index f4cd26e15d..e14732b55c 100644
> --- a/xen/drivers/passthrough/arm/Makefile
> +++ b/xen/drivers/passthrough/arm/Makefile
> @@ -1,2 +1,3 @@
>   obj-y += iommu.o
>   obj-y += smmu.o
> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
> index e67ba6c40f..f43485fe6e 100644
> --- a/xen/drivers/passthrough/arm/smmu-v3.c
> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
> @@ -18,28 +18,414 @@
>    * Author: Will Deacon <will.deacon@arm.com>
>    *
>    * This driver is powered by bad coffee and bombay mix.
> + *
> + *
> + * Based on Linux drivers/iommu/arm-smmu-v3.c
> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
> + *
> + * Xen modifications:
> + * Sameer Goel <sameer.goel@linaro.org>
> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
> + *
> + */
> +
> +#include <xen/acpi.h>
> +#include <xen/config.h>
> +#include <xen/delay.h>
> +#include <xen/errno.h>
> +#include <xen/err.h>
> +#include <xen/irq.h>
> +#include <xen/lib.h>
> +#include <xen/linux_compat.h>
> +#include <xen/list.h>
> +#include <xen/mm.h>
> +#include <xen/rbtree.h>
> +#include <xen/sched.h>
> +#include <xen/sizes.h>
> +#include <xen/vmap.h>
> +#include <acpi/acpi_iort.h>
> +#include <asm/atomic.h>
> +#include <asm/device.h>
> +#include <asm/io.h>
> +#include <asm/platform.h>
> +
> +/* Alias to Xen device tree helpers */
> +#define device_node dt_device_node
> +#define of_phandle_args dt_phandle_args
> +#define of_device_id dt_device_match
> +#define of_match_node dt_match_node
> +#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
> +#define of_property_read_bool dt_property_read_bool
> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
> +
> +/* Xen: Helpers to get device MMIO and IRQs */
> +struct resource {
> +	u64 addr;
> +	u64 size;
> +	unsigned int type;
> +};
> +
> +#define resource_size(res) ((res)->size)
> +
> +#define platform_device device
> +
> +#define IORESOURCE_MEM 0
> +#define IORESOURCE_IRQ 1
> +
> +static struct resource *platform_get_resource(struct platform_device *pdev,
> +					      unsigned int type,
> +					      unsigned int num)
> +{
> +	/*
> +	 * The resource is only used between 2 calls of platform_get_resource.
> +	 * It's quite ugly but it's avoid to add too much code in the part
> +	 * imported from Linux
> +	 */
> +	static struct resource res;
> +	struct acpi_iort_node *iort_node;
> +	struct acpi_iort_smmu_v3 *node_smmu_data;
> +	int ret = 0;
> +
> +	res.type = type;
> +
> +	switch (type) {
> +	case IORESOURCE_MEM:
> +		if (pdev->type == DEV_ACPI) {
> +			ret = 1;
> +			iort_node = pdev->acpi_node;
> +			node_smmu_data =
> +				(struct acpi_iort_smmu_v3 *)iort_node->node_data;
> +
> +			if (node_smmu_data != NULL) {
> +				res.addr = node_smmu_data->base_address;
> +				res.size = SZ_128K;
> +				ret = 0;
> +			}
> +		} else {
> +			ret = dt_device_get_address(dev_to_dt(pdev), num,
> +						    &res.addr, &res.size);
> +		}
> +
> +		return ((ret) ? NULL : &res);
> +
> +	case IORESOURCE_IRQ:
> +		/* ACPI case not implemented as there is no use case for it */
> +		ret = platform_get_irq(dev_to_dt(pdev), num);
> +
> +		if (ret < 0)
> +			return NULL;
> +
> +		res.addr = ret;
> +		res.size = 1;
> +
> +		return &res;
> +
> +	default:
> +		return NULL;
> +	}
> +}
> +
> +static int platform_get_irq_byname(struct platform_device *pdev, const char *name)
> +{
> +	const struct dt_property *dtprop;
> +	struct acpi_iort_node *iort_node;
> +	struct acpi_iort_smmu_v3 *node_smmu_data;
> +	int ret = 0;
> +
> +	if (pdev->type == DEV_ACPI) {
> +		iort_node = pdev->acpi_node;
> +		node_smmu_data = (struct acpi_iort_smmu_v3 *)iort_node->node_data;
> +
> +		if (node_smmu_data != NULL) {
> +			if (!strcmp(name, "eventq"))
> +				ret = node_smmu_data->event_gsiv;
> +			else if (!strcmp(name, "priq"))
> +				ret = node_smmu_data->pri_gsiv;
> +			else if (!strcmp(name, "cmdq-sync"))
> +				ret = node_smmu_data->sync_gsiv;
> +			else if (!strcmp(name, "gerror"))
> +				ret = node_smmu_data->gerr_gsiv;
> +			else
> +				ret = -EINVAL;
> +		}
> +	} else {
> +		dtprop = dt_find_property(dev_to_dt(pdev), "interrupt-names", NULL);
> +		if (!dtprop)
> +			return -EINVAL;
> +
> +		if (!dtprop->value)
> +			return -ENODATA;
> +	}
> +
> +	return ret;
> +}
> +
> +/*
> + * Xen: Helpers for DMA allocation. Just the function name is reused for
> + * porting code these allocation are not managed allocations
>    */
>   
> -#include <linux/acpi.h>
> -#include <linux/acpi_iort.h>
> -#include <linux/delay.h>
> -#include <linux/dma-iommu.h>
> -#include <linux/err.h>
> -#include <linux/interrupt.h>
> -#include <linux/iommu.h>
> -#include <linux/iopoll.h>
> -#include <linux/module.h>
> -#include <linux/msi.h>
> -#include <linux/of.h>
> -#include <linux/of_address.h>
> -#include <linux/of_iommu.h>
> -#include <linux/of_platform.h>
> -#include <linux/pci.h>
> -#include <linux/platform_device.h>
> -
> -#include <linux/amba/bus.h>
> -
> -#include "io-pgtable.h"
> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
> +			   dma_addr_t *dma_handle, gfp_t gfp)
> +{
> +	void *vaddr;
> +	unsigned long alignment = size;
> +
> +	/*
> +	 * _xzalloc requires that the (align & (align -1)) = 0. Most of the
> +	 * allocations in SMMU code should send the right value for size. In
> +	 * case this is not true print a warning and align to the size of a
> +	 * (void *)
> +	 */
> +	if (size & (size - 1)) {
> +		dev_warn(dev, "Fixing alignment for the DMA buffer\n");
> +		alignment = sizeof(void *);
> +	}
> +
> +	vaddr = _xzalloc(size, alignment);
> +	if (!vaddr) {
> +		dev_err(dev, "DMA allocation failed\n");
> +		return NULL;
> +	}
> +
> +	*dma_handle = virt_to_maddr(vaddr);
> +
> +	return vaddr;
> +}
> +
> +
> +static void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
> +			dma_addr_t dma_handle)
> +{
> +	xfree(vaddr);
> +}
> +
> +/* Xen: Stub out DMA domain related functions */
> +#define iommu_get_dma_cookie(dom) 0
> +#define iommu_put_dma_cookie(dom)
> +
> +/* Xen: Stub out module param related function */
> +#define module_param_named(a, b, c, d)
> +#define MODULE_PARM_DESC(a, b)
> +
> +#define dma_set_mask_and_coherent(d, b) 0
> +
> +#define of_dma_is_coherent(n) 0
> +
> +#define MODULE_DEVICE_TABLE(type, name)
> +
> +static void __iomem *devm_ioremap_resource(struct device *dev,
> +					   struct resource *res)
> +{
> +	void __iomem *ptr;
> +
> +	if (!res || res->type != IORESOURCE_MEM) {
> +		dev_err(dev, "Invalid resource\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	ptr = ioremap_nocache(res->addr, res->size);
> +	if (!ptr) {
> +		dev_err(dev,
> +			"ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
> +			res->addr, res->size);
> +		return ERR_PTR(-ENOMEM);
> +	}
> +
> +	return ptr;
> +}
> +
> +/* Xen: Compatibility define for iommu_domain_geometry.*/
> +struct iommu_domain_geometry {
> +	dma_addr_t aperture_start; /* First address that can be mapped    */
> +	dma_addr_t aperture_end;   /* Last address that can be mapped     */
> +	bool force_aperture;       /* DMA only allowed in mappable range? */
> +};
> +
> +
> +/* Xen: Type definitions for iommu_domain */
> +#define IOMMU_DOMAIN_UNMANAGED 0
> +#define IOMMU_DOMAIN_DMA 1
> +#define IOMMU_DOMAIN_IDENTITY 2
> +
> +/* Xen: Dummy iommu_domain */
> +struct iommu_domain {
> +	/* Runtime SMMU configuration for this iommu_domain */
> +	struct arm_smmu_domain		*priv;
> +	unsigned int type;
> +
> +	/* Dummy compatibility defines */
> +	unsigned long pgsize_bitmap;
> +	struct iommu_domain_geometry geometry;
> +
> +	atomic_t ref;
> +	/*
> +	 * Used to link iommu_domain contexts for a same domain.
> +	 * There is at least one per-SMMU to used by the domain.
> +	 */
> +	struct list_head		list;
> +};
> +
> +/* Xen: Describes information required for a Xen domain */
> +struct arm_smmu_xen_domain {
> +	spinlock_t			lock;
> +	/* List of iommu domains associated to this domain */
> +	struct list_head		contexts;
> +};
> +
> +/*
> + * Xen: Information about each device stored in dev->archdata.iommu
> + *
> + * The dev->archdata.iommu stores the iommu_domain (runtime configuration of
> + * the SMMU).
> + */
> +struct arm_smmu_xen_device {
> +	struct iommu_domain *domain;
> +};
> +
> +/*
> + * Xen: io_pgtable compatibility defines.
> + * Most of these are to port in the S1 translation code as is.
> + */
> +struct io_pgtable_ops {
> +};
> +
> +struct iommu_gather_ops {
> +	void (*tlb_flush_all)(void *cookie);
> +	void (*tlb_add_flush)(unsigned long iova, size_t size, size_t granule,
> +			      bool leaf, void *cookie);
> +	void (*tlb_sync)(void *cookie);
> +};
> +
> +struct io_pgtable_cfg {
> +	/*
> +	 * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE bits in
> +	 *	stage 1 PTEs, for hardware which insists on validating them
> +	 *	even in	non-secure state where they should normally be ignored.
> +	 *
> +	 * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, IOMMU_WRITE and
> +	 *	IOMMU_NOEXEC flags and map everything with full access, for
> +	 *	hardware which does not implement the permissions of a given
> +	 *	format, and/or requires some format-specific default value.
> +	 *
> +	 * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching invalid
> +	 *	(unmapped) entries but the hardware might do so anyway, perform
> +	 *	TLB maintenance when mapping as well as when unmapping.
> +	 *
> +	 * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
> +	 *	PTEs, for Mediatek IOMMUs which treat it as a 33rd address bit
> +	 *	when the SoC is in "4GB mode" and they can only access the high
> +	 *	remap of DRAM (0x1_00000000 to 0x1_ffffffff).
> +	 *
> +	 * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only ever
> +	 *	be accessed by a fully cache-coherent IOMMU or CPU (e.g. for a
> +	 *	software-emulated IOMMU), such that pagetable updates need not
> +	 *	be treated as explicit DMA data.
> +	 */
> +	#define IO_PGTABLE_QUIRK_ARM_NS		BIT(0)
> +	#define IO_PGTABLE_QUIRK_NO_PERMS	BIT(1)
> +	#define IO_PGTABLE_QUIRK_TLBI_ON_MAP	BIT(2)
> +	#define IO_PGTABLE_QUIRK_ARM_MTK_4GB	BIT(3)
> +	#define IO_PGTABLE_QUIRK_NO_DMA		BIT(4)
> +	unsigned long			quirks;
> +	unsigned long			pgsize_bitmap;
> +	unsigned int			ias;
> +	unsigned int			oas;
> +	const struct iommu_gather_ops	*tlb;
> +	struct device			*iommu_dev;
> +
> +	/* Low-level data specific to the table format */
> +	union {
> +		struct {
> +			u64	ttbr[2];
> +			u64	tcr;
> +			u64	mair[2];
> +		} arm_lpae_s1_cfg;
> +
> +		struct {
> +			u64	vttbr;
> +			u64	vtcr;
> +		} arm_lpae_s2_cfg;
> +
> +		struct {
> +			u32	ttbr[2];
> +			u32	tcr;
> +			u32	nmrr;
> +			u32	prrr;
> +		} arm_v7s_cfg;
> +	};
> +};
> +
> +enum io_pgtable_fmt {
> +	ARM_32_LPAE_S1,
> +	ARM_32_LPAE_S2,
> +	ARM_64_LPAE_S1,
> +	ARM_64_LPAE_S2,
> +	ARM_V7S,
> +	IO_PGTABLE_NUM_FMTS,
> +};
> +
> +/*
> + * Xen: The pgtable_ops are used by the S1 translations, so return the dummy
> + * address.
> + */
> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
Is this correct? it will make the caller null check fail
> +#define free_io_pgtable_ops(o)
> +
> +/* Xen: Define wrapper for requesting IRQs */
> +#define IRQF_ONESHOT 0
> +
> +typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
> +
> +static inline int devm_request_irq(struct device *dev, unsigned int irq,
> +				   irq_handler_t handler, unsigned long irqflags,
> +				   const char *devname, void *dev_id)
> +{
> +	/*
> +	 * SMMUv3 implementation can support wired interrupt outputs that are
> +	 * edge-triggered. Set the irq type as per the spec.
> +	 */
> +	irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
> +	return request_irq(irq, irqflags, handler, devname, dev_id);
> +}
> +
> +/*
> + * Xen does not have a concept of threaded irq, but eventually we can use
> + * tasklets to optimize the following function.
> + */
> +int devm_request_threaded_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
> +			      irq_handler_t thread_fn, unsigned long irqflags,
> +			      const char *devname, void *dev_id)
> +{
> +	return devm_request_irq(dev, irq, thread_fn, irqflags, devname, dev_id);
> +}
> +
> +/* Xen: The mutex is used only during initialization so the typecast is safe */
> +#define mutex spinlock
> +#define mutex_init spin_lock_init
> +#define mutex_lock spin_lock
> +#define mutex_unlock spin_unlock
> +
> +#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
> +({ \
> +	s_time_t deadline = NOW() + MICROSECS(timeout_us); \
> +	for (;;) { \
> +		(val) = op(addr); \
> +		if (cond) \
> +			break; \
> +		if (NOW() > deadline) { \
> +			(val) = op(addr); \
> +			break; \
> +		} \
> +	udelay(sleep_us); \
> +	} \
> +	(cond) ? 0 : -ETIMEDOUT; \
> +})
> +
> +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
> +	readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, timeout_us)
> +
> +#define VA_BITS 0 /* Only needed for S1 translations */
>   
>   /* MMIO registers */
>   #define ARM_SMMU_IDR0			0x0
> @@ -433,6 +819,7 @@ enum pri_resp {
>   	PRI_RESP_SUCC,
>   };
>   
> +#if 0 /* Xen: No MSI support in this iteration */
>   enum arm_smmu_msi_index {
>   	EVTQ_MSI_INDEX,
>   	GERROR_MSI_INDEX,
> @@ -457,6 +844,7 @@ static phys_addr_t arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
>   		ARM_SMMU_PRIQ_IRQ_CFG2,
>   	},
>   };
> +#endif
>   
>   struct arm_smmu_cmdq_ent {
>   	/* Common fields */
> @@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
>   	u16				vmid;
>   	u64				vttbr;
>   	u64				vtcr;
> +	/* Xen: Domain associated to this configuration */
> +	struct domain			*domain;
>   };
>   
>   struct arm_smmu_strtab_ent {
> @@ -635,9 +1025,21 @@ struct arm_smmu_device {
>   	struct arm_smmu_strtab_cfg	strtab_cfg;
>   
>   	/* IOMMU core code handle */
> +#if 0 /*Xen: Generic iommu_device ref not needed here */
>   	struct iommu_device		iommu;
> +#endif
> +	/* Xen: Need to keep a list of SMMU devices */
> +	struct list_head                devices;
>   };
>   
> +/* Xen: Keep a list of devices associated with this driver */
> +static DEFINE_SPINLOCK(arm_smmu_devices_lock);
> +static LIST_HEAD(arm_smmu_devices);
> +/* Xen: Helper for finding a device using fwnode */
> +static
> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode);
> +
> +
>   /* SMMU private data for each master */
>   struct arm_smmu_master_data {
>   	struct arm_smmu_device		*smmu;
> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
>   
>   	dev_info(smmu->dev, "unexpected PRI request received:\n");
>   	dev_info(smmu->dev,
> -		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova 0x%016llx\n",
> +		 "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova %#" PRIx64 "\n",
>   		 sid, ssid, grpid, last ? "L" : "",
>   		 evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>   		 evt[0] & PRIQ_0_PERM_READ ? "R" : "",
> @@ -1346,6 +1748,8 @@ static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
>   {
>   	arm_smmu_gerror_handler(irq, dev);
>   	arm_smmu_cmdq_sync_handler(irq, dev);
> +	/*Xen: No threaded irq. So call the required function from here */
> +	arm_smmu_combined_irq_thread(irq, dev);
>   	return IRQ_WAKE_THREAD;
>   }
>   
> @@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
>   	arm_smmu_cmdq_issue_cmd(smmu, &cmd);
>   }
>   
> +/*
> + * Xen: Define the IRQ handlers for xen. The linux functions would be
> + * modified to use the functions defined in the following code.
> + */
> +static void arm_smmu_evtq_thread_xen(int irq, void *dev,
> +				       struct cpu_user_regs *regs)
> +{
> +	arm_smmu_evtq_thread(irq, dev);
> +}
> +
> +static void arm_smmu_priq_thread_xen(int irq, void *dev,
> +				       struct cpu_user_regs *regs)
> +{
> +	arm_smmu_priq_thread(irq, dev);
> +}
> +
> +static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
> +				       struct cpu_user_regs *regs)
> +{
> +	arm_smmu_cmdq_sync_handler(irq, dev);
> +}
> +
> +static void arm_smmu_gerror_handler_xen(int irq, void *dev,
> +				       struct cpu_user_regs *regs)
> +{
> +	arm_smmu_gerror_handler(irq, dev);
> +}
> +
> +static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
> +				       struct cpu_user_regs *regs)
> +{
> +	arm_smmu_combined_irq_handler(irq, dev);
> +}
> +
> +#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
> +#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
> +#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
> +#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
> +#define arm_smmu_combined_irq_handler arm_smmu_combined_irq_handler_xen
> +
>   static void arm_smmu_tlb_sync(void *cookie)
>   {
>   	struct arm_smmu_domain *smmu_domain = cookie;
> @@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops arm_smmu_gather_ops = {
>   	.tlb_sync	= arm_smmu_tlb_sync,
>   };
>   
> +#if 0 /*Xen: Unused functionality */
>   /* IOMMU API */
>   static bool arm_smmu_capable(enum iommu_cap cap)
>   {
> @@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
>   		return false;
>   	}
>   }
> +#endif
>   
>   static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
>   {
> @@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct arm_smmu_domain *smmu_domain,
>   	if (vmid < 0)
>   		return vmid;
>   
> -	cfg->vmid	= (u16)vmid;
> -	cfg->vttbr	= pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
> -	cfg->vtcr	= pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
> +	/*
> +	 * Xen: Get the ttbr and vtcr values
> +	 * vttbr: This is a shared value with the domain page table
> +	 * vtcr: The TCR settings are the same as CPU since the page
> +	 * tables are shared
> +	 */
> +
> +	cfg->vmid	= vmid;
> +	cfg->vttbr	= page_to_maddr(cfg->domain->arch.p2m.root);
> +	cfg->vtcr	= READ_SYSREG32(VTCR_EL2) & STRTAB_STE_2_VTCR_MASK;
>   	return 0;
>   }
>   
> @@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain)
>   	if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
>   		pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
>   
> +	/* Xen: pgtbl_ops gets an invalid address */
>   	pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
>   	if (!pgtbl_ops)
>   		return -ENOMEM;
Will this not fail ?
> @@ -1721,6 +2175,7 @@ out_unlock:
>   	return ret;
>   }
>   
> +#if 0 /* Xen: Unused functionality */
>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
>   			phys_addr_t paddr, size_t size, int prot)
>   {
> @@ -1772,6 +2227,7 @@ struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>   	put_device(dev);
>   	return dev ? dev_get_drvdata(dev) : NULL;
>   }
> +#endif
>   
>   static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
>   {
> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
>   	return sid < limit;
>   }
>   
> +/* Xen: Unused */
> +#if 0
>   static struct iommu_ops arm_smmu_ops;
> +#endif
> +
> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
> +static const struct iommu_ops arm_smmu_iommu_ops;
> +#define arm_smmu_ops arm_smmu_iommu_ops
>   
>   static int arm_smmu_add_device(struct device *dev)
>   {
> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device *dev)
>   	struct arm_smmu_device *smmu;
>   	struct arm_smmu_master_data *master;
>   	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
> +#if 0 /*Xen: iommu_group is not needed */
>   	struct iommu_group *group;
> +#endif
>   
> +	/* Xen: fwspec->ops are not needed */
>   	if (!fwspec || fwspec->ops != &arm_smmu_ops)
>   		return -ENODEV;
>   	/*
> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device *dev)
>   		}
>   	}
>   
> +/*
> + * Xen: Do not need an iommu group as the stream data is carried by the SMMU
> + * master device object
> + */
> +#if 0
>   	group = iommu_group_get_for_dev(dev);
>   	if (!IS_ERR(group)) {
>   		iommu_group_put(group);
> @@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device *dev)
>   	}
>   
>   	return PTR_ERR_OR_ZERO(group);
> +#endif
> +	return 0;
>   }
>   
> +/*
> + * Xen: We can potentially support this function and destroy a device. This
> + * will be relevant for PCI hotplug. So, will be implemented as needed after
> + * passthrough support is available.
> + */
> +#if 0
>   static void arm_smmu_remove_device(struct device *dev)
>   {
>   	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
> @@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
>   	.put_resv_regions	= arm_smmu_put_resv_regions,
>   	.pgsize_bitmap		= -1UL, /* Restricted during device attach */
>   };
> +#endif
>   
>   /* Probing and initialisation functions */
>   static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
> @@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct arm_smmu_device *smmu, u32 set, u32 clr)
>   					  1, ARM_SMMU_POLL_TIMEOUT_US);
>   }
>   
> +#if 0 /* Xen: There is no MSI support as yet */
>   static void arm_smmu_free_msis(void *data)
>   {
>   	struct device *dev = data;
> @@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
>   	/* Add callback to free MSIs on teardown */
>   	devm_add_action(dev, arm_smmu_free_msis, dev);
>   }
> +#endif
>   
>   static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
>   {
>   	int irq, ret;
>   
> +#if 0 /*Xen: Cannot setup msis for now */
>   	arm_smmu_setup_msis(smmu);
> +#endif
>   
>   	/* Request interrupt lines */
>   	irq = smmu->evtq.q.irq;
> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
>   		 * Cavium ThunderX2 implementation doesn't not support unique
>   		 * irq lines. Use single irq line for all the SMMUv3 interrupts.
>   		 */
> -		ret = devm_request_threaded_irq(smmu->dev, irq,
> +		/*
> +		 * Xen: Does not support threaded irqs, so serialise the setup.
> +		 * This is the same for pris and event interrupt lines on other
> +		 * systems
> +		 */
> +		ret = devm_request_irq(smmu->dev, irq,
>   					arm_smmu_combined_irq_handler,
> -					arm_smmu_combined_irq_thread,
>   					IRQF_ONESHOT,
>   					"arm-smmu-v3-combined-irq", smmu);
>   		if (ret < 0)
> @@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>   		smmu->features |= ARM_SMMU_FEAT_STALLS;
>   	}
>   
> +/*
> + * Xen: Block stage 1 translations. By doing this here we do not need to set the
> + * domain->stage explicitly.
> + */
> +#if 0
>   	if (reg & IDR0_S1P)
>   		smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
> +#endif
>   
>   	if (reg & IDR0_S2P)
>   		smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
> @@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>   	if (reg & IDR5_GRAN4K)
>   		smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
>   
> +#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
>   	if (arm_smmu_ops.pgsize_bitmap == -1UL)
>   		arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
>   	else
>   		arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
> +#endif
>   
>   	/* Output address size */
>   	switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
> @@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
>   	struct device *dev = smmu->dev;
>   	struct acpi_iort_node *node;
>   
> -	node = *(struct acpi_iort_node **)dev_get_platdata(dev);
> +	/* Xen: Modification to get iort_node */
> +	node = (struct acpi_iort_node *)dev->acpi_node;
>   
>   	/* Retrieve SMMUv3 specific data */
>   	iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
> @@ -2703,7 +3200,7 @@ static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>   				    struct arm_smmu_device *smmu)
>   {
> -	struct device *dev = &pdev->dev;
> +	struct device *dev = pdev;
>   	u32 cells;
>   	int ret = -EINVAL;
>   
> @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>   
>   	parse_driver_options(smmu);
>   
> +	/* Xen: of_dma_is_coherent is a stub till dt support is introduced */
>   	if (of_dma_is_coherent(dev->of_node))
>   		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>   
> @@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>   {
>   	int irq, ret;
>   	struct resource *res;
> +#if 0 /*Xen: Do not need to setup sysfs */
>   	resource_size_t ioaddr;
> +#endif
>   	struct arm_smmu_device *smmu;
> -	struct device *dev = &pdev->dev;
> +	struct device *dev = pdev;/* Xen: dev is ignored */
>   	bool bypass;
>   
>   	smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
> @@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>   		dev_err(dev, "MMIO region too small (%pr)\n", res);
>   		return -EINVAL;
>   	}
> +#if 0 /*Xen: Do not need to setup sysfs */
>   	ioaddr = res->start;
> +#endif
>   
>   	smmu->base = devm_ioremap_resource(dev, res);
>   	if (IS_ERR(smmu->base))
> @@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>   		return ret;
>   
>   	/* Record our private device structure */
> +	/* Xen: SMMU is not treated a a platform device*/
> +#if 0
>   	platform_set_drvdata(pdev, smmu);
> +#endif
>   
>   	/* Reset the device */
>   	ret = arm_smmu_device_reset(smmu, bypass);
>   	if (ret)
>   		return ret;
>   
> +/* Xen: Not creating an IOMMU device list for Xen */
> +#if 0
>   	/* And we're up. Go go go! */
>   	ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
>   				     "smmu3.%pa", &ioaddr);
> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>   		if (ret)
>   			return ret;
>   	}
> +#endif
> +	/*
> +	 * Xen: Keep a list of all probed devices. This will be used to query
> +	 * the smmu devices based on the fwnode.
> +	 */
> +	INIT_LIST_HEAD(&smmu->devices);
> +	spin_lock(&arm_smmu_devices_lock);
> +	list_add(&smmu->devices, &arm_smmu_devices);
> +	spin_unlock(&arm_smmu_devices_lock);
>   	return 0;
>   }
>   
> +/* Xen: Unused function */
> +#if 0
>   static int arm_smmu_device_remove(struct platform_device *pdev)
>   {
>   	struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct platform_device *pdev)
>   {
>   	arm_smmu_device_remove(pdev);
>   }
> +#endif
> +
>   
>   static const struct of_device_id arm_smmu_of_match[] = {
>   	{ .compatible = "arm,smmu-v3", },
> @@ -2867,6 +3387,7 @@ static const struct of_device_id arm_smmu_of_match[] = {
>   };
>   MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>   
> +#if 0
>   static struct platform_driver arm_smmu_driver = {
>   	.driver	= {
>   		.name		= "arm-smmu-v3",
> @@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", NULL);
>   MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
>   MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
>   MODULE_LICENSE("GPL v2");
> +#endif
> +
> +/***** Start of Xen specific code *****/
> +
> +static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
> +{
> +	struct arm_smmu_xen_domain *smmu_domain = dom_iommu(d)->arch.priv;
> +	struct iommu_domain *cfg;
> +
> +	spin_lock(&smmu_domain->lock);
> +	list_for_each_entry(cfg, &smmu_domain->contexts, list) {
> +		/*
> +		 * Only invalidate the context when SMMU is present.
> +		 * This is because the context initialization is delayed
> +		 * until a master has been added.
> +		 */
> +		if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
> +			continue;
> +		arm_smmu_tlb_inv_context(cfg->priv);
> +	}
> +	spin_unlock(&smmu_domain->lock);
> +	return 0;
> +}
> +
> +static int __must_check arm_smmu_iotlb_flush(struct domain *d,
> +					     unsigned long gfn,
> +					     unsigned int page_count)
> +{
> +	return arm_smmu_iotlb_flush_all(d);
> +}
> +
> +static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
> +						struct device *dev)
> +{
> +	struct iommu_domain *domain;
> +	struct arm_smmu_xen_domain *xen_domain;
> +	struct arm_smmu_device *smmu;
> +	struct arm_smmu_domain *smmu_domain;
> +
> +	xen_domain = dom_iommu(d)->arch.priv;
> +
> +	smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
> +	if (!smmu)
> +		return NULL;
> +
> +	/*
> +	 * Loop through the &xen_domain->contexts to locate a context
> +	 * assigned to this SMMU
> +	 */
> +	list_for_each_entry(domain, &xen_domain->contexts, list) {
> +		smmu_domain = to_smmu_domain(domain);
> +		if (smmu_domain->smmu == smmu)
> +			return domain;
> +	}
> +
> +	return NULL;
> +}
> +
> +static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
> +{
> +	list_del(&domain->list);
> +	arm_smmu_domain_free(domain);
> +}
> +
> +static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
> +			       struct device *dev, u32 flag)
> +{
> +	int ret = 0;
> +	struct iommu_domain *domain;
> +	struct arm_smmu_xen_domain *xen_domain;
> +	struct arm_smmu_domain *arm_smmu;
> +
> +	xen_domain = dom_iommu(d)->arch.priv;
> +
> +	if (!dev->archdata.iommu) {
> +		dev->archdata.iommu = xzalloc(struct arm_smmu_xen_device);
> +		if (!dev->archdata.iommu)
> +			return -ENOMEM;
> +	}
> +
> +	ret = arm_smmu_add_device(dev);
> +	if (ret)
> +		return ret;
> +
> +	spin_lock(&xen_domain->lock);
> +
> +	/*
> +	 * Check to see if an iommu_domain already exists for this xen domain
> +	 * under the same SMMU
> +	 */
> +	domain = arm_smmu_get_domain(d, dev);
> +	if (!domain) {
> +
> +		domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
> +		if (!domain) {
> +			ret = -ENOMEM;
> +			goto out;
> +		}
> +
> +		arm_smmu = to_smmu_domain(domain);
> +		arm_smmu->s2_cfg.domain = d;
> +
> +		/* Chain the new context to the domain */
> +		list_add(&domain->list, &xen_domain->contexts);
> +
> +	}
> +
> +	ret = arm_smmu_attach_dev(domain, dev);
> +	if (ret) {
> +		if (domain->ref.counter == 0)
> +			arm_smmu_destroy_iommu_domain(domain);
> +	} else {
> +		atomic_inc(&domain->ref);
> +	}
> +
> +out:
> +	spin_unlock(&xen_domain->lock);
> +	return ret;
> +}
> +
> +static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
> +{
> +	struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
> +	struct arm_smmu_xen_domain *xen_domain;
> +	struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
> +
> +	xen_domain = dom_iommu(d)->arch.priv;
> +
> +	if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
> +		dev_err(dev, " not attached to domain %d\n", d->domain_id);
> +		return -ESRCH;
> +	}
> +
> +	spin_lock(&xen_domain->lock);
> +
> +	arm_smmu_detach_dev(dev);
> +	atomic_dec(&domain->ref);
> +
> +	if (domain->ref.counter == 0)
> +		arm_smmu_destroy_iommu_domain(domain);
> +
> +	spin_unlock(&xen_domain->lock);
> +
> +	return 0;
> +}
> +
> +static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
> +				 u8 devfn,  struct device *dev)
> +{
> +	int ret = 0;
> +
> +	/* Don't allow remapping on other domain than hwdom */
> +	if (t && t != hardware_domain)
> +		return -EPERM;
> +
> +	if (t == s)
> +		return 0;
> +
> +	ret = arm_smmu_deassign_dev(s, dev);
> +	if (ret)
> +		return ret;
> +
> +	if (t) {
> +		/* No flags are defined for ARM. */
> +		ret = arm_smmu_assign_dev(t, devfn, dev, 0);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int arm_smmu_iommu_domain_init(struct domain *d)
> +{
> +	struct arm_smmu_xen_domain *xen_domain;
> +
> +	xen_domain = xzalloc(struct arm_smmu_xen_domain);
> +	if (!xen_domain)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&xen_domain->lock);
> +	INIT_LIST_HEAD(&xen_domain->contexts);
> +
> +	dom_iommu(d)->arch.priv = xen_domain;
> +
> +	return 0;
> +}
> +
> +static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
> +{
> +}
> +
> +static void arm_smmu_iommu_domain_teardown(struct domain *d)
> +{
> +	struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
> +
> +	ASSERT(list_empty(&xen_domain->contexts));
> +	xfree(xen_domain);
> +}
> +
> +static int __must_check arm_smmu_map_page(struct domain *d, unsigned long gfn,
> +			unsigned long mfn, unsigned int flags)
> +{
> +	p2m_type_t t;
> +
> +	/*
> +	 * Grant mappings can be used for DMA requests. The dev_bus_addr
> +	 * returned by the hypercall is the MFN (not the IPA). For device
> +	 * protected by an IOMMU, Xen needs to add a 1:1 mapping in the domain
> +	 * p2m to allow DMA request to work.
> +	 * This is only valid when the domain is directed mapped. Hence this
> +	 * function should only be used by gnttab code with gfn == mfn.
> +	 */
> +	BUG_ON(!is_domain_direct_mapped(d));
> +	BUG_ON(mfn != gfn);
> +
> +	/* We only support readable and writable flags */
> +	if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
> +		return -EINVAL;
> +
> +	t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw : p2m_iommu_map_ro;
> +
> +	/*
> +	 * The function guest_physmap_add_entry replaces the current mapping
> +	 * if there is already one...
> +	 */
> +	return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
> +}
> +
> +static int __must_check arm_smmu_unmap_page(struct domain *d, unsigned long gfn)
> +{
> +	/*
> +	 * This function should only be used by gnttab code when the domain
> +	 * is direct mapped
> +	 */
> +	if (!is_domain_direct_mapped(d))
> +		return -EINVAL;
> +
> +	return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
> +}
> +
> +static const struct iommu_ops arm_smmu_iommu_ops = {
> +	.init = arm_smmu_iommu_domain_init,
> +	.hwdom_init = arm_smmu_iommu_hwdom_init,
> +	.teardown = arm_smmu_iommu_domain_teardown,
> +	.iotlb_flush = arm_smmu_iotlb_flush,
> +	.iotlb_flush_all = arm_smmu_iotlb_flush_all,
> +	.assign_device = arm_smmu_assign_dev,
> +	.reassign_device = arm_smmu_reassign_dev,
> +	.map_page = arm_smmu_map_page,
> +	.unmap_page = arm_smmu_unmap_page,
> +};
> +
> +static
> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
> +{
> +	struct arm_smmu_device *smmu = NULL;
> +
> +	spin_lock(&arm_smmu_devices_lock);
> +	list_for_each_entry(smmu, &arm_smmu_devices, devices) {
> +		if (smmu->dev->fwnode == fwnode)
> +			break;
> +	}
> +	spin_unlock(&arm_smmu_devices_lock);
> +
> +	return smmu;
> +}
> +
> +static __init int arm_smmu_dt_init(struct dt_device_node *dev,
> +				   const void *data)
> +{
> +	int rc;
> +
> +	/*
> +	 * Even if the device can't be initialized, we don't want to
> +	 * give the SMMU device to dom0.
> +	 */
> +	dt_device_set_used_by(dev, DOMID_XEN);
> +
> +	rc = arm_smmu_device_probe(dt_to_dev(dev));
> +	if (rc)
> +		return rc;
> +
> +	iommu_set_ops(&arm_smmu_iommu_ops);
> +
> +	return 0;
> +}
> +
> +DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
> +	.dt_match = arm_smmu_of_match,
> +	.init = arm_smmu_dt_init,
> +DT_DEVICE_END
> +
> +#ifdef CONFIG_ACPI
> +/* Set up the IOMMU */
> +static int __init arm_smmu_acpi_init(const void *data)
> +{
> +	int rc;
> +
> +	rc = arm_smmu_device_probe((struct device *)data);
> +	if (rc)
> +		return rc;
> +
> +	iommu_set_ops(&arm_smmu_iommu_ops);
> +	return 0;
> +}
> +
> +ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
> +	.class_type = ACPI_IORT_NODE_SMMU_V3,
> +	.init = arm_smmu_acpi_init,
> +ACPI_DEVICE_END
> +
> +#endif
> diff --git a/xen/include/xen/linux_compat.h b/xen/include/xen/linux_compat.h
> new file mode 100644
> index 0000000000..8037be0a3e
> --- /dev/null
> +++ b/xen/include/xen/linux_compat.h
> @@ -0,0 +1,84 @@
> +/******************************************************************************
> + * include/xen/linux_compat.h
> + *
> + * Compatibility defines for porting code from Linux to Xen
> + *
> + * Copyright (c) 2017 Linaro Limited
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __XEN_LINUX_COMPAT_H__
> +#define __XEN_LINUX_COMPAT_H__
> +
> +#include <asm/types.h>
> +
> +typedef paddr_t phys_addr_t;
> +typedef paddr_t dma_addr_t;
> +
> +typedef unsigned int gfp_t;
> +#define GFP_KERNEL 0
> +#define __GFP_ZERO 0x01U
> +
> +/* Helpers for IRQ functions */
> +#define free_irq release_irq
> +
> +enum irqreturn {
> +    IRQ_NONE,
> +    IRQ_HANDLED,
> +    IRQ_WAKE_THREAD,
> +};
> +
> +typedef enum irqreturn irqreturn_t;
> +
> +/* Device logger functions */
> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## __VA_ARGS__)
> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## __VA_ARGS__)
> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
> +
> +#define dev_err_ratelimited(dev, fmt, ...)                  \
> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
> +
> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
> +
> +/* Alias to Xen allocation helpers */
> +#define kfree xfree
> +#define kmalloc(size, flags) ({\
> +	void *__ret_alloc = NULL; \
> +	if (flags & __GFP_ZERO) \
> +		__ret_alloc = _xzalloc(size, sizeof(void *)); \
> +	else \
> +		__ret_alloc = _xmalloc(size, sizeof(void *)); \
> +	__ret_alloc; \
> +})
> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
> +#define kmalloc_array(size, n, flags) ({\
> +	void *__ret_alloc = NULL; \
> +	if (flags & __GFP_ZERO) \
> +		__ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
> +	else \
> +		__ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
> +	__ret_alloc; \
> +})
> +
> +/* Alias to Xen time functions */
> +#define ktime_t s_time_t
> +#define ktime_get()             (NOW())
> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
> +#define ktime_compare(t,i)      (t > (i))
> +
> +#endif /* __XEN_LINUX_COMPAT_H__ */


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Manish Jaggi]

[-- Attachment #1.1: Type: text/plain, Size: 48679 bytes --]

On 10 March 2018 at 23:23, Manish Jaggi <mjaggi@caviumnetworks.com> wrote:
> Hi Sameer,
>
>
>
> On 02/09/2018 08:40 AM, Sameer Goel wrote:
>>
>> This driver follows an approach similar to smmu driver. The intent here
>> is to reuse as much Linux code as possible.
>> - Glue code has been introduced to bridge the API calls.
>> - Called Linux functions from the Xen IOMMU function calls.
>> - Xen modifications are preceded by /*Xen: comment */
>> - xen/linux_compat: Add a Linux compat header
>>    For porting files directly from Linux it is useful to have a function
>> mapping
>>    definitions from Linux to Xen. This file adds common API functions and
>>    other defines that are needed for porting arm SMMU drivers.
>>
>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>> ---
>>   xen/arch/arm/p2m.c                    |   1 +
>>   xen/drivers/Kconfig                   |   2 +
>>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>>   xen/drivers/passthrough/arm/Makefile  |   1 +
>>   xen/drivers/passthrough/arm/smmu-v3.c | 892
>> ++++++++++++++++++++++++++++++++--
>>   xen/include/xen/linux_compat.h        |  84 ++++
>>   6 files changed, 959 insertions(+), 29 deletions(-)
>>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>>   create mode 100644 xen/include/xen/linux_compat.h
>>
>> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
>> index 65e8b9c6ea..fef7605fd6 100644
>> --- a/xen/arch/arm/p2m.c
>> +++ b/xen/arch/arm/p2m.c
>> @@ -1460,6 +1460,7 @@ err:
>>   static void __init setup_virt_paging_one(void *data)
>>   {
>>       unsigned long val = (unsigned long)data;
>> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>>       WRITE_SYSREG32(val, VTCR_EL2);
>>       isb();
>>   }
>> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
>> index bc3a54f0ea..612655386d 100644
>> --- a/xen/drivers/Kconfig
>> +++ b/xen/drivers/Kconfig
>> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>>     source "drivers/video/Kconfig"
>>   +source "drivers/passthrough/arm/Kconfig"
>> +
>>   endmenu
>> diff --git a/xen/drivers/passthrough/arm/Kconfig
>> b/xen/drivers/passthrough/arm/Kconfig
>> new file mode 100644
>> index 0000000000..cda899f608
>> --- /dev/null
>> +++ b/xen/drivers/passthrough/arm/Kconfig
>> @@ -0,0 +1,8 @@
>> +
>> +config ARM_SMMU_v3
>> +       bool "ARM SMMUv3 Support"
>> +       depends on ARM_64
>> +       help
>> +        Support for implementations of the ARM System MMU architecture
>> +        version 3.
>> +
>> diff --git a/xen/drivers/passthrough/arm/Makefile
>> b/xen/drivers/passthrough/arm/Makefile
>> index f4cd26e15d..e14732b55c 100644
>> --- a/xen/drivers/passthrough/arm/Makefile
>> +++ b/xen/drivers/passthrough/arm/Makefile
>> @@ -1,2 +1,3 @@
>>   obj-y += iommu.o
>>   obj-y += smmu.o
>> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c
>> b/xen/drivers/passthrough/arm/smmu-v3.c
>> index e67ba6c40f..f43485fe6e 100644
>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>> @@ -18,28 +18,414 @@
>>    * Author: Will Deacon <will.deacon@arm.com>
>>    *
>>    * This driver is powered by bad coffee and bombay mix.
>> + *
>> + *
>> + * Based on Linux drivers/iommu/arm-smmu-v3.c
>> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
>> + *
>> + * Xen modifications:
>> + * Sameer Goel <sameer.goel@linaro.org>
>> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
>> + *
>> + */
>> +
>> +#include <xen/acpi.h>
>> +#include <xen/config.h>
>> +#include <xen/delay.h>
>> +#include <xen/errno.h>
>> +#include <xen/err.h>
>> +#include <xen/irq.h>
>> +#include <xen/lib.h>
>> +#include <xen/linux_compat.h>
>> +#include <xen/list.h>
>> +#include <xen/mm.h>
>> +#include <xen/rbtree.h>
>> +#include <xen/sched.h>
>> +#include <xen/sizes.h>
>> +#include <xen/vmap.h>
>> +#include <acpi/acpi_iort.h>
>> +#include <asm/atomic.h>
>> +#include <asm/device.h>
>> +#include <asm/io.h>
>> +#include <asm/platform.h>
>> +
>> +/* Alias to Xen device tree helpers */
>> +#define device_node dt_device_node
>> +#define of_phandle_args dt_phandle_args
>> +#define of_device_id dt_device_match
>> +#define of_match_node dt_match_node
>> +#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np,
>> pname, out))
>> +#define of_property_read_bool dt_property_read_bool
>> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
>> +
>> +/* Xen: Helpers to get device MMIO and IRQs */
>> +struct resource {
>> +       u64 addr;
>> +       u64 size;
>> +       unsigned int type;
>> +};
>> +
>> +#define resource_size(res) ((res)->size)
>> +
>> +#define platform_device device
>> +
>> +#define IORESOURCE_MEM 0
>> +#define IORESOURCE_IRQ 1
>> +
>> +static struct resource *platform_get_resource(struct platform_device
>> *pdev,
>> +                                             unsigned int type,
>> +                                             unsigned int num)
>> +{
>> +       /*
>> +        * The resource is only used between 2 calls of
>> platform_get_resource.
>> +        * It's quite ugly but it's avoid to add too much code in the
part
>> +        * imported from Linux
>> +        */
>> +       static struct resource res;
>> +       struct acpi_iort_node *iort_node;
>> +       struct acpi_iort_smmu_v3 *node_smmu_data;
>> +       int ret = 0;
>> +
>> +       res.type = type;
>> +
>> +       switch (type) {
>> +       case IORESOURCE_MEM:
>> +               if (pdev->type == DEV_ACPI) {
>> +                       ret = 1;
>> +                       iort_node = pdev->acpi_node;
>> +                       node_smmu_data =
>> +                               (struct acpi_iort_smmu_v3
>> *)iort_node->node_data;
>> +
>> +                       if (node_smmu_data != NULL) {
>> +                               res.addr = node_smmu_data->base_address;
>> +                               res.size = SZ_128K;
>> +                               ret = 0;
>> +                       }
>> +               } else {
>> +                       ret = dt_device_get_address(dev_to_dt(pdev), num,
>> +                                                   &res.addr,
&res.size);
>> +               }
>> +
>> +               return ((ret) ? NULL : &res);
>> +
>> +       case IORESOURCE_IRQ:
>> +               /* ACPI case not implemented as there is no use case for
>> it */
>> +               ret = platform_get_irq(dev_to_dt(pdev), num);
>> +
>> +               if (ret < 0)
>> +                       return NULL;
>> +
>> +               res.addr = ret;
>> +               res.size = 1;
>> +
>> +               return &res;
>> +
>> +       default:
>> +               return NULL;
>> +       }
>> +}
>> +
>> +static int platform_get_irq_byname(struct platform_device *pdev, const
>> char *name)
>> +{
>> +       const struct dt_property *dtprop;
>> +       struct acpi_iort_node *iort_node;
>> +       struct acpi_iort_smmu_v3 *node_smmu_data;
>> +       int ret = 0;
>> +
>> +       if (pdev->type == DEV_ACPI) {
>> +               iort_node = pdev->acpi_node;
>> +               node_smmu_data = (struct acpi_iort_smmu_v3
>> *)iort_node->node_data;
>> +
>> +               if (node_smmu_data != NULL) {
>> +                       if (!strcmp(name, "eventq"))
>> +                               ret = node_smmu_data->event_gsiv;
>> +                       else if (!strcmp(name, "priq"))
>> +                               ret = node_smmu_data->pri_gsiv;
>> +                       else if (!strcmp(name, "cmdq-sync"))
>> +                               ret = node_smmu_data->sync_gsiv;
>> +                       else if (!strcmp(name, "gerror"))
>> +                               ret = node_smmu_data->gerr_gsiv;
>> +                       else
>> +                               ret = -EINVAL;
>> +               }
>> +       } else {
>> +               dtprop = dt_find_property(dev_to_dt(pdev),
>> "interrupt-names", NULL);
>> +               if (!dtprop)
>> +                       return -EINVAL;
>> +
>> +               if (!dtprop->value)
>> +                       return -ENODATA;
>> +       }
>> +
>> +       return ret;
>> +}
>> +
>> +/*
>> + * Xen: Helpers for DMA allocation. Just the function name is reused for
>> + * porting code these allocation are not managed allocations
>>    */
>>   -#include <linux/acpi.h>
>> -#include <linux/acpi_iort.h>
>> -#include <linux/delay.h>
>> -#include <linux/dma-iommu.h>
>> -#include <linux/err.h>
>> -#include <linux/interrupt.h>
>> -#include <linux/iommu.h>
>> -#include <linux/iopoll.h>
>> -#include <linux/module.h>
>> -#include <linux/msi.h>
>> -#include <linux/of.h>
>> -#include <linux/of_address.h>
>> -#include <linux/of_iommu.h>
>> -#include <linux/of_platform.h>
>> -#include <linux/pci.h>
>> -#include <linux/platform_device.h>
>> -
>> -#include <linux/amba/bus.h>
>> -
>> -#include "io-pgtable.h"
>> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
>> +                          dma_addr_t *dma_handle, gfp_t gfp)
>> +{
>> +       void *vaddr;
>> +       unsigned long alignment = size;
>> +
>> +       /*
>> +        * _xzalloc requires that the (align & (align -1)) = 0. Most of
>> the
>> +        * allocations in SMMU code should send the right value for size.
>> In
>> +        * case this is not true print a warning and align to the size of
>> a
>> +        * (void *)
>> +        */
>> +       if (size & (size - 1)) {
>> +               dev_warn(dev, "Fixing alignment for the DMA buffer\n");
>> +               alignment = sizeof(void *);
>> +       }
>> +
>> +       vaddr = _xzalloc(size, alignment);
>> +       if (!vaddr) {
>> +               dev_err(dev, "DMA allocation failed\n");
>> +               return NULL;
>> +       }
>> +
>> +       *dma_handle = virt_to_maddr(vaddr);
>> +
>> +       return vaddr;
>> +}
>> +
>> +
>> +static void dmam_free_coherent(struct device *dev, size_t size, void
>> *vaddr,
>> +                       dma_addr_t dma_handle)
>> +{
>> +       xfree(vaddr);
>> +}
>> +
>> +/* Xen: Stub out DMA domain related functions */
>> +#define iommu_get_dma_cookie(dom) 0
>> +#define iommu_put_dma_cookie(dom)
>> +
>> +/* Xen: Stub out module param related function */
>> +#define module_param_named(a, b, c, d)
>> +#define MODULE_PARM_DESC(a, b)
>> +
>> +#define dma_set_mask_and_coherent(d, b) 0
>> +
>> +#define of_dma_is_coherent(n) 0
>> +
>> +#define MODULE_DEVICE_TABLE(type, name)
>> +
>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>> +                                          struct resource *res)
>> +{
>> +       void __iomem *ptr;
>> +
>> +       if (!res || res->type != IORESOURCE_MEM) {
>> +               dev_err(dev, "Invalid resource\n");
>> +               return ERR_PTR(-EINVAL);
>> +       }
>> +
>> +       ptr = ioremap_nocache(res->addr, res->size);
>> +       if (!ptr) {
>> +               dev_err(dev,
>> +                       "ioremap failed (addr 0x%"PRIx64" size
>> 0x%"PRIx64")\n",
>> +                       res->addr, res->size);
>> +               return ERR_PTR(-ENOMEM);
>> +       }
>> +
>> +       return ptr;
>> +}
>> +
>> +/* Xen: Compatibility define for iommu_domain_geometry.*/
>> +struct iommu_domain_geometry {
>> +       dma_addr_t aperture_start; /* First address that can be mapped
>> */
>> +       dma_addr_t aperture_end;   /* Last address that can be mapped
>> */
>> +       bool force_aperture;       /* DMA only allowed in mappable range?
>> */
>> +};
>> +
>> +
>> +/* Xen: Type definitions for iommu_domain */
>> +#define IOMMU_DOMAIN_UNMANAGED 0
>> +#define IOMMU_DOMAIN_DMA 1
>> +#define IOMMU_DOMAIN_IDENTITY 2
>> +
>> +/* Xen: Dummy iommu_domain */
>> +struct iommu_domain {
>> +       /* Runtime SMMU configuration for this iommu_domain */
>> +       struct arm_smmu_domain          *priv;
>> +       unsigned int type;
>> +
>> +       /* Dummy compatibility defines */
>> +       unsigned long pgsize_bitmap;
>> +       struct iommu_domain_geometry geometry;
>> +
>> +       atomic_t ref;
>> +       /*
>> +        * Used to link iommu_domain contexts for a same domain.
>> +        * There is at least one per-SMMU to used by the domain.
>> +        */
>> +       struct list_head                list;
>> +};
>> +
>> +/* Xen: Describes information required for a Xen domain */
>> +struct arm_smmu_xen_domain {
>> +       spinlock_t                      lock;
>> +       /* List of iommu domains associated to this domain */
>> +       struct list_head                contexts;
>> +};
>> +
>> +/*
>> + * Xen: Information about each device stored in dev->archdata.iommu
>> + *
>> + * The dev->archdata.iommu stores the iommu_domain (runtime
configuration
>> of
>> + * the SMMU).
>> + */
>> +struct arm_smmu_xen_device {
>> +       struct iommu_domain *domain;
>> +};
>> +
>> +/*
>> + * Xen: io_pgtable compatibility defines.
>> + * Most of these are to port in the S1 translation code as is.
>> + */
>> +struct io_pgtable_ops {
>> +};
>> +
>> +struct iommu_gather_ops {
>> +       void (*tlb_flush_all)(void *cookie);
>> +       void (*tlb_add_flush)(unsigned long iova, size_t size, size_t
>> granule,
>> +                             bool leaf, void *cookie);
>> +       void (*tlb_sync)(void *cookie);
>> +};
>> +
>> +struct io_pgtable_cfg {
>> +       /*
>> +        * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE bits
>> in
>> +        *      stage 1 PTEs, for hardware which insists on validating
>> them
>> +        *      even in non-secure state where they should normally be
>> ignored.
>> +        *
>> +        * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, IOMMU_WRITE
>> and
>> +        *      IOMMU_NOEXEC flags and map everything with full access,
>> for
>> +        *      hardware which does not implement the permissions of a
>> given
>> +        *      format, and/or requires some format-specific default
>> value.
>> +        *
>> +        * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching
>> invalid
>> +        *      (unmapped) entries but the hardware might do so anyway,
>> perform
>> +        *      TLB maintenance when mapping as well as when unmapping.
>> +        *
>> +        * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in
all
>> +        *      PTEs, for Mediatek IOMMUs which treat it as a 33rd
address
>> bit
>> +        *      when the SoC is in "4GB mode" and they can only access
the
>> high
>> +        *      remap of DRAM (0x1_00000000 to 0x1_ffffffff).
>> +        *
>> +        * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only
>> ever
>> +        *      be accessed by a fully cache-coherent IOMMU or CPU (e.g.
>> for a
>> +        *      software-emulated IOMMU), such that pagetable updates
need
>> not
>> +        *      be treated as explicit DMA data.
>> +        */
>> +       #define IO_PGTABLE_QUIRK_ARM_NS         BIT(0)
>> +       #define IO_PGTABLE_QUIRK_NO_PERMS       BIT(1)
>> +       #define IO_PGTABLE_QUIRK_TLBI_ON_MAP    BIT(2)
>> +       #define IO_PGTABLE_QUIRK_ARM_MTK_4GB    BIT(3)
>> +       #define IO_PGTABLE_QUIRK_NO_DMA         BIT(4)
>> +       unsigned long                   quirks;
>> +       unsigned long                   pgsize_bitmap;
>> +       unsigned int                    ias;
>> +       unsigned int                    oas;
>> +       const struct iommu_gather_ops   *tlb;
>> +       struct device                   *iommu_dev;
>> +
>> +       /* Low-level data specific to the table format */
>> +       union {
>> +               struct {
>> +                       u64     ttbr[2];
>> +                       u64     tcr;
>> +                       u64     mair[2];
>> +               } arm_lpae_s1_cfg;
>> +
>> +               struct {
>> +                       u64     vttbr;
>> +                       u64     vtcr;
>> +               } arm_lpae_s2_cfg;
>> +
>> +               struct {
>> +                       u32     ttbr[2];
>> +                       u32     tcr;
>> +                       u32     nmrr;
>> +                       u32     prrr;
>> +               } arm_v7s_cfg;
>> +       };
>> +};
>> +
>> +enum io_pgtable_fmt {
>> +       ARM_32_LPAE_S1,
>> +       ARM_32_LPAE_S2,
>> +       ARM_64_LPAE_S1,
>> +       ARM_64_LPAE_S2,
>> +       ARM_V7S,
>> +       IO_PGTABLE_NUM_FMTS,
>> +};
>> +
>> +/*
>> + * Xen: The pgtable_ops are used by the S1 translations, so return the
>> dummy
>> + * address.
>> + */
>> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
>
> Is this correct? it will make the caller null check fail
In your earlier patch it was

