All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philipp Rudo <prudo@linux.vnet.ibm.com>
To: kexec@lists.infradead.org, linux-s390@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Eric Biederman <ebiederm@xmission.com>,
	Vivek Goyal <vgoyal@redhat.com>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>,
	Martin Schwidefsky <schwidefsky@de.ibm.com>,
	Heiko Carstens <heiko.carstens@de.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	x86@kernel.org
Subject: [PATCH 07/17] kexec_file: Simplify kexec_purgatory_setup_sechdrs 1
Date: Mon, 12 Feb 2018 11:07:44 +0100	[thread overview]
Message-ID: <20180212100754.55121-8-prudo@linux.vnet.ibm.com> (raw)
In-Reply-To: <20180212100754.55121-1-prudo@linux.vnet.ibm.com>

To update the entry point there is an extra loop over all section headers
although this can be done in the main loop. So move it there and eliminate
the extra loop and variable to store the 'entry section index'.

Also, in the main loop, move the usual case, i.e. non-bss section, out of
the extra if-block.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 kernel/kexec_file.c | 76 +++++++++++++++++++++--------------------------------
 1 file changed, 30 insertions(+), 46 deletions(-)

diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index d1c3ec8dc6b1..bb31a3b627c2 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -731,7 +731,6 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 	unsigned char *buf_addr;
 	unsigned char *src;
 	Elf_Shdr *sechdrs;
-	int entry_sidx = -1;
 	int i;
 
 	sechdrs = vzalloc(pi->ehdr->e_shnum * sizeof(Elf_Shdr));
@@ -763,32 +762,11 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 						sechdrs[i].sh_offset;
 	}
 
-	/*
-	 * Identify entry point section and make entry relative to section
-	 * start.
-	 */
-	kbuf->image->start = pi->ehdr->e_entry;
-	for (i = 0; i < pi->ehdr->e_shnum; i++) {
-		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
-			continue;
-
-		if (!(sechdrs[i].sh_flags & SHF_EXECINSTR))
-			continue;
-
-		/* Make entry section relative */
-		if (sechdrs[i].sh_addr <= pi->ehdr->e_entry &&
-		    ((sechdrs[i].sh_addr + sechdrs[i].sh_size) >
-		     pi->ehdr->e_entry)) {
-			entry_sidx = i;
-			kbuf->image->start -= sechdrs[i].sh_addr;
-			break;
-		}
-	}
-
 	/* Load SHF_ALLOC sections */
 	buf_addr = kbuf->buffer;
 	load_addr = curr_load_addr = kbuf->mem;
 	bss_addr = load_addr + kbuf->bufsz;
+	kbuf->image->start = pi->ehdr->e_entry;
 
 	for (i = 0; i < pi->ehdr->e_shnum; i++) {
 		unsigned long align;
@@ -797,34 +775,40 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 			continue;
 
 		align = sechdrs[i].sh_addralign;
-		if (sechdrs[i].sh_type != SHT_NOBITS) {
-			curr_load_addr = ALIGN(curr_load_addr, align);
-			offset = curr_load_addr - load_addr;
-			/* We already modifed ->sh_offset to keep src addr */
-			src = (char *) sechdrs[i].sh_offset;
-			memcpy(buf_addr + offset, src, sechdrs[i].sh_size);
-
-			/* Store load address and source address of section */
-			sechdrs[i].sh_addr = curr_load_addr;
-
-			/*
-			 * This section got copied to temporary buffer. Update
-			 * ->sh_offset accordingly.
-			 */
-			sechdrs[i].sh_offset = (unsigned long)(buf_addr + offset);
-
-			/* Advance to the next address */
-			curr_load_addr += sechdrs[i].sh_size;
-		} else {
+
+		if (sechdrs[i].sh_type == SHT_NOBITS) {
 			bss_addr = ALIGN(bss_addr, align);
 			sechdrs[i].sh_addr = bss_addr;
 			bss_addr += sechdrs[i].sh_size;
+			continue;
+		}
+
+		curr_load_addr = ALIGN(curr_load_addr, align);
+		offset = curr_load_addr - load_addr;
+		/* We already modifed ->sh_offset to keep src addr */
+		src = (char *)sechdrs[i].sh_offset;
+		memcpy(buf_addr + offset, src, sechdrs[i].sh_size);
+
+		if (sechdrs[i].sh_flags & SHF_EXECINSTR &&
+		    pi->ehdr->e_entry >= sechdrs[i].sh_addr &&
+		    pi->ehdr->e_entry < (sechdrs[i].sh_addr
+					 + sechdrs[i].sh_size)) {
+			kbuf->image->start -= sechdrs[i].sh_addr;
+			kbuf->image->start += curr_load_addr
 		}
-	}
 
-	/* Update entry point based on load address of text section */
-	if (entry_sidx >= 0)
-		kbuf->image->start += sechdrs[entry_sidx].sh_addr;
+		/* Store load address and source address of section */
+		sechdrs[i].sh_addr = curr_load_addr;
+
+		/*
+		 * This section got copied to temporary buffer. Update
+		 * ->sh_offset accordingly.
+		 */
+		sechdrs[i].sh_offset = (unsigned long)(buf_addr + offset);
+
+		/* Advance to the next address */
+		curr_load_addr += sechdrs[i].sh_size;
+	}
 
 	return 0;
 }
-- 
2.13.5

WARNING: multiple messages have this Message-ID (diff)
From: Philipp Rudo <prudo@linux.vnet.ibm.com>
To: kexec@lists.infradead.org, linux-s390@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>,
	x86@kernel.org, Heiko Carstens <heiko.carstens@de.ibm.com>,
	linux-kernel@vger.kernel.org,
	Martin Schwidefsky <schwidefsky@de.ibm.com>,
	Eric Biederman <ebiederm@xmission.com>,
	Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Vivek Goyal <vgoyal@redhat.com>
Subject: [PATCH 07/17] kexec_file: Simplify kexec_purgatory_setup_sechdrs 1
Date: Mon, 12 Feb 2018 11:07:44 +0100	[thread overview]
Message-ID: <20180212100754.55121-8-prudo@linux.vnet.ibm.com> (raw)
In-Reply-To: <20180212100754.55121-1-prudo@linux.vnet.ibm.com>

To update the entry point there is an extra loop over all section headers
although this can be done in the main loop. So move it there and eliminate
the extra loop and variable to store the 'entry section index'.

Also, in the main loop, move the usual case, i.e. non-bss section, out of
the extra if-block.

Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 kernel/kexec_file.c | 76 +++++++++++++++++++++--------------------------------
 1 file changed, 30 insertions(+), 46 deletions(-)

diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index d1c3ec8dc6b1..bb31a3b627c2 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -731,7 +731,6 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 	unsigned char *buf_addr;
 	unsigned char *src;
 	Elf_Shdr *sechdrs;
-	int entry_sidx = -1;
 	int i;
 
 	sechdrs = vzalloc(pi->ehdr->e_shnum * sizeof(Elf_Shdr));
@@ -763,32 +762,11 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 						sechdrs[i].sh_offset;
 	}
 
-	/*
-	 * Identify entry point section and make entry relative to section
-	 * start.
-	 */
-	kbuf->image->start = pi->ehdr->e_entry;
-	for (i = 0; i < pi->ehdr->e_shnum; i++) {
-		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
-			continue;
-
-		if (!(sechdrs[i].sh_flags & SHF_EXECINSTR))
-			continue;
-
-		/* Make entry section relative */
-		if (sechdrs[i].sh_addr <= pi->ehdr->e_entry &&
-		    ((sechdrs[i].sh_addr + sechdrs[i].sh_size) >
-		     pi->ehdr->e_entry)) {
-			entry_sidx = i;
-			kbuf->image->start -= sechdrs[i].sh_addr;
-			break;
-		}
-	}
-
 	/* Load SHF_ALLOC sections */
 	buf_addr = kbuf->buffer;
 	load_addr = curr_load_addr = kbuf->mem;
 	bss_addr = load_addr + kbuf->bufsz;
+	kbuf->image->start = pi->ehdr->e_entry;
 
 	for (i = 0; i < pi->ehdr->e_shnum; i++) {
 		unsigned long align;
@@ -797,34 +775,40 @@ static int kexec_purgatory_setup_sechdrs(struct purgatory_info *pi,
 			continue;
 
 		align = sechdrs[i].sh_addralign;
-		if (sechdrs[i].sh_type != SHT_NOBITS) {
-			curr_load_addr = ALIGN(curr_load_addr, align);
-			offset = curr_load_addr - load_addr;
-			/* We already modifed ->sh_offset to keep src addr */
-			src = (char *) sechdrs[i].sh_offset;
-			memcpy(buf_addr + offset, src, sechdrs[i].sh_size);
-
-			/* Store load address and source address of section */
-			sechdrs[i].sh_addr = curr_load_addr;
-
-			/*
-			 * This section got copied to temporary buffer. Update
-			 * ->sh_offset accordingly.
-			 */
-			sechdrs[i].sh_offset = (unsigned long)(buf_addr + offset);
-
-			/* Advance to the next address */
-			curr_load_addr += sechdrs[i].sh_size;
-		} else {
+
+		if (sechdrs[i].sh_type == SHT_NOBITS) {
 			bss_addr = ALIGN(bss_addr, align);
 			sechdrs[i].sh_addr = bss_addr;
 			bss_addr += sechdrs[i].sh_size;
+			continue;
+		}
+
+		curr_load_addr = ALIGN(curr_load_addr, align);
+		offset = curr_load_addr - load_addr;
+		/* We already modifed ->sh_offset to keep src addr */
+		src = (char *)sechdrs[i].sh_offset;
+		memcpy(buf_addr + offset, src, sechdrs[i].sh_size);
+
+		if (sechdrs[i].sh_flags & SHF_EXECINSTR &&
+		    pi->ehdr->e_entry >= sechdrs[i].sh_addr &&
+		    pi->ehdr->e_entry < (sechdrs[i].sh_addr
+					 + sechdrs[i].sh_size)) {
+			kbuf->image->start -= sechdrs[i].sh_addr;
+			kbuf->image->start += curr_load_addr
 		}
-	}
 