#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0xDEADBEEF)

>
>> +#define free_io_pgtable_ops(o)
>> +
>> +/* Xen: Define wrapper for requesting IRQs */
>> +#define IRQF_ONESHOT 0
>> +
>> +typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
>> +
>> +static inline int devm_request_irq(struct device *dev, unsigned int irq,
>> +                                  irq_handler_t handler, unsigned long
>> irqflags,
>> +                                  const char *devname, void *dev_id)
>> +{
>> +       /*
>> +        * SMMUv3 implementation can support wired interrupt outputs that
>> are
>> +        * edge-triggered. Set the irq type as per the spec.
>> +        */
>> +       irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
>> +       return request_irq(irq, irqflags, handler, devname, dev_id);
>> +}
>> +
>> +/*
>> + * Xen does not have a concept of threaded irq, but eventually we can
use
>> + * tasklets to optimize the following function.
>> + */
>> +int devm_request_threaded_irq(struct device *dev, unsigned int irq,
>> irq_handler_t handler,
>> +                             irq_handler_t thread_fn, unsigned long
>> irqflags,
>> +                             const char *devname, void *dev_id)
>> +{
>> +       return devm_request_irq(dev, irq, thread_fn, irqflags, devname,
>> dev_id);
>> +}
>> +
>> +/* Xen: The mutex is used only during initialization so the typecast is
>> safe */
>> +#define mutex spinlock
>> +#define mutex_init spin_lock_init
>> +#define mutex_lock spin_lock
>> +#define mutex_unlock spin_unlock
>> +
>> +#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
>> +({ \
>> +       s_time_t deadline = NOW() + MICROSECS(timeout_us); \
>> +       for (;;) { \
>> +               (val) = op(addr); \
>> +               if (cond) \
>> +                       break; \
>> +               if (NOW() > deadline) { \
>> +                       (val) = op(addr); \
>> +                       break; \
>> +               } \
>> +       udelay(sleep_us); \
>> +       } \
>> +       (cond) ? 0 : -ETIMEDOUT; \
>> +})
>> +
>> +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us,
timeout_us)
>> \
>> +       readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us,
>> timeout_us)
>> +
>> +#define VA_BITS 0 /* Only needed for S1 translations */
>>     /* MMIO registers */
>>   #define ARM_SMMU_IDR0                 0x0
>> @@ -433,6 +819,7 @@ enum pri_resp {
>>         PRI_RESP_SUCC,
>>   };
>>   +#if 0 /* Xen: No MSI support in this iteration */
>>   enum arm_smmu_msi_index {
>>         EVTQ_MSI_INDEX,
>>         GERROR_MSI_INDEX,
>> @@ -457,6 +844,7 @@ static phys_addr_t
>> arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
>>                 ARM_SMMU_PRIQ_IRQ_CFG2,
>>         },
>>   };
>> +#endif
>>     struct arm_smmu_cmdq_ent {
>>         /* Common fields */
>> @@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
>>         u16                             vmid;
>>         u64                             vttbr;
>>         u64                             vtcr;
>> +       /* Xen: Domain associated to this configuration */
>> +       struct domain                   *domain;
>>   };
>>     struct arm_smmu_strtab_ent {
>> @@ -635,9 +1025,21 @@ struct arm_smmu_device {
>>         struct arm_smmu_strtab_cfg      strtab_cfg;
>>         /* IOMMU core code handle */
>> +#if 0 /*Xen: Generic iommu_device ref not needed here */
>>         struct iommu_device             iommu;
>> +#endif
>> +       /* Xen: Need to keep a list of SMMU devices */
>> +       struct list_head                devices;
>>   };
>>   +/* Xen: Keep a list of devices associated with this driver */
>> +static DEFINE_SPINLOCK(arm_smmu_devices_lock);
>> +static LIST_HEAD(arm_smmu_devices);
>> +/* Xen: Helper for finding a device using fwnode */
>> +static
>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle
>> *fwnode);
>> +
>> +
>>   /* SMMU private data for each master */
>>   struct arm_smmu_master_data {
>>         struct arm_smmu_device          *smmu;
>> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct
>> arm_smmu_device *smmu, u64 *evt)
>>         dev_info(smmu->dev, "unexpected PRI request received:\n");
>>         dev_info(smmu->dev,
>> -                "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access
>> at iova 0x%016llx\n",
>> +                "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access
>> at iova %#" PRIx64 "\n",
>>                  sid, ssid, grpid, last ? "L" : "",
>>                  evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>>                  evt[0] & PRIQ_0_PERM_READ ? "R" : "",
>> @@ -1346,6 +1748,8 @@ static irqreturn_t
arm_smmu_combined_irq_handler(int
>> irq, void *dev)
>>   {
>>         arm_smmu_gerror_handler(irq, dev);
>>         arm_smmu_cmdq_sync_handler(irq, dev);
>> +       /*Xen: No threaded irq. So call the required function from here
*/
>> +       arm_smmu_combined_irq_thread(irq, dev);
>>         return IRQ_WAKE_THREAD;
>>   }
>>   @@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct
>> arm_smmu_device *smmu)
>>         arm_smmu_cmdq_issue_cmd(smmu, &cmd);
>>   }
>>   +/*
>> + * Xen: Define the IRQ handlers for xen. The linux functions would be
>> + * modified to use the functions defined in the following code.
>> + */
>> +static void arm_smmu_evtq_thread_xen(int irq, void *dev,
>> +                                      struct cpu_user_regs *regs)
>> +{
>> +       arm_smmu_evtq_thread(irq, dev);
>> +}
>> +
>> +static void arm_smmu_priq_thread_xen(int irq, void *dev,
>> +                                      struct cpu_user_regs *regs)
>> +{
>> +       arm_smmu_priq_thread(irq, dev);
>> +}
>> +
>> +static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
>> +                                      struct cpu_user_regs *regs)
>> +{
>> +       arm_smmu_cmdq_sync_handler(irq, dev);
>> +}
>> +
>> +static void arm_smmu_gerror_handler_xen(int irq, void *dev,
>> +                                      struct cpu_user_regs *regs)
>> +{
>> +       arm_smmu_gerror_handler(irq, dev);
>> +}
>> +
>> +static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
>> +                                      struct cpu_user_regs *regs)
>> +{
>> +       arm_smmu_combined_irq_handler(irq, dev);
>> +}
>> +
>> +#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
>> +#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
>> +#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
>> +#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
>> +#define arm_smmu_combined_irq_handler arm_smmu_combined_irq_handler_xen
>> +
>>   static void arm_smmu_tlb_sync(void *cookie)
>>   {
>>         struct arm_smmu_domain *smmu_domain = cookie;
>> @@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops
>> arm_smmu_gather_ops = {
>>         .tlb_sync       = arm_smmu_tlb_sync,
>>   };
>>   +#if 0 /*Xen: Unused functionality */
>>   /* IOMMU API */
>>   static bool arm_smmu_capable(enum iommu_cap cap)
>>   {
>> @@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
>>                 return false;
>>         }
>>   }
>> +#endif
>>     static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
>>   {
>> @@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct
>> arm_smmu_domain *smmu_domain,
>>         if (vmid < 0)
>>                 return vmid;
>>   -     cfg->vmid       = (u16)vmid;
>> -       cfg->vttbr      = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
>> -       cfg->vtcr       = pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
>> +       /*
>> +        * Xen: Get the ttbr and vtcr values
>> +        * vttbr: This is a shared value with the domain page table
>> +        * vtcr: The TCR settings are the same as CPU since the page
>> +        * tables are shared
>> +        */
>> +
>> +       cfg->vmid       = vmid;
>> +       cfg->vttbr      = page_to_maddr(cfg->domain->arch.p2m.root);
>> +       cfg->vtcr       = READ_SYSREG32(VTCR_EL2) &
>> STRTAB_STE_2_VTCR_MASK;
>>         return 0;
>>   }
>>   @@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct
>> iommu_domain *domain)
>>         if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
>>                 pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
>>   +     /* Xen: pgtbl_ops gets an invalid address */
>>         pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
>>         if (!pgtbl_ops)
>>                 return -ENOMEM;
>
> Will this not fail ?
>
>> @@ -1721,6 +2175,7 @@ out_unlock:
>>         return ret;
>>   }
>>   +#if 0 /* Xen: Unused functionality */
>>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long
iova,
>>                         phys_addr_t paddr, size_t size, int prot)
>>   {
>> @@ -1772,6 +2227,7 @@ struct arm_smmu_device
>> *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>>         put_device(dev);
>>         return dev ? dev_get_drvdata(dev) : NULL;
>>   }
>> +#endif
>>     static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32
>> sid)
>>   {
>> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct
>> arm_smmu_device *smmu, u32 sid)
>>         return sid < limit;
>>   }
>>   +/* Xen: Unused */
>> +#if 0
>>   static struct iommu_ops arm_smmu_ops;
>> +#endif
>> +
>> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
>> +static const struct iommu_ops arm_smmu_iommu_ops;
>> +#define arm_smmu_ops arm_smmu_iommu_ops
>>     static int arm_smmu_add_device(struct device *dev)
>>   {
>> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device *dev)
>>         struct arm_smmu_device *smmu;
>>         struct arm_smmu_master_data *master;
>>         struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>> +#if 0 /*Xen: iommu_group is not needed */
>>         struct iommu_group *group;
>> +#endif
>>   +     /* Xen: fwspec->ops are not needed */
>>         if (!fwspec || fwspec->ops != &arm_smmu_ops)
>>                 return -ENODEV;
>>         /*
>> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device *dev)
>>                 }
>>         }
>>   +/*
>> + * Xen: Do not need an iommu group as the stream data is carried by the
>> SMMU
>> + * master device object
>> + */
>> +#if 0
>>         group = iommu_group_get_for_dev(dev);
>>         if (!IS_ERR(group)) {
>>                 iommu_group_put(group);
>> @@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device *dev)
>>         }
>>         return PTR_ERR_OR_ZERO(group);
>> +#endif
>> +       return 0;
>>   }
>>   +/*
>> + * Xen: We can potentially support this function and destroy a device.
>> This
>> + * will be relevant for PCI hotplug. So, will be implemented as needed
>> after
>> + * passthrough support is available.
>> + */
>> +#if 0
>>   static void arm_smmu_remove_device(struct device *dev)
>>   {
>>         struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>> @@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
>>         .put_resv_regions       = arm_smmu_put_resv_regions,
>>         .pgsize_bitmap          = -1UL, /* Restricted during device
attach
>> */
>>   };
>> +#endif
>>     /* Probing and initialisation functions */
>>   static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
>> @@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct
>> arm_smmu_device *smmu, u32 set, u32 clr)
>>                                           1, ARM_SMMU_POLL_TIMEOUT_US);
>>   }
>>   +#if 0 /* Xen: There is no MSI support as yet */
>>   static void arm_smmu_free_msis(void *data)
>>   {
>>         struct device *dev = data;
>> @@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct
>> arm_smmu_device *smmu)
>>         /* Add callback to free MSIs on teardown */
>>         devm_add_action(dev, arm_smmu_free_msis, dev);
>>   }
>> +#endif
>>     static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
>>   {
>>         int irq, ret;
>>   +#if 0 /*Xen: Cannot setup msis for now */
>>         arm_smmu_setup_msis(smmu);
>> +#endif
>>         /* Request interrupt lines */
>>         irq = smmu->evtq.q.irq;
>> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct
>> arm_smmu_device *smmu)
>>                  * Cavium ThunderX2 implementation doesn't not support
>> unique
>>                  * irq lines. Use single irq line for all the SMMUv3
>> interrupts.
>>                  */
>> -               ret = devm_request_threaded_irq(smmu->dev, irq,
>> +               /*
>> +                * Xen: Does not support threaded irqs, so serialise the
>> setup.
>> +                * This is the same for pris and event interrupt lines on
>> other
>> +                * systems
>> +                */
>> +               ret = devm_request_irq(smmu->dev, irq,
>>                                         arm_smmu_combined_irq_handler,
>> -                                       arm_smmu_combined_irq_thread,
>>                                         IRQF_ONESHOT,
>>                                         "arm-smmu-v3-combined-irq",
smmu);
>>                 if (ret < 0)
>> @@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct
>> arm_smmu_device *smmu)
>>                 smmu->features |= ARM_SMMU_FEAT_STALLS;
>>         }
>>   +/*
>> + * Xen: Block stage 1 translations. By doing this here we do not need to
>> set the
>> + * domain->stage explicitly.
>> + */
>> +#if 0
>>         if (reg & IDR0_S1P)
>>                 smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
>> +#endif
>>         if (reg & IDR0_S2P)
>>                 smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
>> @@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct
>> arm_smmu_device *smmu)
>>         if (reg & IDR5_GRAN4K)
>>                 smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
>>   +#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
>>         if (arm_smmu_ops.pgsize_bitmap == -1UL)
>>                 arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
>>         else
>>                 arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
>> +#endif
>>         /* Output address size */
>>         switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
>> @@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct
>> platform_device *pdev,
>>         struct device *dev = smmu->dev;
>>         struct acpi_iort_node *node;
>>   -     node = *(struct acpi_iort_node **)dev_get_platdata(dev);
>> +       /* Xen: Modification to get iort_node */
>> +       node = (struct acpi_iort_node *)dev->acpi_node;
>>         /* Retrieve SMMUv3 specific data */
>>         iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
>> @@ -2703,7 +3200,7 @@ static inline int arm_smmu_device_acpi_probe(struct
>> platform_device *pdev,
>>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>                                     struct arm_smmu_device *smmu)
>>   {
>> -       struct device *dev = &pdev->dev;
>> +       struct device *dev = pdev;
>>         u32 cells;
>>         int ret = -EINVAL;
>>   @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct
>> platform_device *pdev,
>>         parse_driver_options(smmu);
>>   +     /* Xen: of_dma_is_coherent is a stub till dt support is
introduced
>> */
>>         if (of_dma_is_coherent(dev->of_node))
>>                 smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>>   @@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct
>> platform_device *pdev)
>>   {
>>         int irq, ret;
>>         struct resource *res;
>> +#if 0 /*Xen: Do not need to setup sysfs */
>>         resource_size_t ioaddr;
>> +#endif
>>         struct arm_smmu_device *smmu;
>> -       struct device *dev = &pdev->dev;
>> +       struct device *dev = pdev;/* Xen: dev is ignored */
>>         bool bypass;
>>         smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
>> @@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct
>> platform_device *pdev)
>>                 dev_err(dev, "MMIO region too small (%pr)\n", res);
>>                 return -EINVAL;
>>         }
>> +#if 0 /*Xen: Do not need to setup sysfs */
>>         ioaddr = res->start;
>> +#endif
>>         smmu->base = devm_ioremap_resource(dev, res);
>>         if (IS_ERR(smmu->base))
>> @@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct
>> platform_device *pdev)
>>                 return ret;
>>         /* Record our private device structure */
>> +       /* Xen: SMMU is not treated a a platform device*/
>> +#if 0
>>         platform_set_drvdata(pdev, smmu);
>> +#endif
>>         /* Reset the device */
>>         ret = arm_smmu_device_reset(smmu, bypass);
>>         if (ret)
>>                 return ret;
>>   +/* Xen: Not creating an IOMMU device list for Xen */
>> +#if 0
>>         /* And we're up. Go go go! */
>>         ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
>>                                      "smmu3.%pa", &ioaddr);
>> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct
>> platform_device *pdev)
>>                 if (ret)
>>                         return ret;
>>         }
>> +#endif
>> +       /*
>> +        * Xen: Keep a list of all probed devices. This will be used to
>> query
>> +        * the smmu devices based on the fwnode.
>> +        */
>> +       INIT_LIST_HEAD(&smmu->devices);
>> +       spin_lock(&arm_smmu_devices_lock);
>> +       list_add(&smmu->devices, &arm_smmu_devices);
>> +       spin_unlock(&arm_smmu_devices_lock);
>>         return 0;
>>   }
>>   +/* Xen: Unused function */
>> +#if 0
>>   static int arm_smmu_device_remove(struct platform_device *pdev)
>>   {
>>         struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
>> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct
>> platform_device *pdev)
>>   {
>>         arm_smmu_device_remove(pdev);
>>   }
>> +#endif
>> +
>>     static const struct of_device_id arm_smmu_of_match[] = {
>>         { .compatible = "arm,smmu-v3", },
>> @@ -2867,6 +3387,7 @@ static const struct of_device_id
arm_smmu_of_match[]
>> = {
>>   };
>>   MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>   +#if 0
>>   static struct platform_driver arm_smmu_driver = {
>>         .driver = {
>>                 .name           = "arm-smmu-v3",
>> @@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3",
NULL);
>>   MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3
>> implementations");
>>   MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
>>   MODULE_LICENSE("GPL v2");
>> +#endif
>> +
>> +/***** Start of Xen specific code *****/
>> +
>> +static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
>> +{
>> +       struct arm_smmu_xen_domain *smmu_domain =
dom_iommu(d)->arch.priv;
>> +       struct iommu_domain *cfg;
>> +
>> +       spin_lock(&smmu_domain->lock);
>> +       list_for_each_entry(cfg, &smmu_domain->contexts, list) {
>> +               /*
>> +                * Only invalidate the context when SMMU is present.
>> +                * This is because the context initialization is delayed
>> +                * until a master has been added.
>> +                */
>> +               if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
>> +                       continue;
>> +               arm_smmu_tlb_inv_context(cfg->priv);
>> +       }
>> +       spin_unlock(&smmu_domain->lock);
>> +       return 0;
>> +}
>> +
>> +static int __must_check arm_smmu_iotlb_flush(struct domain *d,
>> +                                            unsigned long gfn,
>> +                                            unsigned int page_count)
>> +{
>> +       return arm_smmu_iotlb_flush_all(d);
>> +}
>> +
>> +static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
>> +                                               struct device *dev)
>> +{
>> +       struct iommu_domain *domain;
>> +       struct arm_smmu_xen_domain *xen_domain;
>> +       struct arm_smmu_device *smmu;
>> +       struct arm_smmu_domain *smmu_domain;
>> +
>> +       xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +       smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
>> +       if (!smmu)
>> +               return NULL;
>> +
>> +       /*
>> +        * Loop through the &xen_domain->contexts to locate a context
>> +        * assigned to this SMMU
>> +        */
>> +       list_for_each_entry(domain, &xen_domain->contexts, list) {
>> +               smmu_domain = to_smmu_domain(domain);
>> +               if (smmu_domain->smmu == smmu)
>> +                       return domain;
>> +       }
>> +
>> +       return NULL;
>> +}
>> +
>> +static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
>> +{
>> +       list_del(&domain->list);
>> +       arm_smmu_domain_free(domain);
>> +}
>> +
>> +static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
>> +                              struct device *dev, u32 flag)
>> +{
>> +       int ret = 0;
>> +       struct iommu_domain *domain;
>> +       struct arm_smmu_xen_domain *xen_domain;
>> +       struct arm_smmu_domain *arm_smmu;
>> +
>> +       xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +       if (!dev->archdata.iommu) {
>> +               dev->archdata.iommu = xzalloc(struct
arm_smmu_xen_device);
>> +               if (!dev->archdata.iommu)
>> +                       return -ENOMEM;
>> +       }
>> +
>> +       ret = arm_smmu_add_device(dev);
>> +       if (ret)
>> +               return ret;
>> +
>> +       spin_lock(&xen_domain->lock);
>> +
>> +       /*
>> +        * Check to see if an iommu_domain already exists for this xen
>> domain
>> +        * under the same SMMU
>> +        */
>> +       domain = arm_smmu_get_domain(d, dev);
>> +       if (!domain) {
>> +
>> +               domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
>> +               if (!domain) {
>> +                       ret = -ENOMEM;
>> +                       goto out;
>> +               }
>> +
>> +               arm_smmu = to_smmu_domain(domain);
>> +               arm_smmu->s2_cfg.domain = d;
>> +
>> +               /* Chain the new context to the domain */
>> +               list_add(&domain->list, &xen_domain->contexts);
>> +
>> +       }
>> +
>> +       ret = arm_smmu_attach_dev(domain, dev);
>> +       if (ret) {
>> +               if (domain->ref.counter == 0)
>> +                       arm_smmu_destroy_iommu_domain(domain);
>> +       } else {
>> +               atomic_inc(&domain->ref);
>> +       }
>> +
>> +out:
>> +       spin_unlock(&xen_domain->lock);
>> +       return ret;
>> +}
>> +
>> +static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
>> +{
>> +       struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
>> +       struct arm_smmu_xen_domain *xen_domain;
>> +       struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
>> +
>> +       xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +       if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
>> +               dev_err(dev, " not attached to domain %d\n",
>> d->domain_id);
>> +               return -ESRCH;
>> +       }
>> +
>> +       spin_lock(&xen_domain->lock);
>> +
>> +       arm_smmu_detach_dev(dev);
>> +       atomic_dec(&domain->ref);
>> +
>> +       if (domain->ref.counter == 0)
>> +               arm_smmu_destroy_iommu_domain(domain);
>> +
>> +       spin_unlock(&xen_domain->lock);
>> +
>> +       return 0;
>> +}
>> +
>> +static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
>> +                                u8 devfn,  struct device *dev)
>> +{
>> +       int ret = 0;
>> +
>> +       /* Don't allow remapping on other domain than hwdom */
>> +       if (t && t != hardware_domain)
>> +               return -EPERM;
>> +
>> +       if (t == s)
>> +               return 0;
>> +
>> +       ret = arm_smmu_deassign_dev(s, dev);
>> +       if (ret)
>> +               return ret;
>> +
>> +       if (t) {
>> +               /* No flags are defined for ARM. */
>> +               ret = arm_smmu_assign_dev(t, devfn, dev, 0);
>> +               if (ret)
>> +                       return ret;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static int arm_smmu_iommu_domain_init(struct domain *d)
>> +{
>> +       struct arm_smmu_xen_domain *xen_domain;
>> +
>> +       xen_domain = xzalloc(struct arm_smmu_xen_domain);
>> +       if (!xen_domain)
>> +               return -ENOMEM;
>> +
>> +       spin_lock_init(&xen_domain->lock);
>> +       INIT_LIST_HEAD(&xen_domain->contexts);
>> +
>> +       dom_iommu(d)->arch.priv = xen_domain;
>> +
>> +       return 0;
>> +}
>> +
>> +static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
>> +{
>> +}
>> +
>> +static void arm_smmu_iommu_domain_teardown(struct domain *d)
>> +{
>> +       struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +       ASSERT(list_empty(&xen_domain->contexts));
>> +       xfree(xen_domain);
>> +}
>> +
>> +static int __must_check arm_smmu_map_page(struct domain *d, unsigned
long
>> gfn,
>> +                       unsigned long mfn, unsigned int flags)
>> +{
>> +       p2m_type_t t;
>> +
>> +       /*
>> +        * Grant mappings can be used for DMA requests. The dev_bus_addr
>> +        * returned by the hypercall is the MFN (not the IPA). For device
>> +        * protected by an IOMMU, Xen needs to add a 1:1 mapping in the
>> domain
>> +        * p2m to allow DMA request to work.
>> +        * This is only valid when the domain is directed mapped. Hence
>> this
>> +        * function should only be used by gnttab code with gfn == mfn.
>> +        */
>> +       BUG_ON(!is_domain_direct_mapped(d));
>> +       BUG_ON(mfn != gfn);
>> +
>> +       /* We only support readable and writable flags */
>> +       if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
>> +               return -EINVAL;
>> +
>> +       t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw :
>> p2m_iommu_map_ro;
>> +
>> +       /*
>> +        * The function guest_physmap_add_entry replaces the current
>> mapping
>> +        * if there is already one...
>> +        */
>> +       return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
>> +}
>> +
>> +static int __must_check arm_smmu_unmap_page(struct domain *d, unsigned
>> long gfn)
>> +{
>> +       /*
>> +        * This function should only be used by gnttab code when the
>> domain
>> +        * is direct mapped
>> +        */
>> +       if (!is_domain_direct_mapped(d))
>> +               return -EINVAL;
>> +
>> +       return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
>> +}
>> +
>> +static const struct iommu_ops arm_smmu_iommu_ops = {
>> +       .init = arm_smmu_iommu_domain_init,
>> +       .hwdom_init = arm_smmu_iommu_hwdom_init,
>> +       .teardown = arm_smmu_iommu_domain_teardown,
>> +       .iotlb_flush = arm_smmu_iotlb_flush,
>> +       .iotlb_flush_all = arm_smmu_iotlb_flush_all,
>> +       .assign_device = arm_smmu_assign_dev,
>> +       .reassign_device = arm_smmu_reassign_dev,
>> +       .map_page = arm_smmu_map_page,
>> +       .unmap_page = arm_smmu_unmap_page,
>> +};
>> +
>> +static
>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle
>> *fwnode)
>> +{
>> +       struct arm_smmu_device *smmu = NULL;
>> +
>> +       spin_lock(&arm_smmu_devices_lock);
>> +       list_for_each_entry(smmu, &arm_smmu_devices, devices) {
>> +               if (smmu->dev->fwnode == fwnode)
>> +                       break;
>> +       }
>> +       spin_unlock(&arm_smmu_devices_lock);
>> +
>> +       return smmu;
>> +}
>> +
>> +static __init int arm_smmu_dt_init(struct dt_device_node *dev,
>> +                                  const void *data)
>> +{
>> +       int rc;
>> +
>> +       /*
>> +        * Even if the device can't be initialized, we don't want to
>> +        * give the SMMU device to dom0.
>> +        */
>> +       dt_device_set_used_by(dev, DOMID_XEN);
>> +
>> +       rc = arm_smmu_device_probe(dt_to_dev(dev));
>> +       if (rc)
>> +               return rc;
>> +
>> +       iommu_set_ops(&arm_smmu_iommu_ops);
>> +
>> +       return 0;
>> +}
>> +
>> +DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>> +       .dt_match = arm_smmu_of_match,
>> +       .init = arm_smmu_dt_init,
>> +DT_DEVICE_END
>> +
>> +#ifdef CONFIG_ACPI
>> +/* Set up the IOMMU */
>> +static int __init arm_smmu_acpi_init(const void *data)
>> +{
>> +       int rc;
>> +
>> +       rc = arm_smmu_device_probe((struct device *)data);
>> +       if (rc)
>> +               return rc;
>> +
>> +       iommu_set_ops(&arm_smmu_iommu_ops);
>> +       return 0;
>> +}
>> +
>> +ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>> +       .class_type = ACPI_IORT_NODE_SMMU_V3,
>> +       .init = arm_smmu_acpi_init,
>> +ACPI_DEVICE_END
>> +
>> +#endif
>> diff --git a/xen/include/xen/linux_compat.h
>> b/xen/include/xen/linux_compat.h
>> new file mode 100644
>> index 0000000000..8037be0a3e
>> --- /dev/null
>> +++ b/xen/include/xen/linux_compat.h
>> @@ -0,0 +1,84 @@
>>
>>
+/******************************************************************************
>> + * include/xen/linux_compat.h
>> + *
>> + * Compatibility defines for porting code from Linux to Xen
>> + *
>> + * Copyright (c) 2017 Linaro Limited
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __XEN_LINUX_COMPAT_H__
>> +#define __XEN_LINUX_COMPAT_H__
>> +
>> +#include <asm/types.h>
>> +
>> +typedef paddr_t phys_addr_t;
>> +typedef paddr_t dma_addr_t;
>> +
>> +typedef unsigned int gfp_t;
>> +#define GFP_KERNEL 0
>> +#define __GFP_ZERO 0x01U
>> +
>> +/* Helpers for IRQ functions */
>> +#define free_irq release_irq
>> +
>> +enum irqreturn {
>> +    IRQ_NONE,
>> +    IRQ_HANDLED,
>> +    IRQ_WAKE_THREAD,
>> +};
>> +
>> +typedef enum irqreturn irqreturn_t;
>> +
>> +/* Device logger functions */
>> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## __VA_ARGS__)
>> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ##
__VA_ARGS__)
>> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ##
>> __VA_ARGS__)
>> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
>> +
>> +#define dev_err_ratelimited(dev, fmt, ...)                  \
>> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>> +
>> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
>> +
>> +/* Alias to Xen allocation helpers */
>> +#define kfree xfree
>> +#define kmalloc(size, flags) ({\
>> +       void *__ret_alloc = NULL; \
>> +       if (flags & __GFP_ZERO) \
>> +               __ret_alloc = _xzalloc(size, sizeof(void *)); \
>> +       else \
>> +               __ret_alloc = _xmalloc(size, sizeof(void *)); \
>> +       __ret_alloc; \
>> +})
>> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
>> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
>> +#define kmalloc_array(size, n, flags) ({\
>> +       void *__ret_alloc = NULL; \
>> +       if (flags & __GFP_ZERO) \
>> +               __ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
>> +       else \
>> +               __ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
>> +       __ret_alloc; \
>> +})
>> +
>> +/* Alias to Xen time functions */
>> +#define ktime_t s_time_t
>> +#define ktime_get()             (NOW())
>> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
>> +#define ktime_compare(t,i)      (t > (i))
>> +
>> +#endif /* __XEN_LINUX_COMPAT_H__ */
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xenproject.org
> https://lists.xenproject.org/mailman/listinfo/xen-devel

[-- Attachment #1.2: Type: text/html, Size: 66632 bytes --]

[-- Attachment #2: Type: text/plain, Size: 157 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Manish Jaggi]

Sorry for top posting,

is someone working on the comments on this patch?

-Manish


On 03/10/2018 11:23 PM, Manish Jaggi wrote:
> Hi Sameer,
>
>
> On 02/09/2018 08:40 AM, Sameer Goel wrote:
>> This driver follows an approach similar to smmu driver. The intent here
>> is to reuse as much Linux code as possible.
>> - Glue code has been introduced to bridge the API calls.
>> - Called Linux functions from the Xen IOMMU function calls.
>> - Xen modifications are preceded by /*Xen: comment */
>> - xen/linux_compat: Add a Linux compat header
>>    For porting files directly from Linux it is useful to have a 
>> function mapping
>>    definitions from Linux to Xen. This file adds common API functions 
>> and
>>    other defines that are needed for porting arm SMMU drivers.
>>
>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>> ---
>>   xen/arch/arm/p2m.c                    |   1 +
>>   xen/drivers/Kconfig                   |   2 +
>>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>>   xen/drivers/passthrough/arm/Makefile  |   1 +
>>   xen/drivers/passthrough/arm/smmu-v3.c | 892 
>> ++++++++++++++++++++++++++++++++--
>>   xen/include/xen/linux_compat.h        |  84 ++++
>>   6 files changed, 959 insertions(+), 29 deletions(-)
>>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>>   create mode 100644 xen/include/xen/linux_compat.h
>>
>> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
>> index 65e8b9c6ea..fef7605fd6 100644
>> --- a/xen/arch/arm/p2m.c
>> +++ b/xen/arch/arm/p2m.c
>> @@ -1460,6 +1460,7 @@ err:
>>   static void __init setup_virt_paging_one(void *data)
>>   {
>>       unsigned long val = (unsigned long)data;
>> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>>       WRITE_SYSREG32(val, VTCR_EL2);
>>       isb();
>>   }
>> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
>> index bc3a54f0ea..612655386d 100644
>> --- a/xen/drivers/Kconfig
>> +++ b/xen/drivers/Kconfig
>> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>>     source "drivers/video/Kconfig"
>>   +source "drivers/passthrough/arm/Kconfig"
>> +
>>   endmenu
>> diff --git a/xen/drivers/passthrough/arm/Kconfig 
>> b/xen/drivers/passthrough/arm/Kconfig
>> new file mode 100644
>> index 0000000000..cda899f608
>> --- /dev/null
>> +++ b/xen/drivers/passthrough/arm/Kconfig
>> @@ -0,0 +1,8 @@
>> +
>> +config ARM_SMMU_v3
>> +    bool "ARM SMMUv3 Support"
>> +    depends on ARM_64
>> +    help
>> +     Support for implementations of the ARM System MMU architecture
>> +     version 3.
>> +
>> diff --git a/xen/drivers/passthrough/arm/Makefile 
>> b/xen/drivers/passthrough/arm/Makefile
>> index f4cd26e15d..e14732b55c 100644
>> --- a/xen/drivers/passthrough/arm/Makefile
>> +++ b/xen/drivers/passthrough/arm/Makefile
>> @@ -1,2 +1,3 @@
>>   obj-y += iommu.o
>>   obj-y += smmu.o
>> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c 
>> b/xen/drivers/passthrough/arm/smmu-v3.c
>> index e67ba6c40f..f43485fe6e 100644
>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>> @@ -18,28 +18,414 @@
>>    * Author: Will Deacon <will.deacon@arm.com>
>>    *
>>    * This driver is powered by bad coffee and bombay mix.
>> + *
>> + *
>> + * Based on Linux drivers/iommu/arm-smmu-v3.c
>> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
>> + *
>> + * Xen modifications:
>> + * Sameer Goel <sameer.goel@linaro.org>
>> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
>> + *
>> + */
>> +
>> +#include <xen/acpi.h>
>> +#include <xen/config.h>
>> +#include <xen/delay.h>
>> +#include <xen/errno.h>
>> +#include <xen/err.h>
>> +#include <xen/irq.h>
>> +#include <xen/lib.h>
>> +#include <xen/linux_compat.h>
>> +#include <xen/list.h>
>> +#include <xen/mm.h>
>> +#include <xen/rbtree.h>
>> +#include <xen/sched.h>
>> +#include <xen/sizes.h>
>> +#include <xen/vmap.h>
>> +#include <acpi/acpi_iort.h>
>> +#include <asm/atomic.h>
>> +#include <asm/device.h>
>> +#include <asm/io.h>
>> +#include <asm/platform.h>
>> +
>> +/* Alias to Xen device tree helpers */
>> +#define device_node dt_device_node
>> +#define of_phandle_args dt_phandle_args
>> +#define of_device_id dt_device_match
>> +#define of_match_node dt_match_node
>> +#define of_property_read_u32(np, pname, out) 
>> (!dt_property_read_u32(np, pname, out))
>> +#define of_property_read_bool dt_property_read_bool
>> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
>> +
>> +/* Xen: Helpers to get device MMIO and IRQs */
>> +struct resource {
>> +    u64 addr;
>> +    u64 size;
>> +    unsigned int type;
>> +};
>> +
>> +#define resource_size(res) ((res)->size)
>> +
>> +#define platform_device device
>> +
>> +#define IORESOURCE_MEM 0
>> +#define IORESOURCE_IRQ 1
>> +
>> +static struct resource *platform_get_resource(struct platform_device 
>> *pdev,
>> +                          unsigned int type,
>> +                          unsigned int num)
>> +{
>> +    /*
>> +     * The resource is only used between 2 calls of 
>> platform_get_resource.
>> +     * It's quite ugly but it's avoid to add too much code in the part
>> +     * imported from Linux
>> +     */
>> +    static struct resource res;
>> +    struct acpi_iort_node *iort_node;
>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>> +    int ret = 0;
>> +
>> +    res.type = type;
>> +
>> +    switch (type) {
>> +    case IORESOURCE_MEM:
>> +        if (pdev->type == DEV_ACPI) {
>> +            ret = 1;
>> +            iort_node = pdev->acpi_node;
>> +            node_smmu_data =
>> +                (struct acpi_iort_smmu_v3 *)iort_node->node_data;
>> +
>> +            if (node_smmu_data != NULL) {
>> +                res.addr = node_smmu_data->base_address;
>> +                res.size = SZ_128K;
>> +                ret = 0;
>> +            }
>> +        } else {
>> +            ret = dt_device_get_address(dev_to_dt(pdev), num,
>> +                            &res.addr, &res.size);
>> +        }
>> +
>> +        return ((ret) ? NULL : &res);
>> +
>> +    case IORESOURCE_IRQ:
>> +        /* ACPI case not implemented as there is no use case for it */
>> +        ret = platform_get_irq(dev_to_dt(pdev), num);
>> +
>> +        if (ret < 0)
>> +            return NULL;
>> +
>> +        res.addr = ret;
>> +        res.size = 1;
>> +
>> +        return &res;
>> +
>> +    default:
>> +        return NULL;
>> +    }
>> +}
>> +
>> +static int platform_get_irq_byname(struct platform_device *pdev, 
>> const char *name)
>> +{
>> +    const struct dt_property *dtprop;
>> +    struct acpi_iort_node *iort_node;
>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>> +    int ret = 0;
>> +
>> +    if (pdev->type == DEV_ACPI) {
>> +        iort_node = pdev->acpi_node;
>> +        node_smmu_data = (struct acpi_iort_smmu_v3 
>> *)iort_node->node_data;
>> +
>> +        if (node_smmu_data != NULL) {
>> +            if (!strcmp(name, "eventq"))
>> +                ret = node_smmu_data->event_gsiv;
>> +            else if (!strcmp(name, "priq"))
>> +                ret = node_smmu_data->pri_gsiv;
>> +            else if (!strcmp(name, "cmdq-sync"))
>> +                ret = node_smmu_data->sync_gsiv;
>> +            else if (!strcmp(name, "gerror"))
>> +                ret = node_smmu_data->gerr_gsiv;
>> +            else
>> +                ret = -EINVAL;
>> +        }
>> +    } else {
>> +        dtprop = dt_find_property(dev_to_dt(pdev), 
>> "interrupt-names", NULL);
>> +        if (!dtprop)
>> +            return -EINVAL;
>> +
>> +        if (!dtprop->value)
>> +            return -ENODATA;
>> +    }
>> +
>> +    return ret;
>> +}
>> +
>> +/*
>> + * Xen: Helpers for DMA allocation. Just the function name is reused 
>> for
>> + * porting code these allocation are not managed allocations
>>    */
>>   -#include <linux/acpi.h>
>> -#include <linux/acpi_iort.h>
>> -#include <linux/delay.h>
>> -#include <linux/dma-iommu.h>
>> -#include <linux/err.h>
>> -#include <linux/interrupt.h>
>> -#include <linux/iommu.h>
>> -#include <linux/iopoll.h>
>> -#include <linux/module.h>
>> -#include <linux/msi.h>
>> -#include <linux/of.h>
>> -#include <linux/of_address.h>
>> -#include <linux/of_iommu.h>
>> -#include <linux/of_platform.h>
>> -#include <linux/pci.h>
>> -#include <linux/platform_device.h>
>> -
>> -#include <linux/amba/bus.h>
>> -
>> -#include "io-pgtable.h"
>> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
>> +               dma_addr_t *dma_handle, gfp_t gfp)
>> +{
>> +    void *vaddr;
>> +    unsigned long alignment = size;
>> +
>> +    /*
>> +     * _xzalloc requires that the (align & (align -1)) = 0. Most of the
>> +     * allocations in SMMU code should send the right value for 
>> size. In
>> +     * case this is not true print a warning and align to the size of a
>> +     * (void *)
>> +     */
>> +    if (size & (size - 1)) {
>> +        dev_warn(dev, "Fixing alignment for the DMA buffer\n");
>> +        alignment = sizeof(void *);
>> +    }
>> +
>> +    vaddr = _xzalloc(size, alignment);
>> +    if (!vaddr) {
>> +        dev_err(dev, "DMA allocation failed\n");
>> +        return NULL;
>> +    }
>> +
>> +    *dma_handle = virt_to_maddr(vaddr);
>> +
>> +    return vaddr;
>> +}
>> +
>> +
>> +static void dmam_free_coherent(struct device *dev, size_t size, void 
>> *vaddr,
>> +            dma_addr_t dma_handle)
>> +{
>> +    xfree(vaddr);
>> +}
>> +
>> +/* Xen: Stub out DMA domain related functions */
>> +#define iommu_get_dma_cookie(dom) 0
>> +#define iommu_put_dma_cookie(dom)
>> +
>> +/* Xen: Stub out module param related function */
>> +#define module_param_named(a, b, c, d)
>> +#define MODULE_PARM_DESC(a, b)
>> +
>> +#define dma_set_mask_and_coherent(d, b) 0
>> +
>> +#define of_dma_is_coherent(n) 0
>> +
>> +#define MODULE_DEVICE_TABLE(type, name)
>> +
>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>> +                       struct resource *res)
>> +{
>> +    void __iomem *ptr;
>> +
>> +    if (!res || res->type != IORESOURCE_MEM) {
>> +        dev_err(dev, "Invalid resource\n");
>> +        return ERR_PTR(-EINVAL);
>> +    }
>> +
>> +    ptr = ioremap_nocache(res->addr, res->size);
>> +    if (!ptr) {
>> +        dev_err(dev,
>> +            "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
>> +            res->addr, res->size);
>> +        return ERR_PTR(-ENOMEM);
>> +    }
>> +
>> +    return ptr;
>> +}
>> +
>> +/* Xen: Compatibility define for iommu_domain_geometry.*/
>> +struct iommu_domain_geometry {
>> +    dma_addr_t aperture_start; /* First address that can be 
>> mapped    */
>> +    dma_addr_t aperture_end;   /* Last address that can be 
>> mapped     */
>> +    bool force_aperture;       /* DMA only allowed in mappable 
>> range? */
>> +};
>> +
>> +
>> +/* Xen: Type definitions for iommu_domain */
>> +#define IOMMU_DOMAIN_UNMANAGED 0
>> +#define IOMMU_DOMAIN_DMA 1
>> +#define IOMMU_DOMAIN_IDENTITY 2
>> +
>> +/* Xen: Dummy iommu_domain */
>> +struct iommu_domain {
>> +    /* Runtime SMMU configuration for this iommu_domain */
>> +    struct arm_smmu_domain        *priv;
>> +    unsigned int type;
>> +
>> +    /* Dummy compatibility defines */
>> +    unsigned long pgsize_bitmap;
>> +    struct iommu_domain_geometry geometry;
>> +
>> +    atomic_t ref;
>> +    /*
>> +     * Used to link iommu_domain contexts for a same domain.
>> +     * There is at least one per-SMMU to used by the domain.
>> +     */
>> +    struct list_head        list;
>> +};
>> +
>> +/* Xen: Describes information required for a Xen domain */
>> +struct arm_smmu_xen_domain {
>> +    spinlock_t            lock;
>> +    /* List of iommu domains associated to this domain */
>> +    struct list_head        contexts;
>> +};
>> +
>> +/*
>> + * Xen: Information about each device stored in dev->archdata.iommu
>> + *
>> + * The dev->archdata.iommu stores the iommu_domain (runtime 
>> configuration of
>> + * the SMMU).
>> + */
>> +struct arm_smmu_xen_device {
>> +    struct iommu_domain *domain;
>> +};
>> +
>> +/*
>> + * Xen: io_pgtable compatibility defines.
>> + * Most of these are to port in the S1 translation code as is.
>> + */
>> +struct io_pgtable_ops {
>> +};
>> +
>> +struct iommu_gather_ops {
>> +    void (*tlb_flush_all)(void *cookie);
>> +    void (*tlb_add_flush)(unsigned long iova, size_t size, size_t 
>> granule,
>> +                  bool leaf, void *cookie);
>> +    void (*tlb_sync)(void *cookie);
>> +};
>> +
>> +struct io_pgtable_cfg {
>> +    /*
>> +     * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE 
>> bits in
>> +     *    stage 1 PTEs, for hardware which insists on validating them
>> +     *    even in    non-secure state where they should normally be 
>> ignored.
>> +     *
>> +     * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, IOMMU_WRITE 
>> and
>> +     *    IOMMU_NOEXEC flags and map everything with full access, for
>> +     *    hardware which does not implement the permissions of a given
>> +     *    format, and/or requires some format-specific default value.
>> +     *
>> +     * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching 
>> invalid
>> +     *    (unmapped) entries but the hardware might do so anyway, 
>> perform
>> +     *    TLB maintenance when mapping as well as when unmapping.
>> +     *
>> +     * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
>> +     *    PTEs, for Mediatek IOMMUs which treat it as a 33rd address 
>> bit
>> +     *    when the SoC is in "4GB mode" and they can only access the 
>> high
>> +     *    remap of DRAM (0x1_00000000 to 0x1_ffffffff).
>> +     *
>> +     * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only 
>> ever
>> +     *    be accessed by a fully cache-coherent IOMMU or CPU (e.g. 
>> for a
>> +     *    software-emulated IOMMU), such that pagetable updates need 
>> not
>> +     *    be treated as explicit DMA data.
>> +     */
>> +    #define IO_PGTABLE_QUIRK_ARM_NS        BIT(0)
>> +    #define IO_PGTABLE_QUIRK_NO_PERMS    BIT(1)
>> +    #define IO_PGTABLE_QUIRK_TLBI_ON_MAP    BIT(2)
>> +    #define IO_PGTABLE_QUIRK_ARM_MTK_4GB    BIT(3)
>> +    #define IO_PGTABLE_QUIRK_NO_DMA        BIT(4)
>> +    unsigned long            quirks;
>> +    unsigned long            pgsize_bitmap;
>> +    unsigned int            ias;
>> +    unsigned int            oas;
>> +    const struct iommu_gather_ops    *tlb;
>> +    struct device            *iommu_dev;
>> +
>> +    /* Low-level data specific to the table format */
>> +    union {
>> +        struct {
>> +            u64    ttbr[2];
>> +            u64    tcr;
>> +            u64    mair[2];
>> +        } arm_lpae_s1_cfg;
>> +
>> +        struct {
>> +            u64    vttbr;
>> +            u64    vtcr;
>> +        } arm_lpae_s2_cfg;
>> +
>> +        struct {
>> +            u32    ttbr[2];
>> +            u32    tcr;
>> +            u32    nmrr;
>> +            u32    prrr;
>> +        } arm_v7s_cfg;
>> +    };
>> +};
>> +
>> +enum io_pgtable_fmt {
>> +    ARM_32_LPAE_S1,
>> +    ARM_32_LPAE_S2,
>> +    ARM_64_LPAE_S1,
>> +    ARM_64_LPAE_S2,
>> +    ARM_V7S,
>> +    IO_PGTABLE_NUM_FMTS,
>> +};
>> +
>> +/*
>> + * Xen: The pgtable_ops are used by the S1 translations, so return 
>> the dummy
>> + * address.
>> + */
>> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
> Is this correct? it will make the caller null check fail
>> +#define free_io_pgtable_ops(o)
>> +
>> +/* Xen: Define wrapper for requesting IRQs */
>> +#define IRQF_ONESHOT 0
>> +
>> +typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
>> +
>> +static inline int devm_request_irq(struct device *dev, unsigned int 
>> irq,
>> +                   irq_handler_t handler, unsigned long irqflags,
>> +                   const char *devname, void *dev_id)
>> +{
>> +    /*
>> +     * SMMUv3 implementation can support wired interrupt outputs 
>> that are
>> +     * edge-triggered. Set the irq type as per the spec.
>> +     */
>> +    irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
>> +    return request_irq(irq, irqflags, handler, devname, dev_id);
>> +}
>> +
>> +/*
>> + * Xen does not have a concept of threaded irq, but eventually we 
>> can use
>> + * tasklets to optimize the following function.
>> + */
>> +int devm_request_threaded_irq(struct device *dev, unsigned int irq, 
>> irq_handler_t handler,
>> +                  irq_handler_t thread_fn, unsigned long irqflags,
>> +                  const char *devname, void *dev_id)
>> +{
>> +    return devm_request_irq(dev, irq, thread_fn, irqflags, devname, 
>> dev_id);
>> +}
>> +
>> +/* Xen: The mutex is used only during initialization so the typecast 
>> is safe */
>> +#define mutex spinlock
>> +#define mutex_init spin_lock_init
>> +#define mutex_lock spin_lock
>> +#define mutex_unlock spin_unlock
>> +
>> +#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
>> +({ \
>> +    s_time_t deadline = NOW() + MICROSECS(timeout_us); \
>> +    for (;;) { \
>> +        (val) = op(addr); \
>> +        if (cond) \
>> +            break; \
>> +        if (NOW() > deadline) { \
>> +            (val) = op(addr); \
>> +            break; \
>> +        } \
>> +    udelay(sleep_us); \
>> +    } \
>> +    (cond) ? 0 : -ETIMEDOUT; \
>> +})
>> +
>> +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, 
>> timeout_us) \
>> +    readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, 
>> timeout_us)
>> +
>> +#define VA_BITS 0 /* Only needed for S1 translations */
>>     /* MMIO registers */
>>   #define ARM_SMMU_IDR0            0x0
>> @@ -433,6 +819,7 @@ enum pri_resp {
>>       PRI_RESP_SUCC,
>>   };
>>   +#if 0 /* Xen: No MSI support in this iteration */
>>   enum arm_smmu_msi_index {
>>       EVTQ_MSI_INDEX,
>>       GERROR_MSI_INDEX,
>> @@ -457,6 +844,7 @@ static phys_addr_t 
>> arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
>>           ARM_SMMU_PRIQ_IRQ_CFG2,
>>       },
>>   };
>> +#endif
>>     struct arm_smmu_cmdq_ent {
>>       /* Common fields */
>> @@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
>>       u16                vmid;
>>       u64                vttbr;
>>       u64                vtcr;
>> +    /* Xen: Domain associated to this configuration */
>> +    struct domain            *domain;
>>   };
>>     struct arm_smmu_strtab_ent {
>> @@ -635,9 +1025,21 @@ struct arm_smmu_device {
>>       struct arm_smmu_strtab_cfg    strtab_cfg;
>>         /* IOMMU core code handle */
>> +#if 0 /*Xen: Generic iommu_device ref not needed here */
>>       struct iommu_device        iommu;
>> +#endif
>> +    /* Xen: Need to keep a list of SMMU devices */
>> +    struct list_head                devices;
>>   };
>>   +/* Xen: Keep a list of devices associated with this driver */
>> +static DEFINE_SPINLOCK(arm_smmu_devices_lock);
>> +static LIST_HEAD(arm_smmu_devices);
>> +/* Xen: Helper for finding a device using fwnode */
>> +static
>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle 
>> *fwnode);
>> +
>> +
>>   /* SMMU private data for each master */
>>   struct arm_smmu_master_data {
>>       struct arm_smmu_device        *smmu;
>> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct 
>> arm_smmu_device *smmu, u64 *evt)
>>         dev_info(smmu->dev, "unexpected PRI request received:\n");
>>       dev_info(smmu->dev,
>> -         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at 
>> iova 0x%016llx\n",
>> +         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at 
>> iova %#" PRIx64 "\n",
>>            sid, ssid, grpid, last ? "L" : "",
>>            evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>>            evt[0] & PRIQ_0_PERM_READ ? "R" : "",
>> @@ -1346,6 +1748,8 @@ static irqreturn_t 
>> arm_smmu_combined_irq_handler(int irq, void *dev)
>>   {
>>       arm_smmu_gerror_handler(irq, dev);
>>       arm_smmu_cmdq_sync_handler(irq, dev);
>> +    /*Xen: No threaded irq. So call the required function from here */
>> +    arm_smmu_combined_irq_thread(irq, dev);
>>       return IRQ_WAKE_THREAD;
>>   }
>>   @@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct 
>> arm_smmu_device *smmu)
>>       arm_smmu_cmdq_issue_cmd(smmu, &cmd);
>>   }
>>   +/*
>> + * Xen: Define the IRQ handlers for xen. The linux functions would be
>> + * modified to use the functions defined in the following code.
>> + */
>> +static void arm_smmu_evtq_thread_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_evtq_thread(irq, dev);
>> +}
>> +
>> +static void arm_smmu_priq_thread_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_priq_thread(irq, dev);
>> +}
>> +
>> +static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_cmdq_sync_handler(irq, dev);
>> +}
>> +
>> +static void arm_smmu_gerror_handler_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_gerror_handler(irq, dev);
>> +}
>> +
>> +static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_combined_irq_handler(irq, dev);
>> +}
>> +
>> +#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
>> +#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
>> +#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
>> +#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
>> +#define arm_smmu_combined_irq_handler arm_smmu_combined_irq_handler_xen
>> +
>>   static void arm_smmu_tlb_sync(void *cookie)
>>   {
>>       struct arm_smmu_domain *smmu_domain = cookie;
>> @@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops 
>> arm_smmu_gather_ops = {
>>       .tlb_sync    = arm_smmu_tlb_sync,
>>   };
>>   +#if 0 /*Xen: Unused functionality */
>>   /* IOMMU API */
>>   static bool arm_smmu_capable(enum iommu_cap cap)
>>   {
>> @@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
>>           return false;
>>       }
>>   }
>> +#endif
>>     static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
>>   {
>> @@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct 
>> arm_smmu_domain *smmu_domain,
>>       if (vmid < 0)
>>           return vmid;
>>   -    cfg->vmid    = (u16)vmid;
>> -    cfg->vttbr    = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
>> -    cfg->vtcr    = pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
>> +    /*
>> +     * Xen: Get the ttbr and vtcr values
>> +     * vttbr: This is a shared value with the domain page table
>> +     * vtcr: The TCR settings are the same as CPU since the page
>> +     * tables are shared
>> +     */
>> +
>> +    cfg->vmid    = vmid;
>> +    cfg->vttbr    = page_to_maddr(cfg->domain->arch.p2m.root);
>> +    cfg->vtcr    = READ_SYSREG32(VTCR_EL2) & STRTAB_STE_2_VTCR_MASK;
>>       return 0;
>>   }
>>   @@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct 
>> iommu_domain *domain)
>>       if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
>>           pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
>>   +    /* Xen: pgtbl_ops gets an invalid address */
>>       pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
>>       if (!pgtbl_ops)
>>           return -ENOMEM;
> Will this not fail ?
>> @@ -1721,6 +2175,7 @@ out_unlock:
>>       return ret;
>>   }
>>   +#if 0 /* Xen: Unused functionality */
>>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long 
>> iova,
>>               phys_addr_t paddr, size_t size, int prot)
>>   {
>> @@ -1772,6 +2227,7 @@ struct arm_smmu_device 
>> *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>>       put_device(dev);
>>       return dev ? dev_get_drvdata(dev) : NULL;
>>   }
>> +#endif
>>     static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, 
>> u32 sid)
>>   {
>> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct 
>> arm_smmu_device *smmu, u32 sid)
>>       return sid < limit;
>>   }
>>   +/* Xen: Unused */
>> +#if 0
>>   static struct iommu_ops arm_smmu_ops;
>> +#endif
>> +
>> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
>> +static const struct iommu_ops arm_smmu_iommu_ops;
>> +#define arm_smmu_ops arm_smmu_iommu_ops
>>     static int arm_smmu_add_device(struct device *dev)
>>   {
>> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device 
>> *dev)
>>       struct arm_smmu_device *smmu;
>>       struct arm_smmu_master_data *master;
>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>> +#if 0 /*Xen: iommu_group is not needed */
>>       struct iommu_group *group;
>> +#endif
>>   +    /* Xen: fwspec->ops are not needed */
>>       if (!fwspec || fwspec->ops != &arm_smmu_ops)
>>           return -ENODEV;
>>       /*
>> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device 
>> *dev)
>>           }
>>       }
>>   +/*
>> + * Xen: Do not need an iommu group as the stream data is carried by 
>> the SMMU
>> + * master device object
>> + */
>> +#if 0
>>       group = iommu_group_get_for_dev(dev);
>>       if (!IS_ERR(group)) {
>>           iommu_group_put(group);
>> @@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device 
>> *dev)
>>       }
>>         return PTR_ERR_OR_ZERO(group);
>> +#endif
>> +    return 0;
>>   }
>>   +/*
>> + * Xen: We can potentially support this function and destroy a 
>> device. This
>> + * will be relevant for PCI hotplug. So, will be implemented as 
>> needed after
>> + * passthrough support is available.
>> + */
>> +#if 0
>>   static void arm_smmu_remove_device(struct device *dev)
>>   {
>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>> @@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
>>       .put_resv_regions    = arm_smmu_put_resv_regions,
>>       .pgsize_bitmap        = -1UL, /* Restricted during device 
>> attach */
>>   };
>> +#endif
>>     /* Probing and initialisation functions */
>>   static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
>> @@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct 
>> arm_smmu_device *smmu, u32 set, u32 clr)
>>                         1, ARM_SMMU_POLL_TIMEOUT_US);
>>   }
>>   +#if 0 /* Xen: There is no MSI support as yet */
>>   static void arm_smmu_free_msis(void *data)
>>   {
>>       struct device *dev = data;
>> @@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct 
>> arm_smmu_device *smmu)
>>       /* Add callback to free MSIs on teardown */
>>       devm_add_action(dev, arm_smmu_free_msis, dev);
>>   }
>> +#endif
>>     static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
>>   {
>>       int irq, ret;
>>   +#if 0 /*Xen: Cannot setup msis for now */
>>       arm_smmu_setup_msis(smmu);
>> +#endif
>>         /* Request interrupt lines */
>>       irq = smmu->evtq.q.irq;
>> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct 
>> arm_smmu_device *smmu)
>>            * Cavium ThunderX2 implementation doesn't not support unique
>>            * irq lines. Use single irq line for all the SMMUv3 
>> interrupts.
>>            */
>> -        ret = devm_request_threaded_irq(smmu->dev, irq,
>> +        /*
>> +         * Xen: Does not support threaded irqs, so serialise the setup.
>> +         * This is the same for pris and event interrupt lines on other
>> +         * systems
>> +         */
>> +        ret = devm_request_irq(smmu->dev, irq,
>>                       arm_smmu_combined_irq_handler,
>> -                    arm_smmu_combined_irq_thread,
>>                       IRQF_ONESHOT,
>>                       "arm-smmu-v3-combined-irq", smmu);
>>           if (ret < 0)
>> @@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct 
>> arm_smmu_device *smmu)
>>           smmu->features |= ARM_SMMU_FEAT_STALLS;
>>       }
>>   +/*
>> + * Xen: Block stage 1 translations. By doing this here we do not 
>> need to set the
>> + * domain->stage explicitly.
>> + */
>> +#if 0
>>       if (reg & IDR0_S1P)
>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
>> +#endif
>>         if (reg & IDR0_S2P)
>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
>> @@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct 
>> arm_smmu_device *smmu)
>>       if (reg & IDR5_GRAN4K)
>>           smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
>>   +#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
>>       if (arm_smmu_ops.pgsize_bitmap == -1UL)
>>           arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
>>       else
>>           arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
>> +#endif
>>         /* Output address size */
>>       switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
>> @@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct 
>> platform_device *pdev,
>>       struct device *dev = smmu->dev;
>>       struct acpi_iort_node *node;
>>   -    node = *(struct acpi_iort_node **)dev_get_platdata(dev);
>> +    /* Xen: Modification to get iort_node */
>> +    node = (struct acpi_iort_node *)dev->acpi_node;
>>         /* Retrieve SMMUv3 specific data */
>>       iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
>> @@ -2703,7 +3200,7 @@ static inline int 
>> arm_smmu_device_acpi_probe(struct platform_device *pdev,
>>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>                       struct arm_smmu_device *smmu)
>>   {
>> -    struct device *dev = &pdev->dev;
>> +    struct device *dev = pdev;
>>       u32 cells;
>>       int ret = -EINVAL;
>>   @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct 
>> platform_device *pdev,
>>         parse_driver_options(smmu);
>>   +    /* Xen: of_dma_is_coherent is a stub till dt support is 
>> introduced */
>>       if (of_dma_is_coherent(dev->of_node))
>>           smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>>   @@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct 
>> platform_device *pdev)
>>   {
>>       int irq, ret;
>>       struct resource *res;
>> +#if 0 /*Xen: Do not need to setup sysfs */
>>       resource_size_t ioaddr;
>> +#endif
>>       struct arm_smmu_device *smmu;
>> -    struct device *dev = &pdev->dev;
>> +    struct device *dev = pdev;/* Xen: dev is ignored */
>>       bool bypass;
>>         smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
>> @@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct 
>> platform_device *pdev)
>>           dev_err(dev, "MMIO region too small (%pr)\n", res);
>>           return -EINVAL;
>>       }
>> +#if 0 /*Xen: Do not need to setup sysfs */
>>       ioaddr = res->start;
>> +#endif
>>         smmu->base = devm_ioremap_resource(dev, res);
>>       if (IS_ERR(smmu->base))
>> @@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct 
>> platform_device *pdev)
>>           return ret;
>>         /* Record our private device structure */
>> +    /* Xen: SMMU is not treated a a platform device*/
>> +#if 0
>>       platform_set_drvdata(pdev, smmu);
>> +#endif
>>         /* Reset the device */
>>       ret = arm_smmu_device_reset(smmu, bypass);
>>       if (ret)
>>           return ret;
>>   +/* Xen: Not creating an IOMMU device list for Xen */
>> +#if 0
>>       /* And we're up. Go go go! */
>>       ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
>>                        "smmu3.%pa", &ioaddr);
>> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct 
>> platform_device *pdev)
>>           if (ret)
>>               return ret;
>>       }
>> +#endif
>> +    /*
>> +     * Xen: Keep a list of all probed devices. This will be used to 
>> query
>> +     * the smmu devices based on the fwnode.
>> +     */
>> +    INIT_LIST_HEAD(&smmu->devices);
>> +    spin_lock(&arm_smmu_devices_lock);
>> +    list_add(&smmu->devices, &arm_smmu_devices);
>> +    spin_unlock(&arm_smmu_devices_lock);
>>       return 0;
>>   }
>>   +/* Xen: Unused function */
>> +#if 0
>>   static int arm_smmu_device_remove(struct platform_device *pdev)
>>   {
>>       struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
>> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct 
>> platform_device *pdev)
>>   {
>>       arm_smmu_device_remove(pdev);
>>   }
>> +#endif
>> +
>>     static const struct of_device_id arm_smmu_of_match[] = {
>>       { .compatible = "arm,smmu-v3", },
>> @@ -2867,6 +3387,7 @@ static const struct of_device_id 
>> arm_smmu_of_match[] = {
>>   };
>>   MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>   +#if 0
>>   static struct platform_driver arm_smmu_driver = {
>>       .driver    = {
>>           .name        = "arm-smmu-v3",
>> @@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", 
>> NULL);
>>   MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 
>> implementations");
>>   MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
>>   MODULE_LICENSE("GPL v2");
>> +#endif
>> +
>> +/***** Start of Xen specific code *****/
>> +
>> +static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
>> +{
>> +    struct arm_smmu_xen_domain *smmu_domain = dom_iommu(d)->arch.priv;
>> +    struct iommu_domain *cfg;
>> +
>> +    spin_lock(&smmu_domain->lock);
>> +    list_for_each_entry(cfg, &smmu_domain->contexts, list) {
>> +        /*
>> +         * Only invalidate the context when SMMU is present.
>> +         * This is because the context initialization is delayed
>> +         * until a master has been added.
>> +         */
>> +        if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
>> +            continue;
>> +        arm_smmu_tlb_inv_context(cfg->priv);
>> +    }
>> +    spin_unlock(&smmu_domain->lock);
>> +    return 0;
>> +}
>> +
>> +static int __must_check arm_smmu_iotlb_flush(struct domain *d,
>> +                         unsigned long gfn,
>> +                         unsigned int page_count)
>> +{
>> +    return arm_smmu_iotlb_flush_all(d);
>> +}
>> +
>> +static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
>> +                        struct device *dev)
>> +{
>> +    struct iommu_domain *domain;
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +    struct arm_smmu_device *smmu;
>> +    struct arm_smmu_domain *smmu_domain;
>> +
>> +    xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
>> +    if (!smmu)
>> +        return NULL;
>> +
>> +    /*
>> +     * Loop through the &xen_domain->contexts to locate a context
>> +     * assigned to this SMMU
>> +     */
>> +    list_for_each_entry(domain, &xen_domain->contexts, list) {
>> +        smmu_domain = to_smmu_domain(domain);
>> +        if (smmu_domain->smmu == smmu)
>> +            return domain;
>> +    }
>> +
>> +    return NULL;
>> +}
>> +
>> +static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
>> +{
>> +    list_del(&domain->list);
>> +    arm_smmu_domain_free(domain);
>> +}
>> +
>> +static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
>> +                   struct device *dev, u32 flag)
>> +{
>> +    int ret = 0;
>> +    struct iommu_domain *domain;
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +    struct arm_smmu_domain *arm_smmu;
>> +
>> +    xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    if (!dev->archdata.iommu) {
>> +        dev->archdata.iommu = xzalloc(struct arm_smmu_xen_device);
>> +        if (!dev->archdata.iommu)
>> +            return -ENOMEM;
>> +    }
>> +
>> +    ret = arm_smmu_add_device(dev);
>> +    if (ret)
>> +        return ret;
>> +
>> +    spin_lock(&xen_domain->lock);
>> +
>> +    /*
>> +     * Check to see if an iommu_domain already exists for this xen 
>> domain
>> +     * under the same SMMU
>> +     */
>> +    domain = arm_smmu_get_domain(d, dev);
>> +    if (!domain) {
>> +
>> +        domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
>> +        if (!domain) {
>> +            ret = -ENOMEM;
>> +            goto out;
>> +        }
>> +
>> +        arm_smmu = to_smmu_domain(domain);
>> +        arm_smmu->s2_cfg.domain = d;
>> +
>> +        /* Chain the new context to the domain */
>> +        list_add(&domain->list, &xen_domain->contexts);
>> +
>> +    }
>> +
>> +    ret = arm_smmu_attach_dev(domain, dev);
>> +    if (ret) {
>> +        if (domain->ref.counter == 0)
>> +            arm_smmu_destroy_iommu_domain(domain);
>> +    } else {
>> +        atomic_inc(&domain->ref);
>> +    }
>> +
>> +out:
>> +    spin_unlock(&xen_domain->lock);
>> +    return ret;
>> +}
>> +
>> +static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
>> +{
>> +    struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +    struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
>> +
>> +    xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
>> +        dev_err(dev, " not attached to domain %d\n", d->domain_id);
>> +        return -ESRCH;
>> +    }
>> +
>> +    spin_lock(&xen_domain->lock);
>> +
>> +    arm_smmu_detach_dev(dev);
>> +    atomic_dec(&domain->ref);
>> +
>> +    if (domain->ref.counter == 0)
>> +        arm_smmu_destroy_iommu_domain(domain);
>> +
>> +    spin_unlock(&xen_domain->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
>> +                 u8 devfn,  struct device *dev)
>> +{
>> +    int ret = 0;
>> +
>> +    /* Don't allow remapping on other domain than hwdom */
>> +    if (t && t != hardware_domain)
>> +        return -EPERM;
>> +
>> +    if (t == s)
>> +        return 0;
>> +
>> +    ret = arm_smmu_deassign_dev(s, dev);
>> +    if (ret)
>> +        return ret;
>> +
>> +    if (t) {
>> +        /* No flags are defined for ARM. */
>> +        ret = arm_smmu_assign_dev(t, devfn, dev, 0);
>> +        if (ret)
>> +            return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int arm_smmu_iommu_domain_init(struct domain *d)
>> +{
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +
>> +    xen_domain = xzalloc(struct arm_smmu_xen_domain);
>> +    if (!xen_domain)
>> +        return -ENOMEM;
>> +
>> +    spin_lock_init(&xen_domain->lock);
>> +    INIT_LIST_HEAD(&xen_domain->contexts);
>> +
>> +    dom_iommu(d)->arch.priv = xen_domain;
>> +
>> +    return 0;
>> +}
>> +
>> +static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
>> +{
>> +}
>> +
>> +static void arm_smmu_iommu_domain_teardown(struct domain *d)
>> +{
>> +    struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    ASSERT(list_empty(&xen_domain->contexts));
>> +    xfree(xen_domain);
>> +}
>> +
>> +static int __must_check arm_smmu_map_page(struct domain *d, unsigned 
>> long gfn,
>> +            unsigned long mfn, unsigned int flags)
>> +{
>> +    p2m_type_t t;
>> +
>> +    /*
>> +     * Grant mappings can be used for DMA requests. The dev_bus_addr
>> +     * returned by the hypercall is the MFN (not the IPA). For device
>> +     * protected by an IOMMU, Xen needs to add a 1:1 mapping in the 
>> domain
>> +     * p2m to allow DMA request to work.
>> +     * This is only valid when the domain is directed mapped. Hence 
>> this
>> +     * function should only be used by gnttab code with gfn == mfn.
>> +     */
>> +    BUG_ON(!is_domain_direct_mapped(d));
>> +    BUG_ON(mfn != gfn);
>> +
>> +    /* We only support readable and writable flags */
>> +    if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
>> +        return -EINVAL;
>> +
>> +    t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw : 
>> p2m_iommu_map_ro;
>> +
>> +    /*
>> +     * The function guest_physmap_add_entry replaces the current 
>> mapping
>> +     * if there is already one...
>> +     */
>> +    return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
>> +}
>> +
>> +static int __must_check arm_smmu_unmap_page(struct domain *d, 
>> unsigned long gfn)
>> +{
>> +    /*
>> +     * This function should only be used by gnttab code when the domain
>> +     * is direct mapped
>> +     */
>> +    if (!is_domain_direct_mapped(d))
>> +        return -EINVAL;
>> +
>> +    return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
>> +}
>> +
>> +static const struct iommu_ops arm_smmu_iommu_ops = {
>> +    .init = arm_smmu_iommu_domain_init,
>> +    .hwdom_init = arm_smmu_iommu_hwdom_init,
>> +    .teardown = arm_smmu_iommu_domain_teardown,
>> +    .iotlb_flush = arm_smmu_iotlb_flush,
>> +    .iotlb_flush_all = arm_smmu_iotlb_flush_all,
>> +    .assign_device = arm_smmu_assign_dev,
>> +    .reassign_device = arm_smmu_reassign_dev,
>> +    .map_page = arm_smmu_map_page,
>> +    .unmap_page = arm_smmu_unmap_page,
>> +};
>> +
>> +static
>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle 
>> *fwnode)
>> +{
>> +    struct arm_smmu_device *smmu = NULL;
>> +
>> +    spin_lock(&arm_smmu_devices_lock);
>> +    list_for_each_entry(smmu, &arm_smmu_devices, devices) {
>> +        if (smmu->dev->fwnode == fwnode)
>> +            break;
>> +    }
>> +    spin_unlock(&arm_smmu_devices_lock);
>> +
>> +    return smmu;
>> +}
>> +
>> +static __init int arm_smmu_dt_init(struct dt_device_node *dev,
>> +                   const void *data)
>> +{
>> +    int rc;
>> +
>> +    /*
>> +     * Even if the device can't be initialized, we don't want to
>> +     * give the SMMU device to dom0.
>> +     */
>> +    dt_device_set_used_by(dev, DOMID_XEN);
>> +
>> +    rc = arm_smmu_device_probe(dt_to_dev(dev));
>> +    if (rc)
>> +        return rc;
>> +
>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>> +
>> +    return 0;
>> +}
>> +
>> +DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>> +    .dt_match = arm_smmu_of_match,
>> +    .init = arm_smmu_dt_init,
>> +DT_DEVICE_END
>> +
>> +#ifdef CONFIG_ACPI
>> +/* Set up the IOMMU */
>> +static int __init arm_smmu_acpi_init(const void *data)
>> +{
>> +    int rc;
>> +
>> +    rc = arm_smmu_device_probe((struct device *)data);
>> +    if (rc)
>> +        return rc;
>> +
>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>> +    return 0;
>> +}
>> +
>> +ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>> +    .class_type = ACPI_IORT_NODE_SMMU_V3,
>> +    .init = arm_smmu_acpi_init,
>> +ACPI_DEVICE_END
>> +
>> +#endif
>> diff --git a/xen/include/xen/linux_compat.h 
>> b/xen/include/xen/linux_compat.h
>> new file mode 100644
>> index 0000000000..8037be0a3e
>> --- /dev/null
>> +++ b/xen/include/xen/linux_compat.h
>> @@ -0,0 +1,84 @@
>> +/****************************************************************************** 
>>
>> + * include/xen/linux_compat.h
>> + *
>> + * Compatibility defines for porting code from Linux to Xen
>> + *
>> + * Copyright (c) 2017 Linaro Limited
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __XEN_LINUX_COMPAT_H__
>> +#define __XEN_LINUX_COMPAT_H__
>> +
>> +#include <asm/types.h>
>> +
>> +typedef paddr_t phys_addr_t;
>> +typedef paddr_t dma_addr_t;
>> +
>> +typedef unsigned int gfp_t;
>> +#define GFP_KERNEL 0
>> +#define __GFP_ZERO 0x01U
>> +
>> +/* Helpers for IRQ functions */
>> +#define free_irq release_irq
>> +
>> +enum irqreturn {
>> +    IRQ_NONE,
>> +    IRQ_HANDLED,
>> +    IRQ_WAKE_THREAD,
>> +};
>> +
>> +typedef enum irqreturn irqreturn_t;
>> +
>> +/* Device logger functions */
>> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## __VA_ARGS__)
>> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## 
>> __VA_ARGS__)
>> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## 
>> __VA_ARGS__)
>> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
>> +
>> +#define dev_err_ratelimited(dev, fmt, ...)                  \
>> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>> +
>> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
>> +
>> +/* Alias to Xen allocation helpers */
>> +#define kfree xfree
>> +#define kmalloc(size, flags) ({\
>> +    void *__ret_alloc = NULL; \
>> +    if (flags & __GFP_ZERO) \
>> +        __ret_alloc = _xzalloc(size, sizeof(void *)); \
>> +    else \
>> +        __ret_alloc = _xmalloc(size, sizeof(void *)); \
>> +    __ret_alloc; \
>> +})
>> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
>> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
>> +#define kmalloc_array(size, n, flags) ({\
>> +    void *__ret_alloc = NULL; \
>> +    if (flags & __GFP_ZERO) \
>> +        __ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
>> +    else \
>> +        __ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
>> +    __ret_alloc; \
>> +})
>> +
>> +/* Alias to Xen time functions */
>> +#define ktime_t s_time_t
>> +#define ktime_get()             (NOW())
>> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
>> +#define ktime_compare(t,i)      (t > (i))
>> +
>> +#endif /* __XEN_LINUX_COMPAT_H__ */
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xenproject.org
> https://lists.xenproject.org/mailman/listinfo/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Manish Jaggi]

On 04/19/2018 04:24 PM, Manish Jaggi wrote:
> Sorry for top posting,
>
> is someone working on the comments on this patch?
>
> -Manish
>
If no one is working this code anymore, I would like to pick it up and 
continue maintaining it.
Is it fine with all?