-	/* Update entry point based on load address of text section */
-	if (entry_sidx >= 0)
-		kbuf->image->start += sechdrs[entry_sidx].sh_addr;
+		/* Store load address and source address of section */
+		sechdrs[i].sh_addr = curr_load_addr;
+
+		/*
+		 * This section got copied to temporary buffer. Update
+		 * ->sh_offset accordingly.
+		 */
+		sechdrs[i].sh_offset = (unsigned long)(buf_addr + offset);
+
+		/* Advance to the next address */
+		curr_load_addr += sechdrs[i].sh_size;
+	}
 
 	return 0;
 }
-- 
2.13.5


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

  parent reply	other threads:[~2018-02-12 10:13 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-12 10:07 [PATCH 00/17] Add kexec_file_load support to s390 Philipp Rudo
2018-02-12 10:07 ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 01/17] kexec_file: Silence compile warnings Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 02/17] kexec_file: Remove checks in kexec_purgatory_load Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 03/17] kexec_file: Make purgatory_info->ehdr const Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 04/17] kexec_file: Search symbols in read-only kexec_purgatory Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 05/17] kexec_file: Use read-only sections in arch_kexec_apply_relocations* Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 06/17] kexec_file: Split up __kexec_load_puragory Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` Philipp Rudo [this message]
2018-02-12 10:07   ` [PATCH 07/17] kexec_file: Simplify kexec_purgatory_setup_sechdrs 1 Philipp Rudo
2018-02-12 10:07 ` [PATCH 08/17] kexec_file: Simplify kexec_purgatory_setup_sechdrs 2 Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 09/17] kexec_file: Remove mis-use of sh_offset field Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 10/17] kexec_file: Allow archs to set purgatory load address Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 11/17] kexec_file: Move purgatories sha256 to common code Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 12/17] s390/kexec_file: Prepare setup.h for kexec_file_load Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 13/17] s390/kexec_file: Add purgatory Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 14/17] s390/kexec_file: Add kexec_file_load system call Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:56   ` Philippe Ombredanne
2018-02-12 10:56     ` Philippe Ombredanne
2018-02-12 11:29     ` Philipp Rudo
2018-02-12 11:29       ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 15/17] s390/kexec_file: Add image loader Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 16/17] s390/kexec_file: Add crash support to " Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-12 10:07 ` [PATCH 17/17] s390/kexec_file: Add ELF loader Philipp Rudo
2018-02-12 10:07   ` Philipp Rudo
2018-02-14  7:35 ` [PATCH 00/17] Add kexec_file_load support to s390 Dave Young
2018-02-14  7:35   ` Dave Young
2018-02-14  7:35   ` Dave Young
2018-02-14  9:54   ` Philipp Rudo
2018-02-14  9:54     ` Philipp Rudo
2018-02-15  5:08     ` AKASHI Takahiro
2018-02-15  5:08       ` AKASHI Takahiro
2018-02-23  8:34     ` Dave Young
2018-02-23  8:34       ` Dave Young
2018-02-23 10:01       ` Philipp Rudo
2018-02-23 10:01         ` Philipp Rudo
2018-02-24  1:59         ` Dave Young
2018-02-24  1:59           ` Dave Young
2018-02-26  1:21           ` AKASHI Takahiro
2018-02-26  1:21             ` AKASHI Takahiro
2018-02-26 11:16             ` Philipp Rudo
2018-02-26 11:16               ` Philipp Rudo
  -- strict thread matches above, loose matches on Subject: below --
2018-02-02 13:07 Philipp Rudo
2018-02-02 13:07 ` [PATCH 07/17] kexec_file: Simplify kexec_purgatory_setup_sechdrs 1 Philipp Rudo
2018-02-02 13:07   ` Philipp Rudo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180212100754.55121-8-prudo@linux.vnet.ibm.com \
    --to=prudo@linux.vnet.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=bauerman@linux.vnet.ibm.com \
    --cc=ebiederm@xmission.com \
    --cc=heiko.carstens@de.ibm.com \
    --cc=kexec@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=schwidefsky@de.ibm.com \
    --cc=vgoyal@redhat.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.