-Regards
Manish
>
> On 03/10/2018 11:23 PM, Manish Jaggi wrote:
>> Hi Sameer,
>>
>>
>> On 02/09/2018 08:40 AM, Sameer Goel wrote:
>>> This driver follows an approach similar to smmu driver. The intent here
>>> is to reuse as much Linux code as possible.
>>> - Glue code has been introduced to bridge the API calls.
>>> - Called Linux functions from the Xen IOMMU function calls.
>>> - Xen modifications are preceded by /*Xen: comment */
>>> - xen/linux_compat: Add a Linux compat header
>>>    For porting files directly from Linux it is useful to have a 
>>> function mapping
>>>    definitions from Linux to Xen. This file adds common API 
>>> functions and
>>>    other defines that are needed for porting arm SMMU drivers.
>>>
>>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>>> ---
>>>   xen/arch/arm/p2m.c                    |   1 +
>>>   xen/drivers/Kconfig                   |   2 +
>>>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>>>   xen/drivers/passthrough/arm/Makefile  |   1 +
>>>   xen/drivers/passthrough/arm/smmu-v3.c | 892 
>>> ++++++++++++++++++++++++++++++++--
>>>   xen/include/xen/linux_compat.h        |  84 ++++
>>>   6 files changed, 959 insertions(+), 29 deletions(-)
>>>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>>>   create mode 100644 xen/include/xen/linux_compat.h
>>>
>>> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
>>> index 65e8b9c6ea..fef7605fd6 100644
>>> --- a/xen/arch/arm/p2m.c
>>> +++ b/xen/arch/arm/p2m.c
>>> @@ -1460,6 +1460,7 @@ err:
>>>   static void __init setup_virt_paging_one(void *data)
>>>   {
>>>       unsigned long val = (unsigned long)data;
>>> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>>>       WRITE_SYSREG32(val, VTCR_EL2);
>>>       isb();
>>>   }
>>> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
>>> index bc3a54f0ea..612655386d 100644
>>> --- a/xen/drivers/Kconfig
>>> +++ b/xen/drivers/Kconfig
>>> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>>>     source "drivers/video/Kconfig"
>>>   +source "drivers/passthrough/arm/Kconfig"
>>> +
>>>   endmenu
>>> diff --git a/xen/drivers/passthrough/arm/Kconfig 
>>> b/xen/drivers/passthrough/arm/Kconfig
>>> new file mode 100644
>>> index 0000000000..cda899f608
>>> --- /dev/null
>>> +++ b/xen/drivers/passthrough/arm/Kconfig
>>> @@ -0,0 +1,8 @@
>>> +
>>> +config ARM_SMMU_v3
>>> +    bool "ARM SMMUv3 Support"
>>> +    depends on ARM_64
>>> +    help
>>> +     Support for implementations of the ARM System MMU architecture
>>> +     version 3.
>>> +
>>> diff --git a/xen/drivers/passthrough/arm/Makefile 
>>> b/xen/drivers/passthrough/arm/Makefile
>>> index f4cd26e15d..e14732b55c 100644
>>> --- a/xen/drivers/passthrough/arm/Makefile
>>> +++ b/xen/drivers/passthrough/arm/Makefile
>>> @@ -1,2 +1,3 @@
>>>   obj-y += iommu.o
>>>   obj-y += smmu.o
>>> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
>>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c 
>>> b/xen/drivers/passthrough/arm/smmu-v3.c
>>> index e67ba6c40f..f43485fe6e 100644
>>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>>> @@ -18,28 +18,414 @@
>>>    * Author: Will Deacon <will.deacon@arm.com>
>>>    *
>>>    * This driver is powered by bad coffee and bombay mix.
>>> + *
>>> + *
>>> + * Based on Linux drivers/iommu/arm-smmu-v3.c
>>> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
>>> + *
>>> + * Xen modifications:
>>> + * Sameer Goel <sameer.goel@linaro.org>
>>> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
>>> + *
>>> + */
>>> +
>>> +#include <xen/acpi.h>
>>> +#include <xen/config.h>
>>> +#include <xen/delay.h>
>>> +#include <xen/errno.h>
>>> +#include <xen/err.h>
>>> +#include <xen/irq.h>
>>> +#include <xen/lib.h>
>>> +#include <xen/linux_compat.h>
>>> +#include <xen/list.h>
>>> +#include <xen/mm.h>
>>> +#include <xen/rbtree.h>
>>> +#include <xen/sched.h>
>>> +#include <xen/sizes.h>
>>> +#include <xen/vmap.h>
>>> +#include <acpi/acpi_iort.h>
>>> +#include <asm/atomic.h>
>>> +#include <asm/device.h>
>>> +#include <asm/io.h>
>>> +#include <asm/platform.h>
>>> +
>>> +/* Alias to Xen device tree helpers */
>>> +#define device_node dt_device_node
>>> +#define of_phandle_args dt_phandle_args
>>> +#define of_device_id dt_device_match
>>> +#define of_match_node dt_match_node
>>> +#define of_property_read_u32(np, pname, out) 
>>> (!dt_property_read_u32(np, pname, out))
>>> +#define of_property_read_bool dt_property_read_bool
>>> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
>>> +
>>> +/* Xen: Helpers to get device MMIO and IRQs */
>>> +struct resource {
>>> +    u64 addr;
>>> +    u64 size;
>>> +    unsigned int type;
>>> +};
>>> +
>>> +#define resource_size(res) ((res)->size)
>>> +
>>> +#define platform_device device
>>> +
>>> +#define IORESOURCE_MEM 0
>>> +#define IORESOURCE_IRQ 1
>>> +
>>> +static struct resource *platform_get_resource(struct 
>>> platform_device *pdev,
>>> +                          unsigned int type,
>>> +                          unsigned int num)
>>> +{
>>> +    /*
>>> +     * The resource is only used between 2 calls of 
>>> platform_get_resource.
>>> +     * It's quite ugly but it's avoid to add too much code in the part
>>> +     * imported from Linux
>>> +     */
>>> +    static struct resource res;
>>> +    struct acpi_iort_node *iort_node;
>>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>>> +    int ret = 0;
>>> +
>>> +    res.type = type;
>>> +
>>> +    switch (type) {
>>> +    case IORESOURCE_MEM:
>>> +        if (pdev->type == DEV_ACPI) {
>>> +            ret = 1;
>>> +            iort_node = pdev->acpi_node;
>>> +            node_smmu_data =
>>> +                (struct acpi_iort_smmu_v3 *)iort_node->node_data;
>>> +
>>> +            if (node_smmu_data != NULL) {
>>> +                res.addr = node_smmu_data->base_address;
>>> +                res.size = SZ_128K;
>>> +                ret = 0;
>>> +            }
>>> +        } else {
>>> +            ret = dt_device_get_address(dev_to_dt(pdev), num,
>>> +                            &res.addr, &res.size);
>>> +        }
>>> +
>>> +        return ((ret) ? NULL : &res);
>>> +
>>> +    case IORESOURCE_IRQ:
>>> +        /* ACPI case not implemented as there is no use case for it */
>>> +        ret = platform_get_irq(dev_to_dt(pdev), num);
>>> +
>>> +        if (ret < 0)
>>> +            return NULL;
>>> +
>>> +        res.addr = ret;
>>> +        res.size = 1;
>>> +
>>> +        return &res;
>>> +
>>> +    default:
>>> +        return NULL;
>>> +    }
>>> +}
>>> +
>>> +static int platform_get_irq_byname(struct platform_device *pdev, 
>>> const char *name)
>>> +{
>>> +    const struct dt_property *dtprop;
>>> +    struct acpi_iort_node *iort_node;
>>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>>> +    int ret = 0;
>>> +
>>> +    if (pdev->type == DEV_ACPI) {
>>> +        iort_node = pdev->acpi_node;
>>> +        node_smmu_data = (struct acpi_iort_smmu_v3 
>>> *)iort_node->node_data;
>>> +
>>> +        if (node_smmu_data != NULL) {
>>> +            if (!strcmp(name, "eventq"))
>>> +                ret = node_smmu_data->event_gsiv;
>>> +            else if (!strcmp(name, "priq"))
>>> +                ret = node_smmu_data->pri_gsiv;
>>> +            else if (!strcmp(name, "cmdq-sync"))
>>> +                ret = node_smmu_data->sync_gsiv;
>>> +            else if (!strcmp(name, "gerror"))
>>> +                ret = node_smmu_data->gerr_gsiv;
>>> +            else
>>> +                ret = -EINVAL;
>>> +        }
>>> +    } else {
>>> +        dtprop = dt_find_property(dev_to_dt(pdev), 
>>> "interrupt-names", NULL);
>>> +        if (!dtprop)
>>> +            return -EINVAL;
>>> +
>>> +        if (!dtprop->value)
>>> +            return -ENODATA;
>>> +    }
>>> +
>>> +    return ret;
>>> +}
>>> +
>>> +/*
>>> + * Xen: Helpers for DMA allocation. Just the function name is 
>>> reused for
>>> + * porting code these allocation are not managed allocations
>>>    */
>>>   -#include <linux/acpi.h>
>>> -#include <linux/acpi_iort.h>
>>> -#include <linux/delay.h>
>>> -#include <linux/dma-iommu.h>
>>> -#include <linux/err.h>
>>> -#include <linux/interrupt.h>
>>> -#include <linux/iommu.h>
>>> -#include <linux/iopoll.h>
>>> -#include <linux/module.h>
>>> -#include <linux/msi.h>
>>> -#include <linux/of.h>
>>> -#include <linux/of_address.h>
>>> -#include <linux/of_iommu.h>
>>> -#include <linux/of_platform.h>
>>> -#include <linux/pci.h>
>>> -#include <linux/platform_device.h>
>>> -
>>> -#include <linux/amba/bus.h>
>>> -
>>> -#include "io-pgtable.h"
>>> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
>>> +               dma_addr_t *dma_handle, gfp_t gfp)
>>> +{
>>> +    void *vaddr;
>>> +    unsigned long alignment = size;
>>> +
>>> +    /*
>>> +     * _xzalloc requires that the (align & (align -1)) = 0. Most of 
>>> the
>>> +     * allocations in SMMU code should send the right value for 
>>> size. In
>>> +     * case this is not true print a warning and align to the size 
>>> of a
>>> +     * (void *)
>>> +     */
>>> +    if (size & (size - 1)) {
>>> +        dev_warn(dev, "Fixing alignment for the DMA buffer\n");
>>> +        alignment = sizeof(void *);
>>> +    }
>>> +
>>> +    vaddr = _xzalloc(size, alignment);
>>> +    if (!vaddr) {
>>> +        dev_err(dev, "DMA allocation failed\n");
>>> +        return NULL;
>>> +    }
>>> +
>>> +    *dma_handle = virt_to_maddr(vaddr);
>>> +
>>> +    return vaddr;
>>> +}
>>> +
>>> +
>>> +static void dmam_free_coherent(struct device *dev, size_t size, 
>>> void *vaddr,
>>> +            dma_addr_t dma_handle)
>>> +{
>>> +    xfree(vaddr);
>>> +}
>>> +
>>> +/* Xen: Stub out DMA domain related functions */
>>> +#define iommu_get_dma_cookie(dom) 0
>>> +#define iommu_put_dma_cookie(dom)
>>> +
>>> +/* Xen: Stub out module param related function */
>>> +#define module_param_named(a, b, c, d)
>>> +#define MODULE_PARM_DESC(a, b)
>>> +
>>> +#define dma_set_mask_and_coherent(d, b) 0
>>> +
>>> +#define of_dma_is_coherent(n) 0
>>> +
>>> +#define MODULE_DEVICE_TABLE(type, name)
>>> +
>>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>>> +                       struct resource *res)
>>> +{
>>> +    void __iomem *ptr;
>>> +
>>> +    if (!res || res->type != IORESOURCE_MEM) {
>>> +        dev_err(dev, "Invalid resource\n");
>>> +        return ERR_PTR(-EINVAL);
>>> +    }
>>> +
>>> +    ptr = ioremap_nocache(res->addr, res->size);
>>> +    if (!ptr) {
>>> +        dev_err(dev,
>>> +            "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
>>> +            res->addr, res->size);
>>> +        return ERR_PTR(-ENOMEM);
>>> +    }
>>> +
>>> +    return ptr;
>>> +}
>>> +
>>> +/* Xen: Compatibility define for iommu_domain_geometry.*/
>>> +struct iommu_domain_geometry {
>>> +    dma_addr_t aperture_start; /* First address that can be 
>>> mapped    */
>>> +    dma_addr_t aperture_end;   /* Last address that can be 
>>> mapped     */
>>> +    bool force_aperture;       /* DMA only allowed in mappable 
>>> range? */
>>> +};
>>> +
>>> +
>>> +/* Xen: Type definitions for iommu_domain */
>>> +#define IOMMU_DOMAIN_UNMANAGED 0
>>> +#define IOMMU_DOMAIN_DMA 1
>>> +#define IOMMU_DOMAIN_IDENTITY 2
>>> +
>>> +/* Xen: Dummy iommu_domain */
>>> +struct iommu_domain {
>>> +    /* Runtime SMMU configuration for this iommu_domain */
>>> +    struct arm_smmu_domain        *priv;
>>> +    unsigned int type;
>>> +
>>> +    /* Dummy compatibility defines */
>>> +    unsigned long pgsize_bitmap;
>>> +    struct iommu_domain_geometry geometry;
>>> +
>>> +    atomic_t ref;
>>> +    /*
>>> +     * Used to link iommu_domain contexts for a same domain.
>>> +     * There is at least one per-SMMU to used by the domain.
>>> +     */
>>> +    struct list_head        list;
>>> +};
>>> +
>>> +/* Xen: Describes information required for a Xen domain */
>>> +struct arm_smmu_xen_domain {
>>> +    spinlock_t            lock;
>>> +    /* List of iommu domains associated to this domain */
>>> +    struct list_head        contexts;
>>> +};
>>> +
>>> +/*
>>> + * Xen: Information about each device stored in dev->archdata.iommu
>>> + *
>>> + * The dev->archdata.iommu stores the iommu_domain (runtime 
>>> configuration of
>>> + * the SMMU).
>>> + */
>>> +struct arm_smmu_xen_device {
>>> +    struct iommu_domain *domain;
>>> +};
>>> +
>>> +/*
>>> + * Xen: io_pgtable compatibility defines.
>>> + * Most of these are to port in the S1 translation code as is.
>>> + */
>>> +struct io_pgtable_ops {
>>> +};
>>> +
>>> +struct iommu_gather_ops {
>>> +    void (*tlb_flush_all)(void *cookie);
>>> +    void (*tlb_add_flush)(unsigned long iova, size_t size, size_t 
>>> granule,
>>> +                  bool leaf, void *cookie);
>>> +    void (*tlb_sync)(void *cookie);
>>> +};
>>> +
>>> +struct io_pgtable_cfg {
>>> +    /*
>>> +     * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE 
>>> bits in
>>> +     *    stage 1 PTEs, for hardware which insists on validating them
>>> +     *    even in    non-secure state where they should normally be 
>>> ignored.
>>> +     *
>>> +     * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, 
>>> IOMMU_WRITE and
>>> +     *    IOMMU_NOEXEC flags and map everything with full access, for
>>> +     *    hardware which does not implement the permissions of a given
>>> +     *    format, and/or requires some format-specific default value.
>>> +     *
>>> +     * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching 
>>> invalid
>>> +     *    (unmapped) entries but the hardware might do so anyway, 
>>> perform
>>> +     *    TLB maintenance when mapping as well as when unmapping.
>>> +     *
>>> +     * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
>>> +     *    PTEs, for Mediatek IOMMUs which treat it as a 33rd 
>>> address bit
>>> +     *    when the SoC is in "4GB mode" and they can only access 
>>> the high
>>> +     *    remap of DRAM (0x1_00000000 to 0x1_ffffffff).
>>> +     *
>>> +     * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will 
>>> only ever
>>> +     *    be accessed by a fully cache-coherent IOMMU or CPU (e.g. 
>>> for a
>>> +     *    software-emulated IOMMU), such that pagetable updates 
>>> need not
>>> +     *    be treated as explicit DMA data.
>>> +     */
>>> +    #define IO_PGTABLE_QUIRK_ARM_NS        BIT(0)
>>> +    #define IO_PGTABLE_QUIRK_NO_PERMS    BIT(1)
>>> +    #define IO_PGTABLE_QUIRK_TLBI_ON_MAP    BIT(2)
>>> +    #define IO_PGTABLE_QUIRK_ARM_MTK_4GB    BIT(3)
>>> +    #define IO_PGTABLE_QUIRK_NO_DMA        BIT(4)
>>> +    unsigned long            quirks;
>>> +    unsigned long            pgsize_bitmap;
>>> +    unsigned int            ias;
>>> +    unsigned int            oas;
>>> +    const struct iommu_gather_ops    *tlb;
>>> +    struct device            *iommu_dev;
>>> +
>>> +    /* Low-level data specific to the table format */
>>> +    union {
>>> +        struct {
>>> +            u64    ttbr[2];
>>> +            u64    tcr;
>>> +            u64    mair[2];
>>> +        } arm_lpae_s1_cfg;
>>> +
>>> +        struct {
>>> +            u64    vttbr;
>>> +            u64    vtcr;
>>> +        } arm_lpae_s2_cfg;
>>> +
>>> +        struct {
>>> +            u32    ttbr[2];
>>> +            u32    tcr;
>>> +            u32    nmrr;
>>> +            u32    prrr;
>>> +        } arm_v7s_cfg;
>>> +    };
>>> +};
>>> +
>>> +enum io_pgtable_fmt {
>>> +    ARM_32_LPAE_S1,
>>> +    ARM_32_LPAE_S2,
>>> +    ARM_64_LPAE_S1,
>>> +    ARM_64_LPAE_S2,
>>> +    ARM_V7S,
>>> +    IO_PGTABLE_NUM_FMTS,
>>> +};
>>> +
>>> +/*
>>> + * Xen: The pgtable_ops are used by the S1 translations, so return 
>>> the dummy
>>> + * address.
>>> + */
>>> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
>> Is this correct? it will make the caller null check fail
>>> +#define free_io_pgtable_ops(o)
>>> +
>>> +/* Xen: Define wrapper for requesting IRQs */
>>> +#define IRQF_ONESHOT 0
>>> +
>>> +typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
>>> +
>>> +static inline int devm_request_irq(struct device *dev, unsigned int 
>>> irq,
>>> +                   irq_handler_t handler, unsigned long irqflags,
>>> +                   const char *devname, void *dev_id)
>>> +{
>>> +    /*
>>> +     * SMMUv3 implementation can support wired interrupt outputs 
>>> that are
>>> +     * edge-triggered. Set the irq type as per the spec.
>>> +     */
>>> +    irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
>>> +    return request_irq(irq, irqflags, handler, devname, dev_id);
>>> +}
>>> +
>>> +/*
>>> + * Xen does not have a concept of threaded irq, but eventually we 
>>> can use
>>> + * tasklets to optimize the following function.
>>> + */
>>> +int devm_request_threaded_irq(struct device *dev, unsigned int irq, 
>>> irq_handler_t handler,
>>> +                  irq_handler_t thread_fn, unsigned long irqflags,
>>> +                  const char *devname, void *dev_id)
>>> +{
>>> +    return devm_request_irq(dev, irq, thread_fn, irqflags, devname, 
>>> dev_id);
>>> +}
>>> +
>>> +/* Xen: The mutex is used only during initialization so the 
>>> typecast is safe */
>>> +#define mutex spinlock
>>> +#define mutex_init spin_lock_init
>>> +#define mutex_lock spin_lock
>>> +#define mutex_unlock spin_unlock
>>> +
>>> +#define readx_poll_timeout(op, addr, val, cond, sleep_us, 
>>> timeout_us) \
>>> +({ \
>>> +    s_time_t deadline = NOW() + MICROSECS(timeout_us); \
>>> +    for (;;) { \
>>> +        (val) = op(addr); \
>>> +        if (cond) \
>>> +            break; \
>>> +        if (NOW() > deadline) { \
>>> +            (val) = op(addr); \
>>> +            break; \
>>> +        } \
>>> +    udelay(sleep_us); \
>>> +    } \
>>> +    (cond) ? 0 : -ETIMEDOUT; \
>>> +})
>>> +
>>> +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, 
>>> timeout_us) \
>>> +    readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, 
>>> timeout_us)
>>> +
>>> +#define VA_BITS 0 /* Only needed for S1 translations */
>>>     /* MMIO registers */
>>>   #define ARM_SMMU_IDR0            0x0
>>> @@ -433,6 +819,7 @@ enum pri_resp {
>>>       PRI_RESP_SUCC,
>>>   };
>>>   +#if 0 /* Xen: No MSI support in this iteration */
>>>   enum arm_smmu_msi_index {
>>>       EVTQ_MSI_INDEX,
>>>       GERROR_MSI_INDEX,
>>> @@ -457,6 +844,7 @@ static phys_addr_t 
>>> arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
>>>           ARM_SMMU_PRIQ_IRQ_CFG2,
>>>       },
>>>   };
>>> +#endif
>>>     struct arm_smmu_cmdq_ent {
>>>       /* Common fields */
>>> @@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
>>>       u16                vmid;
>>>       u64                vttbr;
>>>       u64                vtcr;
>>> +    /* Xen: Domain associated to this configuration */
>>> +    struct domain            *domain;
>>>   };
>>>     struct arm_smmu_strtab_ent {
>>> @@ -635,9 +1025,21 @@ struct arm_smmu_device {
>>>       struct arm_smmu_strtab_cfg    strtab_cfg;
>>>         /* IOMMU core code handle */
>>> +#if 0 /*Xen: Generic iommu_device ref not needed here */
>>>       struct iommu_device        iommu;
>>> +#endif
>>> +    /* Xen: Need to keep a list of SMMU devices */
>>> +    struct list_head                devices;
>>>   };
>>>   +/* Xen: Keep a list of devices associated with this driver */
>>> +static DEFINE_SPINLOCK(arm_smmu_devices_lock);
>>> +static LIST_HEAD(arm_smmu_devices);
>>> +/* Xen: Helper for finding a device using fwnode */
>>> +static
>>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle 
>>> *fwnode);
>>> +
>>> +
>>>   /* SMMU private data for each master */
>>>   struct arm_smmu_master_data {
>>>       struct arm_smmu_device        *smmu;
>>> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct 
>>> arm_smmu_device *smmu, u64 *evt)
>>>         dev_info(smmu->dev, "unexpected PRI request received:\n");
>>>       dev_info(smmu->dev,
>>> -         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at 
>>> iova 0x%016llx\n",
>>> +         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at 
>>> iova %#" PRIx64 "\n",
>>>            sid, ssid, grpid, last ? "L" : "",
>>>            evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>>>            evt[0] & PRIQ_0_PERM_READ ? "R" : "",
>>> @@ -1346,6 +1748,8 @@ static irqreturn_t 
>>> arm_smmu_combined_irq_handler(int irq, void *dev)
>>>   {
>>>       arm_smmu_gerror_handler(irq, dev);
>>>       arm_smmu_cmdq_sync_handler(irq, dev);
>>> +    /*Xen: No threaded irq. So call the required function from here */
>>> +    arm_smmu_combined_irq_thread(irq, dev);
>>>       return IRQ_WAKE_THREAD;
>>>   }
>>>   @@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct 
>>> arm_smmu_device *smmu)
>>>       arm_smmu_cmdq_issue_cmd(smmu, &cmd);
>>>   }
>>>   +/*
>>> + * Xen: Define the IRQ handlers for xen. The linux functions would be
>>> + * modified to use the functions defined in the following code.
>>> + */
>>> +static void arm_smmu_evtq_thread_xen(int irq, void *dev,
>>> +                       struct cpu_user_regs *regs)
>>> +{
>>> +    arm_smmu_evtq_thread(irq, dev);
>>> +}
>>> +
>>> +static void arm_smmu_priq_thread_xen(int irq, void *dev,
>>> +                       struct cpu_user_regs *regs)
>>> +{
>>> +    arm_smmu_priq_thread(irq, dev);
>>> +}
>>> +
>>> +static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
>>> +                       struct cpu_user_regs *regs)
>>> +{
>>> +    arm_smmu_cmdq_sync_handler(irq, dev);
>>> +}
>>> +
>>> +static void arm_smmu_gerror_handler_xen(int irq, void *dev,
>>> +                       struct cpu_user_regs *regs)
>>> +{
>>> +    arm_smmu_gerror_handler(irq, dev);
>>> +}
>>> +
>>> +static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
>>> +                       struct cpu_user_regs *regs)
>>> +{
>>> +    arm_smmu_combined_irq_handler(irq, dev);
>>> +}
>>> +
>>> +#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
>>> +#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
>>> +#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
>>> +#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
>>> +#define arm_smmu_combined_irq_handler 
>>> arm_smmu_combined_irq_handler_xen
>>> +
>>>   static void arm_smmu_tlb_sync(void *cookie)
>>>   {
>>>       struct arm_smmu_domain *smmu_domain = cookie;
>>> @@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops 
>>> arm_smmu_gather_ops = {
>>>       .tlb_sync    = arm_smmu_tlb_sync,
>>>   };
>>>   +#if 0 /*Xen: Unused functionality */
>>>   /* IOMMU API */
>>>   static bool arm_smmu_capable(enum iommu_cap cap)
>>>   {
>>> @@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
>>>           return false;
>>>       }
>>>   }
>>> +#endif
>>>     static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
>>>   {
>>> @@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct 
>>> arm_smmu_domain *smmu_domain,
>>>       if (vmid < 0)
>>>           return vmid;
>>>   -    cfg->vmid    = (u16)vmid;
>>> -    cfg->vttbr    = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
>>> -    cfg->vtcr    = pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
>>> +    /*
>>> +     * Xen: Get the ttbr and vtcr values
>>> +     * vttbr: This is a shared value with the domain page table
>>> +     * vtcr: The TCR settings are the same as CPU since the page
>>> +     * tables are shared
>>> +     */
>>> +
>>> +    cfg->vmid    = vmid;
>>> +    cfg->vttbr    = page_to_maddr(cfg->domain->arch.p2m.root);
>>> +    cfg->vtcr    = READ_SYSREG32(VTCR_EL2) & STRTAB_STE_2_VTCR_MASK;
>>>       return 0;
>>>   }
>>>   @@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct 
>>> iommu_domain *domain)
>>>       if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
>>>           pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
>>>   +    /* Xen: pgtbl_ops gets an invalid address */
>>>       pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
>>>       if (!pgtbl_ops)
>>>           return -ENOMEM;
>> Will this not fail ?
>>> @@ -1721,6 +2175,7 @@ out_unlock:
>>>       return ret;
>>>   }
>>>   +#if 0 /* Xen: Unused functionality */
>>>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long 
>>> iova,
>>>               phys_addr_t paddr, size_t size, int prot)
>>>   {
>>> @@ -1772,6 +2227,7 @@ struct arm_smmu_device 
>>> *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>>>       put_device(dev);
>>>       return dev ? dev_get_drvdata(dev) : NULL;
>>>   }
>>> +#endif
>>>     static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, 
>>> u32 sid)
>>>   {
>>> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct 
>>> arm_smmu_device *smmu, u32 sid)
>>>       return sid < limit;
>>>   }
>>>   +/* Xen: Unused */
>>> +#if 0
>>>   static struct iommu_ops arm_smmu_ops;
>>> +#endif
>>> +
>>> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
>>> +static const struct iommu_ops arm_smmu_iommu_ops;
>>> +#define arm_smmu_ops arm_smmu_iommu_ops
>>>     static int arm_smmu_add_device(struct device *dev)
>>>   {
>>> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device 
>>> *dev)
>>>       struct arm_smmu_device *smmu;
>>>       struct arm_smmu_master_data *master;
>>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>>> +#if 0 /*Xen: iommu_group is not needed */
>>>       struct iommu_group *group;
>>> +#endif
>>>   +    /* Xen: fwspec->ops are not needed */
>>>       if (!fwspec || fwspec->ops != &arm_smmu_ops)
>>>           return -ENODEV;
>>>       /*
>>> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device 
>>> *dev)
>>>           }
>>>       }
>>>   +/*
>>> + * Xen: Do not need an iommu group as the stream data is carried by 
>>> the SMMU
>>> + * master device object
>>> + */
>>> +#if 0
>>>       group = iommu_group_get_for_dev(dev);
>>>       if (!IS_ERR(group)) {
>>>           iommu_group_put(group);
>>> @@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device 
>>> *dev)
>>>       }
>>>         return PTR_ERR_OR_ZERO(group);
>>> +#endif
>>> +    return 0;
>>>   }
>>>   +/*
>>> + * Xen: We can potentially support this function and destroy a 
>>> device. This
>>> + * will be relevant for PCI hotplug. So, will be implemented as 
>>> needed after
>>> + * passthrough support is available.
>>> + */
>>> +#if 0
>>>   static void arm_smmu_remove_device(struct device *dev)
>>>   {
>>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>>> @@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
>>>       .put_resv_regions    = arm_smmu_put_resv_regions,
>>>       .pgsize_bitmap        = -1UL, /* Restricted during device 
>>> attach */
>>>   };
>>> +#endif
>>>     /* Probing and initialisation functions */
>>>   static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
>>> @@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct 
>>> arm_smmu_device *smmu, u32 set, u32 clr)
>>>                         1, ARM_SMMU_POLL_TIMEOUT_US);
>>>   }
>>>   +#if 0 /* Xen: There is no MSI support as yet */
>>>   static void arm_smmu_free_msis(void *data)
>>>   {
>>>       struct device *dev = data;
>>> @@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct 
>>> arm_smmu_device *smmu)
>>>       /* Add callback to free MSIs on teardown */
>>>       devm_add_action(dev, arm_smmu_free_msis, dev);
>>>   }
>>> +#endif
>>>     static void arm_smmu_setup_unique_irqs(struct arm_smmu_device 
>>> *smmu)
>>>   {
>>>       int irq, ret;
>>>   +#if 0 /*Xen: Cannot setup msis for now */
>>>       arm_smmu_setup_msis(smmu);
>>> +#endif
>>>         /* Request interrupt lines */
>>>       irq = smmu->evtq.q.irq;
>>> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct 
>>> arm_smmu_device *smmu)
>>>            * Cavium ThunderX2 implementation doesn't not support unique
>>>            * irq lines. Use single irq line for all the SMMUv3 
>>> interrupts.
>>>            */
>>> -        ret = devm_request_threaded_irq(smmu->dev, irq,
>>> +        /*
>>> +         * Xen: Does not support threaded irqs, so serialise the 
>>> setup.
>>> +         * This is the same for pris and event interrupt lines on 
>>> other
>>> +         * systems
>>> +         */
>>> +        ret = devm_request_irq(smmu->dev, irq,
>>>                       arm_smmu_combined_irq_handler,
>>> -                    arm_smmu_combined_irq_thread,
>>>                       IRQF_ONESHOT,
>>>                       "arm-smmu-v3-combined-irq", smmu);
>>>           if (ret < 0)
>>> @@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct 
>>> arm_smmu_device *smmu)
>>>           smmu->features |= ARM_SMMU_FEAT_STALLS;
>>>       }
>>>   +/*
>>> + * Xen: Block stage 1 translations. By doing this here we do not 
>>> need to set the
>>> + * domain->stage explicitly.
>>> + */
>>> +#if 0
>>>       if (reg & IDR0_S1P)
>>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
>>> +#endif
>>>         if (reg & IDR0_S2P)
>>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
>>> @@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct 
>>> arm_smmu_device *smmu)
>>>       if (reg & IDR5_GRAN4K)
>>>           smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
>>>   +#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
>>>       if (arm_smmu_ops.pgsize_bitmap == -1UL)
>>>           arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
>>>       else
>>>           arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
>>> +#endif
>>>         /* Output address size */
>>>       switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
>>> @@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct 
>>> platform_device *pdev,
>>>       struct device *dev = smmu->dev;
>>>       struct acpi_iort_node *node;
>>>   -    node = *(struct acpi_iort_node **)dev_get_platdata(dev);
>>> +    /* Xen: Modification to get iort_node */
>>> +    node = (struct acpi_iort_node *)dev->acpi_node;
>>>         /* Retrieve SMMUv3 specific data */
>>>       iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
>>> @@ -2703,7 +3200,7 @@ static inline int 
>>> arm_smmu_device_acpi_probe(struct platform_device *pdev,
>>>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>>                       struct arm_smmu_device *smmu)
>>>   {
>>> -    struct device *dev = &pdev->dev;
>>> +    struct device *dev = pdev;
>>>       u32 cells;
>>>       int ret = -EINVAL;
>>>   @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct 
>>> platform_device *pdev,
>>>         parse_driver_options(smmu);
>>>   +    /* Xen: of_dma_is_coherent is a stub till dt support is 
>>> introduced */
>>>       if (of_dma_is_coherent(dev->of_node))
>>>           smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>>>   @@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct 
>>> platform_device *pdev)
>>>   {
>>>       int irq, ret;
>>>       struct resource *res;
>>> +#if 0 /*Xen: Do not need to setup sysfs */
>>>       resource_size_t ioaddr;
>>> +#endif
>>>       struct arm_smmu_device *smmu;
>>> -    struct device *dev = &pdev->dev;
>>> +    struct device *dev = pdev;/* Xen: dev is ignored */
>>>       bool bypass;
>>>         smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
>>> @@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct 
>>> platform_device *pdev)
>>>           dev_err(dev, "MMIO region too small (%pr)\n", res);
>>>           return -EINVAL;
>>>       }
>>> +#if 0 /*Xen: Do not need to setup sysfs */
>>>       ioaddr = res->start;
>>> +#endif
>>>         smmu->base = devm_ioremap_resource(dev, res);
>>>       if (IS_ERR(smmu->base))
>>> @@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct 
>>> platform_device *pdev)
>>>           return ret;
>>>         /* Record our private device structure */
>>> +    /* Xen: SMMU is not treated a a platform device*/
>>> +#if 0
>>>       platform_set_drvdata(pdev, smmu);
>>> +#endif
>>>         /* Reset the device */
>>>       ret = arm_smmu_device_reset(smmu, bypass);
>>>       if (ret)
>>>           return ret;
>>>   +/* Xen: Not creating an IOMMU device list for Xen */
>>> +#if 0
>>>       /* And we're up. Go go go! */
>>>       ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
>>>                        "smmu3.%pa", &ioaddr);
>>> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct 
>>> platform_device *pdev)
>>>           if (ret)
>>>               return ret;
>>>       }
>>> +#endif
>>> +    /*
>>> +     * Xen: Keep a list of all probed devices. This will be used to 
>>> query
>>> +     * the smmu devices based on the fwnode.
>>> +     */
>>> +    INIT_LIST_HEAD(&smmu->devices);
>>> +    spin_lock(&arm_smmu_devices_lock);
>>> +    list_add(&smmu->devices, &arm_smmu_devices);
>>> +    spin_unlock(&arm_smmu_devices_lock);
>>>       return 0;
>>>   }
>>>   +/* Xen: Unused function */
>>> +#if 0
>>>   static int arm_smmu_device_remove(struct platform_device *pdev)
>>>   {
>>>       struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
>>> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct 
>>> platform_device *pdev)
>>>   {
>>>       arm_smmu_device_remove(pdev);
>>>   }
>>> +#endif
>>> +
>>>     static const struct of_device_id arm_smmu_of_match[] = {
>>>       { .compatible = "arm,smmu-v3", },
>>> @@ -2867,6 +3387,7 @@ static const struct of_device_id 
>>> arm_smmu_of_match[] = {
>>>   };
>>>   MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>>   +#if 0
>>>   static struct platform_driver arm_smmu_driver = {
>>>       .driver    = {
>>>           .name        = "arm-smmu-v3",
>>> @@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", 
>>> NULL);
>>>   MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 
>>> implementations");
>>>   MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
>>>   MODULE_LICENSE("GPL v2");
>>> +#endif
>>> +
>>> +/***** Start of Xen specific code *****/
>>> +
>>> +static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
>>> +{
>>> +    struct arm_smmu_xen_domain *smmu_domain = dom_iommu(d)->arch.priv;
>>> +    struct iommu_domain *cfg;
>>> +
>>> +    spin_lock(&smmu_domain->lock);
>>> +    list_for_each_entry(cfg, &smmu_domain->contexts, list) {
>>> +        /*
>>> +         * Only invalidate the context when SMMU is present.
>>> +         * This is because the context initialization is delayed
>>> +         * until a master has been added.
>>> +         */
>>> +        if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
>>> +            continue;
>>> +        arm_smmu_tlb_inv_context(cfg->priv);
>>> +    }
>>> +    spin_unlock(&smmu_domain->lock);
>>> +    return 0;
>>> +}
>>> +
>>> +static int __must_check arm_smmu_iotlb_flush(struct domain *d,
>>> +                         unsigned long gfn,
>>> +                         unsigned int page_count)
>>> +{
>>> +    return arm_smmu_iotlb_flush_all(d);
>>> +}
>>> +
>>> +static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
>>> +                        struct device *dev)
>>> +{
>>> +    struct iommu_domain *domain;
>>> +    struct arm_smmu_xen_domain *xen_domain;
>>> +    struct arm_smmu_device *smmu;
>>> +    struct arm_smmu_domain *smmu_domain;
>>> +
>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>> +
>>> +    smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
>>> +    if (!smmu)
>>> +        return NULL;
>>> +
>>> +    /*
>>> +     * Loop through the &xen_domain->contexts to locate a context
>>> +     * assigned to this SMMU
>>> +     */
>>> +    list_for_each_entry(domain, &xen_domain->contexts, list) {
>>> +        smmu_domain = to_smmu_domain(domain);
>>> +        if (smmu_domain->smmu == smmu)
>>> +            return domain;
>>> +    }
>>> +
>>> +    return NULL;
>>> +}
>>> +
>>> +static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
>>> +{
>>> +    list_del(&domain->list);
>>> +    arm_smmu_domain_free(domain);
>>> +}
>>> +
>>> +static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
>>> +                   struct device *dev, u32 flag)
>>> +{
>>> +    int ret = 0;
>>> +    struct iommu_domain *domain;
>>> +    struct arm_smmu_xen_domain *xen_domain;
>>> +    struct arm_smmu_domain *arm_smmu;
>>> +
>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>> +
>>> +    if (!dev->archdata.iommu) {
>>> +        dev->archdata.iommu = xzalloc(struct arm_smmu_xen_device);
>>> +        if (!dev->archdata.iommu)
>>> +            return -ENOMEM;
>>> +    }
>>> +
>>> +    ret = arm_smmu_add_device(dev);
>>> +    if (ret)
>>> +        return ret;
>>> +
>>> +    spin_lock(&xen_domain->lock);
>>> +
>>> +    /*
>>> +     * Check to see if an iommu_domain already exists for this xen 
>>> domain
>>> +     * under the same SMMU
>>> +     */
>>> +    domain = arm_smmu_get_domain(d, dev);
>>> +    if (!domain) {
>>> +
>>> +        domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
>>> +        if (!domain) {
>>> +            ret = -ENOMEM;
>>> +            goto out;
>>> +        }
>>> +
>>> +        arm_smmu = to_smmu_domain(domain);
>>> +        arm_smmu->s2_cfg.domain = d;
>>> +
>>> +        /* Chain the new context to the domain */
>>> +        list_add(&domain->list, &xen_domain->contexts);
>>> +
>>> +    }
>>> +
>>> +    ret = arm_smmu_attach_dev(domain, dev);
>>> +    if (ret) {
>>> +        if (domain->ref.counter == 0)
>>> +            arm_smmu_destroy_iommu_domain(domain);
>>> +    } else {
>>> +        atomic_inc(&domain->ref);
>>> +    }
>>> +
>>> +out:
>>> +    spin_unlock(&xen_domain->lock);
>>> +    return ret;
>>> +}
>>> +
>>> +static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
>>> +{
>>> +    struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
>>> +    struct arm_smmu_xen_domain *xen_domain;
>>> +    struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
>>> +
>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>> +
>>> +    if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
>>> +        dev_err(dev, " not attached to domain %d\n", d->domain_id);
>>> +        return -ESRCH;
>>> +    }
>>> +
>>> +    spin_lock(&xen_domain->lock);
>>> +
>>> +    arm_smmu_detach_dev(dev);
>>> +    atomic_dec(&domain->ref);
>>> +
>>> +    if (domain->ref.counter == 0)
>>> +        arm_smmu_destroy_iommu_domain(domain);
>>> +
>>> +    spin_unlock(&xen_domain->lock);
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
>>> +                 u8 devfn,  struct device *dev)
>>> +{
>>> +    int ret = 0;
>>> +
>>> +    /* Don't allow remapping on other domain than hwdom */
>>> +    if (t && t != hardware_domain)
>>> +        return -EPERM;
>>> +
>>> +    if (t == s)
>>> +        return 0;
>>> +
>>> +    ret = arm_smmu_deassign_dev(s, dev);
>>> +    if (ret)
>>> +        return ret;
>>> +
>>> +    if (t) {
>>> +        /* No flags are defined for ARM. */
>>> +        ret = arm_smmu_assign_dev(t, devfn, dev, 0);
>>> +        if (ret)
>>> +            return ret;
>>> +    }
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +static int arm_smmu_iommu_domain_init(struct domain *d)
>>> +{
>>> +    struct arm_smmu_xen_domain *xen_domain;
>>> +
>>> +    xen_domain = xzalloc(struct arm_smmu_xen_domain);
>>> +    if (!xen_domain)
>>> +        return -ENOMEM;
>>> +
>>> +    spin_lock_init(&xen_domain->lock);
>>> +    INIT_LIST_HEAD(&xen_domain->contexts);
>>> +
>>> +    dom_iommu(d)->arch.priv = xen_domain;
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
>>> +{
>>> +}
>>> +
>>> +static void arm_smmu_iommu_domain_teardown(struct domain *d)
>>> +{
>>> +    struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
>>> +
>>> +    ASSERT(list_empty(&xen_domain->contexts));
>>> +    xfree(xen_domain);
>>> +}
>>> +
>>> +static int __must_check arm_smmu_map_page(struct domain *d, 
>>> unsigned long gfn,
>>> +            unsigned long mfn, unsigned int flags)
>>> +{
>>> +    p2m_type_t t;
>>> +
>>> +    /*
>>> +     * Grant mappings can be used for DMA requests. The dev_bus_addr
>>> +     * returned by the hypercall is the MFN (not the IPA). For device
>>> +     * protected by an IOMMU, Xen needs to add a 1:1 mapping in the 
>>> domain
>>> +     * p2m to allow DMA request to work.
>>> +     * This is only valid when the domain is directed mapped. Hence 
>>> this
>>> +     * function should only be used by gnttab code with gfn == mfn.
>>> +     */
>>> +    BUG_ON(!is_domain_direct_mapped(d));
>>> +    BUG_ON(mfn != gfn);
>>> +
>>> +    /* We only support readable and writable flags */
>>> +    if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
>>> +        return -EINVAL;
>>> +
>>> +    t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw : 
>>> p2m_iommu_map_ro;
>>> +
>>> +    /*
>>> +     * The function guest_physmap_add_entry replaces the current 
>>> mapping
>>> +     * if there is already one...
>>> +     */
>>> +    return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
>>> +}
>>> +
>>> +static int __must_check arm_smmu_unmap_page(struct domain *d, 
>>> unsigned long gfn)
>>> +{
>>> +    /*
>>> +     * This function should only be used by gnttab code when the 
>>> domain
>>> +     * is direct mapped
>>> +     */
>>> +    if (!is_domain_direct_mapped(d))
>>> +        return -EINVAL;
>>> +
>>> +    return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
>>> +}
>>> +
>>> +static const struct iommu_ops arm_smmu_iommu_ops = {
>>> +    .init = arm_smmu_iommu_domain_init,
>>> +    .hwdom_init = arm_smmu_iommu_hwdom_init,
>>> +    .teardown = arm_smmu_iommu_domain_teardown,
>>> +    .iotlb_flush = arm_smmu_iotlb_flush,
>>> +    .iotlb_flush_all = arm_smmu_iotlb_flush_all,
>>> +    .assign_device = arm_smmu_assign_dev,
>>> +    .reassign_device = arm_smmu_reassign_dev,
>>> +    .map_page = arm_smmu_map_page,
>>> +    .unmap_page = arm_smmu_unmap_page,
>>> +};
>>> +
>>> +static
>>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle 
>>> *fwnode)
>>> +{
>>> +    struct arm_smmu_device *smmu = NULL;
>>> +
>>> +    spin_lock(&arm_smmu_devices_lock);
>>> +    list_for_each_entry(smmu, &arm_smmu_devices, devices) {
>>> +        if (smmu->dev->fwnode == fwnode)
>>> +            break;
>>> +    }
>>> +    spin_unlock(&arm_smmu_devices_lock);
>>> +
>>> +    return smmu;
>>> +}
>>> +
>>> +static __init int arm_smmu_dt_init(struct dt_device_node *dev,
>>> +                   const void *data)
>>> +{
>>> +    int rc;
>>> +
>>> +    /*
>>> +     * Even if the device can't be initialized, we don't want to
>>> +     * give the SMMU device to dom0.
>>> +     */
>>> +    dt_device_set_used_by(dev, DOMID_XEN);
>>> +
>>> +    rc = arm_smmu_device_probe(dt_to_dev(dev));
>>> +    if (rc)
>>> +        return rc;
>>> +
>>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>>> +    .dt_match = arm_smmu_of_match,
>>> +    .init = arm_smmu_dt_init,
>>> +DT_DEVICE_END
>>> +
>>> +#ifdef CONFIG_ACPI
>>> +/* Set up the IOMMU */
>>> +static int __init arm_smmu_acpi_init(const void *data)
>>> +{
>>> +    int rc;
>>> +
>>> +    rc = arm_smmu_device_probe((struct device *)data);
>>> +    if (rc)
>>> +        return rc;
>>> +
>>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>>> +    return 0;
>>> +}
>>> +
>>> +ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>>> +    .class_type = ACPI_IORT_NODE_SMMU_V3,
>>> +    .init = arm_smmu_acpi_init,
>>> +ACPI_DEVICE_END
>>> +
>>> +#endif
>>> diff --git a/xen/include/xen/linux_compat.h 
>>> b/xen/include/xen/linux_compat.h
>>> new file mode 100644
>>> index 0000000000..8037be0a3e
>>> --- /dev/null
>>> +++ b/xen/include/xen/linux_compat.h
>>> @@ -0,0 +1,84 @@
>>> +/****************************************************************************** 
>>>
>>> + * include/xen/linux_compat.h
>>> + *
>>> + * Compatibility defines for porting code from Linux to Xen
>>> + *
>>> + * Copyright (c) 2017 Linaro Limited
>>> + *
>>> + * This program is free software; you can redistribute it and/or 
>>> modify
>>> + * it under the terms of the GNU General Public License as 
>>> published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public License
>>> + * along with this program; If not, see 
>>> <http://www.gnu.org/licenses/>.
>>> + */
>>> +
>>> +#ifndef __XEN_LINUX_COMPAT_H__
>>> +#define __XEN_LINUX_COMPAT_H__
>>> +
>>> +#include <asm/types.h>
>>> +
>>> +typedef paddr_t phys_addr_t;
>>> +typedef paddr_t dma_addr_t;
>>> +
>>> +typedef unsigned int gfp_t;
>>> +#define GFP_KERNEL 0
>>> +#define __GFP_ZERO 0x01U
>>> +
>>> +/* Helpers for IRQ functions */
>>> +#define free_irq release_irq
>>> +
>>> +enum irqreturn {
>>> +    IRQ_NONE,
>>> +    IRQ_HANDLED,
>>> +    IRQ_WAKE_THREAD,
>>> +};
>>> +
>>> +typedef enum irqreturn irqreturn_t;
>>> +
>>> +/* Device logger functions */
>>> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## 
>>> __VA_ARGS__)
>>> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## 
>>> __VA_ARGS__)
>>> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## 
>>> __VA_ARGS__)
>>> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>>> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## 
>>> __VA_ARGS__)
>>> +
>>> +#define dev_err_ratelimited(dev, fmt, ...)                  \
>>> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>>> +
>>> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
>>> +
>>> +/* Alias to Xen allocation helpers */
>>> +#define kfree xfree
>>> +#define kmalloc(size, flags) ({\
>>> +    void *__ret_alloc = NULL; \
>>> +    if (flags & __GFP_ZERO) \
>>> +        __ret_alloc = _xzalloc(size, sizeof(void *)); \
>>> +    else \
>>> +        __ret_alloc = _xmalloc(size, sizeof(void *)); \
>>> +    __ret_alloc; \
>>> +})
>>> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
>>> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
>>> +#define kmalloc_array(size, n, flags) ({\
>>> +    void *__ret_alloc = NULL; \
>>> +    if (flags & __GFP_ZERO) \
>>> +        __ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
>>> +    else \
>>> +        __ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
>>> +    __ret_alloc; \
>>> +})
>>> +
>>> +/* Alias to Xen time functions */
>>> +#define ktime_t s_time_t
>>> +#define ktime_get()             (NOW())
>>> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
>>> +#define ktime_compare(t,i)      (t > (i))
>>> +
>>> +#endif /* __XEN_LINUX_COMPAT_H__ */
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xenproject.org
>> https://lists.xenproject.org/mailman/listinfo/xen-devel
>


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Julien Grall]

On 09/05/2018 09:30, Manish Jaggi wrote:
> 
> 
> On 04/19/2018 04:24 PM, Manish Jaggi wrote:
>> Sorry for top posting,
>>
>> is someone working on the comments on this patch?
>>
>> -Manish
>>
> If no one is working this code anymore, I would like to pick it up and 
> continue maintaining it.
> Is it fine with all?

Last time I spoke with Sameer he was planning to resend a series. And I 
would prefer if he continue to lead the series unless stated otherwise.

Cheers,

> 
> -Regards
> Manish
>>
>> On 03/10/2018 11:23 PM, Manish Jaggi wrote:
>>> Hi Sameer,
>>>
>>>
>>> On 02/09/2018 08:40 AM, Sameer Goel wrote:
>>>> This driver follows an approach similar to smmu driver. The intent here
>>>> is to reuse as much Linux code as possible.
>>>> - Glue code has been introduced to bridge the API calls.
>>>> - Called Linux functions from the Xen IOMMU function calls.
>>>> - Xen modifications are preceded by /*Xen: comment */
>>>> - xen/linux_compat: Add a Linux compat header
>>>>    For porting files directly from Linux it is useful to have a 
>>>> function mapping
>>>>    definitions from Linux to Xen. This file adds common API 
>>>> functions and
>>>>    other defines that are needed for porting arm SMMU drivers.
>>>>
>>>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>>>> ---
>>>>   xen/arch/arm/p2m.c                    |   1 +
>>>>   xen/drivers/Kconfig                   |   2 +
>>>>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>>>>   xen/drivers/passthrough/arm/Makefile  |   1 +
>>>>   xen/drivers/passthrough/arm/smmu-v3.c | 892 
>>>> ++++++++++++++++++++++++++++++++--
>>>>   xen/include/xen/linux_compat.h        |  84 ++++
>>>>   6 files changed, 959 insertions(+), 29 deletions(-)
>>>>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>>>>   create mode 100644 xen/include/xen/linux_compat.h
>>>>
>>>> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
>>>> index 65e8b9c6ea..fef7605fd6 100644
>>>> --- a/xen/arch/arm/p2m.c
>>>> +++ b/xen/arch/arm/p2m.c
>>>> @@ -1460,6 +1460,7 @@ err:
>>>>   static void __init setup_virt_paging_one(void *data)
>>>>   {
>>>>       unsigned long val = (unsigned long)data;
>>>> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>>>>       WRITE_SYSREG32(val, VTCR_EL2);
>>>>       isb();
>>>>   }
>>>> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
>>>> index bc3a54f0ea..612655386d 100644
>>>> --- a/xen/drivers/Kconfig
>>>> +++ b/xen/drivers/Kconfig
>>>> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>>>>     source "drivers/video/Kconfig"
>>>>   +source "drivers/passthrough/arm/Kconfig"
>>>> +
>>>>   endmenu
>>>> diff --git a/xen/drivers/passthrough/arm/Kconfig 
>>>> b/xen/drivers/passthrough/arm/Kconfig
>>>> new file mode 100644
>>>> index 0000000000..cda899f608
>>>> --- /dev/null
>>>> +++ b/xen/drivers/passthrough/arm/Kconfig
>>>> @@ -0,0 +1,8 @@
>>>> +
>>>> +config ARM_SMMU_v3
>>>> +    bool "ARM SMMUv3 Support"
>>>> +    depends on ARM_64
>>>> +    help
>>>> +     Support for implementations of the ARM System MMU architecture
>>>> +     version 3.
>>>> +
>>>> diff --git a/xen/drivers/passthrough/arm/Makefile 
>>>> b/xen/drivers/passthrough/arm/Makefile
>>>> index f4cd26e15d..e14732b55c 100644
>>>> --- a/xen/drivers/passthrough/arm/Makefile
>>>> +++ b/xen/drivers/passthrough/arm/Makefile
>>>> @@ -1,2 +1,3 @@
>>>>   obj-y += iommu.o
>>>>   obj-y += smmu.o
>>>> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
>>>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c 
>>>> b/xen/drivers/passthrough/arm/smmu-v3.c
>>>> index e67ba6c40f..f43485fe6e 100644
>>>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>>>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>>>> @@ -18,28 +18,414 @@
>>>>    * Author: Will Deacon <will.deacon@arm.com>
>>>>    *
>>>>    * This driver is powered by bad coffee and bombay mix.
>>>> + *
>>>> + *
>>>> + * Based on Linux drivers/iommu/arm-smmu-v3.c
>>>> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
>>>> + *
>>>> + * Xen modifications:
>>>> + * Sameer Goel <sameer.goel@linaro.org>
>>>> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
>>>> + *
>>>> + */
>>>> +
>>>> +#include <xen/acpi.h>
>>>> +#include <xen/config.h>
>>>> +#include <xen/delay.h>
>>>> +#include <xen/errno.h>
>>>> +#include <xen/err.h>
>>>> +#include <xen/irq.h>
>>>> +#include <xen/lib.h>
>>>> +#include <xen/linux_compat.h>
>>>> +#include <xen/list.h>
>>>> +#include <xen/mm.h>
>>>> +#include <xen/rbtree.h>
>>>> +#include <xen/sched.h>
>>>> +#include <xen/sizes.h>
>>>> +#include <xen/vmap.h>
>>>> +#include <acpi/acpi_iort.h>
>>>> +#include <asm/atomic.h>
>>>> +#include <asm/device.h>
>>>> +#include <asm/io.h>
>>>> +#include <asm/platform.h>
>>>> +
>>>> +/* Alias to Xen device tree helpers */
>>>> +#define device_node dt_device_node
>>>> +#define of_phandle_args dt_phandle_args
>>>> +#define of_device_id dt_device_match
>>>> +#define of_match_node dt_match_node
>>>> +#define of_property_read_u32(np, pname, out) 
>>>> (!dt_property_read_u32(np, pname, out))
>>>> +#define of_property_read_bool dt_property_read_bool
>>>> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
>>>> +
>>>> +/* Xen: Helpers to get device MMIO and IRQs */
>>>> +struct resource {
>>>> +    u64 addr;
>>>> +    u64 size;
>>>> +    unsigned int type;
>>>> +};
>>>> +
>>>> +#define resource_size(res) ((res)->size)
>>>> +
>>>> +#define platform_device device
>>>> +
>>>> +#define IORESOURCE_MEM 0
>>>> +#define IORESOURCE_IRQ 1
>>>> +
>>>> +static struct resource *platform_get_resource(struct 
>>>> platform_device *pdev,
>>>> +                          unsigned int type,
>>>> +                          unsigned int num)
>>>> +{
>>>> +    /*
>>>> +     * The resource is only used between 2 calls of 
>>>> platform_get_resource.
>>>> +     * It's quite ugly but it's avoid to add too much code in the part
>>>> +     * imported from Linux
>>>> +     */
>>>> +    static struct resource res;
>>>> +    struct acpi_iort_node *iort_node;
>>>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>>>> +    int ret = 0;
>>>> +
>>>> +    res.type = type;
>>>> +
>>>> +    switch (type) {
>>>> +    case IORESOURCE_MEM:
>>>> +        if (pdev->type == DEV_ACPI) {
>>>> +            ret = 1;
>>>> +            iort_node = pdev->acpi_node;
>>>> +            node_smmu_data =
>>>> +                (struct acpi_iort_smmu_v3 *)iort_node->node_data;
>>>> +
>>>> +            if (node_smmu_data != NULL) {
>>>> +                res.addr = node_smmu_data->base_address;
>>>> +                res.size = SZ_128K;
>>>> +                ret = 0;
>>>> +            }
>>>> +        } else {
>>>> +            ret = dt_device_get_address(dev_to_dt(pdev), num,
>>>> +                            &res.addr, &res.size);
>>>> +        }
>>>> +
>>>> +        return ((ret) ? NULL : &res);
>>>> +
>>>> +    case IORESOURCE_IRQ:
>>>> +        /* ACPI case not implemented as there is no use case for it */
>>>> +        ret = platform_get_irq(dev_to_dt(pdev), num);
>>>> +
>>>> +        if (ret < 0)
>>>> +            return NULL;
>>>> +
>>>> +        res.addr = ret;
>>>> +        res.size = 1;
>>>> +
>>>> +        return &res;
>>>> +
>>>> +    default:
>>>> +        return NULL;
>>>> +    }
>>>> +}
>>>> +
>>>> +static int platform_get_irq_byname(struct platform_device *pdev, 
>>>> const char *name)
>>>> +{
>>>> +    const struct dt_property *dtprop;
>>>> +    struct acpi_iort_node *iort_node;
>>>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>>>> +    int ret = 0;
>>>> +
>>>> +    if (pdev->type == DEV_ACPI) {
>>>> +        iort_node = pdev->acpi_node;
>>>> +        node_smmu_data = (struct acpi_iort_smmu_v3 
>>>> *)iort_node->node_data;
>>>> +
>>>> +        if (node_smmu_data != NULL) {
>>>> +            if (!strcmp(name, "eventq"))
>>>> +                ret = node_smmu_data->event_gsiv;
>>>> +            else if (!strcmp(name, "priq"))
>>>> +                ret = node_smmu_data->pri_gsiv;
>>>> +            else if (!strcmp(name, "cmdq-sync"))
>>>> +                ret = node_smmu_data->sync_gsiv;
>>>> +            else if (!strcmp(name, "gerror"))
>>>> +                ret = node_smmu_data->gerr_gsiv;
>>>> +            else
>>>> +                ret = -EINVAL;
>>>> +        }
>>>> +    } else {
>>>> +        dtprop = dt_find_property(dev_to_dt(pdev), 
>>>> "interrupt-names", NULL);
>>>> +        if (!dtprop)
>>>> +            return -EINVAL;
>>>> +
>>>> +        if (!dtprop->value)
>>>> +            return -ENODATA;
>>>> +    }
>>>> +
>>>> +    return ret;
>>>> +}
>>>> +
>>>> +/*
>>>> + * Xen: Helpers for DMA allocation. Just the function name is 
>>>> reused for
>>>> + * porting code these allocation are not managed allocations
>>>>    */
>>>>   -#include <linux/acpi.h>
>>>> -#include <linux/acpi_iort.h>
>>>> -#include <linux/delay.h>
>>>> -#include <linux/dma-iommu.h>
>>>> -#include <linux/err.h>
>>>> -#include <linux/interrupt.h>
>>>> -#include <linux/iommu.h>
>>>> -#include <linux/iopoll.h>
>>>> -#include <linux/module.h>
>>>> -#include <linux/msi.h>
>>>> -#include <linux/of.h>
>>>> -#include <linux/of_address.h>
>>>> -#include <linux/of_iommu.h>
>>>> -#include <linux/of_platform.h>
>>>> -#include <linux/pci.h>
>>>> -#include <linux/platform_device.h>
>>>> -
>>>> -#include <linux/amba/bus.h>
>>>> -
>>>> -#include "io-pgtable.h"
>>>> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
>>>> +               dma_addr_t *dma_handle, gfp_t gfp)
>>>> +{
>>>> +    void *vaddr;
>>>> +    unsigned long alignment = size;
>>>> +
>>>> +    /*
>>>> +     * _xzalloc requires that the (align & (align -1)) = 0. Most of 
>>>> the
>>>> +     * allocations in SMMU code should send the right value for 
>>>> size. In
>>>> +     * case this is not true print a warning and align to the size 
>>>> of a
>>>> +     * (void *)
>>>> +     */
>>>> +    if (size & (size - 1)) {
>>>> +        dev_warn(dev, "Fixing alignment for the DMA buffer\n");
>>>> +        alignment = sizeof(void *);
>>>> +    }
>>>> +
>>>> +    vaddr = _xzalloc(size, alignment);
>>>> +    if (!vaddr) {
>>>> +        dev_err(dev, "DMA allocation failed\n");
>>>> +        return NULL;
>>>> +    }
>>>> +
>>>> +    *dma_handle = virt_to_maddr(vaddr);
>>>> +
>>>> +    return vaddr;
>>>> +}
>>>> +
>>>> +
>>>> +static void dmam_free_coherent(struct device *dev, size_t size, 
>>>> void *vaddr,
>>>> +            dma_addr_t dma_handle)
>>>> +{
>>>> +    xfree(vaddr);
>>>> +}
>>>> +
>>>> +/* Xen: Stub out DMA domain related functions */
>>>> +#define iommu_get_dma_cookie(dom) 0
>>>> +#define iommu_put_dma_cookie(dom)
>>>> +
>>>> +/* Xen: Stub out module param related function */
>>>> +#define module_param_named(a, b, c, d)
>>>> +#define MODULE_PARM_DESC(a, b)
>>>> +
>>>> +#define dma_set_mask_and_coherent(d, b) 0
>>>> +
>>>> +#define of_dma_is_coherent(n) 0
>>>> +
>>>> +#define MODULE_DEVICE_TABLE(type, name)
>>>> +
>>>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>>>> +                       struct resource *res)
>>>> +{
>>>> +    void __iomem *ptr;
>>>> +
>>>> +    if (!res || res->type != IORESOURCE_MEM) {
>>>> +        dev_err(dev, "Invalid resource\n");
>>>> +        return ERR_PTR(-EINVAL);
>>>> +    }
>>>> +
>>>> +    ptr = ioremap_nocache(res->addr, res->size);
>>>> +    if (!ptr) {
>>>> +        dev_err(dev,
>>>> +            "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
>>>> +            res->addr, res->size);
>>>> +        return ERR_PTR(-ENOMEM);
>>>> +    }
>>>> +
>>>> +    return ptr;
>>>> +}
>>>> +
>>>> +/* Xen: Compatibility define for iommu_domain_geometry.*/
>>>> +struct iommu_domain_geometry {
>>>> +    dma_addr_t aperture_start; /* First address that can be 
>>>> mapped    */
>>>> +    dma_addr_t aperture_end;   /* Last address that can be 
>>>> mapped     */
>>>> +    bool force_aperture;       /* DMA only allowed in mappable 
>>>> range? */
>>>> +};
>>>> +
>>>> +
>>>> +/* Xen: Type definitions for iommu_domain */
>>>> +#define IOMMU_DOMAIN_UNMANAGED 0
>>>> +#define IOMMU_DOMAIN_DMA 1
>>>> +#define IOMMU_DOMAIN_IDENTITY 2
>>>> +
>>>> +/* Xen: Dummy iommu_domain */
>>>> +struct iommu_domain {
>>>> +    /* Runtime SMMU configuration for this iommu_domain */
>>>> +    struct arm_smmu_domain        *priv;
>>>> +    unsigned int type;
>>>> +
>>>> +    /* Dummy compatibility defines */
>>>> +    unsigned long pgsize_bitmap;
>>>> +    struct iommu_domain_geometry geometry;
>>>> +
>>>> +    atomic_t ref;
>>>> +    /*
>>>> +     * Used to link iommu_domain contexts for a same domain.
>>>> +     * There is at least one per-SMMU to used by the domain.
>>>> +     */
>>>> +    struct list_head        list;
>>>> +};
>>>> +
>>>> +/* Xen: Describes information required for a Xen domain */
>>>> +struct arm_smmu_xen_domain {
>>>> +    spinlock_t            lock;
>>>> +    /* List of iommu domains associated to this domain */
>>>> +    struct list_head        contexts;
>>>> +};
>>>> +
>>>> +/*
>>>> + * Xen: Information about each device stored in dev->archdata.iommu
>>>> + *
>>>> + * The dev->archdata.iommu stores the iommu_domain (runtime 
>>>> configuration of
>>>> + * the SMMU).
>>>> + */
>>>> +struct arm_smmu_xen_device {
>>>> +    struct iommu_domain *domain;
>>>> +};
>>>> +
>>>> +/*
>>>> + * Xen: io_pgtable compatibility defines.
>>>> + * Most of these are to port in the S1 translation code as is.
>>>> + */
>>>> +struct io_pgtable_ops {
>>>> +};
>>>> +
>>>> +struct iommu_gather_ops {
>>>> +    void (*tlb_flush_all)(void *cookie);
>>>> +    void (*tlb_add_flush)(unsigned long iova, size_t size, size_t 
>>>> granule,
>>>> +                  bool leaf, void *cookie);
>>>> +    void (*tlb_sync)(void *cookie);
>>>> +};
>>>> +
>>>> +struct io_pgtable_cfg {
>>>> +    /*
>>>> +     * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE 
>>>> bits in
>>>> +     *    stage 1 PTEs, for hardware which insists on validating them
>>>> +     *    even in    non-secure state where they should normally be 
>>>> ignored.
>>>> +     *
>>>> +     * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, 
>>>> IOMMU_WRITE and
>>>> +     *    IOMMU_NOEXEC flags and map everything with full access, for
>>>> +     *    hardware which does not implement the permissions of a given
>>>> +     *    format, and/or requires some format-specific default value.
>>>> +     *
>>>> +     * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching 
>>>> invalid
>>>> +     *    (unmapped) entries but the hardware might do so anyway, 
>>>> perform
>>>> +     *    TLB maintenance when mapping as well as when unmapping.
>>>> +     *
>>>> +     * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
>>>> +     *    PTEs, for Mediatek IOMMUs which treat it as a 33rd 
>>>> address bit
>>>> +     *    when the SoC is in "4GB mode" and they can only access 
>>>> the high
>>>> +     *    remap of DRAM (0x1_00000000 to 0x1_ffffffff).
>>>> +     *
>>>> +     * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will 
>>>> only ever
>>>> +     *    be accessed by a fully cache-coherent IOMMU or CPU (e.g. 
>>>> for a
>>>> +     *    software-emulated IOMMU), such that pagetable updates 
>>>> need not
>>>> +     *    be treated as explicit DMA data.
>>>> +     */
>>>> +    #define IO_PGTABLE_QUIRK_ARM_NS        BIT(0)
>>>> +    #define IO_PGTABLE_QUIRK_NO_PERMS    BIT(1)
>>>> +    #define IO_PGTABLE_QUIRK_TLBI_ON_MAP    BIT(2)
>>>> +    #define IO_PGTABLE_QUIRK_ARM_MTK_4GB    BIT(3)
>>>> +    #define IO_PGTABLE_QUIRK_NO_DMA        BIT(4)
>>>> +    unsigned long            quirks;
>>>> +    unsigned long            pgsize_bitmap;
>>>> +    unsigned int            ias;
>>>> +    unsigned int            oas;
>>>> +    const struct iommu_gather_ops    *tlb;
>>>> +    struct device            *iommu_dev;
>>>> +
>>>> +    /* Low-level data specific to the table format */
>>>> +    union {
>>>> +        struct {
>>>> +            u64    ttbr[2];
>>>> +            u64    tcr;
>>>> +            u64    mair[2];
>>>> +        } arm_lpae_s1_cfg;
>>>> +
>>>> +        struct {
>>>> +            u64    vttbr;
>>>> +            u64    vtcr;
>>>> +        } arm_lpae_s2_cfg;
>>>> +
>>>> +        struct {
>>>> +            u32    ttbr[2];
>>>> +            u32    tcr;
>>>> +            u32    nmrr;
>>>> +            u32    prrr;
>>>> +        } arm_v7s_cfg;
>>>> +    };
>>>> +};
>>>> +
>>>> +enum io_pgtable_fmt {
>>>> +    ARM_32_LPAE_S1,
>>>> +    ARM_32_LPAE_S2,
>>>> +    ARM_64_LPAE_S1,
>>>> +    ARM_64_LPAE_S2,
>>>> +    ARM_V7S,
>>>> +    IO_PGTABLE_NUM_FMTS,
>>>> +};
>>>> +
>>>> +/*
>>>> + * Xen: The pgtable_ops are used by the S1 translations, so return 
>>>> the dummy
>>>> + * address.
>>>> + */
>>>> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
>>> Is this correct? it will make the caller null check fail
>>>> +#define free_io_pgtable_ops(o)
>>>> +
>>>> +/* Xen: Define wrapper for requesting IRQs */
>>>> +#define IRQF_ONESHOT 0
>>>> +
>>>> +typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
>>>> +
>>>> +static inline int devm_request_irq(struct device *dev, unsigned int 
>>>> irq,
>>>> +                   irq_handler_t handler, unsigned long irqflags,
>>>> +                   const char *devname, void *dev_id)
>>>> +{
>>>> +    /*
>>>> +     * SMMUv3 implementation can support wired interrupt outputs 
>>>> that are
>>>> +     * edge-triggered. Set the irq type as per the spec.
>>>> +     */
>>>> +    irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
>>>> +    return request_irq(irq, irqflags, handler, devname, dev_id);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Xen does not have a concept of threaded irq, but eventually we 
>>>> can use
>>>> + * tasklets to optimize the following function.
>>>> + */
>>>> +int devm_request_threaded_irq(struct device *dev, unsigned int irq, 
>>>> irq_handler_t handler,
>>>> +                  irq_handler_t thread_fn, unsigned long irqflags,
>>>> +                  const char *devname, void *dev_id)
>>>> +{
>>>> +    return devm_request_irq(dev, irq, thread_fn, irqflags, devname, 
>>>> dev_id);
>>>> +}
>>>> +
>>>> +/* Xen: The mutex is used only during initialization so the 
>>>> typecast is safe */
>>>> +#define mutex spinlock
>>>> +#define mutex_init spin_lock_init
>>>> +#define mutex_lock spin_lock
>>>> +#define mutex_unlock spin_unlock
>>>> +
>>>> +#define readx_poll_timeout(op, addr, val, cond, sleep_us, 
>>>> timeout_us) \
>>>> +({ \
>>>> +    s_time_t deadline = NOW() + MICROSECS(timeout_us); \
>>>> +    for (;;) { \
>>>> +        (val) = op(addr); \
>>>> +        if (cond) \
>>>> +            break; \
>>>> +        if (NOW() > deadline) { \
>>>> +            (val) = op(addr); \
>>>> +            break; \
>>>> +        } \
>>>> +    udelay(sleep_us); \
>>>> +    } \
>>>> +    (cond) ? 0 : -ETIMEDOUT; \
>>>> +})
>>>> +
>>>> +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, 
>>>> timeout_us) \
>>>> +    readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, 
>>>> timeout_us)
>>>> +
>>>> +#define VA_BITS 0 /* Only needed for S1 translations */
>>>>     /* MMIO registers */
>>>>   #define ARM_SMMU_IDR0            0x0
>>>> @@ -433,6 +819,7 @@ enum pri_resp {
>>>>       PRI_RESP_SUCC,
>>>>   };
>>>>   +#if 0 /* Xen: No MSI support in this iteration */
>>>>   enum arm_smmu_msi_index {
>>>>       EVTQ_MSI_INDEX,
>>>>       GERROR_MSI_INDEX,
>>>> @@ -457,6 +844,7 @@ static phys_addr_t 
>>>> arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
>>>>           ARM_SMMU_PRIQ_IRQ_CFG2,
>>>>       },
>>>>   };
>>>> +#endif
>>>>     struct arm_smmu_cmdq_ent {
>>>>       /* Common fields */
>>>> @@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
>>>>       u16                vmid;
>>>>       u64                vttbr;
>>>>       u64                vtcr;
>>>> +    /* Xen: Domain associated to this configuration */
>>>> +    struct domain            *domain;
>>>>   };
>>>>     struct arm_smmu_strtab_ent {
>>>> @@ -635,9 +1025,21 @@ struct arm_smmu_device {
>>>>       struct arm_smmu_strtab_cfg    strtab_cfg;
>>>>         /* IOMMU core code handle */
>>>> +#if 0 /*Xen: Generic iommu_device ref not needed here */
>>>>       struct iommu_device        iommu;
>>>> +#endif
>>>> +    /* Xen: Need to keep a list of SMMU devices */
>>>> +    struct list_head                devices;
>>>>   };
>>>>   +/* Xen: Keep a list of devices associated with this driver */
>>>> +static DEFINE_SPINLOCK(arm_smmu_devices_lock);
>>>> +static LIST_HEAD(arm_smmu_devices);
>>>> +/* Xen: Helper for finding a device using fwnode */
>>>> +static
>>>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle 
>>>> *fwnode);
>>>> +
>>>> +
>>>>   /* SMMU private data for each master */
>>>>   struct arm_smmu_master_data {
>>>>       struct arm_smmu_device        *smmu;
>>>> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct 
>>>> arm_smmu_device *smmu, u64 *evt)
>>>>         dev_info(smmu->dev, "unexpected PRI request received:\n");
>>>>       dev_info(smmu->dev,
>>>> -         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at 
>>>> iova 0x%016llx\n",
>>>> +         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at 
>>>> iova %#" PRIx64 "\n",
>>>>            sid, ssid, grpid, last ? "L" : "",
>>>>            evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>>>>            evt[0] & PRIQ_0_PERM_READ ? "R" : "",
>>>> @@ -1346,6 +1748,8 @@ static irqreturn_t 
>>>> arm_smmu_combined_irq_handler(int irq, void *dev)
>>>>   {
>>>>       arm_smmu_gerror_handler(irq, dev);
>>>>       arm_smmu_cmdq_sync_handler(irq, dev);
>>>> +    /*Xen: No threaded irq. So call the required function from here */
>>>> +    arm_smmu_combined_irq_thread(irq, dev);
>>>>       return IRQ_WAKE_THREAD;
>>>>   }
>>>>   @@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct 
>>>> arm_smmu_device *smmu)
>>>>       arm_smmu_cmdq_issue_cmd(smmu, &cmd);
>>>>   }
>>>>   +/*
>>>> + * Xen: Define the IRQ handlers for xen. The linux functions would be
>>>> + * modified to use the functions defined in the following code.
>>>> + */
>>>> +static void arm_smmu_evtq_thread_xen(int irq, void *dev,
>>>> +                       struct cpu_user_regs *regs)
>>>> +{
>>>> +    arm_smmu_evtq_thread(irq, dev);
>>>> +}
>>>> +
>>>> +static void arm_smmu_priq_thread_xen(int irq, void *dev,
>>>> +                       struct cpu_user_regs *regs)
>>>> +{
>>>> +    arm_smmu_priq_thread(irq, dev);
>>>> +}
>>>> +
>>>> +static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
>>>> +                       struct cpu_user_regs *regs)
>>>> +{
>>>> +    arm_smmu_cmdq_sync_handler(irq, dev);
>>>> +}
>>>> +
>>>> +static void arm_smmu_gerror_handler_xen(int irq, void *dev,
>>>> +                       struct cpu_user_regs *regs)
>>>> +{
>>>> +    arm_smmu_gerror_handler(irq, dev);
>>>> +}
>>>> +
>>>> +static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
>>>> +                       struct cpu_user_regs *regs)
>>>> +{
>>>> +    arm_smmu_combined_irq_handler(irq, dev);
>>>> +}
>>>> +
>>>> +#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
>>>> +#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
>>>> +#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
>>>> +#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
>>>> +#define arm_smmu_combined_irq_handler 
>>>> arm_smmu_combined_irq_handler_xen
>>>> +
>>>>   static void arm_smmu_tlb_sync(void *cookie)
>>>>   {
>>>>       struct arm_smmu_domain *smmu_domain = cookie;
>>>> @@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops 
>>>> arm_smmu_gather_ops = {
>>>>       .tlb_sync    = arm_smmu_tlb_sync,
>>>>   };
>>>>   +#if 0 /*Xen: Unused functionality */
>>>>   /* IOMMU API */
>>>>   static bool arm_smmu_capable(enum iommu_cap cap)
>>>>   {
>>>> @@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
>>>>           return false;
>>>>       }
>>>>   }
>>>> +#endif
>>>>     static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
>>>>   {
>>>> @@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct 
>>>> arm_smmu_domain *smmu_domain,
>>>>       if (vmid < 0)
>>>>           return vmid;
>>>>   -    cfg->vmid    = (u16)vmid;
>>>> -    cfg->vttbr    = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
>>>> -    cfg->vtcr    = pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
>>>> +    /*
>>>> +     * Xen: Get the ttbr and vtcr values
>>>> +     * vttbr: This is a shared value with the domain page table
>>>> +     * vtcr: The TCR settings are the same as CPU since the page
>>>> +     * tables are shared
>>>> +     */
>>>> +
>>>> +    cfg->vmid    = vmid;
>>>> +    cfg->vttbr    = page_to_maddr(cfg->domain->arch.p2m.root);
>>>> +    cfg->vtcr    = READ_SYSREG32(VTCR_EL2) & STRTAB_STE_2_VTCR_MASK;
>>>>       return 0;
>>>>   }
>>>>   @@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct 
>>>> iommu_domain *domain)
>>>>       if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
>>>>           pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
>>>>   +    /* Xen: pgtbl_ops gets an invalid address */
>>>>       pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
>>>>       if (!pgtbl_ops)
>>>>           return -ENOMEM;
>>> Will this not fail ?
>>>> @@ -1721,6 +2175,7 @@ out_unlock:
>>>>       return ret;
>>>>   }
>>>>   +#if 0 /* Xen: Unused functionality */
>>>>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long 
>>>> iova,
>>>>               phys_addr_t paddr, size_t size, int prot)
>>>>   {
>>>> @@ -1772,6 +2227,7 @@ struct arm_smmu_device 
>>>> *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>>>>       put_device(dev);
>>>>       return dev ? dev_get_drvdata(dev) : NULL;
>>>>   }
>>>> +#endif
>>>>     static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, 
>>>> u32 sid)
>>>>   {
>>>> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct 
>>>> arm_smmu_device *smmu, u32 sid)
>>>>       return sid < limit;
>>>>   }
>>>>   +/* Xen: Unused */
>>>> +#if 0
>>>>   static struct iommu_ops arm_smmu_ops;
>>>> +#endif
>>>> +
>>>> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
>>>> +static const struct iommu_ops arm_smmu_iommu_ops;
>>>> +#define arm_smmu_ops arm_smmu_iommu_ops
>>>>     static int arm_smmu_add_device(struct device *dev)
>>>>   {
>>>> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device 
>>>> *dev)
>>>>       struct arm_smmu_device *smmu;
>>>>       struct arm_smmu_master_data *master;
>>>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>>>> +#if 0 /*Xen: iommu_group is not needed */
>>>>       struct iommu_group *group;
>>>> +#endif
>>>>   +    /* Xen: fwspec->ops are not needed */
>>>>       if (!fwspec || fwspec->ops != &arm_smmu_ops)
>>>>           return -ENODEV;
>>>>       /*
>>>> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device 
>>>> *dev)
>>>>           }
>>>>       }
>>>>   +/*
>>>> + * Xen: Do not need an iommu group as the stream data is carried by 
>>>> the SMMU
>>>> + * master device object
>>>> + */
>>>> +#if 0
>>>>       group = iommu_group_get_for_dev(dev);
>>>>       if (!IS_ERR(group)) {
>>>>           iommu_group_put(group);
>>>> @@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device 
>>>> *dev)
>>>>       }
>>>>         return PTR_ERR_OR_ZERO(group);
>>>> +#endif
>>>> +    return 0;
>>>>   }
>>>>   +/*
>>>> + * Xen: We can potentially support this function and destroy a 
>>>> device. This
>>>> + * will be relevant for PCI hotplug. So, will be implemented as 
>>>> needed after
>>>> + * passthrough support is available.
>>>> + */
>>>> +#if 0
>>>>   static void arm_smmu_remove_device(struct device *dev)
>>>>   {
>>>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>>>> @@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
>>>>       .put_resv_regions    = arm_smmu_put_resv_regions,
>>>>       .pgsize_bitmap        = -1UL, /* Restricted during device 
>>>> attach */
>>>>   };
>>>> +#endif
>>>>     /* Probing and initialisation functions */
>>>>   static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
>>>> @@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct 
>>>> arm_smmu_device *smmu, u32 set, u32 clr)
>>>>                         1, ARM_SMMU_POLL_TIMEOUT_US);
>>>>   }
>>>>   +#if 0 /* Xen: There is no MSI support as yet */
>>>>   static void arm_smmu_free_msis(void *data)
>>>>   {
>>>>       struct device *dev = data;
>>>> @@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct 
>>>> arm_smmu_device *smmu)
>>>>       /* Add callback to free MSIs on teardown */
>>>>       devm_add_action(dev, arm_smmu_free_msis, dev);
>>>>   }
>>>> +#endif
>>>>     static void arm_smmu_setup_unique_irqs(struct arm_smmu_device 
>>>> *smmu)
>>>>   {
>>>>       int irq, ret;
>>>>   +#if 0 /*Xen: Cannot setup msis for now */
>>>>       arm_smmu_setup_msis(smmu);
>>>> +#endif
>>>>         /* Request interrupt lines */
>>>>       irq = smmu->evtq.q.irq;
>>>> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct 
>>>> arm_smmu_device *smmu)
>>>>            * Cavium ThunderX2 implementation doesn't not support unique
>>>>            * irq lines. Use single irq line for all the SMMUv3 
>>>> interrupts.
>>>>            */
>>>> -        ret = devm_request_threaded_irq(smmu->dev, irq,
>>>> +        /*
>>>> +         * Xen: Does not support threaded irqs, so serialise the 
>>>> setup.
>>>> +         * This is the same for pris and event interrupt lines on 
>>>> other
>>>> +         * systems
>>>> +         */
>>>> +        ret = devm_request_irq(smmu->dev, irq,
>>>>                       arm_smmu_combined_irq_handler,
>>>> -                    arm_smmu_combined_irq_thread,
>>>>                       IRQF_ONESHOT,
>>>>                       "arm-smmu-v3-combined-irq", smmu);
>>>>           if (ret < 0)
>>>> @@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct 
>>>> arm_smmu_device *smmu)
>>>>           smmu->features |= ARM_SMMU_FEAT_STALLS;
>>>>       }
>>>>   +/*
>>>> + * Xen: Block stage 1 translations. By doing this here we do not 
>>>> need to set the
>>>> + * domain->stage explicitly.
>>>> + */
>>>> +#if 0
>>>>       if (reg & IDR0_S1P)
>>>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
>>>> +#endif
>>>>         if (reg & IDR0_S2P)
>>>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
>>>> @@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct 
>>>> arm_smmu_device *smmu)
>>>>       if (reg & IDR5_GRAN4K)
>>>>           smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
>>>>   +#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
>>>>       if (arm_smmu_ops.pgsize_bitmap == -1UL)
>>>>           arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
>>>>       else
>>>>           arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
>>>> +#endif
>>>>         /* Output address size */
>>>>       switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
>>>> @@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct 
>>>> platform_device *pdev,
>>>>       struct device *dev = smmu->dev;
>>>>       struct acpi_iort_node *node;
>>>>   -    node = *(struct acpi_iort_node **)dev_get_platdata(dev);
>>>> +    /* Xen: Modification to get iort_node */
>>>> +    node = (struct acpi_iort_node *)dev->acpi_node;
>>>>         /* Retrieve SMMUv3 specific data */
>>>>       iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
>>>> @@ -2703,7 +3200,7 @@ static inline int 
>>>> arm_smmu_device_acpi_probe(struct platform_device *pdev,
>>>>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>>>                       struct arm_smmu_device *smmu)
>>>>   {
>>>> -    struct device *dev = &pdev->dev;
>>>> +    struct device *dev = pdev;
>>>>       u32 cells;
>>>>       int ret = -EINVAL;
>>>>   @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct 
>>>> platform_device *pdev,
>>>>         parse_driver_options(smmu);
>>>>   +    /* Xen: of_dma_is_coherent is a stub till dt support is 
>>>> introduced */
>>>>       if (of_dma_is_coherent(dev->of_node))
>>>>           smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>>>>   @@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct 
>>>> platform_device *pdev)
>>>>   {
>>>>       int irq, ret;
>>>>       struct resource *res;
>>>> +#if 0 /*Xen: Do not need to setup sysfs */
>>>>       resource_size_t ioaddr;
>>>> +#endif
>>>>       struct arm_smmu_device *smmu;
>>>> -    struct device *dev = &pdev->dev;
>>>> +    struct device *dev = pdev;/* Xen: dev is ignored */
>>>>       bool bypass;
>>>>         smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
>>>> @@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct 
>>>> platform_device *pdev)
>>>>           dev_err(dev, "MMIO region too small (%pr)\n", res);
>>>>           return -EINVAL;
>>>>       }
>>>> +#if 0 /*Xen: Do not need to setup sysfs */
>>>>       ioaddr = res->start;
>>>> +#endif
>>>>         smmu->base = devm_ioremap_resource(dev, res);
>>>>       if (IS_ERR(smmu->base))
>>>> @@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct 
>>>> platform_device *pdev)
>>>>           return ret;
>>>>         /* Record our private device structure */
>>>> +    /* Xen: SMMU is not treated a a platform device*/
>>>> +#if 0
>>>>       platform_set_drvdata(pdev, smmu);
>>>> +#endif
>>>>         /* Reset the device */
>>>>       ret = arm_smmu_device_reset(smmu, bypass);
>>>>       if (ret)
>>>>           return ret;
>>>>   +/* Xen: Not creating an IOMMU device list for Xen */
>>>> +#if 0
>>>>       /* And we're up. Go go go! */
>>>>       ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
>>>>                        "smmu3.%pa", &ioaddr);
>>>> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct 
>>>> platform_device *pdev)
>>>>           if (ret)
>>>>               return ret;
>>>>       }
>>>> +#endif
>>>> +    /*
>>>> +     * Xen: Keep a list of all probed devices. This will be used to 
>>>> query
>>>> +     * the smmu devices based on the fwnode.
>>>> +     */
>>>> +    INIT_LIST_HEAD(&smmu->devices);
>>>> +    spin_lock(&arm_smmu_devices_lock);
>>>> +    list_add(&smmu->devices, &arm_smmu_devices);
>>>> +    spin_unlock(&arm_smmu_devices_lock);
>>>>       return 0;
>>>>   }
>>>>   +/* Xen: Unused function */
>>>> +#if 0
>>>>   static int arm_smmu_device_remove(struct platform_device *pdev)
>>>>   {
>>>>       struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
>>>> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct 
>>>> platform_device *pdev)
>>>>   {
>>>>       arm_smmu_device_remove(pdev);
>>>>   }
>>>> +#endif
>>>> +
>>>>     static const struct of_device_id arm_smmu_of_match[] = {
>>>>       { .compatible = "arm,smmu-v3", },
>>>> @@ -2867,6 +3387,7 @@ static const struct of_device_id 
>>>> arm_smmu_of_match[] = {
>>>>   };
>>>>   MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>>>   +#if 0
>>>>   static struct platform_driver arm_smmu_driver = {
>>>>       .driver    = {
>>>>           .name        = "arm-smmu-v3",
>>>> @@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", 
>>>> NULL);
>>>>   MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 
>>>> implementations");
>>>>   MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
>>>>   MODULE_LICENSE("GPL v2");
>>>> +#endif
>>>> +
>>>> +/***** Start of Xen specific code *****/
>>>> +
>>>> +static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
>>>> +{
>>>> +    struct arm_smmu_xen_domain *smmu_domain = dom_iommu(d)->arch.priv;
>>>> +    struct iommu_domain *cfg;
>>>> +
>>>> +    spin_lock(&smmu_domain->lock);
>>>> +    list_for_each_entry(cfg, &smmu_domain->contexts, list) {
>>>> +        /*
>>>> +         * Only invalidate the context when SMMU is present.
>>>> +         * This is because the context initialization is delayed
>>>> +         * until a master has been added.
>>>> +         */
>>>> +        if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
>>>> +            continue;
>>>> +        arm_smmu_tlb_inv_context(cfg->priv);
>>>> +    }
>>>> +    spin_unlock(&smmu_domain->lock);
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +static int __must_check arm_smmu_iotlb_flush(struct domain *d,
>>>> +                         unsigned long gfn,
>>>> +                         unsigned int page_count)
>>>> +{
>>>> +    return arm_smmu_iotlb_flush_all(d);
>>>> +}
>>>> +
>>>> +static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
>>>> +                        struct device *dev)
>>>> +{
>>>> +    struct iommu_domain *domain;
>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>> +    struct arm_smmu_device *smmu;
>>>> +    struct arm_smmu_domain *smmu_domain;
>>>> +
>>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>>> +
>>>> +    smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
>>>> +    if (!smmu)
>>>> +        return NULL;
>>>> +
>>>> +    /*
>>>> +     * Loop through the &xen_domain->contexts to locate a context
>>>> +     * assigned to this SMMU
>>>> +     */
>>>> +    list_for_each_entry(domain, &xen_domain->contexts, list) {
>>>> +        smmu_domain = to_smmu_domain(domain);
>>>> +        if (smmu_domain->smmu == smmu)
>>>> +            return domain;
>>>> +    }
>>>> +
>>>> +    return NULL;
>>>> +}
>>>> +
>>>> +static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
>>>> +{
>>>> +    list_del(&domain->list);
>>>> +    arm_smmu_domain_free(domain);
>>>> +}
>>>> +
>>>> +static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
>>>> +                   struct device *dev, u32 flag)
>>>> +{
>>>> +    int ret = 0;
>>>> +    struct iommu_domain *domain;
>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>> +    struct arm_smmu_domain *arm_smmu;
>>>> +
>>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>>> +
>>>> +    if (!dev->archdata.iommu) {
>>>> +        dev->archdata.iommu = xzalloc(struct arm_smmu_xen_device);
>>>> +        if (!dev->archdata.iommu)
>>>> +            return -ENOMEM;
>>>> +    }
>>>> +
>>>> +    ret = arm_smmu_add_device(dev);
>>>> +    if (ret)
>>>> +        return ret;
>>>> +
>>>> +    spin_lock(&xen_domain->lock);
>>>> +
>>>> +    /*
>>>> +     * Check to see if an iommu_domain already exists for this xen 
>>>> domain
>>>> +     * under the same SMMU
>>>> +     */
>>>> +    domain = arm_smmu_get_domain(d, dev);
>>>> +    if (!domain) {
>>>> +
>>>> +        domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
>>>> +        if (!domain) {
>>>> +            ret = -ENOMEM;
>>>> +            goto out;
>>>> +        }
>>>> +
>>>> +        arm_smmu = to_smmu_domain(domain);
>>>> +        arm_smmu->s2_cfg.domain = d;
>>>> +
>>>> +        /* Chain the new context to the domain */
>>>> +        list_add(&domain->list, &xen_domain->contexts);
>>>> +
>>>> +    }
>>>> +
>>>> +    ret = arm_smmu_attach_dev(domain, dev);
>>>> +    if (ret) {
>>>> +        if (domain->ref.counter == 0)
>>>> +            arm_smmu_destroy_iommu_domain(domain);
>>>> +    } else {
>>>> +        atomic_inc(&domain->ref);
>>>> +    }
>>>> +
>>>> +out:
>>>> +    spin_unlock(&xen_domain->lock);
>>>> +    return ret;
>>>> +}
>>>> +
>>>> +static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
>>>> +{
>>>> +    struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>> +    struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
>>>> +
>>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>>> +
>>>> +    if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
>>>> +        dev_err(dev, " not attached to domain %d\n", d->domain_id);
>>>> +        return -ESRCH;
>>>> +    }
>>>> +
>>>> +    spin_lock(&xen_domain->lock);
>>>> +
>>>> +    arm_smmu_detach_dev(dev);
>>>> +    atomic_dec(&domain->ref);
>>>> +
>>>> +    if (domain->ref.counter == 0)
>>>> +        arm_smmu_destroy_iommu_domain(domain);
>>>> +
>>>> +    spin_unlock(&xen_domain->lock);
>>>> +
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
>>>> +                 u8 devfn,  struct device *dev)
>>>> +{
>>>> +    int ret = 0;
>>>> +
>>>> +    /* Don't allow remapping on other domain than hwdom */
>>>> +    if (t && t != hardware_domain)
>>>> +        return -EPERM;
>>>> +
>>>> +    if (t == s)
>>>> +        return 0;
>>>> +
>>>> +    ret = arm_smmu_deassign_dev(s, dev);
>>>> +    if (ret)
>>>> +        return ret;
>>>> +
>>>> +    if (t) {
>>>> +        /* No flags are defined for ARM. */
>>>> +        ret = arm_smmu_assign_dev(t, devfn, dev, 0);
>>>> +        if (ret)
>>>> +            return ret;
>>>> +    }
>>>> +
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +static int arm_smmu_iommu_domain_init(struct domain *d)
>>>> +{
>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>> +
>>>> +    xen_domain = xzalloc(struct arm_smmu_xen_domain);
>>>> +    if (!xen_domain)
>>>> +        return -ENOMEM;
>>>> +
>>>> +    spin_lock_init(&xen_domain->lock);
>>>> +    INIT_LIST_HEAD(&xen_domain->contexts);
>>>> +
>>>> +    dom_iommu(d)->arch.priv = xen_domain;
>>>> +
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
>>>> +{
>>>> +}
>>>> +
>>>> +static void arm_smmu_iommu_domain_teardown(struct domain *d)
>>>> +{
>>>> +    struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
>>>> +
>>>> +    ASSERT(list_empty(&xen_domain->contexts));
>>>> +    xfree(xen_domain);
>>>> +}
>>>> +
>>>> +static int __must_check arm_smmu_map_page(struct domain *d, 
>>>> unsigned long gfn,
>>>> +            unsigned long mfn, unsigned int flags)
>>>> +{
>>>> +    p2m_type_t t;
>>>> +
>>>> +    /*
>>>> +     * Grant mappings can be used for DMA requests. The dev_bus_addr
>>>> +     * returned by the hypercall is the MFN (not the IPA). For device
>>>> +     * protected by an IOMMU, Xen needs to add a 1:1 mapping in the 
>>>> domain
>>>> +     * p2m to allow DMA request to work.
>>>> +     * This is only valid when the domain is directed mapped. Hence 
>>>> this
>>>> +     * function should only be used by gnttab code with gfn == mfn.
>>>> +     */
>>>> +    BUG_ON(!is_domain_direct_mapped(d));
>>>> +    BUG_ON(mfn != gfn);
>>>> +
>>>> +    /* We only support readable and writable flags */
>>>> +    if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
>>>> +        return -EINVAL;
>>>> +
>>>> +    t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw : 
>>>> p2m_iommu_map_ro;
>>>> +
>>>> +    /*
>>>> +     * The function guest_physmap_add_entry replaces the current 
>>>> mapping
>>>> +     * if there is already one...
>>>> +     */
>>>> +    return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
>>>> +}
>>>> +
>>>> +static int __must_check arm_smmu_unmap_page(struct domain *d, 
>>>> unsigned long gfn)
>>>> +{
>>>> +    /*
>>>> +     * This function should only be used by gnttab code when the 
>>>> domain
>>>> +     * is direct mapped
>>>> +     */
>>>> +    if (!is_domain_direct_mapped(d))
>>>> +        return -EINVAL;
>>>> +
>>>> +    return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
>>>> +}
>>>> +
>>>> +static const struct iommu_ops arm_smmu_iommu_ops = {
>>>> +    .init = arm_smmu_iommu_domain_init,
>>>> +    .hwdom_init = arm_smmu_iommu_hwdom_init,
>>>> +    .teardown = arm_smmu_iommu_domain_teardown,
>>>> +    .iotlb_flush = arm_smmu_iotlb_flush,
>>>> +    .iotlb_flush_all = arm_smmu_iotlb_flush_all,
>>>> +    .assign_device = arm_smmu_assign_dev,
>>>> +    .reassign_device = arm_smmu_reassign_dev,
>>>> +    .map_page = arm_smmu_map_page,
>>>> +    .unmap_page = arm_smmu_unmap_page,
>>>> +};
>>>> +
>>>> +static
>>>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle 
>>>> *fwnode)
>>>> +{
>>>> +    struct arm_smmu_device *smmu = NULL;
>>>> +
>>>> +    spin_lock(&arm_smmu_devices_lock);
>>>> +    list_for_each_entry(smmu, &arm_smmu_devices, devices) {
>>>> +        if (smmu->dev->fwnode == fwnode)
>>>> +            break;
>>>> +    }
>>>> +    spin_unlock(&arm_smmu_devices_lock);
>>>> +
>>>> +    return smmu;
>>>> +}
>>>> +
>>>> +static __init int arm_smmu_dt_init(struct dt_device_node *dev,
>>>> +                   const void *data)
>>>> +{
>>>> +    int rc;
>>>> +
>>>> +    /*
>>>> +     * Even if the device can't be initialized, we don't want to
>>>> +     * give the SMMU device to dom0.
>>>> +     */
>>>> +    dt_device_set_used_by(dev, DOMID_XEN);
>>>> +
>>>> +    rc = arm_smmu_device_probe(dt_to_dev(dev));
>>>> +    if (rc)
>>>> +        return rc;
>>>> +
>>>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>>>> +
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>>>> +    .dt_match = arm_smmu_of_match,
>>>> +    .init = arm_smmu_dt_init,
>>>> +DT_DEVICE_END
>>>> +
>>>> +#ifdef CONFIG_ACPI
>>>> +/* Set up the IOMMU */
>>>> +static int __init arm_smmu_acpi_init(const void *data)
>>>> +{
>>>> +    int rc;
>>>> +
>>>> +    rc = arm_smmu_device_probe((struct device *)data);
>>>> +    if (rc)
>>>> +        return rc;
>>>> +
>>>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>>>> +    .class_type = ACPI_IORT_NODE_SMMU_V3,
>>>> +    .init = arm_smmu_acpi_init,
>>>> +ACPI_DEVICE_END
>>>> +
>>>> +#endif
>>>> diff --git a/xen/include/xen/linux_compat.h 
>>>> b/xen/include/xen/linux_compat.h
>>>> new file mode 100644
>>>> index 0000000000..8037be0a3e
>>>> --- /dev/null
>>>> +++ b/xen/include/xen/linux_compat.h
>>>> @@ -0,0 +1,84 @@
>>>> +/****************************************************************************** 
>>>>
>>>> + * include/xen/linux_compat.h
>>>> + *
>>>> + * Compatibility defines for porting code from Linux to Xen
>>>> + *
>>>> + * Copyright (c) 2017 Linaro Limited
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or 
>>>> modify
>>>> + * it under the terms of the GNU General Public License as 
>>>> published by
>>>> + * the Free Software Foundation; either version 2 of the License, or
>>>> + * (at your option) any later version.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful,
>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>> + * GNU General Public License for more details.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License
>>>> + * along with this program; If not, see 
>>>> <http://www.gnu.org/licenses/>.
>>>> + */
>>>> +
>>>> +#ifndef __XEN_LINUX_COMPAT_H__
>>>> +#define __XEN_LINUX_COMPAT_H__
>>>> +
>>>> +#include <asm/types.h>
>>>> +
>>>> +typedef paddr_t phys_addr_t;
>>>> +typedef paddr_t dma_addr_t;
>>>> +
>>>> +typedef unsigned int gfp_t;
>>>> +#define GFP_KERNEL 0
>>>> +#define __GFP_ZERO 0x01U
>>>> +
>>>> +/* Helpers for IRQ functions */
>>>> +#define free_irq release_irq
>>>> +
>>>> +enum irqreturn {
>>>> +    IRQ_NONE,
>>>> +    IRQ_HANDLED,
>>>> +    IRQ_WAKE_THREAD,
>>>> +};
>>>> +
>>>> +typedef enum irqreturn irqreturn_t;
>>>> +
>>>> +/* Device logger functions */
>>>> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## 
>>>> __VA_ARGS__)
>>>> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## 
>>>> __VA_ARGS__)
>>>> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## 
>>>> __VA_ARGS__)
>>>> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>>>> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## 
>>>> __VA_ARGS__)
>>>> +
>>>> +#define dev_err_ratelimited(dev, fmt, ...)                  \
>>>> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>>>> +
>>>> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
>>>> +
>>>> +/* Alias to Xen allocation helpers */
>>>> +#define kfree xfree
>>>> +#define kmalloc(size, flags) ({\
>>>> +    void *__ret_alloc = NULL; \
>>>> +    if (flags & __GFP_ZERO) \
>>>> +        __ret_alloc = _xzalloc(size, sizeof(void *)); \
>>>> +    else \
>>>> +        __ret_alloc = _xmalloc(size, sizeof(void *)); \
>>>> +    __ret_alloc; \
>>>> +})
>>>> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
>>>> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
>>>> +#define kmalloc_array(size, n, flags) ({\
>>>> +    void *__ret_alloc = NULL; \
>>>> +    if (flags & __GFP_ZERO) \
>>>> +        __ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
>>>> +    else \
>>>> +        __ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
>>>> +    __ret_alloc; \
>>>> +})
>>>> +
>>>> +/* Alias to Xen time functions */
>>>> +#define ktime_t s_time_t
>>>> +#define ktime_get()             (NOW())
>>>> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
>>>> +#define ktime_compare(t,i)      (t > (i))
>>>> +
>>>> +#endif /* __XEN_LINUX_COMPAT_H__ */
>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xenproject.org
>>> https://lists.xenproject.org/mailman/listinfo/xen-devel
>>
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xenproject.org
> https://lists.xenproject.org/mailman/listinfo/xen-devel

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Sameer Goel]

On 5/9/2018 2:58 AM, Julien Grall wrote:
>
>
> On 09/05/2018 09:30, Manish Jaggi wrote:
>>
>>
>> On 04/19/2018 04:24 PM, Manish Jaggi wrote:
>>> Sorry for top posting,
>>>
>>> is someone working on the comments on this patch?
>>>
>>> -Manish
>>>
>> If no one is working this code anymore, I would like to pick it up and continue maintaining it.
>> Is it fine with all?
>
> Last time I spoke with Sameer he was planning to resend a series. And I would prefer if he continue to lead the series unless stated otherwise.
I am working on addressing the comments in this patch set. Please expect something by end of next week.
>
> Cheers,
>
>>
>> -Regards
>> Manish
>>>
>>> On 03/10/2018 11:23 PM, Manish Jaggi wrote:
>>>> Hi Sameer,
>>>>
>>>>
>>>> On 02/09/2018 08:40 AM, Sameer Goel wrote:
>>>>> This driver follows an approach similar to smmu driver. The intent here
>>>>> is to reuse as much Linux code as possible.
>>>>> - Glue code has been introduced to bridge the API calls.
>>>>> - Called Linux functions from the Xen IOMMU function calls.
>>>>> - Xen modifications are preceded by /*Xen: comment */
>>>>> - xen/linux_compat: Add a Linux compat header
>>>>>    For porting files directly from Linux it is useful to have a function mapping
>>>>>    definitions from Linux to Xen. This file adds common API functions and
>>>>>    other defines that are needed for porting arm SMMU drivers.
>>>>>
>>>>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>>>>> ---
>>>>>   xen/arch/arm/p2m.c                    |   1 +
>>>>>   xen/drivers/Kconfig                   |   2 +
>>>>>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>>>>>   xen/drivers/passthrough/arm/Makefile  |   1 +
>>>>>   xen/drivers/passthrough/arm/smmu-v3.c | 892 ++++++++++++++++++++++++++++++++--
>>>>>   xen/include/xen/linux_compat.h        |  84 ++++
>>>>>   6 files changed, 959 insertions(+), 29 deletions(-)
>>>>>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>>>>>   create mode 100644 xen/include/xen/linux_compat.h
>>>>>
>>>>> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
>>>>> index 65e8b9c6ea..fef7605fd6 100644
>>>>> --- a/xen/arch/arm/p2m.c
>>>>> +++ b/xen/arch/arm/p2m.c
>>>>> @@ -1460,6 +1460,7 @@ err:
>>>>>   static void __init setup_virt_paging_one(void *data)
>>>>>   {
>>>>>       unsigned long val = (unsigned long)data;
>>>>> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>>>>>       WRITE_SYSREG32(val, VTCR_EL2);
>>>>>       isb();
>>>>>   }
>>>>> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
>>>>> index bc3a54f0ea..612655386d 100644
>>>>> --- a/xen/drivers/Kconfig
>>>>> +++ b/xen/drivers/Kconfig
>>>>> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>>>>>     source "drivers/video/Kconfig"
>>>>>   +source "drivers/passthrough/arm/Kconfig"
>>>>> +
>>>>>   endmenu
>>>>> diff --git a/xen/drivers/passthrough/arm/Kconfig b/xen/drivers/passthrough/arm/Kconfig
>>>>> new file mode 100644
>>>>> index 0000000000..cda899f608
>>>>> --- /dev/null
>>>>> +++ b/xen/drivers/passthrough/arm/Kconfig
>>>>> @@ -0,0 +1,8 @@
>>>>> +
>>>>> +config ARM_SMMU_v3
>>>>> +    bool "ARM SMMUv3 Support"
>>>>> +    depends on ARM_64
>>>>> +    help
>>>>> +     Support for implementations of the ARM System MMU architecture
>>>>> +     version 3.
>>>>> +
>>>>> diff --git a/xen/drivers/passthrough/arm/Makefile b/xen/drivers/passthrough/arm/Makefile
>>>>> index f4cd26e15d..e14732b55c 100644
>>>>> --- a/xen/drivers/passthrough/arm/Makefile
>>>>> +++ b/xen/drivers/passthrough/arm/Makefile
>>>>> @@ -1,2 +1,3 @@
>>>>>   obj-y += iommu.o
>>>>>   obj-y += smmu.o
>>>>> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
>>>>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
>>>>> index e67ba6c40f..f43485fe6e 100644
>>>>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>>>>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>>>>> @@ -18,28 +18,414 @@
>>>>>    * Author: Will Deacon <will.deacon@arm.com>
>>>>>    *
>>>>>    * This driver is powered by bad coffee and bombay mix.
>>>>> + *
>>>>> + *
>>>>> + * Based on Linux drivers/iommu/arm-smmu-v3.c
>>>>> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
>>>>> + *
>>>>> + * Xen modifications:
>>>>> + * Sameer Goel <sameer.goel@linaro.org>
>>>>> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
>>>>> + *
>>>>> + */
>>>>> +
>>>>> +#include <xen/acpi.h>
>>>>> +#include <xen/config.h>
>>>>> +#include <xen/delay.h>
>>>>> +#include <xen/errno.h>
>>>>> +#include <xen/err.h>
>>>>> +#include <xen/irq.h>
>>>>> +#include <xen/lib.h>
>>>>> +#include <xen/linux_compat.h>
>>>>> +#include <xen/list.h>
>>>>> +#include <xen/mm.h>
>>>>> +#include <xen/rbtree.h>
>>>>> +#include <xen/sched.h>
>>>>> +#include <xen/sizes.h>
>>>>> +#include <xen/vmap.h>
>>>>> +#include <acpi/acpi_iort.h>
>>>>> +#include <asm/atomic.h>
>>>>> +#include <asm/device.h>
>>>>> +#include <asm/io.h>
>>>>> +#include <asm/platform.h>
>>>>> +
>>>>> +/* Alias to Xen device tree helpers */
>>>>> +#define device_node dt_device_node
>>>>> +#define of_phandle_args dt_phandle_args
>>>>> +#define of_device_id dt_device_match
>>>>> +#define of_match_node dt_match_node
>>>>> +#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
>>>>> +#define of_property_read_bool dt_property_read_bool
>>>>> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
>>>>> +
>>>>> +/* Xen: Helpers to get device MMIO and IRQs */
>>>>> +struct resource {
>>>>> +    u64 addr;
>>>>> +    u64 size;
>>>>> +    unsigned int type;
>>>>> +};
>>>>> +
>>>>> +#define resource_size(res) ((res)->size)
>>>>> +
>>>>> +#define platform_device device
>>>>> +
>>>>> +#define IORESOURCE_MEM 0
>>>>> +#define IORESOURCE_IRQ 1
>>>>> +
>>>>> +static struct resource *platform_get_resource(struct platform_device *pdev,
>>>>> +                          unsigned int type,
>>>>> +                          unsigned int num)
>>>>> +{
>>>>> +    /*
>>>>> +     * The resource is only used between 2 calls of platform_get_resource.
>>>>> +     * It's quite ugly but it's avoid to add too much code in the part
>>>>> +     * imported from Linux
>>>>> +     */
>>>>> +    static struct resource res;
>>>>> +    struct acpi_iort_node *iort_node;
>>>>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>>>>> +    int ret = 0;
>>>>> +
>>>>> +    res.type = type;
>>>>> +
>>>>> +    switch (type) {
>>>>> +    case IORESOURCE_MEM:
>>>>> +        if (pdev->type == DEV_ACPI) {
>>>>> +            ret = 1;
>>>>> +            iort_node = pdev->acpi_node;
>>>>> +            node_smmu_data =
>>>>> +                (struct acpi_iort_smmu_v3 *)iort_node->node_data;
>>>>> +
>>>>> +            if (node_smmu_data != NULL) {
>>>>> +                res.addr = node_smmu_data->base_address;
>>>>> +                res.size = SZ_128K;
>>>>> +                ret = 0;
>>>>> +            }
>>>>> +        } else {
>>>>> +            ret = dt_device_get_address(dev_to_dt(pdev), num,
>>>>> +                            &res.addr, &res.size);
>>>>> +        }
>>>>> +
>>>>> +        return ((ret) ? NULL : &res);
>>>>> +
>>>>> +    case IORESOURCE_IRQ:
>>>>> +        /* ACPI case not implemented as there is no use case for it */
>>>>> +        ret = platform_get_irq(dev_to_dt(pdev), num);
>>>>> +
>>>>> +        if (ret < 0)
>>>>> +            return NULL;
>>>>> +
>>>>> +        res.addr = ret;
>>>>> +        res.size = 1;
>>>>> +
>>>>> +        return &res;
>>>>> +
>>>>> +    default:
>>>>> +        return NULL;
>>>>> +    }
>>>>> +}
>>>>> +
>>>>> +static int platform_get_irq_byname(struct platform_device *pdev, const char *name)
>>>>> +{
>>>>> +    const struct dt_property *dtprop;
>>>>> +    struct acpi_iort_node *iort_node;
>>>>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>>>>> +    int ret = 0;
>>>>> +
>>>>> +    if (pdev->type == DEV_ACPI) {
>>>>> +        iort_node = pdev->acpi_node;
>>>>> +        node_smmu_data = (struct acpi_iort_smmu_v3 *)iort_node->node_data;
>>>>> +
>>>>> +        if (node_smmu_data != NULL) {
>>>>> +            if (!strcmp(name, "eventq"))
>>>>> +                ret = node_smmu_data->event_gsiv;
>>>>> +            else if (!strcmp(name, "priq"))
>>>>> +                ret = node_smmu_data->pri_gsiv;
>>>>> +            else if (!strcmp(name, "cmdq-sync"))
>>>>> +                ret = node_smmu_data->sync_gsiv;
>>>>> +            else if (!strcmp(name, "gerror"))
>>>>> +                ret = node_smmu_data->gerr_gsiv;
>>>>> +            else
>>>>> +                ret = -EINVAL;
>>>>> +        }
>>>>> +    } else {
>>>>> +        dtprop = dt_find_property(dev_to_dt(pdev), "interrupt-names", NULL);
>>>>> +        if (!dtprop)
>>>>> +            return -EINVAL;
>>>>> +
>>>>> +        if (!dtprop->value)
>>>>> +            return -ENODATA;
>>>>> +    }
>>>>> +
>>>>> +    return ret;
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Xen: Helpers for DMA allocation. Just the function name is reused for
>>>>> + * porting code these allocation are not managed allocations
>>>>>    */
>>>>>   -#include <linux/acpi.h>
>>>>> -#include <linux/acpi_iort.h>
>>>>> -#include <linux/delay.h>
>>>>> -#include <linux/dma-iommu.h>
>>>>> -#include <linux/err.h>
>>>>> -#include <linux/interrupt.h>
>>>>> -#include <linux/iommu.h>
>>>>> -#include <linux/iopoll.h>
>>>>> -#include <linux/module.h>
>>>>> -#include <linux/msi.h>
>>>>> -#include <linux/of.h>
>>>>> -#include <linux/of_address.h>
>>>>> -#include <linux/of_iommu.h>
>>>>> -#include <linux/of_platform.h>
>>>>> -#include <linux/pci.h>
>>>>> -#include <linux/platform_device.h>
>>>>> -
>>>>> -#include <linux/amba/bus.h>
>>>>> -
>>>>> -#include "io-pgtable.h"
>>>>> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
>>>>> +               dma_addr_t *dma_handle, gfp_t gfp)
>>>>> +{
>>>>> +    void *vaddr;
>>>>> +    unsigned long alignment = size;
>>>>> +
>>>>> +    /*
>>>>> +     * _xzalloc requires that the (align & (align -1)) = 0. Most of the
>>>>> +     * allocations in SMMU code should send the right value for size. In
>>>>> +     * case this is not true print a warning and align to the size of a
>>>>> +     * (void *)
>>>>> +     */
>>>>> +    if (size & (size - 1)) {
>>>>> +        dev_warn(dev, "Fixing alignment for the DMA buffer\n");
>>>>> +        alignment = sizeof(void *);
>>>>> +    }
>>>>> +
>>>>> +    vaddr = _xzalloc(size, alignment);
>>>>> +    if (!vaddr) {
>>>>> +        dev_err(dev, "DMA allocation failed\n");
>>>>> +        return NULL;
>>>>> +    }
>>>>> +
>>>>> +    *dma_handle = virt_to_maddr(vaddr);
>>>>> +
>>>>> +    return vaddr;
>>>>> +}
>>>>> +
>>>>> +
>>>>> +static void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
>>>>> +            dma_addr_t dma_handle)
>>>>> +{
>>>>> +    xfree(vaddr);
>>>>> +}
>>>>> +
>>>>> +/* Xen: Stub out DMA domain related functions */
>>>>> +#define iommu_get_dma_cookie(dom) 0
>>>>> +#define iommu_put_dma_cookie(dom)
>>>>> +
>>>>> +/* Xen: Stub out module param related function */
>>>>> +#define module_param_named(a, b, c, d)
>>>>> +#define MODULE_PARM_DESC(a, b)
>>>>> +
>>>>> +#define dma_set_mask_and_coherent(d, b) 0
>>>>> +
>>>>> +#define of_dma_is_coherent(n) 0
>>>>> +
>>>>> +#define MODULE_DEVICE_TABLE(type, name)
>>>>> +
>>>>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>>>>> +                       struct resource *res)
>>>>> +{
>>>>> +    void __iomem *ptr;
>>>>> +
>>>>> +    if (!res || res->type != IORESOURCE_MEM) {
>>>>> +        dev_err(dev, "Invalid resource\n");
>>>>> +        return ERR_PTR(-EINVAL);
>>>>> +    }
>>>>> +
>>>>> +    ptr = ioremap_nocache(res->addr, res->size);
>>>>> +    if (!ptr) {
>>>>> +        dev_err(dev,
>>>>> +            "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
>>>>> +            res->addr, res->size);
>>>>> +        return ERR_PTR(-ENOMEM);
>>>>> +    }
>>>>> +
>>>>> +    return ptr;
>>>>> +}
>>>>> +
>>>>> +/* Xen: Compatibility define for iommu_domain_geometry.*/
>>>>> +struct iommu_domain_geometry {
>>>>> +    dma_addr_t aperture_start; /* First address that can be mapped    */
>>>>> +    dma_addr_t aperture_end;   /* Last address that can be mapped     */
>>>>> +    bool force_aperture;       /* DMA only allowed in mappable range? */
>>>>> +};
>>>>> +
>>>>> +
>>>>> +/* Xen: Type definitions for iommu_domain */
>>>>> +#define IOMMU_DOMAIN_UNMANAGED 0
>>>>> +#define IOMMU_DOMAIN_DMA 1
>>>>> +#define IOMMU_DOMAIN_IDENTITY 2
>>>>> +
>>>>> +/* Xen: Dummy iommu_domain */
>>>>> +struct iommu_domain {
>>>>> +    /* Runtime SMMU configuration for this iommu_domain */
>>>>> +    struct arm_smmu_domain        *priv;
>>>>> +    unsigned int type;
>>>>> +
>>>>> +    /* Dummy compatibility defines */
>>>>> +    unsigned long pgsize_bitmap;
>>>>> +    struct iommu_domain_geometry geometry;
>>>>> +
>>>>> +    atomic_t ref;
>>>>> +    /*
>>>>> +     * Used to link iommu_domain contexts for a same domain.
>>>>> +     * There is at least one per-SMMU to used by the domain.
>>>>> +     */
>>>>> +    struct list_head        list;
>>>>> +};
>>>>> +
>>>>> +/* Xen: Describes information required for a Xen domain */
>>>>> +struct arm_smmu_xen_domain {
>>>>> +    spinlock_t            lock;
>>>>> +    /* List of iommu domains associated to this domain */
>>>>> +    struct list_head        contexts;
>>>>> +};
>>>>> +
>>>>> +/*
>>>>> + * Xen: Information about each device stored in dev->archdata.iommu
>>>>> + *
>>>>> + * The dev->archdata.iommu stores the iommu_domain (runtime configuration of
>>>>> + * the SMMU).
>>>>> + */
>>>>> +struct arm_smmu_xen_device {
>>>>> +    struct iommu_domain *domain;
>>>>> +};
>>>>> +
>>>>> +/*
>>>>> + * Xen: io_pgtable compatibility defines.
>>>>> + * Most of these are to port in the S1 translation code as is.
>>>>> + */
>>>>> +struct io_pgtable_ops {
>>>>> +};
>>>>> +
>>>>> +struct iommu_gather_ops {
>>>>> +    void (*tlb_flush_all)(void *cookie);
>>>>> +    void (*tlb_add_flush)(unsigned long iova, size_t size, size_t granule,
>>>>> +                  bool leaf, void *cookie);
>>>>> +    void (*tlb_sync)(void *cookie);
>>>>> +};
>>>>> +
>>>>> +struct io_pgtable_cfg {
>>>>> +    /*
>>>>> +     * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE bits in
>>>>> +     *    stage 1 PTEs, for hardware which insists on validating them
>>>>> +     *    even in    non-secure state where they should normally be ignored.
>>>>> +     *
>>>>> +     * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, IOMMU_WRITE and
>>>>> +     *    IOMMU_NOEXEC flags and map everything with full access, for
>>>>> +     *    hardware which does not implement the permissions of a given
>>>>> +     *    format, and/or requires some format-specific default value.
>>>>> +     *
>>>>> +     * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching invalid
>>>>> +     *    (unmapped) entries but the hardware might do so anyway, perform
>>>>> +     *    TLB maintenance when mapping as well as when unmapping.
>>>>> +     *
>>>>> +     * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
>>>>> +     *    PTEs, for Mediatek IOMMUs which treat it as a 33rd address bit
>>>>> +     *    when the SoC is in "4GB mode" and they can only access the high
>>>>> +     *    remap of DRAM (0x1_00000000 to 0x1_ffffffff).
>>>>> +     *
>>>>> +     * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only ever
>>>>> +     *    be accessed by a fully cache-coherent IOMMU or CPU (e.g. for a
>>>>> +     *    software-emulated IOMMU), such that pagetable updates need not
>>>>> +     *    be treated as explicit DMA data.
>>>>> +     */
>>>>> +    #define IO_PGTABLE_QUIRK_ARM_NS        BIT(0)
>>>>> +    #define IO_PGTABLE_QUIRK_NO_PERMS    BIT(1)
>>>>> +    #define IO_PGTABLE_QUIRK_TLBI_ON_MAP    BIT(2)
>>>>> +    #define IO_PGTABLE_QUIRK_ARM_MTK_4GB    BIT(3)
>>>>> +    #define IO_PGTABLE_QUIRK_NO_DMA        BIT(4)
>>>>> +    unsigned long            quirks;
>>>>> +    unsigned long            pgsize_bitmap;
>>>>> +    unsigned int            ias;
>>>>> +    unsigned int            oas;
>>>>> +    const struct iommu_gather_ops    *tlb;
>>>>> +    struct device            *iommu_dev;
>>>>> +
>>>>> +    /* Low-level data specific to the table format */
>>>>> +    union {
>>>>> +        struct {
>>>>> +            u64    ttbr[2];
>>>>> +            u64    tcr;
>>>>> +            u64    mair[2];
>>>>> +        } arm_lpae_s1_cfg;
>>>>> +
>>>>> +        struct {
>>>>> +            u64    vttbr;
>>>>> +            u64    vtcr;
>>>>> +        } arm_lpae_s2_cfg;
>>>>> +
>>>>> +        struct {
>>>>> +            u32    ttbr[2];
>>>>> +            u32    tcr;
>>>>> +            u32    nmrr;
>>>>> +            u32    prrr;
>>>>> +        } arm_v7s_cfg;
>>>>> +    };
>>>>> +};
>>>>> +
>>>>> +enum io_pgtable_fmt {
>>>>> +    ARM_32_LPAE_S1,
>>>>> +    ARM_32_LPAE_S2,
>>>>> +    ARM_64_LPAE_S1,
>>>>> +    ARM_64_LPAE_S2,
>>>>> +    ARM_V7S,
>>>>> +    IO_PGTABLE_NUM_FMTS,
>>>>> +};
>>>>> +
>>>>> +/*
>>>>> + * Xen: The pgtable_ops are used by the S1 translations, so return the dummy
>>>>> + * address.
>>>>> + */
>>>>> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
>>>> Is this correct? it will make the caller null check fail
>>>>> +#define free_io_pgtable_ops(o)
>>>>> +
>>>>> +/* Xen: Define wrapper for requesting IRQs */
>>>>> +#define IRQF_ONESHOT 0
>>>>> +
>>>>> +typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
>>>>> +
>>>>> +static inline int devm_request_irq(struct device *dev, unsigned int irq,
>>>>> +                   irq_handler_t handler, unsigned long irqflags,
>>>>> +                   const char *devname, void *dev_id)
>>>>> +{
>>>>> +    /*
>>>>> +     * SMMUv3 implementation can support wired interrupt outputs that are
>>>>> +     * edge-triggered. Set the irq type as per the spec.
>>>>> +     */
>>>>> +    irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
>>>>> +    return request_irq(irq, irqflags, handler, devname, dev_id);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * Xen does not have a concept of threaded irq, but eventually we can use
>>>>> + * tasklets to optimize the following function.
>>>>> + */
>>>>> +int devm_request_threaded_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
>>>>> +                  irq_handler_t thread_fn, unsigned long irqflags,
>>>>> +                  const char *devname, void *dev_id)
>>>>> +{
>>>>> +    return devm_request_irq(dev, irq, thread_fn, irqflags, devname, dev_id);
>>>>> +}
>>>>> +
>>>>> +/* Xen: The mutex is used only during initialization so the typecast is safe */
>>>>> +#define mutex spinlock
>>>>> +#define mutex_init spin_lock_init
>>>>> +#define mutex_lock spin_lock
>>>>> +#define mutex_unlock spin_unlock
>>>>> +
>>>>> +#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
>>>>> +({ \
>>>>> +    s_time_t deadline = NOW() + MICROSECS(timeout_us); \
>>>>> +    for (;;) { \
>>>>> +        (val) = op(addr); \
>>>>> +        if (cond) \
>>>>> +            break; \
>>>>> +        if (NOW() > deadline) { \
>>>>> +            (val) = op(addr); \
>>>>> +            break; \
>>>>> +        } \
>>>>> +    udelay(sleep_us); \
>>>>> +    } \
>>>>> +    (cond) ? 0 : -ETIMEDOUT; \
>>>>> +})
>>>>> +
>>>>> +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
>>>>> +    readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, timeout_us)
>>>>> +
>>>>> +#define VA_BITS 0 /* Only needed for S1 translations */
>>>>>     /* MMIO registers */
>>>>>   #define ARM_SMMU_IDR0            0x0
>>>>> @@ -433,6 +819,7 @@ enum pri_resp {
>>>>>       PRI_RESP_SUCC,
>>>>>   };
>>>>>   +#if 0 /* Xen: No MSI support in this iteration */
>>>>>   enum arm_smmu_msi_index {
>>>>>       EVTQ_MSI_INDEX,
>>>>>       GERROR_MSI_INDEX,
>>>>> @@ -457,6 +844,7 @@ static phys_addr_t arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
>>>>>           ARM_SMMU_PRIQ_IRQ_CFG2,
>>>>>       },
>>>>>   };
>>>>> +#endif
>>>>>     struct arm_smmu_cmdq_ent {
>>>>>       /* Common fields */
>>>>> @@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
>>>>>       u16                vmid;
>>>>>       u64                vttbr;
>>>>>       u64                vtcr;
>>>>> +    /* Xen: Domain associated to this configuration */
>>>>> +    struct domain            *domain;
>>>>>   };
>>>>>     struct arm_smmu_strtab_ent {
>>>>> @@ -635,9 +1025,21 @@ struct arm_smmu_device {
>>>>>       struct arm_smmu_strtab_cfg    strtab_cfg;
>>>>>         /* IOMMU core code handle */
>>>>> +#if 0 /*Xen: Generic iommu_device ref not needed here */
>>>>>       struct iommu_device        iommu;
>>>>> +#endif
>>>>> +    /* Xen: Need to keep a list of SMMU devices */
>>>>> +    struct list_head                devices;
>>>>>   };
>>>>>   +/* Xen: Keep a list of devices associated with this driver */
>>>>> +static DEFINE_SPINLOCK(arm_smmu_devices_lock);
>>>>> +static LIST_HEAD(arm_smmu_devices);
>>>>> +/* Xen: Helper for finding a device using fwnode */
>>>>> +static
>>>>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode);
>>>>> +
>>>>> +
>>>>>   /* SMMU private data for each master */
>>>>>   struct arm_smmu_master_data {
>>>>>       struct arm_smmu_device        *smmu;
>>>>> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
>>>>>         dev_info(smmu->dev, "unexpected PRI request received:\n");
>>>>>       dev_info(smmu->dev,
>>>>> -         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova 0x%016llx\n",
>>>>> +         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova %#" PRIx64 "\n",
>>>>>            sid, ssid, grpid, last ? "L" : "",
>>>>>            evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>>>>>            evt[0] & PRIQ_0_PERM_READ ? "R" : "",
>>>>> @@ -1346,6 +1748,8 @@ static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
>>>>>   {
>>>>>       arm_smmu_gerror_handler(irq, dev);
>>>>>       arm_smmu_cmdq_sync_handler(irq, dev);
>>>>> +    /*Xen: No threaded irq. So call the required function from here */
>>>>> +    arm_smmu_combined_irq_thread(irq, dev);
>>>>>       return IRQ_WAKE_THREAD;
>>>>>   }
>>>>>   @@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
>>>>>       arm_smmu_cmdq_issue_cmd(smmu, &cmd);
>>>>>   }
>>>>>   +/*
>>>>> + * Xen: Define the IRQ handlers for xen. The linux functions would be
>>>>> + * modified to use the functions defined in the following code.
>>>>> + */
>>>>> +static void arm_smmu_evtq_thread_xen(int irq, void *dev,
>>>>> +                       struct cpu_user_regs *regs)
>>>>> +{
>>>>> +    arm_smmu_evtq_thread(irq, dev);
>>>>> +}
>>>>> +
>>>>> +static void arm_smmu_priq_thread_xen(int irq, void *dev,
>>>>> +                       struct cpu_user_regs *regs)
>>>>> +{
>>>>> +    arm_smmu_priq_thread(irq, dev);
>>>>> +}
>>>>> +
>>>>> +static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
>>>>> +                       struct cpu_user_regs *regs)
>>>>> +{
>>>>> +    arm_smmu_cmdq_sync_handler(irq, dev);
>>>>> +}
>>>>> +
>>>>> +static void arm_smmu_gerror_handler_xen(int irq, void *dev,
>>>>> +                       struct cpu_user_regs *regs)
>>>>> +{
>>>>> +    arm_smmu_gerror_handler(irq, dev);
>>>>> +}
>>>>> +
>>>>> +static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
>>>>> +                       struct cpu_user_regs *regs)
>>>>> +{
>>>>> +    arm_smmu_combined_irq_handler(irq, dev);
>>>>> +}
>>>>> +
>>>>> +#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
>>>>> +#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
>>>>> +#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
>>>>> +#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
>>>>> +#define arm_smmu_combined_irq_handler arm_smmu_combined_irq_handler_xen
>>>>> +
>>>>>   static void arm_smmu_tlb_sync(void *cookie)
>>>>>   {
>>>>>       struct arm_smmu_domain *smmu_domain = cookie;
>>>>> @@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops arm_smmu_gather_ops = {
>>>>>       .tlb_sync    = arm_smmu_tlb_sync,
>>>>>   };
>>>>>   +#if 0 /*Xen: Unused functionality */
>>>>>   /* IOMMU API */
>>>>>   static bool arm_smmu_capable(enum iommu_cap cap)
>>>>>   {
>>>>> @@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
>>>>>           return false;
>>>>>       }
>>>>>   }
>>>>> +#endif
>>>>>     static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
>>>>>   {
>>>>> @@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct arm_smmu_domain *smmu_domain,
>>>>>       if (vmid < 0)
>>>>>           return vmid;
>>>>>   -    cfg->vmid    = (u16)vmid;
>>>>> -    cfg->vttbr    = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
>>>>> -    cfg->vtcr    = pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
>>>>> +    /*
>>>>> +     * Xen: Get the ttbr and vtcr values
>>>>> +     * vttbr: This is a shared value with the domain page table
>>>>> +     * vtcr: The TCR settings are the same as CPU since the page
>>>>> +     * tables are shared
>>>>> +     */
>>>>> +
>>>>> +    cfg->vmid    = vmid;
>>>>> +    cfg->vttbr    = page_to_maddr(cfg->domain->arch.p2m.root);
>>>>> +    cfg->vtcr    = READ_SYSREG32(VTCR_EL2) & STRTAB_STE_2_VTCR_MASK;
>>>>>       return 0;
>>>>>   }
>>>>>   @@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain)
>>>>>       if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
>>>>>           pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
>>>>>   +    /* Xen: pgtbl_ops gets an invalid address */
>>>>>       pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
>>>>>       if (!pgtbl_ops)
>>>>>           return -ENOMEM;
>>>> Will this not fail ?
>>>>> @@ -1721,6 +2175,7 @@ out_unlock:
>>>>>       return ret;
>>>>>   }
>>>>>   +#if 0 /* Xen: Unused functionality */
>>>>>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
>>>>>               phys_addr_t paddr, size_t size, int prot)
>>>>>   {
>>>>> @@ -1772,6 +2227,7 @@ struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>>>>>       put_device(dev);
>>>>>       return dev ? dev_get_drvdata(dev) : NULL;
>>>>>   }
>>>>> +#endif
>>>>>     static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
>>>>>   {
>>>>> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
>>>>>       return sid < limit;
>>>>>   }
>>>>>   +/* Xen: Unused */
>>>>> +#if 0
>>>>>   static struct iommu_ops arm_smmu_ops;
>>>>> +#endif
>>>>> +
>>>>> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
>>>>> +static const struct iommu_ops arm_smmu_iommu_ops;
>>>>> +#define arm_smmu_ops arm_smmu_iommu_ops
>>>>>     static int arm_smmu_add_device(struct device *dev)
>>>>>   {
>>>>> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device *dev)
>>>>>       struct arm_smmu_device *smmu;
>>>>>       struct arm_smmu_master_data *master;
>>>>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>>>>> +#if 0 /*Xen: iommu_group is not needed */
>>>>>       struct iommu_group *group;
>>>>> +#endif
>>>>>   +    /* Xen: fwspec->ops are not needed */
>>>>>       if (!fwspec || fwspec->ops != &arm_smmu_ops)
>>>>>           return -ENODEV;
>>>>>       /*
>>>>> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device *dev)
>>>>>           }
>>>>>       }
>>>>>   +/*
>>>>> + * Xen: Do not need an iommu group as the stream data is carried by the SMMU
>>>>> + * master device object
>>>>> + */
>>>>> +#if 0
>>>>>       group = iommu_group_get_for_dev(dev);
>>>>>       if (!IS_ERR(group)) {
>>>>>           iommu_group_put(group);
>>>>> @@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device *dev)
>>>>>       }
>>>>>         return PTR_ERR_OR_ZERO(group);
>>>>> +#endif
>>>>> +    return 0;
>>>>>   }
>>>>>   +/*
>>>>> + * Xen: We can potentially support this function and destroy a device. This
>>>>> + * will be relevant for PCI hotplug. So, will be implemented as needed after
>>>>> + * passthrough support is available.
>>>>> + */
>>>>> +#if 0
>>>>>   static void arm_smmu_remove_device(struct device *dev)
>>>>>   {
>>>>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>>>>> @@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
>>>>>       .put_resv_regions    = arm_smmu_put_resv_regions,
>>>>>       .pgsize_bitmap        = -1UL, /* Restricted during device attach */
>>>>>   };
>>>>> +#endif
>>>>>     /* Probing and initialisation functions */
>>>>>   static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
>>>>> @@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct arm_smmu_device *smmu, u32 set, u32 clr)
>>>>>                         1, ARM_SMMU_POLL_TIMEOUT_US);
>>>>>   }
>>>>>   +#if 0 /* Xen: There is no MSI support as yet */
>>>>>   static void arm_smmu_free_msis(void *data)
>>>>>   {
>>>>>       struct device *dev = data;
>>>>> @@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
>>>>>       /* Add callback to free MSIs on teardown */
>>>>>       devm_add_action(dev, arm_smmu_free_msis, dev);
>>>>>   }
>>>>> +#endif
>>>>>     static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
>>>>>   {
>>>>>       int irq, ret;
>>>>>   +#if 0 /*Xen: Cannot setup msis for now */
>>>>>       arm_smmu_setup_msis(smmu);
>>>>> +#endif
>>>>>         /* Request interrupt lines */
>>>>>       irq = smmu->evtq.q.irq;
>>>>> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
>>>>>            * Cavium ThunderX2 implementation doesn't not support unique
>>>>>            * irq lines. Use single irq line for all the SMMUv3 interrupts.
>>>>>            */
>>>>> -        ret = devm_request_threaded_irq(smmu->dev, irq,
>>>>> +        /*
>>>>> +         * Xen: Does not support threaded irqs, so serialise the setup.
>>>>> +         * This is the same for pris and event interrupt lines on other
>>>>> +         * systems
>>>>> +         */
>>>>> +        ret = devm_request_irq(smmu->dev, irq,
>>>>>                       arm_smmu_combined_irq_handler,
>>>>> -                    arm_smmu_combined_irq_thread,
>>>>>                       IRQF_ONESHOT,
>>>>>                       "arm-smmu-v3-combined-irq", smmu);
>>>>>           if (ret < 0)
>>>>> @@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>>>>>           smmu->features |= ARM_SMMU_FEAT_STALLS;
>>>>>       }
>>>>>   +/*
>>>>> + * Xen: Block stage 1 translations. By doing this here we do not need to set the
>>>>> + * domain->stage explicitly.
>>>>> + */
>>>>> +#if 0
>>>>>       if (reg & IDR0_S1P)
>>>>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
>>>>> +#endif
>>>>>         if (reg & IDR0_S2P)
>>>>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
>>>>> @@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>>>>>       if (reg & IDR5_GRAN4K)
>>>>>           smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
>>>>>   +#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
>>>>>       if (arm_smmu_ops.pgsize_bitmap == -1UL)
>>>>>           arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
>>>>>       else
>>>>>           arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
>>>>> +#endif
>>>>>         /* Output address size */
>>>>>       switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
>>>>> @@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
>>>>>       struct device *dev = smmu->dev;
>>>>>       struct acpi_iort_node *node;
>>>>>   -    node = *(struct acpi_iort_node **)dev_get_platdata(dev);
>>>>> +    /* Xen: Modification to get iort_node */
>>>>> +    node = (struct acpi_iort_node *)dev->acpi_node;
>>>>>         /* Retrieve SMMUv3 specific data */
>>>>>       iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
>>>>> @@ -2703,7 +3200,7 @@ static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
>>>>>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>>>>                       struct arm_smmu_device *smmu)
>>>>>   {
>>>>> -    struct device *dev = &pdev->dev;
>>>>> +    struct device *dev = pdev;
>>>>>       u32 cells;
>>>>>       int ret = -EINVAL;
>>>>>   @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>>>>         parse_driver_options(smmu);
>>>>>   +    /* Xen: of_dma_is_coherent is a stub till dt support is introduced */
>>>>>       if (of_dma_is_coherent(dev->of_node))
>>>>>           smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>>>>>   @@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>>>>   {
>>>>>       int irq, ret;
>>>>>       struct resource *res;
>>>>> +#if 0 /*Xen: Do not need to setup sysfs */
>>>>>       resource_size_t ioaddr;
>>>>> +#endif
>>>>>       struct arm_smmu_device *smmu;
>>>>> -    struct device *dev = &pdev->dev;
>>>>> +    struct device *dev = pdev;/* Xen: dev is ignored */
>>>>>       bool bypass;
>>>>>         smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
>>>>> @@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>>>>           dev_err(dev, "MMIO region too small (%pr)\n", res);
>>>>>           return -EINVAL;
>>>>>       }
>>>>> +#if 0 /*Xen: Do not need to setup sysfs */
>>>>>       ioaddr = res->start;
>>>>> +#endif
>>>>>         smmu->base = devm_ioremap_resource(dev, res);
>>>>>       if (IS_ERR(smmu->base))
>>>>> @@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>>>>           return ret;
>>>>>         /* Record our private device structure */
>>>>> +    /* Xen: SMMU is not treated a a platform device*/
>>>>> +#if 0
>>>>>       platform_set_drvdata(pdev, smmu);
>>>>> +#endif
>>>>>         /* Reset the device */
>>>>>       ret = arm_smmu_device_reset(smmu, bypass);
>>>>>       if (ret)
>>>>>           return ret;
>>>>>   +/* Xen: Not creating an IOMMU device list for Xen */
>>>>> +#if 0
>>>>>       /* And we're up. Go go go! */
>>>>>       ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
>>>>>                        "smmu3.%pa", &ioaddr);
>>>>> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>>>>           if (ret)
>>>>>               return ret;
>>>>>       }
>>>>> +#endif
>>>>> +    /*
>>>>> +     * Xen: Keep a list of all probed devices. This will be used to query
>>>>> +     * the smmu devices based on the fwnode.
>>>>> +     */
>>>>> +    INIT_LIST_HEAD(&smmu->devices);
>>>>> +    spin_lock(&arm_smmu_devices_lock);
>>>>> +    list_add(&smmu->devices, &arm_smmu_devices);
>>>>> +    spin_unlock(&arm_smmu_devices_lock);
>>>>>       return 0;
>>>>>   }
>>>>>   +/* Xen: Unused function */
>>>>> +#if 0
>>>>>   static int arm_smmu_device_remove(struct platform_device *pdev)
>>>>>   {
>>>>>       struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
>>>>> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct platform_device *pdev)
>>>>>   {
>>>>>       arm_smmu_device_remove(pdev);
>>>>>   }
>>>>> +#endif
>>>>> +
>>>>>     static const struct of_device_id arm_smmu_of_match[] = {
>>>>>       { .compatible = "arm,smmu-v3", },
>>>>> @@ -2867,6 +3387,7 @@ static const struct of_device_id arm_smmu_of_match[] = {
>>>>>   };
>>>>>   MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>>>>   +#if 0
>>>>>   static struct platform_driver arm_smmu_driver = {
>>>>>       .driver    = {
>>>>>           .name        = "arm-smmu-v3",
>>>>> @@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", NULL);
>>>>>   MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
>>>>>   MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
>>>>>   MODULE_LICENSE("GPL v2");
>>>>> +#endif
>>>>> +
>>>>> +/***** Start of Xen specific code *****/
>>>>> +
>>>>> +static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
>>>>> +{
>>>>> +    struct arm_smmu_xen_domain *smmu_domain = dom_iommu(d)->arch.priv;
>>>>> +    struct iommu_domain *cfg;
>>>>> +
>>>>> +    spin_lock(&smmu_domain->lock);
>>>>> +    list_for_each_entry(cfg, &smmu_domain->contexts, list) {
>>>>> +        /*
>>>>> +         * Only invalidate the context when SMMU is present.
>>>>> +         * This is because the context initialization is delayed
>>>>> +         * until a master has been added.
>>>>> +         */
>>>>> +        if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
>>>>> +            continue;
>>>>> +        arm_smmu_tlb_inv_context(cfg->priv);
>>>>> +    }
>>>>> +    spin_unlock(&smmu_domain->lock);
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +static int __must_check arm_smmu_iotlb_flush(struct domain *d,
>>>>> +                         unsigned long gfn,
>>>>> +                         unsigned int page_count)
>>>>> +{
>>>>> +    return arm_smmu_iotlb_flush_all(d);
>>>>> +}
>>>>> +
>>>>> +static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
>>>>> +                        struct device *dev)
>>>>> +{
>>>>> +    struct iommu_domain *domain;
>>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>>> +    struct arm_smmu_device *smmu;
>>>>> +    struct arm_smmu_domain *smmu_domain;
>>>>> +
>>>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>>>> +
>>>>> +    smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
>>>>> +    if (!smmu)
>>>>> +        return NULL;
>>>>> +
>>>>> +    /*
>>>>> +     * Loop through the &xen_domain->contexts to locate a context
>>>>> +     * assigned to this SMMU
>>>>> +     */
>>>>> +    list_for_each_entry(domain, &xen_domain->contexts, list) {
>>>>> +        smmu_domain = to_smmu_domain(domain);
>>>>> +        if (smmu_domain->smmu == smmu)
>>>>> +            return domain;
>>>>> +    }
>>>>> +
>>>>> +    return NULL;
>>>>> +}
>>>>> +
>>>>> +static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
>>>>> +{
>>>>> +    list_del(&domain->list);
>>>>> +    arm_smmu_domain_free(domain);
>>>>> +}
>>>>> +
>>>>> +static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
>>>>> +                   struct device *dev, u32 flag)
>>>>> +{
>>>>> +    int ret = 0;
>>>>> +    struct iommu_domain *domain;
>>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>>> +    struct arm_smmu_domain *arm_smmu;
>>>>> +
>>>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>>>> +
>>>>> +    if (!dev->archdata.iommu) {
>>>>> +        dev->archdata.iommu = xzalloc(struct arm_smmu_xen_device);
>>>>> +        if (!dev->archdata.iommu)
>>>>> +            return -ENOMEM;
>>>>> +    }
>>>>> +
>>>>> +    ret = arm_smmu_add_device(dev);
>>>>> +    if (ret)
>>>>> +        return ret;
>>>>> +
>>>>> +    spin_lock(&xen_domain->lock);
>>>>> +
>>>>> +    /*
>>>>> +     * Check to see if an iommu_domain already exists for this xen domain
>>>>> +     * under the same SMMU
>>>>> +     */
>>>>> +    domain = arm_smmu_get_domain(d, dev);
>>>>> +    if (!domain) {
>>>>> +
>>>>> +        domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
>>>>> +        if (!domain) {
>>>>> +            ret = -ENOMEM;
>>>>> +            goto out;
>>>>> +        }
>>>>> +
>>>>> +        arm_smmu = to_smmu_domain(domain);
>>>>> +        arm_smmu->s2_cfg.domain = d;
>>>>> +
>>>>> +        /* Chain the new context to the domain */
>>>>> +        list_add(&domain->list, &xen_domain->contexts);
>>>>> +
>>>>> +    }
>>>>> +
>>>>> +    ret = arm_smmu_attach_dev(domain, dev);
>>>>> +    if (ret) {
>>>>> +        if (domain->ref.counter == 0)
>>>>> +            arm_smmu_destroy_iommu_domain(domain);
>>>>> +    } else {
>>>>> +        atomic_inc(&domain->ref);
>>>>> +    }
>>>>> +
>>>>> +out:
>>>>> +    spin_unlock(&xen_domain->lock);
>>>>> +    return ret;
>>>>> +}
>>>>> +
>>>>> +static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
>>>>> +{
>>>>> +    struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
>>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>>> +    struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
>>>>> +
>>>>> +    xen_domain = dom_iommu(d)->arch.priv;
>>>>> +
>>>>> +    if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
>>>>> +        dev_err(dev, " not attached to domain %d\n", d->domain_id);
>>>>> +        return -ESRCH;
>>>>> +    }
>>>>> +
>>>>> +    spin_lock(&xen_domain->lock);
>>>>> +
>>>>> +    arm_smmu_detach_dev(dev);
>>>>> +    atomic_dec(&domain->ref);
>>>>> +
>>>>> +    if (domain->ref.counter == 0)
>>>>> +        arm_smmu_destroy_iommu_domain(domain);
>>>>> +
>>>>> +    spin_unlock(&xen_domain->lock);
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
>>>>> +                 u8 devfn,  struct device *dev)
>>>>> +{
>>>>> +    int ret = 0;
>>>>> +
>>>>> +    /* Don't allow remapping on other domain than hwdom */
>>>>> +    if (t && t != hardware_domain)
>>>>> +        return -EPERM;
>>>>> +
>>>>> +    if (t == s)
>>>>> +        return 0;
>>>>> +
>>>>> +    ret = arm_smmu_deassign_dev(s, dev);
>>>>> +    if (ret)
>>>>> +        return ret;
>>>>> +
>>>>> +    if (t) {
>>>>> +        /* No flags are defined for ARM. */
>>>>> +        ret = arm_smmu_assign_dev(t, devfn, dev, 0);
>>>>> +        if (ret)
>>>>> +            return ret;
>>>>> +    }
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +static int arm_smmu_iommu_domain_init(struct domain *d)
>>>>> +{
>>>>> +    struct arm_smmu_xen_domain *xen_domain;
>>>>> +
>>>>> +    xen_domain = xzalloc(struct arm_smmu_xen_domain);
>>>>> +    if (!xen_domain)
>>>>> +        return -ENOMEM;
>>>>> +
>>>>> +    spin_lock_init(&xen_domain->lock);
>>>>> +    INIT_LIST_HEAD(&xen_domain->contexts);
>>>>> +
>>>>> +    dom_iommu(d)->arch.priv = xen_domain;
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
>>>>> +{
>>>>> +}
>>>>> +
>>>>> +static void arm_smmu_iommu_domain_teardown(struct domain *d)
>>>>> +{
>>>>> +    struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
>>>>> +
>>>>> +    ASSERT(list_empty(&xen_domain->contexts));
>>>>> +    xfree(xen_domain);
>>>>> +}
>>>>> +
>>>>> +static int __must_check arm_smmu_map_page(struct domain *d, unsigned long gfn,
>>>>> +            unsigned long mfn, unsigned int flags)
>>>>> +{
>>>>> +    p2m_type_t t;
>>>>> +
>>>>> +    /*
>>>>> +     * Grant mappings can be used for DMA requests. The dev_bus_addr
>>>>> +     * returned by the hypercall is the MFN (not the IPA). For device
>>>>> +     * protected by an IOMMU, Xen needs to add a 1:1 mapping in the domain
>>>>> +     * p2m to allow DMA request to work.
>>>>> +     * This is only valid when the domain is directed mapped. Hence this
>>>>> +     * function should only be used by gnttab code with gfn == mfn.
>>>>> +     */
>>>>> +    BUG_ON(!is_domain_direct_mapped(d));
>>>>> +    BUG_ON(mfn != gfn);
>>>>> +
>>>>> +    /* We only support readable and writable flags */
>>>>> +    if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
>>>>> +        return -EINVAL;
>>>>> +
>>>>> +    t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw : p2m_iommu_map_ro;
>>>>> +
>>>>> +    /*
>>>>> +     * The function guest_physmap_add_entry replaces the current mapping
>>>>> +     * if there is already one...
>>>>> +     */
>>>>> +    return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
>>>>> +}
>>>>> +
>>>>> +static int __must_check arm_smmu_unmap_page(struct domain *d, unsigned long gfn)
>>>>> +{
>>>>> +    /*
>>>>> +     * This function should only be used by gnttab code when the domain
>>>>> +     * is direct mapped
>>>>> +     */
>>>>> +    if (!is_domain_direct_mapped(d))
>>>>> +        return -EINVAL;
>>>>> +
>>>>> +    return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
>>>>> +}
>>>>> +
>>>>> +static const struct iommu_ops arm_smmu_iommu_ops = {
>>>>> +    .init = arm_smmu_iommu_domain_init,
>>>>> +    .hwdom_init = arm_smmu_iommu_hwdom_init,
>>>>> +    .teardown = arm_smmu_iommu_domain_teardown,
>>>>> +    .iotlb_flush = arm_smmu_iotlb_flush,
>>>>> +    .iotlb_flush_all = arm_smmu_iotlb_flush_all,
>>>>> +    .assign_device = arm_smmu_assign_dev,
>>>>> +    .reassign_device = arm_smmu_reassign_dev,
>>>>> +    .map_page = arm_smmu_map_page,
>>>>> +    .unmap_page = arm_smmu_unmap_page,
>>>>> +};
>>>>> +
>>>>> +static
>>>>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>>>>> +{
>>>>> +    struct arm_smmu_device *smmu = NULL;
>>>>> +
>>>>> +    spin_lock(&arm_smmu_devices_lock);
>>>>> +    list_for_each_entry(smmu, &arm_smmu_devices, devices) {
>>>>> +        if (smmu->dev->fwnode == fwnode)
>>>>> +            break;
>>>>> +    }
>>>>> +    spin_unlock(&arm_smmu_devices_lock);
>>>>> +
>>>>> +    return smmu;
>>>>> +}
>>>>> +
>>>>> +static __init int arm_smmu_dt_init(struct dt_device_node *dev,
>>>>> +                   const void *data)
>>>>> +{
>>>>> +    int rc;
>>>>> +
>>>>> +    /*
>>>>> +     * Even if the device can't be initialized, we don't want to
>>>>> +     * give the SMMU device to dom0.
>>>>> +     */
>>>>> +    dt_device_set_used_by(dev, DOMID_XEN);
>>>>> +
>>>>> +    rc = arm_smmu_device_probe(dt_to_dev(dev));
>>>>> +    if (rc)
>>>>> +        return rc;
>>>>> +
>>>>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>>>>> +    .dt_match = arm_smmu_of_match,
>>>>> +    .init = arm_smmu_dt_init,
>>>>> +DT_DEVICE_END
>>>>> +
>>>>> +#ifdef CONFIG_ACPI
>>>>> +/* Set up the IOMMU */
>>>>> +static int __init arm_smmu_acpi_init(const void *data)
>>>>> +{
>>>>> +    int rc;
>>>>> +
>>>>> +    rc = arm_smmu_device_probe((struct device *)data);
>>>>> +    if (rc)
>>>>> +        return rc;
>>>>> +
>>>>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>>>>> +    .class_type = ACPI_IORT_NODE_SMMU_V3,
>>>>> +    .init = arm_smmu_acpi_init,
>>>>> +ACPI_DEVICE_END
>>>>> +
>>>>> +#endif
>>>>> diff --git a/xen/include/xen/linux_compat.h b/xen/include/xen/linux_compat.h
>>>>> new file mode 100644
>>>>> index 0000000000..8037be0a3e
>>>>> --- /dev/null
>>>>> +++ b/xen/include/xen/linux_compat.h
>>>>> @@ -0,0 +1,84 @@
>>>>> +/******************************************************************************
>>>>> + * include/xen/linux_compat.h
>>>>> + *
>>>>> + * Compatibility defines for porting code from Linux to Xen
>>>>> + *
>>>>> + * Copyright (c) 2017 Linaro Limited
>>>>> + *
>>>>> + * This program is free software; you can redistribute it and/or modify
>>>>> + * it under the terms of the GNU General Public License as published by
>>>>> + * the Free Software Foundation; either version 2 of the License, or
>>>>> + * (at your option) any later version.
>>>>> + *
>>>>> + * This program is distributed in the hope that it will be useful,
>>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>>> + * GNU General Public License for more details.
>>>>> + *
>>>>> + * You should have received a copy of the GNU General Public License
>>>>> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
>>>>> + */
>>>>> +
>>>>> +#ifndef __XEN_LINUX_COMPAT_H__
>>>>> +#define __XEN_LINUX_COMPAT_H__
>>>>> +
>>>>> +#include <asm/types.h>
>>>>> +
>>>>> +typedef paddr_t phys_addr_t;
>>>>> +typedef paddr_t dma_addr_t;
>>>>> +
>>>>> +typedef unsigned int gfp_t;
>>>>> +#define GFP_KERNEL 0
>>>>> +#define __GFP_ZERO 0x01U
>>>>> +
>>>>> +/* Helpers for IRQ functions */
>>>>> +#define free_irq release_irq
>>>>> +
>>>>> +enum irqreturn {
>>>>> +    IRQ_NONE,
>>>>> +    IRQ_HANDLED,
>>>>> +    IRQ_WAKE_THREAD,
>>>>> +};
>>>>> +
>>>>> +typedef enum irqreturn irqreturn_t;
>>>>> +
>>>>> +/* Device logger functions */
>>>>> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## __VA_ARGS__)
>>>>> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
>>>>> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## __VA_ARGS__)
>>>>> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>>>>> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
>>>>> +
>>>>> +#define dev_err_ratelimited(dev, fmt, ...)                  \
>>>>> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>>>>> +
>>>>> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
>>>>> +
>>>>> +/* Alias to Xen allocation helpers */
>>>>> +#define kfree xfree
>>>>> +#define kmalloc(size, flags) ({\
>>>>> +    void *__ret_alloc = NULL; \
>>>>> +    if (flags & __GFP_ZERO) \
>>>>> +        __ret_alloc = _xzalloc(size, sizeof(void *)); \
>>>>> +    else \
>>>>> +        __ret_alloc = _xmalloc(size, sizeof(void *)); \
>>>>> +    __ret_alloc; \
>>>>> +})
>>>>> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
>>>>> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
>>>>> +#define kmalloc_array(size, n, flags) ({\
>>>>> +    void *__ret_alloc = NULL; \
>>>>> +    if (flags & __GFP_ZERO) \
>>>>> +        __ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
>>>>> +    else \
>>>>> +        __ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
>>>>> +    __ret_alloc; \
>>>>> +})
>>>>> +
>>>>> +/* Alias to Xen time functions */
>>>>> +#define ktime_t s_time_t
>>>>> +#define ktime_get()             (NOW())
>>>>> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
>>>>> +#define ktime_compare(t,i)      (t > (i))
>>>>> +
>>>>> +#endif /* __XEN_LINUX_COMPAT_H__ */
>>>>
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xenproject.org
>>>> https://lists.xenproject.org/mailman/listinfo/xen-devel
>>>
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xenproject.org
>> https://lists.xenproject.org/mailman/listinfo/xen-devel
>


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 5/7] xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver

[Sameer Goel]

On 3/10/2018 10:53 AM, Manish Jaggi wrote:
> Hi Sameer,
>
>
> On 02/09/2018 08:40 AM, Sameer Goel wrote:
>> This driver follows an approach similar to smmu driver. The intent here
>> is to reuse as much Linux code as possible.
>> - Glue code has been introduced to bridge the API calls.
>> - Called Linux functions from the Xen IOMMU function calls.
>> - Xen modifications are preceded by /*Xen: comment */
>> - xen/linux_compat: Add a Linux compat header
>>    For porting files directly from Linux it is useful to have a function mapping
>>    definitions from Linux to Xen. This file adds common API functions and
>>    other defines that are needed for porting arm SMMU drivers.
>>
>> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
>> ---
>>   xen/arch/arm/p2m.c                    |   1 +
>>   xen/drivers/Kconfig                   |   2 +
>>   xen/drivers/passthrough/arm/Kconfig   |   8 +
>>   xen/drivers/passthrough/arm/Makefile  |   1 +
>>   xen/drivers/passthrough/arm/smmu-v3.c | 892 ++++++++++++++++++++++++++++++++--
>>   xen/include/xen/linux_compat.h        |  84 ++++
>>   6 files changed, 959 insertions(+), 29 deletions(-)
>>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>>   create mode 100644 xen/include/xen/linux_compat.h
>>
>> diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
>> index 65e8b9c6ea..fef7605fd6 100644
>> --- a/xen/arch/arm/p2m.c
>> +++ b/xen/arch/arm/p2m.c
>> @@ -1460,6 +1460,7 @@ err:
>>   static void __init setup_virt_paging_one(void *data)
>>   {
>>       unsigned long val = (unsigned long)data;
>> +    /* SMMUv3 S2 cfg vtcr reuses the following value */
>>       WRITE_SYSREG32(val, VTCR_EL2);
>>       isb();
>>   }
>> diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
>> index bc3a54f0ea..612655386d 100644
>> --- a/xen/drivers/Kconfig
>> +++ b/xen/drivers/Kconfig
>> @@ -12,4 +12,6 @@ source "drivers/pci/Kconfig"
>>     source "drivers/video/Kconfig"
>>   +source "drivers/passthrough/arm/Kconfig"
>> +
>>   endmenu
>> diff --git a/xen/drivers/passthrough/arm/Kconfig b/xen/drivers/passthrough/arm/Kconfig
>> new file mode 100644
>> index 0000000000..cda899f608
>> --- /dev/null
>> +++ b/xen/drivers/passthrough/arm/Kconfig
>> @@ -0,0 +1,8 @@
>> +
>> +config ARM_SMMU_v3
>> +    bool "ARM SMMUv3 Support"
>> +    depends on ARM_64
>> +    help
>> +     Support for implementations of the ARM System MMU architecture
>> +     version 3.
>> +
>> diff --git a/xen/drivers/passthrough/arm/Makefile b/xen/drivers/passthrough/arm/Makefile
>> index f4cd26e15d..e14732b55c 100644
>> --- a/xen/drivers/passthrough/arm/Makefile
>> +++ b/xen/drivers/passthrough/arm/Makefile
>> @@ -1,2 +1,3 @@
>>   obj-y += iommu.o
>>   obj-y += smmu.o
>> +obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
>> index e67ba6c40f..f43485fe6e 100644
>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>> @@ -18,28 +18,414 @@
>>    * Author: Will Deacon <will.deacon@arm.com>
>>    *
>>    * This driver is powered by bad coffee and bombay mix.
>> + *
>> + *
>> + * Based on Linux drivers/iommu/arm-smmu-v3.c
>> + * => commit 7aa8619a66aea52b145e04cbab4f8d6a4e5f3f3b
>> + *
>> + * Xen modifications:
>> + * Sameer Goel <sameer.goel@linaro.org>
>> + * Copyright (C) 2017, The Linux Foundation, All rights reserved.
>> + *
>> + */
>> +
>> +#include <xen/acpi.h>
>> +#include <xen/config.h>
>> +#include <xen/delay.h>
>> +#include <xen/errno.h>
>> +#include <xen/err.h>
>> +#include <xen/irq.h>
>> +#include <xen/lib.h>
>> +#include <xen/linux_compat.h>
>> +#include <xen/list.h>
>> +#include <xen/mm.h>
>> +#include <xen/rbtree.h>
>> +#include <xen/sched.h>
>> +#include <xen/sizes.h>
>> +#include <xen/vmap.h>
>> +#include <acpi/acpi_iort.h>
>> +#include <asm/atomic.h>
>> +#include <asm/device.h>
>> +#include <asm/io.h>
>> +#include <asm/platform.h>
>> +
>> +/* Alias to Xen device tree helpers */
>> +#define device_node dt_device_node
>> +#define of_phandle_args dt_phandle_args
>> +#define of_device_id dt_device_match
>> +#define of_match_node dt_match_node
>> +#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
>> +#define of_property_read_bool dt_property_read_bool
>> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
>> +
>> +/* Xen: Helpers to get device MMIO and IRQs */
>> +struct resource {
>> +    u64 addr;
>> +    u64 size;
>> +    unsigned int type;
>> +};
>> +
>> +#define resource_size(res) ((res)->size)
>> +
>> +#define platform_device device
>> +
>> +#define IORESOURCE_MEM 0
>> +#define IORESOURCE_IRQ 1
>> +
>> +static struct resource *platform_get_resource(struct platform_device *pdev,
>> +                          unsigned int type,
>> +                          unsigned int num)
>> +{
>> +    /*
>> +     * The resource is only used between 2 calls of platform_get_resource.
>> +     * It's quite ugly but it's avoid to add too much code in the part
>> +     * imported from Linux
>> +     */
>> +    static struct resource res;
>> +    struct acpi_iort_node *iort_node;
>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>> +    int ret = 0;
>> +
>> +    res.type = type;
>> +
>> +    switch (type) {
>> +    case IORESOURCE_MEM:
>> +        if (pdev->type == DEV_ACPI) {
>> +            ret = 1;
>> +            iort_node = pdev->acpi_node;
>> +            node_smmu_data =
>> +                (struct acpi_iort_smmu_v3 *)iort_node->node_data;
>> +
>> +            if (node_smmu_data != NULL) {
>> +                res.addr = node_smmu_data->base_address;
>> +                res.size = SZ_128K;
>> +                ret = 0;
>> +            }
>> +        } else {
>> +            ret = dt_device_get_address(dev_to_dt(pdev), num,
>> +                            &res.addr, &res.size);
>> +        }
>> +
>> +        return ((ret) ? NULL : &res);
>> +
>> +    case IORESOURCE_IRQ:
>> +        /* ACPI case not implemented as there is no use case for it */
>> +        ret = platform_get_irq(dev_to_dt(pdev), num);
>> +
>> +        if (ret < 0)
>> +            return NULL;
>> +
>> +        res.addr = ret;
>> +        res.size = 1;
>> +
>> +        return &res;
>> +
>> +    default:
>> +        return NULL;
>> +    }
>> +}
>> +
>> +static int platform_get_irq_byname(struct platform_device *pdev, const char *name)
>> +{
>> +    const struct dt_property *dtprop;
>> +    struct acpi_iort_node *iort_node;
>> +    struct acpi_iort_smmu_v3 *node_smmu_data;
>> +    int ret = 0;
>> +
>> +    if (pdev->type == DEV_ACPI) {
>> +        iort_node = pdev->acpi_node;
>> +        node_smmu_data = (struct acpi_iort_smmu_v3 *)iort_node->node_data;
>> +
>> +        if (node_smmu_data != NULL) {
>> +            if (!strcmp(name, "eventq"))
>> +                ret = node_smmu_data->event_gsiv;
>> +            else if (!strcmp(name, "priq"))
>> +                ret = node_smmu_data->pri_gsiv;
>> +            else if (!strcmp(name, "cmdq-sync"))
>> +                ret = node_smmu_data->sync_gsiv;
>> +            else if (!strcmp(name, "gerror"))
>> +                ret = node_smmu_data->gerr_gsiv;
>> +            else
>> +                ret = -EINVAL;
>> +        }
>> +    } else {
>> +        dtprop = dt_find_property(dev_to_dt(pdev), "interrupt-names", NULL);
>> +        if (!dtprop)
>> +            return -EINVAL;
>> +
>> +        if (!dtprop->value)
>> +            return -ENODATA;
>> +    }
>> +
>> +    return ret;
>> +}
>> +
>> +/*
>> + * Xen: Helpers for DMA allocation. Just the function name is reused for
>> + * porting code these allocation are not managed allocations
>>    */
>>   -#include <linux/acpi.h>
>> -#include <linux/acpi_iort.h>
>> -#include <linux/delay.h>
>> -#include <linux/dma-iommu.h>
>> -#include <linux/err.h>
>> -#include <linux/interrupt.h>
>> -#include <linux/iommu.h>
>> -#include <linux/iopoll.h>
>> -#include <linux/module.h>
>> -#include <linux/msi.h>
>> -#include <linux/of.h>
>> -#include <linux/of_address.h>
>> -#include <linux/of_iommu.h>
>> -#include <linux/of_platform.h>
>> -#include <linux/pci.h>
>> -#include <linux/platform_device.h>
>> -
>> -#include <linux/amba/bus.h>
>> -
>> -#include "io-pgtable.h"
>> +static void *dmam_alloc_coherent(struct device *dev, size_t size,
>> +               dma_addr_t *dma_handle, gfp_t gfp)
>> +{
>> +    void *vaddr;
>> +    unsigned long alignment = size;
>> +
>> +    /*
>> +     * _xzalloc requires that the (align & (align -1)) = 0. Most of the
>> +     * allocations in SMMU code should send the right value for size. In
>> +     * case this is not true print a warning and align to the size of a
>> +     * (void *)
>> +     */
>> +    if (size & (size - 1)) {
>> +        dev_warn(dev, "Fixing alignment for the DMA buffer\n");
>> +        alignment = sizeof(void *);
>> +    }
>> +
>> +    vaddr = _xzalloc(size, alignment);
>> +    if (!vaddr) {
>> +        dev_err(dev, "DMA allocation failed\n");
>> +        return NULL;
>> +    }
>> +
>> +    *dma_handle = virt_to_maddr(vaddr);
>> +
>> +    return vaddr;
>> +}
>> +
>> +
>> +static void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
>> +            dma_addr_t dma_handle)
>> +{
>> +    xfree(vaddr);
>> +}
>> +
>> +/* Xen: Stub out DMA domain related functions */
>> +#define iommu_get_dma_cookie(dom) 0
>> +#define iommu_put_dma_cookie(dom)
>> +
>> +/* Xen: Stub out module param related function */
>> +#define module_param_named(a, b, c, d)
>> +#define MODULE_PARM_DESC(a, b)
>> +
>> +#define dma_set_mask_and_coherent(d, b) 0
>> +
>> +#define of_dma_is_coherent(n) 0
>> +
>> +#define MODULE_DEVICE_TABLE(type, name)
>> +
>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>> +                       struct resource *res)
>> +{
>> +    void __iomem *ptr;
>> +
>> +    if (!res || res->type != IORESOURCE_MEM) {
>> +        dev_err(dev, "Invalid resource\n");
>> +        return ERR_PTR(-EINVAL);
>> +    }
>> +
>> +    ptr = ioremap_nocache(res->addr, res->size);
>> +    if (!ptr) {
>> +        dev_err(dev,
>> +            "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
>> +            res->addr, res->size);
>> +        return ERR_PTR(-ENOMEM);
>> +    }
>> +
>> +    return ptr;
>> +}
>> +
>> +/* Xen: Compatibility define for iommu_domain_geometry.*/
>> +struct iommu_domain_geometry {
>> +    dma_addr_t aperture_start; /* First address that can be mapped    */
>> +    dma_addr_t aperture_end;   /* Last address that can be mapped     */
>> +    bool force_aperture;       /* DMA only allowed in mappable range? */
>> +};
>> +
>> +
>> +/* Xen: Type definitions for iommu_domain */
>> +#define IOMMU_DOMAIN_UNMANAGED 0
>> +#define IOMMU_DOMAIN_DMA 1
>> +#define IOMMU_DOMAIN_IDENTITY 2
>> +
>> +/* Xen: Dummy iommu_domain */
>> +struct iommu_domain {
>> +    /* Runtime SMMU configuration for this iommu_domain */
>> +    struct arm_smmu_domain        *priv;
>> +    unsigned int type;
>> +
>> +    /* Dummy compatibility defines */
>> +    unsigned long pgsize_bitmap;
>> +    struct iommu_domain_geometry geometry;
>> +
>> +    atomic_t ref;
>> +    /*
>> +     * Used to link iommu_domain contexts for a same domain.
>> +     * There is at least one per-SMMU to used by the domain.
>> +     */
>> +    struct list_head        list;
>> +};
>> +
>> +/* Xen: Describes information required for a Xen domain */
>> +struct arm_smmu_xen_domain {
>> +    spinlock_t            lock;
>> +    /* List of iommu domains associated to this domain */
>> +    struct list_head        contexts;
>> +};
>> +
>> +/*
>> + * Xen: Information about each device stored in dev->archdata.iommu
>> + *
>> + * The dev->archdata.iommu stores the iommu_domain (runtime configuration of
>> + * the SMMU).
>> + */
>> +struct arm_smmu_xen_device {
>> +    struct iommu_domain *domain;
>> +};
>> +
>> +/*
>> + * Xen: io_pgtable compatibility defines.
>> + * Most of these are to port in the S1 translation code as is.
>> + */
>> +struct io_pgtable_ops {
>> +};
>> +
>> +struct iommu_gather_ops {
>> +    void (*tlb_flush_all)(void *cookie);
>> +    void (*tlb_add_flush)(unsigned long iova, size_t size, size_t granule,
>> +                  bool leaf, void *cookie);
>> +    void (*tlb_sync)(void *cookie);
>> +};
>> +
>> +struct io_pgtable_cfg {
>> +    /*
>> +     * IO_PGTABLE_QUIRK_ARM_NS: (ARM formats) Set NS and NSTABLE bits in
>> +     *    stage 1 PTEs, for hardware which insists on validating them
>> +     *    even in    non-secure state where they should normally be ignored.
>> +     *
>> +     * IO_PGTABLE_QUIRK_NO_PERMS: Ignore the IOMMU_READ, IOMMU_WRITE and
>> +     *    IOMMU_NOEXEC flags and map everything with full access, for
>> +     *    hardware which does not implement the permissions of a given
>> +     *    format, and/or requires some format-specific default value.
>> +     *
>> +     * IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching invalid
>> +     *    (unmapped) entries but the hardware might do so anyway, perform
>> +     *    TLB maintenance when mapping as well as when unmapping.
>> +     *
>> +     * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
>> +     *    PTEs, for Mediatek IOMMUs which treat it as a 33rd address bit
>> +     *    when the SoC is in "4GB mode" and they can only access the high
>> +     *    remap of DRAM (0x1_00000000 to 0x1_ffffffff).
>> +     *
>> +     * IO_PGTABLE_QUIRK_NO_DMA: Guarantees that the tables will only ever
>> +     *    be accessed by a fully cache-coherent IOMMU or CPU (e.g. for a
>> +     *    software-emulated IOMMU), such that pagetable updates need not
>> +     *    be treated as explicit DMA data.
>> +     */
>> +    #define IO_PGTABLE_QUIRK_ARM_NS        BIT(0)
>> +    #define IO_PGTABLE_QUIRK_NO_PERMS    BIT(1)
>> +    #define IO_PGTABLE_QUIRK_TLBI_ON_MAP    BIT(2)
>> +    #define IO_PGTABLE_QUIRK_ARM_MTK_4GB    BIT(3)
>> +    #define IO_PGTABLE_QUIRK_NO_DMA        BIT(4)
>> +    unsigned long            quirks;
>> +    unsigned long            pgsize_bitmap;
>> +    unsigned int            ias;
>> +    unsigned int            oas;
>> +    const struct iommu_gather_ops    *tlb;
>> +    struct device            *iommu_dev;
>> +
>> +    /* Low-level data specific to the table format */
>> +    union {
>> +        struct {
>> +            u64    ttbr[2];
>> +            u64    tcr;
>> +            u64    mair[2];
>> +        } arm_lpae_s1_cfg;
>> +
>> +        struct {
>> +            u64    vttbr;
>> +            u64    vtcr;
>> +        } arm_lpae_s2_cfg;
>> +
>> +        struct {
>> +            u32    ttbr[2];
>> +            u32    tcr;
>> +            u32    nmrr;
>> +            u32    prrr;
>> +        } arm_v7s_cfg;
>> +    };
>> +};
>> +
>> +enum io_pgtable_fmt {
>> +    ARM_32_LPAE_S1,
>> +    ARM_32_LPAE_S2,
>> +    ARM_64_LPAE_S1,
>> +    ARM_64_LPAE_S2,
>> +    ARM_V7S,
>> +    IO_PGTABLE_NUM_FMTS,
>> +};
>> +
>> +/*
>> + * Xen: The pgtable_ops are used by the S1 translations, so return the dummy
>> + * address.
>> + */
>> +#define alloc_io_pgtable_ops(f, c, o) ((struct io_pgtable_ops *)0x0)
> Is this correct? it will make the caller null check fail
>> +#define free_io_pgtable_ops(o)
>> +
>> +/* Xen: Define wrapper for requesting IRQs */
>> +#define IRQF_ONESHOT 0
>> +
>> +typedef void (*irq_handler_t)(int, void *, struct cpu_user_regs *);
>> +
>> +static inline int devm_request_irq(struct device *dev, unsigned int irq,
>> +                   irq_handler_t handler, unsigned long irqflags,
>> +                   const char *devname, void *dev_id)
>> +{
>> +    /*
>> +     * SMMUv3 implementation can support wired interrupt outputs that are
>> +     * edge-triggered. Set the irq type as per the spec.
>> +     */
>> +    irq_set_type(irq, IRQ_TYPE_EDGE_BOTH);
>> +    return request_irq(irq, irqflags, handler, devname, dev_id);
>> +}
>> +
>> +/*
>> + * Xen does not have a concept of threaded irq, but eventually we can use
>> + * tasklets to optimize the following function.
>> + */
>> +int devm_request_threaded_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
>> +                  irq_handler_t thread_fn, unsigned long irqflags,
>> +                  const char *devname, void *dev_id)
>> +{
>> +    return devm_request_irq(dev, irq, thread_fn, irqflags, devname, dev_id);
>> +}
>> +
>> +/* Xen: The mutex is used only during initialization so the typecast is safe */
>> +#define mutex spinlock
>> +#define mutex_init spin_lock_init
>> +#define mutex_lock spin_lock
>> +#define mutex_unlock spin_unlock
>> +
>> +#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \
>> +({ \
>> +    s_time_t deadline = NOW() + MICROSECS(timeout_us); \
>> +    for (;;) { \
>> +        (val) = op(addr); \
>> +        if (cond) \
>> +            break; \
>> +        if (NOW() > deadline) { \
>> +            (val) = op(addr); \
>> +            break; \
>> +        } \
>> +    udelay(sleep_us); \
>> +    } \
>> +    (cond) ? 0 : -ETIMEDOUT; \
>> +})
>> +
>> +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \
>> +    readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, timeout_us)
>> +
>> +#define VA_BITS 0 /* Only needed for S1 translations */
>>     /* MMIO registers */
>>   #define ARM_SMMU_IDR0            0x0
>> @@ -433,6 +819,7 @@ enum pri_resp {
>>       PRI_RESP_SUCC,
>>   };
>>   +#if 0 /* Xen: No MSI support in this iteration */
>>   enum arm_smmu_msi_index {
>>       EVTQ_MSI_INDEX,
>>       GERROR_MSI_INDEX,
>> @@ -457,6 +844,7 @@ static phys_addr_t arm_smmu_msi_cfg[ARM_SMMU_MAX_MSIS][3] = {
>>           ARM_SMMU_PRIQ_IRQ_CFG2,
>>       },
>>   };
>> +#endif
>>     struct arm_smmu_cmdq_ent {
>>       /* Common fields */
>> @@ -561,6 +949,8 @@ struct arm_smmu_s2_cfg {
>>       u16                vmid;
>>       u64                vttbr;
>>       u64                vtcr;
>> +    /* Xen: Domain associated to this configuration */
>> +    struct domain            *domain;
>>   };
>>     struct arm_smmu_strtab_ent {
>> @@ -635,9 +1025,21 @@ struct arm_smmu_device {
>>       struct arm_smmu_strtab_cfg    strtab_cfg;
>>         /* IOMMU core code handle */
>> +#if 0 /*Xen: Generic iommu_device ref not needed here */
>>       struct iommu_device        iommu;
>> +#endif
>> +    /* Xen: Need to keep a list of SMMU devices */
>> +    struct list_head                devices;
>>   };
>>   +/* Xen: Keep a list of devices associated with this driver */
>> +static DEFINE_SPINLOCK(arm_smmu_devices_lock);
>> +static LIST_HEAD(arm_smmu_devices);
>> +/* Xen: Helper for finding a device using fwnode */
>> +static
>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode);
>> +
>> +
>>   /* SMMU private data for each master */
>>   struct arm_smmu_master_data {
>>       struct arm_smmu_device        *smmu;
>> @@ -1232,7 +1634,7 @@ static void arm_smmu_handle_ppr(struct arm_smmu_device *smmu, u64 *evt)
>>         dev_info(smmu->dev, "unexpected PRI request received:\n");
>>       dev_info(smmu->dev,
>> -         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova 0x%016llx\n",
>> +         "\tsid 0x%08x.0x%05x: [%u%s] %sprivileged %s%s%s access at iova %#" PRIx64 "\n",
>>            sid, ssid, grpid, last ? "L" : "",
>>            evt[0] & PRIQ_0_PERM_PRIV ? "" : "un",
>>            evt[0] & PRIQ_0_PERM_READ ? "R" : "",
>> @@ -1346,6 +1748,8 @@ static irqreturn_t arm_smmu_combined_irq_handler(int irq, void *dev)
>>   {
>>       arm_smmu_gerror_handler(irq, dev);
>>       arm_smmu_cmdq_sync_handler(irq, dev);
>> +    /*Xen: No threaded irq. So call the required function from here */
>> +    arm_smmu_combined_irq_thread(irq, dev);
>>       return IRQ_WAKE_THREAD;
>>   }
>>   @@ -1358,6 +1762,46 @@ static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
>>       arm_smmu_cmdq_issue_cmd(smmu, &cmd);
>>   }
>>   +/*
>> + * Xen: Define the IRQ handlers for xen. The linux functions would be
>> + * modified to use the functions defined in the following code.
>> + */
>> +static void arm_smmu_evtq_thread_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_evtq_thread(irq, dev);
>> +}
>> +
>> +static void arm_smmu_priq_thread_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_priq_thread(irq, dev);
>> +}
>> +
>> +static void arm_smmu_cmdq_sync_handler_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_cmdq_sync_handler(irq, dev);
>> +}
>> +
>> +static void arm_smmu_gerror_handler_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_gerror_handler(irq, dev);
>> +}
>> +
>> +static void arm_smmu_combined_irq_handler_xen(int irq, void *dev,
>> +                       struct cpu_user_regs *regs)
>> +{
>> +    arm_smmu_combined_irq_handler(irq, dev);
>> +}
>> +
>> +#define arm_smmu_evtq_thread arm_smmu_evtq_thread_xen
>> +#define arm_smmu_priq_thread arm_smmu_priq_thread_xen
>> +#define arm_smmu_cmdq_sync_handler arm_smmu_cmdq_sync_handler_xen
>> +#define arm_smmu_gerror_handler arm_smmu_gerror_handler_xen
>> +#define arm_smmu_combined_irq_handler arm_smmu_combined_irq_handler_xen
>> +
>>   static void arm_smmu_tlb_sync(void *cookie)
>>   {
>>       struct arm_smmu_domain *smmu_domain = cookie;
>> @@ -1415,6 +1859,7 @@ static const struct iommu_gather_ops arm_smmu_gather_ops = {
>>       .tlb_sync    = arm_smmu_tlb_sync,
>>   };
>>   +#if 0 /*Xen: Unused functionality */
>>   /* IOMMU API */
>>   static bool arm_smmu_capable(enum iommu_cap cap)
>>   {
>> @@ -1427,6 +1872,7 @@ static bool arm_smmu_capable(enum iommu_cap cap)
>>           return false;
>>       }
>>   }
>> +#endif
>>     static struct iommu_domain *arm_smmu_domain_alloc(unsigned type)
>>   {
>> @@ -1546,9 +1992,16 @@ static int arm_smmu_domain_finalise_s2(struct arm_smmu_domain *smmu_domain,
>>       if (vmid < 0)
>>           return vmid;
>>   -    cfg->vmid    = (u16)vmid;
>> -    cfg->vttbr    = pgtbl_cfg->arm_lpae_s2_cfg.vttbr;
>> -    cfg->vtcr    = pgtbl_cfg->arm_lpae_s2_cfg.vtcr;
>> +    /*
>> +     * Xen: Get the ttbr and vtcr values
>> +     * vttbr: This is a shared value with the domain page table
>> +     * vtcr: The TCR settings are the same as CPU since the page
>> +     * tables are shared
>> +     */
>> +
>> +    cfg->vmid    = vmid;
>> +    cfg->vttbr    = page_to_maddr(cfg->domain->arch.p2m.root);
>> +    cfg->vtcr    = READ_SYSREG32(VTCR_EL2) & STRTAB_STE_2_VTCR_MASK;
>>       return 0;
>>   }
>>   @@ -1604,6 +2057,7 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain)
>>       if (smmu->features & ARM_SMMU_FEAT_COHERENCY)
>>           pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_NO_DMA;
>>   +    /* Xen: pgtbl_ops gets an invalid address */
>>       pgtbl_ops = alloc_io_pgtable_ops(fmt, &pgtbl_cfg, smmu_domain);
>>       if (!pgtbl_ops)
>>           return -ENOMEM;
> Will this not fail ?
Your are correct. The intent was to use an address that will never be valid for Xen. I'll go ahead and set this to 0x1.

>> @@ -1721,6 +2175,7 @@ out_unlock:
>>       return ret;
>>   }
>>   +#if 0 /* Xen: Unused functionality */
>>   static int arm_smmu_map(struct iommu_domain *domain, unsigned long iova,
>>               phys_addr_t paddr, size_t size, int prot)
>>   {
>> @@ -1772,6 +2227,7 @@ struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>>       put_device(dev);
>>       return dev ? dev_get_drvdata(dev) : NULL;
>>   }
>> +#endif
>>     static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
>>   {
>> @@ -1783,7 +2239,14 @@ static bool arm_smmu_sid_in_range(struct arm_smmu_device *smmu, u32 sid)
>>       return sid < limit;
>>   }
>>   +/* Xen: Unused */
>> +#if 0
>>   static struct iommu_ops arm_smmu_ops;
>> +#endif
>> +
>> +/* Xen: Redefine arm_smmu_ops to what fwspec should evaluate */
>> +static const struct iommu_ops arm_smmu_iommu_ops;
>> +#define arm_smmu_ops arm_smmu_iommu_ops
>>     static int arm_smmu_add_device(struct device *dev)
>>   {
>> @@ -1791,8 +2254,11 @@ static int arm_smmu_add_device(struct device *dev)
>>       struct arm_smmu_device *smmu;
>>       struct arm_smmu_master_data *master;
>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>> +#if 0 /*Xen: iommu_group is not needed */
>>       struct iommu_group *group;
>> +#endif
>>   +    /* Xen: fwspec->ops are not needed */
>>       if (!fwspec || fwspec->ops != &arm_smmu_ops)
>>           return -ENODEV;
>>       /*
>> @@ -1830,6 +2296,11 @@ static int arm_smmu_add_device(struct device *dev)
>>           }
>>       }
>>   +/*
>> + * Xen: Do not need an iommu group as the stream data is carried by the SMMU
>> + * master device object
>> + */
>> +#if 0
>>       group = iommu_group_get_for_dev(dev);
>>       if (!IS_ERR(group)) {
>>           iommu_group_put(group);
>> @@ -1837,8 +2308,16 @@ static int arm_smmu_add_device(struct device *dev)
>>       }
>>         return PTR_ERR_OR_ZERO(group);
>> +#endif
>> +    return 0;
>>   }
>>   +/*
>> + * Xen: We can potentially support this function and destroy a device. This
>> + * will be relevant for PCI hotplug. So, will be implemented as needed after
>> + * passthrough support is available.
>> + */
>> +#if 0
>>   static void arm_smmu_remove_device(struct device *dev)
>>   {
>>       struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>> @@ -1974,6 +2453,7 @@ static struct iommu_ops arm_smmu_ops = {
>>       .put_resv_regions    = arm_smmu_put_resv_regions,
>>       .pgsize_bitmap        = -1UL, /* Restricted during device attach */
>>   };
>> +#endif
>>     /* Probing and initialisation functions */
>>   static int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
>> @@ -2182,6 +2662,7 @@ static int arm_smmu_update_gbpa(struct arm_smmu_device *smmu, u32 set, u32 clr)
>>                         1, ARM_SMMU_POLL_TIMEOUT_US);
>>   }
>>   +#if 0 /* Xen: There is no MSI support as yet */
>>   static void arm_smmu_free_msis(void *data)
>>   {
>>       struct device *dev = data;
>> @@ -2247,12 +2728,15 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu)
>>       /* Add callback to free MSIs on teardown */
>>       devm_add_action(dev, arm_smmu_free_msis, dev);
>>   }
>> +#endif
>>     static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu)
>>   {
>>       int irq, ret;
>>   +#if 0 /*Xen: Cannot setup msis for now */
>>       arm_smmu_setup_msis(smmu);
>> +#endif
>>         /* Request interrupt lines */
>>       irq = smmu->evtq.q.irq;
>> @@ -2316,9 +2800,13 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu)
>>            * Cavium ThunderX2 implementation doesn't not support unique
>>            * irq lines. Use single irq line for all the SMMUv3 interrupts.
>>            */
>> -        ret = devm_request_threaded_irq(smmu->dev, irq,
>> +        /*
>> +         * Xen: Does not support threaded irqs, so serialise the setup.
>> +         * This is the same for pris and event interrupt lines on other
>> +         * systems
>> +         */
>> +        ret = devm_request_irq(smmu->dev, irq,
>>                       arm_smmu_combined_irq_handler,
>> -                    arm_smmu_combined_irq_thread,
>>                       IRQF_ONESHOT,
>>                       "arm-smmu-v3-combined-irq", smmu);
>>           if (ret < 0)
>> @@ -2542,8 +3030,14 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>>           smmu->features |= ARM_SMMU_FEAT_STALLS;
>>       }
>>   +/*
>> + * Xen: Block stage 1 translations. By doing this here we do not need to set the
>> + * domain->stage explicitly.
>> + */
>> +#if 0
>>       if (reg & IDR0_S1P)
>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S1;
>> +#endif
>>         if (reg & IDR0_S2P)
>>           smmu->features |= ARM_SMMU_FEAT_TRANS_S2;
>> @@ -2616,10 +3110,12 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>>       if (reg & IDR5_GRAN4K)
>>           smmu->pgsize_bitmap |= SZ_4K | SZ_2M | SZ_1G;
>>   +#if 0 /* Xen: SMMU ops do not have a pgsize_bitmap member for Xen */
>>       if (arm_smmu_ops.pgsize_bitmap == -1UL)
>>           arm_smmu_ops.pgsize_bitmap = smmu->pgsize_bitmap;
>>       else
>>           arm_smmu_ops.pgsize_bitmap |= smmu->pgsize_bitmap;
>> +#endif
>>         /* Output address size */
>>       switch (reg & IDR5_OAS_MASK << IDR5_OAS_SHIFT) {
>> @@ -2680,7 +3176,8 @@ static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
>>       struct device *dev = smmu->dev;
>>       struct acpi_iort_node *node;
>>   -    node = *(struct acpi_iort_node **)dev_get_platdata(dev);
>> +    /* Xen: Modification to get iort_node */
>> +    node = (struct acpi_iort_node *)dev->acpi_node;
>>         /* Retrieve SMMUv3 specific data */
>>       iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
>> @@ -2703,7 +3200,7 @@ static inline int arm_smmu_device_acpi_probe(struct platform_device *pdev,
>>   static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>                       struct arm_smmu_device *smmu)
>>   {
>> -    struct device *dev = &pdev->dev;
>> +    struct device *dev = pdev;
>>       u32 cells;
>>       int ret = -EINVAL;
>>   @@ -2716,6 +3213,7 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>>         parse_driver_options(smmu);
>>   +    /* Xen: of_dma_is_coherent is a stub till dt support is introduced */
>>       if (of_dma_is_coherent(dev->of_node))
>>           smmu->features |= ARM_SMMU_FEAT_COHERENCY;
>>   @@ -2734,9 +3232,11 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>   {
>>       int irq, ret;
>>       struct resource *res;
>> +#if 0 /*Xen: Do not need to setup sysfs */
>>       resource_size_t ioaddr;
>> +#endif
>>       struct arm_smmu_device *smmu;
>> -    struct device *dev = &pdev->dev;
>> +    struct device *dev = pdev;/* Xen: dev is ignored */
>>       bool bypass;
>>         smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
>> @@ -2763,7 +3263,9 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>           dev_err(dev, "MMIO region too small (%pr)\n", res);
>>           return -EINVAL;
>>       }
>> +#if 0 /*Xen: Do not need to setup sysfs */
>>       ioaddr = res->start;
>> +#endif
>>         smmu->base = devm_ioremap_resource(dev, res);
>>       if (IS_ERR(smmu->base))
>> @@ -2802,13 +3304,18 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>           return ret;
>>         /* Record our private device structure */
>> +    /* Xen: SMMU is not treated a a platform device*/
>> +#if 0
>>       platform_set_drvdata(pdev, smmu);
>> +#endif
>>         /* Reset the device */
>>       ret = arm_smmu_device_reset(smmu, bypass);
>>       if (ret)
>>           return ret;
>>   +/* Xen: Not creating an IOMMU device list for Xen */
>> +#if 0
>>       /* And we're up. Go go go! */
>>       ret = iommu_device_sysfs_add(&smmu->iommu, dev, NULL,
>>                        "smmu3.%pa", &ioaddr);
>> @@ -2844,9 +3351,20 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>>           if (ret)
>>               return ret;
>>       }
>> +#endif
>> +    /*
>> +     * Xen: Keep a list of all probed devices. This will be used to query
>> +     * the smmu devices based on the fwnode.
>> +     */
>> +    INIT_LIST_HEAD(&smmu->devices);
>> +    spin_lock(&arm_smmu_devices_lock);
>> +    list_add(&smmu->devices, &arm_smmu_devices);
>> +    spin_unlock(&arm_smmu_devices_lock);
>>       return 0;
>>   }
>>   +/* Xen: Unused function */
>> +#if 0
>>   static int arm_smmu_device_remove(struct platform_device *pdev)
>>   {
>>       struct arm_smmu_device *smmu = platform_get_drvdata(pdev);
>> @@ -2860,6 +3378,8 @@ static void arm_smmu_device_shutdown(struct platform_device *pdev)
>>   {
>>       arm_smmu_device_remove(pdev);
>>   }
>> +#endif
>> +
>>     static const struct of_device_id arm_smmu_of_match[] = {
>>       { .compatible = "arm,smmu-v3", },
>> @@ -2867,6 +3387,7 @@ static const struct of_device_id arm_smmu_of_match[] = {
>>   };
>>   MODULE_DEVICE_TABLE(of, arm_smmu_of_match);
>>   +#if 0
>>   static struct platform_driver arm_smmu_driver = {
>>       .driver    = {
>>           .name        = "arm-smmu-v3",
>> @@ -2883,3 +3404,316 @@ IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", NULL);
>>   MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
>>   MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
>>   MODULE_LICENSE("GPL v2");
>> +#endif
>> +
>> +/***** Start of Xen specific code *****/
>> +
>> +static int __must_check arm_smmu_iotlb_flush_all(struct domain *d)
>> +{
>> +    struct arm_smmu_xen_domain *smmu_domain = dom_iommu(d)->arch.priv;
>> +    struct iommu_domain *cfg;
>> +
>> +    spin_lock(&smmu_domain->lock);
>> +    list_for_each_entry(cfg, &smmu_domain->contexts, list) {
>> +        /*
>> +         * Only invalidate the context when SMMU is present.
>> +         * This is because the context initialization is delayed
>> +         * until a master has been added.
>> +         */
>> +        if (unlikely(!ACCESS_ONCE(cfg->priv->smmu)))
>> +            continue;
>> +        arm_smmu_tlb_inv_context(cfg->priv);
>> +    }
>> +    spin_unlock(&smmu_domain->lock);
>> +    return 0;
>> +}
>> +
>> +static int __must_check arm_smmu_iotlb_flush(struct domain *d,
>> +                         unsigned long gfn,
>> +                         unsigned int page_count)
>> +{
>> +    return arm_smmu_iotlb_flush_all(d);
>> +}
>> +
>> +static struct iommu_domain *arm_smmu_get_domain(struct domain *d,
>> +                        struct device *dev)
>> +{
>> +    struct iommu_domain *domain;
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +    struct arm_smmu_device *smmu;
>> +    struct arm_smmu_domain *smmu_domain;
>> +
>> +    xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    smmu = arm_smmu_get_by_fwnode(dev->iommu_fwspec->iommu_fwnode);
>> +    if (!smmu)
>> +        return NULL;
>> +
>> +    /*
>> +     * Loop through the &xen_domain->contexts to locate a context
>> +     * assigned to this SMMU
>> +     */
>> +    list_for_each_entry(domain, &xen_domain->contexts, list) {
>> +        smmu_domain = to_smmu_domain(domain);
>> +        if (smmu_domain->smmu == smmu)
>> +            return domain;
>> +    }
>> +
>> +    return NULL;
>> +}
>> +
>> +static void arm_smmu_destroy_iommu_domain(struct iommu_domain *domain)
>> +{
>> +    list_del(&domain->list);
>> +    arm_smmu_domain_free(domain);
>> +}
>> +
>> +static int arm_smmu_assign_dev(struct domain *d, u8 devfn,
>> +                   struct device *dev, u32 flag)
>> +{
>> +    int ret = 0;
>> +    struct iommu_domain *domain;
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +    struct arm_smmu_domain *arm_smmu;
>> +
>> +    xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    if (!dev->archdata.iommu) {
>> +        dev->archdata.iommu = xzalloc(struct arm_smmu_xen_device);
>> +        if (!dev->archdata.iommu)
>> +            return -ENOMEM;
>> +    }
>> +
>> +    ret = arm_smmu_add_device(dev);
>> +    if (ret)
>> +        return ret;
>> +
>> +    spin_lock(&xen_domain->lock);
>> +
>> +    /*
>> +     * Check to see if an iommu_domain already exists for this xen domain
>> +     * under the same SMMU
>> +     */
>> +    domain = arm_smmu_get_domain(d, dev);
>> +    if (!domain) {
>> +
>> +        domain = arm_smmu_domain_alloc(IOMMU_DOMAIN_DMA);
>> +        if (!domain) {
>> +            ret = -ENOMEM;
>> +            goto out;
>> +        }
>> +
>> +        arm_smmu = to_smmu_domain(domain);
>> +        arm_smmu->s2_cfg.domain = d;
>> +
>> +        /* Chain the new context to the domain */
>> +        list_add(&domain->list, &xen_domain->contexts);
>> +
>> +    }
>> +
>> +    ret = arm_smmu_attach_dev(domain, dev);
>> +    if (ret) {
>> +        if (domain->ref.counter == 0)
>> +            arm_smmu_destroy_iommu_domain(domain);
>> +    } else {
>> +        atomic_inc(&domain->ref);
>> +    }
>> +
>> +out:
>> +    spin_unlock(&xen_domain->lock);
>> +    return ret;
>> +}
>> +
>> +static int arm_smmu_deassign_dev(struct domain *d, struct device *dev)
>> +{
>> +    struct iommu_domain *domain = arm_smmu_get_domain(d, dev);
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +    struct arm_smmu_domain *arm_smmu = to_smmu_domain(domain);
>> +
>> +    xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    if (!arm_smmu || arm_smmu->s2_cfg.domain != d) {
>> +        dev_err(dev, " not attached to domain %d\n", d->domain_id);
>> +        return -ESRCH;
>> +    }
>> +
>> +    spin_lock(&xen_domain->lock);
>> +
>> +    arm_smmu_detach_dev(dev);
>> +    atomic_dec(&domain->ref);
>> +
>> +    if (domain->ref.counter == 0)
>> +        arm_smmu_destroy_iommu_domain(domain);
>> +
>> +    spin_unlock(&xen_domain->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static int arm_smmu_reassign_dev(struct domain *s, struct domain *t,
>> +                 u8 devfn,  struct device *dev)
>> +{
>> +    int ret = 0;
>> +
>> +    /* Don't allow remapping on other domain than hwdom */
>> +    if (t && t != hardware_domain)
>> +        return -EPERM;
>> +
>> +    if (t == s)
>> +        return 0;
>> +
>> +    ret = arm_smmu_deassign_dev(s, dev);
>> +    if (ret)
>> +        return ret;
>> +
>> +    if (t) {
>> +        /* No flags are defined for ARM. */
>> +        ret = arm_smmu_assign_dev(t, devfn, dev, 0);
>> +        if (ret)
>> +            return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int arm_smmu_iommu_domain_init(struct domain *d)
>> +{
>> +    struct arm_smmu_xen_domain *xen_domain;
>> +
>> +    xen_domain = xzalloc(struct arm_smmu_xen_domain);
>> +    if (!xen_domain)
>> +        return -ENOMEM;
>> +
>> +    spin_lock_init(&xen_domain->lock);
>> +    INIT_LIST_HEAD(&xen_domain->contexts);
>> +
>> +    dom_iommu(d)->arch.priv = xen_domain;
>> +
>> +    return 0;
>> +}
>> +
>> +static void __hwdom_init arm_smmu_iommu_hwdom_init(struct domain *d)
>> +{
>> +}
>> +
>> +static void arm_smmu_iommu_domain_teardown(struct domain *d)
>> +{
>> +    struct arm_smmu_xen_domain *xen_domain = dom_iommu(d)->arch.priv;
>> +
>> +    ASSERT(list_empty(&xen_domain->contexts));
>> +    xfree(xen_domain);
>> +}
>> +
>> +static int __must_check arm_smmu_map_page(struct domain *d, unsigned long gfn,
>> +            unsigned long mfn, unsigned int flags)
>> +{
>> +    p2m_type_t t;
>> +
>> +    /*
>> +     * Grant mappings can be used for DMA requests. The dev_bus_addr
>> +     * returned by the hypercall is the MFN (not the IPA). For device
>> +     * protected by an IOMMU, Xen needs to add a 1:1 mapping in the domain
>> +     * p2m to allow DMA request to work.
>> +     * This is only valid when the domain is directed mapped. Hence this
>> +     * function should only be used by gnttab code with gfn == mfn.
>> +     */
>> +    BUG_ON(!is_domain_direct_mapped(d));
>> +    BUG_ON(mfn != gfn);
>> +
>> +    /* We only support readable and writable flags */
>> +    if (!(flags & (IOMMUF_readable | IOMMUF_writable)))
>> +        return -EINVAL;
>> +
>> +    t = (flags & IOMMUF_writable) ? p2m_iommu_map_rw : p2m_iommu_map_ro;
>> +
>> +    /*
>> +     * The function guest_physmap_add_entry replaces the current mapping
>> +     * if there is already one...
>> +     */
>> +    return guest_physmap_add_entry(d, _gfn(gfn), _mfn(mfn), 0, t);
>> +}
>> +
>> +static int __must_check arm_smmu_unmap_page(struct domain *d, unsigned long gfn)
>> +{
>> +    /*
>> +     * This function should only be used by gnttab code when the domain
>> +     * is direct mapped
>> +     */
>> +    if (!is_domain_direct_mapped(d))
>> +        return -EINVAL;
>> +
>> +    return guest_physmap_remove_page(d, _gfn(gfn), _mfn(gfn), 0);
>> +}
>> +
>> +static const struct iommu_ops arm_smmu_iommu_ops = {
>> +    .init = arm_smmu_iommu_domain_init,
>> +    .hwdom_init = arm_smmu_iommu_hwdom_init,
>> +    .teardown = arm_smmu_iommu_domain_teardown,
>> +    .iotlb_flush = arm_smmu_iotlb_flush,
>> +    .iotlb_flush_all = arm_smmu_iotlb_flush_all,
>> +    .assign_device = arm_smmu_assign_dev,
>> +    .reassign_device = arm_smmu_reassign_dev,
>> +    .map_page = arm_smmu_map_page,
>> +    .unmap_page = arm_smmu_unmap_page,
>> +};
>> +
>> +static
>> +struct arm_smmu_device *arm_smmu_get_by_fwnode(struct fwnode_handle *fwnode)
>> +{
>> +    struct arm_smmu_device *smmu = NULL;
>> +
>> +    spin_lock(&arm_smmu_devices_lock);
>> +    list_for_each_entry(smmu, &arm_smmu_devices, devices) {
>> +        if (smmu->dev->fwnode == fwnode)
>> +            break;
>> +    }
>> +    spin_unlock(&arm_smmu_devices_lock);
>> +
>> +    return smmu;
>> +}
>> +
>> +static __init int arm_smmu_dt_init(struct dt_device_node *dev,
>> +                   const void *data)
>> +{
>> +    int rc;
>> +
>> +    /*
>> +     * Even if the device can't be initialized, we don't want to
>> +     * give the SMMU device to dom0.
>> +     */
>> +    dt_device_set_used_by(dev, DOMID_XEN);
>> +
>> +    rc = arm_smmu_device_probe(dt_to_dev(dev));
>> +    if (rc)
>> +        return rc;
>> +
>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>> +
>> +    return 0;
>> +}
>> +
>> +DT_DEVICE_START(smmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>> +    .dt_match = arm_smmu_of_match,
>> +    .init = arm_smmu_dt_init,
>> +DT_DEVICE_END
>> +
>> +#ifdef CONFIG_ACPI
>> +/* Set up the IOMMU */
>> +static int __init arm_smmu_acpi_init(const void *data)
>> +{
>> +    int rc;
>> +
>> +    rc = arm_smmu_device_probe((struct device *)data);
>> +    if (rc)
>> +        return rc;
>> +
>> +    iommu_set_ops(&arm_smmu_iommu_ops);
>> +    return 0;
>> +}
>> +
>> +ACPI_DEVICE_START(asmmuv3, "ARM SMMU V3", DEVICE_IOMMU)
>> +    .class_type = ACPI_IORT_NODE_SMMU_V3,
>> +    .init = arm_smmu_acpi_init,
>> +ACPI_DEVICE_END
>> +
>> +#endif
>> diff --git a/xen/include/xen/linux_compat.h b/xen/include/xen/linux_compat.h
>> new file mode 100644
>> index 0000000000..8037be0a3e
>> --- /dev/null
>> +++ b/xen/include/xen/linux_compat.h
>> @@ -0,0 +1,84 @@
>> +/******************************************************************************
>> + * include/xen/linux_compat.h
>> + *
>> + * Compatibility defines for porting code from Linux to Xen
>> + *
>> + * Copyright (c) 2017 Linaro Limited
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __XEN_LINUX_COMPAT_H__
>> +#define __XEN_LINUX_COMPAT_H__
>> +
>> +#include <asm/types.h>
>> +
>> +typedef paddr_t phys_addr_t;
>> +typedef paddr_t dma_addr_t;
>> +
>> +typedef unsigned int gfp_t;
>> +#define GFP_KERNEL 0
>> +#define __GFP_ZERO 0x01U
>> +
>> +/* Helpers for IRQ functions */
>> +#define free_irq release_irq
>> +
>> +enum irqreturn {
>> +    IRQ_NONE,
>> +    IRQ_HANDLED,
>> +    IRQ_WAKE_THREAD,
>> +};
>> +
>> +typedef enum irqreturn irqreturn_t;
>> +
>> +/* Device logger functions */
>> +#define dev_dbg(dev, fmt, ...) printk(XENLOG_DEBUG fmt, ## __VA_ARGS__)
>> +#define dev_notice(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
>> +#define dev_warn(dev, fmt, ...) printk(XENLOG_WARNING fmt, ## __VA_ARGS__)
>> +#define dev_err(dev, fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>> +#define dev_info(dev, fmt, ...) printk(XENLOG_INFO fmt, ## __VA_ARGS__)
>> +
>> +#define dev_err_ratelimited(dev, fmt, ...)                  \
>> +     printk(XENLOG_ERR fmt, ## __VA_ARGS__)
>> +
>> +#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
>> +
>> +/* Alias to Xen allocation helpers */
>> +#define kfree xfree
>> +#define kmalloc(size, flags) ({\
>> +    void *__ret_alloc = NULL; \
>> +    if (flags & __GFP_ZERO) \
>> +        __ret_alloc = _xzalloc(size, sizeof(void *)); \
>> +    else \
>> +        __ret_alloc = _xmalloc(size, sizeof(void *)); \
>> +    __ret_alloc; \
>> +})
>> +#define kzalloc(size, flags)        _xzalloc(size, sizeof(void *))
>> +#define devm_kzalloc(dev, size, flags)  _xzalloc(size, sizeof(void *))
>> +#define kmalloc_array(size, n, flags) ({\
>> +    void *__ret_alloc = NULL; \
>> +    if (flags & __GFP_ZERO) \
>> +        __ret_alloc = _xzalloc_array(size, sizeof(void *), n); \
>> +    else \
>> +        __ret_alloc = _xmalloc_array(size, sizeof(void *), n); \
>> +    __ret_alloc; \
>> +})
>> +
>> +/* Alias to Xen time functions */
>> +#define ktime_t s_time_t
>> +#define ktime_get()             (NOW())
>> +#define ktime_add_us(t,i)       (t + MICROSECS(i))
>> +#define ktime_compare(t,i)      (t > (i))
>> +
>> +#endif /* __XEN_LINUX_COMPAT_H__ */
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xenproject.org
> https://lists.xenproject.org/mailman/listinfo/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

[PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Sameer Goel]

Pull common defines for SMMU drives in a local header.

Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
---
 xen/drivers/passthrough/arm/arm_smmu.h | 125 +++++++++++++++++++++++++++++++++
 xen/drivers/passthrough/arm/smmu-v3.c  |  96 +------------------------
 xen/drivers/passthrough/arm/smmu.c     | 104 +--------------------------
 3 files changed, 128 insertions(+), 197 deletions(-)
 create mode 100644 xen/drivers/passthrough/arm/arm_smmu.h

diff --git a/xen/drivers/passthrough/arm/arm_smmu.h b/xen/drivers/passthrough/arm/arm_smmu.h
new file mode 100644
index 0000000000..f49dceb5b4
--- /dev/null
+++ b/xen/drivers/passthrough/arm/arm_smmu.h
@@ -0,0 +1,125 @@
+/******************************************************************************
+ * ./arm_smmu.h
+ *
+ * Common compatibility defines and data_structures for porting arm smmu
+ * drivers from Linux.
+ *
+ * Copyright (c) 2017 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_SMMU_H__
+#define __ARM_SMMU_H__
+
+
+/* Alias to Xen device tree helpers */
+#define device_node dt_device_node
+#define of_phandle_args dt_phandle_args
+#define of_device_id dt_device_match
+#define of_match_node dt_match_node
+#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
+#define of_property_read_bool dt_property_read_bool
+#define of_parse_phandle_with_args dt_parse_phandle_with_args
+
+/* Helpers to get device MMIO and IRQs */
+struct resource {
+    u64 addr;
+    u64 size;
+    unsigned int type;
+};
+
+#define resource_size(res) ((res)->size)
+
+#define platform_device device
+
+#define IORESOURCE_MEM 0
+#define IORESOURCE_IRQ 1
+
+/* Stub out DMA domain related functions */
+#define iommu_get_dma_cookie(dom) 0
+#define iommu_put_dma_cookie(dom)
+
+#define VA_BITS		0 /* Only used for configuring stage-1 input size */
+
+#define MODULE_DEVICE_TABLE(type, name)
+#define module_param_named(name, value, type, perm)
+#define MODULE_PARM_DESC(_parm, desc)
+
+#define dma_set_mask_and_coherent(d, b)	0
+#define of_dma_is_coherent(n)	0
+
+static void __iomem *devm_ioremap_resource(struct device *dev,
+					   struct resource *res)
+{
+    void __iomem *ptr;
+
+    if ( !res || res->type != IORESOURCE_MEM )
+    {
+        dev_err(dev, "Invalid resource\n");
+        return ERR_PTR(-EINVAL);
+    }
+
+    ptr = ioremap_nocache(res->addr, res->size);
+    if ( !ptr )
+    {
+        dev_err(dev, "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
+                res->addr, res->size);
+        return ERR_PTR(-ENOMEM);
+    }
+
+    return ptr;
+}
+
+/*
+ * Domain type definitions. Not really needed for Xen, defining to port
+ * Linux code as-is
+ */
+#define IOMMU_DOMAIN_UNMANAGED 0
+#define IOMMU_DOMAIN_DMA 1
+#define IOMMU_DOMAIN_IDENTITY 2
+
+/* Xen: Compatibility define for iommu_domain_geometry.*/
+struct iommu_domain_geometry {
+    dma_addr_t aperture_start; /* First address that can be mapped    */
+    dma_addr_t aperture_end;   /* Last address that can be mapped     */
+    bool force_aperture;       /* DMA only allowed in mappable range? */
+};
+
+/* Xen: Dummy iommu_domain */
+struct iommu_domain {
+    /* Runtime SMMU configuration for this iommu_domain */
+    struct arm_smmu_domain		*priv;
+    unsigned int			type;
+
+    /* Dummy compatibility defines */
+    unsigned long pgsize_bitmap;
+    struct iommu_domain_geometry geometry;
+
+    atomic_t ref;
+    /* Used to link iommu_domain contexts for a same domain.
+     * There is at least one per-SMMU to used by the domain.
+     */
+    struct list_head		list;
+};
+
+/* Xen: Describes information required for a Xen domain */
+struct arm_smmu_xen_domain {
+    spinlock_t			lock;
+    /* List of iommu domains associated to this domain */
+    struct list_head		contexts;
+};
+
+#endif /* __ARM_SMMU_H__ */
+
diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
index f43485fe6e..f0a61521fb 100644
--- a/xen/drivers/passthrough/arm/smmu-v3.c
+++ b/xen/drivers/passthrough/arm/smmu-v3.c
@@ -49,28 +49,7 @@
 #include <asm/io.h>
 #include <asm/platform.h>
 
-/* Alias to Xen device tree helpers */
-#define device_node dt_device_node
-#define of_phandle_args dt_phandle_args
-#define of_device_id dt_device_match
-#define of_match_node dt_match_node
-#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
-#define of_property_read_bool dt_property_read_bool
-#define of_parse_phandle_with_args dt_parse_phandle_with_args
-
-/* Xen: Helpers to get device MMIO and IRQs */
-struct resource {
-	u64 addr;
-	u64 size;
-	unsigned int type;
-};
-
-#define resource_size(res) ((res)->size)
-
-#define platform_device device
-
-#define IORESOURCE_MEM 0
-#define IORESOURCE_IRQ 1
+#include "arm_smmu.h"
 
 static struct resource *platform_get_resource(struct platform_device *pdev,
 					      unsigned int type,
@@ -200,79 +179,6 @@ static void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
 	xfree(vaddr);
 }
 
-/* Xen: Stub out DMA domain related functions */
-#define iommu_get_dma_cookie(dom) 0
-#define iommu_put_dma_cookie(dom)
-
-/* Xen: Stub out module param related function */
-#define module_param_named(a, b, c, d)
-#define MODULE_PARM_DESC(a, b)
-
-#define dma_set_mask_and_coherent(d, b) 0
-
-#define of_dma_is_coherent(n) 0
-
-#define MODULE_DEVICE_TABLE(type, name)
-
-static void __iomem *devm_ioremap_resource(struct device *dev,
-					   struct resource *res)
-{
-	void __iomem *ptr;
-
-	if (!res || res->type != IORESOURCE_MEM) {
-		dev_err(dev, "Invalid resource\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	ptr = ioremap_nocache(res->addr, res->size);
-	if (!ptr) {
-		dev_err(dev,
-			"ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
-			res->addr, res->size);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	return ptr;
-}
-
-/* Xen: Compatibility define for iommu_domain_geometry.*/
-struct iommu_domain_geometry {
-	dma_addr_t aperture_start; /* First address that can be mapped    */
-	dma_addr_t aperture_end;   /* Last address that can be mapped     */
-	bool force_aperture;       /* DMA only allowed in mappable range? */
-};
-
-
-/* Xen: Type definitions for iommu_domain */
-#define IOMMU_DOMAIN_UNMANAGED 0
-#define IOMMU_DOMAIN_DMA 1
-#define IOMMU_DOMAIN_IDENTITY 2
-
-/* Xen: Dummy iommu_domain */
-struct iommu_domain {
-	/* Runtime SMMU configuration for this iommu_domain */
-	struct arm_smmu_domain		*priv;
-	unsigned int type;
-
-	/* Dummy compatibility defines */
-	unsigned long pgsize_bitmap;
-	struct iommu_domain_geometry geometry;
-
-	atomic_t ref;
-	/*
-	 * Used to link iommu_domain contexts for a same domain.
-	 * There is at least one per-SMMU to used by the domain.
-	 */
-	struct list_head		list;
-};
-
-/* Xen: Describes information required for a Xen domain */
-struct arm_smmu_xen_domain {
-	spinlock_t			lock;
-	/* List of iommu domains associated to this domain */
-	struct list_head		contexts;
-};
-
 /*
  * Xen: Information about each device stored in dev->archdata.iommu
  *
diff --git a/xen/drivers/passthrough/arm/smmu.c b/xen/drivers/passthrough/arm/smmu.c
index ad956d5b8d..4c04391e21 100644
--- a/xen/drivers/passthrough/arm/smmu.c
+++ b/xen/drivers/passthrough/arm/smmu.c
@@ -41,6 +41,7 @@
 #include <xen/irq.h>
 #include <xen/lib.h>
 #include <xen/list.h>
+#include <xen/linux_compat.h>
 #include <xen/mm.h>
 #include <xen/vmap.h>
 #include <xen/rbtree.h>
@@ -51,36 +52,13 @@
 #include <asm/io.h>
 #include <asm/platform.h>
 
+#include "arm_smmu.h" /* Not a self contained header. So last in the list */
 /* Xen: The below defines are redefined within the file. Undef it */
 #undef SCTLR_AFE
 #undef SCTLR_TRE
 #undef SCTLR_M
 #undef TTBCR_EAE
 
-/* Alias to Xen device tree helpers */
-#define device_node dt_device_node
-#define of_phandle_args dt_phandle_args
-#define of_device_id dt_device_match
-#define of_match_node dt_match_node
-#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
-#define of_property_read_bool dt_property_read_bool
-#define of_parse_phandle_with_args dt_parse_phandle_with_args
-
-/* Xen: Helpers to get device MMIO and IRQs */
-struct resource
-{
-	u64 addr;
-	u64 size;
-	unsigned int type;
-};
-
-#define resource_size(res) (res)->size;
-
-#define platform_device device
-
-#define IORESOURCE_MEM 0
-#define IORESOURCE_IRQ 1
-
 static struct resource *platform_get_resource(struct platform_device *pdev,
 					      unsigned int type,
 					      unsigned int num)
@@ -118,58 +96,6 @@ static struct resource *platform_get_resource(struct platform_device *pdev,
 
 /* Xen: Helpers for IRQ functions */
 #define request_irq(irq, func, flags, name, dev) request_irq(irq, flags, func, name, dev)
-#define free_irq release_irq
-
-enum irqreturn {
-	IRQ_NONE	= (0 << 0),
-	IRQ_HANDLED	= (1 << 0),
-};
-
-typedef enum irqreturn irqreturn_t;
-
-/* Device logger functions
- * TODO: Handle PCI
- */
-#define dev_print(dev, lvl, fmt, ...)						\
-	 printk(lvl "smmu: %s: " fmt, dt_node_full_name(dev_to_dt(dev)), ## __VA_ARGS__)
-
-#define dev_dbg(dev, fmt, ...) dev_print(dev, XENLOG_DEBUG, fmt, ## __VA_ARGS__)
-#define dev_notice(dev, fmt, ...) dev_print(dev, XENLOG_INFO, fmt, ## __VA_ARGS__)
-#define dev_warn(dev, fmt, ...) dev_print(dev, XENLOG_WARNING, fmt, ## __VA_ARGS__)
-#define dev_err(dev, fmt, ...) dev_print(dev, XENLOG_ERR, fmt, ## __VA_ARGS__)
-
-#define dev_err_ratelimited(dev, fmt, ...)					\
-	 dev_print(dev, XENLOG_ERR, fmt, ## __VA_ARGS__)
-
-#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
-
-/* Alias to Xen allocation helpers */
-#define kfree xfree
-#define kmalloc(size, flags)		_xmalloc(size, sizeof(void *))
-#define kzalloc(size, flags)		_xzalloc(size, sizeof(void *))
-#define devm_kzalloc(dev, size, flags)	_xzalloc(size, sizeof(void *))
-#define kmalloc_array(size, n, flags)	_xmalloc_array(size, sizeof(void *), n)
-
-static void __iomem *devm_ioremap_resource(struct device *dev,
-					   struct resource *res)
-{
-	void __iomem *ptr;
-
-	if (!res || res->type != IORESOURCE_MEM) {
-		dev_err(dev, "Invalid resource\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	ptr = ioremap_nocache(res->addr, res->size);
-	if (!ptr) {
-		dev_err(dev,
-			"ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
-			res->addr, res->size);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	return ptr;
-}
 
 /* Xen doesn't handle IOMMU fault */
 #define report_iommu_fault(...)	1
@@ -196,32 +122,6 @@ static inline int pci_for_each_dma_alias(struct pci_dev *pdev,
 #define PHYS_MASK_SHIFT		PADDR_BITS
 typedef paddr_t phys_addr_t;
 
-#define VA_BITS		0	/* Only used for configuring stage-1 input size */
-
-#define MODULE_DEVICE_TABLE(type, name)
-#define module_param_named(name, value, type, perm)
-#define MODULE_PARM_DESC(_parm, desc)
-
-/* Xen: Dummy iommu_domain */
-struct iommu_domain
-{
-	/* Runtime SMMU configuration for this iommu_domain */
-	struct arm_smmu_domain		*priv;
-
-	atomic_t ref;
-	/* Used to link iommu_domain contexts for a same domain.
-	 * There is at least one per-SMMU to used by the domain.
-	 * */
-	struct list_head		list;
-};
-
-/* Xen: Describes informations required for a Xen domain */
-struct arm_smmu_xen_domain {
-	spinlock_t			lock;
-	/* List of context (i.e iommu_domain) associated to this domain */
-	struct list_head		contexts;
-};
-
 /*
  * Xen: Information about each device stored in dev->archdata.iommu
  *
-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Roger Pau Monné]

On Thu, Feb 08, 2018 at 08:10:54PM -0700, Sameer Goel wrote:
> Pull common defines for SMMU drives in a local header.
> 
> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
> ---
>  xen/drivers/passthrough/arm/arm_smmu.h | 125 +++++++++++++++++++++++++++++++++
>  xen/drivers/passthrough/arm/smmu-v3.c  |  96 +------------------------
>  xen/drivers/passthrough/arm/smmu.c     | 104 +--------------------------
>  3 files changed, 128 insertions(+), 197 deletions(-)
>  create mode 100644 xen/drivers/passthrough/arm/arm_smmu.h
> 
> diff --git a/xen/drivers/passthrough/arm/arm_smmu.h b/xen/drivers/passthrough/arm/arm_smmu.h
> new file mode 100644
> index 0000000000..f49dceb5b4
> --- /dev/null
> +++ b/xen/drivers/passthrough/arm/arm_smmu.h
> @@ -0,0 +1,125 @@
> +/******************************************************************************
> + * ./arm_smmu.h
> + *
> + * Common compatibility defines and data_structures for porting arm smmu
> + * drivers from Linux.
> + *
> + * Copyright (c) 2017 Linaro Limited
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ARM_SMMU_H__
> +#define __ARM_SMMU_H__
> +
> +
> +/* Alias to Xen device tree helpers */
> +#define device_node dt_device_node
> +#define of_phandle_args dt_phandle_args
> +#define of_device_id dt_device_match
> +#define of_match_node dt_match_node
> +#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))

Break the line.

> +#define of_property_read_bool dt_property_read_bool
> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
> +
> +/* Helpers to get device MMIO and IRQs */
> +struct resource {
> +    u64 addr;
> +    u64 size;

uint64_t is preferred rather than u64.

> +    unsigned int type;
> +};
> +
> +#define resource_size(res) ((res)->size)
> +
> +#define platform_device device
> +
> +#define IORESOURCE_MEM 0
> +#define IORESOURCE_IRQ 1
> +
> +/* Stub out DMA domain related functions */
> +#define iommu_get_dma_cookie(dom) 0
> +#define iommu_put_dma_cookie(dom)
> +
> +#define VA_BITS		0 /* Only used for configuring stage-1 input size */
> +
> +#define MODULE_DEVICE_TABLE(type, name)
> +#define module_param_named(name, value, type, perm)
> +#define MODULE_PARM_DESC(_parm, desc)
> +
> +#define dma_set_mask_and_coherent(d, b)	0
> +#define of_dma_is_coherent(n)	0
> +
> +static void __iomem *devm_ioremap_resource(struct device *dev,
> +					   struct resource *res)

Aligment, please use spaces.

Also, is __iomem needed here at all?

> +{
> +    void __iomem *ptr;

Same question about __iomem attribute.

> +
> +    if ( !res || res->type != IORESOURCE_MEM )
> +    {
> +        dev_err(dev, "Invalid resource\n");
> +        return ERR_PTR(-EINVAL);
> +    }
> +
> +    ptr = ioremap_nocache(res->addr, res->size);
> +    if ( !ptr )
> +    {
> +        dev_err(dev, "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
> +                res->addr, res->size);
> +        return ERR_PTR(-ENOMEM);
> +    }
> +
> +    return ptr;
> +}
> +
> +/*
> + * Domain type definitions. Not really needed for Xen, defining to port
> + * Linux code as-is
> + */
> +#define IOMMU_DOMAIN_UNMANAGED 0
> +#define IOMMU_DOMAIN_DMA 1
> +#define IOMMU_DOMAIN_IDENTITY 2
> +
> +/* Xen: Compatibility define for iommu_domain_geometry.*/
> +struct iommu_domain_geometry {
> +    dma_addr_t aperture_start; /* First address that can be mapped    */
> +    dma_addr_t aperture_end;   /* Last address that can be mapped     */
> +    bool force_aperture;       /* DMA only allowed in mappable range? */
> +};
> +
> +/* Xen: Dummy iommu_domain */
> +struct iommu_domain {
> +    /* Runtime SMMU configuration for this iommu_domain */
> +    struct arm_smmu_domain		*priv;
> +    unsigned int			type;
> +
> +    /* Dummy compatibility defines */
> +    unsigned long pgsize_bitmap;
> +    struct iommu_domain_geometry geometry;
> +
> +    atomic_t ref;
> +    /* Used to link iommu_domain contexts for a same domain.
> +     * There is at least one per-SMMU to used by the domain.
> +     */
> +    struct list_head		list;

No tabs please. And if you want to align the fields, please do so
uniformly for all the structs in the file.

> +};
> +
> +/* Xen: Describes information required for a Xen domain */
> +struct arm_smmu_xen_domain {
> +    spinlock_t			lock;
> +    /* List of iommu domains associated to this domain */
> +    struct list_head		contexts;
> +};

Tabs.

> +
> +#endif /* __ARM_SMMU_H__ */
> +
> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
> index f43485fe6e..f0a61521fb 100644
> --- a/xen/drivers/passthrough/arm/smmu-v3.c
> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
> @@ -49,28 +49,7 @@
>  #include <asm/io.h>
>  #include <asm/platform.h>
>  
> -/* Alias to Xen device tree helpers */
> -#define device_node dt_device_node
> -#define of_phandle_args dt_phandle_args
> -#define of_device_id dt_device_match
> -#define of_match_node dt_match_node
> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
> -#define of_property_read_bool dt_property_read_bool
> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
> -
> -/* Xen: Helpers to get device MMIO and IRQs */
> -struct resource {
> -	u64 addr;
> -	u64 size;
> -	unsigned int type;
> -};
> -
> -#define resource_size(res) ((res)->size)
> -
> -#define platform_device device
> -
> -#define IORESOURCE_MEM 0
> -#define IORESOURCE_IRQ 1

You introduce the above code in patch 5, and remove it in patch 6, is
this really needed?

Ie: why not simply introduce this code directly in this patch?

> diff --git a/xen/drivers/passthrough/arm/smmu.c b/xen/drivers/passthrough/arm/smmu.c
> index ad956d5b8d..4c04391e21 100644
> --- a/xen/drivers/passthrough/arm/smmu.c
> +++ b/xen/drivers/passthrough/arm/smmu.c
> @@ -41,6 +41,7 @@
>  #include <xen/irq.h>
>  #include <xen/lib.h>
>  #include <xen/list.h>
> +#include <xen/linux_compat.h>
>  #include <xen/mm.h>
>  #include <xen/vmap.h>
>  #include <xen/rbtree.h>
> @@ -51,36 +52,13 @@
>  #include <asm/io.h>
>  #include <asm/platform.h>
>  
> +#include "arm_smmu.h" /* Not a self contained header. So last in the list */
>  /* Xen: The below defines are redefined within the file. Undef it */
>  #undef SCTLR_AFE
>  #undef SCTLR_TRE
>  #undef SCTLR_M
>  #undef TTBCR_EAE
>  
> -/* Alias to Xen device tree helpers */
> -#define device_node dt_device_node
> -#define of_phandle_args dt_phandle_args
> -#define of_device_id dt_device_match
> -#define of_match_node dt_match_node
> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
> -#define of_property_read_bool dt_property_read_bool
> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
> -
> -/* Xen: Helpers to get device MMIO and IRQs */
> -struct resource
> -{
> -	u64 addr;
> -	u64 size;
> -	unsigned int type;
> -};
> -
> -#define resource_size(res) (res)->size;
> -
> -#define platform_device device
> -
> -#define IORESOURCE_MEM 0
> -#define IORESOURCE_IRQ 1
> -
>  static struct resource *platform_get_resource(struct platform_device *pdev,
>  					      unsigned int type,
>  					      unsigned int num)
> @@ -118,58 +96,6 @@ static struct resource *platform_get_resource(struct platform_device *pdev,
>  
>  /* Xen: Helpers for IRQ functions */
>  #define request_irq(irq, func, flags, name, dev) request_irq(irq, flags, func, name, dev)
> -#define free_irq release_irq
> -
> -enum irqreturn {
> -	IRQ_NONE	= (0 << 0),
> -	IRQ_HANDLED	= (1 << 0),
> -};
> -
> -typedef enum irqreturn irqreturn_t;

You remove the irqreturn enum without adding any replacement, is this
really unused?

Thanks, Roger.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Julien Grall]

Hi,

On 02/09/2018 10:43 AM, Roger Pau Monné wrote:
>> +    unsigned int type;
>> +};
>> +
>> +#define resource_size(res) ((res)->size)
>> +
>> +#define platform_device device
>> +
>> +#define IORESOURCE_MEM 0
>> +#define IORESOURCE_IRQ 1
>> +
>> +/* Stub out DMA domain related functions */
>> +#define iommu_get_dma_cookie(dom) 0
>> +#define iommu_put_dma_cookie(dom)
>> +
>> +#define VA_BITS		0 /* Only used for configuring stage-1 input size */
>> +
>> +#define MODULE_DEVICE_TABLE(type, name)
>> +#define module_param_named(name, value, type, perm)
>> +#define MODULE_PARM_DESC(_parm, desc)
>> +
>> +#define dma_set_mask_and_coherent(d, b)	0
>> +#define of_dma_is_coherent(n)	0
>> +
>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>> +					   struct resource *res)
> 
> Aligment, please use spaces.
> 
> Also, is __iomem needed here at all?

On Arm, we tend to add keep __iomem on pointer dealing with MMIO.

[...]

>> +
>> +#endif /* __ARM_SMMU_H__ */
>> +
>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
>> index f43485fe6e..f0a61521fb 100644
>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>> @@ -49,28 +49,7 @@
>>   #include <asm/io.h>
>>   #include <asm/platform.h>
>>   
>> -/* Alias to Xen device tree helpers */
>> -#define device_node dt_device_node
>> -#define of_phandle_args dt_phandle_args
>> -#define of_device_id dt_device_match
>> -#define of_match_node dt_match_node
>> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
>> -#define of_property_read_bool dt_property_read_bool
>> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
>> -
>> -/* Xen: Helpers to get device MMIO and IRQs */
>> -struct resource {
>> -	u64 addr;
>> -	u64 size;
>> -	unsigned int type;
>> -};
>> -
>> -#define resource_size(res) ((res)->size)
>> -
>> -#define platform_device device
>> -
>> -#define IORESOURCE_MEM 0
>> -#define IORESOURCE_IRQ 1
> 
> You introduce the above code in patch 5, and remove it in patch 6, is
> this really needed?
> 
> Ie: why not simply introduce this code directly in this patch?

See https://lists.xen.org/archives/html/xen-devel/2018-01/msg02066.html

> 
>> diff --git a/xen/drivers/passthrough/arm/smmu.c b/xen/drivers/passthrough/arm/smmu.c
>> index ad956d5b8d..4c04391e21 100644
>> --- a/xen/drivers/passthrough/arm/smmu.c
>> +++ b/xen/drivers/passthrough/arm/smmu.c
>> @@ -41,6 +41,7 @@
>>   #include <xen/irq.h>
>>   #include <xen/lib.h>
>>   #include <xen/list.h>
>> +#include <xen/linux_compat.h>
>>   #include <xen/mm.h>
>>   #include <xen/vmap.h>
>>   #include <xen/rbtree.h>
>> @@ -51,36 +52,13 @@
>>   #include <asm/io.h>
>>   #include <asm/platform.h>
>>   
>> +#include "arm_smmu.h" /* Not a self contained header. So last in the list */
>>   /* Xen: The below defines are redefined within the file. Undef it */
>>   #undef SCTLR_AFE
>>   #undef SCTLR_TRE
>>   #undef SCTLR_M
>>   #undef TTBCR_EAE
>>   
>> -/* Alias to Xen device tree helpers */
>> -#define device_node dt_device_node
>> -#define of_phandle_args dt_phandle_args
>> -#define of_device_id dt_device_match
>> -#define of_match_node dt_match_node
>> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
>> -#define of_property_read_bool dt_property_read_bool
>> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
>> -
>> -/* Xen: Helpers to get device MMIO and IRQs */
>> -struct resource
>> -{
>> -	u64 addr;
>> -	u64 size;
>> -	unsigned int type;
>> -};
>> -
>> -#define resource_size(res) (res)->size;
>> -
>> -#define platform_device device
>> -
>> -#define IORESOURCE_MEM 0
>> -#define IORESOURCE_IRQ 1
>> -
>>   static struct resource *platform_get_resource(struct platform_device *pdev,
>>   					      unsigned int type,
>>   					      unsigned int num)
>> @@ -118,58 +96,6 @@ static struct resource *platform_get_resource(struct platform_device *pdev,
>>   
>>   /* Xen: Helpers for IRQ functions */
>>   #define request_irq(irq, func, flags, name, dev) request_irq(irq, flags, func, name, dev)
>> -#define free_irq release_irq
>> -
>> -enum irqreturn {
>> -	IRQ_NONE	= (0 << 0),
>> -	IRQ_HANDLED	= (1 << 0),
>> -};
>> -
>> -typedef enum irqreturn irqreturn_t;
> 
> You remove the irqreturn enum without adding any replacement, is this
> really unused?

It is used, so looks like the SMMU driver has not been build test it. 
Sameer, please at least build test the changes you made in the SMMU driver.

Cheers,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Roger Pau Monné]

On Fri, Feb 09, 2018 at 10:51:01AM +0000, Julien Grall wrote:
> Hi,
> 
> On 02/09/2018 10:43 AM, Roger Pau Monné wrote:
> > > +    unsigned int type;
> > > +};
> > > +
> > > +#define resource_size(res) ((res)->size)
> > > +
> > > +#define platform_device device
> > > +
> > > +#define IORESOURCE_MEM 0
> > > +#define IORESOURCE_IRQ 1
> > > +
> > > +/* Stub out DMA domain related functions */
> > > +#define iommu_get_dma_cookie(dom) 0
> > > +#define iommu_put_dma_cookie(dom)
> > > +
> > > +#define VA_BITS		0 /* Only used for configuring stage-1 input size */
> > > +
> > > +#define MODULE_DEVICE_TABLE(type, name)
> > > +#define module_param_named(name, value, type, perm)
> > > +#define MODULE_PARM_DESC(_parm, desc)
> > > +
> > > +#define dma_set_mask_and_coherent(d, b)	0
> > > +#define of_dma_is_coherent(n)	0
> > > +
> > > +static void __iomem *devm_ioremap_resource(struct device *dev,
> > > +					   struct resource *res)
> > 
> > Aligment, please use spaces.
> > 
> > Also, is __iomem needed here at all?
> 
> On Arm, we tend to add keep __iomem on pointer dealing with MMIO.

I understand that you keep it when directly importing code from Linux,
but this is Xen code, so unless this is done merely for consistency it
seems quite pointless (__iomem is defined to nothing AFAICT).

> 
> [...]
> 
> > > +
> > > +#endif /* __ARM_SMMU_H__ */
> > > +
> > > diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
> > > index f43485fe6e..f0a61521fb 100644
> > > --- a/xen/drivers/passthrough/arm/smmu-v3.c
> > > +++ b/xen/drivers/passthrough/arm/smmu-v3.c
> > > @@ -49,28 +49,7 @@
> > >   #include <asm/io.h>
> > >   #include <asm/platform.h>
> > > -/* Alias to Xen device tree helpers */
> > > -#define device_node dt_device_node
> > > -#define of_phandle_args dt_phandle_args
> > > -#define of_device_id dt_device_match
> > > -#define of_match_node dt_match_node
> > > -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
> > > -#define of_property_read_bool dt_property_read_bool
> > > -#define of_parse_phandle_with_args dt_parse_phandle_with_args
> > > -
> > > -/* Xen: Helpers to get device MMIO and IRQs */
> > > -struct resource {
> > > -	u64 addr;
> > > -	u64 size;
> > > -	unsigned int type;
> > > -};
> > > -
> > > -#define resource_size(res) ((res)->size)
> > > -
> > > -#define platform_device device
> > > -
> > > -#define IORESOURCE_MEM 0
> > > -#define IORESOURCE_IRQ 1
> > 
> > You introduce the above code in patch 5, and remove it in patch 6, is
> > this really needed?
> > 
> > Ie: why not simply introduce this code directly in this patch?
> 
> See https://lists.xen.org/archives/html/xen-devel/2018-01/msg02066.html

Hm, OK, I'm not sure I follow that.

AFAICT the above code is added in patch 5 so that the driver can be
hooked up into the build system. Could we just hold off hooking the
driver to the build system until patch 6, in order to avoid such
addition and removal of code?

Thanks, Roger.

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Julien Grall]

Hi,

On 02/09/2018 11:02 AM, Roger Pau Monné wrote:
> On Fri, Feb 09, 2018 at 10:51:01AM +0000, Julien Grall wrote:
>> Hi,
>>
>> On 02/09/2018 10:43 AM, Roger Pau Monné wrote:
>>>> +    unsigned int type;
>>>> +};
>>>> +
>>>> +#define resource_size(res) ((res)->size)
>>>> +
>>>> +#define platform_device device
>>>> +
>>>> +#define IORESOURCE_MEM 0
>>>> +#define IORESOURCE_IRQ 1
>>>> +
>>>> +/* Stub out DMA domain related functions */
>>>> +#define iommu_get_dma_cookie(dom) 0
>>>> +#define iommu_put_dma_cookie(dom)
>>>> +
>>>> +#define VA_BITS		0 /* Only used for configuring stage-1 input size */
>>>> +
>>>> +#define MODULE_DEVICE_TABLE(type, name)
>>>> +#define module_param_named(name, value, type, perm)
>>>> +#define MODULE_PARM_DESC(_parm, desc)
>>>> +
>>>> +#define dma_set_mask_and_coherent(d, b)	0
>>>> +#define of_dma_is_coherent(n)	0
>>>> +
>>>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>>>> +					   struct resource *res)
>>>
>>> Aligment, please use spaces.
>>>
>>> Also, is __iomem needed here at all?
>>
>> On Arm, we tend to add keep __iomem on pointer dealing with MMIO.
> 
> I understand that you keep it when directly importing code from Linux,
> but this is Xen code, so unless this is done merely for consistency it
> seems quite pointless (__iomem is defined to nothing AFAICT).

We do it quite consistenly in Xen Arm code :). Have a look at the return 
of ioremap_* or read*/write* parameters.

While it might be defined to nothing today, I'd like to keep it because 
it could easily be defined to check the address space used.

> 
>>
>> [...]
>>
>>>> +
>>>> +#endif /* __ARM_SMMU_H__ */
>>>> +
>>>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
>>>> index f43485fe6e..f0a61521fb 100644
>>>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>>>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>>>> @@ -49,28 +49,7 @@
>>>>    #include <asm/io.h>
>>>>    #include <asm/platform.h>
>>>> -/* Alias to Xen device tree helpers */
>>>> -#define device_node dt_device_node
>>>> -#define of_phandle_args dt_phandle_args
>>>> -#define of_device_id dt_device_match
>>>> -#define of_match_node dt_match_node
>>>> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
>>>> -#define of_property_read_bool dt_property_read_bool
>>>> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
>>>> -
>>>> -/* Xen: Helpers to get device MMIO and IRQs */
>>>> -struct resource {
>>>> -	u64 addr;
>>>> -	u64 size;
>>>> -	unsigned int type;
>>>> -};
>>>> -
>>>> -#define resource_size(res) ((res)->size)
>>>> -
>>>> -#define platform_device device
>>>> -
>>>> -#define IORESOURCE_MEM 0
>>>> -#define IORESOURCE_IRQ 1
>>>
>>> You introduce the above code in patch 5, and remove it in patch 6, is
>>> this really needed?
>>>
>>> Ie: why not simply introduce this code directly in this patch?
>>
>> See https://lists.xen.org/archives/html/xen-devel/2018-01/msg02066.html
> 
> Hm, OK, I'm not sure I follow that.
> 
> AFAICT the above code is added in patch 5 so that the driver can be
> hooked up into the build system. Could we just hold off hooking the
> driver to the build system until patch 6, in order to avoid such
> addition and removal of code?

What matters is to know what is common between SMMUv2 and SMMUv3 driver. 
So it can be pulled in a separate headers.

IHMO, the both yours and his way are valid. TBH, I would have done a 
third way and move that patch before #5. But at this stage, this is a 
matter of taste, hence way I didn't push to reshuffle the series.

Cheers,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Sameer Goel]

On 2/9/2018 4:02 AM, Roger Pau Monné wrote:
> On Fri, Feb 09, 2018 at 10:51:01AM +0000, Julien Grall wrote:
>> Hi,
>>
>> On 02/09/2018 10:43 AM, Roger Pau Monné wrote:
>>>> +    unsigned int type;
>>>> +};
>>>> +
>>>> +#define resource_size(res) ((res)->size)
>>>> +
>>>> +#define platform_device device
>>>> +
>>>> +#define IORESOURCE_MEM 0
>>>> +#define IORESOURCE_IRQ 1
>>>> +
>>>> +/* Stub out DMA domain related functions */
>>>> +#define iommu_get_dma_cookie(dom) 0
>>>> +#define iommu_put_dma_cookie(dom)
>>>> +
>>>> +#define VA_BITS		0 /* Only used for configuring stage-1 input size */
>>>> +
>>>> +#define MODULE_DEVICE_TABLE(type, name)
>>>> +#define module_param_named(name, value, type, perm)
>>>> +#define MODULE_PARM_DESC(_parm, desc)
>>>> +
>>>> +#define dma_set_mask_and_coherent(d, b)	0
>>>> +#define of_dma_is_coherent(n)	0
>>>> +
>>>> +static void __iomem *devm_ioremap_resource(struct device *dev,
>>>> +					   struct resource *res)
>>> Aligment, please use spaces.
>>>
>>> Also, is __iomem needed here at all?
>> On Arm, we tend to add keep __iomem on pointer dealing with MMIO.
> I understand that you keep it when directly importing code from Linux,
> but this is Xen code, so unless this is done merely for consistency it
> seems quite pointless (__iomem is defined to nothing AFAICT).
>
>> [...]
>>
>>>> +
>>>> +#endif /* __ARM_SMMU_H__ */
>>>> +
>>>> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
>>>> index f43485fe6e..f0a61521fb 100644
>>>> --- a/xen/drivers/passthrough/arm/smmu-v3.c
>>>> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
>>>> @@ -49,28 +49,7 @@
>>>>   #include <asm/io.h>
>>>>   #include <asm/platform.h>
>>>> -/* Alias to Xen device tree helpers */
>>>> -#define device_node dt_device_node
>>>> -#define of_phandle_args dt_phandle_args
>>>> -#define of_device_id dt_device_match
>>>> -#define of_match_node dt_match_node
>>>> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
>>>> -#define of_property_read_bool dt_property_read_bool
>>>> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
>>>> -
>>>> -/* Xen: Helpers to get device MMIO and IRQs */
>>>> -struct resource {
>>>> -	u64 addr;
>>>> -	u64 size;
>>>> -	unsigned int type;
>>>> -};
>>>> -
>>>> -#define resource_size(res) ((res)->size)
>>>> -
>>>> -#define platform_device device
>>>> -
>>>> -#define IORESOURCE_MEM 0
>>>> -#define IORESOURCE_IRQ 1
>>> You introduce the above code in patch 5, and remove it in patch 6, is
>>> this really needed?
>>>
>>> Ie: why not simply introduce this code directly in this patch?
>> See https://lists.xen.org/archives/html/xen-devel/2018-01/msg02066.html
> Hm, OK, I'm not sure I follow that.
>
> AFAICT the above code is added in patch 5 so that the driver can be
> hooked up into the build system. Could we just hold off hooking the
> driver to the build system until patch 6, in order to avoid such
> addition and removal of code?
I just wanted this patch to be the unifying change between the SMMUv2 and SMMUv3 jargon. This allows me to keep some variable names as is from Linux kernel for the first checkin.

I agree that I can shuffle around some variables but since I was introducing this patch I refrained from it.

>
> Thanks, Roger.
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xenproject.org
> https://lists.xenproject.org/mailman/listinfo/xen-devel


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Sameer Goel]

On 2/9/2018 3:51 AM, Julien Grall wrote:
>
>>
>>> diff --git a/xen/drivers/passthrough/arm/smmu.c b/xen/drivers/passthrough/arm/smmu.c
>>> index ad956d5b8d..4c04391e21 100644
>>> --- a/xen/drivers/passthrough/arm/smmu.c
>>> +++ b/xen/drivers/passthrough/arm/smmu.c
>>> @@ -41,6 +41,7 @@
>>>   #include <xen/irq.h>
>>>   #include <xen/lib.h>
>>>   #include <xen/list.h>
>>> +#include <xen/linux_compat.h>
The above header included for the first time.
>>>   #include <xen/mm.h>
>>>   #include <xen/vmap.h>
>>>   #include <xen/rbtree.h>
>>> @@ -51,36 +52,13 @@
>>>   #include <asm/io.h>
>>>   #include <asm/platform.h>
>>>   +#include "arm_smmu.h" /* Not a self contained header. So last in the list */
>>>   /* Xen: The below defines are redefined within the file. Undef it */
>>>   #undef SCTLR_AFE
>>>   #undef SCTLR_TRE
>>>   #undef SCTLR_M
>>>   #undef TTBCR_EAE
>>>   -/* Alias to Xen device tree helpers */
>>> -#define device_node dt_device_node
>>> -#define of_phandle_args dt_phandle_args
>>> -#define of_device_id dt_device_match
>>> -#define of_match_node dt_match_node
>>> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
>>> -#define of_property_read_bool dt_property_read_bool
>>> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
>>> -
>>> -/* Xen: Helpers to get device MMIO and IRQs */
>>> -struct resource
>>> -{
>>> -    u64 addr;
>>> -    u64 size;
>>> -    unsigned int type;
>>> -};
>>> -
>>> -#define resource_size(res) (res)->size;
>>> -
>>> -#define platform_device device
>>> -
>>> -#define IORESOURCE_MEM 0
>>> -#define IORESOURCE_IRQ 1
>>> -
>>>   static struct resource *platform_get_resource(struct platform_device *pdev,
>>>                             unsigned int type,
>>>                             unsigned int num)
>>> @@ -118,58 +96,6 @@ static struct resource *platform_get_resource(struct platform_device *pdev,
>>>     /* Xen: Helpers for IRQ functions */
>>>   #define request_irq(irq, func, flags, name, dev) request_irq(irq, flags, func, name, dev)
>>> -#define free_irq release_irq
>>> -
>>> -enum irqreturn {
>>> -    IRQ_NONE    = (0 << 0),
>>> -    IRQ_HANDLED    = (1 << 0),
>>> -};
>>> -
>>> -typedef enum irqreturn irqreturn_t;
>>
>> You remove the irqreturn enum without adding any replacement, is this
>> really unused?
>
> It is used, so looks like the SMMU driver has not been build test it. Sameer, please at least build test the changes you made in the SMMU driver.

It is build tested. The above defined now come from linux_compat.h. I introduced this with the smmu-v3 code changes as recommended by Roger on the RFC.
>
> Cheers,
>
Thanks,
Sameer

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 6/7] drivers/passthrough/arm: Refactor code for arm smmu drivers

[Julien Grall]

Hi,

On 09/02/18 03:10, Sameer Goel wrote:
> Pull common defines for SMMU drives in a local header.

s/drivers/

> 
> Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
> ---
>   xen/drivers/passthrough/arm/arm_smmu.h | 125 +++++++++++++++++++++++++++++++++
>   xen/drivers/passthrough/arm/smmu-v3.c  |  96 +------------------------
>   xen/drivers/passthrough/arm/smmu.c     | 104 +--------------------------
>   3 files changed, 128 insertions(+), 197 deletions(-)
>   create mode 100644 xen/drivers/passthrough/arm/arm_smmu.h
> 
> diff --git a/xen/drivers/passthrough/arm/arm_smmu.h b/xen/drivers/passthrough/arm/arm_smmu.h
> new file mode 100644
> index 0000000000..f49dceb5b4
> --- /dev/null
> +++ b/xen/drivers/passthrough/arm/arm_smmu.h
> @@ -0,0 +1,125 @@
> +/******************************************************************************
> + * ./arm_smmu.h

xen/drivers/passthrough/arm/arm_smmu.h

> + *
> + * Common compatibility defines and data_structures for porting arm smmu
> + * drivers from Linux.
> + *
> + * Copyright (c) 2017 Linaro Limited
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ARM_SMMU_H__
> +#define __ARM_SMMU_H__
> +
> +

No need for 2 newline

> +/* Alias to Xen device tree helpers */
> +#define device_node dt_device_node
> +#define of_phandle_args dt_phandle_args
> +#define of_device_id dt_device_match
> +#define of_match_node dt_match_node
> +#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
> +#define of_property_read_bool dt_property_read_bool
> +#define of_parse_phandle_with_args dt_parse_phandle_with_args
> +
> +/* Helpers to get device MMIO and IRQs */
> +struct resource {
> +    u64 addr;
> +    u64 size;

Please take the oppoturnity to switch to uint64_t.

> +    unsigned int type;
> +};
> +
> +#define resource_size(res) ((res)->size)
> +
> +#define platform_device device
> +
> +#define IORESOURCE_MEM 0
> +#define IORESOURCE_IRQ 1
> +
> +/* Stub out DMA domain related functions */
> +#define iommu_get_dma_cookie(dom) 0
> +#define iommu_put_dma_cookie(dom)

Please avoid to implement empty macro. Use do { } while (0)

> +
> +#define VA_BITS		0 /* Only used for configuring stage-1 input size */

This seems to only be dropped in the SMMUv2 driver.

> +
> +#define MODULE_DEVICE_TABLE(type, name)
> +#define module_param_named(name, value, type, perm)
> +#define MODULE_PARM_DESC(_parm, desc)

Should not this belong to the linux-compat.h?

> +
> +#define dma_set_mask_and_coherent(d, b)	0
> +#define of_dma_is_coherent(n)	0

Those 2 don't exist in the SMMUv2 driver.

> +
> +static void __iomem *devm_ioremap_resource(struct device *dev,
> +					   struct resource *res)
> +{
> +    void __iomem *ptr;
> +
> +    if ( !res || res->type != IORESOURCE_MEM )
> +    {
> +        dev_err(dev, "Invalid resource\n");
> +        return ERR_PTR(-EINVAL);
> +    }
> +
> +    ptr = ioremap_nocache(res->addr, res->size);
> +    if ( !ptr )
> +    {
> +        dev_err(dev, "ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
> +                res->addr, res->size);
> +        return ERR_PTR(-ENOMEM);
> +    }
> +
> +    return ptr;
> +}
> +
> +/*
> + * Domain type definitions. Not really needed for Xen, defining to port
> + * Linux code as-is
> + */
> +#define IOMMU_DOMAIN_UNMANAGED 0
> +#define IOMMU_DOMAIN_DMA 1
> +#define IOMMU_DOMAIN_IDENTITY 2
> +
> +/* Xen: Compatibility define for iommu_domain_geometry.*/
> +struct iommu_domain_geometry {
> +    dma_addr_t aperture_start; /* First address that can be mapped    */
> +    dma_addr_t aperture_end;   /* Last address that can be mapped     */
> +    bool force_aperture;       /* DMA only allowed in mappable range? */
> +};
> +
> +/* Xen: Dummy iommu_domain */
> +struct iommu_domain { > +    /* Runtime SMMU configuration for this iommu_domain */
> +    struct arm_smmu_domain		*priv;
> +    unsigned int			type;
> +
> +    /* Dummy compatibility defines */
> +    unsigned long pgsize_bitmap;
> +    struct iommu_domain_geometry geometry;
> +
> +    atomic_t ref;
> +    /* Used to link iommu_domain contexts for a same domain.
> +     * There is at least one per-SMMU to used by the domain.
> +     */
> +    struct list_head		list;
> +};
> +
> +/* Xen: Describes information required for a Xen domain */
> +struct arm_smmu_xen_domain {
> +    spinlock_t			lock;
> +    /* List of iommu domains associated to this domain */
> +    struct list_head		contexts;
> +};
> +
> +#endif /* __ARM_SMMU_H__ */
> +
> diff --git a/xen/drivers/passthrough/arm/smmu-v3.c b/xen/drivers/passthrough/arm/smmu-v3.c
> index f43485fe6e..f0a61521fb 100644
> --- a/xen/drivers/passthrough/arm/smmu-v3.c
> +++ b/xen/drivers/passthrough/arm/smmu-v3.c
> @@ -49,28 +49,7 @@
>   #include <asm/io.h>
>   #include <asm/platform.h>
>   
> -/* Alias to Xen device tree helpers */
> -#define device_node dt_device_node
> -#define of_phandle_args dt_phandle_args
> -#define of_device_id dt_device_match
> -#define of_match_node dt_match_node
> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
> -#define of_property_read_bool dt_property_read_bool
> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
> -
> -/* Xen: Helpers to get device MMIO and IRQs */
> -struct resource {
> -	u64 addr;
> -	u64 size;
> -	unsigned int type;
> -};
> -
> -#define resource_size(res) ((res)->size)
> -
> -#define platform_device device
> -
> -#define IORESOURCE_MEM 0
> -#define IORESOURCE_IRQ 1
> +#include "arm_smmu.h"
>   
>   static struct resource *platform_get_resource(struct platform_device *pdev,
>   					      unsigned int type,
> @@ -200,79 +179,6 @@ static void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
>   	xfree(vaddr);
>   }
>   
> -/* Xen: Stub out DMA domain related functions */
> -#define iommu_get_dma_cookie(dom) 0
> -#define iommu_put_dma_cookie(dom)
> -
> -/* Xen: Stub out module param related function */
> -#define module_param_named(a, b, c, d)
> -#define MODULE_PARM_DESC(a, b)
> -
> -#define dma_set_mask_and_coherent(d, b) 0
> -
> -#define of_dma_is_coherent(n) 0
> -
> -#define MODULE_DEVICE_TABLE(type, name)
> -
> -static void __iomem *devm_ioremap_resource(struct device *dev,
> -					   struct resource *res)
> -{
> -	void __iomem *ptr;
> -
> -	if (!res || res->type != IORESOURCE_MEM) {
> -		dev_err(dev, "Invalid resource\n");
> -		return ERR_PTR(-EINVAL);
> -	}
> -
> -	ptr = ioremap_nocache(res->addr, res->size);
> -	if (!ptr) {
> -		dev_err(dev,
> -			"ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
> -			res->addr, res->size);
> -		return ERR_PTR(-ENOMEM);
> -	}
> -
> -	return ptr;
> -}
> -
> -/* Xen: Compatibility define for iommu_domain_geometry.*/
> -struct iommu_domain_geometry {
> -	dma_addr_t aperture_start; /* First address that can be mapped    */
> -	dma_addr_t aperture_end;   /* Last address that can be mapped     */
> -	bool force_aperture;       /* DMA only allowed in mappable range? */
> -};
> -
> -
> -/* Xen: Type definitions for iommu_domain */
> -#define IOMMU_DOMAIN_UNMANAGED 0
> -#define IOMMU_DOMAIN_DMA 1
> -#define IOMMU_DOMAIN_IDENTITY 2
> -
> -/* Xen: Dummy iommu_domain */
> -struct iommu_domain {
> -	/* Runtime SMMU configuration for this iommu_domain */
> -	struct arm_smmu_domain		*priv;
> -	unsigned int type;
> -
> -	/* Dummy compatibility defines */
> -	unsigned long pgsize_bitmap;
> -	struct iommu_domain_geometry geometry;
> -
> -	atomic_t ref;
> -	/*
> -	 * Used to link iommu_domain contexts for a same domain.
> -	 * There is at least one per-SMMU to used by the domain.
> -	 */
> -	struct list_head		list;
> -};
> -
> -/* Xen: Describes information required for a Xen domain */
> -struct arm_smmu_xen_domain {
> -	spinlock_t			lock;
> -	/* List of iommu domains associated to this domain */
> -	struct list_head		contexts;
> -};
> -
>   /*
>    * Xen: Information about each device stored in dev->archdata.iommu
>    *
> diff --git a/xen/drivers/passthrough/arm/smmu.c b/xen/drivers/passthrough/arm/smmu.c
> index ad956d5b8d..4c04391e21 100644
> --- a/xen/drivers/passthrough/arm/smmu.c
> +++ b/xen/drivers/passthrough/arm/smmu.c
> @@ -41,6 +41,7 @@
>   #include <xen/irq.h>
>   #include <xen/lib.h>
>   #include <xen/list.h>
> +#include <xen/linux_compat.h>

I don't think this refactoring belongs to this patch.

>   #include <xen/mm.h>
>   #include <xen/vmap.h>
>   #include <xen/rbtree.h>
> @@ -51,36 +52,13 @@
>   #include <asm/io.h>
>   #include <asm/platform.h>
>   
> +#include "arm_smmu.h" /* Not a self contained header. So last in the list */
>   /* Xen: The below defines are redefined within the file. Undef it */
>   #undef SCTLR_AFE
>   #undef SCTLR_TRE
>   #undef SCTLR_M
>   #undef TTBCR_EAE
>   
> -/* Alias to Xen device tree helpers */
> -#define device_node dt_device_node
> -#define of_phandle_args dt_phandle_args
> -#define of_device_id dt_device_match
> -#define of_match_node dt_match_node
> -#define of_property_read_u32(np, pname, out) (!dt_property_read_u32(np, pname, out))
> -#define of_property_read_bool dt_property_read_bool
> -#define of_parse_phandle_with_args dt_parse_phandle_with_args
> -
> -/* Xen: Helpers to get device MMIO and IRQs */
> -struct resource
> -{
> -	u64 addr;
> -	u64 size;
> -	unsigned int type;
> -};
> -
> -#define resource_size(res) (res)->size;
> -
> -#define platform_device device
> -
> -#define IORESOURCE_MEM 0
> -#define IORESOURCE_IRQ 1
> -
>   static struct resource *platform_get_resource(struct platform_device *pdev,
>   					      unsigned int type,
>   					      unsigned int num)
> @@ -118,58 +96,6 @@ static struct resource *platform_get_resource(struct platform_device *pdev,
>   
>   /* Xen: Helpers for IRQ functions */
>   #define request_irq(irq, func, flags, name, dev) request_irq(irq, flags, func, name, dev)
> -#define free_irq release_irq
> -
> -enum irqreturn {
> -	IRQ_NONE	= (0 << 0),
> -	IRQ_HANDLED	= (1 << 0),
> -};
> -
> -typedef enum irqreturn irqreturn_t;
> -
> -/* Device logger functions
> - * TODO: Handle PCI
> - */
> -#define dev_print(dev, lvl, fmt, ...)						\
> -	 printk(lvl "smmu: %s: " fmt, dt_node_full_name(dev_to_dt(dev)), ## __VA_ARGS__)
> -
> -#define dev_dbg(dev, fmt, ...) dev_print(dev, XENLOG_DEBUG, fmt, ## __VA_ARGS__)
> -#define dev_notice(dev, fmt, ...) dev_print(dev, XENLOG_INFO, fmt, ## __VA_ARGS__)
> -#define dev_warn(dev, fmt, ...) dev_print(dev, XENLOG_WARNING, fmt, ## __VA_ARGS__)
> -#define dev_err(dev, fmt, ...) dev_print(dev, XENLOG_ERR, fmt, ## __VA_ARGS__)
> -
> -#define dev_err_ratelimited(dev, fmt, ...)					\
> -	 dev_print(dev, XENLOG_ERR, fmt, ## __VA_ARGS__)
> -
> -#define dev_name(dev) dt_node_full_name(dev_to_dt(dev))
> -
> -/* Alias to Xen allocation helpers */
> -#define kfree xfree
> -#define kmalloc(size, flags)		_xmalloc(size, sizeof(void *))
> -#define kzalloc(size, flags)		_xzalloc(size, sizeof(void *))
> -#define devm_kzalloc(dev, size, flags)	_xzalloc(size, sizeof(void *))
> -#define kmalloc_array(size, n, flags)	_xmalloc_array(size, sizeof(void *), n)
> -
> -static void __iomem *devm_ioremap_resource(struct device *dev,
> -					   struct resource *res)
> -{
> -	void __iomem *ptr;
> -
> -	if (!res || res->type != IORESOURCE_MEM) {
> -		dev_err(dev, "Invalid resource\n");
> -		return ERR_PTR(-EINVAL);
> -	}
> -
> -	ptr = ioremap_nocache(res->addr, res->size);
> -	if (!ptr) {
> -		dev_err(dev,
> -			"ioremap failed (addr 0x%"PRIx64" size 0x%"PRIx64")\n",
> -			res->addr, res->size);
> -		return ERR_PTR(-ENOMEM);
> -	}
> -
> -	return ptr;
> -}
>   
>   /* Xen doesn't handle IOMMU fault */
>   #define report_iommu_fault(...)	1
> @@ -196,32 +122,6 @@ static inline int pci_for_each_dma_alias(struct pci_dev *pdev,
>   #define PHYS_MASK_SHIFT		PADDR_BITS
>   typedef paddr_t phys_addr_t;
>   
> -#define VA_BITS		0	/* Only used for configuring stage-1 input size */
> -
> -#define MODULE_DEVICE_TABLE(type, name)
> -#define module_param_named(name, value, type, perm)
> -#define MODULE_PARM_DESC(_parm, desc)
> -
> -/* Xen: Dummy iommu_domain */
> -struct iommu_domain
> -{
> -	/* Runtime SMMU configuration for this iommu_domain */
> -	struct arm_smmu_domain		*priv;
> -
> -	atomic_t ref;
> -	/* Used to link iommu_domain contexts for a same domain.
> -	 * There is at least one per-SMMU to used by the domain.
> -	 * */
> -	struct list_head		list;
> -};
> -
> -/* Xen: Describes informations required for a Xen domain */
> -struct arm_smmu_xen_domain {
> -	spinlock_t			lock;
> -	/* List of context (i.e iommu_domain) associated to this domain */
> -	struct list_head		contexts;
> -};
> -
>   /*
>    * Xen: Information about each device stored in dev->archdata.iommu
>    *
> 

Cheers,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

[PATCH 7/7] xen/smmu: Add a new config define for legacy SMMU

[Sameer Goel]

Add a new config item to control compilation for legacy arm SMMU.

Signed-off-by: Sameer Goel <sameer.goel@linaro.org>
---
 xen/drivers/passthrough/arm/Kconfig  | 6 ++++++
 xen/drivers/passthrough/arm/Makefile | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/xen/drivers/passthrough/arm/Kconfig b/xen/drivers/passthrough/arm/Kconfig
index cda899f608..e888a78312 100644
--- a/xen/drivers/passthrough/arm/Kconfig
+++ b/xen/drivers/passthrough/arm/Kconfig
@@ -6,3 +6,9 @@ config ARM_SMMU_v3
 	 Support for implementations of the ARM System MMU architecture
 	 version 3.
 
+config ARM_SMMU
+	bool "ARM Legacy SMMU Support"
+	depends on ARM
+	help
+	 Support for implementations of the ARM System MMU architecture
+	 version 1 and 2.
diff --git a/xen/drivers/passthrough/arm/Makefile b/xen/drivers/passthrough/arm/Makefile
index e14732b55c..5b3eb1545e 100644
--- a/xen/drivers/passthrough/arm/Makefile
+++ b/xen/drivers/passthrough/arm/Makefile
@@ -1,3 +1,3 @@
 obj-y += iommu.o
-obj-y += smmu.o
+obj-$(CONFIG_ARM_SMMU) += smmu.o
 obj-$(CONFIG_ARM_SMMU_v3) += smmu-v3.o
-- 
2.14.1


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 0/7] SMMUv3 driver

[Julien Grall]

Hi,

On 09/02/18 03:10, Sameer Goel wrote:
> This patch set adds support for the SMMUv3 driver. This is a continuation on
> a RFCv4.[1]
> The IORT support came from [2]. This RFC has some conflicting defines that
> have to be addressed by introducing the linux_compat.h header in IORT patch
> set. In any case the SMMU changes apply on top of IORT patches.

The SMMUv3 series looks in good state and I would like to see this 
merged for Xen 4.11. Manish, do we have an update on the IORT side?

Cheers,

> 
> List of changes:
> - Addition of a linux_compat header.
> - Addition of a common header for arm smmu defines.
> - Rebase of the SMMUv3 driver to the driver in linux kernel 4.14 rc7.
> - New config defines for ARM SMMU drivers.
> 
> [1] https://lists.xenproject.org/archives/html/xen-devel/2017-12/msg01294.html
> [2] https://lists.xenproject.org/archives/html/xen-devel/2018-01/msg00007.html
> Sameer Goel (7):
>    Port WARN_ON_ONCE() from Linux
>    xen/bitops: Rename LOG_2 to ilog2
>    passthrough/arm: Modify SMMU driver to use generic device definition
>    Add verbatim copy of arm-smmu-v3.c from Linux
>    xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver
>    drivers/passthrough/arm: Refactor code for arm smmu drivers
>    xen/smmu: Add a new config define for legacy SMMU
> 
>   xen/arch/arm/p2m.c                     |    1 +
>   xen/arch/arm/xen.lds.S                 |    1 +
>   xen/arch/x86/x86_64/asm-offsets.c      |    2 +-
>   xen/arch/x86/xen.lds.S                 |    1 +
>   xen/drivers/Kconfig                    |    2 +
>   xen/drivers/passthrough/arm/Kconfig    |   14 +
>   xen/drivers/passthrough/arm/Makefile   |    3 +-
>   xen/drivers/passthrough/arm/arm_smmu.h |  125 ++
>   xen/drivers/passthrough/arm/smmu-v3.c  | 3625 ++++++++++++++++++++++++++++++++
>   xen/drivers/passthrough/arm/smmu.c     |  114 +-
>   xen/include/xen/bitops.h               |    2 +-
>   xen/include/xen/lib.h                  |   13 +
>   xen/include/xen/linux_compat.h         |   84 +
>   13 files changed, 3877 insertions(+), 110 deletions(-)
>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>   create mode 100644 xen/drivers/passthrough/arm/arm_smmu.h
>   create mode 100644 xen/drivers/passthrough/arm/smmu-v3.c
>   create mode 100644 xen/include/xen/linux_compat.h
> 

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

Re: [PATCH 0/7] SMMUv3 driver

[Manish Jaggi]

On 03/01/2018 08:05 PM, Julien Grall wrote:
> Hi,
>
> On 09/02/18 03:10, Sameer Goel wrote:
>> This patch set adds support for the SMMUv3 driver. This is a 
>> continuation on
>> a RFCv4.[1]
>> The IORT support came from [2]. This RFC has some conflicting defines 
>> that
>> have to be addressed by introducing the linux_compat.h header in IORT 
>> patch
>> set. In any case the SMMU changes apply on top of IORT patches.
>
> The SMMUv3 series looks in good state and I would like to see this 
> merged for Xen 4.11. Manish, do we have an update on the IORT side?
Started merging this series with my code.
>
> Cheers,
>
>>
>> List of changes:
>> - Addition of a linux_compat header.
>> - Addition of a common header for arm smmu defines.
>> - Rebase of the SMMUv3 driver to the driver in linux kernel 4.14 rc7.
>> - New config defines for ARM SMMU drivers.
>>
>> [1] 
>> https://lists.xenproject.org/archives/html/xen-devel/2017-12/msg01294.html
>> [2] 
>> https://lists.xenproject.org/archives/html/xen-devel/2018-01/msg00007.html
>> Sameer Goel (7):
>>    Port WARN_ON_ONCE() from Linux
>>    xen/bitops: Rename LOG_2 to ilog2
>>    passthrough/arm: Modify SMMU driver to use generic device definition
>>    Add verbatim copy of arm-smmu-v3.c from Linux
>>    xen/iommu: smmu-v3: Add Xen specific code to enable the ported driver
>>    drivers/passthrough/arm: Refactor code for arm smmu drivers
>>    xen/smmu: Add a new config define for legacy SMMU
>>
>>   xen/arch/arm/p2m.c                     |    1 +
>>   xen/arch/arm/xen.lds.S                 |    1 +
>>   xen/arch/x86/x86_64/asm-offsets.c      |    2 +-
>>   xen/arch/x86/xen.lds.S                 |    1 +
>>   xen/drivers/Kconfig                    |    2 +
>>   xen/drivers/passthrough/arm/Kconfig    |   14 +
>>   xen/drivers/passthrough/arm/Makefile   |    3 +-
>>   xen/drivers/passthrough/arm/arm_smmu.h |  125 ++
>>   xen/drivers/passthrough/arm/smmu-v3.c  | 3625 
>> ++++++++++++++++++++++++++++++++
>>   xen/drivers/passthrough/arm/smmu.c     |  114 +-
>>   xen/include/xen/bitops.h               |    2 +-
>>   xen/include/xen/lib.h                  |   13 +
>>   xen/include/xen/linux_compat.h         |   84 +
>>   13 files changed, 3877 insertions(+), 110 deletions(-)
>>   create mode 100644 xen/drivers/passthrough/arm/Kconfig
>>   create mode 100644 xen/drivers/passthrough/arm/arm_smmu.h
>>   create mode 100644 xen/drivers/passthrough/arm/smmu-v3.c
>>   create mode 100644 xen/include/xen/linux_compat.h
>>
>


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel